Trabajos mechanical engineering technology en Hicksville, New YorkCrear alertas

Job Description The Building People, LLC, has a position open for a full-time HVAC/R Technician for the facilities engineering program to support a federal Agency. The HVAC Technician will have a strong focus on operating, maintaining, troubleshooting and repairing facility equipment on all systems. Individuals are expected to demonstrate technical expertise in HVAC trade and be multi-skilled in others (Electrical, Piping/Plumbing, Central Utility Plant Operations) in order to successfully complete daily/weekly work assignments. Responsibilities will include, but not be limited to: • Perform maintenance, monitoring repairs to the Mechanical, Plumbing, Structural, Furniture, Fire, Life Safety, and Control systems for the facility to keep facility and building systems up to applicable standards as assigned, • Maintains responsibility for facility services, corrective maintenance, inventory control, general maintenance and technical proficiency., • Maintenance of the equipment will include cleaning, inspecting, calibrating and changing parts to maintain the HVAC systems and associated equipment at optimum performance levels, • Maintain heating equipment, chillers (air and/ or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc., • Knowledge of the tools, materials, and test equipment used in the installation,, • Maintenance and repair of air conditioning/refrigeration HVAC control systems., • Install, maintain, and repair HVAC controls, including DDC, pneumatic, electric, and electronic controls., • Troubleshoots and repairs HVAC/BAS control problems, including dampers, coils, HVAC steam related controls, air handling equipment, and all types of valves., • Adjusts and calibrates pneumatic/electronic devices to balance all HVAC systems., • Inspects and services controls on a scheduled basis., • Responds to service calls and troubleshoots problems., • Prepares estimates for the repair and/or installation of new Mechanical, Electrical and Plumping systems and makes recommendations for such repairs and services., • Troubleshoots and tests controls using test gauges, amp meters, hydro thermographs, and computers., • Repair equipment and perform corrective maintenance in assigned programmatic area(s)., • Inspect and test equipment / systems to ensure that technical integrity is maintained and if necessary, proposes appropriate corrective action., • Review pertinent technical manuals to remain current with technology and electrical safety codes., • Work indoors & outdoors in the installation and maintenance of a wide - array of technical equipment; use of ladders, safety equipment and ability to navigate rooftops and tight spaces may be required, • Applies technical knowledge to perform simple or routine tasks following detailed instructions., • Receives technical guidance, as required, from supervisor or higher-level technician., • Five (5) years of commercial HVAC/R journeyman level experience., • Communication skills required to interface and coordinate with other technicians., • Must hold EPA Universal level certification per Section 608 of the Clean Air Act., • Must hold NATE, HVAC Excellence Professional/Industry, or UA Star Mastery certification., • Experience setting up and managing BAS schedules, set points, and alarms., • Experience with general RCM practices and procedures., • Capable of performing physical labor including, walking, standing, lift up to 40lbs, pulling, climbing up and down ladders and agility/dexterity to perform duties assigned., • Must be able to successfully pass a government background investigation Preferred Experience & Skills • Familiarity with Niagara, • Skills in Maximo or CMMS Required Education • High School Diploma of GED Equivalent

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology products, including mission systems, radio frequency ("RF") components, RF microwave/microelectronic assemblies, and technologically advanced printed circuit boards ("PCB"s). TTM stands for time-to-market, representing how TTM's time-critical, one-stop design, engineering and manufacturing services enable customers to reduce the time required to develop new products and bring them to market. Additional information can be found at Summary: To perform assigned assembly operations using all applicable occupational skills, with an absolute minimum of supervision and with an extremely high degree of competence. Essential Duties & Responsibilities: \n • Performs complex and intricate wiring and assembly operations to production standards.\n, • Records, maintains and researches/retrieves data via paper or computer, as applicable.\n, • Moves assigned electro-mechanical hardware through production to its next corresponding operation when required.\n, • Works from complicated drawings, operation sheets, assembly procedures, material specifications and processes, sketches, verbal instructions, etc.\n, • Capable of conducting continuity checks.\n, • Capable of being certified for all assigned tasks within the scope of this job description and the applicable occupational skills.\n, • Satisfactorily demonstrates the ability to fulfill the required technical qualifications of the job by taking an applicable practical demonstration.\n, • Minimum of 1-4 years directly related experience, or IPC Certification\n, • High school diploma or equivalent\n, • Rarely lifting over 25 lbs. of weight\n #LI-MP1 Compensation and Benefits: TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401k, flexible spending and health savings accounts, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available on the 1st of the month following date of hire. For some positions, only PTO and holiday benefits are offered. Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is: $39,099 - $58,649 Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

