Mechanical engineering technology jobs in Hempstead, New YorkCreate job alerts

Job Description Mastech Digital provides digital and mainstream technology staff as well as Digital Transformation Services for all American Corporations. We are currently seeking an Inspector for our client in the Electronic Instruments and Electromechanical Manufacturing domain. We value our professionals, providing comprehensive benefits and the opportunity for growth. This is a Contract position, and the client is looking for someone to start immediately. Duration: 6+ Months Contract Location: Garden City, NY Salary: $26.00-$31.00/Hourly Role: Inspector Primary Skills: Engineering Role Description: The Inspector must have 5+ years of experience. In this role, you will be responsible for first piece inspection, in-process and final products using open set-up, CMM and inspection methods and techniques in accordance with drawing requirements and specifications. Must have good communication skills, able to read and follow client work instructions and quality procedures. Duties and Responsibilities: • Read and interpret aerospace engineering drawings using geometric dimensioning and tolerances including and understanding of maximum material conditions., • Inspect detail parts and assemblies per drawing requirement and specs using standard measuring equipment., • Prepare and maintain inspection reports., • Program and/or operate Coordinate Measuring Machine., • Perform Hardness testing., • Collect and tabulate data for SPC use., • Review Supplier F.A.I.R./Generate First Article Reports per AS9102., • Other duties as directed by the management. Required Skills and Abilities: • Basic computer knowledge including MS Excel and Word., • Interpret drawing requirements/specs and geometric dimensions and tolerances., • Familiar with MIL, NAS, MS, AMS, AWS and AS specifications and standards., • PCDMIS programming skills., • Familiar with special process specifications for heat treatment, welding, and non-destructive testing. Education and Experience: • High school graduate., • 3-5 Years of mechanical inspection, aerospace experience., • Post high school education in math, engineering, inspection techniques or related fields a plus. Equipment Used: • Vernier calipers., • Micrometers., • Height Gauges., • CMM machines., • Other standard measuring tools/instruments. Education: High School graduate/Bachelor’s degree Experience: Minimum 5+ years of experience Relocation: This position will not cover relocation expenses Travel: No Local Preferred: Yes Note: Must be able to work on a W2 basis (No C2C) Recruiter Name: Veena Grover Recruiter Phone: 412-525-7995 Benefits: We have various coverages and additional benefits to choose from: • Medical, Dental (Including Ortho) & Vision Insurance (Option to Enroll)., • Paid Leaves (Wherever applicable)., • Life & Disability Coverage (Upon eligibility)., • 401K Option, Education Assistance Program and more. Mastech Digital is an Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

Job Description Travel Required: 30-mile radius from Westbury to Manhattan We are seeking an HVAC Sheetmetal Drafter to become part of our team! Our projects intersect many sectors from Leading Technology Firms/Hotels/Educational Campuses/Bio Labs/Multi-Family Housing/Commercial Industries/Finance Industry/Tenant Fit out and more...Employees gain a wealth of experience through drafting different projects and regularly interact with Design Professionals to gain project approval. Qualifications: • Proficiency in CAD, Navisworks, and other drafting tools, • Strong understanding of mechanical engineering principles and design standards, • Detail-oriented individual with strong analytical and problem-solving abilities, • Self-motivated and driven self-starter with high integrity, • Excellent communication, interpersonal, and commitment to getting the job completed with accuracy, • Work with senior draftsmen, estimating team and project management team to understand the scope of work and installation intent to accurately design and produce shop drawings and as-built drawings, • Field Surveying Job Site to confirm dimensions, • Ensure compliance with benchmarks, ceiling heights and tolerances, • Flag conflicts on shop drawings that require architect/engineer review, • Ability to layout equipment and orientation of mechanical equipment as required, • Conduct thorough reviews of mechanical plans and drawings for accuracy, compliance, and feasibility, • Produce accurate shop drawings based on industry standard and norms, • Review and modify designs if mechanical plans presented are not achievable Company DescriptionFounded in 1992, ALL-CITY METAL, INC., is a leader in both sheet metal HVAC fabrication and installation, as well as the fabrication, manufacturing and installation of Trash Compactors, Trash Chutes, Linen Chutes and chute doors. We are a full service company that designs and manufactures our products onsite in the USA. We offer a variety of products including the above and related specialty items, accessories, hardware and components.Founded in 1992, ALL-CITY METAL, INC., is a leader in both sheet metal HVAC fabrication and installation, as well as the fabrication, manufacturing and installation of Trash Compactors, Trash Chutes, Linen Chutes and chute doors. We are a full service company that designs and manufactures our products onsite in the USA. We offer a variety of products including the above and related specialty items, accessories, hardware and components.

