Trabajos shop hand en Plainview, New YorkCrear alertas

Job DescriptionBenefits: • Excellent work environment, • Competitive salary, • Vacation Days, • Perform vehicle inspections pre and post-detailing, • Clean the interiors and exteriors of vehicles using approved products and procedures, • Relocate vehicles to various locations within the body shop., • Moving vehicles in and out of the shop.Qualifications, • 5 Years Minimum of previous experience as a Car Detailer is required, • Valid Drivers License is required, • High level of attention to detail, • Strong interpersonal communication skills, • Ability to meet the physical requirements of the position, including extended periods of walking, bending, and standing, • Strict adherence to company policies and service standards, • Speak, read, and write EnglishPolisherResponsibilities, • Polish, buff, and restore the exterior finish of vehicles, • Remove scratches, blemishes, and dirt, • Apply waxes, polishes, dyes, and reconditioners, • Prepare surfaces for buffing by sanding, cleaning, and masking, • Match factory paint textures, • Inspect vehicles for damage, • Follow safety proceduresQualifications, • 5 years or more experience is required, • Valid drivers license is required, • Ability to speak, read and write English is a must, • Confidence using tools and materials, • Attention to detail, • Ability to perform physical activities like lifting, climbing, and balancing, • Ability to use hand toolsAdditional tasks, • Apply ceramic coats, • Repair or replace machine parts, • Fit boot spoilers, mud flaps, or side skirts, • Disassemble and reassemble machines or equipment, • Collect and test cleaning solutions or vapors

Job Description Automotive Technician / Mechanic (A, B, and C Level) – Job Description Automotive Technicians inspect, diagnose, repair, and maintain vehicles according to manufacturer standards. Dealerships and repair facilities often categorize technicians into A, B, and C levels based on experience, technical skill, and ability to diagnose complex issues. Technicians work with service advisors and other technicians to ensure vehicles are repaired correctly and efficiently while maintaining high customer satisfaction. A-Level Technician (Master / Diagnostic Technician) Overview The A-Level Technician is the most experienced mechanic in the shop. They perform advanced diagnostics and major mechanical repairs and often mentor other technicians. Responsibilities • Diagnose complex mechanical and electrical issues., • Perform major repairs including engine, transmission, driveline, and electrical systems., • Perform advanced diagnostics using manufacturer scan tools., • Repair hybrid, EV, and advanced vehicle systems when applicable., • Lead troubleshooting efforts for difficult repair cases., • Train and mentor B and C technicians., • 5+ years of professional automotive repair experience., • ASE Master Certification or manufacturer certification preferred., • Advanced diagnostic and electrical troubleshooting skills., • Ability to perform heavy-line repairs (engine and transmission). B-Level Technician (Experienced Line Technician) Overview The B-Level Technician is a skilled mechanic who can handle most mechanical repairs and diagnostics but may still rely on A-Level technicians for complex issues. Responsibilities • Diagnose common mechanical and electrical problems., • Perform brake, suspension, steering, cooling, and drivability repairs., • Complete vehicle inspections and recommend needed repairs., • Use diagnostic tools to identify faults., • Perform maintenance services and mid-level repairs., • Assist A-Level technicians with complex repairs. Typical Requirements • 2–5 years of automotive technician experience., • Some ASE certifications preferred. C-Level Technician (Entry-Level / Apprentice) Overview The C-Level Technician is an entry-level mechanic or recent automotive school graduate. They perform basic maintenance and assist more experienced technicians while gaining experience. Responsibilities • Perform routine maintenance such as:, • Oil and filter changes, • Tire rotations, • Battery replacement, • Fluid services, • Conduct multi-point vehicle inspections., • Assist with brake services and minor repairs., • Maintain shop cleanliness and organization., • Automotive technical school training or 0–2 years of experience., • Basic knowledge of automotive systems., • Willingness to learn and complete training programs. Work Environment • Automotive dealership or repair shop, • Combination of diagnostic work, mechanical repairs, and maintenance, • Use of hand tools, power tools, and computerized diagnostic equipment Automotive technicians diagnose vehicle problems, perform maintenance, and repair mechanical or electrical systems to keep vehicles operating safely and efficiently.

Job Description Summary: Parabit Systems, a well-established and rapidly expanding company in the security and self-service equipment industries, is currently seeking an experienced, motivated, innovative, problem solver with a comprehensive understanding of all facets of Metal Work and Finishing. Candidates must have a minimum of three (3) years' experience in the field. The applicant must be proficient in fabricating top quality finished products. Applicants must be able to read and review shop drawings. A strong work ethic and personal commitment to quality and service are essential for this position. Adhering to deadlines and time management skills are essential. We are looking for a candidate with excellent communication skills that is highly organized, reliable, trustworthily, and efficacy driven. Primary Responsibilities: • Job duties include grinding, sanding, and filling uneven surfaces, polishing and coating metal, and etching decorative details., • Removes dents, scratches, and defects from metal surfaces using stroke sanders, hand power tools and pneumatic tools., • Operate a variety of machines for metal finishing., • Follow safety instructions including P.P.E. Fill out paperwork to accurately track traceability on all parts., • Ability to read and review fabrication drawings and specifications., • Consistently work within tight tolerances., • Manufacture high quality products., • Very knowledgeable with sanding, preparation, finishing, application, polishing, repair and manual machining techniques., • Exceptionally knowledgeable in various millwork products such as laminates, solid surfacing, painted finishes, and stainless steel., • Must adhere to established procedures/processes/policies., • Self-Motivated, with a strong work ethic. Education/Experience: • High school diploma., • 3 years' experience in metalwork., • Painting or Powder-Coating knowledge a big plus., • Able to work as a team and motivate employees. Parabit Systems is focused on growth and growing leaders. Parabit Systems is an equal opportunity employer, offering a great work environment, and challenging career opportunities. Please email your resume to . Benefits: • Medical, • Dental, • Vision, • 401K, • Group Life, • PTO All employment candidates must pass: a NON-DOT Drug screening, Criminal and Credit Background Check and a Driver License Check prior to employment.

