Trabajos challenge manufacturing en Hicksville, New YorkCrear alertas

Job Description The Process Engineer is responsible for developing, maintaining, and improving configuration processes and operational work instructions used in the provisioning and deployment of IoT devices. This role creates and manages device configuration workbooks, supports manufacturing and operations teams, and ensures quality standards are consistently met through process adherence, First Article Inspections (FAIs), audits, and continuous improvement initiatives. This position works cross-functionally with Operations, Engineering, Quality, Supply Chain, and Customer Support teams to ensure accurate, scalable, and compliant device configuration processes. CORE ACCOUNTABILITIES Process Engineering & Device Configuration • Develop, maintain, and optimize configuration workbooks, process documentation, and work instructions for IoT device provisioning and deployment • Translate technical product requirements into clear operational procedures and configuration workflows, • Support configuration activities including firmware loading, SIM provisioning, network setup, labeling, serialization, and customer-specific programming requirements • Collaborate with Engineering and Product teams to implement new product introductions (NPI) and process changes • Identify opportunities to improve configuration efficiency, reduce errors, and streamline workflows, • Assist in troubleshooting device configuration issues and support root cause analysis activities, • Maintain process version control and ensure documentation accuracy across manufacturing and operations environments Quality & Compliance • Ensure configuration workbooks and operational procedures are consistently followed by production and operations teams • Conduct process audits and monitor adherence to established quality standards and work instructions, • Support First Article Inspections (FAIs) for new products, configuration changes, or process updates, • Assist with internal, customer, and external audits by preparing documentation and supporting corrective actions, • Participate in CAPA, nonconformance investigations, and continuous improvement initiatives, • Monitor quality metrics and support implementation of corrective and preventive actions, • Help maintain compliance with ISO, customer, and regulatory requirements where applicable Cross-Functional Collaboration • Partner with Manufacturing, Supply Chain, Quality, and Technical Support teams to ensure successful device deployment and operational readiness • Provide training and guidance on configuration processes and documentation updates, • Support scaling of configuration operations for new customers, products, and global deployments QUALIFICATIONS Required Qualifications -Bachelor’s degree in Engineering, Manufacturing, Industrial Technology, Supply Chain, or related field preferred -2–5 years of experience in process engineering, manufacturing engineering, quality engineering, or technical operations -Experience working with IoT devices, electronics manufacturing, or technical configuration environments preferred -Knowledge of process documentation, work instructions, and manufacturing workflows -Familiarity with quality systems, audits, and First Article Inspection (FAI) processes -Strong analytical, troubleshooting, and organizational skills -Proficiency with Microsoft Excel and process documentation tools -Experience with ERP, MES, or quality management systems is a plus Preferred Qualifications -Experience supporting ISO 9001 or similar quality management systems -Knowledge of Lean Manufacturing and continuous improvement methodologies -Familiarity with cellular connectivity, firmware management, or embedded devices -Experience in high-mix, low-volume manufacturing or device provisioning environments Key Skills -Process improvement -Attention to detail -Technical documentation -Quality assurance -Root cause analysis -Cross-functional collaboration -Problem-solving -Time management OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. WORK ENVIRONMENT -Manufacturing, operations, or technical production environment -Combination of desk-based process documentation and hands-on operational support -Collaboration with internal teams, suppliers, and external auditors as needed WORKING CONDITIONS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to remain stationary; move; lift, push, pull and/or move up to 15 pounds. The employee must regularly sit; use hands to finger, handle, or feel; reach with hands and arms; communicate. Specific vision abilities required by this job include close vision. VISION To be the trusted global leader in IoT Connectivity Solutions for over 100,000,000+ connected devices, enabling a smarter, more connected world for all. MISSION To empower our customers to deliver transformative solutions that deliver impactful outcomes to the communities and customers they serve. KORE VALUES Customer Obsession We earn trust through deep understanding and relentless commitment. We earn the trust of our customers and aim to delight them through our solutions – we want to be loved by our customers. Be the Spark We lead with energy, creativity, and urgency. We don't wait for change – we ignite it. We listen, engage, and encourage others to participate. Own the Outcome We take accountability seriously – delivering on our promises to customers, teammates, and ourselves. We finish what we start. We think like owners and we’re frugal where it makes sense. Grit & Positivity We face challenges head-on – with resilience, optimism, and determination. We look at these situations as an opportunity to create a positive outcome. When we make a commitment, we deliver. We challenge those in a respectful way that do not meet their commitments. Challenge. Debate. But Be Human. We speak up, question assumptions, and challenge ideas – not people. We aim for the best outcomes through respectful, direct, and open dialogue, keeping in mind we’re all on the same team. KORE Wireless Group, Inc., is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of any kind. KORE is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at KORE are based on business needs, job requirements and individual qualifications, without regard to race, color, religion, or belief, national, social, or ethnic origin, sex (including pregnancy), age physical, mental or sensory disability, HIV Status, sexual orientation, gender identify and/or expression, marital, civil union, or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. KORE will not tolerate discrimination or harassment based on any of these characteristics.

Job Description The Sr. Manager, IoTMS Operations leads all operational activities within KORE’s Westbury, NY IoT device configuration and production facility, overseeing production, quality, inventory, logistics, engineering coordination, and continuous improvement initiatives. This role is responsible for ensuring efficient, scalable, and customer-focused operations that deliver high-quality configured IoT devices on time and within budget. The Sr. Manager, IoTMS Operations drives operational excellence across device staging, firmware loading, provisioning, testing, kitting, packaging, and fulfillment processes while supporting rapid growth, evolving customer requirements, and technology integration. CORE ACCOUNTABILITIES Operational Leadership • Direct and oversee daily operations of the IoT device configuration and fulfillment facility., • Develop operational strategies to improve efficiency, scalability, quality, and profitability., • Establish and monitor operational KPIs, productivity goals, and service-level agreements (SLAs)., • Ensure production schedules and customer delivery commitments are consistently met., • Lead cross-functional coordination between operations, engineering, sales, procurement, customer success, and quality teams. Production & Configuration Management • Oversee all device configuration processes, including:, • Firmware loading and validation, • Device provisioning and activation, • SIM management, • Network and connectivity testing, • Customer-specific software/application configuration, • Serialization and asset tracking, • Optimize production workflows for throughput, accuracy, and traceability., • Implement scalable operational processes to support increasing order volumes and product diversity., • Ensure proper staffing, scheduling, and resource allocation across production operations. Quality & Compliance • Ensure adherence to quality standards and customer specifications throughout the production lifecycle., • Oversee quality assurance programs, inspection processes, and corrective action procedures., • Support compliance with:, • ISO 9001 or related quality systems, • ESD handling procedures, • Customer contractual requirements, • Regulatory and safety standards, • Review operational metrics and customer feedback to drive continuous quality improvement. Supply Chain & Inventory Oversight • Manage inventory control processes for devices, accessories, SIM cards, and production materials., • Coordinate with procurement and suppliers to maintain material availability and reduce shortages., • Improve inventory accuracy, warehouse organization, and material flow efficiency., • Oversee shipping, receiving, and fulfillment operations to ensure accurate and timely delivery. Financial & Strategic Management • Develop and manage operational budgets, labor planning, and cost-control initiatives., • Analyze operational performance data to identify trends, risks, and opportunities., • Support executive leadership with forecasting, capacity planning, and strategic growth initiatives., • Evaluate and implement automation technologies, software systems, and operational tools to improve scalability. Team Leadership & Development • Lead, mentor, and develop operations managers, supervisors, quality personnel, and production staff., • Foster a culture of accountability, collaboration, safety, and continuous improvement., • Establish training programs and operational standards for production teams., • Conduct performance reviews and succession planning for operational leadership roles. Process Improvement & Technology Integration • Lead Lean Manufacturing, Six Sigma, or continuous improvement initiatives., • Identify operational bottlenecks and implement process optimization strategies., • Collaborate with engineering and IT teams on: -MES/ERP system improvements -Automation initiatives -Production data collection -Traceability systems • Standardize workflows and documentation across production operations. QUALIFICATIONS Required Qualifications • Bachelor’s degree in Operations Management, Supply Chain, Manufacturing, Business Administration, or related field., • 7–10+ years of operations leadership experience in manufacturing, electronics, technology, or IoT environments., • Experience managing production operations with customer-specific configuration or assembly processes., • Strong knowledge of manufacturing operations, quality systems, and supply chain management., • Experience leading cross-functional operational teams in a fast-paced environment., • Proven track record of improving operational efficiency and scalability. Preferred Qualifications • Experience in IoT device manufacturing, device provisioning, telecommunications, or electronics configuration services., • Knowledge of: -Firmware deployment processes -Device lifecycle management -Cellular/network-connected devices -Serialization and traceability systems • Experience with ERP, MES, WMS, or production management systems., • Lean Manufacturing or Six Sigma certification preferred., • MBA or advanced operations/engineering degree is a plus. Key Skills -Operational strategy -Production management -Supply chain oversight -Quality systems management -Leadership and team development -Process optimization -Budget management -Data analysis and KPI management -Customer operations support -Continuous improvement -Change management OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. WORK ENVIRONMENT -Combination of office, warehouse, and production floor environments. -Frequent interaction with production staff, customers, suppliers, and executive leadership. -May require occasional travel to customer sites, suppliers, or partner facilities. -Fast-paced operational environment with evolving customer requirements and production priorities. WORKING CONDITIONS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to remain stationary; move; lift, push, pull and/or move up to 15 pounds. The employee must regularly sit; use hands to finger, handle, or feel; reach with hands and arms; communicate. Specific vision abilities required by this job include close vision. VISION To be the trusted global leader in IoT Connectivity Solutions for over 100,000,000+ connected devices, enabling a smarter, more connected world for all. MISSION To empower our customers to deliver transformative solutions that deliver impactful outcomes to the communities and customers they serve. KORE VALUES Customer Obsession We earn trust through deep understanding and relentless commitment. We earn the trust of our customers and aim to delight them through our solutions – we want to be loved by our customers. Be the Spark We lead with energy, creativity, and urgency. We don't wait for change – we ignite it. We listen, engage, and encourage others to participate. Own the Outcome We take accountability seriously – delivering on our promises to customers, teammates, and ourselves. We finish what we start. We think like owners and we’re frugal where it makes sense. Grit & Positivity We face challenges head-on – with resilience, optimism, and determination. We look at these situations as an opportunity to create a positive outcome. When we make a commitment, we deliver. We challenge those in a respectful way that do not meet their commitments. Challenge. Debate. But Be Human. We speak up, question assumptions, and challenge ideas – not people. We aim for the best outcomes through respectful, direct, and open dialogue, keeping in mind we’re all on the same team. KORE Wireless Group, Inc., is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of any kind. KORE is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at KORE are based on business needs, job requirements and individual qualifications, without regard to race, color, religion, or belief, national, social, or ethnic origin, sex (including pregnancy), age physical, mental or sensory disability, HIV Status, sexual orientation, gender identify and/or expression, marital, civil union, or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. KORE will not tolerate discrimination or harassment based on any of these characteristics.

