Instrumentation jobs in LiverpoolCrear alertas

Control and Instrumentation Engineer for an CHP Energy Centre in Woking. As a C&I Engineer you will be responsible for the operation, maintenance and development of the control, automation and metering systems.

Lead Electrical Design Engineer – Power Generation & Renewable Energy Projects Are you an experienced Electrical Engineer ready to take the lead in designing innovative energy solutions? Clarke Energy is seeking a Lead Electrical Design Engineer to deliver advanced projects across Battery Energy Storage Systems (BESS), Hydrogen, Microgrids, Gas-Powered Generation (including Biogas and CHP), and more. Your Role at Clarke Energy Based at our Knowsley headquarters, with some UK and overseas travel, this pivotal role will see you leading electrical design activities and ensuring engineering excellence across the full project lifecycle - from concept and sales support through to commissioning. If you’re passionate about shaping the future of sustainable energy, this is your opportunity to make a real impact. What You’ll Be Doing • Design Leadership: Translate concepts into detailed electrical designs that meet functional and contractual specifications. Produce calculations, specifications, and component selections., • Project Oversight: Review and approve designs for construction, ensuring compliance with standards and quality requirements., • Power System Studies: Carry out load flow, fault analysis, and protection studies using advanced software tools., • Sales & Proposal Support: Provide technical input during tender preparation and conceptual design stages., • Cross-Disciplinary Collaboration: Work closely with Mechanical Engineers, CAD draughtsmen, and Project Managers to deliver integrated solutions., • Stakeholder Engagement: Liaise with clients, contractors, and partners throughout the project lifecycle., • Safety & Risk Management: Participate in and lead HAZOPs, risk assessments, and design reviews., • Continuous Improvement: Ensure design standards are up to date and drive innovation within the team. Who We’re Looking For • Degree in Electrical Engineering (or HNC/HND with significant relevant experience)., • Minimum 5 years’ experience in power generation or related industry (1–25MW)., • Strong knowledge of LV and MV systems, control, and instrumentation., • Proficient in MS Office and electrical design tools (e.g., ETAP)., • Familiarity with AutoCAD and project planning tools., • Professional registration (IET) desirable., • Experience in CHP systems and hybrid power applications is a plus. What You'll Bring • Excellent analytical and problem-solving skills., • Ability to plan, prioritise, and manage workload effectively., • Strong communication and relationship-building skills., • Adaptability and resilience under pressure., • A proactive, hands-on approach with a commitment to quality. Why Join Clarke Energy? • Competitive salary and generous car allowance., • 25 days holiday + service-based increases., • Holiday buy/sell options., • 7% company pension contribution., • Health care cash plan & life assurance., • Employee Assistance Programme., • Flexible hybrid working., • Career development and training support. About Clarke Energy Clarke Energy is a globally recognised specialist in sustainable energy solutions. As the largest authorised distributor and service provider for INNIO’s hydrogen-ready reciprocating engines, we’re committed to engineering excellence and supporting the global drive to net-zero. Our in-house capabilities span design engineering, project management, and 24/7 after-sales service - ensuring quality and reliability across our portfolio of power generation and renewable energy projects. Ready to Join the Energy Transition? If you're a Lead Electrical Design Engineer who wants to shape the future of power, apply now via LinkedIn or our website!

Company Description The SeaKing Group specialises in electrical engineering services across marine, industrial, commercial, military, and offshore sectors. Known for exceptional expertise in marine electrical work, the company handles a diverse range of projects, including minor repairs, maintenance, and extensive refits, on various types of vessels. With a global presence, The SeaKing Group delivers high-quality solutions tailored to industry demands. Eligibility: Local applicants only. This is a full-time on-site role for a PLC/Automation Engineer, based in Wirral. The PLC Automation Engineer is responsible for designing, programming, testing, and commissioning industrial control systems. This role focuses on developing reliable automation solutions using PLCs, HMIs, SCADA systems, and associated instrumentation to improve process performance, safety, and efficiency. Role Description • Design, develop, and maintain PLC programs for industrial automation systems, • Configure and program HMIs, SCADA systems, and industrial communication networks, • Develop control system architectures and electrical control schematics, • Perform system integration, testing, and on-site commissioning, • Troubleshoot and resolve automation, instrumentation, and electrical control issues, • Modify and optimize existing automation systems to improve performance I/O lists Logic diagrams Test procedures Operation manuals • Collaborate with mechanical, electrical, and process engineers on multidisciplinary projects, • Support maintenance teams with diagnostics and training, • Ensure compliance with safety standards and industrial regulations, • Participate in FAT (Factory Acceptance Testing) and SAT (Site Acceptance Testing), • Possible occasional requirement for Harbour and Sea trials attendance. Experience with motion control, robotics, or drives (VFDs/servos) Knowledge of functional safety systems (SIL, safety PLCs) Familiarity with industrial networking and cybersecurity. Project management experience preferable. Experience in specific industries such as: • Manufacturing, • Oil & gas, • Marine/offshore, • Water treatment, • Energy Working conditions • Combination of office-based engineering and on-site field work Career Path This role can progress toward: • Senior Automation Engineer, • Controls Systems Architect Personal Attributes • Reliable, punctual, and professional, • Strong attention to detail, • Good communication skills, • Ability to work under pressure and meet project deadlines, • Pride in workmanship and quality standards Salary Industry competitive and negotiable dependant on experience.

