Trabajos national security agency en Edison, New JerseyCrear alertas

Job Description Position Overview: This position is responsible for performing a wide range of semi-skilled and skilled maintenance, repair, and restoration work across manufacturing, office, and support areas. This role supports the installation and relocation of production and office equipment, monitors and performs minor upkeep of major utility systems, and ensures general building, grounds, and facility operations are maintained in a safe and functional condition. Key systems supported include air compressors, furnaces, chillers, vacuum pumps, HVAC equipment, plumbing, and general building infrastructure. This position plays a critical role in maintaining production readiness and overall facility reliability. Key Responsibilities: • Support daily operations of manufacturing plants, buildings, and office areas under the direction of the Facilities Director and Facilities Supervisor, • Install, relocate, and remove production equipment using rigging, forklifts, pallet jacks, equipment skates, and similar tools, • Connect equipment to facility utilities including water, coolant, compressed air, vacuum, and wastewater drainage, • Maintain and repair building systems and components including doors, turnstiles, plumbing fixtures, leaks, locks, stairs, racking, guardrails, monitors/TVs, wastewater pumps, and related infrastructure, • Relocate office furniture and equipment; install or remove cubicles, signage, shelving, worktables, and filing cabinets as needed, • Serve as the first line of response to facility and production support issues prior to engaging external contractors for major system repairs (e.g., air compressors, vacuum pumps, furnaces, chillers, RODI systems, nitrogen systems), • Technician is not expected to perform major equipment repairs but must understand system operation and provide temporary solutions and guidance, • Conduct daily facility and property inspections to identify safety concerns and take immediate corrective action, • Perform a broad range of skilled maintenance tasks over extended periods, • Complete work in compliance with OSHA regulations and safety practices, including lockout/tagout procedures, • Read and interpret sketches, diagrams, and blueprints, • Fill in for janitor/custodial functions, when necessary., • Source parts for repairs and regular maintenance., • Coordinate with external service providers for equipment and facilities repair, when required., • Timely Corrective Action response and resolution to relevant situations., • Engage and support companywide Safety and Cleanliness Programs., • As part of the EMS- Environment Management System, will meet compliance obligations and accountability by contributing but not limited to the company's recycling guidelines, proper waste and other environmental performance practices., • A minimum of 7 years of Maintenance Experience. Including methods, practices and equipment used in facilities management and activities, including a variety of building trades work., • High School Graduate required. College or Trade School preferred., • Electrical, Mechanical, Welding, Electro-Mechanical and equipment training, a plus., • Knowledge of tools and equipment used in building maintenance, reconstruction and repair work., • Experience with a virtual work order and spare parts management system preferred., • Strong analytical skills., • Task oriented excellent organizational skills, ability to prioritize work load., • Versatile "jack-of-all-trades" maintenance skill set, • Plumbing experience required, primarily PVC socket weld and occasional threaded pipe, • HVAC experience strongly preferred, • General mechanical aptitude, • General construction knowledge (e.g., wall repair, painting), • Must be able to lift 70 lbs, • Must be able to sustain physical work for 8+ hours on a standard 3 shift operation or 12+ hours per day on 24/7 operation. Also includes the following:, • Standing, • Reaching and pulling, • Sight, • Walking through shop, • Bending, climbing and crouching., • Office environment is of moderate noise level., • Shop noise levels are such that protective ear-coverings are recommended., • Sometimes subject to external weather conditions., • Short notice, overtime demand according to equipment or facility breakdowns., • Repair work on heavy equipment often in a seated or standing position., • Grease, oil, water exposure., • Majority of facilities are air-conditioned year-round About CompoSecure CompoSecure, a GPGI business (NYSE: GPGI), is the leading manufacturer of Premium Metal Payment Cards and also offers best-in-class Authentication and Digital Asset solutions. The Company's offerings combine elegance, simplicity, and security to deliver exceptional experiences and peace of mind, enabling trust for millions of people around the globe. For more information, please visit and . We offer a comprehensive benefits package designed to support your health, financial well-being, and work-life balance, including medical, prescription, dental, and vision coverage; FSA/HSA options; company-paid life and disability insurance; 401(k) with company match; paid time off (PTO) and holidays; annual bonus opportunities; an employee assistance program (EAP); and opportunities for career growth and advancement. Additional details will be provided during the hiring process. CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans. Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to .

Job Description About CompoSecure Founded in 2000, CompoSecure is a technology partner to market leaders, fintechs and consumers enabling trust for millions of people around the globe. The company combines elegance, simplicity, and security to deliver exceptional experiences and peace of mind in the physical and digital world. CompoSecure's innovative payment card technology and metal cards with Arculus security and authentication capabilities deliver unique, premium branded experiences, enable people to access and use their financial and digital assets, and ensure trust at the point of a transaction. For more information, please visit and . Position Overview: This position is responsible for ensuring the continuous functionality of all production equipment. Key Responsibilities: • Perform regularly scheduled preventive maintenance on all production equipment and machinery., • Perform emergency repairs on all production equipment and machinery., • Conform to all procedures regarding spare parts usage., • Perform repairs and maintenance according to any and all OSHA and other safety requirements, i.e.: lockout/tagout., • Perform all maintenance and repairs in an accurate, complete and timely manner., • Maintain mechanical availability of all production equipment., • Maintain mechanical availability of all facility equipment. Other Important Responsibilities: • Maintain a daily log of Preventive Maintenance and downtime through Computerized Maintenance Management System, Simplicity CMMS, • Maintain a daily work log and EOD/end of day email report to Upper management., • Assist the Parts Inventory Clerk with proper specs and info when sourcing parts for repairs and regular maintenance., • Work with outside contractors during routine maintenance and emergency repairs., • Timely Corrective Action response and resolution to relevant situations., • As required, will install new equipment, facility upgrades, perform repair work as needed and support production., • Engage and support companywide Safety and Cleanliness Programs., • As part of the EMS- Environment Management System, will meet compliance obligations and accountability by contributing but not limited to the company's recycling guidelines, proper waste and other environmental performance practices, • Will be required to perform other job functions, as assigned Qualifications: • A minimum 7-10 years (or more) of relevant experience., • Electrical, Mechanical, Welding, Electro-Mechanical and equipment training, a plus., • High School Graduate required. Vocational Degree Preferred., • Experience with a virtual work order and spare parts management system preferred., • Strong analytical skills., • Task oriented excellent organizational skills, ability to prioritize work load., • Enthusiastic attitude, cooperative team player, adaptable to new or changing circumstances, professional demeanor, self-motivated, creative and innovative. Physical requirements and work environment: • Must be able to lift 70 lbs., • Must be able to sustain physical work for 8+ hours on a standard 3 shift operation or 12+ hours per day on 24/7 operation. Also includes the following:, • Standing, • Reaching and pulling, • Sight, • Walking through shop, • Bending, climbing and crouching., • Office environment is of moderate noise level., • Shop noise levels are such that protective ear-coverings are recommended., • Sometimes subject to external weather conditions., • Short notice, overtime demand according to equipment or facility breakdowns., • Repair work on heavy equipment often in a seated or standing position., • Grease, oil, water exposure., • Mechanics must provide all industry required hand tools and tool box. Checklist will be provided. All specialty tools will be provided by CompoSecure. At CompoSecure, we believe in supporting our employees with a comprehensive benefits package that promotes health, financial well-being, and work-life balance. Our full-time team members enjoy access to: • Medical, Dental & Vision Coverage, • Flexible Spending Accounts (FSA), • Company-Paid Life and Disability Insurance, • 401(k) with Company Match, • Paid Time Off & Paid Holidays, • Annual Bonus Opportunities, • Employee Assistance Program (EAP) Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to . CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans.

Job Description About CompoSecure CompoSecure, a GPGI business (NYSE: GPGI), is the leading manufacturer of Premium Metal Payment Cards and also offers best-in-class Authentication and Digital Asset solutions. The Company's offerings combine elegance, simplicity, and security to deliver exceptional experiences and peace of mind, enabling trust for millions of people around the globe. For more information, please visit and . Position Overview: This is a hands-on individual contributor production role requiring expertise in multiple manufacturing disciplines, including CNC machining, manual tacking, lamination, engraving, and card finishing. The ideal candidate is a reliable team player who can adapt to different functions as needed to support production goal. Key Responsibilities: • Operate and maintain CNC machines, lamination systems, engraving systems, and/or card finishing equipment to produce high-quality components., • Perform tacking operations with precision and in accordance with production requirements., • Inspect and verify output quality at each stage, ensuring adherence to standards and specifications., • Maintain accurate documentation of production data, process parameters, and quality checks through our ERP input tools or manual documentation., • Flex between functions and workstations based on production demand or team capacity., • Rapidly adapt to changes in workflow, priorities, and scheduling to support production goals., • Collaborate with supervisors and planners to address bottlenecks or resource gaps in our Lead Daily Management solution., • Follow all safety protocols and procedures, maintaining a safe and organized workspace., • Conduct basic troubleshooting and preventative maintenance on equipment., • Report malfunctions or hazards promptly to minimize downtime and risk. Skills & Qualifications • High School Diploma or GED required; technical training or vocational certification preferred., • 3+ years of experience in a hands-on manufacturing environment, • Demonstrated expertise in at least one of the following areas: CNC, tacking, lamination, engraving, card finishing., • Strong mechanical aptitude and ability to read technical drawings, blueprints, or CAD files., • Excellent communication, coordination, and interpersonal skills., • Proven ability to adapt to changing priorities and support team flexibility., • Preferred: Familiarity with lean manufacturing and continuous improvement principles., • Preferred: Understanding of ISO or other quality management systems., • Basic computer literacy for equipment interfaces, reporting, and tracking. Preferred: • Familiarity with lean manufacturing and continuous improvement principles., • Understanding of ISO or other quality management systems., • Medical, Dental & Vision Coverage, • Flexible Spending Accounts (FSA), • Company-Paid Life and Disability Insurance, • 401(k) with Company Match, • Paid Time Off & Paid Holidays, • Annual Bonus Opportunities, • Employee Assistance Program (EAP) Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to . CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans.

Customs and Border Protection Officer (CBPO) NEW RECRUITMENT INCENTIVES! U.S. Customs and Border Protection (CBP) offers those interested in a career in law enforcement an exceptional opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission of protecting America. You will be part of the Department of Homeland Security workforce, protecting American interests and securing our nation. If you are looking for a rewarding career with great pay, benefits, and job stability, now is the time to make your move. DON'T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW As a Customs and Border Protection Officer (CBPO) , you will be part of our 60,000 workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation's economic prosperity. Being a CBPO makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession. Typical assignments include: Enforcing customs, immigration, and agriculture laws and regulations. Facilitating the flow of legitimate trade and travel. Conducting inspections of individuals and conveyances. Determining the admissibility of individuals for entry into the United States; and Preventing the illegal entry of individuals and prohibited goods and the smuggling of illegal drugs and other contraband. Duty Locations – Incentives available for some locations You will be asked to provide your preference for one of the following mission-critical locations: Anchorage, AK; Douglas, Lukeville, Nogales and San Luis, AZ; Calexico, Otay Mesa, San Francisco, San Ysidro, and Tecate, CA; Washington, D.C.; Key West, Miami, and Orlando FL; Honolulu, HI; Chicago, IL; Calais, Eastport, Houlton, Jackman, Madawaska, Van Buren, and Vanceboro, ME; Detroit, Port Huron, and Sault Ste Marie, MI; Grand Portage and International Falls, MN; Raymond, Roosville, Sweetgrass, and Wild Horse, MT; Columbus and Santa Teresa, NM; Alexandria Bay, Champlain, Massena, Trout River, and Buffalo NY; Dunseith, Pembina, and Portal, ND; Brownsville, Dallas, Del Rio, El Paso, Hidalgo, Laredo, Presidio, Progreso and Houston, TX; Beecher Falls, Derby Line, Highgate Springs, Norton, and Richford, VT; Blaine, Oroville, and Sumas, WA. The preference locations listed above are expected to have vacancies available in the future, however, if the duty locations do not have vacancies at the time of your final offer, you may be offered a duty location in another geographic location within the United States. Locations offered are based on operational and mission requirements and critical agency hiring needs for entry-level CBPOs as determined by the CBP Office of Field Operations (OFO). Salary – and Duty Location Recruitment Incentives – and Benefits Recruitment Incentive Newly appointed Customs and Border Protection Officers (as defined in 5 CFR 575.102 ) will be offered up to a $15,000 incentive per year, for a three-year service contract, in the following locations: Arizona: Douglas, Lukeville, Nogales, San Luis California: Calexico Hawaii: Honolulu Maine: Calais, Eastport, Houlton, Jackman, Madawaska, Van Buren, Vanceboro Michigan: Detroit, Port Huron, Sault Sainte Marie Minnesota: Grand Portage, International Falls Montana: Raymond, Sweetgrass New York: Alexandria Bay, Champlain, Massena, Trout River North Dakota: Dunseith, Portal Vermont: Beecher Falls, Derby Line, Highgate Springs, Norton, Richford Washington: Blaine, Oroville Recruitment Incentive Newly appointed Customs and Border Protection Officers (as defined in 5 CFR 575.102 ) will be offered up to a $15,000 incentive per year, for a four-year service contract, in the following locations: California: Otay Mesa, San Francisco, San Ysidro, Tecate Florida: Key West North Dakota: Pembina Annual Base Salary for newly appointed CBPOs varies as follows: GS-9 $61,111 - $124,443 per year Locality pay varies by duty location. Note: A fully trained CBPO is eligible for up to $45,000 in overtime pay in addition to the starting salary. Grade level eligibility and salaries vary depending upon background, including experience and education, and duty location of the opportunity. This is a career ladder position with a grade level progression of GS-5, GS-7, GS-9, GS-11, and GS-12. You will be eligible for a promotion to the next higher grade level (without re-applying) once you successfully complete 52 weeks in each grade level. Promotions are at the discretion of the agency. Officers are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering. Qualifications: You qualify for the GS-9 grade level in one of the following ways: experience, education, or a combination of both. Experience: A minimum of one (1) year of specialized experience equivalent to at least the next lower grade level that includes: Detaining suspected violators of federal, state, or local laws and/or arresting violators using the proper law enforcement methods. Enforcing the laws and regulations relating to importing, exporting, and/or international shipping to and from the United States. Utilizing intelligence techniques and behavior analysis to identify potential threats and perform risk assessments for violations of laws and threats to national security. Conducting interviews in a law enforcement capacity for the purposes of gaining information from suspected violators of laws to determine the appropriate course of action. The above experience will be applied in connection with the following: Ability to make rapid, accurate judgments and decisions with respect to the application of the regulations, instructions, and procedures for importing and exporting merchandise to and from the United States; or enforcement and administration of laws relating to the right of persons to enter, reside in or depart from the United States, Guam, Puerto Rico, and the U.S. Virgin Islands. Education Substitution: A master's (or higher) degree, or two or more years of progressively higher-level graduate education leading to such a degree, or an LL.B. or J.D. from an accredited college or university; OR Combination of Experience and Education: A combination of specialized experience AND successfully completed graduate-level education. This will be calculated using your resume and official or unofficial transcripts submitted with your application. Other Requirements: Citizenship : You must be a U.S. Citizen to apply for this position. Residency : You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three (3) of the last five (5) years. Age Restriction : In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions. Candidates must be referred for selection to the Customs and Border Protection Officer position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03. The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d). Veterans' Preference : You may also be eligible for an excepted service Veterans Recruitment Appointment (VRA). The age restriction does not apply if you are Veterans' Preference eligible. Formal Training : You will be required to complete a paid pre-academy orientation for approximately two (2) weeks at your home port. You will then attend a 101-day training program – CBP Field Operations Academy – conducted at the Federal Law Enforcement Training Center (FLETC) located in Glynco, GA. This training consists of basic law enforcement skills, immigration laws, firearms training, examination of cargo/bags/merchandise, physical fitness, etc. Candidates assigned to the southern border, Miami, or Puerto Rico duty locations must attend and pass an online Spanish training program, which will be completed at their home port. Successful completion of the Academy is required for this position . How to Apply: Click the Apply button on this site. You will be linked to the CBP Talent Network page. For Position of Interest , select Customs and Border Protection Officer. You'll then receive a link(s) to the CBPO JOA(s) on USAJOBS to complete your application. Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit. You will be evaluated based on your resume, supporting documents, and the CBPO Entrance Exam. As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with OFO and CBP.

