Device management jobs in Hauppauge, New YorkCreate job alerts

Job Description For more than 60 years, Power Device Corporation (PDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This position is 100% onsite at our Bohemia, NY location. The compensation for this role is $90,000 - $120,000 annual based on experience. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary: To continue to meet our customer’s mission critical needs, PDC is seeking an Analog/Mixed Signal Design Engineer to join our dynamic, growing organization as a valued member of our team. The candidate needs experience in developing devices with active / passive signal converter & conditioning circuits and switching power control / driver circuits; designs are implemented either as a multi-chip & wire hermetically-sealed hybrids, or as SMT Circuit Card Assemblies (CCA’s). Responsibilities • Key role: Take primary technical leadership in the design and support of our Synchro / Resolver to Digital, DATEL A2D & D2A mixed signal converter product lines, and our switched-mode multi-phase Brushless DC Motor (BLDC) driver & controller product lines. This requires a deep understanding of analog / mixed signal analysis and design techniques to ensure device specifications are met with robust margin. You will guide an interdisciplinary Engineering team through the phases of product life cycle development from requirements, architecture, & detailed design, through to device verification, qualification, and manage the transition to production. Our legacy models require continuous obsolescence review and at times may need redesign to support our mil- aero customer base. Requirements • Bachelor’s degree in Electrical Engineering; Graduate Engineering degree a plus., • 3- 7 minimum years of experience, • Deep bench of Analog Circuit design experience in multiple A to D architectures (multiple pass SAR, Flash, Sigma Delta, Pipeline) and D to A (serial DACs, R2R, current steering, charge scaling). Experience should cover low noise and high dynamic range techniques, sample acquisition and hold circuits, Bandgap reference, Oscillators, Op-amps, Switched Capacitor Circuits, Active Filters, single ended & differential circuits, phase / frequency control loops and stability analysis. Comfort working both time & frequency domains a plus., • Experience in power electronics / power management (Buck/Boost, LDO, Charge Pump, Inverters using MOSFET, IGBT, SiC and GaN Power devices., • Analog / mixed signal ASIC design and verification using Cadence or Tanner tool suites., • Experience with space-level radiation tolerant / hardened design, rad lot testing, ionizing radiation, single event upset and total dose analysis regarding component selection., • Sensors, including LVDT, Synchro / Resolvers and Encoders., • Control theory and Matrix mathematics including Z domain transform for digital control; Experience with Motor control simulation, • Clark and Park transform theory, • High level understanding of thermal, electrical stress, worst case, FMEA, tolerance, aging, and design for low EMI., • Experience with CAD tools such as LT-Spice, P-Spice, OrCAD, Allegro, PADS., • Candidate must be a US Citizen, Permanent Resident or Green Card Holder due to Export control laws. Essential Duties: • Develop clear requirements and specs from marketing / customer documents., • Provide early customer interaction to guide requirements toward more realizable product., • Distill large-scale designs down to their architectural elements, and develop unique, innovative analog and digital hardware design solutions. Consider & pursue patent application for differentiators that will help secure competitive advantage., • Generate reports and present findings to the team throughout the review process. Facilitate DFM by coordinating teams of varied technical disciplines through a clearly defined design process. Co-ordinate technical reviews with other groups., • Develop creative approaches that favorably optimize complex design tradeoffs for product cost, performance, feature set, time to market, and technical risk. Anticipate potential difficulties and develop alternative plans., • Manage support and verification activities (thermal, electrical stress, worst-case, FMEA, tolerance, aging, and EMI analyses, performance simulations, and design verification) to ensure meeting all environmental requirements for the application., • Develop project plans, budgets, schedules, and identify the resources to progress from market requirement through product release. Identify risks and develop contingency plans to mitigate schedule / technical threats to the program., • Contribute technical input, as well as material and labor cost estimates in support of winning tactical business opportunities and proposals., • Mentor, coach, and train engineers to facilitate greater levels of technical and professional achievement., • Support legacy product lines and resolve new product issues as they arise., • Work across departments to lead vendor or engineering outsource selection decisions based on technical performance, risk and cost tradeoffs., • Take the initiative to investigate and propose new method, process, technique, tool, component, or technology improvements for quality, timeliness, and efficiency., • Conduct in-depth technical interviews and make hiring recommendations for capable and talented technical staff to grow an effective Engineering team.

Job Description For more than 60 years, Data Device Corporation (DDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This position is 100% onsite at our Bohemia, NY office. Salary Range for this position is $20.00- $22.00 hourly, depending on experience. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary: This internship provides hands-on experience within DDC’s Manufacturing Engineering Organization, supporting process development, Test Engineering, Data Analysis, and continuous improvement initiatives. Key Position Accountabilities: • Support the setup and implementation of a new Circuit Card Assembly (CCA) manufacturing line, including process profiling, and documentation., • Assist in developing and updating work instructions, standard operating procedures (SOP’s), and manufacturing documentation., • Support testing and evaluation of new materials and processes., • Assist with Test Engineering data collection, organization, analysis, and reporting., • Support productivity and continuous improvement initiatives., • Assist with programming, setup, validation, and documentation of manufacturing and test equipment including Automation, Pick and Place, Optical Inspection, and Wire Bonding Equipment., • Document process development activities, test results, and equipment qualifications., • Collaborate with Process, Manufacturing, and Test Engineering Teams. Qualifications: • Sophomore standing or above in pursuit of a bachelor’s degree in engineering, Manufacturing Engineering, Industrial Engineering, Electrical Engineering, or a related technical field., • Basic engineering and electrical knowledge., • Familiarity with manufacturing processes and techniques., • Strong organizational and time management skills., • Basic technical writing and documentation skills., • Ability to work independently and as part of a team., • Strong attention to detail and willingness to learn in a manufacturing environment. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. This job description indicates, in general the nature and levels of work, knowledge, skills, abilities and other essential functions (as covered under the ADA) expected of the employee. Duties, responsibilities and activities may change at any time with or without notice as required. Data Device Corporation is an Affirmative Action/Equal Opportunity Employer and is committed to providing equal employment opportunity (EEO) for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, gender, sexual orientation, gender identity, national origin, citizenship status, marital status, genetic information, disability, protected veteran status or any other legally protected status.

