Extreme jobs in White Plains, New YorkCreate job alerts

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio! IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: Knowledge and ability to perform Preventative Maintenance services with general knowledge related to heavy duty and light duty trucks. This may include gasoline, diesel and CNG Systems. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Aid/assist drivers in completion of the daily Post trip and vehicle safety inspection process, • Conducts safety checks on vehicles and equipment during Safety Lane and PM's., • Complete lubrication and repair of lubrication points on vehicles as assigned on the daily schedule, • Ability to learn and utilize brake inspection procedures and complete documentation daily, • Perform basic repairs and maintenance on Heavy Duty Equipment, including but not limited to Rear Load, Front Load, Roll Off, Grapple, Port-a-let, and other service type trucks including chassis and body., • Communication with A & B technicians /drivers as to issues with vehicles and discusses preventative techniques that may minimize future repairs., • Completes all required paperwork / computer data entry, including documenting parts usage and time in and out on repair orders, in a timely and concise manner., • Maintains a clean, safe work area in compliance with corporate and OSHA standards which may include sweeping, organizing and maintaining the shop and grounds areas., • Conducts repairs utilizing Factory Service Manuals., • Maintain high standard of Ethics and Dependability., • Follows all safety policies and procedures. Requirements and Qualifications::, • Ability to assist drivers with Pre/Post trip process, • Ability to identify visible repairs required on vehicles: lights, mirrors, leaks, body damage etc., • Ability to assist/complete fluid top up on vehicles including oil, hydraulic fluids, transmission fluid, DEF fluid, • Knowledge of tire inspections and air pressure adjustments, • Ability to support technicians in repair of lights, wipers, mirrors., • Ability to understand and use lubrication charts for waste trucks, • Ability to lubricate components on trucks as scheduled (training provided), • Ability to assist technicians in the repair of basic engine, transmission, brake, suspension, electrical, hydraulic, body components and systems related to Heavy Duty and Light Duty Trucks., • Knowledge of all tools required to perform repairs and maintenance on vehicles., • Basic computer skills as required. OTHER JOB RESPONSIBILITIES: • Employees in this job classification must attend and participate in corporation sponsored training courses as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. • Employees in this job classification are responsible for keeping up to date on current technology, as job appropriate, • Any additional job duties that may be assigned by the Supervisor., • Exposure to chemical and residential waste., • Walking, Jogging, Twisting, Crouching, Lifting, • Sufficient stamina for steady work pace throughout the day, • Able to utilize all Personal Protective Equipment as mandated by company, • Physically able to get up and down from the cab of a commercial motor vehicle between 50 and 100 times a day, • Physically able to lift 50 to 75 pounds from the floor to waist height unassisted, • Physically able to lift 50 pounds from the floor to shoulder height unassisted, • Physically able to lift 50 pounds form the floor to overhead unassisted, • Physically able to push and pull 50 pounds unassisted, • Physically able to frequently (100-200 times) bend at the knees and waist, • Physically able to frequently (100-200 times) reach over your head or reach out with extended arms to perform work, • Physically able to frequently (100-200 times) twist at the waist to perform work, • Physically able to work in extreme temperatures and weather environments (road calls). WORK ENVIRONMENT: • Normal setting for this job is: Inside and Outside with occasional exposure to extreme weather conditions. Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $27.00/Hr. Salary Range Maximum: USD $37.00/Hr.

Persons employed as a GSE Mechanic is expected to: • Inspect and maintain ground support equipment used in operations., • Troubleshoot, repair and/or overhaul ground support equipment., • Check and service ground support equipment with fuel, water, oil and hydraulic fluid., • Diagnose problems using test equipment and applicable manuals., • Build and assemble machines or mechanical components according to requirements., • Inspect machines, engines, transmissions etc. and run diagnostic tests to discover functionality issues., • Conduct repairs aiming for maximum reliability., • Perform thorough maintenance on machinery, equipment and systems., • Clean and apply lubricants to machinery components., • Replenish fluids and components of engines and machinery., • Provide consultation on correct maintenance and preventative measures to machine or vehicle users., • Keep logs of work and report on issues, • Completion of GSE paperwork as required. Unless the accommodation would impose an undue hardship on the operation of our business, we will endeavor to make a reasonable accommodation to the known limitations of a Team Member due to pregnancy, childbirth, and related medical conditions or of a qualified applicant with a disability. If reasonable accommodation is needed to perform essential job functions and/or to receive other benefits and privileges of employment, please contact (insert). The following are essential to the job, in addition to those listed above and on the chart in this description. Certain functions may be performed in varying weather and environmental conditions, such as precipitation, extreme temperatures, jet engine fumes, dust, and noise. The tasks are performed inside and outside near stationary and moving aircraft (including spinning propellers and engines). • Frequently lift and/or move up to 75 pounds., • Read, write and fluently speak and understand the English language., • Ability to read and comprehend instructions, short correspondence and memos., • Write routine business correspondence., • Effectively present information in one-on-one and small group situations to customers, clients, supervisor and employees., • Deal with problems involving several concrete variables in standardized situations., • Apply common sense understanding to carry out detailed but uninvolved written or oral instructions., • Add, subtract, multiply and divide in all units of measure using whole numbers, common fractions and decimals., • Excellent knowledge of machinery and hydraulic, electrical and other systems and their components, • Aptitude in using various hand tools (screwdrivers, hammers etc.) and precision measurement tools (e.g. calipers), • Ability to follow established procedures and practices and read instruction, blueprints etc., • A strong commitment to all health and safety guidelines, • Very good communication skills, • A problem-solving ability, • Very good physical strength and stamina To perform this job successfully, an individual must be able to perform each essential job function satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions. • High School diploma or GED plus one (1) year experience and/or equivalent combination of education and experience, • Minimum of 18 years of age, • Ability to pass background checks (criminal and motor vehicle), drug tests, receive and maintain issuance of an airport security badge, and be insurable by the company's insurance policies., • Must be legally authorized to work in the country of employment., • Prior GSE