Job Description Position Overview: The Level 2 Desktop Technician provides hands-on technical support for desktop systems, hardware, software, and network connectivity across office, production, warehouse, and remote environments. This role is responsible for resolving helpdesk requests via phone, email, and the ticketing system while maintaining service levels and ensuring timely ticket closure. The technician supports Windows, macOS, ChromeOS, mobile devices, IP telephony, printers, production-floor technology, and conference room technology. The role also performs user account administration, employee onboarding, and offboarding tasks. This position requires onsite support across multiple buildings, collaboration with IT colleagues on tasks and projects, creation of documentation for troubleshooting and resolutions, and participation in an on-call rotation to support business-critical operations outside of typical office hours in a 24/7 facility. The Help Desk Technician will work on-site 5 days a week. Key Responsibilities: Routine IT Functions • Provide technical assistance and support for incoming requests and issues related to desktop systems, software, and hardware across both IT, production, and warehouse environments., • Support office staff, production staff, production floor, and warehouse equipment., • Assists in managing user profiles in Active Directory, Exchange, and Azure AD., • Investigate, prioritize, and resolve issues in a timely manner while maintaining Helpdesk ticket queue (ManageEngine ServiceDesk)., • Must be able to drive and provide onsite support for 5 buildings within Somerset., • Install and configure new desktops, laptops, tablets, and conference room technology with required company software, including Windows, macOS, Chromebooks, Android tablets, Vibe Boards, and Smart TVs., • Assist with IP telephone support., • Provide support for and maintain working knowledge of software and platforms used across the environment, including Adobe applications, Citrix, Microsoft Teams, Slack, ManageEngine products, Mosyle, Intune, Splashtop, Zscaler, SentinelOne, Tenable, and various AI tools. Other Important Responsibilities: • Handle email and telephone correspondence in a timely and professional manner., • Respond to inquiries for the purpose of resolving problems, providing information, and or escalating issues to appropriate personnel., • Perform other miscellaneous duties as assigned. Qualifications: • Minimum 3 to 5 years of industry experience., • Bachelor's degree, A+, or Microsoft certifications., • High level of computer literacy including working knowledge of Windows 10 and 11, ChromeOS, iOS, Android, Mac and Microsoft Office applications., • Knowledge of AI fundamentals with entry‑level experience applying AI tools in a business or technical environment, • Excellent communication skills, both oral and written., • Strong attention to detail and ability to self-check work., • Excellent time management skills., • Proficient in disassembling and servicing desktop and laptop systems to diagnose issues and replace components., • Perform employee onboarding, laptop deployment, and offboarding tasks., • Task-oriented mindset with excellent organizational skills, strong prioritization abilities, and the initiative to identify and act independently., • Self-motivated, enthusiastic attitude, cooperative team player, adaptable to new or changing circumstances, professional demeanor, sensitive to client needs, creative and innovative., • Document all troubleshooting steps, resolutions, and root cause details within each ticket prior to closure, and contribute solutions to the knowledge base as appropriate., • Diagnose and resolve hardware, software, and peripheral issues for office staff and production-floor equipment across all Compo sites (Pierce, Davidson, Memorial, Roosevelt, Apgar buildings and Remote/International users)., • Maintain and manage shared printers, label printers, and production-floor barcode scanning equipment., • Create, modify, and deactivate user accounts in Active Directory, Azure AD, and Microsoft Exchange in accordance with HR onboarding/offboarding checklists., • Demonstrate strong understanding and knowledge of LAN/WAN/Wi-Fi architecture including VLANs, DHCP, DNS, and basic switch port identification across the campus network., • Troubleshoot network connectivity issues at the desktop level, including ethernet drops and Wi-Fi authentication., • Foundational understanding of AI tools and their practical application in a business or technical support environment., • Maintains a clean, organized, and professional work area at all times, including personal workspace and shared IT storage areas, ensuring equipment, tools, and materials are properly stored, labeled, and free of clutter. Physical requirements and work environment: • Must be able to work beyond 40 hour week during upgrades or new functionality rollout if necessary., • Must be able to work a flexible schedule, including potential weekends, early mornings, late hours, or staggered shifts., • Participate in a rotating on-call schedule to provide off-hours and weekend support for the production floor and international users., • Must have a valid driver's license and personal vehicle., • Must be able to lift 50 lbs., • Must be able to sustain office work for 8+ hours per day including the following:, • Sitting in an office chair, • Typing, • Reaching for the telephone, • Standing at office equipment, • Hearing for phone use, • Sight for computer use, • Using a ladder, • Office environment is of moderate noise level., • Production floor is of medium-high noise level. About CompoSecure CompoSecure, a GPGI business (NYSE: GPGI), is the leading manufacturer of Premium Metal Payment Cards and also offers best-in-class Authentication and Digital Asset solutions. The Company's offerings combine elegance, simplicity, and security to deliver exceptional experiences and peace of mind, enabling trust for millions of people around the globe. For more information, please visit and . We offer a comprehensive benefits package designed to support your health, financial well-being, and work-life balance, including medical, prescription, dental, and vision coverage; FSA/HSA options; company-paid life and disability insurance; 401(k) with company match; paid time off (PTO) and holidays; annual bonus opportunities; an employee assistance program (EAP); and opportunities for career growth and advancement. Additional details will be provided during the hiring process. CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans. Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to .

Job Description About CompoSecure CompoSecure, a GPGI business (NYSE: GPGI), is the leading manufacturer of Premium Metal Payment Cards and also offers best-in-class Authentication and Digital Asset solutions. The Company's offerings combine elegance, simplicity, and security to deliver exceptional experiences and peace of mind, enabling trust for millions of people around the globe. For more information, please visit and . Position Overview: This is a hands‑on production role focused on supporting manufacturing operations through consistent execution of assigned tasks. The Operator works under direct supervision and is trained on specific equipment or processes such as CNC machining support, tacking, lamination, engraving, or card finishing. The ideal candidate is dependable, detail‑oriented, and eager to learn multiple functions to support daily production needs. Key Responsibilities: • Operate assigned production equipment or workstations following established procedures and work instructions., • Perform basic production tasks such as loading materials, monitoring equipment operation, and completing finishing steps., • Conduct visual inspections of parts to ensure quality standards are met and escalate defects or issues to the Supervisor., • Accurately complete required production and quality documentation using ERP tools or manual logs., • Follow all safety guidelines, policies, and standard operating procedures to maintain a safe and organized work environment., • Support flexibility by rotating between tasks or workstations as trained and assigned., • Communicate equipment issues, material shortages, or process concerns promptly to the Supervisor., • Participate in on‑the‑job training to build skills across manufacturing processes and equipment. Qualifications: • High School Diploma or GED required., • 1+ year of experience in a manufacturing, production, or industrial environment preferred., • Basic mechanical aptitude and willingness to learn manufacturing equipment and processes., • Ability to follow detailed instructions, standard work, and safety procedures., • Strong attention to detail and commitment to quality., • Reliable attendance and ability to work in a fast‑paced production environment., • Exposure to CNC machining, lamination, engraving, tacking, or finishing operations., • Familiarity with lean manufacturing concepts or continuous improvement practices., • Experience working in a regulated or quality‑driven manufacturing environment., • Medical, Dental & Vision Coverage, • Flexible Spending Accounts (FSA), • Company-Paid Life and Disability Insurance, • 401(k) with Company Match, • Paid Time Off & Paid Holidays, • Annual Bonus Opportunities, • Employee Assistance Program (EAP), • Career Advancement Opportunities Benefits eligibility and details will be shared during the hiring process. We're excited to support you in building a rewarding career with us. Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to . CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans.

Job Description Position Overview: This is a hands-on individual contributor production role requiring expertise in multiple manufacturing disciplines, including CNC machining, manual tacking, lamination, engraving, and card finishing. The ideal candidate is a reliable team player who can adapt to different functions as needed to support production goal. Key Responsibilities: • Operate and maintain CNC machines, lamination systems, engraving systems, and/or card finishing equipment to produce high-quality components., • Perform tacking operations with precision and in accordance with production requirements., • Inspect and verify output quality at each stage, ensuring adherence to standards and specifications., • Maintain accurate documentation of production data, process parameters, and quality checks through our ERP input tools or manual documentation., • Flex between functions and workstations based on production demand or team capacity., • Rapidly adapt to changes in workflow, priorities, and scheduling to support production goals., • Collaborate with supervisors and planners to address bottlenecks or resource gaps in our Lead Daily Management solution., • Follow all safety protocols and procedures, maintaining a safe and organized workspace., • Conduct basic troubleshooting and preventative maintenance on equipment., • Report malfunctions or hazards promptly to minimize downtime and risk. Skills & Qualifications • High School Diploma, GED or relevant experience required., • 3+ years of experience in a hands-on manufacturing environment, • Demonstrated expertise in at least one of the following areas: CNC, tacking, lamination, engraving, card finishing., • Strong mechanical aptitude and ability to read technical drawings, blueprints, or CAD files., • Excellent communication, coordination, and interpersonal skills., • Proven ability to adapt to changing priorities and support team flexibility., • Preferred: Familiarity with lean manufacturing and continuous improvement principles., • Preferred: Understanding of ISO or other quality management systems., • Basic computer literacy for equipment interfaces, reporting, and tracking. Preferred: • Familiarity with lean manufacturing and continuous improvement principles., • Understanding of ISO or other quality management systems., • Basic computer literacy for equipment interfaces, reporting, and tracking. About CompoSecure CompoSecure, a GPGI business (NYSE: GPGI), is the leading manufacturer of Premium Metal Payment Cards and also offers best-in-class Authentication and Digital Asset solutions. The Company's offerings combine elegance, simplicity, and security to deliver exceptional experiences and peace of mind, enabling trust for millions of people around the globe. For more information, please visit and . We offer a comprehensive benefits package designed to support your health, financial well-being, and work-life balance, including medical, prescription, dental, and vision coverage; FSA/HSA options; company-paid life and disability insurance; 401(k) with company match; paid time off (PTO) and holidays; annual bonus opportunities; an employee assistance program (EAP); and opportunities for career growth and advancement. Additional details will be provided during the hiring process. CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans. Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to .

Job Description Position Overview: This position oversees the management of all related areas of manufacturing to produce products and direct activities for cards and may include other related products. The responsibilities will be all approved products are manufactured on schedule, within the quality standards of the company and customer ensuring cost effective measures are implemented. Will ensure increased level of customer and employee satisfaction while improving efficiency of manpower, materials and equipment. The Production Manager will work onsite 5 days a week out of our office in Somerset, NJ from 6pm - 2:30am. Key Responsibilities: 1. Supervision • Assist senior staff members in the development and formulation of long and short-range planning, policies, programs and objectives., • Manages policy deployment in the areas of lean manufacturing techniques, quality, cost reduction, and on-time delivery., • Identifies, recommends and implements changes to improve productivity and reduce cost and scrap, monitor scrap and rework data. Directs the establishment, implementation and maintenance of production standards., • Hires, trains, develops and evaluates staff. Takes corrective action as necessary on a timely basis and in accordance with company policy. Ensures compliance with current federal, state and local regulations. Consults with Human Resources Department as appropriate., • Directs and monitors department supervisors to accomplish goals of the manufacturing plan consistent with established manufacturing and safety procedures., • Acts as a liaison between department supervisors and subordinate levels, as well as executive/department manager levels to inform personnel of communications, decisions, policies and all matters that affect performance, attitude and results., • Achieves optimum employee levels with least amount of overhead and raw material costs to meet annual budgetary plan., • Ensure efficient staffing and equipment utilization of all production equipment., • Ensure production schedule is adhered to and that operators are properly trained to perform their duties in a safe and efficient manner and in accordance with applicable quality standards., • Provides leadership for employee relations through effective communications, coaching, training and development. 2. Production • Responsible for all production of cards., • Ensure job work orders and production schedules are available and properly utilized by all production personnel., • Ensure all operating procedures are aligned with the company's safety and security programs. Maintain and promote safe practices and procedures. Other Important Responsibilities: • Develop an operator cross training program which optimizes labor availability and utilization., • Establish and maintain an operations dashboard of key performance indicators which provides the vehicle for department objectives and improvement initiatives such as process yield, on-time delivery, machine efficiency, etc., • Monitor production performance and make recommendations for improvement., • Will be required to perform other job functions, as assigned. Qualifications: • A minimum 10 years (or more) of relevant experience, • Ability to relate to employees and understand their needs., • Excellent communication skills, both oral and written., • Strong attention to detail and ability to self-check own work., • Excellent time management skills., • Task oriented excellent organizational skills, ability to prioritize work load;, • Enthusiastic attitude, cooperative team player, adaptable to new or changing circumstances, professional demeanor, sensitive to client needs, self-motivated, creative and innovative., • Excellent problem solving skills., • Proficient in Microsoft Office Suite. Physical requirements and work environment: • Must be able to lift 50 lbs;, • Must be able to sustain office work as needed including the following:, • Sitting/standing as needed, • Computer skills required, • Telephone usage, • Must be able to sustain factory work for 8+ hours per day as required including the following:, • Standing at machinery, • Reaching and pulling to operate machinery, • Sight for machinery operation, • Walking through shop, • For the most part, the position is exposed to ambient room temperatures, lighting and traditional office equipment as found in a typical office environment., • Production floor exposure that require the use of personal protective equipment (PPE) ie: safety glasses, hearing protection, gloves etc., • This job operates in a professional office environment. The role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machine. About CompoSecure CompoSecure, a GPGI business (NYSE: GPGI), is the leading manufacturer of Premium Metal Payment Cards and also offers best-in-class Authentication and Digital Asset solutions. The Company's offerings combine elegance, simplicity, and security to deliver exceptional experiences and peace of mind, enabling trust for millions of people around the globe. For more information, please visit and . We offer a comprehensive benefits package designed to support your health, financial well-being, and work-life balance, including medical, prescription, dental, and vision coverage; FSA/HSA options; company-paid life and disability insurance; 401(k) with company match; paid time off (PTO) and holidays; annual bonus opportunities; an employee assistance program (EAP); and opportunities for career growth and advancement. Additional details will be provided during the hiring process. CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans. Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to .

