Process technician jobs in New Brunswick, New JerseyCreate job alerts

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, Connecticut, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Summary:: The Fleet Technology Technician will provide the first line of support of all onboard truck technology and related hardware. Assist with all problems via phone, email, remote support, site visits, or along the driver’s route. They are responsible for the safe and productive operation of the fleet assets through the efficient performance of the department’s daily activities. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Install the Routeware tablet, and interface all components with the systems on the vehicles, including the in-cab video cameras, Samsara Cameras, and radios., • Maintain a high degree of customer service for all support inquiries and adhere to all service management principles, • Take ownership of user problems and be proactive when dealing with user issues, • Skill to disassemble vehicle interiors without damaging the vehicle or the interior components or where to locate information if disassembly procedure is unknown or not evident, • Identify component failures quickly, and replace as necessary, • Properly choosing and running wires, cables, and harness assemblies throughout the vehicle (including into the engine compartment, trunk/hatch and doors) with a competency to execute safe and serviceable methods in observing current capacity, weather proofing, passage of wire through metal, wiring alongside existing vehicle wiring, and where wiring passes near any moving parts, • Knowledge of various commercially available installation accessories such as wiring harnesses, high current power/ground wiring, circuit protection devices, etc., • General knowledge and familiarity of the appropriate application of various fasteners for equipment mounting and those encountered during removal interior panels with regard to the original integrity of the vehicle and subsequent installation, • Install Bluetooth hands-free cellular devices or modules, or wireless audio streaming devices or modules with driver safety as a priority, and in a way that maintains standard vehicle operation and safety features. Hands-free devices should be installed in compliance with all local and Federal laws, as well as in compliance with CEA recommended practices, • Approach all encounters with employees, customers and vendors in a friendly, service-oriented manner., • Always maintain appropriate confidentiality of all verbal and/or documented information., • Other projects and tasks as assigned. III. Responsibilities • Fluency in English, Spanish is a plus, • Applicants must pass drug test, • Valid driver’s license and a clean driving record is strongly preferred, • Travel in company vehicle to all locations in New Jersey, New York State, New York City, Pennsylvania, and Ohio as needed. Overnight stay(s) could required (Rare), • Three years (3) professional experience is preferred., • Training at an installation related school or program is a plus, • Should have a strong knowledge of PC’s, USB peripherals, Bluetooth, Serial (RS-232), Cellular Data, etc. Education and Experience: High School with 3+ years of related experience. Certificates, Licenses, Registrations or Other Requirements: None required. Other Knowledge, Skills or Abilities Required • Self-Starter with strong communication skills. Listed below are key points regarding environmental demands and work environment of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. • Required to use motor coordination with finger dexterity (such as keyboarding, machine operation, etc) most of the work day;, • Required to exert physical effort in handling objects less than 30 pounds rarely;, • Required to be exposed to physical occupational risks (such as cuts, burns, exposure to toxic chemicals, etc) occasionally;, • Required to be exposed to physical environment which involves dirt, odors, noise, weather extremes or similar elements often; Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Salary Range Minimum: USD $25.00/Hr.

Nomad Health seeks an experienced Computed Tomography radiology tech for a travel assignment in NJ. Take the next step in your healthcare career and join Nomad Health as a travel radiologic technologist. As a traveler with Nomad, you get access to industry-leading pay, outstanding benefits, and our knowledgeable Nomad Navigator support team. • At least one year of total experience as a radiology tech (some jobs may require more experience), • An active individual state license and/or certification to practice as a rad tech, • An active credential issued by ARRT, • Register for a Nomad Health account to view full job details and apply, • Major medical and dental plans available on your first day of work, • 401(k) with employer matching available, • Reimbursement for travel to your assignment, • Housing stipend To apply for a travel radiology technologist or x-ray technician job with Nomad Health, you must have an active ARRT certification, evidence of at least one year of Computed Tomography experience as a rad tech, and evidence of at least one year of experience within your speciality/modality within the last three years. You must have also graduated from an accredited school within your discipline, and score at least 80% on all Nomad competency assessments. We have a number of jobs to support different types of ARRT-issued certifications, including nuclear med techs, radiation therapists, and more. At Nomad, we want to give you the tools you need to succeed. Our Nomad Navigators are passionate about helping you get to the bedside as quickly and efficiently as possible. They can help you with your application, credentialing, and finding housing. Our Navigators have experience working with travel rad techs and can even help with on-the-job concerns if any arise while on assignment. In addition to real hands-on support, we have a benefits package that was explicitly built for traveling clinicians and includes a housing stipend, partial travel reimbursement, and major medical and dental plans available on your first day of work. We also have a 401(k) program with employer matching options, a user-friendly digital timekeeping process, and weekly direct deposits. With your Nomad Health account, you get access to our unique digital platform; a platform built to help you land your perfect assignment. Move your travel healthcare career forward and find your next job today. We are seeking experienced rad techs in a number of specialties to fill critical roles across the country: • Cath Lab Tech, • MRI, • CT Scan, • DEXA Scan, • Interventional Radiology, • Fluoroscopy

Trustaff Allied is seeking a travel CT Technologist for a travel job in Edison, New Jersey. Job Description & Requirements • Specialty: CT Technologist, • Discipline: Allied Health Professional, • Start Date: 09/15/2025, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours Trustaff Allied Job ID #905001. Pay package is based on 8 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: CT Technician About Trustaff Allied Our traveler-first attitude has set us apart from other travel healthcare agencies When you join the Trustaff family, you’re more than just a body filling a role—you're a vibrant individual with dreams and aspirations. As one of the nation's leading travel healthcare companies, your recruiter will work with you one-on-one to guide your career and help you achieve your goals. • You decide when and where you want to work, • Enjoy industry-leading pay, benefits, and bonuses, • Experience new people and places, • Grow your clinical skills and expand your experience Travel healthcare lets you take your professional career to the next level while maintaining your flexibility and freedom. At Trustaff, we put you first, so you never have to compromise your work or pay. We are proud to have one of the highest nurse retention rates in the country. Some of the other reasons people choose us include: • Priority access to thousands of travel healthcare jobs, • Industry-leading pay, • Guaranteed weekly hours, • Experienced recruiters, • Comprehensive benefits, including medical, dental, and vision, • 401k with employer match, • Assistance with travel, compliance, and housing, • Great bonuses for completions, referring friends, and more Benefits • Dental benefits, • Medical benefits, • Vision benefits, • Guaranteed Hours

Job Description A Japanese food manufacturing is looking for a QC technician in Somerset, NJ. Title: Food QC Specialist Location: Somerset, NJ Salary: 19-25/hr Hours: Monday to Friday from 9pm to 6am (Starting from Sunday 9pm) Type: Direct-hire, full-time will an excellent benefit package Responsibility: Testing of raw materials, work-in process and finished products. Conducting environmental testing for cleaning and sanitary verifications. Conducting internal inspections (GMP walk through, record checking, etc.) Following strict regulatory and internal guidelines. Serving as an active member of Food Safety Management Team. Documenting, reviewing documentation, and creating quality-related report Performing verification and validation of production processes and equipment. Collaborating with other employees to address and solve the quality issues promptly. Performing other functions as trained and requested by QC manager and Supervisor. Skills and Qualifications: Teamwork and collaboration. B.Sc. Degree in Food Science or other related field Minimum of 3 year working experience in food industry General knowledge of Food Safety, cGMP, and HACCP Knowledge and experience of SQF, FDA regulations, and FSMA/PCHF are plus Fundamental computer skills (e-mail, Excel, Word, PowerPoint.) Self-disciplined and Self-motivated English, Spanish (Preferred but not required) Ability to lift-up to 40lbs. Ability to work in various work conditions (hot, humid, cold, wet). Working hour: 09:00 PM11PM during probation for training OT Required Company DescriptionWe are a Talent Acquisition/People Operation (HR) group that connects people to careers and professional growth. Would you like to look for a new job opening to expand your career path or a new applicant for your opening position? Then you are in the right place to start! TOP Group has grown from a single office in New York in 1992, to one of the global leaders in Japanese-related talent solutions today. As one of the first Japanese staffing agencies in the U.S., we started our focus in Finance but quickly expanded to other industries such as Technology, Freight Forwarding, Trading, and Manufacturing. We have offices in New York - Head Quarters, San Francisco, Los Angeles, and Houston. We have been expanding to Mexico to assist the Japanese corporations and become the #1 Japanese Recruiting Agency in Central America. Our Industries include: ●\tIT/Innovation ●\tManufacturing ●\tTrading ●\tLogistics ●\tEngineering ●\tOil & Gas ●\tCPA/Accounting ●\tFinance/Bank ●\tEntertainment If you are open to new job opportunities or interested in developing your career path, please follow our page, and let’s connect! You are more than welcome to InMail recruiters below. Unsure of which office to connect to? No worries! We will direct you to the nearest office for your desired location. For more information, please visit our website. are a Talent Acquisition/People Operation (HR) group that connects people to careers and professional growth. Would you like to look for a new job opening to expand your career path or a new applicant for your opening position? Then you are in the right place to start!\r\n\r\nTOP Group has grown from a single office in New York in 1992, to one of the global leaders in Japanese-related talent solutions today. \r\n\r\nAs one of the first Japanese staffing agencies in the U.S., we started our focus in Finance but quickly expanded to other industries such as Technology, Freight Forwarding, Trading, and Manufacturing. \r\n\r\nWe have offices in New York - Head Quarters, San Francisco, Los Angeles, and Houston. \r\n\r\nWe have been expanding to Mexico to assist the Japanese corporations and become the #1 Japanese Recruiting Agency in Central America.\r\n\r\nOur Industries include:\r\n●\tIT/Innovation\r\n●\tManufacturing\r\n●\tTrading \r\n●\tLogistics\r\n●\tEngineering \r\n●\tOil & Gas\r\n●\tCPA/Accounting \r\n●\tFinance/Bank\r\n●\tEntertainment\r\n\r\nIf you are open to new job opportunities or interested in developing your career path, please follow our page, and let’s connect! You are more than welcome to InMail recruiters below. Unsure of which office to connect to? No worries! We will direct you to the nearest office for your desired location.\r\n\r\nFor more information, please visit our website.

Job Description About the Role: The Mohs Technician plays a crucial role in the health care services industry by assisting dermatologists in the Mohs micrographic surgery process, which is a specialized technique for treating skin cancer. This position requires a high level of precision and attention to detail, as the technician will prepare and process tissue samples for examination. The ultimate goal is to ensure that all cancerous cells are removed while preserving as much healthy tissue as possible, leading to optimal patient outcomes. The technician will also be responsible for maintaining a sterile environment and adhering to safety protocols to protect both patients and staff. By effectively supporting the surgical team, the Mohs Technician contributes significantly to the overall success of skin cancer treatments and patient satisfaction. Minimum Qualifications: • High school diploma or equivalent., • Completion of a Mohs technician training program or equivalent experience., • Experience working in a dermatology or surgical setting., • Certification as a Mohs technician from a recognized professional organization., • Prepare and process tissue specimens for Mohs surgery, ensuring accurate and timely results., • Assist the surgeon during the procedure by providing necessary instruments and maintaining a sterile field., • Perform quality control checks on equipment and materials to ensure compliance with health and safety standards., • Document and maintain accurate records of procedures, patient information, and specimen handling. The required skills for a Mohs Technician include strong attention to detail and the ability to work under pressure, as the technician must ensure that tissue samples are processed accurately and efficiently. Excellent communication skills are essential for interacting with patients and the surgical team, providing clear information and support. Technical skills in operating laboratory equipment and performing quality control checks are vital for maintaining a safe and sterile environment. Preferred skills, such as knowledge of histology, enhance the technician's ability to understand and interpret tissue samples, contributing to better patient outcomes. Overall, a combination of technical proficiency and interpersonal skills is crucial for success in this role. About Skin and Aesthetics: Skin and Aesthetic Centers is a comprehensive management care organization. Through collaborative partnerships with select Dermatology, Plastic Surgery, and Vein physician groups, we leverage economies of scale, shared resources, and tenured business leadership to drive exponential value. Our affiliated practices operate in some of the top markets in the country, including NYC, Chicago, Minneapolis, and multiple locations in NJ and PA, with our footprint rapidly growing. Become part of an innovative, growing team dedicated to elevating healthcare! Benefits of Joining Skin & Aesthetic Centers: • Competitive compensation with a sign-on bonus and 18 days of paid PTO., • Comprehensive medical plan offerings with 80% contribution towards premiums., • Employer monthly contribution to HSA (for eligible plan options)., • Extensive ancillary benefits: dental, vision, voluntary life insurance, hospital indemnity, critical illness, EAP, legal assistance, and more!, • Company-paid life insurance, short- and long-term disability., • 401k

About USS: United Site Services is the industry leader in comprehensive site services, committed to creating partnerships that help enable our customers’ project and event success. Our deep industry expertise, excellence in process management, and dedication to corporate responsibility are pillars of our value proposition; each supported by tangible, best-practice programs. Our success is fueled by the dedication and collaboration of our diverse team, which includes field technicians, customer care representatives, sales professionals, and functional experts. Each member of our team plays a vital role in ensuring a seamless and reliable experience for our customers. By joining United Site Services, you will be part of an organization that values continuous improvement, teamwork, and excellence in every aspect of our business. Overview: The Service Technician operates a company service truck and drives to various locations to service/pump/clean portable restrooms and/or holding tanks. This position is the heart of our business. Responsibilities: • Perform basic service truck driving functions in accordance with USS and DOT requirements., • Perform all work duties in a safe manner in accordance with USS and DOT safety standards to ensure no accidents or injuries., • Perform duties by sitting, standing, stooping, kneeling, crouching or crawling. In addition, perform lifting/pushing between 50 and 150 lbs. on a frequent basis during work shift., • Conduct portable toilets servicing to USS 8 point service standard., • Perform customer service interaction when on customer work sites to ensure they are getting the services completed to their standard., • Ability to be flexible in order to meet customer needs when routes needs to be adjusted or changed., • Provide routing feedback to Operations Manager/Supervisor/Coordinator to be most efficient as well as giving the customer the best service possible., • Ability to strategically plan for customer needs by discussing their portable toilet needs, so the customer's current and future needs are satisfied. Qualifications:, • Minimum two years of commercial driving experience., • Valid Driver License (CDL or non-commercial)., • Excellent time management, customer service and communication skills., • Strong problem-solving and decision making skills. Physical Requirements:, • Sit while driving and stand while servicing products, • Use hands and fingers to handle, control or feel objects tools or controls, • Repeat the same movements, • See details of objects that are less than a few feet away and also at greater distance, • Speak clearly so customers can understand, • Understand the speech of another person, • Hear sounds and recognize the difference between them, • Walk up to 30 minutes at a time without exertion, • Enter and exit equipment by stepping and kneeling, • Lift up to 40lbs from your waist to your shoulders, • Lift 30lbs from the floor to your head, • Crouch and squat, • Holiday & Paid Time Off (pro-rated for Part-Time employees), • Medical/Pharmacy, • Dental, • Vision, • Employer-Paid Short-Term Disability, • Employer-Paid Employee Basic Life & Accidental Death and Dismemberment, • Voluntary Employee Life & Accidental Death and Dismemberment, • Voluntary Spousal Life, • Voluntary Dependent Life, • Hospital Indemnity, Accident and Critical Illness, • Commuter/Transit Account, • Healthcare Flexible Spending Account, • Dependent Care Flexible Spending Account, • Health Savings Account, • 401(k) with employer match, • Employer-Paid Employee Assistance Program (EAP)