Job DescriptionElectrical Engineer – Autonomous Weapons & Drone Systems Onsite | Great Neck, NY Full-Time | U.S. Citizenship or ITAR Eligibility Required Be part of a mission-driven team redefining autonomous defense. Wild West Systems builds next-generation drones and munitions for America and her allies - fast, affordable, and superior by design. As an Electrical Engineer, you'll help design, prototype, and deploy electronics for autonomous systems that change how the battlefield operates. ???????? About Wild West Systems Wild West Systems is a defense technology startup breaking conventions in autonomous edge defense through modular, AI-powered weapon platforms - designed, built, and launched in the USA. We arm the future warfighter with precision, affordability, and swagger. If you thrive on speed, grit, and purpose - welcome to the frontier. Why This Role Matters As an Electrical Engineer at Wild West Systems, you'll design the electronic backbone of our drone and munitions platforms - taking concepts from whiteboard to field-ready systems. You'll work directly with seasoned engineers across hardware, software, and mechanics to bring ideas into reality. You'll be part of a small, fast team where every design, every wire, and every test matters. What You'll Do • Electrical Design: Develop electronic systems from schematic to PCB layout and production release (Altium preferred)., • Prototype & Test: Support bring-up and validation of boards, including signal integrity checks, power testing, and troubleshooting., • Power Systems: Design and manage battery management, voltage regulation, and power distribution systems., • Integration: Collaborate with mechanical, propulsion, and firmware teams to ensure seamless system function., • Documentation: Produce detailed schematics, BOMs, and test procedures for builds., • Continuous Improvement: Participate in design reviews, trade studies, and field tests to refine performance and reliability., • B.S. in Electrical or Electronics Engineering (or related field), • 2–4 years of hands-on experience designing and testing electronic hardware, • Experience with PCB design tools (Altium strongly preferred), • Solid foundation in analog/digital circuits, grounding, and power integrity, • Comfortable with lab tools - oscilloscopes, logic analyzers, soldering equipment, • Familiar with embedded hardware (MCUs, sensors, CAN/SPI/I²C/UART comms), • Thrives in high-speed, hands-on, high-ownership environments, • Experience in defense, aerospace, or robotics hardware design, • Knowledge of military standards (MIL-STD-461, MIL-STD-810), • Exposure to motor drives, ignition systems, RF, or wireless links, • Familiarity with DFM/DFA and rugged design principles, • IPC-related experience (IPC-A-600, CID/CID+), • Experience with field testing or manufacturing support Why You'll Love It Here, • Mission That Matters: Build systems protecting America and her allies., • True Ownership: Small team, direct impact, zero bureaucracy., • Elite Benefits:, • 100% coverage for employee health, dental, and vision, • 90% coverage for spouse/family, • Culture of Action: Fast decisions, real results, no wasted time.Additional Info, • Onsite position based in Great Neck, NY, • Must meet ITAR requirements, • Uses E-Verify for work authorization, • No staffing agencies - direct applicants only

Job Description Hazen and Sawyer is seeking a Construction Inspector to support the construction of water and wastewater treatment facilities and infrastructure located in the greater NYC Metro area and Springfield, MA. The selected candidate will inform the CM team by observing and reporting on construction activities, effectively coordinating and collaborating with the project team members, and providing documentation and inspection activities for various water and wastewater facilities and infrastructure. Responsibilities include: • Review and interpret project drawings, specifications and work plans to verify contractor compliance;, • Conduct on-site observation, monitoring, inspection, and evaluation of construction activities;, • Verify and track work in accordance with approved shop drawing submittals;, • Observe contractor performance and compliance with safety requirements;, • Prepare daily reports, verify material quantities, Time and Material (T&M) records and review contractor pay applications;, • Monitor construction contractor’s adherence to project schedule and sequence of activities related to daily field observations;, • Maintain project redline and as-built drawings;, • Coordinate and communicate effectively with the CM Project team, multi-discipline engineering teams, contractors and third-party inspection/testing firms;, • Assist and coordinate with project start-up, testing checkout and training activities;, • Minimum 5 years of construction / construction observation experience;, • Familiarity with construction methods typical of civil, structural, mechanical and/or electrical engineering work;, • Excellent verbal, written, and interpersonal skills, organizational and problem-solving skills;, • Experience working on and collaborating with multidisciplinary teams, • Willing to travel and stay local to projects in the NYC Metro area as needed., • Proficiency with Microsoft Office Suite, Microsoft Project and related PC software packages used on construction projects, • Experience in municipal water and wastewater or similar industry construction inspection preferred