Location US-NY-Melville Company Canon U.S.A., Inc. Requisition ID 34082 Category Engineering Position Type Full-Time Workstyle Hybrid Canon USA in Melville, NY is currently seeking a Salesforce Development Engineer (Engineer, Software Development). The Salesforce Development Engineer supports the design, development, and day-to-day stability of Salesforce across direct and indirect sales channels. This role works closely with the Senior Salesforce Engineer, Sales Technology, and IT teams to deliver enhancements, support consolidation efforts, and maintain reliable Salesforce operations. This is a hands-on role focused on Salesforce development, production support, and contributing to ongoing platform improvements. This position is full time and offers a hybrid work schedule requiring you to be in the office Monday, Tuesday and Wednesday and an option to work from home the remainder of the week (unless a specific business need arises requiring in office attendance on other days). Note that work schedules and office reporting requirements may change from time to time based on business needs. - Design, develop, test, and deploy Salesforce solutions using Apex, Lightning Web Components (LWC), Salesforce Flow, and declarative tools • Support Salesforce functionality for direct and indirect sales channels, including partner and reseller use cases, • Assist with Salesforce org consolidation and modernization efforts, including data validation, migrations, and cleanup of legacy functionality, • Provide production support and break/fix, troubleshooting Apex, Flows, permissions, integrations, and performance issues, • Build and support basic Salesforce integrations, including REST/SOAP APIs and Apex REST services, • Support IT-led initiatives requiring Salesforce development, reporting, or data analysis, • Participate in testing, deployments, and post-release validation, • Write clean, maintainable code and participate in code reviews, • Follow Salesforce security and data governance standards, • Stay current with Salesforce releases and best practices; suggest incremental improvements, • Timely delivery of Salesforce enhancements and fixes, • Reduced production issues and improved incident response times, • Effective contribution to consolidation and modernization initiatives, • Strong collaboration with Senior Engineers, IT, and Sales Technology partners, • Improved Salesforce reliability and maintainability - Bachelor's degree in an engineering discipline required, plus 3 - 5 years of related experience, or a Master's degree in the field. *A note on degree requirements for this title: the term "engineering discipline" refers primarily to a degree in Mechanical, Software or Electrical Engineering, with additional consideration given to candidates who have degrees in Mathematics, Applied Mathematics, Applied Physics, Biology or Chemistry if they have attended recognized engineering schools or otherwise demonstrate sufficient knowledge of engineering skills, • 3-5+ years of hands-on Salesforce development or solutions engineering experience, • Practical experience with:, • Apex, • Salesforce Flow, • Lightning Web Components (LWC), • Working knowledge of Salesforce data models, security, and governor limits, • Experience supporting Salesforce in a production environment, • Strong troubleshooting and analytical skills, • Ability to balance support work and project delivery, • Salesforce certifications (one or more preferred):, • Platform Developer I, • Salesforce Administrator, • App Builder, • Experience with:, • Direct and indirect sales channel models, • Salesforce integrations and APIs, • Org consolidation, data migrations, or platform clean-up, • Familiarity with:, • Salesforce DevOps tools or CI/CD (e.g., Copado, Gearset, Git-based workflows), • Agile delivery and cross-functional collaboration, • Exposure to Experience Cloud, Omni-Channel, Email-to-Case, or Salesforce AI features (Einstein / Agentforce) is a plus, not required We are providing the anticipated salary range for this role: $92,210 - $138,080 annually About our Company - Canon U.S.A., Inc., is a leading provider of consumer, business-to-business, and industrial digital imaging solutions to the United States and to Latin America and the Caribbean markets. With approximately $28.5 billion in global revenue, its parent company, Canon Inc., as of 2024 has ranked in the top-10 for U.S. patents granted for 41 consecutive years*. Canon U.S.A. is dedicated to its Kyosei philosophy of social and environmental responsibility. To learn more about Canon, visit us at and connect with us on LinkedIn at . Who We Are Where Talent Fosters Innovation. Do you want your next professional experience to be filled with purpose and opportunity, world-class team members, and impactful work? Driven by our mission of exceeding customer expectations with our technologies and enriching the lives of our local communities and staff, we are a phenomenal team working collaboratively toward common goals. Our employees have a strong work ethic, creativity, and a cooperative spirit. We believe in integrity, respect, empowerment, and making a difference in the communities we serve. There is a strong sense of pride in what we do individually and together as a team. Join us and discover what it means to work for a global digital imaging leader with an unparalleled reputation for quality and innovation. What We Offer You'll be joining a leader in digital imaging and innovation with an immense opportunity to make an impact and create your own rewarding career. We demonstrate commitment to our employees by offering a full range of rewards, including competitive compensation and benefits. And Even More Perks! -Employee referral bonus -Employee discounts -"Dress for Your Day" attire program (casual is welcome, based on your job function) -Volunteer opportunities to give back to our local community -Swag! A Canon welcome kit and official merch you can't get anywhere else *Based on weekly patent counts issued by United States Patent and Trademark Office. All referenced product names, and other marks, are trademarks of their respective owners. Canon U.S.A., Inc. offers a competitive compensation package including medical, dental, vision, 401(k) Savings Plan, discretionary profit sharing, discretionary success sharing, educational assistance, recognition programs, vacation, and much more. A more comprehensive list of what we have to offer is available at We comply with all applicable federal, state and local laws, regulations, orders and mandates, including those we may be required to follow as a federal government contractor/subcontractor. You must be legally authorized to work in the United States. The Company will not pursue or support visa sponsorship. All applicants must reside in the United States at the time of hire. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you are not reviewing this job posting on our Careers' site , we cannot guarantee the validity of this posting. For a list of our current postings, please visit us at . #CUSA Hybrid - This position is full time and offers a hybrid work schedule requiring you to be in the office three days a week and an option to work from home the remainder of the week (unless a specific business need arises requiring in office attendance on other days). Note that work schedules and office reporting requirements may change from time to time based on business needs. #PM19 #LI-AV1 #LI-HYBRID #ID22 We can recommend jobs specifically for you! Click here to get started.

Profile A bachelor's degree in mechanical engineering, mechanical engineering technology, or a comparable technical field. The position requires hands‑on engineering work, cross‑department collaboration, and strong mechanical design skills using tools like AutoCAD, Inventor, or SolidWorks. This

Position Summary: Responsible for core assembly of heat exchangers within the production environment. Supervisory Responsibilities: • None Duties and Responsibilities: • Assembly of cores for heat exchangers, • Operate equipment and tools to stretch, compress, size and cut FIN material, • Conduct general deburring of parts to meet quality standards, • Utilize basic hand tools and general mechanical tools effectively Required Skills and Abilities: • Demonstrate mechanical aptitude, • Must be able to read and interpret engineering blueprints., • Strong adherence to safety protocols and operational directions communicated in English, • Ability to work overtime based on the business needs which may include weekends. Education and Experience: • High School diploma, Trade School Diploma, or GED required, • Manufacturing/Production background preferred, not required., • Ability to read, write, and converse in English. Physical Requirements: • Ability to lift up to 50 lbs. with or without accommodations., • Ability to walk, stand, stoop, and bend 80% of the time during a shift, • Ability to work in a production environment with constant standing and movement Compensation Employee Type: Hourly Salary Minimum: $35,000 Salary Maximum: $40,000 Incentive: No Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location. For more information on AMETEK's competitive benefits, please click here. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.5 billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers' most complex challenges. We employ 22,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK is a component of the S&P 500. Visit for more information. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call 1 (866) 263-8359. Nearest Major Market: Long Island Nearest Secondary Market: New York City

Job Overview The Manufacturing Engineer must have the ability to analyze problems and processes and offer solutions or work with senior engineers to implement solutions. Experience working with electronics, computers, automotive or robotics or similar technology field required. Compensation will be based on experience and qualifications and will be discussed during the interview process. The salary range for this role is $105,000 - $120,000 annually and offers a competitive benefits package. #LI-KR1 A Day In The Life Every day at Hubbell is different and you'll contribute in many ways. On any given day, you'll make a difference by: \n • Assists in planning and designing processes for an electronics manufacturing facility .\n, • Maximizes efficiency by analyzing layout of equipment, workflow, assembly methods, and work force utilization in an electronic environment.\n, • Daily tasks will involve working hand in hand with production in an Electronic Metering Production Department\n, • Determines the parts, equipment, and tools needed to achieve manufacturing goals according to product specifications.\n, • Generates, reviews and updates work instructions and procedures as necessary to improve cycle times, cost and quality.\n, • Works on projects/matters of limited complexity in a support role with other departments to assist in cost reduction and cycle time improvement.\n, • Assists engineering with Prototype builds and creates all necessary documentation to transition product to production.\n, • Assist production with ERP system (Netsuite/SAP) as necessary to ensure inventory and work orders are properly processed.\n\n What will help you thrive in this role? \n • Bachelor's degree in manufacturing engineering/Mechanical Engineering or similar technical area.\n, • 3-5 years' Experience in an electronics manufacturing environment where electrical testing of Printed Circuit boards and/or finished goods is performed\n, • Lean Six Sigma/5s Tools a Plus.\n, • Experience with wiring, cable assemblies, PCB's, soldering and mechanical assembly of electronics strongly recommended.\n Hubbell creates critical infrastructure solutions that power our customers, communities, people and the planet. Our company is strategically aligned around enabling grid modernization and electrification. As more products plug in to an aging grid, Hubbell solutions enable the transition to a more reliable, resilient and efficient energy infrastructure. Founded in 1888 our innovation has made us a leading global manufacturer of high quality electrical and utility solutions enabling customers to operate critical infrastructure reliably and efficiently. The company operates in two segments. Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications and Hubbell Electrical Solutions (HES) are essential to managing power across a wide range of industries and applications. Our vertical market solutions can be applied to markets including Data Centers, Renewables, Commercial Buildings, Industrial, Telecom and Transportation. Supporting both of our business segments is our corporate and Hubbell Unified Business Solutions teams that provide consistent process, tools technologies across our businesses. We are committed to operating sustainably and ethically while promoting an inclusive and supportive culture for our people to grow and develop in their careers. Our employees proudly work and serve our communities from our headquarters in Shelton, CT, across the United States and around the globe. Hubbell Utility Solutions Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications. HUS provides the critical components that allow the grid to reliably transmit and distribute energy, as well as the communications and controls technologies to make the grid smarter and more flexible. Hubbell Incorporated, its subsidiaries and affiliates, is an EO Employer AA: M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender identity or any other protected class. The above summary of position responsibilities and requirements is not intended, and should not be construed, to be an exhaustive list of duties, skills, efforts, physical requirements, or working conditions associated with the position. It is intended to be an accurate reflection of those principal position elements essential for making decisions related to position performance, employee development, and compensation.

Position Summary: Responsible for core assembly of heat exchangers within the production environment. Supervisory Responsibilities: • None Duties and Responsibilities: • Assembly of cores for heat exchangers, • Operate equipment and tools to stretch, compress, size and cut FIN material, • Conduct general deburring of parts to meet quality standards, • Utilize basic hand tools and general mechanical tools effectively Required Skills and Abilities: • Demonstrate mechanical aptitude, • Must be able to read and interpret engineering blueprints., • Strong adherence to safety protocols and operational directions communicated in English, • Ability to work overtime based on the business needs which may include weekends. Education and Experience: • High School diploma, Trade School Diploma, or GED required, • Manufacturing/Production background preferred, not required., • Ability to read, write, and converse in English. Physical Requirements: • Ability to lift up to 50 lbs. with or without accommodations., • Ability to walk, stand, stoop, and bend 80% of the time during a shift, • Ability to work in a production environment with constant standing and movement Compensation Employee Type: Hourly Salary Minimum: $35,000 Salary Maximum: $40,000 Incentive: No Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location. For more information on AMETEK's competitive benefits, please click here. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.5 billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers' most complex challenges. We employ 22,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK is a component of the S&P 500. Visit for more information. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call 1 (866) 263-8359. Nearest Major Market: Long Island Nearest Secondary Market: New York City