Job Description WE OFFER GREAT BENEFITS: • Company Profit Sharing Bonus Plan, • Generous SPIFF Plans, • Major Medical, Dental, Vision Insurance, Short Term Disability & Prescription Coverage for Eligible Employees, • Company Paid Life Insurance, • Flexible Spending Account “FSA”, • Dependent Care FSA, • Generous Vacation Time, • Personal Time, • 6 Paid Holidays, • 401(k) Plan, • Company Contribution to Retirement Savings Plan, • Company Paid Life Insurance, • Generous employee discount programs, • Paid Training, • Flexible Work Schedule, • Direct Deposit—paid weekly for hourly positions Position Summary: Managing Partners control the day-to-day operations of their store, including but not limited to the direction of store operations, finances, hiring, budgeting, supply place, and generating new business. Our Managing Partners are ultimately responsible for achieving bottom line profit quota goals. What are the expectations of a Managing Partner? 1. Achieve your Financial Results – you are expected to hit your store’s bottom line profit quota. • Store Sales Quota Dashboards – are you hitting quota on all sales channels and are you actively engaging your staff in these income streams., • TSP-new accounts, door knocks, phone calls., • Services, including Warranty and Delivery programs, • All other Dashboard Critical Categories of Classes, • Expenses-make conscious economic decision based off your sales volume, • Payroll, • Occupancy, • Advertising, • General Expenses, • Other Income-hit quotas on other income streams, • Acehardware.com, • Non-Retail Income 2. Community Insurgency– Are you making your store known in the community • Social media, • Be active on Facebook store page, • Consistently getting new followers to hit quota., • Community and In- store events 3. 20/20 Vision Growth Plan Progress Report • Achieve your stores “key performance drivers”, • Store financials results and hitting quotas on all KPI’s., • Drive Sales in all sales channels including but not limited to DIY, Business-to-business, acehardware.com, non-retail income, services, and other key categories., • Assures the training, development, and performance of their team’s staff to retain a motivated, professional workforce that achieves their career objectives., • Recruits and recommends qualified employees for their team’s staff positions., • Provides product feedback to the management, including making recommendations regarding new items to carry or those that should discontinued., • Consults with leadership on the development of their team's strategy., • Liaises with regions to ensure timely and efficient communication flow., • Consults with the business to effectively design and streamline applicable processes within the organization., • Keeps up-to-date on external best practices and relevant changes to their field/area; communicates updates to leadership., • Ensures a safe environment for employees, customers and vendors by identifying and rectifying hazards, ensuring proper ergonomics and maintaining store equipment in proper working order., • Takes inventory counts according to guidelines and assists management with maintaining proper stock levels through appropriate product ordering and CGO-S parameter maintenance., • Ensures proper store signage is always maintained., • Ensures store personnel comply with all established company policies and procedures., • Identifies cost-saving opportunities and potential process improvements., • Serves as the primary link between their team’s staff and leadership to assure understanding of company goals, objectives, and opportunities for improvement., • Ensure they are staying involved in their Community by joining local Chambers of Commerce and participating in local fairs, charities, and other community events., • Strong leadership skills, • Ability to work in a fast-paced, demanding environment, • Excellent organization skills, • Strong written and verbal skills, • Must have reliable transportation, • Must be willing to work in a team, as well as independently, • Sense of urgency and follow through are essential, • Walking; Frequent; Flat surfaces from point to point, • Standing; Constant; All work performed on feet, • Sitting; None, • Stooping; Frequent; To pick up cartons at floor level, • Reaching; Frequent; To a height of 6 feet, • Lifting; Frequent; Up to 60 lbs., up to 500 repetitions per hour to a height of 4 feet (top of register); must be able to lift up to 25 pounds comfortably, • Hand Dexterity; Frequent; Must be able to use at least one hand to operate register and complete paperwork, • Pushing / Pulling; Frequent; Move hand jacks from place to place, • Carrying; Frequent; Up to 50 lbs., up to 10 feet, occasionally more, • Climbing; In-frequent; Stairs in storage rooms; ladders, • Vision; Constant; Read labels, recognize boxes, safety in working Costello’s Ace Hardware is an equal opportunity employer. Job Type: Full-time Pay: $60,000.00 - $75,000.00 per year Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee discount, • Flexible schedule, • Flexible spending account, • Health insurance, • Paid time off, • Retirement plan, • Vision insurance Shift: • 10 hour shift, • 8 hour shift, • Day shift, • Evening shift, • Morning shift Experience: • Retail management: 3 years (Preferred), • Customer service: 5 years (Preferred) Ability to Commute: • Long Island, NY (Required) Work Location: In person

Job DescriptionAre you a highly motivated and reliable Assembly Technician? Are you looking for a collision repair company that values People and Processes while working alongside those with a Passion for auto repair? This is your opportunity! If you are tired of the mediocre shop, allow us to take you out of the average and put you into the future of the collision repair business. Each teammate is a valued part of the repair process. We support each team member with the tools and support needed to succeed: state-of-the-art collision repair equipment, tools and all the training you can handle. You will expand your skills while being paid! What’s in it for you? * Medical, Dental, and vision insurance for you and your family (including domestic partners) * $50,000 employer-paid life insurance policy * 401K plan with an employer match * Employee Assistance Program includes confidential assistance in the following areas * Counseling from relationships to stress and substance abuse * Work/Life benefits, including personal, financial, and legal issues * Self-Help benefits * Peak performance coaching * Lifestyle saving benefits for wellness, shopping, travel * Personal development and training * Heath savings account to assist with medical bills * Paid time off to promote work-life balance * 8 paid holidays, including Black Friday, and get your Birthday as a floating holiday! * Growth opportunities within our company * Paid training including industry certifications, I-Car & OEM The specific pay rate/salary offered to a candidate may be influenced by several factors including experience, education, specialized certifications from OEMs, and where the job is located. Technician Specific Benefits * Shop equipped with the newest technology and equipment * Uniforms provided * Work environment OSHA certified to current quality standards * Market competitive wages and pay structures The Disassembly & Reassembly Technician is responsible for disassembling, inspecting, and assessing vehicles for additional or hidden damage. Once the vehicle is ready, the technician will reassemble the vehicle. Job Requirements: * Follow the company blueprinting process and disassembly procedures (DFR) for all vehicle inspections * Disassemble vehicles after the initial estimate, inspect all vehicles for internal structure and parts from the initial inspection (estimate), and identify additional damage * Complete disassembly of the vehicle to assist estimators in assessing damage to prepare a 100% repair plan * Document and record additional damage and required parts on a damage report (including blend panels, small parts, on-time use fasteners, moldings, etc.). * Notify the production manager/estimator regarding supplements based on additional damage/parts discovered * Assist the metal technician with reassembly upon completion of the repair, as needed * Perform light non-structural repairs – light finishing, sanding, minor bumper repairs, etc. * Reassemble vehicle – replace final moldings, trim, and detail pieces * Perform assigned duties safely and responsibly that does not expose yourself or other employees to unnecessary risk of injury * Other duties as assigned Skills, Qualifications & Requirements: * At least one year of auto body repair experience * Must be at least 18 years of age * HS Diploma or GED, Auto Body Vo-Tech certification strongly preferred * Ability to effectively communicate with others * Ability to read and understand basic instructions, written estimates, and work orders * Multi-tasking; adapt easily to fast-paced environments Physical Requirements: * Ability to stoop, bend, squat, kneel and pull * Extended periods of kneeling, bending, squatting, and stooping to complete or inspect repairs * Carry and lift heavy objects (up to 80lbs) * Manual dexterity and eye/hand coordination to operate equipment * Performing repetitive motions We are an equal opportunity employer and consider all qualified applicants equally regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, veteran status, or disability status.

Job Description The Arcticom Group (“TAG”) is a U.S.-based network of commercial and industrial mechanical services companies that provide HVACR service, maintenance, and installation services throughout North America. TAG is committed to being an “employer of choice” and ensuring employees have a home where they can learn and grow. With competitive compensation and an attractive benefits package, TAG is an exciting place to work. TOMCO is seeking a Warehouse Operator to support Construction and Service operations in and around the Westbury, NY area. Role Summary The Warehouse Operator is responsible for the daily operation and organization of the warehouse, inventory control, material handling, and logistics support for field operations. This role works independently to ensure inventory accuracy, efficient distribution of materials, and a safe, organized warehouse environment while supporting technicians and management across multiple departments. This will be a 638b shop hand position with 638 benefits. Roles and Responsibilities: • Perform day-to-day warehouse operations independently while maintaining required inventory levels • Receive stock and non-stock items, verifying specifications, quantity, and quality, • Load and unload deliveries to support Construction and Service departments, • Pick up and deliver parts, tools, and equipment to various job sites as needed, • Operate warehouse equipment such as forklifts, pallet jacks, and hand trucks safely and efficiently, • Maintain an organized warehouse layout to support efficient workflow, • Research discrepancies on orders and packing slips and coordinate returns with vendors, • Manage inventory records, identify losses, and assist with returns management, • Distribute incoming packages to the appropriate departments, • Maintain company parts, equipment, and tools in good working condition, • Support upkeep of company shop vans and trucks, • Haul waste materials to approved disposal locations as required, • Ensure all warehouse and storage areas are clean, organized, and free of safety hazards, • Perform general facility cleaning tasks such as trash removal, mopping, and light groundskeeping, • Comply with all company policies, safety procedures, and applicable standards, • Perform additional duties as assigned by the Service Manager Skills and Qualifications: • 2–5 years of warehouse experience, including forklift operation, • High school diploma or equivalent, • Valid California driver’s license with a clean driving record, • Current DOT medical card or ability to obtain one, • Ability to safely operate vehicles with manual and automatic transmissions, • Ability to work independently with minimal supervision, • Strong organizational, multitasking, and time management skills, • Effective verbal and written communication skills, • Ability to read and understand safety manuals, policies, and work instructions, • Ability to interact professionally with a diverse workforce, • Proficiency with Microsoft Word, Excel, email, and internet-based systems, • Ability to accurately enter data into internal and customer systems Preferred Qualifications: • Experience and/or working knowledge of HVAC/R equipment, • Prior experience supporting construction or field service teams, • Familiarity with inventory management systems Benefits: • Competitive pay, • Medical, dental, and vision insurance, • 401(k) with company match, • Paid time off and paid holidays, • Company vehicle (as applicable), • Year-round, steady work, • Opportunities for advancement, • Supportive, team-oriented work environment