Customs and Border Protection Officer (CBPO) NEW RECRUITMENT INCENTIVES! U.S. Customs and Border Protection (CBP) offers those interested in a career in law enforcement an exceptional opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission of protecting America. You will be part of the Department of Homeland Security workforce, protecting American interests and securing our nation. If you are looking for a rewarding career with great pay, benefits, and job stability, now is the time to make your move. DON'T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW As a Customs and Border Protection Officer (CBPO) , you will be part of our 60,000 workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation's economic prosperity. Being a CBPO makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession. Typical assignments include: Enforcing customs, immigration, and agriculture laws and regulations. Facilitating the flow of legitimate trade and travel. Conducting inspections of individuals and conveyances. Determining the admissibility of individuals for entry into the United States; and Preventing the illegal entry of individuals and prohibited goods and the smuggling of illegal drugs and other contraband. Duty Locations – Incentives available for some locations You will be asked to provide your preference for one of the following mission-critical locations: Anchorage, AK; Douglas, Lukeville, Nogales and San Luis, AZ; Calexico, Otay Mesa, San Francisco, San Ysidro, and Tecate, CA; Washington, D.C.; Key West, Miami, and Orlando FL; Honolulu, HI; Chicago, IL; Calais, Eastport, Houlton, Jackman, Madawaska, Van Buren, and Vanceboro, ME; Detroit, Port Huron, and Sault Ste Marie, MI; Grand Portage and International Falls, MN; Raymond, Roosville, Sweetgrass, and Wild Horse, MT; Columbus and Santa Teresa, NM; Alexandria Bay, Champlain, Massena, Trout River, and Buffalo NY; Dunseith, Pembina, and Portal, ND; Brownsville, Dallas, Del Rio, El Paso, Hidalgo, Laredo, Presidio, Progreso and Houston, TX; Beecher Falls, Derby Line, Highgate Springs, Norton, and Richford, VT; Blaine, Oroville, and Sumas, WA. The preference locations listed above are expected to have vacancies available in the future, however, if the duty locations do not have vacancies at the time of your final offer, you may be offered a duty location in another geographic location within the United States. Locations offered are based on operational and mission requirements and critical agency hiring needs for entry-level CBPOs as determined by the CBP Office of Field Operations (OFO). Salary – and Duty Location Recruitment Incentives – and Benefits Recruitment Incentive Newly appointed Customs and Border Protection Officers (as defined in 5 CFR 575.102 ) will be offered up to a $15,000 incentive per year, for a three-year service contract, in the following locations: Arizona: Douglas, Lukeville, Nogales, San Luis California: Calexico Hawaii: Honolulu Maine: Calais, Eastport, Houlton, Jackman, Madawaska, Van Buren, Vanceboro Michigan: Detroit, Port Huron, Sault Sainte Marie Minnesota: Grand Portage, International Falls Montana: Raymond, Sweetgrass New York: Alexandria Bay, Champlain, Massena, Trout River North Dakota: Dunseith, Portal Vermont: Beecher Falls, Derby Line, Highgate Springs, Norton, Richford Washington: Blaine, Oroville Recruitment Incentive Newly appointed Customs and Border Protection Officers (as defined in 5 CFR 575.102 ) will be offered up to a $15,000 incentive per year, for a four-year service contract, in the following locations: California: Otay Mesa, San Francisco, San Ysidro, Tecate Florida: Key West North Dakota: Pembina Annual Base Salary for newly appointed CBPOs varies as follows: GS-9 $61,111 - $124,443 per year Locality pay varies by duty location. Note: A fully trained CBPO is eligible for up to $45,000 in overtime pay in addition to the starting salary. Grade level eligibility and salaries vary depending upon background, including experience and education, and duty location of the opportunity. This is a career ladder position with a grade level progression of GS-5, GS-7, GS-9, GS-11, and GS-12. You will be eligible for a promotion to the next higher grade level (without re-applying) once you successfully complete 52 weeks in each grade level. Promotions are at the discretion of the agency. Officers are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering. Qualifications: You qualify for the GS-9 grade level in one of the following ways: experience, education, or a combination of both. Experience: A minimum of one (1) year of specialized experience equivalent to at least the next lower grade level that includes: Detaining suspected violators of federal, state, or local laws and/or arresting violators using the proper law enforcement methods. Enforcing the laws and regulations relating to importing, exporting, and/or international shipping to and from the United States. Utilizing intelligence techniques and behavior analysis to identify potential threats and perform risk assessments for violations of laws and threats to national security. Conducting interviews in a law enforcement capacity for the purposes of gaining information from suspected violators of laws to determine the appropriate course of action. The above experience will be applied in connection with the following: Ability to make rapid, accurate judgments and decisions with respect to the application of the regulations, instructions, and procedures for importing and exporting merchandise to and from the United States; or enforcement and administration of laws relating to the right of persons to enter, reside in or depart from the United States, Guam, Puerto Rico, and the U.S. Virgin Islands. Education Substitution: A master's (or higher) degree, or two or more years of progressively higher-level graduate education leading to such a degree, or an LL.B. or J.D. from an accredited college or university; OR Combination of Experience and Education: A combination of specialized experience AND successfully completed graduate-level education. This will be calculated using your resume and official or unofficial transcripts submitted with your application. Other Requirements: Citizenship : You must be a U.S. Citizen to apply for this position. Residency : You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three (3) of the last five (5) years. Age Restriction : In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions. Candidates must be referred for selection to the Customs and Border Protection Officer position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03. The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d). Veterans' Preference : You may also be eligible for an excepted service Veterans Recruitment Appointment (VRA). The age restriction does not apply if you are Veterans' Preference eligible. Formal Training : You will be required to complete a paid pre-academy orientation for approximately two (2) weeks at your home port. You will then attend a 101-day training program – CBP Field Operations Academy – conducted at the Federal Law Enforcement Training Center (FLETC) located in Glynco, GA. This training consists of basic law enforcement skills, immigration laws, firearms training, examination of cargo/bags/merchandise, physical fitness, etc. Candidates assigned to the southern border, Miami, or Puerto Rico duty locations must attend and pass an online Spanish training program, which will be completed at their home port. Successful completion of the Academy is required for this position . How to Apply: Click the Apply button on this site. You will be linked to the CBP Talent Network page. For Position of Interest , select Customs and Border Protection Officer. You'll then receive a link(s) to the CBPO JOA(s) on USAJOBS to complete your application. Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit. You will be evaluated based on your resume, supporting documents, and the CBPO Entrance Exam. As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with OFO and CBP.

Job Description About CompoSecure Founded in 2000, CompoSecure is a technology partner to market leaders, fintechs and consumers enabling trust for millions of people around the globe. The company combines elegance, simplicity, and security to deliver exceptional experiences and peace of mind in the physical and digital world. CompoSecure's innovative payment card technology and metal cards with Arculus security and authentication capabilities deliver unique, premium branded experiences, enable people to access and use their financial and digital assets, and ensure trust at the point of a transaction. For more information, please visit and . Position Overview: This position is responsible for coordinating and directing the manufacturing process of all company products on the assigned line or department. Responsible for carrying out the production schedule requirements, utilizing available resources, in a manner which ensures the utmost safety, quality, efficiency and adherence to all company policies. Key Responsibilities: 1. Supervision • Supervision of all production personnel on assigned department., • Good communication with other shift Leads and Supervisors to ensure continuous smooth plant operation and high productivity., • Lead Lean Daily Management meetings at the beginning of each shift., • Ensure supervised staff is trained to perform their duties in a safe and efficient manner and in accordance with applicable quality standards., • Administer annual performance reviews in partnership with Shift Supervisor. Will also support and administer evaluations as part of the Company's Compensation Program., • Address and resolve employee related issues with HR guidance as needed., • Full support and participation in the success of the Preventive Maintenance Program and Safety (OSHA Compliance) programs., • Management of Paid Time Off Scheduling to ensure proper production coverage., • Holding employees accountable to following company policies and procedures., • Responsible for Visual/Labor Capture timekeeping output management., • Accurate Visual ERP transactions of raw materials in WIP., • Provide immediate feedback to Shift Supervisor or proper support teams on all issues with equipment/process, constraints and injuries. 2. Manufacturing • Ensure all employees are using the proper Personal Protection Equipment defined for use in their jobs., • Ensure employees are practicing safe working habits and report any and all accidents immediately., • Ensure employees are maintaining a clean, uncluttered work environment in their assigned area(s)., • Detail work assignments to the employees within the department to meet our delivery expectations., • Immediately highlight constraints to the department's ability to meet the scheduled production., • Perform spot checks, daily, on items such as first articles and visual rejects., • Ensure employees are trained to perform their duties in a safe, productive and accurate manner., • Will help the Shift Supervisor and other Department Leads as needed, in the form of staffing and projects., • Ensure department adherence to the Company's attendance, break, safety and other policies., • Provide feedback on department employees for use in employee performance evaluations., • Participate in department employee performance appraisals., • Operate equipment, as required. Other Important Responsibilities: • Timely Corrective Action response and resolution to relevant situations., • Engage and support companywide Safety and Cleanliness Programs., • As part of the EMS- Environment Management System, will meet compliance obligations and accountability by contributing but not limited to the company's recycling guidelines, proper waste and other environmental performance practices, • Functional knowledge of Microsoft Suite including Outlook and Excel, • Basic knowledge of ERP (Visual), • Will be required to perform other job functions, as assigned. Qualifications: • Minimum 2 years of people leadership experience, • High School Graduate preferred, • Ability to relate to employees and understand their needs, • Excellent communication skills, both oral and written (able to send email and be proficient in Microsoft Suite), • Basic PowerBI skills (searching database, viewing and understanding report, etc), • Strong attention to detail and ability to self-check own work, • Excellent time management skills, • Task oriented excellent organizational skills, ability to prioritize work load, • Enthusiastic attitude, cooperative team player, adaptable to new or changing circumstances, professional demeanor, self-motivated, creative and innovative, • Excellent problem-solving skills Physical requirements and work environment: • Must be able to lift 25/50 lbs;, • Must be able to sustain office work as needed including the following:, • Sitting in an office chair, • Typing, • Reaching for the telephone, • Standing at office equipment, • Hearing for phone use, • Sight for computer use, • Must be able to sustain factory work for 8+ hours per day including the following:, • Standing at machinery, • Reaching and pulling to operate machinery, • Sight for machinery operation, • Walking through shop, • Office environment is of moderate noise level., • Shop noise levels are such that protective ear-coverings are recommended. At CompoSecure, we believe in supporting our employees with a comprehensive benefits package that promotes health, financial well-being, and work-life balance. Our full-time team members enjoy access to: • Medical, Dental & Vision Coverage, • Flexible Spending Accounts (FSA), • Company-Paid Life and Disability Insurance, • 401(k) with Company Match, • Paid Time Off & Paid Holidays, • Annual Bonus Opportunities, • Employee Assistance Program (EAP) Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to . CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans.

