Day shift jobs in Saratoga Springs, New York - Page 7Create job alerts

Department/Unit: Medical/Surgica Pulmonary Renal Hospitalist - E5 Work Shift: Day (United States of America) Salary Range: $83,200.00 - $93,184.00 Clinical Nurse - Albany Medical/Surgical Pulmonary Renal Unit The clinical Nurse contributes to the creation of a compassionate and caring environment for patients, families and colleagues through displays of kindness and active listening. Recognizes and appreciates that each employee’s work is valuable and contributes to the success of the Mission. Job Description • Implements physician orders, administers medications, starts IVs, performs treatments, procedures and special tests, and document treatment as required by company policy and local/state/federal rules and regulations., • Orders, interprets, and evaluates diagnostic tests to identify and assess patients' conditions., • Assesses and evaluates patient needs for, and responses to, care rendered., • Applies sound nursing judgment in patient care management decisions., • Provides primary and emergency care for occupational and non-occupational injuries and illnesses., • Administers over-the-counter and prescription medications as ordered., • Collaborates with the nursing team to create a Plan of Care for all patients., • Directs and guides ancillary personnel and maintain standards of professional nursing. Job Requirements • Graduate of a professional academic nursing program in which a Diploma, Associate Degree or Baccalaureate Degree is conferred, • Must hold current NYS Registered Nurse license, • Obtains and maintains certification in Basic Life Support (BLS)., • Excellent communication, prioritization, organizational and time-management skills, • Possesses knowledge of quality concepts, principles, and problem-solving tools and techniques and demonstrates ability to apply in support of departmental and patient care quality improvement. Salary Range: $33.00/hr - $63.98/hr Thank you for your interest in Albany Medical Center! Albany Medical is an equal opportunity employer. This role may require access to information considered sensitive to Albany Medical Center, its patients, affiliates, and partners, including but not limited to HIPAA Protected Health Information and other information regulated by Federal and New York State statutes. Workforce members are expected to ensure that: Access to information is based on a “need to know” and is the minimum necessary to properly perform assigned duties. Use or disclosure shall not exceed the minimum amount of information needed to accomplish an intended purpose. Reasonable efforts, consistent with Albany Med Center policies and standards, shall be made to ensure that information is adequately protected from unauthorized access and modification.

Department/Unit: Secure Unit - C3W Work Shift: Day (United States of America) Salary Range: $83,200.00 - $93,184.00 The Registered Professional Nurse assesses, coordinates, plans, directs, implements and manages the needs of assigned patients throughout the episode of care with a focus on progress toward discharge, including during transitions within the acute care stay. The Registered Professional Nurse is responsible for the delivery and coordination of patient care provided by the caregiving team. S/he assures that competent, compassionate patient care is uniformly provided to customers including referring facilities, hospital staff and patients in the inpatient, ambulatory, and community settings. Hourly Min= $34.65 Hourly Max= $35.69 The Registered Professional Nurse assesses, coordinates, plans, directs, implements and manages the needs of assigned patients throughout the episode of care with a focus on progress toward discharge, including during transitions within the acute care stay. The Registered Professional Nurse is responsible for the delivery and coordination of patient care provided by the caregiving team. S/he assures that competent, compassionate patient care is uniformly provided to customers including referring facilities, hospital staff and patients in the inpatient, ambulatory, and community settings. Thank you for your interest in Albany Medical Center! Albany Medical is an equal opportunity employer. This role may require access to information considered sensitive to Albany Medical Center, its patients, affiliates, and partners, including but not limited to HIPAA Protected Health Information and other information regulated by Federal and New York State statutes. Workforce members are expected to ensure that: Access to information is based on a “need to know” and is the minimum necessary to properly perform assigned duties. Use or disclosure shall not exceed the minimum amount of information needed to accomplish an intended purpose. Reasonable efforts, consistent with Albany Med Center policies and standards, shall be made to ensure that information is adequately protected from unauthorized access and modification.

Department/Unit: Critical Care Float Pool Work Shift: Day (United States of America) Salary Range: $88,192.00 - $136,697.60 Join the dynamic team in the Albany Medical Center Critical Care Float Pool today! An opportunity to gain and practice critical care skills in the following areas: Neuro-Surgical Trauma ICU, Medical ICU, Coronary Care Unit, Cardiovascular ICU , and our intermediate care ICU- the MSICU. Hourly Range: $36.73 - $60.93 RNs in the Critical Care Float pool also have the opportunity to gain additional competencies in Emergency Department care and neuro-progressive care areas. You will have the opportunity to work in all the Critical Care areas at the Region’s only Level I trauma center. Consider joining this dynamic, highly skilled Nursing team today! The Clinical Nurse contributes to the creation of a compassionate and caring environment for patients, families and colleagues through displays of kindness and active listening. Recognizes and appreciates that each employee’s work is valuable and contributes to the success of the Mission. Job Description: • Orders, interprets, and evaluates diagnostic tests to identify and assess patients' conditions., • Assesses and evaluates patient needs for, and responses to, care rendered., • Applies sound nursing judgment in patient care management decisions., • Provides primary and emergency care for occupational and non-occupational injuries and illnesses., • Administers over-the-counter and prescription medications as ordered., • Collaborates with the nursing team to create a Plan of Care for all patients., • Directs and guides ancillary personnel and maintain standards of professional nursing. Qualifications: • Must hold current NYS Registered Nurse license, • Minimum of 1-3 years of previous clinical RN experience in Med-Surg or Progressive Care, • Excellent communication, prioritization, organizational and time-management skills Thank you for your interest in Albany Medical Center! Albany Medical is an equal opportunity employer. This role may require access to information considered sensitive to Albany Medical Center, its patients, affiliates, and partners, including but not limited to HIPAA Protected Health Information and other information regulated by Federal and New York State statutes. Workforce members are expected to ensure that: Access to information is based on a “need to know” and is the minimum necessary to properly perform assigned duties. Use or disclosure shall not exceed the minimum amount of information needed to accomplish an intended purpose. Reasonable efforts, consistent with Albany Med Center policies and standards, shall be made to ensure that information is adequately protected from unauthorized access and modification.