Job Description C Check-Mate Manufacturing offers competitive pay and benefits JOURNEYMAN TOOL & DIE MAKER (United States Citizens or Green Card Holders Only -No Sponsorships Available) Check-Mate Manufacturing has openings position for Tool and Die Maker. This position reporting to the Tooling Manager, the Tool and Die Maker has a Journeymen license or has completed formal apprenticeship program. Tool and Die Maker builds, repairs, and maintains: dies, fixtures, and all other tooling in conformance to customer and/or company specifications per control plans. Analyzes specifications, lays out metal stock, set up and operate machine tools, and fits and assembles parts to makes and repairs dies, cutting tools, jigs, fixtures, gauges, and machinists' hand tools. Maintains a safe working environment by ensuring compliance with procedures and safety regulations. US Citizens and Green Card Holders Only. Skills and Competencies • Tool and die maker ability to read tool and die designs and prints, • Tool and die maker basic shop math and trigonometry, • Tool and die maker ability to use precise measuring equipment such as micrometers, calipers, gauge blocks, dial indicators, etc., • Tool and die maker ability to operate all standard tool room equipment such as milling machines, drill presses, surface grinders, lathes, etc. CNC machine set up a plus, • Tool and die maker must have strong analytical and troubleshooting skills, • Tool and die maker general knowledge of tool and die design including various tool steels/carbides and their application is a plus, • Tool and die maker able to work independently and be self-motivated, • Tool and die maker must be able to work without supervision and lead small teams as required, • Tool and die maker ability to work with appropriate outside vendors, • Tool and die maker ability to train and develop apprentices, • Tool and die maker ability to communicate well with others MINIMUM REQUIREMENTS • High School Diploma or equivalent education or trade school diploma program, • Journeyman Tool & Die Maker and/ or completion of an apprenticeship (4 years) or advanced manufacturing certificate, followed by at least 4 years of on-the-job training, • 5 years’ experience in the trade; emphasis on small precision stampings from progressive dies, • An ability to communicate effectively in English both in writing and verbally (Preferred), • Excellent compensation packages, • Medical, Dental, Vision, Life, Short-term and long-term disability, • 12 Days PTO and 10 Holidays, • 401k participation after 1 year, • Training and Development Opportunities, • Annual COLA increases Powered by JazzHR aOP7W4mNAp

Job Description *MUST HAVE EXPERIENCE MAINTAINING AND REPAIRING CONVEYORS! Position Summary Maintain Machinery and Mechanical equipment by completing preventive maintenance requirements; dismantling devices; examining form and texture of parts; adjusting controls; fabricating repair parts; leading team members. Position Responsibilities: • Complete preventive maintenance prerequisites on mechanical equipment like motors, conveyors, production machines, pneumatic tools (i.e., power tools such as: air compressor, buffers, nailing and stapling guns, grinders, drills, jack hammers, chipping hammers, riveting guns, sanders and wrenches) as well as engines, thereby ensuring smooth operation of such machinery and mechanical gadgets., • Repair conveyor system and maintain forklifts, electric, and propane equipment., • Troubleshoot and repair pneumatic, electrical, hydraulic, compressor, conveyor and inspection systems as needed., • Ensure that warehouse machinery function correctly and efficiently, so that the production shift meet the company’s shipping demands on a nightly basis, and that equipment perform optimally., • Observe, dismantle, adjust, and repair mechanical devices and control instruments as needed., • Assemble, install, and fabricate equipment as well as perform preventative and predictive maintenance as well as update all required documentation to include nightly repair logs., • Design, develop, manage and maintain control systems (i.e. Distributed Control System, Programmable Logic Controller). Perform all work and conduct oneself in a manner that promotes safety of the individual and all other at employees., • Troubleshoot, make necessary repairs or upgrades, and perform preventative maintenance and service to process control equipment, control systems, equipment calibration, and instrumentation equipment to provide for the reliable operation of this equipment. Investigate problems, analyze for root causes and derive resolutions., • Attend shop meetings and utilize/maintain personal tools., • Prepares and sets up machinery for scheduled production runs., • Maintains efficient operation of material handling equipment by clearing jams and removing foreign materials., • Familiar with automatic controls and 480 volt 3 phase electrical systems., • Familiar with Occupational Safety and Health Administration (OSHA) safety and health regulations., • Knowledge with proper use of pneumatic (i.e., power tools such as: air compressor, buffers, nailing and stapling guns, grinders, drills, jack hammers, chipping hammers, riveting guns, sanders and wrenches), electrical, and hydraulic conveyor systems., • Knowledge in basic cutting/welding, electrical/wiring and carpentry experience helpful., • Experience operating a Forklift in addition to heavy equipment., • Excellent mechanical skills in order to read and interpret technical manuals and sophisticated diagnostic equipment to perform required maintenance and service., • Able to reassemble large, complex equipment after completing a repair., • Manual dexterity required for operating machinery and equipment when handling parts, must have a steady hand and good hand-eye coordination., • Excellent problem solving/trouble shooting skills in order to observe, diagnose, and fix machinery malfunctions., • Technical experience and exposure to high-speed equipment.

