Plant safety jobs in Carteret, New JerseyCreate job alerts

Responsibilities: \n\n • Follows, without exception, all work instructions and safety policies, including use of all PPE and safety equipment\n, • Performs routine preventive maintenance checks on all production equipment and machinery\n, • Repairs basic mechanical components and replace parts on machines such as bearings, filters, wiring, valves, gauges and switches\n, • Observes and listens to mechanical devices in operation to locate causes of problem\n, • Dismantles devices to gain access to and remove defective parts\n, • Lubricates and cleans machinery and support equipment to maintain housekeeping and preventive maintenance standards within the plant\n, • Accomplishes all work orders to maintain safety; reduce downtime; decrease scrap; improve quality production; and improve plant efficiency\n, • Follows all safety rules and procedures including Lockout/Tagout program, housekeeping and observes the operations to insure a safe work environment \n, • High School Diploma or GED\n, • 3-5 years’ experience in a maintenance-related position within a manufacturing environment; or equivalent combination of training and experience\n, • Ability to interpret documents such as procedure manuals, blueprints, schematics, charts, diagrams, etc.\n, • Ability to use precision measuring devices including amp meters, electric meters, and hydraulic gauges\n, • Basic understanding of systems, equipment and schematics\n, • Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Good troubleshooting skills\n, • Basic mathematical skills used to add, subtract, multiply, divide, and use decimals and fractions\n Mauser Packaging Solutions is that company. Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team. At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers better—and help them be better stewards of the environment. Whether you’re a seasoned professional—or just beginning your career—there’s a place where you can help make a difference at Mauser Packaging Solutions. Join us!\n\n \n\n\n Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status. \n Benefits: Mauser Packaging Solutions offers a comprehensive benefits package, including medical, dental, paid time off, and other competitive benefits.

Essential Functions • Follow, without exception, all safety policies /safety rules, and procedures., • Follow all work instructions, both written and oral., • Required to keep shop and work areas in a safe and tidy condition, following 6S standards., • Required to perform all facility maintenance., • Ability to perform work in a mature and professional manner, demonstrate personal responsibility, and perform all assigned duties., • Ability to trouble shoot/solve mechanical breakdowns in areas consisting of old and new equipment, while communicating with production and maintenance manager., • Perform mechanical repairs and replace parts on machines such as bearings, valves, filters, gauges, switches, etc., • Perform routine preventive maintenance on all production equipment and machinery, such as a resistance welder, seamer, automated paint booth, conveyors, curing ovens, etc., • Assist in machine changeovers and start-up of machines for production needs when required., • To identify improvements, advise and correct potential problems., • Assist in maintaining safety; reduce downtime; decrease scrap; improve quality production; and improve plant efficiency., • Perform and oversee electrical troubleshooting (AC/DC motors, controls panels motor drivers, etc.), • Ability to use ladders, scissor lift, forklift, milling machine, lathes, drill presses, welder and hand tools to complete repairs., • Ability to use precision measuring devices including amp meters, electric meters, hydraulic gauges, Etc., • Lead/coach and mentor maintenance technicians fostering skilled development and productivity., • Assign daily tasks and prioritize maintenance work orders in alignment with production needs., • Teach expertise of equipment in diagnostics and trouble shoot while providing guidance and training for all maintenance techs, • Recommend process and equipment improvements and enhance safety, efficiency, and product quality., • Collaborate with management and other departments on cross functional initiatives., • Industrial Maintenance Millwright Certificate or Qualified Mechanic., • 4-6 years of direct hands-on experience with production equipment maintenance and repair., • Electrical knowledge of 3 phase and DC systems., • Knowledge of industrial electrical, control, and instrumentation systems. Examples include control relay logic; voltage control schemes; photo-eyes; distance and pressure transducers; etc., • Forklift Certified - Ability to operate a forklift safely to eliminate personal injury and material damage., • Ability to lift 55 lbs. overhead, climb, bend, stoop, push and pull., • Must possess excellent communication skills, professional maturity, and a proactive mindset., • Requires good eye/hand/foot coordination., • Good visual acuity – cannot be colorblind., • Must be able to stand for extended periods., • Must be able to work in cold, heat and dusty environment; it includes occasional work outside in the elements., • Ability to safely operate all equipment and tools. Mauser Packaging Solutions offers a comprehensive benefits package, including medical, dental , paid time off, and other competitive benefits. Do you want to work with people who are dedicated to innovation and making the world a better place? Do you want to build a career with a company that provides opportunities for growth and development? Mauser Packaging Solutions is that company. Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team. At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers better—and help them be better stewards of the environment. Whether you’re a seasoned professional—or just beginning your career—there’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status. Benefits: Mauser Packaging Solutions offers a comprehensive benefits package, including medical, dental, paid time off, and other competitive benefits.

Responsibilities: • Follows, without exception, all work instructions and safety policies, including use of all PPE and safety equipment, • Performs routine preventive maintenance checks on all production equipment and machinery, • Repairs basic mechanical components and replace parts on machines such as bearings, filters, wiring, valves, gauges and switches, • Observes and listens to mechanical devices in operation to locate causes of problem, • Dismantles devices to gain access to and remove defective parts, • Lubricates and cleans machinery and support equipment to maintain housekeeping and preventive maintenance standards within the plant, • Accomplishes all work orders to maintain safety; reduce downtime; decrease scrap; improve quality production; and improve plant efficiency, • Follows all safety rules and procedures including Lockout/Tagout program, housekeeping and observes the operations to insure a safe work environment, • High School Diploma or GED, • 3-5 years’ experience in a maintenance-related position within a manufacturing environment; or equivalent combination of training and experience, • Ability to interpret documents such as procedure manuals, blueprints, schematics, charts, diagrams, etc., • Ability to use precision measuring devices including amp meters, electric meters, and hydraulic gauges, • Basic understanding of systems, equipment and schematics, • Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Good troubleshooting skills, • Basic mathematical skills used to add, subtract, multiply, divide, and use decimals and fractions Mauser Packaging Solutions offers a comprehensive benefits package, including medical, dental, paid time off, and other competitive benefits. Do you want to work with people who are dedicated to innovation and making the world a better place? Do you want to build a career with a company that provides opportunities for growth and development? Mauser Packaging Solutions is that company. Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team. At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers better—and help them be better stewards of the environment. Whether you’re a seasoned professional—or just beginning your career—there’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status. Benefits: Mauser Packaging Solutions offers a comprehensive benefits package, including medical, dental, paid time off, and other competitive benefits.

