Installation engineer jobs in ManchesterCreate job alerts

Calling all Commissioning and Qualification Engineers who have worked on high end capital equipment within the Pharma, Cosmetics or Food and Beverage industry. I want to speak to you about a critical role. Our client who supplies reference level process manufacturing equipment from their European principal suppliers to top tier pharmaceutical manufacturers in the UK and Ireland are looking to appoint a highly skilled and experienced Commissioning Engineer to work on the high profile projects. The projects can range from low complexity modifications to larger capital equipment contracts which are in the range of £250k-£2m and typically have a 2month design phase, 4month build phase and a 5-12 month installation, testing and qualification stage. As part of the Operations Team the C&Q Engineer will provide pre-delivery testing, installation, re-assembly, start up, commissioning, IQOQ, cycle development, novel project works and breakdown support in line with contractual commitments. The role is site based and involves frequent travel and stays away. Our client are technical experts in their field and this customer facing hands on technical role is crucial to delivering compliant projects to agreed scope and timelines. Key Attributes • Excellent written and spoken English & communication skills, Excellent customer handling, planning and organisational skills, • An engineering or technology qualification (degree or equivalent), • Must have an analytical way of thinking and understand how process equipment works and interacts with its environment., • Must like the challenge of working with bespoke equipment where bugs are not all found before delivery and where commissioning could be seen as the final part of the design-set-up of customised plant. Therefore, the operation of all our equipment needs to be understood from core principles rather than reading from a manual or work repetition., • High attention to detail with the ability to pre-empt problems and seek solutions, • Must have a good understanding of automation/controls technology and mechanical/electrical engineering. Knowledge of sterile process technology and pharmaceutical industry would be useful., • Minimum 5 years’ experience in similar site role., • Must be able to demonstrate proficiency with commonly used computer programs. These include MS Windows, MS Word and MS Excel, • Able to work effectively and efficiently autonomously whilst being an integral part of a team, • Frequent travel and stays away of multiple consecutive weeks are a fundamental element of the role. Normally travel will be within the UK and Ireland but occasional travel to elsewhere in Europe can be expected, • Must have a flexible and adaptive attitude and be able to work on own initiative, sometimes under pressure, • Have a full and clean driving licence, • Hold a valid passport for travel within Europe Job Description Role Reporting to the Technical Manager and working closely with the Project team and Technology SME’s the C&Q Engineer in engaged with the installation, commissioning, testing, optimisation and validation of process equipment to make sure it is functioning correctly and produces the expected results. In doing so the C&Q engineer brings an item of equipment or a system to the point at which it can be used most effectively, the C&Q engineer must therefore possess a thorough understanding of the equipment design, its intended use and what Steritech are committed to provide. Primary: (in no particular order) • Provide installation, re-assembly, start up, commissioning, IQOQ, cycle development, novel project works and breakdown support in line with contractual commitments and to a standard consistent with the high quality of the equipment and services our client supply, representing the company in a professional and dutiful manner at all times., • Role specific administration such as reporting, invoicing, expenses, and time sheets, • Effective communications to our customers, internally at our client and with their suppliers., • Proper and conscientious management when in control of our clients equipment, including test equipment, computer equipment etc., • As requested by management be an active contributor in new equipment design qualification process discussions, • When requested by management support colleagues in meetings where expertise/experience can be beneficial e.g., Risk Assessment, FMECA, HAZOP and RCA, • In the pursuit of site activities be a front-line interface with principal supplier automation, engineering and process departments. Disseminate information as required, • Provision of Technical Support to both to customers and internally to colleagues, • Support the wider operations teams through the provision of routine services as and when requested e.g., equipment maintenance, calibration and technical intervention services Secondary: (in no particular order) • Train and gain experience in the equipment and services our client offers, plus the market and expectations of our customers., • Contribute to other departments initiatives (technical research, training preparation and/or delivery, special project management, documentation improvements, technical report preparation etc.), • Any other tasks as may be reasonably required.

Manufacturing Engineer Stockport Up to £55,000 plus excellent benefits including… • 25 days holiday + 8 bank holidays., • 7% employer pension contribution, 4% employee contribution., • 4 weeks sick pay after probation increasing to 8 weeks with service., • Cycle to work scheme., • Life assurance – 4x annual salary., • Half day Friday., • Wellness programme. Are you a hands-on engineer ready to take on a pivotal role in transforming manufacturing operations? We’re looking for an Manufacturing Engineer to lead the planning and installation of robotic welding cells—a major capital investment project aimed at enhancing quality, repeatability, and efficiency across our fabrication lines. This is a unique opportunity to play a leading role in driving automation and continuous improvement within high-impact programmes. Key Responsibilities Lead the Robotic Welding Cell Project – Manage all stages of the project, from planning and procurement through to installation, commissioning, and full integration into the manufacturing workflow. Develop Manufacturing Solutions – Resolve build and quality issues with practical, shop-floor-tested solutions across fabrication and assembly environments. Implement Automation – Explore and deliver automation strategies that drive improvements in welding consistency, safety, and throughput. Process Optimisation – Improve dimensional stability through effective jig and fixture design, and data-driven manufacturing process enhancements. Reduce Build Hours and Waste – Apply lean principles to reduce cycle time, tact time, and improve first-time pass rates. Support Capital Investment Initiatives – Collaborate with cross-functional teams to deliver successful outcomes on strategic investment projects. Design for Manufacturability – Provide early input into product design to ensure ease of manufacture and assembly. Standardise and Document – Develop and maintain standard operating procedures and technical documentation. What We’re Looking For • Degree or HND in Mechanical or Manufacturing Engineering (or equivalent)., • Demonstrated success delivering large-scale automation or capital projects., • Experience & knowledge of robotic systems., • Deep understanding of welding processes., • Skilled in interpreting welding drawings and GD&T., • Strong data analysis capabilities related to cycle time, RFT, and tact metrics., • Excellent communication, problem-solving, and cross-functional collaboration skills., • Practical understanding of lean manufacturing and health & safety standards., • Knowledge of the latest developments in robotic welding and fabrication. Why Join Us? You’ll be part of a forward-thinking team at the forefront of automation and modern manufacturing, working on projects that directly impact the delivery of advanced engineering solutions. We offer a dynamic environment, opportunities for professional growth, and a chance to lead in the adoption of cutting-edge technologies.

Job Title: Fire & Security Service Engineer Location: Manchester based Salary: £33,000 - £40,000* Employment Type: Full time, Permanent Introduction Matic Building Services is a growing mechanical and electrical contractor within The Domis Group, delivering high quality building services across major residential, commercial and mixed-use developments. We are now seeking an experienced Fire & Security Service Engineer to join the Matic Life Safety Systems team. This is a varied, hands-on role supporting the delivery of planned preventative maintenance, reactive call-outs, fault finding, small works installations, servicing, maintenance and commissioning across life safety systems. You will work across a wide range of environments, from live sites and occupied buildings to busy construction projects, helping to ensure fire and security systems are installed, maintained and delivered to the highest standards. No two days are the same, making this a strong opportunity for an engineer who enjoys variety, problem solving and working across projects from start to finish. Key Responsibilities: • Carry out routine servicing, testing, inspection, repairs and installation of fire and security systems, • Deliver planned preventative maintenance, reactive call-outs, fault finding and first-time fixes where possible, • Complete ongoing small works installations for Matic Life Safety Systems, • Support commissioning and installation teams across busy construction sites, • Carry out site service visits, engineering audits and system inspections, • Work across life safety systems, CCTV, intruder alarms, access control and associated equipment, • Ensure all works are completed in line with relevant legal, regulatory, legislative and industry standards, • Produce accurate job reports, audit paperwork, job sheets and technical documentation, • Assist with aftercare and technical support across fire and security disciplines, • Ensure customer, contractor and project team queries are dealt with in a timely manner, • Communicate effectively with internal teams, customers, project management teams and department leads, • Work collaboratively within a team covering a defined geographical area, • Support and lead subcontractors, installation engineers and trainee engineers where required, • Assist other teams during periods of absence, sickness, leave or high workload, • Maintain high standards of workmanship, customer service and team working practices, • Attend and participate in company training to maintain up-to-date technical knowledge, • Comply with all company policies, including HR, health and safety and information security procedures, • Protect sensitive customer information and company assets at all times, • Report security risks, incidents or potential incidents in line with company procedures, • Undertake any other reasonable duties as required by management Requirements: • Experience across multiple disciplines including life safety systems, fire alarms, CCTV, intruder alarms and access control, • Previous experience carrying out PPM, reactive calls and small works within the fire and security systems industry, • Strong fault-finding skills with a focus on first-time fix resolution, • Service, test and inspection experience to relevant standards and codes, • Experience writing clear and accurate technical reports, job sheets and audit paperwork, • Ability to work to high health and safety standards, • Basic Microsoft Word and Excel knowledge, • Experience using job management systems is advantageous, • Network and IP based product experience is advantageous, • Strong interpersonal and communication skills, • Customer focused with an excellent telephone manner, • Ability to prioritise workloads and meet deadlines, • Ability to work independently, take initiative and work with limited supervision, • Collaborative team player with the ability to support colleagues and share technical knowledge, • Good judgement and the ability to make decisions under pressure, • Reliable, organised and proactive with a strong work ethic, • Valid, clean UK driving licence, • Ability to build and maintain strong relationships with clients, colleagues and contractors, • Experience working with systems such as Advanced, Hochiki, Comelit, Paxton, Texecom, Hikvision and GENT is advantageous Personal Attributes & Desired Behaviours Integrity: Works safely, responsibly and professionally, ensuring all activity is completed in line with company, regulatory and industry standards. Ownership: Takes accountability for service delivery, fault finding, documentation and the successful completion of assigned works. Together: Works collaboratively with Matic teams, customers, project teams, subcontractors and trainees to achieve shared project outcomes. Trust: Builds confidence with clients, contractors and colleagues through reliable communication, high quality workmanship and consistent follow through. Adapt: Responds positively to changing site demands, reactive call-outs, technical challenges and shifting project priorities. Respect: Treats customers, colleagues, subcontractors and site teams with professionalism and courtesy, representing Matic to a high standard at all times. Why Join Us? Join a growing Life Safety Systems team within a fast-moving M&E contractor. Work across varied projects, environments and technical challenges. Take the lead on small works, servicing, maintenance and commissioning activity. Develop your skills across fire, security, CCTV, access control and life safety systems. Be part of a team focused on quality, technical excellence and practical delivery. Support high profile construction projects from installation through to aftercare

Job Title : Deskside Support Engineer -Key Skills: Windows 11, Intune, ITIL , ServiceNow, MECM (SCCM) -Experience: 7+ Years -Location: Manchester, UK -Mode: Full time We at Coforge are seeking “ Deskside Support Engineer ” with the following skill-set: Mandatory Skills • Windows 11, • MECM (SCCM), • Intune, • Office 365 (O365), • ITIL, • Problem Management, • ServiceNow, • Application Deployment, • Hardware Repair Position Overview We are seeking a highly skilled and detail-oriented End User Computing (EUC) Engineer to join our existing DSS team. In this role, you will be responsible for supporting business users with IT-related issues and ensuring smooth day-to-day operations. You will play a key role in new joiner onboarding, meeting room support, system reimaging, application installation, printer support, and Windows 11 environments across the organization. Strong expertise in Windows OS, Mac OS, system configuration, and troubleshooting will be critical for success in this role. Key Responsibilities 1. Reimaging Machines • Manage reimaging of laptops and desktops using SCCM (PXE)., • Maintain a stock of prebuilt spare machines for quick replacement and user allocation. 1. User Onboarding and Offboarding • Set up devices for new joiners, including first-time login, MFA configuration, and account setup., • Update CMDB with accurate asset and user details. 1. Troubleshooting and Support • Provide advanced-level support for operating system and Office-related issues., • Troubleshoot OS installations, application compatibility issues, and driver conflicts. 1. Application Deployment • Install, configure, and support enterprise applications., • Ensure smooth deployment through MECM/Intune. 1. Hardware and Peripheral Support • Diagnose and repair hardware issues (laptops/desktops)., • Provide printer and meeting room support. 1. Documentation • Create and maintain detailed technical documentation, SOPs, and knowledge base articles. Key Skills & Competencies • Strong troubleshooting and problem-solving skills, • Excellent communication and stakeholder management, • Ability to work in a fast-paced, user-facing environment, • Attention to detail and adherence to ITIL processes

An established engineering and infrastructure delivery organisation is seeking an experienced Senior EC&I Designer to support the delivery of complex industrial and energy-sector projects across the UK. This is a contract role and can be outside ir35. Suited to a motivated designer with strong experience in Electrical, Control & Instrumentation (EC&I) design, capable of producing high-quality technical deliverables while supporting junior team members and collaborating across multidisciplinary engineering teams. Key Responsibilities • Produce safe, practical and cost-effective EC&I design solutions in line with project and company procedures, • Develop design deliverables including:, • Loop diagrams, • Block cable diagrams, • Schematic diagrams, • 3D models, • Prepare associated documentation such as:, • Bills of materials, • Cable schedules, • Design packs, • Material requisitions, • Support proposal and project activities as assigned by the Lead or Chief Engineer, • Mentor and support less experienced designers, • Review and check drawings in accordance with internal quality procedures, • Liaise effectively with multidisciplinary engineering teams and stakeholders, • Ensure designs are developed with safety, operability and risk management at the forefront, • Promote safe working practices and ensure personnel are appropriately briefed and supported Requirements • ONC / OND / HNC / HND or equivalent engineering qualification, • Minimum 4 years’ experience in a similar EC&I / industrial design environment, • Strong understanding of design working practices and installation requirements across industrial sectors, • Proficiency in CAD software and 3D modelling tools, • Experience with AVEVA PDMS is highly desirable, • Knowledge of UK engineering legislation, standards and regulations, • Strong communication and collaboration skills Only those with proof of right to work in the UK should apply for this role.

