Lab manager jobs in New Brunswick, New JerseyCreate job alerts

Job Description Job Description Date 10/2025 Location 22 Van Dyke Avenue, New Brunswick NJ 08901 / 1300 Airport Road, North Brunswick NJ 08902 Title Operator, Dispensing Department Dispensing Reports to Manager, Dispensing FLSA (Exempt or Non-Exempt) Non-Exempt Role Overview The Dispensing Operator will perform all functions related to dispensing of material, receipt of goods, put-away material into warehouse aisles, pull out material per Batch card/Pick ticket, put back to same location from where it was pulled for batches, manual order processing, order auditing, shipment preparation, pallet building, transferring material from wood to plastic pallets, and cycle counting inventory. All functions may require the use of powered industrial trucks, Syspro or RF as needed. Will need to work in temperature-controlled areas. Areas of Responsibility Level 1: Dispensing Operator Overview: This is a training-level role for individuals with limited or no prior experience in pharmaceutical dispensing. Works under close supervision while learning company SOPs, GMP standards, and equipment operations. Key Responsibilities: • Assist in pulling and weighing raw materials under supervision., • Learn to read and interpret batch cards and pick slips., • Calibrate scales before use., • Cleans room after batch is complete, • Ensures safety and quality standards are consistently followed., • Maintain basic cleanliness of work area and equipment., • Support warehouse duties such as material receipt and basic inventory handling., • Follow safety procedures and learn PPE protocols., • Operate pallet jacks or assist with forklift activities (if certified). Level 2: Dispensing Operator Overview: This level is for operators with hands-on experience in pharmaceutical or supplement dispensing. Operators are responsible for completing batch-related activities with minimal supervision and maintaining documentation compliance. Key Responsibilities: • Dispense raw materials independently per batch cards., • Reviews batch card. Determine material to be used in the batch. Pull out material per requirement and enter in logbooks., • Performs requests received from other departments such as R&D, Production, QA or Purchasing etc., • Cleans room after batch is complete, • Ensures safety and quality standards are consistently followed., • Weigh materials accurately and calibrate scales before use., • Use Syspro or RF systems for inventory control., • Handle, put-away, return, and transfer of goods between warehouse locations., • Perform manual order processing, auditing, and preparation for shipments., • Maintain gowning and hygiene protocols in controlled environments., • Ensure accurate documentation in logs and batch records. Level 3: Dispensing Operator Overview: A highly experienced operator who may act as a team lead or trainer. Oversees batch dispensing activities, ensures compliance, and supports continuous improvement initiatives. Key Responsibilities: • Lead batch dispensing operations; verify materials and documentation., • Train and mentor entry and intermediate-level operators., • Collaborate with cross-functional teams (QA, R&D, Production)., • Reviews batch card. Determine material to be used in the batch. Pull out material per requirement and enter in logbooks., • Performs requests received from other departments such as R&D, Production, QA or Purchasing etc., • Cleans room after batch is complete, • Ensures safety and quality standards are consistently followed., • Conduct cycle counts and helps manage inventory accuracy., • Troubleshoot equipment or material issues; escalate when necessary., • Lead compliance audits for dispensing areas., • Support continuous improvement, safety, and 5S initiatives. Physical & Environmental Requirements (All Levels): • Able to lift 55 lbs regularly; occasionally up to 75 lbs., • Stand/walk for 6+ hours per shift., • Work in temperature-controlled rooms with PPE (lab coat, gloves, face mask, respirator, etc.)., • Exposure to dust, noise, and cleaning agents. Bottom of Form Requirements Education & Qualification: Level 1: Dispensing Operator • High school diploma or GED., • 0–1 year of experience in manufacturing or warehouse setting., • Basic math and English reading skills., • Willingness to learn cGMP, OSHA, and SOPs. Level 2: Dispensing Operator • High school diploma or GED., • 2+ years of experience in a pharmaceutical production environment., • Forklift operation experience (certification preferred)., • Familiarity with cGMP and SOP documentation standards., • Attention to detail and ability to troubleshoot basic dispensing issues. Level 3: Dispensing Operator Requirements: • High school diploma or GED; technical certification a plus., • 4+ years of dispensing experience in a GMP-regulated and within a pharmaceutical production environment, • Strong understanding of regulatory compliance (FDA, GMP, OSHA)., • Proven ability to lead teams and communicate effectively., • Proficient in inventory software (Syspro or similar ERP systems)., • Additional experience in granulation, compression, or blending is a strong plus. Certifications, Licenses, Credentials: • Prior certification to operate a sit-down forklift is a plus. Skills & Ability • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards, etc., • Mechanically inclined to understand the inner workings of the equipment., • Demonstrates the ability to read and write basic English to be able to understand the industry-regulated instruction sheets., • Must have attention to detail. Physical Requirements (lifting, etc.): • Ability to lift up to 55 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift, • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment., • Must be able to wear all PPE including a lab coat, face mask, booties, gloves, safety glasses/goggles, and respirators. Work Environment (Office, Warehouse, temperature extremes, etc.): • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment 1st shift - 7:00 am to 3:30 pm

Prime Staffing is seeking a travel nurse RN Hematology / Oncology for a travel nursing job in New Brunswick, New Jersey. Job Description & Requirements • Specialty: Hematology / Oncology, • Discipline: RN, • Start Date: 06/29/2026, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, • Employment Type: Travel ID: 63548685 Shift: Day 4x10-Hour (07:30 - 18:30) Description: Oncology Clinic RN...Shift Time: 7:30a-6:30p; 4x10s...Weekend Requirements: No weekends or holidays...Years of experience required: 1 year of outpatient oncology experience is required...Certifications Required: BLS...Patient/Skill Requirements: Oncology exp is required. Will clinicians float? Will float among clinics. Nurses are partnered with a specific tumor group that sees patients for exams on specific days of the week Charting System: EPIC...Are First-time travelers accepted? Yes...Scrub color: Business casual, scrubs are okay Modified Time:6/29/2026 12:00:00 AM Account Manager: Matthew Chausse Account Manager Email: COVID-19 Vaccine: Not Required Flu Vaccine: Unknown Submittals:Low Job Requirements & Qualifications Previous Charge Experience : Preferred Years of Experience : 1 Patient Ratio Experience : Charting System Experience : Preferred Charting System Name : Community Hospital Experience : - LTAC Experience : - Trauma Level I Experience : - Trauma Level II Experience : - Travel Experience Required : - Certifications : BLS, OCNSkills : Accessing/Managing Ports, Administration of chemotherapy, Advanced directives, BMT, Care and management of ports, Central line blood draw, Central Line/Implanted Line Care, Hospice care, Isolation Precautions/PPE, Leukemia/Blood Dyscrasias, Lymphoma/Non-Hodgkins lymphoma, Monitoring Chemotherapy, Multiple Myeloma, Neutropenic precautions, Oral Administration of chemotherapy, Outpatient oncology, Patient/Family education and support, Recognize/ communicate abnormal lab values, Stem cell therapies* Unit Details Staffing & Scheduling Scheduling Type : - Patient Ratios Days : - Patient Ratios Nights : - Patient Ratios Weekends : - Float Required : Will float among clinics. Nurses are partnered with a specific tumor group that sees patients for exams specific days of the week Call Required : - Weekend Coverage : - Number of Weekend Shifts Per Contract : - Pre-Approved Time Off : - Orientation Hours : - Facility & Patient Care Details Patient Age Groups : Adults Daily Census : - Number of Visits Per Day : - Number of Rooms : - Number of Beds : - Additional Unit Information Interdisciplinary Support : - Patient Diagnoses : Patient Mix/Skill Requirements: Oncology exp required, ambulatory care preferred Special Procedures/Unit Details : - Special Equipment : - #Tier3 Travel Compliance Required Information : SSN DOB Submission Requirements : Requested Time Off : A screenshot of the candidate confirming their RTO schedule requests is required upon submission. These submissions will be prioritized. Requests with less than 7 days of RTO , and no Holiday time off , will be prioritized. RTO requested after an offer will NOT be accommodated. Clinicians are expected to adhere to the agreed-upon schedule and should NOT request changes once onsite. Must be available to work 2 of 3 Holidays (unless otherwise specified in job description) Block/Special Scheduling : Schedule requests cannot be accommodated unless approved at time of booking. Contract at RWJ is expected to be travelers primary work schedule. If traveler is working elsewhere, RWJ is NOT required to accommodate unless approved prior to offer. Return Staff Policy : RWJBH staff (full time or PRN) must be gone from the RWJBH health system a minimum of 1 year before they are eligible to return for travel assignments. Floating Requirements/Ratios: Candidates are required to float within their skillset, no exceptions. Ratios vary based on census and staffing. When floated, RNs will be assigned a patient ratio based on patient acuity License/Certifications: Active NJ or Compact license is required at time of submission. All certifications required at time of submission unless otherwise specified. Please indicate upon submission if traveler will acquire certificate prior to start date. Submissions: Maximum of 3 submissions per candidate per facility Local Rules : Locals accepted at the same rate. Background Policy : Open/active BG hits and/or License Hits NOT accepted. Compliance : Labs MUST be completed 48 hours of signing. Valid NJ State License or Compact License required for nursing, at time of submission. Failing competency exams require a 6-month break before clinician can re-submit. Certifications are required at time of submission unless otherwise specified and can be obtained prior to start. Please refer to the unit description References required. Any international work history or permanent residency MUST be disclosed. ED/Behavioral Health/Psychiatric RNs MUST complete de-escalation training within 14 days of their start date. Recruiters: RNs must pay $52 plus tax for the course, this fee should be added to the margin Each traveler receives 1 certificate per module (3 total), 1 overall course certificate Modules : Modules are non-billable, 4 hours of EPIC training and up to 18 hours of additional hours RN: average 18 hours of non-billable modules Allied: average 1 hour of non-billable modules Modules are completed pre-start, and annually Modules are recorded by transcripts for onsite specific modules. RWJBH annuals, Baxter pump, and signed attestations are self-reported, and EPIC training is facility reported Cancellations/Attendance Policies: Should a traveler need to cancel their contract for any reason, RWJBH asks for adequate notice, defined as: MSP contracted travelers: 14-day notice CRISIS / RAPID contracted travelers: 10-day notice Clinicians are required to make up any missed shifts within the same pay period. Submittal Details: #Tier3 Travel ComplianceRequired Information:SSNDOBSubmission Requirements:Requested Time Off:A screenshot of the candidate confirming their RTO & schedule requests is required upon submission. These submissions will be prioritized.Requests with less than 7 days of RTO, and no Holiday time off, will be prioritized.RTO requested after an offer will NOT be accommodated. Clinicians are expected to adhere to the agreed-upon schedule and should NOT request changes once onsite.Must be available to work 2 of 3 Holidays (unless otherwise specified in job description)Block/Special Scheduling:Schedule requests cannot be accommodated unless approved at time of booking.Contract at RWJ is expected to be travelers primary work schedule. If traveler is working elsewhere, RWJ is NOT required to accommodate unless approved prior to offer.Return Staff Policy:RWJBH staff (full time or PRN) must be gone from the RWJBH health system a minimum of 1 year before they are eligible to return for travel assignments.Floating Requirements/Ratios:Candidates are required to float within their skillset, no exceptions.Ratios vary based on census and staffing. When floated, RNs will be assigned a patient ratio based on patient acuityLicense/Certifications:Active NJ or Compact license is required at time of submission.All certifications required at time of submission unless otherwise specified. Please indicate upon submission if traveler will acquire certificate prior to start date. Submissions: Maximum of 3 submissions per candidate per facilityLocal Rules: Locals accepted at the same rate.Background Policy: Open/active BG hits and/or License Hits NOT accepted. Compliance:Labs MUST be completed 48 hours of signing.Valid NJ State License or Compact License required for nursing, at time of submission.Failing competency exams require a 6-month break before clinician can re-submit.Certifications are required at time of submission unless otherwise specified and can be obtained prior to start. Please refer to the unit description References required.Any international work history or permanent residency MUST be disclosed.ED/Behavioral Health/Psychiatric RNs MUST complete de-escalation training within 14 days of their start date.Recruiters: RNs must pay $52 plus tax for the course, this fee should be added to the marginEach traveler receives 1 certificate per module (3 total), 1 overall course certificateModules:Modules are non-billable, 4 hours of EPIC training and up to 18 hours of additional hoursRN: average 18 hours of non-billable modulesAllied: average 1 hour of non-billable modulesModules are completed pre-start, and annuallyModules are recorded by transcripts for onsite specific modules. RWJBH annuals, Baxter pump, and signed attestations are self-reported, and EPIC training is facility reportedCancellations/Attendance Policies:Should a traveler need to cancel their contract for any reason, RWJBH asks for adequate notice, defined as:MSP contracted travelers: 14-day noticeCRISIS / RAPID contracted travelers: 10-day noticeClinicians are required to make up any missed shifts within the same pay period. Guaranteed Hours: Contract Weeks:91 Prime Staffing Job ID #37100838. Pay package is based on 8 hour shifts and 40.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: RN:Ambulatory,08:00:00-16:00:00 About Prime Staffing At Prime Staffing, we understand the importance of finding the perfect fit for both our clients and candidates. Prime Staffing utilizes a unique matchmaking approach, providing the most qualified contingent staffing to our clients, and the most competitive contracts to our workforce. Our experienced team takes the time to get to know both our clients and candidates, their needs, and preferences, to ensure that each placement is a success. We offer a wide range of staffing services including temporary, temp-to-perm, and direct hire placements. Our extensive network of qualified candidates includes nurses, allied healthcare professionals, corporate support professionals and executives.