Job Description Controller Melville, NY Our client, a large and rapidly growing international manufacturing corporation, is looking to hire a Controller for their organization. If you have prior Controllership experience in the manufacturing or distribution field, this could be a great next step for you! The company is experiencing strong growth and in need of someone that can help them to evaluate and improve upon their current controls and procedures. This is a great opportunity to join a highly successful, stable corporation, but one that can also offer continued growth and professional challenge. They work a hybrid office schedule and are offering a salary in the range of $225,000 to $250,000 plus bonus, robust benefits, etc. Responsibilities for the Controller job include: • Reporting to the CFO, you will manage accounting and reporting for the company, • Heavy involvement in month/quarterly/year end close, workpapers, reconciliations, etc., • Manage a team of 7, • Maintain complex industry and GAAP compliance, • Strive to constantly improve processes procedures, • Involvement in acquisition evaluation and integration, • Liaise with and support external auditorsQualifications:, • Bachelor's degree in Accounting and an active CPA license is required, • 10+ years of public/private accounting experience required, • 5+ years of management experience required, • Must come out of a manufacturing/distribution background, • Proactive style, constantly looking for improvement, cost saving opportunities, • Strong communication skills and ability to work well with company executivesIf you would like to be considered for this Controller position or any other position posted by LHH, please email your resume to Erik.Hansen@ lhh.com or you can visit our web site at www.lhh.com . Pay Details: $225,000.00 to $250,000.00 per year Search managed by: Erik Hansen Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.lhh.com/us/en/candidate-privacy The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance OrdinanceMassachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job Description The Import/Export Specialist is responsible for coordinating international shipments and ensuring compliance with global trade regulations for wireless and IoT device configuration operations. This role manages import/export documentation, customs compliance, device shipping logistics, and coordination with carriers, freight forwarders, customs brokers, and internal operational teams. The specialist supports the movement of configured wireless devices, SIM-enabled equipment, accessories, and related materials across global markets while ensuring accuracy, efficiency, and compliance with applicable trade and regulatory requirements. CORE ACCOUNTABILITIES Import/Export Operations • Coordinate domestic and international shipments of wireless and IoT devices, components, SIM cards, and accessories • Prepare and review shipping documentation including commercial invoices, packing lists, bills of lading, certificates of origin, and customs declarations • Ensure import/export compliance with U.S. and international trade regulations, customs requirements, and company policies • Coordinate with freight forwarders, customs brokers, carriers, and warehouse partners to ensure timely shipment delivery and customs clearance • Monitor shipment status, proactively resolve delays, and communicate updates to internal stakeholders and customers • Manage Harmonized Tariff Schedule (HTS) classifications and maintain accurate import/export records, • Support temporary imports, returns, repairs, and international device replacement logistics as needed, • Ensure proper labeling, serialization, and export documentation for configured wireless devices Wireless Device Configuration Support • Collaborate with Operations and Device Configuration teams to align shipping schedules with production and customer delivery timelines • Verify shipment accuracy for configured devices, customer-specific configurations, and serialized inventory, • Support global deployment projects and customer onboarding activities, • Coordinate international movement of test devices, demo equipment, and engineering samples Compliance & Quality Responsibilities • Maintain compliance with trade regulations, export controls, sanctions programs, and customs requirements, • Assist with audits related to import/export compliance, shipping records, and operational processes, • Maintain accurate documentation and records retention in accordance with company and regulatory requirements, • Support continuous improvement initiatives related to shipping accuracy, cost reduction, and operational efficiency, • Participate in root cause analysis and corrective actions for shipment discrepancies or compliance issues QUALIFICATIONS Required Qualifications -Associate’s or Bachelor’s degree in Supply Chain, International Business, Logistics, Business Administration, or related field preferred -2–5 years of experience in import/export operations, logistics, supply chain, or international shipping -Experience supporting electronics, wireless devices, IoT hardware, or technical products preferred -Knowledge of international shipping documentation, customs procedures, Incoterms, and HTS classifications -Familiarity with export compliance regulations and trade documentation requirements -Strong organizational skills and attention to detail -Ability to manage multiple priorities in a fast-paced operational environment -Proficiency with Microsoft Office Suite, particularly Excel Preferred Qualifications -Experience working with freight forwarders, customs brokers, and global carriers -Knowledge of wireless devices, SIM provisioning, or electronics manufacturing environments -Experience with ERP, WMS, or logistics management systems -Certified Customs Specialist (CCS) or related trade certification preferred -Familiarity with ISO quality systems or regulated operational environments Key Skills -International logistics coordination -Regulatory compliance -Attention to detail -Problem-solving -Communication and collaboration -Process improvement -Time management -Customer focus OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. WORK ENVIRONMENT -Office, warehouse, or device operations environment -Frequent coordination with global suppliers, logistics providers, and internal operations teams -Fast-paced environment supporting customer delivery timelines and international shipments -May require occasional after-hours support for international shipment issues or deadlines WORKING CONDITIONS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to remain stationary; move; lift, push, pull and/or move up to 15 pounds. The employee must regularly sit; use hands to finger, handle, or feel; reach with hands and arms; communicate. Specific vision abilities required by this job include close vision. VISION To be the trusted global leader in IoT Connectivity Solutions for over 100,000,000+ connected devices, enabling a smarter, more connected world for all. MISSION To empower our customers to deliver transformative solutions that deliver impactful outcomes to the communities and customers they serve. KORE VALUES Customer Obsession We earn trust through deep understanding and relentless commitment. We earn the trust of our customers and aim to delight them through our solutions – we want to be loved by our customers. Be the Spark We lead with energy, creativity, and urgency. We don't wait for change – we ignite it. We listen, engage, and encourage others to participate. Own the Outcome We take accountability seriously – delivering on our promises to customers, teammates, and ourselves. We finish what we start. We think like owners and we’re frugal where it makes sense. Grit & Positivity We face challenges head-on – with resilience, optimism, and determination. We look at these situations as an opportunity to create a positive outcome. When we make a commitment, we deliver. We challenge those in a respectful way that do not meet their commitments. Challenge. Debate. But Be Human. We speak up, question assumptions, and challenge ideas – not people. We aim for the best outcomes through respectful, direct, and open dialogue, keeping in mind we’re all on the same team. KORE Wireless Group, Inc., is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of any kind. KORE is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at KORE are based on business needs, job requirements and individual qualifications, without regard to race, color, religion, or belief, national, social, or ethnic origin, sex (including pregnancy), age physical, mental or sensory disability, HIV Status, sexual orientation, gender identify and/or expression, marital, civil union, or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. KORE will not tolerate discrimination or harassment based on any of these characteristics.