Mechanical Design Engineering Manager required for a Pharmaceutical Machinery manufacturer based in Liverpool. The successful candidate will be leading a small team of Design Engineers to manage the design of machinery to project specifications, regulations, and objectives. Mechanical Design Manager Key Responsibilities • Lead, mentor, and develop a team of mechanical engineers, • Manage project timelines, resources, and priorities, • Deliver mechanical designs using SolidWorks, from concept to production, • Oversee prototyping, testing, and validation activities, • Specify mechanical components such as motors, gearboxes, and pumps, • Work closely with electrical, software, and assembly teams, • Liaise with suppliers on materials and components, • Ensure compliance with industry standards and regulations (e.g. ATEX, ASME, PED, ISO 9001), • Lead design reviews, risk assessments, and approve technical documentation, • Drive continuous improvement and resolve technical challenges across projects Mechanical Design Manager Job Requirements • Bachelor’s or Master’s degree in mechanical engineering or a related field., • Proficiency in CAD software (e.g. SolidWorks desirable / AutoCAD)., • Strong knowledge of manufacturing processes / Hands on fabrication and machining experience (preferred), • Experience with mechanical analysis, including FEA and thermal analysis., • Ability to manage multiple projects and adapt to changing priorities., • Be fully conversant in the use and understanding of General Arrangement Drawings, 3D Modelling software (Solidworks preferable), Detailed Design Drawings, Process & Instrumentation Diagrams, and Functional Specifications, • Strong attention to detail with demonstrable knowledge of high tolerance assemblies, limits and fits, machined parts, and interfaces. Mechanical Design Manager Salary & Benefits • Salary dependent on experience but £55k-£60k, • 7.5 hours per day (Flexible starts and finishes), • 1pm finish fridays, • Income protection & EAP (doctors app, mental health support & general wellbeing), • 25 days plus BH (we do operate a Christmas shutdown that uses 3 of these days), • 4% Employer & 4% employee - Legal & General, • Hybrid Working (WFH Wed & Fri) plus early finish Friday, • RAC cover, • Death in Service (x4)

Role- Mechanical Design Engineer Salary- £40,000 - £50,000 per annum (dependent on experience) Type- Permanent Location- Liverpool (Hybrid work available) My client is a specialist manufacturer within the Instrumentation sector. They are looking for a Mechanical Design Engineer to join their team in Liverpool on a permanent basis. The Mechanical Design Engineer will ideally have the following attributes: • BSc / BEng in Mechanical Engineering or similar, • 4 or more years of industry experience working in similar Mechanical Design role, • Ideally have some experience with process equipment and automation, • Knowledge of manufacturing processes and instrumentation, • Excellent proficiency with CAD software – SolidWorks is desirable, • Good mathematical and general engineering knowledge, • The ability to understand system requirements, • Be self-motivated with excellent attention to detail, • Have excellent communication skills both verbal and written, • Able to travel nationally and internationally on occasion The Mechanical Design Engineer role will involve: • Using CAD for concept design and producing technical drawings, • Leading client projects to convert ideas into designs, • Working on new product concepts, • Being involved in the product design and development process using CAD, • Leading manufacture, construction, installation and maintenance documentation, • Working with high precision instrumentation products, • Perform detailed calculations, • Conducting design reviews If you are interested in this position, please apply with an up to date CV as soon as possible.