Department/Unit: Float Pool Work Shift: Day (United States of America) Salary Range: $83,200.00 - $93,184.00 The clinical Nurse contributes to the creation of a compassionate and caring environment for patients, families and colleagues through displays of kindness and active listening. Recognizes and appreciates that each employee’s work is valuable and contributes to the success of the Mission. Job Description • Implements physician orders, administers medications, starts IVs, performs treatments, procedures and special tests, and document treatment as required by company policy and local/state/federal rules and regulations., • Orders, interprets, and evaluates diagnostic tests to identify and assess patients' conditions., • Assesses and evaluates patient needs for, and responses to, care rendered., • Applies sound nursing judgment in patient care management decisions., • Provides primary and emergency care for occupational and non-occupational injuries and illnesses., • Administers over-the-counter and prescription medications as ordered., • Collaborates with the nursing team to create a Plan of Care for all patients., • Directs and guides ancillary personnel and maintain standards of professional nursing. Minimum Qualifications • Graduate of a professional academic nursing program in which a Diploma, Associate Degree or Baccalaureate Degree is conferred, • Must hold current NYS Registered Nurse license, • Obtains and maintains certification in Basic Life Support (BLS) and Advanced Cardiac Life Support (ACLS), • Minimum of 1-3 years of previous clinical RN experience in Med-Surg or Progressive Care, • Excellent communication, prioritization, organizational and time-management skills, • Possesses knowledge of quality concepts, principles, and problem-solving tools and techniques and demonstrates ability to apply in support of departmental and patient care quality improvement. Thank you for your interest in Albany Medical Center! Albany Medical is an equal opportunity employer. This role may require access to information considered sensitive to Albany Medical Center, its patients, affiliates, and partners, including but not limited to HIPAA Protected Health Information and other information regulated by Federal and New York State statutes. Workforce members are expected to ensure that: Access to information is based on a “need to know” and is the minimum necessary to properly perform assigned duties. Use or disclosure shall not exceed the minimum amount of information needed to accomplish an intended purpose. Reasonable efforts, consistent with Albany Med Center policies and standards, shall be made to ensure that information is adequately protected from unauthorized access and modification.

Department/Unit: Operating Room Work Shift: Day (United States of America) Salary Range: $83,200.00 - $93,184.00 The Clinical Nurse assesses, coordinates, plans, directs, implements and manages the needs of assigned patients throughout the episode of care with a focus on progress toward discharge, including during transitions within the acute care stay. The Clinical Nurse is responsible for the delivery and coordination of patient care provided by the caregiving team. S/he assures that competent, compassionate patient care is uniformly provided to customers including referring facilities, hospital staff and patients in the inpatient, ambulatory, and community settings. Essential Duties & Responsibilities include but not limited to: • Implements physician orders, administers medications, starts IVs, performs treatments, procedures and special tests, and document treatment as required by company policy and local/state/federal rules and regulations., • Orders, interprets, and evaluates diagnostic tests to identify and assess patients' conditions., • Assesses and evaluates patient needs for, and responses to, care rendered., • Applies sound nursing judgment in patient care management decisions., • Provides primary and emergency care for occupational and non-occupational injuries and illnesses., • Administers over-the-counter and prescription medications as ordered., • Collaborates with the nursing team to create a Plan of Care for all patients., • Directs and guides ancillary personnel and maintain standards of professional nursing. Minimum Qualifications: • Graduate of a professional academic nursing program in which a Diploma, Associate Degree or Baccalaureate Degree is conferred., • Must hold current NYS Registered Nurse license., • Obtains and maintains certification in Basic Life Support (BLS) and Advanced Cardiac Life Support (ACLS)., • Previous experience as a PCA or other nursing assistance preferred., • Ability to improve job performance through continuing education., • Possesses knowledge of quality concepts, principles, and problem-solving tools and techniques and demonstrates ability to apply in support of departmental and patient care quality improvement. Thank you for your interest in Albany Medical Center! Albany Medical is an equal opportunity employer. This role may require access to information considered sensitive to Albany Medical Center, its patients, affiliates, and partners, including but not limited to HIPAA Protected Health Information and other information regulated by Federal and New York State statutes. Workforce members are expected to ensure that: Access to information is based on a “need to know” and is the minimum necessary to properly perform assigned duties. Use or disclosure shall not exceed the minimum amount of information needed to accomplish an intended purpose. Reasonable efforts, consistent with Albany Med Center policies and standards, shall be made to ensure that information is adequately protected from unauthorized access and modification.

