Trabajos Construction & Trades en Saratoga Springs, New YorkCrear alertas

POSITION SUMMARY: The Stationary EquipmentTechnician performs repairs and maintenance on recycling equipment, compact heavy equipment and light trucks to maximize safe and productive operations. Typical repairs include, but are not limited to, routine maintenance and repair of hydraulic systems, industrial electrical systems, 480V balers, conveyor systems and compactors. PRINCIPAL RESPONSIBILITIES: • Diagnoses mechanical problems using charts, diagnostic software, technical manuals and expertise., • Performs repairs and maintenance on recycling equipment, compact heavy equipment and light trucks to maximize safe and productive operations., • Repairs or replaces parts, such as pistons, rods, gears, valves, and bearings, using mechanic's hand tools., • Replaces conveyor belts, electrical motors, hydraulic cylinders and other mechanical parts., • Reads and interprets VCRs (vehicle condition reports) and/or repair orders, communicates with supervisor and/or equipment operators for clarification of problems. May discuss preventive techniques with equipment users and vehicle drivers to minimize future repairs., • Completes paperwork associated with repairing vehicles, documenting parts usage, and accounting for applied times (work order times versus time card times)., • Complete daily consumables report to record hours, fuel and oil usage, and provide information for input in Republic Services Dossier (Fleet Management Software) system., • May repair and install plumbing, electrical and HVAC systems., • Follows all safety policies and procedures., • Performs repairs and preventative maintenance on rolling stock (forklift, skid steers, trailers and front loaders)., • Performs other job-related duties as assigned or apparent. PREFERRED QUALIFICATIONS: • PLC troubleshooting and problem solving ability with practical, mechanical and electrical aptitude., • Prior experience in a manufacturing environment., • Prior experience working with conveyors., • Valid driver’s license., • Mechanical or trade school certificate., • High school diploma or G.E.D. MINIMUM REQUIREMENTS: • Minimum of 1 year of related equipment maintenance and repair or trade school certification. Pay Range: $29.16 - $43.74 Bonus Plan Details (if applicable): Rewarding Compensation and Benefits Eligible employees can elect to participate in: • Comprehensive medical benefits coverage, dental plans and vision coverage., • Health care and dependent care spending accounts., • Short- and long-term disability., • Life insurance and accidental death & dismemberment insurance., • Employee and Family Assistance Program (EAP)., • Employee discount programs., • 401(k) plan with a generous company match., • Employee Stock Purchase Plan (ESPP). The statements used herein are intended to describe the general nature and level of the work being performed by an employee in this position, and are not intended to be construed as an exhaustive list of responsibilities, duties and skills required by an incumbent so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the Company. Republic Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, protected veteran status, relationship or association with a protected veteran (spouses or other family members), genetic information, or any other characteristic protected by applicable law. ABOUT THE COMPANY Republic Services, Inc. (NYSE: RSG) is a leader in the environmental services industry. We provide customers with the most complete set of products and services, including recycling, waste, special waste, hazardous waste and field services. Our industry-leading commitments to advance circularity and support decarbonization are helping deliver on our vision to partner with customers to create a more sustainable world. In 2023, Republic’s total company revenue was $14.9 billion, and adjusted EBITDA was $4.4 billion. We serve 13 million customers and operate more than 1,000 locations, including collection and transfer stations, recycling and polymer centers, treatment facilities, and landfills. Although we operate across North America, the collection, recycling, treatment, or disposal of materials is a local business, and the dynamics and opportunities differ in each market we serve. By combining local operational management with standardized business practices, we drive greater operating efficiencies across the company while maintaining day-to-day operational decisions at the local level, closest to the customer. Our customers, including small businesses, major corporations and municipalities, want a partner with the expertise and capabilities to effectively manage their multiple recycling and waste streams. They choose Republic Services because we are committed to exceeding their expectations and helping them achieve their sustainability goals. Our 41,000 team members understand that it's not just what we do that matters, but how we do it. Our company values guide our daily actions: • Safe: We protect the livelihoods of our colleagues and communities., • Committed to Serve: We go above and beyond to exceed our customers’ expectations., • Environmentally Responsible: We take action to improve our environment., • Driven: We deliver results in the right way., • Human-Centered: We respect the dignity and unique potential of every person. We are proud of our high employee engagement score of 86. We have an inclusive and diverse culture where every voice counts. In addition, our team positively impacted 4.6 million people in 2023 through the Republic Services Charitable Foundation and local community grants. These projects are designed to meet the specific needs of the communities we serve, with a focus on building sustainable neighborhoods. STRATEGY Republic Services’ strategy is designed to generate profitable growth. Through acquisitions and industry advancements, we safely and sustainably manage our customers’ multiple waste streams through a North American footprint of vertically integrated assets. We focus on three areas of growth to meet the increasing needs of our customers: recycling and waste, environmental solutions and sustainability innovation. With our integrated approach, strengthening our position in one area advances other areas of our business. For example, as we grow volume in recycling and waste, we collect additional material to bolster our circularity capabilities. And as we expand environmental solutions, we drive additional opportunities to provide these services to our existing recycling and waste customers. Recycling and Waste We continue to expand our recycling and waste business footprint throughout North America through organic growth and targeted acquisitions. The 13 million customers we serve and our more than 5 million pick-ups per day provide us with a distinct advantage. We aggregate materials at scale, unlocking new opportunities for advanced recycling. In addition, we are cross-selling new products and services to better meet our customers’ specific needs. Environmental Solutions Our comprehensive environmental solutions capabilities help customers safely manage their most technical waste streams. We are expanding both our capabilities and our geographic footprint. We see strong growth opportunities for our offerings, including PFAS remediation, an increasing customer need. SUSTAINABILITY INNOVATION Republic’s recent innovations to advance circularity and decarbonization demonstrate our unique ability to leverage sustainability as a platform for growth. The Republic Services Polymer Center is the nation’s first integrated plastics recycling facility. This innovative site processes rigid plastics from our recycling centers, producing recycled materials that promote true bottle-to-bottle circularity. We also formed Blue Polymers, a joint venture with Ravago, to develop facilities that will further process plastic material from our Polymer Centers to help meet the growing demand for sustainable packaging. We are building a network of Polymer Centers and Blue Polymer facilities across North America. We continue to advance decarbonization at our landfills. As demand for renewable energy continues to grow, we have 70 landfill gas-to-energy projects in operation and plan to expand our portfolio to 115 projects by 2028. RECENT RECOGNITION • Barron’s 100 Most Sustainable Companies, • CDP Discloser, • Dow Jones Sustainability Indices, • Ethisphere’s World’s Most Ethical Companies, • Fortune World’s Most Admired Companies, • Great Place to Work, • Sustainability Yearbook S&P Global

A Brief Overview A Technician Trainee will be trained and educated to become a proficient auto glass technician. Upon completing our training program, the trainee will receive the Safelite SafeTech certification and will possess fundamental skills necessary for performing unsupervised glass repair, replacement and recalibrations. The trainee is expected to embody the Safelite Spirit with a can-do attitude, caring heart and service mindset while striving to bring unexpected happiness to customers by completing jobs timely and with the highest quality standards. What you will do • Be paid to learn and apprentice the Safelite way, through hands-on and classroom training, including:, • Observing and assisting in installing and repairing auto glass, • Recalibrating automotive safety systems, including trouble-shooting and completing diagnostic testing, • Providing additional services & products, • Study and pass testing to become a Safelite-certified Technician showing proficiency in installations, embracing a positive attitude and following taught techniques., • Safely operate company and customer vehicles, company-issued tools and chemicals utilized throughout the workday., • Performs other duties as assigned, • Complies with all policies and standards What you’ll get: • Competitive weekly pay starting at $21.25/hour, increasing to $25.25/hour after training and certification., • Earn $5/set of wiper blades when added for customer safety., • A benefits package valued at more than $10k*. Includes 401(k) plan with company matching, medical plans, paid time off, holidays & volunteer days., • Program to buy additional PTO or sell unused time up to 16 hours., • Up to $5,250 annually in tuition reimbursement., • Paid training and all the tools and resources you'll need to be successful. Education Qualifications • High School Diploma GED/Equivalent Preferred, • Valid state-issued driver’s license any other license(s) (as required by federal, state and local laws) to operate a company vehicle. Required Experience Qualifications • Must be 18 years of age or older Required Skills and Abilities • Ability to regularly lift and carry up to 35 pounds and occasionally lift and carry up to 50 pounds., • Ability to stand for extended periods, work in tight spaces, bend and twist body, • Ability to use a variety of hand tools and power tools safely and effectively, • Ability to operate a motor vehicle in accordance with all federal, state and local laws and agreement to be monitored via in-cab vehicle safety camera / video surveillance technology, • Maintains professionalism and passion for providing outstanding customer service and exceeding customer expectations, • Ability to safely work outside (in a wide variety of weather conditions and extreme temperatures) for extended periods, • Ability to work with chemicals (including but not limited to flammable chemicals), as applicable per the “Safelite Way of Fitting”, • Ability to work scheduled days, with flexibility on start and end times to accommodate customer’s needs, • Proficiency in using computerized diagnostic tools to complete recalibrations and trouble-shoot issues, • Problem-solving and ability to trouble-shoot issues, independently and collaboratively, • Ability to read, write and interpret the English language and technical directions, • Ability to communicate orally (via phone) and written (via computer or other electronic means), • Ability to maintain a professional appearance, adhering to Company dress code and PPE policies, • Willingness and ability to maintain stable performance under professional or personal pressure and/or opposition (e.g., time pressure and productivity measures). #LI-AK1 This job description in no way states or implies that these are the only duties to be performed by an employee occupying this position. Employees may be required to perform other related duties as assigned to ensure workload coverage. This job description does NOT constitute an employment agreement between the employer and employee and is subject to change by the employer as the organizational needs and requirements of the job change. This position description is not all inclusive for every aspect of this role. Reasonable accommodations will be made for individuals covered by ADA, ADEA, FMLA and other laws and regulations in accordance with their requirements. Physical and mental demands are not, and should not be construed to be job qualification standards, but are illustrated to help the employer, employee and/or applicant identify tasks where reasonable accommodations may need to be made when an otherwise qualified person is unable to perform the job’s essential duties because of an ADA disability. Other qualifications may be required to ensure employment eligibility in accordance with local laws, regulations and with Safelite Group, Inc. policies and practices. -- Internal Associates: Already a member of the Safelite team? Apply through your Workday account by searching "Find Open Jobs". Diversity: Safelite welcomes everyone. We value our diverse workforce and suppliers, and we’re proud to be an equal opportunity employer. Learn more at Careers Benefit amounts are estimates only. Actual values will depend on benefit elections during enrollment. This position description is not all inclusive for every aspect of this role. Reasonable accommodation will be made for individuals covered by ADA, ADEA, FMLA and other laws and regulations in accordance with their requirements. Physical and mental demands are not and should not be construed to be job qualification standards, but are illustrated to help the employer, employee and/or applicant identify tasks where reasonable accommodations may need to be made when an otherwise qualified person is unable to perform the job’s essential duties because of an ADA disability.

Position Overview Family owned company with 30+ year history and a strong backlog of projects seeks an experienced civil estimator to join their growing team. Key Responsibilities • Prepare detailed cost estimates for civil construction projects including earthwork, pump stations, wastewater treatment facilities, and more., • Analyze project plans and specifications to determine scope of work and required resources., • Collaborate with project managers and engineers to gather project information and clarify requirements., • Utilize estimating software such as HCSS and Carlson to generate estimates., • Conduct market research to assess material and labor costs for various civil construction tasks., • Review and analyze subcontractor bids and proposals to ensure compliance with project requirements., • Assist in the preparation of bid proposals and presentations for clients., • Monitor project budgets and provide regular updates on potential cost overruns or savings. Required Qualifications • 5+ years civil estimating experience Preferred Qualifications • Bachelor's degree in Civil Engineering, Construction Management, or a related field., • Utility or process piping experience strongly preferred, • HCSS, Carlson (or similar) software experience a plus Benefits • Medical, dental, & vision insurance, • PTO, • 401k w/ company match, • Short and long-term disability insurance, • Life insurance, • Access to a company vehicle for field/site visits Email Your Resume In Word To Looking forward to receiving your resume through our website and going over the position with you. Clicking apply is the best way to apply, but you may also: • Please do NOT change the email subject line in any way. You must keep the JobID: linkedin : LD8-1802984 -- in the email subject line for your application to be considered.*** Josh McCullough - Executive Recruiter For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 05/20/2024 and applications will be accepted on an ongoing basis until the position is filled or closed. CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Benefits: Skidmore College offers employees generous benefits including health insurance plans, paid time off and holiday pay, a retirement savings plan, tuition benefits for employees and their dependents, paid medical leave, paid training, free CDTA bus pass, campus dining discounts, free parking,

We are seeking an experienced Construction Project Engineer to assist the Project Manager in analyzing blueprints, specifications, proposals, and other documentation to prepare time, cost, and labor estimates for products, projects or services. Construction Project Engineer Location(s): Saratoga Springs, NY Salary Range: 70K – 80K Permanent Position, Full Benefits: Yes Responsibilities: • Assist in the procurement of subcontractors and suppliers., • Reviews data/plans/specs. to determine material and labor requirements and prepares itemized lists., • Compute costs factors and prepares estimates used for pre-bid review., • Estimate costs factors and prepares estimate used for planning, organizing and scheduling work, preparing bids, selecting vendors or subcontractors and determining cost effectiveness., • May conduct studies to develop and establish standard hour and related cost data or effect cost reductions., • Represents the company at bid conferences, job progress meetings and other functions outside the company., • Orders materials for assigned jobs, set preliminary delivery schedules in cooperation with the General Superintendent and assigned PM., • Make necessary contact with subcontractors and their superintendents. In cooperation with the assigned PM and General Superintendent, establish a job schedule and a dependable working relationship., • Developing, monitoring, updating, and communicating the progress schedule and its periodic revisions… *If interested please send me a copy of your resume and a good time that you are available for a 20-minute call regarding the position and your qualifications. • If you are not available but you know someone that would be a good fit, please encourage them to apply.

