Extreme jobs in Rochester, New YorkCreate job alerts

Job Description Atlantic Plywood is looking for a full-time Truck Driver to join our team! We are looking for skilled Class A CDL Drivers to help meet the needs of customers by delivering and picking up products in a timely, safe, and courteous manner. We seek highly motivated and experienced drivers with a background in delivering construction and or industrial products and providing customer satisfaction. Responsibilities include, but are not limited to: • Maintain driver logs and complete pre-trip inspections, • Follow all corporate operational procedures and QC Standards, • Adhere to all safety requirements, including Federal Motor Carrier Safety Regulations, • Maintain the service and appearance of all company vehicles, • Follow delivery/pickup instructions from Warehouse Manager and/or Sales Manager, • Authorization to work in the US, • High school diploma / GED, • Valid Commercial Class A Driver’s License and clean driving record, • Current Medical Card, • Good understanding of safety procedures and use of personal protection equipment (PPE), • Good organizational and time management skills, • Must be able to work unsupervised as well as in a team, • Must be able to start early, work late occasionally as needed, • Knowledge of GVWR’s, state/federal regulations regarding height/weight maximums, & winch operations, • OSHA familiarity/training, • Acceptable DOT Drug Test History, • Previous CDL Driving experience, • Previous warehouse experience, • Flatbed and/or tractor-trailer experience, • Frequent holding and grasping with the hands when loading and unloading equipment and while securing your load, • Frequent use of foot/feet, • Frequent lifting of 50 lbs.; occasional lifting up to 90 lbs., • Frequent pushing and pulling of truck side-curtain walls, • Frequent use of winch & ratchet strap tie-downs for load securement, • Morning Shift, • Local Routes w/ Occasional Overnight Deliveries, • Weekends off, • 10+ Paid Holidays, • Accruable PTO, • 401(k) Program, • Company Paid Life Insurance, • Short- and Long-Term Disability Insurance, • Health, Dental, Vision, and Flexible Spending Insurance Plans, • A positive work environment with all team players, • Bonus incentives for employee referrals Since our inception in 1974, Atlantic Plywood Corporation has prided itself on delivering the highest quality and best value to our customers. This philosophy has helped us grow into a regional industry leader, distributing a wide range of quality hardwood plywood and panel products and solutions throughout the Eastern United States. As our many satisfied customers have come to know, Atlantic Plywood offers not only products and services you can depend on but also a convenient, cost-effective partnership that helps our customers’ business grow. #Atlanticplywoodhiring

Job DescriptionDescription: General Job Summary: In addition to performing laser operation, ensures jobs are set-up to meet MPCD/customer requirements. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. • Understands and follows all applicable safety policies and procedures., • With Manufacturing Supervisor, schedule daily/weekly workload., • Download part program into machine controller., • Ability to perform adjustments of the tube laser to remedy slag, burn through, burrs, and un-desirable conditions., • Utilizes hand instruments (micrometers, calipers, height gage) to perform first piece/blue tag inspections., • Obtains inspection approval for each job., • Works with Engineering to resolve problems and production issues., • Train new Associates on equipment operation, department processes and procedures., • Ability to troubleshoot and resolve basic errors with the operation of the tube laser., • May be required to work/assist Maintenance with issues outside of basic errors/issues., • Ability to successfully load material and record production in Plex. Supervisory Responsibilities: None Requirements: Education High school diploma or general education degree (GED); One year certificate from college or technical school preferred or equivalent combination of education and experience. Experience 2-3 years related experience or training Computer Skills: None Other Requirements: Ability to use quality measurement devices such as micrometer, verniers, calipers height gauges. Language Skills: Intermediate Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or Associates of organization. Mathematical Skills: Basic Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Reasoning Ability: Intermediate Skills: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Physical Demands: The physical demands described here are representative of those that must be met by an Associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the Associate is regularly required to stand; walk; sit; maneuver through the office and factory; use hands to finger, handle, or feel; reach with hands and arms; grasping and twisting; talk or hear; lift and/or move equipment/product weighing up to 50 pounds. Work with another associate to lift anything greater than 50lbs. Work Environment: The work environment characteristics described here are representative of those an Associate encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. While performing the duties of this job the Associate is regularly exposed to extreme heat; extreme cold; wet and/or humid conditions. While performing the duties of this job the noise level in the work environment is usually loud. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities, and activities may change at any time with or without notice.

Job Description Must have Flexographic or Digital Print supervisory experience Our client is an expert in Pressure Sensitive labels, Labeling Systems, and Screen Printed products and specialize in printing on various materials, such as films, foils, and papers, using flexography, screen, and digital printing processes. Our labels are designed to endure tough conditions like water, oil, and extreme temperatures, ensuring they deliver your message effectively. With capabilities ranging from small to large quantities and numerous printing options, they are equipped to meet any label and printing needs. Job Summary: This is a full-time, on-site role located in Western, NY. The Manager of the Flexographic Print Department will oversee daily operations, ensure high-quality output, and manage a team of press operators in both flexo and digital print departments. Responsibilities include setting up and operating printing presses, maintaining equipment, ensuring adherence to quality standards, and managing production schedules. Additionally, the role involves troubleshooting issues and optimizing workflows for efficiency. The Flexographic Print manager will maintain equipment, uphold quality standards, and drive continuous improvement to meet production goals and client expectations. Job Responsibilities: • Oversee and streamline daily flexographic print operations, including setup, plate mounting, ink management, and press running, • Manage, train, and mentor press operators and prepress staff; schedule shifts and develop performance standards and KPIs, • Develop and implement training programs to boost team technical skills and efficiency, • Monitor and analyze production metrics—e.g., throughput, waste, downtime—to drive improvements, • Troubleshoot printing issues such as print defects, registration errors, and press malfunctions; ensure swift resolution, • Maintain equipment via regular inspections, maintenance schedules, and coordination of repairs., • Ensure safety and adherence to quality and regulatory standards within the press room, • Coordinate with prepress, packaging, quality control, maintenance, and other departments for seamless workflow., • Stay current on industry advancements (e.g., new press technology, plates, inks, software) and implement best practices, • Develop and execute quality and cost-control strategies, continuously improving productivity Requirements • 3+ years of experience in flexographic and/or digital printing processes, and manufacturing, required., • Ability to set up, operate, and maintain printing presses, • Hands-on expertise with flexo plates, anilox rolls, colors, ink, doctor blades, and registration systems, desired., • Strong understanding of quality control and production schedules, • Team management and leadership skills, • Mechanical aptitude and familiarity with press maintenance practices., • Problem-solving and troubleshooting abilities, • Excellent communication and organizational skills, • Experience in a similar role within the printing industry is required.Company DescriptionWe’re Infinia Search. We’re a relationship-driven search firm that proves that talent, ambition, curiosity, and an infinite work ethic creates exponential results for our clients and candidates.We’re Infinia Search. We’re a relationship-driven search firm that proves that talent, ambition, curiosity, and an infinite work ethic creates exponential results for our clients and candidates.

Job Description Atlantic Plywood is looking for a full-time Manufacturing Associate to join our team! The Manufacturing Associate position is responsible for operating panel lamination equipment as well as related warehouse activities. This individual should be a self-starter as well as a team player. Qualified candidates must be able to pick and sort materials by hand and with a forklift, package materials for shipment, participate in daily maintenance and care procedures. The objective of the laminating department is to increase efficiency, profitability, and customer satisfaction Other duties include, but are not limited to the following: • Pick, count, and sort raw materials for manufacturing, • Maintain Quality Control, • Maintain and clean automated press machinery, • Maintain a clean and safe working environment to increase efficiency, • Communicate and cooperate with supervisors and coworkers, • Operation and cleaning of manufacturing equipment, • Follow quality standards and comply with procedures, rules and regulations Job Requirements: • Authorization to work in the US, • High school diploma / GED, • Previous sitdown forklift experience, • Ability to lift 50-100 lbs, • Good understanding of safety procedures and use of personal protection equipment (PPE), • Good organizational and time management skills, • Must be able to work unsupervised as well as in a team, • Must be able to start early, work late occasionally as needed, • Experience in handling plastic laminate, • Automated Press Machine operation experience, • Quality control / inventory experience, • Frequent holding and grasping with the hands when loading and unloading equipment and while securing your load, • Frequent use of foot/feet, • Frequent lifting of 50 lbs.; occasional lifting up to 90 lbs., • Frequent pushing and pulling of truck side-curtain walls, • Frequent use of winch & ratchet strap tie-downs for load securement, • Exposure to bright lights, extreme temperatures, loud noise, dust, gas, and/or fumes Job Benefits • Morning Shift, • Weekends off, • 10+ Paid Holidays, • Accruable PTO, • 401(k) Program, • Company Paid Life Insurance, • Short- and Long-Term Disability Insurance, • Health, Dental, Vision, and Flexible Spending Insurance Plans, • A positive work environment with all team players, • Bonus incentives for employee referrals, • A stake in your company with our Employee Stock Ownership Plan (ESOP) About Us Since our inception in 1974, Atlantic Plywood Corporation has prided itself on delivering the highest quality and best value to our customers. This philosophy has helped us grow into a regional industry leader, distributing a wide range of quality hardwood plywood and panel products and solutions throughout the Eastern United States. As our many satisfied customers have come to know, Atlantic Plywood offers not only products and services you can depend on but also a convenient, cost-effective partnership that helps our customers’ business grow. #Atlanticplywoodhiring

Job DescriptionDescription: At American Packaging Corporation (APC), you’ll find the packaging career you’ve been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC’s longstanding success is fueled from the inside out. We’re constantly seeking to improve our internal operations and were named a “Best of the Best” in the Best workplaces in the America’s awards for 12 years in a row. It’s how and why we engage the best and brightest talent to continue propelling our shared success into the future. LOCATION: Rochester, NY SUMMARY: Use experience and skills to troubleshoot, repair, adjust and maintain manufacturing and ancillary equipment. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: • Troubleshoot, repair, adjust and maintain manufacturing and ancillary equipment., • Troubleshoot, repair, adjust and maintain hydraulic, pneumatic, mechanical, electrical and electronic systems., • Possess an ability to use monitoring and testing equipment to facilitate in the troubleshooting, repairing, adjusting, and maintaining of manufacturing and ancillary equipment., • It is the responsibility of the maintenance individual to further his abilities, skills knowledge to expand his capabilities in troubleshooting, repairing, adjusting and maintaining existing as well as new equipment and technology., • Responsible for working safely, follow LO/TO and electrical safety policies. OR 8 hour 12 days on 2 days off schedule of 11pm - 7am OR 3pm - 11pm Requirements: QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE Two-year certificate from college or technical school with a focus in machining and/or electronics; or two years related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. REASONING ABILITY Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. PHYSICAL DEMANDS While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel. The employee frequently is required to stand; walk; reach with hands and arms; stoop, kneel, crouch, or crawl; and talk or hear. The employee is occasionally required to sit, climb or balance, and taste or smell. The employee must occasionally lift and/or move more than 100 pounds. WORK ENVIRONMENT While performing the duties of this job, the employee is occasionally exposed to wet and/or humid conditions; moving mechanical parts; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; extreme cold; extreme heat; risk of electrical shock; risk of radiation; and vibration. The noise level in the work environment is usually moderate. American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at: .

Job DescriptionThe Installation Technician reports to the Installation Manager and is responsible for performing a range of HVACR installation jobs for commercial, and residential customers. Customer-based activities require an individual possessing traits of decisiveness, initiative, tact, judgment, integrity, dependability, and the ability to communicate in a technically credible manner. Job-related contact can occur with virtually all demographic groups, with the majority of working contacts being customers, other Hawn Heating & Air Conditioning, Inc. technicians, the Installation Manager, the Estimator and the Parts Runner. Benefits • Paid Training, • Careers Advancement Opportunities, • Flexible Scheduling, • Competitive Compensation, • Year-Round Work, • Serving as a member of ad hoc Installation Department teams which are organized to conduct HVACR installation jobs in an efficient and timely manner., • Performing routine HVACR installation activities without direct oversight or on-site assistance., • Assisting Senior Installation Technicians in training of new Hawn Heating & Air Conditioning, Inc. employees on installation related subjects, including callback prevention and installation protocols., • Conducting point-of-work sales of Indoor Air Quality services, unit components, unit replacements, add-on units, and referrals for the Hawn Heating & Air Conditioning, Inc. sales staff., • Conducting non-installation work in support of the IAQ and Service Departments, as assigned., • High school graduate and graduate of a post-secondary HVACR program of instruction of two or more years in duration., • One or more years of successful and full-time HVACR experience, either as a service or commercial installation technician., • Good oral and reading skills, including the ability to read and apply manufacturers' installation instructions and clearly communicate with residential, commercial, and industrial customers, suppliers, and other Hawn Heating & Air Conditioning, Inc. employees., • Physical ability to perform all duties noted above under the conditions, circumstances, and extreme weather conditions existent in (state)., • Interest and initiative in maintaining his/her HVACR skills through a combination of self-study, company training, manufacturers' workshops, and other professional development activities., • Interest and initiative in getting trained to develop point-of-service sales techniques including developing sales leads and conducting sales of unit replacements, add-on units, IAQ services, and service contracts., • Current (state) operator's license and the ability to operate all types of vehicles in the corporate fleet within 30 days of initial employment. Incumbent must be insurable by current Hawn Heating & Air Conditioning, Inc. insurance carrier., • Ability to work efficiently given time pressures, non-standard schedule, extreme weather conditions, varying customer needs and demands, and backlog constraints.