Department/Unit: Vascular Surgery -C5 Work Shift: Day (United States of America) Salary Range: $83,200.00 - $93,184.00 The Clinical Nurse assesses, coordinates, plans, directs, implements and manages the needs of assigned patients throughout the episode of care with a focus on progress toward discharge, including during transitions within the acute care stay. The Clinical Nurse is responsible for the delivery and coordination of patient care provided by the caregiving team. S/he assures that competent, compassionate patient care is uniformly provided to customers including referring facilities, hospital staff and patients in the inpatient, ambulatory, and community settings. Hourly Range: $34.65 - $35.69 On our Vascular Surgery Units you will be caring for patients with multiple co-morbidities requiring knowledge of all body systems. Many of these patients are fresh amputations, vascular wounds, extensive vascular surgery to restore blood flow, etc. Required education that will be provided include, but not limited to: BLS, ACLS, Telemetry, wound care, Wound-Vacs and central lines. Essential Duties & Responsibilities include but not limited to: • Implements physician orders, administers medications, starts IVs, performs treatments, procedures and special tests, and document treatment as required by company policy and local/state/federal rules and regulations., • Orders, interprets, and evaluates diagnostic tests to identify and assess patients' conditions., • Assesses and evaluates patient needs for, and responses to, care rendered., • Applies sound nursing judgment in patient care management decisions., • Provides primary and emergency care for occupational and non-occupational injuries and illnesses., • Administers over-the-counter and prescription medications as ordered., • Collaborates with the nursing team to create a Plan of Care for all patients., • Directs and guides ancillary personnel and maintain standards of professional nursing. Minimum Qualifications: • Graduate of a professional academic nursing program in which a Diploma, Associate Degree or Baccalaureate Degree is conferred., • Must hold current NYS Registered Nurse license., • Obtains and maintains certification in Basic Life Support (BLS) and Advanced Cardiac Life Support (ACLS)., • Previous experience as a PCA or other nursing assistance preferred., • Ability to improve job performance through continuing education., • Possesses knowledge of quality concepts, principles, and problem-solving tools and techniques and demonstrates ability to apply in support of departmental and patient care quality improvement. Thank you for your interest in Albany Medical Center! Albany Medical is an equal opportunity employer. This role may require access to information considered sensitive to Albany Medical Center, its patients, affiliates, and partners, including but not limited to HIPAA Protected Health Information and other information regulated by Federal and New York State statutes. Workforce members are expected to ensure that: Access to information is based on a “need to know” and is the minimum necessary to properly perform assigned duties. Use or disclosure shall not exceed the minimum amount of information needed to accomplish an intended purpose. Reasonable efforts, consistent with Albany Med Center policies and standards, shall be made to ensure that information is adequately protected from unauthorized access and modification.

Department/Unit: Medical/Surgical Hospitalist - E4 Work Shift: Day (United States of America) Salary Range: $83,200.00 - $93,184.00 The clinical Nurse contributes to the creation of a compassionate and caring environment for patients, families and colleagues through displays of kindness and active listening. Recognizes and appreciates that each employee’s work is valuable and contributes to the success of the Mission. Implements physician orders, administers medications, starts IVs, performs treatments, procedures and special tests, and document treatment as required by company policy and local/state/federal rules and regulations. • Orders, interprets, and evaluates diagnostic tests to identify and assess patients' conditions., • Assesses and evaluates patient needs for, and responses to, care rendered., • Applies sound nursing judgment in patient care management decisions., • Provides primary and emergency care for occupational and non-occupational injuries and illnesses., • Administers over-the-counter and prescription medications as ordered., • Collaborates with the nursing team to create a Plan of Care for all patients., • Directs and guides ancillary personnel and maintain standards of professional nursing. Thank you for your interest in Albany Medical Center! Albany Medical is an equal opportunity employer. This role may require access to information considered sensitive to Albany Medical Center, its patients, affiliates, and partners, including but not limited to HIPAA Protected Health Information and other information regulated by Federal and New York State statutes. Workforce members are expected to ensure that: Access to information is based on a “need to know” and is the minimum necessary to properly perform assigned duties. Use or disclosure shall not exceed the minimum amount of information needed to accomplish an intended purpose. Reasonable efforts, consistent with Albany Med Center policies and standards, shall be made to ensure that information is adequately protected from unauthorized access and modification.