Job DescriptionDescription: Who We Are United Ag & Turf NE is a John Deere Dealership with multiple locations across the Northeast. We service customers in a variety of industries such as commercial, construction, agricultural, as well as consumers. United Ag & Turf strives for exceptional customer service throughout all our locations and departments including parts, sales, and service. United sees an incredible opportunity in the Northeast to continue to expand the John Deere brand. We will continue to invest heavily in the region, building new facilities, updating and upgrading operations and empowering the business to continue to bring on talented, hardworking people to the team. United Ag & Turf is a sister company to United Construction & Forestry, so the opportunities for our employees to leverage career growth and advancement are endless. We invite you to join us now, as this is just the beginning. What You’ll Get • A comprehensive employee benefits plan that includes medical, dental, vision, and 401K Match, • Referral Bonus, • Earned PTO, • Employee Assistance Program, • Paid Company holidays, • Company Paid Life Insurance, • Great Work/Life Balance Schedule: Monday – Friday 1st shift – Saturdays as needed United Ag & Turf NE is looking for an Inventory Facility Coordinator team member. The candidate will be responsible for whole goods inventory tracking and maintaining the image of store facilities, lot and grounds through routine maintenance. Support fellow employees and customers with loading and unloading equipment while maintaining organization and safety. What You’ll Do • Primary branch team member accountable for whole goods inventory presentation, accuracy, tracking and accountability., • Maintain accurate store whole goods inventory through inventory tracking system and related processes., • Receipting of all whole goods into DIT within 24 hours of arrival, • Includes DIT sticker placement and pictures in DIT of serial number tag, bill of lading and/or packing slip, and 4 corners of machine Aggregate attachments to base units as needed after shop set up/installs, • Ensure 100% compliance for DIT sticker usage and accuracy, • Including all new and used machines, new and used attachments, field kits and factory installed and/or removable base coded attachments/kits, • Complete in/out checks on whole goods at time of movement, • All equipment movement requires pictures and updated hours. Rentals, loaners & demos require more detailed pictures to capture potential damages., • Includes: Any good item arriving or departing your facility regardless of the reason or means of transportation (hired truck, customer pick up, sales rep, United driver, or common carrier), • Complete required DIT inventory verification and whole goods financial audits within designated timeframe indicated by the inventory team., • Complete monthly DIT self-audits to maintain accountability and accuracy., • Monitor daily/weekly reports and resolve open issues in a timely manner, • Research and resolve inventory discrepancies in a timely manner., • Keep lot organized and notify manager of supplies and tooling needed., • Maintain a well-organized lot and storage area(s) with dedicated staging areas for accurate inventory management and efficient DIT usage., • Monitor staging and DIT supplies and reorder as needed to ensure supplies are always on hand, • Stage deliveries so they are completed and ready to go., • Ensure all components included with the sale are staged, aggregated and ready for DIT check out process to be completed when customer picks up or delivery takes place, • Organize service repairs for service work to be completed., • Stage Whole Goods units requiring service work in dedicated service staging area; ensuring all components included with the unit are marked and staged with the base unit., • Follow up after service work is completed and aggregate attachments and kits per aggregation process then move equipment and its aggregates to the next staging area., • Communicate rent, loaner, or demo damages / required repairs to GM and Service Manager upon immediate return of equipment., • Unload and load equipment ready for delivery., • Primary branch contact for loading and unloading all whole goods products to ensure compliance with DIT processes (Ensure that a packing list is used to verify all inventory is received accurately)., • Facility Maintenance (Lawn Mowing, Clean Parking Lot, Shovel) including general appearance of the store., • Pressure washing equipment and ensure it is clean and ready for the customer., • Ensure all whole goods inventory is clean and presentable; pressure washed and in working order if on display., • Assists in Maintaining condition of vehicles, inventory, tools and equipment., • 30–45-day rotation of starting each piece of equipment in the yard & allow to run for 15-20 minutes (and follow proper protocols for switching machine’s battery switch to the off position)., • Basic computer skills, • Ability to operate vehicles and equipment., • Understanding of rigging equipment for proper lifting., • Multi-task in a fast-paced environment., • Must be self-motivated., • Exceed customer’s expectations and possess a ‘Yes We Can’ attitude., • Forklift certified The physical demands described here are representative of those that must be met by employees to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • While performing the duties of the job, the employee is required to stand, sit, talk, hear and use hands and fingers to operate a computer keyboard and telephone, • Specific vision abilities required by this job include close vision requirements, • Hearing ability is sufficient to communicate with others in person or over the phone, • Light to moderate lifting may be required (up to 50 pounds), • Ability to reach, stoop, kneel, and bend as needed, • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, and depth perception.?

Job Description First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. This position will perform routine and non-routine maintenance, diagnostic and repair work on vehicles (buses, vans etc.) which adheres to FirstGroup standards. Performs work under minimal supervision. Handles more complex problems and can resolve independently. All work is performed with a commitment to safety. May mentor or provide informal guidance to Technician I and/or Technician II. Also, may act as a Shift Foreman and may receive a shift premium.In the state of Washington, this position is considered a safety-sensitive position and is therefore subject to drug and alcohol testing, including cannabis.$36.07/hr • Job DescriptionMajor Responsibilities, • Ensure vehicles are maintained and safe for our customers by performing limited repairs with minimal supervision on both basic and complex maintenance such as replacement of light bulbs, fuses, lenses, wiper blades, belts, hoses, batteries, check fluid levels, change fluids and filters and lubricate components., • Perform mechanical repairs under minimal supervision including the repair of brakes and brake inspections, engine tune-ups, suspensions, drive trains, transmission clutches and other repairs., • Maintain records of all maintenance work completed on vehicles including parts and supplies used. Ensure that work orders are completed properly and accurately. Maintain parts usage records and order repair parts from designated suppliers., • Diagnoses and performs accurately all phases of vehicle and equipment repair under minimal supervision. May perform diagnostic tests utilizing a computer and manufacturer's software to determine mechanical defects., • Lead preventative maintenance (PM's), safety maintenance inspections and annual maintenance inspections at prescribed intervals of time and usage, • Remove, overhaul and reinstallation of mechanical components with minimal Tech in Charge supervision, • Notify supervisor of potentially dangerous equipment and corrective action taken, • Evaluates completed work prior to release and seeks approval where required, • Leads road calls and emergency services as necessary, • Adhere to FirstGroup standards, policies and procedures, • Moves vehicles safely between job and work area, • Repair and maintain all shop equipment, • Other responsibilities as requested or required Minimum Education or Certifications Required • High school diploma or GED equivalent preferred; vocational or technical certification in vehicle repair (preferred), • Class B CDL with passenger endorsement required (or expected within 3 months of hire), • State inspection license (if required), • ASE Certification preferred. Must participate in ASE testing program (expected to have 6 ASE within 6 months of hire) Minimum Experience or Skills Required • Advanced mechanical aptitude and 5 years of automotive or diesel repair experience (preferred) or equivalent education and experience, • Adhere to standards set by state DOT for motor vehicle inspections and safety standards, • Valid driver's license, • Advanced problem-solving ability, • Advanced computer skills, • Comfortable using hand tools, • Excellent customer service skills and communication skills, • Ability to work independently as well as part of a team, • Maintain an organized shop and clean work environment, • Regular, predictable, full attendance is an essential function of the job, • Making sure vehicles are maintained and safe for our customers, • Possess adequate mechanic tool inventory to complete all assigned duties and maintained in a clean and safe manner Physical Requirements and Working Conditions • Maintenance Shop environment with dust, dirt and grease conditions, • Ability to work under all weather conditions, • Ability to lift a minimum of 50 pounds All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request .

Job Description Summary Certifies, fabricates, assembles, installs, alters, maintains and dismantles all piping and plumbing, including hangers and supports, and pipe cutting, bending and welding activities necessary to the performance of the task. Duties and Responsibilities • Certifies, fabricates, assembles, installs, alters, maintains and dismantles all piping and plumbing, including hangers and supports, and pipe cutting, bending and welding activities necessary to the performance of the task., • Installs, maintains and repairs necessary piping on refrigeration, heating and air conditioning equipment. Installs and dismantles unit heaters and coolers, shell type heat exchangers, tanks and package boilers. Installs filters, seals and packing on air, refrigeration, heating and air conditioning equipment except compressors in the shop for rebuild., • Certifies, installs, adjusts and maintains such items as gages, regulators, temperature control devices, recording instruments and flow meters pursuant to the task (excluding calibration)., • Installs insulation and covering on all piping and equipment as described above., • May lubricate equipment when necessary in the performance of related tasks., • Uses all tools and equipment pursuant to the task, including hand or power equipment to hoist and move personnel and materials except mobile cranes., • May transport tools, materials, and equipment to and from job site which are to be used by employees in the Pipefitter job classification., • Performs related tasks as necessary in the completion of the employee's primary work assignment in the Pipefitter job classification., • May perform cleaning of roof cooling towers pursuant to the task., • US Citizenship, able to obtain and maintain US DOT clearance, • Ability to work any shift, • Valid Driver's License, • Certified Welder, • Journeyman Pipefitter, • NATE Certification, • Welding Certification