Assistant Plant Manager Linden, NJ Full-time, Onsite (First Shift) $75,000–$85,000 base salary + performance bonus Typically 5:30 AM–3:30 PM, with occasional weekend coverage (Sun–Thurs or Tues–Sat rotation) About the Opportunity An established industrial production facility specializing in high-volume textile and uniform services is seeking a hands-on Assistant Plant Manager to join its leadership team. This role supports a 100+ year-old, fast-growing organization recognized for innovation, quality, and operational excellence. The ideal candidate will be a driven, organized leader with a proven background in plant operations and team development within a high-throughput production or service environment. Key Responsibilities • Oversee daily production activities, ensuring output, quality, and customer delivery standards are consistently met., • Supervise multiple Production Supervisors and department leads across shifts to maintain workflow efficiency and accountability., • Monitor and report on production metrics, performance, and any operational issues impacting output or service., • Lead workforce planning, including hiring, scheduling, training, and performance management for production teams., • Coach and mentor supervisors and team members to build internal talent and prepare staff for promotion opportunities., • Maintain compliance with safety regulations (OSHA, labor laws, and company policies), ensuring a clean and safe work environment., • Collaborate cross-functionally with maintenance, logistics, and customer service teams to resolve operational challenges quickly., • Manage labor costs and production budgets, identifying opportunities to improve efficiency and reduce waste., • Maintain strong communication with internal teams and external clients to uphold service quality and resolve any escalated issues., • Drive a culture of continuous improvement through proactive problem-solving, workflow optimization, and data-driven decision-making. Requirements • Minimum 5 years of supervisory or 1+ year of managerial experience in a high-volume plant or production environment., • At least 2 years of customer service or client-facing experience handling service-related demands., • Proven understanding of production workflow, scheduling, and team coordination., • Proficiency with Microsoft Office (Word, Excel, Outlook) and general computer literacy for reporting and communication., • Strong leadership and communication skills with the ability to motivate teams in a fast-paced environment., • Familiarity with safety compliance, OSHA standards, and workplace regulations., • Bilingual (English/Spanish) preferred.

Perform repairs and inspections, safety checks, diagnosis and repair of electrical, hydraulics on plant equipment. Utilize computer electrical systems to interpret failure modes to identify and adjust plant machinery. Troubleshoot and perform electrical and mechanical repairs as needed on the plant

Clean Harbors Linden, NJ facility is seeking an Operations Supervisor to our safety conscious team! The Operations Supervisor is responsible for daily activities and general oversight for plant operations which includes rail operation (tanker to railcar transfer) and oily water separation.

Reporting to the Technical Director and Vice President of Manufacturing Operations and Technical, the Plant Quality Manager is responsible for leading all aspects of the Quality Assurance and Food Safety/Defense programs at a food manufacturing facility. Lead development and implementation of facili

Essential Functions \n\n • Follow, without exception, all safety policies /safety rules, and procedures. \n, • Follow all work instructions, both written and oral. \n, • Required to keep shop and work areas in a safe and tidy condition, following 6S standards. \n, • Required to perform all facility maintenance. \n, • Ability to perform work in a mature and professional manner, demonstrate personal responsibility, and perform all assigned duties.\n, • Ability to trouble shoot/solve mechanical breakdowns in areas consisting of old and new equipment, while communicating with production and maintenance manager.\n, • Perform mechanical repairs and replace parts on machines such as bearings, valves, filters, gauges, switches, etc.\n, • Perform routine preventive maintenance on all production equipment and machinery, such as a resistance welder, seamer, automated paint booth, conveyors, curing ovens, etc.\n, • Assist in machine changeovers and start-up of machines for production needs when required.\n, • To identify improvements, advise and correct potential problems.\n, • Assist in maintaining safety; reduce downtime; decrease scrap; improve quality production; and improve plant efficiency. \n, • Perform and oversee electrical troubleshooting (AC/DC motors, controls panels motor drivers, etc.) \n, • Ability to use ladders, scissor lift, forklift, milling machine, lathes, drill presses, welder and hand tools to complete repairs.\n, • Ability to use precision measuring devices including amp meters, electric meters, hydraulic gauges, Etc.\n, • Lead/coach and mentor maintenance technicians fostering skilled development and productivity.\n, • Assign daily tasks and prioritize maintenance work orders in alignment with production needs.\n, • Teach expertise of equipment in diagnostics and trouble shoot while providing guidance and training for all maintenance techs\n, • Recommend process and equipment improvements and enhance safety, efficiency, and product quality.\n, • Collaborate with management and other departments on cross functional initiatives.\n, • Industrial Maintenance Millwright Certificate or Qualified Mechanic.\n, • 4-6 years of direct hands-on experience with production equipment maintenance and repair. \n, • Electrical knowledge of 3 phase and DC systems.\n, • Knowledge of industrial electrical, control, and instrumentation systems. Examples include control relay logic; voltage control schemes; photo-eyes; distance and pressure transducers; etc.\n, • Forklift Certified - Ability to operate a forklift safely to eliminate personal injury and material damage.\n, • Ability to lift 55 lbs. overhead, climb, bend, stoop, push and pull.\n, • Must possess excellent communication skills, professional maturity, and a proactive mindset.\n, • Requires good eye/hand/foot coordination.\n, • Good visual acuity – cannot be colorblind.\n, • Must be able to stand for extended periods.\n, • Must be able to work in cold, heat and dusty environment; it includes occasional work outside in the elements.\n, • Ability to safely operate all equipment and tools.\n Mauser Packaging Solutions is that company. Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team. At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers better—and help them be better stewards of the environment. Whether you’re a seasoned professional—or just beginning your career—there’s a place where you can help make a difference at Mauser Packaging Solutions. Join us!\n\n \n\n\n Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status. \n Benefits: Mauser Packaging Solutions offers a comprehensive benefits package, including medical, dental, paid time off, and other competitive benefits.