Job DescriptionDescription: Aerospace Tool Designer Join our innovative aerospace engineering team as an Aerospace Tool Designer, where you will play a vital role in designing and developing essential tools that support the manufacturing and assembly of aircraft structural components. This position offers an exciting opportunity to contribute to the creation of high-precision tooling solutions that ensure quality and efficiency in aerospace production. Key Responsibilities: • Design, develop, and refine tools, jigs, fixtures, molds, and gauges used in aircraft manufacturing processes., • Support the entire tooling lifecycle, from initial concept and design reviews to procurement, production implementation, and documentation., • Collaborate with cross-functional teams to ensure tooling designs meet engineering specifications, safety standards, and production requirements., • Conduct design reviews and modify tooling based on feedback and testing results., • Maintain accurate documentation and configuration control for all tooling designs and revisions., • Assist in troubleshooting tooling issues during production and implement improvements as needed. Skills and Qualifications: • Strong understanding of manufacturing processes, materials, and aerospace standards in English., • Excellent problem-solving skills and attention to detail., • Ability to work collaboratively in a team environment and communicate effectively., • Knowledge of quality control and documentation procedures related to tooling. We foster a collaborative and innovative work environment that values continuous improvement and professional growth. Our company offers competitive benefits and opportunities to advance your career in the dynamic aerospace industry. Requirements: Key Responsibilities Tool Design & Modeling • Develop detailed 3D models and 2D drawings for a wide range of aerospace tooling, including assembly jigs, fixtures, molds, and gauges., • Design tooling solutions that support complex manufacturing and assembly challenges from concept through production., • Utilize CAD software such as Siemens NX, CATIA V5, and/or SolidWorks to create, modify, and maintain tooling designs., • Apply Geometric Dimensioning and Tolerancing (GD&T) principles to ensure accuracy, repeatability, and manufacturability., • Apply basic structural analysis principles and conduct research to validate tooling concepts and designs., • Ensure tooling meets quality, safety, ergonomic, and regulatory requirements., • Incorporate Design for Manufacturability (DFM) principles to ensure tools can be produced efficiently and cost-effectively., • Manage the complete tooling design lifecycle, from concept development through release to production., • Participate in and lead design reviews; provide constructive feedback to peers and stakeholders., • Develop tooling usage instructions, maintenance plans, and evaluation criteria, including calibration and load-testing requirements., • Support methodization and standardization of tooling and processes to improve product quality and reduce manufacturing cycle times., • Collaboration & Communication, • Work closely with cross-functional teams including Engineering, Manufacturing, Operations, and Quality., • Communicate effectively with internal stakeholders and external vendors to ensure tooling requirements, schedules, and deliverables are met., • Bachelor’s degree in Aerospace Engineering, Mechanical Engineering, Aeronautical Engineering, or a related field, with a minimum of four (4) years of aircraft tooling design experience., • In lieu of a degree, a minimum of eight (8) years of directly related aircraft tooling design experience., • This position requires the use of approved safety footwear (ASTM F-2413 complaint) when accessing or working in production and workshop areas. This position involves exposure to projects and contracts subject to the International Traffic in Arms Regulations (ITAR). As a result, only U.S. Citizens or Permanent Residents (Green Card holders) are eligible for employment in this role. Applicants must meet these requirements to be considered.

Job Description About the Role: The CNC Machine Operator plays a critical role in the manufacturing process by setting up, operating, and maintaining computer numerical control (CNC) machines to produce precision parts and components. This position requires a strong attention to detail to ensure that all products meet exact specifications and quality standards. The operator will interpret technical drawings and blueprints to program machines accurately and make necessary adjustments during production runs. Additionally, the role involves routine inspection of finished products and troubleshooting any mechanical issues to minimize downtime. Ultimately, the CNC Machine Operator contributes to efficient production workflows and supports the overall success of the manufacturing team. Shift hours 6:00am-2:30pm (for 6 months Wednesday to Sunday) * Minimum Qualifications: • High school diploma or equivalent., • Proven experience operating CNC machines in a manufacturing environment., • Basic understanding of CNC programming and machine setup., • Ability to read and interpret technical drawings and blueprints., • Certification in CNC operation or machining technology., • Experience with CAD/CAM software for programming CNC machines., • Knowledge of safety protocols and best practices in a manufacturing setting., • Strong mechanical aptitude and troubleshooting skills., • Set up CNC machines by loading tools, materials, and inputting programming instructions based on engineering drawings., • Operate CNC machinery to manufacture parts according to precise specifications and quality standards., • Monitor machine performance and make real-time adjustments to maintain product accuracy and efficiency., • Perform routine maintenance and cleaning of CNC equipment to ensure optimal operation and longevity., • Inspect finished products using measuring instruments to verify conformance to specifications and document results., • Collaborate with engineers and quality control teams to resolve production issues and improve processes. The CNC Machine Operator uses technical skills daily to interpret engineering drawings and translate them into precise machine instructions, ensuring parts are produced to exact specifications. Attention to detail is critical when monitoring machine operations and inspecting finished products to maintain high quality standards. Mechanical skills are applied when setting up machines, performing routine maintenance, and troubleshooting issues to minimize downtime. Communication skills facilitate effective collaboration with engineers, quality control personnel, and team members to optimize production processes. Additionally, familiarity with CNC programming and software enhances the operator's ability to adjust and improve machine performance efficiently. Benefits: • 401(k), • 401(k)match, • Medical insurance, • Paid time off, • Employee referral, • Voluntary Benefits, • STD/LTD Disability, • Life Insurance, • Pet Insurance, • Discount on vendor products Schivo Medical is a Equal Opportunity Employer. All qualified applicants will receive employment consideration without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, genetic information, disability, or protected veteran status.

Job Location(s) US-NY-Old Westbury Job ID 2025-4083 Division College of Engineering & Computing Sciences Position Type Adjunct Type Regular Part-Time Category College of Engineering and Computing Sciences New York Institute of Technology's six schools and colleges offer undergraduate, graduate, and professional degree programs in in-demand disciplines including computer science, data science, and cybersecurity; biology, health professions, and medicine; architecture and design; engineering; IT and digital technologies; management; and energy and sustainability. A nonprofit, independent, private, and nonsectarian institute of higher education founded in 1955, it welcomes nearly 8,000 students worldwide. The university has campuses in New York City and Long Island, New York; Jonesboro, Arkansas; and Vancouver, British Columbia, as well as programs around the world. More than 112,000 alumni are part of an engaged network of physicians, architects, scientists, engineers, business leaders, digital artists, and healthcare professionals. Together, the university's community of doers, makers, healers, and innovators empowers graduates to change the world, solve 21st-century challenges, and reinvent the future. For more information, visit nyit.edu. The BS Mechanical Engineering program at New York Institute of Technology is looking for adjunct professors to teach courses for this program, such as Material Science, Energy Systems. Candidates should have a M.S or Ph.D. degree in Mechanical Engineering or a related area. Teaching experience or industrial experience in Materials Science, Thermal/Fluid are preferred. New York Institute of Technology is an Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. In compliance with local legislation as well as to provide greater transparency to candidates, the annual base salary range for this position is listed. New York Tech considers factors such as (but not limited to) scope and responsibilities of the position, candidate experience/expertise, education/training, key skills, geographic location, internal peer equity as well as market, organizational considerations and/or applicable collective bargaining agreement when extending an offer. Adjunct Faculty offered hourly rate is contingent on applicable rank. USD $99.00/Hr. USD $108.00/Hr.

