Trabajos extreme en Hicksville, New YorkCrear alertas

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio! IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: Knowledge and ability to perform Preventative Maintenance services with general knowledge related to heavy duty and light duty trucks. This may include gasoline, diesel and CNG Systems. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Aid/assist drivers in completion of the daily Post trip and vehicle safety inspection process, • Conducts safety checks on vehicles and equipment during Safety Lane and PM's., • Complete lubrication and repair of lubrication points on vehicles as assigned on the daily schedule, • Ability to learn and utilize brake inspection procedures and complete documentation daily, • Perform basic repairs and maintenance on Heavy Duty Equipment, including but not limited to Rear Load, Front Load, Roll Off, Grapple, Port-a-let, and other service type trucks including chassis and body., • Communication with A & B technicians /drivers as to issues with vehicles and discusses preventative techniques that may minimize future repairs., • Completes all required paperwork / computer data entry, including documenting parts usage and time in and out on repair orders, in a timely and concise manner., • Maintains a clean, safe work area in compliance with corporate and OSHA standards which may include sweeping, organizing and maintaining the shop and grounds areas., • Conducts repairs utilizing Factory Service Manuals., • Maintain high standard of Ethics and Dependability., • Follows all safety policies and procedures. Requirements and Qualifications::, • Ability to assist drivers with Pre/Post trip process, • Ability to identify visible repairs required on vehicles: lights, mirrors, leaks, body damage etc., • Ability to assist/complete fluid top up on vehicles including oil, hydraulic fluids, transmission fluid, DEF fluid, • Knowledge of tire inspections and air pressure adjustments, • Ability to support technicians in repair of lights, wipers, mirrors., • Ability to understand and use lubrication charts for waste trucks, • Ability to lubricate components on trucks as scheduled (training provided), • Ability to assist technicians in the repair of basic engine, transmission, brake, suspension, electrical, hydraulic, body components and systems related to Heavy Duty and Light Duty Trucks., • Knowledge of all tools required to perform repairs and maintenance on vehicles., • Basic computer skills as required. OTHER JOB RESPONSIBILITIES: • Employees in this job classification must attend and participate in corporation sponsored training courses as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. • Employees in this job classification are responsible for keeping up to date on current technology, as job appropriate, • Any additional job duties that may be assigned by the Supervisor., • Exposure to chemical and residential waste., • Walking, Jogging, Twisting, Crouching, Lifting, • Sufficient stamina for steady work pace throughout the day, • Able to utilize all Personal Protective Equipment as mandated by company, • Physically able to get up and down from the cab of a commercial motor vehicle between 50 and 100 times a day, • Physically able to lift 50 to 75 pounds from the floor to waist height unassisted, • Physically able to lift 50 pounds from the floor to shoulder height unassisted, • Physically able to lift 50 pounds form the floor to overhead unassisted, • Physically able to push and pull 50 pounds unassisted, • Physically able to frequently (100-200 times) bend at the knees and waist, • Physically able to frequently (100-200 times) reach over your head or reach out with extended arms to perform work, • Physically able to frequently (100-200 times) twist at the waist to perform work, • Physically able to work in extreme temperatures and weather environments (road calls). WORK ENVIRONMENT: • Normal setting for this job is: Inside and Outside with occasional exposure to extreme weather conditions. Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $27.00/Hr. Salary Range Maximum: USD $37.00/Hr.

Does this position interest you? You should apply – even if you don’t match every single requirement! We're known as an auto glass company. That's the focus of what we do. But beyond the glass, we're so much more. We'll help you build a fulfilling career and encourage you to have a life. Let us be the best place you'll ever work. A Brief Overview A Technician Trainee will be trained and educated to become a proficient auto glass technician. Upon completing our training program, the trainee will receive the Safelite SafeTech certification and will possess fundamental skills necessary for performing unsupervised glass repair, replacement and recalibrations. The trainee is expected to embody the Safelite Spirit with a can-do attitude, caring heart and service mindset while striving to bring unexpected happiness to customers by completing jobs timely and with the highest quality standards. What you will do • Be paid to learn and apprentice the Safelite way, through hands-on and classroom training, including:, • Observing and assisting in installing and repairing auto glass, • Recalibrating automotive safety systems, including trouble-shooting and completing diagnostic testing, • Providing additional services & products, • Study and pass testing to become a Safelite-certified Technician showing proficiency in installations, embracing a positive attitude and following taught techniques., • Safely operate company and customer vehicles, company-issued tools and chemicals utilized throughout the workday., • Performs other duties as assigned, • Complies with all policies and standards What you’ll get: • Competitive weekly pay starting at $25.50/hour, increasing to $30.25/hour after training and certification., • A benefits package valued at more than $10k*. Includes 401(k) plan with company matching, medical plans, paid time off, holidays & volunteer days., • Program to buy additional PTO or sell unused time up to 16 hours., • Up to $5,250 annually in tuition reimbursement., • Paid training and all the tools and resources you'll need to be successful., • View all our health, wealth, and life offerings at www.safelitebenefits.com. Education Qualifications • High School Diploma GED/Equivalent Preferred, • Valid state-issued driver’s license any other license(s) (as required by federal, state and local laws) to operate a company vehicle. Required Experience Qualifications • Must be 18 years of age or older Required Skills and Abilities • Ability to regularly lift and carry up to 35 pounds and occasionally lift and carry up to 50 pounds., • Ability to stand for extended periods, work in tight spaces, bend and twist body, • Ability to use a variety of hand tools and power tools safely and effectively, • Ability to operate a motor vehicle in accordance with all federal, state and local laws and agreement to be monitored via in-cab vehicle safety camera / video surveillance technology, • Maintains professionalism and passion for providing outstanding customer service and exceeding customer expectations, • Ability to safely work outside (in a wide variety of weather conditions and extreme temperatures) for extended periods, • Ability to work with chemicals (including but not limited to flammable chemicals), as applicable per the “Safelite Way of Fitting”, • Ability to work scheduled days, with flexibility on start and end times to accommodate customer’s needs, • Proficiency in using computerized diagnostic tools to complete recalibrations and trouble-shoot issues, • Problem-solving and ability to trouble-shoot issues, independently and collaboratively, • Ability to read, write and interpret the English language and technical directions, • Ability to communicate orally (via phone) and written (via computer or other electronic means), • Ability to maintain a professional appearance, adhering to Company dress code and PPE policies, • Willingness and ability to maintain stable performance under professional or personal pressure and/or opposition (e.g., time pressure and productivity measures). LI-JF1 This job description in no way states or implies that these are the only duties to be performed by an employee occupying this position. Employees may be required to perform other related duties as assigned to ensure workload coverage. This job description does NOT constitute an employment agreement between the employer and employee and is subject to change by the employer as the organizational needs and requirements of the job change. This position description is not all inclusive for every aspect of this role. Reasonable accommodations will be made for individuals covered by ADA, ADEA, FMLA and other laws and regulations in accordance with their requirements. Physical and mental demands are not, and should not be construed to be job qualification standards, but are illustrated to help the employer, employee and/or applicant identify tasks where reasonable accommodations may need to be made when an otherwise qualified person is unable to perform the job’s essential duties because of an ADA disability. Other qualifications may be required to ensure employment eligibility in accordance with local laws, regulations and with Safelite Group, Inc. policies and practices. -- Internal Associates: Already a member of the Safelite team? Apply through your Workday account by searching "Find Open Jobs". Diversity: Safelite welcomes everyone. We value our diverse workforce and suppliers, and we’re proud to be an equal opportunity employer. Learn more at Careers http://safelite.com/Careers Benefit amounts are estimates only. Actual values will depend on benefit elections during enrollment. This position description is not all inclusive for every aspect of this role. Reasonable accommodation will be made for individuals covered by ADA, ADEA, FMLA and other laws and regulations in accordance with their requirements. Physical and mental demands are not and should not be construed to be job qualification standards, but are illustrated to help the employer, employee and/or applicant identify tasks where reasonable accommodations may need to be made when an otherwise qualified person is unable to perform the job’s essential duties because of an ADA disability.