Department/Unit: Colorectal Surgery & Urology - C2 Work Shift: Day (United States of America) Salary Range: $88,192.00 - $136,697.60 Salary Range: $36.73 - $60.93 Colorectal Surgery & Urology: The Colorectal Surgery and Urology Unit consists of 22 semi-private rooms. This Post-Surgical setting cares for patients that have undergone colorectal and urologic surgery. Procedures performed on unit : Assist with chest tube insertion, central lines, wound vac changes, NG, Cortrak, catheter, indwelling catheters. The Registered Professional Nurse assesses, coordinates, plans, directs, implements and manages the needs of assigned patients throughout the episode of care with a focus on progress toward discharge, including during transitions within the acute care stay. The nurse assures that competent, compassionate patient care is uniformly provided to customers including referring facilities, hospital staff and patients in the inpatient, ambulatory, and community settings. Essential Duties & Responsibilities include but not limited to : • Implements physician orders, administers medications, starts IVs, performs treatments, procedures and special tests, and document treatment as required by company policy and local/state/federal rules and regulations., • Orders, interprets, and evaluates diagnostic tests to identify and assess patients' conditions., • Assesses and evaluates patient needs for, and responses to, care rendered., • Applies sound nursing judgment in patient care management decisions., • Administers over-the-counter and prescription medications as ordered., • Collaborates with the nursing team to create a Plan of Care for all patients., • Directs and guides ancillary personnel and maintain standards of professional nursing. Minimum Qualifications : • Graduate of a professional academic nursing program in which a Diploma, Associate Degree or Baccalaureate Degree is conferred, • Must hold current NYS Registered Nurse license, • Obtains and maintains certification in BLS/ACLS/PALS/TNCC, • Ability to improve job performance through continuing education Thank you for your interest in Albany Medical Center! Albany Medical is an equal opportunity employer. This role may require access to information considered sensitive to Albany Medical Center, its patients, affiliates, and partners, including but not limited to HIPAA Protected Health Information and other information regulated by Federal and New York State statutes. Workforce members are expected to ensure that: Access to information is based on a “need to know” and is the minimum necessary to properly perform assigned duties. Use or disclosure shall not exceed the minimum amount of information needed to accomplish an intended purpose. Reasonable efforts, consistent with Albany Med Center policies and standards, shall be made to ensure that information is adequately protected from unauthorized access and modification.

Location: Saratoga Springs, NY.Shift/Schedule: Day shift: 7a-7:30p, every other weekend and holiday rotation.As part of the Albany Med Health System, we combine advanced technology with a deeply personal approach—creating a supportive environment for patients, staff, and providers alike.We believe

Job DescriptionDescription: Pay Rate: $45,000-$55,000 Reports to: Operations Supervisor or Manager The following consists of major duties, tasks, and responsibilities that make up the Lead work activities, which are expected to be carried out at VRC Companies, LLC (“VRC”). • The Lead position is responsible for supervising the day to day activities of VRC employees or contractors working on a given project in an organization, to ensure operations run seamlessly., • The Lead works closely with the team to monitor and evaluate the daily performance of workers and ensure that work equipment is available when needed., • The Lead will ensure the work environment is healthy and conducive for workers to carry out their duties without subjecting them to any harm or danger., • The position of Lead, will make it a priority to assess the performance of workers they supervise in order to identify areas that need to be perfected for the purpose of achieving best results for their warehouse., • Lead will inform workers of conditions at work, rules and regulations guiding the establishment to ensure that they adhere to company policies, and take disciplinary measures with workers when necessary., • Lead will make available all work related records such as attendance and efficiency scores to management for the purpose of production reports and performance reviews., • Lead will give workers detailed feedback on their level of performance most especially when they are not performing up to company expectations, in order for them to meet potential and improve production., • Lead will draft a shift schedule for workers, to ensure hours of operation are covered and to avoid frustration/agitation between workers over noncompliance by some team members., • Lead will verify and monitor the adherence to the established work schedule and report anyiInconsistencies. Requirements: Requirements – Qualities – Skills, Knowledge, and Abilities for the Position of Warehouse Lead • Good team skills to be able to work with others., • Good leadership skills., • Ability to fully carry out instructions., • Ability to management temperament., • Ability to multitask., • Good knowledge of record keeping., • Store and maintain items in their respective locations in a warehouse., • Handle and execute loading and unloading operations., • Pack and forward items from warehouse to assigned destinations., • Drive/Operate company trucks, vans, cars, picking and warehouse equipment., • Keep the warehouse/facility neat and tidy at all times., • Prepare and process all paperwork relating to shipping and receiving., • Assist and support customer service staff in maintaining and updating inventories., • Order and receive equipment and materials., • Prepare and process invoices.

