Plant safety jobs in Hicksville, New YorkCreate job alerts

Job Description Job Title: Maintenance Technician Location: Melville, NY 11747(Onsite) Shift: 1st shift Job Description: This position is responsible for providing an intermediate level of expertise in responding to work orders, troubleshooting, and providing preventive maintenance on the facility HVAC and mechanical equipment in an industrial, large commercial, or logistics distribution environment including clean rooms. This position is responsible for providing an intermediate level of expertise in responding to work orders, troubleshooting, and providing preventive and corrective maintenance on the facility HVAC and mechanical equipment. Must have the ability to diagnose and troubleshoot all HVAC equipment and systems. Must demonstrate good written and verbal communication. The position must have the ability to identify and correct any safety-related issues and perform independent equipment evaluations to identify potential equipment failures. General Maintenance of equipment will also be required. Responsibilities: • Maintain, troubleshoot, and repair overhead/roll up doors, gates, and gate arms. Maintain, troubleshoot, and repair loading dock levelers, dock plates, and dock restraints., • Conduct preventive maintenance inspections and perform required preventive maintenance actions such as lubrication, cleaning, filter changes, etc., • Replace motors, bearings, sheaves, shafts, etc. Perform preventive maintenance on mechanical systems control and operating systems as scheduled in the Computerized Maintenance Management System (CMMS)., • Communicate non-compliance concerns to ensure corrective actions have taken place., • Respond and provide service and feedback to the customer on all work orders while assuring compliance to codes, regulations and industry standards., • Recommend measures to improve maintenance methods and equipment performance. Analyze and resolve work problems or assist workers in solving work problems. Understand company policies and enforce safety regulations., • Safely perform functions of the position including following proper safety guidelines such as job hazard analysis and lockout/tagout procedures and wearing PPE as required., • Operate a variety of equipment such as hand tools, laptop computers and diagnostic hardware to perform work., • Maintain a strict schedule to be successful in the assignment yet demonstrate flexibility in the day-to-day activities and scheduling for the benefit of the customer., • Other duties as assigned by Manager or Supervisor. Minimum Requirements: · High school diploma or demonstrated equivalent. · Three years of experience as an HVAC/R maintenance technician in industrial and/or commercial environments or demonstrated equivalent combination of education and experience. · Ability to work in an aerial lift or scissor lift at heights up to 30 feet or higher. · Excellent verbal and written communications. · Excellent interpersonal skills, i.e., listening to customer needs, articulating path forward and giving solutions that provide value to the customer, etc. · Ability to pass a medical evaluation for respirator use and be able to successfully complete a fit test for several types of respirators. · Ability to obtain a security access badge at our client’s location. · Ability to read and understand information contained in a variety of documents or displayed on a computer screen. · Demonstrated fluency in computer use including the full Microsoft product line. · Ability to obtain an appropriate driver`s license issued by the State Department of Motor Vehicles, as requested. · Must be able to obtain and maintain facility credentials/authorization. Preferred Requirements: · Technical degree preferred. · EPA Universal Refrigeration License or ability to obtain. · Experience working in a GMP or similar regulated environment such as hospitals, biomedical or pharmaceutical campuses. · Ability to read and understand repair manuals, specifications, drawings, and schematic diagrams. · Experience working with heavy industrial or manufacturing plant steam systems, centrifugal chillers, air handling units, turbines, boilers, cooling towers, air compressors, air dryers, heat exchangers, exhaust systems, pneumatic controls, and building automation control systems. · Experience performing vibration data collection and analysis and/or using ultrasound testing equipment for predictive maintenance and condition monitoring. · Experience using a CMMS; Maximo experience is a plus. · Experience interpreting a variety of instructions furnished in written, oral, diagram, or schedule form. · Excellent verbal and written communication skills. Physical Requirements: · Regularly lift to 50 lbs. Regularly climb ladders, steps, and scaffolding Repetitive motions: bend, stoop, squat, kneel, stretch, reach, wrist movement Walk extensively throughout the plant during shift Work at an accelerated pace in emergency conditions. · Ability to differentiate colors pertaining to wire color-coding Wear steel toe safety shoes, safety glasses, gloves, hard hats, and other Personal Protective Equipment as needed. · Cope with demands (stressors) that are associated with the job and/or the work environment. · Requires ability to read and understand information contained in a variety of documents or displayed on a computer screen. · Requires ability to use a variety of office equipment and to operate a computer keyboard to access databases, to send/receive messages and to prepare documents. · Requires ability to attend meetings throughout the site and potentially travel to other sites, customer and/or vendor locations in the area, as well as some air travel to more distant locations. · Requires the ability to communicate with others on the telephone and in one-on-one or group discussions, meetings, and presentations. · Demonstrated fluency in computer use including the full Microsoft product line. · Requires some moving of light to medium weight materials into desks, filing cabinets and other storage locations. · Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress. Other Attributes: · Must be willing to work overtime when required. · May be required to work holidays and weekends. Company DescriptionIntellyk is a Joint Commission Certified global staff augmentation firm providing a wide-range of talent on-demand and total workforce solutions. To know more about Intellyk, please visit our website . We are constantly on the lookout for professionals to fulfil the staffing needs of our clients, and we currently have a job opening that may interest you.Intellyk is a Joint Commission Certified global staff augmentation firm providing a wide-range of talent on-demand and total workforce solutions. To know more about Intellyk, please visit our website are constantly on the lookout for professionals to fulfil the staffing needs of our clients, and we currently have a job opening that may interest you.

