Trabajos entry level technical en New Brunswick, New JerseyCrear alertas

Job Title: Inventory Clerk Department: Distribution Department Reports To: Inventory Supervisor FLSA Status: Hourly Schedule: M-F; 8:00am- 4:30pm *subject to change, depending on business needs Pay Range: $20.00/hour- $25.00/hour, based on experience Benefits: Medical, Dental, Vision Insurance, Matching 401k, Sick Pay, Floating holidays, Additional benefits & perks SUMMARY As an active and collaborative department team member, you will ensure full compliance with company policies while making improvements in inventory accuracy and on-time order delivery to meet customer demands. ESSENTIAL DUTIES AND RESPONSIBILITIES • Perform Cycle counts in a fast-paced environment; investigate inventory discrepancies and report findings to the supervisor., • Apply the FIFO (First In, First Out) method for order picking and router processing; strictly adhere to Good Documentation Practices (GDP) and current Good Manufacturing Practices (cGMP)., • Safely transfer materials throughout the warehouse using material handling equipment (e.g., forklifts/hand trucks)., • Execute system transactions accurately via Oracle, RF scanners, or manual entry., • Complete additional tasks assigned by the supervisor to support daily operational goals. SUPERVISORY RESPONSIBILITIES None REQUIRED SKILLS/ ABILITIES: • Alignment with Spectrum Core Values: Trust, Teamwork, Agility, Customer Focus, Continuous Improvement., • Exceptional attention to detail, time management, and organizational skills., • Positive, proactive mindset with the ability to prioritize tasks, remain flexible, and meet tight deadlines., • Ability on daily basis to lift up to 50 pounds., • Ability to transport materials over 50 lbs. via material handling equipment, • Ability to frequently stand, walk, reach, stoop, kneel, or crouch., • Standard visual acuity (close/distance vision, color perception, depth perception, and focus adjustment). TECHNICAL & FUNCTIONAL SKILLS • Fluency in written and spoken English., • Basic math and computer skills; familiarity with Microsoft Office Suite and Oracle highly preferred., • Understanding of industry products and services is a plus. EDUCATION and/or EXPERIENCE • High School diploma or equivalent, • 1- 2 years of relevant warehouse/inventory experience preferred., • Previous experience and/or a valid permit for forklift operation preferred. CERTIFICATIONS & TRAINING • Must obtain Forklift Certification upon hire., • Hazardous Material Handling Training (e.g., HAZWOPER and RCRA) may be required. WORK SCHEDULE & ENVIRONMENT • Schedule: Flexible availability required, including occasional overtime., • Work Environment: Exposure to moving mechanical parts, occasional fumes/airborne particles, and varying weather conditions. Noise level is generally moderate. PHYSICAL REQUIREMENTS: While performing the duties of this job, the employee is occasionally required to stand; walk; sit; handle, reach; climb or balance; stoop, kneel, or crouch. The employee must have the ability to lift and move up to 50 pounds daily. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Spectrum Chemical Mfg. Corp. is an Equal Opportunity Employer. We value diversity and do not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status, or any other characteristic protected by applicable federal, state, or local law.

Shift5 is the observability platform for onboard operational technology (OT). We’re a rapidly growing scale-up that specializes in cybersecurity, predictive maintenance, and compliance for OT systems across defense, aerospace, and rail. We are a collaborative, passionate, and driven cadre of dynamic, multidisciplinary experts focused on helping our customers’ fleets run smarter and safer by accessing and democratizing the volumes of onboard OT data generated by transportation, freight fleets, defense fleets, and other critical infrastructure. Come join us. Shift5 is seeking a Systems Engineer to join our team. In this role, you will be the bridge between our engineering teams and our real-world deployments. You will be responsible for overseeing how our system integrates into various DoW platforms, ensuring that all our subsystems—from embedded software, hardware, and cabling to visualization applications, networking schemes, and cloud environments—meet rigorous compliance and customer requirements. This role is hands-on and execution-oriented, focusing on systems engineering execution across one or more programs, including requirements management, system architecture, technical baseline control, and the delivery of formal systems artifacts (CDRLs/SDRLs) in support of U.S. Department of War (DoW) programs. This position is based out of our headquarters in Rosslyn, VA, but is open to remote candidates based out of San Diego, CA, Colorado Springs, CO, Fort Hood, TX, or Ogden, UT, and requires up to 30% travel to support customer site integrations and testing. • Platform Integration & Technical Execution: Define and design the integration of Shift5 software and hardware into customer platforms, including data interfaces, execution environments, OS-level configuration, network topology (TCP/IP, tactical radio/RF), encryption/key management, environmental qualification (MIL-STD), SWaP, cabling, and A-kit development. Identify and manage technical risks and dependencies. Requirements & Technical Baseline Management: Own and maintain system-level technical baselines across assigned programs. Oversee tracking, testing, and verification of compliance and customer requirements. Develop, decompose, and manage requirements documents (SRDs, SRSs, ICDs) and evaluate design updates for downstream program impact. CDRL & Technical Artifact Development: Lead the development, review, and delivery of formal systems engineering and Contract Data Requirements List (CDRL) artifacts for government acquisition programs, including V&V Plans, System Architecture/Design Documents, Configuration Management artifacts, and Technical Manuals. System Architecture & Design: Lead end-to-end, cross-discipline technical execution across software, platform, cyber, data science, and integration teams. Serve as the technical authority for system-level decisions across hardware, software, network, and platform interfaces. Verification, Validation & Test: Define system-level verification strategies, acceptance criteria, and testing execution. Perform system-level analyses including latency, throughput, network bandwidth allocation, platform stability, system safety, and fault tolerance (FMECA, Single-Point Failure). Program & Customer Engagement: Serve as a primary technical interface with customer engineering, PMOs, and certification authorities. Lead content development for formal technical reviews (SRR, PDR, CDR, TRRs) and define entry/exit criteria for milestone events. Mission-Critical Integration: You seamlessly bridge engineering teams and DoW platform deployments, ensuring complex hardware, software, and network subsystems meet strict airworthiness, safety, and compliance standards. Rigorous Baseline Control: You independently own and manage technical baselines, CDRL deliverables, and requirements traceability with zero friction across fast-moving defense acquisition programs. Cross-Disciplinary Technical Authority: You serve as a trusted technical lead across software, cyber, hardware, and platform teams, translating complex operational constraints into robust, scalable architecture designs. Customer & Program Execution: You build high-trust relationships with customer PMOs and engineering authorities, successfully navigating technical gates (PDR, CDR, TRR) to advance platform capabilities. Required: Education: Bachelor’s degree in Computer Science, Computer Engineering, Electrical Engineering, Mechanical Engineering, or a related technical field. Experience: 5+ years of experience in systems, integration, or software engineering, preferably within the aerospace, defense, or high-reliability electronics sectors. Government Acquisition Knowledge: Familiarity with common government contract documentation according to DIDs (SRD, SRS, IDD, ICD, SDD, CSA, etc.). Technical & Integration Skills: Strong understanding of configuration management, software/OS integration (Linux/Unix), network architectures (TCP/IP, routing, VLANs), radio/RF communications, encryption protocols, and basic hardware/cabling integration in safety-critical/airworthiness environments. Testing & Verification: Demonstrated experience with common system verification methods (Test, Inspection, Demonstration, Analysis), hardware-in-the-loop (HIL) lab environments, and software-in-the-loop setups. Security Clearance: Active Security Clearance. Soft Skills: Excellent written and verbal communication skills with the ability to coordinate across diverse engineering disciplines, project managers, and external government stakeholders. Preferred: Industry & Quality Standards: Familiarity with industry design standards such as DO-178 and DO-254. Quality Frameworks: Familiarity with quality standards such as AS9100 and ISO 9001. Base Salary: $143,000 - $156,000 Bonus program and equity in a fast-growing startup Competitive medical, dental, and vision coverage for employees and their families Health Savings Account with annual employer contributions Employer-paid Life and Disability Insurance Uncapped paid time off policy Flexible work & remote work policy Tax-deferred public transit benefits with Metro SmartBenefits (DC/MD/VA) We are committed to building an inclusive culture of belonging that embraces the diversity of our people and represents the communities in which we work and the customers we serve. We know the happiest and highest performing teams include people with diverse perspectives and ways of solving problems. We strive to attract and retain talent from all backgrounds and create workplaces where everyone feels empowered to bring their full, authentic selves to work. Shift5 is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sexual orientation, gender identify, national origin, disability, age, marital status, ancestry, projected veteran status, or any other protected group or class. _