About USS: United Site Services is the industry leader in comprehensive site services, committed to creating partnerships that help enable our customers’ project and event success. Our deep industry expertise, excellence in process management, and dedication to corporate responsibility are pillars of our value proposition; each supported by tangible, best-practice programs. Our success is fueled by the dedication and collaboration of our diverse team, which includes field technicians, customer care representatives, sales professionals, and functional experts. Each member of our team plays a vital role in ensuring a seamless and reliable experience for our customers. By joining United Site Services, you will be part of an organization that values continuous improvement, teamwork, and excellence in every aspect of our business. Overview: The Special Events Service Technician is responsible for operating a company service truck and driving to various locations at an event to service/pump/clean portable restrooms or holding tanks. This position also performs basic pick-up and delivery of units and the installation and removal of temporary fences at special events. Workdays are Thursday - Monday. The Special Events Service Technician must be willing to travel to support special events throughout the region and to support other regions as needed. Responsibilities: • Conduct daily pre-shift vehicle inspection & report deficiencies to management immediately. Conduct daily inspection of all tools assigned to the truck to ensure safety and proper working condition. Check loads to ensure that truck has all material (units, fence panels, poles, etc.) and tools needed to complete service tickets, • Operate service trucks to and from pre-designated work sites based on assignment information. Maintain a clean and fully stocked truck, • Operate flatbed trucks to and from pre-designated work sites based on daily routing information to deliver or pick up portable restroom units, hand sinks, holding tanks, or containers. Update system and tickets with relevant delivery or pick-up detail, • Operate fence trucks to and from pre-designated work sites based on daily routing information to deliver or pick up the fence (chain link, panel, materials, etc.). Also, act as a point of contact on fence jobs where a crew is assigned to the job/truck and will operate fence installation equipment, • Operate tanker/transfer truck to and from the local dump and completes required paperwork as necessary, • Service portable restrooms, holding tanks, septic tanks, sinks, showers, etc., at various work sites by following the Company's servicing guidelines. Notifies management of any issues encountered on route assigned, • Unload all fence materials and install fence panels, with appropriate tools, at the work site in accordance with pre-determined specifications. Locate, measure, and mark the location for placement of panels & installation, • Troubleshoot and address all basic repair and maintenance as needed on-site so as to not disrupt the customer experience. Report all special maintenance requests and/or equipment replacements in FSL, • Perform pick-up and delivery of United Site Services (USS) units at customer locations in a timely manner in accordance with customer needs, • Strategically plan for customer needs by discussing their pickup and delivery needs, so the customer's current and future needs are satisfied, • Work with dispatch to keep updated on service schedule changes throughout the day and adapt to changes as needed, • Conduct all work duties in a safe manner in accordance with USS and DOT safety standards to ensure no accidents or injuries, • Interact with customers on-site to ensure they are getting the services completed to their standard, • Work with Operations Manager/Supervisor/Coordinator by providing customer feedback as it relates to service needs and expectations, • Meet with site superintendent (or other designated representative) to confirm work order, • Maintain telephone or radio contact with supervisor to receive additional instructions, changes to work locations, etc, • Maintain truck log according to state and federal regulations, • Perform other duties as assigned Qualifications:, • Minimum two years of commercial driving experience., • Valid Commercial Driver's license (Class CDL A or B with endorsement or Class C, D, or E (depending on state)., • Excellent time management, customer service and communication skills., • Strong problem-solving and decision-making skills., • Ability to meet deadlines. Physical Requirements:, • Sit while driving and stand while servicing products, • Use hands and fingers to handle, control or feel objects tools or controls, • Repeat the same movements, • See details of objects that are less than a few feet away and also at greater distance, • Speak clearly so customers can understand, • Understand the speech of another person, • Hear sounds and recognize the difference between them, • Walk up to 30 minutes at a time without exertion, • Enter and exit equipment by stepping and kneeling, • Lift up to 40lbs from your waist to your shoulders, • Lift 30lbs from the floor to your head, • Crouch and squat, • Holiday & Paid Time Off (pro-rated for Part-Time employees), • Medical/Pharmacy, • Dental, • Vision, • Employer-Paid Short-Term Disability, • Employer-Paid Employee Basic Life & Accidental Death and Dismemberment, • Voluntary Employee Life & Accidental Death and Dismemberment, • Voluntary Spousal Life, • Voluntary Dependent Life, • Hospital Indemnity, Accident and Critical Illness, • Commuter/Transit Account, • Healthcare Flexible Spending Account, • Dependent Care Flexible Spending Account, • Health Savings Account, • 401(k) with employer match, • Employer-Paid Employee Assistance Program (EAP), • Employee Discounts Salary Range: $31.93 – $46.30 / hour Pay Transparency Statement: At United Site Services, our salary ranges reflect the minimum and maximum base pay for the posted position applicable to all locations across the US. Within the posted salary range, individual pay is determined by the geographic location, job related skills, experience, education, and certifications. Our total compensation package includes base pay plus a comprehensive benefits program. EEO Statement: United Site Services is an equal opportunity employer. In accordance with applicable law, we prohibit discrimination against any applicant or employee based on any legally-recognized basis, including, but not limited to: race, color, religion, sex (including pregnancy, lactation, childbirth or related medical conditions), sexual orientation , gender identity , age (40 and over), national origin or ancestry, citizenship status, physical or mental disability, genetic information (including testing and characteristics), veteran status, uniformed servicemember status or any other status protected by federal, state or local law. Our commitment to equal opportunity employment applies to all persons involved in our operations and prohibits unlawful discrimination by any employee, including supervisors and co-workers.

Control Lab Technician – Microbiology Job Summary: The Quality Control (QC) Lab Technician –is responsible for conducting microbiological and chemical testing on raw materials, in-process products, finished goods, and packaged items. This role ensures all testing complies with SOPs, cGMP guidelines, and regulations. The technician must maintain required documentation, uphold lab safety and cleanliness standards, and communicate any quality or compliance concerns promptly to management. Key Responsibilities: • Follow all safety rules, SOPs, cGMP guidelines, and applicable federal, state, and company regulations to maintain a safe and compliant work environment., • Calibrate and maintain QC laboratory equipment., • Conduct chemical and physical testing (e.g., pH, density, color, odor, appearance, NFTIR) in accordance with Standard Testing Procedures (STPs)., • Perform microbiological analysis on various sample types and document procedures and results accurately., • Prepare clear, complete, and accurate laboratory reports and records., • Evaluate and interpret test results, identifying deviations from established standards., • Maintain cleanliness and organization of workstations and laboratory equipment., • Use appropriate personal protective equipment (PPE) and adhere to lab hygiene practices., • Communicate any quality or compliance issues to the Lab Manager or Quality team immediately., • Assist with additional laboratory tasks and projects as assigned. Qualifications: • Bachelor’s degree in Biology, Chemistry, or a related scientific field preferred., • Associate degree accepted with relevant laboratory experience., • Knowledge of Good Manufacturing Practices (GMP) and Good Laboratory Practices (GLP)., • Strong attention to detail and interpersonal communication skills., • Ability to work independently and collaboratively in a team environment., • Proficient in Microsoft Word and Excel., • Capable of following verbal and written instructions, including SOPs and directions from the Lab Manager. Benefits: Competitive Salary Medical Coverage 401k with Company Match Vacation, Personal, and Holiday Pay Contact: EOE: NutraBio is an Equal Opportunity Employer

Job Description Our Client is Seeking a Production Technician for a Direct Hire role in Warren, NJ! Monday - Friday 7AM - :30PM Pay : $26 - $32/hr Responsibilities: • First level support of the technical task fulfillment in the line, • Support the production staff and continuously develop them with targeted training and courses, • Direct interface and close collaboration with Process Engineering and R&D, • Documentation and realization of Prototypes, pre-series and launch to ensure a smooth New-product introduction, • Mentor and train assemblers on assembly techniques and processes, • Conduct routine preventive maintenance on assembly equipment, performing inspections, adjustments, and repairs as needed to maintain equipment functionality, • Perform setup and changeover of equipment to support production and quality control checks on finished products, • Assist in identifying and resolving any discrepancies caused by equipment or tooling, • Maintain meticulous records of maintenance activities and spare parts inventory levels, • Minimum 5 years of general work experience, preferably in an assembly or manufacturing environment, • Degree in technical field or equivalent professional experience, • Knowledge of pneumatics, electro-pneumatics and robotics Preferred, • Knowledge in Lean5S methodology at least Green Belt, • Proficient in reading and interpreting engineering drawings and assembly instructions Company DescriptionPrideStaff is a 16 time Best of Staffing Award Winning full-service staffing company.PrideStaff is a 16 time Best of Staffing Award Winning full-service staffing company.

Job DescriptionJob Description DUTIES AND RESPONSIBILITIES The Maintenance Facility Buildings and Grounds Technician is a skilled position in the construction, maintenance and repair of the interiors and exteriors of buildings and properties. Work is performed with minimal direct supervision. • Support manufacturing operations by responding to maintenance calls and completing facility repairs, • Troubleshoot all equipment in a timely manner – call for additional support on complex problems, • Enter all work completed in computer-based CMMS maintenance program, • Monitor and report spare parts usage including completing parts order forms, • Performs general carpentry work in the alteration, repair and maintenance of buildings including but not limited to floors, walls, roofs, stairways, partitions, doors, locks, windows, screens, fixtures, furniture, interior and exterior painting, drywall repair and replacement, • Perform general indoor janitorial support for the janitorial team., • Perform outdoor janitorial groundskeeping and maintenance., • Minor plumbing and HVAC work that does not require a license, • Minor electrical work that does not require a license, • Performs preventive maintenance and inspections of building systems, • Complete light demolition and building/property cleanouts, • Completes routine written and computerized reports on work performed and equipment used, • Assures the maintenance of safe work areas and equipment, promptly corrects work hazards, as necessary. Investigates and reports all work related injuries immediately, complies with all safety rules and attends appropriate safety programs, • Performs related duties and manual labor as assignedQualifications, • High school diploma or equivalent, • Minimum 2 years’ experience in a manufacturing environment, • Basic knowledge in mechanical repairs and troubleshooting techniques, • Proficient in Word and Excel, • Understanding of electrical safety, • Basic understanding of electrical principles such as voltage, current and resistance, • Familiar with electrical measurement devices(voltage meters), • Ability to use windows based software programs, • Ability to express verbal and written communication skills, • Demonstrate problem-solving skills, • Possess strong work ethic and knowledge of simple troubleshooting., • Skilled in following directives of more senior level technicians and/or Supervision, • Prefer some level of basic metal fabrication and welding experience, • Knowledge of and experience with proper Lock-Out, Tag-Out procedures, • Flexible and willing to work various maintenance shifts Additional Information Physical Requirements The physical demands are representative of those that must be met by employee to successfully perform the essential functions of this job. Reasonable accommodations may be made upon request to enable individuals with qualified disabilities to perform the essential functions of the job. • Must possess strength, stamina and mobility to perform heavy physical work with exposure to potentially hazardous conditions, • Will use a variety hand and power tools, may drive a motor vehicle and/or light construction equipment, fork trucks, platform lifts etc., • Lift and move materials and equipment weighing up to 90 pounds and heavier weights with the use of proper equipment and assistance, • Must be able to read printed materials and a computer screen, • While performing the duties of this job, the employee is regularly required to walk; use fingers and hands to handle or feel; reach with hands and arms; stoop and kneel; talk and hear, • The employee is frequently required to stand and sit for long periods, as well as occasionally be required to climb or balance, • Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and the ability to adjust and focus, • Exposure to variable temperatures as impacted by the weather Work Environment Mainly a manufacturing facility, where exposed to moving mechanical parts, forklifts, heavy pallets, moderate to loud noise level, and air-borne dust, powders, and fumes. While working, will be required to wear various personal protective equipment (e.g., clothing, gloves, goggles, safety glasses, steel toed shoes, cut resistant aprons, etc.) based on work area or task. Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. Cornerstone Building Brands is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, or status as a protected veteran. You can find the Equal Employment Opportunity Poster here. You can also view Your Right to Work Poster here along with This Organizations Participation in E-Verify Poster here. If you'd like to view a copy of the company's affirmative action plan for protected veterans or individuals with disabilities or policy statement, please contact Human Resources at 281-897-7788 or . If you have a disability and you believe that you need a reasonable accommodation in order to search for a job opening or to submit an online application, please contact Human Resources at 281-897-7788 or . This email is used exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only emails received for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. California Consumer Privacy Act (CCPA) of 2018 Must be at least 18 years of age to apply. Notice of Recruitment Fraud We have been made aware of multiple scams whereby unauthorized individuals are using Cornerstone Building Brand's name and logo to solicit potential job-seekers for employment. In some cases, job-seekers are being contacted directly, both by phone and e-mail. In other instances, these unauthorized individuals are placing advertisements for fake positions with both legitimate websites and fabricated ones. These individuals are typically promising high-paying jobs with the requirement that the job-seeker send money to pay for things such as visa applications or processing fees. Please be advised that Cornerstone Building Brands will never ask potential job-seekers for any sort of advance payment or bank account information as part of the recruiting or hiring process.

Job DescriptionBenefits: • Bonus based on performance, • Competitive salary, • Dental insurance, • Free uniforms, • Health insurance, • Opportunity for advancement The Crew Chief and perform restoration projects on Water, Mold, Fire & Specialized Cleaning, ensuring theyre completed on time and within scope. Leading the crew to make sure all the remediation is met to the proper standards of Paul Davis guidelines. Assist in answering and questions the customer has to meet their satisfaction. What does a Mitigation Technician Crew Chief with Paul Davis do? • Serve others within your community in their time of need, • Taking the lead in the remediation process of removing all damaged material., • Ability to perform flood cuts and set up containment for the proper scope of work., • Being able to disconnect toilets and sinks for proper removal when needed., • High level performance of water mitigation, tarping, board up, mold remediation, Fire Remediation, asbestos/lead abatement and carpet cleaning/re-installation services according to Paul Davis and industry specifications under the supervision of the Mitigation Manager., • Set up drying equipment and application of sanitizing chemicals., • Must be punctual and show up on time to work., • Must have a drivers license to have adequate transportation to get to work., • Hours will vary based on the scope of each Job., • Focus and dedication to providing excellent customer service., • Maintain a clean, properly stocked and organized truck and maintain all company equipment., • Be accessible by phone and participate, as necessary, in the on-call schedule., • Assist in warehousing and facility related tasks when necessary., • You will assist other team members as you see opportunities arise and be a leader for the team., • Willingness to wear PPE for the various jobs., • Ability to work with a wide assortment of construction and demolition tools as well as specialized drying equipment, • High School degree or GED, • 2-5 Years of experience in Restoration, • Trades experience in Pluming or Electric, • Ability to lift up to 50lbs., • Have certifications for the restoration trades, This includes IICRC certifications or similar certification accreditation.Job Compensation and Benefits:, • Leadership Development - our company grows from the inside. If you are determined and motivated enough, ask about participation in our leadership development initiative to grow your career and explore new opportunities, • Monthly cross-training opportunities to advance your career, • Paid training, • Health, dental and vision insurance, • Referral program, • Great culture and team dynamic Values: Deliver what you promise. Respect the individual. Have pride in what you do. Practice continuous improvement. Vision: To provide extraordinary care while serving people in their time of need. Mission: To provide opportunities for great people to deliver Best in Class results. Why The Team Needs You? Serving others after a disaster has struck their property is not easy. Everyone within Paul Davis needs to have a world-class work ethic, serious attention to detail and love to help people. It is challenging to make customers happy when faced with a traumatic event but you will love being a technician if you take pride in your work and have fun while working with others. Please apply if you think you have what it takes to serve others and deliver a world-class service when others need it the most. We are looking forward to discussing this opportunity with you. We support and hire Veterans and we are an Equal Opportunity Employer!