Does this position interest you? You should apply – even if you don’t match every single requirement! We're known as an auto glass company. That's the focus of what we do. But beyond the glass, we're so much more. We'll help you build a fulfilling career and encourage you to have a life. Let us be the best place you'll ever work. A Brief Overview A Technician Trainee will be trained and educated to become a proficient auto glass technician. Upon completing our training program, the trainee will receive the Safelite SafeTech certification and will possess fundamental skills necessary for performing unsupervised glass repair, replacement and recalibrations. The trainee is expected to embody the Safelite Spirit with a can-do attitude, caring heart and service mindset while striving to bring unexpected happiness to customers by completing jobs timely and with the highest quality standards. What you will do • Be paid to learn and apprentice the Safelite way, through hands-on and classroom training, including:, • Observing and assisting in installing and repairing auto glass, • Recalibrating automotive safety systems, including trouble-shooting and completing diagnostic testing, • Providing additional services & products, • Study and pass testing to become a Safelite-certified Technician showing proficiency in installations, embracing a positive attitude and following taught techniques., • Safely operate company and customer vehicles, company-issued tools and chemicals utilized throughout the workday., • Performs other duties as assigned, • Complies with all policies and standards What you’ll get: • Competitive weekly pay starting at $25.50/hour, increasing to $30.25/hour after training and certification., • A benefits package valued at more than $10k*. Includes 401(k) plan with company matching, medical plans, paid time off, holidays & volunteer days., • Program to buy additional PTO or sell unused time up to 16 hours., • Up to $5,250 annually in tuition reimbursement., • Paid training and all the tools and resources you'll need to be successful., • View all our health, wealth, and life offerings at www.safelitebenefits.com. Education Qualifications • High School Diploma GED/Equivalent Preferred, • Valid state-issued driver’s license any other license(s) (as required by federal, state and local laws) to operate a company vehicle. Required Experience Qualifications • Must be 18 years of age or older Required Skills and Abilities • Ability to regularly lift and carry up to 35 pounds and occasionally lift and carry up to 50 pounds., • Ability to stand for extended periods, work in tight spaces, bend and twist body, • Ability to use a variety of hand tools and power tools safely and effectively, • Ability to operate a motor vehicle in accordance with all federal, state and local laws and agreement to be monitored via in-cab vehicle safety camera / video surveillance technology, • Maintains professionalism and passion for providing outstanding customer service and exceeding customer expectations, • Ability to safely work outside (in a wide variety of weather conditions and extreme temperatures) for extended periods, • Ability to work with chemicals (including but not limited to flammable chemicals), as applicable per the “Safelite Way of Fitting”, • Ability to work scheduled days, with flexibility on start and end times to accommodate customer’s needs, • Proficiency in using computerized diagnostic tools to complete recalibrations and trouble-shoot issues, • Problem-solving and ability to trouble-shoot issues, independently and collaboratively, • Ability to read, write and interpret the English language and technical directions, • Ability to communicate orally (via phone) and written (via computer or other electronic means), • Ability to maintain a professional appearance, adhering to Company dress code and PPE policies, • Willingness and ability to maintain stable performance under professional or personal pressure and/or opposition (e.g., time pressure and productivity measures). LI-JF1 This job description in no way states or implies that these are the only duties to be performed by an employee occupying this position. Employees may be required to perform other related duties as assigned to ensure workload coverage. This job description does NOT constitute an employment agreement between the employer and employee and is subject to change by the employer as the organizational needs and requirements of the job change. This position description is not all inclusive for every aspect of this role. Reasonable accommodations will be made for individuals covered by ADA, ADEA, FMLA and other laws and regulations in accordance with their requirements. Physical and mental demands are not, and should not be construed to be job qualification standards, but are illustrated to help the employer, employee and/or applicant identify tasks where reasonable accommodations may need to be made when an otherwise qualified person is unable to perform the job’s essential duties because of an ADA disability. Other qualifications may be required to ensure employment eligibility in accordance with local laws, regulations and with Safelite Group, Inc. policies and practices. -- Internal Associates: Already a member of the Safelite team? Apply through your Workday account by searching "Find Open Jobs". Diversity: Safelite welcomes everyone. We value our diverse workforce and suppliers, and we’re proud to be an equal opportunity employer. Learn more at Careers http://safelite.com/Careers Benefit amounts are estimates only. Actual values will depend on benefit elections during enrollment. This position description is not all inclusive for every aspect of this role. Reasonable accommodation will be made for individuals covered by ADA, ADEA, FMLA and other laws and regulations in accordance with their requirements. Physical and mental demands are not and should not be construed to be job qualification standards, but are illustrated to help the employer, employee and/or applicant identify tasks where reasonable accommodations may need to be made when an otherwise qualified person is unable to perform the job’s essential duties because of an ADA disability.

Does this position interest you? You should apply – even if you don’t match every single requirement! We're known as an auto glass company. That's the focus of what we do. But beyond the glass, we're so much more. We'll help you build a fulfilling career and encourage you to have a life. Let us be the best place you'll ever work. A Brief Overview The Peak Season Repair Specialist serves as a pathway to full-time employment with Safelite. In this role you will utilize our industry-leading technology to complete vehicle glass repairs. You will champion the Safelite Spirit with your can-do attitude, caring heart, and service mindset while striving to bring unexpected happiness to your customers by completing jobs with only the highest quality standard in mind. What you will do • Learn to repair vehicle glass (in the classroom and hands on) with a focus on the Safelite Way of Fitting under the guidance of experienced technicians and Safelite leaders., • Repair chips, cracks and other auto glass related issues on customer vehicles., • Manage work orders, customer documentation and customer communication through the Safelite handheld Mobile Resource Management (MRM) technology. Promote and sell Safelite promotional items to customers., • Clean customer vehicle during wait/idle time during the repair process as well as perform additional housekeeping tasks in company vehicle and shop., • Safely operate company and customer vehicles, company-issued tools and chemicals utilized throughout the workday., • Performs other duties as assigned, • Complies with all policies and standards What You’ll Get • Competitive weekly base pay starting at $21.75/hour. Education Qualifications • High School Diploma GED/Equivalent Preferred, • Valid state-issued driver’s license and any other licenses (as required by federal, state and local laws) to operate a company vehicle. Required, • On-the-job training/completion of Safelite SafeTech™ certification. Required Experience Qualifications • Must be 18 years of age or older. Skills and Abilities • Lifting and carrying up to 25 lbs. for short periods, assist an associate with lifting windshields weighing 26 lbs. to 50 lbs., • Ability to stand for extended periods, work in tight spaces, bend and twist body, • Ability to use a variety of hand tools and power tools safely and effectively, • Ability to operate a motor vehicle in accordance with all federal, state and local laws and agreement to be monitored via camera / video surveillance, • Maintains professionalism and passion for providing outstanding customer service and exceeding customer expectations, • Ability to safely work outside (in a variety of weather conditions and extreme temperatures) for extended periods, • Ability to work with chemicals (including but not limited to flammable chemicals), as applicable per the “Safelite Way of Fitting”, • Ability to work scheduled days, with flexibility on start and end times to accommodate customer’s needs, • Problem-solving and ability to trouble-shoot issues, independently and collaboratively, • Ability to read, write and interpret the English language and technical directions, • Ability to communicate orally (via phone) and written (via computer or other electronic means), • Ability to maintain a professional appearance, adhering to Company uniform and PPE policies, • Willingness and ability to maintain stable performance under professional or personal pressure and/or opposition (e.g., time pressure and productivity measures) This position involves driving duties that will be monitored through the use of cameras, GPS, and other tracking technologies to ensure safety and compliance. This job description in no way states or implies that these are the only duties to be performed by an employee occupying this position. Employees may be required to perform other related duties as assigned to ensure workload coverage. This job description does NOT constitute an employment agreement between the employer and employee and is subject to change by the employer as the organizational needs and requirements of the job change. This position description is not all inclusive for every aspect of this role. Reasonable accommodations will be made for individuals covered by ADA, ADEA, FMLA and other laws and regulations in accordance with their requirements. Physical and mental demands are not, and should not be construed to be job qualification standards, but are illustrated to help the employer, employee and/or applicant identify tasks where reasonable accommodations may need to be made when an otherwise qualified person is unable to perform the job’s essential duties because of an ADA disability. Other qualifications may be required to ensure employment eligibility in accordance with local laws, regulations and with Safelite Group, Inc. policies and practices. This job description in no way states or implies that these are the only duties to be performed by an employee occupying this position. Employees may be required to perform other related duties as assigned to ensure workload coverage. This job description does NOT constitute an employment agreement between the employer and employee and is subject to change by the employer as the organizational needs and requirements of the job change. This position description is not all inclusive for every aspect of this role. Reasonable accommodations will be made for individuals covered by ADA, ADEA, FMLA and other laws and regulations in accordance with their requirements. Physical and mental demands are not, and should not be construed to be job qualification standards, but are illustrated to help the employer, employee and/or applicant identify tasks where reasonable accommodations may need to be made when an otherwise qualified person is unable to perform the job’s essential duties because of an ADA disability. Other qualifications may be required to ensure employment eligibility in accordance with local laws, regulations and with Safelite Group, Inc. policies and practices. -- Internal Associates: Already a member of the Safelite team? Apply through your Workday account by searching "Find Open Jobs". Diversity: Safelite welcomes everyone. We value our diverse workforce and suppliers, and we’re proud to be an equal opportunity employer. Learn more at Careers http://safelite.com/Careers Benefit amounts are estimates only. Actual values will depend on benefit elections during enrollment. This position description is not all inclusive for every aspect of this role. Reasonable accommodation will be made for individuals covered by ADA, ADEA, FMLA and other laws and regulations in accordance with their requirements. Physical and mental demands are not and should not be construed to be job qualification standards, but are illustrated to help the employer, employee and/or applicant identify tasks where reasonable accommodations may need to be made when an otherwise qualified person is unable to perform the job’s essential duties because of an ADA disability.