Job DescriptionBenefits: • 401(k) matching, • Competitive salary, • Dental insurance, • Free uniforms, • Health insurance, • Opportunity for advancement, • Paid time off Benefits • Paid Training, • Careers Advancement Opportunities, • Flexible Scheduling, • Competitive Compensation, • Year-Round Work, • Assisting the Service Manager in the planning, organization, motivation, control and coordination of human and other resources in support of the departmental jobs, assignments, and sales., • Leading by example an ad hoc service team in the timely, efficient, and profitable accomplishment of an assigned job or task., • Performing special and complex service jobs without assistance, including performing periodic on-call duties, as required., • Training Service Department and other Hawn Heating & Air Conditioning, Inc. employees on service-related subjects, including call-back prevention, servicing tips, and equipment protocols., • Conducting quality control inspections of Hawn Heating & Air Conditioning, Inc. service jobs, monitoring the technical progress of newly assigned service employees, including start-up oversight., • Conducting point-of-work sales of Indoor Air Quality services, unit components, unit replacements, add-on units, and residential service contracts., • Developing lead referrals for Hawn Heating & Air Conditioning, Inc. sales staff., • Conducting non-service, lead-tech level work in support of the Indoor Air Quality and Installation Departments, as assigned., • Assisting the Service Manager with administration, dispatching, and on-site evaluation work., • High school graduate and graduate of a post-secondary HVACR program of instruction of two or more years in duration., • Five or more years of successful and full-time HVACR experience, either as a commercial service or commercial installation technician., • Good oral and reading skills, including the ability to read and apply manufacturers' instructions and to clearly communicate with residential, commercial and industrial customers, suppliers, and all Hawn Heating & Air Conditioning, Inc. employees., • Physical ability to perform all duties noted above under the conditions, circumstances and extreme weather found in (state)., • Interest and initiative in maintaining and advancing his/her HVACR skills through a combination of self-study, company training, manufacturers' workshops, and other professional development activities., • Current (state) operator's license and the ability to operate all vehicles in the corporate fleet within 30 days of initial employment. Incumbent must be insurable by current Hawn Heating & Air Conditioning, Inc. insurance carrier, • Interest, initiative and ability to be trained in low-key point-of-service sales techniques, including developing sales leads, sales of unit replacements, add-on units, IAQ services, and service contracts., • Ability to work under pressure of time, non-standard schedule, supervision considerations, weather, customer needs, and backlog constraints.

Job DescriptionDescription: General Job Summary: Responsible for assembly/packing of sheet metal components of small or medium sized parts, fitting and/or adjustment of inter-related parts and/or assembly based on written specifications. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. • Follows all safety processes and procedures in accordance with job and Company requirements., • Following specific written instructions and/or blueprints, assembles components into finished product., • Disassembles and re-builds products per specifications., • Conducts quality checks following quality process instructions., • Pack and labels product following packaging instructions., • Ensures that the work area is clean, orderly, and safe., • Work in packaging as needed, including packing large assemblies or parts., • Inspect parts for defects or damage prior to packing., • Make boxes, apply labels, verify counts, and follow packing instructions., • Follow directions on packing from Packaging Lead., • Assists with other duties as assigned by supervisor/manager. Supervisory Responsibilities: None Requirements: Education High school diploma or general education degree (GED) Experience 2-4 years related experience or training or equivalent combination of education and experience. Other Requirements: Additional mechanical training and/or blueprint reading a plus. Ability to use hand tools such as screw drivers, sockets, Allen wrench, air drivers, tape dispenser and material handling equipment such as tow motor. Ability to read and understand blueprints, quality and packing instructions. Computer Skills: None required. Language Skills: Intermediate Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or Associates of organization. Mathematical Skills: Basic Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate. Reasoning Ability: Intermediate Skills: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Physical Demands: The physical demands described here are representative of those that must be met by an Associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the Associate is regularly required to sit; walk, stand for extensive periods of time, maneuver through the office and factory; use hands to finger, handle, or feel; reach with hands and arms; grasp and twist; talk or hear; and lift and/or or move equipment/product weighing up to 50 pounds. Utilize lift assist or work with another associate to lift anything greater than 50Ilbs. Must pass physical abilities test because of weight of assemblies being worked on. Work Environment: The work environment characteristics described here are representative of those an Associate encounter while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. The work environment may include humid conditions and extreme heat and cold. While performing the duties of this job the noise level in the work environment is usually loud.

Job Description Department: Food & Beverage Reports To: DRP Restaurant Manager, DRP Assistant Restaurant Manager, DRP Restaurant Supervisor Supervises: N/A Job Summary (Essential Functions): Ensures prompt and polite service to our members and guests. Serves as the liaison between the kitchen and servers. Facilitates the transportation of food items from the kitchen to the dining room floor with the support of food runners. Job Knowledge, Core Competencies, and Expectations: • Oak Hill Country Club's Acorns of Excellence., • Neatly groomed and dressed in accordance with Oak Hill Country Club's appearance standards., • Exceptional communication abilities when interacting with associates, guests, clients and internal departments to build relationships., • Must be able to work well under pressure in a high-volume setting where multitasking is required., • Works harmoniously and professionally with co-workers., • Must be able to work a flexible shift that includes early mornings, nights, weekends, holidays, split shifts, and extended shifts if needed. Expected to work 40-60 hours per week throughout the year and additional hours during event weeks., • All other duties as needed. Duties & Responsibilities: • Ensures all service stations in the kitchen are stocked and ready for service., • Maintains cleanliness of service stations in kitchen while ensuring that the kitchen is free from clutter and that the kitchen floor is a clean and safe work area., • Ensures that bread, soup and other food products are available., • Carefully matches all food items to correct orders., • Ensures that each food item has the appropriate side dishes and sauces., • Wipes up spills or drips on the rims of dishes and ensures the consistency of plate presentation., • Lines up the plates by seat number and directs the food runners., • Ensures plated hot food leaves the kitchen quickly., • Hand carries food to tables using the correct seat positions on the ticket when no food runner is available., • Ensures that the salad bar stays stocked, clean and in good working condition., • Ensures that all items in "to go" orders are correctly assembled and labels them by stapling the ticket to the bag., • Assists servers, food runners and server assistants throughout the course of service., • Assists server assistants in the dining room with clearing soiled dishes, filling waters and setting the dining room., • Breaks down and cleans service stations in the kitchen at the end of the shift., • Reports complaints to manager on duty when received., • Responsible for storing equipment and materials properly and in the correct areas., • Ensures that all storerooms and equipment storage areas are orderly and clean., • Inspects equipment for defects, cleanliness or any maintenance that needs to be completed and reports to supervisor., • Ability to develop and maintain awareness of occupational hazards and safety precautions; skilled in following safety practices and recognizing hazards., • Carries out bylaws and policies set by the Board of Directors., • Any, and all other duties, as assigned by the DRP Restaurant Manager, DRP Assistant Restaurant Manager, and/or DRP Restaurant Supervisor. Experience • Previous food & beverage experience preferred. Education • High school or equivalent education required. Licenses and Special Requirements • Valid driver's license., • Food safety certification., • Alcoholic beverage certification. Physical Demands and Work Environment • Regularly exposed to moving mechanical parts and outside weather conditions., • Occasionally exposed to wet and/or humid conditions; high, precarious places; extreme cold; extreme heat. The noise level in the work environment is usually moderate to loud., • Able to meet and perform the physical requirements of the job and to work effectively in an environment that is typical of this position., • Frequent lifting, bending, climbing, stooping, and pulling., • Must be able to lift 75 pounds., • Must be 18 years of age., • Must be able to follow written and verbal instructions., • Must have a reliable form of transportation to and from work. General Information Scheduled Shifts: Year round position. Days and hours are based on club operations and weather conditions. Wage: Competitive wage, based on experience

Job Description Position:CNC Mill Set-up Operator - PART TIME Reports to:Plant Manager Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning QS:9000, ISO:9002, and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol free working environment. General Job Description: Sets up and may operate horizontal and vertical CNC mills. Requires only general supervision. Minimum Qualifications: • Job knowledge through suitable education or prior work experience, • Able to read blueprints, • 4th axis experience, • Programming a must, • Know correct speeds and feeds, tooling, design and manufacture of fixtures Specific Duties: • Set up horizontal & vertical CNC mills, • Make proper set-up to give rigidity to work piece, • Work with materials such as cast iron, steel, bronze, brass and other non-ferrous materials, • Hold tolerances of .003 inch, • Manufacture and inspect part to blueprint, • Upkeep daily preventative maintenance log Physical Demands: 1. Must be able to lift up to 50 lbs regularly, 2. Requires frequent bending, stooping, squatting, pushing and pulling of parts and part containers, 3. May be required to stand for long periods of time, 4. May involve some repetitive motions, 5. Due to the open environment of the warehouse, must be able to work in various weather and temperature conditions to include extreme heat, humidity and cold This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties and responsibilities as it may be deemed necessary.

Job Description Department: Food & Beverage Reports To: DRP Restaurant Manager, DRP Assistant Restaurant Manager, DRP Restaurant Supervisor Supervises: N/A Job Summary (Essential Functions): Donald Ross Pub Attendants are front line personnel who assist our servers; the attendant's primary function is to set, clean and maintain the dining room before, during and after meal service. Job Knowledge, Core Competencies, and Expectations: • Oak Hill Country Club's Acorns of Excellence., • Neatly groomed and dressed in accordance with Oak Hill Country Club's appearance standards., • Exceptional communication abilities when interacting with associates, guests, clients and internal departments to build relationships., • Must be able to work well under pressure in a high-volume setting where multitasking is required., • Works harmoniously and professionally with co-workers., • Must be able to work a flexible shift that includes early mornings, nights, weekends, holidays, split shifts, and extended shifts if needed. Expected to work 40-60 hours per week throughout the year and additional hours during event weeks., • All other duties as needed. Duties & Responsibilities: • Assist the team in providing an exceptional service experience by adhering to Oak Hill food & beverage service standards, providing a five-star experience throughout., • Familiarize yourself with our food and beverage options and daily specials., • Promptly and discreetly clear and reset all tables., • Responsible for opening and closing processes which may include cleaning equipment, breaking down goods, storing and restocking items, etc., • Inspect and clean all china, glass, and flatware., • Promptly and effectively resolve any service issues that arise, seeking assistance from server or management where appropriate., • Work alongside, and in conjunction with, the Banquet Staff and Bartenders for Club events., • Develop a strong working knowledge of member names and preferences., • Ensure the cleanliness and organization of all dining room and back of house spaces., • Assist others in their duties, as needed., • Attend pre-shift meetings to learn shift particulars, and all other required meetings/trainings., • Consistently follow laws and the club's policies for the service of alcoholic beverages., • Carries out bylaws and policies set by the Board of Directors., • Any, and all other duties, as assigned by the DRP Restaurant Manager, DRP Assistant Restaurant Manager, and/or DRP Restaurant Supervisor. Experience • Previous food & beverage experience preferred but not required. Education • High school or equivalent education required. Licenses and Special Requirements • Valid driver's license., • Food safety certification., • Alcoholic beverage certification. Physical Demands and Work Environment • Regularly exposed to moving mechanical parts and outside weather conditions., • Occasionally exposed to wet and/or humid conditions; high, precarious places; extreme cold; extreme heat. The noise level in the work environment is usually moderate to loud., • Able to meet and perform the physical requirements of the job and to work effectively in an environment that is typical of this position., • Frequent lifting, bending, climbing, stooping, and pulling., • Must be able to lift 75 pounds., • Must be 18 years of age., • Must be able to follow written and verbal instructions., • Must have a reliable form of transportation to and from work. General Information Scheduled Shifts: Full-time and Part-time, year-round positions. Days and hours are based on club operations and weather conditions. Wage: Competitive wage, based on experience

Job Description Department: Food & Beverage Reports To: DRP Restaurant Manager, DRP Assistant Restaurant Manager, DRP Restaurant Supervisor Supervises: N/A Job Summary (Essential Functions): Our Donald Ross Pub Server is responsible for providing our members and guests with friendly, professional and expedient service to help create memorable dining experiences. Job Knowledge, Core Competencies, and Expectations: • Oak Hill Country Club's Acorns of Excellence., • Neatly groomed and dressed in accordance with Oak Hill Country Club's appearance standards., • Exceptional communication abilities when interacting with associates, guests, clients and internal departments to build relationships., • Must be able to work well under pressure in a high-volume setting where multitasking is required., • Works harmoniously and professionally with co-workers., • Must be able to work a flexible shift that includes early mornings, nights, weekends, holidays, split shifts, and extended shifts if needed. Expected to work 40-60 hours per week throughout the year and additional hours during event weeks., • All other duties as needed. Duties & Responsibilities: • Warmly and promptly welcome each member and guest, provide continuous five-star service throughout., • Confidently deliver enticing information regarding food and beverage options and daily specials., • Carefully attend to the details ensuring an understanding of member orders and special requests., • Accurately utilize the Point-of-Sale system (Jonas) to reflect the correct member and guest orders., • Communicate any special requests, special cooking instructions or food allergies to the culinary and/or beverage team., • Review each order, prior to service, to ensure it is to the members' specifications., • Provide an exceptional service experience by adhering to Oak Hill food & beverage service standards, clearing and resetting as needed throughout service., • Promptly and effectively resolve any service issues that arise, seeking assistance from management where appropriate., • Exhibit an exceptional knowledge of all Oak Hill food & beverage standards and operating procedures., • Complete pre-opening and closing tasks as assigned, side work., • Work alongside and in conjunction with the Banquet Staff and Bartenders for Club events., • Develop a strong working knowledge of member names and preferences., • Learn and maintain a working knowledge of food, liquor, beer, and wine., • Ensure the cleanliness and organization of all dining room and back of house spaces., • Assist others in their duties, as needed., • Be able to consistently perform tasks with little direct supervision., • Attend shift line up meetings to learn shift particulars, and all other required meetings/trainings., • Consistently follow laws and the club's policies for the service of alcoholic beverages., • Carries out bylaws and policies set by the Board of Directors., • Any, and all other duties, as assigned by the DRP Restaurant Manager, DRP Assistant Restaurant Manager, and/or DRP Restaurant Supervisor. Experience • Previous waitress, waiter or banquet server experience preferred., • Country club experience strongly preferred., • A genuine interest and passion for service, food, wine and spirits is a plus. Education • High school or equivalent education required. Licenses and Special Requirements • Valid driver's license., • Food safety certification., • Alcoholic beverage certification. Physical Demands and Work Environment • Regularly exposed to moving mechanical parts and outside weather conditions., • Occasionally exposed to wet and/or humid conditions; high, precarious places; extreme cold; extreme heat. The noise level in the work environment is usually moderate to loud., • Able to meet and perform the physical requirements of the job and to work effectively in an environment that is typical of this position., • Frequent lifting, bending, climbing, stooping, and pulling., • Must be able to lift 75 pounds., • Must be 18 years of age., • Must be able to follow written and verbal instructions., • Must have a reliable form of transportation to and from work. General Information Scheduled Shifts: Full-time & Part-time, year-round positions. Days and hours are based on club operations and weather conditions. Wage: Competitive wage, based on experience

Job DescriptionBenefits: • 401(k), • Employee discounts, • Opportunity for advancement At Central Bark, we value our employees as much as we value our furry friends. Our inclusive STAFF culture will focus on: Safety and wellbeing of dogs AND staff Teamwork Accountability FUN Friendly Central Bark will always invest in our team to encourage our culture. With a transparent structure in place, our management team will coach and assist you in maximizing your earning potential. Summary: Responsible for the care and handling of playgroups. We operate 365 days a year; employees are expected to work weekends and holidays in all types of weather. Approximately 60% of your time will be standing on your feet supervising play groups and cleaning up waste indoors and outdoors, 20% will be crating, feeding and bringing dogs to and from owners, and the remaining 20% is spent on general cleaning of the facility. Levels of responsibility will increase according to the level of the employee. Essential Duties and Responsibilities include the follow (other duties may be assigned): Caring for and supervising play groups of dogs including, playing with dogs, brushing, petting, holding, crating, leashing, collaring, clothing (when jackets are needed), applying first aid, feeding, medicating, cleaning up after dogs, etc. Works as a team member with others and management in providing dog daycare programs and sleepover services. Helps to ensure that customer satisfaction is consistently obtained. Helps to support the efficient and effective operation of the facility. Helps to maintain the highest company standards in the delivery of all services. Is directly responsible for duties as assigned by management. Cleaning duties such as cleaning up dog waste, sweeping, mopping, dusting, disinfecting, shoveling, cleaning crates, and bathing dogs. Is directly responsible for maintaining a clean and safe environment at all times for the dogs in our care. Is directly responsible for providing and documenting the appropriate information about individual dogs under his/her supervision on the shift change report. Is responsible for reading and knowing all Company Policies and Procedures. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. Education and/or Experience: Dog-handling skills are preferred. Skills may be in the form of pet ownership, previous pet ownership, working with animals, and attending dog training and/or behavior seminars. Training sessions and seminars may be scheduled during non-working hours where your attendance may be required. Physical Skills: Ability to perform a variety of demanding physical activities, including lifting a minimum of 50 pounds (whether it is a bag of dog food, a crate, or a dog), standing for long periods of time, and enduring extreme outdoor temperatures. Grasping, pinching, and pulling skills are also needed to leash and collar dogs as well as control them. Health: It is required that all employees are current on their Tetanus vaccination. Language Skills. Ability to read dog information including names, medication and feeding instructions, schedules, and the like. Be able to communicate dog issues with management either via written or oral communication. Computer Skills: A basic understanding of Windows-based applications is helpful. Reasoning Ability: An ability to define problems, analyze emergencies, and think on your feet. Dogs can get into scuffles at any time and it is the employees job to keep everyone safe. Reading dogs behavior and catching key indicators of possible conflict is a must to ensure the safety and well-being of the playgroup. Central Bark Henrietta, NY | Doggy Day Care (centralbarkusa.com)

Job Description Job Title: Repair Table Operator/ Titulo profesional: Operador de Mesa de Reparación Division: General Labor / Division: Trabajo General Department: Operations / Departamento: Operaciones Reports To: Shift Supervisor / Reportar a: Supervisor de Turno Summary: Repairs pallets using quality specifications by performing the following duties. Resumen: Reparar las paletas utilizando las especificaciones de calidad mediante la realización de las siguientes funciones: Duties and Responsibilities include the following. Other duties may be assigned. Funciones y Responsabilidades incluyen lo siguiente. Otras funciones pueden ser asignadas. 1. Operates repair equipment per standard operating procedures.* Operar equipo de reparación de acuerdo con los procedimientos operativos estandar.* 2. Meets production quotas within a reasonable training/retraining time period.* Cumplir con las cuotas de producción dentro de un entrenamiento razonable/ periodo de tiempo para re-entrenamiento.* 3. Ensures housekeeping of equipment and surrounding area is acceptable per standard operating procedure.* Asegurar la limpieza de los equipos y el área de los alrededores es aceptable por procedimiento operativo estándar.* 4. Follows safety standard operating procedures and maintain proper use of all personal protective equipment at all time of operation.* Seguir los procedimientos operativos de seguridad estándar y mantener el uso correcto de todos los equipos personales de protección en todo momento de la operación.* 5. Generates accurate production reporting for supervisor.* Generar informes de producción precisos para el supervisor.* 6. Maintains possession and good condition of assigned tools and nails.* Mantener posesión y la buena condición de herramientas y clavos asignados.* 7. Alerts supervisor of potential maintenance and/or safety concerns.* Alertar al supervisor de problemas potenciales de mantenimiento y/o de seguridad.* 8. Receives and follows designated job processes and safety trainings.* Recibir y seguir procesos designados de trabajo y entrenamiento de seguridad.* 9. Performs assigned preventive maintenance of equipment.* Llevar a cabo el mantenimiento preventivo de los equipos asignados.* 10. Performs other related duties as assigned. Realizar otras tareas afines que le sean asignadas.* Qualifications: / Cualificaciones To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Para realizar este trabajo con éxito, un individuo debe ser capaz de realizar cada función esencial satisfactoriamente. Los requisitos enumerados a continuación son representativos de los conocimientos, destrezas y/o la habilidad necesaria. Adaptaciones razonables se pueden hacer para permitir a las personas con discapacidad llevar a cabo las funciones esenciales. Language Ability: / Habilidad de Lenguaje: Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Habilidad para leer y comprender instrucciones simples, correspondencia corta, y notas. Habilidad para escribir correspondencia simple. Habilidad para presentar con eficacia la información en uno – a – uno y grupos pequeños de situaciones para los clientes, clientes y otros empleados de la organización. Math Ability: /Habilidad de las Matemáticas: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Habilidad para sumar, restar, multiplicar, y dividir en todas las unidades de medida, usando números enteros, fracciones comunes, y decimales. Habilidad para calcular tarifas, relación, y el porcentaje y dibujar e interpretar graficas de barras. Reasoning Ability: / Habilidad de Razonamiento: Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. Habilidad para aplicar sentido común y el entendimiento para llevar a cabo detallado pero no involucrado instrucciones escritas u oral. Habilidad para bregar con problemas envolviendo algunas variables concretas y situaciones estandarizadas. Education/Experience: / Educacion/ Experiencia: High school diploma or general education degree (GED); or equivalent combination of education and experience. Diploma de Escuela Secundaria o un grado en educación general (GED); o una combinación equivalente de educación y experiencia. Equipment: / Equipo: • Hammer / Martillo, • Nail gun / Pistola de clavos, • Sawzall / Sawzall, • Screw gun / Pistola de tornillos Physical Demands: / Demandas Físicas: *Essential Function © 2016 Millwood, Inc. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, use hands, and reach with hands and arms. The employee is frequently required to walk and talk or hear. The employee is occasionally required to stoop, kneel, crouch or crawl. The employee must regularly lift and/or move up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, and ability to see color. Las demandas físicas descritas aquí son representativas de las que se deben cumplir por un empleado para realizar con éxito las funciones esenciales de este trabajo. Adaptaciones razonables se pueden hacer para permitir a las personas con discapacidad realizar las funciones esenciales. Mientras desempeñan los deberes del trabajo, se requiere regularmente del empleado pararse, usar las manos y alcanzar con los brazos y manos. Con frecuencia se requiere del empleado caminar, y hablar o escuchar. Se requiere del empleado ocasionalmente agacharse, arrodillarse, agacharse o arrastrarse. El empleado debe levantar regularmente y/ o mover hasta 75 libras. Habilidades específicas de visión requeridas para este trabajo incluye visión cerca, la visión de lejos, visión periférica, y la habilidad para ver el color. Work Environment: / Ambiente de Trabajo: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to work near moving mechanical parts. The employee is frequently exposed to fumes or airborne particles. The employee is occasionally exposed to wet or humid conditions (non-weather), outdoor weather conditions, extreme cold (non-weather), and extreme heat (non-weather). Las características del ambiente de trabajo que se describen aquí son representativas de las que un empleado encuentra en el desempeño de las funciones esenciales de este trabajo. Adaptaciones razonables se pueden hacer para permitir a las personas con discapacidad realizar las funciones esenciales. Mientras desempeñan los deberes del trabajo, el empleado es expuesto regularmente a trabajar cerca de partes mecánicas en movimiento. El empleado es expuesto frecuentemente a gases o partículas en el aire. El empleado es ocasionalmente expuesto a condiciones húmedas o mojadas (no el clima), condiciones climáticas externas, extremadamente frio (no el clima), y el calor extremo (no el clima). The noise level in the work environment is usually loud. El nivel de ruido en el ambiente del trabajo es usualmente alto.

Job DescriptionRED-Rochester is a multi-utility generation plant and district energy supplier to one of the world’s most comprehensive industrial parks: the Eastman Business Park. Supporting a 1,200-acre campus, RED-Rochester has the utilities, infrastructure, technical services, support services, space and complementary regional resources to benefit a wide range of industry verticals. We are seeking a Utilities Mechanic – Rotating Machinery who enjoys the challenge of large scale, industrial machinery maintenance. Our infrastructure consists of a blend of classic and modern industrial assets and requires a person with broad industrial and utilities expertise – able to collaborate and work well with others; able to communicate professionally both up and down the organization; and able to work with other departments and contractors to achieve success. The Utilities Mechanic – Rotating Machinery is responsible for maintaining and repairing mechanical equipment essential to utility operations, with a primary focus on rotating machinery. The role is critical in ensuring the reliability and performance of systems that power Eastman Business Park’s extensive infrastructure. Essential Duties and Responsibilities • Install, troubleshoot, maintain, and repair rotating mechanical equipment, including:, • Pumps (centrifugal and positive displacement), • Motors, compressors, turbines, gearboxes, and blowers, • Steam and condensate system components, • Conduct preventive and predictive maintenance on rotating machinery, • Align, balance, and test equipment using tools such as dial indicators, laser alignment systems, and vibration analyzers, • Maintain detailed records of work performed using CMMS (Computerized Maintenance Management System), • Collaborate with engineers, operators, and other maintenance personnel to resolve equipment issues, • Adhere to all safety policies and procedures; participate in safety audits and toolbox talks, • Support equipment upgrades, turnarounds, and emergency response efforts, • Use of hoists, pulleys, dollies, rollers, trucks, overhead cranes and rigging, lathes, & shop equipment., • All sizes of Pumps from single stage low pressure centrifugal to multi-stage high-pressure (up to and beyond 2000PSI)., • Refrigeration Units – General Mechanic systems, Bearing and Seal work., • Steam Turbines (5-1400PSI) to drive all styles of utilities generation rotating equipment., • Equipment auxiliary systems such as: Lube oil lubrication, Hydraulic oil, Speed control & governing, Various cooling water and Storage systems. Education and/or Experience: * High school diploma/GED * 10 years of applicable utilities mechanic or millwork experience (or comparable Military Service experience within defined trade). * Trade school or technical certification in mechanical maintenance Qualifications or Licenses: • Must obtain required safety operator licenses, as needed for fork truck, man lift and scissor lift within 12 months (Employer Provided), • Immediately obtain OSHA 10hr certification., • Must obtain OSHA 30hr certification within 12 months., • Industrial environment/power plant/treatment plant atmosphere, • Working outside in all weather conditions from street level to roof tops., • Possibility of temperatures ranging from extreme cold to over 100 degrees., • Work will take place in chemical areas, noisy areas and areas that may be very dirty, • Aspects of your job may include possible exposure to Hazardous Materials, such as Asbestos, Lead paint, and other chemicals or waste products. All required PPE and safety training will be provided to eliminate associated risks.Physical Demands, • Ability to lift up to 50 lbs., • Work in confined spaces and at heights, • Stand, kneel, and crouch for extended periods, • Work outdoors in varying weather conditions