Engineering Project Manager Electrical & Instrumentation Systems in Hazardous Environments Location: Hybrid West Sussex+ UK travel & occasional international travel Salary: £50-£70,000 DOE + car allowance + bonus Type: Permanent, full-time The Company A specialist engineering business delivering electrical, instrumentation and fluid-handling systems into safety-critical environments across the UK and internationally. They design, engineer, integrate and support complex assets from concept and build through to testing, commissioning and handover, working with both industrial and commercial clients. Their reputation is built on technical integrity, quality delivery and practical engineering excellence. The Opportunity This is a senior Engineering Project Manager role you’ll take ownership of the technical delivery of a large and varied project portfolio, managing multiple live projects at any one time at different stages of the process, some running over multiple years. This role is best suited to someone who enjoys setting priorities, managing competing deadlines, and owning the engineering detail, rather than pure people management. You’ll personally pull together scopes, lead designs, manage approvals, and see projects through to build, commissioning, and handover. What You’ll Be Doing • Owning the full engineering lifecycle: survey, scope, concept design, detailed design, delivery and handover, • Managing multiple concurrent engineering projects across electrical, mechanical and process disciplines, • Acting as the technical authority between commercial, design, production, quality and commissioning teams, • Supporting the commercial team with technical input, proposals, and costings, • Coordinating internal electrical design engineers and external specialist consultants, • Managing design certification, approvals, and client sign-off, • Overseeing the transition from design into production and build, • Working closely with commissioning teams to ensure systems are delivered and handed over correctly, • Maintaining regular client communication and technical confidence throughout the project lifecycle This is a hands-on management role, you will personally drive a significant proportion of the engineering workload rather than delegating everything. Technical Environment • Electrically biased systems with mechanical and hydraulic integration, • Fuel storage, transfer, and fluid-handling systems, • Large fabricated assets including tanks, skids and packaged systems, • Highly regulated and safety-critical environments (aviation, industrial, hazardous areas), • Use of external design consultants and certifying bodies What We’re Looking For You’ll be an experienced engineering professional who is comfortable managing complexity, ambiguity, and scale. Essential: • Strong electrical engineering background (E&I / controls / systems), • Proven experience delivering engineering projects end to end, • Comfortable managing multiple projects simultaneously, • Confident interfacing with clients, consultants, and internal teams, • Strong organisation, prioritisation, and communication skills, • Willingness to travel occasionally within the UK and internationally Highly desirable: • Experience in fuel systems, process engineering, oil & gas, aviation, or similar regulated sectors, • Exposure to ATEX, CompEx, or hazardous-area environments, • Experience working with HAZOP documentation and design approvals, • Understanding of mechanical and hydraulic integration, • HNC, HND or Degree in Electrical Engineering or similar Why This Role Stands Out • Genuine technical ownership, not just project tracking, • Influence across design, delivery, and client relationships, • Exposure to complex, long-life engineering projects, • Opportunity to shape engineering delivery as the business grows, • Trusted, senior role within a specialist engineering environment Interested? If you’re an experienced Engineering Project Manager ready to step into a role with real responsibility and technical credibility, we’d like to hear from you. Please email your CV to or call 0115 870 0115 for more details

This is an outstanding opportunity for an electrical design engineer or instrumentation design engineer from to join a growing electrical business xwzovoh with long term contracts in the utilities sector. Job Title Electrical Design Engineer.

Commissioning Manager Electrical, Controls & Hazardous Area Systems Location: Chichester (office & workshop based) + UK & occasional international travel Salary: £55 £70,000 DOE + car allowance + bonus Type: Permanent, full-time The Opportunity This is a senior, hands-on Commissioning Manager role within a specialist engineering business delivering complex electrical, control and fluid-handling systems into hazardous, regulated environments. You’ll take full ownership of commissioning activities, from FAT involvement through to site execution, handover, and client acceptance, working closely with engineering, projects, service, and commercial teams. Around 60% of your time will be based in Chichester (office, workshop, testing), with the remaining 40% on customer sites across the UK and occasional international travel. As such, this role suits someone within approximately one hour’s commute of Chichester who enjoys a mix of base work and site delivery. This is not a desk-only role. It’s a position for someone who enjoys technical accountability, problem-solving, and being the person others rely on when systems need to work first time. What You’ll Be Responsible For • Leading and executing commissioning activities across electrical, control, hydraulic and process systems, • Supporting and participating in FATs, SATs, site commissioning and final handover, • Planning commissioning strategies, resources and schedules across multiple projects, • Acting as the technical authority during commissioning phases, resolving issues on site, • Producing and managing SAT documentation, RAMS, handover packs and acceptance sign-off, • Supporting sales and projects with technical input, estimates and commissioning strategy, • Providing escalation-level technical support to service teams (PLC, instrumentation, controls), • Coordinating internal engineers and subcontractors during commissioning activities, • Championing safety, quality and environmental standards at all times What We’re Looking For You’ll be an experienced commissioning professional who is comfortable working in safety-critical environments and taking responsibility for delivery. This role would suit someone with significant industry experience who is comfortable leading commissioning activities rather than just supporting them. Essential experience: • Strong understanding of electrical control systems, • Strong understanding of hydraulic control systems, • Hands-on experience with PLC and HMI programming, • Experience commissioning systems in industrial or regulated environments, • Confident fault-finding capability, • Full UK driving licence Highly desirable: • Experience working in ATEX / hazardous area environments, • Experience with Accuload, Multiload or Contrec load computers, • Experience commissioning high-pressure systems, • Strong documentation discipline (SATs, RAMS, handover packs), • Ability to read and interpret P&ID drawings Why This Role Stands Out • Senior-level technical ownership, not just supervision, • Visible, valued role within project delivery, • Strong mix of office, workshop and site work, • Opportunity to influence commissioning standards and approach, • Exposure to complex, real-world engineering challenges, • Clear trust placed in your technical judgement Interested? If you’re an experienced Commissioning Manager or Senior Commissioning Engineer ready to step into a role with real responsibility and technical credibility, we’d like to hear from you.