Job Description Job Description Date 06/2025 Location 1300 Airport Road – Van Dyke Title Operator, Forklift Department Operations Reports to Manager, Warehouse FLSA (Exempt or Non-Exempt) Non-Exempt Role Overview The Forklift driver will perform all functions related to receipt of goods, put-away into warehouse, replenishment of pick areas, manual order processing, order auditing, shipment preparation, pallet building, truck loading and cycle counting inventory. All functions may require use of powered industrial trucks, SAP or RF as needed. Areas of Responsibility • Receives product from domestic and overseas vendors, transfers, customer returns, refused shipments, and non-inventory support products., • Accurately audits and verifies all incoming quantities for entry into computerized inventory., • Performs on and off-site warehousing duties to include: the initial movement of materials to appropriate locations, effective space utilization, and material retrieval delivery, using powered industrial equipment as needed., • Performs order fulfillment duties to include: reviewing and prioritizing available orders, determining stock requirements and maintaining levels of required inventory, physically picking and packing orders, auditing and verifying picked orders, preparing completed orders for shipping, using SAP and RF as needed., • Performs shipping duties to include: Locating pallets to the dock, performing dock audits, verifying driver information, loading shipments on to trucks, properly filling out and signing BOL, tracking shipments, using SAP and RF as needed., • Ensures safety and quality standards are consistently followed., • Performs sortation duties to include: lifting cartons at sortation, palletizing cartons, printing pallet tickets, moving freight to the dock, using SAP and RF as needed., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Handles start up and shut down duties pertaining to equipment at the beginning and end of each shift., • Maintains proper gowning and hygiene to ensure integrity of the product as per company policies., • Works extended hours and occasional weekend overtime., • Works in a safe and responsible manner in order to create an injury-free and incident-free workplace. Complies with all job-related safety and other training requirements., • Other duties as assigned Requirements Education & Qualification: • High school graduate or GED equivalent, • 2+ years in distribution/warehousing, • Minimum of one (2) year work experience in nutritional’s, supplements, food or pharmaceutical manufacturing industries, • Valid driver’s license Certifications, Licenses, Credentials: • N/A Skills & Ability • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards etc., • Mechanically inclined to understand inner workings of equipment., • Demonstrates the ability to read and write basic English in order to be able to understand the industry regulated instruction sheets., • Prior experience driving sit-down and stand-up PITs and ticketing experience helpful, • Must pass forklift certification process (both written and driving tests) Physical Requirements (lifting, etc.): • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on production floor a minimum of 6 hours per shift, • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment., • Must be able wear all PPE including lab coat, face mask, booties, gloves, safety glasses/goggles and respirators. Work Environment (Office, Warehouse, temperature extremes, etc.): • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employee can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. 1st shift 8:30 am to 5:00 pm 9:00 am to 5:30 pm 9:30 am to 6:00 pm

What if the next project you run is the one that takes a breakthrough material from the lab to the factory floor, at the scale that makes it real? This is the senior project manager who turns a first-to-market technology into product across a fast-growing manufacturing network. 𝗖𝗢𝗠𝗣𝗔𝗡𝗬 Pave Talent is hiring on behalf of our client, a publicly traded global manufacturer of specialty chemicals and advanced electronic materials, with more than $2.5 billion in annual revenue and operations in over 50 countries. Inside that established company sits a fast-moving, startup-style division built around a breakthrough materials platform that powers the AI, electric-vehicle, datacenter, and semiconductor boom, backed by a capital program of more than $150 million to scale it across multiple new plants. 𝗖𝗔𝗥𝗘𝗘𝗥 𝗔𝗖𝗖𝗘𝗟𝗘𝗥𝗔𝗧𝗜𝗢𝗡 This is a high-visibility seat reporting into global engineering project leadership. You personally own the most business-critical builds, not a slice of someone else's program, and your work lands in front of senior leadership and shapes financial commitments. You get the scope and pace of a startup with the resources of an established, multi-billion-dollar company behind you. 𝗪𝗛𝗬 𝗧𝗛𝗜𝗦 𝗥𝗢𝗟𝗘 𝗘𝗫𝗜𝗦𝗧𝗦 The company is racing to be first to market with a material that conducts electricity and manages heat better than the standard, and demand is being pulled by the biggest names in computing. Turning that material into product at scale takes disciplined project management across chemical production scale-ups, technology development, systems engineering, and the capital projects that build the plants. That is your mandate. 𝗪𝗛𝗬 𝗠𝗔𝗞𝗘 𝗧𝗛𝗘 𝗠𝗢𝗩𝗘 You are good at running projects. At a large, settled company you may wait years for a program this visible, with this much financial weight and this much room to set how it gets done. Here you step straight into the high-priority builds, influence across engineering, operations, and R&D, and see your impact in weeks, not quarters. If you have been waiting for a build-it-now mandate with real backing, this is it. 𝗧𝗛𝗘 𝗢𝗣𝗣𝗢𝗥𝗧𝗨𝗡𝗜𝗧𝗬 You lead high-priority engineering initiatives end to end, from scoping and planning through execution, partnering across Engineering, Operations, Continuous Improvement, Product Management, and R&D worldwide. You report into global engineering project leadership and operate as the person accountable for delivering the builds that matter most, including the productization and manufacturing scale-up of the platform. 𝗪𝗛𝗔𝗧 𝗬𝗢𝗨 𝗪𝗜𝗟𝗟 𝗗𝗥𝗜𝗩𝗘 • Lead the scoping, planning, and execution of high-priority engineering projects centered on productization and manufacturing scale-up, • Build project plans, timelines, budgets, and resource strategies tied to business priorities and customer commitments, • Drive cross-functional execution across Engineering, Operations, Continuous Improvement, Product Management, and R&D globally, • Manage risk early with proactive mitigation and contingency plans, • Give senior leadership clear reporting and insight to support key business and financial decisions, • Facilitate cross-functional meetings, clear bottlenecks, and keep teams aligned, • Improve the project-management processes, tools, and portfolio tracking the function runs on, • Contribute directly to initiatives that move revenue, cost, and operational efficiency 𝗧𝗛𝗘 𝗥𝗘𝗔𝗟 𝗧𝗔𝗟𝗞 This is a fast, high-pressure, high-visibility seat with real financial stakes. You will juggle competing priorities and ambiguity under a leadership push to be first to market, influence teams you do not directly manage, and make fast calls with incomplete information. If you want a settled program with fixed scope and a predictable week, this is not it. If you want to build and deliver under real urgency, you will thrive. 𝗪𝗛𝗔𝗧 𝗬𝗢𝗨 𝗕𝗥𝗜𝗡𝗚 𝗥𝗲𝗾𝘂𝗶𝗿𝗲𝗱: • Strong project-management track record running multiple complex engineering projects at once, ideally including factory startups, scale-up, or capital projects, • Ability to influence, align, and drive accountability across cross-functional teams without direct authority, • Advanced risk assessment, mitigation planning, and decision-making under pressure, • Solid grasp of engineering processes, manufacturing, and technical roadmaps, • Comfort connecting day-to-day execution to business objectives and financial outcomes 𝗕𝗼𝗻𝘂𝘀 𝗣𝗼𝗶𝗻𝘁𝘀: • Background in specialty chemicals, advanced materials, semiconductor, or electronics manufacturing, • Experience standing up PM processes, tools, or portfolio tracking from scratch, • PMP (Project Management Professional) certification, beneficial, not required 𝗖𝗢𝗠𝗣𝗘𝗡𝗦𝗔𝗧𝗜𝗢𝗡 𝗔𝗡𝗗 𝗕𝗘𝗡𝗘𝗙𝗜𝗧𝗦 𝗕𝗮𝘀𝗲 𝗦𝗮𝗹𝗮𝗿𝘆: $109,000 to $164,000 𝗕𝗼𝗻𝘂𝘀: annual performance bonus on top of base 𝗕𝗲𝗻𝗲𝗳𝗶𝘁𝘀: strong 401(k) match plus an additional company contribution, an employee stock purchase plan, medical with an employer health savings account (HSA) contribution, company-paid life and disability, and generous paid time off 𝗟𝗼𝗰𝗮𝘁𝗶𝗼𝗻: on-site at the company's Piscataway, New Jersey engineering center, within commuting range of central and northern New Jersey and the greater New York metro Apply via LinkedIn and we will reach out to schedule a conversation. Confidential search; your application is fully private. 𝗣𝗮𝘃𝗲 𝗧𝗮𝗹𝗲𝗻𝘁 | 𝗛𝗶𝗿𝗶𝗻𝗴 𝗥𝗲𝗶𝗺𝗮𝗴𝗶𝗻𝗲𝗱

Job Title: Quality Control (QC) Manager Industry: Nutraceuticals / Dietary Supplements (CDMO) Location: New Brunswick, NJ Job Summary The Quality Control (QC) Manager is responsible for overseeing all laboratory and quality control functions within a dietary supplement CDMO environment. This role ensures that raw materials, in-process samples, and finished products meet established specifications and comply with regulatory requirements including FDA 21 CFR Part 111 and cGMP standards. The QC Manager will lead laboratory operations, manage a team of analysts, and support timely product release while maintaining the highest standards of quality, safety, and data integrity. Responsibilities • Oversee testing of raw materials , in – process samples and finished products ., • Ensure compliance with product specifications and release criteria, • Review and approve Certificates of Analysis (COAs), • Manage sampling plans, test schedules, and batch release timelines, • Supervise day-to-day QC laboratory operations (chemical and microbiological testing), • Ensure proper calibration, maintenance, and operation of analytical instruments (HPLC, GC,, • UV-Vis, etc.), • Maintain laboratory SOPs, test methods, and documentation, • Support internal, customer, and regulatory audits, • Maintain audit readiness and address observations, • Lead investigations for OOS (Out-of-Specification) and OOT (Out-of-Trend) results, • Lead, train, and mentor QC analysts and lab personnel, • Manage team performance, hiring, and development, • Promote a strong quality and compliance culture, • Partner with QA, Manufacturing, R&D, and Supply Chain teams, • Support product development, scale-up, and tech transfer activities, • Drive improvements in lab efficiency, turnaround time, and cost optimization Qualifications • Bachelor’s or Master’s degree in Chemistry, Biochemistry, Microbiology, Food Science, or, • related field, • 5+ years of experience in Quality Control within dietary supplements and nutraceuticals., • Experience in a CDMO or contract manufacturing environment preferred, • Hands-on experience with analytical techniques such as HPLC, GC, UV-Vis (ICP-MS is a plus), • Strong knowledge of microbiological testing methods, • Experience with method validation and stability studies, • Ability to work in a fast-paced, multi-client CDMO environment, • Effective communication and stakeholder management

Job Description Job Description Date 10/2025 Location 1300 Airport Road, North Brunswick NJ Title Mechanic, Maintenance (PKG.) Department Facilities / Engineering Reports to Manager, Maintenance FLSA (Exempt or Non-Exempt) Non -Exempt Role Overview The Packaging Mechanic is responsible for operating, maintaining, troubleshooting, and repairing packaging lines and auxiliary equipment (e.g. fillers, cappers, labelers, cartoners, sealers, conveyors, etc.). On higher levels, the role involves preventive maintenance, changeovers, and acting as a technical leader on the packaging floor. Areas of Responsibility Level 1 – Mechanic, Maintenance (PKG.) Mechanic supports routine maintenance, equipment cleaning, basic setup, basic troubleshooting, and minor repairs under supervision. Ideal for those newer to packaging maintenance, this role focuses on learning and executing tasks safely and accurately. Operates under close supervision, handling routine maintenance tasks such as cleaning, basic setups, and minor repairs. Escalates complex issues to higher-level technicians. Key Responsibilities: • Assist with setup, changeovers, cleaning, and basic operation of packaging lines., • Load materials (labels, cartons, films) into packaging equipment., • Perform basic visual inspections, detect packaging defects, and remove faulty units., • Assist in daily cleaning, line sanitation, and housekeeping., • Follow standard operating procedures (SOPs), batch records, and safety protocols., • Document basic packaging metrics, logs, and shift records., • Escalate technical issues to higher‑level technicians., • Assist in minor mechanical adjustments (e.g. tightening bolts, replacing belts) under supervision., • Participate in safety and quality training. Level 2 – Mechanic, Maintenance (PKG.) Mechanic requires the ability to independently perform equipment maintenance, moderate troubleshooting, perform machine change overs and setup and perform limited repairs . Employees at this level work with moderate supervision, frequently exercising independent judgment. They apply solid mechanical and electrical skills to set up, repair, troubleshoot, and maintain equipment. They are expected to analyze problems, propose solutions, and take ownership of more complex tasks. Key Responsibilities: • Independently perform maintenance, troubleshooting, and repair on packaging lines including blister, bottle, cartoning, and label printing systems., • Diagnose mechanical, electrical, pneumatic, and control system issues (motors, drives, sensors, solenoids, PLC I/O) on packaging equipment., • Execute changeovers and line reconfigurations, calibrations, and adjustments for product format changes., • Perform preventive maintenance and predictive maintenance tasks, identifying worn parts and scheduling replacements., • Read and interpret mechanical drawings, electrical schematics, and wiring diagrams., • Mentor Level 1 technicians, guiding and reviewing their work., • Assist in packaging reliability improvement initiatives, root cause analyses, and process optimization., • Support emergency breakdowns and unscheduled repairs to minimize downtime., • Participate in regulatory and safety audits related to packaging lines. Level 3 - Mechanic, Maintenance (PKG.) Mechanics are highly skilled professionals who lead complex repairs, system diagnostics, and project-based maintenance work. They serve as subject matter experts and may act as a shift lead. Operates independently with full responsibility over packaging line performance. Handles advanced diagnostics, major repairs, preventive maintenance programs. Makes judgment calls on repair vs replace. Leads projects, supports regulatory compliance, and provides technical leadership. Works with the engineerign team in identfying and proposing process improvements and in maintaining adequate critical spare parts as well as consumables. Key Responsibilities: • Lead maintenance, upgrade, and optimization of complex packaging lines (blister, bottle, cartooning, label printing, IFC lines)., • Perform advanced diagnostics, root cause analysis, and system redesigns to improve reliability and throughput., • Take full responsibility for major line failures and coordinate cross‑functional resources to resolve issues., • Plan and execute capital projects, line changeovers, expansions, and line integrations., • Act as technical liaison with vendors, OEMs, contractors, and internal engineering groups., • Develop and manage preventive and predictive maintenance programs., • Mentor, train, and coach Level 1 and Level 2 technicians., • Participate in regulatory inspections and ensure compliance documentation., • Recommend equipment upgrades, modifications, or replacements., • Lead packaging continuous improvement initiatives (OEE improvements, downtime reduction). Requirements Education & Qualification: Level 1 – Mechanic, Maintenance (PKG.) • High School diploma or GED required., • 0–2 years in maintenance experience in a manufacturing environment, • Basic mechanical aptitude and tool familiarity., • Ability to follow written SOPs and safety protocols., • Willingness to work flexible shifts and overtime., • Forklift experience is a plus. Level 2 – Mechanic, Maintenance (PKG.) • High school graduate or GED equivalent, Technical or vocational training is a plus., • 3+ years of hands-on maintenance experience in manufacturing., • Strong understanding of safety, compliance, and regulatory standards., • Knowledge of cGMP, OSHA, and equipment schematics., • 1+ Years work experience in a regulated industry such as Nutritional’s, vitamins, food manufacturing or pharmaceutical equipment maintenance is preferred. Level 3 – Mechanic, Maintenance (PKG.) • Must have a high school diploma or GED equivalent, • Associate degree, technical certification, or vocational training is a plus, • 5+ Years work experience in a regulated industry such as Nutritional’s, vitamins, food manufacturing or pharmaceutical equipment maintenance is preferred., • Advanced understanding of mechanical, pneumatic, and electrical systems., • PLC troubleshooting experience preferred., • Strong leadership and communication skills., • Ability to work independently with little to no supervision., • Trade certifications in HVAC, electrical, pneumatics, or hydraulics are highly preferred. Certifications, Licenses, Credentials: • License or certifications in electronics, pneumatics and/or hydraulics preferred., • Forklift /scissor lift driver’s certification is a plus but not a requirement. Skills & Ability • HVAC, Electrical, Plumbing, Painting, pneumatic, boilers, compressed air systems, pumps, hydraulic and Mechanical systems as required. PLC is a plus., • General PC proficiency and work order systems etc., • Skill in handling several projects or tasks at the same time, or within a given time frame., • The ability to recognize a safety issue or potential safety issue., • Skill in quality and compliance vigilance., • Ability to maintain a professional, positive attitude at all times., • Ability to communicate with coworkers, management team members, and other individuals in a courteous and professional manner., • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards, etc., • Demonstrates the ability to read and write basic English to be able to understand the industry-regulated instruction sheets., • Demonstrates forklift experience with both sit-down and stand-up trucks., • Demonstrates the ability to read and write basic English to be able to understand the industry regulated instruction sheets., • Mechanically inclined to understand inner workings of equipment., • Able to read from schematics and blueprints. Physical Requirements (lifting, etc.): • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift., • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment., • Must be able to wear all PPE including a lab coat, face mask, booties, gloves, safety glasses/goggles, and respirators. Work Environment (Office, Warehouse, temperature extremes, etc.): • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. May occasionally work on the outside of the building, on the grounds, in parking areas, or on the roof during all seasons. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. 2nd shift 3:00pm to 11:30pm

