Installation engineer jobs in CardiffCreate job alerts

Their projects range from large scale industrial solar installations to government backed eco installations. Solar PV Installation Engineer (Regional Patch) £50,000 - £52,000 (£70k OTE) + Van + Days only + Company Bonus + Health and Life Insurance Cardiff, South Wales. This role would suit somebo

Dual Fuel Engineer We are recruiting an experienced Dual Fuel Engineer to join a growing and supportive team delivering a mix of domestic and commercial metering work. This is a fantastic opportunity for engineers looking for a stable, structured role with a focus on quality over volume, without the pressure of unrealistic installation targets. Salary & Benefits • £42,000 xrnqpay (within M25), • £41,000 (outside Have you got what it takes to succeed The following information should be read carefully by all candidates. Please click on the apply button to read the full job description

Position: Installation & Commissioning EngineerJob ID: 3562/4Location: CardiffRate/Salary: £30,000 £40,000 DOEBenefits: 30 days holiday including bank holidays, commission scheme, company pension, cycle to work scheme, employee discounts, referral programme, company events, overtime availableType: Permanent HSB Technical Ltd is a specialist recruiter within the Fire xrnqpay & Security Power & Propulsion, The following information aims to provide potential candidates with a better understanding of the requirements for this role. Please click on the apply button to read the full job description

Solar PV Installation Engineer (Regional Patch).

Dual Fuel Engineer We are recruiting an experienced Dual Fuel Engineer to join a growing and supportive team delivering a mix of domestic and commercial metering work . This is a fantastic opportunity for engineers looking for a stable, structured role with a focus on quality over volume , without the pressure of unrealistic installation targets. Salary & Benefits £42,000 (within M25) £41,000 (outside ...

Commissioning, Maintenance, Installation, Pumps, Motors, 18th, Edition, C+G, Level 3, Pumping, stations, electrical, engineering, Installation, Planned, maintenance, Fault-finding, Technical, support, engineer, Field service, Reporting, travel, South Wales, South West, Swansea, Cardiff, Bristol, Bri

Rise Technical Recruitment Limited is seeking an Electrical Service Engineer based in Cardiff to provide services, installation, and commissioning of electrical systems.

ALECTO RECRUITMENT LTD is seeking an experienced Lead Commercial Gas Engineer to join their team in South Wales. The role involves overseeing installation, servicing, and maintenance of commercial gas systems while leading a team of engineers and apprentices.

Installation Engineer specializing in Security Systems in Cardiff, UK. The engineer will install Intruder Alarms, Access Systems, and CCTV, ensuring industry standards and exceptional service. Essential qualifications include experience in the Security industry, a valid driving license, and the capa

The role of IT Systems and Network Engineer entails being responsible for, the installation, configuration and commissioning of complex network servers, PC's and other systems such as CCTV and building monitoring systems that make up our maritime surveillance systems. Please note: The role of IT Sy

SRT Marine Systems plc is seeking an ambitious IT Systems and Network Engineer based in Cardiff, UK.The role involves installation and configuration of network servers and systems within maritime surveillance technology.Candidates must have 5+ years of experience in IT system setup, fluent English,

OCS Security in Cardiff is looking for a Security Systems Installation Engineer to enhance client relationships across various sectors. The role involves installing and commissioning Intruder Alarm, CCTV, and Access Control systems, along with maintaining high levels of customer satisfaction.

SRT Marine Systems plc based in the United Kingdom is seeking an experienced IT Systems and Network Engineer to manage the installation, configuration, and maintenance of complex network servers and systems in various global locations. Candidates should have at least 5 years of experience in network

JWB Recruitment are proud to be recruiting for a Senior Commercial Gas Engineer to work across South Wales. Our client is seeking an experienced and highly skilled Commercial Gas & HVAC Engineer to join their team, supporting a portfolio of sites throughout South Wales. This senior-level position is ideal for an engineer confident working independently across a wide range of commercial environments. You will be responsible for the installation, service, maintenance, and repair of commercial gas systems, air conditioning equipment, and oil‑fired plant. Sites include healthcare facilities, retail premises, education settings, and wider commercial buildings, so professionalism, strong communication, and consistently high standards of workmanship are essential. Key Responsibilities Installation, service, and repair of commercial gas systems Planned and reactive maintenance of gas and air conditioning systems Work on oil burners, boilers, and tanked oil systems Delivering high‑quality work across healthcare, retail, education, and commercial sites Ensuring full compliance with Gas Safety, F‑Gas, OFTEC, and industry standards Representing the company professionally on client sites across South Wales Experience & Qualifications Minimum 10 years’ experience in the HVAC or commercial gas industry Clean UK driving licence Current DBS or ability to pass standard and enhanced DBS checks Domestic & Commercial Gas qualifications (Natural Gas & LPG) OFTEC certification or strong experience with oil‑fired systems (desired) F‑Gas certification or strong working knowledge of A/C service and maintenance The Package Up to £50,000 basic salary (DOE) Door‑to‑door pay Stable, long‑term role with a respected regional employer Varied work across multiple commercial sectors Ongoing training and development across gas, HVAC, and oil disciplines