Manufacturing Engineer - Automation To £60k + Benefits. Greater Manchester. Ref: 25440 Attractive Pension (4% Employee Contribution, 7% employer contribution) Half-day Friday, Employee Assistance, Additional Holidays & Long Service Rewards, Life Assurance, Wellbeing Initiatives, Cycle to Work Scheme, Free on-site Parking, On-site EV Charging points This is an exciting opportunity for an experienced Manufacturing Engineer to join a highly advanced operation, supporting the implementation of automated welding, robotic assembly and large-scale production projects. Working within a dedicated Engineering team, you’ll play a key role in developing innovative solutions, improving production efficiency and supporting the introduction of cutting-edge robotic systems within a complex engineering environment. Manufacturing Engineer - The Role: • Identify and implement automation opportunities across welding and fabrication operations, • Support specification and procurement of robotic welding cells, CNC fabrication centres and automated handling systems, • Lead installation, commissioning and Site Acceptance Testing (SAT) activities, • Develop and optimise robot programs for complex manufacturing applications, • Utilise Off-Line Programming (OLP) software to minimise downtime during new product introduction (NPI), • Troubleshoot PLCs and HMI systems to support automated manufacturing processes, • Analyse production data to improve cycle times, efficiency and product quality, • Apply Lean Manufacturing and continuous improvement methodologies, • Develop SOPs, FMEAs and technical documentation for automated systems, • Support cross-functional engineering, production and maintenance teams Manufacturing Engineer - What We’re Looking For: • HND or Degree in Manufacturing, Engineering or Mechatronics, • Experience with industrial Robotics (ABB) and PLC systems (Siemens), • Background within automated manufacturing or engineering environments, • Strong understanding of Lean Manufacturing and process optimisation, • Experience with NPI, automation integration and production improvement activities, • Strong analytical and problem-solving skills, • Ability to work collaboratively across engineering and production teams, • Knowledge of manufacturing safety and compliance standards Desirable experience includes: • Robotic welding, CNC machining or automated fabrication systems, • Six Sigma or Lean certification, • Industry 4.0 or digital manufacturing technologies, • Heavy manufacturing experience within defence, automotive or aerospace sectors Why Join? • Work on advanced automation and robotic manufacturing technology, • Opportunity to lead innovative automation and continuous improvement projects, • Technically challenging environment with excellent long-term career development, • Strong collaborative engineering culture, • Exposure to large-scale manufacturing and advanced production systems, • Opportunity to influence future manufacturing processes and operational excellence Interested? Located in Greater Manchester, this role would be commutable from Manchester, Oldham, Stockport, Rochdale and other surrounding areas If you’re looking for a role where you can combine automation expertise, robotics and manufacturing innovation within a highly advanced engineering environment, we’d love to speak with you, contact Sharon Hill on 01902212000 or 07764208419 or email your interest to sharon.hill@automationexperts.co.uk

A well-established building services consultancy has an immediate requirement for an intermediate level electrical engineer to join their office in ManchesterYour responsibilities would include:Supporting the Senior Engineers, Associates, and Directors in undertaking electrical design and consultancy work, producing electrical design drawings, calculations (using Amtech, Hevacomp, IES, Relux, and Dialux software, etc), reports, specifications and schedules, systems designLiaising with other design team members internal and external, represent the business at meetings where appropriate.Fulfilling the technical responsibilities of an Electrical Engineer including but not limited to:Carrying out surveys of existing facilities and preparation of survey reportsAssisting with early-stage design works, load estimates and assessment of plant area spatial allowancesProvision of design calculationsAssisting in the development of design solutions to comply with all recognised standards and Building Regulations, including Part F/ Part L / Section 6 requirements, etc,Assisting in the production of reports as required, including relevant supporting documentation required for BREEAM accreditationSupporting project risk assessments to ensure safe installation and operation and in compliance with CDM legislation.Production of CAD drawings and provision of all support to produce satisfactory detail drawings as required for tender, construction, or other purposesAssisting in the production of project specifications and schedules, adapting standard specification information where possibleAttending and contributing to design team and project meetingsAssisting in undertaking site supervision duties as necessary to ensure works are installed in accordance with contract documentation and good engineering practiceAssisting in witnessing the testing, proving, and commissioning procedures of final installations as required, etc.Contributing to ensure the application and maintenance of all Integrated Management System proceduresCarrying out all personal management duties including weekly recording of man-hour commitments to individual projectsIn return they offer a very attractive salary/benfits package.

Installing and commissioning a variety of fire and security systems, including fire alarms, intruder alarms, CCTV, and access control. Fire and Security Installation Engineer - £35,000 to £43,000 Basic - Manchester. Fire and Security Installation Engineer Company Overview:.

Your Role of as Installation Engineer:. The Ideal Background for Installation Engineer:. The Company recruiting for the Installation Engineer:.

As they expand, they are looking for both a Senior Engineer and a Field Service Engineer to join their dynamic team. Field Service Engineer: Provide on-site installation, maintenance, and troubleshooting of machines at client sites. Field Service Engineer: Hands-on experience with industrial equipme

Junior, Trainee, Support, Radio, Two-way communications, PMR, DMR, Telemetry, Field-based, Engineering, Engineer, Tetra Microwave Infrastructure, Design, Installation, Install, Maintenance, Service, Field-based, Servicing, Systems, Motorola, Portable, Bench, Test Equipment, Technical, PASMA, CSCS,

Senior Fire Commissioning / Installation Engineer.

Commissioning Engineer - Remote (UK-Based) - Global Travel Required Are you an experienced Commissioning Engineer ready to take on a global challenge? We are looking for a motivated and technically skilled individual to join our dynamic team, delivering world-class process engineering projects across EMEA, APAC, and beyond primarily in the food & beverage industry. What You’ll Do: Depending on project needs, you may be deployed as a Process Commissioning Engineer, Commissioning Team Leader: • Lead Installation and Operational Qualification (IQ/OQ) activities on client sites worldwide, • Commission and start up process plants, including utilities, MCC panels, instrumentation, and control systems, • Troubleshoot mechanical, hydraulic, thermal, and electrical issues on-site, • Manage and coordinate commissioning teams and contractors across complex, multi-disciplinary projects, • Deliver customer training and support first production runs, • Produce detailed commissioning reports and weekly project updates, • Ensure strict compliance with health, safety, and contractual requirements on every site What We’re Looking For • Degree-level qualification in Engineering, Food Technology, or Dairy Technology (or equivalent), • Minimum 4 years’ experience in Process Engineering or Commissioning roles, • Strong technical skills across mechanical, electrical, and instrumentation disciplines, • Excellent communication skills in English (spoken and written), • Confident working autonomously on international sites and managing stakeholder relationships, • Full willingness to travel globally — role requires approximately 80% travel Working Pattern: Remote-based in the UK with approximately 80% global travel. You’ll work across EMEA and APAC regions, spending extended periods on client sites as projects demand.

FIELD SERVICE ENGINEER - PERMANENT POSITION We are currently recruiting for a hands-on Field Service Engineer to support the deployment, maintenance, and optimization of an advanced vision-based Real-Time Location System (RTLS) across customer sites throughout the UK logistics sector. This customer-facing role combines installation, commissioning, fault finding, and ongoing technical support for cutting-edge AI-powered camera systems designed to improve operational safety and productivity in industrial environments. As a Field Service Engineer, you will work directly on customer sites, carrying out equipment installation, system configuration, diagnostics, preventative maintenance, and troubleshooting activities. You will act as a key technical contact for customers, ensuring systems operate reliably while delivering a high standard of service and support. The role offers exposure to advanced technologies including computer vision, AI-driven tracking systems, industrial networking, and safety solutions. You will work closely with internal engineering, product, and commercial teams, providing valuable field feedback to support continuous product improvement. This is a varied and highly practical role involving regular UK travel, customer interaction, and opportunities for long-term technical development as the business continues to grow. Key Responsibilities: • Install, configure, test, and commission RTLS hardware and software systems at customer locations., • Carry out on-site fault finding, diagnostics, and repairs to ensure maximum system uptime., • Provide first-line and second-line technical support to customers both remotely and on-site., • Perform preventative maintenance, system health checks, and performance optimisation activities., • Support customer training and handovers following installation and commissioning., • Work closely with customers to resolve technical issues quickly and professionally., • Assist with system upgrades, software updates, and configuration changes., • Complete service reports, installation documentation, and technical records accurately., • Support technical demonstrations and occasional trade show or customer event activities., • Collaborate with engineering and product teams to escalate recurring issues and provide field feedback., • Ensure all work is completed in line with health & safety and site compliance requirements., • Travel regularly across the UK to support customer sites as required. Skills & Qualifications: • 2+ years of experience in a Field Service Engineer, Service Technician, Installation Engineer, or similar technical role., • Degree, HNC/HND, apprenticeship, or equivalent qualification in Engineering, Electronics, Electrical Engineering, Mechatronics, or a related discipline., • Strong hands-on electrical, electronic, or electro-mechanical troubleshooting skills., • Experience working with industrial systems, CCTV/camera systems, networking, automation, or related technologies would be advantageous., • Interest in technologies such as computer vision, AI systems, RF technologies, and industrial safety applications., • Ability to diagnose and resolve technical faults independently in customer-facing environments., • Strong organisational and time-management skills with the ability to manage multiple service activities., • Comfortable working independently and travelling regularly to customer sites., • Excellent communication and customer service skills., • Good working knowledge of IT systems and networking principles., • Experience with Linux and Python would be beneficial but not essential., • Full UK driving licence and willingness to travel extensively across the UK., • Fluent in English, both written and spoken. The Offer: • A permanent, full-time employment contract, • A salary & benefits package commensurate with experience Please send over your CV to tom.walker@vividresourcing.com or call me on +32 (0) 3 318 00 74. As always, we are open to recommendations, so please feel free to pass this on to other suitable candidates.

Cooling Engineer, Datacentre / Server / HPC Multiple EU sites - Our client is a global technology leader that designs, develops, and manufactures IT hardware and software. Last year they posted revenue at nearly $70 billion! This is to work as part of an EMEA Power and cooling team but focusing on the fast growing AI ready datacentre business. . You will have an understanding of data center and IT solution power delivery architectures; cooling architectures and heat transfer. You can be based anywhere in Europe but must be open to a degree of international travel. Main elements to get involved with: • liquid cooling experience, • Decipher complex RFP requirements related to facility cooling infrastructure and help IT architects design an IT solution that fits within those limitations., • Architect complex power and cooling solutions for air and water-cooled IT solutions., • Be actively involved in the physical installation of complex IT system that are air or water-cooled., • Be able to provide engineering guidance over a wide range of disciplines (power/electrical, mechanical, thermal, plumbing, controls). Great opportunity with one of the leading players in the AI Datacentre market! Contact me ASAP for more details on the amazing team and company. Xavier

Senior Project Engineer Location: Aberdeen/Liverpool Job Type: Permanent, Full-time (Hybrid Flexibility) Salary: Competitive Are you an experienced Project Engineer ready to support key subsea energy projects? Do you thrive on offshore execution, technical assurance and quality? Then this sounds like the perfect role for you! Key Responsibilities • Provide engineering support during tendering and project delivery phases., • Lead project kick-off activities and coordinate technical deliverables, schedules, and documentation., • Prepare and review offshore construction, fabrication, installation, and inspection documentation., • Coordinate with clients, subcontractors, offshore vessels, and internal teams to ensure successful project execution., • Review lifting plans, vessel deck layouts, and offshore procedures to ensure safe and compliant operations., • Provide technical support during offshore activities and resolve engineering queries., • Manage offshore construction schedules, project reporting, and as-built documentation., • Support equipment hire coordination, including on-hire/off-hire activities., • Mentor junior engineers and support workload/resource planning within the engineering team., • Ensure compliance with company QHSE standards, BMS procedures, and contractual requirements. Skills & Experience • ROV/Diving experience, • 5+ years’ experience within subsea operations, offshore construction, renewables, or oil & gas., • Degree-qualified in Engineering or equivalent industry experience., • Strong understanding of subsea/topside installation techniques, rigging, sea fastening, and offshore operations., • Proficient in CAD/design software and Microsoft Office applications., • Strong organisational, communication, and stakeholder management skills., • Self-motivated with the ability to manage priorities and work independently. Desirable • Current Offshore Survival & Firefighting certification., • Current Topside Medical certificate, • Degree in a relevant engineering discipline or industry experience in a related field If you’re ready for your next career move, then please apply below or forward your CV to ahaddock@insignistalent.com!