Position Summary: Responsible for core assembly of heat exchangers within the production environment. Supervisory Responsibilities: • None Duties and Responsibilities: • Assembly of cores for heat exchangers, • Operate equipment and tools to stretch, compress, size and cut FIN material, • Conduct general deburring of parts to meet quality standards, • Utilize basic hand tools and general mechanical tools effectively Required Skills and Abilities: • Demonstrate mechanical aptitude, • Must be able to read and interpret engineering blueprints., • Strong adherence to safety protocols and operational directions communicated in English, • Ability to work overtime based on the business needs which may include weekends. Education and Experience: • High School diploma, Trade School Diploma, or GED required, • Manufacturing/Production background preferred, not required., • Ability to read, write, and converse in English. Physical Requirements: • Ability to lift up to 50 lbs. with or without accommodations., • Ability to walk, stand, stoop, and bend 80% of the time during a shift, • Ability to work in a production environment with constant standing and movement Compensation Employee Type: Hourly Salary Minimum: $35,000 Salary Maximum: $40,000 Incentive: No Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location. For more information on AMETEK's competitive benefits, please click here. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.5 billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers' most complex challenges. We employ 22,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK is a component of the S&P 500. Visit for more information. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call 1 (866) 263-8359. Nearest Major Market: Long Island Nearest Secondary Market: New York City

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology products, including mission systems, radio frequency ("RF") components, RF microwave/microelectronic assemblies, and technologically advanced printed circuit boards ("PCB"s). TTM stands for time-to-market, representing how TTM's time-critical, one-stop design, engineering and manufacturing services enable customers to reduce the time required to develop new products and bring them to market. Additional information can be found at Summary Provides basic engineering support to the production area to maintain optimum levels of productivity in terms of cycle times and quality. Assists in coordinating the introduction of new assembly processes on to the production floor by preparing operation sheets that describe specific production tasks. Assists design engineers throughout the design process from concept to prototype in order to ensure that maximum production efficiency. Essential Duties \n Compensation and Benefits: TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401k, flexible spending and health savings accounts, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available on the 1st of the month following date of hire. For some positions, only PTO and holiday benefits are offered. Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is: $68,004 - $113,340 Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

Job Location(s) US-NY-Old Westbury Job ID 2025-4083 Division College of Engineering & Computing Sciences Position Type Adjunct Type Regular Part-Time Category College of Engineering and Computing Sciences New York Institute of Technology's six schools and colleges offer undergraduate, graduate, and professional degree programs in in-demand disciplines including computer science, data science, and cybersecurity; biology, health professions, and medicine; architecture and design; engineering; IT and digital technologies; management; and energy and sustainability. A nonprofit, independent, private, and nonsectarian institute of higher education founded in 1955, it welcomes nearly 8,000 students worldwide. The university has campuses in New York City and Long Island, New York; Jonesboro, Arkansas; and Vancouver, British Columbia, as well as programs around the world. More than 112,000 alumni are part of an engaged network of physicians, architects, scientists, engineers, business leaders, digital artists, and healthcare professionals. Together, the university's community of doers, makers, healers, and innovators empowers graduates to change the world, solve 21st-century challenges, and reinvent the future. For more information, visit nyit.edu. The BS Mechanical Engineering program at New York Institute of Technology is looking for adjunct professors to teach courses for this program, such as Material Science, Energy Systems. Candidates should have a M.S or Ph.D. degree in Mechanical Engineering or a related area. Teaching experience or industrial experience in Materials Science, Thermal/Fluid are preferred. New York Institute of Technology is an Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. In compliance with local legislation as well as to provide greater transparency to candidates, the annual base salary range for this position is listed. New York Tech considers factors such as (but not limited to) scope and responsibilities of the position, candidate experience/expertise, education/training, key skills, geographic location, internal peer equity as well as market, organizational considerations and/or applicable collective bargaining agreement when extending an offer. Adjunct Faculty offered hourly rate is contingent on applicable rank. USD $99.00/Hr. USD $108.00/Hr.

Job DescriptionDescription: JOB TITLE: RF Technician Job Summary: As a RF Technician, you will perform advanced RF/Microwave system testing, trouble shooting, and electro-mechanical diagnostics for sub-assemblies and high-level system assemblies. This ideal candidate possesses exceptional troubleshooting skills in RF technology and Analog/Digital circuits, with the ability to work independently or collaboratively in a dynamic environment. Key responsibilities: · Conduct testing and troubleshooting of RF/Microwave sub-assemblies and upper-level assemblies according to system specifications. · Develop test procedures and create documentation, including Data Sheets and Acceptance Test Procedures (ATP) · Perform evaluation, acceptance, and sell-off testing in compliance with in-house QA standards and government audits. · Assist in reverse engineering of RF based products and generate schematics from existing circuits. · Utilize commercial test equipment, including Spectrum Analyzers, Vector Network Analyzers, Power Meters, and Oscilloscopes, with proficiency. · Calibrate, maintain, and repair electronic test equipment and oversee the upkeep of the Environmental Testing Facility assets. · Maintain and manage the computerized calibration database for IM & TE (Inspection, Measuring and Test Equipment) assets. · Recall IM & TE due for calibration to ensure operational accuracy and compliance. · Work independently and as part of a team with minimal supervision to meet project deadlines and deliver high-quality results. · Collaborate with engineering team to resolve technical challenges and optimize performance. Required Qualifications: · Associate’s degree in Electrical Technology/Electronics or equivalent · Extensive experience (7+ years) in a fast-paced repair or production environment may be considered in lieu of formal education. · Proficient in the use of advanced RF test equipment, including Spectrum Analyzers, Vector Network Analyzers Power Meters and Oscilloscopes. · Experience in developing and documenting test procedures. · Strong analytical, organizational and communication skills. Preferred Qualifications: · Familiarity with ESD handling protocols and production safety standards. · Experience with Power Amplifiers and Low Noise Amplifiers. Why Join U.S Dynamics Corporation? At U.S Dynamics Corporation, you will be a part of a supportive and innovative environment that fosters growth and values your professional development. We offer competitive compensation, comprehensive benefits, and opportunities for advancement. Join us in shaping the future with your talent and expertise. Requirements:

Job Description Hazen and Sawyer is seeking a Construction Inspector to support the construction of water and wastewater treatment facilities and infrastructure located in the greater NYC Metro area and Springfield, MA. The selected candidate will inform the CM team by observing and reporting on construction activities, effectively coordinating and collaborating with the project team members, and providing documentation and inspection activities for various water and wastewater facilities and infrastructure. Responsibilities include: • Review and interpret project drawings, specifications and work plans to verify contractor compliance;, • Conduct on-site observation, monitoring, inspection, and evaluation of construction activities;, • Verify and track work in accordance with approved shop drawing submittals;, • Observe contractor performance and compliance with safety requirements;, • Prepare daily reports, verify material quantities, Time and Material (T&M) records and review contractor pay applications;, • Monitor construction contractor’s adherence to project schedule and sequence of activities related to daily field observations;, • Maintain project redline and as-built drawings;, • Coordinate and communicate effectively with the CM Project team, multi-discipline engineering teams, contractors and third-party inspection/testing firms;, • Assist and coordinate with project start-up, testing checkout and training activities;, • Minimum 5 years of construction / construction observation experience;, • Familiarity with construction methods typical of civil, structural, mechanical and/or electrical engineering work;, • Excellent verbal, written, and interpersonal skills, organizational and problem-solving skills;, • Experience working on and collaborating with multidisciplinary teams, • Willing to travel and stay local to projects in the NYC Metro area as needed., • Proficiency with Microsoft Office Suite, Microsoft Project and related PC software packages used on construction projects, • Experience in municipal water and wastewater or similar industry construction inspection preferred

Job Description We’re hiring a hands-on industrial machine builder to assemble and build bag-making / film converting machinery from mechanical engineering drawings, BOMs, and specifications. This is a shop-floor build role involving precision mechanical assembly, alignment, troubleshooting during build, and supporting machine test/run-off. Important: This position is for candidates who have built or assembled industrial machinery / OEM equipment. Candidates with only automotive repair backgrounds (engines, brakes, general vehicle service) will not be considered unless they also have direct industrial machine build experience. What You’ll Do (Key Responsibilities) • Build complete OEM converting/bag machines and subassemblies from prints, exploded views, and BOMs., • Read and interpret mechanical engineering drawings (dimensions, tolerances, fits, fastener callouts, assembly notes)., • Perform precision installation and alignment of mechanical components, including: shafts, bearings, rollers/web-handling assemblies chain/belt drives, gearboxes, couplings, pneumatic components (FRLs, valves, cylinders), basic hydraulics if applicable, motors and mechanical power transmission components., • Use measurement and inspection tools to achieve proper fit and alignment (calipers, micrometers, indicators, feeler gauges, straight edges, torque tools, etc.)., • Troubleshoot mechanical issues during build and test: binding/misalignment, vibration, tracking issues, inconsistent motion, air leaks, premature wear, etc., • Partner with engineering and production to: clarify prints, flag part/drawing discrepancies, suggest build improvements (access, serviceability, repeatability)., • Complete build documentation: assembly checklists, punch lists, redlines/feedback to engineering and quality notes. To be considered, you must have: • 3+ years of hands-on experience building/assembling industrial machinery (OEM machine builder, industrial machine assembler, millwright, packaging machinery assembler, converting equipment tech, similar)., • Demonstrated ability to read and build from mechanical engineering drawings and parts lists (not just “looking at pictures”)., • Strong working knowledge of: bearings, shafts, pulleys/sprockets, chain drives, gear assemblies, fasteners, torque practices, alignment methods, precision fit-up, pneumatics (cylinders/valves/regulators, tubing, leak checks)., • Comfort using common hand/power tools and precision measuring tools., • Experience with bag-making, film converting, flexible packaging, or web-handling machinery., • Ability to read pneumatic schematics and build circuits cleanly., • Experience participating in machine testing, debug, run-off, or FAT support., • Shop-floor manufacturing environment (standing, bending, lifting, use of hand/power tools)., • Must be able to lift up to 50 lbs (with assistance/mechanical support for heavier assemblies as required)., • Competitive hourly wage (based on experience), • Paid vacation and sick time, • Health and dental insurance, • 401K Plan Please submit a resume that includes: • Industrial machinery you have built/assembled (types of machines, your role, years of experience), • Evidence of your experience reading prints (assemblies, tolerances, BOMs) Pay: $23.00 - $27.00 per hour Expected hours: 40 per week Benefits: • 401(k), • Dental insurance, • Health insurance, • Paid time off