As part of Calibre Scientific, our instrumentation service team works throughout the UK and Ireland on a diverse range of laboratory equipment. We have teams in chromatography, spectroscopy and wet chemistry, and adjacent service teams in lab equipment and services. Our teams support customers in many sectors including healthcare, life sciences, food & drink and pharma agriculture, oil, gas and renewables. Position Summary: This role provides field-based service support for NIR and Wet Chemistry instrumentation across the UK and Ireland. The position comes with full training on Wet Chemistry systems from an experienced Field Service Engineer and training for NIR systems from other Field Service personnel. The Field Service Engineer will deliver servicing, troubleshooting, and breakdown support for legacy FOSS NIR instruments and FOSS/OPSIS Liquid Line wet chemistry systems. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform the following satisfactorily (other duties may be assigned). Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Perform scheduled service, preventative maintenance, and verification on NIR and Wet Chemistry instruments., • Provide on-site and remote diagnostics and breakdown repairs for legacy FOSS NIR systems (e.g., 5000/6500, DS2500, SpectraStar, Rapitec etc.) and FOSS/OPSIS wet chemistry instruments., • Capture and retain technical knowledge from an experienced wet chemistry Field Service Engineer to ensure continuity of expertise., • Manage service visits across the UK & Ireland, including regular travel and some short-notice requirements., • Produce accurate service reports following all site visits and activities., • Complete accurate expense accounting related to travel and service visits., • Use service-related software tools, manage instrument files, and support customers in resolving networking or software-related issues where relevant.

JOB DESCRIPTION- SPM BUOY MAINTENANCE SUPERINTENDENT SPM PROJECT BASIC FUNCTION • Oversee the maintenance and operational integrity of Buoy Systems used in the Single Point Mooring (SPM)Project., • Identify and address maintenance needs promptly and conduct regular inspections and assessments of buoy conditions. RESPONSIBILITIES • Develop and implement maintenance schedules for buoy systems to ensure optimal performance and reliability., • Manage all diving and ROV operations and interventions, ensuring safety and efficiency throughout and assign tasks and manage resources effectively to meet project timelines., • Oversee the management of spare parts and logistical contingencies to ensure timely availability and support for operations., • Supervise the management of floating and subsea hose replacement, as well as the planned and unplanned maintenance and repairs of SPM (Single Point Mooring) systems., • Manage tanker vetting, mooring, loading, and unmooring operations to ensure safe and effective vessel handling., • Liaise with project managers, contractors, and regulatory authorities to coordinate maintenance activities and address concerns and provide regular updates on maintenance progress and project timelines., • Develop and implement contractual documentation and operational procedures to ensure compliance and efficiency, while maintaining accurate records of maintenance, inspections, and repairs. Prepare and present reports on buoy performance and maintenance status to management., • Provide expert guidance on buoy systems and maintenance procedures and collaborate with engineering teams to resolve technical issues and improve operational efficiency., • Assisting Project Manager during annual audits, in developing and monitoring maintenance budgets, ensuring cost-effective operations and to identify and implement strategies for reducing maintenance costs without compromising quality., • Identify training needs and facilitate ongoing professional development for maintenance personnel to enhance skills and knowledge in buoy operations and safety practices. KEY PERFORMANCE INDICATORS • The ability to effectively assist with the relationship between marine and project personnel., • Able to communicate effectively and articulately at all levels., • Excellent ability to implement and monitor planned maintenance of electronic equipment., • Excellent ability to provide remedial actions to outages affecting Mechanical Electrical, Instrumentation, HVAC, Telecom, Pedestal Crane, Control room team, HSE & Stores) maintenance team to ensure that all maintenance is correctly ., • Consumables/ inventory optimized., • Motivates electrical staff to comply with HSE and SMS objectives and requirements. KNOWLEDGE, SKILLS & ABILITY REQUIRED • Microsoft Office (Word, Excel) mandatory, Microsoft Project and Auto Cad., • Extensive knowledge and experience in relevant marine and offshore legislations,, • Inspection standards, class rules requirements, and industry codes., • Excellent communication and influencing skills at all levels of the organization., • Positive and solution-focused attitude with a clear goal-based approach to problem- solving., • Certification from a recognized commercial diving school (e.g., ADCI, IMCA) to demonstrate competency in underwater operations., • Valid diving medical certificate to ensure fitness for underwater work., • Strong negotiation, analytical and problem-solving skills., • Reinforce and strengthen the HSE culture at every opportunity in operations and projects., • Promote correct HSE behaviors’ through personal example. Take action upon any health, safety and environmental matter brought to their notice, and report to their Manager on any matter, which they are unable to rectify., • Monitoring and evaluating emergency drills to ensure procedure is in place for emergency and incident situation., • Ensure that the workforce under their control are adequately trained, competent and authorized for the operations, which they are required to perform, and kept informed of all relevant information to ensure their health and safety. Carry out appropriate induction training., • Ensure a safe working environment for employees under their control. Assist in all safety inspections to ensure that the workplace is maintained in a safe and tidy condition. Ensure as far as is reasonably practicable that the work place is kept free of potential hazards., • Ensure that risk assessments are carried out. Evaluate processes and activities for the presence of hazards. Assess record and control the subsequent risk to a tolerable level., • Conform with the emergency procedures applicable to their place of work. Ensure that the workforce is aware of, and understands, the emergency procedures., • Facilitate effective two-way communication with the workforce on HSE issues. Conduct Toolbox Talks and Pre-Job Safety Meetings. Attend HSE Meetings and ensure workforce participation., • Ensure all safety devices provided are utilized and maintained, protective equipment is worn, safety rules are observed, and safe-working practices applied. Ensure correct equipment usage, inspection and effective maintenance., • Report and investigate all accidents and dangerous occurrences, including environmental incidents in the area of responsibility., • Ensure that operations are conducted in compliance with health, safety and environmental legislation and Company policy, plans and procedures. Ensure workers under their control are kept informed of all relevant information to ensure their Health and Safety, and the protection of the Environment. HSE AUTHORITY • Having full authority to stop any unsafe work that may harm the health of personnel, cause injury to personnel or damage the environment. EXPERIENCE AND EDUCATION • Bachelor’s degree in mechanical engineering., • Valid Medical Certificate., • Relevant 10 years’ experience in same filed.