Project Engineer Location: Aberdeen/Liverpool Job Type: Permanent, full time (Hybrid Flexibility) Salary: Competitive Are you an experienced Project Engineer ready to support key subsea energy projects? Do you thrive on offshore execution, technical assurance and quality? Then this sounds like the perfect role for you! Key Responsibilities • Support tendering activities through technical review and engineering input., • Lead project kick-off meetings and coordinate project deliverables, schedules, and documentation., • Prepare and manage offshore construction, fabrication, installation, and inspection documentation., • Coordinate with clients, subcontractors, vessel crews, and internal teams to ensure smooth project execution., • Review vessel deck layouts, lifting plans, and offshore procedures to ensure safe and compliant operations., • Provide technical support during offshore activities and resolve engineering queries., • Maintain accurate project records, daily progress reporting, and as-built documentation., • Promote continuous improvement through lessons learned and technical feedback., • Ensure all activities comply with QHSE standards, company procedures, and contractual requirements. Skills & Experience • Degree-qualified in Engineering or equivalent industry experience., • Experience in subsea/offshore project engineering or offshore construction activities., • Knowledge of subsea installation techniques, rigging, sea fastening, fabrication, and offshore operations., • Proficient in CAD/design software and Microsoft Office applications., • Strong organisational, communication, and stakeholder management skills., • Ability to work independently and collaboratively in a fast-paced offshore project environment. Desirable • Current Offshore Survival & Firefighting certification., • Current Topside Medical certificate., • ROV/Diving Experience If you’re ready for the next step in your career then please apply below or forward your CV to ahaddock@insignistalent.com!

Service Engineer – Scientific Instruments Do you enjoy the practical hands-on elements of engineering and have the desire to work on industry-leading, highly complex equipment? Ready for your calling? This specialist instrument provider is searching for a well-rounded Service Engineer to join their team. (Equipment training and certification provided). Why This Company? Recognised for providing industry leading technology coupled with a fantastic aftercare service, my client has seen significant year on year growth. In line with the acquisition of new customers, they now wish to further enhance the UK service operation. As an investor in staff, they provide the one-to-one support and training needed to progress a long-term career within their organisation. Rewards & Benefits • £40K - £50K Basic Salary, • 10% Bonus, • Hybrid / Electric Company Car, • Company Expense Card, • Pension, • BUPA Healthcare, • 25 Days Holiday + Public Holidays, • Fantastic training program About The Role As a Service Engineer you will work from a home office and cover the UK / Ireland. Responsibilities include: • Occasional trips to support the European service team when needed. (1 trip per quarter)., • Due to the complex nature of the equipment and the potential travel time, you will typically attend 2-3 customer sites per week. Any travel is conducted Mon-Fri and therefore doesn’t encroach onto the weekends., • Operating from a home office and visiting customers to complete new equipment installations, commissioning and user training. Some of the more advanced equipment can take up to 2 days to complete an installation and also 2 days for planned preventative maintenance., • Visiting major industry and academia clients (universities)., • Liaising with customers directly to schedule the service visit., • Decommissioning equipment for site relocations., • Conducting routine service and calibration work, alongside more reactive maintenance, including fault finding and problem resolution., • Working on equipment including both hardware and software ranging from £60K to £250K in value., • Completing service report visits., • Handling service tickets, gaining the equipment log file and using TeamViewer where possible to gain remote access to their equipment., • If on the rare occasion you aren’t able to resolve the issue on customer site, you will organise for the equipment to be sent to my clients’ service centre and attend to do further investigation. About You The successful candidate will possess at least 2-3 years of service engineering experience, gained working on complex equipment, which could include but not limited to, Analytical Instruments, High Vacuum Equipment, Optical Microscopes, Laser Deposition, Sample Preparation, Electron Microscopes, Spectrometers, X-Ray CT Systems, MRI Scanners, Particle Accelerators, Particle Analysis instruments or similar. A degree level education is beneficial, but not essential. It is, however, essential you have a logical and methodical approach to finding faults, an open communication style, and be comfortable spending on average of 2-3 nights per week away from home. A UK driving license is essential, as is the rights to work in the UK. My client doesn’t offer sponsorship. ---------------------------------------------------------- Interested in this role? Here’s what happens next… Click the apply button to send us your CV. If we think you’re a great fit for this role, we’ll be in touch in the next couple of days. Thank you for taking the time to read about this opportunity. We look forward to hearing from you, Team Mase. ---------------------------------------------------------- Job Ref: 167-5623-LI Service Engineer – Scientific Instruments Location: Based in the Northwest, Yorkshire, East or West Midlands (UK / Ireland travel required) Keywords: Service Engineer, Field Engineer, Senior Engineer, Technical Support Engineer, Installation Engineer, Support Specialist, Technical Specialist, Engineering, Mechanical Engineering, Electrical Engineering, Electronic Engineering, Mechatronic, Physics, Chemistry, Metrology, Material Science, Robotics, Motion Control, Laser Technology, X-Ray CT Equipment, Electron Microscopy, SEM, TEM, Analytical Instruments, Particle Analysis, Magnetics, Electrical Discharge, Photonics, Spectroscopy, Spectrometry, MRI Scanners, Optical Microscopes, XRF, XRD, High Vacuum, UHV

EV Charging Electrical Engineer – Renewables & EV Charging Location: Milton Keynes and South (Southeast, London, Kent) - Nationwide Travel as Required Field-Based | Permanent | Full Time Up to £55,000 + Overtime + Company Van About the Opportunity We are supporting a rapidly growing engineering and infrastructure business delivering renewable energy and EV charging projects across the UK. The business operates nationally across electrical infrastructure, renewables and energy solutions, with a dedicated clean energy division focused on the deployment, maintenance and operation of commercial EV charging infrastructure. Due to continued growth and increasing project demand, they are looking to hire an experienced EV Charging Electrical Engineer to support installation, commissioning, maintenance and fault response activities across a growing portfolio of commercial EV charging projects. This is an excellent opportunity to join a growing renewables division delivering large-scale electrification infrastructure for commercial, industrial and public sector clients. The Role The role is heavily focused on the delivery of commercial and industrial EV charging infrastructure projects, primarily across the Southeast, London and Kent regions with nationwide travel as required. You will be responsible for the installation, testing, commissioning, maintenance and fault-finding of AC and DC charging systems, supporting both new infrastructure deployments and operational charging assets. This role would suit someone with strong commercial electrical installation experience and hands-on EV charging infrastructure knowledge, particularly across rapid DC charging systems. Domestic EV charging experience alone will not be considered. Key Responsibilities Installation & Commissioning • Install and commission commercial EV charging infrastructure across sites in the Southeast and beyond, • Install cabling, containment, distribution equipment and associated electrical infrastructure, • Carry out testing, inspection and commissioning activities in line with BS7671 requirements, • Support charger configuration, commissioning and operational handover activities, • Ensure installations are delivered safely, efficiently and to required quality standards Maintenance & Fault Finding • Carry out planned preventative maintenance (PPM) across EV charging assets, • Diagnose electrical and charger-related faults across operational infrastructure, • Conduct reactive repair works and emergency fault response activities, • Replace defective charging equipment and associated components, • Complete service documentation, test certification and maintenance reporting Operational Support • Work collaboratively with project managers, engineers and operational delivery teams, • Support site surveys, technical assessments and installation planning, • Maintain strong client communication and professional site representation, • Ensure compliance with RAMS, permits and company health and safety procedures Experience Required Essential • Proven experience as an EV Charging Electrical Engineer within commercial or industrial environments, • Strong installation background across EV charging infrastructure projects, • Experience with maintenance, fault-finding and commissioning of EV charging systems, • Strong understanding of BS7671 and electrical compliance procedures, • Experience working with commercial electrical installations and testing processes, • Ability to read and interpret electrical drawings and technical specifications, • Full UK Driving Licence Qualifications Required • ECS Gold Card / CSCS Card, • 18th Edition Wiring Regulations, • City & Guilds 2391 Inspection & Testing, • EV Charging Qualification (large-scale commercial preferred), • Level 3 Electrical Qualification, • SSSTS Highly Desirable Experience • Experience with Alpitronic, Kempower, Autel or ChargePoint systems, • Experience with rapid DC charging infrastructure, • IPAF or PASMA certifications, • Experience working across nationwide operational projects Package & Benefits • Up to £55,000 base salary (experience dependent), • Overtime opportunities, • Company van (Ford Transit or similar), • Overnight stayover allowance - £70 per night plus hotel and food expenses, • Nationwide project exposure, • Opportunity to join a rapidly growing renewables and EV infrastructure business, • Long-term progression opportunities within a scaling clean energy division If this opportunity is of interest please apply directly or email george.taylor@everec.co.uk

Better places, thriving communities. SENIOR COMMISSIONING ENGINEER Rock Power Connections Ltd Homebased/UK At Rock Power Connections, we owe our success to our staff. Within our Technical Operations business we are currently recruiting for a SENIOR Commissioning Engineer. This is your role. What part will you play? • To act as Commissioning Engineer undertaking commissioning activities / duties on a wide range of distribution power system plant, control and protection and other substation equipment to a high level of competence. Responsibilities: Health, Safety, Environmental & Quality: • Attend company authorisation / induction courses as required by Rock Power Connections, • Ensure that personally held test equipment is maintained in good working order and within calibration and to issue for re-calibration within appropriate time scales, • Maintain a safety & zero lost hours culture for all related site activities through good housekeeping, adhering to site safety rules, wearing correct PPE, proactively identifying safety and environmental improvements, offering solutions to issues and corrections to hazards (if appropriate) and applying company specific safety rules. Testing & Commissioning: • Be flexible to travel across the UK when required with fair and reasonable notice, • To attend Commissioning Panel Meetings as required, • To take the role of Lead Commissioning Engineer on designated projects, coordinating and managing commissioning activities, whilst acting as a focal point for the customer, • Completion of Commissioning Inspections, off load commissioning and on load commissioning as identified under the relevant DNO/IDNO Procedures, • To prepare and collate commissioning documentation to be incorporated in to final project folders such as drawing mark-ups and test data / documentation, • To fulfil Commissioning Panel duties within competency e.g., production of commissioning programmes, commissioning method statements, inspection schedules, etc, within specified time scales, • To undertake and complete testing and final commissioning on a wide range of plant and equipment at various voltage levels including fault investigation, diagnostic activities and rectification of faults within competence in accordance with the client's specification and documentation, • To participate, undertake and support FAT's, • To support apprentice commissioning engineers as required and to act as a role Model Staff Development, • To identify and inform Head of Technical Operations when specific product related training is required in order to satisfactorily complete commissioning activities Day-to-Day Control: • Provide technical support and direction, within their competence, to Rock Power Connections Project Team members, including the application of technical standards, • To liaise and work with internal and client Design Engineers to resolve design related queries, • To undertake other activities which the Company may reasonably require to be undertaken on a temporary basis which are within an individual's area of competence, • To report progress and/or problems to the Site Manager or Operations Manager / Engineer responsible for project delivery, • Assist & support the Field team - technical queries, quality plans, project commissioning programs, RAMS & EHS (Environmental Health & Safety) objectives Role Requirements: Working Safely or equivalent i.e. Safety Passport • HNC / Degree in electrical engineering, • DNO Competent Person, • Knowledge of CDM regulations, • Demonstrable extensive experience working as a Commissioning Engineer in Electricity Supply Industry with exposure to LV, MV, HV & voltage schemes, • Demonstrable comprehensive experience of working on a range of protection schemes and protection relays, DC systems, AC systems including primary and secondary injection testing of complex protection schemes., • Demonstrable comprehensive experience of working on various types of power plant and equipment., • Proven fault-finding experience, • Understanding of permit control & Isolations for a variety of clients such as NGED, SSE etc Who are Rock Power Connections? Since our acquisition by the Mitie Group in 2022, we have completed some of our biggest projects to date. These include the installation of EV charging stations at some of the UK's busiest hubs and partnerships with high profile clients such as hi-speed rail network HS2 and Electric Highway Gridserve, whilst continuing to support and grow our long-standing place on the NGED (formerly WPD) framework agreement to deliver new substations, carry out asset replacement and reinforcement works from 11kV through to 132kV We have a lot to celebrate, with full order books, however, as with other successful companies, we face an immediate challenge – the high-quality skills shortage. It's a huge challenge and we're no exception. The green economy in particular offers us massive opportunities, but we are struggling to find the right people. Having the right people and culture has always been key to our success. Rock would not be where it is today without them. If we do say so ourselves, our employee value proposition is fantastic in terms of benefits, packages, learning and development. Our focus continues to be on quality skills and training, and we believe that the Mitie brand combined with our family friendly ethos gives us that competitive edge. Our Commitment to Diversity: Lucky for us, we are not all the same. Through diversity we generate power. We run on inclusion and our combined creative energy is fuelled by over 130 nationalities. Rock Power Connections celebrates character – no matter what ethnic background, gender, age, religion, identity, or disability. We energize society, all of society, and we do not discriminate based on our differences. Our market-leading offering provides you with benefits that suit your lifestyle. We have a virtual GP on hand for you and members of your household. So you can get expert advice by video or phone without having to leave your home. We offer financial wellbeing assistance through our Salary Finance scheme. For example, you could access 50% of your earned pay before payday for a small fee. Salary Finance also offers competitive loans. When you join us, we’ll give you a link to our flexible lifestyle benefits platform, Choices. You might choose to purchase up to five extra days’ holiday each year. You might buy critical illness insurance, seek dental treatment or buy technology products at an affordable cost. There are many choices! We give you access to high street discounts from thousands of well-known retailers, gyms and more through our MiDeals platform. And we have a cycle-to-work scheme. Life cover of up to four times your salary is available. We also offer enhanced pension contributions, a save-as-you-earn scheme, and a Mitie Matching Share Plan (you could even be awarded free shares in Mitie). We award our employees with Mitie Stars as recognition for their hard work. There are cash prizes up for grabs each month and at the end of the year there’s a chance to scoop a top prize of £10,000! Our success is a direct result of the experience and quality of our people. Progressing your career is therefore a top priority for us. We offer a diverse variety of training and development avenues via a wide selection of learning resources to suit you. Since 1987, Mitie’s 80,000 employees have been maintaining companies globally. We are the UK’s leading facilities management and professional services company, and our clients range from household names in banking, critical government sites as well as hospitals and schools. Join our Mitie Team. Together our diversity makes us stronger.