Job DescriptionJobsRUs.com is a service-oriented staffing/recruiting company dedicated to working closely with our clients. We are currently hiring for Road Mechanics in Saratoga, NY. $28-36/hour DOE Monday to Friday 8am to 4.30pm with OT when available Job Duties -Diagnose problems; operate computer-based diagnostics on material handling equipment -Ensure proper planned maintenance is performed -Maintain adequate and accurate parts inventory on van -Strive to perform service jobs on time the first time -Utilize parts and service resources to properly repair equipment -Complete work orders punctually and with accuracy -Attend training and other professional development opportunities to grow skills and knowledge Requirements: JobsRUs.com Cares: *Pay Options: Direct Deposit, Paper Checks or pay cards; paid weekly *Health/Dental/Vision Insurance options compliant with the ACA *401k *Online Employee Portal to adjust withholdings and view and print pay stubs We look forward to working with you; JobsRUs.com Cares! APPLY Today! JobsRUs.com has over 8000+ associates in the United States in various verticals and industries with over 5000+ working in manufacturing, industrial, production, factory, distribution and/or warehouse roles ranging from the assembly, forklift, machine operator, warehouse, maintenance, packaging, order pick/pack and general labor.

Job Description Company Overview: LaBella Associates was established in 1978 and has been voted a Top Workplace for the last five years. We are headquartered in Rochester, NY with offices across New York, Ohio, Pennsylvania, Virginia, North and South Carolina, and Madrid, Spain. LaBella is a multi-disciplined architectural and engineering firm dedicated to client satisfaction through teamwork, respect, and trust. We provide services that take a project from start to finish—from an initial study to determine a project’s feasibility to construction administration and start up, and everything in between. Job Overview: We are currently seeking an experienced (2+ years) Regulated & Hazardous Building Materials Professional to support our growing program. This position requires an intermediate level of technical working knowledge of New York State Code Rule 56, as well as other federal, state, and local regulations pertaining to hazardous and regulated building materials. The ideal candidate will have experience with abatement project monitoring, building inspections and lead testing. An interest, understanding, or prior experience with mold and other environmental hazards is a plus. The ideal candidate will enjoy a mix of office and field time. LaBella offers excellent training and career advancement opportunities. Job Functions: • Perform on-site observations of environmental remediation projects under abatement/construction, and monitor the quality of work performed by engineers, consultants, contractors, and sub-contractors., • Perform asbestos-related functions including hazard assessments, surveys, submittal reviews, abatement plan and specification review, asbestos sampling, and survey report review., • Consult with other staff members on environmental questions arising from the review of plans, drawings and construction project problems and issues., • Prepare reports relating to assigned activities., • Assist in the development, compilation, and distribution of technical data. Work Environment: Workstation varies depending on assignment. Will require entry into containment areas. Use of appropriate personal protective equipment required at field sites, (i.e., respirators, disposable suits, boots, gloves, hard hats, and eye protection). Frequent travel may be required using rental vehicle, company vehicle, or personal vehicle. This travel may include overnight stays at public accommodations and related establishments. Job duties may require exposure to weather and temperature extremes, loud noises, heights (climbing ladders, scaffolding, etc.) and other work-safety hazards (chemicals, fumes, etc.) at a construction site. Must be able to pass annual physical examination to confirm ability to wear a respirator. Must be available to occasionally work a modified work schedule or extended workday hours, as necessary. Requirements • Associates or BS in a Science, Engineering or Construction related field., • 2+ years of environmental and/or construction experience., • Current NYSDOL and USEPA (Project Monitor/Air Technician, Inspector, Assessor, etc.) certifications preferred., • High interest in learning other environmental job duties. LaBella will provide required training. Salary Range: $45,000- $60,000 The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description Job Posting: Maintenance Person This job posting contains some general information about what it is like to work in this restaurant, but is not a complete description of all duties of the job. People who work in this restaurant perform a number of different tasks every day and this posting does not list every essential function of the job. DUTIES & RESPONSIBILITIES: -Filtering oil fryers daily -Maintaining outside grounds -Cleaning equipment, inside and outside windows, stock rooms and restrooms -Unloading delivery truck two - three times a week -Taking out and emptying trash compactor -Changing light bulbs -Cleaning HVAC/Exhaust units and roof of debris The Maintenance Person assists management in achieving and maintaining outstanding interior and exterior restaurant cleanliness and maintaining restaurant equipment. As a member of the Maintenance Team, your restaurant will support you with the tools and training needed to succeed. QUALIFICATIONS: -Have a positive attitude -Ability to work well in a fast-paced environment -Work as a member of a team -Manage Time effectively -Must be 18 years of Age -Experience performing routine maintenance. -Strong organizational and follow up skills. PHYSICAL REQUIREMENTS: This position can be physically demanding. The employee may be required to stand for extended periods of time, lift objects up to 30 lbs on a regular basis. BENEFITS: -Paid Time Off -Employee Discount -Medical, dental and vision coverage -Short and Long Term Disability, Life, and additional supplemental insurance options -Education through Archways to Opportunity including opportunities to earn a High School degree, college tuition assistance and English classes as a second language. This job posting is for a position in a restaurant owned and operated by an independent franchisee, not McDonald’s USA. This franchisee owns a license to use McDonald’s logos and food products, for example, when running the restaurant. However, this franchisee is a separate company and a separate employer from McDonald’s USA. Thus, if you are hired for the job described in this posting, the franchisee will be your employer, not McDonald’s USA. Only the franchisee is responsible for employment matters at the restaurant, including hiring, firing, discipline, supervisions, staffing, and scheduling employees. McDonald’s USA has no control over employment matters at the restaurant. McDonald’s USA will not receive a copy of your employment application and it will have no involvement in any employment decisions, including whether you receive an interview for the job or whether you are hired.

Job DescriptionPaul Davis Restoration and Remodeling - Ballston Spa, NY BASIC FUNCTIONS: Estimate or assist residential construction insurance claim repair projects and manage them to completion. SKILL REQUIREMENTS Hands on residential construction experience (5-10 years), job management and comfort working with laptop computers and estimating software . We will train the successful applicant on the technologies we use. Candidates with less experience but who show promise might be considered. This position has extensive interaction with customer and insurance account personnel. RESPONSIBILITIES/TASKS: • Professionally represent the PDR principles of honesty and integrity., • Perform duties with a sense of purpose and urgency., • Prepare estimate in a timely fashion (typically within 48-72 hours of the inspection or according to program requirements for specific losses/carriers)., • Negotiate and secure approved scope and price with insurer., • Process necessary paperwork and maintain relationship with customer and insurer., • Manage projects to completion and collect payments due the company. Celebrating our 34th year in business. Paid holidays, vacations, sick and personal time. Starting salary (60-70,000) plus incentive pay (depending on experience).

Job Description Do you have strong communication skills, are great with people, and have a strong work ethic? We may have the ideal job opportunity for you! Mangino Buick GMC is a well-respected, family-owned business in the Upstate NY area serving customers in New York, Vermont, and Massachusetts for over 20 years! Our thriving dealership is looking for talented, detail-oriented, and dedicated professionals to join our team and ensure the bright future of our franchise. If you are personable, energetic and of high integrity, this is a fantastic opportunity for you to take the next step in your automotive career. Pay $15 - $20 depending on experience and job performance. Benefits * • Health insurance – multiple options, • Dental insurance, • Vision insurance, • 401k retirement, • Paid sick leave., • Life Insurance, • Long-term Disability Insurance Drive the vehicle for testing purposes and inspect and refill fluid levels as necessary * Ensure tire pressure for proper inflation, clean and lubricate fittings as needed * Install a new oil drain plug and new oil filter and communicate oil levels to teammates * Maintain efficiency and accuracy in diagnosing as well as repairing vehicles * Repair or replace worn parts ahead of the vehicle’s breakdown or damage * Use power tools, machine tools, and common hand tools to perform various tasks Qualifications * High School Diploma or GED (required) • One year in a service department Valid driver’s license and clean driving record We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description34 year old national company looking for experienced carpenter for residential remodeling and restoration projects. Hiring as an employee preferred but will consider independent contractor/subcontractor. 6-8 years of residential building experience required. We offer year-round work and flexible scheduling options. Frequent overtime opportunities. For employees: paid holidays, vacation sick, 401k and personal time. Health ins available. APPLICANT REQUIREMENTS/GENERAL INFORMATION: Knowledge of and experience in residential construction required and some light commercial building is desirable.

Job Description Overview Rose Associates is your gateway to an exhilarating realm of real estate innovation. Our dynamic services platform spans development, management, leasing, and marketing, catering to private and institutional property owners globally. In the unparalleled market of New York City, where unique needs and challenges abound, we've solidified our position as the go-to industry leader. Established in 1925, Rose Associates boasts almost a century of New York real estate expertise, continuously expanding across the tri-state area. Join us on the forefront of innovation and growth – Rose Associates is where excitement meets opportunity! We are seeking a highly motivated and customer-focused Residential Property Handyperson to join our vibrant team and contribute to the overall maintenance, satisfaction and well-being of our residents. The ideal candidate will be proficient in a variety of repair and maintenance tasks, contributing to the overall well-being of the property and ensuring a safe and comfortable environment for residents. Essential Functions • Perform routine maintenance and repairs on residential units, including plumbing, electrical, HVAC, appliance repair, and carpentry tasks., • Address minor HVAC issues, Inspect, troubleshoot, and repair household appliances to ensure functionality and safety and collaborate with specialized technicians for major repairs. Coordinate with vendors for appliance replacements when necessary., • Paint and complete drywall repairs to maintain a fresh and appealing appearance throughout the property., • Repair and replace flooring materials as needed, ensuring a safe and aesthetically pleasing environment., • Perform routine maintenance on units in preparation of apartment turns, and maintain maintenance shop, including related inventory of supplies., • Conduct regular safety inspections, identifying and addressing potential hazards promptly., • Be available for on-call duties and respond to emergency maintenance requests outside regular working hours., • Comply with workplace safety and OSHA regulations., • Must be present on-site and be able to move throughout the building to address building related matters and meet with tenants, staff, vendors and visitors., • Ability to ascend and descend stairs, as well as positioning oneself in small spaces for building inspections and maintenance repairs and lifting and moving large or heavy objects in excess of 50 pounds., • High School diploma or equivalent and / or previous experience in a handyman capacity is preferred., • Knowledge of safety protocols, building codes and utilization of related machinery and tools is required., • Strong problem-solving skills and attention to detail., • Currently possesses EPA 608 Universal technical certification, S12, S13, S95, P99 or capable of obtaining the required certifications. tp0cBFUMqM

Job Description Mohawk Chevrolet is growing and currently seeking a technician to join our auto dealership as part of our Mobile Service department. This position involves operating our mobile service van and performing routine maintenance off-site. Prior automotive experience required. Benefits: • Generous compensation based on performance/experience (40 - 45k annually), • Benefits available – Health, Dental, Vision, 401k, Paid Time Off, • Positive and family friendly atmosphere, • Employee purchase plans, • Paid training and advancement opportunities, • Valid state-issued driver’s license and clean driving record required, • Automotive Quick Lube & Tire Technician/ Mechanic experience required, • Automotive Dealership experience preferred, but not required, • Perform routine automotive maintenance tasks including oil changes, diagnostic scanning, brake services, batteries, tire rotations, wipers, fluids, filters, lamps and bulbs, • Maintain a working knowledge of current industry best practices in automotive repair, • Conduct extensive diagnostic procedures to determine the sources of customers’ problems and provide accurate repair recommendations, • Conduct necessary repairs and take vehicles for test drives to verify soundness, • Maintain legible and accurate paperwork for both the customer and for our records, • Clean and maintain the work environment to ensure equipment longevity and workplace safety, • Operate a wide variety of cars, light trucks, and vans, with ability to drive both manual and automatic transmissions.