Mechanical Building Services Design Engineer Llantrisant 27960/610 £40,000 - £45,000 plus healthcare, pension and more. Benefits Package: A starting salary of between £40,000 - £45,000 Company pension scheme Healthcare plan 25 days holidays plus bank holidaysThis highly successful Mechanical & Electrical Building Services contractor has built a fantastic reputation for the quality, delivery and reliability of their Design and installation services. Extremely highly regarded in their industry, they are experts at delivering complete design services for a diverse client base throughout the UK, across commercial, industrial, government and healthcare sectors. They are growing their Mechanical department and are looking to recruit another two career focused Design Engineers to further support this growth. The role may suit a Mechanical Engineer from a Consultancy, looking to expand thier career within a faster paced environment. Alternatively you may be working for a Contractor and looking for an opportunity which provides a huge amount of autonomy and a chance to help drive the growth of a relatively new Mechanical department. Role & Responsibilities: Develop / implement mechanical building services design solutions, working on several projects simultaneously - commercial, healthcare, industrial. Conduct detailed analyses and calculations. Support the preparation and review of Mechanical design drawings. Liaise with BIM co-ordinators and leading activity in order to ensure that the design packages are produced to the required timescales and standards of quality. Provide support to the Project Managers during the design, installation commissioning and testing phases of the project, ensuring the timely production of all necessary documentation. Knowledge, Skills & Experience: Degree Qualified in Mechanical Engineering Demonstratable experience in detailed Building Services Design engineering, including Mechanical calculations on plant equipment, sizing pipework, schematics etc. Proven track record as an Engineer in both a design office and in construction. For further information please email If you are interested in this position please click 'apply'. Hunter Selection Limited is a recruitment consultancy with offices UK wide, specialising in permanent & contract roles within Engineering & Manufacturing, IT & Digital, Science & Technology and Service & Sales sectors. Please note as we receive a high level of applications we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business

Mechanical Building Services Design Engineer Job Type: Permanent Location: Cardiff Post Code: CF14 7JH Salary: Up to £50,000 + Company Pension, Health Insurance, On-site parking Start Date: ASAP Established Mechanical and Electrical Building Services Contractor in the Construction sector is currently looking to hire an experienced Mechanical Building Services Design Engineer. Your role will be to design mechanical services for a multitude of projects in the commercial, industrial, government and healthcare sectors. etc. with an emphasis on sustainable, low carbon design on high profile projects across the UK with leading architects, designers and contractors The job will include a wide range of duties, including but not limited to the following: Ensure full compliance with current Building Services Legislation and Engineering Standards. Develop and implement mechanical building services design solutions. Conduct detailed analyses and calculations. Support the preparation and review of Mechanical design drawings. Working on several projects simultaneously. Provide technical information required for manuals and other documentation. Liaise with BIM co-ordinators and leading activity in order to ensure that the design packages are produced to the required timescales and standards of quality. Provide support to the Project Managers during the design, installation commissioning and testing phases of the project, ensuring the timely production of all necessary documentation. Job Qualifications - Mechanical Building Services Design Engineer Engineering degree or relevant industry experience. Significant, demonstrable experience in detailed Building Services design engineering. You will have or be working towards a Chartered Institute of Building Services Engineers (CIBSE) Accredited qualification such as BEng (Hons), or BSc. Modification & production of mechanical documentation. Creating and modifying schematics. Proven track record as an Engineer in both a design office and in construction. Current knowledge of the engineering design software available in the marketplace, specifically a working knowledge and experience of using Revit. The role will suit individuals currently working as Mechanical Building Services Design Engineer and be living within a commutable distance of Cardiff, Newport, Ebbw Vale, Merthyr Tydfil, Rhondda, Swansea or be willing to relocate. Please forward your CV by clicking Apply Now

Job Title: Fire & Security Systems Engineer Job Overview We are seeking a skilled and motivated Fire & Security Systems Engineer to join a growing and professional technical team. This role involves the installation, maintenance, servicing, and fault diagnosis of a range of electronic security and life-safety systems across commercial and residential sites. The successful candidate will be committed to high standards of workmanship, customer service, and compliance, with strong technical knowledge and a proactive approach to problem-solving. Key Responsibilities Installation, commissioning, servicing, and maintenance of fire and security systems Fault finding and repair across multiple system types Working on systems including (but not limited to): Fire alarm systems Intruder alarms CCTV systems Access control systems Door entry and associated communications systems Completing works in line with relevant British Standards and regulations Accurately completing job reports and documentation Providing a professional and customer-focused service on-site Participating in an on-call rota (split into days, not weeks) Working Hours 08:00 – 16:30 Overtime paid at 1.5x when working past contracted hours on weekdays Paid travel time for journeys exceeding 30 minutes each way Benefits & Package 25 days holiday plus bank holidays Christmas bonus Performance-based bonus On-call rota split into days (no 7 consecutive days on call) Company vehicle Fuel card Smartphone and laptop All required tools and equipment provided (testers, drills, etc.) Dedicated training manager Access to a fully equipped training room for ongoing development and upskilling Training & Development You will benefit from structured and ongoing training, supported by a dedicated training manager. Additional training will be provided in any areas where development is required, ensuring continued technical progression and compliance with industry standards. Candidate Requirements Previous experience working with fire and/or security systems Strong fault-finding and diagnostic skills Good understanding of industry standards and regulations Full UK driving license Ability to work independently and as part of a team Professional attitude with strong communication skills