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology products, including mission systems, radio frequency ("RF") components, RF microwave/microelectronic assemblies, and technologically advanced printed circuit boards ("PCB"s). TTM stands for time-to-market, representing how TTM's time-critical, one-stop design, engineering and manufacturing services enable customers to reduce the time required to develop new products and bring them to market. Additional information can be found at Position Summary: TTM is an advanced-technology leader in highly sophisticated surveillance, communications, analysis and integration solutions. Our systems are deployed across a wide range of land, sea and air applications, providing our aerospace, defense and commercial customers with a distinct tactical advantage. In this role, the PCB Staff Design Engineer will design moderate to complex printed circuit board (PCB) layouts in the domain of Digital, Analog, Power & RF interconnect applications. This includes responsibility for circuit board layout conceptualization, (CAD application by means of Siemens Xpedition, PAD's or Cadence Allegro tool sets), detail design activities and value-engineering in support of internal TTM programs. Areas of emphasis/focus include physical design (CAD implementation)/documentation utilizing best practice of electrical IPC standards/methodologies with experienced approach to manufacturing and sustaining maintenance of legacy design projects. Complementary support provided by a combination of TTM Management, Field Application Engineering, Electrical/Mechanical Engineering and NPI Manufacturing teams. Duties and Responsibilities: Design Engineering Physical Design • PCB concept sketches for assistance in design layout estimating, • PCB design suggestions/trade-offs regarding initial engineering inputs, • Support changes to existing schematic diagrams using TTM suite of tools: OrCAD and/or DxDesigner \n • Place and route components ensuring that all electrical and physical specifications meet the detailed design requirements for each PCB design. Utilization of Siemens Xpedition/PAD's and/or Cadence Allegro required\n, • Participate in design reviews, interface with electrical, mechanical, manufacturing and process engineers to design proto-type and production printed circuit boards in accordance with TTM standards and quality procedures\n, • Collaborate on assigned projects closely with Si (Signal Integrity) or various engineering disciplines, fellow designers and Program \n\n Leadership \n • Provide layout feedback to design engineers as needed to ensure functionality and manufacturability of PCB designs\n, • Create fabrication and assembly drawings (AutoCAD 2023), parts list & incorporate changes to existing design documentation. Create and maintain component libraries\n\n\n, • Generate all output files (ODB++, Bill of Materials & PCB/CCA documentation) required for the manufacture of the board and assembly\n, • Maintain change (PCN) responsibilities on re-design and documentation updates\n\n Industry and TTM-specific electrical standards and methodologies- \n • Product safety and EMI consideration during eCAD layout (UL, CSA, NEBS, Etc.)\n, • Standardization of electrical components and eCAD libraries utilizing IPC or vendor specific standards\n, • Exceedingly experienced with High-Speed PCB Design Constraints: Differential Pairs, Routing Topologies, Controlled Impedance, Length-matched Traces and Delay Tuning\n, • Demonstrated experience with RF PCB routing complexities. Implement layout rules for RF transmission lines (Micro-strip & Coplanar Waveguide), signal line isolation practices, via fencing & unique RF routing structures\n, • Audio (Analog & Digital separation) PCB best practice layout guidelines highly recommended\n, • Direct design experience related to multi-layer CCA and Flex PCB technologies \n, • Current knowledge of µ-via/HDI layout methodologies and best practices\n, • Understanding of stack-up materials/construction along with impedance modeling requirements\n\n Education and Experience: Education: Minimum Associates in Electrical Design/Drafting or BS in Electronic Technology. Related eCAD training certification/career experience will be considered in lieu of a degreed program with 10 year experience. Experience: Minimum of 10 years' experience with primary hands-on demonstrated proficiency of Siemens PAD's (VX2.8 or later), Siemen's Xpedition (VX2.14 or later) and/or Cadence Allegro/OrCAD (17.4 or later) product experience is required. Comprehensive understanding of electrical and mechanical engineering design practices related to printed circuit board electrical drafting and fabrication drawing creation experience is essential. Necessary familiarities with electrical design utilizing IPC standards, IAW IPC-2221/3 and associated specs is critical. Knowledge and methodology utilizing standard IPC Class III approach to design and manufacturing concerns is also necessary. BS or related degree in engineering or a related discipline \n • Related PCB design for the Aerospace and Defense sectors is preferred.\n, • CID/CID++ Certification for PCB Designers highly recognized as professional validation of design, documentation, and manufacturability skills within the industry.\n, • Solid oral communication and interfacing skills with technical and manufacturing personnel to resolve engineering tasks. Propose alternatives when faced with challenging PCB design situations including resolutions to non-standard problems.\n\n, • Appropriate understanding of vendor component data sheets for creation of schematic library and/or PCB footprints expected.\n #LI-VT1 Compensation and Benefits: TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401k, flexible spending and health savings accounts, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available on the 1st of the month following date of hire. For some positions, only PTO and holiday benefits are offered. Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is: $101,807 - $179,040 Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