Job Description Schivo Medical in Plainview, New York, is a manufacture of a vast array of different products including robotic surgery instruments, neurosurgical tools, and cardiovascular closure devices that treat chronic disease in new ways so people can live better and longer. We are seeking to hire a strong innovative individual to join the engineering Team. As an employee of Schivo Medical, you will tackle a wide array of problems, including some of the world’s greatest medical challenges. You will be part of a company committed to helping you build a fulfilling and rewarding career. Manufacturing Engineer Position Summary: A Manufacturing Engineer is responsible for implementing and reviewing the procedures and equipment involved in the manufacturing process. Which includes researching automation techniques, testing new systems for efficiency and planning factory layouts to optimize production. Lead or assist in the cost estimating process. Manufacturing Engineer Essential Duties and Responsibilities: • Evaluate manufacturing processes based on quality criteria, such as efficiency and speed., • Provide cost estimations for new and existing projects., • Create, evaluate, and implement manufacturing processes., • Study production and machine requirements., • Develop and test effective automated and manual systems., • Design and install equipment., • Implement manufacturing processes that result in high-quality products., • Organize and manage manufacturing workflows and resources., • Optimize facility layouts, production lines, machine operations and network performance., • Resolve issues and delays in production., • Find ways to reduce costs and maximize quality., • Train staff in new and existing processes, • Collaborate with other engineers, contractors, and suppliers., • Ensure that manufacturing procedures follow safety and environmental regulations., • Upgrade systems and processes with recent technology., • Strong focus on new product implementation., • Proven experience with repeatable jobs. Manufacturing Engineer Necessary Education, Skills, and Competencies (including licensing and certifications): • Bachelor’s degree in mechanical engineering or related field, • 5 years of work experience as a manufacturing engineer or similar role, • Knowledge of manufacturing processes, fabrication methods and tool design, • Familiarity with manufacturing equipment and quality assurance techniques, • Commitment to health and safety standards and environmental regulations, • Well-versed in relevant software (e.g., CAD, MS Office), • Black belt certification a plus, • Continuous improvement, • Project management skills, • Problem-solving ability, • Teamwork skills Benefits: • 401(k), • 401(k)match, • Dental insurance, • Health insurance, • Vision insurance, • Generous Paid time off, • Paid holidays, • Employee referral program, • EAP Program, • Life insurance, • Pet inc, • Free coffee & tea daily Schivo Medical is an Equal Opportunity Employer. All qualified applicants will receive employment consideration without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, genetic information, disability, or protected veteran status.

Job DescriptionDescription: Aerospace Tool Designer Join our innovative aerospace engineering team as an Aerospace Tool Designer, where you will play a vital role in designing and developing essential tools that support the manufacturing and assembly of aircraft structural components. This position offers an exciting opportunity to contribute to the creation of high-precision tooling solutions that ensure quality and efficiency in aerospace production. Key Responsibilities: • Design, develop, and refine tools, jigs, fixtures, molds, and gauges used in aircraft manufacturing processes., • Support the entire tooling lifecycle, from initial concept and design reviews to procurement, production implementation, and documentation., • Collaborate with cross-functional teams to ensure tooling designs meet engineering specifications, safety standards, and production requirements., • Conduct design reviews and modify tooling based on feedback and testing results., • Maintain accurate documentation and configuration control for all tooling designs and revisions., • Assist in troubleshooting tooling issues during production and implement improvements as needed. Skills and Qualifications: • Strong understanding of manufacturing processes, materials, and aerospace standards in English., • Excellent problem-solving skills and attention to detail., • Ability to work collaboratively in a team environment and communicate effectively., • Knowledge of quality control and documentation procedures related to tooling. We foster a collaborative and innovative work environment that values continuous improvement and professional growth. Our company offers competitive benefits and opportunities to advance your career in the dynamic aerospace industry. Requirements: Key Responsibilities Tool Design & Modeling • Develop detailed 3D models and 2D drawings for a wide range of aerospace tooling, including assembly jigs, fixtures, molds, and gauges., • Design tooling solutions that support complex manufacturing and assembly challenges from concept through production., • Utilize CAD software such as Siemens NX, CATIA V5, and/or SolidWorks to create, modify, and maintain tooling designs., • Apply Geometric Dimensioning and Tolerancing (GD&T) principles to ensure accuracy, repeatability, and manufacturability., • Apply basic structural analysis principles and conduct research to validate tooling concepts and designs., • Ensure tooling meets quality, safety, ergonomic, and regulatory requirements., • Incorporate Design for Manufacturability (DFM) principles to ensure tools can be produced efficiently and cost-effectively., • Manage the complete tooling design lifecycle, from concept development through release to production., • Participate in and lead design reviews; provide constructive feedback to peers and stakeholders., • Develop tooling usage instructions, maintenance plans, and evaluation criteria, including calibration and load-testing requirements., • Support methodization and standardization of tooling and processes to improve product quality and reduce manufacturing cycle times., • Collaboration & Communication, • Work closely with cross-functional teams including Engineering, Manufacturing, Operations, and Quality., • Communicate effectively with internal stakeholders and external vendors to ensure tooling requirements, schedules, and deliverables are met., • Bachelor’s degree in Aerospace Engineering, Mechanical Engineering, Aeronautical Engineering, or a related field, with a minimum of four (4) years of aircraft tooling design experience., • In lieu of a degree, a minimum of eight (8) years of directly related aircraft tooling design experience., • Proven experience designing tooling for aerospace manufacturing or assembly environments is required. This position involves exposure to projects and contracts subject to the International Traffic in Arms Regulations (ITAR). As a result, only U.S. Citizens or Permanent Residents (Green Card holders) are eligible for employment in this role. Applicants must meet these requirements to be considered.