Job Description Job Description Date 10/2025 Location 1300 Airport Road, North Brunswick NJ Title Maintenance Mechanic - MFG Department Facilities / Engineering Reports to Manager, Maintenance FLSA (Exempt or Non-Exempt) Non -Exempt Role Overview The Maintenance Mechanic is responsible for maintenance, repair and troubleshooting, Processing equipment such as conveyors, blowers, sifters, burners, grinders, conventional & high-speed encapsulation equipment, vacuum & hydraulic pumps, air compressors, fluid bed dryers, coating machines, granulators, tablet compression machines, etc. Areas of Responsibility Level 1 – Mechanic, Maintenance (MFG) Mechanic supports routine maintenance, equipment cleaning, basic troubleshooting, and minor repairs under supervision. Ideal for those newer to manufacturing maintenance, this role focuses on learning and executing tasks safely and accurately. Employees at this level operate under close supervision. They apply foundational mechanical and electrical knowledge to assist in setup, repair, troubleshooting, and maintenance of manufacturing equipment. Independent judgment is limited; more complex tasks are escalated to higher levels. Key Responsibilities: • Perform disassembly, cleaning, and setup of basic production equipment., • Assist senior technicians in scheduled maintenance tasks., • Replace small parts (belts, hoses, filters) with direction., • Learn and follow cGMP and safety procedures., • Complete daily logs, maintenance checklists, and safety forms., • Participate in basic troubleshooting with guidance., • Respond to facility and equipment issues under supervision., • Operate forklifts and lifts (certification preferred). Level 2 – Mechanic, Maintenance (MFG) Mechanic requires the ability to independently perform equipment maintenance, moderate troubleshooting, and lead to smaller repairs. Employees at this level work with moderate supervision, frequently exercising independent judgment. They apply solid mechanical and electrical skills to set up, repair, troubleshoot, and maintain equipment. They are expected to analyze problems, propose solutions, and take ownership of more complex tasks. Key Responsibilities: • Conduct intermediate-level repairs on packaging and processing equipment., • Troubleshoot mechanical, pneumatic, and electrical systems., • Use diagnostic tools (calipers, micrometers, multimeters, etc.)., • Coordinate with vendors to address equipment issues., • Maintain spare parts inventory and request supplies., • Operate and maintain boilers, HVAC, pumps, and compressors., • Record maintenance activities accurately in logbooks and systems., • Train and mentor Level 1 Technicians., • Support emergency calls and on-call rotations. Level 3 – Mechanic, Maintenance (MFG) Mechanic are highly skilled professionals who lead complex repairs, system diagnostics, and project-based maintenance work. They serve as subject matter experts and may act as a shift lead. Employees operate with minimal to no supervision. They are trusted to independently plan, diagnose, repair, and maintain complex manufacturing equipment. They make high‑level judgments, lead projects, and serve as technical experts and advisors. Employees work closely with the engineering team to identify mechiancal issues, processing issues and propose process improvement measures mechiancally to improve productivity and effeciency of equipment. Have a deep understanding of the process and equipment being used. Key Responsibilities: • Lead troubleshooting and repairs of high-speed and complex machinery (e.g., encapsulators, fluid bed dryers, tablet presses)., • Diagnose and resolve advanced mechanical/electrical problems., • Manage and execute preventative maintenance programs., • Read and interpret advanced schematics, blueprints, and manuals., • Serve as a technical liaison between departments and vendors., • Lead regulatory inspections (OSHA, EPA, etc.) support and documentation., • Mentor and train Levels 1 and 2 staff., • Plan and coordinate plant shutdowns and major repirs., • Champion safety and compliance across the facility. Requirements Education & Qualification: Level 1 – Mechanic, Maintenance (MFG) • High School diploma or GED required., • 0–2 years in maintenance experience in a manufacturing environment, • Basic mechanical aptitude and tool familiarity., • Ability to follow written SOPs and safety protocols., • Willingness to work flexible shifts and overtime., • Forklift experience is a plus. Level 2 – Mechanic, Maintenance (MFG) • High school graduate or GED equivalent, Technical or vocational training is a plus., • 3+ years of hands-on maintenance experience in manufacturing., • Strong understanding of safety, compliance, and regulatory standards., • Knowledge of cGMP, OSHA, and equipment schematics., • 1+ Years work experience in a regulated industry such as Nutritional’s, vitamins, food manufacturing or pharmaceutical equipment maintenance is preferred. Level 3 – Mechanic, Maintenance (MFG) • Must have a high school diploma or GED equivalent, • Associate degree, technical certification, or vocational training is a plus, • 5+ Years work experience in a regulated industry such as Nutritional’s, vitamins, food manufacturing or pharmaceutical equipment maintenance is preferred., • Advanced understanding of mechanical, pneumatic, and electrical systems., • PLC troubleshooting experience preferred., • Strong leadership and communication skills., • Ability to work independently with little to no supervision., • Trade certifications in HVAC, electrical, pneumatics, or hydraulics are highly preferred. Certifications, Licenses, Credentials: • License or certifications in electronics, pneumatics and/or hydraulics preferred., • Forklift /scissor lift driver’s certification is a plus but not a requirement. Skills & Ability • HVAC, Electrical, Plumbing, Painting, pneumatic, boilers, compressed air systems, pumps, hydraulic and Mechanical systems as required. PLC is a plus., • General PC proficiency and work order systems etc., • Skill in handling several projects or tasks at the same time, or within a given time frame., • The ability to recognize a safety issue or potential safety issue., • Skill in quality and compliance vigilance., • Ability to maintain a professional, positive attitude at all times., • Ability to communicate with coworkers, management team members, and other individuals in a courteous and professional manner., • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards, etc., • Demonstrates the ability to read and write basic English to be able to understand the industry-regulated instruction sheets., • Demonstrates forklift experience with both sit-down and stand-up trucks., • Demonstrates the ability to read and write basic English to be able to understand the industry regulated instruction sheets., • Mechanically inclined to understand inner workings of equipment., • Able to read from schematics and blueprints. Physical Requirements (lifting, etc.): • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift., • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneel on the floor to clean under the equipment., • Must be able to wear all PPE including a lab coat, face mask, booties, gloves, safety glasses/goggles, and respirators. Work Environment (Office, Warehouse, temperature extremes, etc.): • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employee can be exposed daily to chemicals and cleaning agents. May occasionally work on the outside of the building, on the grounds, in parking areas, or on the roof during all seasons. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. Job Description Acknowledgement I have read and understand the job requirements, responsibilities, and expectations set forth in the job description provided for my position. I attest that I can perform the essential job functions as outlined with or without any reasonable accommodation. 2nd shift 3:00 PM to 11:30 PM

Job Description Job Description Date 09/25 Location 1300 Airport Road, North Brunswick NJ Title Mechanic, Building Maintenance Department Facilities / Engineering Reports to Manager, Maintenance FLSA (Exempt or Non-Exempt) Non -Exempt Role Overview The Building Maintenance Mechanic is responsible for the upkeep, repair, and maintenance of building systems, structures and utilities supporting operations in the facility. . This includes HVAC, plumbing, electrical systems, carpentry, painting, and general facility maintenance along with supporting equipment/utilities such as Air compressors, boilers, dust collectors etc.. The role ensures a safe, functional, and compliant environment for building occupants, adhering to Good Manufacturing Practices (cGMPs) and other industry standards. Areas of Responsibility Level 1 – Mechanic, Building Maintenance Employee will assist in the upkeep and repair of building systems under close supervision. This role is ideal for individuals beginning their career in facilities maintenance within a regulated manufacturing and warehouse environment.. Employees at this level operate under close supervision. They apply foundational mechanical and electrical knowledge to assist in setup and repairs. Independent judgment is limited; more complex tasks are escalated to higher levels. Key Responsibilities: • Assist in routine inspections and basic maintenance tasks on HVAC, plumbing, and structural systems. under supervision., • Perform minor repairs on building systems (e.g., replace light bulbs, unclog drains)., • Assist in preventive maintenance activities., • Maintain cleanliness and organization of work areas., • Report issues and escalate complex problems to senior staff. Level 2 – Mechanic, Building Maintenance Employee will independently manage routine and moderate maintenance tasks, ensuring the functionality and compliance of building systems. This role is suitable for individuals with a solid foundation in facilities maintenance and a proactive approach to problem-solving. Employees at this level work with moderate supervision, frequently exercising independent judgment. They apply skills to set up, repair, and maintain facility/building and associated utilities. They are expected to analyze problems, propose solutions, and take ownership of more complex tasks. Key Responsibilities: • Conduct inspections and perform preventive maintenance on HVAC, plumbing, electrical, and structural systems., • Diagnose and repair minor to moderate issues in building systems., • Coordinate with vendors for specialized repairs and services., • Maintain accurate records of maintenance activities and inventory., • Assist in training and mentoring Level 1 technicians. Level 3 – Mechanic, Building Maintenance Employees will oversee complex maintenance projects, lead preventive maintenance initiatives, and ensure compliance with all safety and regulatory standards. This role is designed for individuals with extensive experience and leadership capabilities in facilities maintenance Employee will operates independently with full responsibility for maintenance operations, making strategic decisions to improve facility performance. Key Responsibilities: • Lead and oversee complex maintenance projects and repairs., • Develop and implement preventive maintenance schedules., • Ensure compliance with all safety and regulatory standards., • Manage relationships with contractors and service providers., • Prepare and manage maintenance budgets and reports., • Supervise and mentor Level 1 and Level 2 technicians. Requirements Education & Qualification: Level 1 – Mechanic, Building Maintenance • High school diploma or GED equivalent., • Basic knowledge of building systems., • Ability to use hand tools and power equipment safely., • Strong attention to detail and willingness to learn., • Ability to follow instructions and work as part of a team. Level 2 – Mechanic, Building Maintenance • High school diploma or GED equivalent; vocational training or certification in building maintenance preferred., • 3–5 years of experience in building maintenance or a related field., • Proficiency in using diagnostic tools and equipment., • Strong problem-solving skills and ability to work independently., • Knowledge of building codes and safety regulations. Level 3 – Mechanic, Building Maintenance • High school diploma or GED equivalent; advanced certifications or associate degree in building maintenance or facilities management preferred., • 5+ years of experience in building maintenance, with at least 2 years in a supervisory role., • In-depth knowledge of building systems and maintenance procedures., • Strong leadership, organizational, and communication skills., • Ability to manage multiple projects simultaneously., • Trade certifications in HVAC, electrical, pneumatics, or hydraulics are highly preferred. Certifications, Licenses, Credentials: • License or certifications in electronics, pneumatics and/or hydraulics preferred., • Forklift /scissor lift driver’s certification is a plus but not a requirement. Skills & Ability • HVAC, Electrical, Plumbing, Painting, pneumatic, boilers, compressed air systems, pumps, hydraulic and Mechanical systems as required. PLC is a plus., • General PC proficiency and work order systems etc., • Skill in handling several projects or tasks at the same time, or within a given time frame., • The ability to recognize a safety issue or potential safety issue., • Skill in quality and compliance vigilance., • Ability to maintain a professional, positive attitude at all times., • Ability to communicate with coworkers, management team members, and other individuals in a courteous and professional manner., • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards, etc., • Demonstrates the ability to read and write basic English to be able to understand the industry-regulated instruction sheets., • Demonstrates forklift experience with both sit-down and stand-up trucks., • Demonstrates the ability to read and write basic English to be able to understand the industry regulated instruction sheets., • Mechanically inclined to understand inner workings of equipment., • Able to read from schematics and blueprints. Physical Requirements (lifting, etc.): • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift., • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneel on the floor to clean under the equipment., • Must be able to wear all PPE including a lab coat, face mask, booties, gloves, safety glasses/goggles, and respirators. Work Environment (Office, Warehouse, temperature extremes, etc.): • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employee can be exposed daily to chemicals and cleaning agents. May occasionally work on the outside of the building, on the grounds, in parking areas, or on the roof during all seasons. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. 2nd shift - 3:00pm to 11:30 pm

Job Description At PetVet Care Centers, our mission is to improve the lives of animals and people — providing exceptional and compassionate care at every stage — for all the moments that matter. Because life is better with pets. We deliver the Ultimate Care Experience — every pet, every client, every time. That starts with a Culture of Care that supports our team members as much as the pets and clients we serve. With more than 420 locally led hospitals and over 11,000 team members nationwide, we offer: • Local autonomy with national support, • Career mobility and development opportunities, • A collaborative, inclusive environment where your wellbeing comes first You care for pets. We care for you. Position Overview Care for pets. Maintain balance and flexibility. Nurture ongoing care. Join our team as a Part-Time Veterinarian with predictable hours and a consistent home hospital assignment. You'll enjoy flexibility while working alongside a locally led care team supported by national resources. Whether you're balancing family commitments, pursuing personal interests, or simply seeking a more sustainable pace, we're here to support you. This role allows you to stay clinically engaged without sacrificing balance, connection, or continuity of care. We're flexible, open to conversation, and committed to understanding your availability and goals—and building a schedule that works for both you and the hospital. Hospital Overview Plainfield Animal Hospital is excited to welcome a compassionate and skilled Veterinarian to join our well-established and vibrant team. With a strong and growing exotics caseload and a long-standing reputation as a referral center for exotic pet care in the region, this role is ideal for a doctor who is passionate about exotics medicine and interested in continued professional growth. The ideal candidate will be passionate about providing high-quality veterinary care and possess excellent communication skills to build lasting relationships with our clients. You will work alongside a team of experienced veterinarians, technicians, and support staff and will work closely with the Hospital Manager and Regional Manager. About Plainfield Animal Hospital • AAHA-Accredited: Demonstrating our commitment to the highest standards of veterinary care., • Serving the Community Since 1952: A trusted and respected practice with deep local roots., • Diverse & Engaging Caseload: Dogs, cats, small mammals, reptiles, avian species, and more. Many area hospitals refer exotics patients to us., • Advanced Diagnostic & Treatment Resources:, • In-house lab, • Digital & Dental radiography, • Ultrasound, • Collaborative support from an internal medicine specialist Compensation for Part Time roles is prorated based on experience and hours/shifts worked. Salary ranges listed in this posting reflect full-time roles. Ready to take the next step? Apply today! For questions or to connect directly, please email your resume to Lindsay Aimar at laimar@petvetcarecenters.com What We Offer We care deeply about supporting our team members — professionally and personally. Benefits include: • Signing and retention incentives up to $50,000, • Competitive salary and production bonus - no negative accrual option, • CE stipend, • Licensing and dues reimbursement, • 401(k) participation, • Team member pet discounts, • Emotional wellbeing support, including Calm app access and 24/7 EAP, • A supportive home hospital environment, backed by national resources and a strong Culture of Care Key Responsibilities • Comprehensive patient exams and medical work-ups, • Client communication and education, • Performing diagnostic procedures and surgery, • Maintaining accurate medical records, • Pharmacy duties such as prescribing medications to patients and following controlled substance protocols, • Promote teamwork and staff efficiency, • Work with the Hospital Manager on weekly priorities and expectations, • Evaluate and monitor protocols for the daily running of the hospital from intake to discharge, • Monitor cases in the hospital and attend daily rounds when possible to be sure the highest standards are being upheld, • Participate in practice management updates and training at all levels, • Performs other duties as assigned by Management. Qualifications (Required) • Veterinarian degree (DVM or VMD) from an accredited college or university, • Current State Veterinary License, • DEA registration must be obtained and maintained, • 1+ years of experience in a veterinary practice, • Strong diagnostic and clinical skills., • Excellent surgical and dental skills., • Ability to work well in a team-oriented environment., • Exceptional interpersonal and communication skills., • Commitment to providing compassionate and high-quality veterinary care., • Excellent Communication Skills and the ability to communicate effectively, efficiently, and in a timely manner with all members of the Medical and Hospital staff., • Client communication skills, must be able to elicit information, establish rapport, offer explanations with pet owners., • Display confidence and reassurance when dealing with pets experiencing severe stress, illness, or pain., • May include some climbing, balancing, stooping, kneeling, crouching, or crawling., • Some tasks involve the periodic performance of moderately physically demanding work., • Position does require the ability to lift up to 50 pounds. Preferred Skills (Nice to Have) • Clinical Knowledge and Skills: Demonstrate clinical knowledge and skill in examining and assessing animals. Perform cardiovascular, respiratory, orthopedic, neurological and other necessary examinations. Diagnosis and prescribe appropriate treatment., • Problem-Solving: Ability to develop solutions to challenges relating to the management of a high-quality veterinary hospital., • Communication Skills: Demonstrate effective communication of diagnostic and therapeutic options to clients. Display effective communication with internal medical and hospital staff., • Professionalism: Work as part of a high-quality, professional veterinary team with the ability to provide and receive appropriate constructive criticism, suggestions, and feedback., • Business Acumen: Ability to understand the management and finances of the veterinary hospital practice., • Ethics: Knowledge and understanding of ethical principles that guide decisions affecting patients., • Commitment to Continuing Education: Commitment to utilize available resources of continuing education and to facilitate learning of others. Pay Range$140,000—$165,000 USD At PetVet Care Centers, we're committed to a Culture of Care — for pets, for the people who love them, and for the team members who make it all possible. With more than 420 hospitals across the U.S. and a team of over 11,000 dedicated professionals, including 1700+ veterinarians, we offer a unique blend of local leadership and national support that helps our hospitals thrive. Our model is built on partnership, collaboration, and local medical autonomy, empowering each hospital to deliver high-quality care while benefiting from shared resources and a strong professional community. Whether you're providing care in a hospital or supporting operations behind the scenes, PetVet is a place where you can grow your career, stay connected to your purpose, and make a meaningful impact. You care for pets. We care for you. PetVet is an equal opportunity employer. All employment decisions are made without regard to race, color, age, gender, gender identity or expression, sexual orientation, marital status, pregnancy, religion, citizenship, national origin/ancestry, physical/mental disabilities, military status or any other basis prohibited by law. EOE, M/F/D/V PetVet respects your privacy and is committed to protecting your personal information. Please see our privacy notice for additional information about our data practices.

Job Description Date 06/2020 Location 1200 Airport Road, North Brunswick NJ Title Chemist, Quality Control 3 Department Quality Control Reports to Manager, Chemistry Laboratory FLSA (Exempt or Non-Exempt Exempt Role Overview The Chemist, QC 3 performs specific routine analysis of samples of raw materials, in process, and finished products according to established (official and/or in-house) test procedures. Testing assesses the strength, identify, purity of the test samples and/or raw materials. The Chemist prepares reagents, standards, and solutions and may monitor and verify quality in accordance with statistical process and other control procedures. The Chemist maintains organization and compliance while working in a fast-paced environment with changing priorities. The duties and responsibilities described for each level are not limited to those outlined and are not intended to be a comprehensive list of all activities, functions, or responsibilities required of the position. Management reserves the right to modify, assign, or reassign duties and responsibilities at any time based on business needs. Areas of Responsibility • Troubleshoot /test specific batches in order to assist in determining the root cause of off-spec product and makes recommendations for ingredient adjustments to meet required specifications., • Ensures compliance with company and customer specifications as well as federal, state and local regulatory requirements, • Investigates customer complaints and provides management with test results information., • Performs assigned sampling, physical, chemical tests and assay on raw materials, active pharmaceutical ingredients, in-process, finished, and stability products in an FDA regulated lab environment. Uses a variety of wet chemicals, physical and instrumental techniques as well as routine QC instruments (HPLC, GC, IR, Auto Titrator, Bulk Density, UV Spectrophotometer, Dissolution, Karl Fisher (KF), Potentiometer)., • Performs complicated testing with supervisory direction. Documents work clearly and performs tests accurately., • Preparation and review of QC related documents is 5%of daily activities., • Test of samples/raws as assigned and reports the results. Testing activities represents 95% of daily work., • Prepares and/or Reviews Test Procedures, SOP's and Protocols as assigned., • Performs maintenance and calibrations of laboratory instruments /equipment with supervisory direction/training., • Complies with all regulatory/ in-house requirements (may include but not be limited to safety, housekeeping, laboratory chemical waste, cGMP,GLP, documentation) when performing the assigned activity., • Must be able to work extended hours as needed and occasional weekends., • Other duties and responsibilities as assigned. Other Responsibilities Including Safety: • Works in a safe and responsible manner to create an injury-free and incident-free workplace., • Complies with all job-related safety and other training requirements., • Keeps management informed of area activities and of any significant problems. Requirements Education & Qualification: • BS in Chemistry or related scientific disciplines, • One (1) year of basic chemistry techniques (can be academic) is a plus, • Minimum of 1 -3 years QC lab work experience with industry experience in dietary supplements, food, or OTC manufacturing. Certifications, Licenses, Credentials: • N/A Skills & Ability • Ability to maintain integrity and honesty at all times and to communicate with transparency., • Ability to work independently or as part of a team., • Solid understanding of cGMP’s and GLP and is familiar with 21 CFR Part 11, • Strong working knowledge of Microsoft Word, Excel., • Good documentation practices and able to write simple, clear reports, • Meets commitments on time and practices time-management skills, • Seeks to identify continuous improvement needs, • Experience with Shimadzu LC2010, Nexera, GC2010, Thermo ICP-MS, Labsolution and Waters Empower Lab Software a plus. Physical Requirements (lifting, etc.): • May execute 90%-100% of their work at the bench level either standing or sitting on a stool., • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances and leaning over equipment as well as kneeling on the floor to clean under the equipment., • Must be able to wear all PPE including a lab coat, face mask, booties, gloves, safety glasses/goggles, and respirators., • On occasion may need to lift up to 35 lbs., • Ability to navigate office, lab, and/or plant floor working environments. Work Environment (Office, Warehouse, temperature extremes, etc.): • Approximately 80% of work performed in a laboratory environment which may have unpleasant odors or hazardous conditions., • Temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an “at will” relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. Job Description Acknowledgement I have read and understand the job requirements, responsibilities, and expectations set forth in the job description provided for my position. I attest that I can perform the essential job functions as outlined with or without any reasonable accommodations.

Job Description Job Description Date 03/26 Location 1300 Airport Road, North Brunswick NJ Title Supervisor, Maintenance Building Department Facilities / Engineering Reports to Manager, Maintenance FLSA (Exempt or Non-Exempt) Exempt Role Overview The Supervisor, Maintenance Building & Facilities, is responsible for overseeing all building maintenance operations, utilities, and facility systems that support manufacturing, warehouse, and office operations. This role ensures that the facility infrastructure operates safely, efficiently, and in compliance with cGMP, OSHA, and regulatory standards. The supervisor leads and works with maintenance technicians across multiple skill levels, coordinates preventive maintenance programs, manages contractors, and ensures timely resolution of facility-related issues that could impact production or safety. Employees at this level operate with a high degree of independence and leadership responsibility, directing maintenance operations, prioritizing work orders, and ensuring that building systems and utilities remain reliable and compliant. Areas of Responsibility Leadership & Team Management • Supervise, schedule, and coordinate the activities of Level 1, Level 2, and Level 3 Building Maintenance Mechanics., • Provide training, mentoring, and performance feedback to maintenance staff., • Assign daily work orders and ensure completion of maintenance tasks in a timely manner., • Promote a culture of safety, accountability, and continuous improvement. Facility & Building Systems Management • Oversee maintenance and repair of HVAC systems, plumbing, electrical systems, structural components, roofing, carpentry, painting, and general building infrastructure for multiple sites., • Ensure reliable operation of facility utilities including air compressors, boilers, dust collectors, pumps, compressed air systems, and related mechanical systems., • Monitor building systems to ensure operational efficiency and minimal disruption to manufacturing activities. Preventive Maintenance & Reliability • Develop, implement, and oversee preventive and predictive maintenance programs for facility systems and utilities., • Utilize CMMS or work order systems to track maintenance activities, repairs, and equipment history., • Analyze recurring maintenance issues and implement long-term corrective solutions. Regulatory Compliance • Ensure facility operations comply with cGMP, OSHA, environmental, and safety regulations., • Maintain accurate documentation and maintenance records required for regulatory inspections and audits., • Support internal, customer, and regulatory audits related to facilities and utilities. Vendor & Contractor Coordination • Manage relationships with external contractors, service vendors, and facility service providers., • Coordinate specialized repairs, inspections, and facility upgrades., • Ensure vendors comply with safety and GMP requirements while working onsite. Facility Projects & Improvements • Assist in planning and executing facility upgrades, renovations, and capital improvement projects., • Provide technical input on building infrastructure improvements and equipment installations., • Monitor project timelines and ensure work is completed according to specifications. Safety & Risk Management • Conduct facility safety inspections and ensure corrective actions are implemented., • Identify potential safety risks related to facility systems and maintenance operations., • Ensure proper use of PPE, safety procedures, and lockout/tagout practices. Budget & Resource Management • Assist in preparing and managing maintenance budgets and resource allocation., • Monitor maintenance costs, inventory of spare parts, and supply usage., • Identify cost-saving opportunities without compromising safety or compliance. Requirements Education & Qualification: • High school diploma or GED required., • Associate’s degree or technical certification in Facilities Maintenance, Mechanical Engineering Technology, HVAC, Electrical, or related field preferred. Certifications, Licenses, Credentials: • HVAC, electrical, mechanical, or industrial maintenance certifications., • OSHA safety training., • Forklift or scissor lift certification preferred., • License or certifications in electronics, pneumatics and/or hydraulics preferred. Skills & Ability • HVAC, Electrical, Plumbing, Painting, pneumatic, boilers, compressed air systems, pumps, hydraulic and Mechanical systems as required. PLC is a plus., • General PC proficiency and work order systems etc., • Skill in handling several projects or tasks at the same time, or within a given time frame., • The ability to recognize a safety issue or potential safety issue., • Skill in quality and compliance vigilance., • Ability to maintain a professional, positive attitude at all times., • Ability to communicate with coworkers, management team members, and other individuals in a courteous and professional manner., • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards, etc., • Demonstrates the ability to read and write basic English to be able to understand the industry-regulated instruction sheets., • Demonstrates forklift experience with both sit-down and stand-up trucks., • Demonstrates the ability to read and write basic English to be able to understand the industry regulated instruction sheets., • Mechanically inclined to understand inner workings of equipment., • Able to read from schematics and blueprints. Physical Requirements (lifting, etc.): • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift., • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneel on the floor to clean under the equipment., • Must be able to wear all PPE including a lab coat, face mask, booties, gloves, safety glasses/goggles, and respirators. Work Environment (Office, Warehouse, temperature extremes, etc.): • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employee can be exposed daily to chemicals and cleaning agents. May occasionally work on the outside of the building, on the grounds, in parking areas, or on the roof during all seasons. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. Job Description Acknowledgement I have read and understand the job requirements, responsibilities, and expectations set forth in the job description provided for my position. I attest that I can perform the essential job functions as outlined with or without any reasonable accommodations. 1st shift

Job Description Job Description Date 02/2024 Location 1300 Airport Road, North Brunswick NJ Title Lead, Quality Control Chemist Department Quality Control Reports to Manager, Quality Control Laboratory FLSA (Exempt or Non-Exempt Exempt Role Overview The Lead, QC Chemist performs specific routine analysis of samples of raw materials, in process, and finished products according to established (official and/or in-house) test procedures. Testing assesses the strength, identify, purity of the test samples and/or raw materials. The Chemist prepares reagents, standards, and solutions and may monitor and verify quality in accordance with statistical process and other control procedures. The Chemist maintains & organizes testing’s and compliance while working in a fast-paced environment with changing priorities. The duties and responsibilities described for each level are not limited to those outlined and are not intended to be a comprehensive list of all activities, functions, or responsibilities required of the position. Management reserves the right to modify, assign, or reassign duties and responsibilities at any time based on business needs. Areas of Responsibility • Performs assigned sampling, physical, chemical tests and assay on raw materials, active dietary ingredients, in-process, finished, and stability products in an FDA regulated lab environment. Uses a variety of wet chemicals, physical and instrumental techniques as well as routine QC instruments HPLC, GC, IR, Auto Titrator, Bulk Density, UV Spectrophotometer, Dissolution, Karl Fisher (KF), Potentiometer., • Troubleshoots HPLC, GC, QC instruments for specific tests in order to assist in determining the root cause of aberrant results and help in performing Lab investigations / OOS., • Evaluates daily raw data sheets for product samples and release, if needed., • Coordinates annual review of STPS / SOPS as per USPL procedures., • Prepare new methods and test procedures for new or existing raw materials and finished products., • Ensures compliance with company and customer specifications as well as federal, state and local regulatory requirements., • Perform floor supervision of QC Chemists for routine testing, if required., • Prepares and reviews QC related documents during and finishing of testing of sample. Submit all testing related documents like data sheets, chromatograms, spectras, instruments print outs in timely manner to Qc Documentation department to release the batch of raw material / finished product., • Prepares and/or Reviews Test Procedures, SOP's and Protocols as assigned., • Performs maintenance and calibrations of laboratory instruments /equipment, if required to help in-house calibrations., • Assures GMP compliance according to FDA CFR Part 111 and USPL SOPs / guidelines., • Complies with all regulatory/ in-house requirements (may include but not be limited to safety, housekeeping, laboratory chemical waste, cGMP, GLP, documentation) when performing the assigned activity., • Trains new QC Chemists to perform instrumental testing., • Must be able to work extended hours as needed and occasional weekends., • Other duties and responsibilities as assigned by QC in-charge / management. Other Responsibilities Including Safety: • Works in a safe and responsible manner to create an injury-free and incident-free workplace., • Complies with all job-related safety and other training requirements., • Keeps management informed of area activities and of any significant problems. Requirements Education & Qualification: • BS/MS in Chemistry or related scientific disciplines., • Five (5) years of basic chemistry techniques (can be academic) is a plus., • Minimum of 5 years QC lab work experience in handling HPLC, GC, KF, Dissolution, DT and other sophisticated lab instruments in dietary supplements, food or OTC / Pharmaceutical manufacturing industry. Certifications, Licenses, Credentials: • N/A Skills & Ability • Ability to maintain integrity and honesty at all times and to communicate with transparency., • Ability to work independently or as part of a team., • Solid understanding of cGMP’s and GLP and is familiar with 21 CFR Part 11., • Strong working knowledge of Microsoft Word, Excel., • Good documentation practices and able to write simple, clear reports., • Meets commitments on time and practices time-management skills., • Seeks to identify continuous improvement needs., • Experience with Shimadzu LC2010, Nexera, GC2010, Thermo ICP-MS, Labsolution and Waters, • Empower Lab Software a plus. Physical Requirements (lifting, etc.): • Ability to navigate office, lab, and/or plant floor working environments., • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances and leaning over equipment as well as kneeling on the floor to clean under the equipment., • Must be able to wear all PPE including a lab coat, face mask, booties, gloves, safety glasses/goggles, and respirators., • On occasion may need to lift up to 20lbs Work Environment (Office, Warehouse, temperature extremes, etc.): • Work is regularly performed inside a laboratory environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents., • May execute up to 20% of their work at the bench level either standing or sitting on a stool., • Work performed in a standard office environment is without unpleasant or hazardous conditions. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. Job Description Acknowledgement I have read and understand the job requirements, responsibilities, and expectations set forth in the job description provided for my position. I attest that I can perform the essential job functions as outlined with or without any reasonable accommodation.

Job Description Job Description Date 12/2025 Location 1300 Airport Road, North Brunswick NJ Title Supervisor, Production Department Standard Manufacturing Reports to Manager, Production FLSA (Exempt or Non-Exempt) Non-Exempt Role Overview The Production Supervisor is responsible for the safety of the production employees, quality of the products, and effective use of all people, time and material in meeting assigned production schedules. Safety, sanitation, housekeeping, GMP standards, problem solving ability as well as good employee relations are considered key elements to success. This position is responsible for planning, coordinating, and managing all production activities of those employees on the floor. They will need to coordinate and partner with other departments to maintain schedules and effect necessary changes and revisions. Areas of Responsibility Production • Ensures that production schedule is met by distributing workload in accordance with changing priorities., • Ensures production operations are properly controlled, and regulatory compliance requirements are met by ensuring the accuracy of batch documentation, Standard Operating Procedures, and critical documentation templates. Also, that equipment is in good repair and current calibration, training is current, and high standards of housekeeping are maintained in all areas of responsibility., • Ensures operation of equipment by coordinating, preventative maintenance, repairs; and evaluating new equipment and techniques, • Evaluates/solves production problems by reviewing the area of concern, developing potential solutions, technically evaluating, or testing the solutions, and preparing recommendations for management., • Maintains a work environment which fosters teamwork and supports the company’s efforts to continuously improve processes., • Prepares production reports and variance explanations, and accurately complies and files, Inventories and order production supplies, • Interacts with multiple functions and shifts within the 24/7 operation, • Works closely with maintenance establishing preventative maintenance practices Quality • Participates in any investigation for a deviation involving a batch record., • Maintains proper gowning and hygiene to ensure integrity of the product as per cGMP’s and company policies., • Follows batch records, SOP’s, and cGMP guidelines to ensure product specifications and tolerances are met., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOPs at all times., • Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Ensures that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing. People • Ensures each employee works in a safe and responsible manner in order to create an injury-free and incident-free workplace. Comply with all job-related safety and other training requirements., • Fosters a collaborative environment in which diverse backgrounds are respected and valued., • Establishes and maintains effective relationship with your peers, team, and senior managers in order to communicate effectively, • Provides clear direction & expectations for direct reports and assures that tasks & responsibilities are clear, • Sets goals and objectives in alignment with the organization for self and direct reports: Creates action plans, sets milestones, and delivers progress reports and developmental plans for team members., • Develops employees that contribute to the daily success of the line and can be successful in the supervisor’s absence, • Maintains open lines of communication with employees, peers, and management, • Assuming responsibility for the efficient, timely, and accurate completion of Production functions, • Learns and understands specific manufacturing operations sufficiently and is able to provide support in other areas as needed, • Evaluates performance of employees and creating corrective action plans where appropriate, • Assists with personnel decisions including hiring, terminations, attendance management, wage decisions, transfers and promotions., • Interprets and explains the policies of the USPL Handbook so employees can understand the application of each policy as well as management’s purpose for each policy., • Apply all company policies fairly and consistently across departments and develop a relationship of trust and transparency with their employees., • Identifies strengths and weaknesses of all associates on their team to ensure optimal performance; knows which employees they can assign additional tasks to, and which need closer scrutiny, • Other duties as assigned Requirements Education & Qualification: • BA/BS degree and 3+ years Supervisory experience, • Minimum of three (3) years of work experience in nutritionals, supplements, food, or pharmaceutical manufacturing industries., • Hands-on experience with any of the following processes: Blending/Granulation, Tablet Compression and/or Film Coating, Encapsulation, or Pharmacy/Pre-Weigh Dispensing Certifications, Licenses, Credentials: • N/A Skills & Ability • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards etc., • Mechanically inclined to understand inner workings of equipment., • Knowledge of any of the following processes: Blending/Granulation, Tablet Compression and/or Film Coating, Encapsulation, or Pharmacy/Pre-Weigh Dispensing., • Demonstrates the ability to read and write English in order to be able to understand the industry regulated instruction sheets. Physical Requirements (lifting, etc.): • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift, • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment., • Must be able to wear all PPE including a lab coat, face mask, booties, gloves, safety glasses/goggles, and respirators. Work Environment (Office, Warehouse, temperature extremes, etc.): • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate., • Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. Job Description Acknowledgement I have read and understand the job requirements, responsibilities, and expectations set forth in the job description provided for my position. I attest that I can perform the essential job functions as outlined with or without any reasonable accommodation. 3rd shift - 11:00 PM to 7:30 AM

Job Description Job Title: Registered Dental Assistant Department: Operations Reports to: Dental Practice Manager FLSA Status: Non-Exempt Company Overview ProSmile is the fastest growing dental organization on the East Coast and Midwest. Our premier DSO is led by world class dentists who understand what highly skilled dentists and dental professionals need to grow a practice while focusing on delivering the best-in-class clinical care to their patients. We offer up-to-date equipment and technology, experienced and friendly staff, and dentists who truly care about their patients, as well as competitive pay and, where applicable, a benefits package that includes medical, dental, vision, 401(k), training, and career growth opportunities. Position Summary As a Registered Dental Assistant, you will help support the clinical needs of our patients and doctors. The duties of a Dental Assistant are very important for the functionality of our dental offices. These duties can include patient care, recordkeeping, and appointment scheduling. As a Registered Dental Assistant, you will work under the supervision of dentists and work closely with dental hygienists in their day-to-day activities. Duties and Responsibilities The duties include, but are not limited to: • Clearly demonstrate knowledge of dental instruments and assist the dentist in rendering patient care chairside., • Maintaining inventory control in the operatories where treatment is rendered by the Provider, • Adhering to OSHA, HIPAA, and CDC guidelines, • Deliver world class patient interactions related to scheduling, follow up treatment, post-surgical information and record keeping, • Be able to perform basic lab procedures such as taking impressions, pour models, and preparing cases for external labs., • Remove excess cement from crowns or other restorations and orthodontic appliances;, • Fabricate and cement temporary crowns and bridges after preparation of tooth (teeth) by a dentist., • Placing and removing rubber dam and clamp., • This does not include intra-oral occlusal adjustment;, • Trial size (pre-select) orthodontic bands, wires, stainless steel crowns and temporary crowns intra-orally or on diagnostic models;, • Place and remove arch wires and ligature wires, • Remaining items that are within the scope of Registered Dental assistant., • Maintaining public area appearance, • Performs miscellaneous job-related duties as assignedQualifications, • High School diploma or GED required, • Easily able to learn new technologies and systems required and demonstrates a desire to learn, • Applicable licensing required for the state in which you will work: Dental Radiologic Technologist (DRT) license or willing to pursue licensure immediately required., • Certified Dental Assistant certificate preferred, • Registered Dental Assistant License preferred, • 1+ years work experience as a Dental Assistant preferred, • Ability to work in a fast-paced environment, • Requires some flexibility in scheduling, such as the ability to work evenings and weekends as needed, • X-ray License required, • Current NJ Registered Dental Assistant license, • Active CPR Certification is required.Knowledge and Skills/Expected Competencies, • Knowledge of dental instruments and patient care., • Ability to clearly communicate medical information to professional practitioners and/or the general public., • Excellent organization, prioritization, follow up, analytical and time management skills with ability to handle multiple priorities and deadlines. Benefits Summary At ProSmile, we are committed to supporting the health and well-being of our employees and their families. We offer the following benefits for Full Time Benefits Eligible Positions (35+ hours per week) and Part Time Benefits Eligible Positions (30-35 hours per week): • Medical Insurance: Choice of five comprehensive Aetna medical plans, including options with low copays, deductible-sharing, and national provider networks., • Dental Insurance: MetLife plans offering preventative, basic, major, and orthodontic coverage options., • Vision Insurance: Davis and UHC vision plans with annual exams, eyewear allowances, and contact lens benefits., • Flexible Spending & Health Savings Accounts: Pre-tax savings accounts for medical, dependent care, and healthcare expenses., • Life & Disability Insurance: Employer-paid basic life and AD&D insurance, with voluntary life, short-term, and long-term disability plans., • Additional Perks:, • Employee Assistance Program (EAP), • Identity Theft & Fraud Protection, • Legal Support Services, • Discount Programs (including pet insurance, travel, theme parks, electronics, etc.), • Wellness Programs, • Financial Wellness and Planning Tools, • Eligible Dental Assistant team members may also have access to company-supported reimbursement for certain licenses and certifications, subject to role eligibility and company guidelines. Physical/Mental Demands and Work Environment The physical demands described are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, walk and use hands and arms to operate general office equipment (PC, telephone, file cabinets, copier, fax machine and printer). The employee may occasionally lift and/or move between 10 and 25 pounds. Specific vision abilities required by this job include close vision and ability to adjust focus. The employee may need to travel to healthcare practices. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The noise level in the work environment is usually low to moderate. The Company reserves the right to modify the job description based upon its needs and may require the employee to perform functions beyond those mentioned above. Neither this job description nor any other communication creates an employment contract between the Company and the employee. Equal Employment Our culture encourages individual development, embraces an inclusive environment, rewards innovative excellence, and leads in provider and patient satisfaction. Prosmile values diversity, inclusion, and equity as matters of fairness and effectiveness. We are committed to hiring and retaining a staff that reflects the diversity of the communities we serve, fostering an inclusive working environment where staff of all backgrounds feel welcomed and engaged. ProSmile is an Equal Opportunity Employer and encourages applications from individuals underrepresented in the medical sector, including people of color, and persons with non-traditional work and educational experience. All who believe they meet the stated qualifications are invited to apply. Company Safety We believe that the best care for our patients starts with the best care for our employees. ProSmile is committed to proactively creating and maintaining an environment that is safe for our team and patients. Employees are required to wear Personal Protective Equipment (PPE) including face masks, gloves, gowns, and more as needed and in accordance with CDC standards. Powered by JazzHR sbuUctIu24

Job Description Job Title: Dental Assistant w/ X-ray Department/Location: Operations Reports to: Dental Practice Manager FLSA Status: Non-Exempt Company Overview ProSmile is the fastest growing dental organization on the East Coast and Midwest. Our premier DSO is led by world class dentists who understand what highly skilled dentists and dental professionals need to grow a practice while focusing on delivering the best-in-class clinical care to their patients. We offer up-to-date equipment and technology, experienced and friendly staff, and dentists who truly care about their patients, as well as competitive pay and, where applicable, a benefits package that includes medical, dental, vision, 401(k), training, and career growth opportunities. Position Summary As a Dental Assistant, you will help support the clinical needs of our patients and doctors. The duties of a dental Assistant are very important for the functionality of our dental offices. These duties can include patient care, recordkeeping, and appointment scheduling. As a Dental Assistant, you will work under the supervision of dentists and work closely with dental hygienists in their day-to-day activities. Duties and Responsibilities The duties include, but are not limited to: • Clearly demonstrate knowledge of dental instruments and assist the dentist in rendering patient care chairside., • Maintain inventory control in the operatories where treatment is rendered by the Provider., • Adhering to OSHA, HIPAA, and CDC guidelines., • Deliver world class patient interactions related to scheduling, follow up treatment, post-surgical information and record keeping., • Be able to perform basic lab procedures such as take impressions, pour models, and prepare cases for external labs., • Performs miscellaneous job-related duties as assigned. Qualifications • High School diploma or GED required., • Easily able to learn technologies and systems required and demonstrates a desire to learn, • Applicable licensing required for the state in which you will work:, • For NJ- Dental Radiologic Technologist (DRT) license or willing to pursue licensure immediately required., • For MD- Dental Radiologic Technologist (DRT) license or willing to pursue licensure immediately required., • For PA- Radiation Health and Safety certificate or willing to pursue licensure immediately required., • Certified Dental Assistant preferred., • 1+ years work experience as a Dental Assistant preferred., • Ability to work in a fast-paced environment., • Requires some flexibility in scheduling, such as the ability to work evenings and weekends as needed., • X-ray License required., • Active CPR Certification is required. Knowledge and Skills/Expected Competencies • Knowledge of dental instruments and patient care., • Ability to clearly communicate medical information to professional practitioners and/or the general public., • Excellent organization, prioritization, follow up, analytical and time management skills with ability to handle multiple priorities and deadlines. Benefits Summary At ProSmile, we are committed to supporting the health and well-being of our employees and their families. We offer the following benefits for Full Time Benefits Eligible Positions (35+ hours per week) and Part Time Benefits Eligible Positions (30-35 hours per week): • Medical Insurance: Choice of five comprehensive Aetna medical plans, including options with low copays, deductible-sharing, and national provider networks., • Dental Insurance: MetLife plans offering preventative, basic, major, and orthodontic coverage options., • Vision Insurance: Davis and UHC vision plans with annual exams, eyewear allowances, and contact lens benefits., • Flexible Spending & Health Savings Accounts: Pre-tax savings accounts for medical, dependent care, and healthcare expenses., • Life & Disability Insurance: Employer-paid basic life and AD&D insurance, with voluntary life, short-term, and long-term disability plans., • Additional Perks:, • Employee Assistance Program (EAP), • Identity Theft & Fraud Protection, • Legal Support Services, • Discount Programs (including pet insurance, travel, theme parks, electronics, etc.), • Wellness Programs, • Financial Wellness and Planning Tools Physical/Mental Demands and Work Environment The physical demands described are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, walk and use hands and arms to operate general office equipment (PC, telephone, file cabinets, copier, fax machine and printer). The employee may occasionally lift and/or move between 10 and 25 pounds. Specific vision abilities required by this job include close vision and ability to adjust focus. The employee may need to travel to healthcare practices. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The noise level in the work environment is usually low to moderate. The Company reserves the right to modify the job description based upon its needs and may require the employee to perform functions beyond those mentioned above. Neither this job description nor any other communication creates an employment contract between the Company and the employee. Equal Employment Our culture encourages individual development, embraces an inclusive environment, rewards innovative excellence, and leads in provider and patient satisfaction. Prosmile values diversity, inclusion, and equity as matters of fairness and effectiveness. We are committed to hiring and retaining a staff that reflects the diversity of the communities we serve, fostering an inclusive working environment where staff of all backgrounds feel welcomed and engaged. ProSmile is an Equal Opportunity Employer and encourages applications from individuals underrepresented in the medical sector, including people of color, and persons with non-traditional work and educational experience. All who believe they meet the stated qualifications are invited to apply. Company Safety We believe that the best care for our patients starts with the best care for our employees. ProSmile is committed to proactively creating and maintaining an environment that is safe for our team and patients. Employees are required to wear Personal Protective Equipment (PPE) including face masks, gloves, gowns, and more as needed and in accordance with CDC standards. Powered by JazzHR mBK2bk1iqu

Job DescriptionDescription: Under the direct supervision of the Site Manager and under a matrix system of supervision and guidance of the PCMH Care Coordinator (PCMH) and Director of Nursing, the Certified Medical Assistant (CMA) assists patients and their families in all aspects of their clinical interaction with their provider. The CMA is an integral part of the Care Team and ensures that all patients have optimal health outcomes. Duties and Responsibilities • Greet patient and family cordially at every visit, using cultural sensitivity and customer service skills. At end of visit, escort patient to check out and ensure that concerns and questions were addressed., • Assist providers within the patient care team with the care of patients including obtaining information on reason for visit, medical history, social history, family history, medications, allergies, vital signs, and others. Responsible for entering information into the electronic medical records, verifying accuracy and reviewing answers at subsequent visits., • Ask patients if they have recently seen another provider, received new medications or were recently in the hospital. Obtain and update record with this information and obtain discharge summaries and other information from the hospital interface., • Participate in Care Team meetings (i.e., huddles) to prepare for patient visits and anticipate needs., • Assist in providing translation if needed or obtaining access to language line if the provider indicates., • Maintain privacy and confidentiality of all patients by following HIPPA regulations and policies and procedures set for by the Zufall Health Center., • Remain present in the exam room during pelvic, breast, genital and rectal examinations. May remain in the exam room for other evaluations unless the provider indicates that there is no need. If that is the case, the MA will remain close to the examination area so as to be available should the provider need them., • Inform provider that patient is ready and review clinical information to expedite visit. Maintain doors to exam room closed while patient is waiting for provider., • Assist in the educational process during and after the visit, including translation of instructions, reviewing of materials, answering questions, and ensuring that all questions are addressed by provider., • Ensure that patient understands instructions and obtains a follow up appointment if indicated by the provider., • Participate in collaborative initiatives and PDSA’s as directed by PCMH, Director of Nursing, and Chief Medical Officer Specific Duties • Obtain vital signs including height, weight, blood pressure, temperature, pulse, respiration rate and pain scale at every visit unless not required by type of visit (e.g. PPD) or if provider does not require (e.g. infant checkups). Ensure that data is entered correctly and calculations for BMI (in adults) and BMI% and Head Circumference according to the growth chart (in children) are correct., • Have a watch with a second hand and a stethoscope when on duty to perform above tasks., • Verify data as above and repeat a blood pressure reading at the end of the interview using a manual cuff if the patient initially had an elevated blood pressure reading., • Follow standing orders for patients with diabetes, patients with hypertension, patients who present with burning on urination, patients who have a delayed menstrual period and others as developed by providers and approved by the Chief Medical Officer and Director of Nursing., • Obtain finger stick samples for glucose, hemoglobin, and hemoglobin A1C as per provider order or following standing orders. Obtain urine specimen for dip or pregnancy test per provider order or standing orders, and urine culture with clean catch technique per provider order. Obtain finger stick sample for rapid HIV test if trained to perform and as ordered by provider., • Inform the provider of results of all tests done in the examination room, chart controls and enter results in the EHR., • Successfully complete competencies for all in house tests done as per CLIS and NJ State Regulations., • Work with providers to determine whether visit is billable to state and if patient is eligible for referral to our contracted subspecialists., • Ensure that every room is clean and specimens are properly disposed of after every patient., • Ensure that, at the end of the day, examination rooms and other clinical areas are clean. Ensure that tables and chairs are wiped down and any equipment, such as the SPOT machines and any wall units are cleaned with antibacterial wipes., • Ensure that counters and exam tables are wiped down and free of dirt and other substances., • Ensure that in every exam room, drawers are stocked and locked when appropriate., • Enter medications into the EHR, listing prescription medications first, followed by over-the-counter medications and supplements., • Assist the provider in recording medications given from the center’s stock by entering date of dispensing, patient’s name, medication name, lot number and expiration date, followed by the provider’s initials. Ensure that medications that have a cost are paid for by the patient before these are given out., • Assist provider in administering ordered vaccines by preparing vaccine in appropriate syringe and in the appropriate amount and made ready for verification by provider prior to administration. Administer as per Certification, as per training and as per provider., • Assist in obtaining labs from fax administrator and attach hard copies to patient documents if needed., • Assist with completion of forms, insurance referrals (to be sent to Referral Specialist if patent has insurance and requires pre-authorization), notes for work or school and other paperwork., • Provide PCMH with a list of supplies as soon as it is noted that the last box of the item has been opened and in use., • Check supplies in all exam rooms daily, check stock in storage areas weekly, and complete list of needed supplies on a daily basis as needed., • Perform other related duties as assigned by the PCMH or Site Administrator and the Director of Nursing., • Participate in annual competencies for the following, but not limited to: translation, vital signs and measurements, doing TB skin tests, all waived POC lab tests, infection prevention and control, sterilization process and instrument preparation, OSHA, immunization administration and reconciliation, standing orders, medical waste management, patient preparation for the visit, cultural competency and customer service. Additional Duties as CMA I with EKG Certification • All duties listed above under Duties and Responsibilities., • Perform EKG when ordered by provider following proper technique, making sure privacy is maintained, documenting client name, date of birth and date done on the EKG. A person complaining of chest pain is to be evaluated by the provider first before obtaining the EKG. The CMA is to have the EKG available in case the provider requests one. Additional Duties as CMA I with Phlebotomy Certification • All duties listed above under Duties and Responsibilities., • Perform phlebotomies as per provider orders and according to standard procedure and using aseptic technique. Before blood draw, verify two sources of identification by asking the patient his or her name and his or her date of birth and verifying the order. Additional Duties as CMA II • All duties listed above, including Additional Duties as CMA I with EKG Certification and Additional Duties as CMA I with Phlebotomy Certification. Requirements: • Minimum High School Diploma or GED, • Have current certification as a Medical Assistant, • Have current certification for EKG, Phlebotomy and BLS, • Minimum 6 months experience in clinical/medical setting, or at least 120 hours of externship experience

Job Description Job Description Date 7/2025 Location 1300 Airport Road, North Brunswick NJ Title Associate, QA Operation Support Department Quality Assurance Reports to Manager, QA Operations FLSA (Exempt or Non-Exempt Exempt Role Overview This position is one of high regulatory responsibility that provides direct quality oversight for the cGMP production of Dietary Supplements and nutraceuticals. This position will help ensure compliance to SOPs, batch records, master manufacturing records, and to 21 CFR Part 111 and 117. Areas of Responsibility Level 1 - Associate, QA Operations Support Summary of the Role: Entry-level position in the QA department focused on supporting sampling and/or dispensing activities under supervision. Intended for fresh graduates or new entrants to the pharmaceutical QA function. ???? Key Responsibilities: • Assist with material sampling and dispensing under guidance., • Support line clearance and hygiene compliance checks., • Label and transport sampled materials as per SOPs., • Maintain basic records and area cleanliness., • Learn cGMP and SOP requirements. Level 2 – Associate, QA Operations Support ???? Summary of the Role: Responsible for performing QA-related sampling and/or releasing , dispensing activities in compliance with SOPs and regulatory requirements. Ensures proper documentation and real-time quality assurance during material handling. ???? Key Responsibilities: • Execute material sampling , releasing , dispensing as per approved procedures as needed., • Perform line clearance and ensure area readiness., • Label materials correctly and ensure segregation of sampled vs. un-sampled., • Maintain logbooks, records, and data entries accurately., • Report deviations or incidents to the coordinator promptly. Level 3 – Associate, QA Operations Support ???? Summary of the Role: Mid-level QA role with responsibility for overseeing sampling and dispensing operations. Ensures compliance, accuracy, and efficiency of all QA activities in the function. ???? Key Responsibilities: • Supervise and coordinate QA sampling releasing , dispensing as per approved procedures as needed., • Review documentation completed by associates., • Ensure timely and compliant execution of sampling plans., • Conduct training and mentoring for junior staff., • Support audits, investigations, and CAPA implementation., • Performs issuance of batch cards of Manufacturing, Coating and Packaging., • Collects samples from on floor production for further testing and retention., • Distributes testing samples to In-house Analytical , Elemental and Microbiology Labs, • Prepares In process Labels for production ,and QA samples to be provided along with the Batch Records Other Responsibilities Including Safety: • Works in a safe and responsible manner in order to create an injury-free and incident-free workplace., • Complies with all job-related safety and other training requirements., • Keeps management informed of area activities and of any significant problems. Requirements Education & Qualification: Level 1 – Associate, QA Operations Support • B.Sc. / B.Pharm. or equivalent in a science-related field., • Relevant QA experience working within a GMP and/or with GCP regulations. Level 2 – Associate, QA Operations Support • B.Sc. / B.Pharm. (required), • 1–3 years of experience in QA or related area preferred working within a GMP and/or with GCP regulations. Level 3 – Associate, QA Operations Support • B.Sc. / B.Pharm. (minimum); M.Sc. / M.Pharm. preferred, • 3–6 years of relevant QA experience working within a GMP and/or with GCP regulations. Certifications, Licenses, Credentials: • N/A Skills & Ability Level 1 – Associate, QA Operations Support • Willingness to learn and follow instructions., • Basic understanding of GMP (preferred)., • Good observational and documentation skills., • Teamwork and adaptability. Level 2 – Associate, QA Operations Support • Working knowledge of cGMP and SOPs., • Attention to detail and strong documentation habits., • Familiarity with quality systems (e.g., logbooks, traceability)., • Communication and coordination abilities Level 3 – Associate, QA Operations Support • Strong knowledge of cGMP and quality systems., • Leadership and team management skills., • Effective communication and problem-solving., • Ability to handle audits, deviations, and cross-functional coordination., • Good documentation and review capabilities. Physical Requirements (lifting, etc.): • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool., • Must be able wear all PPE including lab coat, face mask, booties, gloves, safety glasses. Work Environment (Office, Warehouse, temperature extremes, etc.): • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employee can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. shift schedule 1st shift: 7:00 AM - 3:30 PM, 2nd shift: 3:00 PM - 11:30 PM and 3rd shift: 11:00 PM - 7:30 AM 2nd shift - 3:00 PM to 11:15 PM

Job Description Job Description Date 06/25 Location 1300 Airport Road, North Brunswick NJ Title Driver Department Warehouse Reports to Manager, Warehouse FLSA (Exempt or Non-Exempt Non-Exempt Role Overview The Truck Driver will be responsible for transporting goods from one place to another using trucks. Load / unload cargo and assist in warehouse operations as needed. All functions may require use of powered industrial trucks. Areas of Responsibility • Receives products from domestic and overseas vendors, transfers, customer returns, refused shipments, and non-inventory support products., • Accurately audits and verifies all incoming quantities for entry into computerized inventory., • Performs on and off-site warehousing duties to include: the initial movement of materials to appropriate locations, effective space utilization, and material retrieval delivery, using powered industrial equipment as needed., • Performs order fulfillment duties to include reviewing and prioritizing available orders, determining stock requirements, and maintaining levels of required inventory, physically picking, and packing orders, auditing, and verifying picked orders, preparing completed orders for shipping., • Transport finished goods and raw materials over land to and from manufacturing plants or retail and distribution centers., • Inspects vehicles for mechanical items and safety issues and perform preventative maintenance., • Plans routes and meet delivery schedules., • Documents and log work/rest periods and miles spent driving and retain fuel/toll receipts., • Complies with truck driving rules and regulations (size, weight, route designations, parking, and break periods) as well as with company policies and procedures., • Maneuvers trucks into loading or unloading positions., • Collects and verifies delivery instructions., • Reports defects, accidents, or violations, • Performs shipping duties to include Locating pallets to the dock, performing dock audits, verifying driver information, loading shipments on to trucks, properly filling out and signing BOL, packaging slips, and verifying documents are matched, tracking shipments., • Ensures safety and quality standards are consistently followed, complying with all DOT regulations., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times., • Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Responsible for maintaining and storing equipment, keys, refueling the truck, gas, expenses and to notify management of any breakdowns or maintenance issues., • All drivers must be familiar with and perform a daily pre trip and post trip inspection on their truck., • Maintains proper gowning and hygiene to ensure integrity of the product as per company policies., • Works extended hours and occasional weekend overtime., • Helps on the floor to assist Material Handlers and drive the forklift both sit down and stand up as needed, • Other duties as assigned. Other Responsibilities Including Safety: • Safety shoes are required to be worn for this position., • Works in a safe and responsible manner to create an injury-free and incident-free workplace., • Complies with all job-related safety and other training requirements., • Keeps management informed of area activities and of any significant problems. Requirements Education & Qualification: • High school graduate or GED equivalent, • 2+ years in distribution/warehousing, • Minimum of one (2) year work experience in nutritionals, supplements, food or pharmaceutical manufacturing industries preferred., • Proven work experience as a truck driver. Minimum 2+ years’ commercial driving experience or driving a box truck., • Must be able to pass a physical exam., • Hands-on experience with electronic equipment and software (GPS, AVL units, CB etc.), • Ability to drive long hours and travel regularly., • Extensive knowledge of applicable truck driving rules and regulations, • No recent moving or driving violations., • Adaptability and foresight to handle unexpected situations (traffic, weather conditions etc.), • Safe driving skills (no at-fault accidents in the last 3 years, 0-3 points on a motor vehicle report, and 0-3 suspensions). Valid driver’s license Certifications, Licenses, Credentials: • Must pass CDL physical exam., • Forklift Certification Skills & Ability • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards etc., • Mechanically inclined to understand the inner workings of equipment., • Demonstrates the ability to read and write basic English in order to be able to understand the industry regulated instruction sheets., • Prior forklift driving and ticketing experience needed., • Must pass forklift certification process (both written and driving tests) Physical Requirements (lifting, etc.): • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift., • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment., • Must be able to wear all PPE including a lab coat, face mask, booties, gloves, safety glasses/goggles, and respirators. Work Environment (Office, Warehouse, temperature extremes, etc.): • Work is regularly performed inside a manufacturing environment where temperatures can be Low, moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. Job Description Acknowledgement I have read and understand the job requirements, responsibilities, and expectations set forth in the job description provided for my position. I attest that I can perform the essential job functions as outlined with or without any reasonable accommodation

Job Description Job Description Date 5/2026 Location All facilities of USPL, North Brunswick NJ Title Facilities Security Coordinator Department Facilities / Engineering Reports to Manager, engineering/Facilities FLSA (Exempt or Non-Exempt) Non -Exempt Role Overview The Facilities Security Coordinator is responsible for supporting and maintaining site security operations, access control systems, surveillance monitoring, visitor management, and security compliance activities. This role works closely with Facilities, EHS, IT, vendors, contractors, and site leadership to ensure the safety and protection of employees, visitors, company assets, and facility operations. The position is operational and facilities-oriented, focused on implementing and maintaining effective site security processes and standards. Areas of Responsibility Security Operations & Coordination: • Coordinate daily facility security operations, including site access control, visitor management, badge administration, contractor coordination, and overall security process support to maintain a safe and secure work environment., • Collaborate with Facilities, HR, EHS, IT, and Operations teams to support overall site security objectives and ensure compliance with company policies, GMP requirements, and applicable security and safety regulations., • Support overall facility operations by maintaining an organized, secure, and controlled site environment. System Monitoring: • Monitor and maintain CCTV cameras, surveillance systems, alarms, access control systems, and other site security equipment to ensure proper functionality and site security compliance., • Manage badge/access systems including badge creation, activation, deactivation, and access permissions. Coordinate visitor registration, temporary badge issuance, and compliance with site visitor procedures., • Conduct routine inspections of access points, security systems, and facility security practices to ensure effective security operations. Access Control & Visitor Management: • Manage site access control systems, including badge creation, activation, deactivation, and access permissions., • Coordinate visitor registration, temporary badge issuance, and compliance with site visitor procedures and security policies Compliance, Documentation & Audits: • Maintain security records, logs, reports, and related documentation., • Support internal and external audits related to security compliance and assist in reviewing, updating, and implementing security procedures, standards, and operational guidelines. Emergency Response: • Support emergency response activities, incident reporting, investigations, follow-up corrective actions, evacuation procedures, and site protection protocols., • Respond to security-related issues, emergencies, and operational concerns as needed while coordinating with internal departments and external emergency services when required., • Assist in implementing and maintaining emergency response procedures and security contingency plans. Staff Leadership: • Coordinate with vendors, contractors, and service providers for security-related maintenance, support, and operational activities., • Support implementation, review, and continuous improvement of security procedures, standards, operational guidelines, and compliance-related activities., • Maintain security records, logs, reports, and related documentation while supporting internal and external security audits. Requirements Education & Qualification: • Associate degree or equivalent experience in Facilities, Security Administration, Criminal Justice, Business Administration, or a related field preferred., • Minimum 2–5 years of experience in facility security, access control, facilities coordination, or related operational security roles., • Experience working with CCTV systems, badge/access control systems, and visitor management platforms preferred., • Strong organizational, documentation, and recordkeeping skills., • Ability to handle sensitive and confidential information professionally., • Strong communication and coordination skills., • Proficient in Microsoft Office applications and security management software., • Ability to respond effectively during emergencies and high-priority situations., • Knowledge of security procedures, incident reporting, and facility operations preferred. Certifications, Licenses, Credentials: • OSHA Safety Training Certification (General Industry or Construction Safety awareness preferred), • Access Control / Security Systems Training Certification (CCTV, or similar systems preferred), • Incident Investigation or Workplace Security Training Certification (preferred). Skills & Ability • Strong knowledge of facility security operations, access control, and surveillance systems, • Ability to monitor, analyze, and respond to CCTV, alarm, and security system alerts, • Skilled in managing badge/access control systems and visitor management processes, • Strong incident reporting, investigation, and documentation skills, • Ability to respond effectively to emergency situations and coordinate evacuation or response procedures, • Strong coordination skills with Facilities, HR, EHS, IT, vendors, and contractors, • Ability to conduct inspections, audits, and identify security risks or gaps, • Strong attention to detail and ability to maintain accurate security records and logs, • Effective communication skills (verbal and written) for reporting and coordination, • Ability to enforce security policies, procedures, and compliance requirements consistently, • Strong organizational and multitasking skills in a fast-paced operational environment, • Ability to work independently and make sound decisions under pressure, • Proficiency in Microsoft Office and security management systems/software, • Strong problem-solving skills related to facility security and operational issues, • Ability to maintain confidentiality and handle sensitive security information appropriately Physical Requirements (lifting, etc.): • Ability to walk and stand for extended periods while conducting facility inspections and security rounds, • Frequent mobility throughout manufacturing, warehouse, laboratory, and office environments, • Ability to monitor multiple facility areas, including indoor and outdoor security points, • Occasional lifting and carrying of equipment or materials up to 25–50 lbs as needed, • Ability to climb stairs and access elevated or restricted areas when required for inspections or emergencies, • Ability to operate security equipment, access control systems, and monitoring devices, • Ability to respond quickly to alarms, emergencies, or urgent security situations across the site, • Ability to work in varying environmental conditions (noise, temperature variations, industrial settings), • Ability to sit for extended periods while monitoring CCTV and security systems, • Ability to wear required personal protective equipment (PPE) as needed in designated areas, • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must be able to wear all PPE including a lab coat, face mask, booties, gloves, safety glasses/goggles, and respirators. Work Environment (Office, Warehouse, temperature extremes, etc.): • Work is regularly performed inside a office/reception area and will require going to manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employee can be exposed daily to chemicals and cleaning agents. May occasionally work on the outside of the building, on the grounds, in parking areas, or on the roof during all seasons. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. Job Description Acknowledgement I have read and understand the job requirements, responsibilities, and expectations set forth in the job description provided for my position. I attest that I can perform the essential job functions as outlined with or without any reasonable accommodations.

Job Description Job Description Date 01/2024 Location 1200 Airport Road, North Brunswick NJ Title Senior, Microbiologist Department Quality Control Reports to Manager, Quality Control Microbiology FLSA (Exempt or Non-Exempt Exempt Role Overview The Senior Microbiologist performs compendial, published / customer provided methods and rapid microbial methods (using Biolumix / Soleris systems) for enumeration testing of finished products and raw materials. Also, create & execute the validation and suitability protocols for developed methods as per USP & ISO guidelines so that methods can be used for routine analysis in microbiology lab. The duties and responsibilities described for each level are not limited to those outlined and are not intended to be a comprehensive list of all activities, functions, or responsibilities required of the position. Management reserves the right to modify, assign, or reassign duties and responsibilities at any time based on business needs. Areas of Responsibility • Under the supervision of Quality Control Microbiology Manager and Lead Microbiologist, carry out activities in support of developing new methods for enumeration of probiotic strains, methods suitability of dietary supplement products using rapid and conventional techniques., • Creation of method validation/verification protocol for new methods for enumeration and contaminants estimation., • Perform USP water sampling and testing using rapid micro technology & USP methodology., • Perform identification of microorganisms as per USP general chapters / AOAC published method., • Perform enumeration, non-lactic bacteria and microbial contaminants testing in the raw materials, finished products and stability samples, for routine samples., • Media preparation & Growth promotion testing to be performed for new method development / verification., • Maintain notebooks & lab records within GMP standards and as per USPL SOPs & guidelines. Accurately report results and provide detailed records of results and conclusions., • Assist in creating protocol for Soleris rapid micro system method suitability., • Assist other microbiologists, as necessary, for timely project completion and support other lab personnel as required., • Comply with Health, Safety and Environmental responsibilities for the position., • Train newly joined microbiologist to perform testing for enumerations of probiotics and to perform routine tests for TAC, YM, pathogens using rapid microbial techniques of Neogen Soleris system and USP conventional methods., • ATCC Culture identification and population verifications., • Performs transactions for sample entry and results recording., • Follow all the USPL SOPs to work in the microbiology lab, including gowning, safety, waste disposal of Biohazard materials, and general written guidelines., • Recognizes OOS or out of-trend and, under the direction of QC management, assists in lab investigations., • Documentation of generated microbial lab related data as per GDP and recovery of stored documents within stipulated time during GMP audits or requested by customer., • Complies with all regulatory/ in-house requirements (may include but not be limited to safety, housekeeping, laboratory chemical waste, cGMP, GLP, and documentation) when performing the assigned activity., • Must be able to work extended hours as needed and occasional weekends., • Other duties and responsibilities as assigned by QC management. Other Responsibilities Including Safety: • Works in a safe and responsible manner to create an injury-free and incident-free workplace., • Complies with all job-related safety and other training requirements., • Keeps management informed of area activities and of any significant problems. Requirements Education & Qualification: • MS in Microbiology or microbiology related scientific disciplines., • 5+ years in microbiology laboratory techniques, • Minimum of 5 years QC lab work experience with industry experience in dietary supplements, food, or OTC manufacturing. Certifications, Licenses, Credentials: • N/A Skills & Ability • Ability to maintain integrity and honesty at all times and to communicate with transparency., • Ability to work independently or as part of a team., • Solid understanding of cGMP’s and GLP and is familiar with 21 CFR Part 11, • Strong working knowledge of Microsoft Word, Excel., • Good documentation practice and able to write simple, clear reports., • Meets commitments on time and practices time-management skills., • Seeks to identify continuous improvement needs., • Experience with rapid microbial testing procedures is an advantage. Physical Requirements (lifting, etc.): • Ability to navigate office, lab, and/or plant floor working environments., • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances and leaning over equipment as well as kneeling on the floor to clean under the equipment., • Must be able to wear all PPE including a lab coat, face mask, booties, gloves, safety glasses/goggles, and respirators., • On occasion may need to lift up to 20lbs. Work Environment (Office, Warehouse, temperature extremes, etc.): • Work is regularly performed inside a laboratory environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents., • May execute up to 20% of their work at the bench level either standing or sitting on a stool., • Work performed in a standard office environment is without unpleasant or hazardous conditions. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. Job Description Acknowledgement I have read and understand the job requirements, responsibilities, and expectations set forth in the job description provided for my position. I attest that I can perform the essential job functions as outlined with or without any reasonable accommodation.

