Laser jobs in Elizabeth, New JerseyCreate job alerts

Job Title: Cardiac Cath Lab Registered Nurse (RN), On Call Required Location: Cooperman Barnabas Medical Ctr Department Name: Cardiac Catheter Lab Req #: 0000233437 Status: Hourly Shift: Day Pay Range: $47.85 — $64.04 per hour Pay Transparency: The above reflects the anticipated hourly wage range for this position if hired to work in New Jersey. The compensation offered to the candidate selected for the position will depend on several factors, including the candidate's educational background, skills and professional experience. Job Overview: As a Cardiac Catheterization Lab Registered Nurse (CCL RN), you will assist physicians and allied healthcare staff in performing a variety of diagnostic and interventional cardiac/endovascular, EP, Vascular and structural procedures. You will utilize knowledge of pathophysiology to ensure patients are prepared/educated/supported during procedures, whether monitoring, circulating, or assisting with scrub procedures. As a Cardiac Cath. Lab Registered Nurse, you will be responsible for TEE, CV, tilt table tests, ILR procedures, as well as pre- and post-care of patients, including admissions, discharges and transfers. Cooperman Barnabas Medical Center (CBMC) Catheterization Lab specializes in cardiac catheter, vascular, neurovascular (stroke) and structural heart procedures, as well as electrophysiology. Procedures performed in the Cath lab include the following: left and right heart catheterizations along with percutaneous intervention as necessary, intracoronary ultrasound, rotational atherectomy, balloon pump insertion, Impella insertion, left atrial appendage closure, catheter-directed thrombolysis for pulmonary embolization, structural procedures (TAVR, Mitra Clip), neurovascular cerebral angiograms, stroke treatment, carotid stenting, treatment of cerebral aneurysms with coiling and pipeline interventions, peripheral and renal angiograms with intervention as necessary, Watchmen, CardioMEMs, and Electrophysiology (cardiac devices, ablations, PVI’s, laser lead extractions). Qualifications: • Cath Lab experience is strongly preferred., • A minimum of 2 years of critical care experience is required., • Telemetry experience required., • Strong critical thinking/assessment skills., • Must be I.V. certified from an approved facility or complete the requirements for I.V. certification within 90 days of hire to the unit., • Completion of all orientation requirements of Cooperman Barnabas Medical Center., • Current and active New Jersey RN licensure is required., • Baccalaureate Degree or Associate Degree in Nursing, • American Heart Association Basic Life Support Certification (BLS) upon hire, • Day Shift, 12.5-Hour Shift, • 8A-9P, • The Registered Nurse provides nursing care in the health care system within the scope of practice defined by the Nurse Practice Act and regulatory standards, and assures awareness of ethical standards of practice as defined by the ANA code of ethics., • The Registered Nurse assures safety in practice and is inclusive of the principles of evidence-based practice by maintaining a realization of their own individual level of knowledge and experience, and assumes responsibility for advancing knowledge of self and others in the patient care team by communicating with and utilizing resource persons and programs available., • The Registered Nurse is responsible for reporting identified safety issues, such as hazardous environments (i.e., damaged floors/walls/ceiling tiles/unsecured areas) and medical errors., • The Registered Nurse is responsible for knowledge of the patient population served., • The Registered Nurse is responsible for supervising and directing the delegation of tasks to appropriate team members and collaborating with other patient care providers., • The Registered Nurse is responsible for consistently setting and evaluating priorities through appropriate interventions with measurable outcomes toward improvement. Benefits and Perks: At RWJBarnabas Health, our employees are at the heart of everything we do. Driven by our Total Wellbeing promise, our market-competitive offerings include comprehensive benefits and resources to support our employees’ physical, emotional, financial, personal, career, and community wellbeing. These benefits and resources include, but are not limited to: • Paid Time Off, including Vacation, Holidays, and Sick Time, • Retirement Plans, • Medical and Prescription Drug Insurance, • Dental and Vision Insurance, • Disability and Life Insurance, • Paid Parental Leave, • Tuition Reimbursement, • Student Loan Planning Support, • Flexible Spending Accounts, • Wellness Programs, • Voluntary Benefits (e.g., Pet Insurance), • Community and Volunteer Opportunities RWJBarnabas Health is the premier healthcare destination providing patient-centered facilities, high-quality academic medicine compassionately and equitably, while delivering best-in-class work experience for every member of the team. We honor and appreciate the privilege of creating and sustaining healthier communities, one person and one community at a time. As the leading academic health system in New Jersey, we develop and implement innovative strategies for high-quality patient care, education, and research that address both the clinical and social determinants of health. RWJBarnabas Health aims to truly have a unique impact on local communities throughout New Jersey. From vastly improving the health of local residents to creating educational and career opportunities, this combination greatly benefits the state. We understand the growing and evolving needs of residents in New Jersey—whether that be enhancing the coordination for treating complex health conditions or improving community health through local programs and education.

About the Company: At Lincoln Electric Products Co., Inc., we specialize in the design, manufacture, and distribution of custom equipment tailored to meet the specific applications and requirements of our customers. Our product range includes: • Panelboards: Up to 2000A, • Service and Distribution Switchboards: Up to 8000A, • Generator Connection Boxes, • Generator Output Switchboards, • Single and Double-Ended Substations We pride ourselves on delivering high-quality, custom-designed solutions that address the unique needs of our clients across various industries. We are in search of a Manufacturing Engineer. The ideal candidate possesses both a high level of technical expertise and an innate passion to build. You will play a critical role in creating and refining processes to improve manufacturing safety, quality, and productivity. Responsibilities • Develop and improve manufacturing processes for the assembly of panelboards, switchgear, bus systems, wiring harnesses, and control panels., • Create and maintain work instructions, assembly procedures, process flows, and manufacturing documentation., • Support design-for-manufacturability (DFM) and collaborate with Engineering on new product introductions (NPI)., • Analyze production workflows to identify bottlenecks and implement process improvements., • Develop and maintain BOM accuracy, routings, labor standards, and production fixtures., • Implement lean manufacturing practices, including 5S, Kaizen events, standardized work, and waste reduction., • Troubleshoot manufacturing issues, including electrical assembly, wiring, bus bar fabrication, and enclosure modifications., • Evaluate and specify tools, equipment, jigs, and fixtures required for efficient assembly., • Support quality assurance activities such as root-cause analysis (RCA), corrective actions (CAPA), and continuous improvement., • Train production personnel on updated processes, tools, and best practices., • Collaborate with suppliers to improve material quality and manufacturability., • Ensure compliance with UL, NEC, OSHA, and company safety standards. Qualifications Required • Bachelor’s degree in Electrical Engineering, Mechanical Engineering, Industrial Engineering, or related field., • 3+ years of experience in manufacturing engineering, preferably in electrical equipment, switchgear, panelboards, or industrial equipment assembly., • Strong understanding of electrical components: breakers, contactors, relays, transformers, bus bars, metering devices, and control wiring., • Experience reading and interpreting electrical schematics, one-lines, wiring diagrams, and mechanical drawings., • Proficiency with CAD tools (AutoCAD, SolidWorks, or similar)., • Hands-on experience with Lean Manufacturing and continuous improvement., • Experience with UL508A, UL67, UL891, and NEC standards., • Knowledge of ERP/MRP systems for BOMs and routings., • Experience in a high-mix, low-volume manufacturing environment., • Knowledge of CNC fabrication, punch/laser processes, or enclosure manufacturing