Fire and Security Engineer Cardiff and Surrounding areas £35,000-£42,000 Company van, overtime, holidays, Call out To apply for this opportunity you must have or hold the following: • Intruder Service Experience (Galaxy would be beneficial), • Fire Knowledge (Advanced, kentech and morley would be useful), • Knowledge of Intruder alarms, • Excellent customer service skills, • CCTV IP Knowledge also beneficial, • Fault Finding experience, • Installation experience, • Ability to work by yourself and within a team, • Full UK Driving license This company is a well-established organisation in the Fire and Security industry. They offer a wide range of services including design, maintenance and installation of intruder systems, CCTV, and access control. Due to planned growth within the installation and service department, they are now actively looking to recruit an experienced Security Service/Installation Engineers Benefits Include: • Company Vehicle, • Mobile Phone, • Stand by Allowances, • Call out Allowances, • Generous Annual Leave, • Time and a half plus double time if called out on a Sunday If you are looking for a new challenge and want to work for a forward thinking leading company Who will continue to expand and develop. Please contact George on the listed number (phone number removed) or ideally e-mail with a copy of your current CV

Maintenance Electrician – Cardiff (Permanent) £45,000–£50,000 + Company Van We are recruiting a Maintenance Electrician to join a long‑established organisation in Cardiff on a permanent basis. This role will suit both experienced maintenance electricians and senior/multi‑site engineers who are happy operating in a hands‑on role. The position offers long‑term stability, local work, and a strong package including a company van. Key Responsibilities: • Electrical maintenance, fault finding and repair works, • Planned preventative maintenance (PPM) and reactive tasks, • Working across commercial buildings and facilities, • Testing, inspection and minor install works, • Ensuring compliance with current electrical regulations Requirements: • NVQ Level 3 in Electrical Installation (or equivalent), • 17th or 18th Edition Wiring Regulations, • Proven experience in electrical maintenance (commercial ideal), • Confident fault‑finding and reactive maintenance skills, • Full UK driving licence What’s on Offer: • Salary £45,000–£50,000 depending on experience, • Company van provided, • Permanent, full‑time role, • Stable workload with long‑term prospects This role is ideal for electricians looking for a secure maintenance position, whether you’re a solid mid‑level engineer ready for consistency, or a senior electrician seeking a long‑term, hands‑on role without site travel all over the UK

Lift Engineer Cardiff, South Wales Lift Service & Lift Repair | Call-Out | Career Progression Salary: £50,000 – £55,000 DOE Benefits: £500/week standby, highly paid overtime, all travel paid, NVQ Level 4 & management progression Locations: Cardiff, Newport, Barry, Bridgend, Swansea, Llanelli, Cwmbran, Merthyr Tydfil, Gloucester, and surrounding South Wales areas. Marmon Lift Recruitment is recruiting for an experienced Lift Engineer to join a respected lift company covering Cardiff and South Wales. This is a service and repair role offering strong earning potential, a local route, and genuine long-term progression. You’ll take ownership of your service route, carrying out maintenance, repairs, fault-finding, and call-outs on passenger and goods lifts while ensuring high safety and service standards. The Lift Engineer Role Service, repair, and maintenance of passenger and goods lifts Electrical and mechanical fault finding Breakdown response and call-outs Planned preventative maintenance Accurate reporting of repairs and defects Requirements of a Lift Engineer NVQ Level 3 in Lift Engineering (or equivalent) Minimum 2 years’ lift industry experience Background in service, repair, or installation Full UK driving licence Within commuting distance of Cardiff Why Apply? Excellent overtime opportunities £500 per week standby allowance + money per call-out All travel expenses paid Stable South Wales route - no nationwide coverage Progression into management or technician roles Apply to this Lift Engineer position: For a confidential conversation, call (phone number removed) (Monday - Friday) Ping us your CV by email Marmon Lift Recruitment is passionate about understanding what truly matters to you in your next move before you begin the application or interview process. This commitment to you will ensure we represent your best interests at all times, and together we can secure your next move in the passenger lift industry

Lead Commercial Gas Engineer / Site Manager Salary: £48k-£50k + Company Van + Pension + Benefits Location - South Wales We currently have an excellent opportunity for experienced and senior level Commercial Heating / Gas Engineer to join a well-established client of ours who specialise in the commercial heating, mechanical services and technical engineering sector. Due to continued growth, we are seeking an experienced Lead Commercial Gas Engineer / Site Manager to join their team and with the role being split across both aspects. The role is based in the South Wales region, therefore you will need to live somewhere in the South Wales area. Role Overview Carrying out installation, servicing, maintenance and fault-finding on commercial gas boilers, heating systems, pipework and associated controls. Leadership duties - acting as a lead engineer on site, supervising engineers, apprentices and managing day to day workload. Plan labour, materials etc. Lead site meetings and liaise with clients. Skills & Experience Required Proven experience as a Commercial Gas Engineer ACS qualifications such as CODNCO1, CIGA1, ICPN1, TPCP1A or equivalent Strong fault-finding and diagnostic skills on commercial plant Ideally experience in a supervisory or management type position SSSTS or SMSTS qualification would be preferred - however training can be provided Project Management experience beneficial Full UK driving licence South Wales based To apply for this role, please forward your CV to Mike Prew at Alecto Recruitment or give us a call in strict confidence. INDG Heating Engineer, Gas Engineer, Commercial Gas, Heating, Gas Safe Registered, Boiler Service, Oftec, LPG, Natural Gas, Commercial Gas Engineer