Description Complexio is Foundational AI. This works to automate business activities by ingesting whole company data – both structured and unstructured – and making sense of it. Using proprietary models and algorithms Complexio forms a deep understanding of how humans are interacting and using it. Automation can then replicate and improve these actions independently. Complexio is a joint venture between Hafnia, in partnership with Marfin Management, C Transport Maritime, Trans Sea Transport and BW Epic Kosan and Símbolo We are looking for a Senior Engineer to establish and lead our new Developer Experience team. This team’s mission is to improve engineering productivity, consistency, and satisfaction by building and maintaining the systems, processes, and tooling that underpin our Software Development Lifecycle (SDLC). You will shape how our engineers build, test, release, and monitor software, ensuring frictionless workflows while keeping ownership of business logic, test quality, and development practices firmly with the product engineering teams. This is a hands-on role with significant influence: you will design systems, implement tooling, measure productivity gaps, and drive adoption of better practices across the engineering organisation. Requirements • CI/CD Infrastructure & Tooling, • Own and operate CI/CD systems (GitHub Actions, runners, caching, artifact storage)., • Maintain stability, scalability, and cost-effectiveness of pipelines., • Build and maintain systems for our monorepo., • Ensure CI/CD observability, with metrics flowing into Datadog/Slack., • Pipeline Instrumentation & Optimisation, • Analyse pipelines for inefficiencies (e.g., flaky tests, redundant steps, lack of caching)., • Recommend and implement optimisations (parallelisation, test selection, caching strategies)., • Define benchmarks and KPIs (e.g., build times, flakiness %, cost per run)., • Measure and report on productivity gaps (e.g., time lost to flaky tests, slow builds, manual release steps)., • Onboarding & Documentation, • Maintain up-to-date documentation on SDLC processes, CI/CD, release flows, and GitHub usage., • Provide templates, playbooks, and starter kits., • Automate repetitive onboarding processes., • GitHub & SDLC Guardrails, • Own GitHub governance (branch protections, repo standards, integrations)., • Implement base SDLC guardrails (PR templates, code owners, security scans)., • Ensure compliance requirements are integrated into pipelines., • Monitoring & Incident Flow, • Set up alerts for pipeline health regressions., • Provide first-level triage to distinguish infra vs. test vs. dependency issues., • Escalate to the correct engineering team and ensure test ownership is tracked., • Release Management Support, • Build tooling for release notes, changelogs, packaging, and deployment., • Standardise release processes across services., • Enable customer-facing packaging and deployments, without owning release decisions., • Change Management & Adoption, • Identify friction in developer workflows through metrics, surveys, and incident data., • Drive adoption of DevEx improvements by partnering with engineering teams, running enablement sessions, and monitoring uptake., • Define test strategy, coverage, or quality gates (owned by engineering teams)., • Own microservice/domain documentation., • Proven experience with CI/CD platforms (e.g., GitHub Actions, GitLab CI, CircleCI)., • Strong background in SDLC practices and developer productivity tooling., • Hands-on experience with infrastructure automation (e.g., Docker, Kubernetes, IaC with Terraform, Ansible or Pulumi)., • Familiarity with observability & monitoring (Datadog, Prometheus, or similar)., • Experience managing or improving monorepo build systems., • Strong ability to measure developer productivity gaps and define KPIs., • Experience in driving adoption of change in engineering organisations., • Experience in release engineering or building developer-facing platforms., • Background in Software Engineering, SRE or infrastructure engineering, with a strong developer tooling focus., • Knowledge of compliance-driven SDLC requirements (e.g., ISO 27001, SOC2)., • Join a pioneering joint venture at the intersection of AI and industry transformation., • Work with a diverse and collaborative team of experts from various disciplines., • Opportunity for professional growth and continuous learning in a dynamic field.