Job DescriptionJob Description JOB DETAILS Base Pay: $32.00 - $36.00 per hour plus $1 shift differential 2nd Shift: 3:45PM- 12:15PM DUTIES AND RESPONSIBILITIES • Provide multi-skilled Industrial maintenance support focused on customer service, quality, cost, and productivity in Total Productive Improvement (TPM) and continuous improvement (CI) environment, • Maintain the responsibilities and performance requirements within all fields of the Maintenance Technician Apprentice and Technician levels I & II positions, • Set up, adjust, and maintain assigned equipment with responsibility and focus on uptime and quality on all, • Understanding and performing preventive, predictive, and Line call maintenance on production machinery, completing and documenting all work in a timely fashionQualifications, • Associate degree with 1-2 years of industrial maintenance experience or 5-7 years of equivalent industrial maintenance experience, • Strong customer service skills, desire to problem solve, and ability to communicate with team members and associates, • Understand and participate in TPM initiatives, also assist in the deployment of TPM objectives, • Must have electrical skills, • Troubleshoot and repair all mechanical functions, mechanical drive units, industrial hydraulic and pneumatic powers, plumbing architectures, AC and DC circuits, electrical sensors and switches, motor controls, and servo controllers, safety circuits which include E-stops, light curtains, floor mats, safety relays, and safety switches, • Understand troubleshooting process for basic electrical equipment and electrical systems, • Understand functions of components and operating features of relays, circuit breakers Programmable Logic Controllers, motor encoders, motors, and sensors, • Understand, troubleshoot, and problem-solve issues of basic complexity in advanced electrical/mechanical systems (PLC, Drives, Servo, HMI, CNC, etc.), • Working knowledge of electrical test equipment to measure current voltage and resistance, • Understand, maintain, and troubleshoot AC and DC motors and drives, • Understand the parts, function, maintenance, and troubleshooting of typical motors, • Understanding and practice of Lock Out Tag Out requirements (LOTO), • Understand electrical arc flash protection code requirements, • Understand basic electrical circuits and safe work practices, • Ability to troubleshoot mechanical machine issues, • Inspect drive units for lubrication problems and bearing failure, • Understand types of shaft misalignment, conditions affecting alignment, measurements and measuring tools for realignment, and methods used for shaft alignment including reverse dial, laser, rim, and face, • Use necessary hand and power tools to take appropriate action to replace components, adjust, and recalibrate machinery to resolve issues, and restore equipment to operating condition, • Disassemble and reassemble gearboxes, • Maintain and troubleshoot, disassemble and reassemble hydraulic and pneumatic valves, • Measure and analyze vibration in equipment using transducers, vibration meters and vibration analyzers to determine cause of malfunction, • Ability to lift 50 pounds on a continual basis above shoulder height and below the waist Additional Information Site Location: 1 Silverline Dr. North Brunswick Township, NJ 08902 Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. Cornerstone Building Brands is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, or status as a protected veteran. You can find the Equal Employment Opportunity Poster here. You can also view Your Right to Work Poster here along with This Organizations Participation in E-Verify Poster here. If you'd like to view a copy of the company's affirmative action plan for protected veterans or individuals with disabilities or policy statement, please contact Human Resources at 281-897-7788 or . If you have a disability and you believe that you need a reasonable accommodation in order to search for a job opening or to submit an online application, please contact Human Resources at 281-897-7788 or . This email is used exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only emails received for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. California Consumer Privacy Act (CCPA) of 2018 Must be at least 18 years of age to apply. Notice of Recruitment Fraud We have been made aware of multiple scams whereby unauthorized individuals are using Cornerstone Building Brand's name and logo to solicit potential job-seekers for employment. In some cases, job-seekers are being contacted directly, both by phone and e-mail. In other instances, these unauthorized individuals are placing advertisements for fake positions with both legitimate websites and fabricated ones. These individuals are typically promising high-paying jobs with the requirement that the job-seeker send money to pay for things such as visa applications or processing fees. Please be advised that Cornerstone Building Brands will never ask potential job-seekers for any sort of advance payment or bank account information as part of the recruiting or hiring process.

Job Description The HORIBA Group of worldwide companies provides an extensive array of instruments and systems for applications ranging from automotive R&D, process and environmental monitoring, in-vitro medical diagnostics, semiconductor manufacturing and metrology, to a broad range of scientific R&D and QC measurements. Proven quality and trustworthy performance have established widespread confidence in the HORIBA Brand. Inspired by our unique motto, “JOY and FUN,” we focus on social responsibilities by building state-of-the-art products for scientific advancement; especially for protecting health, safety, and the environment. “HORIBARIANs,” the HORIBA employees all over the world, look forward to working with additional creative and entrepreneurial self-starters. To learn more about our unique culture, visit our culture page. HORIBA is a global group of companies that develops, manufactures and provides an extensive array of analytical and measurement equipment to countries around the world. HORIBA Instruments Inc., a leading manufacturer of scientific instruments has an immediate opening for a CCD Lab Technician in the Piscataway, New Jersey facility. Duties/Requirements: • Soldering skills, the ability to read mechanical and electrical drawings and schematics are a must, • Hands-on mechanical skills and familiarity with electronic test equipment such as meters and oscilloscopes., • Two – Four-year degree related to mechanical or electrical engineering and or related work experience. Compensation Package: HORIBA Instruments offers a competitive compensation package that includes a 401(k) plan with match; employee group dental, vision, life, and disability (short and long-term) paid for by the company; medical insurance, family dental and vision insurance, and supplemental life insurance available with reasonable employee contributions; employee assistance program; paid holidays, vacation, and sick time; flexible spending accounts; and educational reimbursement and commuter benefit programs. If you are an individual with a disability and need an accommodation during the application/hiring process, please call (732)494-8660 for assistance. HORIBA will provide reasonable accommodations, upon request, to support individuals with disabilities to be able to participate in the hiring process. HORIBA is committed to making our workplace accessible for individuals with disabilities. EEO/Affirmative Action/Veteran Status/Disabilities.

Job Description We're looking for Automotive Mechanics with a minimum of 5 years of professional automotive repair experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As an Experienced Auto Technician, you'll be expected to perform extensive repairs and heavy engine work, advanced vehicle diagnostics, as well as: • Repairing advanced vehicle electrical issues, • Installing, repairing, and replacing vehicle refrigerant and recovery systems Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs Not a match for this role? We have a variety of Technician roles in our Inspection Centers, depending on your level of experience - take a look below to see what you'll be doing to help us get our low-mileage, late-model cars ready for our customers: • Entry-Level Auto Technician (min 6 months professional experience): perform light maintenance, fluid checks, and/or conduct the initial inspection on our vehicles to look for any imperfections or repairs that may be needed throughout the reconditioning process., • Brake and Tire Technician (min 1 year professional experience): perform light maintenance or repairs, including changing brakes and tires, • Mid-Level (Mechanical Repair / Build / General) Technician (min 3 years of professional experience): perform light to medium automotive repairs and minimal diagnostics on our vehicles, • Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles, • Auto Technician/Mechanic roles: Lube and Oil, Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles, • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold) To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job Description We're looking for Automotive Mechanics with a minimum of 6 months of professional automotive repair experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As an Entry-Level Technician, you'll be expected to perform light maintenance, fluid checks, and/or conduct the initial inspection on our vehicles to look for any imperfections or repairs that may be needed throughout the reconditioning process. At Carvana, you'll receive a competitive wage and amazing perks – including a 401(k) with Carvana match and even a vehicle purchase discount – all while using state of the art tools in one of our high-tech Inspection Centers (click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs Not a match for this role? We have a variety of Technician roles in our Inspection Centers, depending on your level of experience - take a look below to see what you'll be doing to help us get our low-mileage, late-model cars ready for our customers: • Entry-Level Auto Technician (min 6 months professional experience): perform light maintenance, fluid checks, and/or conduct the initial inspection on our vehicles to look for any imperfections or repairs that may be needed throughout the reconditioning process., • Brake and Tire Technician (min 1 year professional experience): perform light maintenance or repairs, including changing brakes and tires, • Mid-Level (Mechanical Repair / Build / General) Technician (min 3 years of professional experience): perform light to medium automotive repairs and minimal diagnostics on our vehicles, • Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles, • Auto Technician/Mechanic roles: Lube and Oil, Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles, • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold) To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job Description We're looking for Automotive Mechanics with a minimum of 5 years of professional automotive repair experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As an Experienced Auto Technician, you'll be expected to perform extensive repairs and heavy engine work, advanced vehicle diagnostics, as well as: • Repairing advanced vehicle electrical issues, • Installing, repairing, and replacing vehicle refrigerant and recovery systems Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs Not a match for this role? We have a variety of Technician roles in our Inspection Centers, depending on your level of experience - take a look below to see what you'll be doing to help us get our low-mileage, late-model cars ready for our customers: • Entry-Level Auto Technician (min 6 months professional experience): perform light maintenance, fluid checks, and/or conduct the initial inspection on our vehicles to look for any imperfections or repairs that may be needed throughout the reconditioning process., • Brake and Tire Technician (min 1 year professional experience): perform light maintenance or repairs, including changing brakes and tires, • Mid-Level (Mechanical Repair / Build / General) Technician (min 3 years of professional experience): perform light to medium automotive repairs and minimal diagnostics on our vehicles, • Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles, • Auto Technician/Mechanic roles: Lube and Oil, Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles, • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold) To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job Description We are Bentley Labs, a cutting-edge formulation and manufacturing partner to the World’s Best Beauty Brands! Our product formulation and production capabilities are wide-ranging and distinctive – with innovative, exciting products across skin care, bath and body, hair, and lip categories. Over the past 16 years, the Bentley team has grown to include some of the industry’s brightest stars. Our diverse and talented group are ever and truly a unit—working together toward an all-consuming vision to be the best. In the past 2 years, our formulation team has won over 20 industry awards for best products in wide range of categories. We launch over 200 new products a year, and growing rapidly and seeking new R&D Chemists to join our team! As a valued member of our R&D team, this position will have hands-on responsibility to work with our formulation chemists to produce customer-winning formulas for skin care, sun care and bath & body care products including but not limited to creams, gels, lotions, serums, anhydrous and surfactant systems. This is a place where we create products that matter, relationships that last, and where ambition is supported and rewarded! We know you work hard and we want you to be successful. What will we do for you? Let us help you with tuition reimbursement. Don’t know something? Let us send you to classes. Come on in and we will show you what else we have to offer you! Who you are…you celebrate your success and others too. You focus on the right solution with each customer. Your passion for providing outstanding service contributes to our high level of customer satisfaction. Building relationships is your strong suit. You like to have fun at work too! Loud laughing encouraged. Main Responsibilities: The R&D Chemist is a key member of the company’s Research and Development Team. The primary responsibilities required for this role are: • Review new Product Development Requests (PDR’s) and collaborate with SE’s for additional clarification; assign tentative project completion dates., • Prepare lab batches of formulas needed for submitting samples for customer analysis within lab schedule, and reformulating / resubmitting them based on customer’s feedback., • Maintain detailed and organized lab notebook with detailed observations while making lab batch., • Develop detailed lab scale process for success including order of addition, critical raw materials and processing parameters, bench standard and benchmark, and lab scale preliminary specification and test results, • Work closely and collaboratively with lab technicians, to teach, coordinate and collaborate on projects leading to well-planned and executed bench work and successful sample submissions, • Perform and monitor stability with lab technician, utilizing approved stability protocol, and re-formulate if initial formula is unstable., • Meet with raw material vendors to learn about new technologies and new raw materials that can be utilized to create/improve Bentley’s innovative technology offerings., • Collaborate as a key team member across the R&D department, contributing innovative ideas, expertise, knowledge, experiences with strong team spirit, and pride in organization’s contribution to the company, • Perform/Monitor calibration and validation of all lab instruments with Lab Technicians., • Stable and compliant personal care, cosmetics and OTC products, • Timely shipment of lab samples to customers/marketing/testing facilities, • Documentation of detailed observations and specifications, • Learning of new technology via researching new raw materials and processes, • BS in Chemistry, • 3 + years of R&D experience in Personal Care, • Excellent lab processing techniques and data management, • Must have strong analytical, communication and organizational skills, • Must have a bias for action and initiative to collaborate and contribute value to the overall R&D effort

Job Description The Product Technician 3 is responsible for operating production machinery in accordance with established procedures and guidelines to produce products based on the specifications outline in the Job Book The Product Technician 3 is expected to: · Produce products that meet MICRO’s quality standards and customer specifications consistently Machine Operation 60% · Operates a variety of production equipment and machinery. · Manufacture, test, inspect, package, and label products according to defined procedures and instructions as appropriate. · Uses computer-controlled equipment to select, position and secure automatic or semi-automatic machines. · Verifies material, lubricants, solvents and packaging material are correct. · Produces products that conform to all of the requirements outlined in the job book · Monitors production process during the production run · Performs maintenance activities where applicable · Stops production when product is not in conformance and follows the nonconformance procedure. Product Inspection and Nonconformance Process 40% · Reads and interprets prints located in the job book. Verifies dimensions of finished product visually and/or by using inspection equipment per customer specifications. · Keeps inspection data based on the requirements of the job book. · Completes all necessary documentation. · Uses SPC to verify conformance of products · Identifies production or quality issues and reports it to the appropriate group. This position has no talent management responsibilities. EDUCATION AND EXPERIENCE · High school diploma or general education degree (GED) is preferred. · 0-2 years of experience in a manufacturing environment or equivalent combination of education and experience is preferred LICENSE AND CERTIFICATION · None TECHNICAL SKILLS · SPC · Blueprint OTHER SKILLS · WIP tracking · Multitasking · Personal Accountability · Problem solving · Spatial dexterity · Manual dexterity · Attention to detail · Organizational skills · Basic computer skills While performing the duties of this Job, the employee is regularly required to stand; walk; sit; use hands to touch, handle, or feel; reach with hands and arms; and talk and hear. The employee is occasionally required to stoop, kneel, crouch, or crawl. The employee must lift, push, pull, carry and/or move up to 10 pounds constantly, between 10 and 25 pounds frequently, and between 25 and 50 pounds occasionally. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. While performing this Job, the employee is regularly required to demonstrate manual and spatial dexterity sufficient to operate machinery for precision work. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts and vibration. The employee is frequently exposed to risk of electrical shock and odors, dusts, mists, fumes and/or airborne particles. The employee is occasionally exposed to wet and/or humid conditions. The noise level in the work environment varies from moderate to loud, based on the department/work area.