Job Description CNC Machine Maintenance Engineer - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The CNC Machine Maintenance Engineer position is responsible for performing highly diversified duties to install, troubleshoot, repair, and maintain production and facility equipment according to safety, predictive, and productive maintenance systems and processes to support the achievement of the site’s business goals and objectives. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Perform highly diversified duties to install and maintain production machines and the plant facility’s equipment., • Provide emergency/unscheduled repairs of production equipment during production and perform scheduled maintenance repairs of production equipment during machine service. Must have experience with Vacuum Braze Ovens., • Perform simple machinist duties and responsibilities., • Perform mechanical skills, including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting, and repair of production machines., • Read and interpret equipment manuals and work orders to perform required maintenance and service., • Diagnose problems, replace or repair parts, test, and make adjustments., • Perform regular preventive maintenance on machines, equipment, and plant facilities., • Perform a variety of plumbing maintenance and carpentry functions., • Use a variety of hand and power tools, electric meters, and material handling equipment in performing duties., • Detect faulty operations, defective material, and report those and any unusual situations to proper supervision., • Comply with safety regulations and maintain clean and orderly work areas. QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Technical Capacity., • Good Troubleshooting Ability., • Ethical Conduct., • Communication Proficiency., • Results Driven., • Initiative., • Valid Driver’s License., • Experience with the maintenance of CNC Machines or Vacuum Braze Ovens EDUCATION AND/OR EXPERIENCE • High school diploma/GED and completion of a craft apprenticeship, or an equivalent number of years of education and production maintenance experience., • 2+ years of manufacturing experience; some hydraulic, pneumatic, mechanical, and industrial skills with PLC experience, Industrial and Commercial electric, and HVAC., • AA in mechanical or electrical Engineering or a Certificate in Analytical Troubleshooting preferred. 5+ years in manufacturing/facilities maintenance preferred. PHYSICAL DEMANDS • While performing the duties of this job, the employee is regularly required to talk and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing all day. The employee must frequently lift and/or move items over 50 pounds., • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Fine manipulation and repetitive motion may be required for some duties. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $110,000 to $125,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job Description • We are hiring immediately for full time WAREHOUSE ATTENDANT positions., • Location: Canteen Melville - 255 Pinelawn Road, Melville, NY 11747 Note: online applications accepted only., • Schedule: Full time schedule. Sunday - Thursday, hours may vary. More details upon interview., • Requirement: Previous experience is preferred, but not required. About Canteen: Canteen brings break time to everyone. We combine food, service, and experience backed by industry-leading technology to help companies create a better workplace and connect their employees. Canteen’s solutions include markets, office coffee and snacks, unattended retail, and culinary. Our people are at the heart of everything we do. Their dedication, collaboration, and passion fuel our growth. Interested in joining our team? You bring the enthusiasm, customer service, and commitment; we’ll supply the opportunity and innovation. Together, we’ll continue to transform our industry. Come for the job, stay for the career. We are Canteen. Job Summary Summary: Receives, stores and distributes material, tools, equipment and products. Essential Duties and Responsibilities: • Reads production schedule, customer order, work order, shipping order or requisition to determine items to be moved, gathered or distributed., • Conveys materials from receiving or production areas to storage or other designated areas., • Places materials/goods on racks, shelves and bins or in refrigerated rooms according to predetermined sequence such as size, type, style, color or product code., • Fills requisitions, work orders or requests for materials, tools or other stock items and distributes items to production workers or assembly line., • Assembles customer orders from stock and places orders on pallets or shelves; conveys orders to packing station or shipping department., • Marks materials with identifying information., • Opens bales, crates and other containers., • Records amounts of materials or items received or distributed., • Weighs or counts items for distribution within plant to ensure conformance to company standards., • Arranges stock parts in specified sequence for assembly by other workers., • Uses computer to enter records., • Compiles worksheets or tickets from customer specifications., • Drives vehicle to transport stored items or to pick up items., • Completes requisition forms to order supplies from other plant departments., • Prepares parcels for mailing., • Maintains inventory records., • Performs other duties as assigned., • Ensures proper presentation, portion control and maintenance of serving temperatures; follows HACCP standards., • Personal commitment to your own safety and that of others., • Abides by all Company policies and procedures including but not limited to:, • The use of a medium weight cut gloves when handling or using knives, peelers, choppers, mandolins or cleaning a slicer., • The use of oven mitts, fryer gloves or steamer gloves when handling hot pans from ovens, warmers or steamtables. Full-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs). Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here or copy/paste the link below for paid time off benefits information. About Compass Group: Achieving leadership in the foodservice industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Certain positions may require Florida Level 2 background screening. Details: Applications are accepted on an ongoing basis. Canteen maintains a drug-free workplace. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act. Req ID:1513123 Canteen

Company For over 50 years, Hitemco has been partnering with leading edge technology companies to help make critical surfaces successful. We specialize in high performance surface coatings and understand the thin line between a critical part and the environment that it operates in. Whether it’s in aerospace, energy, minerals, or transport, we work with our customers to deliver outstanding materials knowledge, fast production turn times, reliable forecasts, and great customer service. Lincotek Group is a world leader in the coatings industry and is active, through its different operating business units, in the European, Asian and American continents Position Summary The objective of the Industrial Maintetnance Technician is to support plant production machinery and facility maintenance activities, as required. Essential Functions • Undertaking and completion of preventive maintenance activities to plant equipment utilizing the plant computerized maintenance management system., • Troubleshooting equipment problems or failures, determining the appropriate actions for repair, specifying parts and materials needed for repair, and ordering parts as required., • Developing solid, professional working relationships with all plant employees, and responding to requests for maintenance in a timely manner so as to reduce plant equipment downtime., • Must have the ability to complete repairs to equipment with minimal supervision, especially while working on the off-shifts., • Perform all planned and unplanned facility maintenance activities, • Must be knowledgable in general building maintenance, Plumbing and Electrical., • Analysis, purchase, installation and coordination for new plant/processes consumables and spare parts., • Knowledge of how to properly and safely use handheld and facility power tools and equiptment., • Performs other duties as assigned. Work Environment This job operates in both an office environment and a manufacturing environment. The role routinely uses standard office equipment, such as computers, phones and photocopiers. The individual will be required to adhere to safety policies and procedures on the manufacturing floor. Physical Demands While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand, walk, use hands to finger, handle or feel and reach with hands and arms. The employee is occasionally required to sit, climb or balance and stoop, kneel, crouch or crawl. The employee must frequently lift and/or move up to 10 lbs and occasionally lift and or move up to 50 lbs. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Position Type/Expected Hours of Work This is a full-time position, requiring 8 hours of work per day Monday thru Friday, some overtime as business needs change. Willing to work flexible shifts, overtime, and weekends, if necessary. Requirements • High School Diploma or GED, • Minimum of 5 years of experience performing the essential functions of the job., • Knowledge of CMMS, PLC, vacuum, electronics, welding, precision measuring instruments and ability to understand Blueprints, • Career readiness certificate (minimum silver), • Able to lift at least 50lbs, • Electrical experience and License preferred, • Forklift and Aerial Lift Certified $35-$40/hr based on experience. Lincotek Surface Solutions provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law.