Job DescriptionCompany Description Cornerstone Building Brands is a leading manufacturer of exterior building products for residential and low-rise non-residential buildings in North America. Headquartered in Cary, N.C., we serve residential and commercial customers across the new construction and Repair & Remodel (R&R) markets. Our market-leading portfolio of products spans vinyl windows, vinyl siding, stone veneer, metal roofing, metal wall systems and metal accessories. Cornerstone Building Brands’ broad, multi-channel distribution platform and expansive national footprint includes more than 18,800 team members at manufacturing, distribution and office locations throughout North America. Corporate stewardship and Environmental, Social and Governance (ESG) responsibility are embedded in our culture. We are committed to contributing positively to the communities where we live, work and play. For more information, visit us at cornerstonebuildingbrands.com. Job Description 3rd Shift Monday - Friday 11:00 P.M. - 7:30 A.M. Pay Rate: $20.00 - $23.00 Per Hour, plus $1 per hour shift differential Key Responsibilities • Machine Setup and Operation: Operators are responsible for configuring the extrusion machines according to production requirements. This involves calibrating the machine settings, loading raw materials, and monitoring the process to ensure it runs smoothly., • Maintenance and Troubleshooting: Routine maintenance is critical to prevent machine downtime. Operators are expected to perform regular checks, clean equipment, and carry out minor repairs. For more complex issues, they work alongside maintenance teams to resolve problems., • Quality Control: Ensuring the quality of the output is a crucial part of the operator’s role. They must inspect products to verify that they meet the specified standards and make necessary adjustments if there are deviations., • Safety and Compliance: Given the potential hazards associated with heavy machinery, adhering to safety protocols is essential. Operators must follow all safety guidelines to protect themselves and their colleagues from accidents. Qualifications Skills and Qualifications Needed A successful extrusion operator requires a blend of technical skills, mechanical aptitude, and attention to detail. While some companies may hire individuals with a high school diploma and provide on-the-job training, many prefer candidates with a technical diploma in industrial technology or mechanical engineering. Essential Skills • Mechanical Aptitude: A strong understanding of machinery and its components is fundamental. Operators must be able to troubleshoot and solve mechanical issues quickly., • Attention to Detail: Precision is key in ensuring that products meet exact specifications. Operators must consistently monitor the extrusion process and make fine adjustments as needed., • Problem-Solving: The ability to identify and address issues promptly is critical for maintaining production efficiency., • Communication: Operators often work in teams, so clear communication is necessary to ensure that production runs smoothly and issues are addressed collectively. Career Path and Professional Development Starting as an entry-level extrusion operator offers a gateway into a stable and potentially lucrative career. With experience and continued education, operators can advance to supervisory roles, quality control positions, or even specialized technical roles. Additional Information Site Location: 1 Silverline Dr. North Brunswick Township, NJ 08902 Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. You can also join one of our Employee Resource Groups which help support our commitment to providing a diverse and inclusive work environment. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. All your information will be kept confidential according to EEO guidelines. Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. Cornerstone Building Brands is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, or status as a protected veteran. You can find the Equal Employment Opportunity Poster here. You can also view Your Right to Work Poster here along with This Organizations Participation in E-Verify Poster here. If you'd like to view a copy of the company's affirmative action plan for protected veterans or individuals with disabilities or policy statement, please contact Human Resources at 281-897-7788 or HRCompliance@cornerstone-bb.com. If you have a disability and you believe that you need a reasonable accommodation in order to search for a job opening or to submit an online application, please contact Human Resources at 281-897-7788 or HRCompliance@cornerstone-bb.com. This email is used exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only emails received for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. All your information will be kept confidential according to EEO guidelines. California Consumer Privacy Act (CCPA) of 2018 Must be at least 18 years of age to apply. Note to External Recruiters Cornerstone Building Brands does not accept unsolicited resumes and will not pay fees for any candidate submissions that were not expressly authorized. Notice of Recruitment Fraud We have been made aware of multiple scams whereby unauthorized individuals are using Cornerstone Building Brand's name and logo to solicit potential job-seekers for employment. In some cases, job-seekers are being contacted directly, both by phone and e-mail. In other instances, these unauthorized individuals are placing advertisements for fake positions with both legitimate websites and fabricated ones. These individuals are typically promising high-paying jobs with the requirement that the job-seeker send money to pay for things such as visa applications or processing fees. Please be advised that Cornerstone Building Brands will never ask potential job-seekers for any sort of advance payment or bank account information as part of the recruiting or hiring process. Location North Brunswick Township, NJ, USA Shift 3rd Shift Position Type Permanent Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. Cornerstone Building Brands is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, or status as a protected veteran. You can find the Equal Employment Opportunity Poster here. You can also view Your Right to Work Poster here along with This Organizations Participation in E-Verify Poster here. If you'd like to view a copy of the company's affirmative action plan for protected veterans or individuals with disabilities or policy statement, please contact Human Resources at 281-897-7788 or HRCompliance@cornerstone-bb.com. If you have a disability and you believe that you need a reasonable accommodation in order to search for a job opening or to submit an online application, please contact Human Resources at 281-897-7788 or HRCompliance@cornerstone-bb.com. This email is used exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only emails received for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. All your information will be kept confidential according to EEO guidelines. California Consumer Privacy Act (CCPA) of 2018 Must be at least 18 years of age to apply. Note to External Recruiters Cornerstone Building Brands does not accept unsolicited resumes and will not pay fees for any candidate submissions that were not expressly authorized. Notice of Recruitment Fraud We have been made aware of multiple scams whereby unauthorized individuals are using Cornerstone Building Brand's name and logo to solicit potential job-seekers for employment. In some cases, job-seekers are being contacted directly, both by phone and e-mail. In other instances, these unauthorized individuals are placing advertisements for fake positions with both legitimate websites and fabricated ones. These individuals are typically promising high-paying jobs with the requirement that the job-seeker send money to pay for things such as visa applications or processing fees. Please be advised that Cornerstone Building Brands will never ask potential job-seekers for any sort of advance payment or bank account information as part of the recruiting or hiring process.

Job Description Job Description Date 10/2025 Location 22 Van Dyke Avenue, New Brunswick NJ 08901 / 1300 Airport Road, North Brunswick NJ 08902 Title Operator, Dispensing Department Dispensing Reports to Manager, Dispensing FLSA (Exempt or Non-Exempt) Non-Exempt Role Overview The Dispensing Operator will perform all functions related to dispensing of material, receipt of goods, put-away material into warehouse aisles, pull out material per Batch card/Pick ticket, put back to same location from where it was pulled for batches, manual order processing, order auditing, shipment preparation, pallet building, transferring material from wood to plastic pallets, and cycle counting inventory. All functions may require the use of powered industrial trucks, Syspro or RF as needed. Will need to work in temperature-controlled areas. Areas of Responsibility Level 1: Dispensing Operator Overview: This is a training-level role for individuals with limited or no prior experience in pharmaceutical dispensing. Works under close supervision while learning company SOPs, GMP standards, and equipment operations. Key Responsibilities: • Assist in pulling and weighing raw materials under supervision., • Learn to read and interpret batch cards and pick slips., • Calibrate scales before use., • Cleans room after batch is complete, • Ensures safety and quality standards are consistently followed., • Maintain basic cleanliness of work area and equipment., • Support warehouse duties such as material receipt and basic inventory handling., • Follow safety procedures and learn PPE protocols., • Operate pallet jacks or assist with forklift activities (if certified). Level 2: Dispensing Operator Overview: This level is for operators with hands-on experience in pharmaceutical or supplement dispensing. Operators are responsible for completing batch-related activities with minimal supervision and maintaining documentation compliance. Key Responsibilities: • Dispense raw materials independently per batch cards., • Reviews batch card. Determine material to be used in the batch. Pull out material per requirement and enter in logbooks., • Performs requests received from other departments such as R&D, Production, QA or Purchasing etc., • Cleans room after batch is complete, • Ensures safety and quality standards are consistently followed., • Weigh materials accurately and calibrate scales before use., • Use Syspro or RF systems for inventory control., • Handle, put-away, return, and transfer of goods between warehouse locations., • Perform manual order processing, auditing, and preparation for shipments., • Maintain gowning and hygiene protocols in controlled environments., • Ensure accurate documentation in logs and batch records. Level 3: Dispensing Operator Overview: A highly experienced operator who may act as a team lead or trainer. Oversees batch dispensing activities, ensures compliance, and supports continuous improvement initiatives. Key Responsibilities: • Lead batch dispensing operations; verify materials and documentation., • Train and mentor entry and intermediate-level operators., • Collaborate with cross-functional teams (QA, R&D, Production)., • Reviews batch card. Determine material to be used in the batch. Pull out material per requirement and enter in logbooks., • Performs requests received from other departments such as R&D, Production, QA or Purchasing etc., • Cleans room after batch is complete, • Ensures safety and quality standards are consistently followed., • Conduct cycle counts and helps manage inventory accuracy., • Troubleshoot equipment or material issues; escalate when necessary., • Lead compliance audits for dispensing areas., • Support continuous improvement, safety, and 5S initiatives. Physical & Environmental Requirements (All Levels): • Able to lift 55 lbs regularly; occasionally up to 75 lbs., • Stand/walk for 6+ hours per shift., • Work in temperature-controlled rooms with PPE (lab coat, gloves, face mask, respirator, etc.)., • Exposure to dust, noise, and cleaning agents. Bottom of Form Requirements Education & Qualification: Level 1: Dispensing Operator • High school diploma or GED., • 0–1 year of experience in manufacturing or warehouse setting., • Basic math and English reading skills., • Willingness to learn cGMP, OSHA, and SOPs. Level 2: Dispensing Operator • High school diploma or GED., • 2+ years of experience in a pharmaceutical production environment., • Forklift operation experience (certification preferred)., • Familiarity with cGMP and SOP documentation standards., • Attention to detail and ability to troubleshoot basic dispensing issues. Level 3: Dispensing Operator Requirements: • High school diploma or GED; technical certification a plus., • 4+ years of dispensing experience in a GMP-regulated and within a pharmaceutical production environment, • Strong understanding of regulatory compliance (FDA, GMP, OSHA)., • Proven ability to lead teams and communicate effectively., • Proficient in inventory software (Syspro or similar ERP systems)., • Additional experience in granulation, compression, or blending is a strong plus. Certifications, Licenses, Credentials: • Prior certification to operate a sit-down forklift is a plus. Skills & Ability • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards, etc., • Mechanically inclined to understand the inner workings of the equipment., • Demonstrates the ability to read and write basic English to be able to understand the industry-regulated instruction sheets., • Must have attention to detail. Physical Requirements (lifting, etc.): • Ability to lift up to 55 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift, • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment., • Must be able to wear all PPE including a lab coat, face mask, booties, gloves, safety glasses/goggles, and respirators. Work Environment (Office, Warehouse, temperature extremes, etc.): • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment 2nd shift: 3:00 PM - 11:15 PM

Summary: The Maintenance associate is responsible for all building maintenance related duties. This includes light troubleshooting and major repair work as needed. In addition, the Maintenance associate will be responsible for maintaining the electrical, plumbing and cleanup of the different departments within the building. Work Hours: Monday to Friday from 08:00 AM to 05:00 PM, 2 Saturday(s) a month from 08:00 AM to 12:00 PM Seniority Level: Entry Level Employment Type: Full-time Compensation: This hourly, non-exempt position pays from $22 to $25 per hour, with overtime compensated at 1.5 times the base rate. New hires usually earn between $55,000 and $71,700 annually, or more, depending on experience, overtime hours, and bonuses. To perform this job successfully, the individual must be able to complete the following essential duties and responsibilities: • Responsible for minor and major building maintenance repairs., • Perform plumbing repairs., • Perform carpentry and plastering., • Paint, remodel, and repair the flooring., • Complete installations and demolitions through the facility., • Responsible for general clean up., • Conduct the equipment checklist and preventative maintenance on equipment., • Perform additional duties as required and or requested. Additionally the candidate must meet the following Education and/or Experience requirements: • High School or GED education required., • 3-5 years of Maintenance experience., • Effective communication skills, • Troubleshooting abilities, • Must have previous maintenance experience., • Must be able to work in a team environment and/or with little supervision., • Electrical and plumbing experience as well as a technical certificate is a plus., • Forklift and warehouse experience preferred., • Knowledge of using computer or tablet a plus., • Bilingual in Spanish (Preferred)., • Ability to travel as required. This role has the following physical demands: • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • While performing the duties of this job, the employee is regularly required to use their hands to handle objects, tools, or controls; reach with their hands and arms; and communicate verbally. The employee frequently walks, stands and occasionally sits., • The employee must regularly lift, pull and move up to 50 pounds and occasionally up to 70 pounds. Specific vision abilities required by this job include close vision., • This is a safety-sensitive position. Benefits: MSI offers a comprehensive benefits package that includes: • Referral, Holiday, and Annual Bonuses, • Annual pay increases, • Paid Time Off, • Medical, Dental, and Vision Insurance, • Company-paid Short Term and Long Term disability, • Company-paid Life Insurance, • Tuition Reimbursement, • Traditional and Roth 401(k) plans with company matching contributions, • Charitable donation matching programs, • Free, company-sponsored 1-on-1 tutoring for children/dependents of MSI employees in grades k-12, including free tutoring for SAT and ACT tests About MSI: Founded in 1975, MSI is a leading supplier of , , and surfaces products in North America. Headquartered in Orange, California, MSI also maintains over 50 state-of-the-art showroom and distribution centers across the U.S. and Canada. MSI's product line includes an extensive offering of , , , , , , , , , , , and _ imported from over 36 countries on six continents. Over the years, MSI has been the recipient of many prestigious awards including: • Top 5 fastest growing companies - OC Business Journal, • Supplier Diversity Award - Home Depot, • #1 Flooring Distributor multiple years in a row - Floor Covering Weekly, • Top Workplaces Award winner multiple times - Top Workplaces, • MSI Founder named the Entrepreneur of the Year - Ernst and Young MSI is an equal opportunity employer that celebrates diversity and fosters inclusion and belonging for all employees. We provide a work environment that allows all employees to do their best work, free from all forms of discrimination. No employee or applicant will be discriminated against on the basis of race, ethnicity, age, sex, gender identity or expression, sexual orientation, citizenship status, military status, religion, disability status, or any other legally protected group. MSI provides reasonable accommodations for all employees and applicants. If you believe you require an accommodation, please speak with your recruiter or a member of our HR team.

