Entry level technical jobs in Edison, New JerseyCreate job alerts

Job Description Job Description Date 10/2025 Location 22 Van Dyke Avenue, New Brunswick NJ 08901 / 1300 Airport Road, North Brunswick NJ 08902 Title Operator, Dispensing Department Dispensing Reports to Manager, Dispensing FLSA (Exempt or Non-Exempt) Non-Exempt Role Overview The Dispensing Operator will perform all functions related to dispensing of material, receipt of goods, put-away material into warehouse aisles, pull out material per Batch card/Pick ticket, put back to same location from where it was pulled for batches, manual order processing, order auditing, shipment preparation, pallet building, transferring material from wood to plastic pallets, and cycle counting inventory. All functions may require the use of powered industrial trucks, Syspro or RF as needed. Will need to work in temperature-controlled areas. Areas of Responsibility Level 1: Dispensing Operator Overview: This is a training-level role for individuals with limited or no prior experience in pharmaceutical dispensing. Works under close supervision while learning company SOPs, GMP standards, and equipment operations. Key Responsibilities: • Assist in pulling and weighing raw materials under supervision., • Learn to read and interpret batch cards and pick slips., • Calibrate scales before use., • Cleans room after batch is complete, • Ensures safety and quality standards are consistently followed., • Maintain basic cleanliness of work area and equipment., • Support warehouse duties such as material receipt and basic inventory handling., • Follow safety procedures and learn PPE protocols., • Operate pallet jacks or assist with forklift activities (if certified). Level 2: Dispensing Operator Overview: This level is for operators with hands-on experience in pharmaceutical or supplement dispensing. Operators are responsible for completing batch-related activities with minimal supervision and maintaining documentation compliance. Key Responsibilities: • Dispense raw materials independently per batch cards., • Reviews batch card. Determine material to be used in the batch. Pull out material per requirement and enter in logbooks., • Performs requests received from other departments such as R&D, Production, QA or Purchasing etc., • Cleans room after batch is complete, • Ensures safety and quality standards are consistently followed., • Weigh materials accurately and calibrate scales before use., • Use Syspro or RF systems for inventory control., • Handle, put-away, return, and transfer of goods between warehouse locations., • Perform manual order processing, auditing, and preparation for shipments., • Maintain gowning and hygiene protocols in controlled environments., • Ensure accurate documentation in logs and batch records. Level 3: Dispensing Operator Overview: A highly experienced operator who may act as a team lead or trainer. Oversees batch dispensing activities, ensures compliance, and supports continuous improvement initiatives. Key Responsibilities: • Lead batch dispensing operations; verify materials and documentation., • Train and mentor entry and intermediate-level operators., • Collaborate with cross-functional teams (QA, R&D, Production)., • Reviews batch card. Determine material to be used in the batch. Pull out material per requirement and enter in logbooks., • Performs requests received from other departments such as R&D, Production, QA or Purchasing etc., • Cleans room after batch is complete, • Ensures safety and quality standards are consistently followed., • Conduct cycle counts and helps manage inventory accuracy., • Troubleshoot equipment or material issues; escalate when necessary., • Lead compliance audits for dispensing areas., • Support continuous improvement, safety, and 5S initiatives. Physical & Environmental Requirements (All Levels): • Able to lift 55 lbs regularly; occasionally up to 75 lbs., • Stand/walk for 6+ hours per shift., • Work in temperature-controlled rooms with PPE (lab coat, gloves, face mask, respirator, etc.). Requirements Education & Qualification: Level 1: Dispensing Operator • High school diploma or GED., • 0–1 year of experience in manufacturing or warehouse setting., • Basic math and English reading skills., • Willingness to learn cGMP, OSHA, and SOPs. Level 2: Dispensing Operator • High school diploma or GED., • 2+ years of experience in a pharmaceutical production environment., • Forklift operation experience (certification preferred)., • Familiarity with cGMP and SOP documentation standards., • Attention to detail and ability to troubleshoot basic dispensing issues. Level 3: Dispensing Operator Requirements: • High school diploma or GED; technical certification a plus., • 4+ years of dispensing experience in a GMP-regulated and within a pharmaceutical production environment, • Strong understanding of regulatory compliance (FDA, GMP, OSHA)., • Proven ability to lead teams and communicate effectively., • Proficient in inventory software (Syspro or similar ERP systems)., • Additional experience in granulation, compression, or blending is a strong plus. Certifications, Licenses, Credentials: • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards, etc., • Mechanically inclined to understand the inner workings of the equipment., • Demonstrates the ability to read and write basic English to be able to understand the industry-regulated instruction sheets., • Ability to lift up to 55 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift, • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment., • Must be able to wear all PPE including a lab coat, face mask, booties, gloves, safety glasses/goggles, and respirators. Work Environment (Office, Warehouse, temperature extremes, etc.): • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment

Job DescriptionCompany Description Cornerstone Building Brands is a leading manufacturer of exterior building products for residential and low-rise non-residential buildings in North America. Headquartered in Cary, N.C., we serve residential and commercial customers across the new construction and Repair & Remodel (R&R) markets. Our market-leading portfolio of products spans vinyl windows, vinyl siding, stone veneer, metal roofing, metal wall systems and metal accessories. Cornerstone Building Brands’ broad, multi-channel distribution platform and expansive national footprint includes more than 18,800 team members at manufacturing, distribution and office locations throughout North America. Corporate stewardship and Environmental, Social and Governance (ESG) responsibility are embedded in our culture. We are committed to contributing positively to the communities where we live, work and play. For more information, visit us at cornerstonebuildingbrands.com Job Description JOB DETAILS Base Pay $23.00 per hour. 2nd Shift: 3pm-11:30pm Monday-Friday DUTIES AND RESPONSIBILITIES • Able to assess a situation and determine if an issue is machine-related or process-related and take corrective action, • Efficiently work on non-conforming processes to get them in specification, • Diagnose complex extrusion problems to resolve issues, including flow corrections, • Work with the supervisor, team lead, engineering, and maintenance to resolve complex issues, • Assist with production qualification runs, including capability assessment, • Participate in and support projects that are driven by business initiatives, • Provide training, instruction, and guidance to production associates, • Support, train, and assess associates' learned skills through the Pay for Skills program, • Work safely and attainment policies. Ensure co-workers are working safely and following safety policies, • Train new operators, • Analyze SPC data to determine process/product conformance and trends, • Analyze production data and make necessary adjustments to the operation of machines within the work cell, • Identify and communicate appropriately when electrical/mechanical/technical support is needed, • Participate and sustain 5S activities, • Participate in and lead kaizen events, and sustain the improvements resulting from those events., • Maintain and develop back-up tooling and transition tooling into production., • Help transition and qualify new materials, processes, and profile applications., • Identify and implement process improvement concepts, • Help to identify and assist with experiments aimed at reducing customer-related concerns, improving process capability, and tooling longevity, • Help develop and train associates, • Conduct and provide feedback where applicable for associates, • Participate and support projects that are driven by business initiatives, • Set up and start up any profile for all machines in a work cell, • Tend to and operate machines in a work cell to produce required parts as determined by customer requirements and the production schedule, • Perform maintenance tasks as necessary, • Attend and participate in appropriate training and development programs, • Perform other duties across the plant as directed by supervision or management, • Assists crew lead and supervisor with the training and development of entry level and senior level operatorsQualifications, • Experience with profile extrusion, • Strong prioritization and multi-tasking capability, • Strong aptitude in problem solving and process improvement, • Strong computer skills – Windows, MS Access, MS Excel, • Equipment maintenance experience, • Ability to articulate problems and solutions verbally, • Ability to read and comprehend written instructions and process procedures, • Ability and skills to collaborate effectively in a team environment, • Self-motivated and capable of managing stressful situations, • Ability to lift 50 pounds on a continual basis above shoulder height and below the waist Additional Information Site Location: 1 Silverline Dr. North Brunswick Township, NJ 08902 Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. Cornerstone Building Brands is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, or status as a protected veteran. You can find the Equal Employment Opportunity Poster here. You can also view Your Right to Work Poster here along with This Organizations Participation in E-Verify Poster here. If you'd like to view a copy of the company's affirmative action plan for protected veterans or individuals with disabilities or policy statement, please contact Human Resources at 281-897-7788 or . If you have a disability and you believe that you need a reasonable accommodation in order to search for a job opening or to submit an online application, please contact Human Resources at 281-897-7788 or . This email is used exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only emails received for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. All your information will be kept confidential according to EEO guidelines. California Consumer Privacy Act (CCPA) of 2018 Must be at least 18 years of age to apply. Notice of Recruitment Fraud We have been made aware of multiple scams whereby unauthorized individuals are using Cornerstone Building Brand's name and logo to solicit potential job-seekers for employment. In some cases, job-seekers are being contacted directly, both by phone and e-mail. In other instances, these unauthorized individuals are placing advertisements for fake positions with both legitimate websites and fabricated ones. These individuals are typically promising high-paying jobs with the requirement that the job-seeker send money to pay for things such as visa applications or processing fees. Please be advised that Cornerstone Building Brands will never ask potential job-seekers for any sort of advance payment or bank account information as part of the recruiting or hiring process.

Job Description This job is located in Hillsborough, NJ. Entry-level install with growth skilled tech position for telecom to IP Technologies careers. Exposure to alarm systems and Local Area Networks. Focus on Avaya and Local Area Networks (LAN). Work on Internet Security and Network Infrastructure. 4-day workweek. Telecommunications Technician Job Summary: We are seeking a motivated, individual to join our IT consultancy as a Telecommunications Technician. As part of our team, you work directly with clients in installing, repairing, and upgrading telecommunications technology and infrastructure. This may involve everything from traditional phone lines and fiber optics to wireless and satellite technologies. This position requires you to have broad technical knowledge of communications technologies, both traditional and emerging, strong attention to detail and excellent organizational and communication skills. Telecommunications Technician Duties and Responsibilities: • Work with clients to determine their current telecommunications capabilities and future needs, • Visit worksites to install, repair, or upgrade telecommunications equipment and infrastructure, • Maintain a high level of understanding of emerging trends and technologies, especially about security and encryption, • Some experience in IT implementation., • Interest in knowledge of telecommunications technologies, infrastructure, and emerging trends., • Excellent attention to detail and communication skills. Company DescriptionSince 1981, Novacom has been a leader in the sales and service of low voltages systems for businesses. Please see: . Novacom is one of few industry firms rated A+ by Better Business Bureau (BBB).Since 1981, Novacom has been a leader in the sales and service of low voltages systems for businesses. Please see: . Novacom is one of few industry firms rated A+ by Better Business Bureau (BBB).

Job DescriptionDescription: Setup Configuration Analyst We are looking for a skilled and highly motivated person to join our Setup/Updates team as an entry level Setup Configuration Analyst. The primary responsibility of this role is to remotely perform scheduled setup of hardware and software for customers. As a Setup Configuration Analyst, you will work closely with our implementation/project management team as well as with customers to complete the assigned tasks. The ideal candidate should be detailed orientated, be able to work independently, possess the ability to work effectively with co-workers and customers, and exhibit outstanding customer service skills. RESPONSIBILITIES: - Remotely perform setup of POS system hardware and software components. - Complete assigned tasks accurately and in a timely manner. - Provide status updates of assigned tasks to customer and project manager. - Escalate issues to the technical support team, project manager, development team and department manager as necessary. - Create/update department documentation, provide feedback to department manager. SKILL REQUIREMENTS: - Bachelor’s degree in Computer Science, Information Technology, or 5+ years of equivalent experience - SQL programming and relational database knowledge - Basic networking and client/server system architecture knowledge - Strong oral and written communication skills - Flexibility to work outside normal hours as needed - Experience with Microsoft SQL Server, Windows Server, Apache Tomcat, and Java is preferred - Experience with using retail software or providing technical support in small/medium business applications is a plus Flexible Work Place/Hours Benefits include Medical, 401(K), Vacation/Sick leave, Life Insurance, FSA. Optional Dental and Eye Care Coverage Available Requirements: SKILL REQUIREMENTS: - Bachelor’s degree in Computer Science, Information Technology, or 5+ years of equivalent experience - SQL programming and relational database knowledge - Basic networking and client/server system architecture knowledge - Strong oral and written communication skills - Flexibility to work outside normal hours as needed - Experience with Microsoft SQL Server, Windows Server, Apache Tomcat, and Java is preferred - Experience with using retail software or providing technical support in small/medium business applications is a plus