PME Engineer – Building Management Systems (BMS) Ireland - Hybrid Working Salary - €50,000 - €60,000 + Package + Bonus About the Role A leading engineering organization is seeking a PME Engineer with strong Building Management Systems (BMS) experience to support the design, implementation, and optimization of building and utility control systems. This role plays a key part in ensuring safe, efficient, and compliant operation of complex industrial and regulated facilities. Key Responsibilities • Design, configure, and support Building Management Systems (BMS) for industrial and regulated facilities, • Integrate BMS with HVAC, clean utilities, process equipment, and electrical systems, • Develop and review control strategies, sequences of operation, and system architecture, • Support installation, commissioning, and validation of BMS and associated field devices, • Perform FAT/SAT, troubleshooting, and system optimization activities, • Ensure compliance with GMP, GxP, and applicable industry standards, • Coordinate with mechanical, electrical, automation, and project teams, • Prepare and maintain engineering documentation, including drawings, specifications, and SOPs, • Support ongoing system maintenance, upgrades, and continuous improvement initiatives Required Qualifications • Bachelor’s degree in Mechanical, Electrical, Automation, or Process Engineering (or equivalent experience), • Proven experience in a PME or BMS-focused engineering role, • Strong knowledge of BMS platforms (e.g., Siemens, Honeywell, Schneider, Johnson Controls, or similar), • Solid understanding of HVAC systems, instrumentation, and electrical controls, • Experience working in regulated environments (pharma, biotech, data centers, or industrial facilities), • Ability to read and interpret P&IDs, control schematics, and electrical drawings, • Strong troubleshooting, communication, and documentation skills Preferred Qualifications • Experience with GMP / life sciences facilities, • Knowledge of cleanroom HVAC and environmental monitoring systems, • Familiarity with BACnet, Modbus, and other building automation protocols, • Commissioning or validation experience, • Understanding of energy management and sustainability initiatives What’s Offered • Competitive salary and benefits package, • Opportunity to work on high-spec, technically complex facilities, • Long-term career development in a growing engineering environment, • Collaborative, hands-on engineering culture, • Hybrid Working

Electrical & Instrumentation Engineer | 4-Day Week | upto £50k Package.The Opportunity are you an Electrical & Instrumentation Engineer/Electrical & Instrumentation Technician who prefers solving root-cause issues rather than just 'patching' machines?.We are looking for a hands-on Electrical & Inst

Electrical & Instrumentation Engineer | 4-Day Week | upto £50k Package The Opportunity are you an Electrical & Instrumentation Engineer/Electrical & Instrumentation Technician who prefers solving root-cause issues rather than just "patching" machines? We are looking for a hands-on

Job Description Astute's Power Team are looking for an Electrical, Controls & Instrumentation Technician to join a large, brand new Energy from Waste Power Station located in Elton, Cheshire.

As a Level 3 Apprentice Field Service Engineer - Instrumentation (Water),you’lllearn how to:. Your apprenticeship will last 48 months, and successful apprentices will achieve a Level 3 Water industry asset maintenance technician (instrumentation) standard, endorsed by the Institute for Apprentices

A leading water services provider in the UK is looking for an enthusiastic Apprentice Field Service Engineer to join their team.This role is part of a Level 3 apprenticeship program that will equip you with the skills needed to ensure the efficiency of water systems across the North West.You will re

As a Level 3 Apprentice Field Service Engineer – Instrumentation (Water), you’ll learn how to:. Install, repair and maintain our process instrumentation, control and automation systems, ensuring our water assets are available and are working correctly and helping to keep services running smoothl

Liverpool, Manchester, Bristol, London, Ashby de la Zouch# Controls & Instrumentation Engineer## Your roleCapgemini Engineering are looking to recruit Controls & Instrumentation (C&I) engineers to join a growing team of experts working on high-profile projects within the defence sector.

Electrical and Instrumentation Technician. They will carry out maintenance and repair of electrical, control and instrumentation equipment across all Manufacturing and support Facilities in conformance with the maintenance processes and relevant cGMP, Engineering and Environmental, Health & Safety s

ApprenticeField Service Engineer - Instrumentation (Water). Your apprenticeship will last48months, and successful apprentices will achieve aLevel3Water industry asset maintenance technician (instrumentation)standard, endorsed by the Institute for Apprenticeships.

Our client can accommodate hybrid working with alternate weeks to be spent working remotely and then form their offices in West Wales. Senior C&I Designer (SPI Intools) - Hybrid Working. Strong working knowledge of Smart Plant Instrumentation (SPI Intools) is essential.

A sustainable biosurfactant company is seeking an Electrical and Instrument Maintenance Engineer to manage electrical and instrumentation infrastructure.

A major water services provider in the UK is hiring a Level 3 Apprentice Field Service Engineer specializing in instrumentation.

Relevant experience in control and instrumentation systems. Sign in to set job alerts for “Instrumentation and Control Engineer” roles. Electrical Controls and Instrumentation Lead Engineer.

Are you ready to live your future? Do you want to be part of building a greener, healthier, and strongerNorth West? Come and join us! With a range of award-winning roles on offer,you'resure to find your perfect career here at United Utilities. United Utilitiesis responsible forwater and wastewater s

A leading apprenticeship provider in the UK is offering a Level 3 Apprentice Field Service Engineer role focusing on instrumentation in the water sector. You will learn to install, repair, and maintain process instrumentation while ensuring maximum efficiency in operations.