Job Description Looking for inside sales and customer service as well as clerical work position. Position involves price quotes, product information, literature, follow-ups, and order processing. Ability to resolve problems and multitask is pertinent. We manufacture medicine cabinets and supply bath accessories to distributors and general contractors throughout the USA, any experience dealing with this type of work will be helpful. Mechanical understanding is also helpful to explain product line to customers. A pleasant phone voice will be important since answering phones as well as doing follow-up calls to try and close orders. Summary of Qualifications: • Highly motivated, computer literate, • MS Office, • Outlook, • Access knowledge is helpful, • Experience in Stack or similar construction estimating software is helpful, • Experience in ConstructConnect construction bidding software is helpful, • Customer service experience, • Proficient in math, • Exposure to wholesale and construction industry, • Exposure to architectural and blue print documents, • A fast learner who is not afraid of a challenge and can handle pressure, with the ability to multi task, • History of stable employment and looking for long term employment a must, • Be able to work independently, • Good attendance and being on time is required Daily Activities: Price Quotations Gather job & contact name, shipping & delivery information and architect information requirements needed to: • Leverage ConstructConnect online platform to identify, track, and analyze new construction project opportunities, • Prepare quotations, • Revise quotations already entered in Access, • Cross-reference products to BASCO part numbers where necessary, • Enter quotation information into Access, • Evaluate accurate follow-up date and enter in Access, • Prepare project folder for multiple or BASCO specified quotations, • Send out invitation letters to architects Order Entry • Prepare submittal package for HFA (Hold For Approval) orders, • Check submittal package when returned for changes or requoting, • Review purchase order for accuracy on parts, and pricing, • Check delivery address zip code, • Acknowledge Receipt and delivery information to customer, • Check order against quotation (if applicable), • Prepare purchase order for drop shipments when required, • Prepare job folder for filing when necessary Follow-up Calls: • Search for bidder information when multiple follow-ups arise, • Follow-up on quotes on a daily basis, reevaluate for next follow-up, • Email requests when no response by telephone and reenter next follow-up date, • Review and pull any quotes to be killed when necessary, • Review BASCO specified quotes if killed and give to authorized individual for extra follow-up, • Follow up for reasons why Basco was not chosen for the project and report on daily reports and discuss details at company meetings This position is located in Bohemia, NY. Individuals without pertinent experience are encouraged to not apply. Company DescriptionWhen you want quality – think BASCO. By choosing BASCO products you are assured of design excellence and manufacturing quality. BASCO has supplied material for hundreds of thousands of apartment buildings, hotels, nursing homes and other residential projects in the past 50 years. In fact, we have been designing and manufacturing medicine cabinets since 1923 HISTORY OF BASCO INC. BASCO Inc., a New York corporation, was founded by William Kowalchuk in 1976. The Company was formed as a manufacturer’s representative and distributors of washroom accessories. After its first year of operations, the Company expanded its distribution activities to include other bathroom accessory products, along with access doors, fire extinguishers, and fire extinguisher cabinets. The Company then became involved in the design of a new line of innovative bathroom medicine cabinets that it had manufactured under private label by various manufacturers. The new medicine cabinet product line experienced wide acceptance by Architects and builders for its high quality and design excellence. That product line has grown substantially and in 1984 William Kowalchuk acquired the Albert H. Voigt Company to manufacture its expanded line of bathroom medicine cabinets. Today, Basco continues to hold its position as one of the few manufacturers of high-quality bathroom medicine cabinets made in the United States. The Company continues to experience very steady growth and has expanded its markets to Europe, Asia, Africa and Pacific Rim. This growth can surely be attributed to the Company’s long held policy of design excellence, consistent manufacturing quality and superior customer service. We are proud to serve to the construction industry since 1978.When you want quality – think BASCO. By choosing BASCO products you are assured of design excellence and manufacturing quality. BASCO has supplied material for hundreds of thousands of apartment buildings, hotels, nursing homes and other residential projects in the past 50 years. In fact, we have been designing and manufacturing medicine cabinets since 1923\r\n\r\nHISTORY OF BASCO INC.\r\nBASCO Inc., a New York corporation, was founded by William Kowalchuk in 1976. The Company was formed as a manufacturer’s representative and distributors of washroom accessories. After its first year of operations, the Company expanded its distribution activities to include other bathroom accessory products, along with access doors, fire extinguishers, and fire extinguisher cabinets. The Company then became involved in the design of a new line of innovative bathroom medicine cabinets that it had manufactured under private label by various manufacturers.\r\n\r\nThe new medicine cabinet product line experienced wide acceptance by Architects and builders for its high quality and design excellence. That product line has grown substantially and in 1984 William Kowalchuk acquired the Albert H. Voigt Company to manufacture its expanded line of bathroom medicine cabinets. Today, Basco continues to hold its position as one of the few manufacturers of high-quality bathroom medicine cabinets made in the United States.\r\n\r\nThe Company continues to experience very steady growth and has expanded its markets to Europe, Asia, Africa and Pacific Rim. This growth can surely be attributed to the Company’s long held policy of design excellence, consistent manufacturing quality and superior customer service.\r\n\r\nWe are proud to serve to the construction industry since 1978.

Job Description CloudFirst is a leading managed cloud, cybersecurity, and infrastructure services provider focused on helping midsize enterprises modernize operations, improve resiliency, and accelerate business growth. The company delivers secure, scalable, and compliant IT solutions that allow organizations to focus on innovation while CloudFirst manages mission-critical infrastructure, cybersecurity, and operational performance. With deep expertise across cloud infrastructure, managed services, cybersecurity, disaster recovery, and compliance, CloudFirst partners with clients across industries including manufacturing, healthcare, financial services, legal, transportation, hospitality, utilities, construction, and government. CloudFirst’s mission is to protect and optimize customer operations, data, and business continuity. The company is committed to delivering exceptional customer experiences through responsive engineering support, operational excellence, and strategic technology partnerships. As CloudFirst continues its next phase of accelerated growth, the company is seeking a high-impact Chief Revenue Officer (CRO) to lead all revenue-generating functions, scale the go-to-market organization, and help drive long-term enterprise value creation. LOCATION: REMOTE Position Summary: The Chief Revenue Officer (CRO) reports directly to the Chief Executive Officer and serve as a critical member of the executive leadership team. The CRO will be responsible for leading and aligning all revenue-generating functions, including sales, channel partnerships, marketing, business development, account management, and customer success. This executive will design and execute a scalable go-to-market strategy focused on accelerating recurring revenue growth, expanding market share, strengthening strategic partnerships, and improving customer retention and expansion. The ideal candidate is a hands-on, metrics-driven revenue leader with experience scaling managed services, cloud, cybersecurity, or technology-enabled services organizations. Key Responsibilities: Revenue Strategy • Develop and execute the company’s multi-year revenue growth strategy, • Establish revenue targets, forecasting models, and operational KPIs, • Align go-to-market strategy with target customer segments and service offerings, • Identify and evaluate new market opportunities, partnerships, and expansion strategies, • Drive predictable recurring revenue growth and long-term customer value Sales Leadership • Build, lead, and scale high-performing direct and channel sales teams, • Establish accountability, pipeline discipline, and sales execution standards, • Coach and mentor sales leadership and individual contributors, • Develop compensation plans and incentive structures aligned to company objectives, • Improve sales productivity, win rates, and customer acquisition efficiency Marketing & Demand Generation • Partner with marketing leadership to drive pipeline growth and brand awareness, • Build integrated outbound, inbound, partner, and digital demand generation programs, • Align marketing and sales around lead quality, conversion metrics, and funnel performance, • Improve market positioning, messaging, and competitive differentiation Channel & Strategic Partnerships • Expand and optimize strategic partner relationships, • Develop channel programs that increase lead generation and recurring revenue, • Strengthen relationships with technology vendors and ecosystem partners, • Drive partner accountability and measurable pipeline contribution Customer Success & Account Growth • Oversee account management and customer success functions, • Improve customer retention, upsell, and cross-sell performance, • Ensure strong executive relationships across key customer accounts, • Create processes that support customer satisfaction and long-term engagement Sales Operations & Enablement • Build scalable sales processes and operational infrastructure, • Establish accurate forecasting and pipeline management disciplines, • Optimize CRM systems, reporting, and analytics capabilities, • Drive data-driven decision-making across all revenue functions, • Standardize contract negotiation and pricing strategies Executive Leadership & Collaboration • Partner closely with Operations, Finance, Product, and Delivery teams, • Participate in strategic planning and board-level reporting, • Support acquisition integration and revenue synergy initiatives, • Foster a collaborative, high-performance leadership culture Key Objectives in the First 12 Months • Achieve and exceed annual bookings and revenue targets, • Strengthen and expand channel and strategic partnership programs, • Build scalable direct sales and demand generation capabilities, • Improve forecasting accuracy and pipeline visibility, • Enhance customer retention and expansion performance, • Align marketing, sales, and customer success around measurable KPIs, • Develop a repeatable, data-driven revenue operating model Education & Experience: • 10+ years of progressive leadership experience in sales, revenue operations, marketing, or business development, • Bachelor’s degree in business, Marketing, Technology, or related field preferred, • Proven track record of scaling recurring revenue businesses within MSP, MSSP, cloud, infrastructure, SaaS, or IT services organizations, • Experience leading direct sales, channel sales, and demand generation teams, • Strong understanding of managed services, cybersecurity, cloud infrastructure, and enterprise technology solutions, • Demonstrated success building scalable go-to-market organizations and predictable revenue engines, • Data-driven mindset with expertise in KPI management, forecasting, and sales analytics, • Hands-on leadership style with strong coaching and team development capabilities, • Experience working in private equity-backed organizations preferred, • Strong executive communication, negotiation, and relationship management skills, • Experience with CRM and sales enablement platforms such as Salesforce Required Skills & Competencies: • Strong strategic and operational leadership capabilities, • A builder mentality with experience scaling teams and infrastructure, • Ability to drive accountability while maintaining a collaborative culture, • Executive presence and credibility with customers, partners, and investors, • Passion for customer success and operational excellence, • High energy, urgency, and adaptability within fast-growth environments, • Experience integrating acquisitions and aligning multiple revenue channels Alignment with CloudFirst Values: At CloudFirst, how we work is just as important as what we deliver. Team members are expected to align their approach to work with CloudFirst’s core values, including: Customer Focus: We are customer-centric in everything we do. Placing our clients at the heart of every decision. Will-Do Attitude: We embody a Will-Do Attitude. Approaching every challenge as an opportunity to show value to our clients. Collaboration: Collaboration defines how we work. We are team players committed to working together with responsiveness, support, and a shared purpose. Equal Employment Opportunity Statement: CloudFirst is an equal opportunity employer. We are committed to providing equal employment opportunities to all qualified applicants and employees without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other legally protected characteristic.