Job Description Job title Level 3 Technician Reports to Resource Manager Who we are ML Renewable Services LLC takes great pride in being one of the largest and most experienced crane businesses in North America. Our companies and branch locations are strategically positioned across the Rocky Mountain region, Southwest, Midwest, and East Coast of the United States where our knowledgeable team of professionals provide full-service solutions for their customers’ toughest challenges. Simply put: We know the crane business! Our values include Show up Hungry, don’t accept average, Think independently, and Lift as one. Job purpose The Level 3 Technician is a critical and active role to maintain optimal function and output at the wind site by managing a team of technicians working daily on turbine operations, required maintenance, safety, quality control and warranty repair(s). You will partner and communicate with the Field Supervisor and customer to execute contract requirements and timelines and ensure alignment with operational excellence. Duties and responsibilities • Perform assembly, commissioning, testing, repair, and maintenance on wind turbine generators and related equipment. Ability to return WTG to service., • Perform mechanical, electrical, and hydraulic component maintenance and repair., • Perform component retrofits and upgrades., • Oversee and assist preventive maintenance, daily operations, & large component replacement., • Complete required and accurate documentation associated with corrective and preventive maintenance of wind turbines and associated equipment; maintain records of documentation., • Troubleshoot, adjust, repair, and/or retrofit low to medium voltage electrical, mechanical, or hydraulic components and equipment, • Recognize occurrences of wind turbine error codes and report issues., • Assist with crane rigging and direction., • Perform wind turbine controller maintenance and repair., • Assist with high voltage system maintenance and repair along with ability to read and understand electrical schematics., • Utilize appropriate safety gear, protective equipment, and control or dissipation of energy sources to ensure work is performed in a safe manner., • Properly maintain tools and equipment used to perform assigned maintenance/installation assignments., • Maintain required training certifications and qualifications to enable personnel to safely perform work-related tasks in a quality & safe manner., • Other responsibilities as assigned., • Coordinating daily tasks according to priorities and plans, making changes when necessary due to weather, supply, delivery, and personnel., • Providing adequate guidance and feedback to meet project schedules, laws, regulations, best practices, and safety needs., • Emphasizing safe use of tools, machinery and equipment while providing training on safety gear, helmets, and procedures., • Resolving conflicts or miscommunications quickly and amicably., • Regularly reporting project status to supervisors, site engineers and other officials, • Supervise and train technicians., • Ability to supervise and lead a team., • Understand the project plans and specifications., • Reliable and punctual, • Maintain daily records of all significant project facts, events and conditions., • Must accurately track and report daily work hours for crew, equipment utilization and quantities of work performed. Qualifications Qualifications include: • 3-5 years wind turbine experience, • 1 year experience leading a crew, • Excellent communication and leadership skills., • Willingness to travel domestically: more than 80% of the time., • Must possess a valid, current driver’s license., • Experience using computers, tablets and applications related to email and timekeeping., • Must be able to communicate fluently in the English language, both verbally and in written form., • High School Diploma, • GWO Certified, • 3-5 Years wind turbine experience required. Working conditions The employee may be required to wear appropriate PPE equipment. The employee could occasionally be exposed to extreme temperatures, fumes, or airborne particles. The noise level in the workplace is moderate. Physical requirements • Ability to lift 50 lbs., • Ability to climb up to 375 ft., • Does not exceed 300lbs with full climbing equipment., • Work Remotely 80% of the time minimum. The Americans with Disabilities Act (ADA) requires employers to identify essential functions of a role. As a result, this job requires the employee to climb, stand, and lift and/or move up to 75 pounds. Reasonable accommodations may be made to enable individuals with disabilities to perform the tasks. Direct reports N/A EEO Statement ML Renewable Services LLC provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description Lia Nissan Saratoga is seeking a Level B & C Automotive Technician to join our team. If you're an experienced technician looking for a fast-paced, professional, and positive environment that rewards hard-working, reliable, and team-oriented individuals, this is the right place for you! Lia service departments are equipped with the latest technologies & equipment including service drive alignment checker, alignment rack, and Hunter tire mounting and balancing machines. COMPENSATION RANGE: $45K-$60K SIGN ON BONUS: Up to $2000 REQUIREMENTS: • 3+ years of Service Technician experience required, • Diagnostic, Electrical, and Engine Repair experience required, • State Inspection certification required, • Any Hyundai training or certifications preferred, • ASE Certification recommended, • Able to operate electronic diagnostic equipment, • Ability to learn new technology, repair, and service procedures and specifications, • Computer skills, • Ability to work in a fast-paced environment, • Perform work specified on the repair order with efficiency and in accordance with dealership processes, • Test-drive vehicles, and test components and systems using diagnostic tools and special service equipment, • Diagnosing, maintaining, and repairing vehicle automotive systems including engine, transmission, electrical steering, suspension, brakes, air conditioning, etc., • Communicate directly with the Service Advisor so that customers can be informed if any additional service is needed, providing an estimate of the time needed for additional repairs., • Medical, Dental and Vision, • 401K Plan with Employer Match, • ASE and state inspection certification reimbursement and all training expenses paid to further your career, • Continued education, manufacturer hands-on and web-based training, • Paid Time Off, • Paid Weekly, • An employer funded Life Insurance Plan, • Discounts on services and parts, • Employee vehicle purchase plans The Lia Auto Group is one of the top 100 automotive groups in the country, established in 1977 by Bill Lia Sr. The group consists of 21 dealerships throughout New York, Connecticut, and Massachusetts, offering a variety of manufacturers including Honda, Toyota, Hyundai, Nissan, Infiniti, Volkswagen, and Chrysler Jeep Dodge Ram (CJDR). Lia also provides rental and full-body repair services at the Lia Collision Center in Colonie, NY. The Lia Group Companies has since grown to include Vent Fitness, Lia Insurance Agency, BurgerFi, and various commercial properties including Hamilton Square shopping center in Guilderland, NY. Our team of over 1,500 dedicated staff members have delivered quality products and exceptional consumer experiences for over 40 years. With a long history of success and continuous expansion, the Lia Auto Group provides ample opportunity for development and growth to current and future employees. We offer competitive wages, generous benefits, and a rewarding, safety-conscious work environment. We seek those who can help us take our growth and service to the next level. COMMUNITY: We are heavily involved in supporting the communities we live in and work in and look for people to join us in volunteerism and fundraising efforts for many local charities and non-profit organizations.

Job Description Adirondack Tire & Mavis Tire - Automotive Mechanics Adirondack Tire & Service is proud to join the Mavis Tire family. We're looking for full-time Automotive Mechanics to join Team Mavis at one of our state-of-the-art automotive service and retail tire sales centers in the Saratoga Springs, NY area. With over 2,000 retail locations, Mavis is one of the largest tire sales and automotive repair chains in the United States. About the Position of Automotive Mechanic As Mavis's leaders in undercar repairs, our Automotive Mechanics are trusted to inspect, diagnose and perform a wide variety of automotive services on customers' vehicles. Mavis's Automotive Mechanics perform a wide variety of undercar repairs, including brakes, struts and shocks. Automotive Mechanics are also responsible for completing state-mandated inspections, changing oil and filters, checking fluids, replacing worn parts, and dismounting, mounting, rotating and balancing tires. Employee Benefits At Mavis, we understand that our people drive our success. We provide our team members with competitive weekly pay, including weekly incentive compensation, a good working environment and an excellent combination of additional benefits like health, dental and vision insurance, a 401(k) retirement savings plan with employer match, paid vacations, paid time off, paid holidays, life insurance, on-the-job training, and opportunities for career growth and advancement. Qualifications We recruit team members who share our commitment to providing complete customer satisfaction and delivering the highest quality service. To be eligible for the position of Automotive Mechanic, you must (1) be at least 18 years of age; (2) be legally authorized to work in the United States; (3) possess 2 years of experience and/or training in automotive repair and maintenance or any combination of education, training and experience which demonstrates the ability to perform the duties and responsibilities of the position; and (4) possess an extensive tool box of personal tools used in performing undercar repairs. The following additional qualifications are preferred: (1) state inspection license(s); and, (2) ASE Certifications in Automotive Maintenance and Light Repair (G1), Suspension and Steering (A4), and Brakes (A5). As an active position, Automotive mechanics are required to stand, walk, bend, kneel, stoop, crouch, crawl, climb, pull, reach and perform repeated and repetitive movements consistent with vehicle maintenance and automotive repair. Mechanics must regularly lift and/or move items weighing over 50 pounds. What are you waiting for? APPLY NOW! Candidates can apply online at . OPEN INTERVIEWS ARE AVAILABLE 7 DAYS A WEEK! Simply walk in during store hours for an immediate interview. If you have any additional questions, you may call the Recruitment department toll-free # at 844-375-3995. For more information about Mavis, please visit . Mavis is an Equal Opportunity Employer Consistent with our commitment to the principle of equal employment opportunity for all individuals, we enforce a zero-tolerance policy on discrimination at Mavis. Employment decisions are made without regard to an applicant's or employee's actual or perceived race, color, religion, creed, sex, pregnancy, sexual orientation, national origin, age, ancestry, ethnicity, disability, citizenship, alienage, marital status, domestic or civil union partnership status, familial status, caregiver status, military or veteran status, transgender status, gender identity or expression, genetic information, predisposing genetic characteristic, status as a victim of domestic violence, stalking and sex offenses, or any other status protected by applicable federal, state or local laws, regulations or ordinances. Exceptions or modifications to certain job duties and/or expected schedules may be provided for an employee who needs a reasonable accommodation for: (a) a sincerely held religious belief, observance or practice that conflicts with the expected schedule for a position; or (b) an otherwise qualified individual with a disability, unless such accommodation poses an undue hardship on our business, in accordance with applicable federal, state and local laws. Additional information is available by contacting . We will endeavor to make a reasonable accommodation / modification to the known physical or mental limitations of a qualified applicant with a disability to assist in the hiring process, unless the accommodation would impose an undue hardship on the operations of our business, in accordance with applicable federal, state and local laws. If you believe you require such assistance to complete this Application for Employment or to participate in the interview process, please contact our Employee Experience team at (914) 984-2500 ext. 5631. We also will endeavor to provide reasonable accommodation for a job applicant's or an employee's sincerely held religious beliefs, observances, or practices that conflict with a work requirement unless the accommodation poses an undue hardship to our business, in accordance with applicable federal, state and local laws. If you believe you require such an accommodation, please contact our Employee Experience team at (914) 984-2500 ext. 5631. In addition, applicants may report any instances of perceived discrimination through HRConnect either by calling toll-free at 1-877-628-4755 or by sending an email to . Job Posted by ApplicantPro

Job DescriptionCompany Description Monro’s family of brands is one of the leading automotive service and tire dealers in the United States. We work on approximately five million vehicles a year, but with us, it is personal. Every guest is important, and every teammate is valued. That is our people-first approach. Headquartered in our hometown of Rochester, New York, where our founder, Chuck August, opened his first store in 1957, we have grown to nearly 1,300 auto repair shops and tire dealers in 32 states from coast to coast. Monro powers 16 highly respected tire and auto service brands, supporting each company’s regional strength and community connections. From big cities to small towns to rural crossroads, you will find us in neighborhoods of every shape, size, and color. Under the Monro banner, we are united TEAM, and share the same mission to bring our guests the highest quality tire and auto service in the industry. Do you have what it takes to shape a better future for yourself and the automotive service industry? Our vision is to be America’s leading auto and tire centers, trusted by consumers as the best place in our neighborhoods for quality automotive maintenance and repairs. We’re looking for motivated individuals at every stage in their career who share our vision. Positions are available in our retail locations across our many brands, in field management, and in store operations at our Store Support Center in Rochester, New York. If you like helping others, as much as you like working on cars; if you enjoy being part of a team, solving problems, and building guest relationships, if you value honesty and integrity - we have a Destination for you at Monro. Destination Monro -Your Career is Here! Job Description About The Role: The Lube and Tire Technician at Monro or General Service Tech as we call it, is an entry level Automotive Technician position and a great way to start your career at Monro. Starting day 1 you will begin a comprehensive mechanic training program, covering all aspects of your new role. As a General Service Technician, you will be an essential team member, performing maintenance services on Guest vehicles. More importantly, you will be part of a team working together to deliver 5 Star Guest experiences, while using your technician skills to take care of people, their cars and ensure our guests have safe, reliable transportation. Salary Range: Up to $18.00 per hour - Based on experience. This role is eligible for additional compensation and incentives. Responsibilities: • Keyholder Duties include but not limited to, • Supervision of shop while Store Manager is not working, • Running end of day paperwork / cash handling, • Acting as assistant to the store manager in their duties and responsibilities, • Mechanic duties include changing, mounting, and installing tires, • Wheel removal, tire repair and balance, tire patch/plug repairs, • Quick lube type duties such as lubrication and oil change, • Inspect and rotate tires, • Basic automotive maintenance work such as battery installation, • We will train you to do alignments, brake services, and scheduled maintenance services Qualifications Qualifications: • High School Diploma or equivalent is preferred., • Automotive training including basic car maintenance and repair or the equivalent combination of education and experience., • Must possess a current valid driver’s license and have a satisfactory Motor Vehicle Report (MVR) and have the ability to operate customer’s vehicles to conduct test drives., • Ability to take initiative in identifying problems, collecting data, and establishing facts to make practical decisions and recommend solutions., • Strong customer service skills This job operates in an automotive shop environment. The job will have exposure to a moderate noise level, adverse weather conditions, chemicals, odors, dirt, and dust. General Service Technicians must be able to complete the following but not limited to: • Ability to work flexible hours, days, evenings, weekends, and holidays., • Must be able to see, and lift, carry and stock merchandise and supplies up to 50 lbs. without assistance., • Frequent standing and walking for long periods of time., • Frequent reaching overhead and below the knees, including squatting, bending, stooping, kneeling, twisting. Additional Information Benefits: • Performance based incentives, • Paid vacation and holidays for Full Time Teammates, • Reimbursement for ASE Certifications, • Reimbursement for State Inspection Licenses, where applicable, • 401k eligibility immediately upon hire, • Direct Deposit, • Employee Discounts, • Healthcare, Vision, and Dental for Full time Teammates, • Employee Access Perks Monro Inc. is proud to be an Equal Employment Opportunity / Affirmative Action employer. It is our policy to consider for employment all individuals regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, gender, sex, sexual orientation, gender identity and/or expression, genetic information, veteran status, or any other characteristic protected by federal, state, or local law. Your next Destination! Growth Opportunity: At Monro we’re committed to helping our teammates grow their career through the combination of coursework, demonstrating leadership skills and open opportunities. Our teammates receive on-the-job training, company sponsored certifications, as well as course curriculum in Monro University that empowers them to advance to the next level of their careers. Monro, Inc. is an equal opportunity employer and affords equal opportunity to all applicants for all positions without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Job DescriptionSalary: $28-$35/hour The Test Technician is an integral member of the G&G engineering team. Reporting to the Lead Product Engineer, this team member executes hands on engineering lab activities and is the first line of technical support for our customers. As part of a small, tight knit team, you will see the full product life cycle from new product testing to long term field reliability. This role calls for a strong excellent technical troubleshooting skills, a passion for hands on problem solving, and customer service orientation. Recently recognized as the fastest growing manufacturer in New York State and the most innovative company in New Yorks Capital Region, G&G Industrial Lighting is a manufacturer of industrial LED lighting products based in Malta, NY. Through relentless innovation and by doing business in alignment with our core values, G&G has grown to become the leading supplier of harsh environment lighting and lighting controls. G&G locally manufactures purpose-built products for the car wash, food processing, mass transit, and industrial markets. Who will I report to? Lead Product Engineer Salary: $28-35/hour Location: In-person - Ballston Spa, NY What am I accountable for? 1. Product Testing (40%) • Collaborate with engineering to develop and execute test plans for new and existing products., • Document test results by recording data and generating clear reports., • Communicate insights and feedback from testing to improve the design process. 2. Failure Analysis & Reliability (25%) • Lead the internal field return analysis process, including teardown, root cause determination, and documentation of findings., • Maintain accurate records of product returns and communicate trends and critical issues to engineering., • Support occasional customer site visits to audit field reliability and assist with complex troubleshooting. 3. Technical Customer and Product Support (25%) • Serve as one of the first points of contact for inbound technical support as a part time basis by phone and email, performing basic troubleshooting and escalating complex issues to the Lead Product Engineer., • Manage the warranty and returns (RMA) process by entering claims, coordinating hardware returns, and providing timely status updates., • Configure control systems to meet the needs of customers., • Coordinate with the Product Support Specialist to ensure coverage during peak periods. 4. Lab and Equipment Management (10%) • Maintain engineering lab facilities and ensure all test equipment is in good working order with appropriate calibrations., • Assist in planning test schedules based on project priorities and equipment availability., • Continuously improve engineering lab spaces to be efficient, organized, and safe. Key Measurables • Product teardown backlog., • On time completion of validation plans and clear reporting of results., • Percentage of assigned tasks or projects completed on schedule., • Support ticket first response time How do we show up every day? Positive Attitude • We approach our work with intention. We take pride in doing things right the first time. We lead with quality in everything we do. What will I need to succeed? • Must align with our Core Values, • 3+ years of experience in product testing, validation, or technical support ORan associate's degree in engineering, engineering technology, or a related technical field., • Basic knowledge of electrical and mechanical concepts., • Customer focused mindset with excellent written and verbal communication skills., • Proven hands on experience with strong knowledge of electrical and mechanical concepts., • Ability to thrive in a fast paced, hands on environment., • Proficiency with Microsoft Excel., • A Gets it Done attitude resourceful, adaptable, and able to drive projects to completion without constant oversight.