Customs and Border Protection Officer (CBPO) NEW RECRUITMENT INCENTIVES! U.S. Customs and Border Protection (CBP) offers those interested in a career in law enforcement an exceptional opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission of protecting America. You will be part of the Department of Homeland Security workforce, protecting American interests and securing our nation. If you are looking for a rewarding career with great pay, benefits, and job stability, now is the time to make your move. DON'T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW As a Customs and Border Protection Officer (CBPO) , you will be part of our 60,000 workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation's economic prosperity. Being a CBPO makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession. Typical assignments include: Enforcing customs, immigration, and agriculture laws and regulations. Facilitating the flow of legitimate trade and travel. Conducting inspections of individuals and conveyances. Determining the admissibility of individuals for entry into the United States; and Preventing the illegal entry of individuals and prohibited goods and the smuggling of illegal drugs and other contraband. Duty Locations – Incentives available for some locations You will be asked to provide your preference for one of the following mission-critical locations: Anchorage, AK; Douglas, Lukeville, Nogales and San Luis, AZ; Calexico, Otay Mesa, San Francisco, San Ysidro, and Tecate, CA; Washington, D.C.; Key West, Miami, and Orlando FL; Honolulu, HI; Chicago, IL; Calais, Eastport, Houlton, Jackman, Madawaska, Van Buren, and Vanceboro, ME; Detroit, Port Huron, and Sault Ste Marie, MI; Grand Portage and International Falls, MN; Raymond, Roosville, Sweetgrass, and Wild Horse, MT; Columbus and Santa Teresa, NM; Alexandria Bay, Champlain, Massena, Trout River, and Buffalo NY; Dunseith, Pembina, and Portal, ND; Brownsville, Dallas, Del Rio, El Paso, Hidalgo, Laredo, Presidio, Progreso and Houston, TX; Beecher Falls, Derby Line, Highgate Springs, Norton, and Richford, VT; Blaine, Oroville, and Sumas, WA. The preference locations listed above are expected to have vacancies available in the future, however, if the duty locations do not have vacancies at the time of your final offer, you may be offered a duty location in another geographic location within the United States. Locations offered are based on operational and mission requirements and critical agency hiring needs for entry-level CBPOs as determined by the CBP Office of Field Operations (OFO). Salary – and Duty Location Recruitment Incentives – and Benefits Recruitment Incentive Newly appointed Customs and Border Protection Officers (as defined in 5 CFR 575.102 ) will be offered up to a $15,000 incentive per year, for a three-year service contract, in the following locations: Arizona: Douglas, Lukeville, Nogales, San Luis California: Calexico Hawaii: Honolulu Maine: Calais, Eastport, Houlton, Jackman, Madawaska, Van Buren, Vanceboro Michigan: Detroit, Port Huron, Sault Sainte Marie Minnesota: Grand Portage, International Falls Montana: Raymond, Sweetgrass New York: Alexandria Bay, Champlain, Massena, Trout River North Dakota: Dunseith, Portal Vermont: Beecher Falls, Derby Line, Highgate Springs, Norton, Richford Washington: Blaine, Oroville Recruitment Incentive Newly appointed Customs and Border Protection Officers (as defined in 5 CFR 575.102 ) will be offered up to a $15,000 incentive per year, for a four-year service contract, in the following locations: California: Otay Mesa, San Francisco, San Ysidro, Tecate Florida: Key West North Dakota: Pembina Annual Base Salary for newly appointed CBPOs varies as follows: GS-9 $61,111 - $124,443 per year Locality pay varies by duty location. Note: A fully trained CBPO is eligible for up to $45,000 in overtime pay in addition to the starting salary. Grade level eligibility and salaries vary depending upon background, including experience and education, and duty location of the opportunity. This is a career ladder position with a grade level progression of GS-5, GS-7, GS-9, GS-11, and GS-12. You will be eligible for a promotion to the next higher grade level (without re-applying) once you successfully complete 52 weeks in each grade level. Promotions are at the discretion of the agency. Officers are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering. Qualifications: You qualify for the GS-9 grade level in one of the following ways: experience, education, or a combination of both. Experience: A minimum of one (1) year of specialized experience equivalent to at least the next lower grade level that includes: Detaining suspected violators of federal, state, or local laws and/or arresting violators using the proper law enforcement methods. Enforcing the laws and regulations relating to importing, exporting, and/or international shipping to and from the United States. Utilizing intelligence techniques and behavior analysis to identify potential threats and perform risk assessments for violations of laws and threats to national security. Conducting interviews in a law enforcement capacity for the purposes of gaining information from suspected violators of laws to determine the appropriate course of action. The above experience will be applied in connection with the following: Ability to make rapid, accurate judgments and decisions with respect to the application of the regulations, instructions, and procedures for importing and exporting merchandise to and from the United States; or enforcement and administration of laws relating to the right of persons to enter, reside in or depart from the United States, Guam, Puerto Rico, and the U.S. Virgin Islands. Education Substitution: A master's (or higher) degree, or two or more years of progressively higher-level graduate education leading to such a degree, or an LL.B. or J.D. from an accredited college or university; OR Combination of Experience and Education: A combination of specialized experience AND successfully completed graduate-level education. This will be calculated using your resume and official or unofficial transcripts submitted with your application. Other Requirements: Citizenship : You must be a U.S. Citizen to apply for this position. Residency : You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three (3) of the last five (5) years. Age Restriction : In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions. Candidates must be referred for selection to the Customs and Border Protection Officer position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03. The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d). Veterans' Preference : You may also be eligible for an excepted service Veterans Recruitment Appointment (VRA). The age restriction does not apply if you are Veterans' Preference eligible. Formal Training : You will be required to complete a paid pre-academy orientation for approximately two (2) weeks at your home port. You will then attend a 101-day training program – CBP Field Operations Academy – conducted at the Federal Law Enforcement Training Center (FLETC) located in Glynco, GA. This training consists of basic law enforcement skills, immigration laws, firearms training, examination of cargo/bags/merchandise, physical fitness, etc. Candidates assigned to the southern border, Miami, or Puerto Rico duty locations must attend and pass an online Spanish training program, which will be completed at their home port. Successful completion of the Academy is required for this position . How to Apply: Click the Apply button on this site. You will be linked to the CBP Talent Network page. For Position of Interest , select Customs and Border Protection Officer. You'll then receive a link(s) to the CBPO JOA(s) on USAJOBS to complete your application. Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit. You will be evaluated based on your resume, supporting documents, and the CBPO Entrance Exam. As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with OFO and CBP.

Customs and Border Protection Officer (CBPO) NEW RECRUITMENT INCENTIVES! U.S. Customs and Border Protection (CBP) offers those interested in a career in law enforcement an exceptional opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission of protecting America. You will be part of the Department of Homeland Security workforce, protecting American interests and securing our nation. If you are looking for a rewarding career with great pay, benefits, and job stability, now is the time to make your move. DON'T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW As a Customs and Border Protection Officer (CBPO) , you will be part of our 60,000 workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation's economic prosperity. Being a CBPO makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession. Typical assignments include: Enforcing customs, immigration, and agriculture laws and regulations. Facilitating the flow of legitimate trade and travel. Conducting inspections of individuals and conveyances. Determining the admissibility of individuals for entry into the United States; and Preventing the illegal entry of individuals and prohibited goods and the smuggling of illegal drugs and other contraband. Duty Locations – Incentives available for some locations You will be asked to provide your preference for one of the following mission-critical locations: Anchorage, AK; Douglas, Lukeville, Nogales and San Luis, AZ; Calexico, Otay Mesa, San Francisco, San Ysidro, and Tecate, CA; Washington, D.C.; Key West, Miami, and Orlando FL; Honolulu, HI; Chicago, IL; Calais, Eastport, Houlton, Jackman, Madawaska, Van Buren, and Vanceboro, ME; Detroit, Port Huron, and Sault Ste Marie, MI; Grand Portage and International Falls, MN; Raymond, Roosville, Sweetgrass, and Wild Horse, MT; Columbus and Santa Teresa, NM; Alexandria Bay, Champlain, Massena, Trout River, and Buffalo NY; Dunseith, Pembina, and Portal, ND; Brownsville, Dallas, Del Rio, El Paso, Hidalgo, Laredo, Presidio, Progreso and Houston, TX; Beecher Falls, Derby Line, Highgate Springs, Norton, and Richford, VT; Blaine, Oroville, and Sumas, WA. The preference locations listed above are expected to have vacancies available in the future, however, if the duty locations do not have vacancies at the time of your final offer, you may be offered a duty location in another geographic location within the United States. Locations offered are based on operational and mission requirements and critical agency hiring needs for entry-level CBPOs as determined by the CBP Office of Field Operations (OFO). Salary – and Duty Location Recruitment Incentives – and Benefits Recruitment Incentive Newly appointed Customs and Border Protection Officers (as defined in 5 CFR 575.102 ) will be offered up to a $15,000 incentive per year, for a three-year service contract, in the following locations: Arizona: Douglas, Lukeville, Nogales, San Luis California: Calexico Hawaii: Honolulu Maine: Calais, Eastport, Houlton, Jackman, Madawaska, Van Buren, Vanceboro Michigan: Detroit, Port Huron, Sault Sainte Marie Minnesota: Grand Portage, International Falls Montana: Raymond, Sweetgrass New York: Alexandria Bay, Champlain, Massena, Trout River North Dakota: Dunseith, Portal Vermont: Beecher Falls, Derby Line, Highgate Springs, Norton, Richford Washington: Blaine, Oroville Recruitment Incentive Newly appointed Customs and Border Protection Officers (as defined in 5 CFR 575.102 ) will be offered up to a $15,000 incentive per year, for a four-year service contract, in the following locations: California: Otay Mesa, San Francisco, San Ysidro, Tecate Florida: Key West North Dakota: Pembina Annual Base Salary for newly appointed CBPOs varies as follows: GS-9 $61,111 - $124,443 per year Locality pay varies by duty location. Note: A fully trained CBPO is eligible for up to $45,000 in overtime pay in addition to the starting salary. Grade level eligibility and salaries vary depending upon background, including experience and education, and duty location of the opportunity. This is a career ladder position with a grade level progression of GS-5, GS-7, GS-9, GS-11, and GS-12. You will be eligible for a promotion to the next higher grade level (without re-applying) once you successfully complete 52 weeks in each grade level. Promotions are at the discretion of the agency. Officers are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering. Qualifications: You qualify for the GS-9 grade level in one of the following ways: experience, education, or a combination of both. Experience: A minimum of one (1) year of specialized experience equivalent to at least the next lower grade level that includes: Detaining suspected violators of federal, state, or local laws and/or arresting violators using the proper law enforcement methods. Enforcing the laws and regulations relating to importing, exporting, and/or international shipping to and from the United States. Utilizing intelligence techniques and behavior analysis to identify potential threats and perform risk assessments for violations of laws and threats to national security. Conducting interviews in a law enforcement capacity for the purposes of gaining information from suspected violators of laws to determine the appropriate course of action. The above experience will be applied in connection with the following: Ability to make rapid, accurate judgments and decisions with respect to the application of the regulations, instructions, and procedures for importing and exporting merchandise to and from the United States; or enforcement and administration of laws relating to the right of persons to enter, reside in or depart from the United States, Guam, Puerto Rico, and the U.S. Virgin Islands. Education Substitution: A master's (or higher) degree, or two or more years of progressively higher-level graduate education leading to such a degree, or an LL.B. or J.D. from an accredited college or university; OR Combination of Experience and Education: A combination of specialized experience AND successfully completed graduate-level education. This will be calculated using your resume and official or unofficial transcripts submitted with your application. Other Requirements: Citizenship : You must be a U.S. Citizen to apply for this position. Residency : You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three (3) of the last five (5) years. Age Restriction : In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions. Candidates must be referred for selection to the Customs and Border Protection Officer position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03. The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d). Veterans' Preference : You may also be eligible for an excepted service Veterans Recruitment Appointment (VRA). The age restriction does not apply if you are Veterans' Preference eligible. Formal Training : You will be required to complete a paid pre-academy orientation for approximately two (2) weeks at your home port. You will then attend a 101-day training program – CBP Field Operations Academy – conducted at the Federal Law Enforcement Training Center (FLETC) located in Glynco, GA. This training consists of basic law enforcement skills, immigration laws, firearms training, examination of cargo/bags/merchandise, physical fitness, etc. Candidates assigned to the southern border, Miami, or Puerto Rico duty locations must attend and pass an online Spanish training program, which will be completed at their home port. Successful completion of the Academy is required for this position . How to Apply: Click the Apply button on this site. You will be linked to the CBP Talent Network page. For Position of Interest , select Customs and Border Protection Officer. You'll then receive a link(s) to the CBPO JOA(s) on USAJOBS to complete your application. Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit. You will be evaluated based on your resume, supporting documents, and the CBPO Entrance Exam. As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with OFO and CBP.

Customs and Border Protection Officer (CBPO) NEW RECRUITMENT INCENTIVES! U.S. Customs and Border Protection (CBP) offers those interested in a career in law enforcement an exceptional opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission of protecting America. You will be part of the Department of Homeland Security workforce, protecting American interests and securing our nation. If you are looking for a rewarding career with great pay, benefits, and job stability, now is the time to make your move. DON'T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW As a Customs and Border Protection Officer (CBPO) , you will be part of our 60,000 workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation's economic prosperity. Being a CBPO makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession. Typical assignments include: Enforcing customs, immigration, and agriculture laws and regulations. Facilitating the flow of legitimate trade and travel. Conducting inspections of individuals and conveyances. Determining the admissibility of individuals for entry into the United States; and Preventing the illegal entry of individuals and prohibited goods and the smuggling of illegal drugs and other contraband. Duty Locations – Incentives available for some locations You will be asked to provide your preference for one of the following mission-critical locations: Anchorage, AK; Douglas, Lukeville, Nogales and San Luis, AZ; Calexico, Otay Mesa, San Francisco, San Ysidro, and Tecate, CA; Washington, D.C.; Key West, Miami, and Orlando FL; Honolulu, HI; Chicago, IL; Calais, Eastport, Houlton, Jackman, Madawaska, Van Buren, and Vanceboro, ME; Detroit, Port Huron, and Sault Ste Marie, MI; Grand Portage and International Falls, MN; Raymond, Roosville, Sweetgrass, and Wild Horse, MT; Columbus and Santa Teresa, NM; Alexandria Bay, Champlain, Massena, Trout River, and Buffalo NY; Dunseith, Pembina, and Portal, ND; Brownsville, Dallas, Del Rio, El Paso, Hidalgo, Laredo, Presidio, Progreso and Houston, TX; Beecher Falls, Derby Line, Highgate Springs, Norton, and Richford, VT; Blaine, Oroville, and Sumas, WA. The preference locations listed above are expected to have vacancies available in the future, however, if the duty locations do not have vacancies at the time of your final offer, you may be offered a duty location in another geographic location within the United States. Locations offered are based on operational and mission requirements and critical agency hiring needs for entry-level CBPOs as determined by the CBP Office of Field Operations (OFO). Salary – and Duty Location Recruitment Incentives – and Benefits Recruitment Incentive Newly appointed Customs and Border Protection Officers (as defined in 5 CFR 575.102 ) will be offered up to a $15,000 incentive per year, for a three-year service contract, in the following locations: Arizona: Douglas, Lukeville, Nogales, San Luis California: Calexico Hawaii: Honolulu Maine: Calais, Eastport, Houlton, Jackman, Madawaska, Van Buren, Vanceboro Michigan: Detroit, Port Huron, Sault Sainte Marie Minnesota: Grand Portage, International Falls Montana: Raymond, Sweetgrass New York: Alexandria Bay, Champlain, Massena, Trout River North Dakota: Dunseith, Portal Vermont: Beecher Falls, Derby Line, Highgate Springs, Norton, Richford Washington: Blaine, Oroville Recruitment Incentive Newly appointed Customs and Border Protection Officers (as defined in 5 CFR 575.102 ) will be offered up to a $15,000 incentive per year, for a four-year service contract, in the following locations: California: Otay Mesa, San Francisco, San Ysidro, Tecate Florida: Key West North Dakota: Pembina Annual Base Salary for newly appointed CBPOs varies as follows: GS-9 $61,111 - $124,443 per year Locality pay varies by duty location. Note: A fully trained CBPO is eligible for up to $45,000 in overtime pay in addition to the starting salary. Grade level eligibility and salaries vary depending upon background, including experience and education, and duty location of the opportunity. This is a career ladder position with a grade level progression of GS-5, GS-7, GS-9, GS-11, and GS-12. You will be eligible for a promotion to the next higher grade level (without re-applying) once you successfully complete 52 weeks in each grade level. Promotions are at the discretion of the agency. Officers are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering. Qualifications: You qualify for the GS-9 grade level in one of the following ways: experience, education, or a combination of both. Experience: A minimum of one (1) year of specialized experience equivalent to at least the next lower grade level that includes: Detaining suspected violators of federal, state, or local laws and/or arresting violators using the proper law enforcement methods. Enforcing the laws and regulations relating to importing, exporting, and/or international shipping to and from the United States. Utilizing intelligence techniques and behavior analysis to identify potential threats and perform risk assessments for violations of laws and threats to national security. Conducting interviews in a law enforcement capacity for the purposes of gaining information from suspected violators of laws to determine the appropriate course of action. The above experience will be applied in connection with the following: Ability to make rapid, accurate judgments and decisions with respect to the application of the regulations, instructions, and procedures for importing and exporting merchandise to and from the United States; or enforcement and administration of laws relating to the right of persons to enter, reside in or depart from the United States, Guam, Puerto Rico, and the U.S. Virgin Islands. Education Substitution: A master's (or higher) degree, or two or more years of progressively higher-level graduate education leading to such a degree, or an LL.B. or J.D. from an accredited college or university; OR Combination of Experience and Education: A combination of specialized experience AND successfully completed graduate-level education. This will be calculated using your resume and official or unofficial transcripts submitted with your application. Other Requirements: Citizenship : You must be a U.S. Citizen to apply for this position. Residency : You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three (3) of the last five (5) years. Age Restriction : In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions. Candidates must be referred for selection to the Customs and Border Protection Officer position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03. The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d). Veterans' Preference : You may also be eligible for an excepted service Veterans Recruitment Appointment (VRA). The age restriction does not apply if you are Veterans' Preference eligible. Formal Training : You will be required to complete a paid pre-academy orientation for approximately two (2) weeks at your home port. You will then attend a 101-day training program – CBP Field Operations Academy – conducted at the Federal Law Enforcement Training Center (FLETC) located in Glynco, GA. This training consists of basic law enforcement skills, immigration laws, firearms training, examination of cargo/bags/merchandise, physical fitness, etc. Candidates assigned to the southern border, Miami, or Puerto Rico duty locations must attend and pass an online Spanish training program, which will be completed at their home port. Successful completion of the Academy is required for this position . How to Apply: Click the Apply button on this site. You will be linked to the CBP Talent Network page. For Position of Interest , select Customs and Border Protection Officer. You'll then receive a link(s) to the CBPO JOA(s) on USAJOBS to complete your application. Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit. You will be evaluated based on your resume, supporting documents, and the CBPO Entrance Exam. As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with OFO and CBP.

