Fusion medical jobs in Irvington, New Jersey - Page 2Create job alerts

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking a Power Electronics Engineer to design and develop the HTS magnet power supply systems for the company’s Eos integrated stellarator. This role focuses on building a high-current AC-DC converter for HTS magnets, requiring precision current regulation, high reliability, and scalable architecture. This role will be responsible for power stage design, topology selection, control algorithm interface, and protection systems, as well as thermal and mechanical integration. This is a high-impact engineering role with hands-on prototyping, testbed validation, and cross-functional collaboration with embedded systems and instrumentation teams. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. This role will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems.Key Responsibility Areas: • Lead the topology selection, component specification, and schematic design of the HTS Magnet PSU., • Design modular power converters with potential for arrayed operation and independent control., • Analyze and simulate power converter behavior (steady-state, dynamic, fault response) using PLECS, LTspice, or Simulink., • Integrate with embedded control hardware and firmware, ensuring proper current regulation, fast feedback, and fault handling., • Define and implement magnet protection mechanisms, including overcurrent shutdown, fast discharge, and crowbar circuits if needed., • Design thermal management systems, including heat sink layout, forced air/water cooling, and temperature monitoring for continuous operation., • Design PCB layout and support mechanical integration, cabling, and in-house assembly., • Develop test plans and perform hardware bring-up, debugging, and parameter optimization under staged load conditions.Ideal Experience & Skillsets:, • Bachelor’s or Master’s degree in Electrical Engineering, Power Electronics, or a related field., • 5+ years of hands-on experience designing and testing power converters, preferably in high-current or magnet power supply applications., • Proficiency in power stage design for DC/DC converters, buck/boost, full-bridge, or current-regulated linear stages., • Strong simulation and modeling skills using tools such as PLECS, LTspice, PSIM, Simulink, or Simplorer., • Experience with IGBTs, MOSFETs, SiC/GaN devices, and high-current busbar and interconnect layout., • Familiarity with current sensors, signal conditioning, and analog control circuits., • Experience with magnet power supplies, fusion, accelerator, or industrial high-current systems., • Knowledge of quench detection, crowbar protection, and superconducting magnet interface requirements., • Experience with thermal design and integration of cooling solutions in power electronics., • Exposure to EMI/EMC mitigation strategies and compliance testing., • Familiarity with FPGA- or DSP-based digital control systems., • Simulation: PLECS, LTspice, PSIM, Simulink., • CAD: Altium Designer, OrCAD., • Measurement: Oscilloscopes, Power Analyzers, Electronic Loads., • Communication: CAN, RS-485, Modbus., • Thermal: Flotherm, SolidWorks for mechanical integration.Company Benefits:, • Salary range $95,000-$160,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview: Thea Energy is hiring for a Director - Nuclear Engineering to lead our nuclear engineering team. This role will orchestrate the nuclear design and safety parameters essential to our first-of-a-kind integrated fusion system. You will be responsible for effectively leading and managing the day-to-day nuclear engineering program. Your efforts will directly contribute to the organization's success by ensuring safe, compliant, and efficient nuclear designs. Thea Energy’s dynamic team is made up of self-motivated individuals with an excitement for solving complex problems.Key Responsibility Areas: • Lead and grow a world-class team of nuclear engineers working on the cutting edge of commercial fusion power technology., • Direct the nuclear design of fusion systems, including blanket, shield, bioshield, and fuel cycle., • Manage the nuclear aspects of the system facility, including tracking and engineering the cascade of high-energy particles, managing activation products, and calculating dose rates., • Interface all aspects of safety, regulatory compliance, and environmental standards for the fusion device and facility., • Build organizational capabilities by recruiting and retaining talent, mentoring, and fostering professional growth., • Proactively collaborate and communicate with engineering system owners to prioritize and align development and execution with design schedules., • Be accountable for the quality and accuracy of the team's nuclear engineering work, reports, and presentations.Ideal Experience & Skillsets:, • MS or PhD in nuclear engineering., • 15+ years of work experience in nuclear engineering or a similar technical field., • Proven leadership experience in cutting-edge nuclear projects, such as fission reactor projects (e.g. small modular reactors, molten salt reactors, fast reactors, Gen-IV reactors) or accelerator projects., • Demonstrated experience thriving in a startup environment, with a track record of successfully building and managing teams., • Strong analytical skills and an understanding of the first principles of engineering., • A proven ability to motivate and catalyze teams into action through influence and strong leadership., • Excellent oral, written, and interpersonal communication skills, with the ability to translate complex business needs into technical solutions.Company Benefits:, • Salary range: $160,000-$230,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking experienced, highly motivated magnet engineers to join its rapidly growing team. The magnet engineering roles will design, build, and test high temperature superconducting (“HTS”) magnets. HTS magnets are foundational components of Thea Energy’s planar coil stellarator, making compact, simpler, and lower-cost fusion systems possible. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. These roles will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems. Key Responsibility Areas: • Rapidly design, build, and test HTS magnets, • Develop specifications for magnets based on system design and performance goals, • Optimize magnet design and run analysis using Multiphysics simulation software (e.g. Ansys EM, Structure, COMSOL, etc.), • Develop design tools, data analysis software, and algorithms using Python or similar, • Incorporate design for manufacturing principles and support first builds, • Produce design specifications and collaborate with vendors to get quotes and deliver hardware that meets qualifications, • Support the implementation of tooling and manufacturing, • Design and execute magnet testing, • Track and report results and progress against program goals and milestones, • Communicate and collaborate with internal and external stakeholdersIdeal Experience & Skillsets:, • Experience with magnets, cryogenics, vacuum systems, or transformer design, • Experience in design using CAD software (e.g. Solidworks, CATIA, NX, etc.), • Experience with Ansys and/or COMSOL, • Experience specifying machining, welding, and fabrication requirements, • Ability to work through and solve highly multidisciplinary engineering problems, • Ability to take initiative, work independently and as part of a team, • Ability to execute and flourish in a fast-paced, rapidly changing environment, • Comfortable working to aggressive deadlines, • Exceptional work ethic, • Strong team member with clear communication and collaboration skills, • Innate desire to learn, innovate, and critique ideas including one’s own, • At least a bachelor’s degree in physics, computer science, electrical engineering, mechanical engineering, materials engineering, or related fields, • Experience with magnetic confinement fusion, aerospace, medical devices, or other highly technical industries is idealCompany Benefits:, • Salary range $110,000-$180,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking for an experienced, organized, and motivated systems engineer. This position will work on an interdisciplinary team to integrate numerous first-of-a-kind technologies while developing scalable processes and procedures. The Systems Engineer will be responsible for the managing requirements, integration, and interfaces for one of the most consequential and cutting-edge technologies of our generation - fusion energy. The Thea Energy team is comprised of self-motivated, innovative, and collaborative individuals with an excitement for solving complex problems. This is a challenging position that requires a high degree of autonomy, and the ideal candidate must be able to move quickly. A proven track record of leading systems engineering, excellent communication skills, and a passion for new technologies and innovation is required.Key Responsibility Areas: • Develop system and interfacing requirements, protocols, and procedures, • Work closely with engineering and physics teams designing various systems to provide engineering coordination and support, • Ensure the efficient and systematic conversion of functional requirements into a scalable system architecture and execution strategy, • Assist in the management of technical, schedule, cost, and performance analysis for various development programs, • Develop and enact protocols to inform clear and efficient decision making processes, • Manage updates and changes to systems and interfaces, and monitor impacts to program schedule, cost, and performance, • Manage system configuration control, • Manage the product breakdown structure, • Coordinate with suppliers, vendors, and internal manufacturing engineering teams, • Coordinate design reviews and program management functions, • Institute the processes for, and help run HAZOPS and FMECA programs, • Implement an effective design integration program, • Develop and manage effective processes for making and tracking key decisions, • Develop and implement verification and validation processes, • Implement system design lifecycle management processes Ideal Experience & Skillsets:, • Bachelor's degree in a relevant engineering field, • 5+ years of experience in systems engineering, • Proven experience integrating large industrial and /or first-of-a-kind R&D projects (e.g. power plants, manufacturing facilities, particle accelerators, etc.), • Experience across mechanical, electrical, and fluid systems, • Experience with cryogenic, heating, fluid, vacuum, power electronics, and control systems is preferred but not mandatory, • Familiarity with the processes needed to build, test, troubleshoot, and scale complex mechanical and electrical systems, • Strong communication, collaboration, and interpersonal skills, • Ability to innovate, execute, and flourish in a fast-paced environment, • Exceptional work ethic, • Prioritization of safety above all else, • Ability to wear many different hats, • Team player who is excited to help others, • Ability to occasionally lift objects up to 50 lbs. Company Benefits:, • Salary range $85,000-$150,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview: Thea Energy is looking for an experienced, highly motivated executive to define the global supply chain strategy for commercial fusion power. As Vice President - Supply Chain, you will serve as a strategic partner to the Company’s leadership, finance & operations, and technical teams to architect the procurement and logistics infrastructure necessary to scale from prototype to power plant. This role will have a high degree of autonomy, and the ideal candidate must be able to move quickly to secure and manage critical path components in a competitive global market.Key Responsibility Areas: • Strategic Leadership: Develop and execute the long-term global supply chain and procurement strategy to support Thea Energy’s rapid growth and commercialization roadmap, • Organizational Development: Plan the hiring strategy and build a world-class supply chain organization, inclusive of sourcing, subcontracts management, supplier management, inventory/warehouse and logistics, • Global Sourcing & Partnerships: Lead supplier and partner negotiations and establish strategic partnerships with suppliers of critical materials (e.g. superconductors, vacuum vessels, power electronics), • Process Architecture: Manage and develop company policies, programs, and procedures for inventory control, logistics, and vendor management, evolving these processes as the company grows, • Cross-Functional Collaboration: Work with the Company’s leadership to support employee growth & development and ensure supply chain needs are integrated into engineering and financial planning, • Culture Building: Employ strategies to build, maintain, and grow the Company’s workplace culture within the operations team, fostering diversity and inclusionIdeal Experience & Skillsets:, • Executive Experience: 15+ years of relevant work experience, with significant time spent in senior leadership positions managing and growing supply chain organizations, • Scaling Expertise: Proven ability to support businesses through growth periods, specifically transitioning from R&D to full-scale manufacturing, • Strategic Acumen: Proven organizational skills with the ability to manage multiple projects and priorities while maintaining the "big picture" strategic vision, • Negotiation & Communication: Excellent negotiation, communication, and collaboration skills, capable of interacting effectively with board members, technical leads, and external partners, • Startup Agility: Ability to thrive in a fast-paced, dynamic startup environment where speed and execution are critical, • Cross-Functional Leadership: Ability to work across cross-functional teams to support complex hardware challenges and recruitment needsCompany Benefits:, • Salary range: $160,000-$250,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is looking for an experienced, highly motivated Director - Mechanical Engineering to join its rapidly growing team. You will have ownership of the mechanical design and development of primary and secondary components and subsystems in the development of Thea Energy’s integrated stellarator fusion systems. You will be responsible for structural and thermomechanical design, manufacturability, development, and commissioning of these components. You will drive requirements definition, design trades, and integration across disciplines. You will build and lead an integrated team drawing from disciplines including mechanical design, structural and stress analysis, thermal/fluids analysis, materials engineering, manufacturing and fabrication engineering, nuclear engineering, and vacuum systems engineering. The Thea Energy team is comprised of driven, creative, and fun individuals passionate about solving complex problems.Key Responsibility Areas: • Own the technical baseline for primary and secondary mechanical fusion systems, including requirements, design, development, analysis, verification, though manufacturing, commissioning, and operation., • Drive system-level trades across relevant performance domains (e.g. thermal, structural, electromagnetic, nuclear, vacuum, cryogenic)., • Maintain accountability for the key performance metrics that define system success., • Define and enforce interface controls., • Work with core system-level development teams to define requirements., • Lead system design and development, addressing the complex 3D non-axisymmetric geometry unique to stellarators., • Drive disciplined design trades balancing performance, manufacturability, and schedule., • Own the analysis campaigns required to demonstrate system feasibility and adequate margin under all operating conditions (normal operation, off-normal events, transients)., • Partner with manufacturing and fabrication engineering to ensure all components can be built, inspected, and assembled within realistic tolerances., • Address stellarator-specific fabrication challenges driven by non-axisymmetric geometry and tight tolerance requirements., • Own the assembly sequence and integration plan for systems within the overall machine build., • Serve as the system-level integrator for system interfaces., • Work with Systems Engineering & Configuration Management to define and maintain interface control documents, requirements flow down, and configuration baselines., • Coordinate across engineering tools to establish CAD/CAE/PLM workflows and simulation infrastructure., • Make scope and schedule trade-offs, escalating risks and decision points with clear technical rationale., • Build, lead, and develop the integrated engineering team, spanning multiple disciplines., • Define work packages, priorities, and deliverables across the team., • Maintain technical risk registers and drive mitigation plans to closure., • Build and maintain a technically rigorous team culture, setting expectations for analysis quality, design rigor, and documentation standards.Ideal Experience & Skillsets:, • 15+ years of experience in mechanical engineering, nuclear engineering, or a closely related field, with significant time spent on large-scale, high-performance hardware systems., • Deep technical knowledge of at least two of the following: structural analysis, thermal-hydraulic analysis, vacuum system design, cryogenic engineering, nuclear engineering, high-heat-flux component design, manufacturing engineering., • Demonstrated experience managing complex, multi-disciplinary hardware development programs from concept through fabrication and test., • Strong understanding of materials behavior and manufacturing processes for demanding mechanical systems., • Proficiency with engineering tools: CAD (NX preferred), FEA (ANSYS preferred), and PLM systems., • Bias toward ownership: you take accountability for outcomes, not just activities., • Ability to make system-level decisions under uncertainty and defend them with engineering rationale., • Effective at leading integrated, multi-disciplinary teams through clarity of scope and technical credibility., • Comfort with ambiguity and pace of a startup building first-of-a-kind hardware., • Strong written and verbal communication: you can present system status, risks, and trades to executives and to the engineering team with equal effectiveness., • Track record of building and leading high-performing technical teams., • Exceptional work ethic and a bias toward action., • Innate desire to learn, innovate, and challenge assumptions, including your own., • At least a bachelor’s degree in mechanical engineering, aerospace engineering, physics, or related fields.Company Benefits:, • Salary range $135,000-$235,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking a Director - Electrical Engineering Systems to lead electrical system design and execution for the Company’s upcoming Eos integrated stellarator. This leader will manage and grow three tightly coupled engineering groups:- Electrical Distribution (facility and plant electrical architecture and integration)- Power Electronics (development of high-power converters and HTS magnet power supplies)- Electronics Systems Engineering (embedded control and instrumentation electronics, including custom PCBAs) This role will own the end-to-end delivery of electrical systems from architecture and requirements through detailed design, prototyping, vendor engagement, test, installation support, and commissioning readiness. The Director will serve as a key cross-functional partner to systems engineering, controls and software, mechanical engineering, safety, and program management, ensuring electrical designs are buildable, testable, safe, and integrated. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. This role will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems. Key Responsibility Areas: • Lead and mentor a multi-disciplinary organization spanning power systems, power electronics, and embedded electronics, including hiring, performance management, career development, and team structure., • Establish engineering operating rhythm: planning, prioritization, technical reviews, staffing plans, and decision-making processes., • Set technical direction and ensure consistent engineering quality across requirements, architecture, implementation, verification, and documentation., • Own the plant-level electrical architecture, including utility interface, substation and distribution design, grounding and protection philosophy, and power quality and reliability strategy., • Guide system modeling and simulation efforts including load flow, short-circuit, and transient studies, and ensure models remain consistent with evolving load envelopes and operating modes., • Lead integration strategy for compensation and storage assets such as STATCOM for load shaping, ride-through capability, and power recovery as applicable., • Own the technical interface to external engineering, procurement, and construction partners and utilities, including technical specifications, design reviews, and factory and site acceptance participation., • Oversee development of high-power converters and magnet power supplies, including topology selection, protection concepts, thermal strategy, and integration with embedded controls., • Develop test strategy and execution: prototype bring-up, staged-load validation, failure mode exploration, parameter tuning, and readiness evidence for integration., • Own hardware architecture for embedded control and instrumentation electronics that interface power conversion hardware, diagnostics, and control firmware., • Lead electromagnetic compatibility and noise mitigation strategy across boards, cabinets, and system integration boundaries., • Partner with systems engineering to translate device requirements into electrical requirements, interface definitions, and verification plans., • Run evidence-based technical gates and design reviews, with clear entry and exit criteria and configuration control., • Own delivery artifacts such as requirements, interface definitions, design packages, test plans, and acceptance evidence to support procurement, installation, and commissioning., • Maintain a strong safety culture including electrical safety, hazard analysis inputs, and design choices that support safe installation and operations., • Provide hands-on leadership in lab and field environments, coordinating with technicians and test teams for build, wiring, installation support, and debug.Ideal Experience & Skillsets:, • Bachelor’s degree or higher in Electrical Engineering or equivalent., • 10 or more years of relevant experience spanning two or more of the following: power systems, substation and distribution, power electronics, embedded electronics, controls hardware, industrial electrical infrastructure., • 5 or more years of engineering management experience leading multi-team organizations, including hiring and performance leadership., • Demonstrated experience owning complex system development from architecture through prototype validation and integration., • Strong foundation in electrical safety, high voltage and high-power engineering practices, and engineering standards and documentation discipline., • Strong cross-functional communication skills and experience driving technical decisions across physics, mechanical, controls software, safety, and program teams., • Experience delivering electrical systems for fusion, accelerator facilities, advanced nuclear, large industrial plants, or other high power research facilities., • Experience with utility interconnection processes, protection coordination, and power quality mitigation., • Experience with battery energy storage systems, static compensators, and dynamic load environments., • Experience establishing verification and validation processes and configuration control for hardware programs., • Familiarity with electromagnetic compatibility practices for high power switching environments and mixed-signal instrumentation., • Power system analysis: ETAP, DIgSILENT PowerFactory, PSCAD, SKM, CYME., • Power electronics simulation and design: PLECS, LTspice, Simulink, Altium or OrCAD., • Electronics design and lab: Altium or OrCAD, oscilloscopes, logic analyzers, power analyzers, electronic loads.Company Benefits:, • Salary range $120,000-$240,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking a Senior Electrical Distribution Systems to lead the design, specification, and integration of the power supplies, power distribution network, grid interface, STATCOM, and energy storage systems for the company’s Eos integrated stellarator. This role combines high-voltage substation and distribution infrastructure design with simulation-driven development of plant-wide energy management strategies. This role will be responsible for defining and validating the full electrical infrastructure, ranging from the high/medium-voltage power supply systems, power generation units, HV/MV utility interconnection, and substation architecture to backup generators and BESS platforms. You will interface with external EPC and utility partners, while driving internal technical requirements, simulations, and review processes across the design, procurement, and commissioning lifecycle. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. This role will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems.Key Responsibility Areas: • Lead the design of the Eos power distribution architecture, including power supply systems, medium and high-voltage distribution, MV switchgear, LV panelboards, and critical backup circuits., • Define grounding, neutral earthing, surge protection, and lightning protection strategies for plant-wide electrical infrastructure., • Evaluate integration of grid interconnection, backup generators, STATCOM, and Battery Energy Storage Systems (BESS) for load balancing, UPS capability, and magnet power recovery., • Run detailed load flow, short-circuit, and transient stability simulations using tools such as ETAP, DIgSILENT PowerFactory, or PSCAD., • Model time-varying load profiles for power supply systems and estimate steady-state vs. transient energy demands., • Contribute to the plant’s overall power management strategy, load shedding philosophy, and power quality targets., • Develop technical specifications, single-line diagrams, protection philosophies, and equipment layouts., • Lead development of technical requirements for external EPC firms responsible for final design, construction, and commissioning., • Participate in design reviews, FAT/SAT, vendor interface, and field verification of electrical systems.Ideal Experience & Skillsets:, • Bachelor’s or Master’s degree in Electrical Engineering, Power Systems, or related field., • 7+ years of experience in power systems engineering, including substation design, grid integration, or industrial distribution infrastructure., • Experience with medium- and high-voltage distribution (up to 230 kV preferred), transformer selection, protective relaying, and electrical safety., • Proficiency in electrical system modeling and simulation tools, such as ETAP, PowerFactory, SKM Power Tools, or PSCAD, • Strong understanding of IEEE, NFPA, IEC standards, grounding calculations, and utility interconnection requirements., • Experience in power systems for fusion devices or accelerators., • Familiarity with BESS systems, UPS, and energy management systems (EMS)., • Experience coordinating with utility providers, EPC contractors, and third-party interconnection consultants., • Understanding of power supply dynamic behavior (e.g. magnet loads, pulsed systems) and interaction with grid stability., • Knowledge of SCADA/EMS integration, protective device coordination, and commissioning procedures., • Simulation & Analysis: ETAP, PowerFactory, PSCAD, SKM, CYME., • CAD & Design Tools: AutoCAD Electrical, EPLAN, Revit MEP., • Exceptional work ethic and communication skills.Company Benefits:, • Salary range $95,000-$160,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking an experienced and highly motivated Supply Chain Manager to join its rapidly growing team. In this role, you will oversee all procurement activities, from requisition to payment. You will collaborate across departments, leading efforts to forecast prototyping spending, optimize procurement processes and manage supplier relationships. This role is critical to ensure that the equipment and supplies required for key company operations arrive on-time and on-budget. Additionally, you will ensure that our supply chain is closely integrated with our FP&A and strategic direction. Your efforts will directly contribute to the organization's efficiency, enabling us to drive forward towards our commercial fusion energy goal. Thea Energy’s dynamic team is made up of self-motivated individuals with an excitement for solving complex problems.Key Responsibility Areas: • Own the procurement process, from requisition to payment, ensuring timely availability of critical equipment, materials, and supplies., • Develop and implement strategic plans to optimize Thea Energy’s procurement processes., • Identify, evaluate, and manage relationships with suppliers/vendors including negotiating contracts to secure the best terms., • Collaborate cross-functionally across engineering, prototyping, and finance teams to forecast demand for equipment and supplies across projects., • Analyze prototyping spending, provide insights and recommendations, and lead initiatives to reduce costs., • Monitor supplier performance and implement corrective actions as necessary to ensure quality, cost, and delivery targets are met., • Assist the finance team with budgeting, forecasting, and financial planning activities., • Fulfil other duties as determined by the Thea Energy’s Finance and Strategy team.Ideal Experience & Skillsets:, • 5+ years of supply chain management experience with a related degree., • Background in supply chain management, procurement, and finance within a hard-tech environment., • A track record of thriving in a fast-paced, dynamic startup environment, with the ability to quickly adapt to changing priorities and take on new challenges., • Advanced proficiency in supply chain management tools and software, Excel and PowerPoint, to support data analysis and reporting., • Ability to work closely across cross-functional teams to forecast demand and ensure seamless integration of supply chain activities into project timelines and FP&A activities., • Demonstrated success in negotiating with and managing a diverse range of suppliers., • Excellent oral, written, and interpersonal communication skills., • Exceptional work ethic., • Strong analytical skills with the ability to make data-driven decisions., • Proven organizational skills with the ability to manage multiple projects and priorities., • Experience in budget management, financial analysis, and supporting finance functions., • Ability to take initiative, work independently and as part of a team., • Ability to occasionally lift objects up to 50 lbs.Company Benefits:, • Salary range $85,000-$150,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking a Director - Control, Instrumentation and Diagnostics (CID) Systems to lead CID system design and execution for the company’s upcoming Eos integrated stellarator. This leader will manage and grow three tightly coupled engineering groups:- Control Systems (Eos control system architecture and integration, including fast data acquisition, PLC automation, Safety and Interlock Systems)- Instrumentation Systems (instrumentation backbone across the facility, including sensors, signal architecture, wiring, grounding, shielding, tagging, and commissioning practices)- Diagnostics Systems (plasma diagnostics control and acquisition, including real time DAQ, timing and synchronization, and low latency data pipelines for plasma control) This role will own the end-to-end delivery of CID systems from architecture and requirements through detailed design, prototyping, vendor engagement, test, installation support, and commissioning readiness. The Director will serve as a key cross-functional partner to systems engineering, controls and software, mechanical engineering, safety, and program management, ensuring electrical designs are buildable, testable, safe, and integrated. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. This role will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems.Key Responsibility Areas: • Lead and mentor a multi-disciplinary organization spanning control systems, instrumentation, diagnostics acquisition, embedded software, and real time integration, including hiring, performance management, career development, and team structure., • Establish engineering operating rhythm: planning, prioritization, technical reviews, staffing plans, and decision-making processes., • Set technical direction and ensure consistent engineering quality across requirements, architecture, implementation, verification, and documentation., • Own the Eos CID architecture, including functional, physical, communications, timing, and data flow boundaries across fast DAQ, supervisory control, PLC automation, safety interlocks, and diagnostics acquisition., • Lead technology selection for real time control, SCADA, networking, timing, and data management, and ensure consistency across integration protocols and data interfaces., • Own the technical interface to external vendors and collaborators providing controls hardware, diagnostics hardware, and instrumentation deliverables, including technical specifications, design reviews, and acceptance participation., • Oversee development and integration of the Eos control system across major subsystems, ensuring deterministic behavior, fault handling, and operational sequencing., • Own Safety and Interlock System philosophy, including safety class logic where required, participation in hazard analyses, and alignment to functional safety practices and standards., • Own instrumentation architecture across the facility: sensor selection, signal types, isolation strategy, signal conditioning, grounding, shielding, and segregation practices for noisy, high power environments., • Oversee diagnostic acquisition architecture end to end, from front end sensors and conditioning through digitizers, FPGA processing, data streaming, and archiving in support of plasma operations and feedback control., • Partner with systems engineering to translate device requirements into CID requirements, interface definitions, and verification plans., • Run evidence based technical gates and design reviews, with clear entry and exit criteria and configuration control., • Own delivery artifacts such as requirements, interface control documents, design packages, test plans, and acceptance evidence to support procurement, installation, and commissioning., • Maintain a strong safety culture including machine protection thinking, hazard analysis inputs, and design choices that support safe installation and operations., • Provide hands on leadership in lab and field environments, coordinating with technicians and test teams for build, wiring, installation support, and debug.Ideal Experience & Skillsets:, • Bachelor’s degree or higher in Electrical Engineering, Controls, Computer Science, Physics, or equivalent., • 10 or more years of relevant experience spanning two or more of the following: integrated control systems, industrial automation, fast data acquisition, instrumentation systems engineering, diagnostics acquisition, real time embedded software., • 5 or more years of engineering management experience leading multi team organizations, including hiring and performance leadership., • Demonstrated experience owning complex system development from architecture through prototype validation and integration., • Strong foundation in safety and high reliability engineering practices, including interlocks, alarms, fail safe design, and disciplined documentation., • Strong cross functional communication skills and experience driving technical decisions across physics, mechanical, electrical, safety, and program teams., • Exceptional work ethic and communication skills., • Experience delivering CID systems for fusion devices, accelerators, advanced nuclear, or other large scientific facilities with tight timing and data fidelity requirements., • Experience with EPICS or TANGO, and industrial integration protocols such as OPC UA, DDS, Modbus, and deterministic timing networks., • Experience with functional safety workflows and standards driven PLC systems engineering., • Experience with FPGA based acquisition and low latency streaming pipelines for real time feedback and machine protection., • Familiarity integrating AI and digital twin capabilities into supervisory control and operations workflows., • Control frameworks and integration: LabView, EPICS, TANGO, OPC UA, DDS, Modbus, TCP IP., • PLC platforms: Siemens TIA Portal, Beckhoff TwinCAT, Allen Bradley, Codesys, IEC 61131 3 practices., • Timing and synchronization: White Rabbit, IEEE 1588 PTP., • Data acquisition and diagnostics: PXIe digitizers, FPGA platforms, event and timestamping frameworks, data streaming infrastructure., • Embedded and middleware software: real time embedded Linux and real time operating systems, C and C++, distributed orchestration tooling., • Instrumentation design and documentation: AutoCAD Electrical, EPLAN, tag databases, input and output lists, cable schedules and loop diagrams.Company Benefits:, • Salary range $120,000-$240,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call.

At Fusion Medical Staffing, our goal is to improve the lives of everyone we touch, and we're always looking for people like you to join our mission. Start your rewarding career as a Travel Physical Therapy Assistant with Fusion Medical Staffing and join our mission to improve lives. Fusion Medical S

Job DescriptionPosition Overview:Thea Energy is seeking for an experienced, organized, and motivated Program Manager. As a Program Manager, you will be responsible for managing the execution of a complex deployment of various fusion systems including an integrated device across design, prototyping, construction, and operational phases. In this role, you will help organize and execute across the lifecycle of new technology deployment of one of the most consequential and cutting-edge technologies of our generation - fusion energy. As a Program Manager, you will establish critical management protocols and procedures to manage risk and deploy the Company’s technology in the most efficient way possible. The Thea Energy team is comprised of self-motivated, innovative, and collaborative individuals with an excitement for solving complex problems. This is a challenging position that requires a high degree of autonomy, and the ideal candidate must be able to move quickly. A proven track record of leading program management, excellent communication skills, and a passion for new technologies and innovation is required. Key Responsibility Areas: • Manage the strategy and execution of first-of-a-kind technologies across design, prototyping, construction, and startup phases, • Coordinate overall program schedules and budgets with Company leadership, engineering and physics teams, and vendors, to execute against programs, • Identify critical path risks and decisions, and enact them into program management, • Continue the development of project management best practices that prioritize efficiency and manage programmatic baselines including WBS, schedule, and cost, • Take full ownership of the risk register and mitigation tracking system, facilitating regular reviews with technical leads to ensure mitigation plans are actively enacted, • Maintain and evolve project scoping and approval processes to ensure all new initiatives are properly vetted, aligned with company milestones before execution, and then enacted, • Work with various teams to establish scope and associated staffing requirements to accomplish projects as the company scales, • Work closely engineering and physics teams to implement various management and documentation protocols capable of tracking risks, decisions, cost, and schedule across development stages, • Manage programs using lean systems designed to provide maximum visibility to leadership with minimum administrative friction, • Develop performance metrics to track program effectiveness and establish a regular reporting structure to communicate progress to staff and the Company' Board, • Establish project controls and planning functions, including the process for establishing schedule baselines and managing changes, • Serve as the central hub between physics, engineering, and finance to ensure technical decisions are mapped to budget and schedule impacts, • Maintain a regular reporting cadence for department updatesIdeal Experience & Skillsets:, • 5+ years of program management experience in a deep-tech or high-growth hardware environment, • Bachelor's degree in a relevant engineering field, • Proven track record of maintaining project governance, approval workflows, and stage-gate processes, and meeting milestones on time and on budget, • Advanced experience in risk management and the active tracking of mitigation lifecycles, • Knowledge of project execution risks and how to manage them effectively, including financial implications, • Experience deploying large and complex first-of-a-kind systems (e.g. fusion, aerospace), • Familiarity with complex hardware systems such as cryogenic, heating, fluid, vacuum, power electronics, and control systems, • Demonstrated ability to manage lean project systems that prioritize big-picture goals over administrative complexity, • Strong communication, collaboration, and interpersonal skills, • Ability to translate strategy into actionable engineering tasks, • Ability to innovate, execute, and flourish in a fast-paced environment, • Experience with schedule development for large projects, including managing variances, strategic planning, and contingencies, • Exceptional work ethic, • Prioritization of safety above all else, • Proficiency in project software including Jira, Wrike, and Microsoft Project, • Team player who is excited to help others and flourish in a high-autonomy work culture, • Ability to occasionally lift objects up to 50 lbs.Company Benefits:, • Salary range $85,000-$145,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking experienced, highly motivated magnet engineers to join its rapidly growing team. The magnet engineering roles will design, build, and test high temperature superconducting (“HTS”) magnets. HTS magnets are foundational components of Thea Energy’s planar coil stellarator, making compact, simpler, and lower-cost fusion systems possible. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. These roles will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems.Key Responsibility Areas: • Rapidly design, build, and test HTS magnets, • Develop specifications for magnets based on system design and performance goals, • Optimize magnet design and run analysis using Multiphysics simulation software (e.g. Ansys EM, Structure, COMSOL, etc.), • Develop design tools, data analysis software, and algorithms using Python or similar, • Incorporate design for manufacturing principles and support first builds, • Produce design specifications and collaborate with vendors to get quotes and deliver hardware that meets qualifications, • Support the implementation of tooling and manufacturing, • Design and execute magnet testing, • Track and report results and progress against program goals and milestones, • Communicate and collaborate with internal and external stakeholdersIdeal Experience & Skillsets:, • Experience with magnets, cryogenics, vacuum systems, or transformer design, • Experience in design using CAD software (e.g. Solidworks, CATIA, NX, etc.), • Experience with Ansys and/or COMSOL, • Experience specifying machining, welding, and fabrication requirements, • Ability to work through and solve highly multidisciplinary engineering problems, • Ability to take initiative, work independently and as part of a team, • Ability to execute and flourish in a fast-paced, rapidly changing environment, • Comfortable working to aggressive deadlines, • Exceptional work ethic, • Strong team member with clear communication and collaboration skills, • Innate desire to learn, innovate, and critique ideas including one’s own, • At least a bachelor’s degree in physics, computer science, electrical engineering, mechanical engineering, materials engineering, or related fields, • Experience with magnetic confinement fusion, aerospace, medical devices, or other highly technical industries is idealCompany Benefits:, • Salary range $85,000-$150,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is looking for an experienced computer graphics and visualization engineer to bringing our systems to life so the world can visualize and understand our fusion systems. You will report directly to Thea Energy leadership and engineering teams to develop the CAD models and graphics that will be turned into a reality in the near term. This role requires deep technical skills, unparalleled vision for a fusion energy future, and a speed & execution mindset coupled with extreme attention to detail. The Thea Energy team is comprised of driven, creative, and fun individuals passionate about solving complex problems.Key Responsibility Areas: • Define and execute a vision for commercial fusion energy via visual storytelling, • Produce complex CAD designs from first principals, • Develop photorealistic renders and videos of Thea Energy’s fusion technologies, • Create various forms of media across presentations, websites, videos, and other physical formats, • Collaborate with world-leading experts to ground visualizations by rigorous scientific and engineering standards, • Communicate and collaborate with internal and external stakeholdersIdeal Experience & Skillsets:, • 5+ years of relevant work experience in hardware-focused CAD modeling and graphics, • Ability to design complex hardware and machinery that does not yet exist - with an ability to take ideas through to building models and visualizations, • Expertise in NX, 3DS Max, or other industry standard CAD programs, • Expertise in industry leading graphics visualization programs, • Excellent oral and interpersonal communication skills, • Ability to execute and flourish in a fast-paced, rapidly changing environment, • Comfortable working to aggressive deadlines, • Exceptional work ethic, • Strong team member with clear communication and collaboration skillsCompany Benefits:, • Salary range $85,000-$175,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options

Start your rewarding career as a Travel Physical Therapy Assistant with Fusion Medical Staffing and join our mission to improve lives. Fusion Medical Staffing is seeking a skilled Physical Therapy Assistant (PTA) for a 13-week travel assignment in Livingston, New Jersey. At Fusion Medical Staffing,

Competitive compensation packages and opportunities to learn new skills are among some of the perks being a medical traveler with Fusion Medical Staffing. Fusion Medical Staffing-Therapy is seeking a travel Physical Therapist for a travel job in West Orange, New Jersey. With a mission to improve the

Travel Physical Therapy Assistant (PTA) Fusion Medical Staffing Facility in Livingston, New Jersey Fusion Medical Staffing is seeking a skilled Physical Therapy Assistant (PTA) for a 13-week travel assignment in Livingston, New Jersey. Sensory - Must possess visual acuity and ability to effectively

Competitive compensation packages and opportunities to learn new skills are among some of the perks being a medical traveler with Fusion Medical Staffing. At Fusion Medical Staffing, our goal is to improve the lives of everyone we touch, and we're always looking for people like you to join our missi

At Fusion Medical Staffing, our goal is to improve the lives of everyone we touch, and we're always looking for people like you to join our mission. Start your rewarding career as a Travel House Supervisor RN with Fusion Medical Staffing and join our mission to improve lives. Fusion Medical Staffing

Competitive compensation packages and opportunities to learn new skills are among some of the perks being a medical traveler with Fusion Medical Staffing. Fusion Medical Staffing is seeking a skilled Physical Therapist for a 13-week travel assignment in Florham Park, New Jersey. About Fusion Medical

Start your rewarding career as a Travel Pediatric RN with Fusion Medical Staffing and join our mission to improve lives. Fusion Medical Staffing is seeking a skilled Pediatric RN for a 13-week travel assignment in Newark, New Jersey. At Fusion Medical Staffing, our goal is to improve the lives of ev

Competitive compensation packages and opportunities to learn new skills are among some of the perks being a medical traveler with Fusion Medical Staffing. Fusion Medical Staffing is seeking a skilled Physical Therapist for a 272-week travel assignment in Scotch Plains, New Jersey. At Fusion Medical

Fusion Medical Staffing is seeking a skilled Physical Therapy Assistant (PTA) for a 13-week travel assignment in Livingston, New Jersey. At Fusion Medical Staffing, our goal is to improve the lives of everyone we touch, and we're always looking for people like you to join our mission. Start your rew

Competitive compensation packages and opportunities to learn new skills are among some of the perks being a medical traveler with Fusion Medical Staffing. Fusion Medical Staffing-Cardio is seeking a travel Nuclear Medicine Technologist for a travel job in Plainfield, New Jersey. Fusion Medical Staff

At Fusion Medical Staffing, our goal is to improve the lives of everyone we touch, and we're always looking for people like you to join our mission. Start your rewarding career as a Travel CVICU RN with Fusion Medical Staffing and join our mission to improve lives. Fusion Medical Staffing is seeking

Fusion Medical Staffing is seeking a skilled Hospice RN for a 13-week travel assignment in Parsippany, New Jersey. At Fusion Medical Staffing, our goal is to improve the lives of everyone we touch, and we're always looking for people like you to join our mission. Start your rewarding career as a Tra

At Fusion Medical Staffing, our goal is to improve the lives of everyone we touch, and we're always looking for people like you to join our mission. Start your rewarding career as a Travel PICU RN with Fusion Medical Staffing and join our mission to improve lives. Fusion Medical Staffing is seeking

Travel Physical Therapy Assistant (PTA) Fusion Medical Staffing Facility in Livingston, New Jersey Fusion Medical Staffing is seeking a skilled Physical Therapy Assistant (PTA) for a 13-week travel assignment in Livingston, New Jersey. Sensory - Must possess visual acuity and ability to effectively

At Fusion Medical Staffing, our goal is to improve the lives of everyone we touch, and we're always looking for people like you to join our mission. Start your rewarding career as a Travel Physical Therapist (PT) with Fusion Medical Staffing and join our mission to improve lives. Fusion Medical Staf

Fusion Medical Staffing provides career opportunities to healthcare professionals by helping medical facilities fill their staffing needs. Fusion Medical Staffing is seeking a skilled Cardiac Cath Lab RN for a 8-week travel assignment in Passaic, New Jersey. At Fusion Medical Staffing, our goal is t

Start your rewarding career as a Travel Hospice RN with Fusion Medical Staffing and join our mission to improve lives. Fusion Medical Staffing is seeking a skilled Hospice RN for a 13-week travel assignment in Parsippany, New Jersey. At Fusion Medical Staffing, our goal is to improve the lives of ev

Fusion Medical Staffing is seeking an experienced Medical Surgical Registered Nurse for an exciting Travel Nursing job in New York, NY. Fusion Medical Staffing provides career opportunities to healthcare professionals by helping medical facilities fill their staffing needs. At Fusion Medical Staffin

At Fusion Medical Staffing, our goal is to improve the lives of everyone we touch, and we're always looking for people like you to join our mission. Start your rewarding career as a Travel Nuclear Medicine Tech with Fusion Medical Staffing and join our mission to improve lives. Fusion Medical Staffi

At Fusion Medical Staffing, our goal is to improve the lives of everyone we touch, and we're always looking for people like you to join our mission. Start your rewarding career as a Travel Operating Room RN with Fusion Medical Staffing and join our mission to improve lives. Fusion Medical Staffing i

At Fusion Medical Staffing, our goal is to improve the lives of everyone we touch, and we're always looking for people like you to join our mission. Start your rewarding career as a Travel Med Surg RN with Fusion Medical Staffing and join our mission to improve lives. Fusion Medical Staffing is seek

Fusion Medical Staffing is seeking a skilled High Risk OB Ultrasound Tech for a 8 week travel assignment in Montclair, New Jersey. At Fusion Medical Staffing, our goal is to improve the lives of everyone we touch, and we're always looking for people like you to join our mission. Start your rewarding

Fusion Medical Staffing is seeking a skilled Surgical Technologist for a 13-week travel assignment in Montclair, New Jersey. At Fusion Medical Staffing, our goal is to improve the lives of everyone we touch, and we're always looking for people like you to join our mission. Start your rewarding caree

At Fusion Medical Staffing, our goal is to improve the lives of everyone we touch, and we're always looking for people like you to join our mission. Start your rewarding career as a Travel Operating Room RN with Fusion Medical Staffing and join our mission to improve lives. Fusion Medical Staffing i

Fusion Medical Staffing is seeking a skilled Hospice RN for a 13-week travel assignment in Parsippany, New Jersey. At Fusion Medical Staffing, our goal is to improve the lives of everyone we touch, and we're always looking for people like you to join our mission. Start your rewarding career as a Tra

Fusion Medical Staffing is seeking a CVICU RN for a 13-week travel assignment in Jersey City, New Jersey. At Fusion Medical Staffing, our goal is to improve the lives of everyone we touch, and we're always looking for people like you to join our mission. Start your rewarding career as a Travel CVICU

Start your rewarding career as a Travel High-Risk OB Ultrasound Technologist with Fusion Medical Staffing and join our mission to improve lives. Company: Fusion Medical Staffing. Fusion Medical Staffing is seeking a skilled High Risk OB Ultrasound Tech for a 8 week travel assignment in Montclair, Ne

Start your rewarding career as a Travel Physical Therapist (PT) with Fusion Medical Staffing and join our mission to improve lives. Fusion Medical Staffing is seeking a skilled Physical Therapist for a 13-week travel assignment in Florham Park, New Jersey. At Fusion Medical Staffing, our goal is to