Job DescriptionSUMMARY OF POSITION The Assistant Production Supervisor supports daily manufacturing operations within manufacturing and production areas. This role assists in coordinating production activities, ensuring that safety, quality, and productivity standards are consistently met. Working closely with management to monitor workflow, support staff, and ensure machines and processes operate efficiently to meet production schedules. The position plays a key role in maintaining a safe work environment, enforcing company policies, and supporting continuous improvement initiatives. ESSENTIAL FUNCTIONS: Includes, but may not be limited to the following: • Assists the Production Supervisor in coordinating daily production activities to meet production schedules and customer delivery requirements., • Assists with shift start-up activities including machine readiness, tooling verification, material availability, and operator assignment., • Monitors machines and production lines during the shift to ensure output, quality, and safety standards are maintained., • Responds to production interruptions and escalates issues to Maintenance or Production Supervisor to minimize downtime., • Communicates production priorities and shift objectives to operators., • Provides technical and operational support to operators to maintain production efficiency and quality., • Ensures operators follow documented standard operating procedures, work instructions, and safety requirements., • Supports monitoring of Key Performance Indicators (KPIs) including production output, scrap, downtime, and efficiency., • Ensures accurate completion of production documentation and reporting through ERP systems such as PLEX., • Monitors product quality and escalates potential issues to Quality or Production Supervisor as needed., • Supports implementation of engineering changes, production trials, model changes, and pilot builds., • Communicates production issues and support needs to Planning, Engineering, Quality, and Maintenance., • Monitors material flow to ensure workstations remain supplied and production is not interrupted., • Assists in maintaining cleanliness and organization of the production floor in accordance with company standards., • Supports training of operators on equipment, processes, and standard work instructions., • Assists in monitoring employee attendance and reporting concerns to the Production Supervisor., • Assists Production Supervisor with incident, accident, and non-conformity reporting and documentation., • Supports Lean manufacturing initiatives and continuous improvement activities within the production area., • Supports production boards, shift communication, and visual management systems., • Other duties may be assigned. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential function satisfactorily. Reasonable accommodation may be provided to enable a qualified individual with disabilities to perform the essential job functions., • Associate’s degree in business, management or another related field supplemented by 2 (or more) years of experience in a lead role, manufacturing, production, or continuous improvement., • High school diploma supplemented by 5 (or more) years of experience in a lead role, manufacturing, production, or continuous improvement environments.KNOWLEDGE, SKILLS AND ABILITIES:, • Experience in metal stamping, fabrication, assembly, or industrial manufacturing environments preferred., • Experience leading, training, and coordinating production employees., • Ability to assist in supervising shift activities, delegating tasks, and monitoring workforce performance., • Basic knowledge of Lean Manufacturing principles and continuous improvement methods., • Experience with ERP systems such as PLEX, SAP, AS400 or other manufacturing enterprise resource planning systems preferred., • Strong communication and problem-solving skills., • Ability to prioritize tasks and support multiple production activities simultaneously., • Basic mechanical aptitude and understanding of manufacturing processes preferred., • Understanding of and experience with ISO 9001 standards preferred., • Experience enforcing workplace safety procedures and compliance with OSHA or company safety policies., • Ability to promote a strong safety culture on the production floor.PHYSICAL REQUIREMENTS:, • While performing the duties of this Job, the employee is regularly required to stand, sit and walk for extended periods of time. Employees must be able to sit and stand for long periods of time. The employee is occasionally required to stoop, reach overhead, lift and/or move up to 50 pounds. Tasks require manual dexterity, hand, arm, and finger dexterity to operate tools, machinery, computer keyboard and other equipment. In addition to visual and hearing acuity; as well as identifying and distinguishing colors. ENVIRONMENTAL REQUIREMENTS: 4xgT3RsGIt

Job DescriptionDescription: Who We Are United Ag & Turf NE is a John Deere Dealership with multiple locations across the Northeast. We service customers in a variety of industries such as commercial, construction, agricultural, as well as consumers. United Ag & Turf strives for exceptional customer service throughout all our locations and departments including parts, sales, and service. United sees an incredible opportunity in the Northeast to continue to expand the John Deere brand. We will continue to invest heavily in the region, building new facilities, updating and upgrading operations and empowering the business to continue to bring on talented, hardworking people to the team. United Ag & Turf is a sister company to United Construction & Forestry, so the opportunities for our employees to leverage career growth and advancement are endless. We invite you to join us now, as this is just the beginning. What You’ll Get • A comprehensive employee benefits plan that includes medical, dental, vision, and 401K Match, • Referral Bonus, • Earned PTO, • Employee Assistance Program, • Paid Company holidays, • Company Paid Life Insurance, • Great Work/Life Balance Schedule: Monday – Friday 1st shift – Saturdays as needed United Ag & Turf NE is looking for an Inventory Facility Coordinator team member. The candidate will be responsible for whole goods inventory tracking and maintaining the image of store facilities, lot and grounds through routine maintenance. Support fellow employees and customers with loading and unloading equipment while maintaining organization and safety. What You’ll Do • Primary branch team member accountable for whole goods inventory presentation, accuracy, tracking and accountability., • Maintain accurate store whole goods inventory through inventory tracking system and related processes., • Receipting of all whole goods into DIT within 24 hours of arrival, • Includes DIT sticker placement and pictures in DIT of serial number tag, bill of lading and/or packing slip, and 4 corners of machine Aggregate attachments to base units as needed after shop set up/installs, • Ensure 100% compliance for DIT sticker usage and accuracy, • Including all new and used machines, new and used attachments, field kits and factory installed and/or removable base coded attachments/kits, • Complete in/out checks on whole goods at time of movement, • All equipment movement requires pictures and updated hours. Rentals, loaners & demos require more detailed pictures to capture potential damages., • Includes: Any good item arriving or departing your facility regardless of the reason or means of transportation (hired truck, customer pick up, sales rep, United driver, or common carrier), • Complete required DIT inventory verification and whole goods financial audits within designated timeframe indicated by the inventory team., • Complete monthly DIT self-audits to maintain accountability and accuracy., • Monitor daily/weekly reports and resolve open issues in a timely manner, • Research and resolve inventory discrepancies in a timely manner., • Keep lot organized and notify manager of supplies and tooling needed., • Maintain a well-organized lot and storage area(s) with dedicated staging areas for accurate inventory management and efficient DIT usage., • Monitor staging and DIT supplies and reorder as needed to ensure supplies are always on hand, • Stage deliveries so they are completed and ready to go., • Ensure all components included with the sale are staged, aggregated and ready for DIT check out process to be completed when customer picks up or delivery takes place, • Organize service repairs for service work to be completed., • Stage Whole Goods units requiring service work in dedicated service staging area; ensuring all components included with the unit are marked and staged with the base unit., • Follow up after service work is completed and aggregate attachments and kits per aggregation process then move equipment and its aggregates to the next staging area., • Communicate rent, loaner, or demo damages / required repairs to GM and Service Manager upon immediate return of equipment., • Unload and load equipment ready for delivery., • Primary branch contact for loading and unloading all whole goods products to ensure compliance with DIT processes (Ensure that a packing list is used to verify all inventory is received accurately)., • Facility Maintenance (Lawn Mowing, Clean Parking Lot, Shovel) including general appearance of the store., • Pressure washing equipment and ensure it is clean and ready for the customer., • Ensure all whole goods inventory is clean and presentable; pressure washed and in working order if on display., • Assists in Maintaining condition of vehicles, inventory, tools and equipment., • 30–45-day rotation of starting each piece of equipment in the yard & allow to run for 15-20 minutes (and follow proper protocols for switching machine’s battery switch to the off position)., • Basic computer skills, • Ability to operate vehicles and equipment., • Understanding of rigging equipment for proper lifting., • Multi-task in a fast-paced environment., • Must be self-motivated., • Exceed customer’s expectations and possess a ‘Yes We Can’ attitude., • Forklift certified The physical demands described here are representative of those that must be met by employees to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • While performing the duties of the job, the employee is required to stand, sit, talk, hear and use hands and fingers to operate a computer keyboard and telephone, • Specific vision abilities required by this job include close vision requirements, • Hearing ability is sufficient to communicate with others in person or over the phone, • Light to moderate lifting may be required (up to 50 pounds), • Ability to reach, stoop, kneel, and bend as needed, • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, and depth perception.?

