Instrumentation jobs in United Kingdom

Theatre Practitioner – Orthopaedic Scrub Location: Northwood 37.5 Hours | Permanent Salary: Up to £40,000 per year (dependent on experience, training, and qualifications) Role Overview We are seeking an experienced and dedicated Theatre Practitioner specialising in Orthopaedic Scrub to join a busy and supportive surgical team. This role focuses on delivering high-quality perioperative care within orthopaedic procedures, ensuring patient safety and clinical excellence at all times. Key Responsibilities • Act as Scrub Practitioner for a range of orthopaedic procedures, ensuring instruments and equipment are prepared and available, • Maintain a sterile field and adhere to strict infection prevention and control standards, • Anticipate the needs of the surgeon and surgical team throughout procedures, • Ensure all orthopaedic instrumentation and implants are checked, prepared, and used appropriately, • Support safe and effective theatre set-up according to specific orthopaedic procedures and patient needs, • Work collaboratively with the wider multidisciplinary team to ensure efficient theatre lists, • Monitor and maintain equipment safety, reporting any faults promptly, • Contribute to a positive, professional, and patient-focused theatre environment Requirements • Registered Nurse (NMC) or Operating Department Practitioner (HCPC), • Minimum of 1 year’s experience within orthopaedics across scrub, anaesthetics, or recovery, • Experience or confidence in working as a Scrub Practitioner (orthopaedics preferred), • Strong knowledge of orthopaedic procedures, instrumentation, and implants, • Sound understanding of infection control, patient safety, and perioperative best practice, • Ability to work effectively under pressure in a fast-paced environment, • Excellent communication and teamwork skills, • High level of accuracy, attention to detail, and commitment to delivering safe surgical care Working Pattern • The hospital is closed on Sundays, • Flexible working arrangements can be discussed at interview This is an excellent opportunity for a Theatre Practitioner with orthopaedic experience looking to further develop their skills within a supportive and high-performing theatre team.

Wolfe Vets is an equal opportunities employer. We celebrate diversity in all its forms and are committed to creating a meritocratic and inclusive environment for our people. About us: Launched in June 2020, Wolfe Vets is independently owned, with RCVS accredited small animal veterinary care based in Chiswick and Fulham. We offer an exceptional standard of round the clock care, with referral treatments and facilities, as well as all the routine consultations, health checks and procedures expected at a family vet. We are passionate about pets and animal welfare; we believe that pets and their owners deserve to be treated with expertise and compassion. Our fantastic team: Without our brilliant team, Wolfe Vets would not be able to offer an exceptional level of care to our furry patients and their humans. We value every member of the Wolfe Vets team: listening to good ideas, prioritising staff development and using cutting-edge technologies to work to the highest standards. Alongside our exceptional team, you will have the opportunity to work with a variety of visiting specialists that are all advanced certificate holders in their chosen fields which is an exciting part of our team’s development allowing the exposure to complex cases. We think that Wolfe Vets is a great place to work and understand that looking after each other (as well as the animals in our care) is vital. In short, we want our people to flourish, and nothing makes us happier than watching a member of our team grow and develop. The role: Technical Experience Specification: (essential) • You are an experienced, confident and able veterinary surgeon who is used to managing cases from first consultation through full diagnostic work., • Proven experience in the diagnosis, treatment, and monitoring of outcomes, including hospitalising patients and monitoring them during hospitalisation., • Experience in a range of procedures including:, • Gastrotomy, enterotomy(ectomy), splenectomy, liver biopsy, lymph node biopsy, cystotomy., • Head and neck procedures: Pinnectomy, grid keratotomy, enucleation and eyelid surgery., • Tumour staging and removal without advanced wound closure techniques., • Limb, digit and tail amputation., • Dental expertise: the ability to take and interpret dental X-rays, perform surgical and closed extractions., • Competent in use of ultrasound: A-FAST, T-FAST, EPIC Scan, examination of liver, spleen, kidneys and bladder., • Able to diagnose cruciate disease and elbow dysplasia and hip dysplasia on clinical exam and follow up radiography. Essential to the role: • Excellent clinical record keeping, • You can confidently and accurately estimate and charge for procedures, • With outstanding client management skills: you derive real satisfaction from finding solutions to problems, • Empathetic, open and honest communication skills, • Committed and hard-working, you truly enjoy looking after every animal in your care., • A team player, you enjoy working with and learning from others., • We are looking for a future business partner, who is excited by the opportunity to help the business grow. It is essential that you are commercially driven and motivated by our ambitious plans., • No criminal record Skills of specific interest to us: We are particularly keen to develop our practice in the following areas, and (whilst not essential) we would welcome experience in the following areas: Laparoscopy Arthroscopy Intra-thoracic surgery Total hip replacement Intra-ocular surgery Preferred Practical Skills & Experience: (not essential) • Adrenal, pancreatic, GI and cardiac ultrasound, • Advanced ophthalmology examinations and surgical procedures, • Liver lobectomy, GI stapling, nephrectomy, adrenalectomy, colectomy, anal gland excision, perineal hernia repair, colposuspension, urethrotomy(ostomy)., • Advanced wound closure techniques, • Endoscopy: experience in airway and GI, • Other head and neck: TECA, BOAS, Thyroid, Salivary glands etc, • Echocardiography, • Joint injections, • Orthopaedic surgery: fracture repair & luxation procedures via bone plating, ex-fix, IM Pin TPLO, TTA, MPL techniques, • Official veterinarian status (strongly preferred) Personal qualities: You are capable of a wide variety of surgeries, but still enjoy all types of clinical work. Confident in diagnostics, medical case management and patient care, you have developed a strong reputation in your current clinic for reliability, expertise and good outcomes. • Passionate about delivering exceptional care to our patients., • Collaborative, you enjoy working with others in a supportive team environment. You listen to different perspectives and look to reach consensus and a way forward., • A problem solver: you discuss issues with others in a positive, constructive and empathetic way to find a solution., • A strong communicator, you understand the importance of keeping everyone updated and included in conversations., • The ability to multi-task, managing several demands simultaneously., • Flexible and adaptable (both in responding to last minute emergencies/ change of plans and understanding the pressure on others in such moments), • You think ahead to anticipate what the vets and patients need and organise the team to respond quickly and efficiently, • Kind & compassionate to pets, owners and colleagues alike, • Good humoured, you have a positive ‘can do’ outlook (and understand how important this is for the team culture) Hours & facilities: The role is mainly daytime working, but on occasion (eg: staff sickness, holidays or unavoidable emergencies) you may be required to cover out of hours patient care or emergencies. Work takes place in our purpose-built clinic on Chiswick High Road, Chiswick and in our purpose-built hospital on Wandsworth Bridge Road, Fulham. Wolfe Vets Facilities: • Two dedicated theatres with positive pressure ventilation, • Separate spacious dog and cat wards, • Three consult rooms, • A large central patient hub, • CT scanner, • Rigid endoscopy, bronchoscope, gastroscope, digital display, • Anaesthetic patient monitors including two capnographs, • Extensive surgical instrumentation including: AO kits, Hall drill, electrosurgery, • DR digital radiography, • Two ultrasound units (cart and portable) Benefits: • RCVS fees paid, • Cash contributions to routine medical care and treatments (e.g.: dental appointments, opticians etc), • Discounted pet food and veterinary services for own pets, • CPD funded (currently £3500 per annum and 5 paid days CPD each calendar year), • 25 days holiday plus bank holidays, • Loyalty scheme: Additional annual leave after two years of employment (increasing by a day a year to a maximum of 30 days per annum), • Birthday off- If it falls on a weekday, • Cyclescheme, • Paid overtime & TOIL, • Vet bonus scheme