Manufacturing Engineer We are looking for a Manufacturing Engineer to join our Target Rock team! As our Manufacturing Engineer you will interact with and support the machine shop production and personnel. The individual receives minimum direction from the Plant or Manufacturing Engineering Manager regarding methodology of manufacturing. The individual is responsible to generate methods in detailed format for Manufacturing Production. The individual will perform all necessary tool and fixture designs for both manufacturing and quality requirements. The individual will interact with both in-house manufacturing personnel, as well as vendor interaction in the support of all tool and fixture fabrication. The individual supports CNC Programming methods within our manufacturing facility. Location: East Farmingdale, NY Salary/hourly rate: $83,800 to $110,000 Please note that the salary range information provided is a general guideline only, reflecting a position based in New York. Criteria such as the candidate's qualifications and relevant experience, the scope of the specific position, as well as market and business considerations will be evaluated when extending an offer. We Take Care of Our People Paid Time Off I 401K with Employer Match and Profit Sharing I Health and Wellness Benefits I Learning and Development Opportunities I Referral Program I Competitive Pay I Recognition I Employee Stock Purchase Plan I Inclusive & Supportive Culture * Your Challenge • Generates Operation Sheets and Operation Sketches to support all phases of manufacturing within the facility., • Designs necessary tooling and fixtures required to support manufacturing processes., • Maintain all applicable manufacturing project documentation., • Additional responsibilities as assigned by Supervisor., • Support Manufacturing Engineering Department in the absence of the Senior Manufacturing Engineer. What You Bring • Must be a US citizen, • Ability to methodize parts with minimum supervision. Knowledge of machine shop practices and techniques., • Design and overview tool and fixturing requirements for manufacturing components., • Basic knowledge of raw materials and related machinability. Ability to define applicable feeds - speeds combinations for established manufacturing process., • Ability to generate CAD drawings., • Capable to analyze manufacturing equipment or tooling problems to efficiently implement solutions to economically solve these production problems in a timely manner., • Knowledge of computer-controlled machine tools., • Must possess the mental capacity to comprehend information provided daily and make own decisions. EDUCATION / TRAINING: • Associate Degree minimum in Manufacturing/Mechanical Technology or equivalent related field or a commensurate level of related experience., • Five (5) years minimum experience performing manufacturing engineering responsibilities, inclusive of manufacturing methods, tool and fixture design, and budget and cost analysis., • Working knowledge of Mastercam CAD/CAM software version 8.xx or greater. Who We Are Our Values Environmental, Social and Governance Founded in 1951 to meet the special severe service valve requirements of the United States Nuclear Navy, Target Rock is today the premier supplier of highly engineered, valves and related products to both the U.S. Navy nuclear fleet and the global nuclear power generation industry. The first Target Rock valves were installed on the U.S.S. Nautilus, the U.S. Navy's first nuclear powered submarine. To learn more, please visit us at Curtiss-Wright EMS - Target Rock (cw-ems.com) *Please note, benefits are country specific and may vary from location to location. #LI-NK1 No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Resumes submitted directly to any Curtiss-Wright employee or affiliate will not qualify for fee payment, and therefore become the property of Curtiss-Wright. Compliance Statement This position may require exposure to export-controlled information and subject to additional security screening. In the event information provided during the security screening reveals ineligibility to access export-controlled information, any offer of employment may be reconsidered or withdrawn. Curtiss-Wright is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, ethnicity, color, sexual orientation, gender identity, physical or mental disability, age, ancestry, legally protected medical condition, family care status, marital status, religion, veteran status, national origin, or any other legally protected status. If you require accommodation during the recruitment process, please contact Talent Acquisition. For US Applicants: EEO is The Law - click here for more information. If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Talent Acquisition and we will make all reasonable efforts to accommodate your request.