Job Description JOB FUNCTION: This position is responsible for the operation of tools and equipment in a variety of customer work sites for providing industrial and/or environmental cleaning. ESSENTIAL FUNCTIONS: 1. Strictly adhere to MPW Health and Safety Policies and Procedures., 2. Arrive at branch or jobsite on time, in uniform, properly groomed, mentally alert and physically able to work. Follow branch process for work schedule., 3. Set up jobsite including water blast hose, or vacuum hose, barricade tape and tags., 4. Use equipment such as, water blast gun, water lance, dry vacuum hose (6”and 8”), wet vacuum hose (6” and 8”), shovels, picks, automated tooling, aerial platform lifts and any other equipment needed., 5. Cleans equipment prior to return to MPW branch location., 6. Demonstrate initiative in execution of assigned tasks., 7. Performs other duties as assigned by immediate supervisor. QUALIFICATIONS: 1. Maintain valid ID to ensure access into customer sites., 2. Preferred specific exposure to an equipment or maintenance environment., 3. Experience performing manual labor in an outside setting., 4. Preferred 2-3 years of “hands on” experience with tools or heavy equipment. PHYSICAL REQUIREMENTS: 1. Ability to move up to 50 Lbs., with or without accommodation., 2. Ability to maintain a consistent workload that involves physical manual labor., 3. Ability to maintain alertness and fitness for duty., 4. Ability to position oneself for work conducted in and around confined spaces., 5. Ability to wear respirators in environments that may expose you to chemicals, fumes, etc., 6. Ability to maintain workloads that may include travel to a variety of states for days or weeks, and daily timeframes that could exceed the typical 8-hour shift.

Job Description This is a part-time position that will require working 24 - 28 hours per week, including the emergency on-call rotation. Overview Rose Associates is your gateway to an exhilarating realm of real estate innovation. Our dynamic services platform spans development, management, leasing, and marketing, catering to private and institutional property owners globally. In the unparalleled market of New York City, where unique needs and challenges abound, we've solidified our position as the go-to industry leader. Established in 1925, Rose Associates boasts almost a century of New York real estate expertise, continuously expanding across the tri-state area. Join us on the forefront of innovation and growth – Rose Associates is where excitement meets opportunity! We are seeking a highly motivated and customer-focused Residential Property Handyperson to join our vibrant team and contribute to the overall maintenance, satisfaction and well-being of our residents. The ideal candidate will be proficient in a variety of repair and maintenance tasks, contributing to the overall well-being of the property and ensuring a safe and comfortable environment for residents. Essential Functions • Perform routine maintenance and repairs on residential units, including plumbing, electrical, HVAC, appliance repair, and carpentry tasks., • Address minor HVAC issues, Inspect, troubleshoot, and repair household appliances to ensure functionality and safety and collaborate with specialized technicians for major repairs. Coordinate with vendors for appliance replacements when necessary., • Paint and complete drywall repairs to maintain a fresh and appealing appearance throughout the property., • Repair and replace flooring materials as needed, ensuring a safe and aesthetically pleasing environment., • Perform routine maintenance on units in preparation of apartment turns, and maintain maintenance shop, including related inventory of supplies., • Conduct regular safety inspections, identifying and addressing potential hazards promptly., • Be available for on-call duties and respond to emergency maintenance requests outside regular working hours., • Comply with workplace safety and OSHA regulations., • Must be present on-site and be able to move throughout the building to address building related matters and meet with tenants, staff, vendors and visitors., • Ability to ascend and descend stairs, as well as positioning oneself in small spaces for building inspections and maintenance repairs and lifting and moving large or heavy objects in excess of 50 pounds., • High School diploma or equivalent and / or previous experience in a handyman capacity is preferred., • Knowledge of safety protocols, building codes and utilization of related machinery and tools is required., • Strong problem-solving skills and attention to detail., • Currently possesses EPA 608 Universal technical certification, S12, S13, S95, P99 or capable of obtaining the required certifications., • Proficient in computer operations, particularly skilled in using Microsoft Office and Yardi software.Hourly Pay Range: $21.00 - $23.00 #jobopenings Powered by JazzHR LVSlJpq53K

Job DescriptionDescription: Lane Enterprises is excited to welcome a Mechanic to their team in Ballston Spa, NY! From generous benefits, including bonus opportunities and an Employee Stock Ownership Plan (ESOP), to great employee retention, this is a fantastic opportunity to join a thriving organization! Benefits: Lane offers a generous benefits package to include Medical, Dental, Vision, 401k, Paid Time Off, Paid Holidays, Company paid Life Insurance, Voluntary Life Insurance, ESOP opportunity and a generous bonus incentive plan. Job Summary: As a Mechanic you will oversee and perform the preventative and reactive maintenance duties required for the plant manufacturing operation. Essential Responsibilities: • Perform routine maintenance and repairs on machinery, equipment, and systems, • Perform routine maintenance and minor repairs on semi-trucks, forklifts and trailers, • Conduct inspections to identify and resolve issues in a timely manner, • Troubleshoot mechanical, electrical, and hydraulic problems, • Weld and fabricate parts as needed, is a plus, • Read and interpret blueprints, schematics, and technical manuals, • Maintain accurate records of maintenance activities, • Strong mechanical knowledge and proficiency in troubleshooting and repair techniques, • Familiarity with electrical systems, including wiring, motors, and control panels, • Ability to read and interpret technical drawings, blueprints, and schematics, • Proficient in welding and fabrication techniques, are a plus, • Knowledge of logic controllers and automation systems are a plus, • Minimum of 4 years of experience in facilities maintenance or a related field, • Minimum of 4 years of experience in minor semi-truck repairs including tires and brakes, • High School Diploma, GED or equivalent education preferred., • Must be able to lift loads of up to 100 pounds without the lift truck., • Ability to climb, bend, squat, kneel, crawl, and reach above shoulder level., • Ability to withstand varying temperatures., • Must be able to work in different positions for a very long period of time and ability to sit, stand, bend, kneel or walk for up to eight (8) hours at a time.

Job Description Heavy Equipment Mechanic |Direct Hire | Ballston Spa, NY | $22.00-55.00/hr. based on skills and experience |Monday-Friday 7:00am-3:30pm If you’re looking for a permanent Heavy Equipment Mechanic role, look no further! Kelly, in partnership with a client in the construction industry, is looking for an Heavy Equipment Mechanic in Ballston Spa, NY! This is a direct hire Heavy Equipment Mechanic position, meaning you will be hired permanently with our client and offered their competitive benefit and vacation package upon hire. Employee Benefits: · Health, Dental and Vision Insurance – premiums partially funded by organization · Life Insurance, short-term, long-term disability insurance paid by organization · 401(k) plan with 100% match on first 3%, and 50% match on the next 2% · Paid Vacation – 2 weeks first year increasing to 3 weeks after 5 years · Paid Holidays – Seven (7) + 1 Floating Holiday Position Information: · Conduct daily inspections and basic upkeep of heavy equipment such as dozers, excavators, skid steers, and wheel loaders to ensure optimal performance. · Monitor machine systems and quickly address any electrical, hydraulic, engine, or powertrain issues encountered during operation. · Utilize onboard monitoring systems and diagnostic technology to identify and resolve technical equipment problems. · Assist with minor repairs and participate in basic welding, fabrication, and disassembly tasks when necessary. · Accurately log equipment usage, maintenance activities, and incident reports in digital formats as required. · Maintain a clean and organized work area, adhere to safety protocols, use appropriate PPE, and communicate any hazards or equipment malfunctions to supervisors. Required Experience: · 2+ years of proven hands-on experience repairing and maintaining heavy construction equipment · Demonstrates strong mechanical and diagnostic skills with exceptional organization and attention to detail, consistently producing high-quality work. · Self-motivated and able to work independently while maintaining a professional, respectful attitude toward coworkers, supervisors, and clients. · Valid CDL-B license with active DOT Medical card required Company DescriptionKelly helps companies recruit and manage skilled workers and helps job seekers find great work in industries such as accounting and finance, education, engineering, government, manufacturing and production, technology, and more. Since inventing the staffing industry in 1946, we’ve become experts in the many specialties and local and global markets we serve. With a network of suppliers and partners around the world, we connect 450,000+ people with work every year. We ensure companies have the people they need, when and where they’re needed most. Kelly is committed to providing equal employment opportunities to all qualified employees and applicants regardless of race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or any other legally protected status, and we take affirmative action to recruit, employ, and advance qualified individuals with disabilities and protected veterans in the workforce. Requests for accommodation related to our application process can be directed to the Kelly Human Resource Knowledge Center. Kelly complies with the requirements of California’s state and local Fair Chance laws. A conviction does not automatically bar individuals from employment. Kelly participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S.Kelly helps companies recruit and manage skilled workers and helps job seekers find great work in industries such as accounting and finance, education, engineering, government, manufacturing and production, technology, and more.\r\n\r\nSince inventing the staffing industry in 1946, we’ve become experts in the many specialties and local and global markets we serve. With a network of suppliers and partners around the world, we connect 450,000+ people with work every year. We ensure companies have the people they need, when and where they’re needed most.\r\n\r\nKelly is committed to providing equal employment opportunities to all qualified employees and applicants regardless of race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or any other legally protected status, and we take affirmative action to recruit, employ, and advance qualified individuals with disabilities and protected veterans in the workforce. Requests for accommodation related to our application process can be directed to the Kelly Human Resource Knowledge Center. Kelly complies with the requirements of California’s state and local Fair Chance laws. A conviction does not automatically bar individuals from employment. Kelly participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S.

Job Description Mohawk Chevrolet is growing and currently seeking an experienced Automotive Technician to join our Auto Dealership. Prior Automotive Technician/ Mechanic experience required. Benefits: • Generous compensation based on performance/experience, • Benefits available – Health, Dental, vision, 401k, Paid Time Off, • Positive and family friendly atmosphere, • Paid training and advancement opportunities, • Valid NYS state-issued driver’s license and clean driving record required, • NYS Inspector's License, • Automotive Service Technician/ Mechanic experience required, • Performs work as outlined on repair order with efficiency and accuracy, in accordance with dealership and factory standards, • Diagnoses cause of most malfunctions and performs repair based on customer complaint, • Communicates with parts department to obtain needed parts, • Saves and tags parts of the job if under warranty or if requested by the customer, • Examines assigned vehicle to determine if further safety or service work is required or recommended, • Communicates with service advisor immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the promised time, • Documents all work performed and recommended on the repair order, • Determine proper labor times/quotes based on industry standards or repair manual labor times, • Road tests vehicles when required or refers to the test technician, • Participates in manufacturer-sponsored training programs, schools, and events, • Keeps abreast of manufacturer technical bulletins, • Supervises work of any apprentice technicians as assigned, • Reports machinery defects or malfunctions to supervisor, • Ensures that customers' cars are kept clean. Notifies service advisor immediately of anything that has happened to change the appearance or condition of the vehicle, • Keeps shop area neat and clean, • Maintains and is accountable for all dealership-owned tools and manuals. Returns them to the proper place and in the same condition as they were received, • Understands, keeps abreast of, and complies with federal, state, and local regulations such as hazardous waste disposal, OSHA Right-to-Know etc., • Operates all tools and equipment in a safe manner, • Reports any safety issues immediately to management, • Be punctual and a positive team player, • Other tasks as assigned

Job Description SENIOR MAINTENANCE TECHNICIAN Full Time | 8-4:30 pm Everything we do at The Wesley Community is guided by our Core Values which form the acronym "CARES". These Core Values are COMPASSION, ACCOUNTABILITY, RESPECT, EXCELLENCE and SPIRIT. It's more than a job: it's caring that starts in the heart. What will I do as a Senior Maintenance Technician for The Wesley Community? • Assist the director in preparing for and during annual survey., • Assist with management and oversight of the worxhub maintenance software program and assign tickets as necessary., • Follow-up on worxhub tickets to ensure they were completed to satisfaction., • Monitor maintenance personnel performance and productivity., • Coordinate projects needing additional oversight and planning when it will affect other departments or resident areas/services (ex; coordination of shutting down dish room when construction work is necessary)., • Respond immediately to resident and staff safety issues requiring priority work., • Assist in overseeing the general repair, reconditioning, and refurbishing of the facility, equipment, and systems in use., • Supervise the day-to-day maintenance functions of assigned personnel. Senior Maintenance Technician Requirements: • High School graduation or equivalency required., • Technical training in associated field preferred., • 5 years' experience in healthcare environment conducting maintenance work required., • Supervisory/Leadership experience required., • At least 3 years' experience required with reasonable aptitude/proficiency in HVAC, carpentry, plumbing, painting, wall repair, and mechanical and electrical knowledge. The Wesley Community strives to have its employees be a part of a culture of excellence and to enjoy their work. Our team is also committed to making sure our employees are rewarded for superior effort and performance and get a chance to have fun as part of their employment experience at The Wesley Community. We offer competitive and team-focused Employee Benefits to include: • Competitive pay + incentive compensation, • A full benefits package, • Paid vacation, sick, and personal time, • Paid Holidays, • Flexible scheduling options, • NEW Weekly Pay Periods and Daily Pay Option, • A 401K retirement plan, • Tuition assistance and nursing scholarships, • Opportunities for growth and development, • A caring and supportive team work environment, • Perks such as self-care support and on-site prescription fills, • A fun work environment including theme weeks, recognition events, and opportunities for staff involvement About the Wesley Community: For over 50 years, The Wesley Community has provided services and programs with a commitment to compassion, caring and excellence. Our distinctive continuum of care offers a unique balance of community living and care giving that ensures quality of life at every stage of life. We are a mission driven, not-for-profit organization that puts people first. We are proud of our reputation for excellence, innovation, and a personal approach to care and services. We encourage and support our residents in their efforts to achieve their goals, and we treat them respectfully.

Job DescriptionDescription: Now Hiring Automotive Technicians – All Skill Levels Welcome! Join the Team at Saratoga Honda – Where Careers Grow! Saratoga Honda is growing, and we’re looking for skilled, driven, and dependable Automotive Technicians to join our team! Whether you’re just starting out or a seasoned pro, we have a place for you. What We Offer: • Guaranteed 40+ Hours Per Week – Steady, reliable work year-round, • Competitive Pay – From $40,000 to $120,000+, based on experience and productivity, • Paid Training – Advance your career with factory-certified training and support, • Tool Allowance – We invest in your success, • Clean, Climate-Controlled Shop AIR CONDITIONED – Modern equipment and facilities, • Factory-Backed Support – Work with the latest Honda technology, • Growth Opportunities – Advance within our shop or dealership network We’re hiring for all levels – from entry-level Lube Technicians to Master Technicians. If you have a passion for cars, a strong work ethic, and a desire to keep learning, we want to hear from you. Why Saratoga Honda? We’re a family-owned, customer-focused dealership with a strong reputation for quality and trust. Our technicians are valued, supported, and rewarded for their work. Come be part of a team where your skills are appreciated and your career can grow. Location: Saratoga Springs, NY Apply Today! Send your resume or stop in to learn more – we’d love to meet you. Job Type: Full-time Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee discount, • Health insurance, • Paid time off, • Vision insurance Experience:

Job Description WGNSTAR is a dynamic and growing company with a global footprint. Primarily focused on the semiconductor industry, we provide a platform for you to expand your career with knowledge gained on the job training, and tailored development. We know we need talented people like you that hold similar values, which is why we do not put limits on learning, development, industry, and personal growth. Start your path to a WGNSTAR career today! Title: Maintenance Technician Level 2 Schedule: 12-hour Compressed Work Week. 4 Days on 3 Days Off, Rotating, Days or Nights (see below) Pay Rate: $20 -$21 Hourly + Overtime + 10% Shift premiums for night shift Location: Malta, NY Position Type: Full Time Benefits: This position is eligible for WGNSTAR’s full benefits package, including Medical, Dental, Vision, and 401(k). Additional benefits are listed at the end of this posting. Schedule: Compressed Work Week A Shift: Sunday, Monday, Tuesday, every other Wednesday off. 6:00am - 6:30pm B Shift: Sunday, Monday, Tuesday, every other Saturday off. 6:00pm - 6:30am C Shift: Thursday, Friday, Saturday, every other Wednesday off. 6:00am - 6:30pm D Shift: Wednesday, Thursday, Friday, every other Saturday off. 6:00pm - 6:30am Principal Duties and Responsibilities: • You will join a team to perform daily preventative maintenance tasks in a semiconductor cleanroom environment while wearing a cleanroom suit and other PPE., • You will be required to adhere to strict facility standard operating procedures with a focus on safety, quality, and effective team communication., • Your success will contribute to the facility’s overall throughput while simultaneously developing your own skills in a coveted and highly technical industry. Requirements:, • 1-2 years hands-on work experience in automotive repair, HVAC, or other mechanical/maintenance fields., • High School Diploma /GED, • Able to wear a full Cleanroom Suit and/or necessary Personal Protective Equipment., • Excellent timekeeping. Additional Benefits: Paid Vacation, Select Holidays, Overtime Opportunities, On-site Facilities & Career Development Opportunities. The people who thrive most at WGNSTAR are those individuals who perform well in a team environment, enjoy interacting and engaging with several different stakeholders, and adapt quickly to changing environments, while leveraging their skills, quality, and knowledge to drive themselves and their teams towards continuous improvement and success. This job description is intended to convey information essential to understanding the scope of the job and the general nature and level of work performed by job holders within this job. This job description is not intended to be an exhaustive list of qualifications, skills, efforts, duties, responsibilities or working conditions associated with the position. This position is not eligible for visa sponsorship. All applicants must be legally authorized to work in the United States without the need for current or future sponsorship (e.g., H-1B, O-1, etc). Additionally, WGNSTAR does not participate in the STEM OPT extension program for this role. Equal opportunities and Social Governance WGNSTAR is an Equal Opportunity Employer, drug free workplace, and complies with ADA regulations as applicable. WGNSTAR places an immense emphasis on equal employment, encourages diversity in the workplace, and applies an open-door policy for inclusion of all employees. Our diversity program encourages people from any gender, background, ethnicity, culture, education, and experience to join the company and more importantly build a career through employee development. Through our Global wellness programs, WGNSTAR ensures our employees and families have access to a full range of wellness services through our Employee Assistance Program (EAP). In the communities that surround our business operations, we support individual and group sponsorships for local sports and those that are vulnerable in society. Powered by JazzHR Onn8Id6MDJ

Job Description Mohawk Chevrolet is growing and currently seeking an Automotive Express Lube Technician to join our Auto Dealership. Prior Automotive Lube Technician experience required. Benefits: • Generous compensation based on performance/experience, • Benefits available – Health, Dental, Vision, 401k, Paid Time Off, • Positive and family friendly atmosphere, • Employee purchase plans, • Paid training and advancement opportunities, • Valid state-issued driver’s license and clean driving record required, • Automotive Quick Lube & Tire Technician/ Mechanic experience required, • Automotive Dealership experience preferred, but not required, • Certification from a vocational school or completion of apprenticeship is a plus, • Perform routine automotive maintenance tasks, including oil changes, tire rotations, transmission flushes, air conditioner re-charges, front-end alignments, battery installations, headlight/taillight installations and more., • Maintain a working knowledge of current industry best practices in automotive repair, • Conduct extensive diagnostic procedures to determine the sources of customers’ problems and provide accurate repair recommendations, • Inspect vehicles according to the state’s requirements for emissions and safety, • Conduct necessary repairs and take vehicles for test drives to verify soundness, • Maintain legible and accurate paperwork for both the customer and for our records, • Clean and maintain the work environment to ensure equipment longevity and workplace safety, • Operate a wide variety of cars, light trucks, and vans, with ability to drive both manual and automatic transmissions.

Job Description Lead Air Duct / HVAC Cleaning Technician Come work for the highest paying duct cleaning company in New York State. No prior experience is necessary. We will train you in how to clean air ducts and dryer vents. Take home $1000-$2000 per week. Base pay and commission, as well. Sales experience is a plus but not needed. All you need is a NYS driver's license!

Job Description Job Summary: We are seeking a skilled and dedicated Used Car Service Technician to join our 2nd shift automotive service team. The 2nd shift lasts from 3pm - 11pm. The ideal candidate will have a strong background in diagnosing, repairing, and maintaining vehicles, with a focus on used car inventory. You will be responsible for conducting thorough inspections, performing necessary repairs and maintenance, and ensuring the overall quality and reliability of our used cars. Key Responsibilities: • Inspect, diagnose, and repair mechanical and electrical issues on used vehicles., • Perform routine maintenance services, including oil changes, brake inspections, tire rotations, and fluid replacements., • Identify and report any safety or performance issues to the Service Manager., • Conduct comprehensive vehicle inspections, including engine diagnostics, transmission checks, and brake systems., • Test drive vehicles to ensure proper functioning after repairs or maintenance., • Maintain and update detailed service records for each vehicle worked on., • Work closely with the service team to manage repair schedules and parts inventory., • Ensure that all repairs meet manufacturer standards and safety regulations., • Communicate effectively with customers regarding service recommendations and repairs., • High school diploma or equivalent., • Certification from an accredited automotive repair program (e.g., ASE certification) is preferred., • Proven experience as a mechanic or technician, with experience in used car service being highly desirable., • Strong knowledge of automotive systems, diagnostics, and repair procedures., • Ability to use diagnostic tools and equipment., • NYS Inspector’s License, • Valid NYS Driver’s License and clean driving record, • Strong problem-solving skills and attention to detail, • Ability to work independently as well as part of a team, • Ability to lift heavy objects (up to 50 lbs.)., • Ability to stand, kneel, and bend for extended periods., • Comfortable working in a garage or workshop environment with exposure to automotive fluids and chemicals.

Job Description Hazen and Sawyer is seeking a Construction Inspector to support the construction of water and wastewater treatment facilities and infrastructure located in the greater NYC Metro area and Springfield, MA. The selected candidate will inform the CM team by observing and reporting on construction activities, effectively coordinating and collaborating with the project team members, and providing documentation and inspection activities for various water and wastewater facilities and infrastructure. Responsibilities include: • Review and interpret project drawings, specifications and work plans to verify contractor compliance;, • Conduct on-site observation, monitoring, inspection, and evaluation of construction activities;, • Verify and track work in accordance with approved shop drawing submittals;, • Observe contractor performance and compliance with safety requirements;, • Prepare daily reports, verify material quantities, Time and Material (T&M) records and review contractor pay applications;, • Monitor construction contractor’s adherence to project schedule and sequence of activities related to daily field observations;, • Maintain project redline and as-built drawings;, • Coordinate and communicate effectively with the CM Project team, multi-discipline engineering teams, contractors and third-party inspection/testing firms;, • Assist and coordinate with project start-up, testing checkout and training activities;, • Minimum 5 years of construction / construction observation experience;, • Familiarity with construction methods typical of civil, structural, mechanical and/or electrical engineering work;, • Excellent verbal, written, and interpersonal skills, organizational and problem-solving skills;, • Experience working on and collaborating with multidisciplinary teams, • Willing to travel and stay local to projects in the NYC Metro area as needed., • Proficiency with Microsoft Office Suite, Microsoft Project and related PC software packages used on construction projects, • Experience in municipal water and wastewater or similar industry construction inspection preferred

Job DescriptionDescription: What do we do – and why? Since 1998, Mann Wireless has applied innovative approaches and extensive knowledge to stay ahead of the curve with everything RF. Our job is to work together with contractors, building owners, local municipalities, and major cellphone carriers across the United States to ensure cellphones and first responder radios work in-buildings. We are proud of the work we do, and we are proud of the positive impact we make on the safety and connectivity of others. Who are we looking for? • Eager & Quick Learners – The RF world and the work we do is considered a “specialty” in the Engineering and Construction community. Mann Wireless is looking for individuals who want to learn about RF technology and the skills required to deliver successful RF projects. We will provide the technical training – you will provide the willingness to learn and the ability to apply that knowledge., • Good initiative – at Mann Wireless, we believe in a team environment, where everyone pitches in. If we see something that needs to be done, we do it., • Great interpersonal skills – we need someone with strong communication skills to closely partner with customers, subcontractors, and of course, our team., • Travel (up to 3 to 5 days per week) around the Northeast, mostly focused in New York, New Jersey, and Massachusetts, • Installation of coaxial cable and terminations, • Installation of fiber cables, splicing, and terminations, • Perform a variety of testing, including radio and cellular RF surveys, cable testing (sweep, PIM), OTDR fiber testing, etc., • Troubleshooting systems and electronics as needed, • Complete job-related documentation, • Keep team, customer, other stakeholders informed of job progress, • Paid Time Off (vacation, holidays, medical), • 401k plan with 3% company match, • Health, vision, and dental insurance, • Life insurance, long- and short-term disability insurance, • High School Diploma/Equivalent, • Comfortable using hand/power tools, working from ladders, being on the move all day, • Travel (3 to 5 days per week) to project locations primarily in NY, NJ, and MA, • Valid driver license with clear driving record and reliable transportation, • Associate’s or Bachelor’s degree in Engineering, Electrical, or Technology field, • Related military experience, • Low voltage experience, • Cellular/DAS construction experience, • OSHA 10 or 30 certification Learn more at

Job Description Job Posting: Maintenance Person This job posting contains some general information about what it is like to work in this restaurant, but is not a complete description of all duties of the job. People who work in this restaurant perform a number of different tasks every day and this posting does not list every essential function of the job. DUTIES & RESPONSIBILITIES: -Filtering oil fryers daily -Maintaining outside grounds -Cleaning equipment, inside and outside windows, stock rooms and restrooms -Unloading delivery truck two - three times a week -Taking out and emptying trash compactor -Changing light bulbs -Cleaning HVAC/Exhaust units and roof of debris The Maintenance Person assists management in achieving and maintaining outstanding interior and exterior restaurant cleanliness and maintaining restaurant equipment. As a member of the Maintenance Team, your restaurant will support you with the tools and training needed to succeed. QUALIFICATIONS: -Have a positive attitude -Ability to work well in a fast-paced environment -Work as a member of a team -Manage Time effectively -Must be 18 years of Age -Experience performing routine maintenance. -Strong organizational and follow up skills. PHYSICAL REQUIREMENTS: This position can be physically demanding. The employee may be required to stand for extended periods of time, lift objects up to 30 lbs on a regular basis. BENEFITS: -Paid Time Off -Employee Discount -Medical, dental and vision coverage -Short and Long Term Disability, Life, and additional supplemental insurance options -Education through Archways to Opportunity including opportunities to earn a High School degree, college tuition assistance and English classes as a second language. This job posting is for a position in a restaurant owned and operated by an independent franchisee, not McDonald’s USA. This franchisee owns a license to use McDonald’s logos and food products, for example, when running the restaurant. However, this franchisee is a separate company and a separate employer from McDonald’s USA. Thus, if you are hired for the job described in this posting, the franchisee will be your employer, not McDonald’s USA. Only the franchisee is responsible for employment matters at the restaurant, including hiring, firing, discipline, supervisions, staffing, and scheduling employees. McDonald’s USA has no control over employment matters at the restaurant. McDonald’s USA will not receive a copy of your employment application and it will have no involvement in any employment decisions, including whether you receive an interview for the job or whether you are hired.

Job DescriptionCompany Description Monro, Inc. is one of the nation’s largest auto service companies and major tire retailer. We own and operate more than 1,200 stores in 32 states and our stock trades on the Nasdaq (MNRO). The Monro family of brands includes some the most recognizable names in the industry—Monro Auto Service and Tire Centers, Mr. Tire, Tire Choice, amongst many more regional chains. Our dominance is driven by teammates who strive to provide a five-star experience and deliver consistent value to our guests and shareholders. At Monro, we understand that a 5-star guest experience begins with a 5-star teammate experience. In fact, we’re currently investing more than $100 million in store improvements, new technology, and career development through our own Monro University training platform. Destination Monro – Your Career is Here! Do you have what it takes to shape a better future for yourself and the automotive service industry? Our vision is to be America’s leading auto and tire centers, trusted by consumers as the best place in our neighborhoods for quality automotive maintenance and repairs. We’re looking for motivated individuals at every stage in their career who share our vision. Positions are available in our retail locations across our many brands, in field management, and in store operations at our Store Support Center in Rochester, New York. If you like helping others, as much as you like working on cars; if you enjoy being part of a team, solving problems, and building guest relationships; if you value honesty and integrity - we have a Destination for you at Monro. Contact us to learn more. Destination Monro! – Your career is here. Job Description About the Role: The Technician role is full time or part-time and is an hourly position based on needs of the business. The Technician is primarily responsible for conducting basic vehicle diagnostics and performing routine vehicle repair and maintenance services in accordance with company standards and manufacturer specifications. This position is expected to deliver exceptional 5 Star service to our guests, through effective communication of vehicle issues and proposed solutions, as well as consistently meeting guest expectations for time commitments and quality. Salary Range: Up to $35.00 per hour - Based on experience. This role is eligible for additional compensation and incentives. Responsibilities: • Perform basic vehicle diagnostics to properly identify required repairs., • Consistently complete Monro’s Courtesy Inspection process, on every guest vehicle, identifying, documenting, and communicating additional needed services and repairs; Audit courtesy inspections performed by the General Service Technicians, • Assist in inventory management to include pulling tires and parts, unloading and stocking inventory., • Assist with all general store duties, ensuring the store is in excellent condition and maintained to Monro standards for cleanliness and consistently in guest ready condition., • Consistently perform service(s) in accordance with Monro’s safety standards including but not limited to Monro’s Wheel Torque, Oil safety and compliance procedures, • Test drive vehicles in accordance with Monro’s Road Test policy, including consistently utilizing our dedicated test drive routes, while maintaining all local traffic and safety laws, • Understand and adhere to company policies and procedures, Governmental standards including environmental codes and ANSI/OSHA standards. Consistent use of all required safety standards set forth in training and policies and procedures., • Maintain technical knowledge and capabilities to ensure proficiency through the timely completion of all required Monro University training courses and modules., • Operate, utilize, and maintain all equipment in a safe manner in accordance with Monro and equipment manufacturer guidelines including but not limited to lifts, welders, brake lathes, etc., • Perform other duties as assigned and required. Qualifications Qualifications: • High School Diploma or equivalent., • Automotive training including basic car maintenance and repair or the equivalent combination of education and experience., • ASE certification and State Inspection license (where applicable) preferred., • Must possess a current valid driver’s license and have a satisfactory Motor Vehicle Report (MVR) and have the ability to operate customer’s vehicles to conduct test drives., • Capable of performing basic automotive maintenance, repair, and tire services, • Ability to diagnose problems identifying root cause and determine appropriate repair solution., • Ability to interpret and execute instructions furnished in written, oral, and diagram formats, • Strong customer service skills This job operates in an automotive shop environment. The job will have exposure to a moderate noise level, adverse weather conditions, chemicals, odors, dirt, and dust. Technicians must be able to complete the following but not limited to: • Ability to work flexible hours, days, evenings, weekends, and holidays., • Must be able to see, hear, lift, carry and stock merchandise and supplies up to 50 lbs. without assistance., • Frequent standing and walking for long periods of time., • Frequent reaching overhead and below the knees, including squatting, bending, stooping, kneeling, twisting. Additional Information Benefits • Performance based incentives, • Paid vacation and holidays, • Reimbursement for ASE Certifications, • Reimbursement for State Inspection Licenses, where applicable, • 401k eligibility immediately upon hire, • Direct Deposit, • Employee Discounts, • Healthcare, Vision, and Dental, • Employee Access Perks Monro Inc. is proud to be an Equal Employment Opportunity / Affirmative Action employer. It is our policy to consider for employment all individuals regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, gender, sex, sexual orientation, gender identity and/or expression, genetic information, veteran status, or any other characteristic protected by federal, state, or local law. Your next Destination! Growth Opportunity: At Monro we’re committed to helping our teammates grow their career through the combination of coursework, demonstrating leadership skills and open opportunities. Our teammates receive on-the-job training, company sponsored certifications, as well as course curriculum in Monro University that empowers them to advance to the next level of their careers. Monro, Inc. is an equal opportunity employer and affords equal opportunity to all applicants for all positions without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Job Description Adirondack Tire & Mavis Tire - AUTOMOTIVE TIRE TECHNICIANS ($800 New Hire Bonus) Adirondack Tire & Service is proud to join the Mavis Tire Family. We're looking for full-time Automotive Tire Technicians to join Team Mavis TODAY at our state-of-the-art automotive service and retail tire sales centers in the Saratoga Springs, NY area. With Over 2,000 retail locations, Mavis is one of the largest tire sales and automotive repair chains in the United States. Mavis offers eligible Automotive Tire Technicians GUARANTEED WEEKLY BONUS PAYMENTS during the introductory period of employment, totaling up to $800! WHAT IS THIS GREAT CAREER OPPORTUNITY? As an Automotive Tire Technician, you're the backbone of our business. That's why you'll realize the rewards of a career with competitive, guaranteed base compensation PLUS additional earning potential through significant weekly bonus payments. The starting base rate of pay for an Automotive Tire Technician is negotiable. • NO EXPERIENCE IS NEEDED! We'll teach you everything you need to know through PAID TRAINING. To help introduce you to our weekly performance-based incentive programs and to give us an opportunity to coach you on our industry-leading processes, Mavis offers eligible Automotive Tire Technicians GUARANTEED WEEKLY BONUS PAYMENTS during the introductory period of employment, totaling up to $800!, • Automotive Tire Technicians install new tires and wheels and perform tire services -- like rotations, balancing and flat repairs -- to keep our valued customers' vehicles operating safely. HOW DO I KNOW IF A CAREER WITH MAVIS IS RIGHT FOR ME? You'd be a great fit for the Automotive Tire Technician position if you: • like paid training and using proven processes;, • are motivated by commissions/incentive compensation;, • value reliability, punctuality and teamwork;, • love working in a fast-paced environment;, • enjoy staying active;, • are open to learning;, • care about meeting customer-promised delivery times and providing quality service;, • want to work for a growing company that promotes from within; and,, • be at least 18 years of age;, • be legally authorized to work in the United States; and, At Mavis, we understand that our people are our greatest asset. We value our team members' hard work and that's why proudly offer you benefits and rewards to support your lifestyle and well-being. As an Automotive Tire Technician, you can expect: • A safe, positive working environment;, • An excellent combination of fringe benefits, like health, vision and dental insurance;, • A 401(k) retirement savings plan with employer match;, • Paid vacations;, • Paid time off;, • Paid holidays;, • Life insurance;, • Paid on-the-job training; and,, • Opportunities for career growth and advancement What are you waiting for? APPLY NOW! Candidates can apply online at . OPEN INTERVIEWS ARE AVAILABLE 7 DAYS A WEEK! Simply walk in during store hours for an immediate interview. If you have any additional questions, you may call the Recruitment department toll-free # at 844-375-3995. For more information about Mavis, please visit . Mavis is an Equal Opportunity Employer Consistent with our commitment to the principle of equal employment opportunity for all individuals, we enforce a zero-tolerance policy on discrimination at Mavis. Employment decisions are made without regard to an applicant's or employee's actual or perceived race, color, religion, creed, sex, pregnancy, sexual orientation, national origin, age, ancestry, ethnicity, disability, citizenship, alienage, marital status, domestic or civil union partnership status, familial status, caregiver status, military or veteran status, transgender status, gender identity or expression, genetic information, predisposing genetic characteristic, status as a victim of domestic violence, stalking and sex offenses, or any other status protected by applicable federal, state or local laws, regulations or ordinances. Exceptions or modifications to certain job duties and/or expected schedules may be provided for an employee who needs a reasonable accommodation for: (a) a sincerely held religious belief, observance or practice that conflicts with the expected schedule for a position; or (b) an otherwise qualified individual with a disability, unless such accommodation poses an undue hardship on our business, in accordance with applicable federal, state and local laws. Additional information is available by contacting . We will endeavor to make a reasonable accommodation / modification to the known physical or mental limitations of a qualified applicant with a disability to assist in the hiring process, unless the accommodation would impose an undue hardship on the operations of our business, in accordance with applicable federal, state and local laws. If you believe you require such assistance to complete this Application for Employment or to participate in the interview process, please contact our Employee Experience team at (914) 984-2500 ext. 5631. We also will endeavor to provide reasonable accommodation for a job applicant's or an employee's sincerely held religious beliefs, observances, or practices that conflict with a work requirement unless the accommodation poses an undue hardship to our business, in accordance with applicable federal, state and local laws. If you believe you require such an accommodation, please contact our Employee Experience team at (914) 984-2500 ext. 5631. In addition, applicants may report any instances of perceived discrimination through HRConnect either by calling toll-free at 1-877-628-4755 or by sending an email to . Job Posted by ApplicantPro

Job Description WGNSTAR is a dynamic and growing company with a global footprint. Primarily focused on the semiconductor industry, we provide a platform for you to expand your career with knowledge gained on the job training, and tailored development. We know we need talented people like you that hold similar values, which is why we do not put limits on learning, development, industry, and personal growth. Start your path to a WGNSTAR career today! Though this position is not currently open, we do anticipate hiring for this role in the near future. If you're interested in future opportunities with WGNSTAR, we encourage you to submit your application today. A member of our Talent Acquisition team will reach out if your qualifications align with the requirements of the position. Title: Maintenance Technician Level 1 Schedule: 12-hour Compressed Work Week. 4 Days on 3 Days Off, Rotating, Days or Nights (see below) Pay Rate: $18.00 Hourly + Overtime + 10% Shift premiums for night shift 90 - Day Sign on Bonus - $500 Location: Malta, NY Position Type: Full Time Benefits: This position is eligible for WGNSTAR’s full benefits package, including Medical, Dental, Vision, and 401(k). Additional benefits are listed at the end of this posting. Schedule: Compressed Work Week A Shift: Sunday, Monday, Tuesday, every other Wednesday off. 6:00am - 6:30pm B Shift: Sunday, Monday, Tuesday, every other Saturday off. 6:00pm - 6:30am C Shift: Thursday, Friday, Saturday, every other Wednesday off. 6:00am - 6:30pm D Shift: Wednesday, Thursday, Friday, every other Saturday off. 6:00pm - 6:30am Principal Duties and Responsibilities: • You will join a team to perform daily preventative maintenance tasks in a semiconductor cleanroom environment while wearing a cleanroom suit and other PPE., • You will be required to adhere to strict facility standard operating procedures with a focus on safety, quality, and effective team communication., • Your success will contribute to the facility’s overall throughput while simultaneously developing your own skills in a coveted and highly technical industry. Requirements:, • High School Diploma /GED, • Able to wear a full Cleanroom Suit and/or necessary Personal Protective Equipment., • Excellent timekeeping. Additional Benefits: Paid Vacation, Select Holidays, Overtime Opportunities, On-site Facilities & Career Development Opportunities. The people who thrive most at WGNSTAR are those individuals who perform well in a team environment, enjoy interacting and engaging with several different stakeholders, and adapt quickly to changing environments, while leveraging their skills, quality, and knowledge to drive themselves and their teams towards continuous improvement and success. This job description is intended to convey information essential to understanding the scope of the job and the general nature and level of work performed by job holders within this job. This job description is not intended to be an exhaustive list of qualifications, skills, efforts, duties, responsibilities or working conditions associated with the position. This position is not eligible for visa sponsorship. All applicants must be legally authorized to work in the United States without the need for current or future sponsorship (e.g., H-1B, O-1, etc). Additionally, WGNSTAR does not participate in the STEM OPT extension program for this role. Equal opportunities and Social Governance WGNSTAR is an Equal Opportunity Employer, drug free workplace, and complies with ADA regulations as applicable. WGNSTAR places an immense emphasis on equal employment, encourages diversity in the workplace, and applies an open-door policy for inclusion of all employees. Our diversity program encourages people from any gender, background, ethnicity, culture, education, and experience to join the company and more importantly build a career through employee development. Through our Global wellness programs, WGNSTAR ensures our employees and families have access to a full range of wellness services through our Employee Assistance Program (EAP). In the communities that surround our business operations, we support individual and group sponsorships for local sports and those that are vulnerable in society. Powered by JazzHR SuDq4Ajt07

Job Description We are seeking an experienced full-time Remedial System Technician for our Remedial Construction group. Duties • Operation and maintenance of a variety of soil and groundwater remediation systems, including, but not limited to, soil vapor extraction, air sparge, hi vacuum/dual phase extraction, oxygen injection and product recovery., • 5+ years of relevant experience, • Strong mechanical aptitude and ability to troubleshoot pumps and electronic controls, • Valid NYS Driver License, • 40 Hour HAZWOPER certification, • Experience with NYSDEC standby contracts a plus, • Ability to operate heavy equipment a plus Salary Range: $22 - $30 per hour The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job DescriptionDescription: What do we do – and why? Since 1998, Mann Wireless has applied innovative approaches and extensive knowledge to stay ahead of the curve with everything RF. Our job is to work together with contractors, building owners, local municipalities, and major cellphone carriers across the United States to ensure cellphones and first responder radios work in-buildings. We are proud of the work we do, and we are proud of the positive impact we make on the safety and connectivity of others. Who are we looking for? • Eager & Quick Learners – The RF world and the work we do is considered a “specialty” in the Engineering and Construction community. Mann Wireless is looking for individuals who want to learn about RF technology and the skills required to deliver successful RF projects. We will provide the technical training – you will provide the willingness to learn and the ability to apply that knowledge., • Good initiative – at Mann Wireless, we believe in a team environment, where everyone pitches in. If we see something that needs to be done, we do it., • Great interpersonal skills – we need someone with strong communication skills to closely partner with customers, subcontractors, and of course, our team., • Travel (up to 3 to 5 days per week) around the Northeast, mostly focused in New York, New Jersey, and Massachusetts, • Installation of coaxial cable and terminations, • Installation of fiber cables, splicing, and terminations, • Perform a variety of testing, including radio and cellular RF surveys, cable testing (sweep, PIM), OTDR fiber testing, etc., • Troubleshooting systems and electronics as needed, • Complete job-related documentation, • Keep team, customer, other stakeholders informed of job progress, • Paid Time Off (vacation, holidays, medical), • 401k plan with 3% company match, • Health, vision, and dental insurance, • Life insurance, long- and short-term disability insurance, • Working with a team that wants to see you grow and thrive at our company!Requirements: Minimum Requirements • High School Diploma/Equivalent, • Comfortable using hand/power tools, working from ladders, being on the move all day, • Travel (3 to 5 days per week) to project locations primarily in NY, NJ, and MA, • Valid driver license with clear driving record and reliable transportation, • Associate’s or Bachelor’s degree in Engineering, Electrical, or Technology field, • Related military experience, • Low voltage experience, • Cellular/DAS construction experience, • OSHA 10 or 30 certification, • Experience with Microsoft Outlook, Word, Excel Mann Wireless is an Equal Opportunity Employer/Affirmative Action employer. Mann Wireless provides equal opportunity to all employees on the basis of individual qualification without regard to race, sex, religion, color, age, national origin, physical and mental disability, genetic information and history, sexual orientation, or other category protected by state or federal law. Mann Wireless does not discriminate in the recruitment, hiring, compensation, promotion, transfer, benefits, or any other condition of employment. Learn more at

Job DescriptionSalary: $27-30/HR cb20 is a technology solutions provider of choice for organizations that value IT and Managed Services expertise and category-leading customer service. We partner with the worlds leading hardware and software companies to deliver end-to-end consulting, implementation and managed services across the U.S. With world-class engineering talent and 30+ years of experience cb20 delivers confidence, security, a true sense of control and the highest- quality, end-to-end customer experience in the business. AV Low-Voltage Technician You will specialize in the installation, testing, labeling and troubleshooting of Audio Visual Systems under the direction of our AV Field Engineer. A fundamental understanding of audio-visual principles, functionality, and terminology is required to be successful. Responsibilities and Duties: • Pulling Low Voltage Cable (Cat 5, 5e, 6, 6a, Speaker Wire, HDMI, etc.), • Ability to perform Field Terminations (RJ45, DB9, XLR, 3.5 mini, etc.), • Capable of receiving site deliveries and staging the project material for installation., • Able to install the following: Displays, Mounts, Equipment Racks, Ceiling Mounted Projectors, Projection Screens, In-Ceiling Speakers and Microphones, Pendant Speakers and Microphones, Wall Panels ,Table Cubbies, In Table Microphones and more., • Adept at reviewing floor plans, line diagrams and rack elevations to ensure successful installation., • Submitting Daily Reports to the office to outline project status and work performed., • Technical Understanding Able to understand technology and work closely with the field engineers who are responsible for programming and commissioning., • Interface with customers on each job site representing cb20 with respect and integrity., • Leave each job site clean and organized at the end of each day and spot checked at the completion of each project. Required Skills: • At least 5 years of experience in AV Installation, troubleshooting and Service., • Experience with Microsoft Teams, Zoom, and WebEx as Conferencing Platforms, • Experience with AV industry software platforms, • Organized, proactive and good communication skills., • Ability to lift over 50 lbs., • Capable of bending, lifting, crouching, and leaning over for long periods of time., • Clean driving record, • The ability and willingness to travel (including a weekend departure, traveling during off-hours, and frequent overnight stays)

Job Description Large Magnetics Assembly Technician: Come join us at Espey, where we're shaping the future. As industry leaders in manufacturing high-quality power conversion solutions, we specialize in serving mission-critical military and rugged industrial sectors for use in the most harsh & severe environments. With over 90 years of experience, Espey is synonymous with innovation and reliability, providing essential power supplies and transformers that ensure the safety of our military personnel. As a publicly traded company on the NYSE (ESP), we're committed to excellence across all facets of our operation, from design and development to testing and manufacturing. Located in the vibrant city of Saratoga Springs, NY, just 30 minutes from the state capital and within easy reach of major metropolitan centers like New York City, Boston, and Montreal, Espey offers a unique opportunity to be part of something extraordinary. If you're ready to shape the future and embark on a fulfilling career adventure, join us at Espey. Let's build together! About the job: Embark on a new career journey to shape the future as a Large Magnetics Assembler Technician, where you will be part of a team crafting transformers destined for military and industrial products. The Large Magnetics Assembler connects components to assemble transformers and other various fabricated items, as specified by work orders, diagrams, work instructions, or customer layouts. Unlock your operational skills and production finesse by creating products that protect today’s military. Large Magnetics Assembler Key Responsibilities including, but not limited to: • Build transformers and assemblies using drawings, work instructions, and other documentation., • Prepare and assemble wire connections using crimping, tinning, insulating, and other techniques., • Assemble components, subassemblies, or systems using hand and power tools (manual, electric, or pneumatic)., • Set up and build magnetic cores, steel laminations, and wound coils using stacking, banding, and interleaving methods., • Perform disassembly and rework/repair as needed., • Solder, braze, or epoxy components using soldering irons, torches, and appropriate tools., • Use fixtures, jigs, and calibrated measuring tools to ensure assembly accuracy and quality., • Clean and prep work surfaces for soldering, brazing, or applying adhesives., • Hermetically seal units using solder or braze techniques., • Collaborate with engineering and quality teams to support product improvements and compliance., • Enter data into ERP systems and complete documentation accurately., • Identify and report quality, safety, or equipment concerns to supervisors., • Follow SOPs, safety regulations, and quality standards., • Maintain a clean, organized work area and assist in general housekeeping tasks., • Participate in training and continuous improvement efforts., • Support team goals through effective communication and cooperation. Required Qualifications: • High School Diploma or GED equivalent, • Must be 18 years or older, • Must be able to work full time, • While performing the functions of this job, the employee is frequently required to sit, use hands to finger, handle or feel, and lift up to 50 pounds. The employee is occasionally required to stand, walk, reach with hands and arms, stoop, kneel crawl, talk or hear, and lift up to 100 pounds, • Previous experience in a manufacturing or industrial environments, • Previous experience with assembly or fabrication work prescribed by drawings, sketches, work instructions, • Basic mathematic skills including, but not limited to, addition, subtraction, multiplication, division, and determining ratios, • Ability to use measuring tools including a tape measure, caliper, torque wrench & height gage, • Previous technical training or relevant certifications, • Basic mechanical aptitude and willingness to learn new skills, • Ability to follow work instructions and work effectively in a team environment, • Attention to detail and commitment to quality, safety, and site and product security, • Good communication skills and ability to interact professionally with coworkers and supervisors, • Ability to lift and move heavy objects as needed, • Pay Rate $18.79 – $20.21 per hour, • Four –day work week, • Medical, Dental, Vision, & Life insurance with Employee assistance program, • Flexible spending account & Health savings account Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and expectations. Must be US Citizen Job Type: Full-time Pay: $18.79 - 20.21 per hour Benefits: • Dental insurance, • Employee assistance program, • Flexible spending account, • Health insurance, • Life insurance, • Paid time off, • Tuition reimbursement

Job Description Small Magnetics Assembler Technician Come join us at Espey, where we're shaping the future. As industry leaders in manufacturing high-quality power conversion solutions, we specialize in serving mission-critical military and rugged industrial sectors for use in the most harsh & severe environments. With over 90 years of experience, Espey is synonymous with innovation and reliability, providing essential power supplies and transformers that ensure the safety of our military personnel. As a publicly traded company on the NYSE (ESP), we're committed to excellence across all facets of our operation, from design and development to testing and manufacturing. Located in the vibrant city of Saratoga Springs, NY, just 30 minutes from the state capital and within easy reach of major metropolitan centers like New York City, Boston, and Montreal, Espey offers a unique opportunity to be part of something extraordinary. If you're ready to shape the future and embark on a fulfilling career adventure, join us at Espey. Let's build together! About the job: Embark on a new career journey to shape the future as a Small Magnetics Assembler Technician, where you will be part of a team crafting transformers destined for military and industrial products. The Small Magnetics Assembler connects components to assemble transformers and other various fabricated items, as specified by work orders, diagrams, work instructions, or customer layouts. Unlock your operational skills and production finesse by creating products that protect today’s military. Key Responsibilities – Small Magnetics Assembler: • Wind coils for military and commercial use by following wiring diagrams, work orders, and specifications, • Determine wire type, size, and finished dimensions based on job documentation, • Set up coil-winding machines and adjust wire tension, counters, and forming tools as needed, • Monitor winding process to ensure proper shape, turns, and consistency, • Strip, bend, shape, and tin leads; solder wires to terminals and apply insulation sleeves, • Finalize and clean completed coils before moving to the next production stage, • Accurately complete documentation and input data into ERP system, • Work with engineering to support quality, product improvement, and compliance, • Report quality issues, equipment malfunctions, or safety concerns promptly, • Follow all SOPs, safety regulations, and quality standards, • Maintain a clean, organized workspace and participate in continuous improvement initiatives · High School Diploma or GED equivalent · Must be 18 years or older · Must be able to work full time · While performing the functions of this job, the employee is frequently required to sit for long periods of time, have use of hands to finger with dexterity, handle or feel, reach with hands and arms, and lift up to 25 pounds. The employee is occasionally required to stand, walk, stoop, kneel, crouch or crawl, talk or hear, and lift up to 50 pounds. Close vision, ability to adjust focus, and color vision are all required for this position. · Must be US citizen with ability to secure a US Government security clearance; Applicants must meet eligibility requirements for access to export controlled data. Preferred Qualifications: • Manufacturing or assembly experience using drawings, sketches, or work instructions, • Basic mechanical aptitude and ability to follow written and verbal directions, • Strong communication skills; able to read, write, and present information clearly, • Proficient in basic math, including fractions, decimals, percentages, and interpreting simple graphs, • Problem-solving skills and ability to work with minimal variables in structured situations, • Team-oriented, detail-focused, and committed to quality and safety, • Physically capable of lifting/moving heavy objects, • Flexible with work hours and available for overtime as needed Perks at Espey: · Pay Rate $ 17.52 - $18.83 per hour · IBEW Union Pension Plan · Four –day work week · Medical, Dental, Vision, & Life insurance with Employee assistance program · Flexible spending account & Health savings account · Tuition reimbursement for qualified curriculum An Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and expectations. Job Type: Full-time Pay: $17.52 - $18.83 per hour Benefits: • 401(k), • Dental insurance, • Employee assistance program, • Health insurance, • Life insurance, • Paid time off, • Vision insurance Schedule: • 10 hour shift People with a criminal record are encouraged to apply Ability to Commute: • Saratoga Springs, NY 12866 (Required) Ability to Relocate: • Saratoga Springs, NY 12866: Relocate before starting work (Preferred) Work Location: In person

Job DescriptionSalary: $35/HR cb20 is a technology solutions provider of choice for organizations that value IT and Managed Services expertise and category-leading customer service. We partner with the worlds leading hardware and software companies to deliver end-to-end consulting, implementation and managed services across the U.S. With world-class engineering talent and 30+ years of experience cb20 delivers confidence, security, a true sense of control and the highest- quality, end-to-end customer experience in the business. AV Field Service Technician - NY The cb20 Field Service Technician will work in partnership with the AV Practice team and Support desk to provide Service support for customers at on-site locations with the end goals of restoring functionality, and/or resolving related technology outages to our customers assets while delivering an experience above. Responsibilities and Duties: • Read and interpret electronic schematics and architectural blueprints, • Perform preventative maintenance visits to help maintain a stable client-based system, • Clean various AV equipment including but not limited to: camera lenses, monitors and equipment fans, • Take responsibility to accurately complete job documentation as needed, • Field installation of control programs (Crestron/Firmware) upload and download capability, • Field service support of networked devices (Routers, IP Protocols, etc.), • Perform service tasks in a timely and quality conscious manner including but not limited to: pulling cable, installing connectors, mounting projectors and hanging ceiling mounts, • Provide necessary training and support for next level service technicians, • Provide end-user client training as needed, • Adhere to and understand OSHA standards for all phases of the job, • Setup and troubleshoot various video codecs/video teleconferencing systems, • Travel to various job sites required, • Other duties assigned as needed Required Skills: • Effectively communicate with employees, customers and colleagues, • Ability to use hand and power tools in a safe and efficient manner, • Ability to work and think independently and ensuring to meet deadlines, • Basic computer knowledge, • Knowledge of basic signal flow for audio, video and control, • Ability to manage small to medium projects, • Ability to solder & crimp connectors, • Valid Drivers License and a Motor Vehicle Record that meets cb20 driving standards Required Certifications: • Minimum of 3 years of audiovisual integration experience, • Formal education in technology or related field preferred, • Minimum of a High School Diploma or equivalent preferred, • Preferred external training:, • OSHA 10-Hour, • Avixa (InfoComm) CTS, • Crestron Programming Experience, • Exton AV Associate Certification, • Experience with Biamp, Shure, Crestron, and other various DSP manufacturers, • Experience with various UC integration platforms (Zoom/Teams/WebEx), • Experience troubleshooting and configuring web calling peripherals such as Neat, Logitech, BYOD systems, etc.