Entity: Technology Job Family Group: IT&S Group Job Description: Our purpose is to deliver energy to the world, today and tomorrow. For over 100 years, bp has focused on discovering, developing, and producing oil and gas in the nations where we operate. We are one of the few companies globally that can provide governments and customers with an integrated energy offering. Delivering our strategy sustainably is fundamental to achieving our ambition to be a net zero company by 2050 or sooner. The role reports to a Technical Lead in London and will provide the development and support capability whilst being co-located with Traders, Schedulers/Operators, Exposure Analysts, Commodity Risk Analysts and Finance. ST&S is looking to derive competitive advantage and commercial differentiation from the use of technology in our trading and middle office activity. This position will be part of team building & supporting applications to provide that capability. We are looking for a Full Stack Software Engineer to supply, develop and maintain the digital products in our RPT Middle Office Technologies landscape. As a Staff Software Engineer, you will work closely with and provide leadership to other software engineers, product managers, ux designers and data engineers and our business partners. You will actively lead in feature development, performance enhancements and offer technical support to other teams. You will operate with a strong product approach and take end‑to‑end accountability for the platforms and services you own. • Design sophisticated backend components, services, platforms, and Restful APIs for seamless communication with the front end., • Continuously reviewing the services and components and seeking opportunities for improvements., • Design and implement scalable, resilient, and observable software solutions, • Identifying and addressing Tech Debt., • Influencing and delivering the product roadmap to improve our Key Performance Indicators and delivering tangible business value., • Developing the team’s Software Engineering skills., • Owning the team’s culture and ways of working, instilling a care for high quality code and tests and for implementing procedures., • Hands on development in Java and C#., • You will work closely with key business users and partners. Also, you will work directly with Tech Lead on the evolution of the current technology platform and the long-term strategy and roadmap., • This unique role is well positioned to create substantial value for the business and requires an individual with the right mix of software engineering and communication skills., • Use Claude Code to rapidly prototype features, refactor code, and generate unit tests for improved code quality, • Bachelor / master’s degree in computer science or equivalent experience, • Demonstrated ability in IT industry with experience in designing, planning, implementing, maintaining, and documenting solutions., • Have experience working with small teams of bright people., • Well versed in Software Engineering development techniques and protocols like TDD, BDD., • Strong Software Engineering Design capabilities and understanding of Computational Complexity., • Strive for excellence and continuous improvement in software architecture, software delivery and guidelines., • Strong experience in developing Cloud Native applications on different Platform as a Service solution (e.g. GKE, Openshift, AEKS, Cloud Foundry & etc), • Experience in reactive applications programming constructs and Domain Driven Design., • Proficiency in one or more Programming Languages such as Java, C Sharp, Scala, GO, Python, & etc., • Experience with large-scale messaging solutions such as Kafka, RabbitMQ, or ActiveMQ., • Database design and knowledge of PostgreSQL or My-SQL., • Experience in Trading systems or ETRMs (Energy Trading & Risk Management)., • Operational experience of running business critical systems., • Understanding concepts such Actor Models, Event Sourcing, CQRS etc., • Experience in leading a regional squad of engineers., • Strong system design and architectural skills Travel Requirement No travel is expected with this role Relocation Assistance: This role is not eligible for relocation Remote Type: This position is a hybrid of office/remote working Skills: Agility core practices, Agility core practices, API and platform design, Cloud Platforms, Collaboration, Communication, Configuration management and release, Continuous deployment and release, Creating a high performing team, Database Design, Digital Project Management, Documentation and knowledge sharing, Emerging technology monitoring, Facilitation, Information Security, Mentoring, Metrics definition and instrumentation, NoSql data modelling, Problem Solving, Relational Data Modelling, Risk Management, Scripting, Secure development, Service operations and resiliency, Software Design and Development {+ 7 more} Legal Disclaimer: We are an equal opportunity employer. We do not discriminate on the basis of protected characteristics like race, religion, color, sex, national origin, sexual orientation, veteran status or disability status. Individuals with an accessibility need may request an adjustment/accommodation related to bp’s recruiting process (e.g., accessing the job application, completing required assessments, participating in telephone screenings or interviews, etc.). If you would like to request an adjustment/accommodation related to the recruitment process, please _. If you are selected for a position and depending upon your role, your employment may be contingent upon adherence to local policy. This may include pre-placement drug screening, medical review of physical fitness for the role, and background checks.

Associate or Senior Associate – Building Physics London About us Hoare Lea is a human-centric and planet-conscious engineering consultancy. We offer intelligent and sustainable solutions to complex design challenges for the built environment throughout the UK and further afield. We provide a wide range of engineering and consultancy services, including acoustics, air quality, building services (MEP), fire, lighting, security and sustainability to name but a few. Together, our highly skilled teams use technical expertise and problem-solving skills to bring buildings to life. We ensure that whatever the building, its design is outstanding, and its operations meet the needs of the communities it serves. We are as committed to providing an environment where everyone can realise their unique potential. So, in joining Hoare Lea, you will experience a business that enriches your knowledge, supports your wellbeing, and welcomes your individuality. You’ll have the opportunity to participate in our 9-day fortnight scheme, thriving community groups, varied social and networking events, and extensive professional and technical development schemes. We also offer an extensive benefits package, including private medical cover, an electric vehicle salary sacrifice scheme, stock options, and 25 days of annual leave (increasing with service), alongside flexible and hybrid working. Whatever your ambitions or circumstances, our aim is to enable everyone to develop their knowledge, give their best, and enjoy what they do. About the role We’re hiring an Associate/Senior Associate to join our building‑physics team working on CFD, data‑centre thermal performance and whole‑building energy modelling. You will lead and deliver modelling studies, translate results into practical design and operational guidance, and help grow our technical capabilities and reproducible workflows across the team We are looking for an experienced, client‑facing engineer with hands‑on CFD and data‑centre modelling experience plus a strong grounding in building physics (heat transfer, ventilation/HVAC optimization, dispersion and wind‑microclimate analysis, and dynamic thermal modelling). You should be comfortable setting technical standards, leading projects, mentoring colleagues, and communicating results to clients and project teams. If you meet many of the criteria but not every bullet, we encourage you to apply. It's an exciting time to join our Building Physics team. Working alongside a range of specialist engineers and consultants, you will be joining a collaborative, knowledgeable, highly engaged team who love what they do, and offer a supportive, flexible, and high performing work culture. In this key and varied role, you can expect to: • Lead data‑hall CFD studies (rack‑ and room‑scale): containment and airflow strategies (hot/cold aisles, perforated‑tile & raised‑floor flows, fan walls, in‑row/rear‑door cooling, liquid‑cooling), transient resilience/time‑to‑critical analyses, hotspot mitigation, and assessment of re‑entrainment risks from plant equipment (generators, chillers)., • Oversee production CFD across sectors (Residential, Science & Research, Workplace): set meshing and solver standards, enforce convergence and QA/QC practices, and recommend higher‑fidelity approaches (e.g., LES) where justified., • Evaluate HVAC and ventilation strategies: model ventilation effectiveness and control strategies to improve thermal comfort, air distribution and energy performance., • Execute dispersion and wind‑microclimate studies: contaminant transport and tracer‑gas approaches, pedestrian wind comfort/safety assessments (Lawson criteria, City of London guidance), and interaction with site plant., • Integrate local CFD findings into whole‑building energy model., • Build and maintain automation and parametric workflows (Python; Rhino + Grasshopper/Ladybug/Honeybee), creating reusable components and batch‑run pipelines for scenario studies., • Define and implement model validation and uncertainty approaches: calibration, sensitivity analysis and reporting., • Provide technical leadership: review deliverables, mentor junior staff, support proposals and client presentations, and ensure projects are delivered on scope, schedule and budget., • A collaborative mindset, with the self-awareness and openness to work effectively within multi-disciplinary teams., • Support timely invoicing, debt chasing, management of WIP and forward workload/resource planning for your own projects., • Mentor and support our ‘next gen’ professionals including apprentices and graduates. About you To be successful in this role you’ll need: • BSc or MSc in Mechanical Engineering, Building Science, Thermal/Fluid Engineering, Physics, Mathematics, CFD or similar (or equivalent practical experience)., • Demonstrable CFD experience; data‑centre project experience is highly desirable., • Hands‑on experience with two or more CFD platforms (e.g., ANSYS Fluent/CFX, OpenFOAM, Star‑CCM+, Cadence DC) and meshing tools., • Practical experience in data‑centre thermal modelling (rack/room CFD, containment, transient resilience analyses)., • Experience into energy modelling tools like IES‑VE, TAS, EnergyPlus / OpenStudio)., • Automation skills: Python for scripting and data work; Rhino + Grasshopper and Ladybug/Honeybee for parametric workflows., • Strong communication and client‑facing skills; experience writing technical proposals and presenting to clients., • Ability to create clean, watertight geometry in Rhino, SpaceClaim or similar., • Commercial awareness and accountability, • A commitment to supporting the development of others Desirable: • Roles in data centre consulting and close collaboration with MEP teams., • Experience with LES and transient high‑fidelity studies for targeted investigations., • Familiarity with 1D flow network modelling for liquid‑cooling strategies., • Exposure to wind‑tunnel validation for CFD (boundary‑layer reproduction, instrumentation data processing, and CFD‑to‑experiment comparison)., • Professional registration (CIBSE or equivalent) or progressing toward registration. How to apply To apply simply complete a CV profile and submit your application, or for further information please contact louiescottodiperta@hoarelea.com . If shortlisted, one of our recruitment team will be in touch to arrange an introductory call (about 30 minutes) to discuss the role and your experience in more detail. From there, successful candidates will be invited to attend a panel interview, either via Microsoft Teams or in person at one of our offices. We aim to provide feedback at each stage of the process. Adjustments and accommodations If there are adjustments or accommodations that we can put in place to help you participate and give your best at any stage of the recruitment process (whether relating to disability, neurodivergence or anything else) please let us know. Data privacy We have updated our terms and conditions for candidates, click here to find out more. Recruitment agencies We have a Preferred Supplier List of trusted partners who assist us when required. We do not acknowledge speculative CVs or unsolicited candidate introductions from agencies not on the list. #LI-HYBRID