Job Description Hiring Company Overview Tri-State Light & Energy (TSLE) is an energy efficiency consulting and implementation contracting firm with a 40-year history in customer service and energy cost saving delivery. TSLE is a Minority Based Enterprise (MBE) for multiple states and has a major focus on providing support for DEI and Diversity initiatives. Regionally, TSLE delivers Direct Install Programs, Engineered Solutions Programs, Energy Savings Improvement Programs, and Engineering Services for Municipal, Commercial and Industrial Clients. TSLE is consistently recognized and awarded for being a small business champion that marries innovative technology with small company personalization and service. We are growing and looking to hire dedicated, industry-qualified candidates at all experience levels to grow with our company. Section Title: Job Description Job Description We are seeking a dedicated and detail-oriented Energy Engineer to join our team in New Brunswick, New Jersey. The ideal candidate will be responsible for conducting energy audits, data collection and entry, feasibility studies, engineering assessments, and providing program-related support activities. This crucial role also involves conducting on-site inspections, design support, reviewing technical documents, and participating in construction management. The Energy Engineer will play a vital role in ensuring our projects realize their energy savings and meet all regulatory standards. Section Title: Job Responsibilities Job Responsibilities • Perform onsite inspections, including detailed data collection and performance testing., • Prepare site investigation, preliminary design, and due diligence reports, including review of ordinances, utility service research, outside agency regulations, and onsite visits to establish comprehensive development guidelines., • Provide thorough education to end users regarding energy efficiency; field and answer related questions., • As a subject matter expert, be responsible for project coordination with the client, other consultants, contractors, and the project team to prepare a comprehensive site plan application., • Ensure technical aspects of work are performed following applicable regulations or project plans., • Investigate problems in construction or renovation projects., • Provide technical assistance to customers, contractors, and other stakeholders, including support with energy savings calculations and meeting program requirements., • Support and promote relationships with industry and solution partners to maximize project implementation, promote efficiency, and educate customers while sustaining a robust program pipeline., • Prepare written correspondence to outside agencies, clients, contractors, etc., • Perform site visits to verify the appropriate installation of recommended measures., • Monitor new products and technologies related to this industry for ongoing and future projects., • Stay informed about energy issues and industry trends through regular technical reading and participation in local and national professional organizations., • Provide thorough education to end users regarding energy efficiency, field and answer related questions., • Perform other duties as assigned. Section Title: Qualifications Qualifications Bachelor’s or master’s in engineering (Mechanical, Electrical, Energy). Other engineering disciplines will be considered. • Demonstrated interest in energy efficiency is must., • A minimum of 1 year of relevant engineering or fieldwork experience required; 2 to 5 years are preferred., • Must reside in New Jersey., • Demonstrated knowledge of Lighting and Lighting Controls, HVAC Equipment, Building Management System (BMS) and Building Envelope Components., • Demonstrated experience with energy codes and standards (IECC, ASHRAE, etc.) and Energy Star components., • Knowledge of ASHRAE level energy auditing, • Must be able to lead and perform on-site and virtual audits and customer site visits in various environments, including commercial, industrial, school, and government facilities., • Strong project management skills with the ability to set priorities, collect and document project requirements, successfully handle multiple projects simultaneously, and meet deadlines in a fast-paced environment., • Ability to maintain and operate personal and/or company vehicles with a valid driver’s license., • Must be willing and able to travel within the tri-state area; some overnight travel may be required., • Strong customer service capability focusing on proactively identifying customer needs and managing customer expectations., • Excellent written and verbal communication skills., • Self-starter who can work independently or within a team environment., • Exceptional organizational, time-management, and planning skills. Section Title: Professional Skills Professional Skills • Familiar with the use of AutoCAD to assist in the production of site plan drawings., • Knowledge of eQuest, EnergyPlus or Open Studio software is a plus., • Proficient in using Microsoft Software including Word, Excel, Outlook, and Project and other management software. Section Title: Physical Abilities Physical Abilities The physical demands described here represent those that an employee must meet to perform the essential functions of this job successfully. • While performing the duties of this job, the employee is occasionally required to stand; sit, walk, climb, balance, stoop, kneel, crouch or crawl; use hands to finger, grasp, or feel objects; reach with hands and arms; push or pull; talk and hear; use repetitive motions., • The employee is frequently required to lift and/or move up to 20 pounds and occasionally lift and/or move up to 25 pounds., • The employee must have visual acuity to perform activities such as preparing and analyzing data and figures, transcribing, viewing a computer terminal, and extensive reading and visual inspections of site plans. Section Title: Work Environment Work Environment While performing the duties of this job, the employee is subject to the following work environment: • The employee is subject to both inside and outside environmental conditions., • The employee is subject to hazards such as proximity to moving mechanical parts, moving vehicles, and electrical current. Section Title: Equal Employment Opportunity (EEO) Equal Employment Opportunity (EEO) TSLE is an equal-opportunity employer committed to diversity and inclusion in the workplace. TSLE prohibits discrimination and harassment of any kind based on age, race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, age, marital status, gender, gender identity or expression, veteran status, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. TSLE makes hiring decisions based solely on qualifications, merit, and business needs at the time. Please read through our EEO Policy for more information. TSLE is committed to working with and providing reasonable accommodation to applicants with physical and mental disabilities. TSLE is a drug-free workplace. Section Title: Screening Screening TSLE makes offers of employment contingent upon (1) successful completion of a routine background investigation and reference check, (2) drug testing, and (3) Act 34 Child Abuse clearance. Section Title: Benefits Benefits • Medical, vision, and dental insurance., • 401(k) and company match after 1st year anniversary., • Company-provided life insurance., • Health Savings Account (HSA)., • Education reimbursement program with management approval., • Annual paid time off., • Observance of 8 Federal Holidays. Section Title: Work Schedule Work Schedule • Monday through Friday, 8:00 a.m. to 5:00 p.m., • 40-hour work week., • Occasional weekends., • On-call requirement. Section Title: Compensation Compensation • Salary Range: Minimum $85K + commensurate with experience.