Senior Systems Engineer | Senior Automation Engineer | Senior Controls Engineer | SCADA | PLC | £50,000 - £65,000 | Office 2 days a week I am currently working with a leading engineering and maintenance provider, supporting customers across the nuclear, oil & gas, renewables and many more industries. With a global workforce focused on enhancing efficiency and implementing critical technology into these sites. This is a full-time, permanent role based in the Portsmouth area. My client is growing rapidly in the automation space and are therefore looking for an experienced Systems Engineer, with strong controls knowledge and experience across both SCADA systems and PLC's. The focus of this role is to help the team across a number of projects working closely with the Lead Engineer, Lead Project Manager and the more junior team to deliver across their clients in critical infrastructure. Essential Experience • A minimum 5 years’ experience with integrated control systems and automation, • Knowledge of the full project lifecycle, f4rom design to commissioning, • Development and deployment of detailed designs, • Extensive hands on experience of PLC's and SCADA systems eg. Ignition, AVEVA, Rockwell, Siemens or Schneider, • A good knowledge of Control panels with electrical installation and Instrumentation solutions. Nice to have • Industrial Protocol Knowledge (IEC 61850, DNP3, Modbus etc), • IOT and Edge Computing (NodeRed, MQTT etc), • IT/OT Convergence, • Network design and configuration, • Cyber Security If you think this is a good match please do not hesitate to apply and I will be in touch shortly for a detailed discussion.

Senior EICA Engineer (Contract) – Water Sector An engineering contractor is seeking a Senior EICA Engineer with strong experience in UK water projects to support delivery across multiple frameworks. This is a long term, contract with the option to be outside ir35. Remote workers may also be considered. Key Responsibilities • Produce cost-effective EICA design documentation, • Develop electrical, control, and instrumentation designs, • Conduct site surveys and attend FATs, • Review subcontractor designs and supplier quotations, • Ensure compliance with UK standards, legislation, and specifications, • Prepare technical documentation, equipment requisitions, and installation scopes, • Support construction and commissioning activities Requirements • Extensive experience in UK water sector projects (essential), • 10+ years’ engineering experience, • Strong knowledge of UK standards (including WIMES), • Experience with ATEX, CE marking, and hazardous area installations, • Understanding of HSE and risk management Qualifications • Degree in Electrical, Electronic, or Control Engineering (or equivalent experience) Profile • Strong communicator with a proactive approach, • Experience leading or delegating work, • Safety and client-focused mindset Only those with proof of right to work in the UK should apply for this role.

Senior Technical Engineer – Power Transformers (UK) I'm partnering with a global transformer manufacturer who are now expanding their UK footprint off the back of winning several key projects. This business can't sponsor or transfer VISAs for the UK, so when applying please ensure you have full rights to work in the UK. About the Company Our client is a globally recognised engineering and manufacturing organisation specialising in high-voltage power transmission and transformer technologies. With a strong track record delivering large-scale grid infrastructure projects worldwide, the company is known for its technical excellence, advanced manufacturing capabilities, and continued investment in innovation. As part of its growth strategy in the UK, the organisation is expanding its technical team to support increasing project demand across transmission and distribution networks. Role Overview The Senior Technical Engineer – Power Transformers will play a key role across the full lifecycle of transformer projects, from early-stage tendering and technical bid support through to project delivery, site installation, and commissioning. This is a highly technical, customer-facing position requiring close collaboration with commercial, engineering, and project teams to ensure successful execution of complex high-voltage transformer projects within the UK market. Key Responsibilities 1. Tendering & Technical Sales Support • Provide technical input during tendering and bid preparation phases, • Analyse customer specifications and develop compliant, competitive technical solutions, • Support commercial teams with technical presentations and clarifications 1. Project Engineering • Act as the technical lead throughout project execution, ensuring alignment with client requirements and specifications, • Review and approve designs, drawings, and engineering documentation, • Coordinate with global engineering and manufacturing teams 1. Client & Stakeholder Interface • Serve as the primary technical point of contact for clients, consultants, and EPC contractors, • Attend technical meetings and resolve engineering queries throughout the project lifecycle 1. Manufacturing & Factory Interface • Support factory activities including design validation, FAT (Factory Acceptance Testing), and quality assurance processes, • Ensure technical compliance and performance standards are met 1. Installation & Commissioning • Provide technical support during site installation and commissioning phases, • Troubleshoot technical issues and ensure successful energisation of equipment 1. Risk Management & Problem Solving • Identify and mitigate technical risks across project stages, • Lead root cause analysis for technical challenges and implement corrective actions Candidate Requirements • Bachelor’s degree or higher in Electrical Engineering or a related discipline, • Significant experience in power transformer engineering, ideally across both design and project delivery, • Proven involvement in projects spanning tendering through to commissioning, • Strong understanding of UK grid standards and utility requirements Desirable Experience • Experience working with DNOs, TSOs, or EPC contractors in the UK, • Familiarity with HV and EHV transformer systems, testing, and commissioning processes, • Exposure to international manufacturing or engineering environments Key Competencies • Strong technical expertise combined with commercial awareness, • Excellent stakeholder management and communication skills, • Ability to manage complex projects and multiple interfaces, • Problem-solving mindset with strong analytical capability, • Willingness to travel within the UK and occasionally internationally Why Apply? • Join a global leader delivering critical grid infrastructure projects, • Work across the full project lifecycle, from bid to energisation, • Be part of the UK market expansion with high visibility and impact, • Competitive salary and benefits package with long-term growth opportunities This business can't sponsor or transfer VISAs for the UK, so when applying please ensure you have full rights to work in the UK. Senior Technical Engineer – Power Transformers (UK)

EV Field Service Engineer - South East England - EV Charging - £42k + Car + Overtime (£60k OTE) Role: Field Service Engineer – EV Charging Infrastructure Location: South East England (London & Kent Coverage) Salary & Package: £42,000 Basic + Overtime + Standby + London Weighting + Vehicle (£55k to £60k OTE) Company Overview A rapidly growing EV infrastructure and engineering business delivering nationwide EV charging installation, maintenance, and operational support services across the UK. The company works with some of the UK’s largest commercial and public charging networks and is continuing to expand its field engineering team due to increasing project demand and long-term framework growth. Backed by a major international infrastructure and energy group, the business offers strong long-term stability, technical training, and progression opportunities within the fast-growing EV charging sector. The Role This is a field-based engineering role focused on the servicing, maintenance, commissioning, and fault-finding of AC & DC EV charging infrastructure across commercial and public charging sites throughout the South East region. The successful candidate will play a key role in ensuring EV charging equipment remains safe, compliant, and fully operational while delivering a high level of customer service on-site. This role would suit an electrically qualified engineer with strong testing, maintenance, and fault-finding experience who is looking to build a long-term career within EV charging and renewable energy infrastructure. Key Responsibilities • Service, maintain, repair, and commission AC & DC EV charging equipment, • Diagnose and rectify electrical and technical faults across charging infrastructure, • Carry out preventative maintenance, inspections, and compliance testing, • Complete digital service documentation and reporting accurately, • Ensure all work is completed in line with electrical regulations and health & safety standards, • Support reactive breakdowns and emergency callouts where required, • Build strong working relationships with customers and site stakeholders, • Represent the business professionally across customer sites Requirements Essential • ECS Gold Card (non-negotiable), • Full UK Driving Licence, • Strong electrical maintenance, testing, and fault-finding experience, • Ability to work independently in a field-based environment, • Strong communication and customer-facing skills, • Eligibility to work in the UK without sponsorship Desirable • Previous EV charging experience, • Inspection & Testing qualifications, • Experience working on commercial electrical systems, • Experience with AC/DC charging infrastructure or power systems Package & Benefits • Basic salary aligned to JIB industry rates (~£42,000 equivalent), • Overtime paid at time and a half from the first minute over contracted hours, • London weighting allowance where applicable, • Optional standby payments (£130 per day), • Realistic OTE of £55,000 – £60,000, • Company vehicle provided, • Pension scheme, • Healthcare package, • 24 days holiday + bank holidays, • Full manufacturer and EV charging training provided, • Clear long-term progression opportunities within a growing EV infrastructure business If this is of interest please apply on LinkedIn or email george.taylor@everec.co.uk

Senior EC&I Engineer Leading Consultancy | Water Sector | Manchester-based | Hybrid Working | Long-term Contract | Outside IR35 | Competitive Rate The Opportunity We're recruiting a Senior Electrical Engineer to take overall responsibility for electrical scope delivery across multiple water sector frameworks. You'll lead electrical design and engineering delivery on clean water and wastewater projects, managing schedules, technical documentation, team delivery and stakeholder engagement. This is an engineering role for an experienced electrical engineer with extensive clean water or wastewater background. You'll be responsible for the full spectrum of electrical engineering delivery - from power system design and HV protection studies through to equipment specification, supplier management and site support. You'll manage project schedules and budgets, and ensure technical excellence across complex water infrastructure projects. What You'll Be Doing Project Delivery • Assume responsibility for electrical scope delivery across assigned water projects, • Delegate work packages and manage schedules and budgets, • Prepare and manage schedules, MDRs and change control processes, • Lead technical meetings and manage project reporting to senior stakeholders, • Support project estimates including Cost to Rectify assessments Electrical Design & Technical Delivery • Provide electrical discipline technical input across the full project lifecycle, • Prepare, check and approve engineering documentation including:, • Basis of Design and Power System Calculations, • Earthing and Lightning Calculations, • Equipment sizing calculations and specifications, • Single Line Diagrams (SLDs), cable schedules, material take-offs, • Block Control Diagrams (BCDs), schematics, equipment and cable routing layouts, • Prepare installation scopes of work for electrical teams, • Conduct HV Power System Modelling and Protection Studies, • Manage electrical equipment ageing and obsolescence across projects Equipment & Procurement Management • Prepare equipment and materials requisitions for HV and LV switchboards, transformers, motors, UPS systems, power factor correction, trace-heating, lighting and associated electrical equipment, • Review supplier quotations and prepare technical bid assessments, • Liaise with DNO and other stakeholders on system requirements and constraints, • Ensure all equipment meets relevant standards including ATEX, PED, Low Voltage Directive, Machinery Directive and EMC requirements Compliance & Standards • Ensure compliance with all applicable national and international codes of practice, legislation and company/client standards, • Maintain awareness of risk identification, quantification and HSE requirements, • Support CE marking compliance and regulatory requirements for electrical equipment and plant, • Contribute to continuous improvement in electrical design processes and practices Stakeholder & Site Support • Represent electrical engineering with clients, suppliers and project teams, • Support site teams with operational and technical issues, • Manage relationships with key stakeholders including DNO, clients and regulatory bodies, • Ensure customer focus and service excellence across all interactions About You Essential Qualifications & Experience • Degree in relevant engineering discipline Apprenticeships considered if supported by equivalent professional standing, • Chartered or Incorporated Engineer status with a relevant professional body, or clear evidence of working towards these titles, • Minimum 15+ years' engineering experience in water sector (clean water or wastewater) or similar infrastructure environments, • Extensive knowledge of clean water and wastewater infrastructure design and delivery, • Expert-level understanding of:, • Power system design and analysis, • HV Power System Modelling and Protection Studies, • Electrical equipment specification and sizing, • Earthing, lightning and grounding design, • UK legislation and standards for electrical installations, • ATEX, PED, Low Voltage Directive, Machinery Directive and EMC compliance requirements, • Team leadership experience — proven ability to manage and develop electrical engineering teams to deliver on schedule and budget, • Project management capability — experienced managing schedules, budgets, change control and stakeholder reporting, • Strong communication skills — confident engaging with colleagues, clients and stakeholders at all levels, • Safety and risk management focused — work with safety and HSE requirements at the forefront, • Customer focused — commitment to delivering to client requirements and expectations, • Highly motivated and self-directed — takes ownership of technical and leadership responsibilities Desirable • Experience on large, complex water infrastructure projects, • Track record of delivering HV Power System Modelling and Protection Studies, • Experience managing DNO liaison and system connection requirements, • Knowledge of water treatment processes and associated electrical requirements, • Experience with electrical equipment ageing and obsolescence management, • BIM or integrated design management experience, • History of mentoring and developing junior electrical engineers