Senior Software Engineer – AI / Agentic Systems London (Hybrid) We’re partnering with a cutting-edge AI startup redefining how intelligent systems operate at scale. Their mission is ambitious: to push the boundaries of agentic AI and build platforms that automate complex, multi-step human workflows—unlocking entirely new levels of productivity. This is an opportunity to join early, work alongside world-class AI talent, and directly shape a platform sitting at the intersection of research and real-world deployment. The Opportunity As a Senior Software Engineer, you’ll play a key role in building and scaling an enterprise-grade AI platform. You’ll operate at the core of the product engineering function—designing systems that power autonomous agents, orchestrate workflows, and enable observability at scale. This is not just another backend role. You’ll influence architecture, mentor engineers, and help define the technical direction of a rapidly growing AI company. What You’ll Be Doing • Own and drive system architecture and long-term technical strategy, • Build high-performance, scalable backend systems powering AI-driven workflows, • Lead design and code reviews, ensuring high standards of quality and security, • Collaborate closely with AI research, product, and infrastructure teams, • Improve system reliability, observability, and scalability, • Mentor engineers and act as a technical multiplier across teams, • Champion best practices, tooling, and engineering excellence, • Proactively identify and resolve technical debt What they are Looking For Core Experience • 5+ years in backend engineering, ideally at Senior level, • Strong experience with Python and/or Golang, • Proven track record building and scaling distributed systems or cloud-native platforms (AWS preferred), • Experience delivering end-to-end solutions in production environments Technical Skills • API development (REST / GraphQL) and third-party integrations, • Strong knowledge of databases (SQL & NoSQL), • Experience with event-driven systems / messaging (Kafka, RabbitMQ, SQS, etc.), • Solid understanding of system design, architecture patterns, and testing frameworks, • Hands-on experience with monitoring, observability, and instrumentation Leadership & Impact • Strong mentoring capability—raising the bar across teams, • Ability to communicate across technical and business stakeholders, • Confident leading complex technical decisions with long-term vision Working Model • Hybrid: 3 days per week onsite (London), • Occasional travel between offices (every 4–6 weeks) Why This Role? • Join one of the most exciting AI startups in Europe, • Work on agentic AI systems at real scale—not just theory, • Collaborate with top-tier engineers and researchers, • Significant ownership and influence from day one, • Strong compensation + rapid career growth opportunities

UBY is a Constructech subsidiary of the Bouygues Group which uses the best of technology and Data to provide simple and unique smart solutions that meet the environmental, health, safety, productivity and sustainability challenges of construction players and infrastructure managers. By deploying its specialized sensors, software and algorithms, UBY offers environmental, structural, productivity and occupational health and safety monitoring in the construction and operation phases. UBY positions itself as a Constructech expert and co-pilot for operations managers, to enable them to manage their projects with the right information, at the right time to make the right decisions. UBY is convinced that Technology is an ally for more secure and sustainable constructions. More information on https://uby-group.com/a-propos/ About the Role We are looking for a motivated Instrumentation & Monitoring Technician to support our growing activities across major environmental and infrastructure projects. Under the supervision of our I&M Project Manager, you will install, maintain, and decommission a range of environmental monitoring instruments used to assess ground conditions, water and air quality, structural behaviour, and other key environmental parameters. You will operate on various worksites across the region, particularly on large public works and environmental monitoring programmes. After receiving full training on our tools, systems, and digital platforms, you will be responsible for deploying our dedicated monitoring solutions on construction and infrastructure sites. This hands-on role is ideal for someone who enjoys field work, has strong practical and problem-solving skills, and is eager to work with modern environmental and IoT monitoring technologies. Responsibilities & Duties Office-based activities • Prepare materials, equipment, and documentation required for environmental instrumentation installations., • Review project drawings, specifications, and method statements prior to mobilisation. Site-based activities • Install and uninstall environmental monitoring equipment—such as groundwater sensors, vibration and noise monitors, air quality devices, and settlement or movement sensors—according to specifications and safe working procedures., • Install, configure, and commission data loggers, telemetry units, and remote monitoring solutions., • Maintain accurate installation records, ITPs, and site reports., • Supervise subcontractors when monitoring activities are outsourced., • Take manual readings and perform verification checks on instruments., • Provide technical support for environmental and structural monitoring systems during operation., • Perform routine maintenance and installations, including work at height, in confined spaces, or during night shifts when required., • Uphold strong health, safety, and quality standards during all site operations. Profile & Skills You will be a great fit if you have: • Experience related to the installation or maintenance of environmental and/or monitoring instruments (e.g., groundwater sensors, vibration monitors, noise monitors, data loggers, telemetry systems, settlement devices, etc.)., • Experience working with or supervising drilling or instrumentation subcontractors (a plus)., • A practical, hands-on approach and confidence using electromechanical tools., • Curiosity, attention to detail, and strong self-motivation., • The ability to work effectively as part of a team in an international and multicultural environment., • Interest in technology, IoT devices, sensors, and the digitalisation of environmental and construction monitoring., • Good adaptability and problem-solving skills in field environments.

Redline has been retained by a leading instrumentation manufacturer who are looking for a Electronics Design Engineer to join their R&D team based in Surrey.Qualifications, skills, and all relevant experience needed for this role can be found in the full description below.Due to significant grow

SCADA and instrumentation systems design- data acquisition, control and monitoring systems for power generation, systems integration, some HYBRID working, huge potential for growth in engineer led company.

Apply now, read the job details by scrolling down Double check you have the necessary skills before sending an application.Right across infrastructure, theres a requirement to not only maintain, but also renew and reimagine.Whatever stage youre at in your career, with us youll have an opportunity to

Electrical & Instrumentation Supervisor. Job Role of the Electrical & Instrumentation Supervisor. An exciting opportunity has become available for an experienced Electrical & Instrumentation xrnqpay Supervisor to work for a blue-chip industrial manufacturing company within the heavy indu

Strong experience in electronic hardware design within control or instrumentation environments Experience working in a similar senior or design-focused role Strong problem-solving ability and attention to detail Digital circuit design including. Senior Electronics Hardware Design Engineer. Key Respo

Pioneer Selection Ltd is looking for an Electrical & Instrumentation Supervisor in Erith. Candidates should have significant electrical and instrumentation maintenance experience, be NVQ Level 3 qualified, and possess strong fault-finding skills.

Anton Paar Ltd, a leader in laboratory instrumentation and services, is seeking a Field Service Engineer to join our successful and highly motivated team. HNC (or higher) in an Engineering discipline – Electronics preferred. Proven field service experience working on complex analytical instrumenta

ADM in Erith is seeking an experienced Electrical Engineer to lead the electrical team in a dynamic environment.Responsibilities include planning work schedules, supervising technicians, and ensuring compliance with electrical standards.The ideal candidate will have a City & Guilds or HNC in Electri

ELECTRICAL & INSTRUMENTATION SUPERVISOR. Job Title: Electrical & Instrumentation Supervisor | Location: Erith | Salary: £60,000 - £65,000 | Shift: M-F Days. An exciting opportunity to lead and support the site maintenance programme, supervising electrical and instrumentation maintenance activities

Waters Global Research department is looking for an energetic and creative machine learning engineer to join the team and help bring technologies in analytical instrumentation to the forefront of the industry. The new hire will contribute to the next generation of innovations in intelligent instrume

As a Calibration Engineer, you will be responsible for the calibration, maintenance, and repair of a wide range of instrumentation and measurement equipment. Working within a fast-paced engineering environment, you will ensure all equipment meets strict quality and compliance standa.

A leading life science company based in the United Kingdom is looking for a dedicated Field Service Engineer.This role involves repairing customer instruments and ensuring optimal support.Applicants should possess a Diploma in Electronic Engineering and experience in a customer-facing role.Key respo

Are you a Field Service Engineer with an Oil & Gas or Instrumentation background looking for a role offering full job training on a bespoke product range, along with a clear route into leadership?. This role would suit a Service Engineer with an Electrical or Instrumentation background who is lookin

As a Calibration Engineer, you will be responsible for the calibration, maintenance, and repair of a wide range of instrumentation and measurement equipment. Working within a fast-paced engineering environment, you will ensure all equipment meets strict quality and compliance standa.

Rise Technical Recruitment Limited is looking for a Field Service Engineer (Instrumentation) based in Richmond, England. Candidates with an Electrical or Instrumentation background are encouraged to apply.

Support and oversee the site’s electrical and instrumentation compliance. Deputise for the Electrical and Instrumentation Superintendent, specifically relating to:. The role involves planning work schedules, supervising technicians and contractors, reviewing progress, and ensuring compliance with

Product R&D Engineer - Electronics, Electrical & Software - Medical Devices. Instrumentation Engineer (Gas Detection / Electronics). Senior Electrical / Electronics Engineer.

This initial 12-month contract offers opportunities for extension, appealing to those at a mid-senior level in Information Technology. A large global organisation is seeking a Lab Engineer to provide on-site support for laboratory systems in Greater London. Candidates should have experience with lab

Electrical & Instrumentation (E&I). Lead Electrical and Instrumentation Engineer - Guinea, West Africa. Lead Engineer (Electrical & Instrumentation) - Guinea, West Africa.