Proficiency in CAD software is essential, with a focus on design and development of high-precision instrumentation products.

Control Systems Engineer Location: Liverpool Are you a Control Systems Engineer with experience in Siemens and Allen Bradley platforms? Do you enjoy seeing a project through from design to commissioning? Would you like to work in a regulated industry where standards and quality really matter? What's in it for you? £45k to £55k basic salary 25 days holiday plus bank holidays Hybrid working (3 days office, 2 days from home) Long-term sick cover Death in service - 4x salary Contributory pension Early (1pm) finish on a Friday What will you be doing? Designing and developing control systems using Siemens (S7, TIA Portal, WinCC) and Allen Bradley (RSLogix, Studio 5000) Developing and maintaining SCADA systems including Ignition and WinCC Professional Producing Functional Design Specifications (FDS) and Software Design Specifications (SDS) Creating and maintaining standard software blocks Supporting FATs, installation, testing and commissioning on site Troubleshooting and resolving control system issues Ensuring compliance with industry standards including ATEX, GAMP, FDA and SIL Where you'll be doing it You'll be joining a specialist engineering business delivering automated pharmaceutical manufacturing equipment. The team works closely across mechanical, process and EC&I disciplines to deliver safe, validated and efficient control systems in a highly regulated environment. What you'll need: Degree or HND in Electrical Engineering, Automation or similar Experience in panel design, instrumentation or automation projects Strong knowledge of Siemens and Allen Bradley PLC systems Familiarity with SCADA and HMI platforms Experience producing structured control system documentation packs Solid problem-solving and fault-finding skills Willingness to travel to client sites, including occasional international travel We appreciate your CV may not be up to date. No problem, just apply and we can deal with that later Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Russell Taylor will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us here. TPBN1_UKTJ

Senior Automation Engineer Salary: up to £70,000 Location: Liverpool (site-based) An established industrial processing group is looking to appoint a Senior Automation Engineer to support and deliver automation projects across multiple UK production sites. This is a hands-on role covering automation, control, electrical and instrumentation (EICA) , working closely with site teams to improve safety, reliability, and performance across complex process environments. The Role Working alongside a central automation function, you'll support projects from concept through to commissioning while providing technical support to live production sites. Key responsibilities include: Supporting automation and control projects across multiple sites Providing EICA technical support to production and maintenance teams PLC, SCADA, instrumentation, and LV electrical fault-finding Development and modification of process logic and SCADA graphics Loop checks, interlock testing, alarm verification, and system diagnostics Inspection of installations against design documentation Commissioning of new control systems, processes, and equipment Participation in HAZOP / SWIFT / LOPA studies SIL assessment, validation, and compliance support Promoting safe working practices and high engineering standards What We're Looking For Minimum 5 years' experience in automation / controls within a process or heavy industrial environment Strong background in EICA engineering Hands-on experience with Allen Bradley / Rockwell PLCs SCADA / HMI development and fault-finding experience Knowledge of industrial communications (EtherNet/IP, Modbus TCP/Serial) Experience with drives, instrumentation testing, and diagnostics Working knowledge of SIL safety systems Degree-qualified or time-served via apprenticeship Why Apply £70k salary ceiling Technically hands-on role with real site exposure Involvement in multi-site projects Long-term, stable industrial environment Strong focus on safety and continuous improvement TPBN1_UKTJ

Mechanical Design Engineering Manager required for a Pharmaceutical Machinery manufacturer based in Liverpool. The successful candidate will be leading a small team of Design Engineers to manage the design of machinery to project specifications, regulations, and objectives. Design Engineering Manager Job Overview Leadership & Team Management * Lead and mentor / develop a small team of mechanical engineers, providing guidance and professional development. * Manage project timelines, resources, and priorities to ensure project milestones are met successfully. * Create / encourage a collaborative and innovative work environment with a cross functional engineering department. Hands-On Mechanical Design * Lead the design and development of mechanical systems and components from concept to production. * Perform CAD modelling, simulations, and detailed design analysis for active projects using Solidworks. * Oversee prototyping / product development, testing, and validation of mechanical designs. * Support the engineering team in specifying ancillary equipment such as motors, gearboxes, and pumps. Project Execution & Collaboration * Work closely with electrical, software, and assembly teams to ensure seamless integration of designs. * Collaborate with suppliers and vendors to select materials and components. * Ensure compliance with industry standards (U Stamp etc.), safety regulations (ATEX, ASME, PED), and quality (ISO 9001) requirements including the management of non-conformances for mechanical engineering. * Take a lead role in the execution of Contract Design Reviews, Risk Assessments, and the approval of design documentation and specifications. Process Improvement & Problem-Solving * Drive continuous improvement in design & product development. * Troubleshoot and resolve technical challenges throughout a project lifecycle. Design Engineering Manager Job Requirements • Bachelor's or Master's degree in mechanical engineering or a related field. * Significant experience in mechanical design, with previous experience in an engineering management role. * Proficiency in CAD software (e.g. SolidWorks desirable / AutoCAD). * Strong knowledge of manufacturing processes / Hands on fabrication and machining experience (preferred) * Experience with mechanical analysis, including FEA and thermal analysis. * Excellent problem-solving and decision-making skills. * Ability to manage multiple projects and adapt to changing priorities. * Strong communication skills and ability to collaborate across teams. * Be fully conversant in the use and understanding of General Arrangement Drawings, 3D Modelling software (Solidworks preferable), Detailed Design Drawings, Process & Instrumentation Diagrams, and Functional Specifications * Strong attention to detail with demonstratable knowledge of high tolerance assemblies, limits and fits, machined parts, and interfaces. Design Engineering Manager Salary & Benefits • Salary dependent on experience but £60k-£65k * Hours: * 7.5 hours per day (Flexible starts and finishes) * 1pm finish fridays * Income protection & EAP (doctors app, mental health support & general wellbeing) * 25 days plus BH (we do operate a Christmas shutdown that uses 3 of these days) * 4% Employer & 4% employee - Legal & General * Hybrid Working (WFH Wed & Fri) plus early finish Friday * RAC cover * Death in Service (x4) Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for. TPBN1_UKTJ

