Trabajos Engineering en Hempstead, New YorkCrear alertas

Job Description Interested in the opportunity for a great career as a utility locator. Join T2 Utility Engineers (T2ue) in the Oceanside, New York as part of our Subsurface Utility Engineering (SUE) field tech team. Our SUE field techs gain on-the-job training in utility locating and utility designating, along with knowledge and experience in Subsurface Utility Engineering and surveying methods and technology. When you join our field tech team, you’re not confined to an office. T2ue provides you with outstanding benefits and an opportunity for a great career with room for advancement. Are you self-motivated and interested in learning? We’re looking for people interested in advancing and building a career with the leader in the utility locating industry. You don’t need experience in our industry to join our team. We’ll provide training, you provide the initiative to build a career with us. Since 1993, T2 Utility Engineers has provided professional Subsurface Utility Engineering and surveying services in support of infrastructure projects of all sizes and types. Using advanced technologies, our team of field technicians, engineers, and surveyors, provide quality data and professional insight to help our clients visualize, plan, and design their projects. Our mission is to provide project stakeholders with quality information, professional insight and deliverables that streamline construction, improve project safety and set the standard for the engineering industry. SUE Technician II responsibilities include, but are not limited to: • Be skilled in the operation of SUE utility locating and designating equipment, including pipe and cable locators, Ground Penetrating Radar (GPR), and non-destructive vacuum excavation, • Complete detailed accurate daily reports, forms and field sketches, both electronically as well as draft by hand, • Use of tools and equipment to conduct utility investigations, including jackhammer, pogo-tamper, concrete saw, compressor blower, vacuum hose, air lance, and hand tools, • Drive commercial motor vehicles, however a CDL license is not required, • Perform safety set-up and maintenance of traffic operations under direct supervision of senior field staff, • Assist with survey and data collection tasks, supporting overall crew activities, • Perform daily routine maintenance of equipment, • Perform daily basic vehicle maintenance Tech II Qualifications: • High School Diploma/GED, • 4+ years of experience in the utility locating industry or as a SUE Field Tech, • Ability to read and interpret utility company prints and design plans, • Valid driver's license with good driving record, • Ability to pass a pre-employment physical (U.S. only), • Ability to obtain a DOT medical card for CMV operation (U.S. only), • Ability to obtain a Secure Workers Access Card (SWAC), • Ability to lift 50 lbs. and perform physical movements necessary to operate heavy tools and equipment, • Ability to work outdoors in all climates, • Willingness to travel up to 50% of the time, by company vehicle or commercial airline, up to 2 week continuous stay., • Must have a good oral and written communication skills and attention to detail, • OSHA Safety certifications are a plus, • Please Note: Candidates will be required to pass a drug, background and reference screening (U.S. only) T2 Utility Engineers is an equal opportunity employer. We are committed to an inclusive, equitable and accessible workplace. Qualified applicants will receive consideration for employment without regard to race, colour, citizenship, creed, sex, sexual orientation, gender identity, gender expression, age, marital status, family status or disability. If you require an accommodation at any time during the recruitment or application process, please contact Human Resources. T2 Utility Engineers does not accept unsolicited resumes from any 3rd party agencies. No fee will be paid to 3rd parties who submit unsolicited resumes to any T2 Utility Engineer employee. Resumes from approved vendors must be specifically requested by T2 Utility Engineers and approved by the T2 Utility Engineers Talent Acquisition Team. We Offer a Complete Benefits Package! In addition to the opportunity to grow and advance, we offer competitive salaries, paid training, and comprehensive benefits with options to meet your needs, including; • Paid time off, • Paid overtime, • Paid holidays, • Company provided cell phone or cell phone allowance, • Boot and clothing allowance, • Generous daily food and incidentals allowance when overnight travel is required, • Medical and prescription drug coverage – multiple plan options, • Flexible Spending (FSA), Dependent Care (DCA), or Health Savings (HSA) accounts, • Dental, • Vision, • Wellness and Employee Assistance Programs, • Parental, Family and Medical leave, • 401-K retirement plan w/company match, • Life insurance, • Short / long term disability, • Tuition reimbursement, • Spot and annual bonus incentives, • Employee discounts and perks

Job Description CNC Machine Maintenance Engineer - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The CNC Machine Maintenance Engineer position is responsible for performing highly diversified duties to install, troubleshoot, repair, and maintain production and facility equipment according to safety, predictive, and productive maintenance systems and processes to support the achievement of the site’s business goals and objectives. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Perform highly diversified duties to install and maintain production machines and the plant facility’s equipment., • Provide emergency/unscheduled repairs of production equipment during production and perform scheduled maintenance repairs of production equipment during machine service. Must have experience with Vacuum Braze Ovens., • Perform simple machinist duties and responsibilities., • Perform mechanical skills, including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting, and repair of production machines., • Read and interpret equipment manuals and work orders to perform required maintenance and service., • Diagnose problems, replace or repair parts, test, and make adjustments., • Perform regular preventive maintenance on machines, equipment, and plant facilities., • Perform a variety of plumbing maintenance and carpentry functions., • Use a variety of hand and power tools, electric meters, and material handling equipment in performing duties., • Detect faulty operations, defective material, and report those and any unusual situations to proper supervision., • Comply with safety regulations and maintain clean and orderly work areas. QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Technical Capacity., • Good Troubleshooting Ability., • Ethical Conduct., • Communication Proficiency., • Results Driven., • Initiative., • Valid Driver’s License., • Experience with the maintenance of CNC Machines or Vacuum Braze Ovens EDUCATION AND/OR EXPERIENCE • High school diploma/GED and completion of a craft apprenticeship, or an equivalent number of years of education and production maintenance experience., • 2+ years of manufacturing experience; some hydraulic, pneumatic, mechanical, and industrial skills with PLC experience, Industrial and Commercial electric, and HVAC., • AA in mechanical or electrical Engineering or a Certificate in Analytical Troubleshooting preferred. 5+ years in manufacturing/facilities maintenance preferred. PHYSICAL DEMANDS • While performing the duties of this job, the employee is regularly required to talk and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing all day. The employee must frequently lift and/or move items over 50 pounds., • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Fine manipulation and repetitive motion may be required for some duties. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $110,000 to $125,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Senior Civil Engineer US-NY-Mineola Job ID: 2023-2871 Type: Regular Full-Time of Openings: 1 Category: Civil/Structural Engineering The LiRo Group Overview We have an immediate need for a Senior Civil Engineer for our Mineola, Long Island Office. Come join our team! We are looking to build services and capabilities through the growth of our key asset- our staff. Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. You can become part of an organization that has a strong track record and is looking to strengthen relationships and capabilities to continue being a trusted resource for our clients in the public and private sector. We are proud to be known as an “Integrated Construction, Design and Technology Solutions” firm and we have delivered on that label time and again. Recently, Global Infrastructure Solutions Inc. (GISI), the parent company of The LiRo Group and Hill International, Inc. consolidated a portion of the highly experienced staff of both LiRo and Hill in the Northeast to create a larger, more efficient, and cost-effective team to serve clients. LiRo-Hill is a 1100-person firm with offices in NYC, Long Island, Buffalo, Rochester, Boston and Metro Park, NJ. Responsibilities • Perform a wide range of civil engineering analysis and design tasks related to: zoning analysis, site planning, site stormwater management, utility planning and layout, parking analysis and layout, vehicle maneuvering analysis, pavement and grading design, • Lead coordination and presentation of submissions with local utilities, municipalities, environmental agencies, and town planning boards, • Perform site investigations to observe and document existing conditions, • Complete and review design calculations; assist in the preparation of drawings and specifications, • Supervise the development of project plans, design calculations, specifications and lead the coordination with other design disciplines as required to deliver high quality engineering services, • Provide responses and solutions to issues during the construction administration phase of projects, • Utilize a broad assortment of technical and project management skills on projects that range from small site restorations to large scale new construction, • Engage with existing clients and pursue new clients to support growth of the business in the region across LiRo’s service lines, • Assist in the preparation of technical content for proposals for engineering services, • Attend industry and business development functions as a representative of the firm, • Mentor and develop junior engineering staff Qualifications • Bachelor of Science in Civil Engineering, • 7+ years’ experience in Civil Engineering, • NY PE required, • Ability to provide guidance to junior level engineers, • Understanding and application of local code requirements, • Experience in using various structural analysis software, • Strong written and verbal communication skills, • Ability to multitask and consistently meet deadlines, • AutoCAD and Civil 3D experience a requirement. Our Culture: We believe in the power of collaboration. We work hard to build a corporate culture that empowers all our employees to freely share their ideas, know their presence, and contributions are truly valued, fostering a climate where our employees are enabled to maximize their full potential. • We offer a comprehensive benefits package and a positive work environment, • Compensation: Minimum: $120,000; Maximum: $165,000. The range provided is the salary that the Firm in good faith believes at the time of this posting is willing to pay. Exact compensation will be determined on the individual candidate’s qualifications and location., • The selected candidate must be authorized to work in the United States; Visa sponsorship is not available for this role., • Please visit our website for all of our career opportunities at ___ #ID22 #ZR22 PIeb696062bb58-37820-33502547

Job DescriptionBenefits: • 401(k) matching, • Competitive salary, • Free uniforms, • Health insurance, • Develop detailed technical drawings and specifications for retail window displays and pop ups., • Ensure that all project builds are designed with Health and Safety at the forefront of your mind., • Providing Build Drawings and CNC files., • Liaising with Project Managers on project requirements and deadlines.- Work closely with the Production Team to ensure that designs can be efficiently and accurately produced. • Conduct regular quality checks on prototypes and final products to verify accuracy and adherence to design specifications., • Participate in meetings with clients to present technical drawings and discuss project requirements. • Work closely with the design team whilst designing a project for a client. Ensuring that what is designed is achievable in project guidelines, budgets and timelines - whilst also thinking about whats best for the client., • Identify opportunities to streamline processes, improve efficiency, and enhance the overall quality of drafting work., • Proactively seek feedback and implement best practices to support ongoing learning and professional development.Qualifications: • 5+ years of experience in technical drafting for retail window displays and pop ups., • Must use SolidWorks or Inventor, • Proficiency in CAD software such as SolidWorks or Rhino., • Strong understanding of manufacturing processes and materials. • Excellent management skills with the ability to prioritize tasks and meet deadlines., • Detail-oriented mindset with a focus on quality assurance and continuous improvement.- Strong communication and interpersonal skills to collaborate effectively with cross-functional teams. • Ability to problem solve and troubleshoot technical issues as they arise., • Knowledge of health and safety regulations in the retail industry. If you have a passion for creative design and a strong technical background, we invite you to apply for this exciting opportunity to lead a dynamic team in designing innovative retail displays.