Job DescriptionCompany Description Headquartered in Cordova, TN, Stratas Foods is a 50/50 joint venture formed in October 2008 between ACH Food Companies and Archer Daniels Midland Company. Stratas Foods is built on the combined strengths and expertise of these two great parent companies, laid down over the course of over 200 years of combined experience. Stratas will continue to build on this foundation of excellence by providing value added, branded and custom formulated fats and oils solutions to the Food Service, Food Ingredient and Retail sectors. At Stratas Foods we are committed to being the most valued supplier of fats, oils, dressings, mayonnaise and salad dressings to the private label retail bottled oils market in the United States. Manufacturing facilities are located in Dallas and Houston, TX; Decatur and Quincy, IL; Englewood, NJ; Hillside, NJ; Fresno, CA; Nashville, TN; and Valdosta, GA. Corporate offices are located in Memphis, TN. We are committed to maintaining a progressive workplace by utilizing the ideas, skills and talents of all of our employees. We strive to make Stratas Foods a great place to work and are building a team capable of meeting our business goals. Our drivers stay in the tri-state area! Drivers can make an average up to $1,600+ per week! New equipment Additional incentives per day: • 2nd Trip (roundtrip), • 3rd Trip (roundtrip), • Single Trips (over 300 miles), • Pickups, • Ryder, • Pallet breakdowns, • Stops, • Detentions, • Trailer moves, • Bottles movesJob Description To perform routine skilled work in the operation of motor trucks and light duty motor equipment. The qualified applicant’s job duties is to be performed keeping safety as a primary objective and following established GMP, Safety and Stratas Foods procedures and policies. Responsibilities • The CDL A Driver is responsible to deliver full trailer loads of 20 plus pallets to Stratas Foods customers throughout the Northeast. Driver will deliver to a 250-mile radius home every night. Minimal handling of product - electric jacks used to move freight. Monday through Friday workweek. Occasional weekends, • Prepares and maintains appropriate paperwork and records related to shipment of deliveries., • Maintains vehicle and equipment operational records., • Requires obtaining and exchanging information, referring inquiries to the appropriate source, or responding to questions regarding shipments., • Knowledge of state laws pertaining to the operation of equipment on highways Qualifications Education: High School Diploma, GED or Equivalent Required. Must possess a valid CDL Class A New Jersey driver's license! The job is performed in both a office and manufacturing plant environment. Exposure to loud noises, dust, dirt, heat, sparks, oil, and smoke may occur. Personal protective equipment (safety glasses, steel toed shoes, appropriate clothing, hard hat) is required in manufacturing plants. Activities include extended periods of sitting and standing. • 3 – 5 years’ experience in operating motor driven equipment., • Knowledge of the principles of operation of motor equipment sufficient to detect defective operation., • Clean driving record - must have an updated MVR, • Updated DOT Physical card, • Able to pass a road test, • Knowledge of the North East Region, • Knowledge of the food service industry a plus, • Have the ability to drive either manual or automatic transmissions., • Drive new updated equipment, • Starting time varies based on location being delivered., • Occasional weekends Additional Information Requires heavy work, including strenuous activities such as reaching, bending, or lifting 50 lbs or more as well as performing work activities which require fine manual dexterity or coordination in operating truck. Ability to communicate (verbal and written) with management and co-workers is critical. Regular use of a variety of measuring tools, a telephone, and e-mail for communication is essential. Standing or sitting for extended periods is common. Hearing and vision within normal ranges is important for conversations, to receive ordinary information. Good math and reasoning ability is essential. Able to apply general mathematical calculations, analysis of variance, and other basic standard equations as required. Drivers can make an average up to $1,600+ per week! Additional incentives per day: • 2nd Trip (roundtrip), • 3rd Trip (roundtrip), • Single Trips (over 300 miles), • Pickups, • Ryder, • Pallet breakdowns, • Stops, • Detentions, • Trailer moves Benefits: Medical, Dental, Vision Stratas Foods is an equal opportunity employer and will not discriminate against any applicant or employee in any manner prohibited by law, including but not limited to, on the basis of race or color, religion, gender, age, genetic information, national origin/ancestry, mental or physical disability, family status/marital status, military/veteran status, and any other legally protected status. Pay Transparency Nondiscrimination Provision-The Employer will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the Employer’s legal duty to furnish information. 41 CFR 60-1.35(c) Stratas Foods Applicant Request for Accommodation Form: Stratas Foods California Privacy Rights Act Policy:

Job DescriptionBenefits: • 401(k), • Bonus based on performance, • Health insurance, • Opportunity for advancement, • Paid time off, • Training & development Job Summary We are seeking an experienced Program Administrator to join our team! As a Program Administrator you will oversee all of the day-to-day operations of the clinic and staff. This will include hiring and training staff, overseeing programs and developing both current and new programs, ensuring regulations on a state and federal level are being followed properly, and continually maintaining client and staff satisfaction. The ideal candidate is self-motivated, focused, and has a clear understanding of what it takes to run a successful clinic. Program Administrator's responsibilities: -Providing administrative oversight of the facility -Ensuring the development, implementation, and enforcement of all policies and procedures as required under this chapter, including client rights -Planning and administration of all operational functions including managerial, personnel, fiscal and reporting requirements of the program -Developing and organizational plan, ensuring that programs and services are consistent with the organization's mission and monitoring their effectiveness. -Establishing and implementing a formal quality assurance program (details will be provided) -Selection and hiring responsibility for all staff as well as participating in the determination of staffing issues , but not limited -Ensuring the provision of timely staff orientation, education and supervision -Establishing and maintaining liaison relationships and communications with facility staff, service providers, support service providers, community resources and clients -Overseeing the development and implementation of policies and procedures in conjunction with designated staff members , for the various services provided -Ensuring admission interviews with clients and in the case the client's family, guardian or legally authorized representative, be conducted in accordance with established policies and procedures -Implementing and monitoring the quality of all services provided at the facility, including the review of program outcomes available through NJSAMS. -Ensuring maintenance of the physical plant as necessary to ensure client and staff safety and otherwise the facility compliance with all applicable building, fire and safety codes. -Establishing policies and procedures for provision of emergency services to clients, and policies and procedures for other broader-base emergency situations resulting from with internal or external incidents or natural disasters Qualifications • Previous experience as a Program Administrator in Substance disorder facility is preferred, • The required licensing/certification to perform this role, • Proficiency in Microsoft Office suite, • The ability to multitask, meet deadlines, and prioritize based on current and changing needs, • The ability to work under pressure and in a fast-paced environment, • Exceptional team building and interpersonal skills are essential for this role

Job Description NEXPERA leads the way in sulfuric acid and potassium hydroxide regeneration, offering a comprehensive range of products and services that optimize processes, minimize environmental impact, and allow our partners to focus on their core operations. With the industry’s largest facility network, we ensure unmatched reliability and drive innovation across the industrial landscape. In addition, we provide an unmatched array of sulfur-based chemicals and related services to a diverse set of industries. BENEFITS Nexpera's comprehensive benefits package includes paid time off policies, as well as health, dental and vision insurance. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. POSITION PURPOSE The Chemical Operator will monitor and operate equipment and facilities, including field equipment, ensuring quality and conformance with standard operating procedures. Additional responsibilities include always maintaining safety standards and initiating and following emergency procedures when necessary. The Operator will perform basic maintenance repair and upkeep on area equipment. Job tasks are performed in control room, lab areas, and throughout various operation areas of the site. The site operates a process safety management-covered process that produces sulfuric acid in multiple concentrations. Product is shipped in rail cars, tank trucks and portable totes. PRIMARY DUTIES / RESPONSIBILITIES (but not limited to): • Start up and shut down (normal and emergency) plant systems and components., • Operate, monitor and control plant systems; visually inspect, monitor equipment and process conditions., • Prepares equipment for maintenance work by isolating, clearing and locking out., • Reviews, follows and, if qualified, revises detailed process operating procedures, maintenance procedures and safety procedures., • Troubleshoots equipment to restore to normal operation., • Analyzes charts and logs to identify potential or actual problems., • Identifies system problems to stabilize plant to normal conditions., • Trains new operators in the area, reinforcing safety and environmental principles., • Performs loading and unloading of railcars, tank trucks and totes., • Perform laboratory analysis of products., • Clerical duties as required., • Shipping duties as required., • Operate mobile equipment including manlifts, fork trucks, yard-dog and trackmobile., • Participate/Lead various site teams., • Recognize abnormalities in a High Hazard work area and promptly initiate action to secure the safety of all personnel along with protection of the environment and local community. Qualifications In order to be qualified for this role, the following is required: • High School Diploma/GED equivalent, • Minimum of 2 years’ experience in an industrial or manufacturing environment, • Ability to navigate the tools of Microsoft Office Suite (Outlook, Word, Excel, etc.) and Google Suite (Sheets, Docs, etc.) and learn new computer systems and software applications, • Willing and able to work 12-hour rotating shifts, including overtime, nights, weekends, holidays and short notice call-in if required, • Willing and able to lift up to 50 lbs, • Willing and able to work in a High Hazard environment; outdoors, indoors, elevated heights and confined spaces, • Willing and able to wear required PPE (personal protective equipment) such as steel toe shoes, hardhat, protective eyewear, face shields, respirator, chemical acid suit, etc., • Willing and able to climb stairs, ladders; stand, walk, stoop, bend, kneel, crawl; visual acuity for close work; able to reach overhead; able to hear and respond to alarms, • Willing and able to acquire a boiler’s license, • Current and valid driver’s license – willing and able to obtain powered industrial truck (i.e., fork trucks and manlifts) certification, • Willing and able to operate a trackmobile to move railcars on-site and a yard-dog to move product trailers as needed on the site., • High Hazard/Chemical operations experience, • Experience reading and interpreting Schematics, Pipe & Instrumentation Diagrams, Procedures, Manufactures’ Literature, Safety Requirements, General Instructions; ability to learn and detect process deviations, • Experience operating fork trucks, • Experience with SAP or equivalent Manufacturing Operations software Successful candidates must be able to perform the essential functions of the job with or without accommodation. Additional information We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.