Instrumentation & Controls Engineer. Instrumentation & Controls Engineer. Carrying out corrective and preventative instrumentation maintenance, ensuring schedules are met and equipment remains in peak condition.

Electrical Installation & Commissioning Supervisor.The consultant will be part of a project team where trust, integrity and accountability play a fundamental role in the collaboration it takes to execute a project successfully.You will engage with internal and external stakeholders, aligning with yo

Electrical, Controls & Instrumentation Engineer.

Instrumentation Field Service Engineers. Are you ready to take on a hands-on role where no two days are the same? As an Instrumentation Field Service Engineer, you’ll play a key part in keeping our assets running smoothly by delivering expert maintenance and technical support to our Production tea

We’re looking for a skilled Instrumentation Field Service Engineer to support the reliability and performance of our assets across the North West. Deliver efficient instrumentation maintenance and installation services across operational sites. Diagnose and resolve faults in instrumentation and sy

MEICA and capital maintenance - Our Mechanical, Electrical, Instrumentation, Control & Automation (MEICA) experts offer a one-stop solution, including ongoing operation and maintenance services. Youll be responsible for the delivery of preventative maintenance of electrical systems, controls and ins

What do our Instrumentation Operations Technicians do? Our Instrumentation Operations Technicians perform planned preventative maintenance on electrical and instrumentation systems. In this role, our Instrumentation Operations Technicians carry out maintenance, fault-finding and repair activities o

Control and Instrumentation Engineer for its Combined Heat & Power Plant in East London. This Control and Instrumentation Engineer role offers a competitive salary, pension and opportunities for career progression. If you're a Control and Instrumentation Engineer with experience working in a 24/7 he

Astute's Power team is partnering with a leading O&M provider to recruit a Lead Electrical Control and Instrumentation Technician for its Energy from Waste power plant in Hull. The Lead Electrical Control and Instrumentation Technician role offers a competitive salary, pension scheme, and excellent

Electrical & Instrumentation Technicians needed for work at Sellafield!I am currently recruiting on behalf of a major nuclear engineering solutions company for a number of Electrical & Instrumentation Technicians to work on-site at Sellafield.

This role focuses on delivering safe, reliable electrical, control and instrumentation maintenance across the plant, supporting availability, efficiency and long-te.

Instrumentation & Control EngineerHaverfordwestSalary: NegotiableYolk Recruitment is excited to be supporting a highly reputable and rapidly growing food manufacturing organisation in Haverfordwest, Wales. Following significant multimillion-pound investment into new processing lines, automation upgr

The role – Electrical, Control & Instrumentation ManagerAn experienced EC&I Manager, you will have a highly varied and challenging role and will be responsible for delivering prof.

IntroductionThe primary role of the Electrical, Electrical Control & Instrumentation Engineer will be perform E, C & I maintenance support to the sites Operations and Engineerin.

We are a well-established process plant, seeking to recruit a proven Instrumentation Technician to join or day shift E&I teamBenefits:In return for your Instrumentation skills and experience, we offer an annual salary in the region of £39K, plus Paid Overtime at Premium Rates, Enhanced Sick Pay Sch

Job Title: Electrical & Instrumentation Technician Location: RoystonWorld-changing careers, enabled by Johnson Matthey. With more than 200 years history, join us and help to accelerate the transition to net-zero! As an Electrical & Instrumentation Technician , you'll contribute to JM's mission as

Job Title: Senior Engineer Electrical Engineering (C & I) Location: Barrow-in-Furness Hybrid (2 days onsite per fortnight dependent on business needs) Salary: Competitive (Commensurate with skills and experience) What youll be doing: Develop a functional design for C&I solution for electrical sys