or heavy equipment experience preferred., • Must have your own tools., • Must possess valid driver’s license., • Certification from a vocational school or completion of apprenticeship is a definite plus., • Valid certification (ASE) preferred. Pay ranges vary based on multiple factors, including, without limitation, skill sets, education, shift worked, responsibilities, seniority, geographical market, merit, output, productivity, prior training or experience, and travel. The pay starting rate for this position is 26.00/ hour, per the collective bargaining agreement. Qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin or protected veteran status. With more than 225 locations worldwide, Signature Aviation is the largest global network of private aviation terminals, delivering safe, convenient, and elevated experiences to those we serve. As a premier hospitality organization and a certified Great Place to Work™, we are committed to redefining private air travel. Our nearly 6,000-strong team of aviation experts and enthusiasts is dedicated to delivering excellence to our guests and communities, and it starts with taking care of our team. Signature provides a variety of benefits, programs, and resources to support our team members’ overall well-being and professional development. We proudly volunteer and give back, focusing on elevating the neighborhoods where we operate, empowering the next generation of aviation professionals, and supporting our veterans. From your health to your financial wellness, there are several benefits for you and your family when joining Signature Aviation. Our Benefits: • Medical/prescription drug, dental, and vision Insurance, • Health Savings Account, • Flexible Spending Accounts, • Life Insurance, • Disability Insurance, • 401(k), • Critical Illness, Hospital Indemnity and Accident Insurance, • Identity Theft and Legal Services, • Paid time off, • Paid Maternity Leave, • Tuition reimbursement, • Training and Development, • Employee Assistance Program (EAP) & Perks Qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, or other protected characteristics.

Position Summary Our client is seeking a Master-Level Technician who can seamlessly blend electrical expertise, fabrication talent, aesthetic sensitivity, and problem-solving curiosity. This role demands more than technical competence — it requires an individual who views each car as a canvas, each part as an opportunity for innovation, and each challenge as a puzzle worth solving. This position is ideal for someone who was a lifelong tinkerer, understands that modern cars are digital-electromechanical devices, and takes genuine pride in every detail — from relay logic to the precision of a hidden bracket. Primary Responsibilities Electrical Systems & Integration • Design, wire, and integrate custom automotive electrical systems — analog and digital — with OEM-level execution., • Expertly work with 12V systems, high-current circuits, and parasitic draw troubleshooting., • Wire logic-based circuits using Bosch-style relays, solid-state modules, and OEM harness integration., • Build clean, protected, and serviceable harnesses with professional routing and circuit protection., • Modify and reconfigure alternator systems — including ECU-controlled modern alternators and vintage generator systems., • Retrofit vintage systems to modern electrical standards (6V to 12V conversions, etc.). Audio Systems & DSP Tuning • Design and install integrated audio systems in modern and vintage cars., • Execute DSP tuning using JL Audio MAX, AudioTech Fischer, and similar processors., • Install and fabricate enclosures for custom subwoofer and full-range speaker systems., • Understand and compensate for OEM audio system constraints (all-pass filters, phase issues, etc.)., • Perform reference-based tuning with personal media libraries. Fabrication & Craftsmanship • Fabricate custom brackets, panels, and assemblies in metal, plastic, and wood., • MIG & TIG weld as needed for daily project requirements., • Build from raw materials: ABS, acrylics, EPDM, metals, composites, etc., • Modify OEM parts with extreme precision — including plastic shaping, upholstery wrapping, and surface finishing., • Wrap, finish, and detail custom installations to exacting aesthetic and durability standards. Project Planning & Documentation • Organize every component of a build using labeled bins, tags, and photo documentation., • Communicate clearly with the team and clients regarding progress, challenges, and goals., • Help create custom user manuals for each build, documenting non-OEM systems and integration details., • Follow project planning protocols to execute multi-phase builds with precision and accountability. Required Experience & Knowledge • Minimum 5–10 years in advanced custom automotive work, with an emphasis on electrical systems., • Strong grasp of automotive relay logic, circuit design, and parasitic draw diagnostics., • Ability to design and install multi-amp audio systems with DSP, EQ, time-delay, and crossover logic., • Hands-on experience fabricating audio enclosures and integrating systems into exotic or vintage interiors., • Extensive use of multimeters, oscilloscopes, soldering/desoldering tools, and harness-building equipment., • Comfort working on a wide variety of vehicles — from 1950s European sports cars to modern EVs and SUVs.

Full-Time | In-Person | Overtime Available About Us A.T. Becker & Associates is a small financial firm in Scarsdale, NY providing tax preparation, bookkeeping, and financial planning for individuals and small businesses. We offer a supportive, educational, and team-oriented environment where growth and professional development are encouraged. Role Description This is a full-time on-site Administrative Assistant role located in Scarsdale, NY. The Administrative Assistant will be responsible for managing day-to-day office operations, including performing clerical tasks, maintaining professional communication, scheduling and coordinating meetings, and assisting executives with administrative needs. The role involves handling phone inquiries, organizing documents, and supporting the overall efficiency of the office. Candidates should demonstrate exceptional attention to detail, professionalism, and strong organizational skills. Hours will generally be M-F 9:00 am - 5:00 pm. However, during busy seasons there will be the opportunity for overtime including weekend and evening hours. The full-time administrative assistant is expected to additionally work one weekend day (Saturday or Sunday) from February to April 15. Qualifications • Interpersonal skills, • Strong written and verbal communication, • Organization skills, • Reliability, • Microsoft Office proficient, • Teamwork skills, • Professional attitude and demeanor, • Ability to multitask in a fast-paced environment, • Knowledge of Quickbooks (preferred), • 3 years of office experience (preferred) Compensation & Benefits • Compensation commensurate with experience and qualifications, • Paid overtime opportunities, • Opportunities for professional growth and advancement, • Supportive, education-focused work environment Work Location • In person — Scarsdale, NY 10583, • No remote work available Benefits • Retirement plan, • Retirement plan matching, • Health insurance, • Dental insurance, • Vision insurance, • Paid sick time, • Paid time off Due to financial services industry compliance and regulatory requirements, and the fact that you will be handling clients' assets and personal information, extreme accuracy and attention to details are required. You will be finger printed according to FINRA Requirements.