Job Description Field Service Associate Player One Amusement Group has an immediate full-time opening for the position of Amusement Games Service Tech (FSA). The route territory for this position includes travel to Michigan and the northern border of Ohio. As a route technician, you are responsible for managing a designated territory in an efficient and professional manner that includes experience appropriate repairs, merchandising, and collections. The hiring rate ranges from $20 - $24 hour and includes discretionary bonus eligibility. P1AG employs over 400 people in 21 offices throughout Canada and the United States. One of North America’s leading providers of interactive video, redemption, amusement gaming and vending equipment, it specializes in solution servicing and design for a wide range of customers in the theatrical exhibition vertical as well as community-based entertainment destinations such as bowling centers, restaurants, arcades, shopping centers and water parks. For more information regarding P1AG, please visit our website at . Job Duties: • Repairing equipment and troubleshooting issues, according to skill level., • Merchandising of gaming equipment (plush and prizes) as needed., • Maintain amusements equipment at customer locations in good working order, product stocked in all dispensing equipment and company policies adhered to for cleaning and aesthetics., • Responsible for accurate route collections of monies, adhering to proper cash handling procedures., • Establish and maintain professional relationship with locations and staff., • Detailed record keeping of all meters., • Complete follow up as assigned., • Ensure each location is set up to maximize revenue and earning potential through location rotations and promotion opportunities., • High School or equivalent, • Solid experience managing a route or field service background, • Experience within the amusement gaming industry is a big plus, • Driving record must be clean and upheld, • Detailed and customer service-oriented, • Solid work ethic for being punctual, dependable, and customer-driven, • Efficient at managing a workload with minimal supervision, • Accountable, Productive, and Personable, • Always working accurately and efficiently We offer: Annual bonus opportunity, Flexible hours, Paid time off, including Vacation and Sick leave, Medical, Dental, Vision, 401(k) with match, Life insurance, Short and Long-term disability coverage and more. All your information will be kept confidential according to EEO guidelines. While we appreciate all interest, only those candidates selected for an interview will be contacted. As part of P1AG’s standard recruitment process, suitable candidate(s) will be required to undergo pre-employment screening as a condition of employment or promotion. Interested applicants, please apply today. While we appreciate all interest, only those candidates selected for an interview will be contacted. As part of Player One Amusement's standard recruitment process, suitable candidate(s) will be required to undergo pre-employment screening as a condition of employment or promotion. No Agency Calls Please

Job DescriptionCarvana Diesel Technician: Join Our Fleet Maintenance Team! Join our rapidly growing team at Carvana, where we're revolutionizing the car-buying experience! We're seeking a skilled and dedicated Diesel Technician to join our innovative Fleet Maintenance team. If you're a problem-solver who enjoys working on Class 8 trucks and trailers and is passionate about vehicle uptime, we want to hear from you. Why You'll Love Working Here We're proud to offer our team members a supportive, collaborative environment and outstanding benefits. • Competitive Pay & Benefits:, • Competitive hourly rates:, • Technician II - $25-32 hourly, • Technician III - $31-37 hourly, • Comprehensive medical, dental, and vision coverage, • Matching 401k, • PTO: Accrue 104 hours in your first year!, • Tool Allowance: Receive a $500 annual tool allowance to keep your equipment up-to-date., • Boot Allowance: Get a $100 boot allowance every 6 months to ensure you have the right gear., • Investments in Your Future:, • ASE certification reimbursement (we cover the cost!), • Tuition reimbursement and student loan repayment programs, • Opportunities for growth and advancement within a rapidly expanding company, • Internal training, including classroom time for DTNA ARC Certification, • Unique Perks:, • Carvana employee discount on vehicle purchases You'll perform a variety of tasks, with clear pathways for growth: • Routine Maintenance & Repair: Perform preventative maintenance, inspections, and component replacements on our fleet., • Diagnostics: Utilize diagnostic tools and software to troubleshoot complex electrical, engine, and transmission problems., • System Repairs: Address issues with aftertreatment systems (DEF/emissions), perform regens, and change filters., • Collaborate & Optimize: Work with your team to maintain accurate records, optimize vehicle performance, and minimize downtime., • Experience: 1-3 years (or more) of experience with Heavy-Duty Class 8 trucks and trailers or similar equipment (e.g., agricultural, construction, waste collection truck)., • Technical Skills:, • Strong diagnostic and troubleshooting skills for diesel engines, transmissions, and vehicle systems., • Proficiency with diagnostic software and using a laptop for manuals., • Experience with aftertreatment systems and electrical diagnostics., • Comfortable with MIG welding is a plus., • Certifications & Training:, • A minimum of two ASE Certifications within the first 6 months of employment (we'll reimburse you!)., • T-series ASE Certifications are highly valued., • Requirements:, • A valid Driver's License with a clean driving record, • Ability to perform physical tasks associated with vehicle maintenance (lifting, bending, etc.)., • Strong attention to detail and a commitment to quality workmanship. Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check and drug test. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job Description C&C Lift Truck is a growing forklift dealership and has proudly been servicing businesses throughout New Jersey, Pennsylvania, Long Island, and NYC’s five boroughs for over 41 years. We are looking for a Service Writer and Warranty Administrator who is ready for a challenging and rewarding opportunity at our company. This position is a key part of our service team. Your strong work ethic, reliability and positive attitude will make you an asset to our entire organization. You will be supported by a strong management team that will help you achieve your goals. Excellence in this challenging and rewarding position paves the way for advancement opportunities. As a Service Writer, you will be responsible primarily for all aspects of customer repair quotes. This individual assigns jobs to technicians and coordinates their daily schedule and other work activities. The role is actively involved in maintaining positive customer communication and satisfaction. As a Warranty Administrator, you will manage warranty claims, process reimbursements, and ensure compliance with manufacturer policies. This individual will oversee warranty documentation, track claim status, and collaborate with technicians, service, and manufacturers to ensure efficient processing of warranty-related transactions. Service Writer Responsibilities: • Creates all customer repair quotes, requests parts pricing, and determines labor time., • Utilizes a proactive approach to customer service, anticipating needs and potential issues; resolves customer complaints in a timely manner., • Provides real-time updates to customers on expected service dates, ETAs on returns, or any scheduled changes due to technician availability., • Regularly promotes and sells service products to customers, generating increased revenue., • Maintains an inventory of all customer repairs awaiting approval and follows up on unsigned quoted repairs., • Manages assigned technicians to ensure effective completion of day-to-day service operations., • Coordinates technician schedules to align customer account needs and technician capabilities., • Sets technicians schedules by no later than 3 pm daily and informs scheduled customers., • Codes Workorders with correct Unit ID, Make Model and Serial Numbers., • Follows all special billing procedures for major accounts, including verifying correct POs are provided and entered into Workorders, work is accepted through customer portals, and amounts match approved work., • Opens and bills Workorders in a timely fashion., • Manages overall job progress, ensuring field technicians are diagnosing problems within two hours of arrival at customer locations; makes recommendations for technicians to utilize the assistance of technical communicators in troubleshooting complex issues., • Works with technicians to resolve problems, making every effort to ensure he/she fully completes each job assigned., • Manages work in progress to ensure all work orders are completed in a timely manner and reviews completed jobs for accuracy of descriptions, hours, etc., • Approves, codes, and processes jobs to ensure labor and parts detail are complete and accurate; reviews parts and labor captured on jobs and ensures jobs are closed out with accurate information in the system., • Establishes regular communication with account managers to resolve any ongoing issues with customers’ accounts., • Works closely with the Parts Department to acquire correct parts and pricing and attached correct labor time to each repair., • Schedules monthly preventive maintenance work to ensure PM completion rate goals are met., • Monitors technicians’ time cards, maintaining accurate records for customer invoicing., • Adjusts technician time cards in Tinnacity daily to correct and minimize unbilled or standby time., • Reviews and submits technician payroll information to front office., • Performs other duties as assigned. Warranty Administrator Responsibilities: • Prepares, submits, and tracks warranty claims with forklift manufacturers and suppliers., • Reviews repair orders, service reports, and invoices to ensure warranty eligibility., • Communicates with manufacturers regarding claim approvals, rejections, and appeals., • Communicate effectively with team members to ensure all are informed about warranty processes and updates., • Maintains accurate records of all warranty transactions and claim statuses., • Works closely with service technicians to ensure proper documentation of repairs., • Monitors manufacture warranty policies and ensures compliance with guidelines., • Builds and maintains strong relationships with vendors and manufacturers., • Handles any disputes or issues related to warranty claims professionally and efficiently., • Follows up on unpaid claims and resubmits when necessary., • Provides warranty training and updates to service and sales teams., • Assists with parts returns and core tracking related to warranty claims., • Generates warranty reports and analyzes claim trends for process improvement., • Performs other duties as assigned. Job Requirements: • High school diploma or equivalent; additional training in business or technical fields is a plus., • One to three years of industry experience in material handling/forklifts., • One to three years of experience in warranty administration, preferably in the automotive, forklift, or heavy equipment industry., • Proficiency in warranty management software and Microsoft Office (Excel, Word)., • Knowledge of forklift components and repair processes is a plus., • Ability to exercise judgment and maintain a professional demeanor on the job., • Ability to work independently and meet deadlines in a fast-paced environment., • Excellent communication and customer service skills., • Strong attention to detail and organizational skills., • Ability to meet work hour demands as needed., • Valid driver’s license. Benefits: • Paid holidays after six months of employment, • 1 week PTO time after one year of employment, thereafter, following the PTO outlined in the employee handbook, • Earned sick leave per year up to 40 hours as outlined in the employee handbook, • Optional Medical & Dental Benefits, • Optional 401(k) plan – quarterly based enrollment We are an equal opportunity employer. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws.

Job Description Position Summary: The Production Technician – Chemical Reagents and Kit Assembly will be responsible for manually building and assembling chemical reagents and kits. This role requires a hands-on, detail-oriented individual capable of following precise production protocols to ensure product quality and consistency. Key Responsibilities: • Kit Assembly: Manually assemble chemical reagent kits according to detailed instructions and quality standards., • Preparation of Reagents: Measure, mix, and prepare chemical reagents, adhering to all safety and quality procedures., • Quality Control: Perform routine checks to ensure that products meet specified quality standards and report any inconsistencies., • Inventory Management: Track inventory levels of materials, report shortages, and assist in ordering supplies as needed., • Documentation: Maintain accurate records of production processes, quality control checks, and inventory use., • Safety Compliance: Follow safety protocols for handling and storage of chemicals; participate in safety training. Skills Required: • Excellent attention to detail and manual dexterity., • Ability to follow precise instructions and adapt quickly to new processes., • Strong organizational skills and ability to work in a structured, process-oriented environment., • Other Requirements: Must be comfortable working with chemicals and handling materials according to safety protocols.Why Join Us?, • Competitive salary and benefits package., • Opportunity to work in a growing company with a collaborative team.

Job DescriptionJob Title: Chemistry Technician II Job Description We are seeking a dedicated and skilled Chemistry Technician II to join our fast-paced, high throughput laboratory. This role involves planning, performing, and completing projects under direct supervision, with opportunities for growth into Method Development and Validation roles. The ideal candidate will be part of a close-knit team in the Discovery Support Lab, contributing to various analytical chemistry projects. Responsibilities • Plan, perform, and complete projects under direct supervision., • Execute method performance, transfer, development, feasibility, and validation., • Demonstrate proficiency in setting up, adjusting, operating, and calibrating laboratory equipment., • Independently perform lab tests to determine physical and chemical characteristics., • Conduct data analysis and initiate technical assessments., • Utilize data acquisition software and instrument operating software effectively., • Adhere to standard concepts, practices, procedures, and regulations., • Exercise a certain degree of independence and judgment in primary job functions., • Perform other duties or special projects as required or assigned.Essential Skills, • Proficiency in HPLC, wet chemistry, and GC (Chromatography)., • Experience in stability testing., • Knowledge of analytical chemistry with a BA/BS in Chemistry, Biology, or a related scientific degree preferred., • 1-4 years of related industry experience in an analytical laboratory., • Understanding of laboratory safety precautions and protocols., • Strong organization, communication, and analytical skills., • Intermediate mathematical skills, including algebraic functions, statistics, and geometry.Additional Skills & Qualifications, • Ability to communicate technical and business information effectively., • Capability to define problems, collect data, establish facts, and draw valid conclusions., • Flexibility to work varied and extended hours/days as business dictates., • Physical ability to lift/carry/move up to 10 pounds regularly and up to 50 pounds occasionally.Work Environment Work in a dynamic, fast-paced laboratory environment with a total of 45 employees, including 27 technical staff. The Discovery Support Lab consists of a Lab Manager and 7 other team members. The position operates on a 1st shift schedule, Monday-Friday from 8:30 AM to 5:00 PM. Employees have the opportunity to take on significant responsibilities within a mid-size company that fosters long-term growth and professional development. Pay and Benefits The pay range for this position is $27.00 - $28.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Piscataway,NJ. Application Deadline This position is anticipated to close on Sep 19, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email for other accommodation options.

Job DescriptionDescription: About Us: Approved Fire Protection Co. is New Jersey's oldest family-owned, full-service fire protection and safety equipment company. Our services include fire extinguishers, alarm systems, suppression systems, SCBA, gas detection, carbon dioxide, oxygen, sprinkler systems, and so much more. Approved Fire Protection’s mission is to supply life safety products and service to the industrial, commercial, pharmaceutical, and municipal companies in New Jersey and near surrounding areas. Job Summary: We are seeking an experienced and dependable Field Sprinkler Project Specialist to join our team. This position is ideal for a skilled Fire Sprinkler Technician who thrives in the field and has the ability to work closely with Project Managers to ensure successful execution of commercial and industrial sprinkler system projects. The Field Sprinkler Project Specialist will be responsible for overseeing the on-site installation and maintenance of fire sprinkler systems, coordinating day-to-day field activities with the Project Manager, and ensuring work is completed in accordance with plans, codes, and safety standards. This is a hands-on field role requiring a high level of technical expertise, communication, and organizational skills. Benefits: · Medical · HSA · Dental · Vision · 401k with company contribution · Aflac · Life Insurance · Long term disability · Summer Hours Program · Profit Sharing · PTO Requirements: Essential Duties and Responsibilities: • On-site technician for Fire Sprinkler projects., • Coordinate with Project Managers on each jobsite., • Inspect, test, and service sprinkler systems in accordance with applicable fire codes., • Must have hands-on experience with field tools and equipment used in fire sprinkler installation and maintenance—including mechanical, electrical, and pneumatic systems—and must adhere to all applicable job site safety protocols and procedures., • Process all service paperwork timely and accurately., • Able to update and maintain information and processes in the company software system (Profit Zoom)., • Capable of handling on call (after-hours) emergency services work and regular hour emergency service jobs. Required Qualifications: • Prior experience, minimum 2 years, in Water-Based Systems Layout, with demonstrated experience in field installation and coordination on commercial or industrial sprinkler projects., • Strong written and verbal communication skills., • Ability to be proactive in communicating and working with other departments., • Valid driver's license and excellent driving record., • Must pass a background check and pre-employment drug screen., • Must be willing to travel throughout NJ as required to project field locations., • Excellent customer service skills., • Must be competent with all work-related power tools., • Excellent work ethic., • Comply with unform policy., • Strong understanding of NFPA 13 and related codes., • Ability to read and interpret construction documents and sprinkler system plans., • Experience coordinating with project managers, inspectors, and other trades on active job sites., • OSHA 30 Certification or equivalent safety training., • Ability to work in a team or on their own. Equal Opportunity Employer/Veterans/Disabled Approved Fire Protection is deeply committed to a policy of equal employment opportunity for all its job applicants and employees. We seek to employ qualified persons in all job classifications and to administer all personnel actions affecting our employees without discrimination on the basis of race, color, religion, sex, pregnancy, age, national origin, sexual orientation, gender identity, political ideology, ancestry, or genetic information. Individuals with a disability, disabled and other protected veterans and any other characteristic protected by applicable law will be given the fullest consideration for employment in positions for which they are qualified. We also are committed to making reasonable accommodation for qualified individuals with a disability as well as abiding by any and all state and local laws, which in addition to the above prohibit discrimination in any form