A leading engineering firm is seeking an experienced Lead Electrical and Instrumentation Engineer to oversee projects in West Africa.The role requires 15+ years in electrical and instrumentation engineering, with a focus on mega projects.Strong leadership, problem-solving skills, and proficiency in

Brightsmith is collaborating with an innovative Hydrogen company to find a skilled engineer for designing and implementing electrical, instrumentation, and control systems for a pilot plant. The ideal candidate will have over 5 years of experience in the field, particularly in chemical or industrial

Lab Engineer – Lab Instrumentation, Linux, OS, IOS, Microsoft, Windows, Remedy, Empower – On-site London, UK. A large global organisation are in search of Lab Engineers to provide PC workstation, laptop and printer hardware support for laboratory related hardware and software. Configure, install

RF Engineer (Contract) – London We’re supporting a technology organisation developing advanced electronic sensing and measurement systems. They are seeking an RF Engineer on a contract basis to support the design and validation of high-performance analogue and RF hardware. Key responsibilities: RF / high-frequency analogue circuit and PCB design Low-noise analogue front-end development Integration of RF hardware into complex instrumentation systems Lab testing, RF measurement, and debugging EMC/EMI and signal integrity considerationsRequirements: Strong RF / microwave or high-frequency analogue design experience Hands-on RF PCB design and product development background Experience with RF simulation tools (ADS, HFSS, CST or equivalent) Strong lab and troubleshooting capabilityDesirable: Experience in medical devices, scientific instrumentation, or sensing systems Low-noise or high-sensitivity measurement systems Embedded systems exposureLondon (hybrid) Contract: £70–£80+ per hour (depending on experience) Duration: 4 months+ Please contact Toby (url removed) (phone number removed)

My Client is recruiting for a Senior/Electrical Design Engineer in the Water Sector Location: Central London Office and Sites (ideally south London or Surrey area for easy access to Office and sites) Working hours - Mon to Fri 47.5 hours Experience within the water/wastewater or similar process related industry and, ideally degree qualified in Electrical Engineering. The Senior Electrical Engineer will play a key part in the team and will be involved in projects within the water/wastewater industry from tender to project handover. Working on projects including Digester refurbishments. Key Responsibilities: Preparation of equipment submissions Liaise with suppliers on product selection and procurement Carry out project electrical design from initial concept through to detail design, including generation of Control Philosophies, Load Schedules, ESB applications and Instrumentation equipment listings. Review design deliverables to ensure projects targets are being achieved Assist in the production and review of P&ID and General Arrangement Drawings Provide Engineering support to senior design staff and project delivery teams Support Junior Engineers Qualifications and experience: Ideally degree/HNC/HND in Electrical Engineering ATEX / CompEx - training/experience Experience within the water/wastewater Electrical Design experience Experience with Digesters High attention to detail Safety aware Commercially aware MS Office Skills

Your new company Hays have been exclusively retained by an innovative, growing biotech in London to hire an experienced Lead Automation Engineer into their R&D team. You'll work within a multidisciplinary team of scientists, engineers, and data specialists, contributing to the development of cutting‑edge translational research platforms as the company builds its capacity. Your new role As a Senior/Lead Automation Engineer, you will take technical ownership of laboratory automation systems, focusing on the optimisation and reliability of liquid handling platforms and automated workflows as the company continues to automate a number of its processes. Key responsibilities include: Owning the performance, maintenance, and reliability of laboratory automation systems, particularly liquid handling platforms Operating, troubleshooting, and optimising robotic systems (e.g. Hamilton, Tecan, Opentrons) Acting as the primary escalation point for automation failures, instrument errors, and workflow interruptions Translating manual and semi‑automated processes into robust, scalable automated workflows to support R&D operations Supporting commissioning, validation, and integration of new automation platforms Collaborating cross‑functionally with scientists, software engineers, and data teams to improve workflow efficiency Writing and maintaining SOPs, technical documentation, and troubleshooting guides Driving continuous improvements in throughput, reproducibility, and operational efficiency Coordinating vendor support, servicing, and upgrades This is a permanent, lab based role at the company's site in London. What you'll need to succeed A strong candidate will bring hands‑on engineering expertise and experience improving laboratory automation systems.You should be excited by the challenges involved in bringing in new equipment and solving problems within R&D workflows and have: Strong experience with laboratory automation, gained in a biotech, pharma, contract research organisation, or a similar environment Hands‑on expertise working with liquid handling robots (e.g. Hamilton, Tecan, Opentrons) beyond routine operation Proven ability to troubleshoot issues (eg mechanical, fluidic, software) Experience developing, optimising, or scaling automated workflows Familiarity with LIMS/ELN and lab data workflows Strong communication skills and ability to work across multidisciplinary teams Interest in improving R&D efficiency through automation and process engineering The right to work in the UK (no sponsorship is available) Nice to haves, but not essential are: Experience with flow cytometry or single‑cell genomics automation The ability to modify automation scripts, instrument methods, or vendor software protocols, but there is an established software team for this What you'll get in return You'll be taking the lead for the company's automation as they continue to build this capacity and transfer their processes from manual to semi-automated and fully-automated; as well as solving hands-on problems you'll also be feeding into the company's automation strategy and working directly with C-suite and other senior stakeholders. You'll also get a generous salary, bonus and benefits package and a great working environment with a dedicated and friendly team. What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. Keywords: Lead, Senior, Automation, Engineer, Laboratory, Robotics, Liquid, Handling, Scientist, Research, Pharmaceutical, Biotech, Workflow, Optimisation, Throughput, Systems, Engineering, Hamilton, Tecan, Opentrons, LIMS, ELN, Integration, Troubleshooting, Validation, Maintenance, Instrumentation, Software, Data, Efficiency, Process, Platforms, Scalability

Test and Validation Engineer Certain Advantage are hiring for a Test and Validation Engineer based in Stamford (5 days per week), with occasional travel to Nottingham on a 12 month contract basis. We are working with a reputable global organisation that designs and manufactures engines, power systems, and related technologies across automotive, industrial, and energy sectors. Your responsibilities: Manage daily test cell activities for Powertrain (PE + MG) systems, including test setup, execution, and data collection. Execute test requests and develop test procedures for electrical validation of the powertrain system. Work closely with the Power Electronics and Motor design teams to define validation requirements and test plans. Investigate and resolve system or component issues, identify causal mechanisms for failures, recommend corrective actions, and own problem resolution to closure Close the loop between design/simulation data and physical test results through post-processing and analysis using tools such as MATLAB and Ansys. Generate high-quality technical reports and review presentations. Support test facility setup, instrumentation, data acquisition systems, and troubleshooting. Manage spare parts readiness and coordinate hardware changes in collaboration with component owners and the materials team. Utilise structured problem-solving methods (e.g., Fault Tree Analysis) and work with subject matter experts as required. The individual: Prior experience working in a powertrain or electrical testing environment (Power Electronics + Motor/Generator experience) Hands-on experience with component validation, failure analysis, and issue resolution. Proficiency in using data acquisition systems, data processing, and analysis. Automotive or heavy-duty industry experience is preferred Demonstrated ability to interpret test requirements, set up instrumentation, and ensure high-quality test data. Does this sound like your next career move? Apply today. Working with Certain Advantage We go the extra mile to find the best people for the job. If you’re hunting for a role where you can make an impact and grow your career, we’ll work with you to find it. We work with businesses across the UK to find the best people in Finance, Marketing, IT and Engineering. If this job isn’t for you, head to (url removed) and register for job alerts and career guidance tips

Role - Mechanical Engineer Salary - £40,000 - £45,000 per annum (dependent on experience) Type - Permanent Location – North London My client is a specialist engineering company supporting projects across high-integrity and safety-critical sectors. They are looking for a Mechanical Engineer to join their team in North London on a permanent basis. The Mechanical Engineer will ideally have the following attributes: BSc / BEng qualified in Mechanical Engineering / Manufacture or similar 2 – 5 years’ or more of industry experience working in similar Mechanical Design Engineer role working on design for manufacture Knowledge of manufacturing processes and instrumentation Excellent knowledge and proficiency with SolidWorks CAD / Creo Elements / Parametric software ideally Be self-motivated with excellent attention to detail Have excellent communication skills both verbal and writtenThe Mechanical Engineer role will involve: Supporting delivery and development of both new and existing products in the R&D team Providing technical support Enhancing and maintaining the mechanical aspects of existing products to meet business requirements Being involved in developing detailed mechanical designs using SolidWorks and the associated documentation Liaising with colleagues and suppliers to ensure projects are delivered on-time and within budget Carrying out post-production design changes Managing a variety of projects Assisting colleagues with any engineering or manufacturing issues that may arise Collaborating with internal teams and stakeholders to ensure successful project delivery Occasionally travelling within the UK to support project and business needsIf you are interested in this position, please apply with an up to date CV as soon as possible, along with your availability and your salary expectation