Chiller Engineer Cardiff £45,000 - £55,000 per annum A leading specialist in high-efficiency chillers, heat pumps, and low carbon HVAC solutions. They have been delivering innovative cooling and climate control systems across the UK for over 30 years. Operating across sectors including data centres, healthcare, commercial buildings, and industrial facilities, the company is recognised for its technical expertise, environmentally conscious approach, and commitment to delivering energy efficient solutions through design, installation, service, and maintenance support. Key Responsibilities: Carry out planned preventative maintenance, servicing, and reactive repairs on a range of chiller and HVAC equipment Diagnose and fault-find on air-cooled and water-cooled chillers, close control, and associated systems Attend breakdown callouts and provide technical support across critical environments including data centres and healthcare facilities Complete service reports, maintenance documentation, and compliance paperwork accurately and efficiently Maintain strong working relationships with customers while delivering high standards of service and technical support Ensure all work is carried out in line with F-Gas regulations and health & safety standards Package: £45,000 - £55,000 per annum Door to door travel paid Overtime opportunities Company vehicle 25 days annual leave + Bank Holidays Pension scheme Ongoing manufacturer and technical training Career progression opportunities What You'll Need: Previous experience working as a Chiller Engineer or HVAC Service Engineer Strong knowledge of chiller systems, refrigeration circuits, and associated HVAC equipment F-Gas qualification Experience working on critical cooling systems desirable Excellent fault-finding and diagnostic skills Full UK driving licence Strong customer-facing and communication skills Interested in hearing more? Call Peter Caulfield on +4423 9285 2310 or Email WR HVAC | M&E are #1 recruitment partner for HVAC jobs. Our customers include a range of large and small M&E companies, manufacturers and suppliers of heating, ventilation, air conditioning and refrigeration equipment. We recruit UK wide for sales, management and technical jobs. WR is acting as an Employment Agency in relation to this vacancy. TPBN1_UKTJ

What will you be doing? As a Project Engineer, you'll support the successful delivery of substation projects, ensuring all engineering activities are completed safely, accurately, and to the highest standards. With hands-on experience, strong problem-solving skills, and the ability to work effectively with project managers, site teams, and external stakeholders, you will: Oversee site supervisors, craft teams, and subcontractors on a daily basis Communicate regularly with client site representatives and attend progress meetings Monitor and manage project costs Prepare method statements, work instructions, and risk assessments Provide information for contract status reports and other client deliverables Maintain accurate project records to support claims and commercial reporting Plan and coordinate labour, plant, and materials for substation works Liaise with procurement to ensure timely availability of equipment and materials Ensure compliance with relevant standards and company procedures Manage health and safety across site teams and subcontractors What you'll bring: Knowledge of Construction and Health & Safety regulations Site supervision experience on high-voltage substation projects (132kV and above preferred) Experience managing technical aspects of substation construction, installation, and commissioning Electrical Background Familiarity with civil and electrical works Experience managing subcontractors and recording measurements ersg are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants. We do not discriminate against applicants on the basis of age, sex, race, disability, pregnancy, marital status, sexual orientation, gender reassignment or religious background; all decisions are based on merit

Chiller Engineer Cardiff £45,000 - £55,000 per annum A leading specialist in high-efficiency chillers, heat pumps, and low carbon HVAC solutions. They have been delivering innovative cooling and climate control systems across the UK for over 30 years. Operating across sectors including data centres, healthcare, commercial buildings, and industrial facilities, the company is recognised for its technical expertise, environmentally conscious approach, and commitment to delivering energy efficient solutions through design, installation, service, and maintenance support. Key Responsibilities: Carry out planned preventative maintenance, servicing, and reactive repairs on a range of chiller and HVAC equipment Diagnose and fault-find on air-cooled and water-cooled chillers, close control, and associated systems Attend breakdown callouts and provide technical support across critical environments including data centres and healthcare facilities Complete service reports, maintenance documentation, and compliance paperwork accurately and efficiently Maintain strong working relationships with customers while delivering high standards of service and technical support Ensure all work is carried out in line with F-Gas regulations and health & safety standards Package: £45,000 - £55,000 per annum Door to door travel paid Overtime opportunities Company vehicle 25 days annual leave + Bank Holidays Pension scheme Ongoing manufacturer and technical training Career progression opportunities What You'll Need: Previous experience working as a Chiller Engineer or HVAC Service Engineer Strong knowledge of chiller systems, refrigeration circuits, and associated HVAC equipment F-Gas qualification Experience working on critical cooling systems desirable Excellent fault-finding and diagnostic skills Full UK driving licence Strong customer-facing and communication skills Interested in hearing more? Call Peter Caulfield on (phone number removed) or Email WR HVAC | M&E are #1 recruitment partner for HVAC jobs. Our customers include a range of large and small M&E companies, manufacturers and suppliers of heating, ventilation, air conditioning and refrigeration equipment. We recruit UK wide for sales, management and technical jobs. WR is acting as an Employment Agency in relation to this vacancy