Job Description Position Title: Business Development Manager For more than 60 years, Power Device Corporation (PDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This role necessitates frequent travel to customer locations (up to 60% travel). The compensation range for this role is $150,000 to $180,000 annually based on experience. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary: The Business Development Manager (BDM) is responsible for the management and coordination of operating unit business capture for the company within the area of geographic assignment. This includes the identification of new business opportunities and development of win strategies for business capture. The BDM is an individual contributor who will collaborate with senior functional leaders and technical experts. The BDM will work closely with each Business Unit Managers to meet respective unit objectives. Key Position Accountabilities: Develops Business Strategy: Owns the development of strategic and tactical plans to win profitable new business. This includes: • Utilizing research, obtains marketing intelligence and competitive data pertaining to potential targeted pursuits to develop win strategies., • Provides price to win and win strategy inputs to engineering and sales staff for preparation and/or presentation of proposals to customers., • Provides the voice of customer feedback to the sales, engineering and senior staff to ensure that updated or new company technologies/capabilities match with new and emerging customer requirements. Drives Sales: Maintains EBITDA in year one and positions for growth in year two by focusing on the following: • Leads customer visits and performs research to understand current and emerging customer needs and requirements., • Utilizes the internal sales, marketing and engineering resources in support of the integrated business development team strategy., • Functions as capture lead on assigned pursuits through the Bid/No Bid decision process., • Executes front-end business development. Participates, with guidance, in decisions regarding teaming and other agreements required for pursuits., • Builds long-term relationships with key decision makers at selected strategic accounts. Forecasts Opportunities: Generates and maintains Order Forecasts for selected strategic accounts by: • Tracks the lifecycle of business opportunities from lead generation through the negotiation and order booking process., • Clearly communicates updates from the customer, while specifically identifying hurdles to opportunity realization and assisting the Business Unit Managers to realize their respective business goals. Qualifications: • Education: Bachelor’s Degree required. MBA a plus., • Experience: 5-10 years of broad business knowledge with depth of expertise in sales within the aerospace and defense industry., • Demonstrated ability to drive results meeting business goals while exceeding customer expectations. Excellent sales experience in aerospace and/or defense electronics. Previous sales experience in military electronics considered a plus. Must have good financial acumen. Required Knowledge, Skills and Abilities: • Manages ambiguity, • Open to feedback, • Sense of urgency, • Proactively communicates, • Effectively prioritizes, • Sells and influences, • Determination/Grit, • Pragmatic/Practical, • Works independently, • Diplomatic tactful This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. This job description indicates, in general the nature and levels of work, knowledge, skills, abilities and other essential functions (as covered under the ADA) expected of the incumbent. Duties, responsibilities and activities may change at any time with or without notice as required. Power Device Corporation is an Affirmative Action/Equal Opportunity Employer and is committed to providing equal employment opportunity (EEO) for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, gender, sexual orientation, gender identity, national origin, citizenship status, marital status, genetic information, disability, protected veteran status or any other legally protected status.

Job Description IT Director Our Family Broadway National, one of Inc. 5000’s fastest growing privately owned companies, provides national and international Property Management services to high profile clientele throughout a wide range of businesses. Such businesses include Tech, Restaurant, Super Market, Facility Maintenance, Retail, Specialty and more. Job Responsibilities: • Own and maintain written IT and security policies, including acceptable use, access management, incident response, and data protection, • Establish and enforce an AI usage policy, including approved tools and guardrails to prevent data leakage, • Oversee onboarding and offboarding processes to ensure proper access provisioning and clean terminations, • Proactively identify and mitigate security risks across systems, users, and vendors, • Manage and optimize the Managed Service Provider (MSP) relationship, ensuring service quality, accountability, and value - not just ticket closure, • Oversee network management and configuration, ensuring performance, connectivity, and redundancy, • Manage API integrations supporting Broadway systems and workflows, • Oversee VOIP architecture and telecommunications infrastructure, • Lead stalled or complex infrastructure projects (e.g., switches, servers, networking upgrades) through completion, • Develop and maintain documentation including network diagrams, asset inventories, and operational runbooks, • Implement and manage mobile device management (MDM) for field and mobile employees, • Own asset tracking, lifecycle planning, and hardware refresh schedules, • Develop and maintain a documented business continuity and disaster recovery plan, • Create and execute a forward-looking technology roadmap aligned with business growth (2-3 year horizon), • Identify and implement AI-driven opportunities to improve efficiency, scalability, and operational effectiveness, • Partner closely with internal teams to identify technology and software efficiencies across platforms, • Own the IT budget, including forecasting, hardware refresh planning, and cost optimization, • Lead vendor, licensing, and contract management (software, telecom, MSPs, and technology partners), • Serve as a trusted advisor to executive leadership on technology risks, investments, and opportunities, • Partner with internal IT leadership (player/coach structure) to ensure help desk execution and project support, • Plan for future IT staffing needs as user count and ticket volume grow, • Be a strategic partner to senior leadership, using data and automation to drive revenue growth, margin expansion, and operational leverage., • Develop and implement customer-facing technology that supports sales, improves conversion, and increases customer retention Job Qualifications: • Bachelor’s degree in computer science, information technology or related field, • 5+ years of operational experience in IT client/end-user support and in IT Infrastructure, • 3+ years management experience (preferred), • Proven experience writing and implementing security and IT policies, • Direct experience responding to customer security questionnaires, • Experience managing and holding an MSP or outsourced IT provider accountable, • Demonstrated track record of delivering infrastructure projects on time and within budget, • Experience in organizations with approximately 150–500 employees, • Ability to remain strategic and avoid being pulled into daily ticket work, • Strong understanding of AI risks and practical business applications, • Experience with network management, API integrations, and VOIP systems, • Experience delivering revenue‑impacting digital initiatives (e.g., customer portals, ecommerce, data products, or self‑service tools)., • Experience implementing and maintaining SOC compliance initiatives (e.g., SOC 2), including coordination with auditors and internal stakeholders., • Proven ability to collaborate with Sales, Marketing, and Operations to design technology solutions that drive revenue growth and customer retention., • Experience defining and tracking business KPIs for technology initiatives (e.g., conversion, retention, margin, cost per ticket, automation rate)., • Strong financial acumen, including building business cases and ROI analyses for technology investments. Benefits: • Medical, Dental and Vision, • Company paid Group Term Life Insurance, • 401 (k) Retirement savings plan (company match), • Paid vacation, sick/personal time and floating holidays, • Paid Holidays Why Broadway? We aim to provide our employees with a family-oriented atmosphere, where they are encouraged and motivated in a comfortable setting, while still being given the proper tools to grow within the company. As we experience rapid growth each year, we strive to assure our employees grow with us. Our company welcomes both those who have industry experience and those who are interested in learning about the facility maintenance business. We offer extensive training to new hires, providing them with the skill set needed to succeed. Our goal is to not only to provide exceptional customer service to our clients, but also to create an environment where employees flourish. We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. #IND1