Does this position interest you? You should apply – even if you don’t match every single requirement! We're known as an auto glass company. That's the focus of what we do. But beyond the glass, we're so much more. We'll help you build a fulfilling career and encourage you to have a life. Let us be the best place you'll ever work. A Brief Overview A Technician Trainee will be trained and educated to become a proficient auto glass technician. Upon completing our training program, the trainee will receive the Safelite SafeTech certification and will possess fundamental skills necessary for performing unsupervised glass repair, replacement and recalibrations. The trainee is expected to embody the Safelite Spirit with a can-do attitude, caring heart and service mindset while striving to bring unexpected happiness to customers by completing jobs timely and with the highest quality standards. What you will do • Be paid to learn and apprentice the Safelite way, through hands-on and classroom training, including:, • Observing and assisting in installing and repairing auto glass, • Recalibrating automotive safety systems, including trouble-shooting and completing diagnostic testing, • Providing additional services & products, • Study and pass testing to become a Safelite-certified Technician showing proficiency in installations, embracing a positive attitude and following taught techniques., • Safely operate company and customer vehicles, company-issued tools and chemicals utilized throughout the workday., • Performs other duties as assigned, • Complies with all policies and standards What you’ll get: • Competitive weekly pay starting at $25.50/hour, increasing to $30.25/hour after training and certification., • A benefits package valued at more than $10k*. Includes 401(k) plan with company matching, medical plans, paid time off, holidays & volunteer days., • Program to buy additional PTO or sell unused time up to 16 hours., • Up to $5,250 annually in tuition reimbursement., • Paid training and all the tools and resources you'll need to be successful., • View all our health, wealth, and life offerings at www.safelitebenefits.com. Education Qualifications • High School Diploma GED/Equivalent Preferred, • Valid state-issued driver’s license any other license(s) (as required by federal, state and local laws) to operate a company vehicle. Required Experience Qualifications • Must be 18 years of age or older Required Skills and Abilities • Ability to regularly lift and carry up to 35 pounds and occasionally lift and carry up to 50 pounds., • Ability to stand for extended periods, work in tight spaces, bend and twist body, • Ability to use a variety of hand tools and power tools safely and effectively, • Ability to operate a motor vehicle in accordance with all federal, state and local laws and agreement to be monitored via in-cab vehicle safety camera / video surveillance technology, • Maintains professionalism and passion for providing outstanding customer service and exceeding customer expectations, • Ability to safely work outside (in a wide variety of weather conditions and extreme temperatures) for extended periods, • Ability to work with chemicals (including but not limited to flammable chemicals), as applicable per the “Safelite Way of Fitting”, • Ability to work scheduled days, with flexibility on start and end times to accommodate customer’s needs, • Proficiency in using computerized diagnostic tools to complete recalibrations and trouble-shoot issues, • Problem-solving and ability to trouble-shoot issues, independently and collaboratively, • Ability to read, write and interpret the English language and technical directions, • Ability to communicate orally (via phone) and written (via computer or other electronic means), • Ability to maintain a professional appearance, adhering to Company dress code and PPE policies, • Willingness and ability to maintain stable performance under professional or personal pressure and/or opposition (e.g., time pressure and productivity measures). LI-JF1 This job description in no way states or implies that these are the only duties to be performed by an employee occupying this position. Employees may be required to perform other related duties as assigned to ensure workload coverage. This job description does NOT constitute an employment agreement between the employer and employee and is subject to change by the employer as the organizational needs and requirements of the job change. This position description is not all inclusive for every aspect of this role. Reasonable accommodations will be made for individuals covered by ADA, ADEA, FMLA and other laws and regulations in accordance with their requirements. Physical and mental demands are not, and should not be construed to be job qualification standards, but are illustrated to help the employer, employee and/or applicant identify tasks where reasonable accommodations may need to be made when an otherwise qualified person is unable to perform the job’s essential duties because of an ADA disability. Other qualifications may be required to ensure employment eligibility in accordance with local laws, regulations and with Safelite Group, Inc. policies and practices. -- Internal Associates: Already a member of the Safelite team? Apply through your Workday account by searching "Find Open Jobs". Diversity: Safelite welcomes everyone. We value our diverse workforce and suppliers, and we’re proud to be an equal opportunity employer. Learn more at Careers http://safelite.com/Careers Benefit amounts are estimates only. Actual values will depend on benefit elections during enrollment. This position description is not all inclusive for every aspect of this role. Reasonable accommodation will be made for individuals covered by ADA, ADEA, FMLA and other laws and regulations in accordance with their requirements. Physical and mental demands are not and should not be construed to be job qualification standards, but are illustrated to help the employer, employee and/or applicant identify tasks where reasonable accommodations may need to be made when an otherwise qualified person is unable to perform the job’s essential duties because of an ADA disability.

Company Overview: MaxSolar is a leading provider of Operations & Maintenance (O&M), Asset Management and Technical Services for solar photovoltaic and battery storage systems in the commercial marketplace. As a comprehensive services provider, MaxSolar supports client needs throughout the entire project life cycle. Our programs ensure that system owners receive the maximum energy, environmental, and financial benefits from their assets. Position Overview: The Field Technician is required to troubleshoot and resolve solar PV and battery storage system issues, including emergency repairs/corrective maintenance, design change requirements, and equipment modifications/upgrades. Position will also be responsible for Preventative Maintenance activities to support system performance of O&M portfolio, as well as, QA/QC inspections, system commissioning and pre-con site assessments. Responsibilities: As a Solar Technician/Electrician within the Operations and Maintenance team, you will play a critical role in ensuring the safe, efficient, and reliable performance of solar energy systems. Key responsibilities include: • Performing routine maintenance, inspections, and system checks on solar equipment to ensure optimal performance., • Operating, maintaining, troubleshooting, and repairing equipment issues identified during inspections or daily operations., • Conducting electrical testing, measurements, and diagnostics to identify and resolve electrical issues., • Utilizing a basic understanding of system monitoring platforms to review and analyze performance data, identify trends, and flag potential concerns., • Preparing formal documentation of all field activities, task procedures, and maintenance actions., • Adhering to all safety protocols, company policies, and industry standards., • Providing technical guidance and support to junior technicians as needed., • Demonstrating strong attention to detail in all aspects of work., • Assisting with QA/QC activities, commissioning of new solar installations, and site assessments., • Managing preventive maintenance tasks and deliverables, including independently performing basic electrical tasks., • Conducting advanced testing and troubleshooting, including work on electrically live devices when required and permitted., • Performing lockout/tagout (LOTO) procedures in accordance with established guidelines and safely releasing systems for troubleshooting., • Executing work instructions for both electrical and mechanical repairs on on-site equipment., • Working within distribution-level systems up to 600 VAC and within PV array limits up to 1000 VDC., • Applying low-voltage test equipment, including conducting pre- and post-use inspections, safely connecting instruments, and interpreting test results. Qualifications: • Associates Degree in Engineering or equivalent Technical Certification/Training, • Licensed Electrician and NABCEP certification preferred., • Valid Driver’s license with clean record., • One (1) year minimum experience installing/maintaining commercial scale battery storage systems preferred., • Ability to work remotely and independently., • Project management/field operations management experience preferred., • Previous experience working with power electronic conversion equipment., • Experience with metering and test equipment., • Experience with centralized DAS/SCADA/EMS control systems., • Working knowledge of Commercial Power Plant Operations., • Ability to read electrical/mechanical drawings, equipment manuals and technical specifications., • Familiarity with CMMS based work order/ticketing systems and mobile reporting tools., • Working knowledge of NEC and local building codes and OSHA safety standards (OSHA 30 preferred)., • Ability to efficiently troubleshoot system failures., • Proficient with the use of the Microsoft Office Suite (Word, Excel, PowerPoint, Outlook)., • Must be willing and able to climb ladders, stairs and work on rooftops., • Ability to work in extreme weather conditions. Benefits: • Competitive salary and performance-based incentives, • Health, dental, and vision insurance, • Retirement savings plan, • Opportunities for professional development and career advancement