Job Description Job Title: Field Construction Inspector (FCI) Location: Rochester, NY Job Type: Full-time FLSA Status: Hourly; Non-Exempt Reports To: District Manager Travel: Yes, travel is expected for this position (50% - 85% on average). Supervisory Responsibility: No Compensation: Negotiable, based on skills and experience. Company Profile: National Railroad Safety Services, Inc. (NRSS) is a certified DBE/WBE firm primarily focused on providing safety services to the railroad industry. NRSS is the most trusted name in the railroad industry for providing qualified field safety staff and safety training. To best serve the railroad industry, NRSS provides all these services in the continental United States, Canada, and Mexico. NRSS has the proven ability and the proven safety record to handle any project. Find the safety you have been missing today! Job Description: National Railroad Safety Services, Inc. (NRSS) is seeking a Field Construction Inspector (FCI) to support railroad safety services for Class 1 Railroads, Regional Short Lines, Transit Systems, State DOT's, as well as Railroad Suppliers, Contractors, and Consultants alike. Required Education: High school diploma or equivalent. Required Experience: Minimum 2 years of experience in one or more of the following, civil construction inspection involving grade separation projects, roadway paving/construction, utility work and/or experience with a Freight Railroad, Regional Short Line Railroad, Transit System, State DOT Highway or Rail Division, Railroad Supplier, Highway/Railroad Contractor, and/or Civil Engineering/Railroad Consultant. Key Success Factors: • Accountability: Accept full responsibility for self and contribution as a team member., • Adaptability & Flexibility: Ability to consider a variety of issues that exist in the workplace and change from one task to another as necessary., • Analytical Thinking: Ability to analyze and synthesize information to understand issues, identify options, and support sound decision making., • Attention to Detail: Ability to work in a conscientious, consistent, thorough manner, and attend to details while pursuing quality when accomplishing tasks., • Communication: Ability to clearly convey information and ideas through a variety of media to employees/clients in a clear and succinct manner., • Customer Service Focus: Ability to provide service excellence to internal and/or external clients., • Decision Making: Ability to identify/understand issues, problems, opportunities and take appropriate action based on available facts, constraints, and probable consequences., • Initiative: Ability to identify what needs to be done and act before being asked., • Innovativeness: Ability to devise new plans for quality excellence., • Knowledge: Ability to navigate various construction plans, OSHA/Railroad rulebooks and/or regulations and demonstrate mastery., • Organization: Ability to maintain materials and/or records in a clean and ordered manner., • Planning: Ability to plan and prioritize workload to manage time effectively and accomplish assigned tasks., • Stress Tolerance: Ability to maintain stable performance under pressure or opposition (such as time pressure or job ambiguity)., • Teamwork: Promote cooperation and commitment within a team environment to achieve goals and deliverables, • Thoroughness: Ability to ensure that one's work is complete and accurate. Job Requirements: • Proficient computer skills in basic email, phone, and text message applications., • Proficient computer skills in Android OS; on tablet & smart phone., • Proficient computer skills in Citrix Applications., • Strong oral and written communication skills., • Strong technical knowledge in Civil Highway Construction, or Railroad Engineering, Railroad Design, Railroad Construction, and Safety., • High level of accuracy and attention to detail; well organized., • Demonstrated ability to develop and maintain strong client relationships., • Ability to travel for extended periods of time; sometimes week(s) at a time., • Ability to successfully complete Federal, Client, and/or Company Specific Training. Job Duties: • Provide jobsite coordination., • Provide clear and concise communication with Railroad Personnel, and/or Contractor personnel., • Provide clear, concise, and thorough safety briefings with all personnel on each job site., • Enforce all Railroad, State, and Federal Policies., • Identify rule violations and resolve in accordance with Railroad, State, and Federal Policies., • Enforce Contractor training requirements., • Submit daily field reports detailing Contractor and/or Railroad activities., • Enforce Project Site Safety in accordance Federal, State, Local and Railroad polices. Work Environment: This job operates in a field environment. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Must be able to hear, speak, read, and write clearly in English., • Must be able to drive long distances and/or travel by other modes as necessary., • Must be able to stand for long periods of time and/or walk on level/uneven ground., • Must be able to see up close, distances, colors and have use of peripheral vision and depth perception., • Must be able to tolerate extreme heat/cold temperatures., • Must be able to tolerate dusty/noisy conditions. Keywords: Civil Engineer, Construction Inspector, Construction Foreman, Construction Manager, Project Superintendent, Civil Engineering Technician, Safety Manager, Safety Inspector, Assistant Division Engineer (ADE), Assistant General Manager (AGM), Assistant Roadmaster, Bridge Inspector, Bridge Manager, Bridge Maintainer, Bridge Supervisor, Division Engineer (DE), Employee In Charge (EIC), Flagger, Flagging, Flagman, Flagmen, Flag Person, Foreman, Foremen, General Manager (GM), Maintenance Of Way (MOW), Manager Track Maintenance (MTM), Manager Track Projects (MTP), Rail, Railroad, Railroad Project Manager, Railway, Railway Project Manager, Roadmaster, Roadway Worker, Roadway Worker In Charge (RWIC), Roadway Worker Protection (RWP), Safety, Signal Inspector, Signal Maintainer, Signal Manager, Signal Supervisor, Track Inspector, Track Maintainer, Track Manager, Track Supervisor. Safety Commitment: All employees of all levels are to always remain committed to safety while employed at National Railroad Safety Services, Inc. (NRSS). As such, no job is so important, and no service is so urgent that we may not take the time to perform all work safely. Simply put, safety is our way of life. By placing safety first, we not only ensure the wellbeing of our employees, customers, and communities, but we hold true to our commitment to being the leader in safety throughout the railroad industry. Closing Statement: National Railroad Safety Services, Inc. (NRSS) is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/orientation, gender identify, age, veteran status, national origin, or any other status protected by law or regulation. Job Posted by ApplicantPro

Job DescriptionDescription: At American Packaging Corporation (APC), you’ll find the packaging career you’ve been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC’s longstanding success is fueled from the inside out. We’re constantly seeking to improve our internal operations and were named a “Best of the Best” in the Best workplaces in the America’s awards for 12 years in a row. It’s how and why we engage the best and brightest talent to continue propelling our shared success into the future. LOCATION: Rochester, NY SUMMARY: Provide engineering duties as assigned by Plant Engineer and/or Plant Manager. Responsible for overseeing new equipment installations as well as modifications to existing equipment as assigned by Plant Engineer. Maintain PLC, HMI, and Drive programming software. Provide detail drawings of parts that need to be manufactured in our shop or by an outside machine shop. Oversee plant engineering duties in the Plant Engineer’s absence. Troubleshoot and repair equipment problems that effect productivity of the manufacturing group. Be involved with process improvements providing input in production problem solving. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: • Providing detail drawings., • Active in troubleshooting electrical, electronic, and mechanical problems in a manufacturing environment., • Well versed in PLC and HMI programming., • Well versed in digital and analog AC/DC drive design, programming and installation., • Well versed in computer (PC) fundamentals, including communication protocols, Microsoft Operating systems and Microsoft Office software., • Manage new equipment installations and startups., • Design, install and startup equipment modifications., • Negotiate price and purchase equipment and services as needed., • Draft capital expenditure requisitions - gather information for justification of capital, obtain cost of capital items., • Fill out project item listings., • Provide managerial input to the maintenance department as well as outside contractors., • A fundamental understanding of regulations including OSHA, NFPA, NEC, EPA, and WDNR., • Responsible for working safely and being a safety leader. Directly supervises employees in the Maintenance Department in the absence of the Maintenance Manager. Carries out supervisory responsibilities as necessary in accordance with the organization's policies and applicable laws. Responsibilities include training employees; planning, assigning, and directing work; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems. Requirements: QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and EXPERIENCE: A bachelor's degree, Associate's degree, or equivalent in a related field is required. An additional year of relevant full-time experience and/or training is preferred. LANGUAGE SKILLS: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. MATHEMATICAL SKILLS: Ability to work with mathematical concepts such as Ohm’s Law, probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. REASONING ABILITY: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. PHYSICAL DEMANDS: While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel. The employee frequently is required to sit and talk or hear. The employee is occasionally required to stand; walk; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; and hear, taste or smell. This position may require manual lifting not to exceed 50 lbs – reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. WORK ENVIRONMENT: While performing the duties of this job, the employee is occasionally exposed to wet and/or humid conditions; moving mechanical parts; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; extreme cold; extreme heat; risk of electrical shock; risk of radiation; and vibration. The noise level in the work environment is usually moderate. American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at: .

Job Description Lifetime Assistance – Financial Quality Associate Make an Impact. Create Joy. Shape the Future. At Lifetime Assistance, our mission is to foster independence, dignity, and respect for individuals with intellectual and developmental disabilities. Working with us goes beyond just a job—it’s a chance to transform lives, including your own. Position Overview: Job Title: Financial Quality Associate Location: Rochester, NY Department: Quality Assurance/Quality Improvement (QA/QI) Reports To: VP QA Improvement Employment Type: Full-Time, 40 Hours - Days Starting Wage: $21.55 - $24.62 per hour plus mileage reimbursement Why You Should Work for Lifetime Assistance? • No-Premium Health Insurance: Access comprehensive healthcare without added cost., • Education Support: Tuition assistance, scholarships — 50% off tuition for two courses per semester plus up to $3,000 scholarship per semester — plus micro-credential stipends up to $750 and SUNY partnerships., • Paid Training: Immersive learning, e-learning, and ongoing paid training., • Career Growth: Clear pathways to advancement, leadership training, and coaching support., • Work-Life Harmony: Generous paid time off and supportive scheduling., • Conduct financial audits across homes., • Review ledgers, bank statements, in-house accounts, receipts, and change returns to ensure accuracy., • Verify compliance with agency processes for:, • Banking needs forms, • Withdrawals from savings → house accounts → manager/staff use, • Receipt tracking with signatures, • Change reconciliation down to the penny, • Audit purchases on Wegmans/Walmart cards and gas cards to identify theft or misuse., • Check for compliance with OPWDD/Medicaid standards to avoid citations., • Provide on-the-spot training when errors are identified, while still documenting and citing all findings., • Collaborate with a team of six QI professionals specializing in different audit areas (finances, medical, physical plant, etc.)., • Support the agency’s goal of completing two audits per year across main service areas, with medical reviews at least annually., • Prepare detailed reports with recommendations for corrective action and follow-up to ensure resolution., • Partner with program managers and frontline staff to strengthen financial accountability and operational efficiency., • Maintain confidentiality and professional integrity while managing sensitive financial data. What You Bring: • Strong financial skills: balancing ledgers, reconciling accounts, and reviewing checkbooks., • Extreme attention to detail — every penny and every receipt matters., • Confidence to cite errors, follow through with corrections, and hold staff accountable., • Ability to teach and support staff while maintaining compliance., • Excellent written and verbal communication skills for documentation and staff guidance., • Nonprofit/OPWDD experience a plus, but not required (rules can be taught)., • Degree not required — practical money management skills are most important., • Strong organizational skills with ability to manage multiple audits simultaneously., • Proficiency with Microsoft Excel, Word, and data entry systems., • Mission-Driven Work: Empowering individuals to live with independence and purpose—here, your work truly matters., • Inclusive & Supportive: A workplace built on respect, dignity, and a shared vision of inclusion. If you’re a compassionate professional ready to use your skills to ensure accountability, quality, and excellence in services that truly change lives, apply today and join us in building lives of independence—one person at a time. Equal Opportunity Employer Lifetime Assistance is proud to be an Equal Employment Opportunity employer. We celebrate diversity and are committed to inclusive hiring practices without regard to race, religion, gender, age, disability, or other protected characteristics. “I am part of something bigger… Being a Lifetime Assistance employee means everything to me.” — Kimberly C, Family Coordinator of Community Services, celebrating her 30th year with us

Job Description SUMMARY: The Associate Store Team Leader is responsible for the overall day-to-day operations of the store assuring that safety, sales, production, programs and services, and other standards are maintained. This position will also partner with other members of the Retail Administration team, People Resources and Workforce Development to ensure that all activities performed are in a manner consistent with the mission, vision, and values of Goodwill. Subscribes to and promotes Goodwill's mission and values. Functions as an active Retail Division team member to achieve organization and department goals. Competencies needed to be successful in this job include: Customer Focus, Developing Others, Interpersonal Skills, Self Development, Communication & Collaboration, Process/Project Management, Sense of Urgency, Business Acumen and Functional/Technical Skills. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Under the direction of the Director of Donated Goods Retail, manages the fiscal and operational functions of assigned store. Partners with People Resources, Finance and Logistics to accomplish people, loss prevention, and safety responsibilities. The Associate Store Team Leader is specifically responsible for:, • Achieves budgeted revenue goal;, • Achieves revenue to expense ratio target;, • Delivers budgeted surplus target;, • Adheres to percent labor to sales metric; and, • Ensures compliance with Organization Safety standards., • Ensures that all store team members are trained and up-to-date in required Goodwill operating policies, required in-store safety programs and on-the-job training experiences;, • Demonstrates the highest level of customer service in all activities;, • Reviews customer concerns and resolves them appropriately within established guidelines, • Submits required information on production, distribution of labor, safety, and any team member related paperwork as required and within stated timeframes;, • Liaise with People Resources on employee relations issues for Store to ensure fair employee practices that are aligned with Goodwill’s mission, vision and values., • Assures that loss prevention programs are adhered to, implemented in-store and are within Goodwill established standards., • Manages a broad range of store activities:, • Ensures that established standards, plans, plan-o-grams, and advertising/signage are implemented and maintained;, • Ensures polite and courteous acceptance of donations., • Ensures complete processing of donations, both hard goods and clothing., • Monitors the stock level of store merchandise and works with Assistant Team Leaders to adjusts as necessary:, • Reviews applications, interviews, selects and completes new hire process for team members., • Prepares employee schedules and ensures adequate staffing is maintained for the store and stays within the boundaries of payroll budget through the store metrics; and, • Conducts team members performance reviews with input from other members of retail management, and director of DGR for retail management., • Trains and develops retail management teams for growth and more responsibility., • Ensures safe work practices are followed at all times:, • Ensures the facility is neat, clean, and organized to prevent injury or accident., • Ensures employees, volunteers, community service personnel and others use safe work methods at all times., • Provides safety training to all new employees and administers on-going training to all store personnel., • Adheres to organizational values, ensuring that they are practiced daily in all store operations and interactions., • Ensures effective communication with store team, program participants, community and customers., • Acts as a positive role model for employees, trainees, and customers in all aspects of professional performance;, • Cooperates with Workforce Development and People Resources departments to maximize the benefits of those services to retail employees., • Ensures that store equipment is kept in proper working order. Promptly notify Maintenance Supervisor of defects, or IT Manager of problems with computer systems and e-mail., • Maintains interior and exterior of store in a neat, clean, organized manner (including but not limited to vacuuming, dusting, cleaning bathrooms, mopping floor), • Contributes to the overall effectiveness of Goodwill of the Finger Lakes and the retail store by completing all other tasks as assigned. SUPERVISORY RESPONSIBILITIES: Manages members of the store management team, who supervise processes and procedures and team members in assigned operations. Is responsible for the overall direction, coordination and evaluation of this store. Also manages non‑supervisory employees. Carries out supervisory responsibilities in accordance with the organization's policies and applicable laws. Responsibilities include interviewing, hiring and training employees; planning, assigning and directing work; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems. QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to demonstrate proficiency in meeting competencies required for position; able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed below are representative of the knowledge, skill and/or ability required. EDUCATION and/or EXPERIENCE: Bachelor’s Degree or equivalent preferred. A minimum of four years' progressive business experience required, retail experience required. Minimum of two years supervisory experience required. Or equivalent combination of education and experience. COMPUTER SKILLS: Must be proficient in Word, Excel and Outlook. LANGUAGE SKILLS: Able to read, analyze and interpret general business periodicals, professional journals, technical procedures or governmental regulations. Writes business correspondence. Presents information and responds to questions from groups of managers, clients, customers and the general public. Employee must be an effective communicator. MATHEMATICAL SKILLS: Able to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages and sales volume. Able to apply financial and budgeting concepts. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee occasionally works in outside weather conditions while receiving donations or traveling between sites. The employee is occasionally exposed to dusts, molds and dirt while handling donated materials and to extreme cold in the backroom during the winter. The noise level in the work environment is usually moderate. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Physical Demands- Associate Store Team Leader Frequency Never Almost Never Occasionally Frequently Often Sitting X Standing X Walking X Bending over X Crawling X Reaching Overhead X Crouching X Kneeling X Balancing X Lifting and Carrying 10 lbs. or less X 11 to 25 lbs. X 26 to 50 lbs. X 51 to 75 lbs. X 76 to 100 lbs. X over 100 lbs. X Push/ Pull Max Force 0 to 20 lbs. X 21 to 39 lbs. X 40 to 59 lbs. X 60 to 100 lbs. X

Job DescriptionShifts available 7 days a week - Qualified Applicants should be interested in growing their knowledge of dog training and behavior. Expressed interest in becoming a dog trainer preferred. Central Bark always looks to grow from within! Please send cover letter to Looking for a part-time Doggy Day Care Attendant and Enrichment Specialist to join Central Bark Henrietta! Summary: Responsible for the care and handling of playgroups. We operate 365 days a year; employees are expected to work weekends and holidays in all types of weather. Approximately 60% of your time will be standing on your feet supervising play groups and cleaning up waste indoors and outdoors, 20% will be crating, feeding and bringing dogs to and from owners, and the remaining 20% is spent on general cleaning of the facility. Levels of responsibility will increase according to the level of the employee. Essential Duties and Responsibilities include the follow (other duties may be assigned): • Caring for and supervising play groups of dogs including, playing with dogs, brushing, petting, holding, crating, leashing, collaring, clothing (when jackets are needed), applying first aid, feeding, medicating, cleaning up after dogs, etc., • Works as a team member with others and management in providing dog daycare programs and sleepover services., • Helps to ensure that customer satisfaction is consistently obtained. Helps to support the efficient and effective operation of the facility. Helps to maintain the highest company standards in the delivery of all services. Is directly responsible for duties as assigned by management., • Cleaning duties such as cleaning up dog waste, sweeping, mopping, dusting, disinfecting, shoveling, cleaning crates, and bathing dogs. Is directly responsible for maintaining a clean and safe environment at all times for the dogs in our care., • Is directly responsible for providing and documenting the appropriate information about individual dogs under his/her supervision on the shift change report., • Is responsible for reading and knowing all Company Policies and Procedures. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. Education and/or Experience: Dog-handling skills are preferred. Skills may be in the form of pet ownership, previous pet ownership, working with animals, and attending dog training and/or behavior seminars. Training sessions and seminars may be scheduled during non-working hours where your attendance may be required. Physical Skills: Ability to perform a variety of demanding physical activities, including lifting a minimum of 50 pounds (whether it is a bag of dog food, a crate, or a dog), standing for long periods of time, and enduring extreme outdoor temperatures. Grasping, pinching, and pulling skills are also needed to leash and collar dogs as well as control them. Health: It is required that all employees are current on their Tetanus vaccination. Language Skills. Ability to read dog information including names, medication and feeding instructions, schedules, and the like. Be able to communicate dog issues with management either via written or oral communication. Computer Skills: A basic understanding of Windows-based applications is helpful. Reasoning Ability: An ability to define problems, analyze emergencies, and think on your feet. Dogs can get into scuffles at any time and it is the employees’ job to keep everyone safe. Reading dog’s behavior and catching key indicators of possible conflict is a must to ensure the safety and well-being of the playgroup. At Central Bark, we value our employees as much as we value our furry friends. Our inclusive STAFF culture will focus on:· Safety and wellbeing of dogs AND staff· Teamwork · Accountability· FUN· Friendly Central Bark will always invest in our team to encourage our culture. With a transparent structure in place, our management team will coach and assist you in maximizing your earning potential. Central Bark Henrietta, NY | Doggy Day Care (centralbarkusa.com)

Job Description Department: Grounds Reports To: Director of Agronomy/E/W Superintendent Supervises: Subordinates and seasonal hires Job Description: Maintain golf courses and landscaping around the course, clubhouse and other club facilities, including parking lots. Education and/or Experience • 2 to 4 year degree, or certificate in turf management, or related field at an accredited university or in the process of obtaining Job Knowledge, Core Competencies and Expectations • Individuals must have 1-2 years golf course maintenance experience, • Experience with hand watering, chemical and fertilizer applications and calibration, • Possess a positive attitude, • Passion for the turf industry,, • A strong desire to learn and be a team player. Job Tasks/Duties • Plants and maintains ornamental shrubs and trees., • Trims and feeds shrubs and trees; removes cuttings., • Maintains landscape beds around clubhouse and club grounds., • Rakes and blows leaves., • Mows greens, tees, C/A by operating walk-behind turf equipment., • Mows fairways and roughs by operating large scale ride on turf equipment, • Operates tractors and various implements, • Prepares and lays sod., • Prepares soil plant beds and establishes plantings by seed or transplants., • Rakes bunkers., • Loads and unloads materials., • Repairs and maintains driving range tees., • Cleans equipment used in practice area., • Aerifies and spikes greens., • Digs holes and trenches to maintain or construct irrigation and drainage lines., • Installs pipe and backfills excavations., • Empties garbage cans., • Attends staff meetings., • Participates in perticide and fertilizer applications, • Supervises small crews, typically of 4-8 individuals throughout the property, • Valid driver's license. Physical Demands and Work Environment • Regularly exposed to moving mechanical parts and outside weather conditions., • Occasionally exposed to wet and/or humid conditions; high, precarious places; extreme cold; extreme heat; risk of electrical shock; and vibration. The noise level in the work environment is usually moderate to loud., • Able to meet and perform physical requirements and to work effectively in an environment which is typical of this position., • Frequent lifting, bending, climbing, stooping and pulling., • Must be able to continuously sit, stand and walk for a minimum of 8 hours., • Must be able to lift to 100 pounds and perform strenuous work., • Must be able to bend, kneel, push and pull over the course of a shift., • All employees must maintain a neat, clean and well-groomed appearance per Oak Hill's appearance standards., • Will be required to perform job functions outdoors and be exposed to sun, heat, humidity and other elements., • Must be able to work a flexible shift that includes early mornings, nights, weekends, holidays, split shifts, and extended shifts., • Must be 18 years of age. General Information Scheduled Shifts: Full time, position. Days and hours based on club operations. Wage: Competitive hourly wage based on experience

Job DescriptionSummary: Responsible for training dogs as part of Central Barks Group Classes, and Training Tutor PLUS. We operate 365 days a year; employees are expected to work weekends and evenings in all types of weather. Approximately 50% of your time will be standing on your feet running group classes and/or training individual dogs. 20% will be administrative including fielding enrollments, scheduling, taking payments, and various reporting. 20% will be spent on general cleaning of the training facility areas and equipment. 10% will be spent interacting with parents, including before and after classes, to promote other Central Bark services including Enrichment Day Care, Sleepover, Stay & Play, Grooming, and suggesting high-quality training tools and supplies available for purchase in the Market area. Essential Duties and Responsibilities include the following (other duties may be assigned): • Training dogs and enriching dogs lives according to the latest science-based dog behavior and training knowledge to further our mission of providing Whole Dog Care and Enrichment to every dog and family we serve., • Staying up to date on dog behavior and training topics through continuing education over time., • Using force-free, reward-based training methods at all times. Aversive methods may not be used., • Training and enriching the lives of dogs and people in both individual and group settings., • Responsible for educating staff on dog training best practices to be implemented by the entire Central Bark team., • Duties and responsibilities may include training dogs on various cues and behaviors, working on group play skills to increase safety (individually and in a playgroup setting during Enrichment Day Care), engaging in enrichment activities, playing with dogs, and providing basic care such as brushing, petting, holding, crating, leashing, collaring, clothing (when jackets are needed), applying first aid, feeding, medicating, cleaning up after dogs, etc., • Maintaining a clean and safe environment for dogs and people at all times. These duties may include but are not limited to cleaning up dog waste, sweeping, mopping, dusting, disinfecting, cleaning crates, etc., • Is directly responsible for providing and documenting the appropriate information about individual dogs and clients under their care including enrollments, payments, scheduling, and sending training report cards to owners., • Working as a team member with fellow employees and management to provide the highest quality experience for both the dogs and people in their care., • Ensuring customer satisfaction is consistently obtained., • Helping to support the efficient and effective operation of the facility., • Helping to maintain the highest company standards in the delivery of all services., • Is responsible for other administrative or various duties related to the position as assigned by management., • Is responsible for reading and knowing all Company Policies and Procedures. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. Education and/or Experience: Candidates with pet dog training certifications & education including CPDT, KPA, or other accredited programs & certificates preferred. Previous experience working with dogs and people in a professional setting is preferred. Training sessions and seminars may be scheduled during non-working hours where your attendance may be required. Physical Skills: Ability to perform a variety of demanding physical activities, including lifting a minimum of 50 pounds (whether it is a bag of dog food, a crate, or a dog), standing for long periods, and enduring extreme outdoor temperatures. Grasping, pinching, and pulling skills are also needed to leash and collar dogs and to navigate them through spaces. Health: It is required that all employees are current on their Tetanus vaccination. Language Skills. Ability to read dog information including names, medication, and feeding instructions, schedules, etc. Be able to communicate dog issues with management either via written or oral communication. Computer Skills: A basic understanding of Windows-based applications is helpful. Reasoning Ability: An ability to define problems, analyze emergencies, and think on your feet. Many dogs enrolled in training classes may present behavioral challenges that need to be worked through using only reward-based methods. It is the employees job to critically think through these challenges to keep dogs and people safe during individual and group training classes. Reading a dogs body language and behavior and catching key indicators of possible conflict is a must to ensure the safety and well-being of both dogs and people Compensation: • 40% of all group training fees for classes led by trainer. Group Classes will be held on weekday nights from 7-830pm. Training Tutor PLUS (1:1 training with Dog and parents for an hour) may be conducted after daycare is completed with slots at 430pm and 530pm., • 100% of tips of group training classes Central Bark Henrietta, NY | Doggy Day Care (centralbarkusa.com)

Job Description SUMMARY: The Store Team Leader will work with the store management teams within the assigned district to meet or exceed all store goals and ensure that Goodwill standards are followed in the execution and operation of their stores. The Store Team Leader is responsible for the overall day-to-day operation of the Goodwill retail store assuring that safety, sales, production, programs and services, and other standards are maintained. This position will also partner with other members of the Retail Administration & Logistics teams, People Resources and Workforce Development to ensure that all activities performed are in a manner consistent with the mission, vision, and values of Goodwill of the Finger Lakes. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Achieves budgeted revenue goal;, • Achieves revenue to expense ratio target;, • Delivers budgeted surplus target;, • Adheres to percent labor to sales metric; and, • Ensures compliance with Organization Safety standards., • Ensures that all store team members are trained and up-to-date in required Goodwill operating policies, required in-store safety programs and on-the-job training experiences;, • Demonstrates the highest level of customer service in all activities;, • Reviews customer concerns and resolves them appropriately within established guidelines, • Submits required information on production, distribution of labor, safety, and any team member related paperwork as required and within stated timeframes;, • Liaise with People Resources Generalist on employee relations issues for Store to ensure fair employee practices that are aligned with Goodwill of the Finger Lakes’ mission, vision and values., • Assures that loss prevention programs are adhered to, implemented in-store and are within Goodwill’s established standards., • Manages a broad range of store activities:, • Ensures that established standards, plans, plan-o-grams, and advertising/signage are implemented and maintained;, • Ensures polite and courteous acceptance of donations., • Coordinates with Director of DGR Operations for final decisions on donations., • Ensures complete processing of donations, both hard goods and clothing., • Monitors the stock level of store merchandise and works with Assistant Store Team Leaders to adjusts as necessary:, • Reviews applications, interviews, selects and completes new hire process for team members., • Prepares employee schedules and ensures adequate staffing is maintained for the store and stays within the boundaries of payroll budget through the store metrics; and, • Conducts team members performance reviews with input from other members of retail management, and Director of DGR Operations for retail management., • Trains and develops retail management teams for growth and more responsibility., • Ensures safe work practices are followed at all times:, • Ensures the facility is neat, clean and organized to prevent injury or accident., • Ensures employees, volunteers, community service personnel and others use safe work methods at all times., • Provides safety training to all new employees and administers on-going training to all store personnel., • Adheres to organizational values, ensuring that they are practiced daily in all store operations and interactions., • Ensures effective communication with store team, program participants, community and customers., • Acts as a positive role model for employees, trainees, and customers in all aspects of professional performance;, • Cooperates with Workforce Development and People Resources departments to maximize the benefits of those services to retail employees., • Ensures that store equipment is kept in proper working order. Promptly notify Maintenance of defects, or IT of problems with computer systems and e-mail., • Contributes to the overall effectiveness of Goodwill of the Finger Lakes and the Retail Store by completing all other tasks as assigned. SUPERVISORY RESPONSIBILITIES: Manages members of the store management team, who supervise processes and procedures and team members in assigned operations. Is responsible for the overall direction, coordination and evaluation of this store. Also manages non‑supervisory employees. Carries out supervisory responsibilities in accordance with the organization's policies and applicable laws. Responsibilities include interviewing, hiring and training employees; planning, assigning and directing work; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems. QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to demonstrate proficiency in meeting competencies required for position; able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed below are representative of the knowledge, skill and/or ability required. EDUCATION AND/OR EXPERIENCE: Bachelor’s Degree or equivalent required. A minimum of five years' progressive business experience required, retail experience preferred. Three to five years supervisory experience. Or equivalent combination of education and experience. LANGUAGE SKILLS: Able to read, analyze and interpret general business periodicals, professional journals, technical procedures or governmental regulations. Writes business correspondence. Presents information and responds to questions from groups of managers, clients, customers and the general public. Employee must be an effective communicator. MATHEMATICAL AND COMPUTER SKILLS: • Ability to calculate figures such as discounts, percentages, interest and sales volumes., • Must be proficient in Microsoft office programs such as Word, Excel and Outlook, • Able to apply financial and budgeting concepts. WORK ENVIRONMENT: While performing the duties of this job the employee is usually working in a comfortable and store environment. At times this employee may be exposed to the outside environment when receiving donations. The employee will also be exposed to the donation processing area which is a factory-like environment. The employee is occasionally exposed to dusts, molds and dirt while handling donated materials and to extreme cold in the Donation Center during the winter. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee must be able to travel for work-related programs and meetings. The employee is required to move stock, climb or balance on step‑ladders; stoop, kneel, crouch or crawl while setting up displays. The employee must frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Physical Demands- Store Team Leader Frequency Never Almost Never Occasionally Frequently Always Sitting X Standing X Walking X Bending over X Crawling X Reaching Overhead X Crouching X Kneeling X Balancing X Lifting and Carrying 10 lbs. or less X 11 to 25 lbs. X 26 to 50 lbs. X 51 to 75 lbs. X 76 to 100 lbs. X over 100 lbs. X Push/ Pull Max Force 0 to 20 lbs. X 21 to 39 lbs. X 40 to 59 lbs. X 60 to 100 lbs. X