The Manufacturing Engineer must have the ability to analyze problems and processes and offer solutions or work with senior engineers to implement solutions. Experience working with electronics, computers, automotive or robotics or similar technology field required. Compensation will be based on experience and qualifications and will be discussed during the interview process. The salary range for this role is $105,000 - $120,000 annually and offers a competitive benefits package. #LI-KR1 Every day at Hubbell is different and you'll contribute in many ways. On any given day, you'll make a difference by: • Assists in planning and designing processes for an electronics manufacturing facility ., • Maximizes efficiency by analyzing layout of equipment, workflow, assembly methods, and work force utilization in an electronic environment., • Daily tasks will involve working hand in hand with production in an Electronic Metering Production Department, • Determines the parts, equipment, and tools needed to achieve manufacturing goals according to product specifications., • Generates, reviews and updates work instructions and procedures as necessary to improve cycle times, cost and quality., • Works on projects/matters of limited complexity in a support role with other departments to assist in cost reduction and cycle time improvement., • Assists engineering with Prototype builds and creates all necessary documentation to transition product to production., • Assist production with ERP system (Netsuite/SAP) as necessary to ensure inventory and work orders are properly processed., • Bachelor's degree in manufacturing engineering/Mechanical Engineering or similar technical area., • 3-5 years' Experience in an electronics manufacturing environment where electrical testing of Printed Circuit boards and/or finished goods is performed, • Lean Six Sigma/5s Tools a Plus., • Experience with wiring, cable assemblies, PCB's, soldering and mechanical assembly of electronics strongly recommended., • Netsuite experience a plus, or ability to learn new software to assist production Hubbell Incorporated Hubbell creates critical infrastructure solutions that power our customers, communities, people and the planet. Our company is strategically aligned around enabling grid modernization and electrification. As more products plug in to an aging grid, Hubbell solutions enable the transition to a more reliable, resilient and efficient energy infrastructure. Founded in 1888 our innovation has made us a leading global manufacturer of high quality electrical and utility solutions enabling customers to operate critical infrastructure reliably and efficiently. The company operates in two segments. Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications and Hubbell Electrical Solutions (HES) are essential to managing power across a wide range of industries and applications. Our vertical market solutions can be applied to markets including Data Centers, Renewables, Commercial Buildings, Industrial, Telecom and Transportation. Supporting both of our business segments is our corporate and Hubbell Unified Business Solutions teams that provide consistent process, tools technologies across our businesses. We are committed to operating sustainably and ethically while promoting an inclusive and supportive culture for our people to grow and develop in their careers. Our employees proudly work and serve our communities from our headquarters in Shelton, CT, across the United States and around the globe. Hubbell Utility Solutions Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications. HUS provides the critical components that allow the grid to reliably transmit and distribute energy, as well as the communications and controls technologies to make the grid smarter and more flexible. Hubbell Incorporated, its subsidiaries and affiliates, is an EO Employer AA: M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender identity or any other protected class. The above summary of position responsibilities and requirements is not intended, and should not be construed, to be an exhaustive list of duties, skills, efforts, physical requirements, or working conditions associated with the position. It is intended to be an accurate reflection of those principal position elements essential for making decisions related to position performance, employee development, and compensation.