Exciting opportunity to join an innovative, industry leading laboratory equipment manufacturer and distributor. Our client is a leading provider of analytical instruments in the UK with products ranging from sample preparation systems to elemental analysis instrumentation. This opportunity calls for an ambitious scientist looking to drive sales whilst providing excellent service to customers. Within this role, you will support customers by identifying their key pain points and advising which products in your portfolio would best serve their requirements. Your position will focus on managing existing accounts and identifying new customers in academic, CRO, biotech and pharma laboratories. You will be based remotely and are expected to travel ~60% of your time to customer sites across the Southeast for instrument demonstrations, presentations and negotiation. To be considered for this position you will have: • BSc minimum in Chemistry or related subject, • Eligibility to work in the UK without sponsorship, • UK driver’s license and willingness to travel, • Proven experience within scientific sales and understanding of the sales process is highly desirable For your work you will be provided with a competitive basic salary, commission scheme, car and additional employee benefits. Please apply below to receive more details! Keywords: chemistry equipment, laboratory equipment, consumables sales, capital sales, business development, account management, sales, sales executive, technical sales, technical sales specialist, London, Cambridge, Oxford, Kent, Leicester, Northampton, Ipswich, St. Albans, Luton, Watford, VRS9389PC Please note that by submitting your application to VRS Ltd your details will be registered with us so that we can contact you about suitable job opportunities now and in future. You may unsubscribe at any time by emailing us directly via our website

GBR Recruitment are working exclusively with a leading Asphalt & Cement Plant Machinery installation company, recruiting for a field based Electrical Service Engineer to carry out Electrical Engineering works on UK & Ireland customers Asphalt & Cement manufacturing sites. Travelling UK wide & over into Ireland, you will carry out Electrical fault finding & diagnostics services, repairs, commissioning of new machinery & the retrofitting of any new machinery / production lines within a Heavy Plant environment (Fixed Heavy Plant Machinery, not mobile). In this key Service Engineers role, you will have strong rounded Electrical skills, including strong knowledge & experience of Electrical Control Panels / Electrical Control Systems, plus some PLC skills (Siemens, Allen Bradley, Mitsubishi). You will have had previous exposure to some form of Fixed Heavy Plant Machinery within Asphalt, Cement, Recycling, Biomass, Power Generation or similar Industrial Plant Machinery, working on various machinery such as Electrical Control Panel Systems, Coal Burners, Gas Burners, Oil Burners, Boilers, Drum Dryers, Dust Collectors, Elevators, Vibrating Screens, Fillers, Weighers, Mixers, Storage, Bitumen Supply Systems, Crushers, Pre-Heaters, Kilns, Proportioning Equipment, Grinding Mills, Silo’s, Coolers, Conveyor Systems & more. This role will require the suitable applicant to be away from home most of the week or all the week (up to 5 days, Monday to Friday) so you must be prepared to travel to different customers sites up & down the country, plus over into Ireland. Duties: • Aftersales Service Engineering (Electrical) duties on Asphalt & Cement works, electrical installation, including fault finding, diagnostics, technical advice & guidance, repairs, commissioning of new machinery & new lines, plus retrofitting new machinery / parts., • Working across a vast array of Asphalt & Cement works Plant Machinery (fixed) across both the UK & Ireland, • Working on Electrical Control Panels & Electrical Control Systems, • Working on PLC's, • Consultative approach with all clients on their sites (Plant Directors, Managers etc.)., • Reading Electrical Technical Drawings., • Working on HV & LV., • Calibrating pressure, temperature, level, weighing, instrumentation & analytical equipment., • Inspection & Testing of Electrical Machinery / Parts & Components., • Some Mechanical Engineering tasks. Experience / Attributes Required: • Electrical Engineering Professional (time served apprenticeship / HNC qualifications or other)., • 18th Edition IET Reg's, • Asphalt &/or Cement Plant Machinery experience or similar High Capital Heavy Plant Machinery such as Recycling, Biomass, Power Generation etc. (fixed plant / heavy plant machinery)., • PLC experience, • Automated machinery experience, • Electrical Control Systems experience, • Gas & Oil Burners experience, • Boiler experience, • Fault finding, diagnosing, commissioning & retrofit experience, • HV & LV experience, • Happy to work away from home most days across Monday to Friday & to travel the UK / Ireland (this is a must) Fantastic Benefits including £600 per month stay out from home bonus on top of the advertised salary above (£7.2K p/a extra), Company Van, Enhanced Overtime Rates (x1.5 rate in M-F, x2 Weekends), 7% discretionary bonus, Health Insurance Scheme, 33 days annual holiday & more. If you are an Electrical Engineer, Multi-Skilled Engineer, Electrician, Maintenance Engineer, Shift Engineer, Manufacturing Engineer, Project Engineer or similar then this could be a great opportunity for you, working within a highly progressive business. Immediate start available. & fantastic earning potential

A leading chemical manufacturing company is seeking a Maintenance Manager based near Croydon. The role offers a competitive salary of £65,000 per annum, with company pension, annual leave, and ongoing training and development opportunities. Manage the maintenance of the plant and buildings at the Mitcham facility, utilising the CMMS. Administer and maintain this system and associated records, ensuring all plant equipment is kept in a safe and operable condition with minimum downtime, making best use of internal resources and minimising contractor and consultant use. The role will also be responsible for managing maintenance and capital budgets. Key Responsibilities: Manage and maintain the CMMS, ensuring accurate records and effective preventative maintenance across all plant and equipment. Ensure all plant and utilities are maintained in a safe and compliant condition to minimise downtime and maximise operational efficiency. Maintain all regulatory and internal compliance standards, including statutory inspections and site engineering standards. Ensure all maintenance activities are carried out safely, with strict adherence to EHS procedures and the aim of zero accidents. Manage maintenance purchasing, spares, and inventory within agreed budget constraints. Lead capital projects including planning, CEAR submissions, execution, cost control, and project close-out. Oversee site utilities including boilers, thermal oil systems, compressors, nitrogen systems, cooling systems, incineration systems, and associated site services. Act as PI administrator, ensuring plant documentation including P&IDs, electrical drawings, and equipment files are accurate and up to date.Candidate Requirements: Degree level qualification in Chemical, Electrical or Mechanical Engineering, or minimum 5 years' experience in a chemical or manufacturing engineering environment. Strong experience in chemical plant maintenance and mechanical engineering systems. Knowledge of instrumentation, PLCs, and HMI systems. Experience managing maintenance budgets and capital projects.Apply directly for this Maintenance Manager role in Mitcham or contact Sean Turner on (phone number removed) to discuss further

Trainee Calibration Engineer £28,000 (£35,000 OTE) + Full Training + Progression + Overtime Van / Fuel Card + Benefits 6 month Fixed Term Contract (Permanent extension) Bristol (Commutable from: Swindon, Oxford, Cheltenham, Banbury, Reading, Gloucester and surrounding areas) Do you have Telecommunications, IT or Calibration experience looking to join a national-leading business who supply specialist equipment to the likes of Medical and Pharmaceutical clients for which you will receive full training? This is a great opportunity to get on board with a growing UK company, in a fixed term contract (with extension), where you will have a huge earning potential through progression and enhanced benefits. This company manufacture and distribute state of the art Laboratory equipment into a range of sectors. Due to their expertise across both Hardware and Software they are dominating their market. This is a Monday - Friday days based role covering multiple sites, predominately within Bristol and Wiltshire. You will perform Calibration, Testing, and Installation of a range of IT and Electronic equipment. This role would suit a Calibration / IT / Telecommunications Engineer who is looking for full training and technical progression. The Role: • Servicing and Calibrating Medical equipment. Working on IT, Electronics and Instrumentation. Monday - Fridays (days based). The Candidate: • Looking for a Field role - based in Bristol area. Telecommunications, IT, Electronics background welcomed. Hands on experience. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates

Technical Sales Engineer (High Tech Capital Equipment) North London & surrounding areas £60,000 - £70,000 + Bonus + Car/Car Allowance + Excellent Company Benefits Are you a Sales Engineer with experience of selling of high value/high technology capital equipment looking to make a real commercial impact? On offer is a fantastic opportunity to join a market-leading organisation at the forefront of scientific instrumentation and capital equipment, trusted by customers across global manufacturing, R&D, and advanced materials sectors. In this role, you'll take full ownership of a thriving UK territory, building long-term customer partnerships, delivering tailored technical demonstrations, and providing innovative solutions to complex engineering challenges. You will be joining a globally respected company renowned for engineering excellence, customer focus, and continuous innovation where your sales skills will be put to the test and rewarded with the generous bonus structure. This position would suit a Technical Sales Engineer with capital equipment experience looking for a new challenge within a lucrative patch The Role: Manging sales cycle from lead generation to closing sales Strong technical focus Development of strategic sales plan for territory The Candidate: Background in high-technology capital equipment sales Proactive in new business development Consultative sales approachReference Number: BBBH(phone number removed) To apply for this role or to be considered for further roles, please click "Apply Now" or contact Patrick Simper at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates

Midlands & South UK Territory Competitive Basic + Uncapped Bonus + Hybrid Company Car + Private Medical A leading international engineering business is looking to recruit a Area Sales Engineer to manage and grow a well-established territory covering the Midlands and South of the UK. This is an excellent opportunity for someone with experience in technical sales, test & measurement, materials testing, instrumentation, laboratory equipment, metrology, or wider engineered capital equipment sales to join a highly respected and growing organisation. The company supplies specialist testing and measurement solutions into industries including aerospace, defence, medical devices, pharmaceuticals, packaging, electronics, advanced manufacturing, and research environments. This is a consultative technical sales role involving a mixture of account management, customer development, technical demonstrations, and new business generation. The Role As an Area Sales Engineer, you will be responsible for: • Managing and developing existing customer accounts across the South UK territory, • Identifying and winning new business opportunities, • Conducting customer visits, technical discussions, and product demonstrations, • Advising customers on appropriate testing and measurement solutions for their applications, • Managing the full sales cycle from enquiry through to quotation, negotiation, and close, • Maintaining pipeline activity, forecasts, and CRM records, • Working closely with internal applications, service, and support teams Products and solutions include areas such as: • Materials testing, • Force and torque testing, • Tensile and compression testing, • Packaging and product testing, • Laboratory and quality control systems, • Physical properties testing equipment What We’re Looking For We are keen to speak with candidates from backgrounds such as:Technical Sales Engineer, Area Sales Manager, Field Sales Engineer, Business Development Manager, Technical Account Manager Experience selling any of the following would be highly advantageous: Test & measurement equipment Materials testing systems Laboratory equipment Metrology equipment Instrumentation Capital equipment A consultative sales approach and strong technical credibility are essential. Package • Competitve basic salary, • Uncapped bonus structure, • Hybrid company car, • Private medical, • 25 days holiday + bank holidays, • Pension, • Hybrid working environment, • Strong long-term career prospects Additional Information • Territory: South of Birmingham, • Travel: Approximately 60%+, • Hybrid role with occasional office attendance This is a fantastic opportunity to join a global engineering business operating within a highly technical and specialist market with strong long-term growth potential

Kantor Energy are currently recruiting for a Senior Electrical Engineer to work on various Kantor projects, based in the Kantor/Dornan London Office. Kantor is a specialist engineering contractor, that has been designing and building innovative and sustainable energy systems for clients across the UK and Ireland for over 12 years. We are a wholly owned subsidiary of the Dornan Engineering Group. Dornan are a leading Mechanical, Electrical and Instrumentation contractor with over £600m annual turnover and with projects in Ireland, Mainland Europe, the Nordics and the UK. You will join a hard-working, ambitious, innovative team and you will benefit from a supportive culture, where your ideas and contributions will be recognised. Roles and responsibilities: Concept design, detailed design and project delivery electrical engineering across a range of scales and types of heat network projects around the UK, with a focus on the London area. Engagement with supply chain during both initial procurement and delivery phases to ensure optimal product selection and delivery. Act as lead electrical engineer on a number of live projects, working directly under the Project Lead Engineer. Primarily site-based role (most sites based in London, with some potential for site attendance outside of London also), with time also spent in the Kantor/Dornan London office, as need dictates. Review, analysis and reporting on project performance. Experience/Qualifications Required: Level 8 / Honours Bachelor's Degree in Electrical Engineering Min 5 years' experience in an electrical engineering role, preferably within the energy sector Flexible and enthusiastic approach, with a willingness to take on novel challenges Good understanding of LV power systems for industrial, commercial and multi-residential facilities and in particular transformers, main distribution boards, sub-distribution boards, cabling and containment systems, PFC units and UPS systems. Capability (and ideally experience) in cable sizing calculation software, e.g. Amtech. Proficiency in MS Office suite, in particular MS Excel and MS Word Some experience preferable in use of computer drawing software, e.g. AutoCAD, Revit, Solidworks Desire to experience full project engineering lifecycle, from early concept design through to construction, commissioning and operation Willingness to engage and collaborate with a wide range of multi-disciplinary counterparties Why Kantor? Kantor's mission is to deliver novel and innovative solutions within the distributed energy sector, with a focus on sustainable and low-carbon projects. You will be contributing to this important enterprise, at a time of high projected growth throughout the energy sector. Kantor is a small and tight-knit team. We pride ourselves on fostering a family feel and a down to earth team. You will thus be working with a diverse multi-disciplinary team of engineers, with direct exposure to senior management and decision makers. As part of a small team, you will take on responsibility and have an opportunity to deliver real value from the outset. As part of the wider Dornan Group, Kantor also benefits from the advantages of a large, well established organisation: Kantor/Dornan offers ongoing educational assistance and promotes CPD, including supporting its engineers on their journey towards Chartership. Kantor/Dornan promotes collaboration through various team building, social and charity events. Kantor/Dornan are committed to employee wellbeing with our Employee Assistance Programme and an in-house Health & Wellbeing advisor. Please contact Sean Hitchman on / (phone number removed) #LI-SH1 We are committed to creating an inclusive environment where people from all backgrounds feel valued and supported. Diversity in thought, culture and experience strengthens our teams and our projects

Service Engineer Earn great money working as a Controls, Electronic or Electrical Service Engineer to install, commission, fault find and repair instrumentation, PLC control and automation systems for the marine industry. Field based but commutable to Bristol, Liverpool, Newcastle or Maldon in Essex, we offer an excellent basic salary, lots of overtime and great earning potential for an Engineer who is happy to stay away across the UK on one to two week projects at a time. SALARY: Up to £65,000 BENEFITS: · Overtime on all work over 37 hours (with premium for weekend / bank holidays) · Company vehicle · Annual bonus · Holiday allowance which increases with overtime · Private healthcare · Pension. LOCATION: Bristol, Newcastle upon Tyne, Liverpool or Maldon (Essex) COMMUTABLE LOCATIONS: Bath, Cheltenham, Gloucester, Weston Super Mare, Sunderland, Middlesbrough, Darlington, Warrington, Manchester, Chester, Chelmsford, Basildon, Colchester, Braintree, Bishop's Stortford, Dartford, Dagenham, Harlow, Haverhill, Southend on Sea WHY SHOULD I APPLY? · This is a growth position with a profitable and developing company. Now is a great time to join us! · Our generous overtime means you can earn an excellent salary. · Planned work! You'll know where you'll be, when, and for how long. Take control of your life and schedule. · Be part of a team of experts and become an expert yourself in a niche field. JOB SPECIFICATION: Electrical Engineer, Electronic Service Engineer : Instrumentation, PLC Control and Automation Systems - Marine Industry This is a field based Electronic / Electrical Service Engineer vacancy for a very well established and respected specialist in instrumentation, PLC control and automation systems to the marine industry. This role will be split between (80%) scheduled electrical / electronic installation, commissioning and refit projects - typically staying away for 10-14 days at sites across the UK. The remainder (20%) will be reactionary fault finding and repair (1-2 day trips) on first and third party Instrumentation, PLC controls and automation equipment or machinery. The majority of work will be in the UK, though you will work on international projects - perhaps 6 weeks per year and including trips to Australia, Dubai and the USA. REQUIREMENTS: Electrical / Electronic Service Engineer : Instrumentation, PLC Control and Automation Systems • Marine Industry We require a practical, hands on Engineer with a track record as an electronic or electrical Service / Maintenance Engineer in an industrial setting. A good, practical grasp of electronic engineering is required. Any experience of instrumentation and / or understanding of PLC control systems would be an advantage. You must be prepared to travel and stay away as required. THE COMPANY: We are a well established and recognised company - specialising in a niche field of Instrumentation, PLC Control and Automation Systems to the Marine Industry - with an excellent reputation. This role has come about as a result of our continued growth and development. PROSPECTS: Excellent earning potential in this role. We also have a track record of promoting from within where possible. It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Service Engineer, Maintenance Engineer, Electronic Engineer, Electrical Engineer, Process Engineer, Installation Engineer, Commissioning Engineer, Fault Finding Engineer, Repair Engineer, Applications Engineer, Project Engineer, Project Manager - Electrical, Electronic, Instrumentation, PLC Control Systems, Automation Systems, Marine Industry, Industrial Engineering, Automation, PLC Engineer, Rockwell, Mitsubishi, Siemens, Omron. Please Note - We have been selected as the exclusive retained partner for this role so any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: SP8495, Wallace Hind Selection

Our client is a global leader in scientific technology, providing chromatography solutions to customers across the petrochemical, energy, pharmaceutical, and environmental sectors. As part of their continued growth, we’re seeking an experienced Account Manager to join their team. As an Account Manager, you'll act as a trusted advisor to scientific clients across the UK & Ireland, understanding the scientific goals of your customers and tailoring solutions that support their workflows. You’ll engage with a mix of existing accounts and new prospects, supported by an established brand and product reputation. This role suits a salesperson who is driven, and naturally comfortable engaging with technical stakeholders. You should enjoy asking questions, understanding challenges, and recommending meaningful solutions, take pride in your work and value relationships built on trust, not just transactions. To be considered for this role you will have: • Proven Scientific instrument sales experience, ideally with strong technical experience of relevant techniques (Chromatography preferred), • Account management experience and the ability to identify and convert new business opportunities, • Excellent communication skills and the ability to engage with senior technical and commercial stakeholders, • Experience working towards and achieving targets, • UK Drivers Licence and the willingness to travel, • Right to work in the UK without sponsorship The role offers a competitive basic salary, plus uncapped commission with realistic OTE of 20% on top. Additional perks include a company car or allowance, private healthcare, pension, and strong learning and development resources. Sound like a good fit? Send your CV or drop us a message to learn more. We’re happy to talk through the details and see if this could be the right next step in your career. Keywords: account management, sales manager, sales lead, business development manager, business development, sales representative, sales specialist, scientific sales, scientific sales representative, account executive, mass spectrometry, chromatography, LC-MS, GC-MS, capital instrumentation, reagents, software, consumables, UK, Ireland, Scotland, Wales, Manchester, London, Birmingham, Edinburgh, Liverpool, Leeds, Cambridge, Oxford, Glasgow, VRS9393PC

Are you an experienced Electrical Technician, an Electrical Engineer or an Electrician who now wants to work for a reputable and stable business with an excellent work-life balance? We offer an environment where experience and knowledge is valued. Based at our site in Watford, you will be a vital part of the service department providing calibration on electrical devices. BASIC SALARY: Up to £32,000 BENEFITS: · Holidays rising to 30 days on service plus Bank Holidays · Pension · Flexitime LOCATION: Watford, Hertfordshire COMMUTABLE LOCATIONS: Hemel Hempstead, St. Albans, Hatfield, Harrow, Wembley, Hayes, High Wycombe, Luton, Dunstable, Hatfield, Welwyn Garden City, Stevenage, Slough, Maidenhead, Milton Keynes, Hitchin, Bletchley. WHY SHOULD I APPLY? · Friendly, close knit, experienced team of Electrical Engineers - with a great team spirit · Work life balance is important! Come in, do your job, leave at a sensible hour · With 100 years in business - we're not going anywhere. Stable, reliable job - and a great place to work JOB DESCRIPTION: Calibration Technician, Electrical Engineer, Testing Engineer - calibration, electrical devices Working in the service department (of 6) and reporting to the Service Supervisor, you will run testing and calibration on circa 15-20 jobs per day. Using specialist calibration software, you will check the accuracy of the equipment and calibrate. After carrying out visual and basic electrical safety checks you will label appropriately, change batteries and clean the equipment before processing certification. If a unit fails calibration, you will check and adjust the equipment as required. PERSON SPECIFICATION: Calibration Technician, Electrical Engineer, Testing Engineer, Electrical Technician - Calibration, electrical devices · You will have an NVQ Level 3 Electrical Qualification, or equivalent, or above. · Good organisation skills with high attention to detail and a systematic approach to work are vital. · Some computer literacy and the capacity to learn how to properly use specialist calibration equipment will be required. · You will also ideally have some exposure to mains / high voltage electrics. This role would suit an Electrical Fitter or Electrical Assembler, or anyone who can wire a plug and not electrocute themselves! THE COMPANY: We're approaching 100 years in business and we are a well-respected manufacturer and brand of portable & hand-held electronic instrumentation. With a heavy focus and investment on R&D and New Product Development, we're genuinely a market leader for innovation in our industry sector. It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Calibration Technician, Calibration Engineer, Test Engineer, Electronics Engineer, Electronics Technician - calibration software, testing, diagnosis, diagnose, fault-find, schematics, prototype, assembly, analogue, digital, circuit, PCB, printed circuit board. INTERESTED? Please click apply. You will receive an acknowledgement of your application. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: SP18487, Wallace Hind Selection

Are you an Electronic Design Engineer looking to step up into a more senior, responsible and autonomous position within a cutting-edge R&D team? We are looking for candidates having good electronic circuit design and electrical design with some basic firmware programming experience. Any exposure to higher voltage such as mains or EV would be an advantage. If you want a varied and dynamic role within a well established and successful business - based at our site in Watford, this role is the next step in your Electronic Design Engineering career. BASIC SALARY: Up to £75,000 BENEFITS: · 30 days holiday rising with service · Full access to company benefits package including pension · Flexible working within core hours LOCATION: Watford with free on-site parking. COMMUTABLE LOCATIONS: Hemel Hempstead, St. Albans, Hatfield, Harrow, High Wycombe, Luton, Hatfield, Welwyn Garden City, Stevenage, Slough, Maidenhead, Milton Keynes, Hitchin, Bletchley, Northampton, Bedford, Aylesbury, Guildford, Reading JOB DESCRIPTION: Electronic Design Engineer - Electronic Circuit Design, R&D, Test and Measurement Instrumentation As our Electronic Design Engineer working in our R&D department, you will be designing and developing electronic circuitry and firmware for portable and hand held electrical equipment. You will be redesigning existing products for annual product launches. KEY RESPONSIBILITIES: Electronic Design Engineer - Electronic Circuit Design, R&D, Test and Measurement Instrumentation · Product design of electronic circuitry and firmware for portable electrical equipment. · Maintenance of existing product line, e.g. due to component obsolescence, changes in standards, etc PERSON SPECIFICATION: Electronic Design Engineer - Electronic Circuit Design, R&D, Test and Measurement Instrumentation Ideally, you will have a proven track record of Product Design - Electronic, Electrical equipment. This could (for instance) be test and measurement equipment (medical, industrial, commercial etc.), domestic goods, personal electronics amongst many other things. Candidates with inverter development experience are generally strong matches, as are some candidates with EV BMS design. · Programming of real time, embedded firmware. · Proficiency in C · Analogue & digital electronic design. · Schematic capture using Altium or similar. · Experience of high voltage technology designs · Designing products to a set of legal / safety standards. Any exposure to ST MCU (Micro Controller Unit) design would be an advantage. THE COMPANY: We're approaching 100 years in business, we're a well-respected manufacturer and brand of portable & hand-held electronic instrumentation. With a heavy focus and investment on R&D and New Product Development, we're genuinely a market leader for innovation in our industry sector. PROSPECTS: Regular salary reviews and potential to develop your career with a well established and growing business. It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Electronic Design Engineer, Electrical Design Engineer, Firmware Engineer, Systems Engineer - C, C++, MCU, Electrical Test & Measurement, Analogue Electrical Design. Low Voltage Systems, High voltage technology, Instrumentation, Product design, Research and Development (R&D). Electronic Circuit Design INTERESTED? Please click apply. You will receive an acknowledgement of your application. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: SP18478, Wallace Hind Selection

Portfolio Manager (Transformation) Grade: 6.1 Salary: in the region of £50,000 plus annual bonus (20%), car allowance and other Veolia benefits Location: Hybrid - London Head office N1 9JY When you see the world as we do, you see the chance to help the world take better care of its resources, and help it become a better place for everyone. It's why we're looking for someone who's just as committed as we are, to push for genuine change and bring our ambition of Ecological Transformation to life. We know that everyone here at Veolia can help us work alongside our communities, look after the environment, and contribute to our inclusive culture. What we can offer you: Access to our enhanced company pension scheme Private Medical Insurance Company car or allowance £6,600 per annum Access to a range of resources to support your physical, mental and financial health, so you can lean on us whenever you need to 24 hour access to a virtual GP, 365 days a year, for you and family members in your household What you'll be doing: Take ownership of Veolia's existing Capacity Market activities, generating £ms per year, managing all steps of the process with strong attention to detail and adherence to strict deadlines. Operate with a high degree of freedom in defining and refining the scope of portfolio activities, with regular steering meetings with the Head of Flexibility to align direction and set objectives. Develop and maintain a robust understanding of energy market direction and the evolving role of flexibility services, translating this into actionable strategies and pilot projects with defined KPIs. Responsible for asset registration with relevant flexibility services and ensuring ongoing compliance with participation rules, including instrumentation and data logging requirements. Maintain close and regular interaction with Veolia Business Units involved in and impacted by flexibility services - including Energy Markets, IWE, Treatment, Commercial, and Municipal - engaging at all levels from operations managers through to directors. Engage with other Veolia zones and Veolia Group to share and promote best practice in flexibility and portfolio management. Represent Veolia UK in workshops and forums with TSOs, DSOs, and wider market stakeholders, contributing to Veolia's external profile in the flexibility space. Act as the primary operational and technical point of contact for clients throughout onboarding, project delivery, and ongoing operations, ensuring high service quality and long-term client satisfaction. Develop, maintain, and continuously improve processes for asset performance tracking, aggregator performance monitoring, risk evaluation, potential assessment, contract management, and regulatory compliance. What we're looking for: Essential: Thorough experience in energy markets, operations, engineering, data, or other technical/regulated environments. Strong analytical mindset and a solid interest in power systems and market mechanisms. Working at the intersection of clients, markets, and technical systems in fast-moving environments. Strong analytical and problem-solving skills. Good understanding of energy markets, power systems, or regulated environments. Ability to work with data and modeling tools (e.g. Excel, SQL, Python, Grafana or similar). Interest in market mechanisms and energy regulation; knowledge of ancillary services is a plus. Operational knowledge of capacity markets is a huge addition. good understanding of fundamentals of flexibility markets. Desirable: degree in a numerical relevant discipline (i.e. mathematics, engineering, economics) Specific modelling and technical skills in energy markets. Knowledge and comfort with modelling in Python, utilising Databricks, Grafana, Power BI or other analytical tools. What's next? Apply today, so we can make a difference for generations to come. We're proud to have been named as one of The Sunday Times Best Places to Work for three consecutive years in 2023, 2024 and 2025. This consistent recognition reflects our commitment to our people, demonstrating that Veolia is not just transforming the environment, we're also transforming what it means to have a rewarding, purposeful career. We're dedicated to supporting you throughout your application journey, offering adjustments where reasonable and appropriate. As a proud Disability Confident Employer, we will offer an interview to applicants with a disability or long-term condition who opt-in to the Disability Confident scheme, and meet the minimum criteria for our roles. We're also committed to ensuring that all applicants and colleagues receive fair treatment without discrimination on any grounds, aiming to create a diverse and inclusive workplace where everyone can thrive. If you are successful in securing a new role or promotion within the company, any offer to you may be subject to the acceptance of standardised terms and conditions. These new terms and conditions may differ from your current contract, if you have any questions about how this might affect you, please don't hesitate to contact your line manager or the HR team. Job Posting End Date: 31-05-2026 What's next? Apply today, so we can make a difference for generations to come. We're proud to have been named as one of The Sunday Times Best Places to Work for three consecutive years in 2023, 2024 and 2025. This consistent recognition reflects our commitment to our people, demonstrating that Veolia is not just transforming the environment, we're also transforming what it means to have a rewarding, purposeful career. We're dedicated to supporting you throughout your application journey, offering adjustments where reasonable and appropriate. As a proud Disability Confident Employer, we will offer an interview to applicants with a disability or long-term condition who opt-in to the Disability Confident scheme, and meet the minimum criteria for our roles. We're also committed to ensuring that all applicants and colleagues receive fair treatment without discrimination on any grounds, aiming to create a diverse and inclusive workplace where everyone can thrive