Job DescriptionGreat Opportunity! Perspective Therapeutics is seeking a qualified Radiopharmaceutical Production Technician to join our team in Somerset, NJ working the night shift. This position produces radiopharmaceutical products in a just-in-time environment to support clinical and commercial demand. They are responsible for executing all tasks associated with preparation, manufacturing, assembling, and packaging of radiopharmaceutical products, adhering to cGMP Guidelines to meet production demands. (Visit ). Essential Functions: • The Radiopharmaceutical Production Technician performs material kitting, line cleaning and line clearances; sets-up isolators and line equipment and performs all tasks associated with production including formulation, dispensing and packaging., • The Radiopharmaceutical Production Technician performs all tasks associated with manufacturing in an aseptic environment, donning proper personal protection equipment and adhering to all safety protocols., • Supports all technical aspects related to pharmaceutical production readiness including manually cleaning the classified manufacturing area and performing environmental and personal monitoring., • Performs complex batch record calculations and maintains all documentation according to cGMP guidelines and participates in assigned qualification and validation activities, as necessary. The associate adheres to the ALCOA+ principles in every aspect of GMP documentation., • The Radiopharmaceutical Production Technician ensures they’re actively training on revised SOPs and completes OJT training and qualification within 6 months of hire date., • Due to manufacturing time constraints and patient demand, overtime will be required to ensure process continuation or completion.Qualifications:, • Bachelor’s degree in applied science or minimum of two or more years of relevant work experience in a pharmaceutical or cGMP manufacturing industry., • Experience with MS Office Suite., • Aseptic processing and technique experience is highly preferred., • Ability to learn and understand radiopharmaceutical production. Actively participates in and contributes to advanced safety programs aimed at ensuring the utmost protection for all personnel., • Capable of handling physically demanding tasks, including lifting loads up to 50 lbs. and performing frequent crawling, stooping, crouching, and kneeling. Maintains a high level of fitness and agility to excel in challenging work environments., • Ability to don a variety of advanced personal protective equipment, ensuring strict adherence to safety guidelines and regulations., • Flexibility to work varying shifts, including overnight and weekends, exhibiting a commitment to meeting production demands and deadlines. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Perspective Therapeutics is an Equal Opportunity Employer. Powered by JazzHR FAaPOOoBW9

Job DescriptionAbout GenScriptGenScript Biotech Corporation (Stock Code: 1548.HK) is a global biotechnology group. Founded in 2002, GenScript has an established global presence across North America, Europe, the Greater China, and Asia Pacific. GenScript's businesses encompass four major categories based on its leading gene synthesis technology, including operation as a Life Science CRO, enzyme and synthetic biology products, biologics development and manufacturing, and cell therapy.GenScript is committed to striving towards its vision of being the most reliable biotech company in the world to make humans and nature healthier through biotechnology.About ProBioProBio proactively provides end-to-end CDMO service from drug discovery to commercialization with proactive strategies, professional solutions and efficient processes in cell and gene therapy, vaccine, biologics discovery and antibody protein drug to accelerate drug development for customers. ProBio's total cell and gene therapy solution covers CMC of plasmid and virus for IND filing as well as clinical manufacturing and commercial manufacturing. Job Scope: The Project Engineer serves as support for the planning, design, and execution of capital projects while being the primary subject matter expert (SME) for electrical and utility MEP systems during major facility construction and expansion projects (230,000+ sq ft plus additional lab buildouts). Key systems include power distribution (medium/low voltage), UPS, emergency power, lighting, and building utility systems (e.g., process water, gases, vacuum, compressed air). This role focuses on ensuring these systems are designed, constructed, and commissioned to meet performance, reliability, and compliance standards. In addition to project execution, the Project Engineer will provide high-level technical guidance to junior facilities staff and support strategic decision-making for existing systems, but will not be responsible for daily maintenance. As GenScript grows its U.S. footprint, having robust, scalable infrastructure is essential. This role offers a rare opportunity to design foundational systems for how we manage equipment and facilities, while also driving in-house maintenance capability, energy efficiency, and cost optimization. Your leadership will directly influence operational resilience, response time, and long-term cost control. Details: This is a full-time role based onsite in Piscataway, NJ. The estimated salary range is $70,000 - $85,000, based on experience. Primary Responsibilities: Project Execution: • Lead the electrical/utility scope for major capital projects from design review to commissioning., • Review design drawings, technical specifications, and submittals for electrical distribution, backup power, grounding, and utility systems to ensure compliance with codes, project requirements, and best practices., • Coordinate with architects, engineers, and contractors to resolve design and field issues., • Oversee installation, testing, and commissioning of electrical and utility systems, ensuring proper performance verification and documentation., • Support construction scheduling, cost control, and quality management in collaboration with the Senior Construction Manager., • Conduct periodic inspections of existing electrical and utility systems to identify risks or upgrade opportunities., • Advise junior staff and vendors on maintenance strategies, safety protocols, and energy optimization measures., • Set technical standards for CMMS (Computerized Maintenance Management System) data entry and reporting related to electrical and utility systems., • Ensure designs and installations meet all applicable codes (NEC, NFPA, local/state building codes) and industry standards., • Bachelor's degree in Electrical Engineering, Architectural/Building Engineering (electrical emphasis), or a closely related field., • 3+ years of experience in electrical and utility systems engineering within industrial, life sciences, or manufacturing environments., • Proven track record in design review, construction coordination, and commissioning of power distribution and utility systems., • Strong understanding of NEC, NFPA, IEEE, and related electrical codes/standards., • Proficiency in reading and interpreting engineering drawings, specs, and as-builts., • Ability to manage multiple priorities in a fast-paced, project-driven environment., • Experience with process utilities for labs (e.g., DI/RO water, lab gases, vacuum, compressed air)., • Familiarity with Building Management Systems (BMS) and Energy Management Systems (EMS)., • PE (Professional Engineer) license, LEED AP, or equivalent certifications., • Builds systems, not just reacts to problems — you design processes that prevent recurring issues., • Thinks like an owner — proactive, reliable, and focused on long-term outcomes., • Leads with clarity and empathy — your team knows where they're going and feels supported., • Communicates across levels — from technician to senior leadership, you know how to align. #LI-EB1 #GS GenScript USA Inc/ProBio Inc. is a proud equal opportunity/affirmative action employer committed to attracting, retaining, and maximizing the performance of a diverse and inclusive workforce. It is the Company's policy to ensure equal employment opportunity without discrimination or harassment based on race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity or expression, age, disability, national origin, marital or domestic/civil partnership status, genetic information, citizenship status, uniformed service member or veteran status, or any other characteristic protected by law. GenScript USA Inc./ProBio Inc. maintains a drug-free workplace. Please note: Genscript USA Inc./ProBio Inc. will only contact candidates through verified application sources. GenScript/Probio does not request personal information from candidates through individual email or any other platform.

Job DescriptionDescriptionA great place to work and grow, Naik Group is a dynamic, multi-discipline engineering company with offices in New York and New Jersey. Our continued growth in this highly competitive market is evidence of the trust and value clients place in our services’ quality and timeliness. Included in the full range of professional services we offer are Bridge/ Structural Design & Inspection, Highway/Roadway Engineering, Civil/Site Engineering, Traffic Engineering/ITS, Utility Engineering, Construction Management & Inspection, Design Build, Survey, Right of Way, and High Definition 3-D Laser Scanning. Our principals take considerable pride in their approach to the firm’s management, offering services like that of a large organization while demonstrating the personal client and consultant relationship of a small firm. Naik Consulting Group is currently seeking a Survey CAD Technician. Naik is a New York-New Jersey engineering services firm which specializes in engineering design, field inspection, and Project Management/Construction Management, primarily in the transportation infrastructure industry. Responsibilities • Process field survey data to produce topographic, boundary, ALTA, as-built, and construction survey drawings, • Create and maintain CAD drawings using AutoCAD Civil 3D or similar platforms, • Draft plats, legal descriptions, and other survey-related documents, • Collaborate with surveyors, engineers, and project managers to ensure drawing accuracy, • Interpret field notes, sketches, and other documentation, • Organize and maintain digital drawing files and project documentation, • Follow CAD standards and assist in developing best practices, • Support field crews by preparing base files and construction staking sheets Qualifications • 2+ years of experience in a similar CAD technician or survey drafting role, • Proficiency in AutoCAD Civil 3D (or MicroStation/InRoads if applicable), • Understanding of land surveying principles, data collection, and coordinate systems, • Strong attention to detail and accuracy in drafting, • Ability to read and interpret construction and engineering plans, • Excellent organizational and communication skills BenefitsNaik offers a competitive compensation package including: • Holiday and paid-time-off programs, • 401(k) Plan and Match, • Career Path Development Program (Management & Technical Career Tracks), • Tuition Reimbursement, • Competitive health and dental insurance premiums, • Short-Term Disability/Long-Term Disability, • Life insurance, • Employee Assistant Program (EAP), • Flexible Spending Account, • and MoreNaik is a Drug and Alcohol-Free workplace, an Equal Employment Opportunity employer and E-Verify employer. We are committed to pay transparency and fairness in hiring. This posting complies with the Pay and Benefit Transparency Laws, which requires employers to disclose compensation and benefits information in all job advertisements.

Job DescriptionAbout GenScriptGenScript Biotech Corporation (Stock Code: 1548.HK) is a global biotechnology group. Founded in 2002, GenScript has an established global presence across North America, Europe, the Greater China, and Asia Pacific. GenScript's businesses encompass four major categories based on its leading gene synthesis technology, including operation as a Life Science CRO, enzyme and synthetic biology products, biologics development and manufacturing, and cell therapy.GenScript is committed to striving towards its vision of being the most reliable biotech company in the world to make humans and nature healthier through biotechnology.About ProBioProBio proactively provides end-to-end CDMO service from drug discovery to commercialization with proactive strategies, professional solutions and efficient processes in cell and gene therapy, vaccine, biologics discovery and antibody protein drug to accelerate drug development for customers. ProBio's total cell and gene therapy solution covers CMC of plasmid and virus for IND filing as well as clinical manufacturing and commercial manufacturing. Job Scope: The Lead Facility Engineer serves as the primary technical subject matter expert (SME) for mechanical, electrical, and plumbing (MEP) systems—particularly HVAC—during major facility construction and expansion projects (230,000+ sq ft plus additional lab buildouts). This role is responsible for ensuring that new facilities are designed, constructed, and commissioned to meet performance, safety, and compliance requirements. In addition to capital project responsibilities, the Lead Facility Engineer will provide high-level technical oversight of existing facilities, advising junior staff and aligning operational decisions with long-term reliability and efficiency goals. As GenScript grows its U.S. footprint, having robust, scalable infrastructure is essential. This role offers a rare opportunity to design foundational systems for how we manage equipment and facilities, while also driving in-house maintenance capability, energy efficiency, and cost optimization. Your leadership will directly influence operational resilience, response time, and long-term cost control. Details: This is a full-time role based onsite in Piscataway, NJ. The estimated salary range is $90,000 - $105,000, based on experience. Primary Responsibilities: • Serve as the HVAC/MEP technical lead for major capital projects, from design through commissioning., • Review and validate design documents, technical specifications, and contractor submittals for compliance with project requirements, codes, and best practices., • Coordinate with architects, engineers, and contractors to resolve design or field issues and ensure alignment with operational needs., • Oversee installation, testing, and commissioning of MEP systems, ensuring performance verification and turnover documentation are complete., • Support construction scheduling, cost control, and quality management, in collaboration with the Senior Construction Manager., • Lead and document punch list resolution for MEP scope., • Conduct periodic inspections and assessments of major building systems to identify risks or improvement opportunities., • Provide technical guidance to junior facilities staff and vendors managing day-to-day maintenance., • Lead the development and oversight of preventive maintenance plans for all facility-owned equipment (e.g., air handlers, boilers, pumps, compressors)., • Set standards for CMMS (Computerized Maintenance Management System) usage and review work order trends, costs, and completion rates for improvement opportunities., • Oversee the planning and supervision of facility routines, preventive maintenance, and operational readiness across all sites., • Bachelor's degree in Mechanical Engineering, Electrical Engineering, Civil/Structural Engineering, Architectural/Building Engineering, or a closely related field., • 4-6+ years of relevant experience in facilities/MEP engineering, construction, or capital projects within industrial, life sciences, or manufacturing environments. Includes experience in HVAC preventative maintenance, balancing, assessment, and knowledge of fabrication techniques., • 2+ years in a technical lead or supervisory capacity., • Proven experience as an HVAC/MEP SME on large capital projects (design review, field coordination, installation oversight, commissioning)., • Experience with AutoCAD and MS Office., • Ability to read and interpret drawings, specs, and submittals, and coordinate RFIs/field changes., • Strong knowledge of the building process, construction principles, relevant codes, and industry standards., • Knowledge of controls and BMS (Building Management Systems)., • Demonstrated ability to set up and oversee preventive maintenance strategies for mission-critical equipment., • Experience in construction administration, commissioning, and startup of HVAC and mechanical/plumbing systems., • Experience in commissioning and system startup., • Understanding of EAV (Exhaust Air Valve), fume hoods, and ventilation requirements in specialized facilities., • Builds systems, not just reacts to problems — you design processes that prevent recurring issues., • Thinks like an owner — proactive, reliable, and focused on long-term outcomes., • Leads with clarity and empathy — your team knows where they're going and feels supported., • Communicates across levels — from technician to senior leadership, you know how to align. #LI-EB1 #GS GenScript USA Inc/ProBio Inc. is a proud equal opportunity/affirmative action employer committed to attracting, retaining, and maximizing the performance of a diverse and inclusive workforce. It is the Company's policy to ensure equal employment opportunity without discrimination or harassment based on race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity or expression, age, disability, national origin, marital or domestic/civil partnership status, genetic information, citizenship status, uniformed service member or veteran status, or any other characteristic protected by law. GenScript USA Inc./ProBio Inc. maintains a drug-free workplace. Please note: Genscript USA Inc./ProBio Inc. will only contact candidates through verified application sources. GenScript/Probio does not request personal information from candidates through individual email or any other platform.

Job Description We are seeking a Electrical and Instrumentation (E&I) Technician for our Dayton, NJ plant. The E&I Technician will be a key player in our plant operations. The ideal candidate for this role will support and maintain plant electrical, controls and instrumentation systems and will have the ability to operate equipment and machinery safely, as well as maintain and troubleshoot plant electrical distribution panels. Direct hire Shift: (1) 12 hour day shift 6:30am-7:00pm on our 2-2-3 schedule, and (1) 1st shift opening 6:30am-3:00pm M-F. Offering $34-36 an hour Duties • Install, maintain and troubleshoot all 480vac to 24vdc plant electrical systems and Motor Control Centers, • Use EI&C skills to be able to troubleshoot and repair process and packaging equipment (fillers, conveyors, drives, packers, palletizers, etc.), • Troubleshoot PLCs, HMIs, VFDs, servo drives and other electronically controlled equipment, • Install, setup, calibrate, inspect and troubleshoot process instrumentation equipment, • Troubleshoot PLC and HMI (Wonderware and other) programming, • Provide on-going support for evolving machine controls needs and provide the daily support required to maintain the manufacturing systems by maintaining, troubleshooting and modifying/editing EIC systems, technologies, and documentation, • Electrical training of new EIC Tech’s and plant Technicians, • Provide leadership to the team/plant for both technical and operational challenges and flows to the work to improved team performance, • 5+ years of experience as an Electrician, • Minimum 1 to 2 years of experience in a high-speed production environment; Food manufacturing/bottling preferred., • Experience working in a fast-paced environment., • Formal EI&C education via trade/vocational school, military or other industrial electrical certification or equivalent work experience a plus, • Basic MS Office knowledge, • Organizational skills, • Self-starting, • Strong decision making and problem-solving skills, • Experience with Power Distribution Systems up to and including 480VAC with working knowledge of the N.E.C. and strong experience with basic electrical tools (Meggers, Amp meters, Volt meters, conduit tools, etc.). Able to read power and controls schematics., • Experienced with integrating electrical, instrumentation and mechanical knowledge into a single troubleshooting system and operating equipment experience, • Experience with the Utilities, Process, and Machine Controls systems below or equivalent: PLC-5, SLC500, Control Logix 5000, communication Networks (DH+, Control net, Device net, Ethernet). Vision systems, online printing/coding system is a plus. Allen Bradley 1336, SEW drives, Power Flex series motor controls, Pacific Scientific/Krones/Rockwell or other Servo Controls, • Knowledge of Operator Interface Systems, • Wonderware HMI and Panel View HMI or equivalent, • Experience with Instrumentation, • Experienced in the calibration of flow, pressure, level, and temperature instruments., • Capable of supporting basic board level electronic system repairs (i.e. troubleshoot to the board level and replace boards as necessary), • Familiar with P&IDs and able to use as tool for troubleshooting, • Experience in a flexible, multi-skilled, team based working environment.Company DescriptionOur Professional Division works with clients as a stakeholder in their hiring strategy and process. We facilitate a solid match for our employees and clients, examining the experience and team dynamics required for a great match. Our professional team was handpicked from 25 years of recruiting and staffing experience to build our Professional team to be the best in the industry. We focus on professional placements in your Executive Placement, Accounting & Finance, Human Resources, and Administrative Support areas. We place candidates leveraging direct hire, contract-to-hire, contingent, and “Smart Hire” modalities.Our Professional Division works with clients as a stakeholder in their hiring strategy and process. We facilitate a solid match for our employees and clients, examining the experience and team dynamics required for a great match. Our professional team was handpicked from 25 years of recruiting and staffing experience to build our Professional team to be the best in the industry. We focus on professional placements in your Executive Placement, Accounting & Finance, Human Resources, and Administrative Support areas. We place candidates leveraging direct hire, contract-to-hire, contingent, and “Smart Hire” modalities.