The Electrical Field Service Engineer will be responsible for the commissioning, maintenance and repair of AC Chargers, Rapid DC, Ultra and High-Power Charging (HPC) EV Chargers across sites in the UK. This role is suited to someone with a strong electrical background who can work independently and deliver high-quality technical support on-site. You will ensure that all EV charging stations operate at peak performance and meet the high standards of our company and clients. This role will require someone who is comfortable working in various environments, including outdoor sites and confined spaces. Occasional travel and overnight stays will be required. Job requirements Essential: NVQ Level 3 Electrical Qualification. Minimum 2 years’ experience in a field-based engineering role (commissioning, maintenance, or repair of electrical systems/equipment). Demonstrated ability to work independently on client sites and resolve technical issues without direct supervision. Experience working under SLA-driven environments. Familiarity with basic test and measurement equipment such as multimeters and voltage testers. Excellent problem-solving skills with the ability to diagnose and repair complex technical issues. Strong communication and interpersonal skills for effective customer interaction. Ability to manage time effectively while travelling between client sites. Valid UK driving licence with 6 penalty points or less. Desirable: BS7671:2018 (18th Edition Wiring Regulations). City & Guilds 2391/2394 Testing and Inspection. Previous experience in the EV charging, renewable energy, or power electronics sectors. EV charging station certification or manufacturer-specific training. Hands-on experience with commissioning, maintaining, and repairing Rapid DC, Ultra and HPC EV chargers. Proficient in reading and interpreting electrical schematics and technical manuals. Understanding of analogue & digital electronics and components. Awareness of electrical hazards and on-site H&S requirements. Job responsibilities Work collaboratively with the Service Coordination and Operations teams to ensure accurate job completion data and timely follow-up on service reports. Commission and configure AC and Rapid DC chargers at client sites. Conduct initial set up and testing to ensure correct operation and compliance with industry standards. Collaborate with the project management and installation teams to ensure seamless integration of charging stations with client infrastructure. Maintain company assets, tools, and test equipment in good working order and report any defects immediately. Perform routine and preventive maintenance on EV charging stations to ensure optimal performance and uptime. Diagnose and troubleshoot technical issues, including electrical, mechanical and software-related problems. Conduct diagnostic tests, firmware updates and calibration of EV chargers as necessary. Replace faulty components and occasionally entire AC chargers. Ensure that all repairs are completed in accordance with manufacture guidelines. Provide on-site technical support and training to clients on the use and operation of EV chargers. Respond to service requests promptly and maintain effective communication with clients to ensure customer satisfaction. Document all service activities, including repairs, maintenance and customer interactions in the service management system. Adhere to all safety regulations and company policies while working in the field. Ensure compliance with local electrical codes and standards during commissioning and maintenance activities. Participate in regular safety training and certifications as required. Job benefits Structured career progression framework Company van + fuel card Overtime 30 days annual leave (inclusive of company shutdown days) Travel subsistence provided Discretionary Company performance bonus BUPA Healthcare (after 6 months) Salary Sacrifice Pension Scheme (8% total) Salary Sacrifice EV Car Scheme & Charger Installation Salary Sacrifice Holiday Purchase Scheme (up to 5 days) Enhanced Family Friendly Policies Additional benefits platform for you to select a wide range of discounted benefits and services Long Service Awards

SRT Marine Systems plc (SRT) are a market leader in its domain of international marine surveillance technology and systems. We are respected, established and an ambitious multi-national company headquartered in the UK with a global customer base. The company has a global impact in the marine domain by leading the next generation of Maritime Domain Awareness 'MDA' technologies, products and systems that significantly enhance, security, safety and environment protection and sustainability. Our customers are worldwide and range from the largest national coast guards to individual vessel owners. SRT is an exciting company where high quality results are rewarded. We are ambitious and are constantly seeking to innovate to deliver better products and services to our customers. We strive to make SRT a rewarding and challenging place to work where talented hard-working individuals have the opportunity to make a real impact across the marine world. Role Overview This role is ideal for a talented and ambitious professional IT Systems and Network Engineer. The role of IT Systems and Network Engineer entails being responsible for, the installation, configuration and commissioning of complex network servers, PC's and other systems such as CCTV and building monitoring systems that make up our maritime surveillance systems. Along with their ongoing maintenance and issue trouble shooting and resolution. Please note: The role of IT Systems and Network Engineer is a role where you will travel globally for our projects, whether this is the Middle East, Far East, South East Asia, Africa's region - you will be expected to travel and live in country with an agreed rotation period up to 12 weeks in-country,2 weeks home. Responsibilities - IT Systems and Network Engineer Configuration and deployment of networked servers, storage, network (hardware and related software packages) and other IT system support infrastructure Check and validate installations, and provide reports Configuration and troubleshooting of different types of connectivity systems Monitor system performance, undertake trouble shooting and resolution and implementation of software patches and hardware replacements Support and train customer internal IT departments and technicians to enable them to take operational ownership and responsibility of the systems we have supplied - day to day maintenance, issue identification and resolution Maintain good document trails of system changes and updates Requirements - IT Systems and Network Engineer ESSENTIAL - A minimum of 5 years network IT system setup and management experience in either commercial or industrial environments ESSENTIAL - Professional English language - spoken and written ESSENTIAL - Deep understanding of IT networks and server system configurations and set up - in particular Windows/Linux servers and networking (TCP/IP, DNS, VPN) Experience with virtualisation (VMware/Hyper-V) and cloud platforms (AWS/Azure) advantageous Strong understanding of IT security and data protection best practices Strong analytical and problem-solving skills Excellent teamwork and communication abilities Benefits - IT Systems and Network Engineer Highly competitive salary, fantastic accommodation and flights IAW company policy Private Healthcare & additional benefits package Development opportunities SRT Marine Systems plc are an equal opportunity employer. We are committed to creating an inclusive working environment for all employees and actively encourage applications from all sectors of the community