Solar Racking and Mounting Director opportunity w/ National Green Energy Leader! This Jobot Job is hosted by: David DeCristofaro Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $140,000 - $220,000 per year A bit about us: We are a green energy leader, focused on building a sustainable future. With our innovative technology, we take solar energy and renewables to the next level! If you are looking for a forward-thinking company, always continuing to grow, innovate, and do right by it's employees and customers, then please read on! Why join us? • Lucrative Bonus Package!, • Cutting-Edge Projects!, • Focus on Environmental Sustainability!, • Excellent Pay and Benefits!, • Flexible Work/Life Balance!, • Unmatched Culture! Job Details We are seeking a Director of Engineering to manage and provide strong technical leadership, while setting and executing service strategies for our products and project engineering. Some skills and responsibilities include: • At least 10 years of experience with a strong preference Structural Engineering background or a Mechanical Engineer with significant structural engineering experience., • Must have experience managing engineering teams., • Oversees and directs the work of the creation of engineering methodologies and tools for the design of solar PV mounting solutions, • Set the technical standard of engineering and deliverables to support our EPC customers, • Develop existing, and build additional capabilities in our Structural and Applications engineering team, • Communicate with customers to build confidence and relationships, • Familiar with a variety of engineering design and application concepts, practices, and procedures (e.g., structural, aerodynamics, geotechnical, construction management, International Building Code), • Solar PV and UL2703 code application experience and knowledge preferred, • Licensed Professional Engineer preferred, • Must be willing to travel 20-25% Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job Description The IoTMS Technician III is responsible for the configuration and troubleshooting of technology devices and onboarding of new products and offerings. This role involves programming devices to ensure optimal performance, conducting tests to verify functionality, and kitting and packing devices for shipment. The technician collaborates with stakeholders such as the engineering and quality teams to enhance device configuration efficiency and accuracy while maintaining thorough documentation of adherence to all processes. ESSENTIAL FUNCTIONS Financial • Ensure cost-effective testing, configuration, imaging, kitting, packing processes for shipment of customer orders., • Optimize refurbishing and/or repair of wireless devices, using inventory and time efficiently. Customer • Configure wireless communication devices and other related hardware quickly and accurately., • Ensure optimal performance by adjusting settings and performing necessary calibrations., • Complete accurate shipment of orders for delivery on time. Business Process • Streamline device return, configuration, and order preparation processes., • Follow documented procedures for device testing, repair, refurbishing, imaging and configuration., • Collaborate with team members and stakeholders to share best practices and troubleshoot complex issues., • Provide Technical process support and training to Production personnel, • Maintain knowledge on OEM specific HW, Connectivity, and applicable Platforms, • Conduct Production Feasibility Assessment., • Provide time studies pertaining to Production processes., • Support process improvement initiatives and activities., • Provide engineering support to determine root cause and implement corrective actions on internal and customer related manufacturing problems. • Troubleshoot technical/process issues. Learning and Development • Engage in continuous personal development by seeking feedback and participating in training opportunities., • Mentor junior technicians and contribute to team knowledge-sharing and training sessions to improve collective skills and foster a culture of continuous learning and improvement. QUALIFICATIONS • High School Diploma, GED, or equivalent., • 3+ years’ experience in a technical and/or manufacturing role preferred., • Experience writing, testing, or debugging software., • Experience with electrical, mechanical, and computer hardware., • Experience working in an ISO (9001 & 13485) environment., • Ability to read and analyze information and data and perform basic math., • Proficient using Microsoft Office applications., • Experience providing technical customer service, such as tech support and/or installation/repair service preferred. SKILLS/COMPETENCIES • Strong communication skills, both verbal and written, with a customer-centric approach., • Proficiency in problem-solving and critical thinking., • Ability to work independently and as part of a team., • Ability to multi-task and contribute Kore Values Customer Obsession We earn trust through deep understanding and relentless commitment. We earn the trust of our customers and aim to delight them through our solutions – we want to be loved by our customers. Be the Spark We lead with energy, creativity, and urgency. We don't wait for change – we ignite it. We listen, engage, and encourage others to participate. Own the Outcome We take accountability seriously – delivering on our promises to customers, teammates, and ourselves. We finish what we start. We think like owners and we’re frugal where it makes sense. Grit & Positivity We face challenges head-on – with resilience, optimism, and determination. We look at these situations as an opportunity to create a positive outcome. When we make a commitment, we deliver. We challenge those in a respectful way that do not meet their commitments. Challenge. Debate. But Be Human. We speak up, question assumptions, and challenge ideas – not people. We aim for the best outcomes through respectful, direct, and open dialogue, keeping in mind we’re all on the same team. Working Conditions The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally required to remain stationary; move; lift and/or move up to 15 pounds. The employee must regularly sit; use hands to finger, handle, or feel; reach with hands and arms; communicate. Specific vision abilities required by this job include close vision. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. “KORE Wireless Group, Inc. is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of any kind. KORE is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at KORE are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, sex (including pregnancy), age physical, mental or sensory disability, HIV Status, sexual orientation, gender identify and/or expression, marital, civil union or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. KORE will not tolerate discrimination or harassment based on any of these characteristics.”