Job Description Electrical and Instrumentation Technician installs, services, troubleshoots and performs preventive and predictive maintenance functions on plant equipment. This equipment includes but is not limited to; plant lighting equipment, electrical circuits, motors, starters, motor control centers, programmable controllers, control panels, transformers, switches, transmitters, automatic valves, regulators, guide systems, distributed control systems, PLC's, overhead cranes etc. May perform additional duties as assigned. Minimum Requirements: Must have a high school diploma or general equivalency diploma (GED). Must have basic math skills. Must be mechanically inclined and a minimum of 2 years of electrical / instrumentation training and/or experience. Essential Job Functions: • Able to troubleshoot, repair and wire 120 volt and (3) phase 460 volt circuits and electrical equipment., • Basic understanding of Electricity and Instrumentation., • Able to troubleshoot, repair and install distribution systems up to 460 volts., • Able to troubleshoot, repair and install controls: coils contactors, relays, brakes etc. LANGUAGE SKILLS: Able to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. MATHEMATICAL SKILLS: Able to read a tape measure with speed and accuracy. Able to calculate figures and amounts such as percentages, measurement, volume and rate. Able to apply concepts of high school math. REASONING ABILITY: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or graphic form. Ability to deal with problems involving several concrete variables in standardized situations. Leading root cause analysis and problem solving teams. Analytical and field troubleshooting skills. TECHNICAL SKILLS: Working knowledge of mechanical and electrical machinery, including conveyer systems, breakers, boilers, hydraulic and pneumatic systems, etc. Knowledge of computer systems and the ability to learn new complex applications. CERTIFICATES, LICENSES, REGISTRATIONS: May be required to maintain a current Lift Truck Operator License and/or other appropriate certification to work in certain areas or on certain equipment. PHYSICAL DEMANDS: While performing the duties of this job, the employee is regularly required to stand, walk, and talk or hear. The employee frequently is required to use hands to finger, handle, or feel; reach with hands and arms; and stoop, kneel, crouch, or crawl. The employee is occasionally required to sit. The employee must regularly lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT: While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is frequently exposed to wet and/or humid conditions. The employee is occasionally exposed to high, precarious places; fumes or airborne particles; and vibration. The noise level in the work environment is usually loud. • Able to install transformers up to 460 volt, • Able to interpret wiring drawings / diagrams., • Able to wire motors single phase, 3 phase 460 volt and 3 phase 4160 volt as per NEC / OSHA codes and Pratt standard operating procedures., • Able to use and interpret a Megohm meter., • Able to use and interpret a multimeter; volts, amps and ohms, • Able to troubleshoot and install switches; proximity, speed, limit, pressure etc., • Able to run and bend conduit and pull wire., • Able to troubleshoot control valves and transmitters., • General knowledge of electrical and pneumatic systems in mill., • Understanding of pneumatic controls including controllers, actuators, positioners and valves.

Job DescriptionBenefits: • Dental insurance, • Health insurance Must have: Blue seal refrigeration toxic 2-x license and black seal Job Description Maintains the following equipment: Ammonia refrigeration system, Freon packaged refrigeration units and building heating and air conditioning equipment, high pressure steam boiler systems, hot water generator, compressed air systems, electrical distribution equipment, building sprinkler systems, and any other supporting equipment as directed by management. Performs duties as assigned by the Facility Manager and/or Gold Seal Ensures continuous operation of all the facility utility systems and peripheral equipment to support the requirements of the production schedule and facility conditions. This requires proper coordination of all operations and maintenance utilities equipment. Coordinates both internal and external resources for maintenance of the facility. Assists in the record-keeping and training requirements for all components of the Process Safety Management/Risk (PSM/RMP management plans to achieve compliance with state and federal guidelines. Performs preventative maintenance on equipment to maintain in good working condition. Utilizes drawings, technical records, and vendor diagrams to complete Preventative Maintenance documents (PMs) related to machine overhauls and repairs. Performs other duties as assigned. WHAT'S ON THE MENU Provides technical analysis and services to provide real-time data on the status of refrigeration and operational equipment. Takes a leadership role on the emergency response team in the event of release of hazardous chemicals. Assures the ammonia compressors are operating safely and efficiently to reduce energy consumption. NECESSARY INGREDIENTS High school diploma or GED required. Knowledge of equipment set-up, functions, operating procedures, and preventative maintenance techniques. Basic knowledge in programmable logic controllers (PLCs) preferred. Demonstrated knowledge and application of best practices in maintenance and safety management. Knowledge of state and federal regulatory requirements as related to plant and utilities systems operations, safety, and environmental agencies. Knowledge of best available energy management practices and procedures. Ability to read and interpret work orders, operating manuals, and maintenance instructions in English. Ability to complete forms detailing maintenance work performed. Requires

Job DescriptionCompany Description DCS is a family owned and operated business with treating all employees like family at the core of our values. Our employees provide innovative, safe, and high-quality infrastructure/maintenance contracting services to State DOTs, railroads, and other commercial/residential customers across the entire United States. Employees receive generous compensation packages, employee engagement events & career development programs, just to name a few of the perks of being part of the DCS family! To provide quality service, we need top-of-the-line employees. That is why we offer great compensation, awesome benefits, and a work environment worth bragging about! Job Description DeAngelo Contracting Services (DCS) is looking for a motivated and skilled Hi-Rail Technician with a positive attitude, strong ethics, mechanical expertise, and a strong focus on safety. This position involves spraying herbicide across various railroads and managing the maintenance and operation of trucks and equipment. Major Duties and Responsibilities: • Supervise and manage all jobs/contracts assigned., • Apply herbicides for weed, grass, and brush control across different railroad locations., • Handle daily routing and scheduling tasks., • Perform daily tank mixing of chemicals., • Conduct truck inspections and manage the maintenance and repairs of the truck and spray system., • Calibrate all spray equipment., • Ensure all work is carried out in adherence to strict safety protocols., • Maintain daily and weekly records., • Serve as the primary point of contact with customers., • Address customer and public complaints professionally., • Report any potential liabilities immediately., • Possess a thorough understanding of various weed, grass, and brush species., • Have in-depth knowledge of the chemicals used, including what they control and their safety requirements., • Fully understand application methods, equipment, calibration, and spray patterns.Qualifications EDUCATION: • Must be 21+ years of age., • A valid state drivers license with at least 5 years of clean driving history., • Commercial drivers license preferred., • Willingness to travel away from home for up to 4-6 weeks at a time (hotel expenses covered by DCS)., • Must pass a pre-employment drug test, DOT physical, and background check to work on railroad property., • Commercial Pesticide Applicator License is preferred., • Standard work schedule is Monday through Friday, 7 AM to 4 PM, with shifts typically ranging from 10 to 12 hours., • Some weekend or night work may be required., • Occasional travel to offices during breaks for truck/equipment maintenance., • Work hours may vary based on weather conditions and workload., • Spraying is a seasonal task, aligned with the regional office schedule., • Identifying various weeds, grass, and brush species., • Understanding which chemicals control specific plant species., • Safely operating application equipment., • Learning different field application methods., • Understanding how to properly maintain equipment. Additional Information Benefit Highlights: • Challenging and rewarding work environment, • Competitive Compensation, • Excellent Medical, Dental, Vision and Prescription Drug Plan, • 401(K), • Generous Paid Time Off, • Career Development, • Increase in pay if prior experience in Hi-Rail/Vegetation Spray Industry. Come be a part of the DeAngelo family, today! DCS is an equal opportunity employer and complies with all hiring and employment regulations. In the event an ADA accommodation is needed, DCS is happy to help all employees achieve gainful employment in an atmosphere where they are appreciated and respected. DCS offers subcontracting services to government agencies as such, candidates may be subject to pre-employment screenings such as criminal background checks, pre-employment, post-accident & reasonable impairment drug screenings, motor vehicle record checks, etc. as such, DCS complies with all federal and state regulatory guidelines including the FCRA.