Location US-CA-Irvine | US-NJ-Burlington | US-CA-Glendale | US-NY-Melville Company Canon U.S.A., Inc. Requisition ID 34036 Category Sales Support Position Type Full-Time Workstyle Hybrid Canon USA in Melville, NY is currently seeking a Data Analytics Analyst (Analyst, Data Analytics). As a Data Analyst within the Revenue Operations team, you will serve as a vital technical link between product planning, strategic pricing, and sales execution for direct sales. This role is specialized within the RevOps ecosystem: you will focus on internal business unit reporting, program utilization, pricing efficacy, and deep-dive business analytics to drive informed decision-making. Success in this role requires a candidate who understands the B2B sales cycle and how Salesforce.com (SFDC) serves as the backbone of sales reporting. While you will manage essential workflows involving legacy enterprise systems, you will also be a primary architect for our future reporting landscape in Looker Studio, Microsoft Fabric and Power BI. You will play a key role in our department's digital transformation. We value technological agility and look for candidates who leverage modern tools-including Generative AI (GenAI)-to accelerate coding, automate manual processes, and navigate complex data environments. This position is full time and offers a hybrid work schedule requiring you to be in the office Monday, Tuesday and Wednesday and an option to work from home the remainder of the week (unless a specific business need arises requiring in office attendance on other days). Note that work schedules and office reporting requirements may change from time to time based on business needs. 1. Business Strategy & Profitability Analytics • Customer Segmentation: Analyze and define our customer base to identify "Who are our customers?" and categorize them by behavior, size, and loyalty, • Profitability Modeling: Perform deep-dive analysis into sales data to identify which customers and accounts yield the highest profit margins, • Vertical Performance: Track and report on Gross Profit (GP) by Vertical, identifying trends in specific industries to help leadership pivot strategy, • Predictive Insights: Use historical data to forecast which programs or product mixes will drive the most significant ROI for the direct sales force 1. Strategic Pricing & Business Intelligence • Reporting Architecture: Own and evolve the Power BI reporting suite that supports all business units, • Financial Modeling: Analyze internal program usage (credit/discount programs) and perform ROI modeling to identify business opportunities, • Executive Summaries: Consolidate data from disparate sources to provide "big picture" summaries and storytelling for Product Planning and Strategic Pricing leadership 1. Data Engineering & Workflow Automation • Technical Stack: Use SQL and Python to extract, consolidate, and analyze data from disparate sources, • Process Automation: Utilize Google Apps Script and other automation tools to streamline data collection and bridge gaps between Google Workspace and Microsoft-based legacy tools, • AI-Augmented Productivity: Leverage Generative AI tools to assist in writing/debugging code (SQL/Python/Apps Script) and documenting complex legacy workflows 1. Sales Ecosystem Integration • CRM & Sales Cycle Alignment: Apply an understanding of the B2B sales cycle and Salesforce.com (SFDC) to ensure that item codes, pricing logic, and reporting structures align with field sales requirements - Bachelor's degree in a relevant field or equivalent experience required, plus 3 to 5 years of related experience, • Technical Proficiency:, • Data Tools: Strong proficiency in SQL and Python for data manipulation, • Visualization: Experience building advanced reports in Power BI (specifically for GP and Vertical analysis), Looker experience a plus, • Modern Ecosystems: Familiarity with Microsoft Fabric and Google Apps Script and bridging Google/Microsoft environments, • Systems: Working knowledge of Salesforce.com (SFDC) and legacy ERP environments, • Business Acumen:, • Strong Financial Literacy, specifically in calculating Gross Profit, ROI, and margin analysis, • Solid understanding of B2B sales cycle and customer segmentation strategies, • Experience: 3 to 5 years in a highly technical Data or Revenue Operations role. Experience in a product/solutions sales environment is highly preferred, • GenAI Literacy: Familiarity with using Generative AI platforms to optimize technical workflows, • Detail Orientation: Extreme attention to detail is required We are providing the anticipated salary range for this role: $69,300 - $103,770 annually About our Company - Canon U.S.A., Inc., is a leading provider of consumer, business-to-business, and industrial digital imaging solutions to the United States and to Latin America and the Caribbean markets. With approximately $28.5 billion in global revenue, its parent company, Canon Inc., as of 2024 has ranked in the top-10 for U.S. patents granted for 41 consecutive years*. Canon U.S.A. is dedicated to its Kyosei philosophy of social and environmental responsibility. To learn more about Canon, visit us at www.usa.canon.com and connect with us on LinkedIn at https://www.linkedin.com/company/canonusa. Who We Are Where Talent Fosters Innovation. Do you want your next professional experience to be filled with purpose and opportunity, world-class team members, and impactful work? Driven by our mission of exceeding customer expectations with our technologies and enriching the lives of our local communities and staff, we are a phenomenal team working collaboratively toward common goals. Our employees have a strong work ethic, creativity, and a cooperative spirit. We believe in integrity, respect, empowerment, and making a difference in the communities we serve. There is a strong sense of pride in what we do individually and together as a team. Join us and discover what it means to work for a global digital imaging leader with an unparalleled reputation for quality and innovation. What We Offer You'll be joining a leader in digital imaging and innovation with an immense opportunity to make an impact and create your own rewarding career. We demonstrate commitment to our employees by offering a full range of rewards, including competitive compensation and benefits. And Even More Perks! -Employee referral bonus -Employee discounts -"Dress for Your Day" attire program (casual is welcome, based on your job function) -Volunteer opportunities to give back to our local community -Swag! A Canon welcome kit and official merch you can't get anywhere else *Based on weekly patent counts issued by United States Patent and Trademark Office. All referenced product names, and other marks, are trademarks of their respective owners. Canon U.S.A., Inc. offers a competitive compensation package including medical, dental, vision, 401(k) Savings Plan, discretionary profit sharing, discretionary success sharing, educational assistance, recognition programs, vacation, and much more. A more comprehensive list of what we have to offer is available at https://www.usa.canon.com/about-us/life-at-canon/benefits-and-compensation We comply with all applicable federal, state and local laws, regulations, orders and mandates, including those we may be required to follow as a federal government contractor/subcontractor. You must be legally authorized to work in the United States. The Company will not pursue or support visa sponsorship. All applicants must reside in the United States at the time of hire. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you are not reviewing this job posting on our Careers' site https://www.usa.canon.com/about-us/life-at-canon, we cannot guarantee the validity of this posting. For a list of our current postings, please visit us at https://www.usa.canon.com/about-us/life-at-canon. #CUSA Hybrid - This position is full time and offers a hybrid work schedule requiring you to be in the office three days a week and an option to work from home the remainder of the week (unless a specific business need arises requiring in office attendance on other days). Note that work schedules and office reporting requirements may change from time to time based on business needs. #PM19 #LI-AV1 #LI-HYBRID We can recommend jobs specifically for you! Click here to get started.

Deliver Modern Aviations exceptional service by proactively assisting passengers and flight crews. Prior customer service or aviation line service experience preferred. The employee is exposed to wet and/or humid conditions including extreme heat and cold; high precarious places; outside weather con

Job Description Job Title: KS-Production Associate-Hicksville-Industrial Location: Hicksville, NY 11802 Duration: - 3+ months Contract with possibility of extension Shift: Shift: Pay Rate: $18.00 per hour on W2 Shift: MON - FRI,4pm - 1:30am. Shift schedules could include weekends (Hours subject to business needs) Job Description We are seeking a Production Associate to join our operations team at Land O’Lakes (LOL) in Hicksville. The ideal candidate will have experience in food or industrial production environments, material handling, and GMP/HACCP practices and a proven ability to meet production targets while upholding quality and safety standards. Schedule and Pay: · Shift: Monday to Friday, Shift: MON - FRI,4pm - 1:30am. Shift schedules could include weekends · Pay: $18.00 per hour (W2). · Hours per day: 8. Pre-Submission Questions (to list at top of resume): • Can the candidate stand for up to 10 hours per day., • Is the candidate comfortable working in a cold environment and entering/exiting a 38°ree;F chiller during the shift. Jackets may be personal or provided., • Is the candidate comfortable wearing hearing protection in a noisy production environment., • Is the candidate comfortable wearing PPE: white lab jacket, protective glasses, helmet, and shoe covers., • Is the candidate comfortable team-lifting up to 50 pounds when boxes are moved., • Is the candidate comfortable transferring two- and four-pound carts of production in and out of 38°ree;F chillers and flipping trays as needed., • Can the candidate perform other duties as assigned, including transferring to the Kitchen area as needed., • Optional: Is the candidate bilingual in Spanish., • Does the candidate have prior food industry knowledge. Responsibilities: • Work self-reliantly and accurately under limited supervision to meet production demands., • Attend and monitor the transfer area from filler to chiller and orient product alignment at the table area., • Transfer carts of production in and out of chillers and stage orderly in the WIP area., • Flip trays in chillers as needed and rework product that is below specifications., • Inform supervisors or leads of any discrepancies in product information., • Keep the work area clean and organized by following the 5S program., • Promote a safe work environment and follow HACCP, GMPs, food safety, personal safety procedures, company policies, and regulations., • Perform other duties as assigned, including transferring to the Kitchen area as needed. Required Skills & Qualifications: • Must be 18 years or older., • Ability to read, write, comprehend, and follow verbal and written instructions; basic math skills., • Frequent movement including walking, standing, bending/stooping, twisting, pushing, pulling, raising arms, lifting, and climbing., • Able to lift up to 50 pounds with team support when required., • Ability to work in noisy environments and across temperature zones including cold and hot areas; dust may be present., • Ability to wear required PPE for the duration of the shift. Preferred Skills: • High school diploma or GED., • Bilingual in Spanish., • Prior food industry knowledge. Work Environment and Equipment: • Extreme cold/noise possible. Chiller at approximately 38°ree;F., • No operation of forklifts, tractors, vehicles, or heavy machines required., • No respirator, manlift, or confined space work required.Company DescriptionAbout BCforward: Founded in 1998 on the idea that industry leaders needed a professional service, and workforce management expert, to fuel the development and execution of core business and technology strategies, BCforward is a Black-owned firm providing unique solutions supporting value capture and digital product delivery needs for organizations around the world. Headquartered in Indianapolis, IN with an Offshore Development Center in Hyderabad, India, BCforward’s 6,000 consultants support more than 225 clients globally. BCforward champions the power of human potential to help companies transform, accelerate, and scale. Guided by our core values of People-Centric, Optimism, Excellence, Diversity, and Accountability, our professionals have helped our clients achieve their strategic goals for more than 25 years. Our strong culture and clear values have enabled BCforward to become a market leader and best in class places to work. BCforward is an equal opportunity employer.About BCforward:\r\n\r\nFounded in 1998 on the idea that industry leaders needed a professional service, and workforce management expert, to fuel the development and execution of core business and technology strategies, BCforward is a Black-owned firm providing unique solutions supporting value capture and digital product delivery needs for organizations around the world. Headquartered in Indianapolis, IN with an Offshore Development Center in Hyderabad, India, BCforward’s 6,000 consultants support more than 225 clients globally.\r\n\r\nBCforward champions the power of human potential to help companies transform, accelerate, and scale. Guided by our core values of People-Centric, Optimism, Excellence, Diversity, and Accountability, our professionals have helped our clients achieve their strategic goals for more than 25 years. Our strong culture and clear values have enabled BCforward to become a market leader and best in class places to work.\r\n\r\nBCforward is an equal opportunity employer.