Job Description Large Magnetics Assembly Technician: Come join us at Espey, where we're shaping the future. As industry leaders in manufacturing high-quality power conversion solutions, we specialize in serving mission-critical military and rugged industrial sectors for use in the most harsh & severe environments. With over 90 years of experience, Espey is synonymous with innovation and reliability, providing essential power supplies and transformers that ensure the safety of our military personnel. As a publicly traded company on the NYSE (ESP), we're committed to excellence across all facets of our operation, from design and development to testing and manufacturing. Located in the vibrant city of Saratoga Springs, NY, just 30 minutes from the state capital and within easy reach of major metropolitan centers like New York City, Boston, and Montreal, Espey offers a unique opportunity to be part of something extraordinary. If you're ready to shape the future and embark on a fulfilling career adventure, join us at Espey. Let's build together! About the job: Embark on a new career journey to shape the future as a Large Magnetics Assembler Technician, where you will be part of a team crafting transformers destined for military and industrial products. The Large Magnetics Assembler connects components to assemble transformers and other various fabricated items, as specified by work orders, diagrams, work instructions, or customer layouts. Unlock your operational skills and production finesse by creating products that protect today’s military. Large Magnetics Assembler Key Responsibilities including, but not limited to: • Build transformers and assemblies using drawings, work instructions, and other documentation., • Prepare and assemble wire connections using crimping, tinning, insulating, and other techniques., • Assemble components, subassemblies, or systems using hand and power tools (manual, electric, or pneumatic)., • Set up and build magnetic cores, steel laminations, and wound coils using stacking, banding, and interleaving methods., • Perform disassembly and rework/repair as needed., • Solder, braze, or epoxy components using soldering irons, torches, and appropriate tools., • Use fixtures, jigs, and calibrated measuring tools to ensure assembly accuracy and quality., • Clean and prep work surfaces for soldering, brazing, or applying adhesives., • Hermetically seal units using solder or braze techniques., • Collaborate with engineering and quality teams to support product improvements and compliance., • Enter data into ERP systems and complete documentation accurately., • Identify and report quality, safety, or equipment concerns to supervisors., • Follow SOPs, safety regulations, and quality standards., • Maintain a clean, organized work area and assist in general housekeeping tasks., • Participate in training and continuous improvement efforts., • Support team goals through effective communication and cooperation. Required Qualifications: • High School Diploma or GED equivalent, • Must be 18 years or older, • Must be able to work full time, • While performing the functions of this job, the employee is frequently required to sit, use hands to finger, handle or feel, and lift up to 50 pounds. The employee is occasionally required to stand, walk, reach with hands and arms, stoop, kneel crawl, talk or hear, and lift up to 100 pounds, • Previous experience in a manufacturing or industrial environments, • Previous experience with assembly or fabrication work prescribed by drawings, sketches, work instructions, • Basic mathematic skills including, but not limited to, addition, subtraction, multiplication, division, and determining ratios, • Ability to use measuring tools including a tape measure, caliper, torque wrench & height gage, • Previous technical training or relevant certifications, • Basic mechanical aptitude and willingness to learn new skills, • Ability to follow work instructions and work effectively in a team environment, • Attention to detail and commitment to quality, safety, and site and product security, • Good communication skills and ability to interact professionally with coworkers and supervisors, • Ability to lift and move heavy objects as needed, • Pay Rate $18.79 – $20.21 per hour, • Four –day work week, • Medical, Dental, Vision, & Life insurance with Employee assistance program, • Flexible spending account & Health savings account Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and expectations. Must be US Citizen Job Type: Full-time Pay: $18.79 - 20.21 per hour Benefits: • Dental insurance, • Employee assistance program, • Flexible spending account, • Health insurance, • Life insurance, • Paid time off, • Tuition reimbursement

Job DescriptionJob description About Espey: Come join us at Espey, where we're shaping the future. As industry leaders in manufacturing high-quality power conversion solutions, we specialize in serving mission-critical military and rugged industrial sectors for use in the most harsh & severe environments. With over 90 years of experience, Espey is synonymous with innovation and reliability, providing essential power supplies and transformers that ensure the safety of our military personnel. As a publicly traded company on the NYSE (ESP), we're committed to excellence across all facets of our operation, from design and development to testing and manufacturing. Located in the vibrant city of Saratoga Springs, NY, just 30 minutes from the state capital and within easy reach of major metropolitan centers like New York City, Boston, and Montreal, Espey offers a unique opportunity to be part of something extraordinary. If you're ready to shape the future and embark on a fulfilling career adventure, join us at Espey. Let's build together! About the job: Embark on a journey to shape the future as an Espey Transformer Design Engineer, crafting cutting-edge transformers destined for military and industrial products. Dive into this dynamic role where you’ll lead and collaborate on design efforts within a project development cycle that ranges from a few weeks to over a year depending on the product type and project scope. Unlock your engineering prowess, business acumen, and production finesse by designing unique and custom products, and collaborate across functions to watch your design come to life. Key Responsibilities including, but not limited to: · Design transformers ranging from small PCB mount to 5 MVA including medium voltage dry type from 60Hz to medium frequency · Design Inductors and Reactors for low and high frequency applications from 60Hz-500kHz · Support design studies for novel transformer design concepts for high power density applications · Develop new, custom magnetics, lead product estimates, & create design documentation based on customer Statements of Work (SOW) and performance specifications. · Provide start to finish ownership of magnetic components – from specification to design, prototype, testing and manufacturing. · Interface with drafting to develop documentation packages to be used for production builds, creating test procedures, and technical reports · Read & understand customer specification and interpret impact on design · Aid in troubleshooting new and legacy transformer product builds · Lead, participate in, and mentor others with magnetic design efforts, core selection, winding methods, insulation systems, & performance estimates · Work with mechanical engineers to develop design reports, review packages, and test procedures & tactics Required Qualifications: · Bachelor of Science in Electrical Engineering or equivalent field of engineering · Minimum 5 years of experience in transformer and magnetic devices · Must be US citizen with ability to secure a US Government security clearance; Applicants must meet eligibility requirements for access to export controlled data. Preferred Qualifications: · Experience in ruggedized products for Military & heavy industrial magnetics or power electronic applications · Experience with magnetics, transformers, inductors, or MILSPEC products for airborne, ground mobile, or Naval applications · Knowledge of Excel, Solidworks, FEA methods, MATLAB or equivalent software · Demonstrated experience with unique & custom design techniques without overreliance on auto-generated software programs · Experience in designs with BIL requirements up to 15kV class and knowledge of dry type transformers up to 5MVA · Experience with core selection, winding design, conductor selection (Litz/Foil/Solid), loss modeling and loss characterization in inductors and transformers. · Knowledge of ANSI/IEEE standards and experience with military standards such as MIL-E-917 · Writing skills that enable technical reports, test procedures, trade studies, and other technical documentation to be quickly and effectively released to customers. · Comfortable navigating complexity and troubleshooting unique problems; requires critical thinking, innovation, determination & resilience, and cross-functional partnerships · Competencies include project management, team leadership, independence balanced with strong cross-functional collaboration skills, bias for action, creativity, engineering prowess, & strong written and verbal communication skills Perks at Espey: · Pay Range $85,000 - $140,000 depending on depth of skills and experience · Four –day work week · Onsite preferred (Relocation provided); Hybrid work is possible; Remote for highly experienced contributors · 401(k) and Employee Stock Ownership Plan (ESOP) · Medical, Dental, Vision, & Life insurance with Employee assistance program · Flexible spending account & Health savings account · Tuition reimbursement HYBRID work is possible Must be US Citizen An Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. Job Type: Full-time Pay: $85,000.00 - $120,000.00 per year Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee assistance program, • Flexible schedule, • Flexible spending account, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Tuition reimbursement, • Vision insurance Schedule: • 10 hour shift Work Location: In person