Job Description Who We Are South Oxford Management (SOM) is a leading full-service property management company with a presence in Texas, Georgia, Virginia, New Jersey, Florida, and Connecticut. We are committed to delivering exceptional experiences for both our residents and team members. Our owners and leadership team bring extensive industry experience, ensuring that quality and excellence are woven into every facet of our operations—from asset management to leasing. We are passionate about creating positive experiences and believe in putting people first. When you become a part of South Oxford Management, you join a supportive team that values learning, encourages idea sharing, and actively engages in team building and community service activities. How You Will Contribute The Maintenance Supervisor is responsible for maintaining the physical integrity of the community, ensuring a safe and secure environment for residents, future residents, visitors, and team members. The Maintenance Supervisor collaborates closely with the Community Manager and Maintenance Technicians to ensure that all aspects of the community are well-maintained. The Maintenance Supervisor anticipates, identifies, and corrects problems affecting the community, and implements procedures to prevent such issues. The Maintenance Supervisor works diligently to cultivate resident satisfaction. The start date is anticipated between May 01, 2026. Things You Will Do Leadership • Assist in the hiring, training, and supervising of all maintenance team members through a positive mentoring approach, • Lead service staff, delegate work orders, and inspect completed jobs, • Perform routine maintenance work orders at the community, which may include completing emergency and on-call tickets, • Schedule team members so that maintenance is available for emergency purposes around the clock, • Ensure OSHA and safety standards are followed, • Maintain accurate records regarding preventive maintenance, maintenance requests (received and completed), expenditures, apartment make-ready status, work-in-progress, etc, • Schedule and ensure all make-ready repairs and services are completed correctly and on schedule according to company policy, • Maintain an adequate inventory of spare parts and maintenance materials to handle the most common repairs and situations, • Keeping the Maintenance Shop stocked, organized, and clean, • Diagnose and perform maintenance/repairs, including but not limited to HVAC, plumbing, electrical, and pool maintenance, • Interface with contractors and vendors; depending on the property needs and secure bids for services, • Think safety first and ensure that unsafe conditions are corrected promptly, • Be mindful of the condition of the community and initiate action to correct unsafe conditions, i.e., broken gates leading to the pool, broken steps, open holes, broken/burned-out exterior lights, • Always bring “service with a smile”, partnered with a "can-do" attitude, • Act as the gatekeeper of maintenance information — tracking and assigning everything from resident service requests to preventive maintenance records., • Take pride in the apartment community; visually inspect and address areas of concern, keep the community clean, and make note of service needs, • Communicate effectively with residents, future residents, visitors, vendors, and team members while presenting a positive, professional image, • You must have a valid driving license., • High School diploma or equivalent, • Three or more years of experience in property maintenance or an equivalent field., • Must be available to work a flexible schedule, including weekends, holidays, overtime, and on-call hours., • Must be able to walk the property, which includes climbing stairs., • Must be able to bend, stoop, squat, kneel, climb stairs, push, pull, reach, and carry supplies., • Stand for extended periods of time., • Experience leading and managing others., • General knowledge of all things pertaining to property maintenance., • Proficient and comfortable using computers and various software programs., • Skilled in the safe use and maintenance of hand and power tools., • Knowledgeable of pertinent laws, including EPA and OSHA regulations., • Certified Pool Operator, Universal Freon License, including R410A preferable., • Attention to detail., • $45.67 hr., • Medical/Rx, • Dental, • Vision, • Employer Paid Life/AD&D, • Voluntary Life/AD&D, • Short Term Disability, • Long Term Disability, • Employee Assistance Program, • Accident Plan, • Hospital Indemnity Plan, • Critical Illness Plan, • Legal/ID Theft Protection, • Pet Insurance, • 401(k) Retirement w/ Match + Immediate Vesting, • Paid Holidays and Time Off (3+ weeks), • Rent Discount (30%), • Tuition Reimbursement($2,000/year), • Paid Parental Leave (4 weeks), • Employee Referral Bonus South Oxford Management LLC is committed to providing a workplace that is free from the use, sale, possession, or distribution of illegal drugs and alcohol, as well as free from the abusive use of legal drugs or alcohol. All job applicants are required to take and successfully complete a drug and/or alcohol test before they will be permitted to begin employment. Applicants who refuse to take a test or do not cooperate with the test representatives will not be permitted to begin employment. If a test yields a positive result for drugs or alcohol, the Company may withdraw the offer of employment to an applicant where permitted by state law.

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Bonus based on performance, • Company car, • Competitive salary, • Dental insurance, • Health insurance, • Paid time off, • Parental leave, • Vision insurance Were hiring a Senior Sales & Service Plumbing Technician who wants to win, learn, grow, and teach. Someone who takes pride in their craft, radiates humble confidence, and holds themselves to a higher standard than any boss ever could. Youll wear the pink & black as a top producer, mentor, and field leader setting the bar for how our clients are treated and how our team performs. The Role: This is more than a plumbing job. Its a high-accountability, high-upside field leadership role. Youll run complex residential service calls, lead by example on diagnostics and option-based selling, and help sharpen the rest of the team through real-time support and training. Youll be expected to consistently hit serious numbers each month while living our values: • Revenue: $40,000$50,000+, • Membership conversion: 10%+, • Average ticket: $700+, • Reviews: 10+ 5-star Google reviews, • Opportunity conversion: 8590% with rare callbacksYoull partner closely with dispatch and operations, protect our reputation on every call, and help develop newer techs into true professionals. For the right person, this role is a direct path into Manager-on-Duty / field leadership, but the non-negotiable is this: be a protector, stay on call (mentally) until its fixed, and bring the energy. In Your First 12 Months, Youll Focus On: • Delivering 5-star client experiences on 34 high-quality calls per day through expert diagnostics, clear communication, and clean work., • Consistently hitting revenue, membership, and review targets while honoring our ground rules: Service > Sales. Integrity > Revenue. People > Profit., • Leading from the field supporting techs in real time on estimates, troubleshooting, and options so they can close confidently and profitably., • Owning your craft and your numbers: knowing your revenue, gross profit, memberships, and reviews without needing a reminder., • Participating in weekly team meetings, weekly tech training, and regular 1:1s to sharpen skills and help shape the standard for the whole shop., • Taking a fair share of after-hours work (minimum 1 night per week and 1 weekend per month) and showing up as the steady hand clients and teammates can count on.Who You Are:, • Protector mindset. You take responsibility for the client, the job, and the outcome. You dont clock out mentally until its truly handled., • Humble confidence. You know your stuff, listen first, and let your work and numbers speak for you. No ego, no drama., • Sales-minded technician. You believe options, education, and prevention are how you serve and youre comfortable asking for the business., • Teacher and teammate. You enjoy showing others the why behind the work and raising the bar for the whole crew., • Calm and composed under pressure. Emergencies, after-hours calls, and tough diagnoses dont rattle you., • Tech-savvy and organized. Comfortable with tablets, mobile apps, and dispatch software to keep jobs, photos, and notes tight.Minimum requirements:, • 3+ years of residential / commercial service plumbing (not just new construction)., • Clean MVR, background friendly to entering clients homes., • No smoking in uniform or company vehicles., • Base pay: Competitive hourly rate (commensurate with experience) plus consistent overtime from after-hours and weekend shifts., • Incentives (Plumbing Protector Program):, • Monthly profit share on high gross profit performance., • Quarterly bonus for top-tier protectors., • Activity-based bonuses for water mitigation leads, memberships sold, 5-star reviews, and recruiting other great plumbers., • Realistic Year 1 total compensation: $120,000$150,000 for high performers who hit targets., • Benefits: Health, dental, 401(k) with match, PTO, company events, take-home truck, company credit card, uniforms, tablet, and most tools provided.If youre a service pro who wants to be paid like a top performer, held to a serious standard, and given the platform to lead and teach, this is your shot. Apply with a short note on your best month ever (revenue + reviews) and why youre ready for a higher bar.*