Job DescriptionSystem Installer Level IFull Time White Plains, NY, USRequisition ID: 1013ApplySalary Range:17.00 To 25.00 (USD) Hourly We are an established IT and Audio Video Services firm looking to hire an energetic, motivated individual with strong interpersonal skills to work with our team of seasoned installers. Systems Installer Level 1 positions available The position calls for a hard-working individual with varied skills ranging from low voltage cabling to light construction. Good communication and organizational skills are a must. Definite opportunity for growth within the company. Technical expertise – May specialize in one type of system, such as security alarms or audio-visual equipment, but should be comfortable with installing and repairing a wide range of systems, requiring diverse technical knowledge. Computer skills – Basic computer skills necessary to maintain and update customer information, repair logs, inventory, and similar records. Physical endurance – This is sometimes a physically demanding job that requires standing for extended periods, climbing ladders, and occasionally working outside in extreme temperatures. Installers may also lift and pull items weighing up to 50 pounds. Safety knowledge – there's always a risk when working with low voltage systems so installers must know what protective gear to use and how to work without putting themselves or others at risk. Note: Clients require fingerprinting and background checks. Candidates will have to comply.

House Person Job Reference Number: 38899 Employment Type: Part-Time Segment: Dining & Events Brand: Abigail-Kirsch Location: Tarrytown, New York (US-NY) We are looking to add a motivated, skilled Houseperson - Hybrid to our Abigail Kirsch team, supporting both the Tappan Hill Mansion in Tarrytown, NY and The Loading Dock in Stamford, CT. As a Houseperson, you will set up tables, chairs, linens, and event spaces; maintain the cleanliness of ballroom areas, restrooms, office spaces, guest areas, and back-of-house spaces; assist with event room set-up and breakdown; perform general cleaning, repair, and preventative maintenance; and support event operations while maintaining Abigail Kirsch’s high standards of quality. This position requires flexibility to work at either property based on business levels, event schedules, and operational needs. · Set-up, breakdown, and clean event rooms per diagram. · Maintain a neat, organized, and safe working environment. · Place linen and skirting on all tables for functions. · Set tables with pads, pencils, candies, or other meeting materials unless otherwise instructed. · Pin-spot tables, bars, and buffets. · Refresh rooms in between functions and room turns. · Monitor and refresh guest bathrooms during events and spot check throughout the day. · Refresh paper goods in dispensers, as necessary. · Empty trash as needed. · Move furniture, tables, chairs, carts, and event equipment for room turns. · Ensure event rooms are showcase-ready in between events. · Assemble, break down, clean, and maintain dance floors. · Stack, store, and organize equipment in storage areas when not in use. · Assist Captains, Banquet Event Managers, Banquet Service Managers, and management during events when needed. · Monitor gallery, lobby, ballroom, office, and public spaces for cleanliness. · Vacuum ballroom and office areas as assigned. · Clean windows and ledges. · Spot clean chairs, carpets, acoustic walls, and movable partitions. · Perform deep cleaning as needed. · Clean, organize, and maintain storerooms, lumber rooms, closets, and back-of-house spaces. · Disinfect and sanitize all restrooms, locker rooms, and assigned guest areas. · Clean and maintain guest suites as assigned. · Sweep and mop floors. · Clean mirrors. · Polish steel, chrome, and other finished surfaces. · Spot clean and shampoo carpets and chairs as needed. · Dispose of all garbage. · Assist with hanging banners or client-requested event items. · Assist when necessary and fill in when needed as a restroom attendant. · Perform general repair and maintenance of the facility and equipment. · Paint walls, doors, woodwork, wood paneling, and touch-up areas when needed. · Check and change light bulbs as assigned. · Assist with minor plumbing issues that may arise, including clogged drains, flooding, leaks, or similar facility concerns. · Report any hazardous conditions, broken equipment, maintenance concerns, or sanitation issues to the Facilities Supervisor, Facilities Manager, or management. · Perform all reasonable requests by the Management team. · Attend and participate in all scheduled meetings and training sessions. · Know and follow all Abigail Kirsch, Tappan Hill Mansion, and The Loading Dock emergency and safety procedures. · Follow proper time keeping policies and procedures. · Follow the sign-in and sign-out procedure for keys. · Minimum one year of banquet set-up, custodial, facilities, or related hospitality work preferred. · Basic knowledge of painting, window cleaning, restroom sanitation, general cleaning, and facility upkeep. · Ability to handle equipment such as vacuums, sweepers, carpet extractors, mops, carts, and related cleaning equipment. · Ability to work with cleaning chemicals in a safe OSHA-compliant manner. · Ability to withstand varying indoor and outdoor work conditions, including extreme temperatures when required. · Ability to deal effectively with internal and external customers to obtain information and resolve problems quickly. · Ability to communicate effectively with associates, management, clients, guests, and vendors if necessary. · Ability to work a flexible schedule to accommodate business levels, including nights, weekends, holidays, and event-based shifts. · Ability to lift, carry, push, and pull tables, chairs, carts, garbage, boxes, and event equipment using safe work practices. · Ability to follow diagrams, verbal instructions, written instructions, cleaning procedures, maintenance direction, and safety policies. $17 - $18 an hour. • Medical (FT Employees), • Dental, • Vision, • Voluntary UNUM offering for Accident, Critical Illness and Hospital Indemnity, • Discount Program, • Commuter Benefits (Parking and Transit), • EAP, • 401k, • Sick Time, • Holiday Pay (9 paid holidays), • Tuition Reimbursement (FT Employees), • Paid Time Off #LI-DM1 #indeedelior About Abigail Kirsch: Started in the 1970s as a family-owned catering company, Abigail Kirsch has grown into one of New York’s premier caterers. Our steady growth has allowed us to bring our hospitality, service, and delicious food to Connecticut, Westchester, and New York City. About Elior North America: Elior North America is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status. We are committed to diversity and encourage applications from people of all backgrounds and abilities. We take pride in supporting the development of our employees and their skills at all levels and in fostering an environment of growth. At Elior North America, we are committed to offering growth and advancement opportunities for all of our employees. The valuable skills and experience you’ve gained with Elior will propel you further in your career, whether with our corporate office or one of our brand segments. Disclaimer: This job description can be revised by management as needed.