Senior EICA Engineer - Water Water Sector | Remote with visits to project site as required | Long-term Contract | Outside IR35 | Competitive Rate The Opportunity We're recruiting a Senior Electrical, Instrumentation, Control & Automation (EICA) Engineer to deliver design and technical expertise across multiple UK water sector frameworks. You'll produce outline and detailed EICA designs, manage technical documentation, conduct site surveys, and support commissioning activities on water infrastructure projects. Contract Details: Outside IR35 | Competitive rate | Remote working (With UK site visits as required) | Long-term contract This role is for an experienced water treatment engineer with extensive UK water project background. You'll be responsible for producing cost-effective, compliant EICA designs that can be effectively purchased, installed and commissioned. You'll conduct surveys, review supplier quotations, prepare technical assessments and ensure all designs meet specification and regulatory requirements. What You'll Be Doing EICA Design & Technical Delivery • Produce outline and detailed electrical, instrumentation and control designs for water treatment projects, • Develop cost-effective designs that meet specification requirements and can be effectively installed and commissioned, • Prepare technical bid assessments and review supplier quotations for EICA equipment, • Ensure all designs comply with relevant specifications, UK legislation and standards, • Prepare equipment and materials requisitions for EICA systems and equipment, • Prepare installation scopes of work for construction and commissioning teams Technical Assurance & Documentation • Prepare, check and approve engineering documentation in accordance with company procedures, • Review sub-contractor designs to ensure compliance with specification requirements, • Ensure all work meets applicable national and international codes of practice, • Support compliance with ATEX, PED, Low Voltage Directive, Machinery Directive and EMC requirements, • Maintain accurate technical documentation and design records Site & Commissioning Activities • Conduct site surveys to inform design decisions and validate design assumptions, • Attend Factory Acceptance Tests (FATs) at supplier premises and produce test reports, • Provide construction and commissioning support on-site as required, • Review and validate designs during site implementation, • Support resolution of technical issues during commissioning Compliance & Standards • Ensure knowledge of UK water treatment industry standards including WIMES, • Maintain awareness of risk identification, quantification and management, • Ensure HSE requirements are met across all design and technical work, • Support installation of equipment in potentially explosive areas where relevant About You Essential Qualifications & Experience • Degree in relevant engineering discipline (Electrical, Electronic or Control Engineering) - Apprenticeships considered if supported by equivalent professional standing, • MUST HAVE: Significant experience on UK water treatment projects, • Minimum 10+ years' engineering experience in water sector or similar infrastructure environments, • In-depth knowledge of:, • Water treatment facility design and delivery, • UK water industry standards and practices (including WIMES), • Electrical, instrumentation and control systems for water treatment, • ATEX, PED, Low Voltage Directive, Machinery Directive and EMC compliance requirements, • Strong understanding of:, • Design working practices and installation requirements for water treatment, • UK legislation and standards relevant to water utilities, • Equipment specification, sizing and selection, • Cost-effective design approaches, • Awareness of risk identification, quantification and management and HSE requirements, • Strong communication skills - confident engaging with colleagues, clients and stakeholders, • Safety and risk management focused -work with safety and risk at the forefront, • Customer focused -commitment to meeting specification requirements and client expectations, • Highly motivated -takes ownership of design delivery and technical excellence Desirable • Experience in water treatment processes -understanding of treatment plant operations and requirements, • Familiarity with process automation and control systems, • Track record of site surveys and Factory Acceptance Testing, • Experience on large, complex water infrastructure projects, • Knowledge of renewable energy or sustainability systems in water treatment, • BIM or integrated design management experience The Role in Practice You'll report to the project lead engineer and work on water sector frameworks. This is hands-on technical work on water treatment projects. You'll be producing EICA designs, conducting surveys, reviewing equipment quotations and supporting commissioning activities. You'll be the technical authority on EICA matters for your assigned projects, with responsibility for design quality, compliance and effective implementation. Your expertise in water treatment and EICA systems directly impacts how projects are delivered.

Service & Small Works Engineer Location Manchester Salary or rate £45k + Van, Paid Travel & 10% Bonus! Contract type Permanent About the role An excellent opportunity has become available for a skilled and motivated Service & Small Works Engineer to join a growing fire protection business operating across Manchester and surrounding areas. This Service & Small Works Engineer position is ideal for an experienced fire alarm engineer looking for a long term role offering stability, career progression, paid travel, and strong earning potential. The successful Service & Small Works Engineer will be responsible for the servicing, maintenance, fault finding, repair, and small works installation of fire protection systems across a variety of commercial and industrial sites. This Service & Small Works Engineer role requires strong technical knowledge of fire alarm systems and associated life safety equipment, alongside the ability to work independently and maintain excellent customer relationships. As a Service & Small Works Engineer, you will be involved throughout the full lifecycle of each service visit and small works project, from initial attendance and fault diagnosis through to commissioning, documentation, and client handover. The Service & Small Works Engineer will work closely with internal technical, sales, and project teams to ensure all works are completed safely, efficiently, and in compliance with current industry regulations and standards. This role would suit a proactive Service & Small Works Engineer with experience working on fire alarm systems, strong organisational skills, and a professional approach to customer service. Key responsibilities • Carry out planned service visits in line with the service schedule and report issues promptly to management, • Service, maintain, test, diagnose faults, and repair fire protection systems in accordance with BS5839, BS5306, and other relevant standards, • Complete commissioning activities and support effective client handover processes, • Undertake small works installations safely and professionally across client sites, • Maintain accurate service records, worksheets, witness documentation, and photographic evidence, • Support design queries, calculations, and technical documentation where required, • Assist with build budgets, procurement planning, and resource allocation for small works projects, • Supervise subcontract labour during service and small works activities when necessary, • Ensure all works are completed in line with health and safety legislation and company procedures, • Monitor and manage cost control for works under your responsibility, • Support invoicing and applications for payment relating to completed service works, • Work closely with sales, technical, and design teams to support project continuity, • Maintain strong working relationships with clients, contractors, and site teams, • Represent the business professionally at all times, • Support continuous improvement through awareness of market developments and industry best practice Skills and experience required Essential • Proven experience as a Service & Small Works Engineer or Fire Alarm Engineer, • Strong understanding of fire protection systems, servicing, maintenance, and fault finding, • Knowledge of current fire safety legislation and industry standards, • FIA, IFEDA, or equivalent fire safety certification, • Experience preparing risk assessments and method statements, • Strong communication and customer service skills, • Ability to interpret technical drawings and service documentation, • Good organisational and problem solving skills, • Competent using Microsoft Word and Excel for reporting and administration, • Full UK driving licence Desirable • CSCS card, • PASMA certification, • IPAF qualification, • Experience supervising subcontractors or junior engineers, • Experience supporting estimates or small works quotations What is on offer • Competitive salary of £45k, • Company van provided, • Paid travel time, • 10% bonus scheme, • Overtime opportunities and call out allowance, • Company pension scheme, • 28 days annual leave including bank holidays, • Additional annual leave based on length of service, • Ongoing training and professional development, • FIA and manufacturer training provided, • Career progression opportunities within a growing business, • Company mobile phone and laptop or tablet, • Specialist tools, PPE, and uniform provided, • Employee wellbeing support programmes, • Expenses covered for work related travel where applicable, • Supportive and professional working environment, • Long term stable employment within an established fire protection company How to apply If you are an experienced Service & Small Works Engineer looking for your next permanent opportunity in Manchester, we would like to hear from you. If this role is for you, please apply with your CV ASAP! FIREENG

Senior Mechanical Design Engineer – Airframe Structures – 6 Month Contract Outside IR35 Senior Mechanical Design Engineer – Airframe Structure Contract | Outside IR35 | Remote Rate: £DOE Duration: Initial 6 months (rolling) Start: Immediate Location: UK-based (company HQ in Buckinghamshire) You will need to be flexible with onsite attendance for design reviews and key project activities. This may involve being onsite 1–2 days per week during certain project phases. While the requirement will be irregular, when onsite support is needed, attendance at site will be expected. • Must Have: CATIA V6 / 3DEXPERIENCE Platform, • Must Have: Airframe Design background An advanced aerospace engineering programme is seeking a Senior Mechanical Design Engineer with strong airframe structures experience to support the development of next-generation aircraft systems. This opportunity will suit an experienced engineer who thrives within fast-paced R&D and prototype environments and can take ownership of structural design activities from concept through to manufacture and validation. Overview You will be responsible for the design and development of primary and secondary airframe structures, supporting integration, lightweight structural design and engineering release activities across the programme. Working closely with stress, manufacturing and systems engineering teams, you will deliver robust and manufacturable structural solutions suitable for advanced aerospace applications. Key Responsibilities • Design and development of airframe structural components and assemblies, • Creation of 3D CAD models and detailed engineering drawings using CATIA 3DX, • Support structural integration, packaging and installation activities, • Work closely with stress, systems and manufacturing engineering teams, • Support prototype build, testing and validation activities, • Participate in technical reviews and design problem-solving, • Support configuration control and engineering release processes, • Ensure designs comply with aerospace engineering standards and best practice Experience Required • Proven aerospace mechanical design experience within airframe structures, • Strong background designing primary and secondary structures, • High level proficiency with CATIA 3DX is essential, • Experience working within aerospace, aviation, UAV or eVTOL sectors, • Good understanding of metallic and composite structures, • Strong knowledge of manufacturing and assembly processes, • Experience supporting prototype or low-volume development programmes, • Ability to work autonomously within a multi-disciplinary engineering environment Desirable Experience • eVTOL, UAV or advanced air mobility programme experience, • Exposure to structural analysis / FEA environments, • Knowledge of aerospace certification requirements, • Experience within highly regulated engineering environments Additional Information • Outside IR35 contract, • Hybrid working available, • Immediate start preferred, • Initial 6-month contract with strong extension potential, • Competitive day rate depending on experience If this is of interest please apply on LinkedIn or email george.taylor@everec.co.uk

Lead Electrical Engineer Nuclear Sector | Manchester-based | Hybrid | Long-term Contract | Outside IR35 | Competitive Rate | SC Clearance Required or ability to obtain The Opportunity An exciting opportunity has arisen for a Lead Electrical Engineer for a FEED on a Nuclear project. This is a purely electrical role with full responsibility for electrical scope delivery, reporting to the Electrical Engineering Manager. MUST HAVE: Recent electrical engineering experience in the nuclear sector. You'll assume overall responsibility for the electrical scope across this FEED project, managing schedules, technical delivery, equipment procurement, and a team of electrical engineers. This is genuine technical leadership on a strategically important nuclear infrastructure programme. What You'll Be Doing Electrical Scope Leadership • Assume overall responsibility for delivery of electrical scope, • Create and manage schedules, Material Design Records (MDRs) and change control processes, • Lead project reporting and stakeholder meetings, • Delegate work packages to the electrical team, • Support project estimates including Cost to Rectify (CTR) assessments Electrical Design & Technical Delivery • Provide electrical discipline technical input across the full project lifecycle, • Prepare, check and approve engineering documentation including:, • Basis of Design and Power System Calculations, • Earthing and Lightning Calculations, • Equipment sizing calculations and Load Schedules, • Equipment Specifications and Datasheets, • Single Line Diagrams (SLDs), Cable Schedules, Material Take Offs, • Block Control Diagrams (BCDs), Schematics, Equipment and Cable Routing Layouts, • Conduct HV Power System Modelling and Protection Studies, • Manage electrical equipment ageing and obsolescence across the project Equipment & Procurement Management • Prepare equipment and materials requisitions for HV and LV switchboards, transformers, motors, UPS systems, power factor correction, trace-heating, lighting and associated electrical equipment, • Review supplier quotations and prepare technical bid assessments, • Liaise with DNO and other stakeholders on system requirements, • Ensure all equipment meets ATEX, PED, Low Voltage Directive, Machinery Directive and EMC compliance requirements Installation & Commissioning • Prepare installation scopes of work for construction and commissioning teams, • Support site teams with operational and technical issues, • Ensure designs are installable and maintainable, • Support site construction and commissioning activities Compliance & Standards • Ensure compliance with all applicable national and international codes of practice, • Maintain compliance with UK legislation and standards, • Ensure knowledge of equipment installation in potentially explosive areas, • Support CE marking requirements and regulatory compliance About You Essential Qualifications & Experience • MUST HAVE: Recent electrical engineering experience in the nuclear sector - demonstrated track record on nuclear or similar regulated infrastructure projects, • Degree in relevant engineering discipline (Electrical, Electronic or Control Engineering) - Apprenticeships considered if supported by equivalent professional standing, • Chartered or Incorporated Engineer status with a relevant professional body, or clear evidence of working towards these professional titles, • Minimum 15+ years' electrical engineering experience in nuclear sector or similar infrastructure environments, • Expert-level knowledge of:, • Electrical design working practices and installation requirements, • HV and LV power systems design and protection, • Equipment specification, sizing and selection, • Earthing, lightning and grounding design, • UK legislation and standards for electrical installations, • ATEX, PED, Low Voltage Directive, Machinery Directive and EMC compliance requirements, • Strong understanding of:, • Design for construction and commissioning, • Commercial and contractual matters, • DNO liaison and system connection requirements, • Risk identification, quantification and management, • HSE requirements for electrical systems, • Team leadership experience - proven ability to manage electrical engineering teams and deliver to schedule and budget, • Excellent communication skills - confident engaging with colleagues, clients and stakeholders at all levels, • Safety and risk management focused - work with safety and HSQE at the forefront of all activities, • Customer focused - commitment to meeting client specifications and expectations, • Highly motivated - takes ownership of technical and leadership responsibilities Desirable • Experience on other uranium enrichment or similar fuel cycle projects, • Track record of leading electrical teams on major FEED or EPC projects, • Experience with HV Power System Modelling and Protection Studies, • Familiarity with DNO liaison and complex grid connection requirements, • Knowledge of electrical systems in potentially explosive areas (ATEX Directive), • Experience on other critical national infrastructure projects, • Mentoring and developing junior electrical engineers Security Clearance You must be able to obtain SC (Security Clearance) to work on this nuclear project. BPSS is the minimum starting point. The Role in Practice You'll be based in Manchester with hybrid flexibility (2-3 days office, remaining days remote). You'll report to the Electrical Engineering Manager, leading the electrical engineering team. This is hands-on technical leadership on a strategically important FEED project. You'll be producing electrical designs, managing supplier relationships, leading a technical team, and ensuring the electrical scope is delivered on schedule, to budget, and in compliance with nuclear standards. Your expertise in nuclear electrical systems and your ability to lead teams directly impact project success and programme delivery. Why This Role You'll be working on a major Nuclear FEED - a strategically important UK nuclear fuel cycle project. This is professional electrical engineering at the highest level, where your expertise in nuclear systems and technical leadership genuinely matters. You'll be working with experienced project teams on a complex, regulated programme where electrical design excellence and safety rigour are paramount.