Job Description Benefits • Paid training, • Medical, • Dental, • Vision, • Life/AD&D, • 401k with match, • Mileage and cell phone reimbursement For more than three decades California Closets has built a reputation on delivering truly custom products and unparalleled service to our clients. We’ve helped transform spaces, enhanced homes and allowed people to get more out of life. Our design consultants work closely with customers either in their homes or in one of our showrooms with company provided pre-scheduled appointments. As a California Closets Design Consultant, you will: • Offer a luxury experience for clientele through product expertise and elevated service., • Provide in-home design and consulting., • Work with interior designers, decorators, and architects., • Own all phases of the client experience from consultation to installation. Design Consultant Qualifications and Skills • Ability to listen to and collaborate with clients., • Personable and able to create relationships with ease., • Ability to manage multiple projects with extreme detail., • Excellent communication, organizational, and time management skills Design Consultant Requirements • Tech savvy – you will be required to learn our proprietary CAD software., • Must be able to take daily appointments and travel frequently in Nassau County, Queens, and non-MTA Brooklyn., • Full-time commitment Paid training of $55,000 and commissions up to and exceeding $120,000. *California Closets provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job Description *MUST BE FULLY VACCINATED* JOB SUMMARY: Is responsible for the planning, executing, directing and evaluating the nursing care given to the patient. The role is defined as the pre-procedure, intra-procedure and the post-procedure period. May have contact with the patient in each phase of the endoscopy experience. The responsibility includes the preparation assembly and organization of the environment, equipment and supplies necessary to perform the activities necessary for the preparation and the recovery of the ambulatory patient. JOB RELATIONSHIPS: Responsible to: Nurse Manager Interrelationships: Must have an effective working relationship with co-workers, members of the medical community, patients, family and the community. ESSENTIAL DUTIES AND RESPONSIBILITIES include but are not limited to the following: · Supervises nursing activities related to patient care and sets standards for accurate reporting and recording of patient’s symptoms, reactions and progress. · Provides input and standards in formulating patient care policy and procedures for the Center. Works with the medical staff to coordinate medical and nursing management of patient care. · Assists in maintaining an adequate inventory of supplies, drugs, and equipment. · Serves as a resource in areas of expertise to other staff members. · Participates in the preparation of the patient for their procedure. · Performs the pre-admission assessment. · Provides pre-procedure instructions. · Ascertains that all appropriate data is in the patient’s record prior to admission or immediately following admission and prior to procedure. · Communicates abnormal and/or extensive medical history to the physician as soon as discovered. · Maintains communication with reception areas and procedure rooms to assure efficient movement of patients. · Assists preparation of medications. · Admits the patient in the pre-procedure area and follows the admission protocols. · Checks signed consent prior to beginning case and performs a time out. · At the beginning of the day, checks to see that necessary supplies required by the day’s procedure schedule are available in the procedure rooms. · Prepares patient for procedure by verifying patient identity and scheduled procedure, and assists patient into procedure room. · Helps to relieve patient’s apprehension before and during administration of conscious sedation. · Makes available additional instruments and supplies as requested during the procedure. · Documents and labels specimens clearly and correctly. · Assists in transferring patient to PACU. · Is responsible to assure that supplies for each case are ready for use. · Is responsible for maintaining a safe environment during the procedure. · Assists in cleaning of room after each case. · Assists with post-procedure call to patient and documents call and patient’s responses on patient’s record. · Tasks inventory and restock supplies as needed. · Receives patient from the procedure room, assesses patient’s condition on admission and discharge, and documents on PACU record. · Closely observes and monitors the post-procedure patient by taking vital signs, EKG (if required) and documenting patient’s progress while in PACU. · Administers medications, IV’s and treatments; maintain records regarding dispensing of same; observes patient’s reaction and acts appropriately in the event of adverse reactions. · Performs/assists physicians in other procedures as requested. · Assures patient that he/she is not, and will not be, left alone in the recovery areas. · Provides a summary of post-procedure instructions to patient prior to discharge from the unit. · Makes sure patient has information for follow-up appointment before being discharged. · In an emergency situation, is able to give immediate respiratory assistance or support, including use of AMBU bag, airway tubes; administers CPR; assists with endotracheal tubes and defibrillation, and performs venipuncture. · Knows and maintains CODE Blue/crash cart. · Recognizes and utilizes safety precautions and procedures. · Remains familiar with equipment and supplies, including, location, and upkeep. · Assists in restocking units as needed. · Maintains a comfortable, orderly, clean, safe environment in the recovery areas. · Adhere to all OSHA regulations and participate in annual reviews, attend inservices for employee safety and injury prevention within the workplace INFECTION CONTROL CATEGORY: This job is designated as a Category I job using the OSHA definitions. This means there are tasks that involve exposure to blood or other potentially infectious material. Use of appropriate protective measures are required for any employee engaged in Category I tasks. QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. EDUCATION and/or EXPERIENCE: RN with current NY state license Current CPR certification Current ACLS certification (If applicable) Previous Endoscopy experience, one year preferred LANGUAGE SKILLS: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. MATHEMATICAL SKILLS: Ability to add, subtracts, multiply, and divides in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. REASONING ABILITY: Ability to define problems, collects data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; and talk and hear. The employee frequently is required to walk. The employee is occasionally required to sit. The employee must frequently lift and/or move up to 50 pounds and occasionally lift and/or move more than 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works near moving mechanical parts. The employee is frequently exposed to fumes or airborne particles, toxic or caustic chemicals, and extreme heat, and vibration. The employee is occasionally exposed to wet and/or humid conditions and risk of radiation. The noise level in the work environment is usually quiet. Job Type: Full-time Salary: $40.00 - $45.00 per hour Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Paid time off, • Vision insurance Medical specialties: • Gastroenterology, • Perioperative Care Physical setting: • Ambulatory surgery center, • Outpatient Standard shift: • Day shift Supplemental schedule: • Overtime Weekly schedule: • Monday to Friday Ability to commute/relocate: • Huntington, NY 11743: Reliably commute or planning to relocate before starting work (Required) Experience: • Nursing: 1 year (Preferred), • Endoscopy: 1 year (Preferred), • Ambulatory surgery center: 1 year (Preferred) License/Certification: • ACLS Certification (Preferred), • RN (Required) Work Location: In person

Job Description Description/Job Summary: The Building People, LLC, has a position open for a full-time Area Facilities Operations Specialist in Kings Point, NY. The Area Facilities Operations Specialist shall assist the Project Manager & Customer with the execution and implementation of a multi-faceted, comprehensive, operations & maintenance program to ensure the buildings and grounds are properly monitored and maintained to meet the functional, appearance, safety, security, and environmental standards. • Support Project Manager with submission of accurate & timely contractual deliverables., • Assist Project Manager & customer in implementing corrective actions, repair, and maintenance., • Assist the Project Manager & customer in tracking project status, performing inspections, providing documentation, and verifying completion of projects or work orders., • Identify, document, and report all physical building deficiencies, followed by a recommendation for repair., • Create/update project schedules., • Assist with weekly facility inspections and checklists., • May perform assessments to identify, document and recommend additional facility maintenance requirements., • Monitor physical and functional condition of building systems., • Initiation of Work Order requests and criteria/objectives for maintenance and repair, input into Maximo/Work Order System., • Planning, coordination and quality assurance requirements and specifications for service contract support of facility repairs., • Coordinate and participate in occupational health and safety inspections., • Maintain environmental compliance., • Documentation, checklists, schedules, and reports., • Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem-solving situations; Uses reason even when dealing with emotional topics., • Other duties as assigned. Required Experience/Skills: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. • Detailed knowledge of building electrical, mechanical, plumbing, fire protection, interiors, and roofing systems., • Experience conducting building inspections/facility condition assessments., • Ability to work independently, efficiently, and prioritize effectively in order meet project deliverables and deadlines., • Familiarity with standard CMMS systems, estimating tools, and Microsoft Suite., • Must always be able to communicate effectively and in a professional manner. Physical Demands - The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to sit and talk or hear. The employee is frequently required to walk; use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to stand; climb or balance and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision. May be asked to drive for several hours each day during the course of site inspections. Work Environment - The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The employee will normally work in a temperature-controlled office environment, with frequent exposure to electronic office equipment. During visits to areas of operations, may be exposed to extreme cold or hot weather conditions. Is occasionally exposed to fumes or airborne particles, toxic or caustic chemicals, and loud noise. Required Education: • Bachelor's degree (B. A.) from an accredited college or university and a minimum three (3) years of experience;, • Five (5) plus years of related experience and/or training or equivalent combination of education and experience., • Ability to successfully pass government background investigation/clearance., • Valid Driver’s License.