Job Description Are you interested in becoming a part of an innovative in-house maintenance facility working on private aircraft? Flexjet, an award-winning organization, is currently looking for an experienced Avionics Service Tech to join our team! This position is located at our White Plains, NY location Starting Pay Rate $ 85,120.00 + (based on experience). DUTIES & RESPONSIBILITIES • Troubleshoots, repairs, modifies and calibrates aircraft electronic systems and components, • Certifies integrated avionic systems and components at intermediate levels utilizing shop avionics support equipment and specialized precision measuring equipment, • Analyzes malfunctions and calibrates and performs maintenance on avionics support equipment using calibration standards, • Installs, aligns and wires electrical and electronic components such as sensors, radio communications, antennas and lights, • Performs continuity checks and functional checkouts of complete aircraft systems, • Process Inspection forms and sign name, as technician, after their work is completed, • Notify proper authority of any suspected unairworthy conditions found during the performance of their duties, • Sets up and operates necessary test equipment, • Conducts functional and operational tests to evaluate performance and reliability, • Demonstrates excellent communication skills, professionalism, and a positive customer service attitude without compromising quality, • Presents a clean and neat work area to customers facility cleanliness and general housekeeping, • Performs other duties as required REQUIRED SKILLS • High School diploma or equivalent, • A&P License, • 4 years of related corporate avionics experience, • Must be highly proficient in both troubleshooting/service and installation sides of the role, • Advanced certification in avionics preferred, • Must be flexible with shift work (3rd shift and one day per weekend), • Must be able to stand, sit, and bend for extended periods of time, • Must be able to lift up to 30 pounds., • Valid Drivers License, • Proficiency in Microsoft Office Suite, • Ability to pass background check and achieve airport badge WORK ENVIRONMENT While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme weather conditions. The noise level in the work environment and job sites can be loud. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit, climb, balance, stoop, kneel, crouch or crawl. The employee must frequently lift and move up to 10 pounds and occasionally lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.

Job Description Job Description – Ramp Agent Business Unit: HPN - Airline Services Reports To: Ramp Supervisor / Ramp Manager FLSA Classification: Non‑Exempt Job Category: Regular, full‑time Primary Work Location: On‑Site, Airport Airside Operations Country: USA Job Summary Ramp Agents play a critical role in supporting the safe, efficient, and timely movement of aircraft through the performance of essential ground handling duties. Includes loading and unloading baggage, operating ground service equipment, conducting FOD inspections, and completing aircraft servicing such as water, lavatory, and cabin preparation. Agents assist with marshalling, pushbacks, and wing walking to ensure aircraft arrive and depart safely while maintaining clear, hazard‑free movement areas and supporting passenger needs, including wheelchair assistance and gate preparation. Requires a minimum high school diploma or GED, with prior customer service or ramp/aviation experience preferred. Must be able to perform physically demanding tasks in all weather conditions and apply technical skills such as aircraft marshalling, hand‑signal communication, pushback, chocking and securing aircraft, time‑critical turnaround coordination, and basic aircraft type recognition. Ability to safely operate ground service equipment and follow established procedures is essential to ensuring compliance and operational accuracy. Shift work is required, including evenings, nights, weekends, holidays, and overtime, as operational demands dictate. Essential Job Functions • Load and unload passenger baggage., • Park and dispatch aircraft, including marshalling, pushback, wing walking, chocking and cone placement., • Operate ground service equipment such as belt loaders, tugs, GPUs, and de-icing vehicles., • Provide water and lavatory servicing for aircraft., • Clean, prepare, and restock aircraft cabins on overnight aircraft, • Conduct aircraft deicing operations in accordance with airline procedures., • Perform Foreign Object Debris (FOD) inspections to maintain a hazard‑free ramp., • Provide aisle chair assistance to passengers as needed., • Prepare ramp equipment and gate areas for arriving and departing aircraft., • Maintain clear obstacle‑free areas for all aircraft movements., • Ensure proper loading of baggage, gate‑checked items, and security‑screened bags., • Support ramp team members to ensure safe on time departures., • Perform additional duties as assigned to support station operations. Competencies • Maintain strict adherence to safety protocols, PPE requirements, and regulatory standards., • Work effectively in a high‑coordination environment and supports team goals., • Demonstrate alertness and evaluates conditions in a dynamic airside environment., • Functions effectively in adverse weather, fluctuating schedules, and high‑pressure situations., • Interact respectfully with passengers and airline partners, including accessibility support., • Ensures accuracy in baggage handling, equipment placement, and compliance steps., • Communicate clearly with coworkers, supervisors, and flight crews., • Demonstrates reliability, punctuality, and consistency in shift‑based operations., • Make timely decisions when options are clear, escalating appropriately for higher risk or ambiguity, • Accept ownership and accountability, consistently delivering accurate, high-quality results with a sense of urgency Required Skills & Qualifications Education & Experience • Minimum high school diploma or GED required., • Prior customer service or ramp/aviation experience preferred. Technical Skills / Expertise • Aircraft marshaling and hand‑signal communication, • Aircraft pushback operations, • Chocking, cone placement, and aircraft securing, • Time‑critical turnaround coordination, • Basic aircraft types and configurations (A320, A220 etc.), • Load control basics (weight & balance awareness) and use of baggage scanners, • Ability to operate ground service equipment (training provided), • Ground power unit (GPU) and air start unit operation, • Use of handheld radios and dispatch systems, • Safe loading and unloading of