PrideStaff - 564221 [Production Operator / Assembly Line Worker] As a Manufacturing Technician at PrideStaff, you'll: Safely operate process equipment using computerized control systems; Monitor and analyze equipment and process activity to accurately document process conditions; Physically maneuver

Behavior Technician (BT or RBT) In Home After-School Hours Autumn ABA offers high-quality ABA services to families throughout New Jersey. We seek a part-time Registered behavior technician (RBT) or behavior technician (BT) to work with a preschool-aged client with autism for in-home (ABA) therapy after school hours. We pride ourselves on a positive work culture and believe in a healthy work-life balance. A comprehensive training and onboarding process will enable you to feel comfortable and confident in conducting therapy sessions. We offer a flexible schedule, competitive rates, and potential travel compensation. Your responsibilities: Conduct therapeutic ABA services in the home environment for children with autism Track and maintain data collection of session activities and programs developed by supervising BCBA Maintain anecdotal session notes for each therapy session and required paperwork Collaborate and communicate with supervising BCBA and other team members Requirements: Behavior Technician (BT) High School Diploma (required) Bachelor’s degree in psychology, special education, and/or social work (preferred) Experience working with young children (preferred) Job Type: Part-time Pay: $25.00-28.00 per hour Expected hours: 10 – 15 per week Benefits: Flexible schedule Schedule: Monday to Friday, Weekends as needed Application Question(s): Do you have experience with Behavioral Health? Education: High school or equivalent (Required) Experience: Applied Behavior Analysis (Required) Ability to Commute: Parlin, NJ (Required) Willingness to travel: 100% (Required) Work Location: In person IND123

Job Description Immediate openings for both day and night shifts, top area hospital institution The Patient Care Technician is responsible for assisting registered professional nurses, in the care of the patient. He/she performs all of the essential generic job functions as listed below. -Welcomes patients and checks for proper identification bracelets. -Prepares the patient for assessment/admission, physical examination and procedures. -Draws intravenous or capillary blood from newborn through geriatric aged patients using proper aseptic collection techniques, assure appropriate labeling and processing of specimens to expedite through put of patients. -Performs EKG for patients as directed. -Assures the presence, functionality and cleanliness of all necessary equipment. -Assists in the transport of patient to departments or units upon request. -Assists with preparation as necessary assuring the patient is assisted with meals/ or fed as needed. -Checks inventory of assigned area and restocks as directed. -Ensures room environment is prepared for admission. -Provides direct hygiene and comfort care to patients including bathing, toileting, oral hygiene, incontinent care, and bed making. -Takes vital signs on admission under the direction of the RN, and documents accordingly, and notifies the RN of results, assists with admission as appropriate inclusive of checking of patient ID bands. -Performs and documents glucose finger sticks and collects other specimens as directed. -Obtains and documents daily patient weights and observes and documents patient’s intake and output. -Provides a safe patient environment by answering call lights promptly, communicating with the RN immediately for any change in the patient’s condition. -Identifies the needs of the patient population served and modifies and delivers care that is specific to those needs not limited to (i.e., age, culture, language, hearing and/or visually impaired, etc.). -This process includes communicating with the patient, parent, and/or primary caregiver(s) at their level (developmental/age, educational, literacy, etc.). -Contacts: Regular contact with Medical Center personnel, patients and visitors. -At least one (1+) year PCT or CNA experience in a hospital setting strongly preferred.

Job DescriptionBenefits: • 401(k), • Bonus based on performance, • Flexible schedule, • Opportunity for advancement, • Paid time off, • Support and training for industry certifications, including CIT and CLIA, • Career advancement opportunities, • A great work environment with a team atmosphere, • A fully equipped vehicle with industry-leading tools and technology, • $25.00 $30.00 per hour + bonus opportunities, • Salary plus bonus opportunities available for qualified individuals, • Phone and/or field tablet providedLEVEL TWO TECHNICIAN RESPONSIBILITIES, • Valve and manifold repair and rebuilding, • Installing high-tech smart irrigation controllers, • Adding on to existing systems, • Install Micro and drip irrigation installation and enhancements, • Install High-tech sensor and flow sensing installationLEARNING ON THE JOB, • Work independently, yet be part of a team working directly with a Sales Technician, • Assess residential irrigation systems through our proven SES sales process, • Assess commercial irrigation systems through our proven CSA sales processQUALIFICATIONS, • 2+ years of documented irrigation industry experience and proficiency required, • Clean driving record, • Results-oriented, • Motivation to earn production bonuses, • Great attitude with a desire for growth, • Ability to work regular physical labor outdoors in a variety of weather conditions

Job DescriptionCompany Description Eurofins Scientific is an international life sciences company, providing a unique range of analytical testing services to clients across multiple industries, to make life and our environment safer, healthier and more sustainable. From the food you eat, to the water you drink, to the medicines you rely on, Eurofins laboratories work with the biggest companies in the world to ensure the products they supply are safe, their ingredients are authentic and labelling is accurate. The Eurofins network of companies is the global leader in food, environment, pharmaceutical and cosmetic product testing and in agroscience Contract Research Organization services. It is one of the market leaders in certain testing and laboratory services for genomics, discovery pharmacology, forensics, advanced material sciences and in the support of clinical studies, as well as having an emerging global presence in Contract Development and Manufacturing Organizations. It also has a rapidly developing presence in highly specialized and molecular clinical diagnostic testing and in-vitro diagnostic products. In over 30 years, Eurofins has grown from one laboratory in Nantes, France to 58,000 staff across a decentralized and entrepreneurial network of 900 laboratories in over 54 countries. Eurofins companies offer a portfolio of over 200,000 analytical methods to evaluate the safety, identity, composition, authenticity, origin, traceability and purity of biological substances and products. Job Description • Assist in performance of all Quality Assurance functions as outlined in the GLPs and PSL SOPs. Assist the Quality Assurance Director as needed during inspections by EPA, FDA or clients. Prepare records and assemble copies of documents requested by inspectors when advance notice is given and Sponsor and/or Laboratory Director approval is obtained., • Conduct in-process study inspections and general facility inspections in the toxicology and chemistry laboratories as directed., • Audit raw data and proofread report and tables against raw data for accuracy and for typing corrections. Audit final report to verify corrections., • Amend and update Standard Operating Procedures as required using word processing system. File all QAU-related paperwork as directed., • Select intervals for inspection for any regulatory test under the auditor's responsibility or as directed by QA Director, Laboratory Director, or President. Perform such inspections in accordance with the test schedule. When the time for conduct of intervals requiring inspection falls outside of normal working hours, this will be brought to the attention of the Study Director or QA Director in order that a suitable arrangement may be made., • Ability to safely wear a respirator required., • Other duties as assigned.Qualifications, • QA auditors will have experience in a laboratory regulated by FDA/EPA GLP standards. Experience in other quality standards such as cGMP or GCP will also be considered., • Experience with acute toxicology, analytical chemistry, and/or general laboratory procedures is preferred. B.S. degree in biology, toxicology, animal science or related field and/or AALAS certification at the Technician level is also preferred. Experience in computer system validation and electronic data capture is desirable but is not required., • The individual holding this position must be of the highest integrity and have a very strong sense of responsibility. Attention to detail is essential. He/she must be well organized, tactful, be able to work independently and maintain all records, documents, and schedules associated with quality assurance procedures and studies. Communication skills, especially written, are necessary. Proficiency with MSWord and Excel is required. He/she must have a current tetanus vaccination if required to access the vivarium. Additional Information Position is full-time, Monday-Friday 8am-5pm. Candidates within a commutable distance of South Brunswick, NJ are encouraged to apply. Compensation: $22.50-$25.50/hr Excellent full-time benefits including: • Comprehensive medical coverage, dental, and vision options., • Life and disability insurance, • 401(k) with company match, • Paid vacation and holidays Eurofins USA BioPharma Services is a Disabled and Veteran Equal Employment Opportunity employer.

Job DescriptionJob Description Quality Assurance Technician JOB DETAILS Base Pay: $20.00 - $26.00 per hour 2nd Shift: 3:45 pm - 12:15 am DUTIES AND RESPONSIBILITIES • Maintains quality-assurance processes, tests product samples, analyzes/records results data and reports issues that deviate from allowable standards/tolerances. CTQ, CFA, NDF, QC Flag Process, NCR, QPS, 5S, Kaizen Continuous Improvement., • Performs CTQ Audits using SafetyCulture on Samsung Tablet, • Performs CFA Audits using SafetyCulture on Samsung Tablet, • Trains Operators to comply with No Defect Forward (NDF), • Conduct Frame Weld Strength Testing, as required, • Perform all quality testing as required by AAMA specifications, • Perform functional and fabrication checks as required by standard practice, • Report issues deviating from allowable tolerances. Generate NCR using Samsung Tablet., • Use Tablet to perform quality audits and generate Non-Conforming Reports (NCR), • Research and compile data using SafetyCulture and Excel, as requested, • Utilize chop saw and band saw to cut pieces as needed for impact testing and weld strength testing, • Maintain cleanliness, sweep area as needed, • Performs other duties as assignedQualifications, • High School Diploma or equivalent, ability to read and write, use Outlook and Excel on Samsung Tablet, • 1 year of manufacturing experience, • Ability to read a tape measure, calipers, micrometers; knowledge about measurement and test equipment, • Ability to operate computer and knowledge of Microsoft Outlook Email, PowerPoint. Excel and Word., • Must be able to lift 50 pounds regularly and stand for duration of entire shift Additional Information Site Location: 1 Silverline Dr. North Brunswick Township, NJ 08902 For more information please text CBB to ‪‪(732) 314-3003. Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. You can also join one of our Employee Resource Groups which help support our commitment to providing a diverse and inclusive work environment. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. All your information will be kept confidential according to EEO guidelines Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. Cornerstone Building Brands is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, or status as a protected veteran. You can find the Equal Employment Opportunity Poster here. You can also view Your Right to Work Poster here along with This Organizations Participation in E-Verify Poster here. If you'd like to view a copy of the company's affirmative action plan for protected veterans or individuals with disabilities or policy statement, please contact Human Resources at 281-897-7788 or . If you have a disability and you believe that you need a reasonable accommodation in order to search for a job opening or to submit an online application, please contact Human Resources at 281-897-7788 or . This email is used exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only emails received for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. California Consumer Privacy Act (CCPA) of 2018 Must be at least 18 years of age to apply. Notice of Recruitment Fraud We have been made aware of multiple scams whereby unauthorized individuals are using Cornerstone Building Brand's name and logo to solicit potential job-seekers for employment. In some cases, job-seekers are being contacted directly, both by phone and e-mail. In other instances, these unauthorized individuals are placing advertisements for fake positions with both legitimate websites and fabricated ones. These individuals are typically promising high-paying jobs with the requirement that the job-seeker send money to pay for things such as visa applications or processing fees. Please be advised that Cornerstone Building Brands will never ask potential job-seekers for any sort of advance payment or bank account information as part of the recruiting or hiring process.

Job DescriptionBenefits: • Travel Stipend, • 401(k) matching, • Bonus based on performance, • Health insurance Responsibilities • Serve as a liaison between specialty pharmacies, prescribers, and insurance providers to ensure seamless access to prescribed medications and clarify any prescription-related needs., • Monitor market trends and competitor activity to adjust strategies, identify potential growth areas, and implement best practices for marketing and patient access., • Focus on sales/marketing efforts to promote the pharmacys services and secure referrals from providers, contributing to growth in patient enrollment and medication access., • Utilize sales strategies to target and expand market presence, identify new opportunities, and increase awareness of the pharmacys offerings among key stakeholders in the healthcare ecosystem., • Provide exceptional customer service, ensuring that both internal and external customers (patients, providers, pharmacy staff) receive timely and accurate support., • Maintain frequent communication with patients, providers, and pharmacies, clarifying prescription orders and resolving any issues., • Coordinate efforts with providers and specialty pharmacies to improve patient turnaround times and ensure optimal medication access., • Manage and prioritize multiple initiatives, resolving complex cases independently and efficiently, while maintaining a focus on customer satisfaction and outcomes., • Leverage marketing tactics, including digital communication, educational resources, and outreach, to effectively promote the pharmacys services and increase patient engagement.Requirements, • Preferred experience in a health care setting, preferably within a specialty pharmacy environment., • Strong understanding of medication administration processes and patient care standards., • Familiarity with medical terminology related to pharmacy practices, medications and prior authorization process., • Previous experience as a pharmacy technician is highly desirable., • Excellent communication skills with the ability to build rapport with healthcare professionals and patients alike., • Ability to work independently and as part of a collaborative team focused on enhancing patient service., • Commitment to ongoing professional development in the field of specialty pharmacy.Qualifications:, • High School Diploma or GED required, • Associate or bachelors degree preferred, • 1+ years of pharmacy/medical work experience or related field, • Strong customer service, communication, and sales skills, • Proven ability to manage multiple accounts and projects independently, • Understanding of product and payer reimbursement landscapes, • Ability to work collaboratively with a variety of stakeholders, including medical offices, pharmacies, and insurance companies, • Valid drivers license required, • Must be willing and able to drive from office to office within the assigned area (TBD)Preferred Skills:, • Previous experience in sales, marketing, or customer relationship management within the healthcare industry, • Full Time, • On-siteSchedule:, • Monday to Friday, • 40 Hours weeklyPay Rate:, • Bi-weekly, • $22-30 hourly (based on experience)Benefits:, • Paid time Off, • Medical Insurance, • 401k (Matching), • Travel Stipend, • Bonus based on performanceLocation: New Brunswick NJ

Job Description Coherent is a global manufacturing company specializing in lasers, optics, networking, and materials. We are seeking a detail-oriented and hands-on Electronics Technician to join a multi-faceted team supporting production of materials for optical isolators at our Hillsborough, NJ manufacturing facility. The technician will be responsible for assembling, testing, troubleshooting, and maintaining electronic equipment and systems used in the growth, fabrication and testing of optical materials and components in a laboratory production environment. Primary responsibilities • Install as needed, control panels, sensors, PLCs and other electronic components and test instrumentation per blueprints and schematics., • Diagnose system failures to component/circuit level using multimeters, and other appropriate test equipment, • Repair, rework, or replace faulty components, • Conduct functional and acceptance testing on control systems and electrical assemblies per quality specifications., • Perform scheduled maintenance on electronics/control systems (24 V - 480 V range)., • Calibrate instruments and equipment to uphold optimal performance., • Contribute ideas and root‑cause analyses for repeat failures and process enhancements., • Support engineers and operators to resolve equipment issues and improve processes., • Prepare documentation as needed. Maintain repair logs, maintenance records, and test results., • Ensure a safe work environment and cultivate safe behaviors., • Associate's degree or certificate in Electronics Technology, Electrical Engineering, or related field., • Able to read and comprehend electronic schematics and wiring diagrams, • Troubleshooting of electrical circuits: power control circuits, temperature control circuits, switches, Analog and Digital Input/Output modules, network communications, etc., • Use of electrical hand tools: Wire strippers, pliers, crimpers, soldering irons, drills, screw and nut drivers, etc., • Use of electrical test equipment: Volt-Ohm meters, Electrical Power meters (AC/DC), continuity testing, • Electrical assembly: Wiring of instrument panels, pulling and replacing boards/modules, • Ability to document processes, troubleshooting and repair reports Skills - desired • Software skills: LabView, MatLab or Python programming and debugging, • PLC: Familiar with interface Hardware and Software programming, • IT Hardware and Software skills: Networking, Debugging IT issues, work with IT to resolve problems Safety Requirements All employees are required to follow the site EHS procedures and Coherent Corp. Corporate EHS standards. Quality and Environmental Responsibilities Depending on location, this position may be responsible for the execution and maintenance of the ISO 9000, 9001, 14001 and/or other applicable standards that may apply to the relevant roles and responsibilities within the Quality Management System and Environmental Management System. Culture Commitment Ensure adherence to company's values (ICARE) in all aspects of your position at Coherent Corp.: Integrity - Create an Environment of Trust Collaboration - Innovate Through the Sharing of Ideas Accountability - Own the Process and the Outcome Respect - Recognize the Value in Everyone Enthusiasm - Find a Sense of Purpose in Work Coherent Corp. is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. If you need assistance or an accommodation due to a disability, you may contact us at [email protected].About Us Coherent is a global leader in lasers, engineered materials and networking components. We are a vertically integrated manufacturing company that develops innovative products for diversified applications in the industrial, optical communications, military, life sciences, semiconductor equipment, and consumer markets. Coherent provides a comprehensive career development platform within an environment that challenges employees to perform at their best, while rewarding excellence and hard-work through a competitive compensation program. It's an exciting opportunity to work for a company that offers stability, longevity and growth. Come Join Us! Note to recruiters and employment agencies: We will not pay for unsolicited resumes from recruiters and employment agencies unless we have a signed agreement and have required assistance, in writing, for a specific opening.