About the Role RG Setsquare is recruiting on behalf of one of the UK's most established independent building services and facilities management contractors - a business with over a century of heritage, a blue-chip client base, and a strong reputation for investing in the quality of its people. We are looking for an experienced Commercial Gas Engineer to join their mobile field engineering team on a permanent basis. You will cover a diverse portfolio of commercial sites - including corporate offices, public sector buildings, healthcare facilities, and high-profile private sector premises - delivering planned and reactive gas and heating maintenance to a consistently high standard. This is a well-remunerated role with a salary of up to £45,000, company vehicle, and a genuine opportunity to build a long-term career with a contractor that takes technical quality seriously. What You'll Be Doing As a Commercial Gas Engineer, your responsibilities will include: Carrying out planned preventive maintenance (PPM) on commercial gas and heating systems across a managed portfolio of client sites Responding to reactive maintenance and breakdown call-outs, diagnosing faults and restoring systems to full operation with minimal client disruption Servicing, fault-finding, and repairing commercial boilers, heating systems, and associated plant - including pressurised systems and heat exchangers Installing and commissioning commercial gas appliances and pipework in line with current Gas Safe and industry regulations Carrying out gas safety inspections and issuing appropriate certification Ensuring compliance with all relevant legislation including Gas Safety (Installation & Use) Regulations Identifying and quoting for additional or remedial works arising from site visits Completing job reports, service records, and CAFM system updates accurately and on time Liaising professionally with clients, site managers, and the internal operations team Working safely at all times in accordance with company health & safety proceduresWhat We're Looking For Essential: Full Gas Safe registration with commercial gas competencies - as a minimum, COCN1 Proven experience servicing and maintaining commercial boilers and heating plant in an FM or building services environment Strong fault-finding and diagnostic skills across a range of commercial gas equipment Sound knowledge of current gas safety legislation and industry standards Ability to work independently across multiple sites and manage your own workload effectively Full UK Driving Licence Professional, client-facing approach and strong communication skillsDesirable (not essential): CPCS1 / ICPN1 - Commercial Pipework Unvented hot water systems qualification Oil boiler servicing or OFTEC registration Experience with CAFM or job management systems Any additional mechanical trades skillsAbout Our Client Our client is one of the UK's leading independent building services companies, with specialist capabilities spanning mechanical and electrical engineering, facilities management, energy services, and water treatment. With over 100 years of trading history and a portfolio of long-standing relationships with some of the UK's most recognised public and private sector organisations, this is a stable, professional, and highly regarded employer in the FM sector. The business invests heavily in its people - with structured induction programmes, an internal training Academy, funded qualifications, and a strong track record of internal progression. Full details will be provided to shortlisted candidates. The Package Up to £45,000 per annum depending on experience and qualifications Company vehicle provided Fuel card Company pension scheme Learning and development opportunities through the client's internal training Academy Funded qualifications and structured career progression Structured induction and ongoing operational support Stable, long-term employment with one of the UK's most established FM and building services contractorsHow to Apply This vacancy is being managed by RG Setsquare. To be considered, please submit your CV via CV-Library. Shortlisted candidates will be contacted directly by our team with full information on the client, the patch covered, and the next steps in the process. RG Setsquare specialises in technical and FM recruitment across the UK, placing skilled trades and engineering professionals with leading contractors and service providers at every level RG Setsquare is acting as an Employment Agency in relation to this vacancy

Field Based Driver/Tradesperson - Nationwide Contract / Ad-Hoc Role Rapid Resource are currently recruiting for several drivers/trades people to support nationwide cash machine installation projects on behalf of our client, NCR Atleos. This is an excellent opportunity for reliable, hands-on individuals who are comfortable travelling, working within a team environment, and carrying out physical installation duties. Please note this role is offered on an ad-hoc basis. Whilst we anticipate engineers will be kept busy during peak periods, we cannot guarantee 5 days of work per week. The Role Working as part of a 3-person team which includes one Site Manager you will assist with the installation and movement of cash machines across the country. The role will involve loading heavy cash machines and associated equipment into company vehicles using appropriate machinery and tools, travelling to customer sites, and assisting with installations. Working hours will vary and flexibility is essential, as out-of-hours and early morning starts will regularly be required depending on installation schedules and site locations. You may also be required to stay away overnight. A typical installation takes approximately 4 hours excluding travel time. Full training will be provided. Key Responsibilities Assist with the installation of machinery Use handheld tools and machinery to safely move and transfer ATM machines Load and unload Cash Machine equipment into company vehicles Travel nationwide to customer sites in a company-provided van Work effectively as part of a 3-person installation team Deliver a professional and positive attitude on-site Resolve unexpected issues using practical problem-solving skills Support additional overtime and extended hours during busy periods Requirements Full UK Manual Driving Licence Experience using manual, handheld & power tools Willingness to travel nationwide and stay away when required Confident driving in a variety of locations Candidates must be physically fit and able to safely lift and move heavy loads as part of the role. Flexible approach to working hours, including out-of-hours work Strong communication skills Ability to work well within a team environment Good practical and problem-solving abilities Successful completion of a pre-employment screening assessment prior to commencing work Working Environment This role is physically demanding and may involve: Frequent travel and long journeys Carrying and lifting tools and equipment between 1–20kg Prolonged periods of standing, walking, bending, squatting, twisting, climbing and lifting Working in confined or awkward positions Working under pressure and maintaining professionalism within customer-facing environments Preferred Experience Experience travelling long distances for work Previous experience working on Cash Machine projects is advantageous Additional Information Nationwide role Company van & Fuel Card provided for work duties Ad-hoc / project-based work * Additional hours available during busy periods If you are hardworking, flexible, and enjoy field-based work within a team we would like to hear from you. Rate: £180.00 per day This position operates within the IR35 therefore you will be required to operate via an Umbrella Company. Rapid can assist you with this