Job Description Position Overview: This position is responsible for ensuring the accurate and timely execution of all prototype, small production, and R&D orders. Will direct shift leads, prototype operators within the group, and secures coordination with production and research engineers as necessary. This position will also ensure that any and all operational parameters and key production attributes are documented and the results summarized for distribution to the Chief Innovation Officer, Product Development Manager, Manufacturing Director, Quality Manager and Client Engineering Manager. Key Responsibilities: • Directs shift leads as well as team operators in the manufacture of prototypes, small production, and R&D orders., • Ensure that all production processes such as lamination, CNC operations, engraving, stamping, and chip embedding are completed by prototype operators as specified and that all equipment parameters, recipes, and key attributes are documented., • Coordinate operations between shifts to assure consistent quality and documentation, including directing leads on both shifts., • Assure that troubleshooting documentation is completed and communicated to relevant parties., • Commit to and meet delivery dates for prototype orders and confirm that scheduling database is maintained., • Immediate documentation and notification to the Product Development Manager on processing or quality issues and how they were resolved., • Ensure all employees are:, • Using the proper Personal Protection Equipment defined for use in their jobs, • Trained to perform their duties in a safe, productive and accurate manner, • Practicing safe working habits, • Reporting any and all accidents immediately, • Ensure department adherence to the Company's attendance, break, safety and other policies., • Conduct employee performance evaluations for team., • Oversee other operations within the responsibility of the Prototype Team., • Secure other operations under the management of production. Other Important Responsibilities: • Assist production when prototype orders are not present., • Timely Corrective Action response and resolution to relevant project situations., • Engage and support companywide Safety and Cleanliness programs., • Will be required to perform other job functions, as assigned. Qualifications: • Minimum 3 years of experience in a manufacturing environment involving prototype products, • High School Diploma or GED is required, • Excellent communication skills, both oral and written, • Strong attention to detail and ability to self-check own work, • Excellent problem-solving and time management skills, • Task oriented excellent organizational skills, ability to prioritize work load, • Enthusiastic attitude, cooperative team player, adaptable to new or changing circumstances, professional demeanor, sensitive to client needs, self-motivated, creative and innovative, • Accountability – Ability to accept responsibility and account for his/her actions, • Conceptual Thinking – Ability to think in terms of abstract ideas, • High level of computer literacy including working knowledge of Microsoft Office applications and Outlook Physical requirements and work environment: • Must be able to lift 20 lbs;, • Must be able to sustain office work for 8+ hours per day including the following:, • Sitting in an office chair, • Typing, • Reaching for the telephone, • Standing at office equipment, • Hearing for phone use, • Sight for computer use, • Must be able to sustain factory work as needed including the following:, • Standing at machinery, • Reaching and pulling to operate machinery, • Sight for machinery operation, • Walking through shop, • Office environment is of moderate noise level., • Shop noise levels are such that protective ear-coverings are recommended. About CompoSecure CompoSecure, a GPGI business (NYSE: GPGI), is the leading manufacturer of Premium Metal Payment Cards and also offers best-in-class Authentication and Digital Asset solutions. The Company's offerings combine elegance, simplicity, and security to deliver exceptional experiences and peace of mind, enabling trust for millions of people around the globe. For more information, please visit and . We offer a comprehensive benefits package designed to support your health, financial well-being, and work-life balance, including medical, prescription, dental, and vision coverage; FSA/HSA options; company-paid life and disability insurance; 401(k) with company match; paid time off (PTO) and holidays; annual bonus opportunities; an employee assistance program (EAP); and opportunities for career growth and advancement. Additional details will be provided during the hiring process. CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans. Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to .

Job Description Position Overview: This position is responsible for the set-up, repair, preventative maintenance, and operation of equipment to achieve production goals with a high level of detail and accuracy. Key Responsibilities: • Primary trainer for new hires in machine operation including documenting the training., • Lead the productivity, maintenance, and quality of the Muhlbauer equipment., • Complete responsibility of machine start-up, shut down and changeover., • Understand what the expectations are of a work order., • Set up machines as required for specific jobs including new programs, as needed., • Observe machine operations to verify accuracy of machine settings while producing a top-quality product., • Detect malfunctions or out-or-tolerance conditions., • Use precision measuring instruments such as drop gauges and push testers when setting up or adjusting machines., • Inspect "first part" and inspect work pieces throughout the production run for out-or-tolerance conditions., • Ensure Preventative Maintenance is completed and spare parts inventories are maintained., • Pull required fixtures, holding devices and materials, as required., • Minor repairs of machine within capability., • Ensure all documentation is completed properly including, computer logs, maintenance logs and accountability logs. Other Important Responsibilities: • Must be able to operate assigned equipment safely and efficiently., • Must be able to keep record of time spent and materials used., • Must be able to use precision measuring tools and equipment, read schematics, and is familiar with common measuring tools., • Timely Corrective Action response and resolution to relevant situations., • Engage and support companywide Safety and Cleanliness Programs., • Must maintain adequate levels of performance and motivation despite job tasks that are routine, repetitive and/or non-stimulating., • As part of the EMS- Environment Management System, will meet compliance obligations and accountability by contributing but not limited to the company's recycling guidelines, proper waste and other environmental performance practices, • As part of the EMS- Environment Management System, will meet compliance obligations and accountability by contributing but not limited to the company's recycling guidelines, proper waste and other environmental performance practices, • Will be required to perform other job functions, as assigned Qualifications: • A minimum 5 years or more of relevant experience, • High School or GED Diploma required, Technical School Certification/Degree Preferred, • Ability to independently troubleshoot mechanical and electrical problems using schematics and diagnostic equipment., • Must have knowledge of mathematical skills with all units of measure, using whole numbers, common fractions and decimals, • Must be capable of programming, setting up and maintaining various equipment, • Competencies with pneumatic technology and hydraulics, • Must be able to work with limited supervision and function as a member of a customer-driven quality team whose goal is to ensure that product quality requirements established by the customer have been achieved, • Must hold themselves accountable for doing whatever is needed to meet customer commitments, • Must be able to understand and carry out oral and written directives, • Must have the ability to work under pressure and to adhere to deadlines and to have the ability to be flexible, • Task oriented, ability to prioritize work load, • Enthusiastic attitude, cooperative team player, adaptable to new or changing circumstances, professional demeanor, self-motivated, creative and innovative Physical requirements and work environment: • Must be able to lift 50 lbs, • Must be able to sustain physical work for up to 12 hours per day including the following:, • Standing for up to 12 hours per day, • Reaching and pulling, • Sight, • Walking through shop, • Bending, climbing and crouching., • Shop noise levels are such that protective ear-coverings are recommended, • Short notice, overtime and some weekend demand according to production needs About CompoSecure CompoSecure, a GPGI business (NYSE: GPGI), is the leading manufacturer of Premium Metal Payment Cards and also offers best-in-class Authentication and Digital Asset solutions. The Company's offerings combine elegance, simplicity, and security to deliver exceptional experiences and peace of mind, enabling trust for millions of people around the globe. For more information, please visit and . We offer a comprehensive benefits package designed to support your health, financial well-being, and work-life balance, including medical, prescription, dental, and vision coverage; FSA/HSA options; company-paid life and disability insurance; 401(k) with company match; paid time off (PTO) and holidays; annual bonus opportunities; an employee assistance program (EAP); and opportunities for career growth and advancement. Additional details will be provided during the hiring process. CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans. Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to .

Job Description About CompoSecure Founded in 2000, CompoSecure is a technology partner to market leaders, fintechs and consumers enabling trust for millions of people around the globe. The company combines elegance, simplicity, and security to deliver exceptional experiences and peace of mind in the physical and digital world. CompoSecure's innovative payment card technology and metal cards with Arculus security and authentication capabilities deliver unique, premium branded experiences, enable people to access and use their financial and digital assets, and ensure trust at the point of a transaction. For more information, please visit and . Position Overview: We are seeking an experienced and visionary Vice President, Advanced Manufacturing Engineering to lead our automation initiatives across various manufacturing processes. The successful candidate will have a strong background in industrial manufacturing, with a proven track record in automation deployment within industries such as packaging, automotive, space, or manufacturing. This role is integral to driving efficiency and scale and enhancing the overall productivity of our operations. Key Responsibilities: • Automation Strategy & Roadmap: Develop and own the automation roadmap, ensuring alignment with business goals and objectives. Focus on end-to-end process automation from raw material handling to final packaging., • Process Improvement & Innovation: Identify, design, and implement automation & manufacturing technology solutions to improve existing manual processes, enhance efficiency, and reduce costs., • Leadership & Team Building: Build and lead an automation team, providing guidance, mentorship, and support. Collaborate with cross-functional teams to ensure successful project execution., • Project Management: Oversee the planning, execution, and delivery of automation projects, ensuring they are completed on time and within budget. Manage a project delivery cycle of 12-18 months., • Technical Expertise: Apply deep knowledge of robotics and mechanical engineering to design, iterate, and deploy automation systems. Ensure the integration of new and existing equipment., • Business Impact & Metrics: Establish and track outcome metrics to measure the effectiveness of automation initiatives. Focus on reducing labor costs per unit and overall operational efficiency., • Stakeholder Engagement: Work closely with senior management to align automation efforts with strategic business goals. Communicate progress, challenges, and successes effectively. Qualifications: • Bachelor's degree in Mechanical Engineering; Master's degree preferred., • A minimum of 7-10 years (or more) relevant experience in automation and/or industrial manufacturing deployment within packaging, automotive, space, or manufacturing industries. Experience in mid-management or lead roles, overseeing automation projects and teams., • Strong understanding of robotics and mechanical engineering principles., • Proven experience in process improvement and automation implementation., • Excellent project management skills with a track record of delivering complex projects., • Strong leadership and team-building abilities., • Exceptional communication and interpersonal skills., • Holistic mindset with the ability to understand the broader business impact of automation initiatives., • Enthusiastic, innovative, and results-driven with a commitment to excellence At CompoSecure, we believe in supporting our employees with a comprehensive benefits package that promotes health, financial well-being, and work-life balance. Our full-time team members enjoy access to: • Medical, Dental & Vision Coverage, • Flexible Spending Accounts (FSA), • Company-Paid Life and Disability Insurance, • 401(k) with Company Match, • Paid Time Off & Paid Holidays, • Annual Bonus Opportunities, • Employee Assistance Program (EAP), • Career Advancement Opportunities Benefits eligibility and details will be shared during the hiring process. We're excited to support you in building a rewarding career with us. Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to . CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans.