Job Description RED-Rochester is a multi-utility generation plant and district energy supplier to one of the world’s most comprehensive industrial parks: the Eastman Business Park. Supporting a 1,200-acre campus, RED-Rochester has the utilities, infrastructure, technical services, support services, space and complementary regional resources to benefit a wide range of industry verticals. We are seeking a Pipefitter who enjoys the challenge of maintaining a dynamic infrastructure. Our infrastructure consists of a blend of classic and modern industrial assets and requires a person with broad industrial and utilities expertise – able to work collaboratively with others. This role is responsible for the installation, repair and maintenance of piping, piping components, valves & supports for Steam, Compressed Air, Hydraulic Water, or Oil Systems across all facilities and buildings located within Eastman Business Park owned and operated by RED Rochester, LLC. Essential Duties: ► Maintain Clear and Consistent Communication relating to the current status, performance and needs of your assigned location with RED-Rochester team supervisor, maintenance planner and operations staff. Ensure all RED-Rochester customer communicated concerns are immediately communicated and appropriately responded to. ► Assists Maintenance Planner to develop standard preventive maintenance routines to ensure maximum equipment uptime and lifespan is attained for all responsible systems. ► Assists Maintenance Planner to develop corrective (repair) maintenance job plans as needed to ensure all equipment repairs are completed in a timely basis to maintain all system redundancies for optimum emergency performance. ► Coordinates with Maintenance Planner, all shutdown planning (routine & emergency) for the execution of maintenance activities to include Customer end-user notifications. ► Complete all planned maintenance routines for assigned locations, documenting all actions within the RED-Rochester work order management system (MAXIMO®). ► Complete all assigned corrective maintenance actions, documenting all actions within the RED-Rochester work order management system (MAXIMO®). ► Assist with any Plant Overhaul, Upgrade or Modernization Activities being completed within assigned locations. ► Supervise any outside Contractor executing work within your assigned work location to ensure compliance with RED-Rochester safety policies and that the RED-Rochester standards for workmanship are maintained. ► Work, as needed within the larger team structure for team for major emergencies or catastrophic failures. ► Work consistently in a Safety mindset, following all prescribed and documented safety policies at RED-Rochester, LLC. ► Competencies and capabilities to respond and solve emergent events, trouble-calls, pipe ruptures, or pipe leaks: 24 hours a day – 7 days a week – 52 weeks out of the year. ► Work utilizing hoists, pulleys, dollies, rollers, trucks, overhead cranes and rigging, scaffolding, ladders & shop equipment. ► Potential to work with equipment such as boom lifts, scissor lifts, forklifts and power walkies. System / Job Competencies, but not limited to: ► High-pressure piping systems and equipment such as steam heating, steam generation, and hydraulic systems, steam generators, flash and expansion tanks, condensate, vacuum, circulating pumps, and radiators. ► Rigging & Safety signaling related to unloading or positioning of material for installation. ► Utilization all standard pipefitting tools, such as cutting, grinding, bending, joining, & threading equipment used to fit pipe per job. ► General knowledge of Boilers, Furnaces, Electrical Generators, Air Compressors, Refrigeration, Air Conditioning & Lubrication systems. Soft skills Competencies: ► Excellent and Clear Communication skills ► Demonstrated ability to work independently or within a team environment. ► Demonstrated ability to read and interpret blue prints ► Demonstrated ability to lay out the routing, placement, pitch, elevation, pressure reduction, expansion, and operation of various piping systems and equipment ► Demonstrated conceptual and practical trouble shooting skills ► Ability to follow procedures, work instructions and safety/environmental regulations ► General Knowledge and working understand of Computers utilizing generally understood business applications such as Microsoft Office ®, IBM Maximo ® or others. Education and/or Experience: ► High school diploma/GED ► Armed Forces training, Documented Fitter Apprenticeship Training or Equivalent field experience required. ► Applicable Associates or Bachelor’s degree preferred, but not required. Qualifications or Licenses: ► Enter and Register into an Apprentice Agreement (Form AT-10) with the NYS Department of Labor for the Pipefitter trade [DOT code: 862.281-022], within 60 days. ► Register and actively participate in a RED-Rochester Sponsored 5-Year Apprenticeship Training Program [Penn Foster College – Online or Comparable] within 60 days. For experienced candidates there may be an opportunity to test out of sections of the training path. ► Must obtain required safety operator licenses, as needed for fork truck, man lift and scissor lift within 12 months (Employer Provided) ► Immediately obtain OSHA 10hr certification. ► Must obtain OSHA 30hr certification within 12 months. ► Must have an unencumbered valid NYS drivers’ license Work Environment ► Industrial environment. ► Working outside in all weather conditions from street level to roof tops. ► Working inside in extreme conditions from Manholes, and building basements to rooftops. ► Possibility of temperatures ranging from extreme cold to over 100 degrees. ► Work will take place in chemical areas, noisy areas and areas that may be very dirty. Also will be operating heavy-duty machinery and vehicles including, Boomlifts (Manlifts), scissors lifts, fork trucks and power-walkie trucks. Physical Demands ► Position requires strenuous effort, climbing, stair climbing, and crawling to accomplish equipment isolation and movement of material ► Lifting and carrying of a variety of equipment weighing up to 50 lbs is sometimes necessary along with moving refrigeration cylinders and chemical drums weighing more than 50 lbs ► Potential to enter manholes underground (Confined spaces) and the Utilities tunnels ► Potential to work in overhead environments on Ladders, scaffolding, Boomlift or scissor lifts.

Job Description RED-Rochester is a multi-utility generation plant and district energy supplier to one of the world’s most comprehensive industrial parks: the Eastman Business Park. Supporting a 1,200-acre campus, RED-Rochester has the utilities, infrastructure, technical services, support services, space and complementary regional resources to benefit a wide range of industry verticals. We are seeking a Boiler/Refrigeration Operator who enjoys the challenge of solving problems that improve service to our customers. Our infrastructure consists of a blend of classic and modern industrial assets and requires a person with a mechanical and technical expertise – able to instruct and supervise others; able to manage both up and down the organization; able to work collaboratively with other departments to achieve success. Summary: This role is responsible for the operations and maintenance on RED’s industrial water, boilers, compressed air, and steam distribution systems within Eastman Business Park. This would include, but is not limited to starting and stopping equipment, making adjustments as needed to online units both manually and via the distributive controls system (DCS), and unloading chemicals used in water treatment and testing. This roles is required to follow and enforce company procedures to maintain a safe workplace and comply with regulatory requirements. Essential Duties and Responsibilities ► Perform routine boiler room, refrigeration and water treatment systems equipment inspections and performance including documentation of operational data, checking and adjusting of controls on equipment as necessary. ► Oversee the proper operation of the water treatment plant, boilers, turbines, and distribution systems with the shift operations teams, ensuring all teams adhere to the proper procedures & guidelines ► Assist with repairs as needed on all equipment and distribution systems piping. ► Conduct sampling and testing of chemical treatment systems including the unloading of bulk chemicals. ► Provide operating support for equipment shutdowns and startups including securing of equipment using standard LO/TO procedures. ► Assist with maintaining equipment in a clean and operable condition. ► Assist with the development and updates of standard operating procedures. ► Maintenance duties as needed including refrigerant handling, leak repair, pump packing adjustments, etc. ► Provide operating support for overhead distribution piping systems. ► Other duties as assigned such administrative, proper record keeping, inspections, etc. ► Must adhere to all safety protocols and regulations. This role is performed on a rotating shift assignment schedule. The rotation consists of two (2) days (6:00am – 6:00pm) then two nights (6:00pm to 6:00am) followed by four (4) days off. This is a non-exempt hourly position with overtime. The annual salary considering shift work, rotating schedule and overtime is estimated at $72,000 - $84,000 plus an annual Incentive Bonus target of 7%. The above-listed salary range is RED-Rochester, LLC’s good faith estimate of the annual salary it reasonably expects to pay for the position at the time of this posting. Qualifications, Education and/or Experience desired: ► High school diploma/GED, 2 years of experience at lower-level operator/mechanic position, knowledge of refrigeration systems, cooling towers, water treatment plant, piping systems, building structures and steam turbines helpful. ► Proficient in MS Office ► Ability to learn various industrial software applications (Maximo, Compliant Pro, Tags Pro, Ovation, and Pi software). ► Ability to work with all levels of the organization. ► Need strong communication skills. ► Ability to learn DCS (distributive control systems), Ovation control systems for shift operations within a short period after hire. ► Must have a valid NYSDOT drivers’ license and proof of insurance. RED-Rochester will assist selected employees with obtaining the following licenses/certifications required for this position: ► City of Rochester S-3 Stationary Engineers License within 14 months after starting this position. ► City of Rochester R-4 Refrigeration Operators License within 18 months after starting this position. ► NYSDOH 2a Water Treatment Operator certification within 16 months after starting this position. ► US-EPA Refrigerant Handling Universal License within 12 months after starting this position. Work Environment ► Work may be under extreme weather conditions including hot and cold ambient temperatures. ► Incumbent will be required to travel between various buildings and work in plant environment where there is moderate noise levels. Employee would be expected to wear appropriate safety gear for each location. Physical Demands ► While performing duties of job, incumbent is occasionally required to bend, walk, or carry equipment. Employee must occasionally lift and move up to 50 pounds. This position requires a rotating shift schedule. ► Must have a valid driver’s license and willingness to use a company or personal car to travel about Eastman Business Park which covers approximately 5 square miles. RED-Rochester, a great place to work, a great place to advance. At RED-Rochester we offer: • On the job Training with Training Pay Incentives, • Tuition Reimbursement, • Medical, Dental and Vision, • Life and AD&D Insurance, • Short Term and Long-Term Disability, • Voluntary Accident Insurance, • Critical Illness Insurance, • Identity Theft Protection, • Employee Assistance Program (EAP), • 401(k) Employer Match, • Paid Time Off —Vacation, Sick, Holiday, • Gym Membership Programs, • Bonus Plan

Job DescriptionDescription: Supervisory Responsibilities: None Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. · Follows all safety process and procedures in accordance with the job and Company policy. · Interprets machine operation manuals and identifies problem source. · Disassembles and removes, repairs and/or replaces defective components on manufacturing equipment. · Specifies and quotes replacement items for manufacturing equipment and facilities. · Performs preventative maintenance, including lubricating and cleaning of manufacturing equipment. · Performs simple repairs on building and grounds (windows, fences, doors, etc.) and plumbing. · Construct simple facility improvement projects (door frames, shelving, partitions, etc.). · Visually inspects and tests machinery and equipment. · Listens for unusual sounds from machines or equipment to detect malfunction and discusses machine operation variations with supervisors or other maintenance workers to diagnose problem. or repair machine. · Cleans and lubricates shafts, bearings, gears, and other parts of machinery. · Installs and repairs electrical apparatus, such as transformers and wiring, and electrical and electronic components of machinery and equipment. · Lays out, assembles, installs, and maintains pipe systems and related hydraulic and pneumatic. equipment, and repairs and replaces gauges, valves, pressure regulators, and related equipment. · Repairs and maintains the physical structure of the establishment. · Must possess own tools. · Installs, programs, or repairs automated machinery and equipment such as robots or programmable controllers and a firm grasp of Ladder Logic is required. · Be able to respond to call-backs in emergency break down situations on an as needed basis. · Other duties as assigned. Requirements: Education High school diploma or general education degree (GED), or equivalent combination of education and experience. Experience 3-5 years related experience or training. Other Requirements Ability to read blueprints, interpret operation manuals; understanding of manufacturing equipment and facilities; ability to use hand and power tools and mechanical testing equipment; welding, machining and plumbing experience helpful. Computer Skills: Keyboarding Language Skills: Intermediate Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. Mathematical Skills: Intermediate Skills: Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry. Reasoning Ability: Intermediate Skills: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the employee is regularly required to stand; walk; sit; maneuver through the office and factory; use hands to finger, handle, or feel; reach with hands and arms; grasp and twist, climb or balance; stoop, kneel, crouch, or crawl; talk or hear; lift and/or move equipment/product weighing up to 50 pounds. Work with another associate to lift anything greater than 50lbs. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. While performing the duties of this job the employee is regularly exposed to humid conditions; moving mechanical parts; high, precarious places, extreme heat; extreme cold; risk of electrical shock; toxic or caustic chemicals and outside weather conditions. The noise level in the work environment is usually loud.