In this role, you can expect to work with systems including digital computers, fiber optics, infrared detection, radar, laser electronics, navigation, pressure indication, and electrical power generation and distribution. Performing micro-miniature module repair on computer circuit cards. AT applica

Job details: Scientist (materials science, raw material characterization, hplc, gc, ms, ftir, xrd, laser diffraction, etc.) Global Pharmaceutical Company Long Term Contract (ongoing, no end date) Pay up to $39/hr • BS or MS with few years of experience, • Raw Material Characterization experience with solid technical knowledge on physical testing, particle morphology and polymorphic screening such as (Density, Sieve Analysis, Laser Diffraction (Malvern), Scanning Electron Microscope (SEM), Powder Flow, X-Ray Diffraction, DSC and TGA);, • Ability to execute compendial testing with minimal guidance., • Author technical reports used by cross-functional partners., • Well organized and able to execute across multiple parallel workstreams with competing priorities., • Ability to execute against challenging deadlines., • Preferred but not required: Chromatography (HPLC, SEC/GPC, GC, IC), Spectroscopy (FTIR, Raman and MS).

Commercial and personal line insurance carriers rely on EXL as a key business partner through our Castle High Value and EXL Risk Control service offerings. We offer a variety of field inspections and risk control services to support our clients’ underwriting processes. EXL’s consultants deliver industry-leading professionalism, quality and turn-around time, and our innovative solutions help our clients keep ahead of the competition. ___ Job Description EXL Risk Control is looking for self-directed independent contractors who possess excellent communication skills, computer proficiency, and a commitment to meeting client quality and timeliness standards. You will work from your own home or office, and service onsite survey/inspection assignments in the Staten Island, NY area, and other locations within approximately 20 miles of Staten Island. Responsibilities You will be responsible for scheduling on-site surveys and providing risk control reports to insurance industry clients. These reports contain information necessary to underwrite a commercial insurance policy and may include recommendations to control and/or correct potential loss producing conditions associated with that policy. You will be expected to manage assignments you accept, successfully secure customer appointments within a local territory and complete work assignments on time. Our Risk Control Inspectors evaluate businesses behind the scenes to identify hazards and improve safety, mitigating risks for our insurance company clients. The type of businesses we survey are commercial operations, including retail, restaurants, hotels, apartments, construction jobsites, churches, schools, etc. Most surveys are focused on assessing the business for Property and General Liability coverage, but we also service other commercial insurance lines of business including Workers Compensation, Auto/Fleet, Products Liability, Inland Marine and Builders Risk. Qualifications Preferred experience in commercial insurance, real estate, inspection, construction, claim, loss control, underwriting, and/or fire and safety experience is a plus, but all interested candidates are encouraged to submit their qualifications. In lieu of experience, we can refer you to a 15-hour online certification option to qualify you. Fees are negotiable depending on experience and the unique aspects of selected jobs. Tools or Items You Must Provide: • Digital camera or tablet, • Computer, • Printer, • High speed internet access, • Reliable vehicle, • Measuring device such as a laser, 100 ft. tape, or measuring wheel, • Auto and General Liability Insurance All interested candidates are encouraged to apply.

Physician (MD/DO) – Aesthetic Laser Specialist, Urban Aesthetic Med Spa Part-Time | Onsite | Jersey City, NJ ABOUT URBAN AESTHETIC MED SPA Urban Aesthetic Med Spa is a leading medical-grade aesthetic clinic in Jersey City dedicated to enhancing natural beauty with safe, effective, personalized treatments. We combine advanced technology and clinical expertise to deliver exceptional patient experiences and results that boost confidence and wellbeing. POSITION SUMMARY We are seeking a board-certified Physician (MD/DO) with expertise in aesthetic laser treatments to help implement and lead our laser services. The ideal physician will administer laser procedures with precision, guide clinical decision-making, educate patients, and ensure high standards of care and safety. You will work collaboratively with our clinical and support teams to deliver best-in-class aesthetic results. KEY RESPONSIBILITIES • Perform comprehensive patient evaluations and consults for laser services, • Deliver laser hair removal treatments using advanced platforms tailored to skin type and goals, ensuring patient comfort and optimal outcomes, • Administer laser skin resurfacing and rejuvenation procedures to improve texture, tone, fine lines, and overall skin quality through controlled laser energy, • Oversee pre- and post-treatment patient care, including safety protocols, preparation, aftercare, and follow-ups, • Maintain accurate documentation of clinical assessments and procedures, • Educate patients on available procedures, expected outcomes, risks, and best-practice aftercare, • Collaborate with the clinical team on treatment plans and quality improvement initiatives, • Uphold the highest standards of patient safety and infection control QUALIFICATIONS & REQUIREMENTS • Active and unrestricted MD or DO medical license in New Jersey, • Board certification in a relevant medical specialty (Dermatology, Plastic Surgery, or Family/General Medicine with aesthetic experience preferred), • Proven experience performing laser hair removal, skin resurfacing, and other laser-based aesthetic procedures, • Deep understanding of laser physics, patient selection, and safety protocols, • Excellent patient communication and consultation skills, • Professional, patient-focused, and detail-oriented approach WHY CHOOSE URBAN AESTHETIC MED SPA • Work with state-of-the-art laser technology in a respected med spa environment, • Competitive compensation with opportunities for performance-based growth, • Collaborative clinical culture with a focus on patient outcomes and professional development, • Support from a high-quality team dedicated to excellence in aesthetic care

Job DescriptionFounded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better.Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: · Performs expert level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to locate root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing machine tools. · Identifies and sources parts, supplies and repair items as necessary. Performs evaluations of alternatives to improve cost and / or reliability of equipment. · Independently performs maintenance as per industry standards. · Works with Planner Scheduler to optimize preventative maintenance procedures. · May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. · Complies with 5S and housekeeping standards. · Leads, drives and participates in CI activities--processes, results and cost savings using CI tools and methodology. · Provides assistance to lower level technicians and leadership to project teams. Performs expert functions as a part of training and development. · Troubleshoots and analyzes complex control systems to resolve in-depth software/ hardware and configuration problems. · Utilizes predictive maintenance technologies to collect equipment performance data. Observes trends and makes recommendations. · Updates records and reviews CMMS history and analyzes data. · Completes and conducts on-the-job training and technical self-study programs for career development. · Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: · High School Graduate or equivalent (GED). · Associates degree with a Technical focus and 5 years of related experience in specific industry; or, 7 years of experience in specific industry. · Experience in predictive technologies, precision alignments, and general maintenance of applicable process equipment. · Understands electrical, mechanical, fluid power and control systems. Can analyze the problem, synthesize alternative solutions, and perform repairs. · Must be able to use basic hand tools and specialized tools as appropriate. · Experience in vibration analysis or laser interferometer operations, precision alignments, and maintenance of applicable process equipment. · May be required to travel. Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market leading benefit programs including Medical, Dental and Vision plans, PTO, a 401k retirement plans with employer matching, tuition reimbursement, and more. Pay Range$40.11—$51.32 USDATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here.ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here.

Title: Maker Mentor I Department: Makerspace Reports To: NCE Executive Director of Experiential Learning Position Type: Staff Position Summary: The Maker Mentor I provides instructional and technical support to users of the NJIT Makerspace through hands-on training, supervision, and fabrication assistance. This position plays a foundational role in ensuring that users learn to safely and effectively operate Makerspace equipment, including 3D printers, laser cutters, CNC machines, and basic shop tools. Maker Mentor I employees deliver formal training sessions, supervise users during open lab hours, assist in developing instructional materials, and help maintain equipment and workspaces. They support students, faculty, and staff in transforming design concepts into physical prototypes while upholding the highest standards of safety and professionalism. This role emphasizes skill development, collaboration, and continuous learning as part of a technical education environment that encourages innovation and creativity. Essential Functions: -Deliver formal training sessions and assist in developing instructional materials. -Supervise users during lab hours to ensure safe and effective equipment operation. -Operate, maintain, and troubleshoot basic fabrication and prototyping tools. -Support students, faculty, and staff in design and fabrication projects. -Enforce safety standards and assist with policy implementation. Prerequisite Qualifications: -Bachelor's degree in engineering, engineering technology, industrial design, or a related field. -0-2 years of relevant hands-on or instructional experience. -Proficiency in basic fabrication tools and digital design workflows. -At the university's discretion, the education and experience prerequisites may be exempted where the candidate can demonstrate to the satisfaction of the university, an equivalent combination of education and experience specifically preparing the candidate for success in the position. Salary Information: In compliance with the NJ Pay Transparency Law, the hourly rate for this position is $35.00 (USD). NJIT considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and organizational considerations when extending an offer. This pay range represents base pay only and excludes any additional items such as incentives, bonuses or other items. FLSA: Non-Exempt Part-Time Apply NowShare Save Job

Title: Adjunct Instructor for ENGR 320 Prototyping Essentials Department: Newark College of Engineering Reports To: The Department Chair Position Type: Faculty Position Summary: The Newark College of Engineering, Office of the Dean seeks applications for an adjunct instructor to teach Prototyping Essentials (ENGR 320) course. ENGR 320 covers a variety of design and prototyping skills and concepts and requires student to demonstrate skills with weekly fabrication projects completed in the NJIT Makerspace. The successful candidate should be familiar with modern prototyping machinery and processes including CO2 laser cutting, fiber laser cutting, standard and CNC woodworking equipment, water jets, thermoforming, 3D printing, Fusion 360 2D and 3D CAD, Fusion 360 CAM, Arduino Programming, basic electronics, measurement tools, and other equipment. Training and qualifications on the operation of specific equipment can be provided by the NJIT Makerspace staff prior to the semester. Essential Functions: • Develop and deliver lectures and labs on prototyping, 2D modeling, 3D modeling, laser cutting, electronic circuit building, microcontrollers, water jets, 3D printing, woodworking, thermoforming, fastening, etc., • Prepare materials for laboratory assignments and conduct laboratory exercise supervision., • Learn and use online course management system - Canvas., • Hold office hours in the NJIT Makerspace and coordinate with instructor running additional sections of ENGR 320 on a regular basis. Prerequisite Qualifications: • Candidates should have at least an M.S. degree in Engineering, Engineering Technology, Industrial Design, or a closely related field., • A minimum of 3 years of experience in teaching university level courses., • At the university's discretion the education and experience prerequisites may be exempted where the candidate can demonstrate to the satisfaction of the university an equivalent combination of education and experience., • Candidates should be prepared to teach on a face-to-face basis. Bargaining Unit: AFT-UCAN Salary Information: In compliance with the NJ Pay Transparency Law, the rate for this position is $2668 per contact hour (USD). NJIT considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and organizational considerations when extending an offer. This pay range represents base pay only and excludes any additional items such as incentives, bonuses or other items. FLSA: Exempt Part-Time Apply NowShare Save Job

Scientist (materials science, raw material characterization, hplc, gc, ms, ftir, xrd, laser diffraction, etc.

Job Title: Cardiac Cath Lab Registered Nurse (RN), On Call RequiredLocation: Cooperman Barnabas Medical CtrDepartment Name: Cardiac Catheter LabReq #: 0000233437Status: HourlyShift: DayPay Range: $47.85 — $64.04 per hourPay Transparency: The above reflects the anticipated hourly wage range for this position if hired to work in New Jersey.The compensation offered to the candidate selected for the position will depend on several factors, including the candidate's educational background, skills and professional experience.Job Overview:As a Cardiac Catheterization Lab Registered Nurse (CCL RN), you will assist physicians and allied healthcare staff in performing a variety of diagnostic and interventional cardiac/endovascular, EP, Vascular and structural procedures. You will utilize knowledge of pathophysiology to ensure patients are prepared/educated/supported during procedures, whether monitoring, circulating, or assisting with scrub procedures. As a Cardiac Cath. Lab Registered Nurse, you will be responsible for TEE, CV, tilt table tests, ILR procedures, as well as pre- and post-care of patients, including admissions, discharges and transfers.Cooperman Barnabas Medical Center (CBMC) Catheterization Lab specializes in cardiac catheter, vascular, neurovascular (stroke) and structural heart procedures, as well as electrophysiology. Procedures performed in the Cath lab include the following: left and right heart catheterizations along with percutaneous intervention as necessary, intracoronary ultrasound, rotational atherectomy, balloon pump insertion, Impella insertion, left atrial appendage closure, catheter-directed thrombolysis for pulmonary embolization, structural procedures (TAVR, Mitra Clip), neurovascular cerebral angiograms, stroke treatment, carotid stenting, treatment of cerebral aneurysms with coiling and pipeline interventions, peripheral and renal angiograms with intervention as necessary, Watchmen, CardioMEMs, and Electrophysiology (cardiac devices, ablations, PVI’s, laser lead extractions).Qualifications:Cath Lab experience is strongly preferred.A minimum of 2 years of critical care experience is required.Telemetry experience required.Strong critical thinking/assessment skills.Must be I.V. certified from an approved facility or complete the requirements for I.V. certification within 90 days of hire to the unit.Completion of all orientation requirements of Cooperman Barnabas Medical Center.Successful completion of all Orientation Programs.Certifications and Licenses Required:Current and active New Jersey RN licensure is required. Baccalaureate Degree or Associate Degree in NursingAmerican Heart Association Basic Life Support Certification (BLS) upon hireAmerican Heart Association Advanced Cardiac Life Support Certification (ACLS) upon hireScheduling Requirements:Day Shift, 12.5-Hour Shift8A-9POn Call RequiredEssential Functions:The Registered Nurse provides nursing care in the health care system within the scope of practice defined by the Nurse Practice Act and regulatory standards, and assures awareness of ethical standards of practice as defined by the ANA code of ethics.The Registered Nurse assures safety in practice and is inclusive of the principles of evidence-based practice by maintaining a realization of their own individual level of knowledge and experience, and assumes responsibility for advancing knowledge of self and others in the patient care team by communicating with and utilizing resource persons and programs available.The Registered Nurse is responsible for reporting identified safety issues, such as hazardous environments (i.e., damaged floors/walls/ceiling tiles/unsecured areas) and medical errors.The Registered Nurse is responsible for knowledge of the patient population served.The Registered Nurse is responsible for supervising and directing the delegation of tasks to appropriate team members and collaborating with other patient care providers.The Registered Nurse is responsible for consistently setting and evaluating priorities through appropriate interventions with measurable outcomes toward improvement.The Registered Nurse is an individual practitioner and the interdisciplinary team manager, who utilizes the nursing process to integrate all aspects of the provision of care and individualizes the plan of care to address a specific patient’s needs.Other Duties:Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time, with or without notice.Benefits and Perks:At RWJBarnabas Health, our employees are at the heart of everything we do. Driven by our Total Wellbeing promise, our market-competitive offerings include comprehensive benefits and resources to support our employees’ physical, emotional, financial, personal, career, and community wellbeing. These benefits and resources include, but are not limited to:Paid Time Off, including Vacation, Holidays, and Sick TimeRetirement PlansMedical and Prescription Drug InsuranceDental and Vision InsuranceDisability and Life InsurancePaid Parental LeaveTuition ReimbursementStudent Loan Planning SupportFlexible Spending AccountsWellness ProgramsVoluntary Benefits (e.g., Pet Insurance)Community and Volunteer OpportunitiesDiscounts through our Partners such as NJ Devils, NJ PAC, and Verizon...and more!Choosing RWJBarnabas Health!RWJBarnabas Health is the premier healthcare destination providing patient-centered facilities, high-quality academic medicine compassionately and equitably, while delivering best-in-class work experience for every member of the team. We honor and appreciate the privilege of creating and sustaining healthier communities, one person and one community at a time. As the leading academic health system in New Jersey, we develop and implement innovative strategies for high-quality patient care, education, and research that address both the clinical and social determinants of health. RWJBarnabas Health aims to truly have a unique impact on local communities throughout New Jersey. From vastly improving the health of local residents to creating educational and career opportunities, this combination greatly benefits the state. We understand the growing and evolving needs of residents in New Jersey—whether that be enhancing the coordination for treating complex health conditions or improving community health through local programs and education.

Job DescriptionDescriptionCelebrating 20+ years of excellence, SkinSpirit is a top destination for aesthetic skincare and body-with over 55 locations nationwide. Our highly trained experts are the best in the industry-renowned for personalized service deliver safe, effective, medically-proven treatments and optimal results. SkinSpirit is here to ensure you find joy in your skincare journey and happiness in the results you're looking for. We thrive in a people-first culture with an authentic emphasis on wellbeing. As we grow, we reinforce the integrity of our unique culture by leading with love and an unparalleled passion for what we do. We offer world-class training and education. And as industry leaders we're always innovation-bringing stat-of-the-art equipment and services to our clinics. Join the SkinSpirit experience! Aesthetic Medical Practitioners will be responsible for assessing and providing patients with aesthetic medical services including but not limited to cosmetic injections (i.e neurotoxins, dermal filler), laser therapy (i.e BBL, HALO) and laser hair removal. What You Will Do • Provide client consultations, develop personalized treatment plans and skillfully perform treatments tailored to each patient's needs and objectives, • Educate patients on all treatment processes, including pre and post treatment care instructions, • Acknowledge and respond to relevant patient queries, needs and expectations, • Apply best practices and stay up to date with market trends and techniques for treatment, • For mid-level providers and above (NP, PA, MD, ND and DO), provide in clinic GFE (good faith exam) support when needed, as licensure permits, • Ensure patient safety at all times, • Suggest and promote retail products and additional services offered at the company, • Clean and maintain equipment and inventory of products, • Follow established treatment protocols, • Keep track of and update patient charts; take before and after photos, • Generate and maintain a patient base, • Attend trainings and meetings, • Assist with other duties as assigned, • Active Registered Nurse (RN), Nurse Practitioner (NP), Physician Assistant (PA), Medical Doctor (MD), Doctor of Osteopathy (DO), or Naturopathic Doctor (ND) license required to practice in the state of employment, • 2+ years of experience desired, • Experience in a clinic setting preferred, • Laser experience preferred, • Existing clientele is a plus, • Exceptional interpersonal and communication skills; must be able to communicate effectively with patients, peers and managers, • Ability to multi-task while being attentive to clients and remaining flexible to the needs of the business, • Ability to work as part of a team and take initiative independent of direct supervision, • Proficient with email, • Social media experience is a plus, • Availability to work evenings and weekends Physical Requirements, • Prolonged periods of:, • Standing, bending or stooping, • Use of hands and arms to touch, handle, feel or control things including but not limited to tools, objects and/or controls, • Reaching with hands and arms, • Repeating of same movements, • Talking and hearing, • Occasional periods of:, • Sitting, crawling, kneeling, climbing or balancing Notices for Applicants Notice at Collection Privacy Policy for California Residents SkinSpirit participates in E-Verify; To learn more please visit E-Verify.gov - Employee Rights and Responsibilities SkinSpirit is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. We seek to hire on the basis of merit, competence, performance, and business needs.

Job Description New Jersey Medical Dermatology Nurse Practitioner or Physician Assistant opportunity with group that has office in Jersey City area. Full time is 35 hours each week. 4 days a week opportunity. Must have over 2 years of Medical Dermatology office experience and be credentialed with NJ Medicaid. About the Dermatology Nurse Practitioner or Physician Assistant opportunity • Split time between two offices, • Provider is often solo Provider in office so experience required, • No training in place but Physician available by phone and Reps visit weekly, • 60 patients a day or 200 or more patients a week (remember full time is 35 hours), • Mix of first time appointments and follow ups, • BOTOX and Fillers, Body sculpting, acne scar and skin rejuvenation, Laser therapy, and PRP with Physician owner, • 2 Medical Assistants for each Provider, • 3 exam rooms, • Office hours are 9-5, Monday- Thursday, One day is late opening till 7. Friday is a half day, • One Saturday a month (day off during week to compensate), • EMR is Modernizing Medicine, • Aesthetics experience not required Requirements of the Dermatology Nurse Practitioner or Physician Assistant opportunity • Master's Degree completed, • National Certification, • New Jersey State Medical License, • Must have NJ Medicaid credentialing ( 50 % patients are Medicaid), • Two or more years of experience in outpatient Medical Dermatology, • Experience as a solo Provider in an office, • Comfortable with fast paced schedule (60 patients a day), • Procedure leaning- biopsy and injections, • Strong tech experience and able to write notes in EMR "as you go", • Saturday coverage once a month, • Travel to both offices with reasonable commute from home Perks of the Dermatology Nurse Practitioner or Physician Assistant opportunity • Base Salary starts at $120,000 PLUS Incentives, • Full time is 35 hours a week, • Bonus incentive 15% of revenue over $450,000, • One Saturday each month, • 10% of sales revenue for Products and Procedures, • 3 weeks of PTO, • Health / Dental / Vision, • 401K, • 2 Medical Assistants, • Flexible hours that allow a day off each week, • Great team and supportive staff Busy Dermatology office with proximity to New York City. Solo Provider model for several days each week. Opportunity on generate incredible bonus. For more information, contact Lynda Gregg, linkPAs.com, 904-452-4499.

Job Description Raycap, Inc., an industry leader in manufacturing solutions for telecommunications, renewable energy, transportation, defense, and other applications, is seeking Third Shift Laser Cutting Operators for our Kearny, NJ facility. This is a fast-paced role within a sheet metal manufacturing environment. The Laser Operator is responsible for all functions related to daily production output. This position requires the use of computers, CAD programs, basic hand tools, and precision measurement instruments. Third Shift Schedule: Monday–Friday, 11:00 p.m.–7:30 a.m. Includes an additional shift differential Primary Job Responsibilities: • Program, set up, and operate CNC lasers—preferably AMADA systems, • Collaborate with production leads to meet demand and stay on schedule, • Inspect parts to ensure they meet quality standards and are free of defects, • Perform routine maintenance on machinery, • Maintain a clean and safe work area, • Partner with Quality, Environmental, and H&S teams to ensure compliance with all operational and regulatory requirements, • Minimum of 2 years’ experience in laser programming and setup, preferably with AMADA equipment or similar sheet metal CNC systems, • Ability to read and interpret 2D prints, 3D models, and work instructions, • Knowledge of sheet metal processes, nitrogen usage, and feed rates, • Proficiency with basic measurement instruments to verify component accuracy, • Strong verbal communication skills, • Excellent time management, • Ability to lift up to 50 lbs., and to stand, bend, and move frequently throughout the shift, • Experience in sheet metal fabrication, • Understanding of laser machine capabilities and limitations, including cut settings, • Experience with NC coding, including making edits based on job requirements UNION: IBEW Local Union 3 BENEFITS: Please reference the IBEW Local 3 Union Contract for details on all benefits. • Medical/Dental/Vision/HRA/Annuity - 6 months from date of hire, • Vacation Time - will begin effective June 30th, after 6 months of continuous employment, • Sick Time - will begin accruing from day one, • Mandatory Union Dues - $7/week, $28/month, • Mandatory One-Time $182 Union Application Fee Drug-free workplace.

The Laser Operator is responsible for all functions related to daily production output. Perform routine maintenance on machinery. Understanding of laser machine capabilities and limitations, including cut settings.

Job Description Hyundai Rotem is a global heavy industry company that specializes in manufacturing rolling stock, military equipment and plant engineering. It is able to produce all types of rolling stock, including electric multiple units (EMUs), high-speed trains, engine locomotives, wireless trams and magnetic levitation (maglev) trains. In addition, it is ushering in the new era of eco-friendly hydrogen fuel by developing trains powered by hydrogen fuel cells along with hydrogen infrastructure and hydrogen markets. Job Responsibilities: • Support the preparation of design deliverables such as, CDRLs or electrical system design packages, etc., • Participate in technical meetings or/and workshops with the Customer, suppliers and internal parties. This includes the preparation of meeting minutes and its distribution to relevant parties., • Prepare or/and review technical documents, drawings, specifications and standards to ensure accuracy and completeness., • Actively participate in problem-solving and resolution processes related to mechanical system design and its integration challenges., • Prepare and update Interface Control Documents (ICDs), System Integration Plans (SIPs), and related documentation to define and manage the functional interfaces between the new system and existing infrastructure, including wayside equipment, facilities, and rolling stock., • Stay up-to-date with the latest electrical system designs as the project progresses., • NY City site support, • 3 – 5 years of experience in electrical system design and/or integration, preferably in the rolling stock., • Detail oriented, excellent organizational skills, and strong written & verbal communication skills., • Strong understanding of engineering principles., • Ability to perform electrical inspections with equipment including but not limited to calipers, micrometers, indicators, go/no go gages, and non-contact optical/laser measurement equipment., • Ability to read and interpret electrical drawings., • Ability to work under pressure in a fast-paced environment., • 401(k) matching, • Health insurance, • Life insurance Work Location: In person

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:We are seeking a highly motivated Plasma-Materials Scientist to join our team, focusing on plasma-facing material development. The ideal candidate will possess a strong background in the research and development of plasma-surface interactions, with particular emphasis on material survivability evaluation, plasma and heat-induced erosion processes, and plasma contamination effects in fusion-relevant environments. You will work with high autonomy and ownership, and contribute to cutting-edge research and development in Thea Energy’s stellarator systems.Key responsibilities: • Contribute to the construction and commissioning of a plasma device and diagnostics for exposing and evaluating plasma-facing material candidates., • Collaborate with plasma-material exposure facilities and use materials characterization tools for surface evaluation., • Provide technical guidance across team members in plasma device operation, plasma-material performance assessment and experimental planning., • Participate in stellarator plasma-facing component operational campaign planning., • Utilize computational and simulation tools to perform plasma-surface interaction simulations, thermal analysis, and contribute to multi-physics modeling efforts.Required Experience & Skillsets:, • Master's degree in materials science, engineering, applied plasma physics, chemistry, or a related field., • Knowledge of basic plasma physics., • Experience with vacuum systems., • Experience with experimental plasma setups and diagnostics such as industrial plasma sources, RF plasmas, spectroscopic diagnostics, laser-based diagnostics, and electrostatic probes., • Experience with surface analysis techniques such as electron microscopy, atomic-scale microscopy, and elemental composition analysis methods (e.g. XPS, EDX, Raman)., • Experience with one or more of the following: Python, MATLAB, FEA tools, COMSOL, C++, Fortran., • Ability to work independently and manage projects., • Strong attention to detail, • A passion for advancing fusion energy to commercialization., • Willingness to collaborate with a diverse team of scientists and engineers within the company and externally.Ideal Experience & Skillsets:, • PhD in applied plasma physics or a related field., • Experience with fusion boundary plasmas and/or low-temperature plasmas., • Experience with linear plasma devices., • Experience in tokamak or stellarator divertor research., • Experience with ERO2.0, TRIDYN, SDTrimSP/TRIM, WALLDYN, or RustBCA.Company Benefits:, • Salary range $100,000-$160,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options

Job DescriptionDescription: Join Our Growing Ophthalmology Team as an Ophthalmic Technician! Hours: Up to 40 per week $1000 Sign on Bonus Why Join ReFocus? • Career Development & Growth Opportunities: At ReFocus, we are committed to helping you build a long-term career in ophthalmology—whether you’re an experienced technician or brand new to the field., • Certification Support & Reimbursement: We fully support your professional development and will reimburse the cost of approved ophthalmic certifications, including COA, COT, and COMT. We also provide study resources, mentorship, and paid time for testing when applicable. Your Impact: • Elevate patient care: Work closely with our ophthalmologists to gather comprehensive patient information, ensuring accurate diagnoses and personalized treatment plans., • Master ophthalmic testing: Conduct thorough preliminary examinations, including visual acuity, pupillary responses, and more., • Perform advanced diagnostics: Administer a range of diagnostic tests, such as OCT, perimetry, and ophthalmic photography., • Assist in surgical procedures: Support ophthalmologists during minor surgeries, laser procedures, and crosslinking., • Streamline patient flow: Efficiently manage patient flow in clinic and imaging rooms, collaborating with clinical staff., • Administer eye drops: (Certification Required), • A passion for patient care and a commitment to excellence., • Exceptional attention to detail and strong organizational skills., • Excellent communication and interpersonal abilities., • Ability to thrive in a fast-paced, team-oriented environment., • Proven experience as an Ophthalmic Technician., • Knowledge of medical office procedures., • Ability to perform indirect activities, administrative tasks and any other assigned duties that contribute to the efficient & high-quality performance of the medical practice., • Reliability and a strong work ethic., • Ability to work collaboratively with a diverse team., • Proficiency in data entry and typing., • Outstanding customer service skills. We Care: We prioritize patients, colleagues, and families with compassionate, leading care and treat all with dignity and respect. We Collaborate: We work together with patients, seeking diverse input to share and grow innovative ideas. We Elevate: Committed to excellence, we exceed expectations by delivering leading eye care research, innovation, education, and outreach. Refocus is an equal opportunity employer and we value diversity. Requirements:

Job DescriptionShift: Pay Range: $85k-$100k Equipment:CIMEX CAD software Job Description • We are seeking an experienced Cimex CAD Programmer to design and program flat steel rule dies and related tooling components. This role is responsible for processing customer-supplied files and converting them into accurate CAD files ready for manufacturing., • Program and design flat steel rule dies using Cimex CAD software, • Process customer-supplied artwork and convert files into production-ready CAD formats, • Create CAD files for:, • Phenolic counters, • Steel counter plates, • Male and female stripping tools, • Upper and lower blanking tools, • Spot sheets and mylars, • Generate CNC-ready files for routers, lasers, rule processors, and milling equipment, • Interpret customer artwork, structural drawings, and production specifications, • Apply correct rule heights, crease profiles, tolerances, and material allowances, • Optimize nesting layouts and material utilization, • Troubleshoot programming and production issues with toolmakers and press operators, • 3+ years of experience programming steel rule dies and related tooling, • Proficiency with CIMEX CAD software, • Strong understanding of:, • Steel rule die manufacturing processes, • Die cutting and converting operations, • Counter plate design and stripping tool configuration, • Ability to read and interpret structural drawings and dielines, • Experience in folding carton, corrugated, label, or packaging industries, • Familiarity with laser cutting systems and rule bending equipment, • Understanding of make-ready reduction techniques, • High attention to detail and accuracy, • Strong mechanical aptitude, • Problem-solving mindset, • Ability to manage multiple projects and deadlines, • $85,000 – $100,000 per year (commensurate with experience), • 401(k) with company match

Job Description Urgently Hiring- Northeast Power Dry is urgently hiring a Re-Construction Project Manager for a full-time position in NJ. • Dispatched from home. * Must be located in New Jersey! Northeast Power Dry is seeking a Re-Construction Project Manager with a proven track record of success in the construction or restoration industry, to contribute to the growth of the Reconstruction Department. The right individual will possess subcontractor management skills and a high level of customer service. This person should be able to thrive in a fast-paced and dynamic environment that is laser-focused on customer service, operational execution, and growth. What We Offer (Our Benefits) Health & Wellness • Comprehensive medical, dental & vision insurance (some plans fully company-paid), • 401(k) with company match up to 4%, • Competitive base pay + performance bonuses / uncapped commission (if sales), • Weekly pay (for hourly/salary/ field roles), • Travel reimbursement for work-related trips, • Paid Time Off (PTO), • Paid holidays + 1 floating holiday, • Sick time that carries over year to year, • Paid training and certification support, • Opportunities for advancement and career growth, • Company vehicle, gas card & iPad (for field roles), • Within Salesforce, completely Project Manage assigned residential reconstruction projects, ensuring correct production and quality control efforts meet Dry Force standards, • Selling and closing the Residential Reconstruction job to the Homeowner, • Building estimates using Matterport software into production, • Coordinating internal pre/post-production efforts, • Assisting customers through the insurance claims process, • Ensure through an effective liaison relationship, the insurance adjuster approves the estimate, • Managing subcontractors, insurance companies, coworkers, and customers, • Inspection of job sites on a regular basis, • Effectively briefing and communicating with peers, staff, and leadership, • Complete all reconstruction jobs efficiently, maintaining profitable revenue expectations, • Bachelor’s Degree with 2-3 years of Project Management experience in a related field., • Note: While a degree is preferred, Northeast Power Dry recognizes that life/work experience speaks volumes to a candidate’s capabilities, • Daily territory travel by company car, • Exceptional customer service skills Northeast Power Dry was founded in 1996, with a mission to serve our community through our company values and provide our clients with solutions. We strive to provide a great work environment with a positive culture and provide our team members with a clear career path for growth. Our company is growing rapidly and looking for hard-working, dedicated people to join our amazing team. If you are interested in learning more about a career with Northeast Power Dry as a Re-Construction Project Manager, apply today! We are an equal opportunity employer and value diversity at our company. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Job DescriptionBenefits: • 401(k), • Bonus based on performance, • Dental insurance, • Health insurance, • Paid time off The Turning Point is an award-winning DAYTIME ONLY restaurant! With restaurant hours between 7:30am to 3pm, we offer our employees a better balance between work & Life. Who doesnt love to be home in time for dinner every night? Experience & Growth: We have been in business for 28 years and now have locations across NJ, PA, DE, FL, and VA. We are a growing company offering exciting career opportunities and growth. We are expanding with both corporate-owned locations and franchised stores. Professionalism: We pride ourselves on finding and training energetic, hard-working individuals that may or may not have restaurant work experience, but do have the desire to learn, lead and provide exceptional service to guests. Gratitude: We show our appreciation to team members in many ways, such as company picnics, evening dinner outings, additional paid days off, manager workshops, gifts of appreciation, birthday announcements and other tokens of gratitude Respect: We provide a comprehensive Managerial training program for our new hires. Throughout your training there are weekly and biweekly follow-ups with the upper management team as well as our HR Manager to ensure you are having a positive experience. This collaboration ensures that you are learning all aspects of the Turning Point system and emphasizes the mutual respect we all have for each other. After your training is complete, you will be placed in a restaurant. Individual store operations lie under your control with the assistance and guidance of your District Manager. Providing top leadership to your team members and laser focused on guest satisfaction will be mandatory requirements. Great people are those who make others feel that they, too, can become great Mark Twain. Manager Information & Responsibilities to include (not exclusive to): • Daily management of 1 shift. No need to ask staff to work a double when you close at 3, • No close / open shifts for our managers., • Work alongside the FOH and BOH staff., • Conduct one full inventory for each period., • Full transparency on the financial performance of the restaurant for your performance-based compensation., • Fully implemented technology solutions to help you do your job., • Support & communication that is timely and helpful without intruding on your personal time., • Relocation opportunities within the states we operate in., • Consistently seek out and hire exceptional team members, • Ensure equity and equality for all., • Present and develop growth opportunities for your team members., • Provide the ideal Turning Point experience for our guests from start to finish. Qualifications:, • Prior restaurant experience preferred (but not required), • Ability to lead, coach and mentor a team, • Work effectively in partnerships, • Professional verbal & written communication skills, • Enthusiastic and encouraging leadership attitude Schedule:, • Day shifts only, • Available to work on Holidays and Weekends, • Opportunity for occasional weekends off through approved shift swaps, when staffing permitsSupplemental Pay, • 13 performance-based bonus paymentsBenefits Available:, • Never Work Nights Again!, • Medical Benefits, • Dental Benefits, • Vision Benefits, • 401(k), • 13 Performance Based Bonuses, • Paid Time Off, • Single Shift Operation Turning Point provides a supportive working environment that promotes teamwork, growth and values collaboration. Being in business for 28 years, we know the importance of treating people right and with respect. We hope you start your new career journey with the Turning Point; you will be glad you did. Please complete our short application today. We are excited to meet you! 137 Central Ave, Westfield, NJ 07090

Job DescriptionDescriptionA great place to work and grow, Naik Group is a dynamic, multi-discipline engineering company with offices in New York and New Jersey. Our continued growth in this highly competitive market is evidence of the trust and value clients place in our services’ quality and timeliness. Included in the full range of professional services we offer are Bridge/ Structural Design & Inspection, Highway/Roadway Engineering, Civil/Site Engineering, Traffic Engineering/ITS, Utility Engineering, Construction Management & Inspection, Design Build, Survey, Right of Way, and High Definition 3-D Laser Scanning. Our principals take considerable pride in their approach to the firm’s management, offering services like that of a large organization while demonstrating the personal client and consultant relationship of a small firm. Naik Consulting Group is currently seeking a Senior Construction Manager with proven experience and expertise in Bridge/Rail projects. The Senior Construction Manager will oversee a multidisciplinary team and lead the project through preconstruction to commissioning for a multi-million dollar bridge repair project. Responsibilities • Lead overall construction planning, scheduling, and execution for major bridge and rail projects., • Apply expert level of knowledge of construction means and methods, materials and techniques for bridge repair., • Manage field operations, subcontractors, and project engineering staff to ensure work is completed safely, on time, and within budget., • Oversee coordination with rail agencies, transportation authorities, utility providers, and other stakeholders., • Review design documents, shop drawings, and technical specifications to ensure compliance and constructability., • Implement and enforce safety programs, quality control procedures, and risk-management strategies., • Ensures adherence to contract terms, performance, quality assurance, compliance requirements, and engineering specifications., • Prepare progress reports, cost forecasts, and change-order documentation., • Serve as the primary on-site project leader, maintaining strong communication with clients, consultants, and internal teams., • Establishes work plan and multidisciplinary staffing of the project and arranges for assignment of project personnel., • Mentor junior staff and contribute to long-term workforce development. Qualifications • Bachelor’s degree in Construction Management, Civil Engineering, or related field (Master’s preferred)., • Active New Jersey Professional Engineer (PE) License is required., • 20+ years of construction project management experience with expert level knowledge of bridge and/or rail projects., • Minimum of 7+ years in a supervisory role, • Management of at least three (3) bridge construction or rehabilitation projects and one (1) completed project involving railroad infrastructure within an active railroad environment., • Strong understanding of track work, rail operations, bridge structures, and applicable codes and standards., • Proven track record of delivering multi-million-dollar transportation projects., • Expertise in project scheduling software (e.g., Primavera P6), document controls, and cost management tools., • Exceptional leadership, communication, and problem-solving skills., • Ability to work in a fast-paced environment and manage multiple priorities. BenefitsNaik offers a competitive compensation package including: • Generous sign-on bonus, • Holiday and paid-time-off programs, • 401(k) Plan and Match, • Career Path Development Program (Management & Technical Career Tracks), • Tuition Reimbursement, • Competitive health and dental insurance premiums, • Short-Term Disability/Long-Term Disability, • Life insurance, • Employee Assistant Program (EAP), • Flexible Spending Account, • and MoreNaik is a Drug and Alcohol-Free workplace, an Equal Employment Opportunity employer and E-Verify employer. We are committed to pay transparency and fairness in hiring. This posting complies with the Pay and Benefit Transparency Laws, which requires employers to disclose compensation and benefits information in all job advertisements.

Job Description Date posted: February 2, 2026 Pay: $150,000.00 - $200,000.00 per year Job description: Job Summary We are looking for an experienced Used Car Manager whose primary responsibility is keeping our used vehicle inventory fully stocked. This role is laser-focused on acquiring a minimum of 100 units per month through multiple buying channels such as online auction, KBB, and private wholesale. We are a busy Certified KBB Buying Center with 500 leads a month!| We're a busy, multi-franchise growing new car dealership with a growing pre-owned department and looking to take our used car operation to the next level. The ideal candidate is someone who understands the importance of inventory management, reconditioning, pricing, and sales process execution. Benefits • SIGN ON BONUS $10,000 !, • Pay between $150,000- $200,000, • Must have experience buying vehicles with online auctions, • Must know how to use Workbook and Proxy Bid, • Manage all aspects of the used vehicle department, including appraisals, acquisitions, pricing, and merchandising., • Oversee inventory management ensuring vehicles are accurately priced, photographed, and online., • Minimum 2+ years of experience as a Used Car Manager or Assistant Manager in a dealership., • Proven success in retail automotive sales and management., • Strong knowledge of market-based pricing tools (vAuto), • Ability to manage inventory turn and profitability., • Valid driver's license with a clean driving record.

Job Description Fairstead is a purpose-driven real estate firm dedicated to building affordable communities across the country. Headquartered in New York, with offices in Colorado, Florida, and Washington DC, Fairstead owns and manages a portfolio of more than 27,000 apartments across 28 states. As an integrated owner, operator, and innovator, Fairstead brings development, construction, and property management under one unified platform to deliver high-quality affordable housing that serves our residents at scale. At Fairstead, we believe affordable housing should be thoughtfully designed, professionally managed, and responsibly operated. We seek to create and preserve housing that serves residents while delivering long-term value to communities, partners, and stakeholders. Fairstead challenges industry norms through our tech-forward, entrepreneurial approach to affordable housing. In addition to core real estate capabilities, we operate innovative service lines designed to improve resident outcomes, strengthen communities, and drive operational efficiency. We embrace digital transformation, data-driven decision-making, and emerging technologies, including AI, to build scalable systems that support sustainable growth, grounded in a culture of entrepreneurship, innovation, partnership, dedication, and integrity. Fairstead has an exciting opportunity to oversee a region of growing properties. The Regional Property Manager oversees the day-to-day operations of communities in their assigned region, implementing policies, procedures, and practices to enable each property to meet budgeted financial goals and achieve operational performance objectives. RESPONSIBILITIES: • Complete oversight of all real estate property management functions including managing the day-to-day administrative and maintenance operations in their region., • Creates and implements leasing and marketing plans, resident relations, budget preparation and financial reporting, and monitoring compliance with HUD., • Prepares monthly variance analysis reports (Financial Overviews) for submission to CFO (Chief Financial Officer)., • Conducts monthly budget review to ensure sites are meeting NOI., • Ensures that all resident complaints are handled expeditiously, diplomatically, and professionally., • Supervises the appropriate building security measures, incident documentation, lease violation reports and proper notification of management, owner, and/or insurance carriers where necessary., • Develops, implements, and assures continued implementation of preventive maintenance programs., • Ensures that maximum economic rents are achieved through active rent level management, general and targeted outreach methods, assurance of leasing skills, and resident retention programs., • Responsible for vouchering through TRACS and ensuring all voucher related issues are handled expeditiously and turned around to the Contract Administrator., • Coordinates with staff & third-party contractors to ensure all work orders are closed out with signatures and photos of all work., • Approves the purchases of large-scale items/repairs., • Performs other related duties as required. BENEFITS: • Generous employer contribution for Medical Insurance through Meritain Health., • Employer Paid Vision Plans., • Company Matched 401(k) Retirement Plan: 100% of the first 3%; 50% of the next 2%., • 12+ paid Holidays., • 20 days of PTO., • 7 Sick days., • Employer Paid Life Insurance., • Flexible Spending Account., • Nationwide Pet Insurance., • Disability Insurance., • Laser Correction Discount., • Employee Discounts on appliances, apparel, and more. QUALIFICATIONS: • Two (2) years of experience as a Regional Property Manager., • Proficiency in YARDI and Realpage is required., • Experience with preparation and oversight of REAC and MOR inspections., • Exceptional communication, customer service, and organizational skills., • Ability to diffuse difficult situations., • Knowledge of the NYC residential market (Rent Stabilization, DHCR, HPD)., • In-depth knowledge of Affordable Housing., • Ability to manage multiple priorities while demonstrating the initiative to produce results and resolve problems., • Bilingual in English and Spanish is a plus., • Able to effectively present information and respond to questions from management, vendors, and associates., • Adhere to tight deadlines and quick turnaround for deliverables., • Ability to work collaboratively in a dynamic environment where adaptability is imperative., • Strong written and oral skills., • Accurate with a strong attention to detail. Salary Range$100,000—$120,000 USD Diversity in backgrounds and experiences is key to Fairstead's success. Being an equal opportunity employer is a central tenet of our philosophy that shapes who we are and the communities we serve. Our goal is to ensure competitive total compensation that is commensurate with experience, location, and other market benchmarks. For information about how we use your personal information, including information submitted for career opportunities, please review our Privacy Policy at

Join BLT’s team of dedicated professionals as a .This position performs various hands-on maintenance duties necessary to maintain and enhance the value of our luxury community located in Jersey City, NJ.Duties & Responsibilities of the .Assists in completing work in “make-ready” apartments,

We're currently looking for individuals across the country to take part in remote paid research, including remote focus groups, product trials, and consumer studies.Earn up to $750 a week in your free time by providing feedback on everyday products and services.If you're comfortable sharing your opi

Join BLT’s team of dedicated professionals as a .This position performs various hands-on maintenance duties necessary to maintain and enhance the value of our luxury community located in Jersey City, NJ.Duties & Responsibilities of the .Assists in completing work in “make-ready” apartments,

Aerotek - - Responsibilities: Operate traditional stand-up or sit-down forklifts in a warehouse environment.Scan inventory in and out using a scanner and computer system.Handle pallets by stacking, loading, unloading, and staging.Perform material handling tasks using electric pallet jacks.Assist wi

FedEx - - Responsibilities: Operate forklift and other warehouse equipment safely and efficiently; Assist in buildup/breakdown of pallets containing heavyweight freight; Move packages and ULDs; handle dangerous goods as required; Serve as liaison with ULD repair vendor; Perform other duties as assi

Marmon - - Responsibilities: Maintain and repair all production equipment; Perform preventive maintenance to production equipment; Organize and maintain an organized maintenance shop; Interact with Engineer & Production Team; coordinate jobs/projects on a daily basis; Review all work orders and com

Plastipak - - Responsibilities: Perform maintenance for blow molding & injection molding manufacturing equipment to assure uninterrupted & optimal operations; Execute & continuously improve preventative maintenance procedures; Participate in changeovers, ensuring efficient & correct execution; Repa

Responsibilities: Respond to work orders for minor repairs to equipment; Order and manage parts inventory; Complete daily reports and schedule/prioritize assignments; Read, understand, and follow service manual guidelines; Work safely and handle other duties as assigned.

Focus Workforce Management - - Responsibilities: Clean and prepare workstations; Load and deliver materials; Use a variety of tools or machines; Follow detailed instructions; Work with minimal oversight.

Kuehne+Nagel - - Responsibilities: Load and unload materials using heavy equipment; Move product throughout the site; Pick orders and store products; Verify and receive materials in inventory; Conduct pre-operation and post-operation equipment checks.

FedEx - - Responsibilities: Provide timely, quality maintenance for FedEx vehicle fleet and ground support equipment; Perform preventative maintenance, troubleshooting, repairs, modifications; Document maintenance activities and keep records; Operate and utilize testing equipment, gauges, and tools

National Church Residences - - Responsibilities: Perform routine and preventive maintenance on HVAC, plumbing, electrical, and building systems.Diagnose and repair maintenance issues in a timely manner.Maintain interior and exterior common areas, ensuring safety and cleanliness.Complete minor carpe

ABF Freight - - Responsibilities: Load and unload trailers for the purpose of transporting a wide variety of cargo.Operate forklift, pallet jack or other freight handling equipment.Complete all required paperwork.Move cargo, drive a forklift or use a pallet jack or other freight handling equipment.

Cintas Corporation - - Responsibilities: Repairing, maintaining, installing and troubleshooting industrial equipment and components; Performing preventive/predictive maintenance; Resolving safety concerns; Monitoring inventory supplies and maintaining maintenance records; Indoor and outdoor houseke

Midway Staffing - - Responsibilities: Unload inbound shipments safely and move product to storage locations; Stack and store merchandise in the appropriate areas; Pull and prepare product for shipment; Load, unload, move, stack and stage product using a Stand-Up Forklift, pallet jack, or other powe

Responsibilities: Operate an electric stand-up forklift to move pallets of merchandise and equipment; Hand-stack product from partial pallets onto full pallets of product.

FedEx - - Responsibilities: Perform preventative maintenance, troubleshooting, repairs, modifications, and documentation.Documents work and maintain adequate inventory using FedEx computer systems.Ensures work is in accordance with OSHA and DOT standards.Guides and supports a staff of technicians a