Job Description Job Title: Registered Dental Assistant Department: Operations Reports to: Dental Practice Manager FLSA Status: Non-Exempt Company Overview ProSmile is the fastest growing dental organization on the East Coast and Midwest. Our premier DSO is led by world class dentists who understand what highly skilled dentists and dental professionals need to grow a practice while focusing on delivering the best-in-class clinical care to their patients. We offer up-to-date equipment and technology, experienced and friendly staff, and dentists who truly care about their patients, as well as competitive pay and, where applicable, a benefits package that includes medical, dental, vision, 401(k), training, and career growth opportunities. Position Summary As a Registered Dental Assistant, you will help support the clinical needs of our patients and doctors. The duties of a Dental Assistant are very important for the functionality of our dental offices. These duties can include patient care, recordkeeping, and appointment scheduling. As a Registered Dental Assistant, you will work under the supervision of dentists and work closely with dental hygienists in their day-to-day activities. Duties and Responsibilities The duties include, but are not limited to: • Clearly demonstrate knowledge of dental instruments and assist the dentist in rendering patient care chairside., • Maintaining inventory control in the operatories where treatment is rendered by the Provider, • Adhering to OSHA, HIPAA, and CDC guidelines, • Deliver world class patient interactions related to scheduling, follow up treatment, post-surgical information and record keeping, • Be able to perform basic lab procedures such as taking impressions, pour models, and preparing cases for external labs., • Remove excess cement from crowns or other restorations and orthodontic appliances;, • Fabricate and cement temporary crowns and bridges after preparation of tooth (teeth) by a dentist., • Placing and removing rubber dam and clamp., • This does not include intra-oral occlusal adjustment;, • Trial size (pre-select) orthodontic bands, wires, stainless steel crowns and temporary crowns intra-orally or on diagnostic models;, • Place and remove arch wires and ligature wires, • Remaining items that are within the scope of Registered Dental assistant., • Maintaining public area appearance, • Performs miscellaneous job-related duties as assignedQualifications, • High School diploma or GED required, • Easily able to learn new technologies and systems required and demonstrates a desire to learn, • Applicable licensing required for the state in which you will work: Dental Radiologic Technologist (DRT) license or willing to pursue licensure immediately required., • Certified Dental Assistant certificate preferred, • Registered Dental Assistant License preferred, • 1+ years work experience as a Dental Assistant preferred, • Ability to work in a fast-paced environment, • Requires some flexibility in scheduling, such as the ability to work evenings and weekends as needed, • X-ray License required, • Current NJ Registered Dental Assistant license, • Active CPR Certification is required.Knowledge and Skills/Expected Competencies, • Knowledge of dental instruments and patient care., • Ability to clearly communicate medical information to professional practitioners and/or the general public., • Excellent organization, prioritization, follow up, analytical and time management skills with ability to handle multiple priorities and deadlines. Benefits Summary At ProSmile, we are committed to supporting the health and well-being of our employees and their families. We offer the following benefits for Full Time Benefits Eligible Positions (35+ hours per week) and Part Time Benefits Eligible Positions (30-35 hours per week): • Medical Insurance: Choice of five comprehensive Aetna medical plans, including options with low copays, deductible-sharing, and national provider networks., • Dental Insurance: MetLife plans offering preventative, basic, major, and orthodontic coverage options., • Vision Insurance: Davis and UHC vision plans with annual exams, eyewear allowances, and contact lens benefits., • Flexible Spending & Health Savings Accounts: Pre-tax savings accounts for medical, dependent care, and healthcare expenses., • Life & Disability Insurance: Employer-paid basic life and AD&D insurance, with voluntary life, short-term, and long-term disability plans., • Additional Perks:, • Employee Assistance Program (EAP), • Identity Theft & Fraud Protection, • Legal Support Services, • Discount Programs (including pet insurance, travel, theme parks, electronics, etc.), • Wellness Programs, • Financial Wellness and Planning Tools, • Eligible Dental Assistant team members may also have access to company-supported reimbursement for certain licenses and certifications, subject to role eligibility and company guidelines. Physical/Mental Demands and Work Environment The physical demands described are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, walk and use hands and arms to operate general office equipment (PC, telephone, file cabinets, copier, fax machine and printer). The employee may occasionally lift and/or move between 10 and 25 pounds. Specific vision abilities required by this job include close vision and ability to adjust focus. The employee may need to travel to healthcare practices. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The noise level in the work environment is usually low to moderate. The Company reserves the right to modify the job description based upon its needs and may require the employee to perform functions beyond those mentioned above. Neither this job description nor any other communication creates an employment contract between the Company and the employee. Equal Employment Our culture encourages individual development, embraces an inclusive environment, rewards innovative excellence, and leads in provider and patient satisfaction. Prosmile values diversity, inclusion, and equity as matters of fairness and effectiveness. We are committed to hiring and retaining a staff that reflects the diversity of the communities we serve, fostering an inclusive working environment where staff of all backgrounds feel welcomed and engaged. ProSmile is an Equal Opportunity Employer and encourages applications from individuals underrepresented in the medical sector, including people of color, and persons with non-traditional work and educational experience. All who believe they meet the stated qualifications are invited to apply. Company Safety We believe that the best care for our patients starts with the best care for our employees. ProSmile is committed to proactively creating and maintaining an environment that is safe for our team and patients. Employees are required to wear Personal Protective Equipment (PPE) including face masks, gloves, gowns, and more as needed and in accordance with CDC standards. Powered by JazzHR WugdOHTQ9t

What if the next project you run is the one that takes a breakthrough material from the lab to the factory floor, at the scale that makes it real? This is the senior project manager who turns a first-to-market technology into product across a fast-growing manufacturing network.Pave Talent is hiring

Job Description Job Description Date 03/2018 Location 1300 Airport Road, North Brunswick NJ Title Supervisor, Warehouse Department Warehouse Reports to Manager, Warehouse FLSA (Exempt or Non-Exempt Non-Exempt Role Overview This position is responsible for planning, coordinating, and managing all activities of those employees on the warehouse floor. In addition, the Warehouse Supervisor is responsible for supervising warehouse specialists, order pickers and forklift operators. The Warehouse Supervisor will support the Receiving Clerk in managing the daily freight schedule based on customer and inventory needs. Safety, sanitation, housekeeping, GMP standards, problem solving ability as well as good employee relations are considered key elements to success. They will need to coordinate and partner with other departments to maintain schedules and effect necessary changes and revisions. Areas of Responsibility Warehouse • Ensures that timelines are met by distributing workload in accordance with changing priorities., • Ensures operation of equipment by coordinating, preventative maintenance, repairs; and evaluating new equipment and techniques, • Evaluates/solves production problems by reviewing the area of concern, developing potential solutions, technically evaluating, or testing the solutions, and preparing recommendations for management., • Maintain a work environment which fosters teamwork and supports the company’s efforts to continuously improve processes., • Prepares production reports and variance explanations, and accurately complies and files, Inventories, and order production supplies, • Interacts with multiple functions and shifts within the operation Quality • Participate in any investigation for a deviation involving a batch record., • Maintain proper gowning and hygiene to ensure integrity of the product as per cGMP’s and company policies., • Follow batch records, SOP’s, and cGMP guidelines to ensure product specifications and tolerances are met., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOPs at all times., • Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Complete necessary Activity Reports for management., • Monitor the flow of paperwork from Receiving to Inventory Control Specialist for timely data entry., • Resolve discrepancies with shipping, invoices, packing slips, and receiver reports., • Ensure products are staged for counting and inspection., • Ensure products are stored properly to conserve space and comply with safety procedures., • Oversee the rotation of inventories within the warehouse. People • Foster a collaborative environment in which diverse backgrounds are respected and valued., • Establish and maintain effective relationship with your peers, team, and senior managers in order to communicate effectively., • Provides clear direction & expectations for direct reports and assures that tasks & responsibilities are clear., • Sets goals and objectives in alignment with the organization for self and direct reports: Creates action plans, sets milestones, and delivers progress reports and developmental plans for team members., • Develop employees that contribute to the daily success of the line and can be successful in the supervisor’s absence., • Maintains open lines of communication with employees, peers, and management., • Assumes responsibility for the efficient, timely, and accurate completion of warehouse functions, • Learns and understands specific manufacturing operations sufficiently and is able to provide support in other areas as needed., • Evaluates performance of employees and creating corrective action plans where appropriate., • Assists with personnel decisions including hiring, terminations, attendance management, wage decisions, transfers, and promotions., • Interpret and explain the policies of the USPL Handbook so employees can understand the application of each policy as well as management’s purpose for each policy., • Apply all company policies fairly and consistently across departments and develop a relationship of trust and transparency with their employees., • Identify strengths and weaknesses of all associates on their team to ensure optimal performance; knows which employees they can assign additional tasks to and which need closer scrutiny. Other Responsibilities Including Safety: • Works in a safe and responsible manner to create an injury-free and incident-free workplace., • Complies with all job-related safety and other training requirements., • Responsible for ensuring each employee works in a safe and responsible manner in order to create an injury-free and incident-free workplace. Complies with all job-related safety and other training requirements., • Keeps management informed of area activities and of any significant problems., • Responsible for maintenance of warehouse equipment, providing both preventive maintenance programs and communicating all necessary repairs to Director of Facilities. Ensure that the warehouse personnel have safe, efficient equipment in order to perform the distribution functions, • Responsible for warehouse safety programs in order to provide a safe and clean workplace for employees and within the regulations of all OSHA local and state regulations. Ensure all associates are trained and following all standard operating procedures. Other duties as assigned Requirements Education & Qualification: • High school graduate or GED equivalent; BA degree preferred, • 7+ years Supervisory experience, • Minimum of four (4) years of work experience in nutritionals, supplements, food, or pharmaceutical manufacturing industries; 2+ years in distribution/warehousing Certifications, Licenses, Credentials: • · Valid driver’s license Skills & Ability • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards, etc., • Mechanically inclined to understand the inner workings of the equipment., • Demonstrates the ability to read and write basic English to be able to understand the industry-regulated instruction sheets., • Must have attention to detail. Physical Requirements (lifting, etc.): • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift, • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment., • Must be able to wear all PPE including a lab coat, face mask, booties, gloves, safety glasses/goggles, and respirators. Work Environment (Office, Warehouse, temperature extremes, etc.): • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. 2nd shift - 3:00 pm to 11:30 pm

Job DescriptionBenefits: • Sales Commissions, • Bonus based on performance, • Opportunity for advancement, • Training & development StretchLab is currently seeking a high energy, passion filled and sales motivated individual that is fitness minded and has a love for community and our brand! Founded in 2015 in Venice, California, StretchLab is the industry leader in offering one-on-one assisted stretching. With Co-Founders coming from the Personal Training industry, Stretch Lab has created a variety of offerings to empower clients to Live Long. StretchLab has gathered a team of experts already certified in an array of related fields physical therapy, chiropractic medicine, yoga, Pilates, and more and brought in the worlds leading authority on stretching and flexibility to deliver on the promise of having the finest team of stretching professionals gathered anywhere. StretchLabs proprietary Flexologist training ensures that their clients receive a world class stretching session. POSITION: The purpose of the Sales Associate is to assist the General/Sales Manager with new membership sales by bringing new members to the studio and booking them into an intro stretch. The Sales Representative also assists with retaining current members. Fitness knowledge or background is preferred but not required. REQUIREMENTS: • Excellent sales, communication, and customer service skills required, • Goal-oriented with an ability to achieve sales in memberships for one-on-one and group assisted stretch and retail, • Ability to learn and use a CRM software system, • Ability to stand or sit for up to 8 hours throughout the workday, • Must be fluent in English and have excellent communication skills via in person, phone and email, • Must be able to work under pressure and meet tight deadlines, • Must have proficient computer skillsRESPONSIBILITIES:, • Assist the General/Sales Manager with the sales process of lead generation, follow up, and close, • Comfortable with prospecting through lead management via calling, texting, and emailing, • Comfortable working independently and unsupervised at times, • Book and confirm stretches, • Manage the front desk to greet and check-in clients and prospects when they enter the studio, • Conduct tours of the facility while establishing a relationship and targeting individuals needs and wants, • Maintain acceptable level of personal sales production, • Emphasize and enforce objectives of the club as a fitness and wellness provider, • Present available services to current or prospective members, • Book quality appointments to achieve monthly sales quota and follow-up with leads and missed intro classes, • Participate in special events (health fairs, grand openings, marathons, and community and hospital events) to promote the club, • Ensure studio is clean and tidy, • Other duties as assignedCOMPENSATION & PERKS:, • Competitive compensation based on experience, • Free or discounted memberships, • Commission paid on sales, • Opportunity for bonus based on performance., • Huge opportunities for growth within the studios, including additional sales and management opportunities

Posting SummaryRutgers, The State University of New Jersey, is seeking a Research Teaching Specialist V for the department of Pharmacology at the Robert Wood Johnson Medical School. Under the direction of the PI, Lab Manager or Research Teaching Specialist V, performs research activities relative to

Collaborates with Nurse Manager and Educator to promote staff development and assure optimal patient outcomes. Penn Medicine Princeton Health (PMPH) is seeking a full-time Assistant Nurse Manager (ANM) to work the day shift within the Cardiac Cath Lab. Responsible for the day to day managerial funct

Collaborate with OEM partner teams to understand trends and keep Lab updated with latest devices and solutions. The Business Development Manager - Next Gen Device Lab supports sales representatives by providing product support and program information, driving business growth for specific OEM partner

Clinical Lab Data Manager (Lab Normal Ranges). This role is responsible for management of local lab reference ranges, supporting their portfolio which includes loading of Lab Normal Ranges (LNR) within the EDC system and management of LNR issue tracking and health status of a particular lab, site or

If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and d

Insight Global is looking for a Project Manager to help support one of our large pharmaceutical clients, specifically to support their CAR-T Manufacturing organization.

CDM Smith (Industrial Division) is seeking to fill an exciting Substation Project Manager (Substation PM) position in our established and growing business supporting electric utility and substation clients across the United States. As an integral member of our dynamic Industrial Team, the Substation

Supports Pharmacy Manager with diversion monitoring and reports any concerns that would compromise the security of the pharmacy to the Pharmacy Manager. Assists and supports Store Manager and Pharmacy Manager in analyzing and seeking to improve pharmacy financials, operational quality and customer s

Through collaboration with your General Manager and/or Assistant General Manager, you will teach and coach behaviors to Leads, Experts and Brand Associates to cultivate a high performing team to deliver a best-in-class experience to our customers. Assistant Manager, Customer Operations - Somerset S/

Pay: Department Manager General Merchandise pay range $20. Get paid sooner! Daily Pay earned wage access is available to all store employees. Department Manager General Merchandise.

Assistant General manager, Shift Managers and Crew Members how to do it right, and make sure every shift is better than the last. Taco Bell Assistant General Manager. Assistant General Manager is in charge of all people and operations for a Taco Bell restaurant.

The Rutgers Democracy Lab (RDL) was established through a transformative gift received in November 2024. Its mission is to serve as a vibrant hub for civic engagement and a collaborative workshop for studying, analyzing, and addressing the challenges and opportunities of contemporary democracy. The

Project Manager (Construction Team). A well-established real estate firm headquartered in Warren; NJ is seeking an experienced Project Manager (Construction) to join their team. Outstanding work ethic and a team player who enjoys working in a collaborative environment.

Build and improve operational processes that support scalable company growth. Handle recruiting and staffing needs, including hiring technicians and coordinating with day labor vendors/agencies.

Assistant Project Manager or Project Manager Required .

Collaborate with leadership to drive operational growth and profitability. Supportive and collaborative work environment.

Are you a Senior Level Strategic Project Manager looking to join an amazing organization and culture?!. Provide feedback, advice, project updates and mentorship to project managers. Collaboration with various departments to ensure seamless project execution.

Assists and supports Store Manager and Pharmacy Manager in analyzing and seeking to improve pharmacy financials, operational quality and customer service. In collaboration with Pharmacy Manager, responsible for recordkeeping and ensuring security safeguards are in-place. Supports Pharmacy Manager wi

Financial Services - Customer Tax Operations and Reporting - Senior Manager.

At Bloom, we thrive on collaboration, bold thinking, and relentless innovation. Operations Manager is responsible for the end-to-end operation, maintenance, and service execution of Bloom Energy’s Solid Oxide Fuel Cell installations at customer sites. Collaborate with Remote Monitoring and Enginee

Thebuildersagc is seeking an Operations Area Manager in New Brunswick, NJ to manage day-to-day repair and maintenance operations for the university's buildings.