Job Description Job Title: Technical Writer Location: South Plainfield, NJ Type: Contract To Hire Compensation: $25/hour Work Model: Onsite Hours: Monday through Friday (9AM to 5PM) Summary: We are seeking an entry-level Technical Writer to support the development and maintenance of technical documentation and Standard Operating Procedures (SOPs) within a manufacturing and cleanroom environment. This position will work closely with engineers and other technical personnel to organize, update, and prepare process documentation. Responsibilities: • Create, update, format, and maintain SOPs, process documentation, and other technical documents., • Work closely with engineers and technical staff to gather information and accurately document processes and procedures., • Review and work with technical documentation written in both English and Mandarin., • Organize and maintain electronic and physical documentation to ensure information is accurate and easily accessible., • Use Microsoft Word and Excel to prepare, revise, track, and maintain documents and related information., • Provide general documentation and administrative support to engineering and manufacturing teams as needed., • Work within cleanroom and manufacturing areas as necessary to observe processes and understand documentation requirements. Qualifications: • Bachelor's degree in Materials Science, Chemistry, Chemical Engineering, Physics, Engineering, or another related science or technical discipline required., • Fluency in Mandarin and English required., • Ability to lift up to 50lbs. (moving heavy documentation), • Strong written communication and organizational skills., • Proficiency with Microsoft Office, particularly Word and Excel., • Ability to understand technical information and translate it into clear, organized documentation., • Strong attention to detail and ability to manage multiple documents and priorities., • Previous technical writing, SOP, manufacturing, or semiconductor experience is a plus but not required System One, and its subsidiaries including Joulé and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. #M1 Ref: #562-Joule Staffing - Edison

Job DescriptionJob Title: Junior Machinist / CNC Operator (HAAS Lathe) Location: Parlin, NJ Type: Contract-to-Hire Compensation: $22 - $30 per hour Contractor Work Model: 100% onsite work is required Hours: Monday - Friday, 8:00 AM - 4:30 PM Start Your Career in CNC Machining & Manufacturing Are you a recent high school graduate, trade school student, or early-career machinist looking to grow your hands-on manufacturing skills? We are hiring a motivated Junior Machinist / CNC Operator to join our growing industrial manufacturing team in Parlin, NJ. This is an excellent opportunity for someone with 1–2 years of CNC, shop, vocational, or mechanical experience who wants real-world training, stable hours, and long-term career growth in machining and manufacturing. We manufacture and distribute custom industrial conveyor belts, rollers, shafts, bearings, motors, and mechanical replacement components for customers across North America. No advanced programming experience required — we’re looking for someone eager to learn, dependable, and mechanically inclined. What You’ll Learn & Do: CNC Machining & Shop Work • Set up and operate a HAAS CNC Lathe (basic Y-axis work), • Machine custom 1-inch roller shafts to customer specifications, • Read blueprints, diagrams, and measurements, • Perform basic machine maintenance and preventative maintenance checks, • Assist with prototype and custom part production, • Maintain accurate inventory and update computerized systems Manufacturing & Production, • Help manufacture custom conveyor belts and industrial components, • Measure, cut, trim, and assemble rubber materials and mechanical parts, • Use hand tools and power tools including drills, tape measures, screwdrivers, and saws, • Verify measurements and ensure quality standards are met Warehouse & Shipping, • Prepare and package customer orders for shipment, • Use shipping software such as FedEx Ship Manager and UPS systems, • Load and unload trucks using pallet jacks and forklifts, • RF scan products and update inventory systems, • Maintain a clean, organized, and safety-focused workspace, • Forklift training is provided. What We’re Looking For Ideal for:, • Recent high school graduates, • Vocational/technical school graduates, • Trade school students, • Entry-level machinists, • Candidates with 1–2 years of shop, CNC, warehouse, or mechanical experience Requirements, • High school diploma or equivalent, • Valid New Jersey driver’s license, • At least 1 year of CNC, machining, shop class, or related mechanical experience, • Basic understanding of measurements and blueprints, • Willingness to learn and work both in the machine shop and warehouse, • Reliable, motivated, and team-oriented attitude Why Join Us?, • Stable full-time weekday schedule, • Hands-on CNC and manufacturing experience, • Opportunity to grow into a long-term machinist career, • Small team environment with direct mentorship, • Training provided on forklifts and additional equipment, • Variety in daily work — machining, production, and shipping experience, • For immediate consideration, call or text Chad during business hours: 732-228-8980 #M1 Ref: #563-Joule Staffing - Toms River

Job DescriptionCompany Description Global supply chain management is what we do, and at the heart of Expeditors you will find professionalism, leadership, and a friendly environment, all of which foster an innovative, customer service-based approach to logistics. Expeditors is a global logistics company headquartered in Seattle, Washington. As a Fortune 500 company, we employ over 19,000 trained professionals in a worldwide network of over 350+ locations across six continents. Expeditors satisfies the increasingly sophisticated needs of international trade through customized solutions and seamless, integrated information systems. Our Mission is to recruit, train, and retain the very best logistics and technical experts the world over. We love to promote from within - more than 50 percent of our employees have been at Expeditors for five years or more. Our high retention rate is influenced by a unique compensation program for positions that are more than just jobs - they're chances to grow, do what you love and build a career with us! Job Description Duties and Responsibilities • Ensure smooth and timely customs process flow, • Ensure accurate and timely data entry into our operational system, • Track and Trace Custom files and reporting, • Ensure accurate and timely client billing, • Understand all the elements of the import and export customs Desk Level Operating Procedure and correctly interpret this information to fulfill our customer´s instructions and expectations., • Transfer customs declaration information from documents, or other sources into the customs entry system to allow for the build of a valid customs declaration, • Assist with verification of customs declaration information and the submission of such to the customs authority, • Ensure compliance at all times to regulations Support the department in the following areas: • Daily execution of workflow and department metrics., • Build and maintain strong relationships with customers and governmental Customs organizations., • Timely completion of items on learning plan(s) and Personal development plan. Systems: • Embrace and utilize productivity tools, • Be open to implementing new system changes and enhancements., • Be involved and suggest system/process improvements. Culture: • Consistently display and promote the company’s 10 cultural attributes: Appearance, Attitude, Confidence, Curiosity, Excellence, Integrity, Pride, Resolute, Sense of Humor, and Visionary. Qualifications • Bachelor's degree, • Professional oral and written communication skills in English, • Demonstrate exceptional customer service skills, • Organizational skills, • Needs analysis skills, • Problem solving skills, • Strong Microsoft Office skills (Word, Excel etc.) Additional Information Expeditors offers excellent benefits: • Paid Vacation, Holiday, Sick Time, • Health Plan: Medical, • Life Insurance, • Employee Stock Purchase Plan, • Training and Personnel Development Program, • Growth opportunities within the company, • Employee Referral Program Bonus, • Salary range: $48,000 - $51,000

Job DescriptionDescription: Setup Configuration Analyst We are looking for a skilled and highly motivated person to join our Setup/Updates team as an entry level Setup Configuration Analyst. The primary responsibility of this role is to remotely perform scheduled setup of hardware and software for customers. As a Setup Configuration Analyst, you will work closely with our implementation/project management team as well as with customers to complete the assigned tasks. The ideal candidate should be detailed orientated, be able to work independently, possess the ability to work effectively with co-workers and customers, and exhibit outstanding customer service skills. RESPONSIBILITIES: - Remotely perform setup of POS system hardware and software components. - Complete assigned tasks accurately and in a timely manner. - Provide status updates of assigned tasks to customer and project manager. - Escalate issues to the technical support team, project manager, development team and department manager as necessary. - Create/update department documentation, provide feedback to department manager. SKILL REQUIREMENTS: - Bachelor’s degree in Computer Science, Information Technology, or 5+ years of equivalent experience - SQL programming and relational database knowledge - Basic networking and client/server system architecture knowledge - Strong oral and written communication skills - Flexibility to work outside normal hours as needed - Experience with Microsoft SQL Server, Windows Server, Apache Tomcat, and Java is preferred - Experience with using retail software or providing technical support in small/medium business applications is a plus Flexible Work Place/Hours Benefits include Medical, 401(K), Vacation/Sick leave, Life Insurance, FSA. Optional Dental and Eye Care Coverage Available Requirements: SKILL REQUIREMENTS: - Bachelor’s degree in Computer Science, Information Technology, or 5+ years of equivalent experience - SQL programming and relational database knowledge - Basic networking and client/server system architecture knowledge - Strong oral and written communication skills - Flexibility to work outside normal hours as needed - Experience with Microsoft SQL Server, Windows Server, Apache Tomcat, and Java is preferred - Experience with using retail software or providing technical support in small/medium business applications is a plus

Job Description Tri-State Energy (TSE) is an energy efficiency consulting and implementation contracting firm with a 40-year history in customer service and energy cost saving delivery. Regionally, TSE delivers Direct Install Programs, Engineered Solutions Programs, Energy Savings Improvement Programs, and Engineering Services for Municipal, Commercial and Industrial Clients. TSE is consistently recognized and awarded for being a small business champion that marries innovative technology with small company personalization and service. We are growing and looking to hire dedicated, industry-qualified candidates at all experience levels to grow with our company. Job Description We are seeking a dedicated and detail-oriented Mechanical Engineer to join our team in Woodbridge, New Jersey. The ideal candidate will be responsible for conducting energy audits, data collection and entry, feasibility studies, engineering assessments, and providing program-related support activities. This crucial role also involves conducting on-site inspections, design support, reviewing technical documents, and participating in construction management. The Engineer will play a vital role in ensuring our projects realize their energy savings and meet all regulatory standards. Job Responsibilities • Perform onsite inspections, including detailed data collection and performance testing., • Prepare site investigation, preliminary design, and due diligence reports, including review of ordinances, utility service research, outside agency regulations, and onsite visits to establish comprehensive development guidelines., • Provide thorough education to end users regarding energy efficiency; field and answer related questions., • As a subject matter expert, be responsible for project coordination with the client, other consultants, contractors, and the project team to prepare a comprehensive site plan application., • Ensure technical aspects of work are performed following applicable regulations or project plans., • Investigate problems in construction or renovation projects., • Provide technical assistance to customers, contractors, and other stakeholders, including support with energy savings calculations and meeting program requirements., • Support and promote relationships with industry and solution partners to maximize project implementation, promote efficiency, and educate customers while sustaining a robust program pipeline., • Prepare written correspondence to outside agencies, clients, contractors, etc., • Perform site visits to verify the appropriate installation of recommended measures., • Monitor new products and technologies related to this industry for ongoing and future projects., • Stay informed about energy issues and industry trends through regular technical reading and participation in local and national professional organizations., • Provide thorough education to end users regarding energy efficiency, field and answer related questions., • Perform other duties as assigned. Qualifications • Bachelor's or master's degree in engineering (Mechanical, Energy or Electrical)., • Demonstrated interest in energy efficiency is must., • A minimum of 1 year of relevant engineering or fieldwork experience required; 2 to 5 years are preferred., • Must reside in New Jersey., • Demonstrated knowledge of Lighting and Lighting Controls, HVAC Equipment, Building Management System (BMS) and Building Envelope Components., • Demonstrated experience with energy codes and standards (IECC, ASHRAE, etc.) and Energy Star components., • Knowledge of ASHRAE level energy auditing., • Familiar with Mechanical Engineering design., • Must be able to lead and perform on-site and virtual audits and customer site visits in various environments, including commercial, industrial, school, and government facilities., • Strong project management skills with the ability to set priorities, collect and document project requirements, successfully handle multiple projects simultaneously, and meet deadlines in a fast-paced environment., • Ability to maintain and operate personal and/or company vehicles with a valid driver’s license., • Must be willing and able to travel within the tri-state area; some overnight travel may be required., • Strong customer service capability focusing on proactively identifying customer needs and managing customer expectations., • Excellent written and verbal communication skills., • Self-starter who can work independently or within a team environment., • Exceptional organizational, time-management, and planning skills. Professional Skills • Familiar with the use of AutoCAD to assist in the production of site plan drawings., • Knowledge of eQuest, EnergyPlus or Open Studio software is a plus., • Proficient in using Microsoft 365 including Word, Excel, Outlook, and Project and other management software. AutoCAD full proficiency is required. Physical Abilities The physical demands described here represent those that an employee must meet to perform the essential functions of this job successfully. • While performing the duties of this job, the employee is occasionally required to stand; sit, walk, climb, balance, stoop, kneel, crouch or crawl; use hands to finger, grasp, or feel objects; reach with hands and arms; push or pull; talk and hear; use repetitive motions., • The employee is frequently required to lift and/or move up to 20 pounds and occasionally lift and/or move up to 25 pounds., • The employee must have visual acuity to perform activities such as preparing and analyzing data and figures, transcribing, viewing a computer terminal, and extensive reading and visual inspections of site plans. Work Environment While performing the duties of this job, the employee is subject to the following work environment: • The employee is subject to both inside and outside environmental conditions., • The employee is subject to hazards such as proximity to moving mechanical parts, moving vehicles, and electrical current. Equal Employment Opportunity (EEO) TSE is an equal-opportunity employer committed to diversity and inclusion in the workplace. TSE prohibits discrimination and harassment of any kind based on age, race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, age, marital status, gender, gender identity or expression, veteran status, or any other protected characteristic as outlined by federal, state, or local laws. TSE is a drug-free workplace. Why work with us? • Medical, vision, dental insurance and more, including 401(k) and employer match.