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: Under the direction of the Operations Supervisor, Operations Lead Personnel and in coordination of fellow Operations Personnel the incumbent will perform a variety of basic tasks relevant to the day-to-day operation of the wastewater treatment plant facilities, processes and equipment, including process and equipment rounds, recording operations data and information, making observations and reporting on variations in operating conditions, maintaining logs and other required reports and forms, and provides input for corrective actions and implements corrective actions as directed. Assist Operations in efforts to maintain efficient and cost-effective facility operations while maintaining compliance with all Corporate and Regulatory environmental, health and safety rules and requirements. Primary Duties/Responsibilities: • Works a scheduled shift and will be subject to required emergency call in or shift coverage as Operational needs demand., • Under the direct Supervision of Shift Supervisor or Lead person may be required to perform some of the following tasks depending on the station assigned for that shift:, • Record and Read meters for (pumps, gauges, motors etc.…) in accordance with all regulatory requirements., • Record tank levels, sludge blanket levels., • Operate equipment pertinent to assigned workstation (GBT, BFP, overhead lifting jib crane, pumps), • Open, close and adjust valves for tanks & pumps., • Observe their process areas (pumps, motors, valves, sewage color, odor, flow) record their findings., • Collect samples for laboratory analysis., • Receive chemicals in bulk, drum and tote form., • Adjust / bleed pumps as directed., • Keep the workstation and surrounding area safe and clear of debris., • Inspect equipment for proper functionality and refer to Maintenance for any necessary repairs., • Maintain a logbook for the station they are operating., • Create work requests for equipment found to be malfunctioning or broken., • Make adjustments to equipment to optimize the operation (GBT & Dewatering)., • Work is performed both inside and outside with exposure to all kinds of weather conditions., • Incumbents may be occasionally exposed to some noise, silica, dust, fumes, smoke, gases, greases, oils, electrical energy, solvents and vibration., • Incumbents may work on slippery/uneven surfaces, around machinery with moving parts, moving objects/vehicles, ladder/scaffolding, below ground and may be exposed to water or other liquid materials., • Maintain a high level of focus on health, safety and environment, ensuring safety within all activities.Qualifications Education/Experience/Background: • High School Diploma/GED is required., • Requires good reading, math, writing, and verbal communication skills., • Ability to read, and record data from meters, gauges, scales, panels, computer consoles, and other equipment., • Ability to understand/execute written and oral instructions, read/understand technical instructions., • Ability to interpret data and information from technical service manuals and drawings., • Knowledge of Windows, Google Workspace, MS Office Suite, and other computer-based systems., • Knowledge of basic laboratory sampling, testing and documentation., • Ability to adjust chemical feeds and processing equipment as directed to maintain compliance., • Basic knowledge of wastewater treatment equipment and processes., • Must have the ability to maintain effective working relations w/management, supervisors, and staff., • Must be able to work as a team in a teamwork-oriented environment., • Must be safety conscious and able to work independently with little or no supervision., • Valid NYS Driver’s license and the ability to meet risk management guidelines., • Possesses valid NY State Class 1A Wastewater Treatment License is preferred or ability to attend classes required for obtaining valid NY State Wastewater Treatment license and obtain license within 24 months. Additional Information Pay Rate: $22.91 per hour. Benefits: Our employees are covered by comprehensive benefits packages including paid time off policies; health, dental, vision, and life insurance; retirement plans, savings accounts; tuition reimbursement; paid volunteering and more. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job Description KOMAN Government Solutions, LLC (KGS), a wholly-owned 8(a) subsidiary of the Natives of Kodiak (NOK), provides high-quality remediation, consulting, engineering, waste management, munition and construction services. KGS is characterized by our financial stability, positive and profitable growth and an excellent safety record. Our client base includes the U.S. Air Force, U.S. Army, U.S. Army Corps of Engineers, U.S. Marine, Naval Facilities Engineering Command, U.S. Coast Guard, U.S. Department of Agriculture, National Guard Bureau, Federal Aviation Administration, as well as various state, municipal and commercial entities. We have an immediate need for a full-time Treatment Plant Operator located in the vicinity of the Naval Weapons Industrial Reserve Plant (NWIRP), Bethpage, New York. The Treatment Plant Operator is responsible for the operation and maintenance (O&M), monitoring, troubleshooting, and repairing various treatment plants. These may include groundwater treatment plants, wastewater pretreatment/treatment plants, drinking water treatment plants, soil vapor extraction/air sparge (SVE/AS) systems, or other treatment plants. The Treatment Plant Operator is responsible for general plant and property maintenance and implementation of onsite safety and quality control. Benefits: • Our full-time employees are eligible for an outstanding benefits package that consists of medical, dental, vision, life / disability insurance and 401k with match., • Perform Treatment Plant O&M in accordance with prescribed requirements including discharge permit requirements., • Perform instrument calibration/measurement/data recording for operating parameters., • Collect process samples to be shipped for laboratory analysis., • Perform routine maintenance items such as filter changeouts, carbon backwashing, carbon or other media changeouts, pump and motor servicing, and/or any other routine maintenance required., • Respond to system call-outs as required within 4 hours to keep the treatment plants running continuously., • Perform/oversee routine site maintenance including limited mowing and snow removal., • Treat water generating from construction dewatering events., • Perform troubleshooting activities. Assist with repairs and treatment plant upgrades or modifications., • Prepare daily reports to be emailed to the Project Manager., • Prepare monthly reports including discharge monitoring reports, • Oversee onsite activities to monitor compliance with building and safety regulations., • Select tools, materials and equipment and track inventory., • Assist in generating Request for Information and Change Order documents, including labor and materials costs for necessary maintenance., • Prepare internal reports pertaining to job status., • Oversee subcontractors, • Familiarity/experience with operation/control of:, • Remote recovery wells, • Air Stripping, • Bag Filtration, • GAC filtration, • Advance oxidation process (AOP), • Minimum of 5 years of related experience and/or training., • Licensed Wastewater Treatment Plant Operator., • OSHA 40 hr HAZWOPER Training preferred., • Basic mechanical skills to operate, maintain, troubleshoot, and direct repairs on groundwater extraction and treatment system components., • Ability to work in the field on hazardous waste sites., • Must be able to occasionally lift and /or move up to 50 pounds., • Must be a US citizen and can obtain security clearance/badges for access to secure military installations., • Must possess valid US driver’s license and good driving record. As a Federal Contract Employer, KOMAN Families of Companies follows Federal Laws as it pertains to drug testing. All candidates who receive a written offer of employment will be required to undergo drug testing for commonly abused controlled substances in accordance with Federal Law. It is important to note although a State may have legalized a controlled substance, if the controlled substance is illegal per Federal Law, it is then considered to be illegal. KOMAN Families of Companies is a Drug-Free Workplace. Successful completion of a background and DMV record check also must be completed prior to hire. Preference will be given to Natives of Kodiak, Inc. Shareholders and Descendants of Shareholders in accordance with Title 43 U.S. Code 1626(g) and Title 42 U.S. Code 2000e - 2(i) KGS is an Equal Opportunity Employer: Minorities/Women/Veterans/Disabled and other protected categories.

Job Description The Building People, LLC, has a position open for a full-time HVAC/R Technician for the facilities engineering program to support a federal Agency. The HVAC Technician will have a strong focus on operating, maintaining, troubleshooting and repairing facility equipment on all systems. Individuals are expected to demonstrate technical expertise in HVAC trade and be multi-skilled in others (Electrical, Piping/Plumbing, Central Utility Plant Operations) in order to successfully complete daily/weekly work assignments. Responsibilities will include, but not be limited to: • Perform maintenance, monitoring repairs to the Mechanical, Plumbing, Structural, Furniture, Fire, Life Safety, and Control systems for the facility to keep facility and building systems up to applicable standards as assigned, • Maintains responsibility for facility services, corrective maintenance, inventory control, general maintenance and technical proficiency., • Maintenance of the equipment will include cleaning, inspecting, calibrating and changing parts to maintain the HVAC systems and associated equipment at optimum performance levels, • Maintain heating equipment, chillers (air and/ or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc., • Knowledge of the tools, materials, and test equipment used in the installation,, • Maintenance and repair of air conditioning/refrigeration HVAC control systems., • Install, maintain, and repair HVAC controls, including DDC, pneumatic, electric, and electronic controls., • Troubleshoots and repairs HVAC/BAS control problems, including dampers, coils, HVAC steam related controls, air handling equipment, and all types of valves., • Adjusts and calibrates pneumatic/electronic devices to balance all HVAC systems., • Inspects and services controls on a scheduled basis., • Responds to service calls and troubleshoots problems., • Prepares estimates for the repair and/or installation of new Mechanical, Electrical and Plumping systems and makes recommendations for such repairs and services., • Troubleshoots and tests controls using test gauges, amp meters, hydro thermographs, and computers., • Repair equipment and perform corrective maintenance in assigned programmatic area(s)., • Inspect and test equipment / systems to ensure that technical integrity is maintained and if necessary, proposes appropriate corrective action., • Review pertinent technical manuals to remain current with technology and electrical safety codes., • Work indoors & outdoors in the installation and maintenance of a wide - array of technical equipment; use of ladders, safety equipment and ability to navigate rooftops and tight spaces may be required, • Applies technical knowledge to perform simple or routine tasks following detailed instructions., • Receives technical guidance, as required, from supervisor or higher-level technician., • Five (5) years of commercial HVAC/R journeyman level experience., • Communication skills required to interface and coordinate with other technicians., • Must hold EPA Universal level certification per Section 608 of the Clean Air Act., • Must hold NATE, HVAC Excellence Professional/Industry, or UA Star Mastery certification., • Experience setting up and managing BAS schedules, set points, and alarms., • Experience with general RCM practices and procedures., • Capable of performing physical labor including, walking, standing, lift up to 40lbs, pulling, climbing up and down ladders and agility/dexterity to perform duties assigned., • Must be able to successfully pass a government background investigation Preferred Experience & Skills • Familiarity with Niagara, • Skills in Maximo or CMMS Required Education • High School Diploma of GED Equivalent