Job Description Small Magnetics Assembler Technician Come join us at Espey, where we're shaping the future. As industry leaders in manufacturing high-quality power conversion solutions, we specialize in serving mission-critical military and rugged industrial sectors for use in the most harsh & severe environments. With over 90 years of experience, Espey is synonymous with innovation and reliability, providing essential power supplies and transformers that ensure the safety of our military personnel. As a publicly traded company on the NYSE (ESP), we're committed to excellence across all facets of our operation, from design and development to testing and manufacturing. Located in the vibrant city of Saratoga Springs, NY, just 30 minutes from the state capital and within easy reach of major metropolitan centers like New York City, Boston, and Montreal, Espey offers a unique opportunity to be part of something extraordinary. If you're ready to shape the future and embark on a fulfilling career adventure, join us at Espey. Let's build together! About the job: Embark on a new career journey to shape the future as a Small Magnetics Assembler Technician, where you will be part of a team crafting transformers destined for military and industrial products. The Small Magnetics Assembler connects components to assemble transformers and other various fabricated items, as specified by work orders, diagrams, work instructions, or customer layouts. Unlock your operational skills and production finesse by creating products that protect today’s military. Key Responsibilities – Small Magnetics Assembler: • Wind coils for military and commercial use by following wiring diagrams, work orders, and specifications, • Determine wire type, size, and finished dimensions based on job documentation, • Set up coil-winding machines and adjust wire tension, counters, and forming tools as needed, • Monitor winding process to ensure proper shape, turns, and consistency, • Strip, bend, shape, and tin leads; solder wires to terminals and apply insulation sleeves, • Finalize and clean completed coils before moving to the next production stage, • Accurately complete documentation and input data into ERP system, • Work with engineering to support quality, product improvement, and compliance, • Report quality issues, equipment malfunctions, or safety concerns promptly, • Follow all SOPs, safety regulations, and quality standards, • Maintain a clean, organized workspace and participate in continuous improvement initiatives · High School Diploma or GED equivalent · Must be 18 years or older · Must be able to work full time · While performing the functions of this job, the employee is frequently required to sit for long periods of time, have use of hands to finger with dexterity, handle or feel, reach with hands and arms, and lift up to 25 pounds. The employee is occasionally required to stand, walk, stoop, kneel, crouch or crawl, talk or hear, and lift up to 50 pounds. Close vision, ability to adjust focus, and color vision are all required for this position. · Must be US citizen with ability to secure a US Government security clearance; Applicants must meet eligibility requirements for access to export controlled data. Preferred Qualifications: • Manufacturing or assembly experience using drawings, sketches, or work instructions, • Basic mechanical aptitude and ability to follow written and verbal directions, • Strong communication skills; able to read, write, and present information clearly, • Proficient in basic math, including fractions, decimals, percentages, and interpreting simple graphs, • Problem-solving skills and ability to work with minimal variables in structured situations, • Team-oriented, detail-focused, and committed to quality and safety, • Physically capable of lifting/moving heavy objects, • Flexible with work hours and available for overtime as needed Perks at Espey: · Pay Rate $ 17.52 - $18.83 per hour · IBEW Union Pension Plan · Four –day work week · Medical, Dental, Vision, & Life insurance with Employee assistance program · Flexible spending account & Health savings account · Tuition reimbursement for qualified curriculum An Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and expectations. Job Type: Full-time Pay: $17.52 - $18.83 per hour Benefits: • 401(k), • Dental insurance, • Employee assistance program, • Health insurance, • Life insurance, • Paid time off, • Vision insurance Schedule: • 10 hour shift People with a criminal record are encouraged to apply Ability to Commute: • Saratoga Springs, NY 12866 (Required) Ability to Relocate: • Saratoga Springs, NY 12866: Relocate before starting work (Preferred) Work Location: In person