Quality Assurance Manager Curtiss-Wright is seeking a highly motivated Quality Assurance Manager to join their Peerless Instrument facility in East Farmingdale, NY! This business unit focuses on electronic assemblies, systems and software for the US military including advanced instrumentation and control systems that are not only used in Naval propulsion systems but also other Navy subsystems. The Quality Assurance Manager leads and oversees the quality assurance and quality control departments for Peerless Instrument, a Curtiss-Wright Company, reporting directly to the General Manager. This role ensures the effective implementation and continual improvement of the company's quality management system, drives compliance with defense quality standards, and ensures high levels of product quality and customer satisfaction. The Quality Assurance Manager acts as a key quality leader interfacing with internal teams, customers, and suppliers to resolve quality issues and implement best practices. Salary Information: $130,000 - $150,100 Please note that the salary range information provided is a general guideline only, reflecting a position based in New York. Criteria such as the candidate's qualifications and relevant experience, the scope of the specific position, as well as market and business considerations will be evaluated when extending an offer. Location: Farmingdale, NY Your Challenge • Develop and lead quality assurance teams, coaching quality engineers and inspectors, and fostering accountability and technical excellence., • Oversee the implementation, maintenance, and improvement of the Quality Management System (QMS), consistent with AS9100 and other applicable standards (e.g., MIL-SPEC, IPC)., • Ensure compliance with customer and regulatory requirements across design, manufacturing, and service operations., • Ensure timely and effective responses to Internal Corrective Actions Requests (ICARs) and Supplier Corrective Action Requests (SCARs)., • Ensure control of nonconforming material, Material Review Board (MRB) processes, and product disposition., • Partner with Manufacturing and Engineering to support process control FAI/AS9102, and configuration management., • Oversee Inspection, Test, and acceptance activities for manufacturing products., • Plan, execute, and manage internal quality audits and support external supplier assessments., • Serve as the management representative for certification activities where required., • Lead investigations into customer quality issues, root cause analysis (using structured methods such as 5 Whys, 8D), and corrective/preventive actions., • Manage customer feedback and Supplier Corrective Action Requests (SCARs) with timely and effective resolution., • Oversee supplier quality performance, assessments, and improvement plan., • Manage supplier quality performance, audits, and improvement initiatives., • Ensure proper quality flow-down of contractual, regulatory, and technical requirements to suppliers and subcontractors., • Drive continuous improvement initiatives using Lean, Six Sigma, SPC and data driven methodologies., • Monitor quality KPIs including defect rates, Cost of Poor Quality (COPQ), on-time delivery impact, and audit performance., • Promote a culture of quality, accountability, and compliance across the organization., • Foster cross-functional collaboration and quality ownership through the business., • Partner with supply chain and procurement on quality flow-downs and supplier monitoring., • Work closely with engineering, Production, Operations, and Contracts to ensure quality requirements are integrated into program and product., • Represent quality goals and metrics in business reviews and strategic discussions., • Conduct monthly management meetings with upper management to review monthly metrics in Peerless and Supplier quality and delivery performance. Your Expertise • Strong working knowledge of AS9100, MIL-STD/MIL-SPEC, DFARS, ITAR and defense contracting requirements., • Expertise in root cause analysis, CAPA, MRB, FAI (AS9102), SPC, and audit management., • Ability to interpret engineering drawings, specifications, and contractual quality clauses., • Excellent communication, leadership, and problem-solving skills., • Ability to successfully manage multiple projects simultaneously., • Ability to work well in multi-disciplinary teams., • Knowledge of manufacturing and test processes and ability to work well with Production Control, Manufacturing Engineers, Manufacturing Operators and Test personnel., • Ability to interface with and provide technical support to subcontractors, suppliers, and customers., • Bachelor's degree in engineering, Quality, Manufacturing, or related technical discipline required, • A minimum of 7-10 years of quality experience in defense, or highly regulated manufacturing., • Prior leadership experience within a quality organization required., • Experience working directly with government customers and prime contractors preferred., • Ability to obtain and maintain a DoD clearance, • Must be a U.S Citizen#LI-TS1 No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Resumes submitted directly to any Curtiss-Wright employee or affiliate will not qualify for fee payment, and therefore become the property of Curtiss-Wright. Compliance Statement This position may require exposure to export-controlled information and subject to additional security screening. In the event information provided during the security screening reveals ineligibility to access export-controlled information, any offer of employment may be reconsidered or withdrawn. Curtiss-Wright is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, ethnicity, color, sexual orientation, gender identity, physical or mental disability, age, ancestry, legally protected medical condition, family care status, marital status, religion, veteran status, national origin, or any other legally protected status. If you require accommodation during the recruitment process, please contact Talent Acquisition. For US Applicants: EEO is The Law - click here for more information. If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Talent Acquisition and we will make all reasonable efforts to accommodate your request.

Director of Quality Assurance Curtiss Wright's Target Rock (TR) Business Unit located in East Farmingdale, NY is looking multifaceted leader to head up our Quality Department. TR is 200,000 square foot, heavy manufacturing facility with a staff of 320 team members. Our mission is to serve our country and the world by delivering safety critical precision valves and actuators, enabling US Navy operational excellence and reliable emission free power. Our vision is to modernize and grow our capabilities to meet tomorrow's Navy and Power demands. Having the right quality leader is essential to achieving this mission and vision. As our Director of Quality Assurance you will report directly to the General Manager, as a Senior Leader Team member, and be responsible for directing and managing the TR Quality Management System. The successful candidate must be able to navigate complex quality systems and issues in our United States Navy and Nuclear markets. They must also drive product and process improvement while significantly enhancing Quality Assurance and Quality Control effectiveness and capabilities. You must embody our Quality First culture. Our neighbors and sailors count on us to deliver valves and actuators that operate flawlessly in demanding reactor safety applications both on land and at sea. To do so you have to have a passion to fulfil the promise that all hardware and software must meet EVERY requirement BEFORE it leaves our facility. Finally you have motivate and empower our team to have an acute attention to detail while having a questioning attitude for anything that does not seem right. Salary range: $180,000 - $225,000 plus bonus opportunity Please note that the salary range information provided is a general guideline only, reflecting a position based in New York. Criteria such as the candidate's qualifications and relevant experience, the scope of the specific position, as well as market and business considerations will be evaluated when extending an offer. We Care About Our People Paid Time Off I 401K with Employer Match and Profit Sharing I Health and Wellness Benefits I Learning and Development Opportunities I Referral Program I Competitive Pay I Recognition I Employee Stock Purchase Plan I Inclusive & Supportive Culture Your Challenge: • Direct and improve the daily operations of Inspection, Quality Engineering and NDE activities, • Be the direct liaison with customer and government Quality Assurance management representatives, • Assure the maintenance of Quality auditing and inspection activities, • Revise and maintain Quality Management System Manual and supporting procedures, • Establish intra and inter departmental training programs, • Facilitate a learning organization driving down escapes, rework and scrap by generating sound root causes, corrective actions and preventative actions., • Assure that product quality levels are maintainedWhat you bring:, • Bachelor of Science, • Minimum ten (10) years' experience in Quality Assurance and related disciplines, • Submarine Safety, Naval Nuclear and/or Commercial Nuclear quality experience desired, • Diversified background in mechanical and quality related activities, • Minimum five (5) years management experience in management, • Strong leadership, managerial and communications skills, • Must be a US Citizen, • Working knowledge of Defense and ASME Code Specifications #LI-NK No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Resumes submitted directly to any Curtiss-Wright employee or affiliate will not qualify for fee payment, and therefore become the property of Curtiss-Wright. Compliance Statement This position may require exposure to export-controlled information and subject to additional security screening. In the event information provided during the security screening reveals ineligibility to access export-controlled information, any offer of employment may be reconsidered or withdrawn. Curtiss-Wright is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, ethnicity, color, sexual orientation, gender identity, physical or mental disability, age, ancestry, legally protected medical condition, family care status, marital status, religion, veteran status, national origin, or any other legally protected status. If you require accommodation during the recruitment process, please contact Talent Acquisition. For US Applicants: EEO is The Law - click here for more information. If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Talent Acquisition and we will make all reasonable efforts to accommodate your request.

Quality Control Inspector We are seeking a Quality Control Inspector that will perform a wide variety of electro/mechanical inspections of mission critical product in accordance with IPC-610 and IPC/WHMA-A-620 Class 3 requirements. Knowledge of wiring and soldering of electro/mechanical assemblies in accordance with engineering drawings, manufacturing work instructions and IPC standards. Familiar with AQL Single/Double Sampling Plan, use of measurement tools such as, Calipers, Micrometers, Height/Thread gages etc. In addition, familiar with quality control concepts, Mil-Standards, practices and procedures. Our Peerless Instrument facility provides state-of-the-art electronic assemblies, systems and software to the US military. Peerless' advanced instrumentation and control systems are not only used in Navy propulsion systems but provide sophisticated monitoring systems for industrial applications. Location: Farmingdale, NY Wage Information: $25.50 - $34.00 Per hour Please note that the salary range information provided is a general guideline only, reflecting a position based in New York. Criteria such as the candidate's qualifications and relevant experience, the scope of the specific position, as well as market and business considerations will be evaluated when extending an offer. We Take Care of Our People: Paid Time Off I 401K with Employer Match and Profit Sharing I Health and Wellness Benefits I Learning and Development Opportunities I Referral Program I Competitive Pay I Recognition I Employee Stock Purchase Plan I Inclusive & Supportive Culture Your Challenge: • Perform detailed inspections on cable, harnesses, electro mechanical assemblies in accordance with all IPC Standards and manufacturing work instructions., • Performs detailed inspection on complex electronic equipment in accordance with all imposed IPC and Military workmanship standards., • Perform Incoming inspection on electro/mechanical parts in accordance with engineering drawings and Mil-Standard requirements., • Perform dimensional inspections on raw material in accordance with engineering drawing requirements., • Must be able to independently interpret manufacturing work and quality inspection instructions, • Generates product verification documentation in accordance with departmental procedures, • Proficient in Microsoft Word and Excel based software Your Expertise: • Knowledge of IPC-610 and IPC/WHMA-620 workmanship standards, • Ability to read and interpret assembly, detail and parts list drawings., • Experience in defense electronics preferred, • Must be familiar with using PC based tools', • Must be a US citizen and be able to obtain DOD Security clearance #LI-TS1 No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Resumes submitted directly to any Curtiss-Wright employee or affiliate will not qualify for fee payment, and therefore become the property of Curtiss-Wright. Compliance Statement This position may require exposure to export-controlled information and subject to additional security screening. In the event information provided during the security screening reveals ineligibility to access export-controlled information, any offer of employment may be reconsidered or withdrawn. Curtiss-Wright is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, ethnicity, color, sexual orientation, gender identity, physical or mental disability, age, ancestry, legally protected medical condition, family care status, marital status, religion, veteran status, national origin, or any other legally protected status. If you require accommodation during the recruitment process, please contact Talent Acquisition. For US Applicants: EEO is The Law - click here for more information. If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Talent Acquisition and we will make all reasonable efforts to accommodate your request.