baggage, • Reading load sheets and flight documentation, • Aircraft servicing (lavatory, potable water, cabin cleaning coordination), • Manual handling techniques to prevent injury, • Knowledge of ramp safety procedures and aircraft movement areas, • Hazardous materials recognition (IATA DGR awareness) Other Requirements • Must be at least 18 years of age., • Possess and maintain a valid driver’s US license., • Work flexible schedules: evenings, nights, weekends, holidays, overtime., • Able to work in extreme weather conditions., • Maintain required airport/airline clearances and certifications., • Demonstrate the ability to perform under pressure, work in extreme weather conditions, and have physical stamina for lifting and working long shifts, • Noise and jet blast awareness, • Must be able to work effectively as part of a team., • Ability to read, write, and communicate effectively in English language. Preferred Skills • Experience in aviation, transportation, logistics, or airport operations., • Strong communication and customer service skills., • Ability to follow detailed instructions and safety checklists. Work Authorization & Travel Requirements • Must be authorized to work in the United States without sponsorship., • Must comply with airport credentialing requirements to work in secure areas., • Travel is not typically required beyond local airport access. Work Environment, Physical Demands & Requirements • Work performed primarily outdoors on airport ramps and aircraft service areas., • Exposure to extreme weather (heat, cold, snow, rain, wind) and high‑noise conditions., • Requires use of hearing and visual protection, safety vests, gloves, and other PPE., • Requires standing and walking for extended periods, bending, kneeling, stooping, and lifting up to 50+ pounds., • Requires visual acuity and awareness for safe movement around aircraft and ground equipment., • Requires ability to work variable schedules aligned with flight operations., • Must be able to navigate and work safely around aircraft, vehicles, and heavy equipment., • This job description is not intended to list every duty. Duties may change at any time, with or without notice. The Company complies with the Americans with Disabilities Act (ADA), as amended by the ADA Amendments Act, and all applicable state or local law. Consistent with those requirements, the Company. will reasonably accommodate qualified individuals with a disability if such accommodation would allow the individual to perform the essential functions of the job, unless doing so would create an undue hardship. The physical demands described here are representative of those that must be met by a team member to successfully perform the essential functions of this job. Applies to all team members, including those represented by a labor union or bargaining unit. If any part conflicts with a collective bargaining agreement (CBA), the CBA will take precedence. Compensation and Benefits Overview Benefits may include: • Medical, Dental, and Vision Plans, • Health Savings and Flexible Spending Accounts, • Disability Insurance, • Life and AD &D Insurance Options, • Supplemental Insurance Plans, • 401(k) Retirement Savings Plan, • Paid Vacation, Sick Time, and Company Holidays, • Training and Career Development Opportunities Equal Employment Opportunity We are an equal opportunity employer and are committed to providing a workplace free from discrimination. We do not discriminate based on race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, veteran status, or any other characteristic protected under applicable federal, state, or local law. We provide reasonable accommodation to qualified individuals with disabilities and encourage applications from all qualified candidates.

Job DescriptionJob Title: Industrial Mechanical Technician – Class A Department: Engineering Reports To: Maintenance Manager / Chief Engineer Location: Strike Force Staffing Employment Type: Full-Time or Part-Time Availability: Open Availability Required Number of Openings: Salary Range: Competitive Work Environment: Exposure to extreme temperatures (hot/cold); food handling environmentJob Summary:The Industrial Mechanical Technician is responsible for providing mechanical and electrical maintenance support at SFS client facilities. This role focuses on preventative maintenance, troubleshooting, equipment repair, and supporting system installations to ensure safe, reliable, and efficient plant operations. Technicians are assigned to client sites based on their weekly availability and may work across multiple facilities depending on operational needs. Key Responsibilities: • Diagnose and repair mechanical, electrical, pneumatic, and hydraulic issues on various types of production equipment., • Perform scheduled preventive maintenance and inspections on equipment to ensure reliable operation., • Use CMMS (Computerized Maintenance Management System) to manage work orders and maintenance logs., • Inspect, repair, and replace machine components such as bearings, filters, wiring, valves, switches, and gauges., • Interpret electrical/mechanical blueprints and schematics to troubleshoot systems., • Adjust and calibrate control instruments and functional components., • Start, test, and monitor machines to ensure proper performance after maintenance or repair., • Support production uptime by responding to emergency breakdowns and participating in on-call coverage., • Document maintenance activity and communicate effectively across shifts to ensure continuity., • Maintain a clean and safe workspace, complying with OSHA standards, GMP practices, and internal food safety protocols., • Contribute to the continuous improvement of maintenance systems and processes., • Follow all company safety rules, procedures, and PPE guidelines at all times.Qualifications & Skills:, • Associate degree in Mechanical Engineering or equivalent technical training (preferred but not required)., • Minimum 3 years of experience as an industrial maintenance technician in a manufacturing environment., • Strong mechanical and electrical troubleshooting skills up to 480V., • Ability to read and interpret mechanical and electrical schematics., • Familiarity with bakery or food processing equipment is a plus., • Proficient in Microsoft Word, Excel, and Outlook., • Strong verbal and written communication skills., • Willingness to work flexible hours and overtime as needed., • NY Boiler License is a plus, but not required.If you're a hands-on maintenance professional with a passion for keeping production running at peak performance, we want to hear from you. Join a team where your skills make a direct impact every day.