Job Description Position Description: Seeking a motivated, intelligent and hard-working individual to Develop and maintain quality and regulatory compliance in Genadynes' processes. Individual will ensure compliance with ISO 13485 and MDSAP requirements are maintained. Specific Responsibilities : Ensure the quality and processes are practiced and maintained. Compile documents required for audits. Create and maintain product technical files. Initiate corrective and preventive actions for non-conformities. Maintain/calibrate the accuracy of all testing equipment. Conduct risk assessments of medical devices and processes. Maintaining the effectiveness of quality control system and non-conforming materials control system. Discuss and solve quality problems with vendors. Investigate problems and make improvement on current processes. Develop/design effective test methods. Facilitate software design and development for medical devices. Performance testing and reporting on software, hardware and the compatibility for all accessories. Perform risk assessments for medical devices and accessories. Development and prototyping of new products with existing or new vendors. Abilities: Familiar with FDA CFR 820, ISO 134850, SOPs regulations. Extreme attention to details. Ability to think outside the box with excellent problem solving abilities. Excellent interpersonal, communication, and writing skills. Highly organized. Excellent computational skills. Knowledge of European regulations is a plus. Knowledge of common medical materials (silicone, polyurethane, etc.) Knowledge of electrical circuits and basic programming. Knowledge of C/C++ is a plus. Maintain MDD/MDR EN ISO Experiences: Regulatory compliance. Quality management. Cross functional team management. Quality assurance Requirements: Bachelor degree in mechanical, electrical, material, biomedical engineering or relative field. (Master degree preferred.) Benefits: Medical, Dental, Vision, PTO, 401K, Legal Services, FSA, Life Insurance Salary Range: $68,000 - $72,000/Annual Powered by JazzHR oSPuR7OKHc

Job Description Wego Chemical Group is a global distributor and sourcing partner of chemicals and ingredients. We are an established player in the global specialty chemical markets, providing end-use manufacturers across industries in North America, LATAM, & EMEA with end-to-end supply chain solutions from across the globe. Our team has been operating for over 45 years, serving customers in over 25 countries, with 200+ professionals in 9 offices strategically located across 4 continents. Proudly family-owned and operated, Wego is led by two generations of leadership who bring passion, vision, and a long-term commitment to our partners' success. Job Summary The Oracle Cloud SCM Solutions Architect will spearhead the design, execution, and upkeep of Oracle Fusion Supply Chain Management solutions tailored to our organization's evolving needs. This role demands extensive knowledge of Oracle Fusion Supply Chain modules coupled with a comprehensive understanding of Oracle SaaS components. Responsibilities • Solution Engineering: Craft comprehensive solutions leveraging Oracle Fusion modules to address business challenges, ensuring adherence to industry-leading practices and benchmarks., • Technical Guidance: Serve as the technical authority throughout project lifecycles, from initial requirement analysis to final implementation and ongoing support., • System Adaptation: Tailor Oracle Fusion applications to meet specific business needs, utilizing both native functionalities and custom developments as appropriate., • Systems Interfacing: Architect and implement connectivity solutions to bridge Oracle Fusion with diverse enterprise platforms., • Legacy Data Transition: Orchestrate the migration of data from existing systems to Oracle Fusion, guaranteeing data precision, consistency, and thoroughness., • System Enhancement: Diagnose performance issues and fine-tune Oracle Fusion Supply Chain Management applications to boost efficiency and scalability., • Technical Writing: Develop and maintain comprehensive technical documentation, encompassing solution blueprints, setup guides, and system architecture schematics., • Team Synergy: Work closely with multidisciplinary teams, including business partners, development staff, and infrastructure experts, to deliver top-tier solutions within prescribed timelines and budgets., • Bachelor’s degree in computer science, Information Technology, or a related discipline., • 5+ year experience with Oracle Fusion Supply Chain modules: Costing, Inventory Management, Order Management, Procurement, etc. as well as process knowledge across planning, services and finance areas., • Demonstrated track record in architecting and deploying Oracle Fusion solutions within complex enterprise settings and an overall knowledge of Oracle ERP., • Proficient understanding of Oracle SaaS components, particularly Oracle Integration Cloud., • Exceptional verbal and written communication skills, with the ability to convey complex technical concepts to non-technical audiences., • Strong analytical and problem-solving capabilities, coupled with meticulous attention to detail., • Ability to analyze requirements from a cross- functional perspective and design optimal solutions.

Job Description We are developing an advanced artificial-intelligence platform that helps utilities and industries optimize their power generation assets. We are seeking a Lead Engineer for this AI & Industrial Data Platform who will architect and implement the next-generation data and analytics layer connecting power-plant operations with intelligent, real-time efficiency and maintenance insights. This is a hands-on technical role that bridges industrial control systems (SCADA/PLC/IoT) with cloud-based data science and AI/ML pipelines. seeking a Lead Electrical/Controls Engineer For AI & Industrial Data Platform to become an integral part of our team! You will assist in the research, design and development of this AI platform. Responsibilities: Design and develop the AI data platform to ingest and process real-time sensor data from power plants and industrial assets (boilers, turbines, compressors, pumps, etc.). Build data ingestion and edge connectivity layers using OPC-UA, Modbus, MQTT, and historian APIs (e.g., OSIsoft PI). Architect and deploy time-series databases, data lakes, and feature stores for continuous analytics. Collaborate with process engineers to develop AI/ML models for: Plant efficiency optimization (heat rate, fuel-to-power ratio) Predictive maintenance and anomaly detection Load forecasting and renewable integration Develop APIs and visualization dashboards (using Python, FastAPI, or similar frameworks) for operations and management teams. Implement MLOps pipelines for training, validation, deployment, and continuous improvement of AI models. Ensure data security, reliability, and compliance (industrial cybersecurity best practices, OT/IT segregation). Lead and mentor a small team of data scientists, IoT engineers, and software developers. Qualifications: Bachelor’s or Master’s degree in Electrical Engineering / Computer Science, or related field. 8+ years of experience in industrial automation, power plant controls and operations, energy analytics, or AI/ML system development. Deep understanding of power plant systems (thermal, combined cycle, or renewable). Strong hands-on experience with: Industrial protocols: OPC-UA, Modbus, MQTT, DNP3 IoT & edge frameworks: Node-RED, Azure IoT Edge, AWS IoT Greengrass, or Ignition SCADA scripting Time-series data & databases: InfluxDB, TimescaleDB, PI System, or historian data AI/ML frameworks: TensorFlow, PyTorch, Scikit-learn, XGBoost Programming: Python (must), SQL, optional C/C++ for device interfaces Cloud & MLOps: AWS, Azure, or GCP; Docker, Kubernetes, MLflow, Airflow Proven track record in deploying AI models into production in industrial or energy environments. Excellent collaboration and communication skills with cross-functional technical and operations teams.

Job Description iRocket (Innovative Rocket Technologies Inc.) is pioneering fully autonomous, fully reusable small launch vehicles to enable responsive, lower-cost access to space. We combine advanced propulsion, reuse, and sustainable propellant technologies to push the frontier of commercial space. The Role: We are seeking a Propulsion Engineer to join our propulsion team and contribute to the design, development, testing, and qualification of propulsion systems for our launch vehicles. You will work closely with integration, test, design, and manufacturing teams to bring propulsion systems from concept to flight readiness. • Support design, development, and testing of propulsion systems (e.g. liquid rocket engines, pressure-fed or pump-fed systems, component-level systems), • Participate in test campaigns, including planning, instrumentation, execution, and post-test analysis, • Develop and maintain test procedures, control sequences, and configuration files for propulsion testing, • Troubleshoot issues in propulsion subsystems (fluid, mechanical, thermal) during testing and integration, • Collaborate with cross-functional teams (mechanical, thermal, controls, electronics, systems) to ensure subsystem integration, • Perform calculations and simulations to support sizing, performance prediction, and optimization, • Support Test Readiness Reviews (TRRs), Failure Review Boards, and design reviews, • Implement continuous improvements to increase test efficiency, safety, and reliability, • Bachelor’s degree in Aerospace Engineering, Mechanical Engineering, or a related discipline, • 2+ years of experience in propulsion, test, or fluid/thermal systems development and testing, • Familiarity with liquid or hybrid rocket engine systems, fluid dynamics, thermodynamics, and heat transfer, • Experience with instrumentation, sensors, data acquisition, control systems, • Proficiency with scripting or programming (Python, MATLAB, etc.), • Ability to read and interpret engineering drawings, P&IDs, and technical specifications, • Strong problem-solving, data analysis, and communication skills, • Ability to work in multidisciplinary teams and in a fast-paced, evolving environment, • Experience with cryogenic fluids, high-pressure systems, or oxidizer/fuel systems, • Experience with CAD, simulation tools (CFD, thermodynamics, structural), or propulsion modeling, • Familiarity with propulsion test stands, plumbing, valve systems, or turbomachinery, • Experience in space, launch vehicle, or high-reliability systems, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job DescriptionWe are looking for a skilled Technical Engineer to join our team in Westbury, New York. This is a Contract-to-permanent position that offers an excellent opportunity to contribute to innovative projects involving structured cabling, audio-visual systems, and sound masking solutions. If you are passionate about technology and thrive in a dynamic environment, we encourage you to apply. Responsibilities: • Develop and submit detailed proposals for structured cabling, audio-visual systems, and sound masking projects using Blue Beam software., • Collaborate with cross-functional teams to ensure seamless integration of electronic components into project designs., • Manage and maintain Active Directory environments to support organizational needs., • Configure and troubleshoot Microsoft Exchange for optimal communication and data management., • Implement and oversee Palo Alto Firewall configurations to ensure network security., • Analyze system requirements and recommend appropriate integration solutions., • Provide technical support for hardware and software issues, ensuring timely resolution., • Conduct system testing and validation to guarantee reliability and performance., • Document all technical procedures and project progress for future reference.• Proficiency in Blue Beam software for proposal preparation and project design., • Solid understanding of Active Directory management and configuration., • Experience working with integration and electronic components in technical projects., • Familiarity with Microsoft Exchange setup and troubleshooting., • Hands-on experience with Palo Alto Firewall installation and maintenance., • Strong analytical skills to assess system requirements and propose solutions., • Excellent problem-solving abilities and attention to detail., • Effective communication skills to collaborate with team members and stakeholders.