Job Description Production Documentation Administrator About CompoSecure Founded in 2000, CompoSecure (NYSE: CMPO) is a technology partner to market leaders, fintechs and consumers enabling trust for millions of people around the globe. The company combines elegance, simplicity, and security to deliver exceptional experiences and peace of mind in the physical and digital world. CompoSecure's innovative payment card technology and metal cards with Arculus security and authentication capabilities deliver unique, premium branded experiences, enable people to access and use their financial and digital assets, and ensure trust at the point of a transaction. For more information, please visit and . Position Overview: The Production Documentation Administrator is an entry-level responsible for assisting in the creation and release of Engineering Masters and Work Orders. These documents guide the planning and processing of orders for the Supply Chain and Prototype Team. The role involves documenting operation steps, instructions, and material needs, while working closely with various departments to ensure accuracy and consistency. The Production Documentation Administrator will be expected to work on-site five days a week in our Somerset, NJ office. Key Responsibilities: Documentation • Help create and distribute Finished Goods Parts documentation., • Attend team meetings to understand special processing or material needs., • Use Visual software to assist in creating and reviewing Engineering Masters and Work Orders., • Support the release of documentation to Supply Chain, Prototype Team, Engineering Teams, and Quality Control., • Record and implement standard practices and updates., • Understand and support Part ID creation., • Assist in reviewing and applying changes to Engineering Masters and Work Orders based on Engineering Change Notices (ECNs) or email instructions., • Help distribute updated documents to relevant teams., • Develop/Follow documentation process to make updates., • Ability to navigate various screens within the ERP system to make updates. Other Important Responsibilities • Follow company policies and safety procedures., • Manage basic email communications related to documentation., • Conform to department best practices., • Create/Attend Meetings as necessary., • Perform other tasks assigned. Qualifications: • Associate's degree (bachelor's degree preferred)., • 0–2 years (or more) of experience in a technical writing or manufacturing support role., • Familiarity with Visual Database systems is a plus., • Experience in a manufacturing environment is a plus., • Basic proficiency in Microsoft Office Suite., • Familiarity with Workflow software is a plus., • Strong written and verbal communication skills., • Detail-oriented with a willingness to learn and self-review work., • Ability to manage time and prioritize tasks effectively., • Enthusiastic attitude, cooperative team player, adaptable to a highly dynamic environment, professional demeanor, sensitive to client needs, self-motivated, creative and innovative., • Capable of working in an office setting for extended periods., • Frequent use of computer, phone, and office equipment., • Moderate noise level in office environment. Physical requirements and work environment • Must be able to lift 20 lbs;, • Must be able to sustain office work for 8+ hours per day including:, • Sitting in an office chair or walking through the shop, • Typing, and sight for computer use., • Reaching for the telephone, hearing for phone use, • Office environment is of moderate noise level. At CompoSecure, we believe in supporting our employees with a comprehensive benefits package that promotes health, financial well-being, and work-life balance. Our full-time team members enjoy access to: • Medical, Dental & Vision Coverage, • Flexible Spending Accounts (FSA), • Company-Paid Life and Disability Insurance, • 401(k) with Company Match, • Paid Time Off & Paid Holidays, • Annual Bonus Opportunities, • Employee Assistance Program (EAP) Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to . CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans.

Job DescriptionCompany Description Global supply chain management is what we do, and at the heart of Expeditors you will find professionalism, leadership, and a friendly environment, all of which foster an innovative, customer service-based approach to logistics. Expeditors is a global logistics company headquartered in Seattle, Washington. As a Fortune 500 company, we employ over 19,000 trained professionals in a worldwide network of over 350+ locations across six continents. Expeditors satisfies the increasingly sophisticated needs of international trade through customized solutions and seamless, integrated information systems. Our Mission is to recruit, train, and retain the very best logistics and technical experts the world over. We love to promote from within - more than 50 percent of our employees have been at Expeditors for five years or more. Our high retention rate is influenced by a unique compensation program for positions that are more than just jobs - they're chances to grow, do what you love and build a career with us! Job Description Duties and Responsibilities • Ensure smooth and timely customs process flow, • Ensure accurate and timely data entry into our operational system, • Track and Trace Custom files and reporting, • Ensure accurate and timely client billing, • Understand all the elements of the import and export customs Desk Level Operating Procedure and correctly interpret this information to fulfill our customer´s instructions and expectations., • Transfer customs declaration information from documents, or other sources into the customs entry system to allow for the build of a valid customs declaration, • Assist with verification of customs declaration information and the submission of such to the customs authority • Daily execution of workflow and department metrics., • Build and maintain strong relationships with customers and governmental Customs organizations., • Timely completion of items on learning plan(s) and Personal development plan. Systems: • Embrace and utilize productivity tools, • Be open to implementing new system changes and enhancements., • Be involved and suggest system/process improvements. Culture: • Bachelor's degree, • Professional oral and written communication skills in English, • Demonstrate exceptional customer service skills, • Organizational skills, • Needs analysis skills, • Problem solving skills, • Strong Microsoft Office skills (Word, Excel etc.) Additional Information Expeditors offers excellent benefits: • Paid Vacation, Holiday, Sick Time, • Health Plan: Medical, • Life Insurance, • Employee Stock Purchase Plan, • Training and Personnel Development Program, • Growth opportunities within the company, • Employee Referral Program Bonus, • Salary range: $48,000 - $51,000

Job Description Position Summary The Regional Line-Haul Dispatcher is responsible for daily Line-Haul Line-Haul transportation scheduling, routing, and operational coordination within the assigned region HUB. This role ensures on-time departures, delivery performance, and real-time communication between warehouse operations, carriers, and the national fleet team. The dispatcher will play a key role in balancing service quality, cost efficiency, and resource utilization across regional and national networks. Key Responsibilities • Daily Dispatch & Operations Management-, • Plan and execute daily dispatch schedules for line-haul and feeder routes within the assigned region., • Monitor driver check-in, loading, departure, and arrival status; address any in-transit issues such as delays, vehicle swaps, or accidents., • Coordinate with warehouse and operations teams to ensure smooth loading/unloading and minimize dock congestion., • Capacity Coordination & Carrier Management, • Collaborate with the Fleet Department to allocate available capacity, including primary, backup, and emergency carriers., • Track carrier performance (on-time rate, communication response, cargo handling, etc.) and provide feedback for performance evaluation and penalty/reward recommendations., • Support new carrier on boarding, contract execution, and payment documentation., • Cost & Time Performance, • Monitor route performance metrics including CPM (Cost Per Mile), on-time delivery rate, and asset utilization.- Identify route optimization opportunities to reduce empty miles, idle time, and waiting costs., • Support the regional and national teams with data for performance reviews and cost analysis., • Exception Handling & Communication, • Log and handle first-level operational exceptions such as shipment delays, damages, or driver no-shows., • Escalate severe or recurring issues to the Fleet Department with detailed event reports., • Coordinate with customer service and warehouse teams to ensure timely issue resolution and client communication., • System & Data Management, • Use the company’s TMS or dispatching platform for job assignment, GPS tracking, and data entry., • Generate daily/weekly operational reports and route performance summaries., • Verify shipment and delivery data with finance for billing and payment reconciliation., • Cross-Functional Collaboration, • Maintain effective communication with the warehouse, customer service, and finance teams. Morning 10:00AM– 6:30 PM (Flexible or night shifts during peak periods). Night 12：30～21：00 (Flexible or night shifts during peak periods). Requirements Education: Associate degree or above, preferably in Logistics, Transportation Management, or Supply Chain. Experience: • Minimum 1 year of dispatching or fleet coordination experience., • Experience in line-haul or LTL operations is a strong plus. Technical Skills: • Proficiency in TMS, Excel, and GPS tracking tools., • Strong analytical and communication skills., • Familiarity with U.S. interstate routes (e.g., I-5, I-10, I-80) preferred. Personal Attributes: • Highly organized, proactive, and detail-oriented., • Able to handle high-pressure situations and shift priorities quickly. · 7 PTO days · 5 Paid Sick Leave Days · 6 Paid Holidays · 401K 100% Matching up to 2% · 50% Medical insurance, 100% Dental and Vision Insurance Pay Range: 20-25/hour for specialist Supervisor: 60K+