Job DescriptionJob Overview: We are seeking a highly motivated and skilled Maintenance Mechanic who performs mechanical repairs on all production and non-production equipment. Key Responsibilities: • Follows all safety process and procedures in accordance with the job and Company policy., • Interprets machine operation manuals and identifies problem source., • Disassembles and removes, repairs and/or replaces defective components on manufacturing equipment., • Specifies and quotes replacement items for manufacturing equipment and facilities., • Performs preventative maintenance, including lubricating and cleaning of manufacturing equipment., • Performs simple repairs on building and grounds (windows, fences, doors, etc.) and plumbing., • Construct simple facility improvement projects (door frames, shelving, partitions, etc.)., • Visually inspects and tests machinery and equipment., • Listens for unusual sounds from machines or equipment to detect malfunction and discusses machine operation variations with supervisors or other maintenance workers to diagnose problem or repair machine., • Cleans and lubricates shafts, bearings, gears, and other parts of machinery., • Installs and repairs electrical apparatus, such as transformers and wiring, and electrical and electronic components of machinery and equipment., • Lays out, assembles, installs, and maintains pipe systems and related hydraulic and pneumatic. equipment, and repairs and replaces gauges, valves, pressure regulators, and related equipment., • Repairs and maintains the physical structure of the establishment., • Must possess own tools., • Installs, programs, or repairs automated machinery and equipment such as robots or programmable controllers and a firm grasp of Ladder Logic is required., • Be able to respond to call-backs in emergency break down situations on an as needed basis., • Intermediate Skills: Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry., • The noise level in the work environment is usually loud., • This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities, and activities may change at any time with or without notice.Hours:, • Full Time - 40 hours per week, • Monday - FridayBenefits:, • Competitive salary and benefits package., • Opportunity to work in a dynamic and innovative environment., • Professional growth and development opportunities., • Collaborative and supportive work culture.Contact Us:

Job Description RED-Rochester is a multi-utility generation plant and district energy supplier to one of the world’s most comprehensive industrial parks: the Eastman Business Park. Supporting a 1,200-acre campus, RED-Rochester has the utilities, infrastructure, technical services, support services, space and complementary regional resources to benefit a wide range of industry verticals. We are seeking a Utility Measurement Technician who enjoys the challenge of supporting utility services through inspecting, calibrating, installing and maintaining measurement equipment for a utility provider. Our infrastructure consists of a blend of classic and modern industrial assets and requires a person with broad industrial and utilities expertise – able to instruct and advise others; able to manage both up and down the organization; and able to work collaboratively with other departments to achieve success. Responsible for the installation, maintenance, calibration, and repair of various measurement equipment to accurately meter steam, water, thermal systems, and gases. Working directly with a wide variety of meters such as differential pressure, vortex, ultrasonic, positive displacement, and other types. Duties include interacting with customers on occasion to resolve measurement issues. Essential Duties and Responsibilities  Maintains and troubleshoots measurement equipment.  Performs calibrations on meters including blowing down and calibrating orifice plates.  Assists with new meter installations.  Performs and documents routine maintenance and checks of meters.  Inspects and calibrates instruments and test equipment periodically and adjusts calibration to ensure functioning within specified or established standards.  Install, repair, and replace insulation jackets and/or heat trace (both electric and steam) for impulse lines.  Interacts with engineering, project management, operations, customers, and other technical groups as required to resolve issues.  Assist other technical groups as needed.  The ability to effectively communicate, both verbally and in writing, with other individuals, teams, customers, and stakeholders of the business, at various levels of the organization, in a business-like and professional manner is required. Education and/or Experience: • High School Degree/GED (Required), • Relevant vocational school degree or certification (Preferred), • Experience working in a plant or utility environment (Required), • Experience working with steam systems (Preferred), • Experience working with pressure, flow, and/or temperature measurement (Required), • Utility metering experience (Preferred) Qualifications  Must have valid drivers’ license and proof of insurance  Must be able to operate a lift (working up to 40’ overhead) and ladders. (Lift training will be provided).  Ability to work in a variety of physical environments at varying temperatures (hot and cold).  Capable of lifting/carrying/pushing/pulling up to 50 lbs  Capable of vigorous outdoor activities and have manual dexterity with physical ability to work extended hours, climbing, bending, kneeling, squatting, working with arms extended above the head, twisting upper body, standing for long periods, walking on catwalks, working in confined spaces, exposure to extreme weather conditions, driving a vehicle, operation of forklifts and light industrial equipment Competencies: • Knowledge of utility measurement principles and meter technologies., • Knowledge and demonstrated practice of industrial safety/OSHA rules/regulations, including Lockout/Tagout, Confined Space Entry, Fall Protection, Electrical Safety, and others., • Familiarity with Microsoft Windows and Microsoft Office software., • Good communication skills in English., • Excellent problem solving and demonstrated trouble shooting skills., • Strong mechanical and electrical aptitude., • Ability to follow procedures, work instructions and environmental rules and regulations., • Ability to recognize opportunities for process improvements and assist in implementation., • Ability to work both independently and in a team environment., • Ability to consult manuals, read and interpret circuit diagrams, electrical schematics, and other drawings.

Job DescriptionJob Title: Production AssociateJob Description The role involves inspecting fresh or processed products on conveyor systems or roller tracks, placing products on processing and packaging conveyor systems, and lifting or moving trays off and onto carts. You will also be responsible for tray loading products onto trays, assisting in moving racks or carts of products, packing packaged products into cardboard boxes, labeling and sealing product cases or cartons, and cleaning and setting up processing and packaging operations. Responsibilities • Inspect fresh or processed products on conveyor systems or roller tracks., • Place products on processing and packaging conveyor systems., • Lift and move trays off and onto carts., • Load products onto trays., • Assist in moving racks or carts of products., • Pack packaged products into cardboard boxes., • Label and seal product cases and cartons., • Clean and set up processing and packaging operations.Essential Skills, • Experience in production, general labor, and machine operation., • Ability to operate processing machinery, including setup and teardown., • Proficiency in product processing room cleaning and sanitizing., • Ensure process and product quality is maintained., • Effective communication with team members, other shifts, supervisors, and maintenance.Additional Skills & Qualifications, • Ability to work in a team environment., • Strong organizational skills. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Rochester,NY. Application Deadline This position is anticipated to close on Dec 19, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Location: Monroe County Overview: The Delivery Driver's primary responsibility will be to ensure the safe, efficient and timely delivery of packages to retail stores. Essential Duties and Responsibilities: • Perform daily pre-trip safety inspections on all equipment., • Verify and complete required documentation and reports., • Follow dispatch instructions and communicate with dispatch as required, including but not limited to: delays, arrivals and equipment problems., • Communicate with customers to determine pick-up or delivery needs., • Demonstrate superior internal and external customer service., • Know how to use GPS., • Must be action orientated with excellent listening skills., • Must possess excellent time management skills, exhibit patience with a strong customer focus at all times and in a professional manner., • Required to operate delivery truck and comply with all safety regulations and all applicable laws., • Ability to work independently and/or as a team member., • Able to meet deadlines., • Must maintain satisfactory attendance with dependability and consistency., • Good verbal and written communication skills., • Ability to prioritize, manage and perform multiple tasks simultaneously., • Computer knowledge including Microsoft Office., • Ability to meet and/or exceed the established customer service objectives., • Position requires the ability to sit and drive for up to 6 hours; lifting and carrying, • Packages up to 50 pounds; utilizing fine dexterity; and reaching, kneeling, crawling, and twisting. Also requires the ability to see; hear; and communicate by utilizing professional etiquette with all levels of associates and with external vendors., • Check the delivery schedule and make sure you are familiar with the route., • Understand all necessary paperwork, including the delivery manifest & invoice, customer contact information, and any special instructions., • Prepare the delivery vehicle, making sure it is clean and well-stocked with supplies., • Be on time for the delivery., • Be professional and courteous to the customer., • Carefully inspect the product to make sure it is in good condition. Post-Delivery • Complete any necessary paperwork, such as a delivery report., • Upload the paperwork in the appropriate location., • High School Diploma or G.E.D minimum., • Must be a minimum of 25 years of age., • Requires a minimum of 1 year of delivery driving experience (van or similar) within the past three years., • Must possess and maintain a clean driving record and valid NYS License., • Thorough knowledge of traffic laws and defensive driving., • Must be an effective communicator with excellent attention to detail., • Ability to wear PPE (personal protective equipment) such as hair net, earplugs, beard net (if applicable), protective gloves, safety harness, safety glasses and slip resistant work shoes/boots. Personal protective equipment, as defined by Cirona Labs, will be provided., • Ability to work effectively in a fast paced, team environment., • Ability to read, interpret, and understand basic math percentages and formulas., • Work may involve daily exposure to unusual elements, such as dirt, dust, fumes, extreme temperatures (hot and cold), humidity, darkness, and noise., • Will demonstrate, promote, and exemplify the Company's Core Values in People, Quality and Growth., • Works in other areas of the facility, performing tasks outside of the scope of the primary job functions as needed., • Be aware of your surroundings and drive safely at all times., • Must dress professionally and make a good impression on the customer., • Must be proactive and offer to help the customer with anything they need., • Must be positive, enthusiastic and knowledgeable about the products you are delivering., • Be friendly, approachable, flexible and willing to go the extra mile., • Be persistent., • Must have reliable transportation., • Must comply with all company policies and procedures., • Must complete all required training. The company is an Equal Opportunity Employer and complies with ADA regulations as applicable. Benefits: • Paid sick time Work Days: • Monday to Friday, • Weekends as needed, • High school or equivalent (Required) License/Certification: • NYS Drivers License (Required)

Job Description St. John’s is leading and inspiring a shift in society’s views of elderhood. Join our family of dedicated, talented employees who are at the forefront of innovative senior services delivery in this community. St. John’s embraces living every day by fostering a culture that is friendly, respectful, responsive, compassionate, innovative, and fun for both employees and the elders and residents that call St. John’s home. If this description speaks to you, continue reading about the opportunity of a full time Driver at the St. John's Meadows. Available Shifts: Monday-Friday 8:00 am-4:30 pm, 8:30 am-5:00 pm, and 9:00 am-5:30 pm Occasional nights and weekends may be required for special events. Position Summary: The Driver is responsible for providing excellent customer service to all residents, their guests, volunteers, St. John’s employees, to and from their appointments and/or events, safely, courteously and reliably. Responsibilities include: • Perform daily vehicle safety inspections, • Maintain clean vehicles., • Transport passengers for appointments, safely, courteously and reliably., • Assist passengers in and out of vehicles as needed., • Relay any information that assists dispatch with daily schedules., • Record times and mileages for all trips on a daily basis., • Attend scheduled staff meetings., • Some weekend and evening work may be required, may need to work other hours than normally assigned or after normal end shift, and/or may be assigned to another shift as needed., • Arrive on time, prepared to work., • Perform daily vehicle safety inspections., • Provide outstanding customer service to all residents, guests, volunteers, employees., • Knowledge of vehicle maintenance and possess ability to navigate within the Greater Rochester area., • GED or High School Graduate, • Must be at least 21 years of age, • Must meet DOT standards regarding drug abuse and alcohol misuse, • Maintain a valid New York State Commercial Driver’s License (CDL- A or B) with Passenger endorsement and current DOT Card., • Wheelchair bus experience Physical Requirements: • Visual and auditory acuity, walking, climbing stairs, pushing wheelchairs, lifting (up to 50 lbs.) and bending to secure wheelchairs., • Exposure to Conditions:, • Driving outdoors in extreme weather Exposure to Conditions: • Driving outdoors in extreme weather Check out what we have to offer YOU at : • Health, dental, vision insurance (30 hours+), • Employer sponsored life insurance & telemedicine (30 hours+), • Weekly paychecks, • Competitive pay, • Free parking, • 24/7 fitness center, • Generous paid time off and holidays, • On-site child care, • Employee Assistance Plan, • Cell phone discounts

Job Description Department: Food & Beverage Reports To: DRP Restaurant Manager, DRP Assistant Restaurant Manager, DRP Restaurant Supervisor Supervises: N/A Job Summary (Essential Functions): The Donald Ross Pub Host/Hostess is responsible for providing our members and guests with friendly, professional and expedient service to help create memorable dining experiences. Job Knowledge, Core Competencies, and Expectations: • Oak Hill Country Club's Acorns of Excellence., • Neatly groomed and dressed in accordance with Oak Hill Country Club's appearance standards., • Exceptional communication abilities when interacting with associates, guests, clients and internal departments to build relationships., • Works harmoniously and professionally with co-workers., • Must be able to work well under pressure in a high-volume setting where multitasking is required., • Must be able to work a flexible shift that includes early mornings, nights, weekends, holidays, split shifts, and extended shifts if needed. Expected to work 40-60 hours per week throughout the year and additional hours during event weeks., • Exceptional knowledge of Oak Hill's food and beverage standards and host operating procedures., • Exceptional communication abilities to direct the flow of the dining room with the supervision of management., • Prepares and prints a floor plan with the direction of Donald Ross Pub management. Ensures tables are assigned according to the floorplan and match up with the reservation sheet., • Reviews all reservations in the point of sales system (Jonas) prior to each meal period. Makes note of special occasions and/or dietary requirements of members and guests dining at the Club. Relays information to servers accordingly., • Ensures all menus are accurate and clean prior to service., • Greets each member and guest during service and ascertains the name, party size and any special requirements., • Controls the flow of seating to ensure top level service and the success of the service team., • Maintains a neat and orderly work environment., • Assists servers, server assistants, food runners and bar staff as needed throughout service., • Assists members and guests with questions and directions., • Accepts reservation requests in accordance with Oak Hill policies., • Carries out bylaws and policies set by the Board of Directors., • High school or equivalent education required. Licenses and Special Requirements • Valid driver's license., • Food safety certification., • Alcoholic beverage certification. Physical Demands and Work Environment • Regularly exposed to moving mechanical parts and outside weather conditions., • Occasionally exposed to wet and/or humid conditions; high, precarious places; extreme cold; extreme heat. The noise level in the work environment is usually moderate to loud., • Able to meet and perform the physical requirements of the job and to work effectively in an environment that is typical of this position., • Frequent lifting, bending, climbing, stooping, and pulling., • Must be able to lift 75 pounds., • Must be 18 years of age., • Must be able to follow written and verbal instructions., • Must have a reliable form of transportation to and from work. General Information Scheduled Shifts: Year-round position. Days and hours are based on club operations and weather conditions. Wage: Competitive wage, based on experience