Company Overview: MaxSolar is a leading provider of Operations & Maintenance (O&M), Asset Management and Technical Services for solar photovoltaic and battery storage systems in the commercial marketplace. As a comprehensive services provider, MaxSolar supports client needs throughout the entire project life cycle. Our programs ensure that system owners receive the maximum energy, environmental, and financial benefits from their assets. Position Overview: The Field Technician is required to troubleshoot and resolve solar PV and battery storage system issues, including emergency repairs/corrective maintenance, design change requirements, and equipment modifications/upgrades. Position will also be responsible for Preventative Maintenance activities to support system performance of O&M portfolio, as well as, QA/QC inspections, system commissioning and pre-con site assessments. Responsibilities: As a Solar Technician/Electrician within the Operations and Maintenance team, you will play a critical role in ensuring the safe, efficient, and reliable performance of solar energy systems. Key responsibilities include: • Performing routine maintenance, inspections, and system checks on solar equipment to ensure optimal performance., • Operating, maintaining, troubleshooting, and repairing equipment issues identified during inspections or daily operations., • Conducting electrical testing, measurements, and diagnostics to identify and resolve electrical issues., • Utilizing a basic understanding of system monitoring platforms to review and analyze performance data, identify trends, and flag potential concerns., • Preparing formal documentation of all field activities, task procedures, and maintenance actions., • Adhering to all safety protocols, company policies, and industry standards., • Providing technical guidance and support to junior technicians as needed., • Demonstrating strong attention to detail in all aspects of work., • Assisting with QA/QC activities, commissioning of new solar installations, and site assessments., • Managing preventive maintenance tasks and deliverables, including independently performing basic electrical tasks., • Conducting advanced testing and troubleshooting, including work on electrically live devices when required and permitted., • Performing lockout/tagout (LOTO) procedures in accordance with established guidelines and safely releasing systems for troubleshooting., • Executing work instructions for both electrical and mechanical repairs on on-site equipment., • Working within distribution-level systems up to 600 VAC and within PV array limits up to 1000 VDC., • Applying low-voltage test equipment, including conducting pre- and post-use inspections, safely connecting instruments, and interpreting test results. Qualifications: • Associates Degree in Engineering or equivalent Technical Certification/Training, • Licensed Electrician and NABCEP certification preferred., • Valid Driver’s license with clean record., • One (1) year minimum experience installing/maintaining commercial scale battery storage systems preferred., • Ability to work remotely and independently., • Project management/field operations management experience preferred., • Previous experience working with power electronic conversion equipment., • Experience with metering and test equipment., • Experience with centralized DAS/SCADA/EMS control systems., • Working knowledge of Commercial Power Plant Operations., • Ability to read electrical/mechanical drawings, equipment manuals and technical specifications., • Familiarity with CMMS based work order/ticketing systems and mobile reporting tools., • Working knowledge of NEC and local building codes and OSHA safety standards (OSHA 30 preferred)., • Ability to efficiently troubleshoot system failures., • Proficient with the use of the Microsoft Office Suite (Word, Excel, PowerPoint, Outlook)., • Must be willing and able to climb ladders, stairs and work on rooftops., • Ability to work in extreme weather conditions. Benefits: • Competitive salary and performance-based incentives, • Health, dental, and vision insurance, • Retirement savings plan, • Opportunities for professional development and career advancement

Job Description Job Title: Field Inspector Company: de Bruin Engineering, PC Location: 1400 Old Country Road, Suite 106, Westbury, NY 11590 Job Type: Full-time About Us: de Bruin Engineering is a leading construction management and civil engineering consulting firm specializing in delivering innovative design and project management solutions for public and private sector clients. We are currently seeking a dedicated and technically capable Field Inspector to join our growing construction management team. This role plays an essential part in ensuring the successful execution of infrastructure projects through on-site inspection, documentation, and quality assurance, with a focus on wastewater treatment plant and related utility infrastructure projects. Job Summary: The Field Inspector will oversee daily on-site construction activities, provide field monitoring and documentation, and support the project team in maintaining compliance with project specifications, safety protocols, and regulatory requirements. The Field Inspector will also perform routine inspections, track field conditions, assist with contractor coordination, and contribute to quality assurance efforts across all phases of construction. The ideal candidate will possess significant experience working on wastewater treatment plant rehabilitation, upgrade, and utility infrastructure projects, including work performed in active treatment facilities with minimal disruption to ongoing operations. Clear communication, strong attention to detail, and effective collaboration with contractors, inspectors, engineers, and operations staff are critical. Key Responsibilities: · Monitor and inspect construction activities to verify contractor compliance with contract documents, and applicable codes and standards. · Prepare daily reports, photographs, field measurements, and material logs. · Identify field issues or discrepancies, communicate observations to the project team, and assist in coordinating timely resolution. · Support coordination by tracking progress and providing field-based feedback to project managers and resident engineers. · Maintain organized and accurate project documentation using digital project management and document control systems. · Coordinate with contractors, third-party inspectors, regulatory agencies, and facility/operations staff to support QA/QC activities and minimize impacts to ongoing plant operations. · Inspect mechanical, electrical, piping, structural, and civil construction activities associated with wastewater treatment facilities, pump stations, force mains, and related infrastructure improvements. · Monitor contractor compliance with environmental, safety, and operational requirements associated with active wastewater treatment facilities. · Assist with project closeout activities, including punch list development, verification of completed work, and collection of as-builts, warranties, and other closeout materials. Requirements: · Minimum of 10 years of construction inspection experience on wastewater treatment plant, water treatment plant, utility, and/or heavy civil infrastructure projects. · Strong familiarity with construction methods, equipment, materials, and inspection standards used in wastewater treatment and municipal infrastructure projects. · Experience working within active wastewater treatment facilities and coordinating construction activities around ongoing plant operations. · Ability to read and interpret construction drawings, specifications, and related documents. · Strong written and verbal communication skills. · Proficiency in Microsoft Office and ability to learn project management software. · Valid driver’s license and ability to travel to various project sites as required. Preferred Qualifications: · OSHA 10-Hour or 30-Hour certification. · Experience with municipal, state, or public agency infrastructure construction projects. · Bachelor’s degree in Construction Management, Civil Engineering, or related field; technical or construction-related training preferred. · Experience with Nassau or Suffolk County Wastewater Treatment work. Why Join Us? · Work on high-profile, technically challenging public infrastructure projects. · Join a collaborative, experienced, and mission-driven team. · Competitive salary and comprehensive benefits package. · Opportunities for training, professional certifications, and career advancement. How to Apply: Please submit your resume and cover letter with "Field Inspector Application" in the subject line

Job DescriptionDescription: Job Description: Responsible for the daily operation, maintenance, preventative maintenance and repairs of building plumbing, electrical, HVAC and all other building systems. Must have working knowledge of all building mechanical, electrical, HVAC, plumbing, life safety, and fire protection systems to ensure proper operations and be able to act upon any conditions that are out of the ordinary. Salary: $83,200.00/yr Availability: On Call 24/7 Essential Job Duties Under the Direction of the Director of Engineering and Operations: 1. Inspect building, grounds and equipment for unsafe or malfunctioning conditions., 2. Conduct, schedule and manage periodic general preventative maintenance on the mechanical, electrical, HVAC, and plumbing systems. This involves normal lubrication, adjustment, cleaning, replacement of consumable parts (such as filters, belts, indicator lights, etc.), and periodic testing of the equipment. These systems include, but are not limited to air handling units, re-circulating air systems, water pumping systems, cooling plant and its associated mechanics and all plumbing system components., 3. Assist with installation and modification of building equipment systems., 4. Respond quickly to emergency situations., 5. Perform and/or oversee electrical and plumbing repair and troubleshooting., 6. Perform and/or oversee mechanical projects., 7. Perform all assigned work to ensure the safety of the building's tenants and the continuous operation of the site., 8. Prioritize service calls and follow-up upon completion., 9. Troubleshoot, evaluate equipment/systems and recommend upgrades., 10. Coordinate maintenance efforts with outside contractors and technicians when work cannot be performed in-house. Coordinate contractor, tenant and management approvals for work orders that require the use of an outside contractor., 11. Order parts and supplies as required and maintain stock and inventory control., 12. Work with the Director of Engineering and Building Manager in planning and controlling annual and capital budgets., 13. Be responsive to tenant complaints in the areas of safety, plumbing, mechanical, electrical and environmental needs through both personal contact and work order systems., 14. Be familiar with and conform to all written operating procedures associated with site., 15. Ensure the cleanliness and appearance of all work areas., 16. Maintain a professional appearance and manner at all times, keep calm demeanor in emergency situations and act as a team member with all staff, 17. Perform other duties as assigned. Skills, Education and Experience: · Minimum of five (5) years of experience in building operations, engineering and equipment and systems maintenance · Ability to handle multiple projects and make decisions · Knowledge and understanding of blueprints · Strong customer service, communication and computer skills inclusive of payroll reporting · High School Diploma or Equivalent Other Job Requirements: · Available and on call 24/7 · Able to lift 50 pounds · Able to climb ladders A detailed scope-of-work will be discussed during the interview process. The requirements and duties described above may be modified or waived by the Company in its sole discretion without notice. Guardian Service Industries is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to, among other things, race, religion, color, national origin, sex, age, marital status, sexual orientation, gender identity, pregnancy, citizenship, status as a protected veteran, or status as a qualified individual with disability, or any other characteristic protected by applicable law. Guardian Service Industries is committed to integrity, excellence, and diversity among its employees. Requirements:

Job DescriptionPlant Manager – Promotional Products & Food Production ???? Hicksville, NY ???? Salary Range: $140,000 – $160,000 ???? About Nassau Candy Nassau Candy is a leading manufacturer and distributor of specialty confections, fine foods, and promotional products. Through divisions such as NC Custom, Chocolate Inn, AmuseMints®, and Lanco, we deliver high-quality, customized solutions with speed, precision, and scale. Our operations are built to support high-volume, high-mix production with rapid turnaround times, often within 24–72 hours, while maintaining the highest standards of food safety and quality. ???? Position Overview We are seeking a high-impact Plant Manager to lead day-to-day operations across a fast-paced promotional products environment, including food and chocolate production, fulfillment, and packaging. This is a hands-on leadership role focused on execution, accountability, and performance. The Plant Manager will own the floor, lead teams across shifts, and ensure the operation is set up for success from close to open every day. ⚙️ Key Responsibilities???? Operational Leadership • Lead all daily plant operations across production, fulfillment, and shipping, • Drive execution to meet aggressive ship dates in a high-volume, short lead-time environment, • Maintain full visibility across all orders and actively “order chase” to ensure nothing falls behind, • Ensure operational readiness from close to open, including staffing, materials, and priorities???? Throughput & Efficiency, • Improve output across all departments, with a strong focus on bottleneck identification and resolution, • Drive labor efficiency and manage payroll within budget expectations, • Implement process improvements to increase throughput without adding unnecessary cost, • Balance workload across departments to maintain consistent production flow???? Team Leadership & Accountability, • Lead, coach, and develop supervisors and production teams across the facility, • Establish and enforce clear performance expectations and daily metrics, • Hold teams accountable to productivity, quality, and safety standards, • Build a culture of urgency, ownership, and continuous improvement???? Scheduling & Execution Alignment, • Partner closely with Scheduling and Planning to ensure realistic, executable production plans, • Ensure alignment between production, packing, and shipping operations, • Monitor real-time performance and adjust labor and resources as needed???? Food Safety & Compliance, • Ensure full compliance with GMP, FDA, HACCP, and all food safety requirements, • Maintain a clean, organized, and audit-ready facility at all times, • Partner with QA/QC to uphold product integrity, consistency, and regulatory standards???? Cross-Functional Coordination, • Collaborate with Customer Service, Sales, and Operations Leadership, • Provide clear communication on order status, risks, and recovery plans, • Support new product launches and ensure operational readiness for new items✅ Qualifications, • 7–10+ years of plant or operations management experience, • Background in food production, packaging, or regulated manufacturing required, • Throughput and capacity management, • Labor planning and payroll control, • Production scheduling and execution, • Proven leadership ability in fast-paced, execution-driven environments, • Strong problem-solving and decision-making skills, • Working knowledge of food safety standards (GMP, FDA, HACCP preferred)???? What We Offer, • Competitive base salary ($140,000 – $160,000) with performance-driven upside, • Comprehensive benefits package, • 401(k) with company match, • Opportunity to lead a mission-critical operation within a growing, family-owned business