Job Description About the Role: The CNC Machine Operator plays a critical role in the manufacturing process by setting up, operating, and maintaining computer numerical control (CNC) machines to produce precision parts and components. This position requires a strong attention to detail to ensure that all products meet exact specifications and quality standards. The operator will interpret technical drawings and blueprints to program machines accurately and make necessary adjustments during production runs. Additionally, the role involves routine inspection of finished products and troubleshooting any mechanical issues to minimize downtime. Ultimately, the CNC Machine Operator contributes to efficient production workflows and supports the overall success of the manufacturing team. Shift hours 6:00am-2:30pm (for 6 months Wednesday to Sunday) * Minimum Qualifications: • High school diploma or equivalent., • Proven experience operating CNC machines in a manufacturing environment., • Basic understanding of CNC programming and machine setup., • Ability to read and interpret technical drawings and blueprints., • Certification in CNC operation or machining technology., • Experience with CAD/CAM software for programming CNC machines., • Knowledge of safety protocols and best practices in a manufacturing setting., • Strong mechanical aptitude and troubleshooting skills., • Set up CNC machines by loading tools, materials, and inputting programming instructions based on engineering drawings., • Operate CNC machinery to manufacture parts according to precise specifications and quality standards., • Monitor machine performance and make real-time adjustments to maintain product accuracy and efficiency., • Perform routine maintenance and cleaning of CNC equipment to ensure optimal operation and longevity., • Inspect finished products using measuring instruments to verify conformance to specifications and document results., • Collaborate with engineers and quality control teams to resolve production issues and improve processes. The CNC Machine Operator uses technical skills daily to interpret engineering drawings and translate them into precise machine instructions, ensuring parts are produced to exact specifications. Attention to detail is critical when monitoring machine operations and inspecting finished products to maintain high quality standards. Mechanical skills are applied when setting up machines, performing routine maintenance, and troubleshooting issues to minimize downtime. Communication skills facilitate effective collaboration with engineers, quality control personnel, and team members to optimize production processes. Additionally, familiarity with CNC programming and software enhances the operator's ability to adjust and improve machine performance efficiently. Benefits: • 401(k), • 401(k)match, • Medical insurance, • Paid time off, • Employee referral, • Voluntary Benefits, • STD/LTD Disability, • Life Insurance, • Pet Insurance, • Discount on vendor products Schivo Medical is a Equal Opportunity Employer. All qualified applicants will receive employment consideration without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, genetic information, disability, or protected veteran status.

Bachelor's degree in manufacturing engineering/Mechanical Engineering or similar technical area. Experience working with electronics, computers, automotive or robotics or similar technology field required. Assists engineering with Prototype builds and creates all necessary documentation to transitio

Job Description Mastech Digital provides digital and mainstream technology staff as well as Digital Transformation Services for all American Corporations. We are currently seeking an Inspector for our client in the Electronic Instruments and Electromechanical Manufacturing domain. We value our professionals, providing comprehensive benefits and the opportunity for growth. This is a Contract position, and the client is looking for someone to start immediately. Duration: 6+ Months Contract Location: Garden City, NY Salary: $26.00-$31.00/Hourly Role: Inspector Primary Skills: Engineering Role Description: The Inspector must have 5+ years of experience. In this role, you will be responsible for first piece inspection, in-process and final products using open set-up, CMM and inspection methods and techniques in accordance with drawing requirements and specifications. Must have good communication skills, able to read and follow client work instructions and quality procedures. Duties and Responsibilities: • Read and interpret aerospace engineering drawings using geometric dimensioning and tolerances including and understanding of maximum material conditions., • Inspect detail parts and assemblies per drawing requirement and specs using standard measuring equipment., • Prepare and maintain inspection reports., • Program and/or operate Coordinate Measuring Machine., • Perform Hardness testing., • Collect and tabulate data for SPC use., • Review Supplier F.A.I.R./Generate First Article Reports per AS9102., • Other duties as directed by the management. Required Skills and Abilities: • Basic computer knowledge including MS Excel and Word., • Interpret drawing requirements/specs and geometric dimensions and tolerances., • Familiar with MIL, NAS, MS, AMS, AWS and AS specifications and standards., • PCDMIS programming skills., • Familiar with special process specifications for heat treatment, welding, and non-destructive testing. Education and Experience: • High school graduate., • 3-5 Years of mechanical inspection, aerospace experience., • Post high school education in math, engineering, inspection techniques or related fields a plus. Equipment Used: • Vernier calipers., • Micrometers., • Height Gauges., • CMM machines., • Other standard measuring tools/instruments. Education: High School graduate/Bachelor’s degree Experience: Minimum 5+ years of experience Relocation: This position will not cover relocation expenses Travel: No Local Preferred: Yes Note: Must be able to work on a W2 basis (No C2C) Recruiter Name: Veena Grover Recruiter Phone: 412-525-7995 Benefits: We have various coverages and additional benefits to choose from: • Medical, Dental (Including Ortho) & Vision Insurance (Option to Enroll)., • Paid Leaves (Wherever applicable)., • Life & Disability Coverage (Upon eligibility)., • 401K Option, Education Assistance Program and more. Mastech Digital is an Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