Job Description Job Posting: Swing Manager This job posting contains some information about what it is like to work in a McDonald’s restaurant, but it is not a complete job description. People who work in a McDonald’s restaurant perform a number of different tasks every day, and this posting does not list all of the essential functions of this job. McDonald's restaurants are staffed by great people, and right now we're looking for more of them. In this role, you would oversee shifts every week and make sure customers get a fast, accurate, friendly experience every visit. You would provide leadership to Crew and other Managers during a shift to ensure outstanding Quality, Service and Cleanliness to customers. DUTIES & RESPONSIBILITIES: -Supervising food safety & cleanliness procedures to ensure the team is meeting McDonald's standards -Communicating effectively with Crew and Shift Managers to help them prepare to run a great shift -Achieving targets during their shifts and help departments meet their goals -Taking action to monitor safety, security, inventory and profitability -Managing Crew schedules and encouraging high performance during their shift -Providing exceptional customer service and quality food production -Training new team members on critical job functions QUALIFICATIONS: -Demonstrate and reinforces leadership behaviors -Works as a member of a team -Ability to Read & Write -Ability to accurately count money -Knowledge of all areas in the restaurant -Food Handlers Certification -Understands, follows and enforces all Policies & Procedures -Completed all FRED Training learning modules -Attend McDonald’s “Leadership Transitions” class BENEFITS: -Flexible schedule, you must be willing to work weekends and holidays! -7 days of Paid Time off -Employee Discount -Paid training and career advancement opportunities -Uniforms provided -McDonald's can help you grow with our Archways to Opportunity education programs that offer high school completion courses, upfront college tuition assistance and English Language courses. By applying to this position, I understand that I am applying to work at a restaurant that is owned and operated by an independent franchisee, not McDonald’s USA. I understand that this franchisee is a separate company and a separate employer from McDonald’s USA. Any information I provide in this application will be submitted only to the independent franchisee, who is the only company responsible for employment matters at this restaurant. I recognize that the independent franchisee alone will make all decisions concerning employment matters, including hiring, firing, discipline, supervision, staffing and scheduling. By applying for a job at a franchisee operated restaurant, I understand that the information I provide will be forwarded to the franchisee organization in order for that organization to reach out to me and process and evaluate my application. I acknowledge that McDonald’s USA will not receive a copy of my employment application and will have no involvement in any employment decisions regarding me, including whether I receive an interview or whether I am hired to work for the franchisee. I understand that I need to contact the franchise organization for information about its privacy practices.

Job Description Job Posting: Swing Manager This job posting contains some information about what it is like to work in a McDonald’s restaurant, but it is not a complete job description. People who work in a McDonald’s restaurant perform a number of different tasks every day, and this posting does not list all of the essential functions of this job. McDonald's restaurants are staffed by great people, and right now we're looking for more of them. In this role, you would oversee shifts every week and make sure customers get a fast, accurate, friendly experience every visit. You would provide leadership to Crew and other Managers during a shift to ensure outstanding Quality, Service and Cleanliness to customers. DUTIES & RESPONSIBILITIES: -Supervising food safety & cleanliness procedures to ensure the team is meeting McDonald's standards -Communicating effectively with Crew and Shift Managers to help them prepare to run a great shift -Achieving targets during their shifts and help departments meet their goals -Taking action to monitor safety, security, inventory and profitability -Managing Crew schedules and encouraging high performance during their shift -Providing exceptional customer service and quality food production -Training new team members on critical job functions QUALIFICATIONS: -Demonstrate and reinforces leadership behaviors -Works as a member of a team -Ability to Read & Write -Ability to accurately count money -Knowledge of all areas in the restaurant -Food Handlers Certification -Understands, follows and enforces all Policies & Procedures -Completed all FRED Training learning modules -Attend McDonald’s “Leadership Transitions” class BENEFITS: -Flexible schedule, you must be willing to work weekends and holidays! -7 days of Paid Time off -Employee Discount -Paid training and career advancement opportunities -Uniforms provided -McDonald's can help you grow with our Archways to Opportunity education programs that offer high school completion courses, upfront college tuition assistance and English Language courses. By applying to this position, I understand that I am applying to work at a restaurant that is owned and operated by an independent franchisee, not McDonald’s USA. I understand that this franchisee is a separate company and a separate employer from McDonald’s USA. Any information I provide in this application will be submitted only to the independent franchisee, who is the only company responsible for employment matters at this restaurant. I recognize that the independent franchisee alone will make all decisions concerning employment matters, including hiring, firing, discipline, supervision, staffing and scheduling. By applying for a job at a franchisee operated restaurant, I understand that the information I provide will be forwarded to the franchisee organization in order for that organization to reach out to me and process and evaluate my application. I acknowledge that McDonald’s USA will not receive a copy of my employment application and will have no involvement in any employment decisions regarding me, including whether I receive an interview or whether I am hired to work for the franchisee. I understand that I need to contact the franchise organization for information about its privacy practices.