Job Description The Louis S. Wolk Jewish Community Center of Greater Rochester is located alongside the Erie Canal in Brighton. It is a 200,000 square foot facility that houses our state-of-the-art fitness, wellness, and recreation programming, an aquatics center, a Professional Theatre, a Children’s Center, and our camping programs. We pride ourselves on providing our members with high-quality educational, cultural, and social programming, and we are an inclusive community center that welcomes people of all faiths, backgrounds, and ages. We are looking for a Full-Time & Part-Time Housekeeper to join our team who is responsible for ensuring the facility is clean and sanitized for all our members, guests, and staff. • Evening shift Weekdays: 5:30 PM - 2:00 AM To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable an individual with disabilities to perform the essential job functions. • Clean locker rooms, shower stalls, and washrooms daily., • Sweep, vacuum, mop, scrub, wax, and polish floors using industrial vacuum cleaners and scrubbing and buffing machines., • Operate various mechanized cleaning equipment, such as vacuums, polishers, and buffers., • Wash windows on a regular schedule., • Completely strip and recoat all floor areas when necessary and as scheduled., • Use ladders, dust, and wash walls, clean shower areas, bathrooms, sink areas, common areas, office, and all areas of classrooms, clean ceiling fans and vents, dust all areas, furniture, light fixtures, and windowsills., • Move furniture and equipment to clean areas. May remove stains from such surfaces as rugs, walls, and floors using chemicals and cleaning solutions., • Empty trash containers daily and are responsible for the disposal of trash., • Must handle various cleaning solvents, chemicals, etc., • Plan work schedule for major tasks., • May sweep walks and remove snow or perform other incidental seasonal tasks., • Report any needed repairs immediately to the supervisor., • Communicate effectively with staff and members of the Facility., • May perform other duties as requested by management. The physical demands described here are representative of those that an employee must meet to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to: • Extensive work while standing, extensive walking, reaching with hands and arms, grasping and twisting, climbing, and balance, • Frequent stooping, kneeling, crouching, or crawling, • Bending and moving continually during working hours, • Lift and/or move up to 50 pounds, • Lift and/or move over 50 pounds with assistance The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. • Moving mechanical parts, extreme heat, extreme cold, • Risk of electrical shock, fumes, cleaning chemicals, and outside weather conditions., • While performing the duties of this job, the employee is regularly exposed to inclement weather conditions, i.e., shovel snow, salt, wash windows, pick up trash, and empty garbage., • Health, Dental, and Vision, • Retirement Plan, Life and Disability Insurance, • Employee Assistance Program, • Free membership to our Fitness and Aquatics Center

Job DescriptionBenefits: • 401(k), • Dental insurance Start your HVAC career with a company that invests in you! Were looking for a motivated, dependable, and hands-on individual to join our New Home Construction HVAC Installer Trainee. As an Installation Trainee, youll learn the ins and outs of HVAC installation, working alongside experienced technicians to deliver high-quality comfort systems for residential customers. If youre reliable, eager to learn, and ready to build a lasting career, we want to hear from you! What Youll Do: Work as part of the New Home Construction HVAC Installation Trainee Team to complete HVAC installations efficiently and safely. Assist with basic installation tasks such as: • Fabricating and installing sheet metal ducts and transitions, • Installing registers and grilles, • Installing and brazing refrigeration line sets, • Assisting Installation and Senior Technicians on the jobProgressively take on more advanced tasks, including:, • Measuring and threading piping, • Using test equipment, • Assisting with system start-up, testing, and balancing, • Installing residential HVAC systems (furnaces, air conditioners, heat pumps, etc.), • High school diploma or equivalent, • Construction background or mechanical experience a plus, • Strong communication and reading skills able to follow written instructions and talk comfortably with customers and coworkersPhysically able to handle job demands, including:, • Lifting up to 100 lbs. and carrying loads up to 50 feet, • Working on ladders up to 32 feet, • Performing outdoor work in all weather conditions (extreme temperatures), • Comfortable working at heights, • Willingness to learn and grow through training and professional development, • Valid NYS drivers license (must be insurable under company policy), • Dependable and able to work efficiently under changing schedules or time pressuresWhy join TRS Heating & Air Conditioning:, • Paid Training well teach you everything you need to know, • Career Growth clear paths to advance your skills and position, • Flexible Scheduling, • Competitive Pay, • Year-Round Work, • Health Insurance, • Company-Paid Dental & Vision Insurance, • 401(k) Plan

Job Description Position:Metal Finisher Reports to: Plant Manager Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning QS:9000, ISO:9002, and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol free working environment. General Job Description: Grinds and smooths surfaces of items, while also possessing the ability to read and comprehend simple instructions, short correspondence and memos. Ability to write simple correspondence. Minimum Qualifications: • High school diploma or general education degree (GED), • Minimum one year or more experience, • Fluent in verbal and written English Specific Duties: • Examines and feels surface of work piece for defects., • Move grinder over surface of work piece to remove scratches and imperfections, • Polish ground areas with finer abrasive to produce smooth, unmarred surface, • Replace worn abrasive disks, wheels, and belts, • Selects grade of abrasive belt, wheel, or disk according to specifications, • Ability to operate material handling equipment Physical Demands: • Must be able to lift up to 50 lbs regularly, • Requires frequent bending, stooping, squatting, pushing and pulling of parts and part containers, • May be required to stand for long periods of time, • May involve some repetitive motions, • Due to the open environment of the warehouse, must be able to work in various weather and temperature conditions to include extreme heat, humidity and cold This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties and responsibilities as it may be deemed necessary.

Job Description Department: Food & Beverage Reports To: DRP Restaurant Manager, DRP Assistant Restaurant Manager, and/or DRP Restaurant Supervisor Supervises: N/A Job Summary (Essential Functions): Ensures prompt and polite service to our members and guests. Serves as the liaison between the kitchen and servers. Facilitates the transportation of food items from the kitchen to the dining room floor. Job Knowledge, Core Competencies, and Expectations: • Oak Hill Country Club's Acorns of Excellence., • Neatly groomed and dressed in accordance with Oak Hill Country Club's appearance standards., • Exceptional communication abilities when interacting with associates, guests, clients and internal departments to build relationships., • Must be able to work well under pressure in a high-volume setting where multitasking is required., • Works harmoniously and professionally with co-workers., • Must be able to work a flexible shift that includes early mornings, nights, weekends, holidays, split shifts, and extended shifts if needed. Expected to work 40-60 hours per week throughout the year and additional hours during event weeks., • Ensures all service stations in the kitchen are stocked and ready for service., • Maintains cleanliness of service stations in kitchen while ensuring that the kitchen is free from clutter and that the kitchen floor is a clean and safe work area., • Ensures that bread, soup and other food products are available., • Ensures that each food item has the appropriate side dishes and sauces., • Wipes up spills or drips on the rims of dishes and ensures the consistency of plate presentation., • Ensures plated hot food leaves the kitchen quickly., • Hand carries food to tables using the correct seat positions on the ticket and verbalizes the dish to the member while serving., • Ensures that all items in "to go" orders are correctly assembled and labels them by stapling the ticket to the bag., • Assists servers and server assistants throughout the course of service as needed., • Assists server assistants in the dining room with clearing soiled dishes, filling waters and setting the dining room., • Breaks down and cleans service stations in the kitchen at the end of the shift., • Reports complaints to manager on duty when received., • Ensures that the salad bar stays stocked, clean and in good working condition., • Responsible for storing equipment and materials properly and in the correct areas., • Ensures that all storerooms and equipment storage areas are orderly and clean., • Inspects equipment for defects, cleanliness or any maintenance that needs to be completed and reports to supervisor., • Ability to develop and maintain awareness of occupational hazards and safety precautions; skilled in following safety practices and recognizing hazards., • Carries out bylaws and policies set by the Board of Directors., • High school or equivalent education required. Licenses and Special Requirements • Valid driver's license., • Food safety certification., • Alcoholic beverage certification. Physical Demands and Work Environment • Regularly exposed to moving mechanical parts and outside weather conditions., • Occasionally exposed to wet and/or humid conditions; high, precarious places; extreme cold; extreme heat. The noise level in the work environment is usually moderate to loud., • Able to meet and perform the physical requirements of the job and to work effectively in an environment that is typical of this position., • Frequent lifting, bending, climbing, stooping, and pulling., • Must be able to lift 75 pounds., • Must be 18 years of age., • Must be able to follow written and verbal instructions., • Must have a reliable form of transportation to and from work. General Information Scheduled Shifts: Full-time/Part-time, year-round position. Days and hours are based on club operations and weather conditions. Wage: Competitive wage, based on experience

Job Description RED-Rochester is a multi-utility generation plant and district energy supplier to one of the world’s most comprehensive industrial parks: the Eastman Business Park. Supporting a 1,200-acre campus, RED-Rochester has the utilities, infrastructure, technical services, support services, space and complementary regional resources to benefit a wide range of industry verticals. We are seeking a High Voltage Electrician who enjoys working in with a team of professionals supporting power generation and distribution. Our infrastructure consists of a blend of classic and modern industrial assets and requires a person with broad industrial and utilities expertise – able to instruct and advise others; able to manage both up and down the organization; and able to work collaboratively with other departments to achieve success. In this role you will maintain the high voltage electrical distribution system (with system voltages at 480-34.5KV) to ensure uninterrupted power supply to all facilities and buildings across Eastman Business Park, and install, troubleshoot, repair, and maintain components associated with the system. Essential Duties: ► Maintain Clear and Consistent Communication relating to the current status, performance and needs of your assigned location with RED-Rochester team supervisor, maintenance planner and operations staff. Ensure all RED-Rochester customer-communicated concerns are immediately communicated and appropriately responded to. ► Assists Maintenance Planner to develop standard preventive maintenance routines to ensure maximum equipment uptime and lifespan is attained for all responsible systems. ► Assists Maintenance Planner to develop corrective (repair) maintenance job plans as needed to ensure all equipment repairs are completed in a timely basis to maintain all system redundancies for optimum emergency performance. ► Coordinates with Maintenance Planner, all shutdown planning (routine & emergency) for the execution of maintenance activities to include Customer end-user notifications. ► Complete all planned maintenance routines for assigned locations, documenting all actions within the RED-Rochester work order management system (MAXIMO®). ► Complete all assigned corrective maintenance actions, documenting all actions within the RED-Rochester work order management system (MAXIMO®). ► Assist with any Plant Overhaul, Upgrade or Modernization Activities being completed within assigned locations. ► Supervise any outside Contractor executing work within your assigned work location to ensure compliance with RED-Rochester safety policies and that the RED-Rochester standards for workmanship are maintained. ► Ability to perform tests including but not limited to transformer insulation resistance, transformer turns ration, high-current injection, fuse continuity, protective relay testing, cable testing, etc. ► Work, as needed within the larger team structure for Red-Rochester major emergencies or catastrophic failures. ► Demonstrated ability to perform the following equipment testing, but not limited to: Transformer Insulation Resistance, Transformer Turns Ration, High-Current Injection, Fuse Continuity, Protective Relay Testing, Cable Testing, and Generator Performance Testing. Equipment Competencies, but not limited to: ► 13,800Kv Electrical Generation systems, Buses, Bus Ties, Load-centers, other metal clad Switchgear systems ► 2400vAC electrical systems, Transformers, Motors, Motor Starters, other Switchgear systems ► Circuit Breakers, Protective Relay systems, Automatic Transfer Switches: Clean, Inspect, Repair & Test all functional components. ► Voltage control & excitation, battery operated control voltage systems, battery charging systems. Soft skills Competencies: ► Excellent and Clear Communication skills ► Demonstrated ability to work independently or within a team environment. ► Demonstrated Electrical aptitude and abilities ► Demonstrated Mechanical aptitude and abilities ► Demonstrated conceptual and practical trouble shooting skills ► Ability to follow procedures, work instructions and safety/environmental regulations ► General Knowledge and working understand of Computers utilizing generally understood business applications such as Microsoft Office ®, IBM Maximo ® or others. Education and/or Experience: ► High school diploma/GED ► Armed Forces training, Documented Electrical Apprenticeship Training or Equivalent field experience required. ► Applicable Associates or Bachelor’s degree preferred, but not required. Qualifications or Licenses: ► Demonstrated Knowledge of the NFPA 70E Standard for Electrical Safety in the Work Place. ► Demonstrated Knowledge of the current National Electrical Code. ► Must obtain required safety operator licenses, as needed for fork truck, man lift and scissor lift within 12 months (Employer Provided) ► Immediately obtain OSHA 10hr certification. ► Must obtain OSHA 30hr certification within 12 months. ► Must have an unencumbered valid NYS drivers’ license Work Environment ► Industrial environment. ► Working outside in all weather conditions from street level to roof tops. ► Working inside in extreme conditions from Manholes, and building basements to rooftops. ► Possibility of temperatures ranging from extreme cold to over 100 degrees. ► Work will take place in chemical areas, noisy areas and areas that may be very dirty. Also will be operating heavy-duty machinery and vehicles including, Boomlifts (Manlifts), scissors lifts, fork trucks and power-walkie trucks. Physical Demands ► Position requires strenuous effort, climbing, stair climbing, and crawling to accomplish equipment isolation and movement of material ► Lifting and carrying of a variety of equipment weighing up to 50 lbs is sometimes necessary along with moving refrigeration cylinders and chemical drums weighing more than 50 lbs ► Potential to enter manholes underground (Confined spaces) and the Utilities tunnels