Job Description The IoTMS Technician III is responsible for the configuration and troubleshooting of technology devices and onboarding of new products and offerings. This role involves programming devices to ensure optimal performance, conducting tests to verify functionality, and kitting and packing devices for shipment. The technician collaborates with stakeholders such as the engineering and quality teams to enhance device configuration efficiency and accuracy while maintaining thorough documentation of adherence to all processes. ESSENTIAL FUNCTIONS Financial • Ensure cost-effective testing, configuration, imaging, kitting, packing processes for shipment of customer orders., • Optimize refurbishing and/or repair of wireless devices, using inventory and time efficiently. Customer • Configure wireless communication devices and other related hardware quickly and accurately., • Ensure optimal performance by adjusting settings and performing necessary calibrations., • Complete accurate shipment of orders for delivery on time. Business Process • Streamline device return, configuration, and order preparation processes., • Follow documented procedures for device testing, repair, refurbishing, imaging and configuration., • Collaborate with team members and stakeholders to share best practices and troubleshoot complex issues., • Provide Technical process support and training to Production personnel, • Maintain knowledge on OEM specific HW, Connectivity, and applicable Platforms, • Conduct Production Feasibility Assessment., • Provide time studies pertaining to Production processes., • Support process improvement initiatives and activities., • Provide engineering support to determine root cause and implement corrective actions on internal and customer related manufacturing problems. • Troubleshoot technical/process issues. Learning and Development • Engage in continuous personal development by seeking feedback and participating in training opportunities., • Mentor junior technicians and contribute to team knowledge-sharing and training sessions to improve collective skills and foster a culture of continuous learning and improvement. QUALIFICATIONS • High School Diploma, GED, or equivalent., • 3+ years’ experience in a technical and/or manufacturing role preferred., • Experience writing, testing, or debugging software., • Experience with electrical, mechanical, and computer hardware., • Experience working in an ISO (9001 & 13485) environment., • Ability to read and analyze information and data and perform basic math., • Proficient using Microsoft Office applications., • Experience providing technical customer service, such as tech support and/or installation/repair service preferred. SKILLS/COMPETENCIES • Strong communication skills, both verbal and written, with a customer-centric approach., • Proficiency in problem-solving and critical thinking., • Ability to work independently and as part of a team., • Ability to multi-task and contribute Kore Values Customer Obsession We earn trust through deep understanding and relentless commitment. We earn the trust of our customers and aim to delight them through our solutions – we want to be loved by our customers. Be the Spark We lead with energy, creativity, and urgency. We don't wait for change – we ignite it. We listen, engage, and encourage others to participate. Own the Outcome We take accountability seriously – delivering on our promises to customers, teammates, and ourselves. We finish what we start. We think like owners and we’re frugal where it makes sense. Grit & Positivity We face challenges head-on – with resilience, optimism, and determination. We look at these situations as an opportunity to create a positive outcome. When we make a commitment, we deliver. We challenge those in a respectful way that do not meet their commitments. Challenge. Debate. But Be Human. We speak up, question assumptions, and challenge ideas – not people. We aim for the best outcomes through respectful, direct, and open dialogue, keeping in mind we’re all on the same team. Working Conditions The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally required to remain stationary; move; lift and/or move up to 15 pounds. The employee must regularly sit; use hands to finger, handle, or feel; reach with hands and arms; communicate. Specific vision abilities required by this job include close vision. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. “KORE Wireless Group, Inc. is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of any kind. KORE is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at KORE are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, sex (including pregnancy), age physical, mental or sensory disability, HIV Status, sexual orientation, gender identify and/or expression, marital, civil union or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. KORE will not tolerate discrimination or harassment based on any of these characteristics.”

Required Combination of Knowledge and Skill Bachelors degree from an accredited college or university in a related technical, engineering or science field; or Masters degree from an accredited college or university in a related technical, engineering or science field. Looking for a lifetime career?

Required Combination of Knowledge and Skill Bachelors degree from an accredited college or university in a related technical, engineering or science field; or Masters degree from an accredited college or university in a related technical, engineering or science field. For nearly 70 years, the Naval

Project management skillsHighly organized and efficientPossess leadership and interpersonal skillsStrong problem-solving skillsEducation and Experience:Bachelor’s degree in Industrial Engineering3-5 years of progressive experience in manufacturing engineering. Review product designs for manufactur

Bachelor’s degree in Engineering, process engineering, packaging technology, chemical engineering, or related field (Master’s preferred).

Either a BS/MS in mechanical/chemical engineering (or related field), a track record of transitioning prototypes to manufacturing and scaling up production.

Previous experience working with integrating electrical and mechanical systems a plus. Bachelor’s degree in Engineering or related discipline.

Mechanical Engineer Job Duties: Designs mechanical and electromechanical products and systems by developing and testing specifications and methods. Develops mechanical and electromechanical products by study

A global professional services firm in Jericho is looking for a candidate with over 10 years of experience in solution development and engineering.

Degrees in Mechanical Engineering are preferred, but not required. Mechanical engineering experience. New Construction Operations personnel are cognizant of the processes, procedures, and technical engineering support necessary to assemble and install the power units into ships.

Bachelor's degree in mechanical engineering or a related technical discipline, or equivalent experience. Profile Bachelor's degree in mechanical engineering or a related technical discipline, or equivalent experience. They operate in a fast‑paced engineering environment where custom machine design

Experience with engineering safety or industrial engineering. Degrees in Mechanical, Nuclear, Chemical, Aerospace, Industrial, or Environmental Engineering are preferred, but not required. Ready to influence the future of naval nuclear propulsion? Join a team where your ideas and engineering skills

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a si

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a si

Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly.Delivering with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can cash

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a si

Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly.Delivering with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can cash

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a si

Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly.Delivering with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can cash

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a si

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a si

Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly.Delivering with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can cash

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a si

Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly.Delivering with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can cash