Job Description Pay: $50,000.00 - $70,000.00 per year Job Description: Our candidate of choice will oversee all daily operations of the plant from production and manufacturing to ensuring policies and procedures are followed. You will develop processes that will maximize stewardship, safety, quality and productivity while driving continuous improvement and optimization of all processes. This will be a second shift position KEY RESPONSIBILITIES: • Plan, organize, direct and run optimum day-to-day operations to exceed our customers’ expectations, • Increase production, assets capacity and flexibility while minimizing unnecessary costs and maintaining current quality standards, • Be responsible for production output, product quality and on-time shipping, • Allocate resources effectively and fully utilize assets to produce optimal results, • Implement strategies in alignment with strategic initiatives and provide a clear sense of direction and focus, • Monitor operations and trigger corrective actions, • Collect and analyze data to find places of waste or overtime, • Commit to plant safety procedures, • Develop systems and processes that track and optimize productivity and standards, metrics and performance targets to ensure effective return on assets, • Become an agent for culture change, • Stay up to date with latest production management best practices and concepts, • Bilingual Spanish is a very strong plus, • Hi speed packaging equipment experience preferably with high-speed filling types of equipment relative to frozen foods., • Excellent all-around plant facilities knowledge including HVAC, refrigeration sanitation and all of FDA and USDA GMP rules and regulations., • Prior experience working in a food, pharmaceutical, cosmetic, or related hi speed type of manufacturing company, • Minimum of at least 5+ years’ experience in Plant Management in a manufacturing facility as above described is highly preferred, • Ability to work at a high pace and hit the ground running when necessary, • The ability to communicate in Spanish is a strong plus Job Type: Full-time Pay: Up to $70,000 per year Job Type: Full-time Benefits: • 401(k) matching, • Dental insurance, • Health insurance, • Paid time off Experience: • food manufacturing: 5 years (Preferred) Language: • Spanish (Preferred) Ability to Commute: • Union, NJ 07083 (Required) Ability to Relocate: • Union, NJ 07083: Relocate before starting work (Required) Work Location: In person Company DescriptionWe are Deep Foods. If you shop at Indian grocery stores, you know us as your trusted megabrand with 800 SKUS sold in the channel. If you live in NYC, you may have been to our Deep Indian Kitchen® chain of fast-casual restaurants. Otherwise, you probably haven’t seen or heard of us much yet, but we’re on a mission to change that starting with our early stage Deep Indian Kitchen® frozen brand sold in more than 11,000 mainstream natural, conventional, and e-commerce stores. You see, since 1977, we have been devoted to one simple purpose: to share all of India through our always made-from-scratch, authentically crafted food. As a family-owned-and-operated company, we also believe our food should not only taste good but also do good. That’s why every purchase of our products benefits the Deepkiran Foundation which helps provide access to education for underprivileged children in rural India. To date, we’ve supported more than 22,000 children across hundreds of villages!We are Deep Foods. If you shop at Indian grocery stores, you know us as your trusted megabrand with 800 SKUS sold in the channel. If you live in NYC, you may have been to our Deep Indian Kitchen® chain of fast-casual restaurants. Otherwise, you probably haven’t seen or heard of us much yet, but we’re on a mission to change that starting with our early stage Deep Indian Kitchen® frozen brand sold in more than 11,000 mainstream natural, conventional, and e-commerce stores.\r\n\r\nYou see, since 1977, we have been devoted to one simple purpose: to share all of India through our always made-from-scratch, authentically crafted food. As a family-owned-and-operated company, we also believe our food should not only taste good but also do good. That’s why every purchase of our products benefits the Deepkiran Foundation which helps provide access to education for underprivileged children in rural India. To date, we’ve supported more than 22,000 children across hundreds of villages!