Job Description For more than 60 years, Power Device Corporation (DDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This position is 100% onsite at our Bohemia, NY office. The compensation for this role is $100,000 to $140,000 annually based on experience. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary: The QA Engineer, Sr plays a key role in driving product excellence and customer satisfaction by leading quality initiatives and resolving complex challenges. This includes collaboration with cross-functional teams, suppliers, and customers while shaping best practices in compliance, testing, and inspections. The Senior QA Engineer also mentors junior team members and have the opportunity to influence quality strategy across the organization. Key Position Accountabilities: • Provide day-to-day Quality Assurance Engineering support to all areas of the company (Manufacturing, Engineering, Product Development, Procurement, and Product Assurance). This includes the timely resolution of production issues in an effort to support the on-time and cost-efficient shipment of quality products., • Establish and maintain quality planning procedures. Ensure that performance and quality products conform to established company and regulatory standards, are properly documented to assure uniformity, and communicated to appropriate parties., • Resolve quality issues/discrepancies to full resolution. This includes, but not limited to, cross-functional teams and communication with suppliers and customers., • Responsible for understanding customer performance/quality requirements, measuring our performance against these requirements, and communicating to appropriate parties., • Perform internal audits of department processes and procedures., • Analyze and investigate the root cause of non-conforming product deficiencies. This encompasses generating and analyzing of failure analysis reports, review of parts, manufacturing processes, RMAs, materials issues, development of disposition, corrective and preventative actions, and verification of their effectiveness., • Review specification control drawings and generate quality plans (PAP, PPAP)., • Assist Incoming Inspection with material disposition and Material Review Reports., • Review/approve engineering change notices, manufacturing processes, and SOP’s to insure compliance and up-to-date., • Plan, monitor and track product qualification testing per customer specifications or DDC’s internal procedures., • Contribute technical input, as well as material and labor cost estimates in support of tactical business opportunities and proposals., • Perform Source Inspection at vendor sites, and support customer Source Inspection at DDC, as needed., • Travel <10%, • Provide training, mentorship, and coaching to junior members of the Quality Assurance team to ensure their continuous development and alignment with company quality standards, processes, and best practices. Qualifications: • Bachelor’s degree in appropriate Engineering, Industrial Engineering, Mathematics/Statistics, or Applied Sciences is desired. Six Sigma knowledge a plus., • Minimum 7 years related Quality Assurance Engineering experience., • Knowledge of quality, military, and industry standards AS9100, MIL-PRF-38534, MIL-STD-883, and/or IPC-A-610 desired., • Demonstrated ability to develop, analyze, articulate and present technical information in both written and verbal forms., • Demonstrated ability to develop excellent working relationships with management, customers, and vendors., • Excellent project and time management skills. Work Environment: • This position requires access to a cleanroom environment. In order to promote an environment with a low level of airborne environmental pollutants employees must at all times adhere to company procedures., • The cleanroom area is accessed via an air shower wearing an ESD lab coat and hair net Physical Demands: • The physical demands described here are representative of those that must be met with or without a reasonable accommodation by an employee to successfully perform the essential functions of this job., • While performing the duties of this job, the employee is regularly required to move product and equipment and to occasionally lift office products and supplies, up to 20 pounds. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. This job description indicates, in general the nature and levels of work, knowledge, skills, abilities and other essential functions (as covered under the ADA) expected of the employee. Duties, responsibilities and activities may change at any time with or without notice as required. Data Device Corporation is an Affirmative Action/Equal Opportunity Employer and is committed to providing equal employment opportunity (EEO) for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, gender, sexual orientation, gender identity, national origin, citizenship status, marital status, genetic information, disability, protected veteran status or any other legally protected status.

Job Description For more than 50 years, Data Device Corporation (DDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This position is 100% onsite at our Bohemia, NY office Salary Range for this position is 90,000 -110,000, depending on experience. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary: The Buyer/Planner Sr. Sr. Buyer is responsible for strategic sourcing selection and procurement functions directly associated with DDC’s needs for materials, capital equipment and services. The individual will be responsible for driving competitive supply strategies to achieve lowest total cost, sole/single source elimination and managing suppliers to ensure supply continuity, and is instrumental in helping DDC achieve its annual revenue, profitability and productivity goals. Key Position Accountabilities: • Analyzes operational processes to provide analytical and strategic sourcing execution in support of the company’s buying practices., • Manages the procurement process from receipt of purchase requisition through delivery of material, confirming price and expected delivery dates., • Secures and analyzes quotations, negotiates price and terms with suppliers and recommend suppliers with respect to cost, quality and delivery competitiveness for assigned responsibilities., • Capitalize on productivity opportunities including volume pricing/long term agreements, strategic source selection, blanket orders, etc., • Resolve pricing/lead time challenges that do not meet business needs. Elevates supplier delinquencies that delays production and delivery to appropriate personnel., • Review periodically to ensure on time delivery, accurate lead times in MRP, JIT material receipts to improve inventory turns and optimize inventory levels., • Leads/contributes assigned team projects, audits and vendor evaluations. Collaborate with cross functional teams as required to ensure kit fills, workflow, successful new product qualification,, • Develops and maintain robust analytical models & tools to analyze supply chain data, identify trends and provide actionable insights., • Develops and implements strategic solutions to meet departmental goals., • Ensure that safe work practices are followed and the environment is fully protected in accordance with Company policy and governmental regulations., • Plan and forecast raw material requirements to ensure timely availability for production, while maintaining optimal inventory levels to support operational needs., • Assists in the training of Buyers and Jr. Buyers (as required). Qualifications: • Bachelor’s degree or equivalent work experience, • 5-10 years relevant work experience preferred, ideally in an electronics industry, • Professional Certifications in Project/Supply Chain/ Procurement/Contract Management preferred, • Strong analytical and advanced Excel skills required Desired Characteristics: • Extensive experience in procurement and supplier negotiations obtaining best schedules, prices & terms, risk management, • Effective oral, written and presentation skills with the ability to influence using data, risk/benefit analysis. The person in this position frequently communicates with peers. Must be able to exchange efficiently in these situations., • Extensive Knowledge of global supply chain management principles., • Ability to analyze, organize and prioritize work while meeting multiple deadlines with minimal guidance., • Ability to research and analyze various different types of date information and offer strategic solutions to aid company goals. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. This job description indicates, in general the nature and levels of work, knowledge, skills, abilities and other essential functions (as covered under the ADA) expected of the incumbent. Duties, responsibilities and activities may change at any time with or without notice as required. Data Device Corporation is an Affirmative Action/Equal Opportunity Employer and is committed to providing equal employment opportunity (EEO) for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, gender, sexual orientation, gender identity, national origin, citizenship status, marital status, genetic information, disability, protected veteran status or any other legally protected status.