Job DescriptionWho We Are At The Falcon Group, our mission is to deliver exceptional service across a broad range of industries, including multifamily, industrial, commercial, retail, hospitality, healthcare, and forensic/litigation support. Built on decades of experience, we provide a full spectrum of services, from architectural design to civil, structural, mechanical, electrical, and plumbing engineering, as well as construction administration and forensic assessments. This integrated approach allows us to deliver comprehensive, cost-conscious solutions to our clients’ most complex challenges. With a growing presence in key markets and multiple regional offices, we’re expanding rapidly and always looking for talented professionals to join our team. Guided by collaboration, innovation, and integrity, The Falcon Group provides the environment and support to help you thrive personally and professionally. The Role: Building Envelope Project Engineer (Structural) – PE or EIT Location: Warren, NJ SUMMARY We are seeking a motivated Building Envelope Project Engineer (Structural) with a strong interest in investigation, repair, and rehabilitation of existing buildings. The position focuses on roofing, façade, structural, and balcony/deck rehabilitation projects, primarily within the multifamily sector. The engineer will provide technical evaluations, structural & envelope assessments, design support, and construction-phase engineering oversight. Depending on experience, candidates may assist in investigation, design development, structural/envelope detailing, report writing, and construction administration. Primary Responsibilities General Engineering / Project Support • Perform engineering evaluations of building envelope and structural systems, including roofs, façade components, balconies, decks, and related structural elements., • Prepare technical reports summarizing existing conditions and recommended repair strategies., • Assist with development of repair drawings, details, and specifications, with oversight from senior engineers., • Prepare written correspondence to clients, contractors, and code officials., • Manage and maintain organized technical records, drawings, test data, field photos, and project documentation., • Review project scopes, budgets, and schedules with supervising engineers to ensure deliverables are met., • Assist in construction administration activities—including reviewing RFIs, submittals, change orders, and contractor payment applications.Participate in internal QA/QC reviews to ensure accuracy and technical completeness., • Review contractor submittals, change orders, schedules, and payment applications as directed., • Conduct on-site engineering evaluations of roofs, façades, balconies, decks, structural framing, waterproofing systems, and building envelope components., • Perform field testing and documentation (moisture testing, probes, level checks, structural observations, etc.)., • Prepare detailed field sketches, measurements, and photographic documentation., • Observe repair work in progress to verify compliance with drawings, specifications, and industry standards., • Communicate observed deficiencies and corrective recommendations to senior engineers and project managers., • Attend client meetings with senior personnel, document meeting minutes and follow-up items., • Participate in discussions on scope, budget, and technical approach. Qualifications Licenses & Certifications • Entry Level PE (Structural) strongly preferred., • Additional Ideal candidates are actively pursuing Professional Engineer (PE)(Structural) licensure., • Building envelope certifications (IIBEC: RRO, RRC, RWC) or ICC certifications are a plus., • OSHA-10 preferred., • Valid United States Driver’s License required, as this position requires travel to and from client sites.Experience, • Bachelor’s degree in Civil Engineering, Structural Engineering, Architectural Engineering, or related field., • Understanding of construction plans, technical specifications, and industry standards., • Ability to identify typical structural defects, building envelope failures, moisture intrusion mechanisms, and waterproofing deficiencies., • Strong technical writing skills and attention to detail., • Ability to manage multiple projects concurrently and meet deadlines., • Knowledge of building codes, including IBC, IRC, and structural standards., • Professional, organized, and capable of fieldwork including ladders, attics, roofs, and difficult access areas., • Ability to work independently and collaboratively with engineers, architects, and construction professionals., • Familiarity with AutoCAD or similar drafting software is a plus. Physical Demands • Ability to lift up to 40 lbs., • Comfortable using ladders, lifts, scaffolds, and roof access equipment., • Ability to perform site work in extreme temperatures, humidity, and adverse weather., • Ability to work at heights up to 10 stories and in confined spaces (attics, crawlspaces)., • Significant standing/walking on uneven or challenging terrain. EMPLOYEE BENEFITS We offer competitive salaries, professional work environments and a comprehensive benefits package. Benefits include Group Medical, Dental and Vision, 401k with employer match, Supplemental Life Insurance, AD&D, Legal Plan, Pet Insurance, Critical Illness, Hospital Indemnity and Accident Plans, Paid Holidays, Vacation, Sick time, Cell Phone Reimbursement and Continuing Education Powered by JazzHR 3zS2GNNw0S

Job Description Scismic is supporting the growth of the most respected legacies in American industry, known for pioneering breakthroughs in optical technologies! With a proven history of industry firsts—including application-specific fibers, optical connectors, ribbon cables, erbium-doped fibers, Raman fiber lasers, and fiber gratings - Company is commited to delivering cutting-edge optical innovations and solutions by designing, manufacturing and supplying the high performance optical fibers, fiber cable and components and devices. Their mission is to advance communication technology while providing exceptional service that drives value for customers, employees, and shareholders. We seek 3 highly motivated and skilled R&D Engineers to support the company's optical fiber program in Somerset, NJ. Each engineer will fulfill one of the following focus areas: • Preform Assembly: Core focus - Stack and assemble glass preforms, operate latches, and maintain cleanliness in a cleanroom manufacturing process., • Junior Draw Tower: Core focus - Operate and monitor multi-floor draw tower equipment, support process runs, and maintain operational quality., • Senior Draw Tower: Core focus - Lead and drive draw tower programs, oversee experiments, and mentor junior team members. These roles offer the opportunity to advance optical fiber processing technology and have a significant impact on new product innovation. The ideal candidates will be responsible for equipment and process design and troubleshooting, and innovate in optical fiber fabrication techniques in collaboration with cross-functional teams at multiple locations. In this role, the candidates will support R&D programs to advance optical fiber science and technology for programs serving the medical, aerospace, and telecommunications industries. Essential duties and responsibilities include, but are not limited to: • Be a critical asset in leading an R&D program to advance optical fiber technology, including overseeing and contributing to development and innovation in optical fiber fabrication to improve performance, quality, reliability, and scalability., • Investigate the relationship between process parameters, fiber properties, and manufacturing outcomes, and guide technicians and engineers in conducting process trials and experiments to achieve project milestones., • Fabricate and characterize optical fibers to meet performance specifications and project requirements., • Conduct research, propose experiments, and analyze data to validate hypotheses and improve process understanding, particularly for troubleshooting fiber performance and quality as well as equipment and materials issues., • Manage, maintain, and upgrade mechanical and electronic facilities for optical fiber fabrication and testing, including automation, data logging, and fabrication records., • Collaborate with project teams to design and develop fabrication processes and facilities for fiber fabrication, particularly for novel fibers., • Stay informed of, and contribute to, advancements in fiber draw technology and integrate best practices in collaboration with global R&D, manufacturing, and engineering teams., • Communicate and document research findings through detailed technical reports and presentations., • Be a strong team player with openness and willingness to contribute toward group goals and achievements., • Perform other related duties as required to meet project and organizational needs. Key qualifications: • Preform Assembly – 2+ years of experience in a materials, mechanical, or manufacturing role. Ability to perform precision assembly work in a cleanroom environment., • Junior Draw Tower – Entry level to 2+ years of relevant technical experience preferred. Hands-on mechanical aptitude and willingness to learn complex manufacturing processes., • Senior Draw Tower – 5–10 years’ experience in optical fiber, glass processing, or similar manufacturing (flexible for exceptional candidates). Proven ability to design, analyze, and report experiments for complex process systems., • General requirement for all roles:, • Master’s (MSc) or Ph.D. in Physics, Mechanical or Chemical Engineering, Materials Science, or a similarly related field., • Proven expertise in developing and optimizing manufacturing processes, preferably in optical fiber or similar manufacturing., • Experience in designing, analyzing and reporting experiments for complex process systems. Knowledge and Experience Requirements: • Proficiency in data analysis, experimental design, and process optimization methods., • Understanding of high-temperature processes related to glass properties and material flow is an advantage., • Experience with fiber characterization techniques, including optical and mechanical property measurements., • Analytical and problem-solving skills to address complex process challenges and defects., • Leadership skills to guide technical teams and mentor junior staff effectively., • Collaboration skills to work with cross-functional teams and global partners., • Excellent technical writing and presentation skills for communicating research findings and process updates., • Strong organizational skills to manage multiple projects and prioritize tasks effectively., • Adaptability to work independently while supporting team objectives in a dynamic environment., • Passion for innovation and a strong drive to advance fiber draw processes and technologies. General Expectations: • Demonstrate effective communications (verbal, written) skills, • Proficient with MS Office Word and Excel, • Maintain discretion when working with confidential and proprietary information, • Strict adherence to Company safety policies and procedures, • Conform to all aspects of Company’ “Standards of Conduct” document Working at the company means having the opportunity to realize ideas, experience innovation and discover new solutions for the future. The company offers: • Dynamic work environment, • Competitive salaries, • Generous benefits programs, including medical, dental, tuition reimbursement, • Matching 401(k) plan Employees are expected to serve as role models for safe work practices and behaviors. This includes following established health and safety policies and procedures, maintaining a clean, organized work area, wearing, and properly storing all personal protective equipment (PPE), and actively engaging as a safety conscious worker with personal safety and wellness as a priority.

We are looking for a highly motivated and detail-oriented Business Analyst to join our Customer Experience team. This role is crucial in helping define the future of our online quoting platform. You will act as the key link between business stakeholders and the IT team, ensuring we deliver features that meet business demands and strategic objectives. This is an excellent opportunity for an entry-level professional with 1-2 years of relevant experience to grow their career in a dynamic, high-impact product, and collaborative environment. RESPONSIBILITIES • Collaborate with stakeholders to understand their needs, document requirements, and ensure that they are accurately captured and communicated, • Develop clear, concise, and comprehensive business requirements (BRDs, user stories, acceptance criteria, etc.) that clearly articulate the 'what' and 'why' for IT teams, • Assist in developing and maintaining product documentation including business requirements, process flows, and user stories, • Facilitate meetings, present findings, and communicate requirements and scope changes effectively to technical and non-technical audiences, • Track and evaluate key performance indicators (KPIs) across digital workflows and related platforms to identify trends and support process improvements, • Assist in the refinement, testing (UAT), deployment and documentation of new features, ensuring the delivered features meet the defined requirements QUALIFICATIONS • 1-2 years of professional experience in a business analyst, product support, or similar role., • Bachelor's degree in Business Administration, Information Technology, Finance, or a related field., • Ability to analyze complex information, understand business needs, and translate them into actionable requirements., • Excellent verbal and written communication skills, with a strong ability to produce clear and well-structured documentation., • Strong problem-solving skills and is detail oriented, • Proficiency in data analysis tools and techniques, • Has a proactive attitude, willingness to learn, ability to act as a team player, • Familiarity with the auto insurance industry or experience working on e-commerce/online sales platforms is a plus., • Experience with or understanding of the product development process is a plus SALARY RANGE The pay range for this position is $60,000 to $87,500 annually. Actual compensation will vary based on multiple factors, including employee knowledge and experience, role scope, business needs, geographical location, and internal equity. PERKS & BENEFITS • 4 weeks accrued paid time off + 9 paid national holidays per year, • Low cost and excellent coverage health insurance options that start on Day 1 (medical, dental, vision), • Annual 401(k) Employer Contribution, • Free onsite gym at our Woodbridge Location, • Resources to promote Professional Development (LinkedIn Learning and licensure assistance), • Robust health and wellness program and fitness reimbursements, • Various Paid Family leave options including Paid Parental Leave, • Tuition Reimbursement ABOUT THE COMPANY The Plymouth Rock Company and its affiliated group of companies write and manage over $2 billion in personal and commercial auto and homeowner’s insurance throughout the Northeast and mid-Atlantic, where we have built an unparalleled reputation for service. We continuously invest in technology, our employees thrive in our empowering environment, and our customers are among the most loyal in the industry. The Plymouth Rock group of companies employs more than 1,900 people and is headquartered in Boston, Massachusetts. Plymouth Rock Assurance Corporation holds an A.M. Best rating of “A-/Excellent”. #LI-DNI