Job Description Machine Shop Production Manager We are seeking a highly experienced and hands-on Production Manager to oversee daily machining operations in a fast-paced, high-mix, low-volume production environment. This role is responsible for coordinating labor, equipment, and workflows to meet production goals while driving safety, quality, and continuous improvement initiatives. The ideal candidate will bring a strong technical background in precision machining, effective leadership skills, and a collaborative mindset to align departmental performance with broader operational targets. This position reports directly to Plant Management and plays a critical role in optimizing throughput and ensuring customer delivery expectations are met. Key Responsibilities ▪ Manage the day-to-day operations of the machine shop, including CNC, conventional, and specialty machining equipment ▪ Oversee production schedules, labor planning, and resource utilization to ensure on-time delivery and operational efficiency ▪ Lead a team of machinists, set-up operators, and technical personnel, providing coaching, support, and performance feedback ▪ Collaborate closely with engineering, quality, maintenance, and planning teams to drive throughput, reduce downtime, and resolve technical issues ▪ Monitor key performance indicators (KPIs) such as safety, quality, delivery, and productivity, and report progress to senior management ▪ Support and participate in process improvement initiatives, root cause analysis, and corrective/preventive actions (CAPA) ▪ Identify capacity constraints, machine performance issues, and labor shortages, and implement timely solutions ▪ Coordinate with the Maintenance team to prioritize urgent repairs and ensure adherence to preventative maintenance routines ▪ Enforce and uphold company safety standards and regulatory compliance in accordance with OSHA and internal policies ▪ Foster a culture of continuous improvement, teamwork, accountability, and professional growth on the shop floor Requirements Machine Shop Production Manager We are seeking a highly experienced and hands-on Production Manager to oversee daily machining operations in a fast-paced, high-mix, low-volume production environment. This role is responsible for coordinating labor, equipment, and workflows to meet production goals while driving safety, quality, and continuous improvement initiatives. The ideal candidate will bring a strong technical background in precision machining, effective leadership skills, and a collaborative mindset to align departmental performance with broader operational targets. This position reports directly to Plant Management and plays a critical role in optimizing throughput and ensuring customer delivery expectations are met. Key Responsibilities ▪ Manage the day-to-day operations of the machine shop, including CNC, conventional, and specialty machining equipment ▪ Oversee production schedules, labor planning, and resource utilization to ensure on-time delivery and operational efficiency ▪ Lead a team of machinists, set-up operators, and technical personnel, providing coaching, support, and performance feedback ▪ Collaborate closely with engineering, quality, maintenance, and planning teams to drive throughput, reduce downtime, and resolve technical issues ▪ Monitor key performance indicators (KPIs) such as safety, quality, delivery, and productivity, and report progress to senior management ▪ Support and participate in process improvement initiatives, root cause analysis, and corrective/preventive actions (CAPA) ▪ Identify capacity constraints, machine performance issues, and labor shortages, and implement timely solutions ▪ Coordinate with the Maintenance team to prioritize urgent repairs and ensure adherence to preventative maintenance routines ▪ Enforce and uphold company safety standards and regulatory compliance in accordance with OSHA and internal policies ▪ Foster a culture of continuous improvement, teamwork, accountability, and professional growth on the shop floor