Disclaimer: To be eligible, you’ll need to be based in the UK, France, Germany, Italy, or Luxembourg. The role will also involve regular travel across our sites in EMEA. Who We Are: At CloudHQ, our mission is to deliver flexible, efficient, and resilient data center solutions to businesses worldwide. Founded by a pioneer in data center REITs, we are a rapidly growing organization with state-of-the-art data center sites globally, with locations in Ashburn, London, Frankfurt, Paris, Milan, Osaka, São Paulo, and more. As we embark on an exciting phase of global growth, we are building a diverse and talented team to drive our success and help shape the future of mission-critical infrastructure at CloudHQ. Role Overview: The Principal Electrical Engineer, Development will lead the design, planning, and execution of highly efficient and scalable electrical systems for developer-led data center projects. This critical role focuses on providing technical leadership and oversight across the entire development lifecycle, including concept design, detailed engineering, installation, and commissioning phases. The successful candidate will act as the trusted expert for high-voltage electrical systems, power distribution configurations, redundancy solutions, and operational optimization within hyperscale environments. This role requires advanced technical proficiency, project leadership experience, and the ability to collaborate across multidisciplinary teams to deliver resilient, energy-efficient data center infrastructure for global cloud service providers. Key Responsibilities: • Technical Leadership in Electrical Systems Design, • Serve as the technical authority guiding the development and implementation of electrical systems, including:, • High-voltage power systems, • UPS systems (Uninterruptible Power Supply), • Switchgear configurations and redundancy solutions, • Transformers, busbars, and power distribution panels, • Emergency backup generators, • Lead the development of electrical specifications, ensuring all systems meet CloudHQ’s standards for reliability, scalability, and energy efficiency., • Conduct and review advanced calculations on load distribution, fault currents, and energy usage to optimize designs for hyperscale environments., • Support value engineering efforts to deliver cost-effective technical solutions without compromising on performance or redundancy. Development Lifecycle Oversight: • Manage electrical infrastructure across early-stage design, and procurement phases of data center projects., • Provide guidance to Pre-Development and Development teams to integrate electrical systems into early-stage master planning, feasibility studies, and land acquisition specifications., • Review and evaluate contractor and vendor proposals to ensure compliance with project-specific electrical design requirements., • Supervise the installation and commissioning of critical power components, performing detailed system validation and load testing throughout the facility’s commissioning process. System Integration & Stakeholder Collaboration: • Collaborate with internal and external engineering teams to ensure seamless integration of electrical systems with mechanical, ICT, and tenant-specific systems., • Lead design team meetings, presenting actionable insights and guiding technical decisions around electrical scopes., • Partner with tenant teams to customize power infrastructure, meeting their specific needs for redundancy, scalability, and operational flexibility. Compliance & Sustainability Standards • Ensure designs adhere to European building codes, ISO safety directives, and ASHRAE energy efficiency standards., • Monitor and implement standards for energy optimization and carbon reduction in electrical systems, achieving low PUE targets across data center projects., • Manage regulatory compliance for electrical permitting processes while aligning all designs with safety protocols and environmental sustainability goals. Commissioning Oversight & Technical Validation • Oversee factory witness testing for critical electrical equipment, ensuring functionality and compliance before delivery to the site., • Supervise electrical system commissioning, including system validation under peak load conditions to verify operational stability and reliability., • Collaborate closely with commissioning agents to ensure seamless system handover to operations teams. Innovation & Continuous Improvement • Research emerging technologies such as AI-driven power optimization systems, microgrid integration, and smart energy monitoring, incorporating these innovations into new projects., • Identify opportunities for improving electrical redundancy strategies and fault tolerance capabilities to ensure uptime in mission-critical environments., • Implement IoT-based infrastructure to enable real-time performance monitoring and predictive maintenance for electrical systems. Requirements: • Advanced Knowledge Of Electrical Systems For Mission-critical Facilities, Including High-density Power Distribution, Backup Power Integration, And Fault Tolerance Strategies., • Proficiency In Electrical Load Calculations, Short-circuit Analysis, And Power Path Optimization For Hyperscale Environment's, • Familiarity With Electrical Equipment Such As: UPS configurations, High-voltage transformers, Switchgear systems and breakers, Emergency generators and fuel systems, Busway systems for large-scale distribution panels, • Expertise in electrical design and analysis tools, including: AutoCAD Revit ETAP for power system modeling., • Other BIM platforms for integrated design coordination., • Thorough knowledge of European electrical standards, such as IEC, DIN, ISO, and ASHRAE TC9.9 for mission-critical facilities', • Strong understanding of environmental regulations related to electrical system design for energy-efficient operations., • Proven ability to manage multiple data center projects simultaneously while maintaining strict timelines and budget's, • Skilled in developing technical reports, progress documentation, and compliance certifications for audits and regulatory submissions., • Ability to guide multidisciplinary teams and influence technical decisions during complex project milestones., • Willingness to travel across Europe for on-site inspections, commissioning oversight, and stakeholder meetings, with travel requirements up to 50%. Preferred Qualifications: • Bachelor’s or Master’s Degree in Electrical Engineering, Power Systems, or related technical fields., • Professional certifications such as PMP, LEED AP, CEng, or equivalents are highly desirable., • Minimum 10+ years’ experience in designing and delivering electrical systems for developer-led data center or mission-critical projects., • Proficiency in English; fluency in German, French, or other European languages preferred for regional collaboration. At CloudHQ, we deliver cutting-edge data centers that power the modern digital economy. As a Principal Electrical Engineer, Development, you’ll lead the creation of resilient electrical systems for hyperscale environments, collaborating with global experts to build highly efficient infrastructure solutions. Join our growing team and help shape the future of mission-critical technology development in Europe. Visit our LinkedIn page or contact recruiting@cloudhq.com for more information.

Offshore Methods (Removal) Lead / Senior Project Engineer – Full Platform Decommissioning • Contract Type: Outside IR35, • Duration: 12 months (scope running for another 18 months approx.), • Rate: Competitive hourly rate + uplift for offshore, • Location: Ideally 28/28 Offshore Travel / Home Working, • Start: ASAP Ceto Talent is representing a global offshore EPCI construction contractor on a major decommissioning project. We are supporting a well-established global offshore EPCI construction contractor, delivering complex offshore installation and decommissioning projects across the energy sector. This role sits within a major offshore decommissioning programme, focused on platform removal and heavy lift activities. You will play a key role in both methodology development and offshore execution, supporting ongoing works and upcoming project phases. Purpose of the position As Offshore Methods (Removal) Lead / Senior Project Engineer, you will report to the Offshore Methods Manager and be part of a major North Sea Decommissioning Project. You will ensure that all Methods engineering activities are properly and correctly managed, either directly or through subordinate staff, during the decommissioning phase. You will coordinate the activities of the method engineering group assigned, managing tasks and workload while providing both technical and administrative guidance. How can you support us? • Organise and coordinate the activities of the method engineering group, ensuring objectives are effectively and economically achieved, • Administer the working programme in line with plans, design and specifications, • Be responsible for the interpretation, implementation and improvement of design solutions, • Monitor and coordinate all phases of work progress, reviewing procedures, reports and calculations from engineers, • Ensure deliverables, equipment, facilities and services meet specified requirements, • Coordinate with vessel-based technical teams, supporting installation and advising vessel management on technical matters, • Ensure all installation records and checklists are completed and issued to QC for compilation, • Organise and participate in design reviews to define optimal installation methodologies, • Attend site during onshore preparation to ensure readiness and compliance, • Support critical offshore operations, ensuring execution aligns with methodology and capturing lessons learned, • Participate in offshore campaigns as a field engineer when required What are we looking for? • Degree qualified in Engineering (structural, naval or mechanical preferred), • Proven experience as a Methods Engineer / Senior Project Engineer within offshore removal or decommissioning, • Strong background in oil & gas offshore projects or similar high-risk environments, • Experience supporting cutting activities and heavy lifting operations, • Ability to operate across both engineering and offshore execution phases, • Valid OEUK medical and offshore certification (e.g. BOSIET/FOET) Project / Technical Environment • Offshore platform removal and decommissioning scope, • Heavy lift vessel operations for an offshore contractor and similar assets, • Cutting and removal methodology development, • Onshore engineering with offshore campaign delivery If you’re a Senior Project Engineer / Offshore Methods Lead with strong structural decommissioning and offshore execution experience, this is a key opportunity to get involved in a high-profile UK project. For more information or to apply, contact Jasmine White at Ceto Talent - 02039 66 66 52 | jasmine@cetotalent.com

Position: Refrigeration Design Engineer (Industrial Refrigeration) Contract: Permanent, Full Time Location: Remote - Based anywhere in the UK (Head office is based in Leicestershire) Salary: up to £75K plus company car or cash allowance & benefits & performance bonus Industry: Industrial Cooling & Refrigeration – Food/FMCG, Cold Storage & Logistics, Data Centre PRS Engineering has engaged with a key client and a leading Industrial Cooling & Refrigeration specialist operating and delivering high value projects across the UK with headquarters based in Leicestershire. Due to team expansion and winning new projects, we are seeking an Industrial Design Engineer with a background in Ammonia, CO2 Systems, Industrial Cooling Technologies &/or Industrial Refrigeration to support business requirements and oversee key projects. This is a remote working role with occasional attendance at the Leicester office will be required as will site visits and site surveys. The Role: To design and propose industrial refrigeration systems for food manufacturing facilities and logistics cold storage centres. Detailing costs and designs to customers while meeting legislative and customer-specific requirements. To create comprehensive designs from initial briefs and/or drawings, whilst adhering to the latest company and industry standards. Produce detailed design work, consisting of but not limited to: cold room and facility heat load calculations, equipment selections, pumped circulation system design, P&ID development and approvals, concept design presentations, sales stage design applications, engineering specification sheets, pipework isometric drawings, and pipe sizing for ammonia refrigeration systems. This is a remote working role, but attendance at the Leicester office will be required as will site visits, surveys, and client presentations. Main Responsibilities • Carry out site surveys where required, • Generate and update enquiry bank, • Attend customer scoping and design meetings where required, • Produce initial outline design/scope, • Produce Design File (electronic or hard copy) in line with ISO 9001 standard, • Produce detailed design post sales stage and convert into live project for delivery team, • Conduct heat load calculations, produce engineering sheets and pipework isometric, • drawings, equipment selections and pipe work sizing, • Produce supplier/sub-contractor enquiries for quotations, • Produce data for Design of Contracts project handover including: Equipment/supplier/sub-contractor procurement schedule, identify PED category of system and inform compliance team if CAT 4, calculate system refrigerant charge, produce high level program of works and high level phasing with support of delivery team, • Raise Contract Approval Form to enable project to be booked on system, • Mark up drawings and issue to CAD department to produce, • Attend site at least once during project installation period, to carry out design review, • Assist PM during delivery phase for design queries, • Maintain excellent service levels at all times, ensuring a “first Class” service to all customers, • Take on projects as and when required and see them through to successful completion Financial • Produce estimates in line with customer budgets and to agreed company margins, • Produce formal scope of works and formal quotations, • Assist CM with project variation design and costs All contracts over £500k to have contract/design review with senior member of staff, • To identify means of generating extra revenue through new initiatives (forward thinking) People • One to one session with line manager once a quarter, • To treat other colleagues, managers, customers and other stakeholders equally and with courtesy and respect at all times, • Where possible - to assist others with tasks that may be outside of the scope of your role, • To assist with coaching other colleagues/managers, for cross training purposed in your area of expertise Compliance • Ensure that all relevant company and legislative policies and best practices are adhered to and always maintained, • Inform the relevant Manager of non-conformances and ensure that corrective action is taken, • Ensure compliance with all procedures throughout within your remit, • Produce Design File (electronic or hard copy) in line with ISO 9001 standard, • To ensure Refrigeration industry codes and standards are upheld, • To comply with environmental policies and putting forward new ideas for, • improving environmental efficiencies., • Adhere to Group H&S procedures with due regard for business constraints and efficiency

About the Company Scotmas Group is headquartered in Kelso in the Scottish Borders. We are a world leader in hygiene protection and water treatment, we develop and manufacture products that protect against insect and water-borne diseases that can be encountered around the world. We are currently going through an expansion growth within the business and this is an exciting time to join a forward thinking local company, that has also just attained the certified B Corporation standard. Working with the Local Community This achievement is a boost for Scotmas and the wider Scottish Borders community. As a business rooted in the region, Scotmas is deeply committed to creating high-quality jobs, apprenticeships, and meaningful career opportunities that contribute to the local economy. The B Corp certification reinforces Scotmas' dedication to supporting the community by fostering local talent, partnering with nearby businesses, and backing charitable initiatives that make a real difference. By aligning growth with the needs of the Scottish Borders, the company aims to create a positive ripple effect that benefits everyone in the region. Our Mission in Action: Tackling critical issues like water scarcity, marine pollution, and disease control with practical, impactful solutions. Commitment to People and Planet: Staying true to our promise to prioritize sustainability and community impact alongside financial success. Leadership and Trust: Showing our customers, partners, and team that Scotmas is serious about doing business the right way. About the Role We are seeking a dedicated and skilled Field Service Engineer Level 2 to join our dynamic team. In this role, you will be responsible for providing exceptional technical support and service to our clients in the field. You will play a crucial part in ensuring the optimal performance of our equipment and systems, addressing any issues that arise, and delivering solutions that meet our customers' needs. This position requires a proactive approach, strong problem-solving abilities, and excellent communication skills. Working a 4 day week and a weekend call out rota (1 in 4). The person can be based anywhere between Manchester and Carlisle as we cover most of the UK Responsibilities • Conduct on-site, installation, maintenance, and repairs of equipment and systems., • Troubleshoot technical issues and provide effective solutions in a timely manner., • Collaborate with clients to understand their needs and deliver tailored service., • Maintain accurate records of service activities, including reports on repairs and maintenance performed., • Provide training to clients on the proper use and maintenance of equipment., • Ensure compliance with health and safety regulations while performing duties., • Stay updated on industry trends and advancements to enhance service delivery., • Chemical handling, COSHH understanding. Qualifications • N/SVQ or equivalent experience in plumbing/heating operations. Required Skills • Proven experience as a Field Service Engineer or Plumber role is preferred., • Strong technical background with knowledge of mechanical, electrical, or electronic systems in the water treatment sector is desirable., • Excellent problem-solving skills with the ability to think critically under pressure., • Strong interpersonal skills with the ability to communicate effectively with clients and team members., • A valid driving licence is essential for travel to client sites., • Flexibility to work irregular hours as needed to meet client demands., • Self-motivated with strong ethical and working principles. Preferred Skills • Experience in the water treatment sector. Pay range and compensation package Competitive salary, Group Personal Pension, Private Health Insurance after 3 years of service, Death in service cover, Income protection cover, Employee Assistance Programme (EAP), Bike to work scheme, Electric car scheme, Work vehicle for travel to customers. Equal Opportunity Statement Scotmas Group is committed to diversity and inclusion. We welcome applicants from all backgrounds and are dedicated to creating an inclusive environment for all employees. Apply If you are interested in the position and would like to know more or apply to be part of this forward thinking organisation, please send us a copy of your updated CV along with a cover letter highlighting your skills and experience that make you the ideal candidate for the role. You can send your application to careers@scotmas.com.