Job Description We are currently seeking a qualified Fire Alarm Engineer/Inspector to join our team. This position is responsible for the design, review, and inspection of fire alarm systems, ensuring compliance with applicable codes and standards. The ideal candidate will take a hands-on approach in conducting pre-inspections, developing detailed punch lists, attending FDNY inspections, and supporting seamless project approval. Key Responsibilities: * Design and review fire alarm system layouts and specifications. * Conduct pre-inspections and develop punch lists identifying deficiencies in various fire alarm systems prior to FDNY inspection. * Represent the company during FDNY inspections and resolve any issues raised by the inspector. * Coordinate with clients and project stakeholders to schedule inspections and discuss system requirements. * Provide technical support and collaborate with internal team members as needed. Qualifications and Requirements: * Strong knowledge of the 2022 NYC Building Code. * Hands-on experience in fire alarm system design and engineering (preferred). * Proficiency in AutoCAD (ACAD) for preparing system plans (preferred). * Excellent verbal and written communication skills. * Strong organizational and time management abilities. * Ability to work independently with minimal supervision. * Physically capable of performing job-related tasks. * Flexible schedule, including availability for overtime as needed. * Proficiency in Microsoft Word, Excel, Outlook, and general computer literacy. * Collaborative mindset and team-oriented attitude. Benefits: * 401(k) retirement plan * Comprehensive health insurance * Paid time off * Additional retirement savings plan Work Schedule: * 8, 10, or 12-hour shifts * Monday to Friday * Occasional nights and weekends as needed Equal Opportunity Statement: We are proud to be an Equal Opportunity Employer. We value diversity and are committed to creating an inclusive environment for all employees. Company DescriptionW3Global was established in 2006 in Fremont, CA with a vision: simplify the recruiting process and develop an industry-disrupting platform to connect candidates with clients. Our cutting-edge Applicant Tracking System enables us to find the right person for the right job, creating value for job seekers and employers. While W3Global initially focused on IT staffing, we have expanded the business to serve many other industries, including accounting and finance, legal, engineering, human resources, government and more. We’re proud of the investments we’ve made in our team, having grown from four to 1000 employees and evolving into one of the leading recruitment and staffing solution providers in the industry. Our recruiters and account managers are passionate about connecting qualified professionals with the right positions in small, medium, and large companies. Our Services W3Global understands the natural ups and downs of an organization’s staffing needs. We are continuously adapting to industry and economic changes to find the right candidates. We specialize in placing permanent, direct, contract, and temporary positions for companies of any size. Our recruiting services include sourcing, recruiting, screening, interview management, salary negotiations, training, and onboarding. We are committed to helping organizations redefine their recruitment process by delivering our SaaS-based proprietary application tracking system software. Our Expertise W3Global has been delivering staffing solutions for nearly two decades; we know which recruiting strategies work best. Our expert team is committed to developing a customized solution to fit your company’s unique needs. As a W3Global client, you’ll also receive personalized assistance from a seasoned team of staffing specialists. We are committed to providing both technical support and industry expertise to simplify the hiring process. We know that your time matters. W3Global will help you streamline the hiring process, getting it done and getting it right.W3Global was established in 2006 in Fremont, CA with a vision: simplify the recruiting process and develop an industry-disrupting platform to connect candidates with clients. Our cutting-edge Applicant Tracking System enables us to find the right person for the right job, creating value for job seekers and employers. While W3Global initially focused on IT staffing, we have expanded the business to serve many other industries, including accounting and finance, legal, engineering, human resources, government and more.\r\n\r\nWe’re proud of the investments we’ve made in our team, having grown from four to 1000 employees and evolving into one of the leading recruitment and staffing solution providers in the industry. Our recruiters and account managers are passionate about connecting qualified professionals with the right positions in small, medium, and large companies.\r\n\r\nOur Services\r\nW3Global understands the natural ups and downs of an organization’s staffing needs. We are continuously adapting to industry and economic changes to find the right candidates.\r\n\r\nWe specialize in placing permanent, direct, contract, and temporary positions for companies of any size. Our recruiting services include sourcing, recruiting, screening, interview management, salary negotiations, training, and onboarding.\r\n\r\nWe are committed to helping organizations redefine their recruitment process by delivering our SaaS-based proprietary application tracking system software.\r\n\r\nOur Expertise\r\nW3Global has been delivering staffing solutions for nearly two decades; we know which recruiting strategies work best. Our expert team is committed to developing a customized solution to fit your company’s unique needs.\r\n\r\nAs a W3Global client, you’ll also receive personalized assistance from a seasoned team of staffing specialists. We are committed to providing both technical support and industry expertise to simplify the hiring process. We know that your time matters. W3Global will help you streamline the hiring process, getting it done and getting it right.

Job Description Quality Engineer II - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding good quality people, which is why we will provide a screening to see if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The Quality Engineer II position will work closely to solve quality problems and support new development programs, legacy programs, and conduct internal audits. SUPERVISORY RESPONSIBILITIES • This job has no supervisory responsibilities. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Working closely with Engineering to ensure that designs meet applicable quality requirements., • Plan and perform internal quality audits and execute action items., • Lead quality initiatives to reduce scrap and rework by developing and facilitating cross-functional teams., • Conducting quality investigations., • Be an active participant in the material review board., • Provide quality function support by working closely with Sales, Engineering, and Manufacturing to manage customer relations, expectations, needs and satisfaction., • Independently drive and direct actions with departmental groups to maintain MRB and RMA issues., • Drive key quality performance metrics: DPPM, OTD, Cost of Quality, Customer Scorecards, Internal Audit Risk and Effectiveness, Supplier Performance, Contract Review., • Source inspection liaison, • Travel to customer and supplier locations as required. SECONDARY DUTIES AND RESPONSIBILITIES • Supporting new product introduction programs by creating and maintaining the following, as required:, • Production Part Approval Process, • Advanced Product Quality Planning, • Zero Defects Program, • Control Plans, • Inspection Plans, • Inspection Reports, • First Article Inspection Reports, • Supplier Approval and Development, • Attend NPI meetings, including, • Preliminary Design Reviews, • Critical Design Reviews, • Make Buy Reviews, • Monitor the Progress of NPI programs through manufacturing and into production, • Conduct purchase order reviews related to NPI and production programs, • Interact with customers on NPI and production programs, • Engage in problem-solving with engineering, operations, and supply chain on NPI and production programs, • Support shipments of NPI and production programs, • Conduct internal audits, • Become a designated quality representative when required by the customer QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Knowledge of aerospace quality requirements and specifications., • Proven track record of partnering with manufacturing and engineering, • Experience with root cause analysis and corrective action. Experience with formal quality and operations systems., • Capable of reviewing and interpreting drawings, contracts / POs, and applicable processing standards., • Skilled at performing First Article inspections., • Proficiency with MS Office applications: Word, Excel, PowerPoint, and Outlook., • An understanding of the use and application of statistics and SPC., • Six Sigma preferred EDUCATION AND/OR EXPERIENCE • Bachelor’s Degree in Engineering required, • 9 to 10 plus years working in the aerospace and or automotive industry in a quality, engineering, or manufacturing capacity., • Previous experience in a high-mix, low-volume job shop, • Ability to manage priorities and meet deadlines in a fast-paced environment, • Working knowledge of ISO 9001:2015 and AS9100D Quality Management System processes., • Due to ITAR restrictions, an export license may be required OTHER SKILLS • Computer Literacy in Excel, Minitab, CAD, and Visio, • Advanced problem-solving and advanced data analysis techniques, • Knowledge in and experience in 8D problem-solving techniques, SPC, and statistical analysis PHYSICAL DEMANDS • Continuous periods of sitting at a desk and working on a computer and phone., • Prolonged time standing., • Must be able to occasionally lift 25 pounds at a time., • Frequently required to stand, walk, and reach with arms and hands. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $100,000 to $120,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job Description Power-Flo Technologies is committed to being the premier provider of supplies, services, and solutions to the electrical, industrial, mechanical, and automation industries. We are looking for you to join our collaborative team as a Design Engineer. This is a full-time, on-site role. Primary Functions Responsible for design of electrical panels and schematics to meet customer requirements. Provide panel jobs quotes and estimates. Act as project management on panel jobs. Assist with customer technical support. Post-sales support on core products. Salary commensurate with experience (Range from $45,000 - $145,000 annually) Benefits Package • Medical, Dental, Vision, • PTO Program and Paid Holidays, • 401K Design Engineer Essential Responsibilities • Review engineered contract drawings and specifications for the design of electrical control panels., • Design and layout of electrical panels using AutoCAD., • Ensure that all panels are being designed and constructed to UL Standards., • Creating Bill of Materials for the sales engineer team., • Create testing procedures for specific projects to be used by shop personnel., • Determine parameters to program variable frequency drives and soft starters., • 3 years+ experience in the design of electrical system preferred, • Ability to use AutoCAD for electrical design work., • Hold a degree in the engineering field., • Some Minor Lifting and Moving of Parts and Equipment We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description Role snapshot • Engineer and deliver safe, code-compliant commercial electrical systems, • Apply expertise across 120/208/240/480 voltage systems, • Convert electrical schematics into high-quality installations, • Diagnose and repair issues to maintain uptime and safety What you’ll handle, • Plan layouts and support conduit pulling for efficient runs, • Verify compliance with the National Electrical Code (NEC), • Coordinate installation activities and perform commercial-grade repairs, • Document work, updates, and as-built changes Must-have qualifications, • Engineering Degree, • Electrical Schematics, • Commercial Electrical Expertise, • Electrical Installation, • Electrical Repair, • 120/208/240/480 Voltage Systems, • National Electrical Code (NEC), • Adhere to EHS standards and site protocols

Job DescriptionTop Job Located in Freeport, NY Salary: $25.00 Job Functions: • Assist in problem solving with company software., • Preventative Maintenance Management: Schedule and log preventative maintenance tasks, order required fluids and parts, and maintain related spreadsheets. Ensure upkeep of cutting fluids and gear-cutting hob maintenance., • Tooling and Consumables Management: Monitor stock of drills, endmills, and other common tools. Implement and sustain Kanban stocking methods to ensure availability and reduce downtime., • Job Entry and Administrative Support: Create jobs in ERP, prepare travelers, prints, and inspection reports, and issue order acknowledgments using established templates. Maintain organized Excel spreadsheets and support company software problem solving., • Purchase Order and Vendor Tracking: Track delivery status for outsourced components and outside services, coordinating with vendors to ensure timely completion., • Shop Scheduling and Tasking: Assist with basic scheduling by physically moving jobs to designated work centers and helping assign weekend crew tasks to maintain production flow., • Fixture and Process Support: Provide assistance with simple fixture designs and collaborate with engineering on straightforward process improvements., • Material Management: Support inventory accuracy through periodic counts, audits, and reconciliation of materials., • Create and issue Purchase Orders for third party services and consumable goods Knowledge and Skills Required: • Strong computer proficiency, especially in Microsoft Excel, • Ability to read and follow written and verbal instructions with accuracy., • Strong organizational skills with attention to detail in recordkeeping, logs, and inventory management., • Effective communication and interpersonal skills for cross‑department collaboration., • Willingness to learn new systems and proactively solve problems in a dynamic environment. Preferred knowledge and skills but not required • Familiarity with Lean Manufacturing and Six Sigma practices, • Experience with ERP systems like Jobboss and Prophet 21, • Previous experience in a machine shop supervisory role, • Certification in machining or manufacturing technology ##2127OS Express Office: Farmingdale 565 Broadhollow Road Suite 9E Farmingdale, NY 11735

Job Summary: We are seeking a seasoned Full Stack Developer to work along-side, a team of software engineers, in a collaborative Agile environment to develop and maintain new and existing software applications. Core Duties and Responsibilities: • Collaborate with cross-functional teams to design, develop, and maintain software applications, • Consult with team leaders, managers, and stakeholders to gather and review requirements, and create functional specifications., • Write clean, efficient, and maintainable code, • Utilize software engineering patterns, practices, and guidelines to deliver high quality software solutions consistently and efficiently, • Participate in software development related activities., • Troubleshoot and debug applications., • Stay up to date with software engineering trends and emerging technologies., • Participate in peer-reviews of solution designs and related code., • Consult and collaborate with business units to develop software solutions to meet business goals, solve problems or refine processes., • Work to develop projects and enhancements making sure they are delivered with the expected functionality and within project timelines., • Promote new ideas and make sound technical decisions., • Perform other duties as assigned. Qualifications: • Minimum of 5 years software engineering experience required, • Minimum of 5 years working hands-on in Agile software development highly preferred, ideally Scrum style Agile development model., • Agile project management methodology experience, • Ability to establish API Connections both to pull data and push data, • Advanced knowledge of Asp.net, C#, HTML, CSS, JavaScript, and SQL, • Knowledge of how to debug windows apps and web apps, • Knowledge of Visual Studio, SSMS, Git and SOLID design principles, • Extensive knowledge of engineering best practices and principles as well as understanding computational & scientific methods of problem solving, • Excellent analytical skills including the ability to analyze, troubleshoot, process, change and improve design, process, and the products, • Strong presentation, written and verbal skills., • Must be able to commute to our Jericho HQ 4x per week The expected salary range for this position is $90,000-$110,000. The actual compensation will be determined by experience and other factors permitted by the law. California residents – please see our California Privacy Rights Notice for Job Applicants

Job DescriptionBenefits: • 401(k), • Bonus based on performance, • Dental insurance, • Health insurance, • Paid time off Location: Long Island, New York Company: Harlequin Design New York Inc. About Us: Harlequin Design New York Inc. is a leading design and fabrication agency specializing in innovative solutions across various industries. We pride ourselves on our commitment to quality, creativity, and collaboration, creating exceptional designs that exceed client expectations. Job Description: We are seeking a talented SolidWorks Engineer to join our dynamic team. The ideal candidate will have a strong background in 3D modeling and engineering design, with a passion for creating precise and functional products. You will work closely with our design and fabrication teams to bring concepts to life and ensure the highest standards of quality and performance. Key Responsibilities: • Develop and modify 3D models and technical drawings using SolidWorks., • Collaborate with engineers and designers to translate concepts into detailed designs., • Conduct feasibility studies and simulations to optimize designs., • Prepare and maintain documentation related to design specifications and revisions., • Assist in prototyping and testing to validate designs and improve performance., • Provide technical support during the fabrication process and address any design-related issues., • Stay updated on industry trends and advancements in CAD technologies.Qualifications:, • Bachelors degree in Mechanical Engineering, Industrial Design, or a related field., • Proficiency in SolidWorks; additional CAD software knowledge is a plus., • Strong understanding of engineering principles, materials, and manufacturing processes., • Excellent problem-solving skills and attention to detail., • Ability to work collaboratively in a team-oriented environment., • Effective communication skills, both written and verbal.What We Offer:, • Competitive salary and benefits package., • Opportunities for professional development and career growth., • A creative and collaborative work environment., • The chance to work on diverse projects that make an impact.

Job Description Job Description Schivo Medical in Plainview, New York manufactures a diverse range of essential medical technology solutions. Working with us, you will be apart of the manufacturing process of a vast array of different products including robotic surgery instruments medical devices that treat chronic disease in new ways so people can live better and longer. As an employee of Schivo Medical, you will tackle a wide array of problems, including some of the world’s greatest medical challenges. You will work with a team of professionals that are committed to helping create parts that save lives and help assist you with a fulfilling and rewarding career. Manufacturing Engineer job summary: A Manufacturing Engineer is responsible for designing, implementing, and reviewing the procedures and equipment involved in the manufacturing process. Their duties include researching automation techniques, testing new systems for efficiency and planning factory layouts to optimize production. Lead or assist in the cost estimating process. Manufacturing Engineer Necessary Education, Skills, and Competencies (including licensing and certifications): • 3 years of work experience as a manufacturing engineer or similar role needed, • Knowledge of manufacturing processes, fabrication methods and tool design, • Familiarity with manufacturing equipment and quality assurance techniques, • Commitment to health and safety standards and environmental regulations, • Well-versed in relevant software (e.g. CAD, MS Office), • Project management skills, • Problem-solving ability, • Teamwork skills, • Degree in Mechanical Engineering or related field(CNC Machining), • Green belt certificate a plus, • Working knowledge with continuous improvement process Manufacturing Engineer Essential Duties and Responsibilities: • Evaluate manufacturing processes based on quality criteria, such as efficiency and speed., • Provide cost estimations for new and existing projects., • Create, test, and implement manufacturing process., • Study production and machine requirements, • Develop and test effective automated and manual systems., • Design and install equipment., • Implement manufacturing processes that result in high-quality products., • Organize and manage manufacturing workflows and resources., • Optimize facility layouts, production lines, machine operations and network performance., • Resolve issues and delays in production., • Find ways to reduce costs and maximize quality., • Train staff in new and existing processes, • Collaborate with other engineers, contractors, and suppliers., • Ensure that manufacturing procedures follow safety and environmental regulations., • Upgrade systems and processes with new technology Benefits: • Employee referral, • 401(k), • 401(k) matching, • Dental insurance, • Vision insurance, • Life Insurance, • Employee assistance program, • Health insurance, • Paid time off, • Referral program * Schivo Medical is an Equal Opportunity Employer. All qualified applicants will receive employment consideration without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, genetic information, disability, or protected veteran status.

Job DescriptionDescription: Job Description: Responsible for the daily operation, maintenance, preventative maintenance and repairs of building plumbing, electrical, HVAC and all other building systems. Must have working knowledge of all building mechanical, electrical, HVAC, plumbing, life safety, and fire protection systems to ensure proper operations and be able to act upon any conditions that are out of the ordinary. Salary: $83,200.00/yr Availability: On Call 24/7 Essential Job Duties Under the Direction of the Director of Engineering and Operations: 1. Inspect building, grounds and equipment for unsafe or malfunctioning conditions., 2. Conduct, schedule and manage periodic general preventative maintenance on the mechanical, electrical, HVAC, and plumbing systems. This involves normal lubrication, adjustment, cleaning, replacement of consumable parts (such as filters, belts, indicator lights, etc.), and periodic testing of the equipment. These systems include, but are not limited to air handling units, re-circulating air systems, water pumping systems, cooling plant and its associated mechanics and all plumbing system components., 3. Assist with installation and modification of building equipment systems., 4. Respond quickly to emergency situations., 5. Perform and/or oversee electrical and plumbing repair and troubleshooting., 6. Perform and/or oversee mechanical projects., 7. Perform all assigned work to ensure the safety of the building's tenants and the continuous operation of the site., 8. Prioritize service calls and follow-up upon completion., 9. Troubleshoot, evaluate equipment/systems and recommend upgrades., 10. Coordinate maintenance efforts with outside contractors and technicians when work cannot be performed in-house. Coordinate contractor, tenant and management approvals for work orders that require the use of an outside contractor., 11. Order parts and supplies as required and maintain stock and inventory control., 12. Work with the Director of Engineering and Building Manager in planning and controlling annual and capital budgets., 13. Be responsive to tenant complaints in the areas of safety, plumbing, mechanical, electrical and environmental needs through both personal contact and work order systems., 14. Be familiar with and conform to all written operating procedures associated with site., 15. Ensure the cleanliness and appearance of all work areas., 16. Maintain a professional appearance and manner at all times, keep calm demeanor in emergency situations and act as a team member with all staff, 17. Perform other duties as assigned. Skills, Education and Experience: · Minimum of five (5) years of experience in building operations, engineering and equipment and systems maintenance · Ability to handle multiple projects and make decisions · Knowledge and understanding of blueprints · Strong customer service, communication and computer skills inclusive of payroll reporting · High School Diploma or Equivalent Other Job Requirements: · Available and on call 24/7 · Able to lift 50 pounds · Able to climb ladders A detailed scope-of-work will be discussed during the interview process. The requirements and duties described above may be modified or waived by the Company in its sole discretion without notice. Guardian Service Industries is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to, among other things, race, religion, color, national origin, sex, age, marital status, sexual orientation, gender identity, pregnancy, citizenship, status as a protected veteran, or status as a qualified individual with disability, or any other characteristic protected by applicable law. Guardian Service Industries is committed to integrity, excellence, and diversity among its employees. Requirements:

Atlantic Group is hiring a Project Administrative Assistant (Construction) in Nassau County, NY with our client, supporting large-scale infrastructure and building projects. You will manage submittals, RFIs, change orders, and DPW compliance while collaborating with project managers, subcontractors, and vendors to streamline approvals and reporting. This role is ideal for construction-focused administrative professionals looking to contribute to high-profile projects. Responsibilities as the Project Administrative Assistant: • Document Control: Manage Submittal Exchange and SharePoint to track and organize submittals, RFIs, COs, logs, and drawings., • Vendor & Subcontractor Approvals: Process approvals by checking references, verifying paperwork, drafting DPW letters, and submitting documentation., • Meeting & Reporting Support: Prepare agendas, logs, minutes, and monthly executive reports, distributing materials to all stakeholders., • Payment & Change Orders: Assist with monthly payment applications and assemble change orders for review and approval., • Education: Bachelor’s degree in Business Administration, Construction Management, or a related field preferred., • Experience: 4+ years in construction administration or project coordination, with DPW or large public works experience preferred., • Technical Skills: Proficient in Submittal Exchange, SharePoint, and Microsoft Office Suite, with experience in Procore, CMiC, or similar construction management software preferred., • Industry Knowledge: Strong understanding of construction documentation, approval workflows, and compliance requirements for public and private projects.

Job Description Candidates must live in the NYC area Summary: Parabit Systems, a well-established and rapidly expanding company in the security and self-service equipment industries, is currently seeking an experienced Firmware Engineer to participate in all aspects of the design and maintenance of hardware and firmware for its products. Candidate needs to demonstrate the ability to use appropriate development tools, compilers, and simulation. Must be capable of working within a team environment to plan, organize, execute and thoroughly document complex system designs. Test and debug skills are necessary; must understand interoperability of hardware and software. Must be able to manage and support multiple tasks on a consistent basis, while providing the highest level of service. Good verbal and writing skills are necessary. Full life-cycle software development; programming to include conceptual design, general coding, release to manufacturing testing, and quality assurance. Candidate needs to be able to produce final release software for manufacturing including associated documentation. Job Requirements: • A qualified candidate must have a BS or higher with 10+ years of relevant applied experience in Computer Science or Electrical Engineering. The ideal candidate will have a clear understanding of and hands-on experience with microprocessor firmware development., • Experience with Microcontroller competencies: Microchip, Nordic ARM cortex., • Experience with writing bootloaders for microprocessors on new and existing PCBAs., • Experience with writing embedded firmware in C for a Real-Time Operating System (RTOS)., • Experience with Bluetooth/NFC implementation., • Experience with network communication protocols (TCP/IP, UDP), • Experience with common communication protocols (I2C, SPI, RS485/RS232 and USB), • Experience with Microchip's Tools - MPLAB / MPLAB X / Harmony, • Experience developing embedded / IoT device software / firmware., • Knowledge and experience with analog, digital and embedded systems design, development, test engineering, and manufacturing., • Ability to read hardware block diagrams, schematics, and wiring diagrams., • Must be capable of thoroughly documenting complex system designs. Benefits: • Medical, • Dental, • Vision, • 401K, • Group Life All employment candidates must pass: a NON-DOT Drug screening, Criminal and Credit Background Check and a Driver License Check prior to employment.

Job Description iRocket (Innovative Rocket Technologies Inc.) is pioneering fully autonomous, fully reusable small launch vehicles for responsive access to space. We leverage cutting-edge propulsion, reuse, and sustainable propellant technologies to make launch more frequent, lower cost, and eco-friendly. We are headquartered in New Hyde Park, NY. The Role As a Machining & Manufacturing Engineer at iRocket, you will own the development, optimization, and scaling of high-precision manufacturing processes for rocket hardware. You will work cross-functionally with design, test, supply chain, and quality teams to mature processes from prototype through production. You will report to the Senior Manager of Manufacturing Engineering. • Develop, validate, and refine machining processes (CNC turning, milling, EDM, grinding, etc.) for rocket components, • Collaborate with design engineers to ensure manufacturability, offer design for manufacturing (DFM) feedback, and propose design changes where beneficial, • Create and maintain manufacturing BOMs, process flows, work instructions, and SOPs, • Support installation, calibration, qualification, and commissioning of new machines and tooling, • Lead root cause analysis (RCA) for production issues and drive corrective and preventive actions, • Implement process controls, error-proofing, statistical monitoring, and quality gates, • Participate in manufacturability reviews and design reviews to provide input from a manufacturing perspective, • Document and drive continuous improvement in process maturity, standardization, and scaling, • Support aerospace / defense compliance efforts (e.g. AS9100, aerospace quality standards), • Occasionally support mission-critical deadlines which may require non-standard hours Requirements • Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, or a related discipline, • 3+ years of experience in machining / manufacturing engineering in aerospace, defense, or precision industries, • Strong knowledge of GD&T, tolerancing, fixtures, tooling, materials, machining best practices, • Hands-on experience developing machining processes, tooling, fixturing, • Proficiency in reading engineering drawings, specifications, and technical documentation, • Ability to work cross-functionally, strong problem solving, and data analysis skills, • Excellent communication skills (verbal and written), • Master’s degree in Mechanical or Manufacturing Engineering, • Experience with aerospace quality systems (AS9100, NADCAP, etc.), • Familiarity with additive manufacturing, welding, exotic materials, or hybrid manufacturing methods, • Experience with lean manufacturing, continuous improvement methodologies (Six Sigma, Kaizen), • Proficiency in CAD/CAM or manufacturing software (e.g. NX, SolidWorks, Mastercam, etc.), • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description iRocket is developing fully autonomous, fully reusable small launch vehicles to provide responsive, cost-effective access to space. Our mission is to catalyze a new era of space exploration through innovation in propulsion, structures, and sustainable launch systems. The Role: We are seeking a Mechanical Engineer to contribute to the design, development, and transition of mechanical components and systems from development through production. You’ll partner with propulsion, manufacturing, integration, and test teams to help deliver high-performance, reliable rocket hardware. • Act as Responsible Engineer for key subsystems or components (e.g., valves, mechanical assemblies), • Advance design of parts and assemblies: create CAD models, drawings, and associated documentation, • Perform mechanical analyses, calculations, and design iterations to meet performance, mass, and reliability targets, • Collaborate with manufacturing teams to ensure designs are manufacturable, and iterate designs based on feedback, • Support fabrication, post-processing, inspection, and tolerance verification of parts, • Assist with integration, assembly, and test of mechanical and propulsion subsystems, • Create schematics, document design and manufacturing processes, and maintain records, • Participate in test campaigns, support troubleshooting, and analyze results, • Communicate progress, issues, and tradeoffs clearly across cross-functional teams, • Ensure safe practices and adherence to PPE and safety standards in lab, shop, and test areas Requirements • Bachelor’s degree in Mechanical Engineering or a related engineering discipline, • 3+ years of experience in mechanical design, development, fabrication, assembly, or test, • Proficiency in CAD, • Knowledge of GD&T, tolerance design, part and assembly drawings, • Strong problem solving, analytical thinking, and collaboration skills, • Excellent written and verbal communication skills, • Ability to manage multiple tasks in a fast-paced environment, • Experience in aerospace, propulsion, or high-reliability systems, • Hands-on engineering background (design to bench to manufacturing), • Experience with simulation or analysis tools (e.g. ANSYS, FEA), • Experience scripting or using tools such as MATLAB or Python, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job DescriptionDescription: The Glen Oaks Club, a premier club in Long Island, NY, is seeking a Full Time Facilities Maintenance Engineer. The Glen Oaks Club is known for providing its members with an exceptional and personalized experience. For nearly 100 years the Glen Oaks Club has been evolving to maintain its stature as a home away from home for its member families. Summary: The Facilities Maintenance Engineer is responsible for completing all maintenance and engineering duties and repairs all furniture and equipment, lighting, plumbing, HVAC, windows, flooring, locks, painting, and other aspects of the Clubhouse, company homes, and other structures Essential Duties and Responsibilities include the following; • Conduct routine inspections of facilities, including mechanical, electrical, plumbing, and structural components., • Perform preventive maintenance tasks on equipment and systems to ensure optimal performance and longevity., • Respond promptly to maintenance requests and resolve issues in a timely manner to minimize downtime and disruption to operations., • Troubleshoot and repair malfunctioning equipment, such as HVAC systems, plumbing fixtures, electrical circuits, and building automation controls., • Conduct regular checks on building systems, such as fire alarms, security systems, and emergency lighting, to ensure compliance with safety regulations., • Maintain accurate records of maintenance activities, including work orders, equipment logs, and inventory levels., • Coordinate with external contractors and vendors for specialized repairs or installations as needed., • Assist in the planning and execution of facility improvement projects, including renovations, upgrades, and expansions., • Monitor and maintain inventory levels of supplies and spare parts necessary for maintenance tasks., • Uphold standards of cleanliness and orderliness throughout the facilities, including common areas, restrooms, and utility rooms., • Adhere to safety protocols and regulations at all times, including the proper handling of hazardous materials and compliance with OSHA guidelines., • Provide support during emergencies, such as power outages, natural disasters, or other unforeseen events, to ensure the safety and security of building occupants., • Performs other duties assigned by Facilities Maintenance Manager. Requirements: Knowledge, Skills and Abilities: • Proven experience in facilities maintenance, including knowledge of HVAC, electrical, plumbing, and mechanical systems., • Strong troubleshooting skills and the ability to diagnose and resolve problems efficiently., • Proficiency in using hand and power tools for repair and maintenance tasks., • Excellent organizational skills and attention to detail for maintaining accurate records and inventory., • Ability to work independently with minimal supervision and prioritize tasks effectively., • Effective communication skills, both verbal and written, for interacting with colleagues, tenants, and external contractors., • Flexibility to work occasional evenings, weekends, or holidays for emergencies or special projects., • Knowledge of safety protocols and regulations, including OSHA standards, and a commitment to maintaining a safe work environment., • Physical stamina and dexterity to perform tasks that may require lifting, climbing, bending, and working in confined spaces. Glen Oaks Club offers a Generous Benefits Package including the following: • Group health coverage (medical, dental, & vision), • 401(k) plan, • Company provided life insurance, • Generous paid holiday schedule and paid vacation & sick days

Job Description Job description Golden Glow Architectural Studios is a professional design services corporation that provides building code and zoning analysis, per-construction services, tenant protection plans and drafting services in New York City. We provide our clients with in-depth analyses and conduct phased plan reviews from schematic design through construction documents. The ideal candidate will exhibit high standards, excellent communication skills, and have an ability to take initiative, and prioritize daily tasks. A strong ability to take charge and meet tight deadlines will ensure your success in this multi-faceted role. All are encouraged to apply. Responsibilities • Ensuring overall design intent of the project team is incorporated into the detailed documentation., • Monitors the design process from conceptual phase through construction administration, ensuring the design idea is consistent and properly executed., • Preparing Façade Repair Drawings, both individually and with the assistance of our drafting team, as scheduling and company workload requires, • Plans and develops projects of various sizes and works under supervision, • Investigates, evaluates, and recommends design solutions, prioritizes work, receives guidance on complex issues, • Assisting the owner with bid, negotiation, and award of contractors: (1) façade repair, sidewalk shed and adjacent property protection contractors; and (2) where we are contracted as the Construction Manager on non-LL11 projects., • Participates in construction administration by reviewing shop drawings and submittals, responding to RFI’s, working to solve construction issues, and performing site visits to assess general conformance with the design concept, • Strong drafting skills -able to self-perform and guide staff junior architects in the production of construction documents, • Familiarity with NYC agencies having jurisdiction – primarily DOB, FDNY, DOT, DPR and DCP, assist in building code and zoning reviews when needed., • Assists with marketing and business development activities, • Coordinating the work of junior professionals and technicians, • Consistently reviews work and communicate needs and concerns to project staff., • Bachelor's degree or equivalent experience, • Architecture registration required., • Strong interpersonal, customer service, writing, and communication skills., • Good understanding of construction, building codes and zoning, • Experience in architecture including project and construction documentation., • Ability to work on multiple, fast-paced projects and documents., • Experienced in Revit and AutoCAD software, • Architecture & Planning We offer a comprehensive benefits package that includes medical, dental, vision, FSA and 401(k). We are an equal opportunity employer.

Job Description The Chief Engineer is responsible for ensuring proper operations, maintenance, service and repair of all equipment, while supporting the Hilton and LMG, goals of guest satisfaction, cost control and profitability. He/she is also responsible for overseeing and participating in the Preventative Maintenance program, ensuring that all rooms and public space meet Hilton standards. Management level associates are expected to work as much of each workday as is necessary to complete their job responsibilities. Exempt managers must customarily and regular direct the work of at least 3 full-time associates or their equivalents. Primary duties must consist of administrative, executive, or professional tasks more than 50 percent of the time and job duties must also involve the use of discretion and independent judgement more than 50 percent of the time. Education & Experience • High School diploma or equivalent required. • At least 5 years of progressive experience in a hotel or a related field; or a 2-year college degree and 3 or more years of related experience; or a 4-year college degree and at least 2 years of related experience. • Supervisory experience required. • Current Certification as required by Federal, State or Local governing agents pertaining to trade requirements (i.e. HVAC, pool operation, electrical), property specific. • Current certification and licensing to operate and repair the hotels boilers and chillers as required by state, city, and local legislation. • Must have a valid driver's license for the applicable state. • Must be able to convey information and ideas clearly. • Must be able to evaluate and select among alternative courses of action quickly and accurately• Must work well in stressful, high pressure situations. • Must maintain composure and objectivity under pressure. • Must be effective in handling problems in the workplace, including anticipating, preventing, identifying and solving problems as necessary. • Must have the ability to assimilate complex information, data, etc. from disparate sources and consider, adjust or modify to meet the constraints of the particular need. • Must be effective at listening to, understanding, clarifying and resolving the concerns and issues raised by coworkers and guests. • Must be able to work with and understand financial information and data, and basic arithmetic functions. Job Duties & Functions • Assist with the operation, maintenance and repair of equipment. • Change out light bulbs; perform preventative maintenance for guest rooms to include: vinyl repair, touch up paint, minor furniture repair, tub caulking, tile repairs, etc. • Perform preventative maintenance for ice machines, refrigerators, kitchen equipment, laundry equipment, HVAC, guestrooms, meeting rooms, the swimming pool and hot tub. • Perform plumbing repair, laundry equipment repair, preventative maintenance on all exhaust fans and supply; monitor energy conservation; repair vacuum cleaners and any other small equipment upon request. • Immediately follow up on any alarms to determine the exact location and cause - determine emergency status and report to the Front Desk with findings. • Perform other tasks/jobs as assigned by the supervisor or manager. This job description is not intended to be all-inclusive, additional details will be specified by the General Manager. Management reserves the right to change this job description, job responsibilities, duties, and working hours as needs prevail. If requested in accordance with applicable law, the Company provides reasonable accommodation to known physical or mental limitations of an otherwise qualified associate with a disability to allow him/her to perform essential functions of the job unless the accommodation would impose an undue hardship on the Company. Levine Mgmt Group LLC is an at-will employer. This job description is a guideline and does not constitute a written or implied employment contract.

Job Description Responsibilities: Develop and execute advanced temperature control strategies for HVAC systems to ensure optimal comfort, energy efficiency, and system performance. Collaborate closely with project teams, mechanical engineers, and clients to understand project requirements and develop tailored temperature control solutions that align with project goals. Configure, program, and fine-tune Building Management Systems (BMS), Programmable Logic Controllers (PLC), and Direct Digital Controllers (DDC) to implement precise temperature control algorithms. Conduct thorough site assessments to evaluate existing temperature control systems, diagnose issues, and propose upgrades or improvements. Generate detailed schematics, wiring diagrams, and documentation for temperature control system installations, troubleshooting, and ongoing maintenance. Oversee the commissioning process by calibrating sensors, validating control sequences, and performing thorough testing to ensure accurate temperature regulation. Collaborate with installation teams and technicians during the implementation phase to ensure accurate execution of control strategies and equipment integration. Keep current with industry trends, emerging technologies, and best practices in temperature control and building automation. Qualifications: Bachelor’s degree in mechanical engineering, Electrical Engineering, or a related field. Advanced degrees are a plus. Extensive experience in HVAC temperature controls engineering, including a deep understanding of temperature control theory and application. Proficiency in programming languages and platforms used in temperature control systems. Demonstrated ability to design, troubleshoot, and optimize complex temperature control algorithms. In-depth knowledge of HVAC systems and components, including chillers, boilers, air handlers, and various temperature regulation devices. Familiarity with industry standards and codes related to temperature control. Ability and willingness to travel to project sites as required. Company Description* With a $ 250 Million Bonding Line, ACS is a Major Player in Government and Private Construction Contracts. • Job Stability to our Team Members is ensured by Dozens of Ongoing Contracts at all times in NYC 5 Boros ,L.I, Ct and the vicinity., • We are looking forward to expand our Team to take on challenging assignments as we embark on Major Expansion., • Our Associates are our Most Valued and Greatest Corporate Asset.We seek to maximize this Asset by assisting all our Associates ,in every which way, in realizing their Highest Professional Potential.* With a $ 250 Million Bonding Line, ACS is a Major Player in Government and Private Construction Contracts.\r\n\r\n* Job Stability to our Team Members is ensured by Dozens of Ongoing Contracts at all times in NYC 5 Boros ,L.I, Ct and the vicinity.\r\n\r\n* We are looking forward to expand our Team to take on challenging assignments as we embark on Major Expansion. \r\n\r\n* Our Associates are our Most Valued and Greatest Corporate Asset.We seek to maximize this Asset by assisting all our Associates ,in every which way, in realizing their Highest Professional Potential.

Job DescriptionSalary: Job Title: Quality Control Engineer Location: New York Employment Type: Full-Time Why Should You Join AEIS? At AEIS, were proud to serve as the quality backbone on some of New York Citys most vital infrastructure projects. We dont just test materials we ensure public safety, durability, and long-term performance. As an Asphalt Inspector, youll be on the front lines of field testing and observation, supporting paving operations that shape NYCs transportation network. Youll be trained, equipped, and supported to grow in a technical and mission-driven career. Job Summary: We are seeking a proactive and detail-oriented Quality Control Engineer to join our team. This is an on-site role that involves coordinating with subcontractors, reviewing drawing sheets, identifying deficiencies, and ensuring that the project is completed by closing all deficiencies. Experience working with the Port Authority and at airports is must to execute the required project. Key Responsibilities: • Coordinate day-to-day quality control activities with subcontractors on the field., • Interpret and review project drawings and technical specifications to ensure adherence to quality standards., • Identify, document, and report any deficiencies or deviations from standards., • Conduct inspections and audits to verify compliance with client and regulatory requirements., • Maintain detailed and accurate records of quality checks, reports, and corrective actions., • Collaborate with project managers and engineers to resolve quality issues promptly., • Support continuous improvement initiatives and ensure quality protocols are followed. Required Qualifications & Skills: • Bachelors degree or diploma in Engineering, Construction Management, or a related field., • Minimum 23 years of hands-on experience in a quality control role, preferably within construction or infrastructure projects., • Familiarity with Port Authority project requirements is a must., • Strong understanding of construction drawings and site procedures., • Excellent communication and coordination skills., • Ability to work independently in a fast-paced, field-based environment. Preferred Qualifications: • Work alongside engineers, lab staff, and senior inspectors, closely controlling the deficiencies and using your skills to expedite project completion, • Access internal training pathways to broaden your certifications and credentials, • Competitive compensation, • Full-time opportunity with technical and career growth paths, • 401(k), • Health, Dental, Vision Insurance, • Paid Time Off (PTO), • Professional Development Support, • Employee Referral Program, • Internal mentorship and cross-training opportunities