Job Description • We are hiring immediately for a full time MAINTENANCE ELECTRICIAN position., • Location: L'Oreal - 30 Terminal Avenue, Clark, New Jersey 07066. Note: online applications accepted only., • Schedule: Full time; Monday through Friday, hours may vary. Occasional Saturdays required. More details upon interview., • Requirement: Certified Electrician with high voltage experience and familiarity with CMMS is required., • Pay Range: $30.00 per hour to $43.00 per hour. ESFM is the corporate Integrated Facilities Management (IFM) division of Compass Group USA and a Keystone member of the International WELL Building Institute (IWBI). We Make Applying Easy! Want to apply to this job via text messaging? Text JOB to 75000 and search requisition ID number 1470767. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: Rooted in hospitality, ESFM elevates the workplace experience as the single source of innovative FM solutions that ensure a safe, healthy, and sustainable environment. ESFM’s clients include many household names from Life Science, Technology, Oil & Gas and Manufacturing markets. ESFM self-performs 80% of all IFM solutions provided to clients. Their portfolio of service categories includes Environment, Health & Safety, Facilities Maintenance & Engineering, Sustainability, Janitorial & Industrial Cleaning, Laboratory Support and Workplace solutions. This self-performance model creates a consistent hospitality experience for clients, resulting in higher engagement and productivity from their employees. In 2020, ESFM (formerly Eurest Services) won the George Graves Award for Facility Management Achievement from the International Facilities Management Association (IFMA). Job Summary Summary: Operates and maintains all equipment, guided by a general knowledge of building trades, carpentry, painting, minor electrical, plumbing, mechanical system repairs, plant maintenance and the use of tools and basic maintenance supplies. Essential Duties and Responsibilities: • Provides quality customer service by providing one-on-one attention to detail., • Responds to dispatch calls for machine repairs using company vehicle., • Calls on existing customers to determine adequacy of service; listens to and resolves service complaints., • Inspects and listens to machines to identify causes of malfunctions; dismantles machines to gain access to problem area., • Performs a variety of duties in maintaining, repairing, operating and renovating plant and facilities., • Inspects parts to detect wear, misalignment or other problems; removes and replaces worn or defective parts; repairs broken parts; realigns and adjusts components; tests machine operation following repair., • Reads blueprints and diagrams, determines materials needed, estimates time and material costs on installations and requests supplies to assure timely and adequate availability., • Installs, tests and repairs electrical fixtures, power distribution circuits, utility equipment, internal communication and alarm systems and elements of heating and medical equipment., • Diagnoses and corrects trouble on electrical installations; recommends emergency courses of action to keep vital electrical equipment operational., • Recommends appropriate sources of electrical power for new installations or renovation projects., • Works on power lines, including 120 to 480 volts and on transformers, switch gears, cubicles, etc., • Performs corrective maintenance in accordance with the work order system., • Installs/repairs high and low-voltage electrical equipment including transformers, panels, feeders, motors, switches, fire alarms, intercoms, computers and other equipment in a timely manner., • Maintains clean and safe work environment; performs job safely., • Exhibits professionalism with customers, fellow employees and others., • Performs other duties as assigned. Qualifications: • Valid Non-CDL Class C driver's license., • Valid current state/local electrical license., • Two years of trade school or related experience., • Two years of experience as an electrician in a similar-sized institution in an engineering or maintenance occupation., • Working knowledge of local, state and the National Electric Code (NEC). Associates at ESFM are offered many fantastic benefits. Full-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here for paid time off benefits information. About Compass Group: Achieving leadership in the foodservice and facility management industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. ESFM maintains a drug-free workplace. ESFM

Job DescriptionSalary: $75,000$85,000 Assistant Plant Manager Linden, NJ Full-time, Onsite (First Shift) $75,000$85,000 base salary + performance bonus Typically 5:30 AM3:30 PM, with occasional weekend coverage (SunThurs or TuesSat rotation) About the Opportunity An established industrial production facility specializing in high-volume textile and uniform services is seeking a hands-onAssistant Plant Managerto join its leadership team. This role supports a 100+ year-old, fast-growing organization recognized for innovation, quality, and operational excellence. The ideal candidate will be a driven, organized leader with a proven background in plant operations and team development within a high-throughput production or service environment. Key Responsibilities • Oversee daily production activities, ensuring output, quality, and customer delivery standards are consistently met., • Supervise multiple Production Supervisors and department leads across shifts to maintain workflow efficiency and accountability., • Monitor and report on production metrics, performance, and any operational issues impacting output or service., • Lead workforce planning, including hiring, scheduling, training, and performance management for production teams., • Coach and mentor supervisors and team members to build internal talent and prepare staff for promotion opportunities., • Maintain compliance with safety regulations (OSHA, labor laws, and company policies), ensuring a clean and safe work environment., • Collaborate cross-functionally with maintenance, logistics, and customer service teams to resolve operational challenges quickly., • Manage labor costs and production budgets, identifying opportunities to improve efficiency and reduce waste., • Maintain strong communication with internal teams and external clients to uphold service quality and resolve any escalated issues., • Drive a culture of continuous improvement through proactive problem-solving, workflow optimization, and data-driven decision-making. Requirements • Minimum 5 years of supervisory or 1+ year of managerial experience in a high-volume plant or production environment., • At least 2 years of customer service or client-facing experience handling service-related demands., • Proven understanding of production workflow, scheduling, and team coordination., • Proficiency with Microsoft Office (Word, Excel, Outlook) and general computer literacy for reporting and communication., • Strong leadership and communication skills with the ability to motivate teams in a fast-paced environment., • Familiarity with safety compliance, OSHA standards, and workplace regulations., • Bilingual (English/Spanish) preferred.