Job Description Tri-State Energy (TSE) is an energy efficiency consulting and implementation contracting firm with a 40-year history in customer service and energy cost saving delivery. TSE is a Minority Based Enterprise (MBE) for multiple states and has a major focus on providing support for DEI and Diversity initiatives. Regionally, TSE delivers Direct Install Programs, Engineered Solutions Programs, Energy Savings Improvement Programs, and Engineering Services for Municipal, Commercial and Industrial Clients. TSE is consistently recognized and awarded for being a small business champion that marries innovative technology with small company personalization and service. We are growing and looking to hire dedicated, industry-qualified candidates at all experience levels to grow with our company. Job Description We are seeking a dedicated and detail-oriented Energy Engineer to join our team in Woodbridge, New Jersey. The ideal candidate will be responsible for conducting energy audits, data collection and entry, feasibility studies, engineering assessments, and providing program-related support activities. This crucial role also involves conducting on-site inspections, design support, reviewing technical documents, and participating in construction management. The Energy Engineer will play a vital role in ensuring our projects realize their energy savings and meet all regulatory standards. Job Responsibilities • Perform onsite inspections, including detailed data collection and performance testing., • Prepare site investigation, preliminary design, and due diligence reports, including review of ordinances, utility service research, outside agency regulations, and onsite visits to establish comprehensive development guidelines., • Provide thorough education to end users regarding energy efficiency; field and answer related questions., • As a subject matter expert, be responsible for project coordination with the client, other consultants, contractors, and the project team to prepare a comprehensive site plan application., • Ensure technical aspects of work are performed following applicable regulations or project plans., • Investigate problems in construction or renovation projects., • Provide technical assistance to customers, contractors, and other stakeholders, including support with energy savings calculations and meeting program requirements., • Support and promote relationships with industry and solution partners to maximize project implementation, promote efficiency, and educate customers while sustaining a robust program pipeline., • Prepare written correspondence to outside agencies, clients, contractors, etc., • Perform site visits to verify the appropriate installation of recommended measures., • Monitor new products and technologies related to this industry for ongoing and future projects., • Stay informed about energy issues and industry trends through regular technical reading and participation in local and national professional organizations., • Provide thorough education to end users regarding energy efficiency, field and answer related questions., • Perform other duties as assigned. Qualifications Bachelor’s or master’s in engineering (Mechanical, Electrical, Energy). Other engineering disciplines will be considered. • Demonstrated interest in energy efficiency is must., • A minimum of 1 year of relevant engineering or fieldwork experience required; 2 to 5 years are preferred., • Must reside in New Jersey., • Demonstrated knowledge of Lighting and Lighting Controls, HVAC Equipment, Building Management System (BMS) and Building Envelope Components., • Demonstrated experience with energy codes and standards (IECC, ASHRAE, etc.) and Energy Star components., • Knowledge of ASHRAE level energy auditing, • Must be able to lead and perform on-site and virtual audits and customer site visits in various environments, including commercial, industrial, school, and government facilities., • Strong project management skills with the ability to set priorities, collect and document project requirements, successfully handle multiple projects simultaneously, and meet deadlines in a fast-paced environment., • Ability to maintain and operate personal and/or company vehicles with a valid driver’s license., • Must be willing and able to travel within the tri-state area; some overnight travel may be required., • Strong customer service capability focusing on proactively identifying customer needs and managing customer expectations., • Excellent written and verbal communication skills., • Self-starter who can work independently or within a team environment., • Exceptional organizational, time-management, and planning skills. Professional Skills • Familiar with the use of AutoCAD to assist in the production of site plan drawings., • Knowledge of eQuest, EnergyPlus or Open Studio software is a plus., • Proficient in using Microsoft 365 including Word, Excel, Outlook, and Project and other management software. AutoCAD full proficiency is required. Physical Abilities The physical demands described here represent those that an employee must meet to perform the essential functions of this job successfully. • While performing the duties of this job, the employee is occasionally required to stand; sit, walk, climb, balance, stoop, kneel, crouch or crawl; use hands to finger, grasp, or feel objects; reach with hands and arms; push or pull; talk and hear; use repetitive motions., • The employee is frequently required to lift and/or move up to 20 pounds and occasionally lift and/or move up to 25 pounds., • The employee must have visual acuity to perform activities such as preparing and analyzing data and figures, transcribing, viewing a computer terminal, and extensive reading and visual inspections of site plans. Work Environment While performing the duties of this job, the employee is subject to the following work environment: • The employee is subject to both inside and outside environmental conditions., • The employee is subject to hazards such as proximity to moving mechanical parts, moving vehicles, and electrical current. Equal Employment Opportunity (EEO) TSE is an equal-opportunity employer committed to diversity and inclusion in the workplace. TSE prohibits discrimination and harassment of any kind based on age, race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, age, marital status, gender, gender identity or expression, veteran status, or any other protected characteristic as outlined by federal, state, or local laws. TSE is a drug-free workplace. Screening TSE makes offers of employment contingent upon (1) successful completion of a routine background investigation and reference check, (2) drug testing, and (3) Act 34 Child Abuse clearance. Why work with us? • Medical, vision, dental insurance and more, including 401(k) and employer match.

Job Description Job Description Date 06/2020 Location 1200 Airport Road, North Brunswick NJ Title Chemist, Quality Control 1, 2 & 3 Department Quality Control Reports to Manager, Analytical, R&D, & Method Validation FLSA (Exempt or Non-Exempt Non- Exempt Role Overview The Chemist, QC role is responsible for performing analytical testing, laboratory investigations, data review, and quality control activities to ensure the identity, strength, purity, and quality of raw materials, active pharmaceutical ingredients (APIs), in-process materials, finished products, and stability samples. The role operates within an FDA-regulated laboratory environment and supports compliance with cGMP, Good Documentation Practices, company procedures, and applicable regulatory requirements. The Chemist performs chemical and physical analysis using a variety of analytical techniques and laboratory instrumentation, including HPLC/UPLC, GC, ICP-MS, UV-Visible Spectrophotometer, FTIR, Auto Titrators, Dissolution Apparatus, Karl Fischer Titrators, Bulk Density Testing, Potentiometers, and other QC laboratory equipment. The role is responsible for accurate testing, documentation, instrument operation, troubleshooting, and communication of analytical results to support product quality and timely release. Throughout all levels, the Chemist is expected to demonstrate strong analytical skills, attention to detail, problem-solving ability, and commitment to quality and compliance. The career progression moves from executing established laboratory procedures at the entry level to independently managing complex analytical challenges, supporting method validation/verification, compendial compliance, and providing technical leadership within the QC organization. Areas of Responsibility Chemist, QC 1: The Chemist, QC I is an entry-level laboratory professional responsible for performing routine chemical and physical analysis of raw materials, in-process samples, finished products, and stability samples according to established official and in-house test procedures. The Chemist evaluates samples for identity, strength, purity, and quality attributes while developing proficiency in analytical techniques, laboratory instrumentation, and GMP laboratory practices. The Chemist, QC I works under the guidance of experienced chemists and supervisors to ensure testing is performed accurately, safely, and in compliance with company procedures, cGMP, and regulatory requirements. Key Responsibilities • Perform routine sampling, chemical testing, physical testing, and assays of raw materials, active pharmaceutical ingredients (APIs), in-process materials, finished products, and stability samples in an FDA-regulated laboratory environment., • Perform analytical testing using wet chemistry techniques and laboratory instrumentation, including:, • HPLC/UPLC, • GC, • IR/FTIR, • UV-Visible Spectrophotometer, • Auto Titrator, • Dissolution Apparatus, • Karl Fischer (KF), • Potentiometer, • Bulk Density testing, • Prepare reagents, standards, solutions, and samples according to approved procedures., • Perform assigned testing activities and accurately document analytical results., • Support troubleshooting and testing of specific batches to assist with identification of potential causes of out-of-specification (OOS) results., • Assist with customer complaint investigations by providing analytical test results., • Prepare and review QC documentation, including test records, SOPs, test procedures, and protocols as assigned., • Perform routine instrument maintenance and calibration activities under supervision and training., • Maintain laboratory organization, housekeeping, safety, and chemical waste compliance., • Follow cGMP, Good Documentation Practices, and company quality requirements., • Complete approximately:, • 95% analytical testing activities, • 5% documentation and record review activities., • Work extended hours or occasional weekends as required., • Perform other duties as assigned. Chemist, QC 2: The Chemist, QC II is an experienced laboratory professional responsible for performing routine and complex analytical testing with increased independence. This role applies technical knowledge to troubleshoot analytical issues, support investigations, review data, maintain laboratory equipment, and provide technical support to QC operations. Chemist, QC II demonstrates proficiency with analytical instrumentation and applies knowledge of cGMP, and laboratory procedures to ensure accurate and timely testing. Key Responsibilities Includes all Chemist, QC I responsibilities, with increased ownership and accountability: • Independently perform chemical, physical, and instrumental testing of raw materials, APIs, in-process materials, finished products, and stability samples., • Perform complex analytical testing using QC instrumentation including:, • HPLC/UPLC, • GC, • IR/FTIR, • UV-Visible Spectrophotometer, • Dissolution, • Karl Fischer, • Auto Titrator, • Potentiometer, • Other QC laboratory equipment., • Troubleshoot analytical testing issues and instrument-related challenges., • Support investigations related to:, • Out-of-specification (OOS) results, • Atypical results, • Customer complaints, • Product quality concerns, • Analyze test results and provide technical input to assist with root cause determination and corrective actions., • Review analytical data and QC documentation for accuracy and completeness., • Prepare and revise SOPs, test procedures, protocols, and laboratory documentation., • Perform instrument maintenance, calibration, and troubleshooting activities with limited supervision., • Support continuous improvement activities within the QC laboratory., • Provide technical support and guidance to QC Chemist I personnel., • Ensure compliance with customer specifications, company requirements, and federal, state, and local regulations., • Maintain laboratory safety, compliance, and documentation standards., • Work extended hours or weekends as needed. Chemist, QC III : The Chemist, QC III is a senior-level technical contributor responsible for both routine and advanced analytical testing, complex troubleshooting, laboratory investigations, and technical leadership within the QC organization. This role serves as a subject matter expert for analytical methods, instrumentation, and laboratory practices while supporting compliance, continuous improvement, and cross-functional initiatives. Key Responsibilities Includes all Chemist, QC II responsibilities, with increased technical leadership: • Serve as a technical resource for analytical testing, instrumentation, and laboratory troubleshooting., • Perform and oversee complex analytical testing activities for raw materials, APIs, in-process materials, finished products, and stability samples., • Lead troubleshooting activities for specific batches and analytical issues to determine root cause and recommend corrective actions., • Lead or support complex investigations related to:, • OOS results, • Deviations, • Customer complaints, • Product quality issues., • Review and provide technical approval of analytical data and laboratory documentation., • Support analytical method validation, verification, transfer, and optimization activities., • Develop, review, and improve SOPs, test procedures, protocols, and technical reports., • Provide technical guidance and mentoring to QC Chemist I and QC Chemist II team members., • Support internal audits, customer audits, and regulatory inspections.

Job Description:\n\n Experience Without Limits\n Come shape the future of brand experience.\n At Jack Morton, we design and build head-turning, smile-inducing, impact-driving brand experiences that redefine what experiential marketing can achieve. We help our clients unlock the full value of experiences by turning bold ideas into meaningful connections.\n That takes a team that's bold, curious, and acts as one. We build on each other's ideas, challenge conventions, and show up for one another every day. Here, you'll do your best work, grow quickly, and partner across clients, disciplines, and global teams to bring new ideas to life.\n This is a place where curiosity drives what's next, boldness raises the bar, and every win is shared. Where ownership is expected, egos are left at the door, and the work reflects the passion and talent of the people behind it.\n Experience without limits—in your work, your growth, and your impact.\n\nSUMMARY\n \nThe Senior Event Manager, Healthcare and Pharma plans and executes meetings and special events associated with congresses and conventions for Impact XM clients in the Healthcare and Pharmaceutical industries. The following duties will be performed or through subordinate supervisors and planners.\n \nEssential Duties and Responsibilities include but are not limited to the following. Other duties may be assigned. The duties and responsibilities as outlined in this Job Description may be changed from time to time by the Corporation, as it deems necessary, without further notice to the Employee.\n \nServes as liaison between suppliers and organization staff in arranging meetings, events, training sessions, and conference and trade show hospitality suites.\n \nResearch, evaluates, negotiates with, establishes, and maintains relationships with preferred vendors.\n \nDevelops proposals, estimated cost models, budgets, tracks budget statistics, and prepares management reports for individual events, as well as monthly tracking of annual program spend.\n \nMaintains budget and budget changes throughout pre-planning, meeting execution and post-show reconciliation.\n \nLeads selection of meeting/event site process.\n \nNegotiates hotel, lodging and meeting space rental contracts to meet approved budget.\n \nOversees meeting schedules, materials and services for multiple meetings/convention needs for recurring client.\n \nCoordinates registration and payment procedures, promotional advertising and mailings, invitations, and corporate sponsorship activities.\n \nConsults with representatives of client group or organization, as well as Impact XM Convention and Meeting Planners to plan meeting and/or convention details such as number of persons expected, housing requirements, meeting space desired, food service schedule and payment arrangements.\n \nCommunicates with Convention Management, Housing Bureaus, Hotels and other entities to secure and manage multi-room "housing blocks" of sleeping rooms and registration/badge needs, as well as meeting spaces and support services (Food & Beverage, AV, etc.) during convention activities.\n \nPlans the scope of the individual conference activities, including time(s), location(s), and cost(s) tasks including:\n \n\n Research compliant venue options and negotiates/secures contracts\n Prepare SOW, request Purchase Orders for approved items\n Prepare formal estimates\n Coordinates and Secures Audio Visual\n Create and send event marketing communications via email, Cvent\n Send and track correspondence with attendees, speakers, sponsors, exhibitors\n Coordinate of event publications and syllabus materials\n Prepare BEO information with event venues\n Coordinate travel, lodging, and expenses for participants\n Create and manage budgets\n Work directly with registrants on problems and inquires\n Staff events and manage onsite event registration; includes travel to selected meetings\n Data entry and daily administrative functions\n Track invoices and receipts as requested; track expenses for event budget reconciliation\n Ensures client guidelines and business rules are followed\n Ability to coordinate multiple meetings simultaneously\n Ability to meet established deadlines\n Coordination of High-profile congress meetings\n\n \nPharma Know-How:\n\n Experienced in delivering Congresses, Investigator Meetings & Advisory Boards.\n Strong knowledge of industry codes of conduct, such as the PhRMA Code in the United States or EFPIA Code in Europe\n Understand the implications of anti-bribery laws when interacting with healthcare professionals, vendors, and third-party intermediaries.\n Strong knowledge of internal healthcare compliance programs and policies.\n A commitment to staying informed about changes and updates in pharmaceutical regulations, codes of conduct, and industry best practices.\n Strong knowledge of the meal and hospitality limits set by local regulatory bodies in different countries.\n Strong knowledge of regulations and guidelines outlining acceptable hotel accommodation expenses for healthcare professionals in different countries.\n\n \nNotifies Client representatives, as well as internal department personnel of arrangements made, and of upcoming key dates.\n \nReports on attendee and housing status to client on regular basis.\n \nManages changes to client requests, requesting changes in plan as needed.\n \nOversees communications to attendees, in the form of electronic (email) communications, as well as Convention Information documents (for attendees) and Final Housing and Registration Reports (for clients.)\nOversees on-site delivery of housing, registration, badging delivery for client group at a convention.\n \nOversees and manages payment process for housing blocks, including creation of Master Billing with hotels, payments using Impact credit cards and/or working with client for direct client payment.\n \nTravels on site as needed.\n \nActs as liaison between the meeting facility and the planners who work for associations, businesses, and governments.\n \nInspects rooms and displays for conformance to needs and desires of group.\n \nArranges publicity, special functions, adjusts complaints, and performs other duties to promote goodwill.\n \nRecords financial information in Impact XM systems in a clear and timely manner.\n \nReviews/reconciles event bills and credit card statements; approves payment, assists with final client invoice reconciliation\n \nSupervisory Responsibilities \n\n Input of timekeeper on a weekly basis\n Develop, mentor and coach all direct reports ensuring periodic meetings to discuss progress and review development plans.\n Provide consistent leadership, motivation and direction to all team members. This includes weekly F2F meetings and having a presence in the office.\n Conduct and execute weekly 1-1 meetings with line reports.\n Responsible for line reports personal development plans, providing measurable goals and objectives. This includes honest feedback and guidance on where improvements can be made.\n Manage and oversee the team's adherence to processes\n Work with the governance team to regularly improve and update processes\n Helping to manage line reports capacity and suggest solutions for resource requirements to Director for approval.\n Provisional approval for holidays and lieu days for all direct reports, seeking final approval via Director\n\n \nQualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. (Canadian Positions: Accommodations will be made, up to undue hardship, for employees that advise accommodation is required pursuant to the prohibited grounds of the human rights legislation.)\n \n \nEducation and/or Experience \n \nBachelor's degree (B.A. or B.S.) from four-year college or university; and 2+ years' similar experience successfully executing projects and programs and/or training; or equivalent combination of education and experience.\n \nProficiency with registration software programs (i.e. Cvent)\n \nExperience with Trade Shows, Convention and/or Congress planning, as well as Housing Bureaus is highly desirable.\n \nLanguage Skills \n \nAbility to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, proposals, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.\n \n \nMathematical Skills \n \nAbility to work with mathematical concepts such as probability and statistical inference. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.\n \nReasoning Ability \n \nAbility to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.\n \nComputer Skills \n \nTo perform this job successfully, an individual should have knowledge of Excel Spreadsheet software and Microsoft Office Word Processing software, Microsoft PowerPoint and Outlook.\n \n \nOther Skills and Abilities \n \nMust be passionate about working with people and be customer-centric.\n \nMust show good attention to detail.\n \nEffective communication skills are required: including the ability to make effective presentations; prepare written documentation including proposals, quotations and letters; maintain accurate and complete client and project files.\n \nExhibit the ability to multi-task, sell, and operate under severe time constraints and immovable deadlines. Good organization, detail and follow-up skills are required.\n \nExperience in the event marketing or a creative solutions-based agency.\nThrives in an entrepreneurial and independent environment.\nEmbodies flexibility, open-mindedness and receptivity.\nActively works out solutions.\nIdentifies something valuable in being part of a team and ability to effectively collaborate.\n \nMust be able to develop excellent rapport with existing and prospective clients.\n \nMust have a good "business sense".\n \nProficient using Microsoft office programs.\n \n \nPhysical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.\n \n \nWhile performing the duties of this Job, the employee is regularly required to sit and talk or hear. The employee is occasionally required to stand; walk; use hands to finger, handle, or feel and reach with hands and arms. The employee must regularly lift and /or move up to 10 pounds. Specific vision abilities required by this job include ability to adjust focus.\n \n \nWork Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. (Canadian Positions: Accommodations will be made, up to undue hardship, for employees that advise accommodation is required pursuant to a prohibited ground of the human rights legislation.)\n \n \nThe noise level in the work environment is usually moderate.\nBelow for recruiting team only:\nAs a(n) Job Title, include brief job summary (helps to insert industry/niche callouts here).\nWhat you'll be doing\nGreat work\n\n Insert responsibilities / deliverables\n\nIf you can do all that, you have what it takes. It might help if…\n\n Insert qualifications\n\nLast but not least, we believe in diversity, equity and inclusion.\nJack Morton is an equal opportunity employer; we strongly value diversity at our companies. We do not discriminate on race, religion, color, national origin, disability, sexual orientation, gender identity, gender expression, age, marital status, veteran status, or any other basis prohibited by law. \n#LI-XXX \n\n We make our careers website accessible to any and all users. If you need an accommodation to participate in the application process, please contact us at jobaccomodations@jackmorton.com. This email address is not for general employment inquiries or vendors; rather it is strictly for applicants who require special assistance accessing our employment website. Due to volume, messages sent to this email address that are not related to an accommodation cannot be answered.\n *JOB SCAM ALERT*\n We have recently become aware that individuals not associated with Jack Morton have fraudulently used our name – and the names of some of our employees – to solicit applications for fake jobs, to conduct fake job interviews and to make fake job offers. Any request to schedule an interview and any bona fide offer of employment will only come from an authorized representative of Jack Morton with an email address "@jackmorton.com" or "@jackmorton.co.uk" or "@impact-xm". We will never require an applicant to provide credit card or banking information to cover any supposed advance costs.\n If you have provided personal information in connection with a fake job offer or interview and you are concerned, we suggest that you take appropriate action.\n Jack Morton takes these activities very seriously and are taking appropriate steps to shut down this fraudulent activity.\n We urge you to be careful when sharing your personal information and to be aware of scams involving fake job postings and job offers.

Job Title: Accounts Receivable Analyst III - Hybrid Role Duration: 10 Months contract Location: Cranbury, NJ 08512 PAY RANGE: $30.00 - $33.00./Hrs. on w2 Description: Soft skills: Achieves Results: Stays focused on completing daily tasks accurately and on time. Operational Excellence: Maintains high standards of quality for all transactional work. Interacts Effectively: Communicates clearly and updates supervisors on task status and potential escalations. Reliability: Demonstrates consistency in handling repetitive, complex data sets with integrity. Technical skills: • SAP, • Invoice to Cash tool, • Bachelor's required JOB DESCRIPTION: Support the Invoice to Cash (I2C) department by executing daily operational tasks focused on accounts receivable and sales billing. The role provides essential technical and administrative support to ensure the financial integrity of our revenue. Working under the direction of the A/R Lead, the Analyst will assist in performing payment processing, resolving billing blocks, and ensuring the continuous flow of sales data into SAP and cloud-based solution for Invoice to Cash. The position requires strong attention to detail and the ability to process large volumes of data in a fast-paced, team-oriented environment. TASKS, DUTIES & RESPONSIBILITIES: 1. A/R & Reconciliation Support (~40%) Daily management and understanding of payment postings within automated system as well as correlating postings in ERP (SAP system) as related to Accounts Receivable with added complexity of discounts, deductions, and chargebacks Management of payment exceptions in automated system, which requires investigative skills to report SAP posting accuracy and corrections as needed Provide pro-active information related to risks and support action items to mitigate such risks and support reconciliation and inquiry – assisting with problem resolution Participate in customer-specific reviews and supply chain discussions to reduce delays and business interruption while collaborating with Credit and Deduction Resolution teams to improve deduction coding and reduce application complexities Entry & Adjustments: Perform manual SAP entries and adjustments as directed to ensure A/R accounts remain clear and the subledger is updated accurately. 1. Sales Billing Support (~35%) Billing Block Resolution: Monitor SAP billing block reports and perform the necessary steps to release blocks for D2C Brands and Retail partners based on established protocols. Data Flow Monitoring: Assist in auditing orders in "shipped" status held by billing blocks to minimize impact on daily targets. Internal Transaction Support: Support the processing of retail Sales Billing Blocks and Company Store sales to ensure uninterrupted billing. Wholesale Billing Support: Support the resolution of B2B Wholesale billing blocks by reviewing master data gaps or credit limit status. Payment Processing: Assist in the processing of ACH/wire and check payments in accordance with department standards. 1. Reporting & Data Maintenance (~15%) Dashboard Updates: Assist in the daily update of Power BI dashboards by ensuring accurate data extracts from SAP. Metric Tracking: Compile data for key Invoice to Cash (I2C) metrics and prepare monthly reports for distribution by the I2C Team. S4 Readiness: Provide administrative and data-entry support for SAP S4 readiness and digital transformation objectives. 1. Cross-Functional Coordination (~10%) Inquiry Resolution: Act as a support contact for Supply Chain inquiries regarding missing sales, pricing discrepancies, or material master data. Process Documentation: Assist in documenting standardized procedures (SOPs) and updating best practice manuals for the department. Integration Support: Provide A/R data support for tasks related to the integration of new brand acquisitions. JOB REQUIREMENTS: Education: College degree required. Experience: Previous experience in a high-volume Accounts Receivable or Finance support role. Technical Skills: Proficiency in Excel (data entry, basic formulas) and Outlook. Previous work using Power BI is requested. Detail Orientation: High level of accuracy in data entry and root cause investigation. Collaboration: Ability to work effectively within a team and take direction from senior analysts and leads. Specific Designations & Certifications ERP: Previous experience in SAP ECC and S4 HANA (or similar large ERP) is required. Software: Exposure to High Radius is highly preferred. Industry: Experience in Consumer Packaged Goods (CPG) or E-commerce is an advantage. CORE COMPETENCIES: Achieves Results: Stays focused on completing daily tasks accurately and on time. Operational Excellence: Maintains high standards of quality for all transactional work. Interacts Effectively: Communicates clearly and updates supervisors on task status and potential escalations. Reliability: Demonstrates consistency in handling repetitive, complex data sets with integrity.

Arctic Air has been keeping New Jersey families comfortable for decades with trusted HVAC service. Known for reliability and expert craftsmanship, Arctic Air is a leading name across the state. As a proud part of TurnPoint Services, Arctic Air offers employees the strength of a national network and the feel of a local team. Our people enjoy a culture of teamwork, continuous training, and opportunities to grow their careers nationwide. Join Arctic Air where steady careers meet long-term success. We are seeking a motivated and dependable Plumbing Helper Service to join our team. In this entry-level role, you will assist licensed plumbers on residential and/or commercial service calls. You'll gain hands-on experience by helping troubleshoot, repair, and maintain plumbing systems while learning industry best practices. This is an excellent opportunity for someone who enjoys working with their hands, is mechanically inclined, and is interested in starting a long-term career in the plumbing trade. High school diploma or GED required. Mechanical aptitude and willingness to learn plumbing service skills. Ability to use hand and power tools safely. Dependable, punctual, and able to follow directions. Strong teamwork and customer-service skills. Physically able to lift 50+ lbs., work in confined spaces, and tolerate varying weather conditions. Valid driver's license and reliable transportation required. Willingness to work flexible hours, including evenings or weekends as service needs require. Assist plumbers with diagnosing and repairing leaks, clogs, and other plumbing issues. Help replace or install fixtures such as faucets, toilets, sinks, and disposals. Support preventive maintenance tasks including water heater flushing, filter changes, and pipe inspections. Prepare, load, and organize tools, parts, and materials needed for daily service calls. Maintain a clean, safe, and organized work area, service vehicle, and tools. Follow company safety guidelines and OSHA requirements on all job sites. Provide courteous and professional support to customers while on site. Learn plumbing techniques, codes, and service skills through on-the-job training and mentorship. Comprehensive Benefits: Medical, dental, and vision coverage; a 401(k) plan with company match; paid parental leave; PTO; company-paid holidays; life and disability insurance; accident, critical illness, and hospital indemnity coverage; and access to voluntary benefits such as pet insurance and identity/fraud protection - everything you need to support yourself and your family. Real Growth Opportunities: With more than 60+ strong local brands behind you, you'll have the chance to grow your skills, take on new responsibilities, and build a long-term career. A Culture with Heart: We lead with teamwork, respect, and integrity. Every voice matters, and every contribution fuels our shared success. Purpose-Driven Work: Every role in the field, office, or leadership makes a real impact by helping families and communities stay safe and comfortable. Competitive Rewards: Strong pay, solid benefits, and recognition programs designed to celebrate craftsmanship, commitment, and exceptional performance. Clear Career Paths: From apprentice and entry-level roles to expert technicians, office leaders, and GMs you'll always know where you can grow next. Training & Development: Hands-on technical instruction, leadership pathways, and continuous learning through our Apprenticeship Academy and brand-level coaching. Modern Tools & Technology: Advanced diagnostics, digital tools, and quality equipment that help you work safer, smarter, and more efficiently. Safety First: A safety-first mindset built into every process so you go home safely every day. Inclusive & Supportive Environment: We welcome all backgrounds and empower every employee to bring their best. Stable & Reliable: The strength of a national platform with the trust of long-standing local brands means your career is secure and supported. Community Impact: Your work strengthens local neighborhoods and supports families in meaningful, practical ways. Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Parental leave, • Referral program, • Vision insurance USD $18.00 - USD $22.00 /Hr. Equal Opportunity Employer. All applicants will receive consideration for employment without regard to race, color, ethnicity, religion, sex (including pregnancy, sexual orientation, and gender identity), national origin, age, disability, genetic information, or other status protected by applicable federal, state, or local law.

Job Description Regional Manager We are seeking a Regional Manager to lead our third-party logistics operations across a defined territory. This role oversees employees and independent contract carriers, merchandise delivery, and warehouse operations at multiple facilities. The Regional Manager will lead recruiting efforts, manage budgets, ensure regulatory compliance, and lead local teams to improve efficiency and reduce costs Company Profile Diakon Logistics provides white-glove, last-mile delivery solutions for leading furniture and appliance retailers nationwide. Come join our growing company, where we are deeply committed to employee development and fostering an internal promotional structure that rewards dedication and growth. We prioritize investing in our team members, offering clear pathways for advancement from entry-level roles to management positions through comprehensive training and mentorship programs. Key Responsibilities • Network Optimization: Design and implement transportation routes, distribution strategies, and inventory flows to reduce transit times and improve efficiency., • Team Leadership: Hire, train, and mentor facility general managers, supervisors and dispatchers, fostering a high-performance, safety-first work environment. Recruit independent contract carriers., • Data analytics: Lead analytics initiatives that use KPIs, dashboards, and reporting tools to improve logistics performance and reduce costs., • Compliance & Safety: Ensure all operations comply with all applicable federal, state, and local regulations., • Performance Tracking: Analyze KPIs, transportation costs, delivery performance, and network efficiency to identify opportunities for cost reduction and process excellence. Position Requirements • Education: Bachelor’s degree in Supply Chain Management, Logistics, Business, or a related field preferred., • Experience: 5 to 7+ years of progressive logistics or supply chain management experience, including multi-site or regional oversight., • Technical Skills: Proficiency with WMS (Warehouse Management Systems), TMS (Transportation Management Systems), and data analytics tools., • Soft Skills: Strong financial acumen, conflict resolution skills, and the ability to make fast, data-driven decisions during disruptions. Compensation & Work Environment • Salary Range: $90,000 - $110,000, depending on experience; plus, benefits and potential for bonus., • Environment: Hybrid role with responsibilities split between remote leadership and on-site warehouse operations. Frequent travel throughout the assigned territory is required. Diakon offers competitive wages and bonuses, medical benefits, 401(k) plan with match, and paid vacations and holidays to full-time employees.