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: In coordination with Plant Manager the incumbent will be responsible for providing the day to day oversight of department staff, shift operations, troubleshoot equipment problems and generate work orders as needed, as well as providing operational, commercial and personnel leadership to the plant shift operating teams to maintain efficient and cost effective facility operations while maintaining compliance with all Corporate and Regulatory environmental, health and safety rules and requirements. Primary Duties/Responsibilities: • Must possess and maintain a NYS 3A wastewater certification - ability to be delegated as Operator in charge., • Supervises a staff of Plant Operators – trainees, 1A licensed Operators, 2A licensed Operators and 3A licensed Operators and directs their daily duties in accordance with the requirements of the Plant., • Work with other plant departments, Engineering, and contractors to coordinate projects., • Lead and guide shift crews to monitor all facets of plant operations and incoming data., • Ability to stand watch on an assigned Operation station in the event of emergency or staffing issues., • Reviews all operations station worksheets for anomalies and errors., • Checks worksheets prior to entering data or turning over for data entry into Hach Wims., • Assists operations staff with troubleshooting operational issues., • Performs visual observations of the various process areas over the course of the shift to ensure all compliance and safety measures are being met., • Ability to process laboratory data to make process control change suggestions., • Ability to calculate MCRT, SVI, Detention Time, Hydraulic Loading and other related process control measures., • Maintains a log book for plant operations during assigned shift., • Manage, evaluate, schedule, and develop the O&M staff and always ensure adequate staffing., • Coordinate alternate staff in the event of absences following the Overtime equalization policy., • Provides leadership and directing in response to alarms and abnormal conditions and lead emergency response actions., • Independently evaluates and/or supervises the evaluation of the operation, maintenance and performance of wastewater treatment facilities, processes, systems, and equipment., • Reviews, and supervises implementation of system improvements including analyzing and optimizing existing system designs and operating parameters, supervising performance testing and troubleshooting and resolving complex operational, equipment and instrumentation problems., • Reviews designs and constructed facilities and makes and approves recommendations for operational improvements., • Oversees construction management personnel in implementing changes required during facilities upgrades and startup, supervises the work of operational services, treatment plant construction personnel in startup and initial operation of new or upgraded wastewater treatment facilities, processes, systems, and equipment., • Participate in the development and compliance of operating policies ensuring compliance to all environmental and safety rules., • Complete reports which document plant status, equipment, operating data, and operational events., • Collect data on unplanned outages and make recommendations to minimize the probability of similar events., • Serves as the real-time shift interface with the Commercial Group with respect to plant operations, outages, fuel, generations schedules., • Perform Issuer and Verifier functions utilizing the approved Lock Out/Tag Out systems to help ensure that safe systems are always in place., • Manage Department contract deliverables and scheduling., • Responsible for ordering of materials and supplies., • Ensures all equipment and processes are well maintained and functioning properly., • Ensure that workstations and Treatment plant facilities are clean and safe in accordance with all regulatory requirements., • Maintain proper operational documents and records., • Assure work is performed in a safe and professional manner by following all corporate and regulatory policies, procedures, and emergency response procedures., • Operates equipment and processes manually and through instrument control panels., • Work an assigned shift which may include weekends and holidays, Respond to emergencies, work additional hours to complete required tasks as/and when needed., • Operate company and client owned vehicles., • Work is performed both inside and outside with exposure to all kinds of weather conditions., • Incumbents may be occasionally exposed to some noise, sewage, silica, dust, fumes, smoke, gasses, greases, oils, electrical energy, solvents, and vibrations., • Incumbents may work on slippery/uneven surfaces, around machinery with moving parts, moving objects/vehicles, and ladder/scaffolding, below ground and may be exposed to water and other liquid materials.Qualifications Education/Experience/Background: • High School Diploma/GED is required., • Bachelor’s degree (or equivalent experience) in Environmental Science, Engineering, Biology/Laboratory, or related fields preferred., • 5+ years of experience working in a plant operations position., • Strong process control knowledge is a must., • Excellent reading, math, writing, scientific, and verbal communication skills., • Excellent organizational, scheduling, and prioritizing skills and abilities., • Ability to read and interpret data from maps, engineering drawings, blueprints, gauges and graphs., • Ability to understand/execute written and oral instructions, read/understand complex technical instructions., • Ability to read, interpret, and record data from meters, gauges, scales, panels, and computer consoles., • Ability to interpret service manuals and drawings and write SOPs., • Excellent troubleshooting/problem solving skills, provides input for corrective actions and implements corrective actions as needed., • Proficient in Windows, MS Office Suite, Google Workspace, OPS, EAM & CMMS, and other computer-based systems., • Working knowledge of computerized PLC/SCADA systems, DCS control systems, computerized operating data acquisition and historical trending systems., • Working knowledge and skills of equipment specific to departmental needs and requirements., • Knowledge of and ability to perform standard laboratory sampling, testing, and documenting and maintaining all related records and reports., • Knowledge of normal and abnormal process and equipment conditions and capable of taking appropriate, safe actions., • Ability to operated complex controls, processes, and equipment., • Knowledge of wastewater treatment plant equipment and processes., • Knowledge of wastewater treatment plant regulations, requirements & reporting., • Knowledge of proper Environmental, Health and Safety policies, procedures, and requirements., • Must be capable of being assigned in responsible charge of the facility with the ability to react to unplanned events., • Must have the ability to maintain effective working relations w/management, supervisors and staff., • Must have the ability to make decisions with no supervision., • Proven ability to successfully manage time and prioritize work., • Must be able to communicate well w/individuals at all skill, knowledge and experience levels., • Must be able to lead by example, lead, train and mentor all staff and team support personnel., • Must have the ability to lead department/team effectively in all situations under any conditions., • Must be able to work closely with local contractors and vendors., • Must be able to work as a team in a teamwork-oriented environment., • Valid NYS Driver’s license and the ability to meet risk management guidelines., • While performing the duties of this Job, the employee is regularly required to talk or hear., • The employee is frequently required to stand; walk; sit; use hand to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl or smell., • The employee must occasionally lift and/or move up to 50 pounds., • Specific vision abilities required by this include close vision and distance vision. Additional Information Pay Range: $90000 to $100000 per year. Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: The incumbent is primarily responsible for the loading of Bio-Solids into trailers. In addition, the incumbent will participate in the maintenance and repair of buildings and grounds. The incumbent will possess a basic knowledge of maintenance and all wastewater hazards. Primary Duties/Responsibilities: • Bio-Solids Loading Tasks:, • Tarping and un-tarping trailers., • Monitor loading operations to ensure contractual requirements are met., • Open and close charging chutes to allow the trailers to be loaded evenly., • Weigh empty & full trailers, print weight tickets., • Manifest loaded trailers., • Ensure trailers are properly filled and that solids are reasonably leveled off., • Charge or fuel yard mule., • Check fluids, hydraulics and air pressure systems in the yard mule., • Check tire pressure in the yard mule., • Perform daily vehicle safety inspection of the yard mule and turn over paperwork to Operations Supervisor., • Clean the truck bay of any accumulated debris or solids., • Ensure truck bay drains are clear of debris., • Assist centrifuge operator with cleaning the Dewatering Building process area., • Ensure no solids or liquids exit the loading area pursuant to NYSDEC spill regulations., • Check the sludge trailer infrastructure, tractor & tractor tires for any accumulated bio-solids prior to moving the trailer from the loading bay., • Check third party vendors trailers to ensure they are roadworthy, are free of debris, holes or other issues that could cause a sludge release, and the braking system operates properly., • Notify the Operations supervisor on duty of any issues immediately., • Laborer Tasks:, • Perform custodial and clean-up work on plant grounds including cutting grass, snow removal and trash pick-up. Perform custodial work in buildings including, but not limited to, sweeping, mopping, waxing, buffing, washing windows scrubbing walls and vacuuming., • Perform manual labor functions as assigned., • Perform minor maintenance services on vehicles and equipment including, but not limited to, washing, tightening chains, replacing cables and bolts, checking tire inflation and performing lubrication according to the manufacturers’ recommended schedules., • Perform regular checks of equipment condition, noting deficiencies and following maintenance scheduling procedures, schedule the necessary maintenance or replacement., • Clean and prepare surfaces to be painted. Apply paint and varnish to buildings and equipment., • Recommend materials and supplies needed both to advise management on specific applications and to maintain inventory., • Observe all on-the-job safety regulations., • Work is performed both inside and outside with exposure to all kinds of weather conditions., • Incumbents may be occasionally exposed to some noise, silica, dust, fumes, smoke, gasses, greases, oils, electrical energy, solvents and vibration., • Incumbents may work on slippery/uneven surfaces, around machinery with moving parts, moving objects/vehicles, ladder/scaffolding, below ground and may be exposed to water or other liquid materials., • Maintain a high level of focus on health, safety and environment, ensuring safety within all activities. Qualifications Education/Experience/Background: • High School Diploma/GED is required., • At least one (1) year of related trade experience., • Experience in loading trailers., • Ability to communicate written and orally., • Ability to adhere to all policies and regulations regarding safety and compliance., • Able to utilize materials, methods, tools and equipment used in the day-to-day maintenance of buildings and grounds., • Knowledge or/and ability to safely operate all hand or power tools equipment related to the job., • Vehicle and Heavy Equipment Operations:, • Yard Horse, • Pickup Truck(s), • Forklift or other Powered Industrial Truck, • Hold and maintain a NYS driver’s license - Commercial Driver’s License Class “A” Preferred. Additional Information Pay Rate: $20.65 per hour. Benefits: Our employees are covered by comprehensive benefits packages including paid time off policies; health, dental, vision, and life insurance; retirement plans, savings accounts; tuition reimbursement; paid volunteering and more. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job Description🌟 Be a Part of Something Bigger! 🌟 At Luminator Technology Group, we believe we are Better Together. We always put the Customer First, focus on achieving Results, strive to Be the Best, and foster a culture of Respect & Trust. We are on a mission to innovate and revolutionize global transportation technology. Luminator is a global leader spanning over 85 countries and nearly 1,000 employees worldwide. We’re searching for a Field Service Technician - NICE & NYCT to join our growing Product Support team and play a key role in driving our vision forward. What You’ll Do: As a Field Service Technician, you will be at the heart of our customer success, providing hands-on expertise to maintain, troubleshoot, and repair cutting-edge transit equipment. You’ll: • Maintain and troubleshoot Luminator’s hardware and software., • Handle customer inquiries and provide technical support., • Stay current with company products, installation methods, and safety guidelines., • Perform on-site pre-start-up, start-up, service work, warranty, and training., • Diagnose and resolve technical issues., • Accurately document all work performed, including preventive and corrective maintenance., • Communicate effectively with plant operators, management, vendors, and team members., • Review product prints and specifications., • Participate in projects such as upgrades and new installations., • Ensure products are installed to specifications., • Coordinate with other teams to meet commitments., • Document processes and follow company protocols., • Operate vehicles safely and use field systems appropriately., • Collaborate with the technical team and share information., • Technical Savvy: Proficiency with electrical systems, automotive wiring, voltmeters, and small tools., • Customer Focus: Strong interpersonal skills to handle demanding situations and deliver exceptional service., • Problem-Solving Skills: Ability to diagnose, resolve, and communicate complex technical issues effectively., • Qualifications:, • 2-4 years of technical experience., • High school diploma or equivalent (AS degree and A+ certification preferred)., • Familiarity with tools like MathWorks, AutoCAD, Microsoft Visual Basic, and SCADA software is a plus., • Competitive compensation with career growth potential., • Generous time off: Vacation and sick time, 10 company holidays, and 2 floating holidays., • Educational Assistance Program: Robust reimbursement program for professional growth., • Health and wellness: Medical, dental, and vision coverage plus 401k matching. Luminator Technology Group intends to provide a safe and drug-free work environment for our customers and our employees. As a condition of employment Luminator Technology Group will require a negative drug screen during the pre-employment process due to working on or with federal contracts. It is the policy of Luminator to ensure equal employment opportunity without discrimination or harassment on the basis of race, color, religion, sex, sexual orientation, gender identity or expression, age, disability, marital status, citizenship, national origin, genetic information, or any other characteristic protected by law. Luminator prohibits any such discrimination or harassment. The above described responsibilities and requirements are a general guide for the role you are applying for and are not all inclusive of the job requirements. Luminator Technology Group does not accept staffing agency candidates for our postings. All positions posted are required to be in office unless otherwise posted. Powered by JazzHR NupiwBG7Xi