Job Description About Us: NEXPERA leads the way in sulfuric acid and potassium hydroxide regeneration, offering a comprehensive range of products and services that optimize processes, minimize environmental impact, and allow our partners to focus on their core operations. With the industry’s largest facility network, we ensure unmatched reliability and drive innovation across the industrial landscape. In addition, we provide an unmatched array of sulfur-based chemicals and related services to a diverse set of industries. Position Purpose The Plant Manager provides leadership and guidance for the safe operation of the Sulfuric Acid Plant. There are up to 50 employees at each site and up to 25 resident contractors depending on the size and complexity of the site. There are differences between the products, inputs and markets between the plants. Primary Duties/Responsibilities (but not limited to): • Ensures that assigned plant operations demonstrate world-class performance, • Provides strategic leadership, management, and technical expertise to the organization., • Drives initiatives to foster a best-in-class safety culture., • Manages financial aspects of operations and understands the effect on financial performance., • Provides Process Safety Management leadership in a High Hazard Process environment, • Establish, sustain, and improve standard operating systems, • Champion operational discipline, • Foster an environment with open communication and feedback, • Drive high production capability though utilization of improvement programs and maintenance best practices, • Implement HR initiatives at the site, • Champion the High Performance Work Teams, • Represent the plant at public/industry groups (Community Advisory Panels, Manufacturing Associations), • Manage area personnel – provide mentoring and guidance for direct reports, and oversee training and development systems, • Work with the site employees to manage day-to-day operations, • Interface with the Supply Chain for coordination of production and shipping schedules, • Effectively communicate and interface with the Refinery/Customer when required, • Effectively utilize leveraged resources as required, • Accountable for total site cost and capital expenditures, • Accountable for being compliant with all corporate systems and processes, • Promote and support change in response to ongoing business needs, • Other duties as assigned Qualifications: • 4 year degree in engineering or equivalent, • Previous Management experience, • Process Safety Management Experience in a High Hazard Process facility, • 10 years of manufacturing experience in a chemical, refining or pharmaceutical industry, • Strong leadership skills and experience, • Exceptional interpersonal and communication skills both written and verbal, • Ability to set priorities and provide direction to influence management and the broader organization, • Demonstrated strong teamwork, collaboration and cross-cultural skills, • Demonstrated ability to create a respectful work environment where everyone can contribute to their full potential, • Root Cause Investigation, • Incident Investigation, • Business software (SAP, Excel, PowerPoint, etc.), • Six Sigma Certification is Preferred Benefits: NEXPERA's comprehensive benefits package includes paid time off policies, as well as health, dental and vision insurance. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement.

Job DescriptionBenefits: • Dental insurance, • Health insurance Must have: Blue seal Refrigeration Toxic License/Seal & Black Seal Steam License/Seal Job Description Maintains the following equipment: Ammonia refrigeration system, Freon packaged refrigeration units and building heating and air conditioning equipment, high pressure steam boiler systems, hot water generator, compressed air systems, electrical distribution equipment, building sprinkler systems, and any other supporting equipment as directed by management. Performs duties as assigned by the Facility Manager and/or Gold Seal Ensures continuous operation of all the facility utility systems and peripheral equipment to support the requirements of the production schedule and facility conditions. This requires proper coordination of all operations and maintenance utilities equipment. Coordinates both internal and external resources for maintenance of the facility. Assists in the record-keeping and training requirements for all components of the Process Safety Management/Risk (PSM/RMP management plans to achieve compliance with state and federal guidelines. Performs preventative maintenance on equipment to maintain in good working condition. Utilizes drawings, technical records, and vendor diagrams to complete Preventative Maintenance documents (PMs) related to machine overhauls and repairs. Performs other duties as assigned. WHAT'S ON THE MENU Provides technical analysis and services to provide real-time data on the status of refrigeration and operational equipment. Takes a leadership role on the emergency response team in the event of release of hazardous chemicals. Assures the ammonia compressors are operating safely and efficiently to reduce energy consumption. NECESSARY INGREDIENTS High school diploma or GED required. Knowledge of equipment set-up, functions, operating procedures, and preventative maintenance techniques. Basic knowledge in programmable logic controllers (PLCs) preferred. Demonstrated knowledge and application of best practices in maintenance and safety management. Knowledge of state and federal regulatory requirements as related to plant and utilities systems operations, safety, and environmental agencies. Knowledge of best available energy management practices and procedures. Ability to read and interpret work orders, operating manuals, and maintenance instructions in English. Ability to complete forms detailing maintenance work performed. Requires

Job Description General Manager – Food Pasteurization Facility (Linden, NJ) Company Overview We are a specialty food processing company based in Linden, NJ, providing pasteurization services for spices, nuts, and grains using advanced steam and vacuum chamber technology. Our facility operates under strict FDA and health department regulations, and we are proud to maintain a registered FSSC 22000 food safety and quality management system to meet the highest customer and industry standards. We are a small but highly skilled team of fewer than 25 employees, where every team member plays an important role. The General Manager will oversee all aspects of daily operations and report directly to the President. Position Summary The General Manager will be responsible for the leadership, efficiency, and compliance of the facility. This includes production, quality assurance, safety, maintenance coordination, human resources, and financial performance. The ideal candidate combines a strong background in microbiology and food safety systems with proven leadership and business management experience. Key Responsibilities Operations & Production • Oversee daily pasteurization operations for spices, nuts, and grains., • Manage production scheduling and ensure efficient resource use., • Collaborate with the Maintenance Manager to ensure equipment uptime and reliability., • Lead development and execution of the FSSC 22000 quality management system, with integration of ISO 9000 principles., • Ensure compliance with FDA and health department regulations., • Oversee process validation, including microbiology, pasteurization, and sterilization science., • Manage corrective and preventive actions (CAPA) for customer complaints, product damage, and process non-conformities., • Manage budgeting, expense control, and P&L performance., • Contribute to customer pricing and cost management strategies., • Directly supervise office staff, forklift drivers, and material handlers., • Handle hiring, training, and performance management. Bachelor’s degree in Microbiology, Food Science, or related fields preferred (relevant experience considered in lieu of degree). • Minimum 5 years of experience in plant management, food processing, or related manufacturing environment., • Proven knowledge of FSSC 22000, ISO 9000, FDA, and food safety regulations., • Strong leadership skills with experience managing small to mid-sized teams., • Solid financial acumen, including budgeting and expense management., • Opportunity to lead operations in a specialized, highly regulated food safety facility., • Direct impact on company performance with close collaboration with ownership., • Small, collaborative team environment where your expertise makes a difference.