Job Description Description The Kestra team has over 400 years of experience in the external and internal cardiac medical device markets. The company was founded in 2014 by industry leaders inspired by the opportunity to unite modern wearable technologies with proven device therapies. Kestra’s solutions combine high quality and technical performance with a wearable design that provides the greatest regard for patient comfort and dignity. Innovating versatile new ways to deliver care, Kestra is helping patients and their care teams harmoniously monitor, manage, and protect life. The ASSURE Patient Specialist (APS) conducts patient fitting activities in support of the sales organization and the team of Regional Clinical Advisors (RCA). The APS will serve as the local patient care representative to provide effective and efficient patient fittings. This is a paid per fitting position. Openings for Monmouth, Middlesex and surrounding counties. Requirements ESSENTIAL DUTIES • Act as a contractor ASSURE® Patient Specialist (APS) to fit and train local patients with a wearable defibrillator via training assignments dispatched from corporate headquarters. The APS will be trained and Certified as an ASSURE Patient Specialist by Kestra., • Ability to provide instruction and instill confidence in Assure® patients with demonstrated patient care skills, • Willingness to contact prescribers, caregivers and patients to schedule services, • Ability to accept an assignment that could include daytime, evening, and weekend hours, • Travel to hospitals, patient’s homes and other healthcare facilities to provide fitting services, • Measure the patient to determine the correct garment size, • Review and transmit essential paperwork with the patient to receive the Assure® garment and services, • Manage inventory of the Assure® system kits, garments, and electronic equipment used in fittings, • Flexibility of work schedule and competitive pay provided, • Adhere to Pledge of Confidentiality, • Passion: Contagious excitement about the company – sense of urgency. Commitment to continuous improvement., • Integrity: Commitment, accountability, and dedication to the highest ethical standards., • Collaboration/Teamwork: Inclusion of Team Member regardless of geography, position, and product or service., • Action/Results: High energy, decisive planning, timely execution., • Innovation: Generation of new ideas from original thinking., • Customer Focus: Exceed customer expectations, quality of products, services, and experience always present of mind., • Emotional Intelligence: Recognizes, understands, manages one’s own emotions and is able to influence others. A critical skill for pressure situations., • Highly organized, service and detail orientated, • Passionate about the heart-failure space and a strong desire to make a difference, • Strong interpersonal skills with communicating and assisting clinicians with providing care for patients., • 1 year in a paid patient care experience (not as a family care giver), • Clinical or engineering background which may include but is not limited to nurses, cardiac device sales representatives, clinical engineers, catheterization lab technicians, physician assistants, or ECG technicians., • Disclosure of personal NPI number (if applicable), • Completion of background check. Florida and Ohio must complete a level 2 screening paid for by Kestra., • Willingness to pay an annual DME fee which is deducted from the completed work order, • Ability to pay for vendor credentialing upfront during a 90-day probationary period, • Experience in patient and/or clinician education, • Valid driver’s license in state of residence with a good driving record, • Ability to consistently work remotely Disclosures are required for any potential relationships and referral sources, • Must be able to achieve credentialing for hospital system entry including, but not limited to:, • Documentation of vaccination and immunization status, • Pass background check, • Pass drug screening testing, • Review and agree to hospital policies and procedures, • Knowledge of MS Office, Excel, PowerPoint, MS Teams, • Variable conditions during travel, • Minimal noise volume typical to an office or hospital environment, • Possible environmental exposure to infectious disease (hospital and clinic settings), • Extended hours when needed, • Ability to travel by car, • Frequent repetitive motions that may include wrists, hands and/or fingers, such as keyboard and mouse usage, • Frequent stationary position, often standing or sitting for prolonged periods of time, • Frequent computer use, • Frequent phone and other business machine use, • Occasional bending and stooping This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the Team Member. Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice.

Entry Level) Communications Specialist.Army is at the forefront of communications technology and bolsters one of the most robust communications networks on the planet.As a communications technician in 1 of the 25 Army technical communications careers you will be operating at the highest level of sec

Job DescriptionDescriptionCME Associates is currently recruiting for a Senior Program Manager to join their team of professionals in our Municipal Engineering Department. The Senior Program Manager is responsible for overseeing multiple related projects within an organization and various clients to ensure they align with business objectives, are executed effectively, and deliver the expected value. The senior program manager will operate as a senior leader within the company supporting staff and project managers deliver high quality products for our clients. They will be responsible for running teams between 3 to 15+ people varying on scope and owning the relationship for a client while engaging in business development activities that generate new revenue. Responsibilities • Ensure that all projects within the program are aligned with strategic priorities i.e. profitability, revenue growth, and resource management., • Responsible for the development of project plans, timelines, and budgets for specific projects assigned to them with little to no supervision., • Facilitate communication between team members, stakeholders, and clients to ensure everyone is aligned with project objectives and timelines., • Monitor project portfolio to ensure objectives are being satisfied and provide timely advice to the Manager/Client on any anticipated delays affecting project commitments., • Owns the progress of projects, ensuring that tasks are completed on time and within budget and is responsible for escalating when project metrics are at risk., • Responsible for the relationships and health of clients., • Works with senior leadership to develop and guide business development activities for achieving growth targets in assigned areas and clients., • Assist in allocating resources effectively, ensuring that tasks are completed on time and within budget and communicating with leadership when required for additional resources., • Review of Site Plan and Subdivision applicants submitted to Municipal Land Use Boards and attend Municipal Planning Board, Zoning Board of Adjustment, and Council Meetings, when required by management or client., • Coordinate client needs and internal resources and teams to effectively uphold high quality delivery of projects to our clients., • Apply technical skills required to manage the project and support the staff, e.g. storm water, hydraulics, grading, land use planning, structural analysis, etc., • Consider health, safety and environmental requirements when developing civil designs., • Monitor and track project portfolio’s expenses to ensure that the project stays within the allocated budget., • Ensure that project milestones and deliverables are achieved on schedule and within scope., • Regularly communicate project status, issues, risks, and changes to stakeholders and senior management., • Act as the primary point of contact for clients, ensuring their needs are met and concerns addressed promptly., • Lead, motivate, and mentor project teams, ensuring collaboration and high performance., • Oversee or manage staff to ensure quality control checks to ensure deliverables meet project specifications and client expectations., • Serve as the main point of contact for stakeholders, providing regular updates and addressing concerns., • Engage in CME activities as a senior leader, going above and beyond to ensure the future success of junior staff are set up for success. Qualifications • Bachelor’s degree in engineering, Environmental Science, Surveying, Construction Management, or related disciplines., • Professional Engineer (PE) or equivalent professional license required., • 10+ years of experience in design, construction, or equivalent experience., • 10+ years of experience managing and assisting in project management or client management., • Certified Municipal Engineer (CME), preferredPreferred Qualifications:, • Advanced proficiency in scheduling, resource allocation, and progress tracking., • Proficiency in creating advanced Gantt charts, reporting dashboards, and resource management., • Organizing workflows and visualizing project tasks, particularly for smaller or less complex projects., • Knowledge of cost estimation techniques and software., • Entry level understanding KPIs (Key Performance Indicators) for tracking project progress., • Basic knowledge of AutoCAD or MicroStation if managing design aspects of engineering projects., • Familiarity with software for managing quality audits and compliance., • Proficiency with Microsoft Teams for team communication and updates., • Experience with SharePoint or similar platforms to manage project documents, blueprints, and specifications., • Basic knowledge of contract law and understanding of contract management tools for reviewing contracts and monitoring deliverables., • Knowledge of safety regulations as OSHA.