Manufacturing Engineer, Associate \n \n \nWe are looking for a Manufacturing Engineer, Associate to join our Target Rock team!\n \n \nAs our Associate Manufacturing Engineer you will support the development, coordination, and improvement of manufacturing processes, assisting with methods definition, production documentation, cost analysis, and cross-functional collaboration to ensure efficient, consistent, and high-quality fabrication of parts, components, and assemblies.\n \n Location: East Farmingdale, NY\n \n Salary/hourly rate: $74,100 to $84 ,000\n \n \nPlease note that the salary range information provided is a general guideline only, reflecting a position based in New York. Criteria such as the candidate's qualifications and relevant experience, the scope of the specific position, as well as market and business considerations will be evaluated when extending an offer.\n \n We Take Care of Our People\n \n \nPaid Time Off I 401K with Employer Match and Profit Sharing I Health and Wellness Benefits I Learning and Development Opportunities I Referral Program I Competitive Pay I Recognition I Employee Stock Purchase Plan I Inclusive & Supportive Culture *\n \n Your Challenge\n \n\n • Assist in defining manufacturing process flows, work instructions, and standard procedures to support consistent, efficient production \n • Perform routine methods and operational analyses to evaluate labor standards, equipment needs, and process flow data to help improve productivity and reduce cost \n • Support the review of engineering drawings, specifications, and engineering changes to ensure manufacturability and alignment with production requirements \n • Collaborate with design, quality, procurement, inspection, production, and program teams to resolve technical issues and coordinate new product release activities \n • Maintain records, documentation, and reporting systems to support manufacturing operations, process updates, and compliance needs \nWhat You Bring\n \n\n • Must be a US citizen \n • Bachelor's degree in Manufacturing, Mechanical, Industrial Engineering, or a related field \n • 1+ years of experience in manufacturing, process engineering, or related technical roles \n • Understanding of manufacturing processes, production workflows, and basic methods analysis \n • Ability to interpret engineering drawings, specifications, and technical documentation \n • Strong analytical and problem-solving skills with attention to detail \n • Effective communication and teamwork skills across engineering and operations functions \n • Familiarity with production documentation, work instructions, and process standards \n • Ability to manage multiple tasks and work in a fast-paced manufacturing environment \nWho We Are\n \n \nOur Values\n \n \nEnvironmental, Social and Governance\n \n \nFounded in 1951 to meet the special severe service valve requirements of the United States Nuclear Navy, Target Rock is today the premier supplier of highly engineered, valves and related products to both the U.S. Navy nuclear fleet and the global nuclear power generation industry. The first Target Rock valves were installed on the U.S.S. Nautilus, the U.S. Navy's first nuclear powered submarine.\n \n \nTo learn more, please visit us at Curtiss-Wright EMS - Target Rock (cw-ems.com)\n \n \n*Please note, benefits are country specific and may vary from location to location.\n \n \n#LI-NK1\n \n \n#IND\n \n \nNo unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Resumes submitted directly to any Curtiss-Wright employee or affiliate will not qualify for fee payment, and therefore become the property of Curtiss-Wright. \n \n Compliance Statement\n \n \nThis position may require exposure to export-controlled information and subject to additional security screening. In the event information provided during the security screening reveals ineligibility to access export-controlled information, any offer of employment may be reconsidered or withdrawn. \n \n \nCurtiss-Wright is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, ethnicity, color, sexual orientation, gender identity, physical or mental disability, age, ancestry, legally protected medical condition, family care status, marital status, religion, veteran status, national origin, or any other legally protected status. If you require accommodation during the recruitment process, please contact Talent Acquisition.\n \n For US Applicants: EEO is The Law - click here for more information.\n \n \nIf you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Talent Acquisition and we will make all reasonable efforts to accommodate your request.

The Opportunity Manufacturing Engineering Intern - Summer Term Location: East Farmingdale, NY We have an exciting opportunity for a Manufacturing Engineering Intern to join our team! As a Manufacturing Engineering Intern for Peerless Instrument, you will perform various tasks to support assembling electronic instrumentation and control cabinets, and electro-mechanical equipment. The electronic cabinets are approximately 6' tall, have over 400 components/parts, and can have up to 3000 wiring terminations. You will maintain detailed operation sheet packages within a digital Manufacturing Execution System to facilitate the assembly process for electrical and mechanical parts, components, sub-assemblies, and final assemblies for defense products. Your Challenge: • Migrate Work Instructions to a digital Manufacturing Execution System for manufacturing operators to assemble and wire equipment, • Facilitate processes for tracking production tooling and material, • Support Manufacturing Engineering with Lean process improvements and projects, • Attend weekly status meetings and present project status updates Your Expertise: • Currently obtaining an Associate Degree or Bachelor Degree in Manufacturing, Mechanical, or related Engineering, • Experience using CAD or 3D Modeling software, • MS Office Word, Excel, and Powerpoint, • Knowledge of electronic and mechanical assembly principles Your Competencies: • Action oriented and independent worker, • Communicates effectively, • Collaborates well with multiple departments What we offer: Curtiss-Wright invests in the development, recruitment, and retention of critical skills as part of its model for business success. We offer a competitive wage, a comprehensive benefits package including medical and prescription drug coverage, dental benefits, life and disability insurance, 401K retirement, tuition reimbursement, and paid vacation/holidays. No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Resumes submitted directly to any Curtiss-Wright employee or affiliate will not qualify for fee payment, and therefore become the property of Curtiss-Wright. Compliance Statement This position may require exposure to export-controlled information and subject to additional security screening. In the event information provided during the security screening reveals ineligibility to access export-controlled information, any offer of employment may be reconsidered or withdrawn. Curtiss-Wright is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, ethnicity, color, sexual orientation, gender identity, physical or mental disability, age, ancestry, legally protected medical condition, family care status, marital status, religion, veteran status, national origin, or any other legally protected status. If you require accommodation during the recruitment process, please contact Talent Acquisition. For US Applicants: EEO is The Law - click here for more information. If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Talent Acquisition and we will make all reasonable efforts to accommodate your request.

Quality Control Manager We are looking for a Quality Control Manager to join our Target Rock team! As our Quality Control Manager you will report to the Director of Quality Assurance and will be charged with maintaining an inspection system to assure that all products manufactured by the organization meet customer specifications and achieve superior quality and reliability levels. Location: East Farmingdale, NY Salary/hourly rate: $102,900 to $135,000 Please note that the salary range information provided is a general guideline only, reflecting a position based in New York. Criteria such as the candidate's qualifications and relevant experience, the scope of the specific position, as well as market and business considerations will be evaluated when extending an offer. We Take Care of Our People Paid Time Off I 401K with Employer Match and Profit Sharing I Health and Wellness Benefits I Learning and Development Opportunities I Referral Program I Competitive Pay I Recognition I Employee Stock Purchase Plan I Inclusive & Supportive Culture * Your Challenge • Monitors each of the inspection functions (first piece, in-process, final, final valve inspection, receiving inspection and CMM operation and programming) for adequacy and that they meet their objectives., • Maintains examiner duties per STR ISO9000/QRC-82 (supervisor, inspection qualifications)., • Initiates cross-training and initial training programs that encompass all aspects of manufacturing inspection, • Monitors and reviews man-power requirements. Provides updates on required labor needs to complete programs (ETC) as required., • Reviews daily time charges, attendance, schedules overtime and backshift coverage., • Develops a work schedule that responds to priorities to each inspection location and discipline. Reviews shop loading report and addresses obstacles, hold points or conflicts., • Resolves procedure conflicts, employee conflicts, inspection method conflicts., • Provides responses to customer inquiries including inspection hours on new projects., • Develops inspection methods, including designing tools, purchasing, and equipment., • Prepares Appropriation Request (AR), obtains pricing and develops cost justification and calculates Return on Investment (ROI) on all capital equipment., • Maintains continuous process improvement program including periodic training sessions with Inspectors. Reviews procedure process, equipment and conditions with inspectors, as required. Establishes effective lines of communication and feedback with inspectors, manufacturing personnel, engineers, supervision, and management., • Develops and maintains employee development and participation programs that achieve the individual's potential and added value to the organization., • Ensures prompt resolution to conditions that adversely affect quality., • Periodically review documentation and inspection results., • Maintains calibration activity. Ensure the correct procedures are being used and the correct results obtained. Periodically reviews calibration frequency, and closely monitors gauging needs and usage. Ensures compliance to procedures., • Monitors NDE work loading, provide scheduling, and workload priorities. Performs periodic reviews on performance and procedure adherence., • Monitors/supervises Final Valve Inspection Department, review schedules and priorities with the inspector. Interacts with customers and contract administrators., • Analyze root cause of product and process deficiencies., • Provide written responses to customers concerns and findings. What You Bring • Associate Engineering Degree and/or have completed two (2) years study in related industry courses. Such studies should include courses in industrial methods, quality control, mathematics, and the application of statistical controls, as related to inspection methodology., • In addition, shall have 8 to 10 years' experience in the planning and conduct of inspection activities, and in the supervision of inspectors. Experience shall include the ability to direct the use of advanced inspection methods, development of inspection measurement methods, and the capacity to use and calibrate measuring and test devices., • Must be a US Citizen., • Auditing skills required. #LI-NK No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Resumes submitted directly to any Curtiss-Wright employee or affiliate will not qualify for fee payment, and therefore become the property of Curtiss-Wright. Compliance Statement This position may require exposure to export-controlled information and subject to additional security screening. In the event information provided during the security screening reveals ineligibility to access export-controlled information, any offer of employment may be reconsidered or withdrawn. Curtiss-Wright is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, ethnicity, color, sexual orientation, gender identity, physical or mental disability, age, ancestry, legally protected medical condition, family care status, marital status, religion, veteran status, national origin, or any other legally protected status. If you require accommodation during the recruitment process, please contact Talent Acquisition. For US Applicants: EEO is The Law - click here for more information. If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Talent Acquisition and we will make all reasonable efforts to accommodate your request.