Job Description Diesel Maintenance Roadside Technician (Mobile Service Unit) Are you an experienced Diesel Technician who enjoys working independently, solving problems on the go, and keeping fleets moving? Gabrielli Truck Leasing and Rental is hiring Mobile Diesel Fleet Maintenance Technicians (Class A & B) to join our growing roadside service team. In this role, you'll work on the road from a fully equipped Mobile Service Vehicle, performing maintenance and repairs wherever our customers need you most. If you're self-motivated, safety-minded, and ready to work for a company that values its team, we want to hear from you! Key Responsibilities • Perform scheduled and unscheduled roadside maintenance and minor repairs (e.g. oil/filter changes, lighting, tires, greasing, minor component replacements)., • Diagnose and troubleshoot issues on commercial trucks and fleet equipment., • Ensure all repairs meet Federal Motor Carrier DOT standards., • Maintain accurate records of all maintenance and repair work using company systems., • Operate service tools and equipment safely and responsibly., • Valid driver’s license and clean Motor Vehicle Record (MVR)., • Minimum 1–3 years of diesel technician or fleet maintenance experience preferred., • Ability to lift up to 70 lbs, kneel, crawl, and work in various physical conditions., • Must be comfortable working alone in a mobile setting with limited supervision., • Basic computer skills (Microsoft Office, internet browser)., • Must own tools necessary to perform mobile repair and maintenance work., • High School Diploma or GED required., • Must pass background check and drug screening., • CDL License and/or NYS Heavy Duty Inspector’s License a plus (not required, but willingness to obtain is necessary)., • Full-Time, Year-Round Work, • Steady Pay with Overtime Opportunities, • Medical, Dental, and 401(k) Benefits, • Paid Vacation & Holidays, • Ongoing Training and Advancement Opportunities, • Work with a supportive team in a growing company Gabrielli Truck Sales is an Equal Opportunity Employer. We value a diverse and inclusive working atmosphere. In furtherance of our culture, all qualified applicants will receive consideration for employment without regard to pregnancy, race, national origin, gender, age, religion, disability, sexual orientation, veteran status, marital status or any other characteristics protected by law. Gabrielli Truck Sales provides reasonable accommodations for employees and applicants with disabilities or pregnant consistent with applicable law. If you need a reasonable accommodation during the application process, please let us know. Benefits: • Medical and Dental plan, • Paid Holidays, • Paid vacation and sick/personal time, • 401k with an employer match, • EMPLOYER Paid Life insurance benefit, • Gym Reimbursement program

Job Description Are you looking for a new challenge in your career? Tired of working the same boring job? We’ve got just the change you're looking for, something new, different career path, and stability! Gerhart is seeking a CDL Field Technician with knowledge of heavy capacity weighing equipment to join our team. In this role technicians will specialize in operating a Test Truck/Rig to perform services on weighing equipment in the field. The ideal candidate should have a general mechanical or electrical background, be a self-starter with a solid customer oriented approach. Responsibilities: • Operation of company Test Truck and/or Rig type CDL vehicle to perform a variety of field services including: installation, calibration, testing, and maintenance of customer equipment, often outdoors, • Ability to mechanically and electrically troubleshoot, identify, and diagnose malfunctions and repair weighing equipment related to Heavy Capacity, • Capability of leading projects and being a resource to peers while on job sites, • Comfortable working in all work environments, outdoor industrial settings includes dust, dirt, extreme temps both hot & cold, • Able to work overtime as needed to complete projects within defined deadlines, • Hold a Class B CDL (drivers license), • Familiarity with industrial service tools, and welding experience desirable, • Basic understanding of 120VAC wiring and/or DC signal wiring, • Strong problem solving & critical thinking skills, • Offer exceptional customer service and communicate effectively We are a diverse company providing systems integrations, field service and turn-key installations of Process Automation Systems, Industrial Weighing Equipment, and Process Instrumentation. We are seeking highly motivated candidates to join our team of talented employees and contribute to our continued success and growth. Gerhart is a well-established company with over 90 years’ experience in the industry! Join our company where our people and excellence are essential to our culture. Gerhart Benefits package includes: • Benefits package: various medical options including 100% employer covered benefits, dental, and vision plans, • Paid Time off, • Life Insurance, • Matching 401k

Job Description Overview: We are seeking skilled Low Voltage Technicians to join our team. As a Low Voltage Technician, you will be responsible for installing, maintaining, and troubleshooting low voltage systems in residential, commercial, and industrial settings. This role requires a meticulous attention to detail, strong technical skills, and a commitment to ensuring the safety and reliability of low voltage systems. Responsibilities: • Installation:, • Install low voltage systems including but not limited to security systems, access control systems, CCTV systems, fire alarm systems, and audiovisual systems., • Mount and configure equipment such as cameras, sensors, control panels, and wiring according to specifications and building codes., • Collaborate with other tradespeople and contractors to ensure seamless integration of low voltage systems with overall building infrastructure., • Maintenance and Repair:, • Conduct routine inspections of low voltage systems to identify and address any issues or potential failures., • Perform scheduled maintenance tasks such as testing circuits, replacing components, and updating firmware/software as needed., • Respond promptly to service calls and troubleshoot system malfunctions to restore functionality., • Documentation and Reporting:, • Maintain accurate records of all installations, maintenance activities, and repairs performed., • Generate detailed reports outlining work completed, parts used, and any recommendations for future improvements., • Provide clear and concise documentation to clients and stakeholders regarding system functionality and maintenance procedures., • Quality Assurance:, • Ensure all work meets industry standards, building codes, and safety regulations., • Conduct quality checks on installations to verify proper functionality and adherence to specifications., • Identify opportunities for process improvements and suggest enhancements to increase efficiency and reliability., • Customer Service:, • Interact professionally with clients, project managers, and other stakeholders to address inquiries, provide technical support, and offer guidance on system operation., • Educate end-users on the proper use and maintenance of low voltage systems to optimize performance and longevity., • High school diploma or equivalent; technical certification or vocational training in electrical or low voltage systems preferred., • Proven experience as a Low Voltage Technician or similar role, with a strong understanding of low voltage systems and components., • Proficiency in reading and interpreting technical schematics, wiring diagrams, and installation manuals., • Familiarity with industry standards and regulations governing low voltage installations., • Ability to work independently with minimal supervision and as part of a team in a fast-paced environment., • Excellent problem-solving skills and attention to detail, with a focus on delivering accurate and reliable solutions., • Effective communication skills, both verbal and written, with the ability to interact professionally with clients and colleagues., • Valid driver's license and clean driving record; willingness to travel to job sites as needed., • Ability to lift and carry heavy equipment and materials (up to 50 lbs)., • Comfort working at heights and in confined spaces, as required by job site conditions., • Manual dexterity and hand-eye coordination for precise installation and wiring tasks., • Flexibility to work occasional evenings, weekends, or overtime to accommodate project deadlines and service calls.

Job DescriptionSalary: Per Union CBA Who We Are Binsky is a leader in world-class mechanical construction. Dedicated service to our clients has elevated us as the premier mechanical contractor for projects of all sizes and scopes. Innovation is the key at Binsky and along with our creative processes, we are always on the cutting edge of technology. Recognized as one of the most respected mechanical contractors in New Jersey and Pennsylvania, Binsky delivers high quality workmanship on projects from large traditional construction to commercial HVAC, plumbing, and service. Building incredible projects requires exceptional people. We are seeking a Sales Account Manager for our Integrated Services Division. Why We Need You! We need talented individuals, like you, who care about the company and our customers, and can help us continue to grow and succeed! The Role Plumbing Service Technicians repair and maintain heating and cooling equipment in commercial, and industrial settings. In this role, you will examine faulty equipment, conducting tests with a variety of devices to locate, diagnose, and isolate issues that interrupt performance or create hazards. In many cases, you will follow regular maintenance schedules to keep systems working reliably, but also need to conduct emergency service to make rapid repairs to customer systems. This role requires a balance of technical and mechanical skills, knowledge about plumbing systems and components, and customer service in order to successfully troubleshoot Plumbing issues and make necessary repairs. This full-time position may also require some travel, as these technicians work on-site. Responsibilities MaintainPlumbingSystems • Day-to-day duties involve performing regular or routine maintenance tasks on plumbing systems. These tasks can include repairs plumbing systems and fixtures, installation of rough plumbing and plumbing fixtures, installation of water heaters, troubleshooting sewage ejector pumps, installation of gas piping, installation of grease traps, clearing drains in residential or commercial locations. A Plumbing Service Technician may also perform seasonal maintenance on buildings system functions. Troubleshoot Plumbing Equipment • Troubleshooting plumbingsystems and system elements is another major duty. Working from issues reported by customers or problems that arise during routine maintenance and system testing, the Plumbing Service Technician attempts to determine which components are at fault. These technicians then determine whether the system or element can be repaired or if it needs to be replaced. Repair and Replace Systems • Perform a variety of repairs for plumbing systems, ranging from simple parts replacements to complex issues that require a complete replacement of the plumbing system. If an entire system needs to be replaced, the Plumbing Service Technician needs to install and test all new components. For simple repairs, they may replace one or more parts and conduct new tests to ensure that the repairs have restored the system to working order. Consult with Customers • Frequently consult directly with customers, both to gather information about performance issues and to provide cost and time estimates related to repair and maintenance tasks. Throughout the repair process, you may also provide the customer with updates, answer questions about the system, and provide advice on operations and maintenance. Ensure Safe Repair and Operations • While diagnosing and repairing plumbing systems, also maintain safe operations and follow best practices for safely working with the system. Maintain Customer and Service Records • Maintain documentation related to customer systems and the services they perform. This helps to ensure that maintenance is performed according to schedule, and it also provides data related to ongoing or recurring issues with the system. Plumbing Service Technicians may also prepare documents for customers, including troubleshooting steps they can take between regular maintenance. Qualifications / Skills: • Have experience conducting routine and emergency repairs to plumbing systems while interacting directly with customers, • Have a strong grasp of best practices and principles related to plumbing system installation, maintenance, and operations, • Diagnose and resolve a variety of performance issues,using excellent troubleshooting and problem-solving skills, • Must haveexperience with providing outstanding customer service and answering customer questions, • Effective communication is also key in this role,you will need to communicate with customers and with other trade professionals Union Card • Local 24 preferred, • Active and in good standing What We Offer Binsky values the well-being of its employees and offers competitive wages and a range of benefits: • 8 paid holidays per year, • Paid Time Off Binsky is an EOE. This job description does not necessarily represent an exhaustive list of responsibilities, skills, duties, requirements, efforts or working conditions associated with the job. While this is intended to be an accurate reflection of the job, management reserves the right to revise the job or require that other different tasks are performed as circumstances change.

Job Description Pharmacy Technician About the Role: Join our team as a Patient Access Pharmacy Technician and be the vital link between patients and pharmacists. In this role, you'll create patient profiles, collaborate with pharmacists to ensure seamless care, and provide support with a caring and empathetic attitude. Responsibilities: • Create and maintain accurate patient profiles, • Communicate and collaborate effectively with pharmacists to ensure proper care, • Assist in addressing patient inquiries and needs with compassion, • Uphold patient confidentiality and ensure compliance with regulations, • Opportunities for professional growth and development, • Supportive and team-focused work environment, • Certified Pharmacy Technician and must have New Jersey license, • Strong organizational skills and attention to detail, • Excellent communication and teamwork abilities, • A caring and compassionate attitude toward patients Full time: 40 hours weekly OT available but not required Pay and Benefits The pay range for this position is $22.00 - $22.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Somerset,NJ. Application Deadline This position is anticipated to close on Sep 24, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email for other accommodation options.

Job Description Pharmacy Technician About the Role: Join our team as a Patient Access Pharmacy Technician and be the vital link between patients and pharmacists. In this role, you'll create patient profiles, collaborate with pharmacists to ensure seamless care, and provide support with a caring and empathetic attitude. Responsibilities: • Create and maintain accurate patient profiles, • Communicate and collaborate effectively with pharmacists to ensure proper care, • Assist in addressing patient inquiries and needs with compassion, • Uphold patient confidentiality and ensure compliance with regulations, • Opportunities for professional growth and development, • Supportive and team-focused work environment, • Certified Pharmacy Technician and must have New Jersey license, • Strong organizational skills and attention to detail, • Excellent communication and teamwork abilities, • A caring and compassionate attitude toward patients Full time: 40 hours weekly OT available but not required Pay and Benefits The pay range for this position is $22.00 - $22.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Highland Park,NJ. Application Deadline This position is anticipated to close on Sep 24, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email for other accommodation options.