Job Description Machine Maintenance Engineer Manager - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding good quality people, which is why we will provide a screening to see if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The Facilities & Maintenance Engineer Manager will ensure that safety comes first in all efforts while directly supporting the needs of Production. This position will oversee the repairs, installations, and upkeep of facilities, equipment, and offices. This is a hands-on position where detailed knowledge of equipment and facilities is required. Their main duties include designing maintenance procedures, tracking budgets and expenses and performing inspections to find problems and make repairs. The position requires knowledge of manufacturing machines (CNC, Vacuum Braze Ovens, etc.) for installation, preventative maintenance, repairs, and upkeep. Candidates with these skills will be considered. SUPERVISORY RESPONSIBILITIES • Supervise employees of the maintenance department. Duties and Responsibilities: • Maintain a safe work environment while meeting the needs of production., • Ability to work independently or as a part of a team., • Perform routine work throughout the production floor., • Monitor, repair, and cite problems with process and production equipment., • Coordinate with various contractors to obtain the necessary repair information, required parts, and procedures to complete various projects and tasks., • Designing maintenance procedures, tracking budgets and expenses, and performing inspections to find problems and make repairs., • Train and supervise employees of the maintenance department., • Responsible for machine and facility maintenance., • Facilitates and assists Facility property insurance company by scheduling and participating in regular facility audits and follows up to address and implement corrective actions when deemed appropriate., • Negotiate contracts with outside vendors for execution of maintenance work., • Ensure operational efficiency of electrical equipment and mechanical systems through timely inspection and repair., • Ensure that company premises and facilities are kept in clean and hygienic condition., • Perform other duties and assignments as required. QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Machine & and Equipment Repair, • Ability to maintain, troubleshoot, disassemble, and repair production equipment in a safe manner while minimizing downtime., • Execute machine repairs, alignments, lubrication, coolant changes, etc., • Demonstrate a willingness to learn various systems throughout the multiple trades., • Electrical, HVAC, & Plumbing:, • Basic understanding of electrical systems, including DC and AC voltage ranging from 24V to 480V., • Be able to read, interpret, and modify electrical prints and schematics., • Experience in ladder logic, PLC’s, VFD’s, instrumentation and control devices., • Familiarity with the operation of gas and oil heating systems., • Familiarity with the general operation of air handlers, condensers, and evaporators EDUCATION AND/OR EXPERIENCE • Bachelor’s degree required., • Minimum of five to ten years of experience and/or training., • Background in general maintenance of manufacturing machines, • General knowledge of process equipment (i.e. automated systems, chillers, air compressors, hydraulics, pneumatics, etc.), • Demonstrate proficiency in the safe use of an array of hand and power tools., • Experience with MS Office is preferred. SAFETY • Support a safety culture on the production floor., • Observance of guidelines of the safe use, handling, and disposal of various chemicals used., • Knowledge of safety topics (i.e. Lockout Tagout, Arc Flash, Machine Guarding, Hazcom, DOT, RCRA, Material Handling, etc.) LEADERSHIP • The individual must be a problem solver., • Sound analytic skills and decision-making capabilities, • Strong results orientation and execution capability; Excellent strategic and tactical thinking, • Proven ability to effectively manage multiple priorities in a fast-paced environment and consistently meet deadlines and achieve desired results., • Demonstrated ability to lead, motivate and coach people in varying disciplines to achieve performance goals; Solid team building skills., • Excellent written and verbal communication skills; able to communicate as effectively on the shop floor as in the executive suite. PHYSICAL DEMANDS • Ability to lift 50lbs., • This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing throughout the day., • Fine manipulation and repetitive motion may be required for some duties. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $120,000 to $140,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job DescriptionLane Valente Industries is a Leading International construction and facility maintenance company with offices throughout the U.S. and Canada. We have a strong in-house group of field technicians that services top U.S. corporations and are supported by top notch managers in our offices. We are always looking for talented people driven to be highly productive members of the team with an emphasis on integrity and learning. CURRENT OPPORTUNITY: Electrician Apprentice Responsible for assisting journeyman and apprentices by carrying material, picking up supplies, cleaning shop floor etc. Job Responsibilities • Gathers tools and supplies to be used at work site., • Measures, cuts, and bends wire and conduit., • Drills holes for wiring and pulls or pushes wiring through opening., • Traces out short circuits in wiring., • Assists in lifting, positioning, and fastening objects such as wiring, conduit, and motors., • Performs minor repairs such as replacing fuses, light sockets, bulbs, and switches., • Maintains tools and equipment and keeps supplies and parts in order., • Disassembles defective electrical equipment, replaces defective or worn parts, and reassembles equipment., • Cleans work area, machines, tools, and equipment., • Performs other routine duties., • Applicant must have reliable transportation., • Position requires basic electricians hand tools., • Ability to work with hands, multi-task., • Some electrical knowledge helpful., • Valid state motor vehicle operator's license & clear driving record to meet Company policy., • Applicable state certification.BENEFITS OFFERED:, • Medical Insurance, • Dental Insurance, • Paid Vacations, • 401(k) retirement plan with generous company match Powered by JazzHR Ef68V2rNdf

Job Description Advance Your Career with Ford Lincoln of Huntington Now Hiring: Express, B-Level & C-Level Automotive Technicians Location: Huntington, NY Join a high-performing team at Ford Lincoln of Huntington, where your expertise is valued and your growth is accelerated. We're seeking skilled B, C and Express Level Technicians ready to thrive in a fast-paced, modern environment built for efficiency and excellence. Why Technicians Choose Us: • Fully enclosed service drive and streamlined workflow designed to maximize productivity, • Access to the latest diagnostic equipment and advanced repair technologies Responsibilities • Performs work specified on the repair order with efficiency and in accordance with dealership, • Test-drives vehicles and tests components and systems using diagnostic tools and special service equipment, • Diagnoses, maintains, and repairs vehicle automotive systems including engine, transmission, electrical steering, suspension, brakes, air conditioning, etc., • Communicates directly with the Service Advisor so that customers are informed if any additional service is needed and provides an estimate of time needed for additional repairs, • Experience at an automotive dealership, • Strong understanding of the service drive, • Years of experience vary per position, • High school diploma or equivalent, • Dexterity, requiring a steady hand and excellent hand-eye coordination, • Mechanical and troubleshooting skills, • Excellent customer service skills, • Basic computer competencies, • Positive, friendly attitude along with a customer service mentality, • Ability to work in a fast-paced environment, • Team player with ability to collaborate with others effectively, • Ability to learn new technology and repair and service procedures and specifications, • Ability to operate electronic diagnostic equipment, • Uniforms provided, • Discounts on products and services, • Highly productive shop, • Career advancement opportunities, promote from within, • ASE and state inspection certification reimbursement and all training expenses paid to further your career, • Continued education, manufacturer hands on and web-based training, • Clean and professional work environment, • 401(K), • Plan Paid Time Off (PTO), • Competitive Pay Plans, • Health Insurance, • Dental & Vision Insurance The Empire Automotive Group provides exceptional opportunities for any individual seeking to advance in the retail automotive industry. Empire has numerous operations throughout Nassau, Suffolk, Queens, Brooklyn, Westchester and New Jersey, featuring 18 different franchise brands, both import and domestic. We are the third-fastest growing privately owned automotive group in the U.S. At the Empire Automotive Group, we are passionate about shaping the future of mobility. We go beyond selling and servicing vehicles; we provide unparalleled experiences with knowledge and skills that redefine industry standards. Our commitment to respect, transparency, and integrity forms the foundation of our operation. Not only do we create meaningful customer relationships, but we also nurture strong community connections. As one team, we work to re-imagine the automotive industry, while ensuring that all drivers continue their journey forward. Come grow with us! We are an equal-opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Empire Automotive Group Ford Lincoln of Huntington 147 W 11th St, Huntington Station, NY 11746