Better places, thriving communities. Role Purpose The Senior HV/EHV Cable Design Engineer will act as the company's technical authority for high‑voltage and extra‑high‑voltage underground cable systems up to 400 kV AC within the UK. This role provides expert leadership across all stages of cable system design - from feasibility and concept design through detailed engineering, installation support, commissioning input, and lifecycle performance assessment. The postholder will set engineering standards, ensure compliance with UK transmission and distribution requirements, and support business growth through deep technical capability. Key Responsibilities • Technical Leadership, • Serve as the company's subject matter expert for HV/EHV cable system design up to 400 kV AC., • Develop and maintain engineering standards, design methodologies, and quality assurance processes relating to underground cable systems., • Provide expert oversight on thermal analysis, route engineering, earthing studies, jointing methodologies, system performance, and asset ratings., • Project Delivery, • Lead and/or review concept, FEED, and detailed designs for major onshore cable projects., • Produce and verify cable system design documentation including cable ratings, sheath bonding calculations, trench profiles, fault studies, pulling calculations, and installation methodologies., • Undertake or approve technical risk assessments and mitigation strategies during design stages., • Provide specialist technical support to construction and commissioning teams, including interpretation of test results and resolution of complex issues., • Compliance & Industry Standards, • Ensure designs comply with UK regulatory, utility and industry standards (e.g., NG ESO/NGED/SSEN requirements, IEC, CENELEC, ENA, Cigre guidelines)., • Maintain awareness of changes in relevant legislation, specifications, and good practice, advising the company accordingly., • Provide expert input into CDM design risk registers and safety‑by‑design principles., • Governance & Authorisations, • Act as, or provide technical support to, the Contractor Design Assurance Engineer (CDAE) or Lead Contractor Design Assurance Engineer (LCDAE) role, where applicable., • Guide internal teams on design assurance, technical governance, and project approval processes., • Innovation & Continuous Improvement, • Lead the evaluation and adoption of new cable technologies, materials, and installation techniques., • Contribute to research, development, and internal training programs to uplift the organisation's cable engineering capability., • Stakeholder & Client Engagement, • Represent the company in technical meetings with clients, suppliers, manufacturers, and statutory bodies., • Prepare and deliver high‑quality technical reports, presentations, and design justifications., • Support business development through technical bids, scopes, and client advisory services. Essential Skills & Experience • Extensive demonstrable experience in the design and analysis of HV/EHV cable systems (DC, 11 kV – 400 kV AC) within the UK electrical infrastructure environment., • Demonstrable expertise in cable ratings, thermal modelling, bonding & earthing, system layout, and installation engineering., • Proven track record of delivering complex cable projects for Transmission Operators (TOs), Distribution Network Operators (DNOs), ICPs or major EPC contractors., • In‑depth understanding of IEC 60287, IEC 60840, IEC 62067, CENELEC standards, ENA TS documents, and TO‑specific specifications., • Experience performing or holding the CDAE or LCDAE role for HV/EHV cabling (highly advantageous)., • Strong communication skills with the ability to influence technical decisions at senior levels., • Degree in Electrical Engineering or related discipline; Chartered Engineer status preferred., • Personal Attributes, • Highly analytical with strong problem‑solving capability., • Detail‑orientated with a structured approach to engineering assurance., • Collaborative, supportive, and capable of mentoring junior engineers., • Confident representing the company as a technical authority. Our market-leading offering provides you with benefits that suit your lifestyle. We have a virtual GP on hand for you and members of your household. So you can get expert advice by video or phone without having to leave your home. We offer financial wellbeing assistance through our Salary Finance scheme. For example, you could access 50% of your earned pay before payday for a small fee. Salary Finance also offers competitive loans. When you join us, we’ll give you a link to our flexible lifestyle benefits platform, Choices. You might choose to purchase up to five extra days’ holiday each year. You might buy critical illness insurance, seek dental treatment or buy technology products at an affordable cost. There are many choices! We give you access to high street discounts from thousands of well-known retailers, gyms and more through our MiDeals platform. And we have a cycle-to-work scheme. Life cover of up to four times your salary is available. We also offer enhanced pension contributions, a save-as-you-earn scheme, and a Mitie Matching Share Plan (you could even be awarded free shares in Mitie). We award our employees with Mitie Stars as recognition for their hard work. There are cash prizes up for grabs each month and at the end of the year there’s a chance to scoop a top prize of £10,000! Our success is a direct result of the experience and quality of our people. Progressing your career is therefore a top priority for us. We offer a diverse variety of training and development avenues via a wide selection of learning resources to suit you. Since 1987, Mitie’s 80,000 employees have been maintaining companies globally. We are the UK’s leading facilities management and professional services company, and our clients range from household names in banking, critical government sites as well as hospitals and schools. Join our Mitie Team. Together our diversity makes us stronger.

adi Fire and Security – Fire Systems Small Works Engineer About the Role adi Fire & Security is looking for an experienced Fire Systems Small Works Engineer to join our growing Fire & Life Safety team. This is a hands-on role focused on commissioning, servicing and small works installations across a variety of environments, including heavy industrial, manufacturing and transport sites. You’ll be responsible for the installation, commissioning, servicing and maintenance of fire and life safety systems, working in line with BAFE regulations, company procedures and customer requirements. Specifically, your key responsibilities will include: • Carrying out small works installations of fire alarm and life safety systems, • Installing and commissioning PAVA and Disabled Refuge systems, • Completing planned preventative maintenance and reactive service calls, • Undertaking small-scale commissioning activities and compliance testing, • Producing completion and commissioning documentation to BAFE standards, • Working safely in line with RAMS, H&S policies and customer site rules, • Liaising professionally with customers on site and resolving issues effectively, • Supporting project delivery by meeting KPIs, timelines and quality standards, • Working alongside subcontractors and direct labour when required, • Participating in an on-call rota on agreed dates About you We would like to hear from you if you have: • Proven experience as a Fire Systems Engineer, • Strong background in fire alarm, aspirating, PAVA and Disabled Refuge systems, • Experience on medium-to-large projects within the fire and security industry, • Experience with systems such as Siemens, Gent, Notifier or EMS would be beneficial, • ECS, IPAF, CCNSG, SSTS, SMSTS, IOSH or similar H&S qualifications (beneficial), • Experience working on industrial or hazardous sites The Benefits • The adi Pit Stop – savings and discounts portal with Reward Gateway, • Healthcare cash plan, • 24/7 GP helpline including private electronic prescription service, • Enhanced Employee assistance programme, • Cycle to work scheme, • Employee referral bonus of £500 for every successful new employee, • Generous holiday allowance, • Celebration days, • Company-wide Christmas party for employees and partners, • Annual employee awards, • Long service awards, • Free workwear The company Find out more about adi - _ Other organisations may call this role a Fire Systems Engineer, Fire Alarm Systems Engineer, Fire Safety Systems Engineer, Fire Systems Installation Engineer or Fire Systems Commissioning Engineer. adi Group is fully committed to the principle of equal opportunity in employment and seeks to ensure that the careers of all employees are determined solely on merit and opportunity and that judgement of employees are free from the effects of bias and prejudice. So, if you’re seeking your next challenge as a Fire Systems Small Works Engineer, please apply via the button shown.

Job Title: Mechanical Site Manager / Project Engineer (Mechanical) Location: Manchester Duration: Project running through to July 2027, with onward work on future projects Role Overview We are recruiting a Mechanical Site Manager / Project Engineer to support the delivery of a major office block development in Manchester. This is a site-based role with responsibility for managing and coordinating mechanical works from installation through to commissioning and handover. The initial appointment will be tied to the current project through to July 2027, with the successful candidate then moving onto subsequent projects within the business. Key Responsibilities • Oversee day-to-day delivery of mechanical works on site, • Manage mechanical subcontractors, labour, and materials, • Review and coordinate mechanical drawings, specifications, and technical submissions, • Support short-term and look-ahead planning, • Ensure quality of installation meets design, specification, and programme requirements, • Monitor progress and report to the Project Manager, • Attend site and coordination meetings, • Manage snagging, testing, commissioning, and handover activities, • Ensure compliance with health & safety standards at all times, • Support completion of O&M manuals and project documentation Requirements • Experience in a Mechanical Site Manager or Mechanical Project Engineer role, • Strong background in mechanical building services on commercial or office projects, • Good understanding of HVAC and mechanical systems, • Ability to interpret drawings and technical information, • Experience managing subcontractors and site teams, • Proactive, organised, and comfortable in a fast-paced site environment, • SMSTS or SSSTS preferred (or willingness to obtain)

Associate Director Electrical Engineering Hourly Rate: £69.58 per hour Inside IR35 via umbrella (40 hours per week) Location: Epsom, London, Peterborough, Cambridge (hybrid 3 days per week) Term: 6 months Our client are a world-class engineering services and nuclear organization. They connect people, data and technology to transform the world's infrastructure and energy systems. They’re committed to leading their clients across our various end markets to engineer a better future for our planet and its people. We are looking for an energetic and experienced Associate or Associate Director Electrical Engineer to join their team within the Design & Advanced Technology (D&AT) Practice. You’ll be part of a talented, multi-disciplinary team delivering cutting edge, iconic projects to our Water market clients. As a key member of our team, you’ll play a vital role in delivering transformational programmes for critical UK infrastructure, with opportunities to work on landmark engineering projects both domestically and internationally. We offer hybrid working which involves 3 days per week being office/site based. Your Role The role will offer a challenging and rewarding opportunity to apply knowledge, experience, and problem-solving skills whilst providing good opportunities for career development. As an Associate Director Electrical Engineer in the D&AT practice, the successful candidate would have the following responsibilities: • Lead a team of Electrical & ICA engineers for delivery of technical design work on complex multi-disciplinary projects following relevant client and project specific design codes and standards, and to high-quality levels., • Responsible for directing and reviewing technical deliverables such as Single Line Diagrams, Cable Block Diagrams, Load Schedules, MCC specifications, Control Philosophies, Control Network Architecture., • Provide technical leadership into project design deliverables for Electrical aspects of complex multi-disciplinary projects and work with the project management team to successfully manage time and budgets to key project milestones and programmes., • Collaborate with client, operational, project, or service activities within your immediate team, • Provide direction and guidance to Senior and Principal colleagues, • Work independently with minimal technical guidance. Exercise personal judgement to solve difficult problems where appropriate and provide guidance to Senior and Principal team members., • Work closely with multi-disciplinary teams in the UK and overseas to deliver integrated design solutions., • Setting quality assurance standards in design and ensure compliance from Electrical & ICA teams., • Leading business development initiatives to drive growth of water market for our client, • Support leadership and management of the D&AT team within the Manchester office. About You The ideal candidate would be a well-rounded and versatile individual who exemplifies the following key skills and attributes: • A degree in Electrical Engineering or equivalent., • Chartered Engineer., • Proven experience in leading or directing an Electrical & ICA engineering design delivery team for a design consultancy including within a multi-disciplinary environment., • Takes broad perspective to identify innovative solutions to design problems., • Requires comprehensive knowledge and practical experience in Electrical designs., • Extensive knowledge of water company design codes and standards as well as industry best practices, such as WIMES., • Strong awareness of HAZOP assessments, lightning strike risk assessments, earthing and bonding, lighting designs, DSEAR and ATEX installation practices., • Ability to work independently with minimal technical guidance., • Experience in water market is preferred but not required., • Experience in industrial and process environment is essential., • Demonstrates strong communication skills, with the ability to convey technical concepts clearly and effectively within diverse multi-disciplinary teams., • A proactive, highly motivated mindset with a collaborative approach to drive teamwork and shared success across projects.