Job DescriptionJob Summary Reporting to the Area Manager/Regional Program Director, the CDL Program Director is responsible for providing leadership for the CDL Program. The CDL Program Director provides subject matter expertise and actively participates in curriculum development, revision, and implementation process. As the subject matter expert in a particular program, the CDL Program Director provides product knowledge training to the Account management group, utilizing materials generated via the centralized curriculum development process. This position is responsive to the Account management staff when asked to engage with potential students and actively participates in new student orientation. The CDL Program Director is responsible for hiring, assigning, orienting, developing, evaluating, and recognizing Driver Trainers within the program(s) of study. The CDL Program Director will convene meetings with faculty on a regular basis. The CDL Program Director is also responsible for monitoring and supporting the student population within his/her program of study. The CDL Program Director plays an active role in the student advising process, including advising students during the provisional period, meeting with students who initiate a complaint, advising students who have career-oriented questions, and consulting with students whose engagement and/or academic progress is in question. The CDL Program Director analyzes student population data, working with faculty and staff to identify students who may be at risk, and contacting students to identify barriers to success and to provide support and information concerning student services. Finally, the CDL Program Director is responsible for continuous improvement of the program. Actively engaged in the development and maintenance of the campus effectiveness plan, the CDL Program Director collects data for purposes of analyzing program performance. Key Responsibilities I. Provides Services to Students Supplements Driver Trainer advising for students receiving failing assessments. Provides academic advising as needed to students. Provides referrals to outside resources when counseling needs go beyond the scope of the school. Provides or arranges for student tutoring when needed. Leads student retention initiatives for students in the program who experience barriers to success. Maintains regular contact with all students within the program area and responds to their questions and/or concerns in a timely manner. Posts office hours for students. Refers students to appropriate staff for non-academic problem resolution. Contacts students who miss days from class or whose absence during the week results in more than four absences during the course. Maintains records of interactions and correspondence with students (i.e. phone calls, emails, mail). Monitors contact, and results of contact, from Driver Trainers to students in assigned program area(s). Makes calls weekly to students who (a) were not called or could not be reached; (b) did not return as promised; or (c) did not offer plans to return by a specific date. Offers appropriate academic advice and demonstrates genuine interest in students. Identifies students needing tutoring. II. Oversees Status of Quality of Curriculum, Instructional Materials, Equipment, and Facilities Serves as a subject matter expert regarding academic curriculum for program area. Actively participates in the curriculum development/revision process led by the Home Office Executive team. Provides leadership in the implementation of new and revised curriculum. Provides input into creating the master schedule regarding course sequencing, offerings, room assignments, and Driver Trainer teaching assignments. III. Oversees Faculty Performance and Development Assists the Area Manager/Regional Program Director in the recruitment, interviewing, and hiring of faculty for program of study. Orients, monitors, supervises, mentors, and assists new Driver Trainers. Ensures that all program area Driver Trainers adhere to required administrative and classroom delivery duties and requirements as outlined in the job description for CDL Driver Driver Trainer. Ensures completeness of faculty files and documentation of official transcripts, professional development, observations, and performance reviews. Provides leadership and supports all Driver Trainers and supervises their instructional and program needs. Observes classes within the program area and coaches Driver Trainers to continually improve instructional presentation and classroom management skills. Conducts performance appraisals of department faculty members, including areas of strength and recommendations for improvement and future skillset development. Conducts regular weekly day and evening faculty meetings. Meeting topics may include improvement of course offerings, methods of instructional delivery, selection of texts, and such other purposes which serve to improve the quality of the instructional program. Documents all meetings. Provides departmental product knowledge training to Account management and Career Services personnel as requested. Provides information to all departments as trends and changes in program specialty areas occur. Assists account management personnel with student recruitment as requested. Promotes faculty participation and provides leadership in the professional development activities of program faculty members and the documentation of those activities. Participates actively in a minimum of one professional organization within the community. Attends faculty meetings and in-service programs. Maintains a record of professional development activities. Maintains current personal knowledge of federal and state institutional regulations, and accreditation standards related to program area. Participates in preparation of government and accreditation reports and ensures their timely submission and accuracy. Assists the Area Manager/Regional Program Director in evaluating data collected from student questionnaires and conducts faculty conferences when necessary to discuss the results and provides recommendations for improvement. Maintains regular office hours each week to ensure consistency between day and evening policies, procedures and instruction. Collaborates with peers and associates to ensure coordination of interdepartmental activities. Intervenes in and works to resolve any personnel issues that arise among program area Driver Trainers. Assists the Area Manager/Regional Program Director in planning program budgetary needs if and when applicable. Performs all duties of a full-time Driver Trainer. IV. Leads and Develops Others Provides clearly defined roles and objectives for driver trainers, monitors performance, provides feedback, and meets regularly to discuss priorities. Resolves individual and group performance opportunities in a timely manner to motivate and foster teamwork. Identifies opportunities to involve others in new and challenging work assignments that advance the skills and capabilities of individuals and the organization. Experience and Education Required High school diploma or GED. Industry certification in the field of instruction if required by industry, or demonstrated knowledge equivalent to the certification. 3 years of experience in academic instruction in a post-secondary environment. 5 years of industry experience in the field of instruction. 2 years of experience in a management or supervisory role. Ability to qualify as a CDL Driver /Driver Trainer. Knowledge regarding faculty development, including requirements, delivery methods, and reporting. Motivation, dedication, professionalism, integrity, and enthusiasm for teaching. Ability to show sensitivity to the needs and requirements of adult learners. Ability and desire to embrace the school’s mission. Ability to inspire students to the highest level of achievement in preparation for meeting employer expectations. Knowledge of industry standards and requirements within the field of instruction. Knowledge of and ability to facilitate learning on course content within the field of instruction. Excellent organizational skills. Knowledge of Microsoft Office programs and database programs (CampusVue preferred). Ability to develop and use collaborative relationships for the purpose of accomplishing work objectives; developing relationships with other individuals by listening, sharing ideas, and appreciating others' efforts. Superior verbal and written communication skills. Interpersonal relationship skills necessary for positive interactions with students, alumni, faculty, and employers. Excellent creative and problem solving skills in dealing with students, alumni, employers, faculty, and staff. Ability to meet and/or exceed defined goals. Excellent presentation skills and ability to present ideas effectively to individuals or groups in a formal setting. Management skills in planning, organizing, controlling and evaluating programs and policies in a dynamic and changing environment. Knowledge of the federal FMCSA and state Department of Motor Vehicle standards. Experience and Education Preferred Associate’s Degree or higher, documented specialized competency within the field of instruction, or equivalent work experience in the field of instruction. 5 years of experience in academic instruction in a post-secondary environment. 10 years of experience in the field of instruction. Working knowledge of federal/state government education regulations. 3 years of experience in a management or supervisory role. Previous experience as an academic program director. Experience in student guidance, or related fields. Working knowledge of federal/state government regulations. Physical Demands Mobility & Balance: Ability to frequently climb in/out of the cab, bend, squat, kneel, twist and reach to perform pre/post-trip inspections and navigate tight spaces. Strength: Ability to crank trailer landing gear (often 100+ lbs), handle training and safety equipment, and potentially assist with loading/unloading (if applicable). Endurance: Ability to sustain physical activity and be alert during extending driving and instructional periods, including exposure to varying weather conditions such as heat, cold, wind, rain, ice or snow. Sensory Acuity and Overall Health: Must possess and maintain a valid DOT Medical Examiner’s Certificate and meet DOT physical qualifications required to hold a CDL, with or without reasonable accommodations, as required by Federal regulations. Specific Tasks & Considerations: Demonstrating Skills: Physically showing students how to couple/uncouple trailers, perform inspections, and maneuver the large vehicle. Environmental Exposure: Working outdoors in various conditions including extreme heat, cold, rain, or snow while training. Work Environment Work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is usually not exposed to weather conditions. The noise level in the work environment is usually moderate. Note This is not necessarily an exhaustive list of all responsibilities, skills, duties, or requirements associated with the job. While this is intended to be an accurate reflection of the current job, management reserves the right to revise the job or require that other or different tasks be performed when circumstances change. I have read and understand the above job description. I further understand that this is not an all-inclusive list and does not constitute a contract. My employment remains at will as with all employees of Ancora Education.

Job Description At Interstate Home Loan Center, we’re building a platform where great people thrive. We’re looking for a high-energy, detail-oriented Loan Officer Assistant who wants to be part of a fast-paced mortgage team that values growth, professionalism, customer experience, and teamwork. This is not a “sit back and collect a paycheck” type of role. This is for someone who wants to grow, learn the mortgage business, and become a major part of a winning operation. What You’ll Love: • Growth-focused environment, • Direct mentorship and training, • Opportunity to learn the mortgage business from the inside, • Strong team culture, • Competitive compensation, • Working with a company that values Competitive Greatness, Extreme Caring, and Long Term Perspective We’re not just looking for someone to “help with files.” We’re looking for someone who wants to become an impact player. Compensation: $50,000 - $65,000 yearly Responsibilities: What You’ll Do: • Help manage active loan files from application to closing, • Communicate with borrowers, real estate agents, attorneys, and operations staff, • Collect and organize documentation, • Follow up on conditions and outstanding items, • Assist Loan Officers with pipeline management and daily task organization, • Help deliver a smooth, professional client experience, • Support database follow-up and relationship management efforts, • Keep files moving quickly and efficiently Qualifications: What We’re Looking For: • Mortgage experience, • Strong communication skills, • Organized and detail-oriented, • Able to multitask in a fast-paced environment, • Positive attitude and team-first mentality, • Comfortable on the phone and with client communication, • Tech-savvy and quick to learn systems About Company For more than 30 years, Interstate Home Loan Center has been helping people turn their dreams of owning a home into a reality. At Interstate, we’re not just building a mortgage company — we’re redefining what success looks like in the modern financial space. We’re a high-performance, growth-focused team obsessed with delivering value, creating brand trust, and building the best environment in the industry for our people and partners. If you're energized by bold ideas, fast execution, and making a real impact, this is your seat at the table.