Job Description Title: Behavior Technician (Naturalistic, Play-Based ABA) Cortica is looking for dedicated, compassionate Behavior Technicians to join our growing team and help us design and deliver life-changing care for children with neurodevelopmental differences. At Cortica, we don't just offer jobs; we offer careers with purpose, growth, and support. What We Offer: • Pay Range: $23.64 to $31.72 per hour, based on experience and education., • Fully Paid Training & Certification: Kickstart your career with Cortica with a comprehensive 3-week, in-person orientation that includes hands-on training, a Board-Certified Autism Technician (BCAT) exam review, and full coverage of your exam fees. We're invested in your success from day one., • Referral Bonus: Earn between $250-$500 for successful referrals., • Cell Phone Stipend: Stay connected with support from us., • Paid Drive Time and Mileage Reimbursement: We value your time on the road and include toll reimbursement in select areas., • 401(k) with Company Matching: Secure your future with our generous plan., • Ongoing Professional Development: Access continuous training through in-person and online opportunities., • Supportive Environment: Collaborate with and receive expert coaching from Lead BTs, ABA Assistant Supervisors, and ABA Supervisors who champion your growth., • Career Advancement: Opportunities to grow your career by advancing to a BCBA role, ascending the Behavior Technician Clinical Ladder, or serving in a corporate support role., • Learn from Experts in Other Fields: Partner with BCBAs and experts in speech-language therapy, music therapy, occupational therapy, and physical therapy as well as counselors, pediatricians, neurologists, and nurse practitioners. Your Impact & Responsibilities: • Provide 1:1 and group behavior-analytic services to children with autism and other neurodevelopmental differences., • Implement positive behavior strategies developed with your BCBA., • Use evidence-based practices to create meaningful progress for families., • Document session data to track and support treatment goals., • Collaborate closely with families and supervisors to build supportive environments., • Follow Cortica's crisis protocols, including de-escalation and mandated reporting. Who We're Looking For: • Experience working with children (experience with autism is a plus!)., • High School or equivalent, bachelor's or master's degree., • Willingness to obtain your BCAT credential within 90 days of your start date (We provide all training!)., • Ability to consistently travel between client sites within a 30–40-minute radius using reliable transportation., • Tech-savvy with EMR systems and Microsoft Office tools. Our Inclusive Culture: • Transdisciplinary Approach: Collaborate with experts in various fields to care for the whole child., • Collaborative Process: Develop individualized care plans alongside families and clinicians., • Strength-Based, Neurodiversity-Affirming Model: Focus on building on each child's unique strengths rather than emphasizing deficits. Join Cortica's team and make a meaningful impact by applying a strength-based, neurodiversity-affirming ABA therapy model. Help children recognize and build on their unique abilities, fostering positive relationships and skills that translate across home, school, and community settings. Be part of a progressive approach that combines neuroscience and developmental models to empower each child to thrive. Ready to make a difference? Apply today! Equal Opportunity Employer (EOE). For more details, visit the full job description here. Behavioral Health Center of Excellence (BHCOE) Accredited 2024 | America's Greatest Midsize Workplaces 2025 Newsweek | Great Place to Work Certified 2025 | Glassdoor 4.3 Rating 2025 | Indeed 4.1 Rating 2025 Privacy Notice HYPERLINK " is committed to protecting your personal information in compliance with applicable federal and state laws. Please review our Privacy Notice to understand how your data is collected, used, and protected. Driving Requirement This position requires the successful completion of a post-offer background check and a motor vehicle report review. E-Verify Participation This employer participates in E-Verify. Click here to view the E-Verify Poster and your Right to Work. Este empleador participa en E-Verify. Este empleador participa en E-Verify. Haga clic aquí para ver el cartel de E-Verify y su derecho a trabajar. #LI-JC1#WarrenBICareers

Job Description Title: Behavior Technician (Naturalistic, Play-Based ABA) Cortica is looking for dedicated, compassionate Behavior Technicians to join our growing team and help us design and deliver life-changing care for children with neurodevelopmental differences. At Cortica, we don't just offer jobs; we offer careers with purpose, growth, and support. What We Offer: • Pay Range: $23.64 to $31.72 per hour, based on experience and education., • Fully Paid Training & Certification: Kickstart your career with Cortica with a comprehensive 3-week, in-person orientation that includes hands-on training, a Board-Certified Autism Technician (BCAT) exam review, and full coverage of your exam fees. We're invested in your success from day one., • Referral Bonus: Earn between $250-$500 for successful referrals., • Cell Phone Stipend: Stay connected with support from us., • Paid Drive Time and Mileage Reimbursement: We value your time on the road and include toll reimbursement in select areas., • 401(k) with Company Matching: Secure your future with our generous plan., • Ongoing Professional Development: Access continuous training through in-person and online opportunities., • Supportive Environment: Collaborate with and receive expert coaching from Lead BTs, ABA Assistant Supervisors, and ABA Supervisors who champion your growth., • Career Advancement: Opportunities to grow your career by advancing to a BCBA role, ascending the Behavior Technician Clinical Ladder, or serving in a corporate support role., • Learn from Experts in Other Fields: Partner with BCBAs and experts in speech-language therapy, music therapy, occupational therapy, and physical therapy as well as counselors, pediatricians, neurologists, and nurse practitioners. Your Impact & Responsibilities: • Provide 1:1 and group behavior-analytic services to children with autism and other neurodevelopmental differences., • Implement positive behavior strategies developed with your BCBA., • Use evidence-based practices to create meaningful progress for families., • Document session data to track and support treatment goals., • Collaborate closely with families and supervisors to build supportive environments., • Follow Cortica's crisis protocols, including de-escalation and mandated reporting. Who We're Looking For: • Experience working with children (experience with autism is a plus!)., • High School or equivalent, bachelor's or master's degree., • Willingness to obtain your BCAT credential within 90 days of your start date (We provide all training!)., • Ability to consistently travel between client sites within a 30–40-minute radius using reliable transportation., • Tech-savvy with EMR systems and Microsoft Office tools. Our Inclusive Culture: • Transdisciplinary Approach: Collaborate with experts in various fields to care for the whole child., • Collaborative Process: Develop individualized care plans alongside families and clinicians., • Strength-Based, Neurodiversity-Affirming Model: Focus on building on each child's unique strengths rather than emphasizing deficits. Join Cortica's team and make a meaningful impact by applying a strength-based, neurodiversity-affirming ABA therapy model. Help children recognize and build on their unique abilities, fostering positive relationships and skills that translate across home, school, and community settings. Be part of a progressive approach that combines neuroscience and developmental models to empower each child to thrive. Ready to make a difference? Apply today! Equal Opportunity Employer (EOE). For more details, visit the full job description here. Behavioral Health Center of Excellence (BHCOE) Accredited 2024 | America's Greatest Midsize Workplaces 2025 Newsweek | Great Place to Work Certified 2025 | Glassdoor 4.3 Rating 2025 | Indeed 4.1 Rating 2025 Privacy Notice HYPERLINK " is committed to protecting your personal information in compliance with applicable federal and state laws. Please review our Privacy Notice to understand how your data is collected, used, and protected. Driving Requirement This position requires the successful completion of a post-offer background check and a motor vehicle report review. E-Verify Participation This employer participates in E-Verify. Click here to view the E-Verify Poster and your Right to Work. Este empleador participa en E-Verify. Este empleador participa en E-Verify. Haga clic aquí para ver el cartel de E-Verify y su derecho a trabajar. #WarrenBICareers#LI-JC1

Job Description Applied ABA Job Type: Part-Time / Full-Time About Us Applied ABA Therapy, is a rapidly growing healthcare company dedicated to providing innovative and effective treatment for children with autism and other neurodevelopmental differences. Our mission is to deliver life-changing care—one child, one family, one community at a time. We foster a collaborative, inclusive, and growth-oriented culture, celebrating diversity and ensuring equal opportunities for all. Join our team to make a meaningful impact in the lives of children and families! Job Summary As a Registered Behavior Technician (RBT) or Behavior Technician (BT), you will work one-on-one with children with autism spectrum disorder, implementing individualized treatment plans designed by Board-Certified Behavior Analysts (BCBAs). You will use evidence-based behavior-analytic strategies to help children acquire new skills, improve communication and socialization, and reduce challenging behaviors in a fun, engaging, and supportive environment. This role offers comprehensive training, professional development, and opportunities for career advancement. What You’ll Do • Provide direct behavior-analytic services in a 1:1 group setting, delivering therapy in homes and daycare environments to meet each child’s unique needs., • Implement positive behavior strategies, including antecedent and consequence (reinforcement) interventions, as outlined in individualized treatment plans developed by BCBAs., • Collect and record precise behavioral data (e.g., A-B-C, count, frequency, duration, latency, inter-response time, event, and interval-based recording) during sessions to track progress and inform clinical decisions., • Build and maintain therapeutic relationships by establishing rapport with clients and their families, fostering trust and engagement in the treatment process., • Collaborate closely with families, BCBAs, and multidisciplinary team members to ensure consistent application of behavior management techniques across all settings without disruption to the environment., • Assist with individualized assessment procedures, such as conducting preference assessments and functional analyses, to identify motivators and tailor interventions., • Document session notes in real-time, ensuring accurate and timely completion of all required documentation, including data collection and progress reports., • Educate parents/guardians on reinforcement strategies, intervention techniques, and behavior management tools when requested to promote generalization of skills outside therapy sessions., • Promote safe and socially acceptable replacement behaviors to build a repertoire of communication, social interaction, problem-solving, and daily living skills., • Ensure proper implementation of behavior programs by training and retraining staff as needed, routinely communicating with team members to maintain fidelity of interventions., • Engage clients in age-appropriate leisure activities (e.g., games, crafts) to keep them active and motivated during therapy times, enhancing their overall experience., • Review updates for clients, including new programs or scheduled sessions, and prepare to implement these changes effectively., • Monitor and evaluate client progress using behavior-analytic methods, identifying barriers to success and making data-driven recommendations to supervisors and BCBAs., • Participate in ongoing training and professional development to stay current with best practices in applied behavior analysis and enhance your clinical skills., • You have experience working with children, preferably those with autism or intellectual disabilities., • You possess a high school diploma (bachelor’s degree in a human services field preferred; relevant experience considered in lieu of degree; current undergraduate students welcome)., • You are a Registered Behavior Technician (RBT) or willing to obtain RBT certification., • You are available to work part-time or full-time, Monday–Friday, between 8:00 AM–8:00 PM., • You have a valid New Jersey license, reliable transportation, and are willing to commute within a 30-minute radius., • You are skilled in using software, including electronic medical record systems and Microsoft Office., • You have strong communication skills, attention to detail, and the ability to establish trust and rapport quickly., • You can lift up to 50 pounds, react quickly to client movements, and spend 75% of the day walking, standing, bending, kneeling, squatting, or sitting on the floor., • You are able to pass a criminal background check and hold current CPR/First Aid certification., • Make a Difference: Transform the lives of children with autism and their families through meaningful, science-based interventions., • Comprehensive Training: RBT training program to become a certified behavior technician and start your career in Applied Behavior Analysis (ABA)., • Mentorship: For graduate students, work one-on-one with a dedicated BCBA mentor to support your studies and build up experience hours., • Competitive Compensation:, • Base pay: $20.00 - $30.00 hour, based on experience, education, and location., • Occasionally stand, walk, sit, climb, balance, kneel, crouch, or crawl., • Lift and/or move up to 50 pounds. Applied ABA Therapy is proud to be an equal opportunity employer. We do not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, veteran status, or any other characteristic protected by law. Note: This job description is not exhaustive and duties may vary as needed. Applied ABA Therapy is committed to protecting your personal information in compliance with federal and state laws. Review our Privacy Notice for details. Job Types: Full-time, Part-time, Contract, Temporary Pay: $20.00 - $30.00 per hour Benefits: • 4 hour shift, • 8 hour shift, • After school, • Day shift, • Monday to Friday Powered by JazzHR HnexmiGabs

Job Description HVAC Technician -NO ON-CALL - CHOOSE YOUR SHIFT- U*p to $32 / *hour base ($48 / hour with incentive pay) + 10K Sign On Bonus!! HVAC Technician - Are you an HVAC Service expert who is passionate about problem solving and customer service? Looking to accelerate your career (and income!) with an organization who values its people? Come see why so many of our team members and customers recommend Gold Medal! Our HVAC Service experts do not work on-call shifts and earn $48+/hr with bonuses and incentives! Who are we? We are Gold Medal. For over 30 years, we've been the trusted name in plumbing, heating, and air conditioning, offering an unmatched level of customer service and technical expertise. Behind that outstanding customer service and technical expertise sits our people. Our employees are the core of our business and our people-first culture ensures that we can deliver on the Gold Medal guarantee with each and every employee and customer we service. We believe that happy employees = happy customers! What our HVAC Technicians do? Our technicians go into clients' homes to help solve their HVAC problems. They troubleshoot, diagnose, and repair their residential heating and cooling systems, as well as complete assigned preventative maintenance. What we offer? Competitive Compensation: • With our tools, resources and training, our technicians are able to make over $48 per hour, • We offer a very competitive base salary and bonus program that rewards you for your hard work and customer service! Our best technicians make over $100,000.00 per year, • Top candidates will be eligible for a sign on bonus of $5000!, • 2 weeks Paid Time Off for all new hires, • Company provided tools and equipment Consistency: • We offer consistent and reliable full-time year round work., • Flexible scheduling: Multiple shift opportunities, flexible days of the week, 4-10's available, • Robust Paid Training & Professional Development Path - 150 hours of training per year!, • Opportunity to grow - We love to promote from within! Most of our leaders started in the truck!, • Qualified technicians will be sponsored for Journeyman license and NATE certification., • Health benefits including Medical, Dental, Vision, and Life Insurance, • Access to Flexible Spending Accounts for Healthcare or Dependent Care Expenses, • Short Term Disability, • Long-Term Disability, • Wellness Reimbursement Program, • Employee Assistance Program that offers services such as free counseling services, will preparation, and other benefits, • Company-paid PTO and Paid Holidays, • 401(k) retirement plan with company-matching contributions, • Experience as an HVAC Service Technician, • Relevant licenses and certifications, • A valid driver's license and a clean driving record, • Ability to pass a background check and drug test, • Clean and neat appearance, • Strong customer service and communication skills We understand your time is valuable and that is why we have a very quick and easy application process. If you feel that you would be right for this HVAC Service Technician position, please fill out our initial 3-minute, mobile-friendly application so that we can review your information. We look forward to meeting you! Job Posted by ApplicantPro

Job Description HVAC Install Technician - CHOOSE YOUR SHIFT- U*p to $40 / *hour base ($60 / hour with incentive pay) - No On-Call or Mandatory Weekends + up to 10K Sign On Bonus!! Are you HVAC Install expert who is passionate about problem solving and customer service? Looking to accelerate your career (and income!) with an organization who values its people? Come see why so many of our team members and customers recommend Horizon! Who are we? We are Gold Medal Services. For over 30 years, we've been the trusted name in plumbing, heating, and air conditioning, offering an unmatched level of customer service and technical expertise. Behind that outstanding customer service and technical expertise sits our people. Our employees are the core of our business and our people-first culture ensures that we can deliver on the Gold Medal guarantee with each and every employee and customer we service. We believe that happy employees = happy customers! What our HVAC Install Technicians do? Our technicians go into clients' homes to install new residential heating and cooling systems. What we offer? Competitive Compensation: • With our tools, resources and training, our technicians are able to make up to $100,000.00 per year - we offer a very competitive base salary and bonus program that rewards you for your hard work and customer service!, • We offer consistent and reliable full-time year round, • Flexible scheduling - Everything from a 9-5 to 4-10's with flexible days of the week. Professional and Personal Growth: • Robust Paid Training & Professional Development Path - 150 hours of training per year!, • Opportunity to grow - We love to promote from within! Most of our leaders started in the truck!, • Qualified technicians will be sponsored for Journeyman license and NATE certification., • Health benefits including Medical, Dental, Vision, and Life Insurance, • Access to Flexible Spending Accounts for Healthcare or Dependent Care Expenses, • Short Term Disability, • Long-Term Disability, • Wellness Reimbursement Program, • Employee Assistance Program that offers services such as free counseling services, will preparation, and other benefits, • Company-paid PTO and Paid Holidays, • 401(k) retirement plan with company-matching contributions, • Experience as an HVAC Install Technician, • Relevant licenses and certifications, • A valid driver's license and a clean driving record, • Ability to pass a background check and drug test, • Clean and neat appearance, • Strong customer service and communication skills, • Hard-working and motivated Are you ready to join our team? We understand your time is valuable and that is why we have a very quick and easy application process. If you feel that you would be right for this HVAC Install Technician position, please fill out our initial 3-minute, mobile-friendly application so that we can review your information. We look forward to meeting you! Job Posted by ApplicantPro