As a member of our Credits, Incentives and Methods (CIM) group, you will be performing tax consulting and advisory services, assisting a variety of taxpayers realize a greater return on their investments via detailed analyses such as cost segregation studies, energy efficient building deduction and credit certifications, Federal tax depreciation method reviews and fixed asset management services. As a Tax Supervisor in the Tangible Property Services (TPS) group, you will be responsible for analyzing clients' fixed assets and depreciation through cost segregation studies, federal tax depreciation method reviews, and fixed asset management services. You will oversee and train associates and senior associates on these projects, identifying technical issues, researching solutions, and ensuring high-quality deliverables. Candidate Responsibilities • Prepare detailed analyses of building construction project costs and acquired properties (cost segregation studies)., • Perform quantity takeoffs from blueprints, construction cost estimating, review and analyze construction project invoices and cost documentation, physically inspect client facilities, research relevant tax authority, prepare engagement documentation, and draft reports for clients., • Review clients' capital maintenance, repair, and improvement expenditures for proper tax accounting treatment, and accurately maintain tax depreciation in various software packages (fixed asset management)., • Review historical fixed asset depreciation schedules, develop import files compatible with software packages, upload current year asset addition/disposition data, reconcile data between book and tax, maintain Microsoft Excel roll-forward schedules, and update historical asset records within the software., • Train and develop TPS tax associates and senior associates, providing support for project engagements through developing scopes of work, budgets, schedules, and deliverables., • Research and understand tax technical issues to apply tax guidance to clients on tangible property matters., • Frequent (10% to 20% of time) out-of-town travel and direct client contact are expected. Minimum Qualifications • Bachelor's degree in construction management, engineering, architecture, accounting, or business management from an accredited university, • Minimum four years of related experience in construction engineering or management, construction cost estimating, cost segregation, or capital assets accounting and depreciation, • Experience interpreting construction drawings, • Knowledge of building systems, construction techniques, construction documentation, and cost estimating techniques, • Strong computer skills, including proficiency in Microsoft Excel, • Demonstrated ability to meet client service, quality, and performance expectations within applicable deadlines and in accordance with firm and client standards, • Strong verbal and written communication skills with the ability to interact clearly, professionally, and effectively with firm personnel and clients, • Effective project management skills, including managing multiple priorities, tasks, and projects simultaneously while meeting deadlines and maintaining accuracy and quality of work in a fast-paced, client service environment, • Comfortable working in a professional office environment and, as required by the role, at client sites, including sitting for extended periods and using standard office equipment, • Reliable onsite presence during core business hours, including regular attendance at a firm office location and travel to client sites as required, with access to dependable transportation, • Flexibility to work extended and/or non-standard hours during peak periods or as necessary to meet client, project, or firm business needs Preferred Qualifications • An active accreditation obtained, in process or willing and able to obtain one of the following: CPA, EA, licensed attorney, or one of the alternative certifications that meets RSM requirements certifications At RSM, we offer a competitive benefits and compensation package for all our people. We offer flexibility in your schedule, empowering you to balance life's demands, while also maintaining your ability to serve clients. Learn more about our total rewards at https://rsmus.com/careers/working-at-rsm/benefits. All applicants will receive consideration for employment as RSM does not tolerate discrimination and/or harassment based on race; color; creed; sincerely held religious beliefs, practices or observances; sex (including pregnancy or disabilities related to nursing); gender; sexual orientation; HIV Status; national origin; ancestry; familial or marital status; age; physical or mental disability; citizenship; political affiliation; medical condition (including family and medical leave); domestic violence victim status; past, current or prospective service in the US uniformed service; US Military/Veteran status; pre-disposing genetic characteristics or any other characteristic protected under applicable federal, state or local law. Accommodation for applicants with disabilities is available upon request in connection with the recruitment process and/or employment/partnership. RSM is committed to providing equal opportunity and reasonable accommodation for people with disabilities. If you require a reasonable accommodation to complete an application, interview, or otherwise participate in the recruiting process, please call us at 800-274-3978 or send us an email at careers@rsmus.com. RSM does not intend to hire entry level candidates who will require sponsorship now OR in the future (i.e. F-1 visa holders). If you are a recent U.S. college / university graduate possessing 1-2 years of progressive and relevant work experience in a same or similar role to the one for which you are applying, excluding internships, you may be eligible for hire as an experienced associate. RSM will consider for employment qualified applicants with arrest or conviction records. For those living in California or applying to a position in California, please click here for additional information. At RSM, an employee's pay at any point in their career is intended to reflect their experiences, performance, and skills for their current role. The salary range (or starting rate for interns and associates) for this role represents numerous factors considered in the hiring decisions including, but not limited to, education, skills, work experience, certifications, location, etc. As such, pay for the successful candidate(s) could fall anywhere within the stated range. Compensation Range: $86,500 - $164,500 Individuals selected for this role will be eligible for a discretionary bonus based on firm and individual performance.

Build our future together: The Manager, Clinical Study Lead may perform the following responsibilities with moderate oversight: accountable for the global execution of assigned smaller or less complex clinical trials from study design, through execution, to study close out. You are accountable for the study timelines, study budget, and ensuring study conduct is in accordance with Regeneron Standard Operating Procedures (SOPs) and ICH/GCP. This role applies to internally sourced studies and studies outsourced to Clinical Research Organizations (CROs) and the balance of direct leadership versus oversight will vary accordingly. Contributes and drives ongoing process improvement initiatives. When & where: • Work Location: Armonk, NY, Warren, NJ, • 25% Travel may be required Discover your role: • Leads the cross-functional study team responsible for clinical study delivery, serving as the primary point of contact for leadership and oversight, and oversees execution against planned timelines, deliverables, and budget while raising issues (conduct, quality, timelines, budget) to the Program Operations Lead and stakeholders and implementing corrective actions, • Provides operational input into protocol development; leads feasibility assessments to select relevant regions and countries; oversees or conducts site evaluation and selection; and leads investigator meeting preparation and execution, • Oversees and contributes to study documentation, including case report forms, data management plan, monitoring plan, monitoring oversight plan, project-specific training plan, data review plan, statistical analysis plan, and related materials, • Oversees set-up and maintenance of study systems (e.g., CTMS, TMF) and ensures compliance with clinical trial registry requirements, • Identifies outsourcing needs and leads vendor engagement, contracting, and management; ensures CROs and third-party vendors are aligned and delivering per scope of work, • Provides input into baseline budget and timeline development and management; ensures accurate budget management and scope change control for internal and external studies, • Leads study-level risk assessment and mitigation; monitors site activation and monitoring visits and acts on deviations; leads development and oversees implementation of patient recruitment and retention strategies and responds to deviations from plan; and monitors data entry and query resolution against agreed metrics, • Manages study close-out activities, including database lock, reconciliation of vendor contracts, budget, TMF, and study drug accountability; contributes to clinical study report writing and review; and facilitates study-level lessons learned, • Assigns tasks to Clinical Study Management staff and supports their deliverables; directly supervises CTM staff (work assignments, performance management, recruitment, professional development, coaching, mentoring, ongoing training and compliance, and study support/oversight); recommends and participates in cross-functional and departmental process improvements; and identifies innovative, globally informed approaches to study execution and continuous improvement of CTM SOPs, • May be assigned unmasked tasks for studies, which may include but is not limited to, assisting with masked investigational product, set up and management of unmasked trial master file, review of unmasked data in the electronic data capture system, point of contact for IVRS issues, and support oversight of unmasked clinical monitoring This role requires: • Bachelor's degree and have at least six years of relevant industry experience, • Extensive budget management expertise; a proven ability to build productive study teams and collaborations; and demonstrated vendor management experience, • Strong technical proficiency with trial management systems and Microsoft applications is required, including Project, PowerPoint, Word, Excel, and platforms such as IVRS/IWRS and EDC, • Experience in global clinical trial operations, including developing protocols and key study documents; solid knowledge of ICH/GCP and relevant regulatory guidelines and directives; and effective project management, cross-functional team leadership, and organizational skills, • Ability to understand and implement the operational strategic direction and guidance for respective clinical studies

We are the leading provider of professional services to the middle market globally, our purpose is to instill confidence in a world of change, empowering our clients and people to realize their full potential. Our exceptional people are the key to our unrivaled, culture and talent experience and our ability to be compelling to our clients. You'll find an environment that inspires and empowers you to thrive both personally and professionally. There's no one like you and that's why there's nowhere like RSM. RSM is looking for an Assurance Sr. Manager to join our Private Equity practice. This practice is dynamic, robust and continues to expand every year. RSM serves a wide range of clients, including approximately 1,500 private equity and venture capital clients. Minimum Qualifications: • Bachelor's degree in Accounting or related field., • Active CPA (or equivalent certification) required., • 9+ years of recent assurance experience within a public accounting environment with extensive exposure to external audit engagements., • Proven experience leading and managing multiple audit engagements from planning through completion, including overseeing engagement teams, managing scopes, timelines, and budgets, and ensuring quality standards are met., • Excellent technical proficiency in accounting and auditing standards, including US GAAP, US GAAS, and other relevant regulatory requirements, with the ability to apply risk-based audit methodology, control testing, substantive procedures, and financial statement review., • Ability to communicate clearly and professionally with firm personnel and clients, manage client relationships, respond to client needs, and address issues while building trust., • Proven client relationship and business development experience, with a history of building, maintaining, and growing sustainable client relationships, identifying opportunities to expand services, and delivering high-quality client service., • Applies sound business judgment, risk awareness, and ethical integrity to ensure audit quality, compliance, and independence, and to provide guidance to team members., • Excellent leadership and people-management skills, including mentoring, coaching, performance feedback, and supporting the career development of audit staff through the manager level., • Ability to work effectively in a professional office environment and, as required by the role, at client sites, including the ability to sit for extended periods of time and work at a computer and other standard office equipment., • Ability to work extended and/or non-standard hours during peak periods or as necessary to meet client, project, or firm business needs., • Ability to maintain consistent onsite presence during core business hours, regularly report to a firm office location, and travel to client sites as required, including access to reliable transportation. At RSM, we offer a competitive benefits and compensation package for all our people. We offer flexibility in your schedule, empowering you to balance life's demands, while also maintaining your ability to serve clients. Learn more about our total rewards at https://rsmus.com/careers/working-at-rsm/benefits. All applicants will receive consideration for employment as RSM does not tolerate discrimination and/or harassment based on race; color; creed; sincerely held religious beliefs, practices or observances; sex (including pregnancy or disabilities related to nursing); gender; sexual orientation; HIV Status; national origin; ancestry; familial or marital status; age; physical or mental disability; citizenship; political affiliation; medical condition (including family and medical leave); domestic violence victim status; past, current or prospective service in the US uniformed service; US Military/Veteran status; pre-disposing genetic characteristics or any other characteristic protected under applicable federal, state or local law. Accommodation for applicants with disabilities is available upon request in connection with the recruitment process and/or employment/partnership. RSM is committed to providing equal opportunity and reasonable accommodation for people with disabilities. If you require a reasonable accommodation to complete an application, interview, or otherwise participate in the recruiting process, please call us at 800-274-3978 or send us an email at careers@rsmus.com. RSM does not intend to hire entry level candidates who will require sponsorship now OR in the future (i.e. F-1 visa holders). If you are a recent U.S. college / university graduate possessing 1-2 years of progressive and relevant work experience in a same or similar role to the one for which you are applying, excluding internships, you may be eligible for hire as an experienced associate. RSM will consider for employment qualified applicants with arrest or conviction records. For those living in California or applying to a position in California, please click here for additional information. At RSM, an employee's pay at any point in their career is intended to reflect their experiences, performance, and skills for their current role. The salary range (or starting rate for interns and associates) for this role represents numerous factors considered in the hiring decisions including, but not limited to, education, skills, work experience, certifications, location, etc. As such, pay for the successful candidate(s) could fall anywhere within the stated range. Compensation Range: $119,100 - $239,300 Individuals selected for this role will be eligible for a discretionary bonus based on firm and individual performance.