We are seeking an experienced and proactive Workshop Manager to lead the day-to-day operation of our Mechanical and Electronics Workshop, ensuring it operates safely, efficiently and to the highest technical standards. In this varied and hands-on role, you will supervise and develop a skilled team of technicians, manage workshop facilities, equipment and budgets, and act as a key technical partner across research, teaching and enterprise activities. You will oversee the design, prototyping and manufacture of bespoke experimental rigs, instrumentation and test systems, while providing expert advice on materials, manufacturing methods, electronic integration and commissioning. The role also involves managing supplier relationships, evaluating outsourcing opportunities, developing cost-recovery processes, and driving continuous improvement across workshop operations and services. We are looking for a qualified engineering professional with significant experience managing a technical or engineering workshop environment, ideally within research or higher education industry. You will bring strong leadership skills, practical fabrication and problem-solving expertise, and the ability to balance hands-on technical support with operational and administrative responsibilities. Applicants should have experience in project costing, workshop safety and compliance, and the use of CAD/CAM and engineering design tools such as SolidWorks or Fusion 360. Experience with CNC machining, 3D printing, supplier management or internal charging models would be advantageous. Above all, you will be an organised and collaborative professional who is passionate about delivering high-quality technical support and fostering a positive, inclusive and safety-focused working environment

We are supporting a cutting‑edge deep‑tech company in London that is building full‑stack photonic quantum systems designed to transform how organisations run machine learning, generative AI, and large‑scale optimisation workloads. Their technology is already deployed in multiple real‑world environments, and they’re now entering a major growth phase as they prepare to launch their next‑generation system. This is a rare opportunity to work on production‑grade quantum‑classical systems, collaborating directly with physicists, hardware engineers, and platform specialists to bring advanced quantum capabilities into modern AI and data‑centre ecosystems. You’ll join the core software team responsible for the systems layer that connects quantum hardware to classical compute infrastructure. This includes designing and optimising the software that orchestrates quantum control, manages low‑latency data paths, and ensures reliable operation in demanding environments. You will: Design, build, and optimise core systems software in Python (with C++ or Rust also valuable) Own critical platform components, improving latency, throughput, reliability, and operability Develop low‑latency interfaces between quantum hardware and classical compute systems Work closely with physicists and hardware teams to integrate new platforms (FPGAs, lasers, scientific instrumentation) from prototype to production Build and enhance CI/CD pipelines, observability tooling, and deployment workflows for on‑prem data‑centre environments Profile and optimise system performance end‑to‑end, turning bottlenecks into measurable improvements Influence architecture and technical direction through design proposals and pragmatic decision‑making Raise engineering quality through code reviews, testing strategy, and maintainable interfaces Collaborate cross‑functionally to translate customer and internal requirements into robust, production‑ready software Support occasional out‑of‑hours work when systems require attention (no formal on‑call rota) You don’t need to match every bullet; the team values curiosity, motivation, and the ability to dive deep into complex systems. Strong software engineering fundamentals and experience shipping production systems Proficiency in Python, plus working knowledge of C++ or Rust Experience in one or more of, low‑latency systems, Linux systems programming, high‑performance networking, embedded development, GPU programming, and/or FPGA or hardware‑software integration Comfort with modern engineering practices: code review, testing, Git, CI/CD Ability to debug and profile complex systems (latency, throughput, resource utilisation) Degree in CS, EE, physics, or similar, or equivalent practical experience Experience in commercial engineering or deep‑tech environments For immediate consideration, please forward an up-to-date CV

Maintenance Engineer Salary: Competitive salary Benefits: Company share save scheme, Competitive matched pension contributions, Life insurance Life insurance up to 4x salary Location : Elveden London Ways of Working: Site based Hours of work: Tuesday- Saturday 10pm -6.30am Contract Type: Permanent Why Greencore? Following the combination with Bakkavor in January 2026, we're one of the UK's leading creators of convenience food, driven by a simple purpose: to make every day taste better. As a vibrant and fast-moving business, we're proud to employ over 28,000 talented colleagues across 39 manufacturing sites and 21 distribution depots in the UK and the US. Together, we bring delicious food to life. Our products cover every meal occasion from breakfast through to dinner and dessert, with lunch and snacking in between. In FY25, our shared passion helped us achieve combined revenues of approximately £4bn. Our extensive direct to store (DTS) network, with 17 depots across the UK, allows us to deliver fresh and frozen food both our own and from trusted partners to thousands of stores every day, ensuring consumers enjoy the very best, whenever and wherever they shop. Our site in Park Royal, West London, spans three factories and a distribution centre. The site produces a variety of chilled ready meals, houmous dips, deli products, and savoury accompaniments, employing over 2,000 people in a fast-paced, high-volume environment. What you'll be doing In this busy and exciting role, you will bring your engineering skills and problem-solving abilities to our team to help maintain and optimise our food and drink processing and packaging assets. You'll play a key part in keeping production running smoothly, safely, and efficiently - ensuring that our equipment performs at its best to deliver high-quality products for our customers. You'll be involved in a wide range of engineering activities, from planned and predictive maintenance to responding to breakdowns and implementing improvements. Working closely with operational teams, you'll use your technical expertise to diagnose faults, carry out repairs, and contribute to continuous improvement projects that enhance efficiency, reliability, and profitability. Role Accountabilities: Prepare and carry out maintenance work on food and drink processing and packaging equipment. Conduct planned and predictive maintenance to optimise performance and prevent downtime. Respond promptly to breakdowns, carrying out repairs or corrective actions as required. Diagnose and resolve electrical, mechanical, instrumentation, automation, and pneumatic faults. Support operational teams with machinery changeovers, set-ups, and adjustments. Manufacture or repair component parts to maintain equipment reliability. Contribute to continuous improvement projects and technical performance reviews. Identify and implement engineering solutions to improve efficiency and profitability. Maintain accurate maintenance and engineering documentation. Ensure maintenance tools and equipment are available, safe, and well maintained. Support and mentor team members to develop technical skills and competence. Participate in internal and external audits to ensure compliance with safety and quality standards. What we're looking for Level 2 Maths/English; recognised Engineering Apprenticeship (C&G/EAL NVQ 3/4 or OAL FDEM). First-year requirements: IET Wiring Regs, Level 2 Food Safety, CMMS training, contractor control. Role develops multi-skilled capability with electrical bias. Strong problem-solving, communication and teamwork. Knowledge of SHE procedures. Experience in fault finding, maintenance planning, IT systems and following SOPs. Mechanical/electrical knowledge: hydraulics, pneumatics, motors, PLCs, sensors. Understanding of asset performance and spare parts management. Desirable: IOSH Managing Safely, FMCG experience, continuous improvement, condition-based monitoring, reliability techniques. We're proud to be recognised in the Gender Equity Measure Top 100 for our commitment to gender equality. If this sounds like you, join us and grow with Greencore, and be a part of driving our future success. What you'll get in return Competitive salary and job-related benefits Holidays Competitive matched pension contributions Life insurance up to 4x salary Company share save scheme Greencore Qualifications Exclusive Greencore employee discount platform Access to a full Wellbeing Centre platform Enhanced parental leave and menopause policies Throughout your time at Greencore, you will be supported with on-the-job training and development opportunities to further your career. *Colleagues whose roles are at risk of redundancy and who meet essential role criteria will be given priority consideration for this role #LI-LM1 #CVL