An established and leading Precision Timing & Frequency Technology Firm are looking for a Mechanical Engineer The Firm is seeking a Mechanical Engineer who thrives in environments where the path is not fully defined, the problems are new, and the solutions require creativity, rigor, and teamwork. Their products span precision oscillators, advanced atomic clocks, and emerging quantum‑sensing technologies. Responsibilities: • Design mechanical components and assemblies for high‑reliability electronic systems, from concept through detailed CAD models and drawings., • Perform structural and thermal analysis using tools such as ANSYS Mechanical, Icepak, or equivalent numerical methods, complemented by hand calculations and first‑principles reasoning., • Prototype, test, and iterate on new designs, including hands‑on work in the lab to evaluate mechanical and thermal performance., • Collaborate closely with electrical, firmware, manufacturing, and test teams to solve cross‑disciplinary challenges., • Apply design‑for‑manufacturing principles including tolerance analysis, fastening methods, machining processes, and material selection. Qualifications: • A bachelor’s or master’s degree in mechanical engineering or a related field, • Strong fundamentals in mechanics, heat transfer, materials, and engineering fundamentals, • Experience with CAD tools, • Exposure to FEA, CFD, or thermal modeling tools, or the ability to learn them quickly Salary: 115-135k base Comprehensive Benefits Package: They offer a comprehensive benefit package including : Health Insurance, Vision and Dental, Life Insurance, Short and Long Term Disability. Flexible spending options and 401K. They also offer a very lucrative paid time off policy as well as 11 paid Holidays.

MINIMUM QUALIFICATIONS for Entry Level E01 Engineer Bachelor&rsquos degree in Engineering (Chemical, Civil/Structural, Electrical, Industrial, Mechanical or Nuclear) Maintain minimum access requirements or unescorted access requirements, as applicable, and favorable medical examination and/or testin

Education requirements: Mechanical Engineering curriculum with applicable industry experience, BE/B Tech/BS. Mechanical design and development with 5+ years of experience in Semiconductor/High-tech/ Special purpose machine industry. Experience in Mechanical products design & development.

Bachelor’s degree in Mechanical or Manufacturing Engineering, or 5+yrs of manufacturing experience in a related field. Uses engineering drawings to program machinery for engineered items.

Mechanical Engineer Job Duties: Designs mechanical and electromechanical products and systems by developing and testing specifications and methods. Evaluates mechanical and electromechanical systems and prod

Bachelor's degree in mechanical engineering or a related field required. In this role, you will prototype and rework design concepts, generate fixture designs, make engineering drawings, execute testing, and analyze results. Mechanical design for consumer electronics (NX, SolidWorks, or equivalent p

Qualifications Bachelor's Degree in Mechanical Engineering Professional Engineering (PE) license required 7-10 years of industry experience Proven track record of designing multiple projects at the same time and meet deadlines Knowledge of NYS / NYC / International Building Codes. Mechanical Enginee

BS/MS Mechanical Engineering with 10 to 15 years of experience in power generation. Develop mechanical solutions, including design calculations, to meet stator product and service needs. Develop mechanical and testing plans for stator components and assemblies, and oversee or perform actual tests as

M&J) is a quality provider of multi-discipline engineering and construction management services with a focus on "Innovative and State-of-the Art Solutions". We specialize in providing full-service construction management, CE&I and design services for a full spectrum of industries encompassing constr

We're seeking industrial or mechanical engineers to help train AI-powered robotics systems for commercial and manufacturing environments. The ideal candidate is an industrial or mechanical engineer with hands-on experience in manufacturing floor operations, sensor reading, equipment monitoring, and

Looking for a lifetime career? Apply today! Job Description The Knolls Laboratory Weight Handling Engineering unit is seeking a Mechanical Engineer to join our Team! This role provides engineering support for maintenance and inspection of cranes, rigging equipment, and other weight handling equipmen