Job Description Location: ONSITE: Mineola NY Pay: $70-80K/yr Excellent benefit package 2-5 years construction experience 4 year Engineering/ Construction Management/ or similar degree required M-F Duties and Responsibilities: Responsible for project administration from sales kickoff to final completion including; • Maintaining project documentation and managing project deadlines/ Q/A-Q/QC, budgeting, • Assist / coordinate with Project Managers for the successful delivery of the work., • Review of project deliverables and developing the project Schedule of Values., • Confirm materials required, generate P.O.s and track to meet delivery date RFI's, SOP drawings., • Confirm subcontractors required, generate P.O.s, manage required insurance requirements to meet corporate compliance., • Tracking project progress and performance. Identify issues that will cause negative variance remotely with field team., • Coordinate with Project Team members and interact with Finance Team for billings and monthly project financial forecasting., • Traveling to job sites, • Track change orders, collaborating with sales, • Develop & execute AIA billings., • Internal: Construction and Service Project Teams, Project Managers, Finance Team, President, Director of Operations, and General Manager., • External: Clients, acting as a Dynaire representative. Benefits: • Medical, • Dental, • Vision, • 401K, • Vacation / PTO, • Excellent Advancement Opportunities #LI-PP1

Job Description The Senior Controls Engineer is an integral part of Champion’s continued success in applying Process Automation and SCADA solutions. This critical, high-profile role is primarily focused on PLC control and SCADA data visualization; incorporating automation, energy monitoring and optimization system analytics. Responsibilities/Essential Functions: · Programming, configuring and maintaining PLC programs and SCADA objects in SCADA system that control and model field assets · Deploying and configuring SCADA objects to support data acquisition from field assets as they are brought online and changed in the field · Create and enforce project specific standards, augment and enhance solutions, benchmark individual and application performance metrics as well as estimate level of effort for initiatives. · Creation and binding of animated visualizations of system graphics and operator interface screens · Generating custom programming scripts to handle global functions · Create Submittals for projects · Commissioning and startup for instrumentation and controls projects Minimum Requirements: · BS in Engineering, Computer Science, or equivalent experience · Minimum of 10 years of experience with SCADA, PLC, and HMI applications · Field Experience in Starting up and commissioning Water, Waste water I&C projects · Experience with AutoCad · Proficiency reading and understanding electrical control schematics · Solid understanding of control and process logic, various communications protocols (Ethernet/IP, MODbus, TCP/IP), and network communications infrastructure · Experience in Factory Talk, Iconics Genesis, Wonderware, GE Fanuc Intellution/Proficy, Citect, Motorola Moscad /ACE 3600 applications · Experience writing control and ladder logic programming, basic scripts, and uploading programs to PLC. Development of HMI. PLC and HMI programming experience for Industrial Automation a plus · Experience with calibration, startup and commissioning of Industrial Instruments Company DescriptionChampion Controls is a leading control systems supplier providing system integration and engineering design services, as well as manufacturing of custom control panels for a variety of markets. We hold Underwriters Laboratory (UL) certifications for the USA and Canada as a manufacturer of industrial control panels, as well as industrial control panels relating to hazardous locations. We employ a staff of talented professional engineers, electrical technicians, and sales people, who can meet your project needs including providing turnkey installations.Champion Controls is a leading control systems supplier providing system integration and engineering design services, as well as manufacturing of custom control panels for a variety of markets. We hold Underwriters Laboratory (UL) certifications for the USA and Canada as a manufacturer of industrial control panels, as well as industrial control panels relating to hazardous locations. We employ a staff of talented professional engineers, electrical technicians, and sales people, who can meet your project needs including providing turnkey installations.

Job DescriptionA confidential industry leader in precision-engineered fluid control systems is seeking a Director of Design Engineering to oversee its design, project engineering, and test lab operations. This is a key leadership role reporting directly to the VP of Engineering, responsible for driving innovation, managing teams, and ensuring technical excellence across new product development.Key Responsibilities: * Lead and manage all activities within the Design Engineering, Project Engineering, and Test Lab departments. * Translate organizational goals into department objectives and deploy resources accordingly. * Review and approve all new product designs to ensure compliance with industry standards and company goals. * Implement systems, procedures, and tools to optimize engineering workflows and technical outcomes. * Prepare performance evaluations for engineering section heads and support career development. * Oversee staffing plans, hiring needs, and capital expenditure requests. * Participate in strategic bid/no-bid decision meetings for new programs Qualifications: * B.S. in Mechanical Engineering required; Master’s degree preferred * 10+ years of experience in hydraulic system design and mechanical product development * Proven track record in conceptual design, prototyping, and full lifecycle development * Strong leadership experience overseeing cross-functional engineering teams * Experience in high-precision, highly regulated manufacturing environments preferred Additional Requirements: * Ability to occasionally lift or move up to 20 pounds * Comfortable working in both office and shop floor environments * Exposure to noise, dust, and mechanical equipment when supporting lab operations Why This Role? This is a high-impact opportunity to shape the engineering direction of a well-established, innovation-driven manufacturer. You’ll lead a team responsible for designing products used in mission-critical applications, where precision, performance, and reliability are paramount.

Akkodis is seeking a Contract-to-Hire Manufacturing Process Engineer for a Contract-to-Direct Hire position in Garden City, NY. This position is Direct Hire and fully onsite, offering growth and a generous benefit package. • Hourly Rate: $55.00 - $60/hour The rate may be negotiable based on experience, education, geographic location, and other factors., • Type: Contract-to-HIre, • Location: Garden City, NY, • Duration: 6 months to Direct Hire Job Specific Duties: • Initial management of efforts to transfer Tooling, Parts and Products to new facility., • Apply continuous improvement methods such as lean manufacturing to enhance manufacturing quality, reliability, or cost-effectiveness, including determining root causes of failures using statistical methods and recommend changes in designs, tolerances, or processing methods., • Design, install, and troubleshoot manufacturing equipment., • Identify opportunities and implement changes to improve products or reduce costs using knowledge of fabrication processes, tooling and production equipment, assembly methods, quality control standards, or product design, materials and parts., • Design testing methods and test finished products or process capabilities to establish standards or validate process requirements., • Design layout of equipment or workspaces to achieve maximum efficiency., • Review product designs for manufacturability or completeness; including purchasing equipment, materials, or parts and preparing documentation for new manufacturing processes or engineering procedures., • Evaluate manufactured products according to specifications and quality standards, including troubleshooting new or existing product problems involving designs, materials, or processes, • Develop sustainable manufacturing technologies and analyze the financial impacts of sustainable manufacturing, • Provide technical expertise or support related to manufacturing., • Develop, document and implement standard work instructions for critical manufacturing operations. Requirements/Qualifications: • Bachelors degree in Industrial Engineering, Manufacturing Engineering or other relevant degree., • Due to contracts with the United States Government, the candidate must be either a US Citizen or Green card., • 3 or more years of progressive experience in manufacturing engineering., • Experience in metal fabrication, welding and/or brazing of pressure containing products., • Experience in a highly regulated industry, such as, Military, Aerospace, Nuclear or Automotive or other similar., • Excellent people and communication skills are required (both oral and written)., • Strong interpersonal skills requiring the ability to resolve conflicting interests and obtain cooperation, • Computer literacy in a MRP system (Oracle a plus), Microsoft Office., • Able to work under pressure, • Highly technical and analytical skills such (drawings, schematics, layout), • Able to think out of box., • Project management skills, • Highly organized and efficient, • Possess leadership and interpersonal skills, • Strong problem-solving skills, • Due to ITAR Restrictions, an export license may be required. If you are interested in this role, then please click APPLY NOW. For other opportunities available at Akkodis, or any questions, feel free to contact me at . We are open to working with professionals who are authorized to work in the US without sponsorship. No C2C Equal Opportunity Employer/Veterans/Disabled Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, an EAP program, commuter benefits, and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Disclaimer: These benefit offerings do not apply to client-recruited jobs and jobs that are direct hires to a client. To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit . The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: · The California Fair Chance Act · Los Angeles City Fair Chance Ordinance · Los Angeles County Fair Chance Ordinance for Employers · San Francisco Fair Chance Ordinance

Must be US Citizen 15+ years of expeirnece PE is a Huge Plus Hybrid Schedule 2 in the office 3 from home Pharma/FDA/Semiconductor/Clean Room Responsibilities: • Engineering and design oversight for medium and low voltage power distribution, UPS/Generators, Lighting, Grounding, Fire Alarm, Security, Public Address (PA), Telecomm and Heat Trace systems., • Evaluate the desired goal of the system and develop, design, or select the required equipment or power/controls to achieve the goal., • Perform calculations and evaluations in the design of equipment and systems for industrial applications., • Direct activities to ensure that construction, installation, and operational testing conform to functional specifications, recognized codes and standards, and customer requirements, • Maintains effective communication with project team members and with the customer, • Use computer-assisted engineering and design software and equipment to perform engineering tasks., • Bachelor's or Master of Science Degree in Electrical Engineering from accredited program, • Professional Engineer license in IN or ability to obtain, • At least 15 years of experience in electrical engineering design of buildings, • Solid working knowledge of NFPA 70 (NEC), • Ability to perform power system studies including short circuit, load flow, protective coordination, and arc flash, • Provide leadership, guidance, and instruction to less experienced staff members, • Excellent written & verbal communication skills, • Strong analytical and problem solving skills, • Must be capable of devising new approaches to problems encountered, • Bachelor's or Master of Science Degree in Electrical Engineering from accredited program, • Professional Engineer license in IN or ability to obtain, • At least 15 years of experience in electrical engineering design of buildings, • Solid working knowledge of NFPA 70 (NEC), • Ability to perform power system studies including short circuit, load flow, protective coordination, and arc flash, • Provide leadership, guidance, and instruction to less experienced staff members, • Excellent written & verbal communication skills, • Strong analytical and problem solving skills, • Must be capable of devising new approaches to problems encountered, • Life Science and/or advanced manufacturing facility electrical design experience, • Working knowledge of ACAD, Revit or BIM software, • Power system studies software (ETAP, SKM, EasyPower), • Forward thinking, eager to learn best practices, and contribute with innovative ideas, • Displayed ability to learn quickly and driven to broaden knowledge base, • Ability to collaborate and work effectively in a variety of teams, including multi-disciplinary teams, • Passionate about buildings and construction Equal Opportunity Employer/Veterans/Disabled Benefit offerings include medical, dental, vision, term life insurance, short-term disability insurance, additional voluntary benefits, commuter benefits and 401K plan. Our program provides employees the flexibility to choose the type of coverage that meets their individual needs. Available paid leave may include Paid Sick Leave, where required by law; any other paid leave required by Federal, State or local law; and Holiday pay upon meeting eligibility criteria. Disclaimer: These benefit offerings do not apply to client-recruited jobs and jobs which are direct hire to a client To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit ___ To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit The Company will consider qualified applicants with arrest and conviction records.