Job Description For more than 60 years, DDC has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This position is 100% onsite at our Bohemia, NY office. The compensation for this role will be $70,000 to $105,000 annually. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary The Quality Assurance Engineer supports product quality and compliance across Manufacturing, Engineering, Product Development, Procurement, and Product Assurance. This role assists with quality planning, audits, root cause analysis, and corrective actions to ensure timely delivery of reliable, cost-effective products. The QA Engineer also works closely with cross-functional teams, suppliers, and customers while gaining exposure to product qualification, testing, and inspections. Key Position Accountabilities: • Responsible for Product Assurance Conformance and Compliance requirements, as defined by the DDC Quality Management System (QMS), • Provide day-to-day Quality Assurance Engineering support to all areas of the company (Manufacturing, Engineering, Product Development, Procurement, and Product Assurance). This includes the timely resolution of production issues in an effort to support the on-time and cost-efficient shipment of quality products, • Maintain, improve, and create quality control procedures. Ensure that performance and quality products conform to established company and regulatory standards, are properly documented to assure uniformity, and communicated to appropriate parties, • Resolve quality issues/discrepancies to full resolution. This includes, but not limited to, continuous improvement, cross-functional teams, and collaboration with suppliers, colleagues, and customers, • Responsible for understanding customer performance/quality requirements, measuring our performance against these requirements, and communicating the results to all appropriate parties, • Perform internal audits of department processes and procedures, IAW AS9100 & MIL-PRF-38534, • Analyze and investigate the root cause of non-conforming product deficiencies. This encompasses generating and analyzing failure analysis reports, review of parts, manufacturing processes, RMAs, materials issues, development of disposition, corrective and preventative actions, and verification of their effectiveness, • Review specification control drawings and generate quality plans (Product Assurance Plan), • Assist Incoming Inspection with material disposition and Material Review Reports, via the Material Review Board, • Assist In-Process & Final Inspection with product disposition and Inspection Discrepancy Reports, • Review and disposition engineering change notices, manufacturing processes, and SOP’s to ensure compliance, • Plan, monitor, and report on product qualification testing per stakeholder specifications, • Contribute technical input, as well as material and labor cost estimates in support of both tactical and strategic business opportunities and proposals, • Support customer Source Inspections at DDC, • Attend Source Inspections, Audits, and Conferences at vendor and customer sites to support the mission, • Travel ˜ 10% Job Qualifications - Education/Experience • A Bachelor’s Degree in Engineering, Mathematics, or Applied Sciences is preferred, • Six Sigma Certification (e.g. CSSGB, or comparable) is preferred, • 3 years of related experience (Manufacturing, Industrial, etc.) is preferred, • Knowledge of AS9100, MIL-PRF-38534, MIL-STD-883, and IPC-A-610 is preferred, • Demonstrated ability to develop, analyze, articulate and present technical information in both written and verbal forms, • Demonstrated ability to develop excellent working relationships with management, customers, and vendors, • Excellent time management skills Work Environment: • This position requires access to a cleanroom environment. In order to promote an environment with a low level of airborne environmental pollutants employees must at all times adhere to company procedures., • The cleanroom area is accessed via an air shower wearing an ESD lab coat and hair net This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. This job description indicates, in general, the nature and levels of work, knowledge, skills, abilities and other essential functions (as covered under the ADA) expected of the incumbent. Duties, responsibilities and activities may change at any time with or without notice as required. Data Device Corporation is an Affirmative Action/Equal Opportunity Employer and is committed to providing equal employment opportunity (EEO) for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, gender, sexual orientation, gender identity, national origin, citizenship status, marital status, genetic information, disability, protected veteran status or any other legally protected status.