Job Description PRIMARY JOB RESPONSIBILITIES: The ideal candidate for the Senior Supply Chain Planner position needs to be a self-motivated and results driven professional with strong analytical and problem-solving skills who enjoys working in a fast paced, team-oriented environment. The Senior Supply Chain Planner will ensure that the right product is available in the right quantity and time to support customer demand while meeting inventory targets. The Senior Supply Chain Planner will report to the Supply Chain Manager and will be responsible for the following: • Managing the supply plan to meet product demand and inventory targets for multiple product lines., • Place purchase orders to suppliers to ensure supply is on time, as needed to achieve customer service target levels., • Utilizing various management control techniques to successfully monitor and analyze ongoing activities, changes in actuals vs. forecasts data, revisions to safety stock strategies based on historical sales and seasonality curves., • Lead the validation of master data in ERP and planning systems, including material masters, BOMs, lead times, safety stock, and planning parameters to ensure accurate planning, procurement, and production execution., • Leads supply planning for effective execution on new product introductions, transitions and product discontinuance for respective product lines. Responsible for ensuring proper inventory levels (prebuilds, factories capacity constraints, or phase out strategy) to ensure overall working capital strategies are met., • Monitoring and providing awareness to the Sales and Marketing teams regarding Excess / Aging inventory., • Issuing production schedules and following up to ensure completion by the requested date., • Participating in cross functional new item launch meetings to collaborate and review revised timelines regarding new product launches., • Delivering early warning to Sales and Customer Service for items with potential issues. Conducting what if analysis and developing recommendations to prevent stock outs., • Championing resolution for items out of stock or potential stock outs. Compiling all feedback and necessary data and then providing back in stock dates to Sales and Customer Service., • Preparing and issuing monthly long-term forecasts to ZWILLING subsidiaries and quarterly forecasts to all external suppliers., • Lead S&OP (Sales & Operations Planning) meetings and drive alignment between demand and supply strategies., • Developing and issuing monthly KPIs to the organization along with any respective suppliers regarding supplier performance. Recommending changes to sourcing strategies when needed., • Working with Customer Service, Sales and Marketing for daily sales order support and inventory allocation., • Mentor and support supply planners and cross-functional teams on best practices and continuous improvement initiatives., • Proactively identifying and implementing ideas for continuous improvement opportunities. QUALIFICATIONS: • Bachelor’s degree, ideally in Supply Chain Management, Logistics, Engineering or Finance or related field; Master’s degree in related field a plus, • CPIM or CSCP by APICS, CPSM by ISM, or other equivalent certification preferred, • 4+ years of supply chain experience in planning, production, inventory control, and manufacturing in a high-volume consumer products company., • Strong fundamentals and experience in Demand and Supply Planning is a requirement for this role. Experience using Advanced Planning Systems is preferred., • Exposure to housewares preferred, • Project Management experience a plus, • Proficient in Microsoft Office products and AS400 systems or SAP Hana., • Strong analytical and problem-solving skills, • Expert level in MS Excel (Power Query & Power Pivot skills) required. SQL, Power BI & Python experience is preferred, • Detail oriented, attention to extreme accuracy and extensive spreadsheet analysis, • Sound organizational skills: planning, expediting, prioritizing and multi-tasking, • Excellent collaboration skills to liaise with stakeholders across different functions, • Excellent written and verbal communication skills, • Good presentation skills, • S. citizens and those authorized to work in the U.S. are encouraged to apply. We are unable to sponsor at this time. Base Compensation Range: $95,000.00 - $110,000.00 per year contingent upon experience. ABOUT US: For over 285 years, ZWILLING J.A. Henckels has offered premium products that enhance the lives of professional and home chefs worldwide. Since its start as an esteemed cutlery brand, the company has grown to include a coveted collection of cookware, flatware, glassware and kitchen gadgets. Tradition, quality, innovation, and craftsmanship are its ingredients for success. Today, ZWILLING J.A. Henckels is an international industry leader that sells products in 100 countries with the help of ten wholly owned subsidiaries. Always looking forward, ZWILLING has recently acquired global heritage brands —Staub (France), Demeyere (Belgium), Ballarini (Italy), and MIYABI (Japan)—to give its customers access to the most exceptional cookware and cutlery. We offer great benefits including competitive salary, medical & dental insurance, 401(k) plan, paid time off, and employee discounts. If you’re interested in being part of a prominent, global culinary company, submit your resume and cover letter with salary requirements today! No phone calls or recruiting agencies please. #LI-Hybrid

Job DescriptionJob Description The NYC Department of Environmental Protection (DEP) enriches the environment and protects public health for all New Yorkers by providing 1.1 billion gallons of high quality drinking water, managing wastewater and stormwater, and reducing air, noise, and hazardous materials pollution. DEP is the largest combined municipal water and wastewater utility in the country, with nearly 6,000 employees. DEP's water supply system is comprised of 19 reservoirs and 3 controlled lakes throughout the system’s 2,000 square mile watershed that extends 125 miles north and west of the City. The Bureau of Water Supply seeks to hire an Associate Project Manager I within the Drinking Water Operations South Engineering Group, Drinking Water Operations Directorate located in Valhalla, New York. Under supervision of the Engineering Manager, the Associate Project Manager I will be responsible for overseeing the bureau’s service contracts and providing technical support to the Engineering Group in the maintenance, repair, testing, and inspection of equipment and structures essential to the operation of drinking water treatment facilities. This work ensures continued compliance with federal and state drinking water regulations and supports the reliable delivery of safe, high quality water. The APM I coordinates project scope, guides design development, and monitors construction activities to ensure that capital and maintenance projects are executed efficiently, safely, and in alignment with regulatory and operational requirements. Success in this role requires strong organizational skills, clear communication, and a commitment to supporting the bureau’s critical public service responsibilities. Specific duties include: • Provide technical support to the Engineering Group by preparing and reviewing plans, drawings, specifications, and cost estimates for in house service and construction projects. Responsibilities also include developing technical sketches and performing mathematical calculations., • Assist with coordination during construction and repair activities for in house projects, capital projects, and Job Order Contracts (JOC's) projects of moderate difficulty and complexity within the DWO South directorate., • Support technical documentation including minor design work for new installations or equipment replacements. Preparing technical specifications, engineering plans, and