Participate in this 11+ week summer internship program to gain valuable career related work experience with a reputable company, creating the link between student's educational goals and future employment opportunities. Posillico has an exceptional safety program coupled with proactive employees thr

Manager, Clinical Operations - Clinical Engineering - Mineola.NYU Langone HospitalLong Island is a 591-bed university-affiliated medical center, which offers sophisticated diagnostic and therapeutic care in virtually every specialty and subspecialty of medicine and surgery.We are a major regional he

Excellent analytical skills including the ability to analyze, troubleshoot, process, change and improve design, process, and the products. We are seeking a seasoned Full Stack Developer to work along-side, a team of software engineers, in a collaborative Agile environment to develop and maintain new

Adjunct Faculty - Engineering Management/Industrial Engineering. The BS Engineering Management program at New York Institute of Technology is looking for adjunct faculty to teach courses for this program, such as Operation Research, Senior Design, Technology and Global Issues. Adjunct Faculty offere

Audit Partner, Architecture, Engineering & Construction. Audit Partner, Architecture, Engineering & Construction. Audit, Architecture, Engineering & Construction (AEC).

CNC Programming Engineer We are looking for a CNC Programming Engineer to join our Target Rock team! As our CNC Programming Engineer you will interact with and support the machine shop production and personnel. The individual receives minimum direction from the Plant or Manufacturing Engineering Manager regarding methodology of manufacturing. The individual is responsible to generate methods in detailed format for Manufacturing Production. The individual will perform all necessary tool and fixture designs for both manufacturing and quality requirements. The individual will interact with both in-house manufacturing personnel, as well as vendor interaction in the support of all tool and fixture fabrication. The individual supports CNC Programming methods within our manufacturing facility. Location: East Farmingdale, NY Salary/hourly rate: $82,200 to $120,000 Please note that the salary range information provided is a general guideline only, reflecting a position based in New York. Criteria such as the candidate's qualifications and relevant experience, the scope of the specific position, as well as market and business considerations will be evaluated when extending an offer. We Take Care of Our People Paid Time Off I 401K with Employer Match and Profit Sharing I Health and Wellness Benefits I Learning and Development Opportunities I Referral Program I Competitive Pay I Recognition I Employee Stock Purchase Plan I Inclusive & Supportive Culture * Your Challenge \n • Generates Operation Sheets to support all phases of manufacturing within the facility. \n, • Identifies and designs necessary tooling and fixtures required to support manufacturing processes.\n, • Interacts with in-house and vendors in support of manufacturing components, as well as tool and fixture fabrication.\n, • Performs quotations for pricing inquiries, as well as manufacturing budget review for manufacturing processes.\n, • Maintain all applicable manufacturing project documentation.\n, • Additional responsibilities as assigned by Supervisor.\n, • Assists in the training of shop personnel to optimize defined manufacturing processes.\n, • Must be a US citizen\n, • Associate Degree minimum in Manufacturing/Mechanical Technology or equivalent related field or a commensurate level of related experience.\n, • 5 to 10 years experience performing manufacturing engineering responsibilities, inclusive of manufacturing methods, tool and fixture design, and budget and cost analysis. \n, • Working knowledge of Mastercam CAD/CAM software version 8.xx or greater.\n, • Ability to methodize complex parts with minimum supervision. Knowledge of machine shop practices and techniques.\n, • Design and overview tool and fixturing requirements for manufacturing components.\n, • Knowledge of raw materials and related machinability. Ability to define applicable feeds - speeds combinations for established manufacturing process.\n, • Ability to generate CAD drawings.\n, • Capable to analyze manufacturing equipment or tooling problems to efficiently implement solutions to economically solve these production problems in a timely manner.\n, • Broad knowledge of computer-controlled machine tools.\n Our Values Environmental, Social and Governance Founded in 1951 to meet the special severe service valve requirements of the United States Nuclear Navy, Target Rock is today the premier supplier of highly engineered, valves and related products to both the U.S. Navy nuclear fleet and the global nuclear power generation industry. The first Target Rock valves were installed on the U.S.S. Nautilus, the U.S. Navy's first nuclear powered submarine. To learn more, please visit us at Curtiss-Wright EMS - Target Rock (cw-ems.com) *Please note, benefits are country specific and may vary from location to location. #LI-NK No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Resumes submitted directly to any Curtiss-Wright employee or affiliate will not qualify for fee payment, and therefore become the property of Curtiss-Wright. Compliance Statement This position may require exposure to export-controlled information and subject to additional security screening. In the event information provided during the security screening reveals ineligibility to access export-controlled information, any offer of employment may be reconsidered or withdrawn. Curtiss-Wright is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, ethnicity, color, sexual orientation, gender identity, physical or mental disability, age, ancestry, legally protected medical condition, family care status, marital status, religion, veteran status, national origin, or any other legally protected status. If you require accommodation during the recruitment process, please contact Talent Acquisition. For US Applicants: EEO is The Law - click here for more information. If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Talent Acquisition and we will make all reasonable efforts to accommodate your request.

Powerwell is a leading recruitment firm helping our clients discover top talent. We are recruiting for a Field Service Technician. Our client will provide a company vehicle with an EZ Pass. Any travel expenditures outside our client’s provided vehicle and/or EZ Pass will be promptly reimbursed to the employee. Regular travel with the use of the company provided vehicle would be required at multiple facilities, located in Bethpage, Brooklyn, Lawrence, and Queens. Job Description: Our client is seeking a Field Service Technician to provide on-site maintenance and repair services for conveyor systems. This role involves diagnosing and troubleshooting electrical, pneumatic, and hydraulic issues, as well as using hand and power tools to resolve mechanical problems. The position requires 100% local travel to client sites in Bethpage, NY, so candidates must be based within a commutable distance. This is an hourly position, with pay ranging from $29.00 to $38.00 per hour based on experience. Key Responsibilities: • Install, repair, and maintain conveyor belts and related systems., • Replace and align power and idler rollers, pulleys, bearings, gearboxes, motors, and sprockets., • Diagnose electrical and mechanical problems, including electrical component replacement., • Troubleshoot and install motor starters, circuit breakers, and other electrical components., • Conduct and document system audits, ensuring proper functionality of conveyor belts, pneumatic, and hydraulic equipment., • Evaluate safety equipment to ensure proper installation and operation., • Maintain and submit timely reports on audits, repairs, and parts., • Advise customers on potential upgrades or new parts., • Ensure company vehicles and tools are properly maintained., • Perform additional duties as assigned by management. Required Qualifications: • High school diploma or equivalent., • Valid driver's license and ability to travel locally., • Prior experience with industrial equipment maintenance, particularly conveyor systems., • Proficiency with hand and power tools., • Electrical troubleshooting experience, including VFD configuration and sensor replacement., • Strong verbal and written communication skills., • Ability to work flexible or irregular hours as needed., • Ability to pass a pre-employment physical and adhere to safety standards (OSHA, industry, and company-specific). Preferred Qualifications: • Experience with pneumatic and hydraulic equipment., • Millwright experience, including welding and fabrication., • PLC coding experience is a plus. Benefits: • 401(k) with company matching., • Vision, dental, and health benefits., • HSA/FSA employer matching., • Legal Shield coverage. Note: • This position requires 100% local travel to client sites, so relocation candidates will not be considered.

Bachelor's degree in engineering, Manufacturing Engineering preferred, or other technical related discipline is required; MBA or other relevant advanced degree is preferred. Actively partner in the creation and review of engineering changes when needed. Director, Manufacturing Engineering.

This role requires an expert understanding of backend programming, network protocols, and database queries. Expertise in database architecture, including design for high availability, data partitioning, replication strategies, and disaster recovery planning. Experience with Object-Relational Mapping

Familiar with collocation inventory systems, BMS systems, biometric access, video surveillance systems, electrical and cooling infrastructure systems, OSP networks, cross connect understanding. Strong knowledge of general industry networking technologies, including UPS, Generators, and Mechanical sy

The BS Mechanical Engineering program at New York Institute of Technology is looking for adjunct professors to teach courses for this program, such as Material Science, Energy Systems. Mechanical Engineering or a related area. Adjunct Faculty- Mechanical Engineering.

Use computer-assisted engineering and design software and equipment to perform engineering tasks. Professional Engineer license in IN or ability to obtain. At least 15 years of experience in electrical engineering design of buildings.

ABOUT The most secretive of Navy vessels, a submarine requires a select community of specially trained professionals to operate its classified, highly advanced hardware.The Sailors in the Submarine Electronics Computer Field (SECF) work with a submarine’s sonar, weapons, communications, and naviga

Experience with Object-Relational Mapping (ORM) frameworks like Hibernate understanding how to map database tables to objects in code. This role requires an expert understanding of backend programming, network protocols, and database queries. Expertise in database architecture, including design for

Administer and engineer CyberArk for integrating privileged accounts across on-premises and cloud environments, including Azure. Processes Service Desk tickets assigned to the Engineering team. The IAM & PAM Engineer will be responsible for ensuring that Altice USA's Identity & Access Management and

Intern - Network Planning & Engineering.Lightpath is one of the largest competitive local exchange carriers in the tri-state area.Weown and operate our infrastructure "from the ground up" by deploying over 20,000 route miles connecting 13,500 on-net/LIT buildings.With a strong portfolio of cutting e