Job Description Principal Electrical Engineer Responsibilities: • To take primary technical leadership in the design, management, and support for our motion control product lines:, • Synchro / Resolver to Digital converters, • DATEL A to D, and D to A converters, • Switched-mode multi-phase Brushless DC Motor (BLDC) drivers & controllers, • This role requires a deep understanding of analog / mixed signal circuit analysis and design techniques, to meet demanding dynamic range, EMI, noise and power specifications. The candidate should possess strong technical leadership, in order to drive our interdisciplinary Engineering team through all phases of product life cycle development- from requirements, architecture, and detailed design, through to design validation, device verification, qualification, including support for the handoffs to test and product manufacturing. Our product lines require continuous obsolescence review, with support for alternate part qualification or redesign, to help our military & aerospace customers manage the product life cycle., • Extract clear requirements and specs from marketing inputs, customer documents & meetings., • Engage early with the customer, to guide requirements toward those that yield a more realizable, higher value product., • Distill large-scale designs down to their architectural elements, and develop unique, innovative analog & digital hardware solutions. Consider & pursue patent applications as differentiators to secure our competitive advantage., • Generate reports, present findings & provide continuous feedback to the team throughout the review process- good communication is essential., • Develop creative approaches that favorably optimize complex design tradeoffs for: product cost, performance, feature set, time to market, and technical risk., • Follow a defined design process, coordinating technical reviews with the associated disciplines to facilitate good DFM outcomes in terms of yields, cost and performance., • Manage support and verification activities (thermal, electrical stress, worst-case, FMEA, tolerance, aging, and EMI analyses, performance simulations, and design verification) to ensure all requirements are met for the intended application., • Develop project plans, budgets, schedules; identify the resources required to get from market requirement to product release. Identify risks and develop contingency plans to mitigate schedule / technical threats to the program., • Provide technical guidance, including material and labor cost estimates to support winning tactical business opportunities and proposals., • Mentor, coach, and train engineers to greater levels of technical and professional achievement., • Adopt and support legacy product lines, resolving new vendor materials / product issues as they arise., • Investigate new methods, processes, techniques, tools, components, and technologies that may lead to improvements in quality, timeliness, and efficiency., • Conduct in-depth technical interviews and make hiring recommendations to further build out a capable and talented technical Engineering team.Qualifying Experience:, • Bachelor’s degree in Electrical Engineering; Graduate Engineering degree preferred., • Deep bench of Analog Circuit design:, • Multiple A to D architectures (multi-pass SAR, Flash, Sigma Delta, Pipeline) and D to A (serial DACs, R2R, current steering, charge scaling)., • Low noise and high dynamic range techniques, sample acquisition and hold circuits, Bandgap references., • Oscillators, VCO’s, Op-amps, Switched Capacitor Circuits; Active Filters, single ended / common & differential mode circuits. PCB design techniques for low noise, low EMI, and high current., • Type 2 control loops as used in Synchro to digital converters; resolver to synchro transformers, phase / frequency control loops, stability analysis. Comfortable with analysis in both time & frequency domains., • Control theory and Matrix mathematics including Z domain transform for digital control; Clark and Park transform theory., • Sensors / detectors- inductive, Hall, optical, LVDT, Synchro / Resolvers and Encoders., • Proficient with CAD tools such as LT-Spice, P-Spice, OrCAD, Allegro and Pantheon., • Analog / mixed signal ASIC design and verification using Cadence, Synopsis, or Siemens tool suites a plus., • Power electronics / power management (Buck/Boost, LDO, Charge Pump, Inverters using MOSFET, IGBT, SiC and GaN devices)., • Motor control system simulation, • Space-level radiation hardened design for analog and digital circuits- rad lot testing, ionizing radiation, single event upset and total dose analysis regarding component selection., • High level understanding of thermal, electrical stress, worst case, FMEA, tolerance, aging, and design for low EMI.

Job Description For more than 60 years, Power Device Corporation (PDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This position is 100% onsite at our Bohemia, NY location. The compensation for this role is $120,000 - $160,000 annually based on experience. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary: To continue to meet our customer’s mission critical needs, PDC is seeking an Analog/Mixed Signal Design Engineer to join our dynamic, growing organization as a valued member of our team. The candidate needs experience in developing devices with active / passive signal converter & conditioning circuits and switching power control / driver circuits; designs are implemented either as a multi-chip & wire hermetically-sealed hybrids, or as SMT Circuit Card Assemblies (CCA’s). Responsibilities: • Key role: Take primary technical leadership in the design and support of our Synchro / Resolver to Digital, DATEL A2D & D2A mixed signal converter product lines, and our switched-mode multi-phase Brushless DC Motor (BLDC) driver & controller product lines. This requires a deep understanding of analog / mixed signal analysis and design techniques to ensure device specifications are met with robust margin. You will guide an interdisciplinary Engineering team through the phases of product life cycle development from requirements, architecture, & detailed design, through to device verification, qualification, and manage the transition to production. Our legacy models require continuous obsolescence review and at times may need redesign to support our mil- aero customer base. Requirements: • Bachelor’s degree in Electrical Engineering; Graduate Engineering degree a plus., • 7+ minimum years of experience, • Deep bench of Analog Circuit design experience in multiple A to D architectures (multiple pass SAR, Flash, Sigma Delta, Pipeline) and D to A (serial DACs, R2R, current steering, charge scaling). Experience should cover low noise and high dynamic range techniques, sample acquisition and hold circuits, Bandgap reference, Oscillators, Op-amps, Switched Capacitor Circuits, Active Filters, single ended & differential circuits, phase / frequency control loops and stability analysis. Comfort working both time & frequency domains a plus., • Experience in power electronics / power management (Buck/Boost, LDO, Charge Pump, Inverters using MOSFET, IGBT, SiC and GaN Power devices., • Analog / mixed signal ASIC design and verification using Cadence or Tanner tool suites., • Experience with space-level radiation tolerant / hardened design, rad lot testing, ionizing radiation, single event upset and total dose analysis regarding component selection., • Sensors, including LVDT, Synchro / Resolvers and Encoders., • Control theory and Matrix mathematics including Z domain transform for digital control; Experience with Motor control simulation, • Clark and Park transform theory, • High level understanding of thermal, electrical stress, worst case, FMEA, tolerance, aging, and design for low EMI., • Experience with CAD tools such as LT-Spice, P-Spice, OrCAD, Allegro, PADS., • Candidate must be a US Citizen, Permanent Resident or Green Card Holder due to Export control laws. Essential Duties: • Develop clear requirements and specs from marketing / customer documents., • Provide early customer interaction to guide requirements toward more realizable product., • Distill large-scale designs down to their architectural elements, and develop unique, innovative analog and digital hardware design solutions. Consider & pursue patent application for differentiators that will help secure competitive advantage., • Generate reports and present findings to the team throughout the review process. Facilitate DFM by coordinating teams of varied technical disciplines through a clearly defined design process. Co-ordinate technical reviews with other groups., • Develop creative approaches that favorably optimize complex design tradeoffs for product cost, performance, feature set, time to market, and technical risk. Anticipate potential difficulties and develop alternative plans., • Manage support and verification activities (thermal, electrical stress, worst-case, FMEA, tolerance, aging, and EMI analyses, performance simulations, and design verification) to ensure meeting all environmental requirements for the application., • Develop project plans, budgets, schedules, and identify the resources to progress from market requirement through product release. Identify risks and develop contingency plans to mitigate schedule / technical threats to the program., • Contribute technical input, as well as material and labor cost estimates in support of winning tactical business opportunities and proposals., • Mentor, coach, and train engineers to facilitate greater levels of technical and professional achievement., • Support legacy product lines and resolve new product issues as they arise., • Work across departments to lead vendor or engineering outsource selection decisions based on technical performance, risk and cost tradeoffs., • Take the initiative to investigate and propose new method, process, technique, tool, component, or technology improvements for quality, timeliness, and efficiency., • Conduct in-depth technical interviews and make hiring recommendations for capable and talented technical staff to grow an effective Engineering team. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. This job description indicates, in general the nature and levels of work, knowledge, skills, abilities and other essential functions (as covered under the ADA) expected of the incumbent. Duties, responsibilities and activities may change at any time with or without notice as required. Power Device Corporation is an Affirmative Action/Equal Opportunity Employer and is committed to providing equal employment opportunity (EEO) for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, gender, sexual orientation, gender identity, national origin, citizenship status, marital status, genetic information, disability, protected veteran status or any other legally protected status.

Job Description For more than 60 years, Data Device Corporation (DDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. Salary Range for this position is 120,000 to 175, 000 depending on experience. This role requires frequent travel (up to 60%). While the position is preferably based onsite at our Bohemia, NY office, remote candidates will be considered. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary: The Business Development Manager (BDM) is responsible for the management and coordination of operating unit business capture for the company within the area of geographic assignment. This includes the identification of new business opportunities and development of win strategies for business capture. The BDM is an individual contributor who will collaborate with senior functional leaders and technical experts across all three of DDC’s business units. The BDM will work closely with each Business Unit Managers to meet respective unit objectives. Key Position Accountabilities: Develops Business Strategy: Owns the development of strategic and tactical plans to win profitable new business. This includes: • Utilizing research, obtains marketing intelligence and competitive data pertaining to potential targeted pursuits to develop win strategies., • Provides price to win and win strategy inputs to engineering and sales staff for preparation and/or presentation of proposals to customers., • Provides the voice of customer feedback to the sales, engineering and senior staff to ensure that updated or new company technologies/capabilities match with new and emerging customer requirements. Drives Sales: Maintains EBITDA in year one and positions for growth in year two by focusing on the following: • Leads customer visits and performs research to understand current and emerging customer needs and requirements., • Utilizes the internal sales, marketing and engineering resources in support of the integrated business development team strategy., • Functions as capture lead on assigned pursuits through the Bid/No Bid decision process., • Executes front-end business development. Participates, with guidance, in decisions regarding teaming and other agreements required for pursuits., • Builds long-term relationships with key decision makers at selected strategic accounts. Forecasts Opportunities: Generates and maintains Order Forecasts for selected strategic accounts by: • Tracks the lifecycle of business opportunities from lead generation through the negotiation and order booking process., • Clearly communicates updates from the customer, while specifically identifying hurdles to opportunity realization and assisting the Business Unit Managers to realize their respective business goals. Qualifications: • Education: Bachelor’s Degree required. MBA a plus., • Experience: 5-10 years of broad business knowledge with depth of expertise in sales within the aerospace and defense industry., • Demonstrated ability to drive results meeting business goals while exceeding customer expectations. Excellent sales experience in aerospace and/or defense electronics. Previous sales experience in military electronics considered a plus. Must have good financial acumen. Desired Characteristics: • Manages ambiguity, • Open to feedback, • Sense of urgency, • Proactively communicates, • Effectively prioritizes, • Sells and influences, • Determination/Grit, • Pragmatic/Practical, • Works independently, • Diplomatic tactful This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. This job description indicates, in general the nature and levels of work, knowledge, skills, abilities and other essential functions (as covered under the ADA) expected of the employee. Duties, responsibilities and activities may change at any time with or without notice as required. Data Device Corporation is an Affirmative Action/Equal Opportunity Employer and is committed to providing equal employment opportunity (EEO) for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, gender, sexual orientation, gender identity, national origin, citizenship status, marital status, genetic information, disability, protected veteran status or any other legally protected status.

Job DescriptionSalary: $32 per hour Arctiq is a global, intelligence-driven technology services company delivering professional and managed services across Hybrid Cloud Infrastructure, Networking & Connected Experiences, Cybersecurity, Data & AI, Autonomous Operations & Intelligence, and Enterprise Service Management. We help organizations operate, secure, and modernize complex environments by unifying infrastructure, networking, data, security, automation, and observability under a single, integrated operating model. Our work focuses on helping customers reduce operational friction, improve resilience, and make better, faster decisions as their environments evolve. Arctiq builds on decades of industry expertise and a customer-centric ethos to deliver exceptional value to clients across diverse industries. We are seeking a skilled and motivated Systems & Network Administrator to join our Technology Department. This individual will serve as a front-line technology support resource while also contributing to the management and maintenance of the district's broader infrastructure. The ideal candidate is comfortable moving between hands-on helpdesk support and more advanced systems and networking tasks, and thrives in a fast-paced K12 environment. This is a full-time position with Arctiq supporting a client with multiple locations in the local area. The position will require traveling between the different locations. Key Responsibilities Helpdesk & End-User Support (Primary) • Serve as the first point of contact for technology support requests submitted via ServiceDeskPlus, providing timely Level 1 troubleshooting and resolution, • Perform break/fix support on a wide range of classroom and office technology including desktop PCs, laptops, Chromebooks, iPads, interactive smartboards, and printers, • Assist staff and students with day-to-day technology issues including connectivity, login problems, application errors, and peripheral setup, • Coordinate repair or replacement of devices that cannot be resolved in the field, maintaining accurate asset and ticket records throughout the process, • Support classroom technology deployments, new device setups, and end-of-year refresh cycles Systems, Network & Infrastructure • Manage and troubleshoot district-wide networking infrastructure including routers, switches, access points, and related systems, • Maintain virtualized environments using VMware vCenter, including VM lifecycle management, snapshot administration, and resource allocation, • Deploy and enforce endpoint policies across Windows devices via Microsoft Intune, • Administer Chromebook fleet management through Google Admin Console, including policy enforcement, device provisioning, and OU management, • Support iPad management workflows through Jamf, • Maintain accurate asset records and manage the helpdesk ticket queue through ManageEngine ServiceDeskPlus, • Collaborate with building-level staff and the central technology team to identify and resolve technical issues in a timely manner, • Participate in technology planning, deployments, and refresh cycles as needed Required Qualifications • 3+ years of experience in a helpdesk, desktop support, or systems administration role, preferably in a K12 or education environment, • Demonstrated proficiency in troubleshooting end-user hardware and software issues across a variety of device types, • Solid understanding of networking fundamentals including routing, switching, and wireless connectivity, • Strong communication skills with the ability to support both technical and non-technical end users, • Ability to manage multiple priorities and work independently in a fast-paced environment, • Comfortable working directly with students and staff in classroom and office settings Preferred Qualifications • Experience with VMware vCenter for virtual machine management, • Familiarity with Microsoft Intune for Windows device and policy management, • Experience with Google Admin Console for Chromebook fleet administration, • Exposure to Jamf for iOS/iPad MDM management, • Working knowledge of ManageEngine Endpoint Central or ServiceDeskPlus, • Relevant certifications (CompTIA A+, Network+, Microsoft certifications, Google certifications, etc.) Working Conditions • Full-time, 12-month position, 40 hrs per week, • On-site presence required across multiple district buildings, • Occasional after-hours work for maintenance windows, deployments, and emergency support, • Physical requirements include the ability to lift and carry equipment and work in varied building environments

Job Description The Help Desk duties which may include, but are not limited to: Providing outstanding customer service for Tier 1 service requests, incidents, and problems reported by Clients. The Technician will troubleshoot and resolve technical and procedural issues in an efficient and timely fashion over the phone, in person and through remote connectivity software. Help requests will come from our clients through email, phone calls, or the help desk system. The Help Desk Technician will ensure that all Service Desk requests, incidents, and problems are entered into ticket tracking system with accurate, detailed information. This position is also responsible for procurement, issuance, tracking of new and/or replacement computers/peripheral devices for customers as needed, ensuring replacement device is working properly. Must be able to work flexible hours with the understanding that workdays can be in excess of normal hours and some weekend and holiday work may be required. Responsibilities: • Help Desk or Service Desk experience, • Fundamental Client Network configuration and troubleshooting using TCP/IP over Ethernet, Wireless Networking and WAN, • Printer installation, maintenance, and troubleshooting, • Installation, management, and support of Malware removal tools (anti-virus, anti-spam), • Maintenance and upgrades of desktop PCs, thin clients, peripherals, laptops and the software that they contain Provide hardware and software technical and procedural support to external clients, • Knowledge and hands-on experience with the following: Operating Systems: Windows 2008/2012 Server, Windows XP/7, and Windows 8.1., • Windows Server Activate Directory Experience (Create, Edit and Delete Users Accounts, Unlock Account, Group, Permissions), • Microsoft Exchange Knowledge, • Working knowledge of remote connectivity technologies such as Citrix, VMware View, Team Viewer, VNC and Microsoft Remote Desktop Required Experience and Qualifications: • Associate’s degree or currently enrolled in a IT related degree program; experience may be substituted for education, • Entry Level with 1-2 years’ Experience in related field, • Effective customer service, and verbal and written communication skills Strong organizational and analyzing skills, • Ability to work independently and as part of a team, • Professional attitude, self-motivated, strong work ethic and the ability to work in a fast-paced and dynamic environment, • Be committed to Ozkar Services mission, and be willing to go above and beyond, • Ability to be “on call" and “on standby" in relation to the workload, • Ability to complete on-the-job and/or classroom training in order to remain competitive in Information Technology field., • Working Knowledge on Ticketing System ConnectWise and Management Console LabTech, • Must be able to Multitask in stressful office environment, • Technical Certification Requirements: Comp-TIA A+, Comp-Tia Network +, Microsoft MSCE, Cisco CAN Work Environment: • Employee must be able to travel to other work sites as required, • Must be able to lift 75 lbs

Job Description Digital Provisions, is the leading security integrator on Long Island, New York, delivering advanced security solutions to a wide range of clients, including K-12 schools, businesses, and public institutions. Our passion lies in creating safe environments by partnering with educators, government officials, law enforcement, and private enterprises. Through these collaborations, we design and deploy comprehensive security systems tailored to each client's unique needs. Whether safeguarding schools, businesses, or public spaces, we have the expertise to assess risks and implement solutions that protect people and property, allowing our clients to focus on their core missions. As a Security Field Service Technician, you would be responsible for diagnosing, configuring, and maintaining a variety of security systems, including access control, surveillance cameras, intrusion alarms, and structured low-voltage cabling. This position centers on resolving service tickets, ensuring all systems comply with industry standards, and meeting customer expectations. The ideal candidate will possess a strong background in low-voltage technology, a comprehensive understanding of security infrastructure, and the ability to deliver top-quality repairs within commercial settings. Real-time documentation of completed work is also required. Key Responsibilities: • Security and Fire System Installation & Configuration, • Troubleshoot and repair access control systems, surveillance cameras, intrusion alarms, and security automation systems., • Troubleshoot and repair low-voltage devices such as door controllers, card readers, cameras, and alarm sensors., • Perform low-voltage circuit wiring, terminations, and connections for security equipment., • Perform inspections, testing, and maintenance (ITM) of fire alarm, detection, and suppression control systems., • Ensure all systems are operational, tested, and optimized for customer use., • Ensure systems meet all NFPA, state, and local regulatory requirements., • Interpret and follow blueprints, wiring diagrams, and technical specifications for system layouts., • Low-Voltage & Composite Wiring, • Pull, terminate, and manage various types of low voltage cabling for security devices., • Ensure proper wire management and organization for professional-grade installations., • Work with conduits, cable management systems, and structured cabling pathways., • System Integration & Programming, • Integrate security systems with network infrastructure, access control platforms, and video management software., • Perform basic IP networking configurations, including assigning static IPs and setting up remote access., • Conduct firmware updates and apply necessary patches to security devices., • Compliance & Safety, • Follow OSHA safety protocols and industry best practices for low-voltage electrical work., • Ensure all work complies with local, state, and national low-voltage regulations., • Maintain organized documentation for system installations, device locations, and wiring pathways. Qualifications: • 3+ years of experience in security system installation and low-voltage infrastructure. *REQUIRED, • Strong proficiency in access control systems, surveillance cameras, and alarm systems (e.g., Milestone, Axis, Genetec, Lenel S2, Bosch)., • Hands-on experience with low-voltage wiring, terminations, and composite wiring., • Ability to read and interpret electrical schematics and security layouts., • Strong attention to detail and ability to produce clean, professional installations., • Valid driver's license with a clean record and ability to travel to job sites. Preferred: • Experience with relay logic, maglocks, and door strike installations., • Knowledge of power supply configurations and PoE device setups., • Relevant manufacturer certifications (e.g., Milestone, Lenel S2, Genetec, Axis). Work Environment & Physical Demands: • On-site work at customer locations, including commercial buildings, schools, and industrial facilities., • Ability to lift 50+ lbs, climb ladders, and work in tight spaces., • Comfortable standing for long periods of time and complete overhead work for long periods of time., • Standard schedule is Monday through Friday, 3pm to 11pm; flexibility for overtime and on-call scheduling is required. Benefits: • Pay of $50 per hour, • 10 days of PTO, • Five paid sick days, • Nine paid holidays, • Health insurance, • 401k Retirement Benefits, • Required training/licensing paid for by company, • Voluntary professional development opportunities, • Overtime and potential bonus pay