Electrical Field Service Engineer Location: South Wales Sector: EV Infrastructure Salary: £34-48,000 Plus Excellent Benefits Job description Holt Engineering is working with a growing organisation within the EV infrastructure sector to recruit an Electrical Field Service Engineer responsible for the commissioning, maintenance and repair of AC, Rapid DC and High-Power EV charging systems across customer sites throughout the UK. This role is ideal for a qualified electrical engineer with strong commercial or industrial installation and maintenance experience, looking to work within a fast-growing and technically progressive environment supporting critical EV charging infrastructure. The successful candidate will carry out commissioning, fault-finding, preventive maintenance and technical support activities on a range of EV charging systems while ensuring high levels of safety, performance and customer satisfaction. The position involves a mix of field-based electrical, mechanical and software troubleshooting, working independently across a variety of environments including outdoor sites and confined spaces. Candidates should be comfortable interpreting electrical schematics, using diagnostic test equipment and working within SLA-driven service environments. Essential Level 3 Electrical Qualification (e.g. City & Guilds or equivalent). AM2 certification. Minimum 3 years’ proven hands-on experience in commercial or industrial electrical installations or maintenance. BS7671 – IET Wiring Regulations (18th Edition). City & Guilds 2391-52 Inspection & Testing. Valid JIB Gold Card. Experience working under SLA-driven environments. Familiarity with test and measurement equipment such as multimeters and voltage testers. Excellent problem-solving skills with the ability to diagnose and repair technical issues. Strong communication and interpersonal skills for effective customer interaction. Ability to work independently and manage time effectively while travelling between client sites. Valid UK driving licence.Desirable Previous experience in a field service role, preferably in EV charging, renewable energy, or power electronics. EV charging station certification or manufacturer-specific training. Hands-on experience commissioning, maintaining, or repairing Rapid DC, Ultra and HPC EV chargers. Ability to read and interpret electrical schematics and technical manuals. Understanding of analogue & digital electronics and components. Strong awareness of electrical hazards and site H&S requirements.Key responsibilities Work collaboratively with the Service Coordination and Operations teams to ensure accurate job completion data and timely follow-up on service reports. Commission and configure AC and Rapid DC chargers at client sites. Conduct initial set up and testing to ensure correct operation and compliance with industry standards. Collaborate with the project management and installation teams to ensure seamless integration of charging stations with client infrastructure. Maintain company assets, tools, and test equipment in good working order and report any defects immediately. Perform routine and preventive maintenance on EV charging stations to ensure optimal performance and uptime. Diagnose and troubleshoot technical issues, including electrical, mechanical and software-related problems. Conduct diagnostic tests, firmware updates and calibration of EV chargers as necessary. Replace faulty components and occasionally entire AC chargers. Ensure that all repairs are completed in accordance with manufacture guidelines. Provide on-site technical support and training to clients on the use and operation of EV chargers. Respond to service requests promptly and maintain effective communication with clients to ensure customer satisfaction. Document all service activities, including repairs, maintenance and customer interactions in the service management system. Adhere to all safety regulations and company policies while working in the field. Ensure compliance with local electrical codes and standards during commissioning and maintenance activities. Participate in regular safety training and certifications as required.Benefits Structured career progression framework Company van and fuel card Overtime available 30 days annual leave, including company shutdown days Travel subsistence provided Company performance bonus BUPA healthcare after 6 months Salary sacrifice pension scheme with 8% total contribution Salary sacrifice EV car scheme and charger installation Salary sacrifice holiday purchase scheme of up to 5 additional days Additional benefits platform with access to a wide range of discounts and services Long service awards

Astute's Power Team are currently recruiting for 2 Electrical Commissioning Technicians to join the commissioning team for their team on the installation of the synchronous condenser on the operational CCGT plant based Pembrokeshire. These roles are to cover 12 hour night shifts for 3 months initially. The Electrical Commissioning Technician positions come with a day rate from £400.00 to £500.00 outside of IR35. Role responsibilities and key skills for the role: Hands-on commissioning of electrical components and systems such as, transformers, medium/low voltage switchgears, DC systems, rectifiers, inverters, motorized valves, instruments etc. Fully competent at using Primary & Secondary Injection test set equipment. Assist the commissioning engineers in carrying out testing on electrical systems and equipment, as well as system optimization and troubleshooting and filling-in the respective commissioning documentation and protocols Participation in the walk-downs for Turnover from construction to commissioning, identifying open items that prevent system start-up. Preparation of the site for the electrical team to plan ahead for site works. Report to the Lead Electrical Commissioning Engineer for this project. At least 7 years working experience in power stations Electrical (MV/LV and I&C) Commissioning activities with demonstrable experience in a leading role in projects of similar relevance as an Electrical Technician. Strong team spirit, working with an international team and other cultures. Excellent communication skillsLocation, day rate and timeframe of the Electrical Commissioning Technician positions: Pembrokeshire £400.00 to £500.00 per day (Outside IR35) Immediate start date 3 months INDPOW Astute People are acting as an employment business in relation to this vacancy. We do not discriminate on the grounds of age, race, gender, disability, creed or sexual orientation and comply with all relevant UK legislation. We encourage applications from individuals from all backgrounds but candidates must be able to demonstrate their ability to work in the UK. Astute is also committed to the government's Disability Confident Employer initiative. We endeavour to get back to everyone, however, if you have not heard anything after 7 days, please consider your application unsuccessful

Electrical Service Engineer (Industrial Automation Training) £48,000 - £58,000 (OTE £65,000) + Company Van (Personal / Work Mileage) + 40 Hours per week (Paid Lunch) + 33 Days Holiday rising to 38 after time served Workshop based with ~30% Travel, Commutable from Cardiff, Newport, Caerphilly, Bridgend, Chepstow and surrounding areas Are you an Electrical Engineer, Maintenance Engineer, Service Engineer or similar looking to further your career within a growing industry expert, where you will be heavily invested in through technical training on systems such as Siemens and ABB, all whilst furthering your career as they go through an exciting period of growth? This is a rare and genuinely exciting opportunity to work on automation equipment in industrial environments, where you will receive external training from industry leaders, all whilst playing a vital role in the success of the company. This company, established for over 3 decades and a close knit team of 12, are now expanding and looking to recruit a passionate electrical engineer looking for further opportunities. This role will suit an Electrical Engineer, Maintenance Engineer, Service Engineer or similar looking to further your career within a growing industry expert, where you will be heavily invested in through technical training on systems such as Siemens and ABB, all whilst furthering your career as they go through an exciting period of growth. The Role: Service, Installation and Commissioning on Electrical systems Workshop based with occasional travel and some stays away, ~ 1 week spent away per 6/7 weeks *Further technical training on technical systems such as ABB and Siemens. The Person: Holds a UK License Electrical background Reference Number: (phone number removed) To apply for this role or to be considered for further roles, please click "Apply Now" or contact Harry Heal at Rise Technical Recruitment. Keywords: Electrical Engineer, Service Engineer, Maintenance Engineer, Field Service Engineer, Commissioning Engineer, Automation Engineer, Controls Engineer, Siemens, ABB, PLC, Control Systems, Industrial Automation, SCADA, HMI, Variable Speed Drive, VSD, VFD, Inverter, Fault Finding, Installation, Commissioning, Electrical, 18th Edition, Low Voltage, LV, Drives, Industrial, Workshop, Cardiff, South Wales Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates

A growing and well-established fire safety provider is seeking a motivated Firestopping Engineer to join their Passive Fire Protection team on a full-time, permanent basis. This is an excellent opportunity for a reliable Firestopping Engineer looking to develop a long-term career within fire safety, working across a variety of commercial and residential sites UK wide. The successful Firestopping Engineer will be joining a professional, supportive team that delivers passive fire protection works to a high standard, helping to maintain the fire integrity of buildings and protect lives. The Firestopping Engineer's Role The Firestopping Engineer will be responsible for carrying out fire stopping installations, inspections and remedial works across a range of projects. They will seal service penetrations, joints, walls and floors using approved fire-resistant materials, ensuring works are completed in line with fire safety regulations and project requirements. The Firestopping Engineer will read drawings, follow fire safety plans, use PDA-based systems where required, and communicate clearly with managers, clients and site teams. They will also help identify delays, maintain strong site standards and represent the business in a professional manner. The Firestopping Engineer The successful Firestopping Engineer will ideally have: NVQ Level 2 in Passive Fire Protection, preferred FIRAS card, preferred but not essential Experience with fire barrier systems, fire curtains or Rockwool-style systems Experience with ablative batt works A full UK driving licence Good communication and organisational skills A punctual, polite and professional approach The ability to manage their own diary and work independently A willingness to learn new systems and software This role would suit a hands-on Firestopping Engineer who is keen to progress within a busy and reputable fire safety environment. In Return? £27,000 - £35,000, depending on experience Company vehicle or Car Allowance 31 days' holiday, including bank holidays Private medical insurance Sick pay Health and wellbeing programme Ref: LB12026 If you are a Firestopping Engineer considering your next career move, this is a strong opportunity to join a growing fire protection specialist. Fire Stopping Engineer / Firestopping / Passive Fire Protection / Fire Protection / Fire Safety / Fire Barriers / Ablative Batt / Fire Curtains / Compartmentation / Fire Compliance / Building Safety / Fire Stopping Installation / Fire Stopping Inspection

This is an excellent opportunity for a Mobile Service Engineer to join the team at Nationwide Platforms. As Mobile Service Engineer you'll visit a variety of custo.

Lloyds Datum and the wider Infrastructure team delivers essential technical services that ensure the safety, quality and compliance xrnqpay of major construction and civil engineering projects across the UK & Irel.

Fire & Security Service Engineer Redhill £30,000 – £38,000 DOE + Overtime + Standby Allowance + Travel Time Benefits Paid travel time Overtime opportunities Standby/call-out allowance Company vehicle Phone & laptop provided 25 days holiday + bank holidays Pension scheme Bonus scheme Ongo

We are recruiting for an experienced Senior Electrical Engineer to join a heavy industrial site in Cardiff.

The SPTS division of KLA, designs, manufactures and markets wafer processing solutions for the global semiconductor and related industries.SPTS provides industry leading etch and deposition process technologies on a range of single wafer handling platforms.End-market applications include micro-elect

Field Service Engineer Ground Source Heat Pump Service Engineer (Specialist Systems / Field Services Engineer) ---------------------------------------- Term: Permanent, Full-Time Salary: £40,000 £55,000 (DOE) Location: Mansfield-based role (UK-wide travel) Working Pattern: Fully Remote / Field-Bas

Salary: £38,000 + Van & Fuel Card.We're seeking a qualified Electrician to join a well-established social housing contractor, covering a large North West London and surrounding areas.This is an excellent opportunity for someone who takes real pride in their workmanship and wants to play a key role

Commercial Electrician (South Wales).A growing commercial electrical contractor delivering projects across sectors including infrastructure, commercial fit-out and specialist works.Due to sustained growth and a strong pipeline, they are looking to strengthen the team with an experienced electrician

Field Service Engineer (Pumps). Are you a Pump Engineer ready to step into a role with a specialist in water treatment services offering training on water hygiene, genuine progression to supervisor/team leader roles and a chance to boost your income with lots of overtime at.

Swimming Pool Service Engineer. Swimming Pool Service Engineer.