Job DescriptionJob description Seeking a motivated, intelligent, hard-working individual to grow as part of the Quality Assurance and Regulatory Affairs team. PRIMARY DUTIES AND RESPONSIBILITIES • Develop/design effective test methods., • Facilitate software design and development for medical devices., • Performance testing and reporting on software, hardware, and the compatibility for all accessories., • Maintain/calibrate the accuracy of all testing equipment., • Perform risk assessments for medical devices and accessories., • Maintain the effectiveness of quality control system and non-conforming materials control system., • Discuss and solve quality problems with vendors., • Development and prototyping of new products with existing or new vendors., • Investigate problems and make improvement on current products, • New product development. REQUIREMENTS Education : Bachelor degree in mechanical, electrical, material, biomedical engineering, or relative field. Training : SOPs, Risk Assessment/ On-the-job Training Abilities : • Familiar with FDA 21CFR 820 and ISO 13485 regulations, • Knowledge of European regulations is a plus, • Extreme attention to details, • Knowledge of common medical materials (silicone, polyurethane, etc.), • Knowledge of electrical circuits, • Knowledge of basic programming, • Able to think outside the box with excellent problem solving abilities, • Excellent interpersonal, commutation, and writing skills, • Highly organized, • Excellent computational skills (MS Office, databases, testing), • Knowledge of C/C++ is a plus. Experience : 2-5 years of experience as a quality representative in a FDA or ISO 13485 compliant company Medical Dental 401K Vacation Job Type: Full-time Pay: $65,000 - $70,000 per year Powered by JazzHR W0tsseK6j1

Job Description MAINTENANCE OPERATOR Full Time | New York, NY Reports To: Property Manager & Assistant Property Manager POSITION SUMMARY A commercial real estate firm is seeking a skilled and motivated Maintenance Operator to support our Long Island retail and commercial portfolio. The ideal candidate is a self-starting professional with hands-on experience across multiple building trades, strong communication skills, and the ability to manage priorities independently while reporting to property management. WORK ASSIGNMENT Long Island Portfolio — Commercial Retail & Office Properties RESPONSIBILITIES Responsibilities include, but are not limited to, the following: • Complete tenant and base building work orders, including plumbing repairs, electrical maintenance, painting, door and hardware repairs, carpentry, and snow removal. All work orders are recorded and tracked using BDG’s Facility Manager App., • Perform electrical maintenance, troubleshooting, and repairs on commercial distribution systems, HVAC and controls, lighting systems, and emergency power systems., • Execute all work to industry-standard quality, including proper preparation, site protection, and clean-up upon completion, in a time-efficient manner., • Perform preventative maintenance tasks including bulb and ballast replacement, filter changes, equipment cleaning and lubrication, belt changes, and alignment—all tracked through BDG’s Facility Manager App., • Operate common and specialty tools safely and proficiently., • Respond to and assist with emergency calls on a 24/7 basis, including weekends and holidays as required., • Overtime hours will be required as needed based on operational demands, emergencies, and after-hours inspections such as monthly site lighting reviews., • Direct and monitor contract workers as needed to support facility operations and maintenance., • Apply knowledge of safety procedures and building trade hazards, including safe lifting of objects weighing up to and over 60 pounds., • Perform physical tasks including prolonged standing, walking, kneeling, climbing ladders, operating man lifts, and working in confined spaces and extreme temperatures., • Maintain professional, collaborative relationships with staff, tenants, vendors, and contractors; work effectively both independently and as part of a team., • Proactively inspect properties, identify problems or abnormalities, perform corrective action, and/or report findings to management promptly., • Report directly to the Property Manager and Assistant Property Manager; provide detailed daily reports., • Prepare and present comprehensive property reports to the Property Manager, documenting the physical condition of properties, maintenance activities, outstanding issues, and recommended corrective actions., • Conduct monthly site lighting inspections at all Long Island properties (typically performed at night; billed as overtime)., • Utilize the Facility Manager App to maintain records of all inspections, preventive maintenance, and repairs in compliance with state, federal, and FDNY requirements., • Keep building storage rooms, maintenance shops, mechanical rooms, and back-of-house areas neat and orderly., • Monitor and adjust temperatures in vacant spaces and mechanical rooms across all properties, including seasonal activation of heaters and heat trace systems., • Maintain and account for all company-issued tools and equipment., • Keep the assigned company utility van current on all required maintenance and services., • Travel regularly between multiple commercial properties across the Long Island portfolio using a company-issued utility van; a valid driver’s license and comfort operating a van are required., • Notify management of supply or special tool needs; place supply orders when authorized and pick up orders as necessary., • Assist with moving equipment or furniture between properties or storage units as needed., • Support on-site and off-site emergency response and unforeseen operational issues., • Record and report utility readings (gas, water, and electric meters) as directed., • Use the ADP App to clock in/out daily and complete weekly timesheets for payroll processing., • Communicate effectively in written and spoken English., • Poper assigned work attire must be always worn and maintain a professional appearance., • Familiarize with and adhere to all company policies as outlined in the Employee Handbook., • Perform additional duties as assigned by management and/or ownership. REQUIREMENTS • High School Diploma or GED equivalent, • 3–5 years of experience in a related field or specific building trade, • Valid driver’s license; must be comfortable operating a utility van, • Ability to respond to emergency calls 24/7, including nights, weekends, and holidays, • Strong working knowledge of commercial building systems and maintenance trades, • Proficiency with common and specialty maintenance tools, • Ability to perform physically demanding tasks in varied environmental conditions PREFERRED QUALIFICATIONS • OSHA Certification, • Experience working independently across multiple sites without direct supervision, • Familiarity with building automation systems (BMS), • Basic plumbing and electrical troubleshooting experience in a commercial setting COMPANY BENEFITS Employee contributions and waiting periods may apply: • 401(k), • Medical Insurance, • Dental Insurance, • Life and Accidental Death Insurance, • Short and Long-Term Disability Insurance, • Flexible Spending Account (FSA)

Job Description *THIS IS A 3rd SHIFT POSITION* *MUST HAVE EXPERIENCE MAINTAINING AND REPAIRING CONVEYORS! Position Summary Maintain Machinery and Mechanical equipment by completing preventive maintenance requirements; dismantling devices; examining form and texture of parts; adjusting controls; fabricating repair parts; leading team members. Position Responsibilities: • Complete preventive maintenance prerequisites on mechanical equipment like motors, conveyors, production machines, pneumatic tools (i.e., power tools such as: air compressor, buffers, nailing and stapling guns, grinders, drills, jack hammers, chipping hammers, riveting guns, sanders and wrenches) as well as engines, thereby ensuring smooth operation of such machinery and mechanical gadgets., • Repair conveyor system and maintain forklifts, electric, and propane equipment., • Troubleshoot and repair pneumatic, electrical, hydraulic, compressor, conveyor and inspection systems as needed., • Ensure that warehouse machinery function correctly and efficiently, so that the production shift meet the company’s shipping demands on a nightly basis, and that equipment perform optimally., • Observe, dismantle, adjust, and repair mechanical devices and control instruments as needed., • Assemble, install, and fabricate equipment as well as perform preventative and predictive maintenance as well as update all required documentation to include nightly repair logs., • Design, develop, manage and maintain control systems (i.e. Distributed Control System, Programmable Logic Controller). Perform all work and conduct oneself in a manner that promotes safety of the individual and all other at employees., • Troubleshoot, make necessary repairs or upgrades, and perform preventative maintenance and service to process control equipment, control systems, equipment calibration, and instrumentation equipment to provide for the reliable operation of this equipment. Investigate problems, analyze for root causes and derive resolutions., • Attend shop meetings and utilize/maintain personal tools., • Prepares and sets up machinery for scheduled production runs., • Maintains efficient operation of material handling equipment by clearing jams and removing foreign materials., • Refer to specifications, technical manuals, blueprints, schematics and ladder diagrams as needed in order to resolve equipment issues. Knowledge: • Familiar with automatic controls and 480 volt 3 phase electrical systems., • Familiar with Occupational Safety and Health Administration (OSHA) safety and health regulations., • Knowledge with proper use of pneumatic (i.e., power tools such as: air compressor, buffers, nailing and stapling guns, grinders, drills, jack hammers, chipping hammers, riveting guns, sanders and wrenches), electrical, and hydraulic conveyor systems., • Knowledge in basic cutting/welding, electrical/wiring and carpentry experience helpful., • Experience operating a Forklift in addition to heavy equipment., • Capable of managing stressful and high pressure situations as there is an extreme sense of urgency to repair items in an emergency. Skills: • Excellent mechanical skills in order to read and interpret technical manuals and sophisticated diagnostic equipment to perform required maintenance and service., • Able to reassemble large, complex equipment after completing a repair., • Manual dexterity required for operating machinery and equipment when handling parts, must have a steady hand and good hand-eye coordination., • Excellent problem solving/trouble shooting skills in order to observe, diagnose, and fix machinery malfunctions., • Technical experience and exposure to high-speed equipment.