Job Description About CompoSecure CompoSecure, a GPGI business (NYSE: GPGI), is the leading manufacturer of Premium Metal Payment Cards and also offers best-in-class Authentication and Digital Asset solutions. The Company's offerings combine elegance, simplicity, and security to deliver exceptional experiences and peace of mind, enabling trust for millions of people around the globe. For more information, please visit and . Position Overview: This position is responsible for the set-up, repair, preventative maintenance, and operation of equipment to achieve production goals with a high level of detail and accuracy. Key Responsibilities: • Primary trainer for new hires in machine operation including documenting the training., • Lead the productivity, maintenance, and quality of the Muhlbauer equipment., • Complete responsibility of machine start-up, shut down and changeover., • Understand what the expectations are of a work order., • Set up machines as required for specific jobs including new programs, as needed., • Observe machine operations to verify accuracy of machine settings while producing a top-quality product., • Detect malfunctions or out-or-tolerance conditions., • Use precision measuring instruments such as drop gauges and push testers when setting up or adjusting machines., • Inspect "first part" and inspect work pieces throughout the production run for out-or-tolerance conditions., • Ensure Preventative Maintenance is completed and spare parts inventories are maintained., • Pull required fixtures, holding devices and materials, as required., • Minor repairs of machine within capability., • Ensure all documentation is completed properly including, computer logs, maintenance logs and accountability logs. Other Important Responsibilities: • Must be able to operate assigned equipment safely and efficiently., • Must be able to keep record of time spent and materials used., • Must be able to use precision measuring tools and equipment, read schematics, and is familiar with common measuring tools., • Timely Corrective Action response and resolution to relevant situations., • Engage and support companywide Safety and Cleanliness Programs., • Must maintain adequate levels of performance and motivation despite job tasks that are routine, repetitive and/or non-stimulating., • As part of the EMS- Environment Management System, will meet compliance obligations and accountability by contributing but not limited to the company's recycling guidelines, proper waste and other environmental performance practices, • As part of the EMS- Environment Management System, will meet compliance obligations and accountability by contributing but not limited to the company's recycling guidelines, proper waste and other environmental performance practices, • Will be required to perform other job functions, as assigned Qualifications: • A minimum 5 years or more of relevant experience, • High School or GED Diploma required, Technical School Certification/Degree Preferred, • Ability to independently troubleshoot mechanical and electrical problems using schematics and diagnostic equipment., • Must have knowledge of mathematical skills with all units of measure, using whole numbers, common fractions and decimals, • Must be capable of programming, setting up and maintaining various equipment, • Competencies with pneumatic technology and hydraulics, • Must be able to work with limited supervision and function as a member of a customer-driven quality team whose goal is to ensure that product quality requirements established by the customer have been achieved, • Must hold themselves accountable for doing whatever is needed to meet customer commitments, • Must be able to understand and carry out oral and written directives, • Must have the ability to work under pressure and to adhere to deadlines and to have the ability to be flexible, • Task oriented, ability to prioritize work load, • Enthusiastic attitude, cooperative team player, adaptable to new or changing circumstances, professional demeanor, self-motivated, creative and innovative Physical requirements and work environment: • Must be able to lift 50 lbs, • Must be able to sustain physical work for up to 12 hours per day including the following:, • Standing for up to 12 hours per day, • Reaching and pulling, • Sight, • Walking through shop, • Bending, climbing and crouching., • Shop noise levels are such that protective ear-coverings are recommended, • Medical, Dental & Vision Coverage, • Flexible Spending Accounts (FSA), • Company-Paid Life and Disability Insurance, • 401(k) with Company Match, • Paid Time Off & Paid Holidays, • Annual Bonus Opportunities, • Employee Assistance Program (EAP), • Career Advancement Opportunities Benefits eligibility and details will be shared during the hiring process. We're excited to support you in building a rewarding career with us. Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to . CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans.

Job Description Position Overview: We're looking for a Manager, Cybersecurity who can run our SOC operations, vulnerability management, DFIR, and security tool health - while also managing our MSSP/MDR partners, running red team engagements, and integrating cyber threat intelligence into daily operations. This is not a checkbox role. You'll be the frontline leader making sure our defenses are sharp, our partners deliver value, and our playbooks are battle-tested. The Cybersecurity Manager will be expected to work on-site five days a week in our Somerset, NJ office. Key Responsibilities: • SOC & Security Operations, • Run day-to-day SOC ops (monitoring, alert triage, escalation), • Manage MSSP/MDR relationships - hold vendors accountable, ensure quality, and drive outcomes, • Ensure 24/7 coverage through smart playbook design and partner integration, • Vulnerability Management, • Own the vuln management lifecycle: scanning, prioritization, patching, reporting, • Work with IT/DevOps to ensure remediation sticks, not just tickets get closed, • Report enterprise risk posture and trendlines directly to leadership, • Threat Intel & Red Teaming, • Lead coordination of red team and purple team exercises to test resilience and validate controls, • Integrate Cyber Threat Intelligence (CTI) into SOC processes - from IOCs to TTPs, • Run threat hunting campaigns based on MITRE ATT&CK and emerging intel, • Security Tooling & AI/ML, • Deploy and maintain enterprise tools (SIEM, EDR, WAF, scanners, SOAR, etc.), • Ensure tools are tuned, integrated, and delivering value - not shelfware, • Explore AI/ML anomaly detection and automation opportunities to stay ahead of threats, • Digital Forensics & Incident Response (DFIR), • Lead investigations end-to-end - endpoints, servers, cloud, and OT/ICS when needed, • Run tabletops, refine playbooks, and ensure incident readiness, • Mentor analysts in forensics, hunting, and response, • Team Development & Coaching, • Lead the professional growth of SOC analysts and cybersecurity team members through regular coaching, feedback, and development plans. Foster a culture of continuous learning and skill advancement., • Empower team members to take ownership of key initiatives, encouraging autonomy and accountability in daily operations and incident response. Qualifications: • Required, • A minimum of 7 years (or more) in cybersecurity ops, with 3+ in a lead or senior role, • SOC management and vendor/MSSP oversight experience, • Proven vulnerability management success across hybrid environments, • Hands-on with SIEM, EDR, • Solid DFIR skillset: log/memory/packet forensics, endpoint investigations, hunt operations, • Experience coordinating red team engagements and actioning results, • Strong communicator: can brief execs and mentor juniors, • Preferred, • Threat intel analysis and integration experience, • Cloud security ops in AWS/Azure, • Certifications: GCIA, GCFA, GCIH, CISSP, CISM, • Financial services or manufacturing sector experience About CompoSecure CompoSecure, a GPGI business (NYSE: GPGI), is the leading manufacturer of Premium Metal Payment Cards and also offers best-in-class Authentication and Digital Asset solutions. The Company's offerings combine elegance, simplicity, and security to deliver exceptional experiences and peace of mind, enabling trust for millions of people around the globe. For more information, please visit and . We offer a comprehensive benefits package designed to support your health, financial well-being, and work-life balance, including medical, prescription, dental, and vision coverage; FSA/HSA options; company-paid life and disability insurance; 401(k) with company match; paid time off (PTO) and holidays; annual bonus opportunities; an employee assistance program (EAP); and opportunities for career growth and advancement. Additional details will be provided during the hiring process. CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans. Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to .

Job Description Quality Engineer About CompoSecure Founded in 2000, CompoSecure (NYSE: CMPO) is a technology partner to market leaders, fintechs and consumers enabling trust for millions of people around the globe. The company combines elegance, simplicity, and security to deliver exceptional experiences and peace of mind in the physical and digital world. CompoSecure's innovative payment card technology and metal cards with Arculus security and authentication capabilities deliver unique, premium branded experiences, enable people to access and use their financial and digital assets, and ensure trust at the point of a transaction. For more information, please visit and . Position Overview: This position is responsible for the documentation and follow-through of all external, internal or supplier non-conformities and for the creation, documentation, document retention and dissemination of all product or customer specific acceptance criteria. A related responsibility is the coordination of internal quality training projects, including general communication of root cause and corrective action to originating process and follow up on correction actions and acceptance criteria. In addition, this position is responsible to assess individual process acceptance criteria, modify or create the same when necessary and train operators in its use. Responsible for all quality communications with internal departments, outside vendors, card associations and customers at the direction of Management. Key Responsibilities: • Develop, document and maintain the document retention of all Product and/or Customer specific acceptance criteria., • Define and/or understand acceptable limits for output quality at each production process., • Document output quality limits for each production process and create guides for ease or understanding of these limits by the operators., • Assess the application and effectiveness of process output quality by operators., • Record, assign and follow-up on all internal, supplier and external non-conformity reports., • Log and report on all non-conformances., • Responsible for Quality System development and maintenance., • Provide timely corrective action responses and resolutions to all quality situations. Other Important Responsibilities: • Incoming control of material and sub-contractor goods, as needed., • Develop, implement and maintain Quality System procedures, work instructions and forms, as required., • Establish, document and maintain the calibration program for all test equipment and necessary production equipment., • Participate in the management of material and sub-contractor specifications., • Participate in weekly project update meetings regarding New Product Design projects as it relates to quality procedures., • Handle related email correspondence and fill in on follow-up items when other office personnel are absent (as needed)., • Other miscellaneous duties as assigned. Qualifications: • A minimum 5 to 10 years (or more) of relevant experience, • Bachelor's Degree in any Engineering, Science or Mathematics discipline, a plus., • ASQ certifications in Quality Management, tools, etc., a plus., • Educational focus on statistics, a plus., • Ability to relate to employees and understand their needs;, • Excellent communication skills, both oral and written;, • Strong attention to detail and ability to self-check own work;, • Excellent time management skills;, • Task oriented excellent organizational skills, ability to prioritize work load;, • Enthusiastic attitude, cooperative team player, adaptable to new or changing circumstances, professional demeanor, sensitive to client needs, self-motivated, creative and innovative;, • Excellent problem solving skills; and, • High level of computer literacy including working knowledge of Microsoft Office applications, Project, Visio and Outlook. Physical requirements and work environment: • Must be able to lift 50 lbs;, • Must be able to sustain office work for 8+ house per day including the following:, • Sitting in an office chair, • Typing, • Reaching for the telephone, • Standing at office equipment, • Hearing for phone use, • Sight for computer use, • Must be able to sustain factory work as needed including the following:, • Standing at machinery, • Reaching and pulling to operate machinery, • Sight for machinery operation, • Walking through shop, • Office environment is of moderate noise level., • Shop noise levels are such that protective ear-coverings are recommended., • Medical, Dental & Vision Coverage, • Flexible Spending Accounts (FSA), • Company-Paid Life and Disability Insurance, • 401(k) with Company Match, • Paid Time Off & Paid Holidays, • Annual Bonus Opportunities, • Employee Assistance Program (EAP), • Career Advancement Opportunities Benefits eligibility and details will be shared during the hiring process. We're excited to support you in building a rewarding career with us. Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to . CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans.

Job Description About CompoSecure CompoSecure, a GPGI business (NYSE: GPGI), is the leading manufacturer of Premium Metal Payment Cards and also offers best-in-class Authentication and Digital Asset solutions. The Company's offerings combine elegance, simplicity, and security to deliver exceptional experiences and peace of mind, enabling trust for millions of people around the globe. For more information, please visit and . Position Overview: The overall responsibilities of this position will be for all company locations to develop, implement, monitor and revise as necessary, all aspects of the company accountability auditing procedures to ensure compliance with requirements stipulated by PCI (Plastic Card Industry) physical security requirements required by secure card issuance authorities, i.e., Visa, MasterCard, American Express, etc. Due to the nature of this position, only the strictest of confidentiality will be tolerated. Key Responsibilities: • Leads the accountability team within the accountability auditing operations, • Ensure staff is trained in all aspect of the accountability operation, • Ensure physical security PCI auditing compliance for the designated shift, • Maintain all auditing policies, procedures, and practices, • Oversee the secure card auditing system while maintaining a full traceability system of all secure card products for the shift, • Ensure the integrity of all work-in-progress, finished goods, and destruction of secure materials., • Ensure corrective actions are taken for auditing miscounts to and from all clients and vendors. Report all actions to the Card Auditing Supervisor, • Maintain communications with the Management team through a monthly reporting system, • Will consistently maintain a level of confidentiality for all accountability related matters, • Will assist in providing audit documentation prior to and during all PCI audits Other Important Responsibilities: • Timely corrective action response and resolution to all card security situations., • Engage and support companywide safety and cleanliness programs., • Handle related email correspondence and fill in on follow-ups when other Auditing Leads are absent (as needed)., • Will operate as a Card Accountability Auditor when necessary, • Communication of all Safety and Security policies, procedures and practices are maintained at all locations for consistency where applicable., • As part of the EMS- Environment Management System, will meet compliance obligations and accountability by contributing but not limited to the company's recycling guidelines, proper waste and other environmental performance practices, • Will be required to perform other job functions, as assigned Qualifications: • 5 years of experience banking or an accountability related function preferred, • Ability to relate to employees and understand their needs and must maintain a level of confidentiality, • Excellent communication skills, both oral and written, • Strong attention to detail and ability to self-check own work, • Excellent time management skills, • Task oriented excellent organizational skills, ability to prioritize work load, • Enthusiastic attitude, cooperative team player, adaptable to new or changing circumstances, professional demeanor, sensitive to client needs, self-motivated, creative and innovative;, • Excellent problem-solving skills; and, • High level of computer literacy including working knowledge of MS Office Suite. Physical requirements and work environment: • Must be able to lift 50 lbs;, • Must be able to sustain office work for 8+ hours per day including the following:, • Sitting in an office chair, • Typing, • Reaching for the telephone, • Standing at office equipment, • Hearing for phone use, • Sight for computer use, • Must be able to sustain factory work as needed including the following:, • Standing at machinery, • Reaching and pulling to operate machinery, • Sight for machinery operation, • Walking through shop, • Office environment is of moderate noise level., • Shop noise levels are such that protective ear-coverings are recommended. At CompoSecure, we believe in supporting our employees with a comprehensive benefits package that promotes health, financial well-being, and work-life balance. Our full-time team members enjoy access to: • Medical, Dental & Vision Coverage, • Flexible Spending Accounts (FSA), • Company-Paid Life and Disability Insurance, • 401(k) with Company Match, • Paid Time Off & Paid Holidays, • Annual Bonus Opportunities, • Employee Assistance Program (EAP) Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to . CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans.

Job Description About CompoSecure CompoSecure, a GPGI business (NYSE: GPGI), is the leading manufacturer of Premium Metal Payment Cards and also offers best-in-class Authentication and Digital Asset solutions. The Company's offerings combine elegance, simplicity, and security to deliver exceptional experiences and peace of mind, enabling trust for millions of people around the globe. For more information, please visit and . Position Overview: We are seeking an Advanced Manufacturing Engineer (Automation) who will perform the planning, design, and implementation of automation solutions across our production lines. This role involves designing and building custom machines in-house as well as managing external integrators to deliver turnkey automation systems. The ideal candidate will have a proven track record in machine design, supplier management, and project execution in high-volume manufacturing environments. This position is critical to driving automation initiatives that improve efficiency, scalability, and quality in a multi-million-unit-per-year production setting. Key Responsibilities • Automation System Design & Implementation, • Design and develop custom automation equipment using SolidWorks., • Lead full lifecycle of automation projects: concept, design, build, installation, and validation., • Collaborate with external integrators and manage suppliers for outsourced machine builds., • Production Line Automation, • Plan and implement automation solutions for assembly and packaging lines., • Develop project timelines, budgets, and resource plans., • Ensure all automation systems comply with OSHA, environmental, and company safety standards., • Implement risk assessments, machine guarding, and lockout/tagout procedures., • Identify automation opportunities to reduce labor, improve throughput, and enhance quality. Education: Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, or related field. Experience: • 5+ years of hands-on experience in machine design and automation engineering., • SolidWorks proficiency for machine and fixture design., • Strong knowledge of automation technologies: robotics, PLC programming, vision systems, conveyors, and material handling., • Experience with supplier management and working with external integrators., • Understanding of system design, defect analysis, and process optimization., • Familiarity with SPC, Six Sigma, and DoE methodologies for data-driven improvements., • Experience designing full production lines., • Familiarity with high-speed automation for multi-million-unit production., • Knowledge of Lean Manufacturing principles., • Exposure to ISO 13485 or automotive quality standards., • Experience with robotic integration, automated quality inspection, and vision systems. At CompoSecure, we believe in supporting our employees with a comprehensive benefits package that promotes health, financial well-being, and work-life balance. Our full-time team members enjoy access to: • Medical, Dental & Vision Coverage, • Flexible Spending Accounts (FSA), • Company-Paid Life and Disability Insurance, • 401(k) with Company Match, • Paid Time Off & Paid Holidays, • Annual Bonus Opportunities, • Employee Assistance Program (EAP), • Career Advancement Opportunities Benefits eligibility and details will be shared during the hiring process. We're excited to support you in building a rewarding career with us. Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to . CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans.