Refrigeration Engineer £45,000 - £55,000 Field based An excellent opportunity has arisen for an experienced Refrigeration Engineer to join a long-established and highly respected industrial refrigeration business supporting customers across the UK food and manufacturing sectors. This role offers long-term stability, strong earning potential, and the opportunity to work on large-scale industrial ammonia refrigeration systems within a supportive, engineer-led environment. The Business The Refrigeration Engineer will be joining a well-established industrial refrigeration specialist with decades of experience in the market. The business is known for its technical depth, long-serving engineering team, and a culture where engineers are properly supported on site. The Role As an Refrigeration Engineer, you’ll be working on heavy industrial ammonia-based refrigeration systems, primarily within food and FMCG production environments. The role covers service, maintenance, breakdowns and installation work, supported by in-house fabrication and coded welding teams. Engineers are paid door to door, operate within a structured standby rota, and benefit from consistent overtime availability. The Industrial Refrigeration Engineer will be required Travel to customer sites across the UK is required. Requirements of Refrigeration Engineer: • Strong background in industrial / heavy commercial refrigeration, • Confident working with ammonia-based refrigeration systems, • Ammonia training and certification, • Experience within food production or FMCG environments, • Strong service, maintenance and fault-finding capability, • Full UK driving licence, • Happy to travel to UK customer sites, • Proactive, reliable engineer with a strong technical mindset Why Join? • Long-serving, highly skilled engineering team with deep technical knowledge, • Supportive, friendly and professional culture, • Modern approach to industrial refrigeration engineering, • Strong earning potential through overtime and standby, • Long-term stability with a respected business Salary & Benefits • Salary: £45,000 – £55,000 (dependent on experience), • 40-hour week, paid door to door, • Overtime: Time & a half and double time, • Plenty of overtime available, • 25 days holiday, • Sick pay: 6 weeks full pay + 6 weeks half pay, • Company pension: After 3 months (4% employer contribution), • Private healthcare, • Death in service: 2 x salary Find out more about our available opportunities or how I can help you further your career – contact me today. Please contact Adele Lewis or click Apply Now. Call: 0151 209 2050 or 07537163611 Email: adele.lewis@aspion.co.uk

Mechanical Design Engineer Location: Manchester Salary: £43,000 – £53,000 (dependent on experience) The Business A well-established machinery manufacturer designing and building bespoke innovative machinery solutions and equipment used by customers worldwide. The business has built a strong reputation for equipment quality, innovation, and customer service. The Role This is a unique opportunity for a Mechanical Design Engineer to take full ownership of mechanical design within the business. The Mechanical Design Engineer will be responsible for the design and development of bespoke machinery and automation systems from concept through to manufacture, testing and installation. The Mechanical Design Engineer will design new machinery from scratch, lead concept development, prototyping and R&D, and take designs through to manufacture. The Mechanical Design Engineer must be proficient in Autodesk Inventor and Vault. They are looking for a Mechanical Design Engineer who is comfortable on the workshop floor and involved with machine builds as they are designing on screen. The is roles involves design machinery, solving engineering challenges and seeing your ideas move from concept through to manufacture and final build. Key Responsibilities • Design bespoke machinery from concept through to manufacture, • Produce 3D models, assemblies and detailed drawings using Autodesk Inventor, • Lead R&D, prototyping and new machine development, • Design sheet metal and stainless-steel fabricated components, • Ensure designs are practical, efficient and manufacturable, • Support machine build, test, installation and commissioning phases, • Contribute ideas to improve machine performance, build quality and efficiency Requirements • Mechanical Engineering degree or equivalent qualifications, • At least 3 year’s experience as a Mechanical Design Engineer within a machinery manufacturing environment, • Background designing bespoke machinery, conveyors or handling equipment, • Strong experience using Autodesk Inventor, • Good understanding of manufacturing processes and materials, • Experience with sheet metal design What’s On Offer • £43,000 – £53,000 salary depending on experience, • 30 days holiday (including bank holidays + Christmas shutdown), • Workplace pension, • Stable business with low staff turnover, • Real freedom to design, innovate and create new machinery, • Designing bespoke machinery, variety of designs, • Opportunity to build and shape a mechanical design function long-term, • Long term career progression If you would like to find out more, please get in touch with Adele Lewis: Mobile: 07537 163611 Office: 0151 209 2050 Email: adele.lewis@aspion.co.uk

Senior Network Engineer Glasgow, UK - Hybrid £75,000 - 95,000 - Depending on experience & qualifications We are proud to be supporting a fast-growing technology company at the forefront of satellite and cloud infrastructure in their search for a Senior Network Engineer. Because this engagement is sensitive, we'll share the client's name with candidates at the shortlisting stage. THE OPPORTUNITY Our client is building a next-generation network connecting satellites, ground stations, and cloud infrastructure. Operating across dynamic, intermittent links, their platform is designed to deliver data reliably into cloud-based workloads, a technically complex challenge requiring deep networking expertise. This role sits at the heart of their edge infrastructure, the servers and network devices deployed on-site at antenna locations to receive, demodulate, and transport satellite data to the cloud. It is a hands-on, high-ownership position spanning routing, overlay networking, edge systems, and cloud connectivity. KEY RESPONSIBILITIES Network Design & Architecture • Design L3 network topology across satellite, ground, and cloud environments, • Define IP addressing schemes, segmentation, and routing domains, • Model connectivity patterns and failure scenarios Routing & Connectivity • Implement and operate dynamic routing protocols, • Design route advertisement, filtering, and failover strategies, • Handle intermittent and flapping connectivity gracefully Overlay & Secure Networking • Build secure multi-hop paths with strong encryption and isolation, • Implement secure tunnel configurations (WireGuard / IPsec), • Define and enforce SSH access policies, firewall rules, and least-privilege communication Automation & Infrastructure • Develop automation pipelines using Terraform and Ansible, • Support scalable rollout and configuration management across distributed sites Operational Integration • Align networking behaviour with satellite scheduling and operational windows, • Design safe state transitions and failover scenarios, • Improve observability, monitoring, and alerting across the stack WHAT WE'RE LOOKING FOR Our client is seeking a Senior Network Engineer with strong technical fundamentals and a genuine passion for solving complex infrastructure challenges. You'll be comfortable working across architecture, implementation, and troubleshooting, and you take strong ownership of everything you touch. Essential Experience • Advanced-level experience with IP networking and routing, • Hands-on BGP experience covering design, operation, and troubleshooting; familiarity with distance-vector protocols, • Solid Linux networking skills, including VLANs, MTU, TCP/IP, and complex NAT, • Proven experience designing and operating VPNs and tunnelling technologies in distributed environments (WireGuard, StrongSwan, GRE + IPsec), • AWS networking expertise: VPC, TGW, Cloud WAN, VPN, and edge or hybrid networking, • Strong grasp of overlay vs underlay networking principles, • Extensive infrastructure automation experience with Terraform, Ansible, or equivalent, • Scripting or coding ability in Python, • Proven ability to debug complex, distributed systems Desirable • Exposure to satellite, telecom, or RF systems, • Experience with hardware operations, rack installation, or cable management, • Broader cloud platform experience beyond AWS WHY THIS ROLE STANDS OUT • Work on genuinely novel infrastructure at the intersection of space, ground, and cloud, • High ownership from day one, you'll design and ship, not just maintain, • Join a technically exceptional team building something with real-world impact, • Shape architecture at an early stage of a complex, mission-critical system, • An opportunity that sits at the cutting edge of clean technology infrastructure APPLY VIA CLEANTECH TALENT This role is being managed exclusively by Cleantech Talent on behalf of our client. If you have the background and ambition to take on this challenge, we would love to hear from you. Please apply directly through LinkedIn or reach out to the Cleantech Talent team with your CV and a brief note on your interest and relevant experience. All applications are handled in strict confidence.

SUPPORT ENGINEER (MECHANICAL) UK / REMOTE / HOME BASED - SHIFT BASED WORK BASE SALARY £25-31,500 MAX DOE PLUS BENS PACKAGE With locations based close to both London and Edinburgh, Grw Talent’s client has over 20 years of experience designing and delivering highly complex automated storage equipment and managing full turnkey projects from design through to installation, commissioning and through-life support; for clients in a variety of industries. The business is expanding into new geographies, new customers and developing new technologies. They now need to make the key hire of a Support Engineer to join an existing team. The Technical Support team typically work from home / remote. We will look at candidates based remotely across the UK as long as able to travel when needed. Our client provides 24/7 remote technical support to their customers. The Customer Support Technical Support Team works across mainly day and back shifts, some night shifts and weekend cover. Weekly contracted hours are 37.5. Reporting to the Head of Technical Support, the Support Engineer will take responsibility for triaging a range of machine hardware and software faults, working to resolve them remotely and at times onsite, as well as support customer training and supporting in-field proactive and reactive maintenance. Key responsibilities include: • Converse with the clients and establish their issues while acting to maintain the reputation of our company in a courteous and efficient manner., • Working to resolve both mechanical and software machine issues via a remote connection., • Utilising your skills to triage multiple jobs as they come in ensuring that the most pressing are dealt with first., • Reporting persistent issues or breakdowns through the appropriate channels, ensuring a thorough and accurate description of the issue is given., • Working from home – you must be able to focus while on shift to provide our clients with fast and efficient service., • Travel to various sites around the country and across the world to carry out work on the various machines they support., • Servicing of the machines to ensure smooth operation and the decreased likelihood of breakdowns., • Attending breakdowns to provide safe and thorough repairs to machines, getting them back online as soon as possible., • Training of clients so that they can operate their machinery safely and avoid any mistakes being made that could lead to breakdowns. The ideal candidate is educated to HNC level or time served in an engineering discipline – mechanical engineering preferred. Given that solid training is provided we are open to entry level candidates who want to build a career in field / customer service engineering. Candidates will need to show good capability in working through and resolving technical problems; both hardware and software. You will need to be highly PC / tech literate (especially in Microsoft Windows). We would love to hear from candidates with previous field service or remote engineering product support experience. A customer facing and polished personality is required, and this role will suit candidates who enjoy hands-on problem solving and practical projects in their spare time, such as building, repairing, or experimenting with equipment or technology. Additional requirements: a stable and reliable internet connection; ability to travel within and outside of the UK; driving license preferred. The pace and variety contained in this role make it super interesting and you will learn lots, inside an excellent team. Working largely remote with some occasional travel is a major plus. Your base salary of £25-31.5k DOE is backed up with a competitive benefits package including a company bonus scheme, and paid expenses when travelling. To apply for this role please send your resume and reach out to Katie Hydes from Grw Talent or apply via LinkedIn.

AV Installation Engineer Greater Manchester (UK Travel Required) Commercial / Industrial / Retail Salary: £30,000 to £35,000 per annum Plus Overtime, Van, Fuel Card, Tools Allowance & Excellent Benefits Alecto Recruitment are currently recruiting for a fast-growing leader in digital signage and AV xrnqpay solutions. A company helping shape the future of interactive retail, hospitality, and corporate environme... Is this the next step in your career Find out if you are the right candidate by reading through the complete overview below.

Job Overview We are seeking an experienced and motivated AV Engineer to join our growing team. The successful candidate will be responsible for delivering high-quality AV installation solutions across a variety of client sites, ensuring all work is completed to the highest standards and within agreed SLA targets. You will work closely with Operations, Technical, Project Management, and other key departments to ensure successful project delivery while maintaining professionalism and compliance with all Health & Safety requirements. Key Responsibilities Deliver AV installation solutions on client sites, including installation of screens, projectors, LED displays, and associated AV equipment Complete installations in line with company SLA requirements and quality standards Support and mentor Trainee AV Engineers, assisting with their development and technical knowledge Provide detailed installation reports, including photographs and relevant documentation Travel to client sites across the UK when required Maintain a professional and customer-focused approach on site Ensure compliance with all Health & Safety regulations and company procedures Collaborate with Operations, Technical, and Project Management teams to ensure successful project completion Key Objectives Deliver AV solutions that meet agreed SLA targets Support the training and development of junior engineers Work in accordance with HSE protocols and best practices Skills & Experience Required Previous experience in a similar AV Engineer or AV Installation role Experience working to strict SLA targets and deadlines Strong knowledge of AV solutions, including screens, projectors, and LED technology Understanding of audio and signal transmission technologies such as HDBaseT Knowledge of digital signage, networking, IP technologies, and wider AV systems Strong problem-solving skills and attention to detail Ability to work independently and as part of a team Full UK Driving Licence Ability to commute to the designated work location What We Offer Opportunity to work on exciting AV projects across the UK Ongoing training and career development Supportive and collaborative working environment Competitive salary and benefits package If you are passionate about AV technology and looking to join a dynamic and growing team, we would love to hear from you. TPBN1_UKTJ

Audio Visual Installation Engineer Location: Manchester-based with national travelReports to: Project and Installation ManagerSalary:

EDSB Integrated Solutions are national providers of Fire & Security, Electrical, Mechanical and Building Services.

Audio Visual Installation Engineer. Audio Visual Installation Engineer. Were recruiting for a skilled AV professional to install, maintain and support cutting-edge audio-visual and video-conferencing solutions for SME and large scale bu.

As an Air Conditioning Engineer, you will take responsibility for the installation, maintenance, and repair of air conditioning systems across commercial and domestic environments. NVQ Level 2 in Air Conditioning or equivalent. Independently complete maintenance, installations, and remedial repairs.

Are you an experienced Automation Engineer with a solid background in control systems, across a range of special purpose machinery? Can you write PLC software from scratch if needed? Do you want a role with less travel - where youll support the whole engineering team remotely across installation, co