Job Description The Corporate Source is a nonprofit organization dedicated to promoting the employment of people with disabilities and providing services leading to independence and fulfillment. Individuals with disabilities are encouraged to apply! This job is part of the AbilityOne program, one of the largest sources of employment in the United States for people who are blind or have significant disabilities. To learn more, go to: The Corporate Source offers an excellent benefits package including: 100% employer-paid health, dental, vision, life insurance, long-term disability (LTD)coverage as well as retirement contributions Specific Job Responsibilities: (Minimum) • To clean and keep in an orderly condition building work areas and washrooms, or premises of an office, apartment house, commercial or another establishment, • To sweep, mop or scrub, and polish floors, • To remove chips, trash, and other refuse, • To dust equipment, furniture, or fixtures, • To polish metal fixtures or trimmings, • To provide supplies and minor maintenance services, • To clean lavatories, showers, and restrooms, • Demonstrated commitment to our mission of creating and advancing employment opportunities for people with disabilities., • Aspire to the highest possible standard of excellence in the performance of your job responsibilities., • Represent The Corporate Source (TCS) in a professional and courteous manner, and to work and communicate constructively with the other members of your team., • Where a question arises, to seek clarification from your supervisor, project manager, or from senior management of TCS., • Meet with your direct supervisor as needed to provide all materials or updates regarding work required in a timely and professional manner., • Immediately report to your supervisor any and all physical plant problems which may bring risk to anyone, affect the proper operation of the program, or result in noncompliance of regulations., • Ensure that assigned work areas are free from potential safety hazards., • Adhere to all policies and professional standards set forth by The Corporate Source, including but not limited to ensuring that your workplace is free of all forms of harassment, sexual harassment and discrimination. You are required to contact your supervisor, Project Manager, or the Director of Human Resources if you believe you have been subject to or observed such behaviors., • To be fully aware of all regulations and policies set forth in your work site’s Procedures Manual, as well as The Corporate Source’s Employee Handbook, and to participate in all required orientation and training workshops., • Ability to lift 50 pounds Monday - Friday 8:00am - 3:30pm

Being reliable and dedicated to safety has defined our success as an industry leader for 130 years. This includes understanding work instructions, safety protocols, and communications essential to the role. The requirement is directly related to the nature of the job and ensures compliance with work

At CVS Health, you'll be surrounded by passionate colleagues who care deeply, innovate with purpose, hold ourselves accountable and prioritize safety and quality in everything we do.

Building Maintenance Technician.Are you an experienced Maintenance Technician ready to join our fantastic team of professionals? MMS Group is on the hunt for someone like YOU! Our Maintenance technicians are responsible for the maintenance operations related to apartment home upkeep and unit turns.M

Being reliable and dedicated to safety has defined our success as an industry leader for 130+ years. This includes understanding work instructions, safety protocols, and communications essential to the role. The requirement is directly related to the nature of the job and ensures compliance with wor

Safety Focus - Operate a commercial vehicle in a safe and responsible manner, follow defined safe work practices, and complete DOT required documentation on a daily basis. Adhere to our safety policies which include the prohibited use of electronic devices while driving and reporting any on-the-job

Certified Safety Professional (CSP) or Construction Health and Safety Technician (CHST) designation. We are seeking a proactive, detail-oriented Site Safety Manager (SSM) licensed by the NYC Department of Buildings to oversee on-site safety compliance for active construction projects. The SSM will p

As an Assistant Manager, you set the tone for the store and the team and help bring our brand to life for our customers.You're responsible for driving profitable sales growth through all aspects of the store including; customer and product operations, merchandising, and talent development.You are re

Zone Recovery) to maintain cleanliness and organization of store and working areas Maintains a safe and secure work environment, which may include conducting daily safety reviews, noting hazards, keeping aisles clear, and securing doors and gates Adheres to all safety requirements relevant to one's

Location: 1 Rexford Way, Halfmoon, NY, 12065, United States.Job Category: Parts, Driver, Truck.Description Requirements Summary.Description Requirements Summary.

A strong focus on safety and adherence to standard operating procedures is essential, with the goal of consistently meeting performance targets.

Being reliable and dedicated to safety has defined our success as an industry leader for 130 years. This includes understanding work instructions, safety protocols, and communications essential to the role. The requirement is directly related to the nature of the job and ensures compliance with work

East Greenbush, NY Location - East Greenbush, NY 12061.Hourly Position Type Full Time Job Shift Day Shift Education Level GED Travel Percentage None Category Transportation.J Polep Distribution services is one of the largest distribution operations servicing the Convenience Store Market in the North

A strong focus on safety and adherence to standard operating procedures is essential, with the goal of consistently meeting performance targets.

Being reliable and dedicated to safety has defined our success as an industry leader for 130 years. This includes understanding work instructions, safety protocols, and communications essential to the role. The requirement is directly related to the nature of the job and ensures compliance with work

Top performers may earn up to $130k 401K with 2% automatic company contribution plus company match up to an additional 6% Medical Benefits Start Day One! We offer weekly pay, low-cost Medical, Dental, and Vision for Family Coverage Our drivers are home nightly Paid vacation time, sick, and personal

Now hiring an experienced FedEx Delivery Driver to load packages into a vehicle, plan routes, and ensure timely residential and business deliveries.Work closely with your team to maintain efficiency and accuracy.Deliver excellent service to customers and coworkers.Perks include competitive pay, flex

JobID: 929542494E61437786AA5E3CD86B43BB [Route Driver] As a Delivery Driver at Honey Baked Ham, you'll: Arrive at HUB store to get product for Pop-Up Retail locations; Complete Truck Assessment checklist at the start of each delivery day; Ensure that products are secured in the truck using straps or

Amazon delivery partner opportunity – Earn $22.It's simple! Use your vehicle and smartphone to earn extra money delivering with a brand you trust.With Amazon Flex, you only deliver when you want to.Amazon Flex pays delivery partners for completing delivery blocks.When you schedule a block, you’l

Hajoca Corporation - - Responsibilities: Own the end-to-end delivery process ensuring safe, compliant, on-time deliveries.

Top performers may earn up to $130k 401K with 2% automatic company contribution plus company match up to an additional 6% Medical Benefits Start Day One! We offer weekly pay, low-cost Medical, Dental, and Vision for Family Coverage Our drivers are home nightly Paid vacation time, sick, and personal

Primo Water - - Responsibilities: Operate a commercial vehicle in a safe and responsible manner and complete DOT documentation daily; Provide premium customer service and deliver products to customers on schedule; Maintain delivery information on accounts including cash and receipts; Identify oppor

Protective equipment required: steel or composite toe boots, safety vest, safety harness , seatbelt, SRL (self-retracting lifeline). All team members must be able to adhere with safety and manufacture guidelines for compliant use of all protective equipment.