Job Description R&D Engineer About CompoSecure Founded in 2000, CompoSecure (NYSE: CMPO) is a technology partner to market leaders, fintechs and consumers enabling trust for millions of people around the globe. The company combines elegance, simplicity, and security to deliver exceptional experiences and peace of mind in the physical and digital world. CompoSecure's innovative payment card technology and metal cards with Arculus security and authentication capabilities deliver unique, premium branded experiences, enable people to access and use their financial and digital assets, and ensure trust at the point of a transaction. For more information, please visit and . Position Overview: This position is responsible for developing new products, product components, and production processes to support new product manufacturing. This engineer will be responsible for documenting new processes, creating technical drawings, and training individuals on newly developed processes. This is an excellent opportunity for an engineer to be technically creative and innovate in a highly desired consumer product segment. The R&D Engineer will work onsite 5 days a week out of our office in Somerset, NJ. Key Responsibilities: Research and Development: • Create and execute product enhancement, next generation, and new product development plans as assigned, • Be an independent thinker and ideate new products, • Work with management on new product goals, • Create new product prototypes, • Design tests and analyze test results to create viable products out of a design idea, • Document the new product development for seamless handover to production, • Develop new processes and manufacturing techniques to support new products, • Industrialize prototype process in preparation for manufacturing, • Help prepare invention disclosures for patent filing, • Identify and incorporate novel materials Process Improvement • Identify innovative and improved methods for existing product lines, • Industrialize new processing techniques, • Qualify new materials or components for existing products Other Important Responsibilities: • Consistently demonstrate the ability to prioritize tasks to ensure most critical processes impacting business results are being addressed, • Thorough documentation of all product development activities as well as existing and new process development, inclusive of progressive results, specific equipment parameters and work instructions where appropriate, • As part of the EMS- Environment Management System, will meet compliance obligations and accountability by contributing but not limited to the company's recycling guidelines, proper waste and other environmental performance practices, • Will be required to perform other job functions, as assigned Qualifications: • Minimum 3 years of experience, • BS or BEng Required, MS preferred. (Materials or Chemical Engineering is a plus), • Applied adhesive and polymer experience, • Developed specifications and formulating adhesives, • Designed tests for validating the chemical formulations at development phase and for incoming quality inspections during production., • Prior new product development experience, • Worked with vendors to produce the materials in volume., • Ability to relate to other employees and understand their needs, • Excellent communication skills, both oral and written, • Strong attention to detail and ability to self-check own work, • Excellent time management skills, • Task oriented excellent organizational skills, ability to prioritize workload, • Enthusiastic attitude, cooperative team player, adaptable to new or changing circumstances, professional demeanor, sensitive to client needs, self-motivated, creative and innovative, • Excellent problem-solving skills, • An aptitude for learning payment card business and adjacent fields. Preferred Skills and Qualifications: • Involvement with invention disclosure or patent preparation, • 3D Printing Experience, • Coding/Programming Experience - Java, Flash, Android At CompoSecure, we believe in supporting our employees with a comprehensive benefits package that promotes health, financial well-being, and work-life balance. Our full-time team members enjoy access to: • Medical, Dental & Vision Coverage, • Flexible Spending Accounts (FSA), • Company-Paid Life and Disability Insurance, • 401(k) with Company Match, • Paid Time Off & Paid Holidays, • Annual Bonus Opportunities, • Employee Assistance Program (EAP), • Career Advancement Opportunities Benefits eligibility and details will be shared during the hiring process. We're excited to support you in building a rewarding career with us. Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to . CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans

Job Description About CompoSecure: CompoSecure, a GPGI business (NYSE: GPGI), is the leading manufacturer of Premium Metal Payment Cards and also offers best-in-class Authentication and Digital Asset solutions. The Company's offerings combine elegance, simplicity, and security to deliver exceptional experiences and peace of mind, enabling trust for millions of people around the globe. For more information, please visit and . Position Overview: In this position, the CNC Technician is responsible for setup, troubleshooting and diagnosing problems on HAAS Vertical Machining Centers and DMG-MORI Horizontal Machining Centers. The position requires working with various CNC machines to complete setups to ensure proper machine operation and troubleshooting when machine malfunctions, to correct issues. Key Responsibilities: • Troubleshoot and diagnose problems on CNC machinery, • Strong familiarity with HAAS and DMG-MORI CNC Machining Centers, • Sets up / change over jobs on CNC mills , changes tooling , adjusts offsets and calibrate probes to ensure parts are accurate and machine is functioning correctly, • Assist team members with quality related questions / concerns, • Ensures equipment and process are qualified when released to operators, • Communicate status of machine activities to supervision, • Inspect tool holders and machine function and schedule preventative maintenance, • Understand how to troubleshoot from a technical standpoint. Work with machine tool dealer and technical manuals to correct issues their not familiar with, • Provide training regarding basic safety, machine operation, quality., • Instruct on machine fault resolution, • Work with mechanics and do some light mechanical work, • Document machine issues, • Assist in normal production by operating equipment as directed Other Important Responsibilities: • Must be able to operate assigned equipment safely and efficiently, • Have a strong work ethic and the ability to work cooperatively, • Good organizational and communication skills, • Must be able to keep record of time spent and materials used, • Timely Corrective Action response and resolution to relevant situations, • Engage and support companywide Safety and Cleanliness Programs, • Other miscellaneous duties as assigned. Qualifications: • High School or GED Diploma required, • Minimum 2 years of CNC Programming experience, • Minimum 3 years or "VERY" strong HAAS experience including skilled operation of CNC Mills, • Experience in G & M Code, • Experience in programming and setting up 3 & 4 axis Vertical and Horizontal Machining Centers, • Experience with CadCam software and Autocad or similar a plus, • Good working knowledge and understanding of tooling and proper usage, as well as speed & feed calculation. Materials Aluminum, Stainless, Plastics, and Steel., • Task oriented, ability to prioritize work load, • Enthusiastic attitude, cooperative team player, adaptable to new or changing circumstances, professional demeanor, self-motivated, creative and innovative Physical requirements and work environment: • Must be able to lift 50 lbs, • Must be able to sustain physical work for 8+ hours per day including the following:, • Standing for 8+ hours per day, • Reaching and pulling, • Sight, • Walking through shop, • Bending, climbing and crouching., • Shop noise levels are such that protective ear-coverings are recommended, • Medical, Dental & Vision Coverage, • Flexible Spending Accounts (FSA), • Company-Paid Life and Disability Insurance, • 401(k) with Company Match, • Paid Time Off & Paid Holidays, • Annual Bonus Opportunities, • Employee Assistance Program (EAP) Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to . CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans.

Job Description Position Overview: We are seeking a skilled EMV Smartcard Developer to design, develop, and optimize embedded firmware for smart card and secure element applications. This role will involve working with JavaCard technology, cryptographic algorithms, and secure hardware environments to develop high-performance, secure, and compliant solutions for payment, identity, and access control applications. The EMV Smartcard Developer will be expected to work on-site five days a week in our Somerset, NJ office. Key Responsibilities: • Deliver technical expertise and product knowledge to sales teams and customers through presentations, demonstrations, and training sessions., • Conduct customer visits to provide consulting and training on technical solutions and offerings., • Coordinate internal departments (R&D, Tech Support, Sales, and Production) to manage customer-initiated new product development projects., • Ensure alignment and timely execution of all technical deliverables throughout project lifecycle., • Act as a technical backup to other team members by providing documentation, guidance, and training to support internal stakeholders, partners, and customers., • Serve as the technical lead for EMV product development, including chip profile definition, key management, and chip personalization specification., • Maintain direct technical relationships with customer and partner organizations at various levels., • Provide end-to-end technical involvement across internal departments and external entities (e.g. Visa, Mastercard) from solution proposal through deployment, ensuring security compliance and robust key management., • Deliver training sessions on products and solutions; contribute to proposal and tender documentation., • Offer consultancy, change management support, and troubleshooting for customer production issues and technical inquiries., • Oversee and implement key management protocols and procedures., • Perform other duties as assigned by management. Qualifications: • Bachelor's or Master's degree in Computer Science, Electrical Engineering, or a related field., • A minimum of 5 (or more) years of experience in JavaCard firmware development., • Self-driven, hands-on technology professional with strong analytical and conceptual thinking., • Ability to understand customer and industry needs and translate them into actionable technical solutions and product plans., • Exceptional organizational, problem-solving, and decision-making skills with a results-oriented approach., • Effective at managing multiple high-priority tasks in a fast-paced environment., • Strong interpersonal, communication (written and verbal), and presentation skills., • Fluency in English is required., • Proficient in Smart Card technologies such as Java Card, MULTOS, and EMV., • Understanding of cryptographic methods including symmetric/asymmetric encryption (DES, 3DES, RSA)., • Experience with payment Smart Card services is highly desirable., • Detail-oriented with a focus on consistency and accuracy., • Capable of working independently as well as collaboratively in a team environment About CompoSecure CompoSecure, a GPGI business (NYSE: GPGI), is the leading manufacturer of Premium Metal Payment Cards and also offers best-in-class Authentication and Digital Asset solutions. The Company's offerings combine elegance, simplicity, and security to deliver exceptional experiences and peace of mind, enabling trust for millions of people around the globe. For more information, please visit and . We offer a comprehensive benefits package designed to support your health, financial well-being, and work-life balance, including medical, prescription, dental, and vision coverage; FSA/HSA options; company-paid life and disability insurance; 401(k) with company match; paid time off (PTO) and holidays; annual bonus opportunities; an employee assistance program (EAP); and opportunities for career growth and advancement. Additional details will be provided during the hiring process. CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans. Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to .

Job Description Position Overview: This position is responsible for developing new products, product components, and production processes to support new product manufacturing. This engineer will be responsible for documenting new processes, creating technical drawings, and training individuals on newly developed processes. This is an excellent opportunity for an engineer to be technically creative and innovate in a highly desired consumer product segment. The R&D Engineer will work onsite 5 days a week out of our office in Somerset, NJ. Key Responsibilities: Research and Development: • Create and execute product enhancement, next generation, and new product development plans as assigned, • Be an independent thinker and ideate new products, • Work with management on new product goals, • Create new product prototypes, • Design tests and analyze test results to create viable products out of a design idea, • Document the new product development for seamless handover to production, • Develop new processes and manufacturing techniques to support new products, • Industrialize prototype process in preparation for manufacturing, • Help prepare invention disclosures for patent filing, • Identify and incorporate novel materials Process Improvement Process Improvement: • Identify innovative and improved methods for existing product lines, • Industrialize new processing techniques, • Qualify new materials or components for existing products Other Important Responsibilities: • Consistently demonstrate the ability to prioritize tasks to ensure most critical processes impacting business results are being addressed, • Thorough documentation of all product development activities as well as existing andnew process development, inclusive of progressive results, specific equipment parameters and work instructions where appropriate, • As part of the EMS - Environment Management System, will meet compliance obligations and accountability by contributing but not limited to the company's recycling guidelines, proper waste and other environmental performance practices, • Will be required to perform other job functions, as assigned Qualifications: • Minimum 3 years of experience, • BS or BEng Required, MS preferred. (Electrical Engineering is a plus), • Applied electrical engineering experience especially in RFID, • Circuit design and prototyping, • Electronic circuit footprint miniaturization, • CAD skills including 3D modeling, • Ability to relate to employees and understand their needs, • Excellent communication skills, both oral and written, • Strong attention to detail and ability to self-check own work, • Excellent time management skills, • Task oriented excellent organizational skills, ability to prioritize workload, • Enthusiastic attitude, cooperative team player, adaptable to new or changing circumstances, professional demeanor, sensitive to client needs, self-motivated, creative and innovative, • Excellent problem-solving skills, • High level of computer literacy including working knowledge of Microsoft Office applications and Outlook, • An aptitude for learning payment card business and adjacent fields. About CompoSecure CompoSecure, a GPGI business (NYSE: GPGI), is the leading manufacturer of Premium Metal Payment Cards and also offers best-in-class Authentication and Digital Asset solutions. The Company's offerings combine elegance, simplicity, and security to deliver exceptional experiences and peace of mind, enabling trust for millions of people around the globe. For more information, please visit and . Preferred Skills and Qualifications: • Prior new product development experience, • Involvement with invention disclosure or patent preparation, • 3D Printing Experience, • Circuit design experience, • Medical, Dental & Vision Coverage, • Flexible Spending Accounts (FSA), • Company-Paid Life and Disability Insurance, • 401(k) with Company Match, • Paid Time Off & Paid Holidays, • Annual Bonus Opportunities, • Employee Assistance Program (EAP), • Career Advancement Opportunities Benefits eligibility and details will be shared during the hiring process. We're excited to support you in building a rewarding career with us. Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to . CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans.