Job Description An international plant-based food manufacturing company is seeking a Maintenance Mechanic. 3+ years of experience as a mechanic (food manufacturing preferred but not required) • $23 - 25/hr. plus full benefits, • Somerset, NJ Requirements of the Maintenance Mechanic: • Boiler operation experience (high‐pressure preferred), • Good at problem‐solving and multitasking, • Clear communication and attention to detail, • Can read electrical, pneumatic, hydraulic, and mechanical schematics, • Experience replacing motors, belts, bearings, pulleys, sprockets, chains, cylinders, etc., • Skills in plumbing, wiring, welding, and drilling, • Basic knowledge of Microsoft Word, Excel, PowerPoint, Outlook, and Teams Responsibilities of the Maintenance Mechanic: • Follow safety rules and ensure all maintenance meets standards, • Perform preventive maintenance to keep machines running smoothly, • Organize, assign, and oversee technical staff tasks, • Troubleshoot and inspect production equipment, • Complete work orders for service, modifications, or installations, • Improve equipment performance and efficiency, • Keep the workplace safe and clean, • Work well with team members, • Manage parts inventory and procurement, • Build and maintain relationships with service providers and suppliers Employment Type: Direct Hire Schedule: Monday, Wednesday – Saturday 07:00 a.m. – 04:00 p.m. (Tuesday and Sunday off) During probation Monday – Friday 08:00 a.m. – 05:00 p.m. (if possible) Maintenance mechanic, boiler, high-pressure boiler, electrical schematics, pneumatic schematics, hydraulic schematics, mechanical schematics, plumbing Company DescriptionFor over twenty years, TriCom Quest has been a leader in the employment consultant industry, providing staffing services for both employers and job seekers, at virtually every level - from entry to executive. Our service spans the United States, providing placements for a broad range of companies, including those headquartered in the Pacific Rim with satellite offices within the United States. Yet what makes us stand out from the employment "crowd" is our service. Whether you're hiring employees or in search of a job, TriCom Quest is committed to quality service, from the very first handshake to placement, and beyond.For over twenty years, TriCom Quest has been a leader in the employment consultant industry, providing staffing services for both employers and job seekers, at virtually every level - from entry to executive. Our service spans the United States, providing placements for a broad range of companies, including those headquartered in the Pacific Rim with satellite offices within the United States. Yet what makes us stand out from the employment "crowd" is our service. Whether you're hiring employees or in search of a job, TriCom Quest is committed to quality service, from the very first handshake to placement, and beyond.

Job DescriptionDescription: Software Support Technician - Entry Level Iselin New Jersey Software Support Technician- Entry Level WHO WE ARE: Celerant Technology Corporation is a leading provider of premium, advanced retail management software for retail organizations. Our software, developed in-house, manages all areas of the retail business including point of sale, inventory management, warehouse, distribution, allocation, e-commerce, sales back office, advanced reporting and more. We give retailers the capabilities necessary to run their operation both efficiently and profitably. Celerant is a successful software company that is rapidly expanding. The main headquarters are located in Staten Island, New York, as well as additional satellite offices in Georgia, Oklahoma, Texas and California. Celerant's staff consists of several departments including Marketing, Sales, Development, Quality Assurance Testing, Hardware, Implementation and Training, and Technical Support. For more information, visit us at . The ideal Technical Support candidate should be detailed orientated, possess the ability to work effectively with co-workers and end users, and exhibit outstanding customer service skills. RESPONSIBILITIES: • Answer phone calls and email inquiries from users and provide technical support/guidance to resolve issues., • Log all incidents into the department call tracking system as per departmental standards., • Assist in the creation of knowledge base articles as they pertain to the present and future environment, • Work on unresolved issues from evening and weekend shifts., • Escalate any possible wide spread issues to the Technical Support Manager as identified by e.g., high volume of calls pertaining to a similar issue, etc., • Support Implementation/Training Team with any customer issues. SKILL REQUIREMENTS: • BA or equivalent degree in Computer Science, Information Technology, or related field. • Basic SQL knowledge preferred., • Relational database experience is a plus. Requirements: RESPONSIBILITIES: • Answer phone calls and email inquiries from users and provide technical support/guidance to resolve issues., • Log all incidents into the department call tracking system as per departmental standards., • Assist in the creation of knowledge base articles as they pertain to the present and future environment, • Work on unresolved issues from evening and weekend shifts., • Escalate any possible wide spread issues to the Technical Support Manager as identified by e.g., high volume of calls pertaining to a similar issue, etc., • Support Implementation/Training Team with any customer issues. SKILL REQUIREMENTS: • BA or equivalent degree in Computer Science, Information Technology, or related field. • Basic SQL knowledge preferred., • Relational database experience is a plus.