Instrumentation jobs in BristolCreate job alerts

Responsibilities • Conduct integration testing of ATA 28 (Fuel Systems) and ATA 32 (Landing Gear) aircraft systems as part of an on-site engineering team in Filton., • Prepare for and support flight test activities, including planning, instrumentation checks, and test execution., • Produce clear, accurate, and structured technical flight test reports., • Perform data analysis on test results, including statistical assessments, signal processing, and data visualisation., • Diagnose issues, support fault-finding efforts, and assist with root-cause analysis., • Collaborate proactively with engineering, test operations, and stakeholder teams to communicate findings and recommendations., • Work effectively in a fast-paced, time-critical environment with shifting priorities., • Learn and apply new tools, techniques, and methodologies to support evolving test requirements. Required Experience • Experience with aircraft systems or aerospace engineering environments., • Previous involvement in testing, validation, verification, or data-driven engineering work., • Hands-on experience with technical reporting and analysing engineering datasets., • Background in diagnostic or fault-finding activities., • Exposure to flight test, system integration testing, or similar environments (advantageous but not mandatory). Required Skills • Solid understanding of aircraft systems; familiarity with ATA 28/32 preferred but not essential., • Capacity to learn new processes and in-house developed tools, • Ability to perform under pressure in a dynamic environment., • Advanced Excel skills for data handling and analysis., • Proficient technical report writing with attention to accuracy and clarity., • Strong analytical mindset with experience in statistics, Fourier transforms, and plotting., • Proficiency in Python or programming language for data processing and automation is a plus.

Mobile Service Technician Medical Device & Bio-Decontamination Systems Location: Bristol (covering South Wales & Southwest England) Ideal Locations – Bristol, Swindon, Western-Super-Mere, Cheltenham, Newport Salary: £35,000 – £40,000 + Bonus + Company VanHours: Monday to Friday | 8:00am – 5:00pm Join a Growing Technical Service Team We are looking for a technically skilled and customer-focused Mobile Service Technician to support the installation, maintenance, calibration, and repair of specialist bio-decontamination and infection control equipment used within healthcare, pharmaceutical, laboratory, and cleanroom environments. This is an excellent opportunity for an electro-mechanical engineer or field service technician looking to work with advanced medical and process-controlled equipment involving instrumentation, airflow systems, sensors, ultrasonic technology, and automated safety systems. The role is field-based, covering South Wales and the South West of England, providing on-site technical support to customers across NHS, healthcare, life science, and regulated environments. Full training provided prior to starting the role,. The Role As a Mobile Service Technician, you will be responsible for ensuring equipment operates safely, reliably, and in compliance with customer and regulatory requirements. You will carry out preventative maintenance, fault diagnosis, calibration, servicing, and breakdown repairs on specialist decontamination systems utilising: • Ultrasonic vaporisation technology, • Hydrogen peroxide delivery systems, • Airflow and catalytic deactivation systems, • Embedded control electronics, • Process sensors and safety interlocks, • HMI/touchscreen control interfaces You will also provide technical training to customers, support equipment installations, and maintain accurate service documentation and calibration records. Key Responsibilities Perform planned preventative maintenance (PPM) and servicing on electro-mechanical decontamination equipment Diagnose and repair faults involving: • Pumps, motors, fans, valves, and relays, • Sensors and process-monitoring systems, • Ultrasonic atomisation systems, • Power supplies and control electronics, • HMI/touchscreen interfaces, • Safety interlocks and alarm systems, • Carry out electrical fault-finding using multimeters and diagnostic tools, • Inspect and calibrate humidity, airflow, and process sensors, • Conduct leak testing, tubing inspections, and airflow performance checks, • Support installation, commissioning, and validation activities, • Ensure compliance with preventative maintenance schedules and service level agreements (SLAs), • Deliver operator training and refresher sessions for customers, • Maintain accurate service reports, calibration records, and maintenance logs, • Provide technical feedback on recurring faults and product performance trends, • Support equipment swap-outs and emergency breakdown response where required, • Ensure all work complies with company QHSES procedures and customer site requirements Requirements Technical Skills & Experience Essential • Minimum 2 years’ experience in a field service, maintenance, or electro-mechanical engineering role, • Strong electro-mechanical fault-finding experienceUnderstanding of:, • Motors, pumps, fans, valves, relays, and sensors, • AC mains systems (220–240V), • Electrical testing and diagnostics, • Mechanical assemblies and moving systems, • Experience using multimeters and diagnostic equipment, • Ability to work independently and manage field-based responsibilities Desirable Experience Candidates with experience in any of the following areas are highly desirable: • Medical devices or biomedical engineering, • Infection prevention or decontamination systems, • HVAC, airflow, or ventilation systems, • Instrumentation and control systems, • Cleanroom or pharmaceutical environments, • Process automation or industrial controls, • Embedded systems or HMI diagnostics, • Calibration and validation procedures, • Electrical safety testing (PAT), • Hydrogen peroxide vapour (HPV) systems, • Healthcare or GMP-regulated environments Ideal Backgrounds We welcome applications from candidates with backgrounds such as: • Field Service Engineer, • Biomedical Engineer, • Electro-Mechanical Technician, • Medical Device Engineer, • HVAC Controls Engineer, • Instrumentation Technician, • Industrial Maintenance Engineer, • Pharmaceutical Equipment Engineer, • Decontamination Systems Engineer Benefits • Competitive salary (£35,000 – £40,000), • Performance bonus scheme, • Company van and tools provided, • 25 days holiday + bank holidays, • Monday to Friday working pattern, • Ongoing technical training and development, • Opportunity to work with advanced healthcare technology, • Supportive and growing technical team, • Long-term career progression within a rapidly expanding business, • Full training for you to confidently carry out the role, • Working with a company that care, and really appreciates their employees IND25

Materials Testing Technician - Field Based Destructive Materials Testing Systems - South West England Bristol, Gloucester, Swindon, Bath £30,000 - £40,000 Basic Salary + Vehicle + Benefits + Bonus • Do you have knowledge of materials testing in a lab and looking to get into a field service role?, • Perhaps you've wondered how the testing rigs function and have been a bit envious of the service engineers? Read on for the opportunity to join this organisation; a prestigious, respected company. A place where you can grow and develop. Your Role as a Materials Testing Technician: • You'll be field based, predominantly covering a region but with further UK travel as needed., • You will be responsible for the service, maintenance, and repair of this testing equipment and instrumentation., • Examples include impact, tensile, universal, fatigue, stress, or torsion testing., • You will be working within a variety of appealing manufacturing sectors including the aerospace, automotive, and medical industries, amongst others., • You will play an important role in ensuring the equipment is correctly calibrated and maintained to UKAS standards., • Compile detailed reports as appropriate., • The field-based nature of the role will require nights away from home; on average of 1 - 2 per week. Ideal Background for the Materials Testing Technician: • Knowledge of destructive Materials Testing equipment is essential, specifically on impact, tensile, universal, fatigue, stress, or torsion testing is mandatory., • Approachable, honest, and a team player., • A strong understanding of ISO/IEC 17025 would be beneficial., • A genuine interest in becoming a field-based service and calibration engineer on materials testing rigs., • Strong IT and communication skills., • Hold a full valid UK driving licence and have right to work in the UK as sponsorship can't be provided. The Client recruiting for the Materials Testing Technician: • Fastest growing company in their industry., • Excellent training, support, and ongoing opportunities., • Work with a varied client base in Research, Automotive, Aerospace, General Manufacturing, and Rail sectors., • "Recruit for attitude, train for skill", • Trusted by testing laboratories, scientists, and engineers nationally. The Package for the Materials Testing Technician: • £30,000 - £40,000 basic salary, depending on experience, • Annual company performance related bonus, • Pension at 5% from company, 3% employee, • Company van, tools, laptop & phone, • Continuous development and training, • 25 days holiday plus statutory holidays. Apply online now if you fit the above criteria and are eager to grow. Dave is the main point of contact for this role. INDENG

Field Service and Calibration Engineer - Materials Testing Materials Testing & Load Cell Systems - South West England Bristol, Gloucester, Swindon, Bath £35,000 - £45,000 Basic Salary + Vehicle + Benefits + Bonus • Are you an experienced service engineer on materials testing equipment or load cell integrated systems?, • Or do you have knowledge of materials testing in a lab and looking to get into a field service role? Read on for the opportunity to join this organisation; a prestigious, respected company. A place where you can grow and develop. Your Role as a Field Service and Calibration Engineer: • You'll be field based, predominantly covering a region but with further UK travel as needed., • You will be responsible for the service, maintenance, and repair of this testing equipment and instrumentation., • Examples include impact, tensile, universal, fatigue, stress, or torsion testing., • You will be working within a variety of appealing manufacturing sectors including the aerospace, automotive, and medical industries, amongst others., • You will play an important role in ensuring the equipment is correctly calibrated and maintained to UKAS standards., • Compile detailed reports as appropriate., • The field-based nature of the role will require nights away from home; on average of 1 - 2 per week. Ideal Background for the Field Service and Calibration Engineer: • Knowledge of one of the following is essential:, • Materials Testing equipment, either as a current service engineer, or as somebody using the machinery in a lab. Specifically on impact, tensile, universal, fatigue, stress, or torsion testing., • Service and calibration knowledge of load cells and connected systems such as checkweighers, weighbridges, or similar., • A strong engineering understanding is essential in mechanical, electrical, and fluid disciplines., • Approachable, honest, and a team player., • Strong IT and communication skills., • Hold a full valid UK driving licence and have right to work in the UK as sponsorship can't be provided. The Client recruiting for the Field Service and Calibration Engineer: • Fastest growing company in their industry., • Excellent training, support, and ongoing opportunities., • Work with a varied client base in Research, Automotive, Aerospace, General Manufacturing, and Rail sectors., • "Recruit for attitude, train for skill", • Trusted by testing laboratories, scientists, and engineers nationally. The Package for the Field Service and Calibration Engineer: • £35,000 - £45,000 basic salary, depending on experience, • Annual company performance related bonus, • Pension at 5% from company, 3% employee, • Company van, tools, laptop & phone, • Continuous development and training, • 25 days holiday plus statutory holidays. Apply online now if you fit the above criteria and are eager to grow. Dave is the main point of contact for this role. INDENG

Sector: Energy / Infrastructure Employment Type: Contract IR35 Status: Inside IR35 Location Remote working with occasional travel to office locations including: • Manchester, • London, • Newcastle, • Glasgow Duration & Rate • 6-month rolling contract, • Up to £65.00 per hour (Umbrella) Overview We are seeking an experienced Control & Instrumentation (C&I) Engineer with a strong systems engineering background to support major projects across the energy sector. This includes power generation, CCGT, utilities, oil & gas, and process industries. This role is ideal for an engineer who thrives in technically demanding environments and has hands-on experience delivering advanced control system solutions for large-scale energy assets. The successful candidate will bring strong expertise in control system architecture, control philosophy development, and control narrative preparation, alongside experience working with leading Distributed Control Systems (DCS). Key Responsibilities • Develop Control Narratives, Control Philosophy documents, and Functional Logic Specifications for energy-sector automation systems, • Design robust control system network architectures, including Ethernet/IP, Profinet, Modbus, and redundant industrial networks, • Lead or support system configuration, testing (FAT/SAT), commissioning, and operational optimisation activities, • Interface with OEMs, EPC contractors, and multidisciplinary engineering teams on system design, upgrades, migrations, and modernisation projects, • Develop and maintain system backup strategies and cybersecurity policies, ensuring compliance with relevant instrumentation and energy-sector standards, • Produce high-quality technical documentation, engineering reports, and change management records Required Experience & Skills • Proven experience in C&I control systems within power plants, CCGT, utilities, oil & gas, or process industries, • Experience working with a major EPC contractor on complex FEED or detailed design projects, • Strong understanding of P&IDs, Cause & Effect diagrams, and industrial control strategies, • Hands-on knowledge of industrial communication protocols such as Profinet, Modbus TCP/IP, and Ethernet/IP, • Experience with OPC UA for system integration and data exchange, • Familiarity with DCS, ESD, and F&G systems, • Understanding of IEC 62443 cybersecurity principles and their application in critical infrastructure Desirable Experience • Experience with leading DCS platforms such as Emerson Ovation, Emerson DeltaV, or Siemens SPPA-T3000, • Previous involvement in large-scale infrastructure or energy transition programmes Key Competencies • Strong analytical and problem-solving skills, • Ability to work effectively within multidisciplinary engineering teams, • Excellent communication and stakeholder management skills, • High attention to detail and commitment to engineering quality and safety Summary This is an excellent opportunity to contribute to complex, high-value energy projects supporting critical national infrastructure and the ongoing energy transition. The role offers a flexible working arrangement, exposure to leading-edge technologies, and involvement in major engineering programmes across the UK.

Control Engineer UK – flexible home based The Company A global industry leader in the design and manufacture of full line packaging equipment and robotic automation solutions for the food, beverage and pharma sectors. With a pioneering and progressive leadership ethos that shapes the global company culture, the business is a place where everyone’s voice matters with collaborative working at its core. The Controls Engineer will join an established engineering team and work closely with other departments (including project management, commercial, operations and field service) to lead the design, development and implementation of the company’s packaging solutions. The Controls Engineer will be focussed on ensuring optimum system performance and improved reliability, safety and efficiency across all company installations. Responsibilities • Effectively translate defined project requirements into effective and efficient controls solutions for conveyor systems and integrated packaging lines., • Develop PLC and HMI logic aligned to system requirements and integration standards., • Lead the preparation for system integration and provide startup support., • Build effective working relationships with internal teams, contractors and OEM partners regarding controls and specific site needs., • Actively participate in relevant project meetings with multidisciplinary colleagues., • Diagnose and resolve automation, instrumentation and controls issues., • Provide technical support when electrical or system integration issues arise., • Proactively identify opportunities for process improvement and application of latest best practice. The Person • Skilled at building effective relationships across multiple company departments., • Clear communicator with a skill to effectively translate complex technical information., • Meticulous eye for detail across multiple complex projects., • Strong appetite to seek and apply performance improvements and identify practical solutions to unforeseen problems., • Comfortable and effective working across multiple simultaneous projects and sites., • Flexible to take on evolving responsibilities in response to company objectives and priorities. Requirements • Bachelor’s degree in Electrical Engineering or a related discipline preferred., • 5-10 years experience designing and programming industrial control systems, ideally in automation or manufacturing environments., • Working knowledge of PLC and HMI platforms and industrial communications networks inc Siemens and/or Rockwell, • Strong troubleshooting and analytical skills., • Experience supporting systems through installation, startup and troubleshooting. This is an excellent opportunity to join an established pioneering global organisation with strong growth aspirations. If you are interested in being considered you are encouraged to apply at the earliest convenience. Closing date for all applications Tuesday 30th June 2026

About Complexio Complexio is the intelligence layer for enterprise AI. Our platform builds a connected understanding of how businesses actually operate - across people, processes, and systems. Enterprises have invested heavily in AI platforms, copilots, and data infrastructure - yet daily work still runs on manual hand-offs and thousands of unseen tasks buried in emails, chats, and spreadsheets. Complexio closes that automation gap. Our Event Knowledge Graph ingests structured and unstructured data to create a living map of how an organisation truly works - every task, interaction, and dependency. Our Context Broker unifies this knowledge across enterprise systems in real time, enabling our Orchestration layer and Enterprise Automator to discover, design, and execute workflows autonomously. Stevie, our conversational AI assistant, gives teams a natural way to query and act on that intelligence. Complexio deploys securely within your infrastructure and integrates with the enterprise platforms you already run on - turning organisational knowledge into measurable business outcomes. A joint venture between Hafnia and Símbolo, backed by leading maritime partners including Marfin Management, C Transport Maritime, Trans Sea Transport, and BW Epic Kosan. Born in maritime, now scaling rapidly across industries. We are now onboarding enterprise customers globally, with a platform built to handle the pace and complexity of real business operations. Role Purpose Enterprise organisations do not buy software - they fund outcomes. The Value Engineer exists to make the connection between Complexio's platform capabilities and the specific, quantified business outcomes each customer cares about, at every stage of the relationship. Value engineering as a discipline has become a defining commercial capability at the world's leading enterprise software companies. ServiceNow built a global Value Engineering practice to justify platform ROI at scale. Celonis pioneered value engineering in the process mining space, making quantified process improvement the centrepiece of every enterprise deal. SAP's Value Advisors and Salesforce's Business Value Consultants have made the ability to prove financial return a standard expectation in enterprise software procurement. Complexio is building this capability now - at the stage where it will have the most impact on commercial outcomes. This role sits at the intersection of business consulting, commercial strategy, and deep operational understanding. You are not a sales support function. You are an independent, credible business advisor who earns the trust of customer CFOs, COOs, and operational leadership by doing rigorous work - identifying where value is being lost, modelling what recovery is worth, and demonstrating with evidence what Complexio has actually delivered. Key Responsibilities Value Discovery & Business Case Development • Lead structured value discovery engagements with prospective customers - working with operational, financial, and technology stakeholders to identify and quantify the cost of their current automation gap, • Map customer operational workflows to Complexio's platform capabilities, identifying the specific processes, hand-offs, and inefficiencies where the EKG, Context Broker, Enterprise Automator, and Stevie create measurable impact, • Translate business case outputs into executive-ready materials - CFO-grade financial models, board-level summaries, and ROI one-pagers that withstand scrutiny from finance and procurement stakeholders, • Validate assumptions with customers through structured interviews, data analysis, and process observation - never building a business case on hypotheticals that will be challenged at approval Pre-Sales Value Engagement • Partner with Sales, Client Directors, and Solutions Consultants in enterprise sales cycles - joining customer engagements specifically to lead the value and business case workstream, • Run executive value workshops with customer C-suite and operational leadership - structured sessions that move from pain identification through to quantified opportunity in a single engagement, • Produce deal-specific value narratives and ROI models that are calibrated to each customer's operational context, financial metrics, and internal approval process, • Equip the sales team with reusable value frameworks, benchmark data, and industry-specific ROI models that accelerate deal cycles across similar customer profiles, • Support commercial proposal development by providing the financial and business value content that underpins pricing, contract structure, and deal terms Post-Sale Value Realisation • Own the value realisation framework for Complexio's customer base - defining how value is tracked, measured, and reported from deployment through to steady-state operation, • Establish baseline metrics with customers at the point of deployment - agreeing the operational and financial KPIs against which Complexio's impact will be measured Value Benchmarking & Market Intelligence • Build and maintain Complexio's value benchmark library - a structured, continuously updated repository of outcome data across customers, sectors, use cases, and platform capabilities, • Develop sector-specific value models for Complexio's primary markets - maritime operations, energy trading, industrial workflow management - grounded in real customer data and validated against industry benchmarks, • Track and analyse how value accrues over time across the customer base - identifying which deployment patterns, use cases, and adoption sequences drive the fastest and largest outcomes, • Monitor competitive value positioning - understanding how Complexio's ROI profile compares to alternatives including Microsoft Copilot, Celonis, and incumbent manual processes Internal Value Enablement • Build and maintain a value engineering toolkit accessible to the broader commercial team - including value discovery frameworks, ROI calculators, benchmark data packs, and executive presentation templates, • Partner with Product and Engineering to ensure that Complexio's platform instrumentation supports value measurement - advocating for the telemetry, reporting, and analytics capabilities that make value realisation visible to customers, • Feed value data and customer outcome evidence back into Complexio's product prioritisation process - ensuring the roadmap is guided by where the platform creates the most demonstrable impact Executive & C-Suite Engagement • Engage directly with CFOs, COOs, and operational leadership as a credible, independent business advisor - not as a vendor representative, • Lead or co-lead executive value presentations and business case reviews at board and C-suite level - with the financial and operational rigour to withstand challenge from sophisticated buyers, • Shadow Co-CEOs and the CRO in strategic customer engagements as required - providing the value and ROI narrative in high-stakes commercial discussions, • Build long-term advisory relationships with senior customer stakeholders that extend beyond individual deals and create durable commercial anchors What We're Looking For Essential • 6+ years in a value engineering, value advisory, business value consulting, or management consulting role - ideally with direct experience in enterprise software, process automation, or AI/data platform contexts, • Demonstrable experience building and presenting rigorous business cases and ROI models to C-suite and finance stakeholders - models that have withstood scrutiny and influenced major investment decisions, • Strong financial modelling capability - comfortable building NPV, IRR, and payback analyses from first principles and translating operational data into financial outcomes, • Deep understanding of how large enterprises make investment decisions - approval processes, financial hurdle rates, competing priorities, and the politics of internal sponsorship Desirable Experience in the maritime, shipping, energy, or industrial sectors - operational familiarity with voyage management, fleet operations, chartering, trading, or supply chain workflows Experience with process mining, workflow analytics, or operational intelligence tools - and the ability to use data outputs to construct value narratives Familiarity with AI automation economics - understanding how to model labour displacement, error reduction, and decision acceleration in organisations adopting AI-driven workflows Experience building value benchmark databases and sector-specific ROI frameworks from scratch Who You Are Rigorous and credible - your business cases are built on real data, sound assumptions, and transparent methodology; you do not overstate value and you do not produce numbers that collapse under scrutiny A skilled interviewer and listener - you can run a discovery session with a COO or a fleet manager and extract the operational detail you need to build a credible model, without making them feel interrogated Commercially motivated - you understand that your work directly enables revenue and you take that seriously; you are not an academic analyst, you are a commercial contributor Independently minded - you are willing to tell a customer or a sales team that a use case does not meet the value threshold, because your credibility depends on honesty, not optimism • A strong writer and presenter - you produce executive materials that are clear, well-structured, and visually compelling; you do not hide weak analysis behind impressive slides, • Intellectually curious about how industries operate - you find genuine interest in understanding how a maritime shipping company makes money, where it loses it, and what operational changes move the needle, • A builder - Complexio does not yet have a mature value engineering function; you are excited by the opportunity to create the frameworks, tools, and benchmarks that will define how the company communicates value at scale

Senior EICA Engineer (Contract) – Water Sector An engineering contractor is seeking a Senior EICA Engineer with strong experience in UK water projects to support delivery across multiple frameworks. This is a long term, contract with the option to be outside ir35. Remote workers may also be considered. Key Responsibilities • Produce cost-effective EICA design documentation, • Develop electrical, control, and instrumentation designs, • Conduct site surveys and attend FATs, • Review subcontractor designs and supplier quotations, • Ensure compliance with UK standards, legislation, and specifications, • Prepare technical documentation, equipment requisitions, and installation scopes, • Support construction and commissioning activities Requirements • Extensive experience in UK water sector projects (essential), • 10+ years’ engineering experience, • Strong knowledge of UK standards (including WIMES), • Experience with ATEX, CE marking, and hazardous area installations, • Understanding of HSE and risk management Qualifications • Degree in Electrical, Electronic, or Control Engineering (or equivalent experience) Profile • Strong communicator with a proactive approach, • Experience leading or delegating work, • Safety and client-focused mindset Only those with proof of right to work in the UK should apply for this role.

Commissioning Engineer - Remote (UK-Based) - Global Travel Required Are you an experienced Commissioning Engineer ready to take on a global challenge? We are looking for a motivated and technically skilled individual to join our dynamic team, delivering world-class process engineering projects across EMEA, APAC, and beyond primarily in the food & beverage industry. What You’ll Do: Depending on project needs, you may be deployed as a Process Commissioning Engineer, Commissioning Team Leader: • Lead Installation and Operational Qualification (IQ/OQ) activities on client sites worldwide, • Commission and start up process plants, including utilities, MCC panels, instrumentation, and control systems, • Troubleshoot mechanical, hydraulic, thermal, and electrical issues on-site, • Manage and coordinate commissioning teams and contractors across complex, multi-disciplinary projects, • Deliver customer training and support first production runs, • Produce detailed commissioning reports and weekly project updates, • Ensure strict compliance with health, safety, and contractual requirements on every site What We’re Looking For • Degree-level qualification in Engineering, Food Technology, or Dairy Technology (or equivalent), • Minimum 4 years’ experience in Process Engineering or Commissioning roles, • Strong technical skills across mechanical, electrical, and instrumentation disciplines, • Excellent communication skills in English (spoken and written), • Confident working autonomously on international sites and managing stakeholder relationships, • Full willingness to travel globally — role requires approximately 80% travel Working Pattern: Remote-based in the UK with approximately 80% global travel. You’ll work across EMEA and APAC regions, spending extended periods on client sites as projects demand.

CT19 is working with an emerging cleantech organisation focused on advancing sustainable solutions for complex materials. With applications across multiple industrial sectors, the business is developing scalable technologies designed to reduce waste and support circularity. The company is entering an exciting growth phase, building out pilot-scale operations and expanding its engineering capability. Process Technician role: This is a hands-on role for someone who enjoys making things work. You will join during the commissioning phase of a pre-pilot system and play a key role in the transition to pilot operations. You will be involved in building, commissioning, operating and maintaining process equipment, working closely with engineering and R&D teams to support trials and ensure the plant runs effectively. This role is ideal for someone with a strong practical mindset who takes pride in fault-finding, problem-solving and keeping systems running in a fast-paced environment. Process Technician responsibilities Build & Commissioning • Support the physical build and commissioning of process equipment, • Install and test pumps, pipework, valves, heat exchangers and associated systems, • Fabricate brackets, supports and custom fixtures where required, • Work alongside engineers and contractors during installation phases Operations & Maintenance • Operate pilot plant equipment during trials, following procedures and monitoring performance, • Carry out preventative maintenance, servicing and calibration activities, • Diagnose and resolve mechanical and process faults using a structured approach Trial Support • Support experimental programmes by setting up equipment and monitoring runs, • Prepare plant and materials ahead of trials, • Record data and provide practical observations during testing Process Technician requirements • Strong practical mechanical ability, gained through hands-on experience or training, • Experience working with process plant, industrial equipment or mechanical systems, • A methodical approach to fault-finding and problem-solving, • Understanding of safe working practices in a process or industrial environment, • Reliable, proactive and able to take ownership of tasks Desirable: • Engineering apprenticeship, HNC/HND or equivalent, • Experience in process industries such as chemicals, manufacturing, or food production, • Experience with pipework, fluid systems or pneumatics, • Basic knowledge of electrical systems or instrumentation, • Relevant operational licences (e.g. forklift, IPAF)

Senior EC&I Engineer £51-£63 per hour (Inside IR35) 12 months Various locations across the UK - Glasgow, Leicester, Reading, Bristol, Warrington. The role As a Senior Electrical Control and Instrumentation Engineer, you’ll lead the delivery of complex, safety‑critical electrical, control and instrumentation solutions across the nuclear lifecycle, from new facilities through to operational support and decommissioning. Day-to-day, you’ll be required to: • Leading the design, specification and integration of electrical, control and instrumentation systems, • Delivering high‑quality engineering outputs that meet nuclear safety, quality and regulatory standards, • Collaborating with project teams, safety case authors, commissioning engineers and stakeholders, • Reviewing technical documentation, calculations and specifications for compliance and robustness, • Supporting continuous improvement and innovation within safety‑critical engineering solutions The role can be based at any of our main UK locations, depending on project demand including Glasgow, Leicester, Bristol, Newbury or Warrington. Hybrid working patterns are available. Essential experience of the Senior Electrical Control and Instrumentation Engineer: • Extensive experience designing and delivering electrical, control and instrumentation systems, • Proven application of nuclear or highly regulated industry standards and safety requirements, • Experience contributing to complex, multidisciplinary engineering projects, • Ability to engage effectively with regulators, clients and technical stakeholders, • Experience producing and reviewing technical specifications, calculations and safety inputs Qualifications of the Senior Electrical Control and Instrumentation Engineer: • Degree qualified in an electrical, control or instrumentation engineering discipline, or equivalent experience, • Professional registration with a recognised engineering institution is desirable Security Clearance The successful candidate must be able to achieve and maintain Security Check (SC) security clearance for this role. Further details are available at _

Location: Bristol Job Type: Permanent, Full-time Field: Nuclear Way of working: Hybrid (2 days remotely) Education Level: Master’s degree or equivalent in Electrical Engineering Experience: at least 2 years of experience Salary: Attractive following experience Starting date: ASAP ABOUT US KURY UK Ltd is part of an international company, Kury Groupe, 100% dedicated to the nuclear field with 26 years of experience in nuclear engineering. Since then, we have been working with EDF (French Electricity Producer). We are involved in several nuclear projects, including FA3 EPR (France), the French fleet, Taishan EPR (China), Hinkley Point C and Sizewell C. We are now looking for engineers to join our Team in the UK. Our human-sized structure (100 employees worldwide) allows us to devote ourselves to mentoring and training our engineers. We take a special care of our employees’ development by ensuring them quality projects through which they will increase their skills. Our Kury values: Curiosity, Trust, Rigour, Teamwork Our team is international, our engineers are coming from different countries as we are looking for the best talents! SUITABLE CANDIDATE You enjoy analysing concrete problems, finding solutions and then setting them up. Getting involved in significant industrial and engineering projects involving very demanding precautions as regards industrial safety captivates you. Your good analytical skills, sense of logic, aptitude for synthesizing and your scientific knowledge will allow you to adapt quickly to multi-system environments. You have the ability to adapt to new technical problems. You know how to manage a small-sized team. You like the idea of working on Projects and Quality matters to you. You are a good team player. THE ROLE As an Electrical Engineer on the scope of System Engineer IED for lighting and power outlets, your main mission will be to ensure the following activities: • Produce, review and update the system documentation for diverse electrical systems (DN, DS, DX). This includes operator instructions, human machine interface, safety and environmental specification, control logic design, as well as periodic testing in compliance with the engineering rules, methodologies, quality processes, and tools., • Management of interfaces with client disciplines involved in the radioprotection equipment contracts., • Management of the design and operation of the EPR systems during the design, construction and commissioning phases, in accordance with safety requirements, regulatory requirements and design rules., • Ensure the proper integration of detailed mechanical diagrams, functional diagrams, 3D models in the associated tools., • Receive modification requests issued by various engineering teams, verify the coherence of these modifications, systematically challenge their necessity and ensure with them the feasibility and validity of these modifications., • Participate in experience-sharing activities (OPEX shared with other projects). During the first months, you can count on the KURY Team to assist you all along your projects. This experience will give you the opportunity to move on to other projects in the medium term: you will tackle varied but complementary projects, studies and technical topics. Your understanding of the technical and environmental challenges will allow you to take on complex and critical transversal studies. REQUIRED SKILLS • Knowledge or relevant experience in the nuclear industry., • Knowledge of the processes involved in industrial projects in the energy field., • Knowledge of the RCC-E electrical technical regulations and the technical reference system (NFC15-100 / NF C 13-200 / BS7671 / IEC 60909)., • Experience in Technical document reviews., • Experience in radioprotection field, instrumentation equipment design, procurement, testing or installation., • Experience in Technical coordination., • Ability to learn, prioritise and manage numerous tasks., • French-speaking would be an advantage.

Astute's Nuclear Team is partnering with a leading engineering consultancy delivering complex projects across the defence and nuclear sectors to recruit a Electrical Nuclear Safety Engineer to support a portfolio of major nuclear projects across the UK, based out of their offices in Bristol or Gloucester. The strategically important Electrical Nuclear Safety Engineer role comes with a salary of £50,000 - £80,000, flexible hybrid working, private healthcare, bonus scheme, and excellent opportunities for professional development and career progression. If you're an Electrical Nuclear Safety Engineer and are looking to work for an organisation that delivers innovative engineering solutions across some of the UK's most complex and safety-critical nuclear programmes, then submit your CV to apply today. Responsibilities and duties of the Electrical Nuclear Safety Engineer role Reporting to the Nuclear Safety Team Leader you will: • Deliver electrical engineering and nuclear safety support across a diverse range of nuclear projects., • Develop and implement solutions to complex electrical power system and control & instrumentation (C&I) challenges., • Undertake engineering assessments, design modification reviews, and safety justifications for nuclear facilities., • Support hazard analysis, design basis assessments, probabilistic assessments, and safety functional requireme...

Are you a Calibration Engineer seeking to join the world's leading calibration services company, offering flexible work options and excellent career growth opportunities? If so, we have an exciting opportunity for you as a Calibration Engineer at one of our sites across the UK. About the RoleJoining our team as a Calibration Engineer, you will be responsible for calibrating a variety of measuring instrumentation and repair facilities to both ISO9001 and UKAS accredited in accordance with Company Procedures, UKAS regulations and recognised specifications. A successful candidate will be expected to independently maintain relevant records of work, data and results in a traceable and auditable manner utilizing EMS management systems. Benefits Competitive salary Continuous development and training plan 25 days holiday and the option to buy/sell days Flexible working options Access to the Trescal PerksHub Employee well-being programme Medical Health Cash Plan Pension and Life Assurance Scheme Cycle to work scheme Gym membership discounts Requirements Ideally a technical qualification such as HND, HNC, NVQ/BTEC Level 3 or above Knowledge of BS EN ISO/IEC 17025:2017 Good understanding of calibration practices and theories...

Temporary Laboratory Technician Portbury Docks, Bristol | £13.67 per hour | Monday to Friday | Day shift Introduction Acorn by Synergie is recruiting for a Laboratory Technician based in Portbury Docks, Bristol. This is a hands-on laboratory role supporting quality and production through accurate analysis, testing, and reporting of samples within a structured manufacturing environment. Key Duties Analyse samples using chemical and physico-chemical techniques. Carry out internal checks and analysis of standards in line with laboratory procedures. Maintain high standards of safety, hygiene, discipline, and performance. Keep work areas clean, tidy, and fully stocked with reagents and solutions. Prepare reagent and standard solutions for laboratory instrumentation. Maintain accurate records of work completed and results obtained. Report results promptly and highlight any unusual findings to management. Monitor daily operation of instruments and carry out minor adjustments. Report any equipment issues or abnormalities to management. Requirements Strong attention to detail and accuracy. Good communication skills and willingness to share knowledge. Drive, determination, and a methodical approach to work. Ability to follow strict laboratory procedures. Previous laboratory or manufacturing experience is desirable. A Level Science or a related degree is desirable but not essential. Must have transport due to location....

Electrical Design Engineer Filton (hybrid) £50 per hour Initially until May 2027 1-stage interview – virtual or F2F Flexible working hours Certain Advantage is collaborating with a prominent aerospace company in search of an experienced Electrical Design Engineer. In this role, you will join the Test Centre and will contribute to the development of architectures and specifications for data acquisition and control systems for a new test facility and several new test benches focused on Hydrogen testing. What you will be doing: Develop Architecture and design solutions for data acquisition and control systems Develop Electrical Component and electrical schematics Specify Instrumentation for a range of different measurements (Pressure, Flow, Voltage, Current, etc.) Produce requirement and specification documentation for data acquisition and control systems Your background: Electrical Design Tools (AutoCAD, AutoCAD Electrical, KiCad) Understanding of Electrical design principles and Electrical systems Understanding of Testing principles Experience with electrical architecture design Experience with instrumentation, data acquisition and control systems During an interview, we may ask you about: Knowledge of avionic data busses (A429, CAN, AFDX) Knowledge of avionic hardware interfaces (discretes, analogues) Please note that security checks will be c...

Are you a Calibration Engineer seeking to join the world's leading calibration services company, offering flexible work options and excellent career growth opportunities? If so, we have an exciting opportunity for you as a Calibration Engineer at one of our sites across the UK. Joining our team as a Calibration Engineer, you will be responsible for calibrating a variety of measuring instrumentation and repair facilities to both ISO9001 and UKAS accredited in accordance with Company Procedures, UKAS regulations and recognised specifications. A successful candidate will be expected to independently maintain relevant records of work, data and results in a traceable and auditable manner utilizing EMS management systems. • Competitive salary, • Continuous development and training plan, • 25 days holiday and the option to buy/sell days, • Flexible working options, • Access to the Trescal PerksHub, • Employee well-being programme, • Medical Health Cash Plan, • Pension and Life Assurance Scheme, • Cycle to work scheme, • Gym membership discounts, • Ideally a technical qualification such as HND, HNC, NVQ/BTEC Level 3 or above, • Knowledge of BS EN ISO/IEC 17025:2017, • Good understanding of calibration practices and theories AMRT1_UKTJ<...

ATEX Inspector (Electrical / Instrumentation) Avonmouth, Bristol Ongoing Work | CIS / LTD available £32.00 – £40.00 per hour (Depending on experience) We’re looking for an experienced ATEX Inspector to support ongoing work on a busy industrial / hazardous area site in Avonmouth. This is working with a specialist Electrical, Control & Instrumentation (EC&I) contractor, delivering inspection, compliance, and maintenance services across high-risk environments including chemical, energy and process sectors. The Role You’ll be carrying out hazardous area inspections and compliance work across site, ensuring equipment and installations meet statutory and safety standards. Duties will include: Conducting ATEX / DSEAR inspections on electrical and instrumentation equipment Inspecting and verifying installations within hazardous areas Identifying and reporting non-compliance and remedial actions Supporting maintenance, testing and condition reporting activities Ensuring documentation is completed to required standards Working closely with engineers, supervisors and client teams The Environment COMAH / high-hazard industrial site Process / chemical / manufacturing setting Strict safety, permit and compliance systems Long-term programme of inspection and maintenance works What We’re Looking For * Strong experience working in ...

Service Engineer / Calibration Engineer / Calibration Technicianrequired to join a leading provider of instrumentation and control products & services. The Successful Service Engineer / Calibration Engineer / Calibration Technicianwill provide installation, calibration and service of instrumentation and control products such as pressure, temperature, level and flow equipment. For example, flow meters, valves, sensors, gauges, micrometres and more. Full product training provided. The Service Engineer / Calibration Engineer / Calibration Technicianideally have calibration and service experience such as pressure, temperature, level and flow equipment. For example, flow meters, valves, sensors, gauges, micrometres and or similar engineering products / systems. Package • £35k - £42k, • Company van, • Bonus, • Overtime, • 25 days holiday + bank holidays, • Company pension, • Additional benefits Service Engineer / Calibration Engineer / Calibration Technician Role • Provide installation, calibration and service of instrumentation and control products such as pressure, temperature, level and flow equipment, • The calibration engineer will undertake planned and preventative maintenance at customer sites across the UK for products such as flow meters, valves, sensors, gauges, microm...

Electrical Design Engineer - Hydrogen Test Facility and Test Rigs 12 Month Contract Based in Filton (60% On Site) Belcan are currently supporting one of the leaders in the Aviation industry with their search for an Electrical Design Engineer specialising in Hydrogen Test Facility and Test Rigs. This role is a 12 month contract, and will be based in Filton. You will join the Test Centre (1VM) and will contribute to the development of architectures and specifications for data acquisition and control systems for a new test facility and several new test rigs focused on Hydrogen testing. You can find some of the responsibilities below; Tasks & accountabilities Develop Architecture and design solutions for data acquisition and control systems. Develop Electrical Component electrical schematics Specify Instrumentation for a range of different measurements (Pressure, Flow, Voltage, Current, etc…) Produce requirement and specification documentation for data acquisition and control systems. Required skills Electrical Design Tools (AutoCAD, AutoCAD Electrical, KiCad) Understanding of Electrical design principles and Electrical systems Understanding of Testing principles Experience with electrical architecture design Experience with instrumentation, data acquisition and control systems. Knowledge of avionic data busses (A429, CAN, AFDX) This vacancy is being advertised by Belcan...

MERITUS are recruiting for an Electrical Design Engineer to join our client in an initial 11 month contract from their site in Filton to work on Hydrogen Test Rig projects. The role is likely to extend at requires 60% onsite presence. ELECTRICAL DESIGN ENGINEER - INSIDE IR35 - £50 PER HOUR - FILTON, UK (3 DAYS PER WEEK ONSITE) - 11 MONTHS (+LIKELY EXTENSION) - SINGLE STAGE INTERVIEW PROCESS - Sector: AEROSPACE A leading aerospace engineering organisation is seeking an Electrical Design Engineer to support the development of advanced test and integration capability within a next-generation aerospace technology environment. The role sits within a specialist engineering test organisation responsible for the development of electrical architectures, instrumentation systems and control solutions supporting complex engineering test facilities and experimental development programmes. The successful candidate will contribute to the design and integration of electrical systems for data acquisition, instrumentation and automated control environments associated with advanced propulsion and systems testing activities. This position requires a technically capable electrical engineer with experience in test systems, instrumentation integration and electrical architecture development within highly regulated engineering environments. Key Responsibilities • Develop electrical architectures ...

Earn great money working as an Electronic or Electrical Service Engineer to install, commission, fault find and repair instrumentation, and automation systems for the marine industry. Field based, but commutable to customers around the South West. We offer an excellent basic salary, lots of overtime and great earning potential for an Engineer who is happy to stay away across the UK on one to two week projects at a time. SALARY: Up to £65,000 BENEFITS: · Overtime on all work over 37 hours (with premium for weekend / bank holidays) · Company vehicle · Annual bonus · Holiday allowance which increases with overtime · Private healthcare · Pension. LOCATION: Cornwall / Devon COMMUTABLE LOCATIONS: Penzance, Newquay, Falmouth, Bude, Truro, Bodmin, Plymouth, Exeter, Taunton, Torquay, Crediton, Yeovil, Weymouth, Minehead, Bristol WHY SHOULD I APPLY?· We're a profitable and developing company. Now is a great time to join us! · Our generous overtime means you can earn an excellent salary. · Planned work! You'll know where you'll be, when, and for how long. Take control of your life and schedule. · Be part of a team of experts and become an expert yourself in a niche field. JOB SPECIFICATION: Electrical Engineer, Electronic Service Engineer : Instrumentation, PLC Control and Automation Systems - Marine I...

Electrical Design Engineer - contract £50.00 Per hour Umbrella 12 month contract - long term extension 3 days onsite per week in Filton, Bristol. A vacancy for an electrical design engineer has arisen in for our major aerospace client based in Filton. You will join the Test Centre (1VM) and will contribute to the development of architectures and specifications for data acquisition and control systems for a new test facility and several new test rigs focused on Hydrogen testing. Tasks & accountabilities Your main tasks and responsibilities will include: Develop Architecture and design solutions for data acquisition and control systems. Develop Electrical Component electrical schematics Specify Instrumentation for a range of different measurements (Pressure, Flow, Voltage, Current, etc…) Produce requirement and specification documentation for data acquisition and control systems. Required skills You will have the following skills and experience: Electrical Design Tools (AutoCAD, AutoCAD Electrical, KiCad) Understanding of Electrical design principles and Electrical systems Understanding of Testing principles Experience with electrical architecture design Experience with instrumentation, data acquisition and control systems. Knowledge of avionic data busses (A429, CAN, AFDX) Knowledge of avionics AMRT1_UKTJ ...

Electrical Design Engineer Filton (hybrid) £50per hour Initially until May 2027 1-stage interview virtual or F2F Flexible working hours Certain Advantage is collaborating with a prominent aerospace company in search of an experienced Electrical Design Engineer. In this role, you will join the Test Centre and will contribute to the development of architectures and specifications for data acquisition and control systems for a new test facility and several new test benches focused on Hydrogen testing. What you will be doing: • Develop Architecture and design solutions for data acquisition and control systems, • Develop Electrical Component and electrical schematics, • Specify Instrumentation for a range of different measurements (Pressure, Flow, Voltage, Current, etc.), • Produce requirement and specification documentation for data acquisition and control systems Your background: • Electrical Design Tools (AutoCAD, AutoCAD Electrical, KiCad), • Understanding of Electrical design principles and Electrical systems, • Understanding of Testing principles, • Experience with electrical architecture design, • Experience with instrumentation, data acquisition and control systems ...

Field Service Engineer / Water Treatment Engineer / Service Technician required to join a leading Water Treatment solutions provider. The successful Field Service Engineer / Water Treatment Engineer / Service Technician will be responsibvle for both Electrical and Mechanical maintenance, servicing, and repair of a variety of water / watewater treatment systems such as, Reverse Osmosis systems, Demineralisation systems, Water Softening Units, Ultrafiltration systems, Electro - Deionisation units, polymer dosing systems, as well as cartridge media and other related wastewater treatment equipment. The Field Service Engineer / Water Treatment Engineer / Service Technician will ideally have an engineering background, with some electrical experience, with experience working on and around water treatment systems and related components such as pumps, motros, valves, actuators, filters, UV systems, aeration systems, flow meters and instrumentation, chemical dosing systems, control systems, and related components. Package £35,000 - £40,000 depending on experience. Company vehicle. Overtime payments. Annual Bonus 25 days + Bank Holidays. Door to Door pay Pension. Additional benefits.Field Service Engineer / Water Treatment Engineer / Service Technician Role Be responsibvle for both Electrical and Mechanical maintenance, servicing, and repair of a variety of water / watewater treatment systems such as,...

Service Engineer Earn great money working as a Controls, Electronic or Electrical Service Engineer to install, commission, fault find and repair instrumentation, PLC control and automation systems for the marine industry. Field based but commutable to Bristol, Liverpool, Newcastle or Maldon in Essex, we offer an excellent basic salary, lots of overtime and great earning potential for an Engineer who is happy to stay away across the UK on one to two week projects at a time. SALARY: Up to £65,000 BENEFITS: · Overtime on all work over 37 hours (with premium for weekend / bank holidays) · Company vehicle · Annual bonus · Holiday allowance which increases with overtime · Private healthcare · Pension. LOCATION: Bristol, Newcastle upon Tyne, Liverpool or Maldon (Essex) COMMUTABLE LOCATIONS: Bath, Cheltenham, Gloucester, Weston Super Mare, Sunderland, Middlesbrough, Darlington, Warrington, Manchester, Chester, Chelmsford, Basildon, Colchester, Braintree, Bishop's Stortford, Dartford, Dagenham, Harlow, Haverhill, Southend on Sea WHY SHOULD I APPLY? · This is a growth position with a profitable and developing company. Now is a great time to join us! · Our generous overtime means you can earn an excellent salary. · Planned work! You'll know where you'll be, when, and for how long. Tak...

Our client has an opportunity for a Electrical Design Engineer to join them on a contract basis until May 2027 with possible extension. You will be joining the Test Centre and will contribute to the development of architectures and specifications for data acquisition and control systems for a new test facility and several new test rigs focused on Hydrogen testing. Role: Electrical Design Engineer - Hydrogen test facility and test rigs Location: Filton, 60% onsite Hours: 35 per hours Clearance: BPSS required before starting Hourly Rate: £50 per hour via Umbrella, inside IR35 What you'll be doing: Your main tasks and responsibilities will include: Develop Architecture and design solutions for data acquisition and control systems. Develop Electrical Component electrical schematics Specify Instrumentation for a range of different measurements (Pressure, Flow, Voltage, Current, etc…) Produce requirement and specification documentation for data acquisition and control systems.Requirements: Electrical Design Tools (AutoCAD, AutoCAD Electrical, KiCad) Design experience on industrial control systems Understanding of Electrical design principles and Electrical systems Understanding of Testing principles Experience with electrical architecture design Experience with instrumentation, data acquisition and control systems. Knowledge of avionic data busses (A429, CAN, AFDX) Electrical Design Tools (AutoCAD, AutoCAD E...

Astute's Nuclear Team is partnering with a leading engineering consultancy delivering complex projects across the defence and nuclear sectors to recruit a Electrical Nuclear Safety Engineer to support a portfolio of major nuclear projects across the UK, based out of their offices in Bristol or Gloucester. The strategically important Electrical Nuclear Safety Engineer role comes with a salary of £50,000 - £80,000, flexible hybrid working, private healthcare, bonus scheme, and excellent opportunities for professional development and career progression. If you're an Electrical Nuclear Safety Engineer and are looking to work for an organisation that delivers innovative engineering solutions across some of the UK's most complex and safety-critical nuclear programmes, then submit your CV to apply today. Responsibilities and duties of the Electrical Nuclear Safety Engineer role Reporting to the Nuclear Safety Team Leader you will: Deliver electrical engineering and nuclear safety support across a diverse range of nuclear projects. Develop and implement solutions to complex electrical power system and control & instrumentation (C&I) challenges. Undertake engineering assessments, design modification reviews, and safety justifications for nuclear facilities. Support hazard analysis, design basis assessments, probabilistic assessments, and safety functional requirement development. Conduct periodic reviews of safety f...

I am looking for a Maintenance Technician AND an Electrician for a civils contractor who produce cement. Based in Bristol one site. Maintenance Technician Job Spec: Experience in Electro-Mechanical field who can deal with electrical and mechanical components of industrial cement silo systems and have a dual skill set. Electrical Troubleshooting: Diagnosing and repairing low-voltage switchgear, variable frequency drives (VFDs), and control panels. Instrumentation Calibration: Testing and calibrating sensors like radar level gauges, pressure transmitters, and high/low level switches. * Experience: Hands-on background in heavy industry, manufacturing, or bulk material handling...

The Artistic Planning Director will work closely with NCO’s Music Librarian to ensure that all music, including commissions and arrangements, is thoroughly prepared and will give due consideration to specific instrumentation requirements ahead of activity. Work closely with the Music Librarian to

The successful applicant will join leading international researchers in the Organic Geochemistry Unit.Using established wet-chemistry protocols and state-of-the-art analytical instrumentation you will contribute to projects investigating the diet of human populations in the past.As a Research Techni

United Cerebral Palsy of Georgia is looking for an Electronic or Electrical Service Engineer to install, commission, and repair instrumentation and automation systems in the marine industry. Engineers should be comfortable with travel and staying away from home across the UK.

Amentum is looking for an Electrical Construction Supervisor in Bristol to oversee electrical and instrumentation works at Hinkley Point C. Applicants should have a degree in electrical engineering and experience in power plant construction.

Join the Fusion and Modular Nuclear Business Unit! The Process engineer will support the design of complex thermal and fluid systems for the SMR project. Design Development: Create and review Process Flow Diagrams, Piping & Instrumentation Diagrams, Layout Drawings, Component Sizing Calculations, an

United Cerebral Palsy of Georgia is seeking an Electronic or Electrical Service Engineer to install, commission, fault find, and repair instrumentation and automation systems for the marine industry.

Principal Electrical, Control and Instrumentation Engineer in Bristol. The engineer will oversee project teams, ensuring quality and compliance, while actively participating in technical direction. This full-time position involves leading complex engineering projects that support the UK's energy sec

Job Title: Senior Electrical Control and Instrumentation Engineer. At Cavendish Nuclear we're working to create a safe and secure world, together, and if you join us, you can play your part as aSenior Electrical Control and Instrumentation Engineer, at one of our main Cavendish sites. As a

We are seeking a highly skilled Senior Electrical, Control & Instrumentation (EC&I) Engineer for a 12-month contract position operating within IR35 regulations.

Assists in developing project plans, coordinating meetings, supporting documentation and quality control for Instrumentation & Control systems.

The Test Technician will undertake fault finding and diagnostics for an instrumentation business.

Earn great money working as an Electronic or Electrical Service Engineer to install, commission, fault find and repair instrumentation, and automation systems for the marine industry. Field based, but commutable to customers around the South West. We offer an excellent basic salary, lots of overtime and great earning potential for an Engineer who is happy to stay away across the UK on one to two week projects at a time. SALARY: Up to £65,000 BENEFITS: · Overtime on all work over 37 hours (with premium for weekend / bank holidays) · Company vehicle · Annual bonus · Holiday allowance which increases with overtime · Private healthcare · Pension. LOCATION: Cornwall / Devon COMMUTABLE LOCATIONS: Penzance, Newquay, Falmouth, Bude, Truro, Bodmin, Plymouth, Exeter, Taunton, Torquay, Crediton, Yeovil, Weymouth, Minehead, Bristol WHY SHOULD I APPLY? · We're a profitable and developing company. Now is a great time to join us! · Our generous overtime means you can earn an excellent salary. · Planned work! You'll know where you'll be, when, and for how long. Take control of your life and schedule. · Be part of a team of experts and become an expert yourself in a niche field. JOB SPECIFICATION: Electrical Engineer, Electronic Service Engineer : Instrumentation, PLC Control and Automation Systems - Marine Industry This is a field based Electronic / Electrical Service Engineer vacancy for a very well established and respected specialist in instrumentation, PLC control and automation systems to the marine industry. This role will be split between (80%) scheduled electrical / electronic installation, commissioning and refit projects - typically staying away for 10-14 days at sites across the UK - but with a heavy focus on customers around Falmouth / Devonport. The remainder (20%) will be reactionary fault finding and repair (1-2 day trips) on first and third party instrumentation, PLC controls and automation equipment or machinery. The majority of work will be in the UK, though you will work on international projects - perhaps 6 weeks per year and including trips to Gibraltar, UAE, Bahrain and USA. REQUIREMENTS: Electrical Engineer, Electronic Service Engineer : Instrumentation, PLC Control and Automation Systems - Marine Industry We require a practical, hands on Engineer with a track record as an electronic or electrical Service / Maintenance Engineer in an industrial setting. A good, practical grasp of electronic engineering is required. Any experience / familiarity with temperature, pressure & level measurement would be an advantage. As would, to a lesser extent, Allen Bradley and Siemens PLC Programming and Maintenance experience. You must be flexible and prepared to travel and stay away as required. THE COMPANY: We are a well established and recognised company - specialising in a niche field of Instrumentation, PLC Control and Automation Systems to the Marine Industry - with an excellent reputation. This role has come about as a result of our continued growth and development. PROSPECTS: Excellent earning potential in this role. We also have a track record of promoting from within where possible. It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Controls Engineer, Service Engineer, Maintenance Engineer, Electronic Engineer, Electrical Engineer, Process Engineer, Installation Engineer, Commissioning Engineer, Applications Engineer - Electrical, Electronic, Instrumentation, PLC Control Systems, Automation Systems, Marine Industry, Industrial Engineering, Automation, Siemens, Allen Bradley, Temperature, Pressure, Level Measurement Please Note - We have been selected as the exclusive retained partner for this role so any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: SP18470, Wallace Hind Selection TPBN1_UKTJ

Astute's Nuclear Team is partnering with a leading engineering consultancy delivering complex projects across the defence and nuclear sectors to recruit a Electrical Nuclear Safety Engineer to support a portfolio of major nuclear projects across the UK, based out of their offices in Bristol or Gloucester. The strategically important Electrical Nuclear Safety Engineer role comes with a salary of £50,000 - £80,000, flexible hybrid working, private healthcare, bonus scheme, and excellent opportunities for professional development and career progression. If you're an Electrical Nuclear Safety Engineer and are looking to work for an organisation that delivers innovative engineering solutions across some of the UK's most complex and safety-critical nuclear programmes, then submit your CV to apply today. Responsibilities and duties of the Electrical Nuclear Safety Engineer role Reporting to the Nuclear Safety Team Leader you will: Deliver electrical engineering and nuclear safety support across a diverse range of nuclear projects. Develop and implement solutions to complex electrical power system and control & instrumentation (C&I) challenges. Undertake engineering assessments, design modification reviews, and safety justifications for nuclear facilities. Support hazard analysis, design basis assessments, probabilistic assessments, and safety functional requirement development. Conduct periodic reviews of safety for operational nuclear facilities. Support qualification and substantiation activities to demonstrate compliance with safety requirements. Act as an engineering lead on complex nuclear projects where required. Develop and support safety cases for both nuclear and non-nuclear facilities. Author, review, and verify technical and safety-related documentation. Build and maintain strong client relationships whilst supporting project delivery and business growth. Mentor and support the development of junior engineers and consultants. Ensure projects are delivered to agreed quality, programme, and budget requirements. Professional qualifications We are looking for someone with the following: Demonstrable 5+ years of civil nuclear or defence nuclear infrastructure experience working on electrical and C&I engineering problems. A Degree, Master's or PhD in a relevant STEM subject. A willingness to travel and spend time on client sites. Experience working in highly regulated and/or high hazard industries. Technical oversight; leadership; and independent review. Experience in project management and commercial aspects. Technical consultancy experience. Ideally Chartered with a professional institution. Personal skills The Electrical Nuclear Safety Case Engineer role would suit someone who has: Well-developed organisational skills and demonstrated experience leading technical teams. Clear written and verbal communication skills. Adaptability and ability to manage your own workload. An appetite to continually learn, improve and stretch yourself. Adaptable and comfortable working across a variety of nuclear projects. Committed to continuous learning and professional growth. Salary and benefits of the Electrical Nuclear Safety Case Engineer role • Salary of £50,000 - £80,000 depending on experience. Flexible hybrid working arrangement. 25 days annual leave plus the option to purchase up to 5 additional days. Company bonus scheme linked to business performance. Additional benefits including private healthcare membership, enhanced parental leave benefits, life assurance, professional membership support and many more. #LI-GN1 INDNUC Astute People are acting as an employment agency in relation to this vacancy. We do not discriminate on the grounds of age, race, gender, disability, creed or sexual orientation and comply with all relevant UK legislation. We encourage applications from individuals from all backgrounds but candidates must be able to demonstrate their ability to work in the UK. Astute is also committed to the government's Disability Confident Employer initiative. We endeavour to get back to everyone, however, if you have not heard anything after 7 days, please consider your application unsuccessful. TPBN1_UKTJ

Our client is a global leader in scientific technology, providing chromatography solutions to customers across the petrochemical, energy, pharmaceutical, and environmental sectors. As part of their continued growth, we’re seeking an experienced Account Manager to join their team. As an Account Manager, you'll act as a trusted advisor to scientific clients across the UK & Ireland, understanding the scientific goals of your customers and tailoring solutions that support their workflows. You’ll engage with a mix of existing accounts and new prospects, supported by an established brand and product reputation. This role suits a salesperson who is driven, and naturally comfortable engaging with technical stakeholders. You should enjoy asking questions, understanding challenges, and recommending meaningful solutions, take pride in your work and value relationships built on trust, not just transactions. To be considered for this role you will have: • Proven Scientific instrument sales experience, ideally with strong technical experience of relevant techniques (Chromatography preferred), • Account management experience and the ability to identify and convert new business opportunities, • Excellent communication skills and the ability to engage with senior technical and commercial stakeholders, • Experience working towards and achieving targets, • UK Drivers Licence and the willingness to travel, • Right to work in the UK without sponsorship The role offers a competitive basic salary, plus uncapped commission with realistic OTE of 20% on top. Additional perks include a company car or allowance, private healthcare, pension, and strong learning and development resources. Sound like a good fit? Send your CV or drop us a message to learn more. We’re happy to talk through the details and see if this could be the right next step in your career. Keywords: account management, sales manager, sales lead, business development manager, business development, sales representative, sales specialist, scientific sales, scientific sales representative, account executive, mass spectrometry, chromatography, LC-MS, GC-MS, capital instrumentation, reagents, software, consumables, UK, Ireland, Scotland, Wales, Manchester, London, Birmingham, Edinburgh, Liverpool, Leeds, Cambridge, Oxford, Glasgow, VRS9393PC

Technical Sales Engineer - Materials Testing Instrumentation Mechatronic Capital Equipment - South England and South Wales Candidate Location - M4 Corridor: Bristol, Swindon, Bath, Gloucester, Reading, Slough £40,000 - £60,000 Basic Salary + Company Vehicle / Car Allowance + Credit Card + £10k - 20k OTE (uncapped) + Benefits Do you enjoy technical/capital equipment sales? Are you interested in the engineering sector? Are you sales motivated with a consultative approach? Fantastic opportunity to work for a market leading company selling a range of materials testing capex.Our client is a reputable and recognisable supplier of metrology and materials testing equipment. They're looking for somebody who has some prior capital equipment sales experience to enter a truly unique sector. Your Role as an Technical Sales Engineer A field-based area sales management role covering a territory of South England and South Wales 70% account management with an amount (30%) of new business. Selling a range of materials testing systems into academic institutions and end users within a host of engineering disciplines. A consultative, solutions focused sales process. Longer sales cycles (2 - 18+ months) and order values between £40k up to £500k+. The role involves an amount of travel across the territory, including Germany 2 - 3 times per year. Occasional overnights; typically, around 3 per month.The Ideal Background for the Technical Sales Engineer Familiar with electrical, mechanical, or mechatronic engineering principles. Commercial awareness and able to have technical sales conversations with clients. You need to have capital equipment sales knowledge into the engineering, industrial, manufacturing, defence, medical, aerospace, automotive, or motorsport sectors. Sales driven and enjoy being customer facing. Hold a full valid UK driving licence. Hold a valid passport Have right to work in the UK as sponsorship can't be provided.The Company recruiting for Technical Sales Engineer This forward-thinking and growing company is a true recognisable force across 20+ different engineering sectors and disciplines. Being established for over 150 years, they pride themselves on the quality of their equipment and service offering. You have an opportunity to join this technologically advanced business as they look to expand their sales team. In return for your experience, they can offer a very rewarding career and benefits package.The Package for the Technical Sales Engineer £40,000 - £60,000 basic salary, D.O.E (Scope for more with industry sales experience) £10k - £20k OTE (Uncapped) Expensed company car or £450pcm car allowance Credit Card Pension, Mobile, Laptop Enhanced sick pay On-going manufacturers training 25 days holiday plus statsPlease apply for this job online if you are interested and feel you fit the above criteria. Dave is the main point of contact for the role

Company Description Today, Assystem is among the top three independent nuclear engineering firms worldwide. With over 60 years of experience in highly regulated sectors, the group supports public and industrial stakeholders in the execution of complex and strategic infrastructure projects, subject to high safety and security requirements. Assystem mobilizes 8,000 experts in 13 countries and intervenes across the entire project lifecycle, in engineering, project management and digital solutions. Job Description The Role: Reporting to the Turbine Island Lead, the Senior Mechanical Design Engineer will be responsible for developing fluid systems. The Senior Mechanical Design Engineer shall work closely with multi-disciplined teams and the supply chain to help deliver the system design. Key Responsibilities: Develop 2D CAD drawings, including process flow diagrams (PFD) and process and instrumentation diagrams (P&ID). Prepare 3D CAD/BIM models, plant layouts, piping design, isometrics, MTO, general arrangement drawings, detail drawings and sketches. Perform layout optimisation engineering across design phases. Participate to 3D model reviews, layout reviews, design reviews and technical meetings. Ensure compliance with required design safety factors, tolerances, specifications, standards, codes, legislation and requirements. Collaborate with multi-disciplinary engineering teams to ensure a coordinated design. Maintain records of design process in accordance with sound design practices Maintain and update databases for CAD/BIM design documentation. Report status and updates to management line Support team and maintain required standards and expectations. Meet targets, quality, time and budget constraints. Support and mediate solutions and issues with resolution with all stakeholders being aligned. Ensure adherence to the company statutory H&S Policies and rules and compliance with the project and QualityWhy Join the Community of Switchers? Over 55 years in nuclear engineering. Ranked among the top 3 largest nuclear engineering companies. Attractive social benefits, including an engaging Employee Committee and holiday bonuses. Ongoing training with numerous career opportunities. 70% of our managers are promoted internally! Hybrid work: 1-2 days remote per week. Qualifications Essential Skills, Qualifications and Experience: Previous experience as a Mechanical Design Engineer or a similar role Ability to work within the engineering team to realise designs Familiarity with 2D CAD systems (AutoCAD) for drawing creation Familiarity with 3D CAD/BIM systems (Revit, Inventor, Solidworks, Solid Edge, Siemens NX, PDMS, AutoCAD Plant 3D or similar) for model and drawing creation Professional qualification in an engineering related field SC Clearance or capable of achieving it Personal Specification/Attributes: Good communication skills, written and oral Focus on delivering quality output to time and budget Act with integrity and instils this in others Ability to work with a good degree of independence, using their own initiative and self-motivation Flexible, agile to the role needs, to maintain delivery targets Confident in being suggestive to alternative solutions that provide safety, time, cost and quality solutions Team player Ability to manage own time and to deliver within agreed timescales Additional Information Security clearance: Due to the nature of work to be undertaken applicants will be required to meet certain residency criteria in order to attain a minimum level of UK security clearance if not already security cleared to a minimum SC level. We are committed to equal treatment of candidates and promote, as well as foster all forms of diversity within our company. We believe that bringing together people with different backgrounds and perspectives is essential for creating innovative and impactful solutions. Skills, talent, and our people’s ability to dare are the only things that matter !. Bring your unique contributions and help us shape the future. NOTICE TO CANDIDATES ON RECRUITMENT FRAUD - We are committed to safeguarding candidates from fraudulent activity associated with our recruitment process. Please note that we will never offer specialist CV writing services, request payment or ask for sensitive personal information during the recruitment process. We are committed to equal treatment of candidates and promote, as well as foster all forms of diversity within our company. We believe that bringing together people with different backgrounds and perspectives is essential for creating innovative and impactful solutions. Skills, talent, and our people’s ability to dare are the only things that matter !. Bring your unique contributions and help us shape the future

Mobile Service Technician Medical Device & Bio-Decontamination Systems Location: Bristol (covering South Wales & Southwest England) Ideal Locations - Bristol, Swindon, Western-Super-Mere, Cheltenham, Newport Salary: £35,000 - £40,000 + Bonus + Company Van Hours: Monday to Friday | 8:00am - 5:00pm Join a Growing Technical Service Team We are looking for a technically skilled and customer-focused Mobile Service Technician to support the installation, maintenance, calibration, and repair of specialist bio-decontamination and infection control equipment used within healthcare, pharmaceutical, laboratory, and cleanroom environments. This is an excellent opportunity for an electro-mechanical engineer or field service technician looking to work with advanced medical and process-controlled equipment involving instrumentation, airflow systems, sensors, ultrasonic technology, and automated safety systems. The role is field-based, covering South Wales and the South West of England, providing on-site technical support to customers across NHS, healthcare, life science, and regulated environments. Full training provided prior to starting the role,. The Role As a Mobile Service Technician, you will be responsible for ensuring equipment operates safely, reliably, and in compliance with customer and regulatory requirements. You will carry out preventative maintenance, fault diagnosis, calibration, servicing, and breakdown repairs on specialist decontamination systems utilising: Ultrasonic vaporisation technology Hydrogen peroxide delivery systems Airflow and catalytic deactivation systems Embedded control electronics Process sensors and safety interlocks HMI/touchscreen control interfaces You will also provide technical training to customers, support equipment installations, and maintain accurate service documentation and calibration records. Key Responsibilities Perform planned preventative maintenance (PPM) and servicing on electro-mechanical decontamination equipment Diagnose and repair faults involving: Pumps, motors, fans, valves, and relays Sensors and process-monitoring systems Ultrasonic atomisation systems Power supplies and control electronics HMI/touchscreen interfaces Safety interlocks and alarm systems Carry out electrical fault-finding using multimeters and diagnostic tools Inspect and calibrate humidity, airflow, and process sensors Conduct leak testing, tubing inspections, and airflow performance checks Support installation, commissioning, and validation activities Ensure compliance with preventative maintenance schedules and service level agreements (SLAs) Deliver operator training and refresher sessions for customers Maintain accurate service reports, calibration records, and maintenance logs Provide technical feedback on recurring faults and product performance trends Support equipment swap-outs and emergency breakdown response where required Ensure all work complies with company QHSES procedures and customer site requirementsRequirements Technical Skills & Experience Essential Minimum 2 years' experience in a field service, maintenance, or electro-mechanical engineering role Strong electro-mechanical fault-finding experience Understanding of: Motors, pumps, fans, valves, relays, and sensors AC mains systems (Apply online only)V) Electrical testing and diagnostics Mechanical assemblies and moving systems Experience using multimeters and diagnostic equipment Ability to work independently and manage field-based responsibilitiesDesirable Experience Candidates with experience in any of the following areas are highly desirable: Medical devices or biomedical engineering Infection prevention or decontamination systems HVAC, airflow, or ventilation systems Instrumentation and control systems Cleanroom or pharmaceutical environments Process automation or industrial controls Embedded systems or HMI diagnostics Calibration and validation procedures Electrical safety testing (PAT) Hydrogen peroxide vapour (HPV) systems Healthcare or GMP-regulated environmentsIdeal Backgrounds We welcome applications from candidates with backgrounds such as: Field Service Engineer Biomedical Engineer Electro-Mechanical Technician Medical Device Engineer HVAC Controls Engineer Instrumentation Technician Industrial Maintenance Engineer Pharmaceutical Equipment Engineer Decontamination Systems EngineerBenefits Competitive salary (£35,000 - £40,000) Performance bonus scheme Company van and tools provided 25 days holiday + bank holidays Monday to Friday working pattern Ongoing technical training and development Opportunity to work with advanced healthcare technology Supportive and growing technical team Long-term career progression within a rapidly expanding business Full training for you to confidently carry out the role Working with a company that care, and really appreciates their employeesIND25

Field Service and Calibration Engineer - Materials Testing Materials Testing & Load Cell Systems - South West England Bristol, Gloucester, Swindon, Bath £35,000 - £45,000 Basic Salary + Vehicle + Benefits + Bonus Are you an experienced service engineer on materials testing equipment or load cell integrated systems? Or do you have knowledge of materials testing in a lab and looking to get into a field service role?Read on for the opportunity to join this organisation; a prestigious, respected company. A place where you can grow and develop. Your Role as a Field Service and Calibration Engineer: You'll be field based, predominantly covering a region but with further UK travel as needed. You will be responsible for the service, maintenance, and repair of this testing equipment and instrumentation. Examples include impact, tensile, universal, fatigue, stress, or torsion testing. You will be working within a variety of appealing manufacturing sectors including the aerospace, automotive, and medical industries, amongst others. You will play an important role in ensuring the equipment is correctly calibrated and maintained to UKAS standards. Compile detailed reports as appropriate. The field-based nature of the role will require nights away from home; on average of 1 - 2 per week.Ideal Background for the Field Service and Calibration Engineer: Knowledge of one of the following is essential: Materials Testing equipment, either as a current service engineer, or as somebody using the machinery in a lab. Specifically on impact, tensile, universal, fatigue, stress, or torsion testing. Service and calibration knowledge of load cells and connected systems such as checkweighers, weighbridges, or similar. A strong engineering understanding is essential in mechanical, electrical, and fluid disciplines. Approachable, honest, and a team player. Strong IT and communication skills. Hold a full valid UK driving licence and have right to work in the UK as sponsorship can't be provided.The Client recruiting for the Field Service and Calibration Engineer: Fastest growing company in their industry. Excellent training, support, and ongoing opportunities. Work with a varied client base in Research, Automotive, Aerospace, General Manufacturing, and Rail sectors. "Recruit for attitude, train for skill" Trusted by testing laboratories, scientists, and engineers nationally.The Package for the Field Service and Calibration Engineer: £35,000 - £45,000 basic salary, depending on experience Annual company performance related bonus Pension at 5% from company, 3% employee Company van, tools, laptop & phone Continuous development and training 25 days holiday plus statutory holidays.Apply online now if you fit the above criteria and are eager to grow. Dave is the main point of contact for this role. INDENG

Materials Testing Technician - Field Based Destructive Materials Testing Systems - South West England Bristol, Gloucester, Swindon, Bath £30,000 - £40,000 Basic Salary + Vehicle + Benefits + Bonus Do you have knowledge of materials testing in a lab and looking to get into a field service role? Perhaps you've wondered how the testing rigs function and have been a bit envious of the service engineers?Read on for the opportunity to join this organisation; a prestigious, respected company. A place where you can grow and develop. Your Role as a Materials Testing Technician: You'll be field based, predominantly covering a region but with further UK travel as needed. You will be responsible for the service, maintenance, and repair of this testing equipment and instrumentation. Examples include impact, tensile, universal, fatigue, stress, or torsion testing. You will be working within a variety of appealing manufacturing sectors including the aerospace, automotive, and medical industries, amongst others. You will play an important role in ensuring the equipment is correctly calibrated and maintained to UKAS standards. Compile detailed reports as appropriate. The field-based nature of the role will require nights away from home; on average of 1 - 2 per week.Ideal Background for the Materials Testing Technician: Knowledge of destructive Materials Testing equipment is essential, specifically on impact, tensile, universal, fatigue, stress, or torsion testing is mandatory. Approachable, honest, and a team player. A strong understanding of ISO/IEC 17025 would be beneficial. A genuine interest in becoming a field-based service and calibration engineer on materials testing rigs. Strong IT and communication skills. Hold a full valid UK driving licence and have right to work in the UK as sponsorship can't be provided.The Client recruiting for the Materials Testing Technician: Fastest growing company in their industry. Excellent training, support, and ongoing opportunities. Work with a varied client base in Research, Automotive, Aerospace, General Manufacturing, and Rail sectors. "Recruit for attitude, train for skill" Trusted by testing laboratories, scientists, and engineers nationally.The Package for the Materials Testing Technician: £30,000 - £40,000 basic salary, depending on experience Annual company performance related bonus Pension at 5% from company, 3% employee Company van, tools, laptop & phone Continuous development and training 25 days holiday plus statutory holidays.Apply online now if you fit the above criteria and are eager to grow. Dave is the main point of contact for this role. INDENG