Job Description Position Overview: We're looking for a highly skilled and motivated finance leader to join us as the Vice President, FP&A. Reporting directly to the CFO, this role is a key strategic partner to leaders across the organization. The VP will lead and scale our FP&A function, elevate financial rigor, and help drive the company's long‑term growth objectives through clear insights, strong forecasting, and data‑driven decision support. This is a high‑visibility role with significant influence on strategy, performance management, and operational execution. Experience operating in a public‑company environment-where accuracy, transparency, and compliance are paramount-is essential. The position will work five days a week on-site in Somerset, NJ. Key Responsibilities: • Strategic Planning & Forecasting, • Lead the development of annual and long‑range plans, monthly and quarterly forecasts, predictive analytics, and performance reporting., • Manage the company's P&L, ensuring leadership has timely visibility into risks, opportunities, and performance against targets., • Build scalable forecasting and modeling processes that support strategic investments and guide financial decision‑making., • Budgeting & Expense Management, • Drive the budgeting process and partner with business leaders to optimize expense management., • Ensure investments are rigorously analyzed and operational costs are well‑controlled., • Leadership & Business Partnership, • Establish a culture of FP&A excellence-positioning the function as a trusted, strategic partner across the organization., • Collaborate with the leadership team to translate business strategies into financial outcomes and measurable goals., • Lead, mentor, and develop the FP&A team, raising expectations and fostering accountability, integrity, and transparency., • Deliver enhanced analytics, dashboards, and reporting to support strategic decisions., • Prepare executive‑level presentations and recommendations for senior leadership and the Board of Directors., • Produce financial reporting packages including KPIs, business analyses, financial statements, operational dashboards, and variance explanations., • Recommend and implement process improvements to strengthen forecasting, reporting, and analytics. Drive forecast accuracy., • Elevate and scale systems and tools to improve automation, accuracy, and speed of financial insights., • Lead FP&A integration efforts for new acquisitions., • AI & Automation Mindset, • Champion the use of AI, automation, and advanced analytics to streamline FP&A workflows, improve forecasting accuracy, and enhance decision‑making across the organization. Qualifications: • 15+ years of progressive experience, including at least 8 years in FP&A., • Experience supporting or leading FP&A in a public company, with a strong understanding of reporting rigor, compliance expectations, and stakeholder transparency., • Bachelor's degree in Accounting, Finance, or related field; MBA strongly preferred. CPA/CFA a plus., • Strong business and financial acumen with the ability to model current and future states., • Proven experience scaling companies, driving change, and supporting high‑growth environments., • Strong leadership skills with sound judgment and a track record of delivering results., • Excellent interpersonal, analytical, and problem‑solving skills., • Exceptional written and verbal communication skills with the ability to influence at all levels., • Highly organized, detail‑oriented, and able to manage multiple priorities in a fast‑paced environment., • High ethical standards, including integrity, transparency, and trust., • Demonstrated critical thinking, professional accountability, and ownership of outcomes., • Ability to proactively manage change and prioritize complex workloads., • Deep familiarity with financial accounting, modeling, and analysis., • Strong executive presence with the ability to lead through influence and drive execution., • Comfort with AI‑enabled tools and a forward‑looking approach to automation and digital transformation. About CompoSecure CompoSecure, a GPGI business (NYSE: GPGI), is the leading manufacturer of Premium Metal Payment Cards and also offers best-in-class Authentication and Digital Asset solutions. The Company's offerings combine elegance, simplicity, and security to deliver exceptional experiences and peace of mind, enabling trust for millions of people around the globe. For more information, please visit and . At CompoSecure, we believe in supporting our employees with a comprehensive benefits package that promotes health, financial well-being, and work-life balance. Our full-time team members enjoy access to: • Medical, Dental & Vision Coverage, • Flexible Spending Accounts (FSA), • Company-Paid Life and Disability Insurance, • 401(k) with Company Match, • Paid Time Off & Paid Holidays, • Annual Bonus Opportunities, • Employee Assistance Program (EAP), • Career Advancement Opportunities Benefits, eligibility and details will be shared during the hiring process. We're excited to support you in building a rewarding career with us. CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans. I have read and understand the job description above. I agree that I honestly meet all these qualifications and feel that I can be successful in this position. Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to .

Job Description About CompoSecure CompoSecure, a GPGI business (NYSE: GPGI), is the leading manufacturer of Premium Metal Payment Cards and also offers best-in-class Authentication and Digital Asset solutions. The Company's offerings combine elegance, simplicity, and security to deliver exceptional experiences and peace of mind, enabling trust for millions of people around the globe. For more information, please visit and . Position Overview: The Administrative Assistant will work five days a week on-site in Somerset, NJ. The Administrative Assistant provides high‑quality administrative and operational support to leaders and/or teams across the organization. This role requires strong organizational skills, sound judgment, discretion, and the ability to manage multiple priorities in a fast‑paced environment. The Administrative Assistant serves as a key partner in ensuring efficient day‑to‑day operations, clear communication, and professional coordination of administrative activities. Key Responsibilities: Administrative & Operational Support • Provide day‑to‑day administrative support including calendar management, meeting coordination, travel arrangements, and expense reporting, • Prepare, proofread, and format correspondence, reports, presentations, and other business documents, • Organize and maintain electronic and physical filing systems; retrieve information as needed, • Schedule and organize internal and external meetings, including logistics and materials preparation, • Serve as a point of contact for internal and external stakeholders; respond to routine and non‑routine inquiries professionally, • Support preparation for leadership meetings by compiling materials, agendas, and follow‑up items, • Track tasks, deadlines, and action items to support timely completion of projects, • Assist with special projects, presentations, and ongoing administrative initiatives, • Handle sensitive and confidential information with discretion and professionalism, • Interact with vendors, customers, and business partners as required, • Order supplies and support general office operations as needed, • Perform other related duties consistent with the role Qualifications: • High school diploma or equivalent work experience required; associate or bachelor's degree preferred, • 3–5+ years of experience in an administrative assistant or similar support role (scope may vary by level), • Strong organizational, time‑management, and prioritization skills, • Excellent written and verbal communication skills, • High attention to detail with ability to self‑review work for accuracy, • Proven ability to maintain confidentiality and exercise sound judgment, • Proficiency with Microsoft Office (Outlook, Word, Excel, PowerPoint) and document management tools, • Ability to work independently and collaboratively in a fast-paced environment At CompoSecure, we believe in supporting our employees with a comprehensive benefits package that promotes health, financial well-being, and work-life balance. Our full-time team members enjoy access to: • Medical, Dental & Vision Coverage, • Flexible Spending Accounts (FSA), • Company-Paid Life and Disability Insurance, • 401(k) with Company Match, • Paid Time Off & Paid Holidays, • Annual Bonus Opportunities, • Employee Assistance Program (EAP), • Career Advancement Opportunities Benefits eligibility and details will be shared during the hiring process. We're excited to support you in building a rewarding career with us. CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans. Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to . CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans.

Job Description Insurance Sales Producer - Personal Lines Private Client Advisor Position Overview World Insurance Associates (“World”) is a unique financial services organization with a global network of brokers and specialists who empower individuals and families to make informed decisions to protect their assets, manage risk, and achieve long-term financial security. Founded in 2011, World is one of the fastest-growing, Top 25 insurance brokers in the U.S. with nearly 3,000 employees in more than 300 offices across North America and the U.K. World specializes in personal and commercial insurance, surety and fidelity bonding, employee and executive benefits, investment advisory and retirement plan services, and payroll & HR solutions. As a Personal Lines Private Client Advisor, your primary responsibility is to identify, cultivate, and manage relationships with high-net-worth individuals and families, providing them with customized insurance solutions tailored to their unique needs. You will leverage World’s expansive resources to offer white-glove service and comprehensive risk management strategies. Primary Responsibilities * Identify, prospect, and develop new business opportunities within the high-net-worth and private client space. * Cultivate and maintain relationships with affluent individuals, family offices, wealth managers, and centers of influence. * Provide expert guidance on complex personal insurance needs, including homeowners, auto, collections, umbrella liability, watercraft, aviation, and other specialized policies. * Utilize World’s broad platform to offer a holistic approach to risk management, integrating solutions across personal lines, commercial lines, employee benefits, and financial services. * Deliver a high-touch client experience, ensuring proactive policy reviews, personalized coverage recommendations, and ongoing risk assessments. * Collaborate with World’s Private Client team and carrier partners to design tailored insurance programs. * Track all sales activities in HubSpot and leverage CRM tools to maximize efficiency and client engagement. Qualifications * Proven experience in personal lines insurance, with a strong focus on high-net-worth/private client solutions. * Deep understanding of affluent clientele and their unique risk management needs. * Ability to cultivate relationships and act as a trusted advisor to clients. * Strong knowledge of personal insurance products, markets, and underwriting guidelines for high-value assets. * Active Property & Casualty insurance license required. * Experience with agency management software such as AMS360, Epic, and sales CRM tools like HubSpot is preferred. * Demonstrated ability to build and present customized risk management solutions. Compensation As a Personal Lines Private Client Advisor, your compensation is directly tied to your effort and performance. We offer a competitive base salary plus commissions, along with a full suite of employee benefits, including an immediately vested 401(k) match. The base salary range for this role is $60,000 to $200,000+, depending on experience and revenue generation capabilities. Your base salary will grow as your book of business expands, offering significant earning potential. Equal Employment Workforce and Workplace World celebrates and supports diversity among its employees. We are an equal opportunity employer, dedicated to fostering an inclusive workplace regardless of race, color, ancestry, religion, sex, national origin, age, citizenship, marital status, disability, gender identity, sexual orientation, or veteran status. We also provide reasonable accommodations for applicants and employees with disabilities. To Executive Search Firms and Staffing Agencies: World does not accept unsolicited resumes from agencies without a signed mutual service agreement. Any unsolicited resumes will be considered World’s property, and we will not be obligated to pay a referral fee. This includes resumes submitted directly to hiring managers without contacting World’s Human Resources Talent Department first. Join World Insurance Associates and help protect what matters most to high-net-worth clients through personalized, sophisticated risk management solutions #LI-ET1 Powered by JazzHR mMxNdE0Yhd

Job Description About CompoSecure CompoSecure, a GPGI business (NYSE: GPGI), is the leading manufacturer of Premium Metal Payment Cards and also offers best-in-class Authentication and Digital Asset solutions. The Company's offerings combine elegance, simplicity, and security to deliver exceptional experiences and peace of mind, enabling trust for millions of people around the globe. For more information, please visit and . Position Overview: This position executes manufacturing operations on prototype and research samples, as directed by the Prototype Lead. The technician is also responsible for documenting equipment parameters, recipes, and key attributes for completed operations. Key Responsibilities: • Perform tasks tied to sample requests, work orders, leadership, support engineering, graphics, supply chain, sales, and other internal groups as needed., • Independently execute the following operations for all product types:, • Machine set-up, shut down, and changeover, • Stamping and embedding, • Final inspection and packing, • CNC milling / engraving, • Material preparation: sub assembly/surface finishes, • Industrial inkjet, • Laser cutting, • Tacking, • Lamination, • Precision leveling, • Laser engraving, • Perform quality checks including reviewing current part with proof for product accuracy, • Understand expectations of work instruction set, • Document all parameters and processes for future repeatability, • Ensure high quality of all products while continually verifying accuracy of settings, • Record processing/quality issues and resolution, • Elevate to manager any manufacturing or equipment concerns, • Coordinate with other team members within the prototype group, • Maintain inventory and retain control, • Update project status tracking software, • Identify and understand various materials used in build, • Work with team to match previously targeted color samples, • Assist production when necessary Other Important Responsibilities: • Timely corrective action response and resolution to relevant project situations, • Engage and support companywide safety and cleanliness programs, • Operate assigned equipment safely and efficiently, • Perform miscellaneous duties as assigned Qualifications: • Minimum 3 years of work experience, • Associate degree in related field preferred, • Enthusiastic attitude, flexible to new or changing circumstances, professional demeanor, sensitive to client needs, self-motivated, creative and innovative, • Ability to function as an active team member with limited supervision, • Excellent communication, problem solving, and time management skills, • Strong attention to detail and ability to self-check own work, • Task oriented with superior organizational skills and ability to prioritize workload, • Ability to accept responsibility and account for own actions, • Capable of understanding and carrying out oral and written directives, • Computer literacy including working knowledge of Microsoft Office applications, • Medical, Dental & Vision Coverage, • Flexible Spending Accounts (FSA), • Company-Paid Life and Disability Insurance, • 401(k) with Company Match, • Paid Time Off & Paid Holidays, • Annual Bonus Opportunities, • Employee Assistance Program (EAP) Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to . CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans.

Job Description About CompoSecure Founded in 2000, CompoSecure is a technology partner to market leaders, fintechs and consumers enabling trust for millions of people around the globe. The company combines elegance, simplicity, and security to deliver exceptional experiences and peace of mind in the physical and digital world. CompoSecure's innovative payment card technology and metal cards with Arculus security and authentication capabilities deliver unique, premium branded experiences, enable people to access and use their financial and digital assets, and ensure trust at the point of a transaction. For more information, please visit and . Position Overview This position is responsible for ensuring the cleanliness of the facility. Key Responsibilities: • Daily cleaning of all bathrooms;, • Daily cleaning of all lunch/break rooms;, • Dusting, sweeping, vacuuming, mopping, etc, • Daily emptying of all trash receptacles; and, • Maintain clean external environment around all employee entrances. Other Important Responsibilities: • Maintain levels of all cleaning supplies;, • Maintain levels of all paper products;, • Source cleaning supplies, when required, • Timely Corrective Action response and resolution to relevant situations, • Engage and support companywide Safety and Cleanliness programs, • Other miscellaneous duties as assigned. Qualifications: • A minimum 1 year (or more) of relevant experience, • Knowledge of mechanical or motorized cleaning equipment, • High School Graduate preferred, • Task oriented excellent organizational skills, ability to prioritize work load, • Enthusiastic attitude, cooperative team player, adaptable to new or changing circumstances, professional demeanor, self-motivated, creative and innovative., • Utilize strong English language skills, both spoken and written, to interact effectively with team members and complete job tasks. Physical requirements and work environment: • Must be able to lift 70 lbs;, • Must be able to sustain physical work for 8+ hours per day including the following:, • Standing, • Reaching and pulling, • Sight, • Walking through shop, • Bending, climbing and crouching., • Office environment is of moderate noise level., • Shop noise levels are such that protective ear-coverings are recommended., • Grease, oil and water exposure., • Sometimes subject to external weather conditions., • Medical, Dental & Vision Coverage, • Flexible Spending Accounts (FSA), • Company-Paid Life and Disability Insurance, • 401(k) with Company Match, • Paid Time Off & Paid Holidays, • Annual Bonus Opportunities, • Employee Assistance Program (EAP) Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to . CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans.

Provide Social security number (only in the US).

Provide Social security number (only in the US).

Provide Social security number (only in the US).

Provide Social security number (only in the US).

Provide Social security number (only in the US).

Provide Social security number (only in the US).

Provide Social security number (only in the US).

Provide Social security number (only in the US).

Provide Social security number (only in the US).

Provide Social security number (only in the US).

Provide Social security number (only in the US).

Provide Social security number (only in the US).