Job DescriptionJob description Job Description: Power Supply Design Engineer About Espey: Come join us at Espey, where we’re shaping the future. As industry leaders in manufacturing high-quality power conversion solutions, we specialize in serving mission-critical military and rugged industrial sectors for use in the most harsh & severe environments. With over 90 years of experience, Espey is synonymous with innovation and reliability, providing essential power supplies and transformers that ensure the safety of our military personnel. As a publicly traded company on the NYSE (ESP), we're committed to excellence across all facets of our operation, from design and development to testing and manufacturing. Located in the vibrant city of Saratoga Springs, NY, just 30 minutes from the state capital and within easy reach of major metropolitan centers like New York City, Boston, and Montreal, Espey offers a unique opportunity to be part of something extraordinary. If you're ready to shape the future and embark on a fulfilling career adventure, join us at Espey. Let's build together! About the job: Join our innovative engineering team as a Electrical Engineer, where you will design rugged, high-reliability power conversion solutions for military and industrial applications. You’ll play a key role in the design, analysis, and support of advanced AC-DC, DC-DC, and DC-AC systems, with output power levels exceeding 1KW. Our engineers take projects from concept to production, working in close collaboration with cross-functional teams and end customers. Electrical Engineer Key Responsibilities including, but not limited to: • Design and develop high-performance switch-mode power supplies (SMPS) for military and industrial use, • Utilize a range of converter topologies and control methods to optimize efficiency, power density, and reliability, • Conduct detailed circuit simulation, schematic capture, and design reviews using tools such as Altium and PSpice, • Ensure designs meet applicable EMI/EMC, thermal, and environmental requirements (MIL-STD-704, 461, 810), • Package designs for rugged environments including attention to shock, vibration, and thermal management, • Prepare documentation packages including schematics, bills of materials, test plans, and technical reports, • Troubleshoot issues during prototyping, validation, and production phases, • Interface with customers to interpret specifications and define custom solutions, • Lead or contribute to internal project teams and support qualification testing and certification efforts, • Bachelor’s Degree in Electrical Engineering (BSEE) or related field, • Minimum 5 years’ experience in the design and development of power electronics for high-reliability or MIL-spec applications · 8+ years’ experience in the design and development of power electronics • MSEE or advanced technical degree, • Familiarity with MIL-STD design practices (MIL-STD-704, 461, 810), • Experience with environmental and qualification testing, • Experience with magnetic design or transformer-based power systems, • Hands-on experience with thermal and mechanical integration of power systems, • Familiarity with DoD or defense contractor programs and lifecycle documentation, • Demonstrated experience with power levels exceeding 1KW and a strong understanding of SMPS topologies (e.g., full-bridge, push-pull, buck, boost), • Knowledge of EMI/EMC compliance standards, thermal design principles, and ruggedized packaging, • Proficient in power electronics simulation and design tools (PSpice, Altium, etc.), • Strong analytical and troubleshooting skills, • Pay Range: $65-120k, • Four-day work week, • 401(k) and Employee Stock Ownership Plan (ESOP), • Medical, Dental, Vision, & Life Insurance with Employee Assistance Program, • Flexible Spending Account & Health Savings Account, • Tuition Reimbursement Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and expectations. Job Type: Full-time Pay: $65 – 160k Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee assistance program, • Flexible spending account, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Retirement plan, • Tuition reimbursement, • Power electronics or industrial electronics: 5 years (Required) Pay: $65,000.00 - $160,000.00 per year Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee assistance program, • Health insurance, • Life insurance, • Paid time off, • Vision insurance Schedule: • 10 hour shift Ability to Commute: • Saratoga Springs, NY 12866 (Required) Ability to Relocate: • Saratoga Springs, NY 12866: Relocate before starting work (Required) Work Location: In person

Job Description The Brookmere Hotel and Regent Restaurant & Bar, opened in December 2024, situated just a mile from the Saratoga Racetrack and abutting Saratoga National Golf Course. The 10-acre site, formerly known as Longfellows Hotel, Restaurant, and Conference Center is home for the new 88-room upper-upscale hotel, full-service Restaurant and Bar with seasonal outdoor porch, Spa, Banquet facility with 6,000 sq.ft. of meeting and event space, and private access to Lake Lonely. Bonacio Construction leads the development, partnering with Hay Creek Hotels as managing partners. responsible for managing a hotel's financial operations and acting as a guest service representative during the overnight shift. They reconcile daily financial transactions, prepare reports, assist guests with check-in/out, and handle their requests. In essence, they maintain financial integrity and operational flow during the night. • High School diploma or equivalent., • Ability to operate smoothly and professionally under high stress situations. customer service experience a plus • knowledge of bookkeeping,, • computer literacy,, • strong organizational and communication skills., • They need to be detail-oriented, • able to multitask efficiently while working independently, often alone on the night shift. Benefits: • Insurance Benefit package including company-funded Medical, Dental, Vision, Life, Disability, Accident, and Critical Illness plans*, • Free Life Insurance of $25K from HCH*, • Tax-free Flex Spending Accounts for Medical Costs and Daycare Costs*, • Well card membership (up to 60% discounts on prescriptions, gym memberships, and more).*, • Competitive Paid Time Off including Vacation, Sick, Holiday Pay, and Personal Birthday*, • Complimentary Staff Meals Daily, • Weekly payroll schedule, • Competitive Wages with Cost-of-Living Adjustments and Annual Performance/Wage Reviews, • Lodging Discounts at any HCH Property (Employee forty-nine per night, Friends & Family eighty-nine per night), • Dining Discounts at any HCH Property (50% off food for employee and guests), • Spas, Golf Course, and Activities Discounts at any HCH Property, • Hospitality Discounts from our partners at the New England Inn & Resort Association and Historic Hotels of America, • Industry Travel Discounts through Working Advantage (rental cars, event tickets, local activities, etc.), • Supportive Culture that is fun and motivating, with open-door policy work environment, • Employee Recognition Program through 'Delight Dollars' appreciation and prizes, • Free Parking