Job Description Job Summary This position will be responsible for all driver training functions for the CDL training program at their assigned location. The CDL Driver Trainer will have proven longevity in the field, excellent communication skills, and possess demonstrated physical, intellectual, and leadership ability to perform duties over the road, maneuvering range, and in classroom instruction. The CDL Driver Trainer works under the guidance and supervision of the Program Director, Lead Driver Trainer, or their designee. Key Responsibilities Promotes and Maintains a Positive Learning Environment Maintains a thorough knowledge and understanding of all policies, and adheres to and upholds their implementation and enforcement. Convenes all assigned classes per their start and end times. Maintains a safe environment for all students and staff. Safeguards materials, records, and equipment. Abides by all Federal, state, and accreditation/compliance rules and regulations. Serves as a professional role model to students. Inspires student confidence in program, faculty, and self. Maintains professional dress and demeanor and communication Maintains appropriate confidentiality when working with students, records, and administrative staff. Maintains an attitude of enthusiasm and willingness to cooperate and collaborate. Interacts with students and fellow employees in a courteous, professional, and positive manner. Treats students with fairness, impartiality, and objectivity. Provides advance notification regarding lateness, absence, and vacation schedules during time of substitute assignment. Fulfills Administrative Responsibilities Maintains accurate, up-to-date records of student progress, performance, and attendance, using the tools and technology provided by the institution, as required by school policy and procedure. Maintains appropriate confidentiality when working with students, records, and administrative staff. Maintains flexibility in fulfilling the instructional needs of the division/client. Delivers Instructional Material Train students in all areas of trucking/driving. Administer written tests on classroom material and evaluate grades. Conduct pre-trip inspections of commercial motor vehicles Instruct air-brake tests. Instruct straight-line backing. Instruct offset backing, right and left. Instruct 45-degree alley-docking. Instruct parallel parking, conventional side, and driver side. Utilize effective delivery skills (e.g., eye contact, voice intonation, and various questioning techniques). Draw on personal experiences to relate the material presented. Utilizes required skills assessments to evaluate student progress in the skills required to successfully pass and obtain their Commercial Driver’s License. Ability to stand and walk for 8-10 hours outside, in all elements, climb in and out of trucks several times a day, and lift and move up to 50 lbs. Experience and Education Required Valid Commercial Driver’s License (CDL), the Class level must meet the required level of the position High School Diploma or GED. 3 years of verifiable on-the-road experience within the last 5 years. MVR and background check, which includes a drug screening Ability to pass our road test, as applicable. Required to pass a DOT physical and DOT drug screen. Ability to maintain a valid Medical Examiner Certificate and pass DOT drug tests upon hire and on an ongoing basis, when applicable. Knowledge of procedures for and ability to execute a pre-trip inspection, air-brake tests, and CDL driving essentials (i.e. straight-line backing, offset backing, 45-degree alley-docking, parallel parking). Ability to instruct shifting patterns (i.e. driving highway, city, night vs day, in different weather conditions). Knowledge of and demonstrated ability to maintain vehicle equipment. Motivation, dedication, professionalism, integrity, and enthusiasm for teaching. Ability to show sensitivity to the needs and requirements of adult learners. Ability to attend new faculty orientation before the first term of employment. • Ability and desire to embrace the school’s mission., • Ability to inspire students to the highest level of achievement in preparation for meeting employer expectations., • Commitment to stay current with industry standards and requirements within the field of instruction., • Ability to facilitate learning on-course content in the field of instruction., • Excellent presentation skills and ability to present ideas effectively to individuals or groups in a formal setting., • Superior verbal and written communication skills., • Interpersonal relationship skills are necessary for positive interactions with students, alumni, faculty, and employers., • Proficiency in technology to include but not limited to Microsoft office suite, Google suite, and cloud based applications. Physical Demands Mobility & Balance: Ability to frequently climb in/out of the cab, bend, squat, kneel, twist and reach to perform pre/post-trip inspections and navigate tight spaces. Strength: Ability to crank trailer landing gear (often 100+ lbs), handle training and safety equipment, and potentially assist with loading/unloading (if applicable). Endurance: Ability to sustain physical activity and be alert during extending driving and instructional periods, including exposure to varying weather conditions such as heat, cold, wind, rain, ice or snow. Sensory Acuity and Overall Health: Must possess and maintain a valid DOT Medical Examiner’s Certificate and meet DOT physical qualifications required to hold a CDL, with or without reasonable accommodations, as required by Federal regulations. Specific Tasks & Considerations: Demonstrating Skills: Physically showing students how to couple/uncouple trailers, perform inspections, and maneuver the large vehicle. Environmental Exposure: Working outdoors in various conditions including extreme heat, cold, rain, or snow while training. Work Environment Work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is usually not exposed to weather conditions. The noise level in the work environment is usually moderate. Note This is not necessarily an exhaustive list of all responsibilities, skills, duties, or requirements associated with the job. While this is intended to be an accurate reflection of the current job, management reserves the right to revise the job or require that other or different tasks be performed when circumstances change. I have read and understand the above job description. I further understand that this is not an all-inclusive list and does not constitute a contract. My employment remains at will as with all employees of Ancora Education.

At UFC GYM we inspire others to reach their potential in and out of the gym. Clean windows, glass doors and mirrors in the gym. Possess extreme attention to detail regarding the cleanliness and safety inside the gym.

REQUIRED QUALIFICATIONS:/pulliMust be able to work quickly, thoroughly and independently/liliMust know and understand the proper use of chemicals and cleaning materials/liliPossess extreme attention to detail regarding the cleanliness and safety inside the gym/liliDisplays and promotes a positive an

The UPS Store - 734 Franklin Avenue - Responsibilities: Expertly pack fragile and high-value items using advanced protective techniques; Build custom packaging solutions (foam, double-boxing, specialty materials); Handle artwork, antiques, and delicate items with extreme care; Assist with local pick

Job Description We're looking for Customer Advocates with at least 2 years of customer-facing experience to build an exciting career at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500! Whether it's helping customers with our one of a kind Vending Machine experience or getting involved in the local community, our Customer Advocates are leading the charge in reintroducing happiness into the car-buying process. Shift Requirement:. The hours for this position are from 1pm - 9pm. We ask that team members be available to work 7 days a week. Days off will rotate between weekdays and weekend days. Unlock Your Earning Potential! We offer a competitive starting hourly rate of $22/hr with significant growth opportunities based on performance. You can boost your earnings within a short timeframe: • Pay Range: $22-$24 hourly, • Starting Pay: $22.00/hr, • At 3 Months: $22.50/hr, • At 6 Months: $23.00/hr In your first year, you can progress from $22/hr to 24/hr through our performance-based Careers Not Jobs program, which provides four merit opportunities annually. As part of this program, eligible team members can enjoy a $0.50 increase in their pay every 90 days. And that's not all! Market Operations may offer other performance-based incentive programs specific to your location, potentially unlocking even greater earnings. Benefits + Perks: We continually invest in our team members' success because when our team members grow, we grow. Here is how we invest in you: • Compensation: Competitive, Performance-Based Compensation PLUS 401(k) with Carvana match, opportunity for overtime during busy seasons, • Fast Track Advancement Opportunities: Stellar performers achieve higher pay rates sooner based on performance. Hard work and stellar performance won't go unnoticed., • Health & Wellness: Carvanafit Wellness Program. Free mental health help with Supportlinc., • Time Off & Work-Life Balance: Generous paid time off (7.5 days), • Professional Development: Extensive internal growth and professional development opportunities, • And more! About the Role: We're looking for enthusiastic, energetic, and self-motivated team players with at least 2 years of customer-facing experience to: • Create an amazing and memorable pick up experience for our customers; you'll be the face of Carvana when customers come onsite to our car Vending Machine, • Complete customer paperwork and include thorough notes in our customer tracking system, • Swiftly address any customer questions or minor technical issues related to the vending machine process, ensuring a positive and memorable experience., • Consistently drive safe and maintain a clean driving record in accordance with Carvana's CMV Driver Qualification policy., • Candidates must have (or be able to obtain) a Notary in your local jurisdiction within the first 90 days of employment (process sponsored by Carvana). This process may involve satisfying state-specific requirements. For further details, candidates can review their local state notary requirements here: State Notary Requirements., • Candidates must be able to satisfy state-specific requirements related to access DMV/title and registration systems., • California employees must obtain a Vehicle Verifier license within the first 90 days of employment (Process sponsored by Carvana). General qualifications and requirements • Ability to perform physically demanding tasks like detailing vehicles and loading/unloading vehicles onto our Vending Machine. You will work in indoor and outdoor conditions with occasional exposure to inclement/extreme weather, • Ability to walk/stand and sustain physical activity for extended periods of time (8+ hours), • Must be able to read, write, speak and understand English, • Requires high and low levels of movement with the ability to reach with arms, twist, kneel, crouch, climb, balance, and squat, • Requires the grasping, carrying, lifting, pushing, and pulling of items of 50lbs., • Frequent driving requires excellent visual acuity and manual dexterity. Reasonable accommodations may be granted to enable individuals with disabilities to perform the essential functionsLegal stuff This job description is not designed to contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. This role is not eligible for visa sponsorship. Must be at least 21 years of age and possess a valid driver's license. Must be able to read, write, speak, and understand English.

Job Description We are a small CPA firm in Melville, NY looking for a dedicated Administrative Assistant to manage our front office and support our tax professionals. You will be the primary point of contact for our clients, ensuring their documents are handled with extreme accuracy and confidentiality. This role is essential to our firm's workflow, especially during our peak season from January to April and September to October. • Experience: 1–3 years in a professional office environment; experience in a tax or accounting firm is a major plus., • Software Skills: Proficiency in Microsoft Office 365 (especially Excel/Outlook) and familiarity with tax software like CCH Axcess is highly desirable., • Reliability: Must be able to work full-time hours, including occasional overtime during the tax season peak.

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo