Lift operator jobs in Edison, New JerseyCreate job alerts

Overview: The Foods Warehouse position is physically demanding; manual labor is required. The Foods Support team is responsible for providing support to the Food Service department through ice production and delivery, beverage machine maintenance and novelty food storage and delivery. This position requires a valid drivers license and you must be 18 years of age or older. • Certain shifts begin as early as 6 am or go until 1 hour prior to park closing* Foods Support Associates are required to interact with guests, other Associates, leads, and supervisors on a daily basis. Additionally, Foods Support Associatess are required to continuously work outdoors and closely with others. Support staff will be required to work in the park when needed and must pass all Associates and cash handling trainings. Occasionally will work alone. Will always be exposed to direct sunlight, dust, dirt, and water. Must be able to function in all weather conditions for long periods of time. Foods Ice House/Support Host/Hostess must be willing to help in the park when needed. This may include but is not limited to, food safety, cash handling, interacting with guests, and providing excellent service. Pay Rate: $16.50/Hour Responsibilities: • Must be able to promote the park with the utmost enthusiasm and pride while providing support to the Foods Department through ice production and delivery., • Maintain the production of ice and delivery to food stands throughout the park., • Delivery of ice via the use of park vehicles, hand trucks and manually., • Bagging and lifting ice and operating lift equipment., • Maintain a safe and clean work area., • Maintain proper attendance and timelines., • Required to attend work in full grooming guidelines., • Required to stay in uniform w/ the exception of when in the support area., • Ensure guest safety and satisfaction in their stay at Six Flags., • Resolve Guest concerns that may arise on a daily basis., • Ensure standards of performance for all areas within their responsibilities are met., • Respond to any emergency situation in the area and maintain control until an area supervisor arrives., • Ensure that image, cleanliness and courtesy standards requirements are met., • Refrain from consuming any substance that may impair judgment., • Cooperate with all Associatess and managers., • Answer guest questions and give proper guidance., • Complete any and all tasks as requested by Six Flags Management., • At least 18 years of age., • Must posses a valid driver's license to drive park vehicles., • Able to communicate effectively in the English language, including the ability to read, speak, and understand the English language., • Available to work flexible hours at nights, weekends and holidays., • Must have good customer service skills., • Requires continuous sitting or standing, bending, eye/hand coordination, near vision, hearing, and speech. Requires frequent kneeling, manual dexterity, gross motor skills, and color definition. Requires using a telephone. Must be able to read and write English. Requires some lifting, sitting, standing, walking, bending, eye/hand coordination, near vision, hearing, and speech. Requires frequent kneeling, manual dexterity, gross motor skills, and color definition. Requires using telephone. Must be able to read and write English., • Must be able to stand/walk for up to 6 hours at a time and as many as 14 hours a day., • Must be able to walk up to 3 miles per day over various surfaces., • Must be able to lift 50 lbs consistently., • Must be able to lift and carry 50 lbs over 25 feet over various surfaces., • Must be able to lift and lower 50 lbs above shoulder level., • Must be able to climb a stepladder up to 6 ft. in height. Note: This job description is not intended to be all inclusive. Associates may perform other related duties as required, meeting the on-going needs of the company. Six Flags Entertainment Corporation is North America’s largest regional amusement-resort operator with 27 amusement parks, 15 water parks and nine resort properties across 17 states in the U.S., Canada and Mexico. Focused on its purpose of making people happy, Six Flags provides fun, immersive and memorable experiences to millions of guests every year with world-class coasters, themed rides, thrilling water parks, resorts and a portfolio of beloved intellectual property such as Looney Tunes®, DC Comics® and PEANUTS®. What's in it for you? • Free Food for Memorial Day, Fourth of July and Labor Day, • Exclusive Rides parties for all employees., • Scholarship Opportunities, • Professional Development, • Complimentary tickets, • In-Park discounts and more! Other Functions: All other duties assigned or necessary to support the park as a whole. While this job description is intended to be an accurate reflection of the requirements of the job, management reserves the right to add or remove duties when circumstances (e.g., emergencies, changes in workload, rush jobs, or technological developments) dictate. Six Flags is an Equal Opportunity Employer and supports a Drug Free Work Place.

Overview: Character Ambassadors will create memorable and positive experiences for guests of all ages while acting as the eyes and ears of our Looney Tunes and maintaining character integrity. Pay Rate: $16.00/Hour Responsibilities: • Assist the characters with costume prep to ensure punctuality., • Be ready to answer all guests' questions., • Be attentive to Looney Tunes characters, looking out for potential problems characters may encounter., • Create positive and memorable experiences for all guests., • At least 16 years of age, • Safety conscious, • Strong multitasking skills, • Must have excellent customer service skills, • Must be able to initiate and conduct friendly interactions with guests and cooperate with all team members and managers, • Able to work efficiently in fast-paced environments, • Must be able to stand/walk for multiple hours, up to 6 hours at a time and as many as 14 hours a day, • Ability to handle the summer heat/work in all weather conditions for extended periods of time, • Requires continuous standing, bending, hand/eye coordination, near vison, hearing and speech, • Requires frequent walking, lifting, kneeling, manual dexterity, gross motor skills and color definition, • Requires using a telephone/radio, • Ability to communicate effectively in the English language, including the ability to read, speak, and understand the English language, • Must be available to work flexible hours (including weekends), • Must be able to walk up to 5 miles a day, • Must be able to lift 25 lbs consistently, • Must be able to lift and lower 5 lbs above shoulder level Note: This job description is not intended to be all inclusive. Associates may perform other related duties as required, meeting the on-going needs of the company. Six Flags Entertainment Corporation is North America’s largest regional amusement-resort operator with 27 amusement parks, 15 water parks and nine resort properties across 17 states in the U.S., Canada and Mexico. Focused on its purpose of making people happy, Six Flags provides fun, immersive and memorable experiences to millions of guests every year with world-class coasters, themed rides, thrilling water parks, resorts and a portfolio of beloved intellectual property such as Looney Tunes®, DC Comics® and PEANUTS®. What's in it for you? • Free Food for Memorial Day, Fourth of July and Labor Day, • Exclusive Rides parties for all employees., • Scholarship Opportunities, • Professional Development, • Complimentary tickets, • In-Park discounts and more! Other Functions: All other duties assigned or necessary to support the park as a whole. While this job description is intended to be an accurate reflection of the requirements of the job, management reserves the right to add or remove duties when circumstances (e.g., emergencies, changes in workload, rush jobs, or technological developments) dictate. Six Flags is an Equal Opportunity Employer and supports a Drug Free Work Place.

Job Description Mobile Boiler Technician - Multiple Properties We are seeking a skilled and reliable Mobile Boiler Technician to maintain, service, troubleshoot, and repair boiler systems across a portfolio of residential and/or commercial properties. This role requires strong technical expertise, a safety-first mindset, and the ability to work independently while delivering excellent service to tenants and property managers. Key Responsibilities • Perform routine maintenance, inspections, and repairs on boiler systems (gas, oil, and/or electric), • Diagnose mechanical, electrical, and control system issues and complete timely repairs, • Respond to emergency service calls, including after-hours or on-call rotations, • Ensure boilers operate safely, efficiently, and in compliance with local codes and regulations, • Complete combustion analysis, pressure testing, and system performance evaluations, • Replace or repair valves, pumps, burners, controls, heat exchangers, and related components, • Maintain accurate service records, work orders, and compliance documentation, • Communicate clearly with property managers and tenants regarding system status and repairs, • Identify potential issues and recommend preventative maintenance or system upgrades, • High school diploma or equivalent (technical or trade school preferred), • 3+ years of hands-on boiler maintenance and repair experience, • Strong understanding of hydronic systems, piping, controls, and combustion, • Ability to read blueprints, schematics, and technical manuals, • Valid driver’s license with a clean driving record, • Boiler Operator License or experience, • Strong troubleshooting and problem-solving skills, • Excellent time management and organizational abilities, • Professional customer service and communication skills, • Physically able to lift equipment, climb ladders, and work in mechanical rooms Get to know our company and grow your career with employment at a JCMLiving community. Enjoy our comprehensive financial and benefit packages as well as the support of an experienced and dedicated management team. Our comprehensive benefit package assists our employees to live their best life and grow both personally and professionally. Join our team of passionate and dedicated professionals for a career that will satisfy and enrich your life. JCMLiving is an equal opportunity employer with opportunities in NJ, PA & MD. Please check out our properties and events online at: . Benefits of Employment with JCMLiving • Competitive salary, • Medical coverage, • Dental coverage, • Vision coverage, • 401K, • Life insurance, • Paid sick, holiday, and vacation time EQUAL OPPORTUNITY EMPLOYER & EQUAL HOUSING PROVIDER

Job DescriptionPROSTAR Staffing has partnered with a well-known logistics and distribution company in New Brunswick, NJ. We are now hiring Machine Operators / Quality Control Associates who are team players, versatile, and dependable! Machine Operator / QC Job Summary $17 per hour (starting pay) 1st Shift: 9:00 AM – 5:00 PM (must be flexible with start/end times) Long-term opportunity with potential for growth • Operate warehouse machinery and equipment, • Perform quality control inspections, • Assist with picking, scanning, and inventory tasks Machine Operator / QC Qualifications • High school diploma or equivalent preferred, • Prior warehouse or machine operator experience preferred, • Experience with Order Picker (Cherry Picker), Reach Truck, or EPJ a plus, • Quality Control (QC) experience preferred, • Basic English communication skills required, • Strong attention to detail, • Ability to work independently and follow instructions, • Able to stand, walk, and lift for extended periods, • Comfortable working in a fast-paced warehouse environment Why PROSTAR Staffing? • Friendly, Knowledgeable Staff, • Direct Deposit Programs, • Medical, Dental, Vision Benefit Programs, • 401(k) Program, • Referral Bonus, • Weekly Pay Call or text “CAP” us at (848) 257-1600 to inquire about our great opportunities! Feel free to also visit us in person: 401 Jersey Ave, New Brunswick, NJ 08901 PROSTAR Staffing goal is to create a great talent experience to ensure successful employment for our employees to reach their full potential. We believe in connecting great employees with great companies for a safe & world-class experience for both. #ZIP

Job Description Forklift Operator – Heavy Load Location: Spotswood, NJ Pay: $22.00/hr Schedule: Day Shift | Monday – Friday, 8-5pm Job Summary: We are looking for an experienced Forklift Operator to work with our client in the energy systems industry. This role involves safely moving large, heavy, and high-value materials using a Toyota 4060 forklift. Responsibilities: * Safely operate a Toyota 4060 or similar heavy-load forklift. * Move, load, and unload large and expensive materials around the facility. * Perform daily equipment checks and report issues. * Follow all safety procedures and maintain a clean work area. Requirements: * At least 2 years of forklift experience, preferably with heavy-load equipment. * Must be proficient operating a Toyota 4060 or similar lift. * Valid forklift certification. * Reliable, safety-minded, and able to work as part of a team.

Job Description We Need Forklift Drivers Piscataway NJ Area Reach Truck, Sit-Dow, and Electric Pallet Jack Temp-to-Hire positions $19 p/h [$20 after 30 days] Job Description: A Forklift Operator is responsible for moving materials within the warehouse and the loading/unloading of materials onto or from vehicles utilizing a (Crown experience preferred) reaches truck, order picker, electric pallet jack or other heavy material handling equipment as required. The Forklift Operator is also responsible for receiving, storing, picking, packing, verification, shipping, and other various duties as assigned to ensure the full and efficient operation of the National Distribution Center. RESPONSIBILITIES: • Use Reach Truck, Cherry Picker or Electric Pallet Jack (Crown experience preferred) to load and unload designated trailers., • Move product manually as required., • Verify and receive materials into inventory., • Duties may also include palletizing and shrink wrap., • Use MHE to move and store materials within the warehouse., • Use MHE to pick, verify and pack orders according to operational standard practice., • Use MHE or other designated equipment to load goods into trailers or other transport vehicles used for distribution., • Conduct Pre and Post audits of MHE., • Ability to lift heavy materials., • Ability to stand, bend, and lift for extended amounts of time., • Adhere to Company's Quality, Safety, Health and Environment Program policies and procedures., • Perform other job duties as needed. SKILLS AND EXPERIENCE: • High School Education or Equivalent, • 1 year forklift experience required,, • Must be able to drive Reach Truck, Sit-Dow, and Electric Pallet Jack.(Crown experience preferred), • Basic computer skills, Text (908) 402-1400 with any questions.

Job Description Job Description Date 06/2025 Location 1300 Airport Road – Van Dyke Title Operator, Forklift Department Operations Reports to Manager, Warehouse FLSA (Exempt or Non-Exempt) Non-Exempt Role Overview The Forklift driver will perform all functions related to receipt of goods, put-away into warehouse, replenishment of pick areas, manual order processing, order auditing, shipment preparation, pallet building, truck loading and cycle counting inventory. All functions may require use of powered industrial trucks, SAP or RF as needed. Areas of Responsibility • Receives product from domestic and overseas vendors, transfers, customer returns, refused shipments, and non-inventory support products., • Accurately audits and verifies all incoming quantities for entry into computerized inventory., • Performs on and off-site warehousing duties to include: the initial movement of materials to appropriate locations, effective space utilization, and material retrieval delivery, using powered industrial equipment as needed., • Performs order fulfillment duties to include: reviewing and prioritizing available orders, determining stock requirements and maintaining levels of required inventory, physically picking and packing orders, auditing and verifying picked orders, preparing completed orders for shipping, using SAP and RF as needed., • Performs shipping duties to include: Locating pallets to the dock, performing dock audits, verifying driver information, loading shipments on to trucks, properly filling out and signing BOL, tracking shipments, using SAP and RF as needed., • Ensures safety and quality standards are consistently followed., • Performs sortation duties to include: lifting cartons at sortation, palletizing cartons, printing pallet tickets, moving freight to the dock, using SAP and RF as needed., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Handles start up and shut down duties pertaining to equipment at the beginning and end of each shift., • Maintains proper gowning and hygiene to ensure integrity of the product as per company policies., • Works extended hours and occasional weekend overtime., • Works in a safe and responsible manner in order to create an injury-free and incident-free workplace. Complies with all job-related safety and other training requirements. Education & Qualification: • High school graduate or GED equivalent, • 2+ years in distribution/warehousing, • Minimum of one (2) year work experience in nutritional’s, supplements, food or pharmaceutical manufacturing industries, • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards etc., • Mechanically inclined to understand inner workings of equipment., • Demonstrates the ability to read and write basic English in order to be able to understand the industry regulated instruction sheets., • Prior experience driving sit-down and stand-up PITs and ticketing experience helpful, • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on production floor a minimum of 6 hours per shift, • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment., • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employee can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. 1st shift 8:30 am to 5:00 pm 9:00 am to 5:30 pm 9:30 am to 6:00 pm

Job Description Cryopak is an innovative, cold chain & temperature-controlled packaging solutions manufacturer, for pharmaceutical, life science, biotech, food, and electronic companies. Cryopak helps to maintain the integrity of our customer’s products through the design, testing and manufacturing of packaging and materials for shipping cold chain products. We also provide the hardware and software for temperature verification along the distribution process. HOW YOU WILL CONTRIBUTE (Overview & Key Responsibilities): Our Forklift Operator is responsible for operating a forklift to move, relocate, stack, and count merchandise. The Operator is accountable for the safe and efficient operation of the vehicle and may also be required to fill. • Unload inbound shipments safely and move product to storage locations. Efficiently stack and store the product in the appropriate areas., • Pull and prepare product for shipment, ensuring that the exact number and type of product is loaded and shipped., • Load, unload, move, stack and stage product and materials using a forklift., • Maintain the facility’s equipment and materials in a neat, clean, and orderly fashion. Operate all equipment in a safe and efficient manner following prescribed safety policies., • Ensure inbound and outbound shipments are accurate and free of damage. Report quality variances., • Efficiently move product from staging and /or staging areas into trailers., • Ensure proper stock rotation and keep appropriate records and reports to guarantee that tight inventory control and security are maintained., • High School Diploma or GED equivalent, • Must have 1-2 years previous forklift operating experience, • Ability to lift up to 50 lbs. multiple times daily, • Bilingual (English/Spanish) is a plus, • Must be able to perform basic mathematical operations., • Good organizational skills with the ability to multitask., • Ability to perform assignments in accordance with established safety policies and procedures., • Must be able to work in a team environment., • Good interpersonal and communication skills. At Cryopak, we strive to offer a comprehensive benefits package that helps you and your family maintain health and well-being -both physically and financially. Our comprehensive benefits package includes: • Medical Insurance, • Dental Insurance, • Vision Insurance, • Health Savings Account (HSA), • Flexible Spending Account (FSA), • Voluntary Accident, Critical Illness, and Hospital Indemnity Insurance, • Voluntary Life and AD&D, • Short-Term Disability, • Pet Insurance, • Commuter Transit Benefits, • 401(k) Retirement Plan w/Safe Harbor Employer Contribution, • Paid Holidays, • PTO It is Cryopak’s policy that equal employment opportunity be provided without regard to age, race, creed, color, religion, sex, disability, pregnancy, medical condition, genetic information, marital status, sexual orientation, gender identity or expression, ancestry, national or ethnic origin, citizenship status, military status or status as a disabled or protected veteran, or any legally recognized status entitled to protection under applicable federal, state, or local laws.

Job Description The Cherry Picker Operator is responsible for safely operating cherry picker equipment primarily within warehouse environments. This role involves frequent work at significant heights to assist with load handling and material placement. The operator ensures efficient and secure movement of goods without the need for travel between multiple locations. Responsibilities • Operate cherry picker equipment to lift and position loads, • Handle and secure materials safely during transport, • Perform routine equipment inspections and report any issues, • Follow safety protocols for working at heights, • Coordinate with warehouse staff to ensure smooth operations Preferred Qualifications • 1+ years of experience in heavy equipment operation, • Previous experience operating cherry pickers, • E-Verify, • Background check

Job Description An international plant-based manufacturing company is seeking a first shift Production Assistant. Food manufacturing experience required. • $19/hr. Plus full benefits, • 1st shift: Tuesday – Saturday 06:00 a.m. – 03:00 p.m., • Somerset, NJ Requirements of the Production Assistant: • Experience in working in factory production environment, preferably in food manufacturing, • HS Degree or equivalent required, • Physical strength and dexterity to lift, move, and handle equipment, • Proficient in Microsoft Office Suites, • Able to communicate, read, and understand in English, • Knowledge of the applicable processes and related equipment Responsibilities of the Production Assistant: • Monitor production lines and GMP areas and report issues to the supervisor, • Log line stops and losses via Teams, • Contact Maintenance or QC as needed, • Follow SOPs, SSOPs, and company policies, • Flag noncompliance and unusual data in records, • Support training for new line workers, • Keep workspace clean and safe, • Enter and manage production data, • Ensure daily production goals are met Employment Type: Direct Hire Schedule: 1st shift Tuesday – Saturday 06:00 a.m. – 03:00 p.m. Friday and Saturday off Production assistant, machine operator, production, Company DescriptionTriCom Quest is a full-service employment agency serving the greater Los Angeles area. We partner with a wide range of industries, with a special focus on international companies, helping fill roles from entry level to executive leadership. Our mission is to connect employers with the right talent—and to help job seekers find positions where they can thrive and grow.TriCom Quest is a full-service employment agency serving the greater Los Angeles area. We partner with a wide range of industries, with a special focus on international companies, helping fill roles from entry level to executive leadership. Our mission is to connect employers with the right talent—and to help job seekers find positions where they can thrive and grow.

Job DescriptionJob Title: Machine Operator Job Description The Machine Operator supports the safe and efficient operation of slitting machines in a fast-paced manufacturing environment. This role works closely with a Lead Machine Operator to set up, run, and monitor machines according to work orders and quality standards. The position is hands-on and mechanically focused, requiring strong attention to detail, the ability to follow instructions accurately, and a commitment to safety and teamwork. Responsibilities • Assist the Lead Machine Operator with the safe and efficient operation of slitting machines in accordance with established training standards and procedures., • Follow work order instructions carefully and translate product specifications into correct machine settings and operating procedures., • Set up, adjust, and monitor slitting machines during production to maintain consistent quality and output., • Inspect finished goods to ensure they meet work order requirements, dimensional specifications, and quality standards., • Identify non-conforming materials or products and promptly notify the appropriate supervisor or department manager., • Use measurement tools and tape measures to verify product dimensions and apply data to machine settings with supervisory support as needed., • Complete assigned tasks within work order time estimates and daily production schedules to help meet production goals., • Handle production materials, packaging, and general labor tasks related to machine operation and product flow., • Maintain a clean, organized, and safe work area around machines and production equipment., • Follow all safety procedures, use required personal protective equipment (PPE), and participate in safety training., • Communicate effectively with Lead Machine Operators, production team members, and supervisors to coordinate workflow and resolve issues., • Perform additional duties as assigned to support the production team and overall manufacturing operations.Essential Skills, • 1 year of factory or manufacturing experience preferred, especially in production, machine operation, or general production environments., • Experience with machine operating tasks such as setup, monitoring, and basic adjustments in a manufacturing setting., • Ability to use and understand measurement tools, including tape measures and handheld measuring tools, and apply data to machine settings with supervisory support., • Ability to read and interpret work orders and translate specifications into practical machine settings and procedures., • Strong command of English, both written and spoken, to understand instructions, safety procedures, and production documentation., • Basic math skills to perform measurements, calculations, and checks related to product dimensions and machine settings., • Physical ability to lift 50+ lbs as needed in a production environment., • Ability to stand for long periods and remain active throughout the shift., • Ability to walk, sit, bend, and talk on the phone as needed to perform daily tasks and communicate with team members., • Ability to sit at a desk for extended periods when required for documentation or communication tasks., • Strong attention to detail and quality when inspecting materials and finished goods., • Reliability and consistency in following safety procedures and production guidelines.Additional Skills & Qualifications, • Previous experience working with slitting machines or similar tape-slitting or converting equipment is a plus., • Background in general labor, packaging, or warehouse environments is beneficial., • Comfort working with industrial equipment and production materials in a fast-moving environment., • Willingness to learn new processes, machinery, and measurement techniques through on-the-job training., • Positive, team-oriented attitude with a focus on collaboration and communication., • Proactive mindset with an interest in continuous improvement and process efficiency., • Ability to manage time effectively and stay organized in a structured shift environment.Why Work Here? You will join a safety-driven organization that puts a “Safe to the Core” mindset at the center of its operations, providing thorough training, clear procedures, and the PPE you need to work confidently. The culture emphasizes teamwork, open communication, and mutual support, so you work alongside colleagues who share knowledge and take pride in meeting production goals together. The workday is structured and steady, offering a clear routine in a clean, organized, and efficient industrial setting. You will have the opportunity to stay active, build mechanical skills, and contribute ideas that support continuous improvement and personal growth. Work Environment This is a first-shift position, typically working from 6:30 a.m. to 3:00 p.m. in a fast-moving manufacturing environment focused on safety, teamwork, and precision. You will work around slitting machines, tape-slitting equipment, measuring tools, production materials, and warehouse equipment in an industrial but clean and organized facility designed for efficiency. The role is highly active and hands-on, with most of the day spent standing at machines, inspecting materials, adjusting settings, and completing production tasks. Safety procedures are taken seriously, PPE is provided and required, and machines and work areas are maintained to high standards. Employees receive thorough training before operating equipment and are supported with clear instructions so they are never left guessing. The atmosphere is team-oriented, with regular interaction with Lead Machine Operators, production team members, and supervisors, and it encourages a continuous improvement mindset where employees look for ways to improve processes, take initiative, bring a positive attitude, and grow their skills. Job Type & Location This is a Contract to Hire position based out of North Brunswick, NJ. Pay and Benefits The pay range for this position is $23.00 - $23.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Overview: Character Ambassador s will create memorable and positive experiences for guests of all ages while acting as the eyes and ears of our Looney Tunes and maintain ing character integrity. Pay Rate: $16.00/Hour Responsibilities: * Assist the characters with costume prep to ensure punctuality. * Be ready to answer all guests' questions. * Be atten tive to Looney Tunes characters , looking out for potential pr oblems characters may encounter . * Create positive and memorable experiences for all guests. * Interact with guests, team members, and supervisors on a daily basis. Qualifications: * At least 16 years of age * Safety c onscious * Strong m ultitasking skills * Must have excellent customer service skills * Must be able to initiate and conduct fri endly interactions with guests and cooperate wit h all team members and managers * Able to work efficiently in fast-paced environments * Must be able to stand/walk for multiple hours, up to 6 hours at a time and as many as 14 hours a day * Ability to handle the summer heat/work in all weather conditions for extended periods of time * Requires continuous standing, bending, hand/eye coordination, near vison, hearing and speech * Requires frequent walking, lifting, kneeling, manual dexterity, gross mo tor skills and color definition * Requires using a telephone/radio * Ability to communicate effectively in the English language, including the ability to read, speak, and understand the English language * Must be a vailable to work flexible hours (including weekends) * Must be able to walk up to 5 miles a day * Must be able to lift 25 lbs consistently * Must be able to lift and lower 5 lbs above shoulder level Note: This job description is not intended to be all inclusive. Associates may perform other related duties as required, meeting the on-going needs of the company. Six Flags Entertainment Corporation is North America's largest regional amusement-resort operator with 27 amusement parks, 15 water parks and nine resort properties across 17 states in the U.S., Canada and Mexico. Focused on its purpose of making people happy, Six Flags provides fun, immersive and memorable experiences to millions of guests every year with world-class coasters, themed rides, thrilling water parks, resorts and a portfolio of beloved intellectual property such as Looney Tunes®, DC Comics® and PEANUTS®. What's in it for you? * Free Food for Memorial Day, Fourth of July and Labor Day * Exclusive Rides parties for all employees. * Scholarship Opportunities * Professional Development * Complimentary tickets * In-Park discounts and more! Other Functions: All other duties assigned or necessary to support the park as a whole. While this job description is intended to be an accurate reflection of the requirements of the job, management reserves the right to add or remove duties when circumstances (e.g., emergencies, changes in workload, rush jobs, or technological developments) dictate. Six Flags is an Equal Opportunity Employer and supports a Drug Free Work Place.

Overview: The Foods Warehouse position is physically demanding; manual labor is required. The Foods Support team is responsible for providing support to the Food Service department through ice production and delivery, beverage machine maintenance and novelty food storage and delivery. This position requires a valid drivers license and you must be 18 years of age or older. * Certain shifts begin as early as 6 am or go until 1 hour prior to park closing* Foods Support Associates are required to interact with guests, other Associates, leads, and supervisors on a daily basis. Additionally, Foods Support Associatess are required to continuously work outdoors and closely with others. Support staff will be required to work in the park when needed and must pass all Associates and cash handling trainings. Occasionally will work alone. Will always be exposed to direct sunlight, dust, dirt, and water. Must be able to function in all weather conditions for long periods of time. Foods Ice House/Support Host/Hostess must be willing to help in the park when needed. This may include but is not limited to, food safety, cash handling, interacting with guests, and providing excellent service. Pay Rate: $16.50/Hour Responsibilities: * Must be able to promote the park with the utmost enthusiasm and pride while providing support to the Foods Department through ice production and delivery. * Maintain the production of ice and delivery to food stands throughout the park. * Delivery of ice via the use of park vehicles, hand trucks and manually. * Bagging and lifting ice and operating lift equipment. * Maintain a safe and clean work area. * Maintain proper attendance and timelines. * Required to attend work in full grooming guidelines. * Required to stay in uniform w/ the exception of when in the support area. * Ensure guest safety and satisfaction in their stay at Six Flags. * Resolve Guest concerns that may arise on a daily basis. * Ensure standards of performance for all areas within their responsibilities are met. * Respond to any emergency situation in the area and maintain control until an area supervisor arrives. * Ensure that image, cleanliness and courtesy standards requirements are met. * Refrain from consuming any substance that may impair judgment. * Cooperate with all Associatess and managers. * Answer guest questions and give proper guidance. * Complete any and all tasks as requested by Six Flags Management. * Respond to emergencies with appropriate action, maintain control and notify supervisor. Qualifications: * At least 18 years of age. * Must posses a valid driver's license to drive park vehicles. * Able to communicate effectively in the English language, including the ability to read, speak, and understand the English language. * Available to work flexible hours at nights, weekends and holidays. * Must have good customer service skills. * Requires continuous sitting or standing, bending, eye/hand coordination, near vision, hearing, and speech. Requires frequent kneeling, manual dexterity, gross motor skills, and color definition. Requires using a telephone. Must be able to read and write English. Requires some lifting, sitting, standing, walking, bending, eye/hand coordination, near vision, hearing, and speech. Requires frequent kneeling, manual dexterity, gross motor skills, and color definition. Requires using telephone. Must be able to read and write English. * Must be able to stand/walk for up to 6 hours at a time and as many as 14 hours a day. * Must be able to walk up to 3 miles per day over various surfaces. * Must be able to lift 50 lbs consistently. * Must be able to lift and carry 50 lbs over 25 feet over various surfaces. * Must be able to lift and lower 50 lbs above shoulder level. * Must be able to climb a stepladder up to 6 ft. in height. Note: This job description is not intended to be all inclusive. Associates may perform other related duties as required, meeting the on-going needs of the company. Six Flags Entertainment Corporation is North America's largest regional amusement-resort operator with 27 amusement parks, 15 water parks and nine resort properties across 17 states in the U.S., Canada and Mexico. Focused on its purpose of making people happy, Six Flags provides fun, immersive and memorable experiences to millions of guests every year with world-class coasters, themed rides, thrilling water parks, resorts and a portfolio of beloved intellectual property such as Looney Tunes®, DC Comics® and PEANUTS®. What's in it for you? * Free Food for Memorial Day, Fourth of July and Labor Day * Exclusive Rides parties for all employees. * Scholarship Opportunities * Professional Development * Complimentary tickets * In-Park discounts and more! Other Functions: All other duties assigned or necessary to support the park as a whole. While this job description is intended to be an accurate reflection of the requirements of the job, management reserves the right to add or remove duties when circumstances (e.g., emergencies, changes in workload, rush jobs, or technological developments) dictate. Six Flags is an Equal Opportunity Employer and supports a Drug Free Work Place.

Job Description Location: North Brunswick NJ As we continue to grow, we’re looking for an experienced CDL A/B Driver with Boom Truck Operation experience to join our NJ team. If you’re reliable, safety-conscious, and take pride in delivering materials with care, we want to hear from you. Position Overview As a CDL Driver and Boom Truck Operator, you will be responsible for transporting glass and related materials from our facility to customers. You’ll ensure secure, efficient delivery using boom/crane equipment, always adhering to safety and DOT regulations. Key Responsibilities • Safely load and unload materials from warehouse to job sites using crane as needed., • Operate boom equipment following all safety guidelines., • Secure and inspect loads to ensure compliance with DOT weight, capacity, and safety regulations., • Maintain clean, safe, and operational delivery vehicles; report any maintenance needs promptly., • Assist warehouse loaders and forklift operators during loading and unloading., • Deliver products on time and verify delivery manifests for order accuracy., • Interact professionally with customers and represent Blue Star Glass with integrity., • Valid CDL Class A or B (Boom Truck certification or Forklift Certification highly preferred), • Clean driving record and current DOT medical card, • Minimum 1 year of truck driving experience, ideally with flatbed and boom operation, • Flexible availability for occasional off-hour deliveries (no overnights required), • Must be able to lift 100 lbs and work in various weather conditions, • Bilingual (English & Spanish) strongly preferred IaZta0zumZ

Job Description The Warehouse Operator will coordinate and execute the activities and operations of the warehouse. Supervisory Responsibilities: • None. Duties/Responsibilities: • Manages warehouse inventory and maintains database., • Coordinates and schedules the movement of products throughout the warehouse including storage and shipment of finished products., • Implements daily production and shipping plan, arranging for excess stock to be stored in warehouse., • Manages daily flow of finished products by modifying storage space assignments., • Confirms availability of items to be shipped by verifying inventory records or conducting inventories of required items., • Manually handles, repacks, or restacks pallets of finished product as needed., • Operates forklift as needed., • Documents all related activities and completes forms and reports., • Deliver products to customers as needed., • Performs other related duties as directed. Required Skills/Abilities: • Excellent verbal and written communication skills., • Excellent organizational skills and attention to detail., • Basic understanding of or ability to quickly learn company product codes and terminology., • Thorough understanding of warehouse policies and procedures., • Good analytical skills and ability to make sound judgments relative to inventory., • Bilingual (English & Spanish) Education and Experience: • High school diploma or equivalent required., • Valid state motor vehicle operators license., • Forklift certification required within 2 weeks of hire date. (Paid by Company), • At least one year of work experience in a warehouse required. Physical Requirements: • Must be able to lift up to 50 pounds at times., • Ability to move around the warehouse.

Job DescriptionSalary: Job Overview: We are seeking a skilled and motivated Sewer Team Operator / Pipe Installer to join our dynamic team. In this role, you will be responsible for operating sewer installation equipment and performing essential pipe installation tasks on sewer systems. You will work closely with a team of professionals to ensure the efficient, safe, and high-quality installation of sewer pipes and related infrastructure. If you are detail-oriented, have hands-on experience with sewer operations, and thrive in a team environment, we encourage you to apply. Key Responsibilities: • Sewer Pipe Installation: Install and repair sewer pipes, manholes, and related infrastructure, ensuring compliance with all safety regulations and quality standards., • Equipment Operation: Operate heavy machinery and tools such as trenchers, backhoes, and pipe cutters to lay and install sewer lines., • Excavation and Digging: Perform excavation work using manual and mechanical means to create trenches for pipe installation., • Inspection and Maintenance: Conduct inspections on sewer systems, ensuring proper installation and resolving any issues or malfunctions., • Team Collaboration: Work collaboratively with crew members, supervisors, and engineers to achieve installation goals and adhere to timelines., • Safety Compliance: Follow all safety guidelines and ensure that work areas are properly marked, secured, and meet safety regulations., • Troubleshooting: Identify and troubleshoot issues with sewer systems or equipment and perform necessary repairs or adjustments., • Experience: Minimum 5-7 years of experience in sewer system installation, pipe laying, or construction-related fields., • Skills:, • Proficient in operating sewer installation machinery and hand tools., • Knowledge of local sewer codes, regulations, and safety standards., • Ability to read and interpret blueprints, technical drawings, and project specifications., • Strong problem-solving skills and ability to work independently or in teams., • Physical Requirements: Ability to lift heavy materials, work in outdoor conditions, and perform physically demanding tasks for extended periods., • Certification (preferred): Relevant certifications (e.g., OSHA, pipe installation, CDL) are a plus., • Experience in trenching, backfilling, and operating relevant construction equipment., • Familiarity with stormwater systems and other types of underground utilities., • Competitive salary based on experience., • Health, dental, and vision insurance., • Paid time off and holidays., • Opportunities for career growth and training.

Job Description Job Description Date 05/2018 Location 1300 Airport Road, North Brunswick NJ Title Operator, Packaging Department Packaging Reports to Supervisor, Packaging FLSA (Exempt or Non-Exempt Non-Exempt Role Overview The Packaging Operator is responsible for safely operating the packaging equipment to package in process products in accordance with company standard operating procedures and the packaging order. The position includes set up, operation, cleaning, and preventative maintenance of all related equipment. Operators must be capable of operating multiple like machines at one time and learning to operate a variety of equipment within the packaging work rooms. Areas of Responsibility • Follow batch records, SOP’s, and cGMP's guidelines to ensure product specifications and tolerances are met., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Ensures that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing., • Handle start up and shut down duties pertaining to equipment at the beginning and end of each shift., • Load and unload items into packaging machine and remove rejected packages to be isolated as rejects or re-inspection., • Execute packaging processes in accordance with packaging record/work orders., • Troubleshoot and make appropriate adjustments to machine to maintain packaging specifications., • Responsible for disposal of rejected tablets and packaging components in the designated area., • Responsible to clear any jams that do not require a mechanic, • Dismantle and clean any accessories and equipment while also maintaining a clean work area., • Fill in appropriate logbooks for equipment and rooms., • Perform all material handling of products and components., • Correctly document all steps on batch record., • Maintain proper gowning and hygiene to ensure integrity of the product as per company policies., • Works extended hours and occasional weekend overtime., • Other duties as assigned. Other Responsibilities Including Safety: Education & Qualification: • High school graduate or GED equivalent and/or 1+ years in bottle, blister, and other assorted tablet packaging, • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards etc., • Mechanically inclined to understand inner workings of equipment., • Ability to lift up to 35 lbs.; occasionally lift and move up to 50 pounds., • Must stand and walk on production floor a minimum of 8 hours per shift, • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be able to lean over equipment as well as kneeling on the floor to clean under the equipment., • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employee can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. shift schedule 3rd shift 11:30 PM to 8:00 AM Job Description Acknowledgement I have read and understand the job requirements, responsibilities, and expectations set forth in the job description provided for my position. I attest that I can perform the essential job functions as outlined with or without any reasonable accommodations. This Job Description has been reviewed with my supervisor. 3rd shift 11:30 PM to 8:00 AM

Job Description ABOUT THE COMPANY Playa Bowls is New Jersey's Original Acai Shop, founded in 2014, and our mission is to bring superfruit bowls to the masses using only the freshest, highest quality ingredients while providing a fantastic in-store brand experience. What began as a pair of blenders, a patio table, and a fridge has flourished into a 300+ unit operator and franchisor of the leading fast casual restaurant concept. Playa Bowls added 85 locations in 2025 and are on target to add 90+ new locations in 2026. Our continued rapid growth has created the opportunity for an individual who will help us with continuing to grow our brand! WHAT WE OFFER • Competitive Pay + Tips: Enjoy a competitive hourly wage along with both credit card and cash tips — your hard work pays off!, • Professional Development: Our comprehensive Playa Bowls training program helps you build valuable skills that will benefit you in any career path., • Vibrant Work Culture: We keep energy high with a fun, upbeat environment where dancing, smiling, and having a good time are part of the job., • Employee Discounts: While on shift, enjoy 50% off and one free bowl. When you're off the clock, you still receive 30% off — it's a win-win! You're a positive, enthusiastic, and people-focused individual with a passion for superfoods, healthy living, and (of course) fruit! As a Shift Leader at Playa Bowls, you serve as an extension of the management team and are trusted to oversee shop operations in the absence of a manager. You’re confident in delegating tasks, leading by example, and making decisions that prioritize the needs of the shop and the team. If you thrive in a fast-paced environment, are motivated by growth, bring an entrepreneurial mindset, and appreciate the occasional playful food pun — we’d love to have you on the team! WHAT YOU’LL DO • Oversee food quality throughout your shift, ensuring freshness and discarding products when necessary, • Delegate tasks efficiently and responsibly to support smooth operations and team productivity, • Lead and manage all aspects of opening and closing shifts with consistency and attention to detail, • Handle and process customer refunds accurately and professionally, • Address and resolve guest concerns in a courteous, solution-oriented manner, • Monitor and record inventory levels throughout the shift, including end-of-day counts, • Accurately count and reconcile the register, safe, and daily deposits, • Maintain clear and timely communication with management regarding shift updates or operational issues, • Ensure all tasks are completed efficiently and aligned with company standards and procedures, • Act as a role model by embodying and promoting the Playa Bowls mission, purpose, and core values WHAT YOU’LL BRING • Committed to delivering exceptional customer service by providing friendly, attentive service and ensuring satisfaction with every guest interaction., • Ability to lead by example and adhere to company policies to foster a positive and collaborative work environment and support team development., • Proven ability to remain flexible and adaptable in a fast-paced dynamic environment, quickly adjusting to changing priorities and customers’ needs to maintain seamless operations., • Skilled at prioritizing multiple responsibilities simultaneously, such as managing team productivity and assisting with customer service., • Clear and effective communication with team members, managers, and customers with the ability to delegate tasks and provide instructions concisely., • Ability to stay composed and think quickly under pressure, handling disputes or challenges among team members or customers professionally and calmly, • Demonstrate empathy, understanding and active listening skills when addressing concerns or ideas towards team members and customers, • Availability to work a minimum of 5 shifts per week, totaling at least 30 hours., • Must be available weekends but expected to work as the business dictates, • Must be able to remain in a stationary position for prolonged periods of time, • Must be able to lift or otherwise move 25-40 pounds occasionally, • Must be able to retrieve items from high and low shelving, the fridge/freezer, and under counters., • Must be able to tolerate occasionally loud environments (high powered blenders, timers, and order notifications). Inspire and support our communities one bowl at a time. VALUES Real Deal. Playa Passion. Powerhouse. Big Wave Chaser. Dawn Patrol “Playa Bowls is an equal opportunity employer committed to inclusivity and diversity in our workplace and all aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate on the basis of race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law.”

Job DescriptionDescription: Falcon Manufacturing, a division of NOA Brands America, Inc., is a custom fabrication facility for sheet metal, tubing, and wire components. Falcon provides economical manufacturing to large volume clients through our highly trained staff, advanced manufacturing technology, on-time delivery, and competitive pricing. Job Description: Falcon is looking to add Material Handler/ Forklift Operator to our team. Responsibilities: · Load/unload material from trucks independently. · Operate material handling equipment as needed indoor/outdoor in tight spaces · Load and unload materials between departments within the facility and production workstations with forklift and/or pallet jack · Reports to Department Manager. · May perform other related duties or work at a different workstation as production needs require. Requirements: · Valid forklift certificate is required · Minimum 1 year of experience in manufacturing · Minimum 1 year of experience operating forklift · Ability to work independently and in a team environment · Ability to meet productivity standards, completing work in a timely manner · Ability to thrive in an evolving, fast-paced, deadline-driven environment · Dependable · Regularly lift, push, or pull up to 25 pounds, occasionally up to 50 pounds and more. · Energetic and eager to learn Bonus Points: · Experience in metal shop production · Basic Microsoft Office (Word, Outlook) Location: Somerset, NJ Job Type: Full-time, first shift Monday to Friday, from 6:00am to 2:30pm · Overtime as needed Benefits · Medical/Dental/Vision Insurance · Company Paid Basic Life and AD&D Insurance · Voluntary Benefits (Supplemental Life Insurance, LegalShield, and more) · Company Paid Long-term Disability · 401K with Company Match · Paid Vacation and Sick Time · 9 Paid Holidays Pay: hourly, from $17.00-$20.00 DOE

Job Description About us! Paragon Staffing, LLC takes the stress and trouble away from finding each individual the right employment opportunity! Apply Today! Job description Shipping & Receiving/ Forklift Operator SUMMARY OF POSITION To keep accurate records to all materials received and inventoried. Inspect shipments, and reconcile packing slips or manifests with actual items, and verify that materials are delivered to correct departments or properly stored in warehouse. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.  Review all incoming items, inspecting them for quality, and ensuring proper paperwork is received.  Enter all raw materials into MAS 500 system, verify entry, and post transactions.  Locate and consolidate received materials to a bin location in the warehouse.  Work closely with other departments to ensure a steady flow of materials needed to meet customer demand.  Move materials, supplies, and finished goods to designated places in the facility, using hand trucks, forklifts, etc.  Use of a handheld scanner to track and locate all materials.  Maintains thorough knowledge of assigned processes and equipment.  Reports any process and equipment problems to the attention of upper management and/or the Maintenance Supervisor.  Responsible for all processes, equipment, employees, safety, and housekeeping of the area and meeting quality and quantity standards.  Recommends measures to improve production methods, equipment performance, and quality of product.  Recognize non-confirming goods and to inform Quality Assurance Manager.  Effective utilization of required systems, including HQMS, Sage 500 ERP/DSCS, and handheld scanners.  Ensures established safety protocol is followed. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. JOB REQUIREMENTS  The ability to maintain computerized inventory system promptly and accurately.  Ability to work effectively with all levels of employees and management. Have a good command of the English language.  Experience operating powered industrial trucks, including forklifts, Order Pickers, Walkies, Trans-Stackers, and Clamp Trucks. Certification is desirable.  Ability to read and interpret work orders for processing.  Ability to use simple math and basic hand help measuring tools.  Strong organizational and planning skills.  High school diploma or equivalency degree. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, light to moderate physical effort is required. Ability to lift or maneuver materials in excess of 45+lbs. Regularly required to stand, reach and move about the facility. WORK ENVIRONMENT This is a fast-paced work environment with consistent pressure to complete duties as outlined above which requires ability to manage multiple projects at a detailed level and provide support to many internal departments in a fast-changing environment. Many duties listed above are time-sensitive and have strict deadlines for completion. Work performed in a Warehouse Manufacturing/Distribution Plant environment. Exposed to any number of elements but with none present to the extent of being disagreeable. Job Type: Full-time Salary: - $20.00 per hour Schedule- First Shift Location : North Brunswick, NJ Language: • English (Required) Work Location: In person Powered by JazzHR B7D5KGWA7a

Job Description Job Description Date 06/2025 Location 1300 Airport Road, North Brunswick NJ Title Operator, Compression & Encapsulation Department Standard Manufacturing Reports to Production Supervisor FLSA (Exempt or Non-Exempt Non-Exempt Role Overview The Compression and Encapsulation Operator is responsible for the operation and set-up of tablet compression machines and set-up of automatic capsule filling machine in accordance with company standard operating procedures (SOPs) and cGMP regulations to ensure products meet applicable quality standards. This position includes set-up, operation, cleaning, and light mechanical adjustments. The Operator is accountable for overall production line performance including safety, quality, shrink, attainment, and line efficiency. Operators must be capable of operating multiple like machines at one time and learning to operate a variety of equipment within the manufacturing area. Areas of Responsibility Level 1 • Makes necessary machine adjustments to ensure the smooth operation of the lines for required quality and quantity., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Ensures that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing., • Utilizes problem-solving skills to identify and report to the team lead or supervisor troubleshoot product issues., • Disassembles, cleans/ sanitizes, and reassembles all required equipment., • Meets all safety expectations and follows all safety practices., • Maintains proper gowning and hygiene to ensure integrity of the product as per cGMP’s and company policies., • Must be able to work extended work hours and weekend overtime., • Makes necessary machine adjustments to ensure the smooth operation of the lines for required quality and quantity., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Ensures that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing., • Utilizes problem-solving skills to investigate and troubleshoot product issues and recommend solutions for: 1. tableting issues such as sticking and picking, capping, chipping, compressibility, delamination, disintegration, and black spots on surface, 2. general issues such as machine set-up, machine performance, and documentation. • Cross-trains in other areas to be able to support the manufacturing process as needed., • Disassembles, cleans/ sanitizes, and reassembles all required equipment., • Meets all safety expectations and follows all safety practices., • Maintains proper gowning and hygiene to ensure integrity of the product as per cGMP’s and company policies., • Must be able to work extended work hours and weekend overtime., • Makes necessary machine adjustments to ensure the smooth operation of the lines for required quality and quantity., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Ensures that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing., • Assists supervisor in completion of deviation reports that outline both short- and long-term corrective action steps., • Utilizes problem-solving skills to investigate and troubleshoot product issues and recommend solutions for: 1. tableting issues such as sticking and picking, capping, chipping, compressibility, delamination, disintegration, and black spots on surface, 2. general issues such as machine set-up, machine performance, and documentation. • Performs basic and routine maintenance activities., • Cross-trains in other areas to be able to support the manufacturing process as needed., • Disassembles, cleans/ sanitizes, and reassembles all required equipment., • Meets all safety expectations and follows all safety practices., • Maintains proper gowning and hygiene to ensure integrity of the product as per cGMP’s and company policies., • Must be able to work extended work hours and weekend overtime., • Works in a safe and responsible manner to create an injury-free and incident-free workplace., • Complies with all job-related safety and other training requirements. Education & Qualification: Level 1 Pay Rate $19.00 - $23.00 • High school graduate or GED equivalent, • High school graduate or GED equivalent, • High school graduate or GED equivalent, • 5+ years of experience, • Operate all machines., • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely to detail and accuracy with numbers., • Understands and is knowledgeable of cGMP, OSHA standards etc., • Mechanically inclined to understand inner workings of equipment., • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift, • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment., • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. 11:00 PM to 7:30 AM

Job Description Job Description Date 06/2025 Location 1300 Airport Road, North Brunswick NJ Title Operator, Granulation/ Blending Department Standard Manufacturing Reports to Production, Supervisor FLSA (Exempt or Non-Exempt Non-Exempt Role Overview The Granulation/Blending Operator is responsible for the operation and set up of granulators, drying oven, blenders, screening equipment etc. in accordance with company standard operating procedures. The position includes set up, operation, cleaning, and preventative maintenance of all related equipment. The Operator is accountable for overall performance including safety, quality, shrink, attainment, and production efficiency. Operators must be capable of operating multiple like machines at one time and learning to operate a variety of equipment within the manufacturing area. Areas of Responsibility • Follow batch records, SOP’s, and cGMP's guidelines to ensure product specifications and tolerances are met., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Ensures that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing., • Complete all labeling and inventory movements to ensure accurate inventory control., • Dismantle and clean any accessories and equipment while also maintaining a clean work area., • Train in the operation, cleaning and set-up of the following pieces of equipment as well as new equipment:, • Rapid Mixer Granulator: 100L & 600L and planetary mixer, • Fluid bed dryer/processor, • Tray Drying Ovens, • Fitz mill/Multi mill, • Double cone/V- blenders: 6cu. ft. to 150 cu. ft., • Screening/ sieving equipment, • Fill in appropriate logbooks for equipment and rooms., • Perform all material handling of products and components., • Correctly document all steps on batch record., • Participate in any investigation for a deviation involving a batch record., • Maintain proper gowning and hygiene to ensure integrity of the product as per company policies., • Works extended hours and occasional weekend overtime. Education & Qualification: Level 1 Pay Rate $19.00 - $22.00 • High school graduate or GED equivalent, • 3+ years Granulating/Blending Operator experience, • Minimum of one (1) year work experience in nutritionals, supplements, food, or pharmaceutical manufacturing industries, • 6-12 months experience, • Operates blending, screening & milling machines., • High school graduate or GED equivalent, • 3+ years Granulating/Blending Operator experience, • Minimum of one (1) year work experience in nutritionals, supplements, food, or pharmaceutical manufacturing industries, • 1 years of experience, • Operates 5 machines (blending, milling, sifting, tray dryer and granulation)., • A clear understanding of the principal functions of the blending /granulation department. Certified forklift operator., • High school graduate or GED equivalent, • 3+ years of experience, • Operate all machines., • Must be highly skilled in the proper set up an operation of blenders and granulators., • N/A Skills & Ability • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards etc., • Mechanically inclined to understand the inner workings of equipment., • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift., • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment., • Must be able to wear all PPE including a lab coat, face mask, booties, gloves, safety glasses/goggles, and respirators. Work Environment (Office, Warehouse, temperature extremes, etc.): • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. 2nd shift - 3:00 PM to 11:30 PM

Job Description Job Description Date 10/2025 Location 22 Van Dyke Avenue, New Brunswick NJ 08901 / 1300 Airport Road, North Brunswick NJ 08902 Title Operator, Dispensing Department Dispensing Reports to Manager, Dispensing FLSA (Exempt or Non-Exempt) Non-Exempt Role Overview The Dispensing Operator will perform all functions related to dispensing of material, receipt of goods, put-away material into warehouse aisles, pull out material per Batch card/Pick ticket, put back to same location from where it was pulled for batches, manual order processing, order auditing, shipment preparation, pallet building, transferring material from wood to plastic pallets, and cycle counting inventory. All functions may require the use of powered industrial trucks, Syspro or RF as needed. Will need to work in temperature-controlled areas. Areas of Responsibility Level 1: Dispensing Operator Overview: This is a training-level role for individuals with limited or no prior experience in pharmaceutical dispensing. Works under close supervision while learning company SOPs, GMP standards, and equipment operations. Key Responsibilities: • Assist in pulling and weighing raw materials under supervision., • Learn to read and interpret batch cards and pick slips., • Calibrate scales before use., • Cleans room after batch is complete, • Ensures safety and quality standards are consistently followed., • Maintain basic cleanliness of work area and equipment., • Support warehouse duties such as material receipt and basic inventory handling., • Follow safety procedures and learn PPE protocols., • Operate pallet jacks or assist with forklift activities (if certified). Level 2: Dispensing Operator Overview: This level is for operators with hands-on experience in pharmaceutical or supplement dispensing. Operators are responsible for completing batch-related activities with minimal supervision and maintaining documentation compliance. Key Responsibilities: • Dispense raw materials independently per batch cards., • Reviews batch card. Determine material to be used in the batch. Pull out material per requirement and enter in logbooks., • Performs requests received from other departments such as R&D, Production, QA or Purchasing etc., • Cleans room after batch is complete, • Ensures safety and quality standards are consistently followed., • Weigh materials accurately and calibrate scales before use., • Use Syspro or RF systems for inventory control., • Handle, put-away, return, and transfer of goods between warehouse locations., • Perform manual order processing, auditing, and preparation for shipments., • Maintain gowning and hygiene protocols in controlled environments., • Ensure accurate documentation in logs and batch records. Level 3: Dispensing Operator Overview: A highly experienced operator who may act as a team lead or trainer. Oversees batch dispensing activities, ensures compliance, and supports continuous improvement initiatives. Key Responsibilities: • Lead batch dispensing operations; verify materials and documentation., • Train and mentor entry and intermediate-level operators., • Collaborate with cross-functional teams (QA, R&D, Production)., • Reviews batch card. Determine material to be used in the batch. Pull out material per requirement and enter in logbooks., • Performs requests received from other departments such as R&D, Production, QA or Purchasing etc., • Cleans room after batch is complete, • Ensures safety and quality standards are consistently followed., • Conduct cycle counts and helps manage inventory accuracy., • Troubleshoot equipment or material issues; escalate when necessary., • Lead compliance audits for dispensing areas., • Support continuous improvement, safety, and 5S initiatives. Physical & Environmental Requirements (All Levels): • Able to lift 55 lbs regularly; occasionally up to 75 lbs., • Stand/walk for 6+ hours per shift., • Work in temperature-controlled rooms with PPE (lab coat, gloves, face mask, respirator, etc.). Requirements Education & Qualification: Level 1: Dispensing Operator • High school diploma or GED., • 0–1 year of experience in manufacturing or warehouse setting., • Basic math and English reading skills., • Willingness to learn cGMP, OSHA, and SOPs. Level 2: Dispensing Operator • High school diploma or GED., • 2+ years of experience in a pharmaceutical production environment., • Forklift operation experience (certification preferred)., • Familiarity with cGMP and SOP documentation standards., • Attention to detail and ability to troubleshoot basic dispensing issues. Level 3: Dispensing Operator Requirements: • High school diploma or GED; technical certification a plus., • 4+ years of dispensing experience in a GMP-regulated and within a pharmaceutical production environment, • Strong understanding of regulatory compliance (FDA, GMP, OSHA)., • Proven ability to lead teams and communicate effectively., • Proficient in inventory software (Syspro or similar ERP systems)., • Additional experience in granulation, compression, or blending is a strong plus. Certifications, Licenses, Credentials: • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards, etc., • Mechanically inclined to understand the inner workings of the equipment., • Demonstrates the ability to read and write basic English to be able to understand the industry-regulated instruction sheets., • Ability to lift up to 55 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift, • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment., • Must be able to wear all PPE including a lab coat, face mask, booties, gloves, safety glasses/goggles, and respirators. Work Environment (Office, Warehouse, temperature extremes, etc.): • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment 1st shift - 7:00 am to 3:30 pm

Job Description While we may not have an immediate opening for this role, we welcome your interest and can contact you when a job is available. Hours/Shift: • Hours/Shift: 1st Shift from 6:00am – 2:30pm As a Machine Operator, you will perform skilled work in the setup, operation, basic maintenance and repair of manufacturing and/or packaging equipment to safely and effectively produce Temperature Control Packaging and related goods as per quality policy and manufacturing Procedures. • Setup and operate manufacturing and/or packaging equipment., • Load and feed machinery with specified raw materials and parts., • Perform basic repairs and maintenance as needed during production hours and coordinates with Maintenance Mechanic to perform advanced troubleshooting and preventive maintenance., • Refer to work order package and procedural instructions for each assignment before commencing work., • Assure all work assigned is performed in accordance with specifications, instructions, and requirements., • Assist in the performance of a variety of manual labor related to production including but not limited to handling, repeated handling, push, pull, lift, assembly, loading and unloading, packing, and palletization of goods., • Perform assignments in accordance with established safety policies and procedures., • Perform any specified quality assurance checks designated for each assignment adhering to quality policies., • Record specified production information thoroughly and accurately in work order package., • Meet production standards within a reasonable time depending on the degree of difficulty of the designated assignment., • High School Diploma or GED equivalent desired, • Bilingual (English & Spanish), • 1+ years’ experience in a manufacturing environment, • Ability to read and understand product specifications, • Forklift experience., • Ability to lift 50-75 lbs., • Ability to perform basic mathematical operations., • Ability to bend, reach, kneel, and stand for extended period of time., • Good multitasking and prioritization skills., • Must be able to work effectively, courteously, and respectfully with coworkers and other personnel., • Ability to work in a team environment., • Good time management skills. We strive to offer a comprehensive benefits package that helps you and your family maintain health and well-being -both physically and financially. Our comprehensive benefits package includes: • Medical Insurance, • Dental Insurance, • Vision Insurance, • Health Savings Account (HSA), • Flexible Spending Account (FSA), • Voluntary Accident, Critical Illness, and Hospital Indemnity Insurance, • Voluntary Life and AD&D, • Short-Term Disability, • Pet Insurance, • Commuter Transit Benefits, • 401(k) Retirement Plan w/Safe Harbor Employer Contribution, • Paid Holidays, • PTO It is our policy that equal employment opportunity be provided without regard to age, race, creed, color, religion, sex, disability, pregnancy, medical condition, genetic information, marital status, sexual orientation, gender identity or expression, ancestry, national or ethnic origin, citizenship status, military status or status as a disabled or protected veteran, or any legally recognized status entitled to protection under applicable federal, state, or local laws.

Job DescriptionDescription: Falcon Manufacturing, a division of NOA Brands America, Inc., is a custom fabrication facility for sheet metal, tubing, and wire components. Falcon provides economical manufacturing to large volume clients through our highly trained staff, advanced manufacturing technology, on-time delivery, and competitive pricing. Job Description: Falcon is looking to add Brake Press Operator to our team. Responsibilities: • Operate and maintain Press Brake machine, • Run production parts independently, • Inspect parts for quality and conformance to blueprint specifications, • Maintains work area and equipment., • Loads and unloads metal blanks., • Reports to Department Manager., • May perform other related duties or work at a different workstation as production needs require.Requirements:, • Minimum 3 years of experience in manufacturing, • Minimum 1 year of experience in operating Cincinnati and Amada Press Brakes, • High School Diploma or Equivalent, • Ability to read blueprints and measure parts., • Ability to meet productivity standards, completing work in a timely manner., • Ability to work independently and in a team environment., • Ability to thrive in an evolving, fast-paced, deadline-driven environment., • Detail-orientated, • Energetic and eager to learn., • Dependable, • Regularly may lift, push, or pull up to 25 lbs. and occasionally up to 50 pounds. Bonus Points: · Experience in metal shop production · Basic Microsoft Office (Word, Outlook) Location: Somerset, NJ Job Type: Full-time, first shift Monday to Friday, from 6:00am to 2:30pm Overtime as needed Benefits · Medical/Dental/Vision Insurance · Company Paid Basic Life and AD&D Insurance · Voluntary Benefits (Supplemental Life Insurance, LegalShield, and more) · Company Paid Long-term Disability · 401K with Company Match · Paid Vacation and Sick Time · 9 Paid Holidays

Job Description Date 11/2020 Location 1300 Airport Road, North Brunswick NJ Title Operator, Granulation/ Blending Operator 1 Department Standard Manufacturing Reports to Production, Supervisor FLSA (Exempt or Non-Exempt Non-Exempt Role Overview The Granulation/Blending Operator is responsible for the operation and set up of granulators, drying oven, blenders, screening equipment etc. in accordance with company standard operating procedures. The position includes set up, operation, cleaning, and preventative maintenance of all related equipment. The Operator is accountable for overall performance including safety, quality, shrink, attainment, and production efficiency. Operators must be capable of operating multiple like machines at one time and learning to operate a variety of equipment within the manufacturing area. Areas of Responsibility • Follow batch records, SOP’s, and cGMP's guidelines to ensure product specifications and tolerances are met., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Ensures that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing., • Complete all labeling and inventory movements to ensure accurate inventory control., • Dismantle and clean any accessories and equipment while also maintaining a clean work area., • Train in the operation, cleaning and set-up of the following pieces of equipment as well as new equipment:, • Rapid Mixer Granulator: 100L & 600L and planetary mixer, • Fluid bed dryer/processor, • Tray Drying Ovens, • Fitz mill/Multi mill, • Double cone/V- blenders: 6cu. ft. to 150 cu. ft., • Screening/ sieving equipment, • Fill in appropriate logbooks for equipment and rooms., • Perform all material handling of products and components., • Correctly document all steps on batch record., • Participate in any investigation for a deviation involving a batch record., • Maintain proper gowning and hygiene to ensure integrity of the product as per company policies., • Works extended hours and occasional weekend overtime. Education & Qualification: • High school graduate or GED equivalent, • 3+ years Granulating/Blending Operator experience, • Minimum of one (1) year work experience in nutritionals, supplements, food, or pharmaceutical manufacturing industries, • 6-12 months experience, • Operates blending, screening & milling machines., • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards etc., • Mechanically inclined to understand inner workings of equipment., • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift, • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment., • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. 2nd sift - 3:00 pm to 11:30 pm

Job Description Date 05/2018 Location 1300 Airport Road, North Brunswick NJ Title Operator, Compression & Encapsulation Department Standard Manufacturing Reports to Production Supervisor FLSA (Exempt or Non-Exempt Non-Exempt Role Overview The Compression and Encapsulation Operator is responsible for the operation and set-up of tablet compression machines and set-up of automatic capsule filling machine in accordance with company standard operating procedures (SOPs) and cGMP regulations to ensure products meet applicable quality standards. This position includes set-up, operation, cleaning, and light mechanical adjustments. The Operator is accountable for overall production line performance including safety, quality, shrink, attainment, and line efficiency. Operators must be capable of operating multiple like machines at one time and learning to operate a variety of equipment within the manufacturing area. Areas of Responsibility • Makes necessary machine adjustments to ensure the smooth operation of the lines for required quality and quantity., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Ensures that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing., • Assists supervisor in completion of deviation reports that outline both short- and long-term corrective action steps., • Utilizes problem-solving skills to investigate and troubleshoot product issues and recommend solutions for: 1. tableting issues such as sticking and picking, capping, chipping, compressibility, delamination, disintegration, and black spots on surface, 2. general issues such as machine set-up, machine performance, and documentation. • Performs basic and routine maintenance activities., • Cross-trains in other areas to be able to support the manufacturing process as needed., • Disassembles, cleans/ sanitizes, and reassembles all required equipment., • Meets all safety expectations and follows all safety practices., • Maintains proper gowning and hygiene to ensure integrity of the product as per cGMP’s and company policies., • Must be able to work extended work hours and weekend overtime., • Works in a safe and responsible manner to create an injury-free and incident-free workplace., • Complies with all job-related safety and other training requirements. Education & Qualification: • High school graduate or GED equivalent, • 3+ years Compression & Encapsulation experience, • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely to detail and accuracy with numbers., • Understands and is knowledgeable of cGMP, OSHA standards etc., • Mechanically inclined to understand inner workings of equipment., • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift, • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment., • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. 2nd shift - 3:00 pm to 11:30 pm

Job Description Position Overview: The position will work five days a week on-site in Somerset, NJ. The Pre-Production Operator is responsible for preparing, producing, and staging materials and work orders prior to production. Key Responsibilities: • Prepare and stage raw materials and components for upcoming production jobs, • Review work orders and job travelers for accuracy, • Verify material type, thickness, and quantities match job specifications, • Deliver and organize materials at designated workstations or pre-production areas, • Loading and unloading materials onto equipment as required, • Maintain organization and cleanliness of staging and work areas in accordance with 5S standards, • Communicate material shortages, discrepancies, or job readiness issues to supervisors, • Support production by ensuring jobs are prepared and available when scheduled, • Follow all company safety policies and operating procedures Other Important Responsibilities: Qualifications: • Previous manufacturing or production experience preferred, • Ability to follow work instructions and safety procedures, • Strong attention to detail and organizational skills, • Ability to work in a fast-paced production environment, • Basic computer or scanner experience is a plus Physical requirements and work environment: • Ability to stand and walk for extended periods throughout the work shift, • Ability to lift, push, pull, and move materials weighing up to 50 pounds, with or without assistance, • Perform repetitive motions including bending, reaching, twisting, and grasping, • Safely handle and move production materials and equipment, • Maintain focus and attention to detail while operating in a fast-paced manufacturing environment Work Environment: Work is performed in a manufacturing environment with exposure to industrial equipment, moving machinery, and moderate to high noise levels. Required use of Personal Protective Equipment (PPE) must be followed at all times. About CompoSecure CompoSecure, a GPGI business (NYSE: GPGI), is the leading manufacturer of Premium Metal Payment Cards and also offers best-in-class Authentication and Digital Asset solutions. The Company's offerings combine elegance, simplicity, and security to deliver exceptional experiences and peace of mind, enabling trust for millions of people around the globe. For more information, please visit and . We offer a comprehensive benefits package designed to support your health, financial well-being, and work-life balance, including medical, prescription, dental, and vision coverage; FSA/HSA options; company-paid life and disability insurance; 401(k) with company match; paid time off (PTO) and holidays; annual bonus opportunities; an employee assistance program (EAP); and opportunities for career growth and advancement. Additional details will be provided during the hiring process. CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans. Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to .

Job Description **An international plant-based manufacturing company is seeking a first-shift Production Assistant to support the production manager. ** * $19/hr. Plus full benefits * 1st shift Tuesday – Saturday 06:00 a.m. – 03:00 p.m. * Somerset, NJ Requirements of the Production Assistant: * Experience in working in a production environment, preferably in food manufacturing, but open to others * HS Degree or equivalent required * Physical strength and dexterity to lift, move, and handle equipment * Proficient in Microsoft Office Suites * Able to communicate, read, and understand in English * Knowledge of the applicable processes and related equipment Responsibilities of the Production Assistant: * Monitor production lines and GMP areas and report issues to the supervisor * Log line stops and losses via Teams * Contact Maintenance or QC as needed * Follow SOPs, SSOPs, and company policies * Flag noncompliance and unusual data in records * Support training for new line workers * Keep workspace clean and safe * Enter and manage production data * Ensure daily production goals are met Employment Type: Direct Hire Schedule: 1st shift Tuesday – Saturday 06:00 a.m. – 03:00 p.m. Friday and Saturday off Production assistant, machine operator, production You should be proficient in: • Standard Operating Procedures (SOPs), • Mixing, • Blending, • Weighing Raw Materials, • Packaging Machines, • Wrapping Machines, • Industrial Blender / Mixer

Job Description We are recruiting a TURRET TRUCK OPERATOR to join our team! Your position will focus on safe and efficient movement of products and materials. Key Responsibilities: • Operate turret trucks to pick, put away, and replenish inventory in high rack locations, • Safely maneuver equipment in narrow aisles and confined warehouse spaces, • Perform daily equipment inspections and report maintenance issues, • Accurately scan and track inventory using warehouse management systems (WMS), • Load and unload materials as required, • Maintain a clean and organized work area, • Follow all OSHA and company safety procedures, • High school diploma or equivalent preferred, • Valid forklift certification (turret truck experience required), • Minimum 1–2 years of warehouse or material handling experience, • Experience working in narrow aisle environments is a plus, • Strong attention to detail and accuracy, • Ability to work at heights, • Ability to follow instructions and safety guidelines, • Ability to lift up to 50 lbs, • Comfortable working at elevated heights, • Warehouse setting with moderate to high noise levels, • Must pass E-VERIFY, • Must pass a BACKGROUND CHECK, • Must be punctual, • A $500 bonus will be provided after completing 90 days with the company without any absences.

Job Description WHO WE ARE Playa Bowls is New Jerseys Original Acai Shop founded in 2014, and our mission is to serve the highest quality, innovative products to support healthier lifestyles and inspire a world of fun, excitement, and togetherness. At Playa Bowls, we live our brand in our actions and in the relationships that we make in our communities. Our focus is to provide a bowl full of deliciousness to every guest, delivered with authenticity and passion for the Playa way. What began as a pair of blenders, a patio table, and a fridge has flourished into a 200-unit operator and franchisor of the leading fast casual restaurant concept. WHAT WE OFFER • Tips: Our awesome staff + our awesome guest = a lot of tips!, • Development: Our Playa Bowls training program will allow you to grow your skills to use in any career!, • Fun Environment: We are always dancing, smiling & having lots of fun! As a Team Member, you’re a positive and enthusiastic people-person, who may just so happen to have a passion for fruit, superfoods, and all things healthy! You will be responsible for helping new customers pick a superfood for them and using your own personal skills to create them. If you enjoy fast-paced environments, career growth, entrepreneurial thinking, innovation, and an occasional silly food pun, we want you! WHAT YOU’LL DO • Maintaining cleanliness and organization throughout the restaurant, • Manage time effectively and meet all job responsibilities, • Maintain a positive work environment for guests and staff, • Check products to ensure consistency, palatability, and flavor conformity, • Perform food preparation or service tasks, • Use point of sale cash register system, • Addressing any questions or comments that customers may have, • Take customer orders and assemble the orders, • Replenish supplies and condiments and maintain inventory, • A Team Player, • Positive Attitude, • Flexible Schedule, • Must be able to remain in a stationary position for prolonged periods of time, • Must be able to lift or otherwise move 25-40 pounds occasionally, • Must be able to retrieve items from high and low shelving, the fridge/freezer, and under counters., • Must be able to tolerate occasionally loud environments (high powered blenders, timers, and order notifications)., • Ability to frequently move about inside the establishment to access the Point-of-Sale cash register, assemble guest orders, clear tables, restock inventory, etc. MISSION Inspire and support our communities one bowl at a time. VALUES Real Deal. Playa Passion. Powerhouse. Big Wave Chaser. Dawn Patrol “Playa Bowls is an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate on the basis of race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law.”

Job DescriptionSalary: $25-45 DOE Job Summary: We are seeking a reliable Demolition Equipment Operator to join our team. This role is responsible for operating heavy equipment such as excavators, skid steers, and loaders to safely perform demolition work on various job sites. The ideal candidate will work closely with crew members and supervisors to complete demolition tasks, maintain equipment, follow safety procedures, and help keep projects on schedule. Responsibilities: • Operate demolition equipment and heavy machinery such as excavators, skid steers, loaders, and other demolition attachments (grapples, breakers, shears, etc.) safely and efficiently, • Assist with planning and executing daily demolition activities with the crew, • Work closely with supervisors, crew members, and subcontractors to coordinate demolition tasks and site operations, • Coordinate equipment and materials required for assigned demolition work, • Assist with site preparation, structural teardown, debris handling, and loading of demolition materials, • Provide input for daily and weekly job reports as needed, • Follow project timelines and communicate with supervisors if delays or issues arise, • Maintain equipment and perform basic daily inspections before and after operation, • Follow all site safety procedures and help maintain and strengthen the companys safety culture Qualifications: • Ability to work effectively in a team environment, • Previous demolition or heavy equipment operating experience preferred, • Experience operating excavators, skid steers, or other demolition equipment preferred, • Ability to work on your feet for extended periods and lift/move materials when needed, • Must have a reliable pair of work boots and appropriate PPE, • OSHA 10 and/or OSHA 30 certification preferred Esposito Construction LLC is an Equal Opportunity-Affirmative Action Employer Minority / Female / Disability / Veteran / Gender Identity / Sexual Orientation / Age

Job DescriptionJob Title: Forklift Operator (Turret / Stand-Up / Sit-Down) Job Description This role operates turret, stand-up, and sit-down forklifts in a busy distribution warehouse, handling product movement in narrow aisle racking systems. You safely maneuver equipment in tight spaces, manage pallets at various heights, and use RF scanning and warehouse management tools to ensure accurate inventory control. You support shipping, receiving, picking, put-away, and stock replenishment activities while maintaining a clean, safe, and organized work area. Responsibilities • Operate turret forklifts to pick, move, and store products in narrow aisle racking systems., • Safely maneuver turret, stand-up, and sit-down forklifts in tight spaces while maintaining load stability., • Retrieve and place pallets at varying heights, including high-level racking locations., • Perform daily equipment inspections on forklifts and pallet jacks and promptly report any maintenance needs., • Follow all warehouse safety protocols and comply with OSHA standards and site procedures., • Accurately scan, label, and record inventory movements using RF scan guns and warehouse management systems (WMS)., • Assist with shipping and receiving activities, including loading and unloading, staging, and verifying product., • Support order picking, put-away, and stock replenishment to ensure timely and accurate order fulfillment., • Use electric pallet jacks and other warehouse equipment as needed to move and stage materials., • Participate in cycle counts and basic inventory control tasks to maintain accurate stock levels., • Collaborate with warehouse staff and supervisors to meet productivity and accuracy goals., • Maintain a clean, organized, and hazard-free work area in accordance with housekeeping standards.Essential Skills, • Proven ability to operate a turret truck safely and efficiently in narrow aisle racking systems., • Experience operating stand-up forklifts in a warehouse or distribution environment., • Experience operating sit-down forklifts for material handling and pallet movement., • Ability to use RF scan guns and RF scanners to scan, track, and verify inventory., • Hands-on experience with warehouse activities such as picking, put-away, shipping, and receiving., • Ability to operate an electric pallet jack safely for material movement and staging., • Capability to lift, move, and handle items weighing up to 50 lbs on a regular basis., • Strong awareness of warehouse safety practices and adherence to OSHA standards., • Attention to detail when scanning, labeling, and recording inventory movements., • Ability to work effectively as part of a warehouse team and follow directions from supervisors.Additional Skills & Qualifications, • Previous experience working in a large distribution or warehouse environment., • Familiarity with warehouse management systems (WMS) for tracking inventory and orders., • Comfort working at height when retrieving and placing pallets in high-level racking., • Strong organizational skills to maintain an orderly work area and manage multiple tasks., • Reliable attendance and punctuality to support consistent 2nd shift operations.Why Work Here? You join a high-volume distribution operation where your skills with turret and stand-up forklifts are valued and utilized every day. The environment offers steady work, clear processes, and the opportunity to build and refine your material handling expertise. You work alongside a supportive warehouse team focused on safety, productivity, and collaboration, with consistent scheduling that helps you plan your life around a stable 2nd shift role. Work Environment This position is based in a large distribution warehouse that operates on a 2nd shift schedule. You work primarily in narrow aisle racking areas using turret and stand-up forklifts, as well as sit-down forklifts and electric pallet jacks. The environment is fast-paced and production-driven, with regular interaction with shipping, receiving, and inventory teams. You will be on your feet and operating equipment for most of the shift, handling products and pallets that can weigh up to 50 lbs. The facility follows established safety procedures and OSHA standards, and you are expected to maintain a clean, organized, and safe work area throughout your shift. Job Type & Location This is a Contract to Hire position based out of Edison, NJ. Pay and Benefits The pay range for this position is $19.00 - $19.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Position Overview: The Senior Process Engineer – Manufacturing Operations will work five days a week on-site in Somerset, NJ. We are seeking an experienced and technically accomplished Senior Process Engineer to play a critical leadership role within our high volume, 24/7 manufacturing operations. This position is responsible for owning process performance, driving yield and efficiency improvements, and leading technical execution for new product introductions (NPI) in a fast-paced production environment. As a senior individual contributor, this role serves as a technical authority and mentor, partnering closely with Operations, Quality, Maintenance, Supply Chain and Engineering teams to ensure robust, scalable, and compliant manufacturing processes. The Senior Process Engineer is expected to apply deep engineering expertise, structured problem-solving methodologies, and data driven decision making to deliver measurable improvements in yield, quality, cost, and delivery. Key Responsibilities: • Provide advanced, real time process engineering support to production teams during the shift, ensuring rapid issue resolution and sustained equipment and process performance., • Serve as the technical owner for assigned process areas, leading root cause investigations related to yield loss, scrap, rework, downtime, and quality escapes using structured methodologies (SPC, FMEA, DMAIC, 5 Whys, Fishbone)., • Lead and execute yield improvement and continuous improvement initiatives, translating data insights into sustainable corrective and preventive actions that improve throughput, cost, and process capability., • Provide senior level engineering leadership for New Product Introduction (NPI) activities, including operator friendly process development, validation, work instruction authoring (SOP), training on SOP, and production ramp up readiness., • Collaborate cross functionally with Quality, Operations, Maintenance, Supply Chain, and Engineering to align process capability with business, customer, and regulatory requirements., • Develop, review, and maintain standard operating procedures (SOPs) and training materials, ensuring clarity, accuracy, and audit readiness., • Monitor, analyze, and report key performance indicators (KPIs) related to yield, cycle time, downtime, and quality; proactively drive action plans based on trends and risk., • Act as a technical mentor and coach to junior engineers, technicians, and manufacturing personnel, fostering a culture of continuous improvement and technical excellence., • Support customer visits, audits, and internal reviews as a process subject matter expert, representing manufacturing capabilities with professionalism and technical credibility., • Ensure ongoing compliance with safety, quality, and regulatory standards applicable to manufacturing operations, proactively identifying and mitigating process risk., • Demonstrate strong prioritization skills to ensure engineering effort is focused on the processes and issues with the highest business impact., • Maintain thorough documentation of existing and new processes, including equipment parameters, validation results, and continuous improvement outcomes., • Bachelor's degree in Manufacturing, Mechanical, Industrial, Chemical Engineering, or a related engineering discipline., • 5+ years of progressive experience in a high volume manufacturing environment, preferably supporting 24/7 operations., • Demonstrated expertise in process optimization, yield improvement, and advanced troubleshooting., • Proven experience leading or owning NPI process development and production readiness activities., • Strong working knowledge of Lean Manufacturing, Six Sigma, SPC, and statistical analysis techniques., • Proficiency with data analysis and manufacturing systems (Excel, Minitab, ERP)., • Excellent communication and collaboration skills, with the ability to influence across shifts and functions., • Experience in regulated manufacturing environments (e.g., medical device, electronics, automotive, aerospace) preferred., • Lean or Six Sigma certification (Green Belt or higher) strongly preferred., • Ability to lift up to 20 lbs., • Ability to perform sustained office work (sitting, typing, phone use, computer work) for 8+ hours per day., • Ability to support factory operations as needed, including standing at machinery, walking the shop floor, and operating equipment. We offer a comprehensive benefits package designed to support your health, financial well-being, and work-life balance, including medical, prescription, dental, and vision coverage; FSA/HSA options; company-paid life and disability insurance; 401(k) with company match; paid time off (PTO) and holidays; annual bonus opportunities; an employee assistance program (EAP); and opportunities for career growth and advancement. Additional details will be provided during the hiring process. CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans.

Overview: The Foods Warehouse position is physically demanding; manual labor is required. The Foods Support team is responsible for providing support to the Food Service department through ice production and delivery, beverage machine maintenance and novelty food storage and delivery. This position requires a valid drivers license and you must be 18 years of age or older. * Certain shifts begin as early as 6 am or go until 1 hour prior to park closing* Foods Support Associates are required to interact with guests, other Associates, leads, and supervisors on a daily basis. Additionally, Foods Support Associatess are required to continuously work outdoors and closely with others. Support staff will be required to work in the park when needed and must pass all Associates and cash handling trainings. Occasionally will work alone. Will always be exposed to direct sunlight, dust, dirt, and water. Must be able to function in all weather conditions for long periods of time. Foods Ice House/Support Host/Hostess must be willing to help in the park when needed. This may include but is not limited to, food safety, cash handling, interacting with guests, and providing excellent service. Pay Rate: $16.50/Hour Responsibilities: Must be able to promote the park with the utmost enthusiasm and pride while providing support to the Foods Department through ice production and delivery. Maintain the production of ice and delivery to food stands throughout the park. Delivery of ice via the use of park vehicles, hand trucks and manually. Bagging and lifting ice and operating lift equipment. Maintain a safe and clean work area. Maintain proper attendance and timelines. Required to attend work in full grooming guidelines. Required to stay in uniform w/ the exception of when in the support area. Ensure guest safety and satisfaction in their stay at Six Flags. Resolve Guest concerns that may arise on a daily basis. Ensure standards of performance for all areas within their responsibilities are met. Respond to any emergency situation in the area and maintain control until an area supervisor arrives. Ensure that image, cleanliness and courtesy standards requirements are met. Refrain from consuming any substance that may impair judgment. Cooperate with all Associatess and managers. Answer guest questions and give proper guidance. Complete any and all tasks as requested by Six Flags Management. Respond to emergencies with appropriate action, maintain control and notify supervisor. Qualifications: At least 18 years of age. Must posses a valid driver's license to drive park vehicles. Able to communicate effectively in the English language, including the ability to read, speak, and understand the English language. Available to work flexible hours at nights, weekends and holidays. Must have good customer service skills. Requires continuous sitting or standing, bending, eye/hand coordination, near vision, hearing, and speech. Requires frequent kneeling, manual dexterity, gross motor skills, and color definition. Requires using a telephone. Must be able to read and write English. Requires some lifting, sitting, standing, walking, bending, eye/hand coordination, near vision, hearing, and speech. Requires frequent kneeling, manual dexterity, gross motor skills, and color definition. Requires using telephone. Must be able to read and write English. Must be able to stand/walk for up to 6 hours at a time and as many as 14 hours a day. Must be able to walk up to 3 miles per day over various surfaces. Must be able to lift 50 lbs consistently. Must be able to lift and carry 50 lbs over 25 feet over various surfaces. Must be able to lift and lower 50 lbs above shoulder level. Must be able to climb a stepladder up to 6 ft. in height. Note: This job description is not intended to be all inclusive. Associates may perform other related duties as required, meeting the on-going needs of the company. Six Flags Entertainment Corporation is North America’s largest regional amusement-resort operator with 27 amusement parks, 15 water parks and nine resort properties across 17 states in the U.S., Canada and Mexico. Focused on its purpose of making people happy, Six Flags provides fun, immersive and memorable experiences to millions of guests every year with world-class coasters, themed rides, thrilling water parks, resorts and a portfolio of beloved intellectual property such as Looney Tunes®, DC Comics® and PEANUTS®. What's in it for you?

Job Summary: We are looking for an experienced Forklift Operator to work with our client in the energy systems industry.

We are recruiting a Heavy Forklift Operator - Temp To Hire to join our team! Your position will focus on safe and efficient movement of products and materials. Familiarity with pallet jack, forklift, or other industrial vehicles.

Job DescriptionDescription: Spot Weld Operator Falcon Manufacturing is a custom fabrication facility for sheet metal, tubing, and wire components. Falcon provides economical manufacturing to large volume clients through our highly trained staff, advanced manufacturing technology, on-time delivery, and competitive pricing. Falcon is looking to add a Spot Weld Operator to our Team. Responsibilities: • Operate and maintain equipment., • Ability to work independently., • Ability to run repetitive production parts., • Reports to Department Manager., • May perform other related duties or work at a different workstation as production needs require. Requirements: · Minimum 1 year experience in manufacturing · Minimum 1 year experience in spot welding · High School Diploma or Equivalent · Ability to read engineering drawings and weld symbols. · Ability to read blueprints and measure parts. · Ability to meet productivity standards, completing work in timely manner · Ability to work independently and in a team environment · Ability to thrive in an evolving, fast-paced, deadline-driven environment · Ability to lift, push, or pull up to 25 lbs., occasionally up to 50 lbs. and more · Dependable · Detail oriented · Energetic and eager to learn Bonus Points: · Experience in metal shop production · Basic Microsoft Office (Word, Outlook) Location: Somerset, NJ Job Type: Full-time, 1st shift Monday to Friday, from 6:00am to 2:30pm Overtime as needed Benefits · Medical/Dental/Vision Insurance · Company Paid Basic Life and AD&D Insurance · Voluntary Benefits (Supplemental Life Insurance, LegalShield, and more) · Company Paid Long-term Disability · 401K with Company Match · Paid Vacation and Sick Time · 9 Paid Holidays Pay: hourly from $17.50-$20 DOE

Job Description Job Description Date 4/2023 Location 1300 Airport Road, North Brunswick NJ Title Associate, Manufacturing Department Standard Manufacturing Reports to Production, Supervisor FLSA (Exempt or Non-Exempt Non-Exempt Role Overview The Manufacturing Associate is responsible for the operation and set up of one (1) machine under the guidance of a seasoned operator. The position includes assisting with the setup, operation, cleaning, moving supplies and finish products and preventative maintenance of all related equipment. The Associate is accountable for overall performance including safety, quality, shrink, attainment, and production efficiency. Areas of Responsibility • Ensure full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed to ensure product specifications and tolerances are met in compliance with company standards and regulatory requirements., • Ensure that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing., • Complete all labeling and inventory movements to ensure accurate inventory control., • Dismantle and clean any accessories and equipment while also maintaining a clean work area., • Perform all material handling of products and components., • Correct document errors as needed on batch record., • Maintain proper gowning and hygiene to ensure integrity of the product as per company policies., • Work extended hours and occasional weekend overtime., • Works in a safe and responsible manner to create an injury-free and incident-free workplace., • Complies with all job-related safety and other training requirements. Education & Qualification: • High school graduate or GED equivalent., • No prior experience required., • Operates one (1) machine under guidance of a seasoned operator. Certifications, Licenses, Credentials: • Able to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Mechanically inclined to understand inner workings of equipment., • Able to lift up to 50 lbs.; occasionally lift and move up to 75 lbs., • Stand and walk on the production floor for a minimum of 6 hours per shift., • Use hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment., • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. 1st shift - 7:00 am to 3:30 pm

Job DescriptionCompany Description Cornerstone Building Brands is a leading manufacturer of exterior building products for residential and low-rise non-residential buildings in North America. Headquartered in Cary, N.C., we serve residential and commercial customers across the new construction and Repair & Remodel (R&R) markets. Our market-leading portfolio of products spans vinyl windows, vinyl siding, stone veneer, metal roofing, metal wall systems and metal accessories. Cornerstone Building Brands’ broad, multi-channel distribution platform and expansive national footprint includes more than 18,800 team members at manufacturing, distribution and office locations throughout North America. Corporate stewardship and Environmental, Social and Governance (ESG) responsibility are embedded in our culture. We are committed to contributing positively to the communities where we live, work and play. For more information, visit us at . Job Description Job Description Production Associate 4 (PIT Operator) JOB DETAILS Base Pay: $20.00 per hour 2nd Shift: 6:45 am - 3:15 pm DUTIES AND RESPONSIBILITIES The forklift position, is responsible for safely and efficiently, locating, transporting, and loading building materials into our fleeted trailers. Successful candidates enjoy working in a fast-paced, physically demanding, and repetitive work environment, which includes heavy lifting or working with your hands. • · Participate in Safety walks and all stand-up meetings, • Investigate last known scan locations in WINTRAK of windows and doors throughout the shipping dock, • Safely unload and load windows and patio doors onto shipping carts, • Locate and retrieve custom windows and doors, located on holding carts throughout the shipping dock, • Safely and efficiently floor load custom and stock windows and patio doors onto trailers, by manifested stops, • Place all screen, panel and frame kit labels on respective units before scanning and loading, • Scan all stock/ custom windows, PD doors, screens, panels, frames, sash/ glass only units to trailer locations, • Safe movement of carts in and out of loading dock work area, • Investigate and record stock pallet locations onto SD pallet forms and submit to forklift operator for retrieval, • Properly strap all loaded windows and Patio doors with efficient amount of straps & cardboard, and in accordance with SOP’s, • Clean and sweep trailer before loading any merchandise, • Adhere to 5S guidelines while at workstation and during operations, • Ensure dock lock is engaged while loading trailers, and disengaged upon completion of loaded trailer, • Safely and efficiently operate sit down forkliftQualifications, • Must be able to lift up to 50 pounds regularly and stand for duration of entire shift., • Must cross-train and rotate on various workstations within line/complex., • Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals, • Able to convert fractions to decimals, • Ability to read, write in English language and interpret common statistical data, productivity reports, and written instructions, • Capable of using computerized equipment, • Ability to move carts in and out of production areas, • 1 - 3 years of experience working in a manufacturing environment preferred, • 1 - 3 years of experience working on electric or gas powered forklift (Must have been previously certifited) Additional Information All your information will be kept confidential according to EEO guidelines. Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. Cornerstone Building Brands is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, or status as a protected veteran. You can find the Equal Employment Opportunity Poster here. You can also view Your Right to Work Poster here along with This Organizations Participation in E-Verify Poster here. If you'd like to view a copy of the company's affirmative action plan for protected veterans or individuals with disabilities or policy statement, please contact Human Resources at 281-897-7788 or . If you have a disability and you believe that you need a reasonable accommodation in order to search for a job opening or to submit an online application, please contact Human Resources at 281-897-7788 or . This email is used exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only emails received for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. All your information will be kept confidential according to EEO guidelines. California Consumer Privacy Act (CCPA) of 2018 Must be at least 18 years of age to apply. Note to External Recruiters Cornerstone Building Brands does not accept unsolicited resumes and will not pay fees for any candidate submissions that were not expressly authorized. Notice of Recruitment Fraud We have been made aware of multiple scams whereby unauthorized individuals are using Cornerstone Building Brand's name and logo to solicit potential job-seekers for employment. In some cases, job-seekers are being contacted directly, both by phone and e-mail. In other instances, these unauthorized individuals are placing advertisements for fake positions with both legitimate websites and fabricated ones. These individuals are typically promising high-paying jobs with the requirement that the job-seeker send money to pay for things such as visa applications or processing fees. Please be advised that Cornerstone Building Brands will never ask potential job-seekers for any sort of advance payment or bank account information as part of the recruiting or hiring process.