Additionally, all devices should have a camera with GPS. The Spark Driver app is available on both iOS and Android mobile devices.

The Spark Driver app is available on both iOS and Android mobile devices. Additionally, all devices should have a camera with GPS.

The Spark Driver app is available on both iOS and Android mobile devices. Additionally, all devices should have a camera with GPS.

The Spark Driver app is available on both iOS and Android mobile devices. Additionally, all devices should have a camera with GPS.

We're currently looking for individuals across the country to take part in remote paid market research, including online focus groups, product trials, and consumer studies.Earn up to $750 a week in your free time by providing feedback on everyday products and services.If you're comfortable sharing y

The Spark Driver app is available on both iOS and Android mobile devices. Additionally, all devices should have a camera with GPS.

Amazon delivery partner opportunity - Earn $25.What is Amazon Flex? It's simple! Use your vehicle and smartphone to earn extra money delivering with a brand you trust.With Amazon Flex, you only deliver when you want to.Amazon Flex pays delivery partners for completing delivery blocks.When you schedu

The Spark Driver app is available on both iOS and Android mobile devices. Additionally, all devices should have a camera with GPS.

The Spark Driver app is available on both iOS and Android mobile devices. Additionally, all devices should have a camera with GPS.

Amazon delivery partner opportunity - Earn $25.What is Amazon Flex? It's simple! Use your vehicle and smartphone to earn extra money delivering with a brand you trust.With Amazon Flex, you only deliver when you want to.Amazon Flex pays delivery partners for completing delivery blocks.When you schedu

Independent Same-Day Catering Delivery Driver.DeliverThat is built for the ones who show upthe early risers, the hustlers, and the doers.We're seeking confident and dependable independent contract delivery professionals across the U.Join a driver-first platform that values your time, respects your h

Amazon delivery partner opportunity - Earn $25.What is Amazon Flex? It's simple! Use your vehicle and smartphone to earn extra money delivering with a brand you trust.With Amazon Flex, you only deliver when you want to.Amazon Flex pays delivery partners for completing delivery blocks.When you schedu

Cell phone (smart phone preferred) along with email and basic computer/mobile device.

Adhere to our safety policies which include the prohibited use of electronic devices while driving and reporting any on-the-job incidents or changes in driving status.

Family First Home Companions is a highly reputable in-home caregiving service that helps older adults throughout Long Island and surrounding communities maintain their independence and well-being at home.We are seeking an experienced Outside Sales Representative to join our marketing team and build

Track all activity in the CRM (Customer Relations Management) Tool.

Ability to effectively communicate and follow-up with customers, vendors, team members, and management.

On Premise Sales Representative - Long Island, NY.At Union Beer Distributing, we believe in doing right by our employees, suppliers, customers, and communities.We believe hard work delivers results.And we believe these values are why our network of distributors, the Sheehan Family Companies, has bee

Please note that management retains the right to assign or reassign duties and responsibilities to this job at any time.

Parts Counter Sales Representative.Parts Counter Sales Representatives are responsible for front-line customer service in a variety of parts ordering functions.Responsibilities include assisting customers, taking parts orders, researching technical data for the correct part or parts and data entry.P

You will be responsible for building rapport with customers and professional relationships with store management and employees. Responsible for maintaining professional relationships with management and staff within assigned store.

Join our dynamic team as an Inside Salesperson, where you'll have the exciting opportunity to work closely with clients and deliver an exceptional customer experience! In this role, you will be the driving force behind generating sales across all our fantastic product lines.You'll engage with our va

We are a very busy office and are looking for our next great team member.This busy insurance and financial services office has a passion to make a difference in the lives of others and better the community.We are a growing agency with big dreams and lots of potential.Our team works hard to reach our

Household Sales Representative.Pay: $80K$150K/year full commission pay structure.Why Join Culligan? Culligan is a leader in water treatment technology, providing innovative solutions to improve the quality of life through better water.By joining our team, you will have the opportunity to make a mea

Reports industry trends, competitive pricing and customer feedback to management.

Rapid Home Service Group - Long Island, NY - For Home Improvement, Remodeling and/or Construction.If you're a closer, read that again.If you're a hitter stuck in a slow environment, this is your shot.At Rapid Home Service Group, our top Project Reps are earning two hundred to three hundred thousand

Your primary focus will be face-to-face selling and account management activities to meet sales revenue goals by assessing customer needs and suggesting appropriate products, services and/or solutions including bundled product and labor solutions in a project-based sales environment and ensure a smo

Our client is the leading provider of premium window solutions in the country.They are dedicated to enhancing homes and commercial spaces with innovation and quality craftsmanship.With a commitment to excellence and customer satisfaction, we have established ourselves as a trusted name in the indust

Off Premise Beer Sales Representative.At Union Beer Distributing, we believe in doing right by our employees, suppliers, customers, and communities.We believe hard work delivers results.And we believe these values are why our network of distributors, the Sheehan Family Companies, has been in busines

Strong time management and organizational skills.

Cell phone (smart phone preferred) along with email and basic computer/mobile device.

We are seeking a motivated insurance sales agent to join our team.In this role, you will be responsible for identifying potential clients, assessing their insurance needs, and recommending appropriate insurance products.Key duties include building and maintaining client relationships, explaining pol