Sr. Project Engineer We are looking for a Sr. Project Engineer to join our Target Rock team! You will direct all engineering aspects of projects related to design, development, and supply of high-pressure valves for nuclear power applications or industrial valve applications. Ensures valves supplied meet customer purchase order and specification requirements as well as all industry related codes. You will provide support to planning, purchasing, manufacturing, quality, contracts, programs, and assembly departments, as required, including proposals needing engineering inputs, engineering changes (ECOs), vendor support, quality audits and dispositioning of non-conforming hardware to resolve any in process issues and/or maintain product flow. Location: East Farmingdale, NY Salary/hourly rate: $94,700 to $136,900 Please note that the salary range information provided is a general guideline only, reflecting a position based in New York. Criteria such as the candidate's qualifications and relevant experience, the scope of the specific position, as well as market and business considerations will be evaluated when extending an offer. We Take Care of Our People Paid Time Off I 401K with Employer Match and Profit Sharing I Health and Wellness Benefits I Learning and Development Opportunities I Referral Program I Competitive Pay I Recognition I Employee Stock Purchase Plan I Inclusive & Supportive Culture * Your Challenge: • All Essential Functions listed on the Project Engineer (Energy Products) Job Description, • Assists the Engineering Manager in supporting Energy Products Sales bid and proposal activities., • Assists the Engineering Manager in providing department personnel training., • Participates and represents EP Project Engineering on cross functional teams., • Assists the Engineering Manager in supervising day-to-day EP Project Engineering functions, • Review of specifications for compliance with proposed design., • Preparation and release of design drawings and procedures., • Preparation and review of design and qualification reports., • Direction of qualification test programs., • Interpretation of applicable customer specifications and industry codes (ASME BPVC, ASTM, ANSI, AMS, IEEE, etc.), • Disposition of non-complying equipment in a timely manner., • Resolution of assembly and test problems., • Supports Energy Products Sales bid and proposal activities., • Provide technical support for customers as required, • Ensure all project technical requirements are captured on the project's bill of material, • Additional responsibilities as assigned by Manager/Supervisor. What You Bring: • Ten (10) years of valve and/or power plant experience., • Must be a US citizen, • Knowledge of valve products and industry requirements., • Comprehensive knowledge of configuration management and design control, • Working knowledge of applicable ASME and other codes., • Strong analytical and decision-making skills, • Knowledge of computer programs such as Microsoft Office Suite, Mathcad, and ANSYS, • Must possess the mental capacity to comprehend information provided daily and make own decisions. EDUCATION / TRAINING: • Four (4) year Bachelor of Science degree in Engineering (Mechanical or Nuclear), • Master of Science degree in Engineering (preferred), • Professional Engineering Registration (preferred), • Power Plant Systems training, • Valve design and manufacturing, • Product application #LI-NK No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Resumes submitted directly to any Curtiss-Wright employee or affiliate will not qualify for fee payment, and therefore become the property of Curtiss-Wright. Compliance Statement This position may require exposure to export-controlled information and subject to additional security screening. In the event information provided during the security screening reveals ineligibility to access export-controlled information, any offer of employment may be reconsidered or withdrawn. Curtiss-Wright is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, ethnicity, color, sexual orientation, gender identity, physical or mental disability, age, ancestry, legally protected medical condition, family care status, marital status, religion, veteran status, national origin, or any other legally protected status. If you require accommodation during the recruitment process, please contact Talent Acquisition. For US Applicants: EEO is The Law - click here for more information. If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Talent Acquisition and we will make all reasonable efforts to accommodate your request.

Manual Machinist Trainee The Conventional Machinist Trainee is responsible to successfully complete the training for the operation of the manual lathes, mills (Bridgeport), honing machines, and any other manual machines as seen fit by Operations Management. The individual shall train to perform these activities in compliance with Company procedures and quality requirements. The individual will be trained to check their own production parts and to operate manufacturing processes and make adjustment as required while working with supervisors. Location: East Farmingdale, NY. Hourly Salary: $27.82 Please note that the pay range information provided is a general guideline only, reflecting a position based in New York. Criteria such as the candidate's qualifications and relevant experience, the scope of the specific position, as well as market and business considerations will be evaluated when extending an offer. Your Challenge • Basic machine operation and setup, • Basic blueprint reading, • Ability to use basic inspection equipment and inspect own work., • Additional responsibilities as assigned by Supervisor. What You Bring • Refer to the applicable Department Skills Matrix for Job Qualifications / Requirements, • General good housekeeping practices within work area., • Maintain correct time reporting and accurate entries on applicable manufacturing documentation., • Comply with Company quality and safety requirements, • Basic Mathematics skills, • Must possess the mental capacity to comprehend information provided daily and make own decisions., • Must be a US citizen EDUCATION / TRAINING: • High School Graduate or equivalent, shop mathematics and Trigonometry Skills., • Two (2) years of manufacturing or related experience. #LI-NK1 No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Resumes submitted directly to any Curtiss-Wright employee or affiliate will not qualify for fee payment, and therefore become the property of Curtiss-Wright. Compliance Statement This position may require exposure to export-controlled information and subject to additional security screening. In the event information provided during the security screening reveals ineligibility to access export-controlled information, any offer of employment may be reconsidered or withdrawn. Curtiss-Wright is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, ethnicity, color, sexual orientation, gender identity, physical or mental disability, age, ancestry, legally protected medical condition, family care status, marital status, religion, veteran status, national origin, or any other legally protected status. If you require accommodation during the recruitment process, please contact Talent Acquisition. For US Applicants: EEO is The Law - click here for more information. If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Talent Acquisition and we will make all reasonable efforts to accommodate your request.