Job DescriptionCompany Description Cornerstone Building Brands is a leading manufacturer of exterior building products for residential and low-rise non-residential buildings in North America. Headquartered in Cary, N.C., we serve residential and commercial customers across the new construction and Repair & Remodel (R&R) markets. Our market-leading portfolio of products spans vinyl windows, vinyl siding, stone veneer, metal roofing, metal wall systems and metal accessories. Cornerstone Building Brands’ broad, multi-channel distribution platform and expansive national footprint includes more than 18,800 team members at manufacturing, distribution and office locations throughout North America. Corporate stewardship and Environmental, Social and Governance (ESG) responsibility are embedded in our culture. We are committed to contributing positively to the communities where we live, work and play. For more information, visit us at . Job Description Production Associate 3 JOB DETAILS Base Pay: $18.25 per hour 2nd Shift: 3:45 pm - 12:15 am The Glass Optimizer is responsible for the cutting and organizing of glass to be processed into insulated glass units. Successful candidates enjoy working in a fast-paced, physically demanding, and repetitive work environment, which includes heavy lifting or working with your hands. DUTIES AND RESPONSIBILITIES • Select proper glass batch on Optimizer Table computer, • Consistently hold cycle time, • Assist in movement of carts in and out of production work area, • Communicate quality issues or mechanical issues observed, • Complete quality checks, • Constantly observe quality of IG units, • Break scored glass and place into corresponding slots on glass cart, • Drop needed glass sheets on table without autopickersQualifications, • Must be able to lift up to 50 pounds occasionally and stand for duration of entire shift, • Ability to move large sheets of glass., • Ability to measure with 1/32”, • Ability to use computerized equipment, • Ability to read and write to complete quality checklists, verify paperwork, read machine settings and cart locations, • Ability to work in tandem with another operator, • Ability to locate minor quality defects in glass, • Must cross-train and rotate on various workstations within line/complex., • Ability to comprehend written work instructions, standard work and quality documents, • Ability to move carts of glass in and out of production areas, • 1 - 3 years of experience working in a manufacturing environment preferred Additional Information Site Location: 1 Silverline Dr. North Brunswick Township, NJ 08902 For more information please text CBB to ‪‪(732) 314-3003. Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. You can also join one of our Employee Resource Groups which help support our commitment to providing a diverse and inclusive work environment. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. All your information will be kept confidential according to EEO guidelines. Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. Cornerstone Building Brands is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, or status as a protected veteran. You can find the Equal Employment Opportunity Poster here. You can also view Your Right to Work Poster here along with This Organizations Participation in E-Verify Poster here. If you'd like to view a copy of the company's affirmative action plan for protected veterans or individuals with disabilities or policy statement, please contact Human Resources at 281-897-7788 or . If you have a disability and you believe that you need a reasonable accommodation in order to search for a job opening or to submit an online application, please contact Human Resources at 281-897-7788 or . This email is used exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only emails received for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. All your information will be kept confidential according to EEO guidelines. California Consumer Privacy Act (CCPA) of 2018 Must be at least 18 years of age to apply. Note to External Recruiters Cornerstone Building Brands does not accept unsolicited resumes and will not pay fees for any candidate submissions that were not expressly authorized. Notice of Recruitment Fraud We have been made aware of multiple scams whereby unauthorized individuals are using Cornerstone Building Brand's name and logo to solicit potential job-seekers for employment. In some cases, job-seekers are being contacted directly, both by phone and e-mail. In other instances, these unauthorized individuals are placing advertisements for fake positions with both legitimate websites and fabricated ones. These individuals are typically promising high-paying jobs with the requirement that the job-seeker send money to pay for things such as visa applications or processing fees. Please be advised that Cornerstone Building Brands will never ask potential job-seekers for any sort of advance payment or bank account information as part of the recruiting or hiring process.

Job DescriptionCompany Description Cornerstone Building Brands is a leading manufacturer of exterior building products for residential and low-rise non-residential buildings in North America. Headquartered in Cary, N.C., we serve residential and commercial customers across the new construction and Repair & Remodel (R&R) markets. Our market-leading portfolio of products spans vinyl windows, vinyl siding, stone veneer, metal roofing, metal wall systems and metal accessories. Cornerstone Building Brands’ broad, multi-channel distribution platform and expansive national footprint includes more than 18,800 team members at manufacturing, distribution and office locations throughout North America. Corporate stewardship and Environmental, Social and Governance (ESG) responsibility are embedded in our culture. We are committed to contributing positively to the communities where we live, work and play. For more information, visit us at . Job Description Production Associate 3 JOB DETAILS Base Pay: $18.25 per hour 1st Shift: 6:45 am - 3:15 pm The Glass Optimizer is responsible for the cutting and organizing of glass to be processed into insulated glass units. Successful candidates enjoy working in a fast-paced, physically demanding, and repetitive work environment, which includes heavy lifting or working with your hands. DUTIES AND RESPONSIBILITIES • Select proper glass batch on Optimizer Table computer, • Consistently hold cycle time, • Assist in movement of carts in and out of production work area, • Communicate quality issues or mechanical issues observed, • Complete quality checks, • Constantly observe quality of IG units, • Break scored glass and place into corresponding slots on glass cart, • Drop needed glass sheets on table without autopickersQualifications, • Must be able to lift up to 50 pounds occasionally and stand for duration of entire shift, • Ability to move large sheets of glass., • Ability to measure with 1/32”, • Ability to use computerized equipment, • Ability to read and write to complete quality checklists, verify paperwork, read machine settings and cart locations, • Ability to work in tandem with another operator, • Ability to locate minor quality defects in glass, • Must cross-train and rotate on various workstations within line/complex., • Ability to comprehend written work instructions, standard work and quality documents, • Ability to move carts of glass in and out of production areas, • 1 - 3 years of experience working in a manufacturing environment preferred Additional Information Site Location: 1 Silverline Dr. North Brunswick Township, NJ 08902 For more information please text CBB to ‪‪(732) 314-3003. All your information will be kept confidential according to EEO guidelines. Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. Cornerstone Building Brands is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, or status as a protected veteran. You can find the Equal Employment Opportunity Poster here. You can also view Your Right to Work Poster here along with This Organizations Participation in E-Verify Poster here. If you'd like to view a copy of the company's affirmative action plan for protected veterans or individuals with disabilities or policy statement, please contact Human Resources at 281-897-7788 or . If you have a disability and you believe that you need a reasonable accommodation in order to search for a job opening or to submit an online application, please contact Human Resources at 281-897-7788 or . This email is used exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only emails received for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. All your information will be kept confidential according to EEO guidelines. California Consumer Privacy Act (CCPA) of 2018 Must be at least 18 years of age to apply. Note to External Recruiters Cornerstone Building Brands does not accept unsolicited resumes and will not pay fees for any candidate submissions that were not expressly authorized. Notice of Recruitment Fraud We have been made aware of multiple scams whereby unauthorized individuals are using Cornerstone Building Brand's name and logo to solicit potential job-seekers for employment. In some cases, job-seekers are being contacted directly, both by phone and e-mail. In other instances, these unauthorized individuals are placing advertisements for fake positions with both legitimate websites and fabricated ones. These individuals are typically promising high-paying jobs with the requirement that the job-seeker send money to pay for things such as visa applications or processing fees. Please be advised that Cornerstone Building Brands will never ask potential job-seekers for any sort of advance payment or bank account information as part of the recruiting or hiring process.

Job Description Job Title: Repair Table Operator/ Titulo profesional: Operador de Mesa de Reparación Division: General Labor / Division: Trabajo General Department: Operations / Departamento: Operaciones Reports To: Shift Supervisor / Reportar a: Supervisor de Turno Summary: Repairs pallets using quality specifications by performing the following duties. Resumen: Reparar las paletas utilizando las especificaciones de calidad mediante la realización de las siguientes funciones: Duties and Responsibilities include the following. Other duties may be assigned. Funciones y Responsabilidades incluyen lo siguiente. Otras funciones pueden ser asignadas. 1. Operates repair equipment per standard operating procedures.* Operar equipo de reparación de acuerdo con los procedimientos operativos estandar.* 2. Meets production quotas within a reasonable training/retraining time period.* Cumplir con las cuotas de producción dentro de un entrenamiento razonable/ periodo de tiempo para re-entrenamiento.* 3. Ensures housekeeping of equipment and surrounding area is acceptable per standard operating procedure.* Asegurar la limpieza de los equipos y el área de los alrededores es aceptable por procedimiento operativo estándar.* 4. Follows safety standard operating procedures and maintain proper use of all personal protective equipment at all time of operation.* Seguir los procedimientos operativos de seguridad estándar y mantener el uso correcto de todos los equipos personales de protección en todo momento de la operación.* 5. Generates accurate production reporting for supervisor.* Generar informes de producción precisos para el supervisor.* 6. Maintains possession and good condition of assigned tools and nails.* Mantener posesión y la buena condición de herramientas y clavos asignados.* 7. Alerts supervisor of potential maintenance and/or safety concerns.* Alertar al supervisor de problemas potenciales de mantenimiento y/o de seguridad.* 8. Receives and follows designated job processes and safety trainings.* Recibir y seguir procesos designados de trabajo y entrenamiento de seguridad.* 9. Performs assigned preventive maintenance of equipment.* Llevar a cabo el mantenimiento preventivo de los equipos asignados.* 10. Performs other related duties as assigned. Realizar otras tareas afines que le sean asignadas.* Qualifications: / Cualificaciones To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Para realizar este trabajo con éxito, un individuo debe ser capaz de realizar cada función esencial satisfactoriamente. Los requisitos enumerados a continuación son representativos de los conocimientos, destrezas y/o la habilidad necesaria. Adaptaciones razonables se pueden hacer para permitir a las personas con discapacidad llevar a cabo las funciones esenciales. Language Ability: / Habilidad de Lenguaje: Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Habilidad para leer y comprender instrucciones simples, correspondencia corta, y notas. Habilidad para escribir correspondencia simple. Habilidad para presentar con eficacia la información en uno – a – uno y grupos pequeños de situaciones para los clientes, clientes y otros empleados de la organización. Math Ability: /Habilidad de las Matemáticas: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Habilidad para sumar, restar, multiplicar, y dividir en todas las unidades de medida, usando números enteros, fracciones comunes, y decimales. Habilidad para calcular tarifas, relación, y el porcentaje y dibujar e interpretar graficas de barras. Reasoning Ability: / Habilidad de Razonamiento: Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. Habilidad para aplicar sentido común y el entendimiento para llevar a cabo detallado pero no involucrado instrucciones escritas u oral. Habilidad para bregar con problemas envolviendo algunas variables concretas y situaciones estandarizadas. Education/Experience: / Educacion/ Experiencia: High school diploma or general education degree (GED); or equivalent combination of education and experience. Diploma de Escuela Secundaria o un grado en educación general (GED); o una combinación equivalente de educación y experiencia. Equipment: / Equipo: • Hammer / Martillo, • Nail gun / Pistola de clavos, • Sawzall / Sawzall, • Screw gun / Pistola de tornillos Physical Demands: / Demandas Físicas: *Essential Function © 2016 Millwood, Inc. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, use hands, and reach with hands and arms. The employee is frequently required to walk and talk or hear. The employee is occasionally required to stoop, kneel, crouch or crawl. The employee must regularly lift and/or move up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, and ability to see color. Las demandas físicas descritas aquí son representativas de las que se deben cumplir por un empleado para realizar con éxito las funciones esenciales de este trabajo. Adaptaciones razonables se pueden hacer para permitir a las personas con discapacidad realizar las funciones esenciales. Mientras desempeñan los deberes del trabajo, se requiere regularmente del empleado pararse, usar las manos y alcanzar con los brazos y manos. Con frecuencia se requiere del empleado caminar, y hablar o escuchar. Se requiere del empleado ocasionalmente agacharse, arrodillarse, agacharse o arrastrarse. El empleado debe levantar regularmente y/ o mover hasta 75 libras. Habilidades específicas de visión requeridas para este trabajo incluye visión cerca, la visión de lejos, visión periférica, y la habilidad para ver el color. Work Environment: / Ambiente de Trabajo: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to work near moving mechanical parts. The employee is frequently exposed to fumes or airborne particles. The employee is occasionally exposed to wet or humid conditions (non-weather), outdoor weather conditions, extreme cold (non-weather), and extreme heat (non-weather). Las características del ambiente de trabajo que se describen aquí son representativas de las que un empleado encuentra en el desempeño de las funciones esenciales de este trabajo. Adaptaciones razonables se pueden hacer para permitir a las personas con discapacidad realizar las funciones esenciales. Mientras desempeñan los deberes del trabajo, el empleado es expuesto regularmente a trabajar cerca de partes mecánicas en movimiento. El empleado es expuesto frecuentemente a gases o partículas en el aire. El empleado es ocasionalmente expuesto a condiciones húmedas o mojadas (no el clima), condiciones climáticas externas, extremadamente frio (no el clima), y el calor extremo (no el clima). The noise level in the work environment is usually loud. El nivel de ruido en el ambiente del trabajo es usualmente alto.

Mauser Packaging Solutions - - Responsibilities: Loads products as requested on/off truck trailers; Stores finished goods in designated spaces in the warehouse or manufacturing area; Maintains efficient use of time; Follows safe work procedures for forklift operators; Observes safe work practices.

Shift Differential Work Schedule: Monday-Friday 3:30am to 12:00am Additional Benefits: Paid Time Off Medical Insurance Dental Insurance Vision Insurance Life Insurance 401K Associate Referral Program Our associates also enjoy numerous associate discounts and opportunities to grow with the organizati

Home Depot - - Responsibilities: Load and unload trucks within the facility; Move material within the facility using hand trucks, forklifts, or other equipment; Sort, staging, and transport products as required; Operate forklifts or other machinery to complete tasks; Assist with general warehouse d

Responsibilities: Move, load, unload, and move furniture and inventory of various sizes safely; Use scanners and handheld devices to track inventory and locations; Perform quality control tasks including inspecting, repackaging, labeling, and sorting products; Operate material handling equipment whe