Job Description Gabrielli Truck Sales is currently seeking to fill a position in our parts department. Base play plus commission based on sales! Responsibilities: • Looking parts up for inhouse jobs; mainly Mack, Volvo, and Kenworth and occasionally Isuzu or Hino, • Pulling and delivering parts to the shop, • Using the Decisiv system properly, • Prepping (many) kits for NYC trucks, • Properly handling used cores and warranty parts from the shop jobs. Requirements: • Computer knowledge, • Be motivated, proactive, focused and well organized, • Experience with Auto or Truck Parts Experience Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Able to work overtime when necessary, • Ability to stand all day if necessary, • Use of a hand truck if necessary, • Climbing up ladders and stairs, • Warehouse environment Gabrielli Truck Sales is an Equal Opportunity Employer. We value a diverse and inclusive working atmosphere. In furtherance of our culture, all qualified applicants will receive consideration for employment without regard to pregnancy, race, national origin, gender, age, religion, disability, sexual orientation, veteran status, marital status or any other characteristics protected by law. Gabrielli Truck Sales provides reasonable accommodations for employees and applicants with disabilities or pregnant consistent with applicable law. If you need a reasonable accommodation during the application process, please let us know. Benefits: • Medical and Dental plan, • Paid Holidays, • Paid vacation and sick/personal time, • 401k with an employer match, • EMPLOYER Paid Life insurance benefit, • Gym Reimbursement program

Hand use: single grasping, fine manipulation, pushing and pulling. Ability to handle knives and other cutting equipment. Maintains a safe, clean and well-organized working and shopping environment.

Maximizes sales potential through effective and proper procedures for prepping, storing, rotating, stocking, and merchandising product. Hand use: single grasping, fine manipulation, pushing and pulling. Ability to handle knives and other cutting equipment.

Follows cash handling procedures related to the service venues. Maximizes sales potential through effective and proper procedures for prepping, storing, rotating, stocking, and merchandising product. Maintains, or ensures maintenance of, a clean and sanitary working and shopping environment; maintai

Maximizes sales potential through effective and proper procedures for prepping, storing, rotating, stocking, and merchandising product. Hand use: single grasping, fine manipulation, pushing and pulling.

Maximizes sales potential through effective and proper procedures for prepping, storing, rotating, stocking, and merchandising product. Maintains, or ensures maintenance of, a clean and sanitary working and shopping environment; maintains equipment in accordance with WFM cleanliness and safety stand

Responsibilities: Operate an electric stand-up forklift to move pallets of merchandise and equipment within the warehouse; Hand-stack product from partial pallets onto full pallets; Follow safety and warehouse procedures.

Focus Workforce Management - - Responsibilities: Picking, packing, warehousing, and shipping product or merchandise to individual consumers or clients; Maintain excellent attendance; Follow all safety procedures; Communicate effectively; Maintain and assist keeping the facility clean.

Savers Value Village - 150-162 Hicksville Road - Responsibilities: Create an awesome experience for customers and donors; Support warehouse and production operations; Participate in onboarding and training processes.

Savers Value Village - 2309 Eggert Road - Responsibilities: Assist store production tasks and support daily operations in a high-volume thrift environment.

PrideStaff - - Responsibilities: Operate forklift safely and efficiently; Load, unload, move, and stage materials; Assist with shipping and receiving tasks; Pick, pack, and prepare orders; Maintain inventory organization and general warehouse cleanliness.

Greet guests and provide an enjoyable shopping experience for everyone. Conducts gas tank inventory and merchandising projects assigned by management.

Responsible to complete merchandise recovery and maintenance including the merchandise return / go back process and general store recovery to ensure a well-merchandised and in-stock store. Public retail store setting taking care of our customers; all public areas are climate controlled; some stock r

Category/Area of Expertise: Retail Operations.Hannaford Supermarkets started out as a fresh produce vendor in Portland, Maine way back in 1883, and is still connected to those early days of fresh produce.The Village Square Plaza Store Code 08365 Front End position is located in Clifton Park, NY.

Delaware North Gaming is hiring a part-time Count Team Member at Finger Lakes Gaming in Farmington, New York.As a Count Team Member, you will count and sort previous days' soft money and gaming chips accurately and in a timely manner, following all company and state policies and procedures.If you're

Adheres to inventory procedures and product handling guidelines. Stocks shelves and displays neatly while following merchandising planograms to maximize sales. Required to operate equipment such as a cash register, electric and manual hand jacks, floor scrubber and cardboard baler.

Scan, handle, and move merchandise efficiently and safely, including frequently lifting or moving product up to 10 pounds and occasionally lifting or moving merchandise up to 44 pounds without additional assistance from others. Empowered to make shopping quick and easy for guests at the checklanes,

Seeks out customers to understand his/her needs and assists in locating, demonstrating, selecting, carrying, and/or loading merchandise. Communicates information to customers regarding all stock, special order merchandise, feature benefits, application, and warranty information related to Lowe's pro

Greet guests and provide an enjoyable shopping experience for everyone. Conducts gas tank inventory and merchandising projects assigned by management.

To be the advocate for our guests and consistently meet our guests' expectations by providing a friendly, helpful, easy, and safe shopping experience. Responsible for delivering a friendly, helpful, easy and safe shopping experience, that meets our guests' expectations.

Must be able to grip with right, left or both hands to use handles to get in and out of the forklift, holding tablet, using pallet jacks or hand trucks, controlling and pushing the buttons on the forklift, holding the steering wheel, securing straps, cardboard, airbags, etc. Must be able to use righ

New York State Gov - Recreation & Historic Preservation Parks [Building Maintenance] As a Parks and Recreation Aide at the State of New York, you'll: Be responsible for general facility maintenance, customer service functions, and programming support; Maintain the park to ensure a clean and safe env

Ability to operate motorized and non-motorized material handling equipment.

This may be on paper or in a technology-based system (hand-held device or PC).

Handles customer complaints with integrity and poise and, when necessary, refers dissatisfied customers to the appropriate individuals for resolution.

Stocks and straightens merchandise for sale in the warehouse.

Must be able to grip with right, left or both hands to use handles to get in and out of the forklift, holding tablet, using pallet jacks or hand trucks, controlling and pushing the buttons on the forklift, holding the steering wheel, securing straps, cardboard, airbags, etc. Must be able to use righ

New Castle Building Products (NCBP) is a full-service distributor based in White Plains, NY.NCBP operates with seven core values: Caring, Urgency, Teamwork, Honesty, Accountability, Flexibility and Passion.All our 20+ locations from Massachusetts to Baltimore operate with these core values as their

This may be on paper or in a technology-based system (hand-held device or PC).