?? ISO Safety and Compliance Manager/ Great Place To Work! This Jobot Job is hosted by: Alex Console Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $100,000 - $120,000 per hour A bit about us: We have over 40 years of experience as a "Made in the USA" Electronic Manufacturing company serving multiple industries in North America. Why join us? What We Offer: • Competitive base pay and overall compensation package, • Full benefits: Medical, Dental, Vision, • Generous PTO, vacation, sick, and holidays, • Life Insurance coverage, • 401K Job Details We are actively seeking a seasoned ISO and Safety Compliance Manager to join our dynamic team in the Manufacturing industry. The successful candidate will be responsible for ensuring that our company's practices align with both international standards and safety regulations. This role requires a detail-oriented professional who is ready to take on the challenge of maintaining our company's commitment to safety and excellence. Responsibilities: As an ISO and Safety Compliance Manager, you will be tasked with the following: 1. Implementing and managing the ISO 9001 Quality Management System and ISO 14001 Environmental Management System., 2. Ensuring compliance with all relevant safety regulations and standards, such as OSHA, EPA, and local laws., 3. Conducting regular safety audits, risk assessments, and inspections to identify potential hazards and non-compliance issues., 4. Developing and delivering training programs to educate employees about safety procedures and compliance requirements., 5. Investigating accidents or incidents to discover causes and handle worker’s compensation claims., 6. Preparing and presenting reports on accidents and violations and how they can be prevented., 7. Reviewing and updating company policies to ensure they align with ISO standards and safety regulations., 8. Collaborating with the management team and employees to cultivate a safe and compliant workplace culture., 9. Keeping abreast of industry and regulatory developments to ensure the company's continuous compliance. Qualifications: To be considered for this role, candidates must possess the following: 1. A bachelor's degree in a related field such as Occupational Health and Safety, Engineering, or Quality Management., 2. A minimum of 5 years' experience in a similar role within the manufacturing industry., 3. Comprehensive knowledge of ISO 9001 and ISO 14001 standards., 4. Strong understanding of safety regulations and laws, particularly those relevant to the manufacturing industry., 5. Certified Safety Professional (CSP) or Certified Industrial Hygienist (CIH) preferred., 6. Excellent communication skills, both written and verbal, to effectively convey safety protocols and compliance requirements to all levels of the organization., 7. Outstanding organizational and leadership skills., 8. Proficient in using Microsoft Office Suite and safety management software., 9. Demonstrated ability to manage multiple projects, prioritize tasks, and meet deadlines., 10. Strong analytical and problem-solving skills. This is an excellent opportunity for a seasoned ISO and Safety Compliance Manager to apply their skills and experience in a challenging and rewarding environment. If you have a passion for safety and compliance, we would love to hear from you. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job Description Summary: Reporting to the Vice President of Operations and serving as a member of the Senior Management Team, this position's primary responsibility is ensuring organizational effectiveness by providing leadership for Parabit's project management functions. The Project Manager will help create organizational strategies, policies, and practices in collaboration with the President and Senior Management. This position will manage a variety of accounts and projects, and will also assess new build plans, assess various procedures in the production process (review manufacturing systems to reduce cost, improve quality and develop best practices), and maintain an open line of communication with multiple department, vendors and clients. This position will also implement ISO 9000 practices and guidelines with certification as a future objective. Responsibilities: • Leads the orderly progression of projects from the proposal stage through project completion by interacting with the client, technical staff, and business development staff., • Manage and increase the effectiveness and efficiency of departmental procedures, and communication between departments., • Maintains project documentation - communications, schedules, sample submission paperwork, meeting minutes., • Ensures timely and smooth transition of projects through Tech Transfer and R&D project phases., • Hold cross-functional teams accountable and give direction to project personnel., • Maintain accurate open Purchase Order lines to define the inbound quantities and due dates from vendors, identify system demand or BOM issues, and resolve inventory discrepancies., • Utilize industry best practices, techniques, and standards throughout entire project execution., • Regular meetings with the President and Sr. Management around project planning. Organizational Leadership • Contribute to short and long-term organizational planning and strategy as a member of the senior management team., • Drive initiatives in the organization that contribute to long-term operational excellence., • Other tasks as assigned Qualifications • 4 year bachelor's degree., • Strong appreciation of the design-build contracting methodology and prior experience completing design-build projects., • At least 3 years' experience in the Project Management field., • Strong background and work experience in manufacturing., • Excellent computer skills and proficient in excel, word, and outlook., • Excellent communication skills both verbal and written., • Knowledge and experience in organizational effectiveness and operations management implementing best practices., • Demonstrated leadership and vision in managing staff and major projects or initiatives., • Excellent interpersonal skills and a collaborative management style., • Budget development and oversight experience., • A demonstrated commitment to high professional ethical standards and a diverse workplace., • Knowledge of compliance implications., • Excels at operating in a fast-paced environment., • Open to direction and collaborative work style and commitment to get the job done., • Ability to challenge and debate issues of importance to the company., • Ability to look at situations from several points of view., • Persuasive with details and facts., • Delegate responsibilities effectively. Join an exceptional and energized team that shares a common belief in the value of creativity, operating with integrity, and leading through innovation. Parabit Systems is focused on growth - growing revenues and growing leaders. Parabit Systems is an equal opportunity employer, offering a great work environment, and challenging career opportunities. We offer competitive pay, health benefits, paid vacation, paid sick days, and a 401k. Please submit your resume via email to recruiting@parabit.com. All employment candidates must pass: a NON-DOT Drug screening, Criminal and Credit Background Check and a Driver License Check prior to employment.

Job Description ???? Nassau Candy Program Manager, Business Applications ???? Location: Hicksville, NY (Hybrid or Onsite Preferred) ???? Department: Business Systems ???? Reports To: Director, Business Applications ???? About Nassau Candy Nassau Candy is a premier manufacturer, importer, and distributor of specialty confections, fine foods, and promotional products. As we continue to scale, we are investing in modern business systems to drive operational efficiency, data visibility, and long-term growth across our manufacturing, distribution, and promotional business lines. ???? Position Summary We are seeking an experienced Project Manager, Business Applications to lead a strategic ERP transformation to NetSuite ERP, delivered in partnership with a third-party implementation consulting firm. This role serves as the internal program owner, ensuring strong collaboration between business stakeholders, IT, and the external system integrator. You will drive execution, accountability, and delivery outcomes across a complex, multi-functional environment. Success in this role means building a scalable, modern software ecosystem that improves productivity, ensures data integrity, and supports long-term business growth. ???? Key Responsibilities???? Program & Partner Leadership Own end-to-end program delivery in collaboration with the NetSuite implementation partner Define clear roles, responsibilities, and accountability across internal teams and partners Establish governance frameworks (steering committees, status reporting, escalation paths) Hold partners accountable to scope, timeline, budget, and quality (SOW adherence) ???? Vendor & System Integrator Management Serve as the primary point of contact for the NetSuite consulting partner Manage Statements of Work (SOW), change requests, and commercial alignment Monitor partner performance against SLAs/KPIs Challenge and validate partner recommendations to ensure alignment with business objectives Coordinate across additional vendors (WMS, EDI, CRM, payment gateways, etc.) ???? Business Process Alignment & Ownership Ensure business requirements are clearly defined, prioritized, and validated Facilitate design workshops with SMEs and partner consultants across: Manufacturing (production, quality, lot/traceability) Distribution (inventory, warehousing, logistics) Promotional/Souvenir business (pricing, rebates, ERP integrations) Drive decisions on configuration vs. customization with scalability in mind Balance standardization with critical business needs ???? Delivery Oversight Oversee key ERP implementation phases: Solution design System configuration Data migration Integrations Testing (SIT/UAT) Validate deliverables prior to business sign-off Manage risks, dependencies, and issue resolution Lead cutover planning and go-live readiness ???? Data, Integration & Quality Assurance Ensure data migration strategy is defined and executed with proper validation Oversee integrations between NetSuite and external systems (WMS, EDI, CRM, financial systems) Ensure strong testing strategy and business ownership of UAT Enforce data governance and quality standards ???? Change Management & Adoption Partner with consulting firm on training approach while owning business readiness Develop communication, training, and adoption strategies Ensure knowledge transfer from partner to internal teams Lead hypercare and transition to steady-state support ✅ Required Qualifications 7–12+ years of ERP project/program management experience Proven experience leading ERP implementations with external system integrators Strong experience with NetSuite or similar cloud ERP platforms Experience managing vendor contracts, SOWs, and delivery accountability Deep understanding of Food & Beverage operations: Manufacturing (batch processing, compliance, traceability) Distribution and supply chain Trade promotions and pricing ⭐ Preferred Qualifications NetSuite certifications (SuiteFoundation, ERP Consultant) PMP, PRINCE2, or equivalent certification Experience in multi-entity or multi-subsidiary environments Familiarity with integrations (WMS, EDI, 3PL, CRM platforms) ???? Key Competencies Strong vendor and stakeholder management Ability to challenge consulting partners constructively Executive-level communication and governance leadership Commercial acumen (contracts, budgeting, change orders) Cross-functional leadership across business and IT Relentless focus on accountability, delivery, and value realization ???? Success Metrics Implementation partner delivers on scope, timeline, and budget Minimal scope creep with controlled change management High-quality solution with limited post-go-live rework Successful knowledge transfer and reduced reliance on partners Strong adoption across all business functions ⚖️ Role Positioning (Critical Distinction) You own the outcome; the partner executes the build You validate and challenge; the partner recommends and configures You ensure business alignment; the partner ensures system delivery ???? Ideal Candidate A disciplined, results-driven Project Manager who thrives in complex environments—someone who can manage partners, drive accountability, and ensure successful ERP delivery while aligning technology with Nassau Candy’s business goals. #LI-AI1