Translate the business needs into system requirements, communicating with the business on a non-technical level, and with the System Analyst on a more technical level. Entry Level Full Time Business Analyst / BA Positions. Gather and document requirements and create business process models based on

Job Description Join a Leading Surveying Firm with a Legacy of Excellence Control Point Associates is not your average surveying firm — we are a dynamic team committed to delivering exceptional surveying services. With over 30 years of experience in land surveying, we specialize in services like construction stakeouts, boundary surveys, and 3D laser scanning, serving industries such as construction, engineering, and land development. Our team is expanding, and we’re looking for an experienced, highly technical Survey Technician to join us in Warren, NJ. This role is focused on survey computations, boundary analysis, and technical plan development — not field work or entry-level CAD drafting. If you're a skilled Survey Technician who thrives in a fast-paced, team-oriented environment, we want to hear from you! Why Control Point Associates? At Control Point Associates, we’re a team that focuses on doing great work and helping our employees grow. Here’s why joining us could be the perfect career opportunity for you: • 30+ Years of Expertise: We’ve earned a reputation for exceptional quality, precision, and dependability over three decades of service., • Cutting-Edge Technology: We utilize advanced tools like Trimble, Leica, and 3D laser scanners to ensure the highest standard of work., • Opportunities for Advancement: We invest in your career growth through ongoing training and certification programs., • Collaborative Team Culture: Our work environment promotes teamwork, where everyone contributes to achieving collective success., • Comprehensive Benefits: Enjoy medical, dental, and vision coverage, 401(k) matching, paid time off, and holiday breaks., • Diverse Work Experience: No two days are alike, with a mix of both field and office-based projects to keep your work dynamic and engaging., • Company Perks: Benefit from team lunches, weekly breakfast, holiday celebrations, and a fun, collaborative culture., • Supportive Work Environment: Your contributions are valued, and we prioritize your career development and growth. Essential Functions:, • Deed and reference map plotting, • Preparation and set-up of survey data for field crews, • Post survey field data analysis and/or conversions as necessary, • Construction layout calculations, as-built surveys, and/or sketches, • Grade sheet preparation, • ALTA/NSPS land title survey preparation, • Topographic analysis, • Preparation of Metes & Bounds descriptions, • Preparation of FEMA Elevation certificate, • Preparation of Subdivision Plans and Lot Consolidation Plans, • Oversee and mentor CAD Drafters – review plans prepared by CAD Drafters for accuracy, completeness, and conformance to company and client standards., • Assist and work directly with Assistant Project Managers and Project Managers, • Ability to create mapping from field crew data collector files (points), field sketches, digital photographs, and reference maps, • Accountable for plan presentation, • Survey traverse adjustments Knowledge, Skills, and Abilities: • 5-10+ years of surveying experience in AutoCAD Civil 3D, with a strong focus on office-based technical work, • LSIT preferred or equivalent, • Strong math skills., • Proven record of producing clean and accurate plan presentations., • Knowledge of field survey operations, engineering and construction industry., • Excellent organizational and communication skills., • Ability to learn new software and technologies in a timely manner., • Proficient with MS Word and Excel., • Ability to meet project deadlines within budget., • Self-starter with the ability to work independently and as a team member., • Desire to excel in a fast-paced work environment., • Ability to take and apply direction. Physical Requirements: • Prolonged periods sitting at a desk and working on a computer., • Light to moderate lifting may be required. *Reasonable accommodation may be provided for individuals with disabilities. Compensation and Benefits: • Pay Range: $30-40+ per hour depending on experience., • Additional Benefits: Health, dental, and vision insurance, life insurance, 401(k) match, paid time off, and more. Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time. Equal Opportunity Employer: Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group. Powered by JazzHR LwU2SGOvja

Job DescriptionDescription: Software Support Technician - Entry Level Iselin New Jersey Software Support Technician- Entry Level WHO WE ARE: Celerant Technology Corporation is a leading provider of premium, advanced retail management software for retail organizations. Our software, developed in-house, manages all areas of the retail business including point of sale, inventory management, warehouse, distribution, allocation, e-commerce, sales back office, advanced reporting and more. We give retailers the capabilities necessary to run their operation both efficiently and profitably. Celerant is a successful software company that is rapidly expanding. The main headquarters are located in Staten Island, New York, as well as additional satellite offices in Georgia, Oklahoma, Texas and California. Celerant's staff consists of several departments including Marketing, Sales, Development, Quality Assurance Testing, Hardware, Implementation and Training, and Technical Support. For more information, visit us at www.celerant.com. The ideal Technical Support candidate should be detailed orientated, possess the ability to work effectively with co-workers and end users, and exhibit outstanding customer service skills. RESPONSIBILITIES: • Answer phone calls and email inquiries from users and provide technical support/guidance to resolve issues., • Log all incidents into the department call tracking system as per departmental standards., • Assist in the creation of knowledge base articles as they pertain to the present and future environment, • Work on unresolved issues from evening and weekend shifts., • Escalate any possible wide spread issues to the Technical Support Manager as identified by e.g., high volume of calls pertaining to a similar issue, etc., • Support Implementation/Training Team with any customer issues. SKILL REQUIREMENTS: • BA or equivalent degree in Computer Science, Information Technology, or related field. • Basic SQL knowledge preferred., • Relational database experience is a plus. Requirements: RESPONSIBILITIES: • Answer phone calls and email inquiries from users and provide technical support/guidance to resolve issues., • Log all incidents into the department call tracking system as per departmental standards., • Assist in the creation of knowledge base articles as they pertain to the present and future environment, • Work on unresolved issues from evening and weekend shifts., • Escalate any possible wide spread issues to the Technical Support Manager as identified by e.g., high volume of calls pertaining to a similar issue, etc., • Support Implementation/Training Team with any customer issues. SKILL REQUIREMENTS: • BA or equivalent degree in Computer Science, Information Technology, or related field. • Basic SQL knowledge preferred., • Relational database experience is a plus.

Job Description About Spectrum Vascular Spectrum Vascular is an innovative medical device company focused on vascular access and medication management. Our mission is to improve the lives of patients worldwide by providing caregivers with high quality, innovative products with exceptional customer service. We are a company that was formed through the acquisition of a portfolio of trusted products that have been widely used by customers for decades. Innovation has been a core strategic pillar throughout our history and many of our products have been designed to deliver antimicrobial and antithrombogenic protection or to support certain patient populations such as those who are critically ill and pediatrics. This role represents a unique opportunity to join a dynamic and growing team with established products and an entrepreneurial mindset. We have an immediate need for an intern to join me as we continue to build our IT capabilities. This is for an initial three-month internship and the successful individual should have a degree in IT and/or have previously worked in an entry-level IT position. The role will be based at the Warren, NJ office and will be customer-facing; therefore, the individual must be comfortable communicating with various levels of employees to help them troubleshoot their IT problems. Role Responsibilities: The day-to-day responsibilities will vary and could include: • Assist with software development by supporting the development and testing of reports in Tableau using data from Snowflake. This may include coding, debugging, troubleshooting, and deploying code., • Provide technical support to users in Warren, NJ by troubleshooting and resolving technical issues. Work with business users to gather requirements and propose solutions in close coordination with the Head of IT., • Provide administrative support for the new headquarters in Warren, NJ by helping manage network connectivity, printer configuration and setup, access management, and troubleshooting as needed, while also coordinating with vendors appropriately., • Support help desk activities by monitoring tickets related to data uploads and working with the appropriate business users and SMEs to design solutions., • Assist with database management activities, including data entry, data backup, and recovery., • Help document IT processes and procedures to support smooth operations., • Participate in training and professional development opportunities to strengthen IT skills and knowledge., • Shadow experienced IT professionals to gain a deeper understanding of the field., • Role Requirements:, • Bachelors degree in IT, • 2 or less years experience in related entry level IT role Spectrum Vascular is an Equal Opportunity Employer and committed to creating a diverse and inclusive company culture. Spectrum Vascular does not discriminate against candidates and employees because of their disability, sex, race, gender identity, sexual orientation, religion, national origin, age, veteran status, or any other protected status.

Job Description Astro Pak is the nation's leading precision cleaning and passivation contractor specializing in on-site cleaning of high purity gas and fluid systems, as well as precision cleaning of components and hardware at the company's Cleanroom facilities. Astro Pak provides services to over 15 sectors including: Data Centers, Biotechnology, Pharmaceutical, Aerospace, Semiconductor, and other selected Industrial markets. The company, founded in 1959, has performed on-site precision chemical cleaning in every State of the Union as well as several projects in Asia, Canada, continental Europe, England, Ireland and Mexico. Astro Pak is looking for motivated individuals who want more than a typical job. As an Associate Field Technician, you'll travel to cutting-edge facilities across the country while learning a specialized technical trade used in industries like aerospace, semiconductors, pharmaceuticals, and advanced manufacturing. If you enjoy hands-on work, solving problems, and seeing new places while building valuable technical skills, this role could be a great fit. $3,000 Sign-On Bonus What You'll Experience This is not a typical entry-level job. It's a traveling technical career path. You'll receive immersive training and work alongside experienced technicians performing specialized chemical cleaning and passivation on mission-critical fluid and gas systems. Every project is different. One week you may be working at a semiconductor facility, the next supporting aerospace manufacturing. Expect: • Extensive travel to project sites across the U.S., • Hands-on work with specialized equipment and chemical processes, • Rapid skill development and certifications, • Opportunities to grow into senior technician or leadership roles Travel requirements: • 80%+ travel nationwide, • 30–50% night shift work, • Overtime, weekends, holidays, and short-notice travel may be required What You'll Do As part of a field service team, you will: • Set up and operate specialized equipment for chemical cleaning and passivation, • Safely handle process chemicals such as citric acid and caustics, • Use PPE and follow strict safety and compliance procedures, • Load, transport, and unload project equipment and materials, • Drive company vehicles to job sites (vans, trucks, forklifts), • Perform hands-on work in a variety of environments (indoors, outdoors, rooftops), • Maintain organized workspaces aligned with 5S/CEO standards, • Complete OSHA and internal safety training, • Support mission-critical customer facilities across the country Who Thrives in This Role We hire for attitude and train for success. The best candidates are: • Mechanically inclined, • Comfortable working with tools and equipment, • Adaptable to new environments, • Safety-focused, • Excited about travel and hands-on work, • Interested in building a long-term technical career Basic Requirements • Valid Class C driver's license with clean driving record, • Real ID or Passport required for air travel, • Ability to attend two weeks of paid training in California within the first 3 weeks of employment, • Medical DOT certificate, • Strong math skills (ratios, percentages), • Comfortable using mobile technology and basic programs (Word, Excel, Outlook), • Fluent in English with strong communication skills, • Ability to lift 50 lbs. and work in PPE in changing environments, • Willingness to work night shifts, overtime, weekends, and holidays Preferred (But Not Required) • High School Diploma or GED, • Technical schooling or trade certification, • OSHA / HAZWOPER / Confined Space certifications, • Field service or hazardous chemical handling experience Why Join Astro Pak? Paid Training & Certifications • No experience required. We provide hands-on training and help you earn industry certifications. Travel Opportunities • Work at advanced manufacturing and technology facilities across the country while building your career. Career Growth • Many of our technicians advance quickly into senior technical roles, trainers, or leadership positions. Team Culture • Work alongside experienced professionals in a safety-first, supportive team environment. Competitive Benefits • Highly subsidized medical, dental, and vision insurance, • 401(k) with company match, • Paid time off and family leave, • Travel stipend, • Training and development opportunities, • Flexible spending accounts and more Compensation: The pay for this position typically has a starting rate of $22. The actual salary offer will carefully consider a wide range of factors, including your skills, qualifications, experience and location. Astro Pak, LLC is an equal opportunity employer. We provide equal employment opportunity to all qualified applicants and employees without regard to race, color, religion, sex (including pregnancy, sexual orientation, gender identity), age (40 or older), national origin, disability, genetic information, or protected veteran status. We will reasonably accommodate applicants or employees with disabilities, and comply with all applicable federal, state, and local anti-discrimination laws.