Job Description Job title Level 2 Technician Reports to Resource Manager Who we are ML Renewable Services LLC takes great pride in being one of the largest and most experienced crane businesses in North America. Our companies and branch locations are strategically positioned across the Rocky Mountain region, Southwest, Midwest, and East Coast of the United States where our knowledgeable team of professionals provide full-service solutions for their customers’ toughest challenges. Simply put: We know the crane business! Our values include Show up Hungry, don’t accept average, Think independently, and Lift as one. Job purpose The Level 2 technician is a critical and active role to maintain optimal function and output at the wind site by working daily on turbine operations, required maintenance, safety, quality control and warranty repair(s). You will partner and communicate with the Field Supervisor and Lead technician to execute contract requirements and timelines and ensure alignment with operational excellence Duties and responsibilities • Perform assembly, testing, repair, and maintenance on wind turbine generators and related equipment., • Perform mechanical, electrical, and hydraulic component maintenance and repair., • Perform component retrofits and upgrades., • Perform preventive maintenance, daily operations, & large component replacement., • Complete required and accurate documentation associated with corrective and preventive maintenance of wind turbines and associated equipment; maintain records of documentation., • Troubleshoot, adjust, repair, and/or retrofit low to medium voltage electrical, mechanical, or hydraulic components and equipment., • Capable of performing site specific LOTO procedures., • Utilize appropriate safety gear, protective equipment, and control or dissipation of energy sources to ensure work is performed in a safe manner., • Properly maintain tools and equipment used to perform assigned maintenance/installation assignments., • Maintain required training certifications and qualifications to enable personnel to safely perform work-related tasks in a quality & safe manner., • Supervise and provide guidance as needed to other technicians., • Other responsibilities as assigned. Qualifications Qualifications include: • Experience using basic power tools., • Valid driver's license., • Basic wind technician certificates. (GWO BST, BTT, Confined Space Awareness, NFPA70E, Rigging and Signaling, OSHA 10), • Required certifications must be valid throughout the entirety of the project., • High school diploma or equivalent, • One to three years of experience in the wind industry., • Willingness to learn and the ability to be coached., • Ability to make decisions and act when time or customer pressures are apparent. The employee may be required to wear appropriate PPE equipment. The employee could occasionally be exposed to extreme temperatures, fumes, or airborne particles. The noise level in the workplace is moderate. Physical requirements • Ability to lift 50 lbs., • Ability to climb up to 375 ft., • Does not exceed 300lbs with full climbing equipment., • Work Remotely 80% of the time minimum. The Americans with Disabilities Act (ADA) requires employers to identify essential functions of a role. As a result, this job requires the employee to climb, stand, and lift and/or move up to 75 pounds. Reasonable accommodations may be made to enable individuals with disabilities to perform the tasks. Direct reports N/A EEO Statement ML Renewable Services LLC provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description Advance your career with the Stark Tech team. We'll shape your future together! Stark Tech is a total optimization provider of facilities and energy solutions. Stark Tech leads the market in providing cutting-edge facilities and energy solutions. We integrate systems, offer energy-efficient equipment and support services, and provide building analytics to help customers meet sustainability goals. Our large-scale equipment converts waste to renewable natural gas, reducing greenhouse gas emissions. Additionally, we enhance the utility grid with microgrid and battery energy storage solutions, along with solar development consulting services. Join Stark Tech to be part of the future of energy transformation. What you can expect We believe your well-being and satisfaction are vital for a fulfilling career. We are gritty, employee, and customer focused. Here are some of the benefits we provide: • Paid Time Off & Holidays, • 401(k) with employer match, • Medical/Dental/Vision insurance, • Health Savings Account (HSA) and Flexible Spending Account (FSA), • HSA employer contribution, • Life and Disability insurance, • Wellness Program (participation incentives), • Employee Assistance Program, • Competitive pay The Service Technician is responsible for preventative maintenance, inspections, start-ups, upgrades, repairs, troubleshooting, and safe operation of applicable equipment and associated system components to meet the intent of the project/service call requirements. What are we looking for: • High School Diploma or equivalent and at least 5 years of related experience, or the equivalent combination of education (technical school) and experience., • Experience in the construction or HVAC industry required including, but not limited to boilers, burners, combustion controls, psychometrics, and clean, dry refrigeration piping systems., • Demonstrated knowledge of control theory, automatic temperature controls, building automation systems and other building subsystems., • Knowledge of HVAC&R theory, solid mechanical, electrical troubleshooting and repair skills required., • Knowledgeable in the use of VOM Meters, Refrigerant tools, torches, Brazing and soldering required., • Ability to read wiring diagrams, mechanical layouts and blueprints required., • Ability to communicate with customers and coworkers regarding inspection and service findings is required., • Must have or be able to obtain EPA CFC Certification- Universal., • Be highly motivated and an independent thinker., • Must be able to thrive in a fast pace setting and adapt/be flexible in a changing environment., • Ability to multi-task, work under pressure and meet deadlines required., • Operating knowledge of Microsoft office software and working proficiency with handheld devices, such as Smartphones, iPads, etc., • Must have current (within 5 years) or be able to obtain 10-hour OSHA certification. 30-hour OSHA is a plus., • Valid driver's license., • Participate in on-call rotation. Our fast-growing organization offers competitive pay, a positive work environment, and opportunities for career growth within the company. If you're a motivated individual with a sense of accountability, resiliency, and a dedication to providing exceptional customer service, we encourage you to get in touch with us. The advertised compensation range for this position represents what we believe, at the time of posting, to be competitive and acceptable by reviewing comprehensive market data to include industry, and roles of similar responsibility and level. Within the range, wage will be determined by several factors including candidate knowledge, job-related skills, experience, and relevant education or training. Job Posted by ApplicantPro

Job DescriptionBenefits: • 401(k) matching, • Bonus based on performance, • Company car, • Competitive salary, • Dental insurance, • Health insurance, • Paid time off, • Signing bonus We are looking for experienced service technicians who have strong values to join our one-of-a-kind team. Individuals who have the "can-do" attitude and perseverance to continue to grow our 5.0 star company's reputation as the go to company for appliance repair in the Capital Region. We believe Respect, Integrity, Professionalism and high level of competency is the only way a company will succeed. If you are looking for a company that operates this way, know that we are looking for you too! As a Mr. Appliance Service Professional, you are a key member of our team, responsible for the quality and efficient repair of home appliances. This position is right for you if you are self-motivated, have a knack for troubleshooting, and are able to manage your time. You must possess excellent communication skills to productively communicate with fellow employees and customers. Specific Responsibilities: • Accurately diagnose and repair appliances/equipment in the customer's home, • Provide cost estimates for repairs/installations and collect payment and/or payment information from customers for work performed, • Insure the efficient use of materials and keep company vehicle and equipment properly serviced, • Must have 2 years appliance or HVAC repair experience, • High school graduate or equivalent, • Valid Driver's License with clean record, • Must be at least 21 years of age, • Proficiency to navigate tablet based technology, • The ability to safely lift up to 50 pounds on a repetitive basis, and up to 90 pounds on an occasional basis without assistance. Also the physical ability to perform strenuous work under varied circumstancesWe are actively interviewing for this position - $1000 SIGN ON BONUS FOR EXPERIENCED, TRUCK READY SERVICE PROFESSIONALS. Apply today!

Job DescriptionBenefits: • Flexible schedule, • Opportunity for advancement Are you a hands-on I.T. or Telecom professional looking for something beyond the desk? AMG Tech Support is seeking skilled, driven technicians to support our growing national client base. This role goes far beyond basic helpdesk tasks one day you might be installing an operating system, the next you're drilling through walls and running structured cabling across entire buildings, or terminating a 66-block. If you're the kind of person who thrives in the field and loves the variety that comes with every job site, this opportunity is for you. Job Responsibilities • Perform a wide range of technical tasks including but not limited to:, • OS installations, hardware diagnostics, and software setup, • Structured cabling (including drilling, running, and dressing cables), • Telecom work (punch-downs, demarc extensions, etc.), • Work independently across various environments: retail, medical, restaurant, and corporate, • Maintain a high standard of professionalism with clients, • Be on call and ready to respond to service requests within your territoryPreferred Skills & Experience, • PC and printer troubleshooting experience (a strong plus), • At least 1 year of I.T. or Telecom experience, and one of the following:, • A+ Certification, • Network+ Certification, • OR 5+ years verifiable field experience in I.T./TelecomRequired Equipment & Qualifications, • Reliable personal vehicle (Public transportation not accepted), • Valid drivers license, • Must have a standard set of tools for basic I.T. and networking tasks (e.g., screwdrivers, cable testers, crimpers)., • Laptop with Ethernet port, • Smartphone with mobile hotspot, • Ability to accept job assignments based on your availability; being on-call 24/7 is a strong advantage., • Punctual, courteous, and presentableCompensation & Perks, • Paid hourly while on site, • 1099 contractor position, • Travel pay included (based on time travel; approx. 80-mile radius from home), • App-based tracking for job time and travel, • Exposure to new and exciting technologies and clients, • Opportunity to expand your skills and industry knowledgeAbout AMG Tech Support AMG is a trusted provider of I.T. and Telecom solutions to professional offices, medical facilities, restaurants, and retail operations nationwide. We specialize in structured cabling, point-of-sale configurations, and network infrastructure. Our mission is to deliver reliable, scalable, and efficient I.T. services that help our clients stay competitive and connected. Ready to take your I.T. career to the next level? Apply today and join a team that values flexibility, skill, and drive.

Job DescriptionOn-Call IT Field Technician – PC, Mac, Printer & Scanner Support

Job Description Job title Level 1 Technician Reports to Resource Manager Who we are ML Renewable Services LLC - Panorama takes great pride in being one of the largest and most experienced crane businesses in North America. Our companies and branch locations are strategically positioned across the Rocky Mountain region, Southwest, Midwest, and East Coast of the United States where our knowledgeable team of professionals provide full-service solutions for their customers’ toughest challenges. Simply put: We know the crane business! Our values include Show up Hungry, don’t accept average, Think independently, and Lift as one. Job purpose The Level 1 Technician performs basic turbine services or installation tasks. The Level 1 Technician will have 12 months or less of documented experience or training. They will partner and communicate with the Lead Technician or a senior technician to execute contract requirements and timelines and ensure alignment with operational excellence. Duties and responsibilities • Perform and complete tasks in a timely manner as agreed upon with your supervisor., • Perform mechanical, electrical, and hydraulic component maintenance and repair under supervision as needed., • Participate in toolbox talks and JSA., • Assist with preventive maintenance, daily operations, & large component replacement., • Complete required and accurate documentation associated with corrective and preventive maintenance of wind turbines and associated equipment; maintain records of documentation., • Assist with troubleshooting components and equipment., • Utilize appropriate safety gear, protective equipment, and control or dissipation of energy sources to ensure work is performed in a safe manner., • Properly maintain tools and equipment used to perform assigned maintenance/installation assignments., • Maintain required training certifications and qualifications to enable personnel to safely perform work-related tasks in a quality & safe manner., • Other responsibilities as assigned., • Adhere to all safety guidelines and utilize all PPE required. Qualifications Qualifications include: • Experience using basic power tools., • Valid driver's license., • Basic wind technician certificates. (GWO BST, BTT, Confined Space Awareness, NFPA70E, Rigging and Signaling, OSHA 10), • Required certifications must be valid throughout the entirety of the project. Education and Experience: • High school diploma or equivalent, • Some wind experience or certification from an accredited training facility., • Willingness to learn and the ability to be coached. The employee may be required to wear appropriate PPE equipment. The employee could occasionally be exposed to extreme temperatures, fumes, or airborne particles. The noise level in the workplace is moderate. Physical requirements • Ability to lift 50 lbs., • Ability to climb up to 110 meters., • Does not exceed 300lbs with full climbing equipment., • Work Remotely 80% of the time minimum. The Americans with Disabilities Act (ADA) requires employers to identify essential functions of a role. As a result, this job requires the employee to climb, stand, and lift and/or move up to 75 pounds. Reasonable accommodations may be made to enable individuals with disabilities to perform the tasks. Direct reports N/A EEO Statement ML Renewable Services LLC provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description SERVICE TECHNICIAN Matthews Buses, Inc. has an opening for a Service Technician at our Ballston Spa NY location. Come join the team here! We are seeking a motivated individual who can work independently and possess the following experience: · Valid NYS Driver’s License/CDL preferred but not required. · Minimum of 3-5 years’ experience preferred in automotive or medium truck repair. Work well with others and independently. Basic tools a must. Matthews Buses offers company paid training for Cummins, Detroit and Freightliner. Excellent pay and a full benefits package including health, dental, vision and 401k program with generous company match, 13 paid holidays, paid time off and sick time. Qualified candidates should apply to: Michelle McKernon Company DescriptionSchool Bus DistributorSchool Bus Distributor