contract bid packages, developing cost estimates or obtaining vendor quotes for supplies, equipment, tools, and services, and assisting with research or investigations related to equipment or facility deficiencies., • Establish project time and cost schedules to support effective planning and execution., • Determine and coordinate activities among the individuals, agencies, and departments responsible for project completion., • Review schedules, reports, and orders prepared by consultants, contractors, and agencies to ensure conformance with project timelines and requirements., • Monitor work performance and resolve issues that arise during meetings or project coordination activities., • Meet with City agencies, contractors, and other stakeholders to support project planning and execution., • Participate in the bid process and contractor selection., • In the temporary absence of the immediate supervisor, assume the duties of that position as needed. Technical Competencies: • Knowledge in trades (mechanical, plumbing, electric, etc.) and construction means and methods, • Versed in NYC and NYS building code, • Mechanically inclined, • Understands financial planning and forecasting, • Good recordkeeping, • Detailed attention to scheduling Non-Technical Competencies: • Conscientious, • Information sharing, • Critical and analytical thinking Standards: • Punctuality, • Employs safe work practices Medical Requirement Candidates will be required to wear a respirator while performing the essential functions of this position. The selected candidate must be physically able to wear a respirator and must not have any condition that would prevent a good face seal when wearing a respirator. OSHA regulations have established medical guidelines for wearing a respirator. Therefore, the candidate will be required to have pre-employment and periodic post-appointment medical examinations to demonstrate that they meet applicable OSHA standards and to monitor medical status. Once hired, employees must continue to satisfy OSHA regulations for the duration of their employment. License Requirement At the time of appointment, candidates must possess a Motor Vehicle Driver License valid in the State of New York. Employees must maintain this license for the duration of employment. (This is a brief description of what you might do in this position and does not include all the duties of this position.) Some of the physical activities performed by Associate Project Managers and environmental conditions experienced are: walking to and from inspection sites and during the course of inspections, climbing and descending ladders or stairs to get to areas to be inspected, including exposed heights and confined spaces, standing for extended periods of time, distinguishing colors, bending, stretching, and stooping during inspections, communicating orally, climbing over and around various objects, walking in areas that may be damp, moldy, dark, dusty, smoky, vermin infested, noisy, acrid, or containing fumes, emissions, extreme heat and cold, lead dust, asbestos, or other potentially hazardous material, and working outdoors in all kinds of weather. Special Working Conditions: Associate Project Managers may be required to work shifts including nights, Saturdays, Sundays, and holidays. Preferred Skills • Knowledge of Microsoft Office Suite including Word, Excel, Outlook, PowerPoint and Project, • Critical thinking and effective independent data analysis skills, • Excellent oral and written communication skills, • An understanding of project management principals, • An understanding of drinking water treatment processes and technology, • Ability to work in high volume environment, • Ability to traverse active construction sites and operational facilities (including walking on uneven terrain), • Ability to perform outdoor job duties year round -Ability to enter confined spaces or utilize scaffolding, ladders, or other means to access job Additional Information The City of New York is an inclusive equal opportunity employer committed to recruiting and retaining a diverse workforce and providing a work environment that is free from discrimination and harassment based upon any legally protected status or protected characteristic, including but not limited to an individual's sex, race, color, ethnicity, national origin, age, religion, disability, sexual orientation, veteran status, gender identity, or pregnancy. Work Location: 465 Columbus Avenue Valhalla, NY 10595 Valhalla is a hamlet in the Town of Mount Pleasant, Westchester County, NY approximately 28 miles from mid-town Manhattan. ASSOCIATE PROJECT MANAGER - 22427 Qualifications One year of full-time satisfactory experience in supervising employees performing project management work, such as planning, administering, managing, coordinating, or expediting, on engineering and/or architectural and/or landscape architectural projects, or supervising a construction project with a value of $1,000,000 or more, and either: 1. A baccalaureate degree from an accredited college or university in engineering, engineering technology, architecture, landscape architecture, architectural technology, construction, construction management, construction technology, sustainable design, urban planning, urban studies, city planning, transportation planning, business administration, or public administration, and one year of full-time satisfactory experience in project management work, such as planning, administering, managing, coordinating, or expediting, for engineering and/or architectural and/or landscape architectural projects; or, 2. A four-year high school diploma or its educational equivalent and five years of experience as described in "1" above; or, 3. A four-year high school diploma or its educational equivalent plus any combination of college or university education and/or experience described in "1" above to make up the equivalent of five years of education and experience. One year of experience credit will be given for: (a) each 30 semester credits of college or university education leading to a bachelor's degree from an accredited college or university in engineering, engineering technology, architecture, landscape architecture, architectural technology, construction, construction management, construction technology, sustainable design, urban planning, urban studies, city planning, transportation planning, business administration, or public administration; (b) a Master’s degree from an accredited college or university in one of the disciplines described in "1" above; (c) a Juris Doctor degree, or (d) a valid New York State license as a Professional Engineer, Registered Architect or Registered Landscape Architect. Where experience which is primarily of a design nature is not acceptable towards meeting the qualification requirements. In addition to meeting the qualification requirements for Assignment Level I, candidates must have at least one additional year of experience as described in "1" above in a supervisory capacity or have served for at least one year as a project manager for a large and/or complex construction project. In addition to meeting the qualification requirements for Assignment Level I, candidates must have at least two additional years of experience as described in "1" above in a supervisory capacity or have served for at least two additional years as a project manager for a large and/or complex construction project. Additional Information The City of New York is an inclusive equal opportunity employer committed to recruiting and retaining a diverse workforce and providing a work environment that is free from discrimination and harassment based upon any legally protected status or protected characteristic, including but not limited to an individual's sex, race, color, ethnicity, national origin, age, religion, disability, sexual orientation, veteran status, gender identity, or pregnancy.

Ability to bend, stoop, and twist continuously throughout the day Work Environment: + Work in/or about situations near direct automotive traffic + Work near or about natural bodies of water + Ability to work in extreme conditions - temperatures may exceed 100 degrees Fahrenheit + Ability to

Job Description Broadview at Purchase College GENERAL SUMMARY: A unique opportunity exists to join a team in creating a vibrant senior learning community on the campus of Purchase College, State University of New York. The residents of this university-based retirement community will be able to enjoy the many amenities of the college including the renowned Neuberger Museum of Art, the Performing Arts Center, the academic and athletic facilities, and the park-like campus. They will be able to enjoy all these benefits while living in a village designed specifically for their interests and needs. As part of the Purchase College community, Broadview residents will enjoy both formal and informal programming and collaborative opportunities designed to promote intergenerational engagement with members of the college community, ranging from classes and mentoring to providing employment opportunities for students. Broadview will offer the full continuum of services, inclusive of Independent Living, Assisted Living, Enhanced Assisted Living, and Memory Care. INCLUSIVE AND COLLABORATIVE CULTURE: We are dedicated to promoting diversity, equity, and inclusion. Diversity is the commitment to a community of equity and access through the acceptance of all aspects of human difference. This includes but is not limited to age, disability, race, ethnicity, gender, gender expression and identity, language heritage, national origin, sexual orientation, religion, socioeconomic status, status as a veteran and worldview. Broadview at Purchase College is proud to be SAGE CARE certified, and all employees will be provided with SAGE CARE training. Broadview at Purchase College is committed to integrating various cultural and social perspectives to engender excellence and to creating a collaborative culture in order to provide an exceptional experience for every employee and resident. GENERAL SUMMARY: The Dietary Aide is responsible for preparing and serving therapeutic diet trays to health center residents in accordance with posted therapeutic diet menus. PRINCIPLE DUTIES: Essential Job Duties: • Prepares therapeutic desserts and salads as required., • Serves meals in the health center., • Sets up tables in the health center dining room and breaks down same after meal., • Transports hot and cold foods to and from the health center., • Transports all required non food items to and from the health center. Other Duties: • Maintains station equipment and work area in safe and sanitary condition., • Maintains acceptable standards of personal hygiene and complies with department dress code., • Attends in-service training and education sessions as assigned., • Performs specific work duties and responsibilities as assigned by supervisor. Salary Range for this opportunity is $18 to$20 per hour. HOSPITALITY FOCUS: The Broadview Community fully embraces a culture of hospitality. To that end, we include the following hospitality promises as a guide for our interpersonal interactions with residents, co-workers, and guests: • We greet residents, employees and guests warmly, by name and with a smile., • We treat everyone with courteous respect., • We strive to anticipate resident, employee and guest needs and act accordingly., • We listen and respond enthusiastically in a timely manner., • We hold ourselves and one another accountable., • We embrace and value our differences., • We make residents, employees and guests feel important., • We ask “Is there anything else I can do for you?”, • We maintain high levels of professionalism, both in conduct and appearance, at all times., • We pay attention to details WELLNESS FOCUS: The [COMMUNITY NAME] employees are expected to promote a healthy community culture for all residents and employees. This is a whole-person approach to health and wellness which includes eight dimensions of wellness: Emotional, Environmental, Health Services, Intellectual, Physical, Social, Spiritual and Vocational. Through these efforts we can ensure and exceed residents’ wellness needs relating to their mind, body and soul, which may also have a positive effect on the employees, as a result. QUALIFICATIONS: • Ability to understand and follow instructions in English, communicate effectively, and perform simple arithmetic. Ability to understand measurements and conversions., • Previous experience in nursing home food service preferred., • Ability to plan and organize work, set up trays and plates in accordance with diet orders and interpret specifications and standards., • Ability to work in close cooperation with residents, guests, visitors, families, supervisor and peers. Requires empathy for the elderly. PHYSICAL REQUIREMENTS/WORKING CONDITIONS: Works indoors; must be able to stand/walk for 100% of the work day; must be able to lift and carry up to 30 lbs. independently; must be able to push and pull tray/bus/transport carts weighing up to 50 lbs. independently; must be able to bend, stoop, reach, and balance frequently throughout the work day. May be exposed to extreme temperatures from the ovens and freezers. Must be able to see, hear, and speak. May be exposed to industrial cleaning chemicals, communicable diseases including the HIV and Hepatitis B virus, and offensive odors. BENEFITS: Health insurance Dental insurance Vision Insurance Paid Time Off 401(k) 401(k) matching Employee assistance program Flexible spending account Life insurance Parental leave Reduced price employee meals

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo