Shop hand jobs in Rochester, New YorkCreate job alerts

If you are currently an employee of Herc Rentals, please apply using this link: ___ Founded in 1965, Herc Rentals is one of the leading equipment rental suppliers in North America with 2025 total revenues reaching approximately $4.4 billion. Herc Rentals’ parent company, known as Herc Holdings Inc., listed on the New York Stock Exchange on July 1, 2016, under the symbol “HRI.” Herc Rentals serves customers through approximately 602 locations and has about 9,600 employees in North America as of December 31, 2025. As a Mechanic B, you are an expert technician and will assume an influential role in product knowledge and standards of quality within the branch. Mechanic B’s understand the standard operating procedures at the branch, region, and national level and serve as a mentor to C level mechanics. The primary focus of a Herc Rentals Mechanic B is to utilize their mechanical knowledge to support fleet maintenance operations needed to keep Herc Rentals equipment on the rental “ready line”. This goal can be achieved safely and professionally through an effective preventative and corrective maintenance program. • Maintain a consistent schedule of performing preventative maintenance of all Herc owned fleet at your branch, • Operate and test equipment to ensure it passes Herc Rentals quality and efficiency standards, • Perform routine maintenance and repairs on all Herc fleet equipment and trucks with minimal supervision, • Diagnose internal combustion engines, DC electrical systems, propane systems, hydraulics, and fuel systems, • Perform major repairs to maintain fleet equipment using diagnostic tools, hand tools, and measuring instruments with minimal supervision, • Conduct oil changes, lubrication of equipment, tire replacements, hose repairs, battery replacements and assorted services, • Utilize warranty repairs timeframes to save and mark parts, correct parts and labor on a work order, or contact vendor when necessary, • Enter work orders and complete part ordering via fleet management system, • Recondition and replace assorted parts of the heavy equipment, • Diagnoses problem areas for any significant wear or tear on the equipment, • Maintain work area in a clean and organized manner, • Produce timely and detailed service reports and repair logs, • Assist in training “C” Mechanics while taking direction from the shop lead, • Follow all company’s filed procedures and protocols, • Perform additional duties as assigned, • 2 years of experience in heavy equipment repair, • Ownership of sufficient selection of hand and air/electric tools to complete most repairs and services, • Ability to safely lift up to 50 LBs, • Ability to understand detailed technical schematics, owner manuals, and product warning labels, • Ability to operate and test equipment such as boom lifts, forklifts, compressors, portable and stationary generators, hydraulics, pumps and assorted tools and equipment, • Computer skills to support entering information into systems, • Ability to communicate effectively and efficiently, • Ability to drive/operate multiple types of vehicles and equipment, • Ability to follow up with customers in a timely manner, • Ability to handle assorted tools properly and safely, • Attention to detail, • Must possess solid written and verbal communication skills, • Understanding the importance of time management Req #: 63771 Pay Range: $24hr to $27.50 Please be advised that the actual salary offered for any position is subject to the company's sole discretion and may be influenced by various factors, including but not limited to the candidate's qualifications, experience, location, and overall fit for the role. Herc Rentals values its employees and provides excellent compensation and benefits packages which are not limited to the following. Keeping you healthy Medical, Dental, and Vision Coverage Life and disability insurance Flex spending and health savings accounts Virtual Health Visits 24 Hour Nurse Line Healthy Pregnancy Program Tobacco Cessation Program Weight Loss Program Building Your Financial Future 401(k) plan with company match Employee Stock Purchase Program Life & Work Harmony Paid Time Off (Holidays, Vacations, Sick Days) Paid parental leave. Military leave & support for those in the National Guard and Reserves Employee Assistance Program (EAP) Adoption Assistance Reimbursement Program Tuition Reimbursement Program Auto & Home Insurance Discounts Protecting You & Your Family Company Paid Life Insurance Supplemental Life Insurance Accidental Death & Dismemberment Insurance Company Paid Disability Insurance Supplemental Disability Insurance Group Legal Plan Critical Illness Insurance Accident Insurance Herc does not discriminate in employment based on the basis of race, creed, color, religion, sex, age, disability, national origin, marital status, sexual orientation, citizenship status, political affiliation, parental status, military service, or other non-merit factors. #Appcast

Champions Do More As one of the fastest-growing and most exciting brands in the industry, Crash Champions is the largest founder-led multi-shop operator (MSO) of high-quality collision repair service in the U.S. The company, which also operates the growing Crash Champions LUXE | EV Certified brand of highline and luxury EV repair centers, services customers at more than 650 state-of-the-art locations in 38 states across the U.S. Crash Champions was founded in 1999 as a single Chicago repair center by industry veteran and 2023 EY Entrepreneur of the Year Midwest award winner Matt Ebert . For more than 25 years, our vision has been anchored by the belief that delivering superior collision repair service is about People First. Welcome to Crash Champions. We Champion People. Responsibilities • Examines damaged vehicle and efficiently plans repair process., • Works and communicates with others on vehicle repair status., • Performs quality repairs while keeping on-time status in mind., • Makes decisions on repair vs. replace considering safety, cost, and cycle time., • Removes upholstery, accessories, electrical and hydraulic window operating equipment, and trim to gain access to vehicle and fenders., • Participates in all required safety meetings., • Files, grinds, and sands repaired surfaces, using power tools and hand tools., • Directs the work of an apprentice in the performance of tasks when needed, i.e., unusual problems or questions and explains procedures to assistant. Qualifications • Ability to use frame machine., • Certification in body repair preferred., • Knowledge of vehicle repair process by manufacturer., • I-CAR welding certified., • Skill in analyzing and interpreting measuring data., • Ability to supervise repair personnel., • Must be able to pass thorough background check Benefits The Company offers the following benefits for this position, subject to applicable eligibility requirements and annual updates: • Medical Insurance, • Dental Insurance, • Vision Insurance, • Group Life Insurance, • Disability Insurance, • 401k Retirement Plan with match, • Referral Bonus (“Cash From Crash”) This position is paid on a commission/ flag rate structure. Flag pay is guaranteed to meet local minimum wage requirements for all hours worked each week. The compensation range listed is the average flag pay range for a typical full-time employee in this position. The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. Submit a Referral Posted Min Pay Rate USD $65,000.00/Yr. Posted Max Pay Rate USD $167,580.00/Yr. ID 2025-17687 Category Body Technician Position Type Regular Full-Time Location : Postal Code 14615 Location : Address 1024 W. Ridge Road Remote No Posted Min Pay Rate USD $65,000.00/Yr. Posted Max Pay Rate USD $167,580.00/Yr. Prioritization Tier 1 – Priority

Title Precision Machining Manager Department Machine Shop Reports to Director of Operations SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in Rochester, RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join to RPO team! Job Summary: The precision machining manager leads people and processes, overseeing the day-to-day activities of our CNC Mill, Lathe, and Inspection teams. This individual will direct team activities with the goal of manufacturing the best possible products on time while maintaining a safe working environment, continuously improving processes, being an asset to customers, and developing employees in knowledge/competency resulting in a more effective team. Candidates must be flexible and able to respond positively to changes and challenges. They should be able to think outside the box to solve problems and willing to go the extra mile to ensure department goals are met. The ideal candidate will embrace the objectives and the culture of the company and can integrate them into daily decisions/actions consistently. You Will: • Lead the Machine Shop team., • Provide motivation, support, guidance, and constructive feedback to employees, developing and training them while building understanding of and alignment with company culture and goals., • Elevate the entire team’s capability by actively developing knowledge, skills, and abilities—coaching individuals, identifying skill gaps, and fostering a culture of continuous learning and improvement., • Address personnel issues quickly and professionally, ensuring concerns are resolved with fairness, discretion, and alignment to company policy., • Provide decisive leadership by offering clear direction in both routine and high‑pressure situations., • Handle time & vacation approval, hiring selections and decisions to discontinue employment., • Manufacture the best possible products on time., • Schedule machines and staff for maximum productivity., • Coordinate all labor and materials in the machine shop., • Identify and implement processes and procedures to improve efficiency and quality., • Make recommendations on capital expenditures to improve capacity and quality., • Monitor productivity, utilizing charts and soft knowledge to maintain maximum productivity., • Be an asset to Machine Shop clients., • For Production Team – High quality parts delivered on-time., • For Planning Team – Accurate data on labor hours, capacity, and schedule., • For Engineering Team – Rapid response for R&D and feedback regarding capabilities, costs, and print redlines. • Perform other tasks as assigned., • Must be available on reasonable notice for unscheduled overtime to meet production schedules.You Have:, • High School Diploma/GED required. Bachelor’s degree in engineering or business preferred; equivalent, relevant experience will be considered., • Minimum 5 years of experience leading personnel, including performance management and team development., • At least 10 years of hands‑on precision machining experience within a manufacturing environment., • Strong, decisive leadership with the ability to solve problems under pressure and drive team accountability., • Experience with capacity planning, resource allocation, and capital investment strategy., • Skilled in data-driven decision-making, using metrics to guide performance and identify opportunities., • Excellent interpersonal and communication skills, both written and verbal, with the ability to influence and collaborate., • Highly organized with exceptional attention to detail and the ability to manage multiple priorities., • Advanced machining proficiency preferred, including experience with Hardinge, Mori Seiki, Mazak lathes, Bridgeport/Prototrak, and Haas mills. You are: • Results-Oriented: Motivated, hard-working and ready to level-up;, • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge;, • Process Oriented: Well organized, demonstrating attention to detail;, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude;, • Accountable: Demanding the highest quality from yourself and team members;, • Detail-Oriented: Have excellent time management and organizational skills;, • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude;, • A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” You Will Enjoy: • Growth: The opportunity to learn and advance your career;, • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match;, • Wellness: Health, dental, vision & life insurance;, • Balance: 11 paid holidays, generous vacation and sick-time. Work Requirements: Physical Demands: • While performing the duties of this job, the employee is regularly required to stand: use hands to fingers, handle or feel: and reach with hands and arms. The employee frequently is required to stand, walk, stoop, kneel, crouch: and talk and hear., • The job may involve prolong periods of sitting/standing., • The employee is frequently required to use the computer., • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. May involve prolonged periods of magnified inspection (eye strain), • Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp., • The employee is frequently required to use the computer., • Culture: an energetic, caring, fun, value-driven team. Work Environment: • May involve the use of oils and solvents., • Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided), • Generally works in a clean environment and works to maintain the environment as such., • Safety Glasses are required, • May require area specific safety training, • This position works in a manufacturing environment. The noise level in the work environment is usually loud., • The employee is regularly exposed to moving mechanical parts and fumes or airborne paper particles., • May work at different workstations as production needs require, or shifts from one station to another, during the production process. Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. The standard schedule for this position is Monday through Friday, eight‑hour workdays. However, due to the high‑level leadership responsibilities of this role and the critical nature of our Machine Shop within our vertically integrated operations, additional hours may be required. Extended days, early starts, or late finishes may be necessary to support production demands, address urgent issues, or ensure departmental performance and schedule adherence. Compensation details: 130000-150000 Yearly Salary PIef5fc89f9664-26276-40148057

Imagine being able to meet your leader BEFORE applying! Click the following link to meet and hear from the leader about this specific role; MISSION This role exists to keep critical fleet assets safe, road-ready, and productive. Maintenance technicians are essential to ensuring trucks operate with maximum reliability and safety—supporting public health, environmental responsibility, and operational excellence. This is hands-on, high-impact work where your performance directly affects what gets done, when, and how safely. WHY THIS ROLE? WHY NOW? You won’t be a number on a spreadsheet. You’ll be a named, needed member of a tight-knit crew, where your work shows up in the real world every day. Shop leads still turn wrenches. Managers still walk the floor. And teammates still show up with grit, skill, and pride in the trucks they maintain. This team believes in training the willing—not filtering for perfection. If you bring the right hands, mindset, and heart for the work, they’ll invest in your growth with real training, real trust, and real opportunity. PERFORMANCE OBJECTIVES By day 30: * Complete onboarding and web-based safety/compliance training (Hydraulics 101, J1939 Diag, PPE, LOTO). * Shadow lead technician on preventive maintenance (PM) routines for front-loader and roll-off trucks. * Demonstrate understanding of shop layout, work order systems, and diagnostic tools (Allison, Cummins, Mack). By day 90: * Independently complete scheduled PMs and minor diagnostics on at least 2 truck types. * Support evening or off-shift maintenance schedules with minimal supervision. * Execute basic hydraulic troubleshooting and participate in vendor-led on-site training. By day 180: * Serve as a key responder for mechanical downtime within your yard assignment. * Maintain uptime standards across a small fleet section with 90%+ first-time fix rate. * Mentor new tech apprentices or junior techs on shop safety, tooling, and SOPs. FIT TRAITS * Hands-On Learner: You absorb knowledge by doing—and improving with every rep. * Culture Builder: You ask your teammates what they’re working on. You show up with respect, curiosity, and care. * Grit + Growth: Whether you’ve got two years or twenty, you push to learn what’s next. * Mission Aligned: You believe that clean communities and crew safety are worth the sweat. Requirements * Must have served in the U.S. Army, U.S. Navy, U.S. Marine Corps, U.S. Air Force, U.S. Coast Guard, U.S. Space Force, U.S. Reserves, or U.S. National Guard. * Baseline Skills: Mechanical aptitude, ability to read schematics, understanding of diesel systems. * Experience: Any of the following: * Military MOS in mechanical, aviation, diesel, or maintenance fields (e.g., 91B, 3521, 2T3X1). * Civilian experience in heavy equipment, diesel, or fleet maintenance. * Strong home/garage mechanical background + verifiable training or references. * Tools: Must own or acquire personal hand tools; quarterly tool reimbursement offered. * Certs (Preferred): CDL, DOT Brake Inspection, ASE certifications (not required to start). * Clearance: No clearance required; must be eligible to work in the U.S. * Physical: Ability to lift 50 lbs; bend, stoop, kneel; use lifts/jacks safely. Benefits BENEFITS * Salary of $25 - $40/hr * Monday - Friday role (rotating evening/weekend on call availability) * Tool Reimbursement Program – Quarterly tool upgrades encouraged. * Training Access – Vendor-led, instructor-led, and web-based technical certifications. * Career Mobility – Multiple technician paths: site leadership, operations, diagnostics. * People-First Culture – Tight-knit teams, real leadership access, no corporate red tape. * Work-Life Balance – Predictable shifts, off-the-clock respect, local transfers possible.

Job Description Role Description - Warehouse / Equipment Maintenance Coordinator Reports To: General Superintendent The Warehouse/Equipment Maintenance Coordinator is responsible for organizing, maintaining, and managing the logistics of company-owned tools, equipment, and job site materials. The ideal candidate takes pride in keeping things running smoothly, ensuring that all equipment is inventoried correctly, serviced, and readily available when and where it's needed. This hands-on role plays a key part in the success of our project teams. Key Responsibilities: · Inventory Management: o Maintain organized storage of all equipment, tools, parts, and jobsite supplies. o Keep inventory tracking logs accurate and up to date. o Ensure proper handling, storage, and security of materials both in the warehouse and at job sites. o Maintain and update a list of miscellaneous building hardware; distribute to project managers and site superintendents monthly. o Fulfill hardware requests by pulling and delivering parts to job sites, updating inventory logs accordingly. · Equipment Transport: o Pick up and deliver company-owned equipment between storage facilities and job sites as needed. o Ensure safe and secure transportation and set up of equipment and supplies. · Maintenance & Repairs: o Perform routine preventive maintenance (PM) on all company-owned equipment, including but not limited to: § Oil changes § Greasing equipment § Cleaning condenser coils on commercial dehumidifiers § Replacing belts, capacitors, and switches on commercial air movers (fans) o Maintain a detailed maintenance and repair log for each piece of equipment, tracking: § Preventive maintenance schedules and procedures § Dates and descriptions of work performed § Equipment location at time of maintenance (jobsite, warehouse, or repair shop) § Equipment readiness for job site use o Coordinate with outside repair centers for major repairs beyond in-house capabilities. Skills and Qualifications · Strong mechanical aptitude and troubleshooting skills · Intermediate knowledge of: o Gasoline and diesel engine systems o Basic equipment for electrical repairs (e.g., switches, capacitors) o Equipment plumbing (e.g., check valves, condensate pumps) · Ability to lift and move 70+ lbs. as needed · Comfortable working in remote or outdoor job site environments with limited access to utilities · Ability to work independently and follow through on assigned tasks without constant supervision · Strong organizational skills and attention to detail · Additional Requirements: o Valid driver’s license o Personal pickup truck or equivalent vehicle capable of hauling equipment; includes a truck allowance and fuel card o Responsible for supplying own hand tools; Christa will assess and provide any specialty tools as necessary · OSHA 10 certification required at time of hire · Work Environment: o Field-based travel throughout the central, northern, southern tier, and western NY o Fast-paced and dynamic work environment; candidates must be able to work at “Christa speed” – efficiently and proactively Hours between 16 - 24 Occasionally 30 Company DescriptionChrista has completed over $7.0 billion worth of construction throughout New York State. We have experience in the construction of multi-family, senior and student housing, commercial offices, municipality work, medical facilities, warehouses, hotels and restaurants. Whether you see our Christa sign in front of a housing complex, on a college or hospital campus, or in front of a major athletic stadium, our goal is always the same—to build value for our clients, the facility’s end users and the communities these buildings will serve. That’s been the way since 1982.Christa has completed over $7.0 billion worth of construction throughout New York State. We have experience in the construction of multi-family, senior and student housing, commercial offices, municipality work, medical facilities, warehouses, hotels and restaurants.\r\n\r\nWhether you see our Christa sign in front of a housing complex, on a college or hospital campus, or in front of a major athletic stadium, our goal is always the same—to build value for our clients, the facility’s end users and the communities these buildings will serve. That’s been the way since 1982.

Job Description ob Summary We are seeking a skilled Structural Steel Fabricator responsible for assembling, fitting, welding, and preparing structural steel components according to detailed shop drawings and engineering specifications. This role plays a key part in producing beams, columns, stairs, railings, and structural assemblies used in construction projects. Key Responsibilities • Fabricate structural steel components including beams, columns, stairs, and railings, • Fit-up and assemble steel parts using bolting and welding techniques, • Read and interpret blueprints, shop drawings, and fabrication plans, • Perform layout, measurement, cutting, and assembly of steel materials, • Operate hand tools, power tools, and fabrication equipment, • Assist with welding operations as required (MIG, Stick, or similar), • Move materials using overhead cranes and forklifts safely, • Prime and prepare finished steel products for shipment, • Load completed materials onto trucks for delivery, • Ensure all work meets quality and dimensional standards, • Maintain a clean and safe work environment Qualifications • Previous experience in structural steel fabrication or metal fabrication preferred, • Ability to read and interpret blueprints and technical drawings, • Basic welding knowledge and fabrication skills, • Strong attention to detail and accuracy, • Ability to work independently and as part of a team, • Experience with measuring tools and fabrication equipment Preferred Certifications • Forklift Operator Certification, • Overhead Crane Certification, • Welding certifications (AWS or equivalent), • OSHA 10 or OSHA 30 Safety Certification Physical Requirements • Ability to lift up to 50+ lbs regularly, • Standing, bending, and working in a shop environment, • Comfortable working around industrial equipment and machinery Why Join Us • Work on high-profile commercial and industrial steel projects, • Opportunities to grow your fabrication and welding skillset, • Stable employment with a reputable AISC-certified company, • Supportive, safety-first team environmentCompany DescriptionJoin Rochester Structural LLC, a leader in structural steel fabrication and erection with a strong legacy since 1982 and an AISC-certified fabrication facility in Rochester, NY. We are dedicated to quality, safety, and craftsmanship on every project — from industrial manufacturing and healthcare facilities to high-tech and commercial construction. Our team works with advanced CNC equipment and modern fabrication processes to deliver precision and excellence on every job.Join Rochester Structural LLC, a leader in structural steel fabrication and erection with a strong legacy since 1982 and an AISC-certified fabrication facility in Rochester, NY. We are dedicated to quality, safety, and craftsmanship on every project — from industrial manufacturing and healthcare facilities to high-tech and commercial construction. Our team works with advanced CNC equipment and modern fabrication processes to deliver precision and excellence on every job.

Job Locations US-NY-Rochester ID 2025-5961 Category Service / Technician Type FT Non-Union (FTN) Milton Rents (a division of Milton CAT) is seeking an Equipment Service Technician to perform preventative maintenance on a variety of equipment, and to inspect, diagnose and repair damaged rental equipment to correct working order. Milton Rents offers challenging career opportunities, extensive training and employee development along with an opportunity to grow your career and thrive under our reputation for excellence. Whether you're looking for a steady job with great benefits, or an exciting place to start your career and grow within the organization, Milton CAT can meet your needs! We offer excellent benefits and supply you with the tools you need to maximize your potential. Pay Range: $22.00-$30.80 per hour depending on experience. Benefits include: Paid Time Off + 8 company paid holidays • Medical, Dental and Vision insurance options for Employee and Family, • Disability & Life Insurance Packages, • Competitive Retirement Plan, • Tuition Reimbursement - available to FT employees with 1 year+ of service, • Additional supplemental offerings and discount programs, • Employee Referral Program, • Inspect, service, and repair a wide variety of construction rental equipment to correct working order. Repairs may be done in the shop or in the field. When in the field repairs are required, a company service truck will be provided and used., • Perform rental check-ins, safety checks, and inspections as per company guidelines assuring equipment is Rent Ready, • Diagnose and repair hydraulic systems, electrical systems, drive components, and typical mechanical failures., • Exhibit positive and effective interaction with customers, fellow employees, management and equipment manufacturers., • Uphold safety practices and standards, • Maintain accurate records as it relates to repair orders, parts ordering, and time keeping., • Must be both efficient and thorough with all repairs and rental check-in., • Maintain a clean work area and keep tools in proper working condition., • Maintain and wear all required Personal Protective Equipment (PPE), • Complete and submit all paperwork required by shop management in the requested timeframes., • High-school diploma or GED is required, • Experience as a rental equipment mechanic or a similar role in the repair industry is desired., • Knowledge of safe operation of Construction Rental Equipment., • Good written and verbal communication skills., • Strong Mechanical aptitude and troubleshooting skills; proficient in mechanical systems (transmissions, engines, hydraulics, etc.), • Able to lift 30 lbs regularly, and occasionally up to 80 pounds independently or with assistance., • Must have a valid driver's license and maintain a safe driving record. This job description is not intended to be all-inclusive. Your supervisor may request and assign similar duties. Resumes that are mailed, emailed or hand-delivered to Milton CAT or any employee will not be considered. You must apply online. A background check and drug test are required as part of our pre-employment process. Milton CAT is an equal opportunity employer that values the strength diversity brings to the workplace. We encourage applications from individuals with disabilities, minorities, veterans, and women. Applicants receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, sexual orientation, gender identity, handicap, disability, veteran status, genetic data, or other legally protected status. We base all employment decisions to further this principle of equal employment opportunity. VEVRAA Federal Contractor. EEO/AA employer. Milton CAT is a Drug-Free workplace. Keyword: equipment, diesel, technician, mechanic, aerial lift, boom, heavy equipment, small engine, hydraulic, rental

Job Locations US-NY-Rochester ID 2026-6091 Category Service / Technician Type FT Non-Union (FTN) Milton Rents NY (a division of Milton CAT) is seeking an experienced Field Service Technician to perform repairs and preventive maintenance on construction rental equipment within Rochester NY and the surrounding areas. Experienced technicians will inspect, diagnose, repair, and service rental equipment to correct working order. Milton Rents offers challenging career opportunities, extensive training, and employee development along with an opportunity to grow your career and thrive under our reputation for excellence. Whether you're looking for a steady job with great benefits, or an exciting place to start your career and grow within the organization, Milton Rents can meet your needs! We offer excellent benefits and supply you with the tools you need to maximize your potential. Pay Range: $27.50 - $37.50 per hour. This is a Field position. Benefits include: Paid Time Off + 8 company paid holidays. • Medical, Dental and Vision insurance options for Employee and Family, • Disability & Life Insurance Packages, • Competitive Salary with 401K Match, • Tuition Reimbursement - available to FT employees with 1 year+ of service, • Additional supplemental offerings and discount programs, • Employee Referral Program, • Company provided Service Truck, • Company laptop and diagnostic software, • Inspect, service, and repair a wide variety of rental equipment in the field ensuring that units are operating as per Milton Rents and OEM standards & specifications, • Diagnose, service and repair hydraulic systems, electrical systems, drive components, diesel engines, and other mechanical systems., • Reports daily to the service manager and branch manager with workflow and schedule., • Ability to be dispatched from remote locations or from home base., • Must be a self-starter and have the ability to work in remote areas., • Extensive experience with construction rental equipment or heavy machinery., • Positively and effectively interact with customers, fellow employees, management, and equipment manufacturers., • Uphold safety practices and standards as set forth by Milton Rents & Milton CAT, • Works in the local shop environment when not on the road., • Maintain accurate records as it relates to repair orders, parts ordering, and time keeping., • Be efficient and thorough with all repairs and rental check-in., • Maintain a clean, organized, and stocked service truck., • Maintain and wear all required Personal Protective Equipment (PPE)., • Complete and submit all paperwork required by shop management in the requested timeframes., • High-school diploma or GED is required., • 5+ years of verifiable experience in the construction rental or heavy equipment industry preferred., • Valid Driver License with Valid medical card or ability to pass a DOT physical exam., • Knowledge of safe operation of Construction Rental Equipment., • Able to work indoors, outdoors, and longer hours (which includes OT) in various weather conditions., • Good written and verbal communication skills., • Strong computers skills., • Strong mechanical aptitude and troubleshooting skills; proficient in mechanical systems (transmissions, engines, hydraulics, etc.), • Able to lift 30 lbs. regularly, and occasionally up to 80 pounds independently or with assistance., • Must have own tools. This job description is not intended to be all-inclusive. Your supervisor may request and assign similar duties. Resumes that are mailed, emailed or hand-delivered to Milton CAT or any employee will not be considered. You must apply online. A background check and drug test are required as part of our pre-employment process. Milton CAT is an equal opportunity employer that values the strength diversity brings to the workplace. We encourage applications from individuals with disabilities, minorities, veterans, and women. Applicants receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, sexual orientation, gender identity, handicap, disability, veteran status, genetic data, or other legally protected status. We base all employment decisions to further this principle of equal employment opportunity. VEVRAA Federal Contractor. EEO/AA employer. Milton CAT is a Drug-Free workplace.

Job DescriptionPower-Flo Technologies has the capabilities of an electrical products distributor, manufacturer, and service organization all rolled into one. We are looking for you to join our collaborative team as a Panel Technician Helper at our Rochester location. Panel Technician Helper Primary Function : The Panel Technician Helper will be trained to build custom control panels. In this position you will work with experienced technicians to learn: • Basic electrical theory, • To read and interpret electrical schematics, mechanical drawings, and technical manuals, • Mechanically layout and mount hardware components, • Wire complete panel in accordance with PFT panel procedures, UL508A specifications, and other best practices as given by the panel shop supervisor, • The use of hand tools, i.e. jigsaw, drills, wrenches, screwdrivers, • The use of electrical test equipment, i.e. Multi meter, • Torque check and marking in accordance with PFT procedures, • Test Custom Industrial Control Panels and OEM Products, • Point to Point wire tests in accordance with PFT testing procedures Along with acquiring technical knowledge, you will be responsible for the following: • Accounting for parts required for the job, • Maintaining a neat and orderly work area at all times, • Organizing and maintaining shop tools and equipment, • Organizing and maintaining personal tools, • Organizing and maintaining your project items and materials, • Help maintain common shop supplies IE Labels, wire ties, wire, etc. Panel Technician Helper Qualifications : • Previous experience, training, or schooling in electrical work, • Familiarity with electrical equipment and hand tools and other power tools, • Willingness to learn, • Current, valid, and clean NYS driver's license to operate company vehicles as needed Physical Requirements: • Ability to stand for up to 8 Hours, • Ability to lift 50 pounds, • Ability to work on elevated platforms, • Ability to climb ladders, • This position may require standing, stooping, bending, kneeling, crouching and/or reaching, • You may be exposed to dust, loud noises, and hot and cold conditions, • Good hand-eye coordination and fine motor skills may be required for hand tools, power tools, and other machinery Full-time, Monday - Friday, on-site. Candidates need a clean and valid driver's license to operate company vehicles. $16 - $18/hour Competitive Benefits Package • Health insurance (medical, dental, vision), • PTO program and paid holidays, • 401K, • ESOP (Employee Stock Ownership Plan) About Us We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description Our client is a precision aerospace manufacturer producing CNC-machined components for mission-critical aerospace and defense applications. Our work requires accuracy, consistency, and compliance with AS9100 and NADCAP standards. We are looking for skilled CNC Setup Machinists to prepare, program, and set up production jobs on advanced CNC equipment. Position Overview: The CNC Setup Machinist is responsible for preparing CNC Mill/Lathe/Turn machines, fixtures, tools, and programs so production can run smoothly and accurately. Responsible for installing tooling, setting up fixtures, loading programs, and running first-article inspections. This role ensures the machining process is stable, accurate, and then handing off to CNC Operators for production runs so production can run smoothly and accurately. Key Responsibilities: • Read and interpret engineering drawings, blueprints, and GD&T specifications., • Select, install, and align tooling, fixtures, and work-holding for CNC mills, lathes, grinders, or multi-axis machines., • Troubleshoots dimensional issues, surface finishes, or machining strategies., • Perform tool offsets, machine zeroing, probing cycles, and setup adjustments to achieve tight tolerances., • Run first-article parts, perform full inspections, and verify dimensional accuracy using micrometers, calipers, CMMs, and gages., • Troubleshooting machine issues such as tool wear, chatter, surface finish, or dimensional drift., • Select and install tooling, work-holding fixtures, and gages for a new job., • Document setup sheets and update process records for repeatability., • Train and collaborate with CNC Operators to ensure smooth production hand-off. Requirements • High school diploma or GED required; technical/trade school or apprenticeship preferred., • 3+ years of CNC setup experience in a precision machining environment, required. (aerospace/defense industry experience, strongly preferred)., • Proficiency in reading complex engineering blueprints and GD&T., • Strong knowledge of cutting tools, feeds/speeds, and machining strategies, materials (aluminum, titanium, Inconel, stainless steel)., • Hands-on experience with CNC controls (Fanuc, Mazak, Haas, Okuma, etc.), desired., • Knowledge of CNC Mill/Lathe/Turn, CNC Grinders, Wire EDM, (3-5 Multi-Axis) Machines, vertical and horizontal, preferred. Willing to train., • Knowledge of machining theory, materials (Inconel, titanium, aluminum alloys, tooling, and GD&T, required., • Ability to perform and document first-article inspections., • Strong troubleshooting, mechanical aptitude, and problem-solving skills. Preferred Qualifications: • Experience with CAD/CAM software (Mastercam, GibbsCAM, or similar)., • Familiarity with lean manufacturing and continuous improvement practices., • Previous work in an AS9100 certified aerospace/defense shop., • Leadership ability to train and mentor CNC Operators.Company DescriptionWe’re Infinia Search. We’re a relationship-driven search firm that proves that talent, ambition, curiosity, and an infinite work ethic creates exponential results for our clients and candidates.We’re Infinia Search. We’re a relationship-driven search firm that proves that talent, ambition, curiosity, and an infinite work ethic creates exponential results for our clients and candidates.

Job Description With over 50 years of excellence, Precise Tool & Manufacturing Inc. is a family-owned, Rochester-based leader in advanced CNC machining and custom manufacturing. Our 280,000 sq. ft. facility houses more than 160 CNC machines, including vertical turning lathes, horizontal boring mills, high-speed 5-axis machines, and more! We proudly support industries such as aerospace, defense, medical, energy, and power generation with a commitment to quality and innovation. At Precise Tool, we offer competitive pay, comprehensive benefits, and a collaborative work environment built on respect, teamwork, and long-term stability. Interested in joining our team? Apply today! JOB SUMMARY Under the direct supervision of the Engineering Manager, the Process Engineer is responsible for performing a variety of manufacturing processes and engineering functions. ESSENTIAL FUNCTIONS: • Write manufacturing processes and enter in Epicor software. Work with the engineering group on machine processes and tooling., • Interface with department supervisors and machinists on a regular basis., • Utilize customer supplied CAD files when available to process manufacturing plan., • Utilize CAD to create work holding and fixturing layouts., • Interface with CNC programmers., • Notify Tool Crib of upcoming jobs., • Develop queuing system for kits ready to set up., • Verify tooling is available for jobs and ensure back-ups are available., • Coordinate all projects as they progress through the shop., • Monitor profitability as jobs are running., • Expedite any materials and components for jobs to ensure jobs stay on schedule., • Complete routing for customer jobs., • Work with engineering group and manufacturing to develop tooling and fixturing concepts for all new work., • Update all processes during and after production., • Work with manufacturing to ensure processes are being followed, and to incorporate time saving methods when suggested., • Investigate and provide disposition on discrepant/quality issues for jobs assigned., • Review assigned jobs with department manager at hand-off and when ready to move to the floor., • With a quality work ethic, functions as a member of a customer-driven quality team whose goal is to ensure that product quality requirements established by the customer have been achieved., • Holds oneself accountable for doing whatever is needed to meet the commitments made around project outcomes., • Excellent written and oral communication skills., • Ability to work well under pressure, to adhere to deadlines and the ability to be flexible., • Familiarity with all aspects of manufacturing including material specifications, turning, milling, heat treat, welding, plating and painting., • Attention to detail., • Customer focus., • Analytical and reasoning skills., • Proficiency with 3-D modeling software packages, Autodesk Inventor., • High School Diploma or equivalent required, • College degree preferred, but not required, • 10 years of machining or manufacturing experience required, • Vacation, • Sick Days, • Paid Holidays, • Health Insurance, one plan is 100% employer paid!, • Dental Insurance, • Vision Insurance, • Life Insurance, also 100% employer paid!, • 401(k) Plan According to the New York Pay Transparency law, pay range for this job is $29.00 - $43.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Precise Tool & Manufacturing Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Precise Tool & Manufacturing Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources at (585) 247-0700 Ext. 203.

Job DescriptionCompany Description Founded in 1978, California Closets has built a reputation as the leader and design authority in premium space management, delivering custom-designed organizational solutions and exceptional service. We believe home is more than just a place — it should be a source of creativity, comfort, and connection. From beautiful walk-in closets and entertainment centers to versatile pantries and home offices, we design custom storage solutions that add value to your life and home by making space for what belongs. Think of it as ‘practical magic.’ Job Description The field Installation installs custom designed residential storage systems and accessories using a variety of luxury materials. A successful candidate will have experience with hand and power tools, measurements and the ability to provide exceptional customer service to our clients. What We Offer: California Closets has both company-owned and franchise locations. This location is company-owned, therefore earns the following benefits: • Health insurance – Medical, Dental, and Vision, • PTO days and paid holidays, • 401K retirement plan with company match, • Transporation from Company’s location to and from customer job sites will be provided, • Company tools and PPE provided, • Guaranteed 40 hours/week with overtime potential, • Day shift hours, • Grow your career with us – many promotional opportunities available Duties and Responsibilities: • Perform skilled and semi-skilled carpentry work to install custom storage systems such as closets, cabinets, offices, and other spaces in the home or commercial buildings., • Utilize company-provided CAD drawings\blueprints to install systems properly and efficiently., • Assemble and install systems of varying complexity., • Assists in the removal and installation of materials in customer homes., • Maintain shop tools and equipment in safe working order (tools are provided)., • Install systems independently or with team members depending on the size of the job., • Provide a high level of customer service for in-home installations., • Maintain safety standards at all time., • Responsible for driving to and from customer sites and operating a company-provided vehicles in a safe manner., • Perform other duties and responsibilities as assigned by the supervisor.Qualifications, • Must maintain a valid driver's license and clean driving record, • High School diploma or equivalent, • Experience with common hand and power tools, • Trade or vocational school experience desirable, • Cabinetry or carpentry skills desirable, • Strong verbal and written communication and listening skills, • Able to walk, lift 50 pounds, reach, stoop, stand, grasp, balance, climb stairs, kneel, and crouch Additional Information Find us on Facebook, YouTube, and Instagram We are an equal opportunity employer. We E-Verify. All your information will be kept confidential according to EEO guidelines. Privacy Policy: Terms and Conditions:

Job Description Power-Flo Technologies is seeking a Panel Technician to join our Rochester Panel Shop. Panel Technician Primary Functions • Build and wire custom industrial control panels as well as OEM products as assigned by the Panel Shop Supervisor, within schedule provided in both time and date., • Maintain a neat and orderly work area at all times. Panel Technician Essential Responsibilities • Build Custom Industrial Panels and OEM products meeting delivery dates, • Work independently with the project folder and design schematics to complete your responsible job., • Account for parts required for the job, • Mechanically layout and mount hardware components., • Wire complete panel in accordance with PFT panel procedures, UL508A specifications, and other best practices as given by the panel shop supervisor., • In large project situations work with other technicians in a team effort, • Test Custom Industrial Control Panels and OEM Products, • Point to Point wire tests in accordance with PFT testing procedures, • Torque check and marking in accordance with PFT procedures, • Be able to perform and fill out the PFT Panel Final Check list, • Maintain a neat and orderly work area at all times, • Organize and maintain shop tools and equipment, • Organize and maintain personal tools, • Organize and maintain your project items and materials, • Help maintain common shop supplies IE Labels, wire ties, wire, etc., • Assist Apprentices and other Technicians in techniques and procedures Panel Technician Necessary Qualifications • Basic Knowledge of Electrical Theory, • BOCES Electrical or AS in an Electrical Technology Field preferred, • Ability to read and interpret electrical schematics and mechanical drawings, • Must be able to follow and understand the PFT Shop Guidelines, • Ability to read and interpret technical manuals, • Ability to work with other Technicians and Apprentices in a professional manor, • Competent with the use of hand tools, i.e. jigsaw, drills, wrenches, screwdrivers, • Competent with the use of electrical test equipment, i.e. Multi meter, • Valid and Clean Driver's License Physical Requirements • Ability to stand for up to 8 Hours, • Ability to lift 50 pounds, • Ability to work on elevated platforms, • Ability to climb ladders, • This position may require standing, stooping, bending, kneeling, crouching and/or reaching, • You may be exposed to dust, loud noises, and hot and cold conditions, • Good hand-eye coordination and fine motor skills may be required for hand tools, power tools, and other machinery Full-time, on-site. Candidates need a clean and valid driver's license to operate company vehicles. $18 - $22/hour Competitive Benefits Package • Health insurance (medical, dental, vision), • PTO program and paid holidays, • EAP, • 401K, • ESOP (Employee Stock Ownership Plan) We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job DescriptionDescription: Where Precision Meets Possibility We don't just make parts - we craft perfection down to the micron. At Addison Precision Manufacturing, we're the masterminds behind the components that power aerospace innovations, advance medical breakthroughs, and drive manufacturing excellence. Our arsenal? State-of-the-art technology and advanced machinery paired with unmatched expertise that set industry standards in precision machining. We're not your average manufacturing facility. We're a team of precision perfectionists who: Transform raw materials into aerospace marvels, create components that save lives in medical devices, set the gold standard in manufacturing excellence and deliver quality that keeps our clients coming back. If you believe that 'good enough' isn't good enough, and precision is your passion, you might just be who we're looking for. Join us in shaping the future of precision manufacturing - where every thousandth of an inch matters, and excellence isn't just a goal, it's our standard operating procedure. Position Summary We are seeking a skilled Quality Engineer to drive quality excellence through process improvement, quality system management, and engineering solutions. This role combines technical expertise with leadership to ensure product quality, maintain compliance standards, and foster a culture of continuous improvement across the organization. This hands-on role requires significant shop floor presence, working directly with inspectors and operators to ensure quality standards are maintained in real-time. The ideal candidate must be comfortable balancing theoretical quality principles with practical, day-to-day production support. Key Responsibilities: • Maintain an active floor presence throughout production areas and work directly with quality personnel to resolve quality issues in real-time., • Guide operators through complex inspection requirements and troubleshoot quality issues on the spot., • Collaborate with customers to complete source inspections., • Support production with immediate quality decisions., • Ensure proper use of inspection equipment and validate inspection methods in real production conditions., • Assist quality leadership personnel with auditing company policies, procedures, and systems that affect product quality to assure compliance with the company’s quality system and good manufacturing processes., • Establish and implement product and process quality standards while remaining in compliance with ISO9001, AS9100 and NADCAP requirements., • Lead INCR/NCR investigations., • Complete analysis on incoming products and approve all product receipts., • Inspect and test materials, equipment, processes, and products to ensure quality specifications are met., • Develop user-friendly inspection documentation for operators, such as visual aids and inspection guidelines., • Develop First Article Inspection (FAI) documentation and procedures., • Maintain inspection documentation system and update inspection procedures., • Specify and order appropriate inspection gauges and develop gauge control and calibration requirements., • Identify customer flow down requirements., • Collaborate with operations managers on process control development., • Develop, implement, and validate corrective actions for quality issues to prevent issue recurrence. What We Offer • Competitive salary based on experience, • Career development opportunities, • Climate-controlled work environment, • State-of-the-art machinery and equipment Benefits: • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Bachelor’s degree in engineering, Manufacturing, or related technical field with 3+ years quality engineering experience OR associate’s degree in related technical field with 5+ years of progressive quality experience in manufacturing and comprehensive understanding of quality principles., • Demonstrated proficiency in GD&T and blueprint reading., • Experience with measurement equipment and gauging systems., • Practical knowledge of SPC and quality tools., • Understanding of ISO 9001, AS9001 and NADCAP quality systems., • Background in manufacturing environment – precision machining or aerospace highly preferred., • High proficiency in computer technology and systems operations., • Strong analytical and problem-solving skills couples with an attention to detail. Environment & Physical Demands • Regularly required to stand, walk, stoop, kneel, crouch, and communicate effectively (talk/hear)., • May involve prolonged periods of both sitting and standing depending on task requirements., • Specific vision abilities include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus; prolonged magnified inspection may be required, which can lead to eye strain., • Requires good hand-eye coordination and dexterity in hands, arms, and fingers, including the ability to grasp and manipulate small components., • Frequent use of computers and other standard office or manufacturing equipment., • May involve handling of oils, solvents, and cleaning solutions—lab coats provided to minimize exposure., • Typically performed in a clean environment; employees are expected to help maintain cleanliness standards., • Safety glasses are required at all times; additional safety training may be required depending on the area., • The work is performed in a manufacturing setting where noise levels are generally loud., • May rotate between different workstations or shift tasks during the production process based on operational needs.

Job Description Position Overview Job Title: Diesel Mechanic / Reefer Technician Employment Type: Full-Time Work Environment: Shop Schedule / Shift • 1st Shift (Day Shift) Available, • 2nd Shift: 2:00 PM – 10:30 PM, • $1/hour shift differential for 2nd shift Overtime Moderate overtime available when needed, but the shop does not typically run excessive 60–70 hour work weeks. Responsibilities • Perform preventative maintenance and repairs on Class 6–8 diesel trucks, • Diagnose and repair diesel engines, drivetrains, and electrical systems, • Perform general reconditioning and maintenance on refrigerated vehicles, • Diagnose and repair refrigeration units (Thermo King / Carrier style systems), • Complete inspections, yard checks, and general shop repairs Qualifications • 3+ years of diesel mechanic experience working on Class 6–8 trucks, • Strong mechanical and electrical diagnostic ability, • Experience with preventative maintenance and heavy truck repair, • Reefer experience is a plus but not required (training available), • Must provide own standard mechanic hand tools Licensing • Valid driver’s license required, • CDL preferred but not mandatory (company may assist in obtaining one) Compensation Hourly Pay: $25 – $38 per hour (depending on experience) The company is flexible on pay for the right candidate. Benefits • Medical benefits through Cigna (3 plan options), • 401(k) with 3% company match, • Paid vacation and PTO (negotiable depending on experience), • Company-provided uniforms, • Online training and development opportunities Work Environment • Team-oriented shop during day shift, • Support from Service Manager and other technicians, • Stable company with long-term growth opportunities, • Opportunity to learn refrigeration systems if you currently specialize in diesel Company DescriptionWe work with you to ensure the job fits what you are looking for. We will also help you build an awesome resume.We work with you to ensure the job fits what you are looking for. We will also help you build an awesome resume.

Job Description Trailer Service Mechanic Brad’s of New York – Rochester, NY Full-Time | $16–$28 per hour + Benefits Brad’s of New York is looking for a dependable Trailer Service Mechanic to join our team in Rochester, NY. This role focuses primarily on trailer maintenance and basic repairs, including tires, brakes, lighting, and general service work. If you enjoy working with your hands, solving mechanical problems, and being part of a reliable service team, this is a great opportunity to build a long-term career. What You’ll Do * Install and repair trailer tires and wheels * Service and replace trailer brake systems * Diagnose and repair trailer lighting and wiring issues * Perform basic trailer maintenance and safety inspections * Replace parts such as hubs, bearings, lights, wiring, and couplers * Use shop tools and equipment safely and efficiently * Ensure trailers meet road safety and compliance standards * Maintain a clean and organized work area What We’re Looking For * Mechanical or hands-on experience (automotive, trailers, equipment, or similar) * Comfortable using hand tools and shop equipment * Ability to troubleshoot basic mechanical or electrical issues * Strong work ethic and reliability * Ability to lift up to 50 lbs and work on your feet throughout the day * Willingness to learn trailer-specific repairs Pay & Benefits * $16–$28 per hour (based on experience) * Health and dental insurance * Paid time off * 401(k) retirement plan * Stable full-time schedule * Opportunity to grow your mechanical skills

Job Description Shift: At Veo, we are on a mission to end car dependency by making clean transportation accessible to all and advancing the next generation of fully electric micromobility systems. Our fleets are constantly evolving and feature a range of vehicles - from pedal and electric bicycles, to standing and seated e-scooters, e-cargo bikes, and ADA accessible devices. We design and build our own vehicles, hardware, and software systems in house and run all our local operations to provide safe, efficient, and responsive mobility services that make communities more sustainable and livable. We are looking for exceptionally talented individuals who are ready to develop and implement new solutions to these exciting challenges. We are headquartered in Santa Monica, CA, but are hiring across the U.S. Join us! Responsibilities: • Support the Operations Manager with the day-to-day responsibilities in the market, • 60-80% of your time will be hands-on, manual work to include:, • Direct labor and warehouse organization, • Hand-count assets and compliance audits, • Perform routine inspection and maintenance of vehicles, • Respond to on-demand and in the field customer service requests, • Redistribute scooters around Veo's service areas, • Identify, document and recover scooters requiring in-shop repair, • Ad-hoc field tasks and other tasks as required, • 20-40% of your time will consist of a variety of administrative work to include:, • Support Operations Manager with hiring, training, scheduling staff, • Employee productivity tracking, • SOP follow-up, • Assist Operations Manager with other projects as needed Qualifications & Skills: • Basic mechanical and technical aptitude, • 1 year of leadership or supervisory experience, • A valid driver's license, • Ability to lift up to 60 lbs and be on your feet for the entirety of a shift, • Knowledge of the local geography and street layout, • Clear, effective communication, • Eligible to work in the United States Perks: • Opportunity to work in a fast-paced, early stage technology company, • VeoRide credits, • Medical/dental/vision coverage #VEO2026 Below is the expected salary range for this position. The listed range is a good faith estimate, and exact compensation and total package may vary depending on market conditions and candidate qualifications.Pay Range $23—$24 USD

Job DescriptionIn 2018, the franchise changed hands. Under new management and looking to grow! We are looking for motivated individuals who desire a career in the plumbing trade. We have changed the way we run our shop. We are eager to accommodate our growing work force! The Plumbing Service Technician is key member of our team, performing service work on plumbing systems in commercial and residential environments. Exemplifying our code of values, you show respect and courtesy to all customers and employees. Ideally you have prior experience in the plumbing industry and have proven communication skills with supervisors, employees, and customers. You are self-motivated, thrive in fast moving environments, and able to manage time to effectively meet deadlines. Specific Responsibilities: • Install repair and maintain plumbing systems in commercial and residential environments, • Perform drain cleaning on plumbing systems, • Perform minor to complex service work on plumbing systems, • Work with blueprints and job specifications as it applies to the craft, • Identity proper materials and quantities for new and existing projects, • Keep company vehicle and equipment properly serviced, clean, and in good working order and condition, • Understanding the Plumbing CodeJob Requirements:, • Licensed or possessing prior verifiable plumbing experience (minimum 2 years), • Valid Driver's License, • Ability to operate basic hand tools necessary for the craft, • Attention to detail, • Excellent communication skills, • Professional appearance and personalityBenefits:, • Signing Bonus!, • PTO, • Team Outings, • Flexible Hours, • Holiday Pay, • Health Benefits, • IRA/401k + Match, • Tuition Reimbursement, • Tool Purchase Account, • Company Uniforms/ApparelWe are actively interviewing for this position - Apply today and our hiring manager will follow up!

Job Description DRT Aerospace is committed to be the leader in machined components for the Aerospace industries by providing quality precision components and superior support – utilizing a skilled workforce, innovative technology, and sophisticated systems. Our location in Rochester, NY is currently seeking excellent candidates for: Quality Inspector - 1st Shift Job Description You will be responsible for performing dimensional and visual inspections and the associated quality reports on castings, machined metal and plastic parts for workmanship and conformance to design documentation in 2d or 3D format. Requirements are to be interpreted from design / process drawings, procedures and specifications. Data analyzed from these inspection operations are documented in quality and nonconformance reports. Responsible for ensuring product meets customer requirements. RESPONSIBILITIES: • Maintain quality departmental documentation, in written and computer formats, supporting inspection, certification reviews and nonconformance reporting. • Using CMM and/or hand devices such as verniers, calipers, micrometers, gauge pins, height gauges, fixtures, etc. performs first article and first piece inspection as appropriate of castings, machined metal and of complex geometries using customer supplied prints and some CAD interpretation. • Performs close tolerance dimensional checks using high complexity prints and a thorough knowledge of GD&T, • Independently sets-up and operates CMM for complex parts and programs CMMs for repeated inspection of parts as required, • Completes 100% inspection reports on 1st piece machined parts, • Exercises independent judgment to determine methods for inspection technique and maintains part inspection programs to assure they are to current print requirements • Assists in engineering, transfers mark-up and creates inspection strategies when required, • Meets quality and quantity standards for the position, • Documents actions by completing production routers and Inspection Methods Sheets EDUCATION and/or EXPERIENCE: High school diploma or equivalent with experience OR associate's degree Working knowledge of GD&T, AS9102 FAIRs, and all facets of inspection measuring equipment Previous experience as Quality Inspector or DQR in an Aerospace manufacturing environment a plus Strong communication skills, ability to work on a team, and attention to detail Demonstrated proficiency in Microsoft Office products, related business applications and office equipment PREFERRED QUALIFICATIONS: Associate's degree or equivalent knowledge to obtain expertise in departmental inspection equipment, and processes, and other Quality objectives 5+ years' Aerospace inspection in a machine shop environment Familiarity with Process Improvement

Job Description Company Information: Regional Transit Service (RTS) is a regional transit authority established by New York State with more than 1,000 employees who proudly serve customers and business partners in Monroe, Genesee, Livingston, Ontario, Orleans, Seneca, Wayne, and Wyoming counties. Recognized as one of the best-run transit systems in the nation, RTS partners with the community it serves to provide vital, safe, and sustainable transportation services to nearly 8 million people each year. We carry out our mission by connecting our customers to jobs, school, healthcare, shopping, and recreational activities every day. OVERVIEW: The Master Electrician is primarily responsible for the maintenance and installation of facilities electrical distribution systems and associated electrical equipment. The candidate will be responsible for repairs and improvements to electrical service and devices at RTS facilities in accordance with all appropriate codes and regulations. Secondary responsibilities include performing major and routine repairs typically encountered in maintaining building and shop equipment at a mass-transit facility. The candidate must also demonstrate a level of competency in the general building trades, including carpentry, plumbing, masonry, concrete finishing, and miscellaneous remodeling. The successful candidate will be assigned to complete all tasks within the scope of RGRTA/RTS Buildings and Grounds mechanical work. COMPENSATION: $41.48per hour Tentative Work Hours: Monday Friday, 6:00 AM 2:30 PM Why you should join the RTS Team! • Consistent weekly pay, • Career Longevity and opportunities for growth, • Work/life balance."Work to live, not live to work.", • Job security. Public Transportation is a long-term solution to climate change policy., • Cutting-edge internal technical training department. We support you., • Vehicles contain the latest technology. We provide the tools and equipment to help you succeed., • Collaborative and positive work environment with a culture that promotes your success. We focus on making you the best version of yourself! Other great benefits include: • Excellent HealthBenefits Medical, Dental, Vision, • Top compensation and pension plan, • Work boot & tool allowance, • On-site 24/7Fitness and Wellness Center, • Deferred Compensation, • Employee Assistance Program (Counseling, Health Advocacy, Financial & Legal Consultation, Health Coaching, Virtual Concierge, Discounts), • Well-Being Program ESSENTIAL FUNCTIONS: • Connect wires to circuit breakers, transformers, or othercomponents., • Inspect electrical systems, equipment, and components to identify hazards, defects, and the need for adjustment or repair, and to ensure compliance withcodes., • Advise management on whether continued operation of equipment could behazardous., • Test electrical systems and continuity of circuits in electrical wiring, equipment, and fixtures, using testing devices such as ohmmeters, voltmeters, and oscilloscopes, to ensure compatibility and safety ofsystem., • Plan layout and installation of electrical wiring, equipment and fixtures, based on job specifications and localcodes., • Prepare sketches or follow blueprints to determine the location of wiring and equipment and to ensure conformance to building and safetycodes., • Use a variety of tools and equipment such as power construction equipment, measuring devices, power tools, and testing equipment including oscilloscopes, ammeters, and testlamps., • Install ground leads and connect power cables to equipment, such asmotors., • Repair or replace wiring, equipment, and fixtures, using hand tools and powertools., • Work from ladders, scaffolds, powered lifts, and roofs to install, maintain or repair electrical wiring, equipment, andfixtures., • Place conduit (pipes or tubing) inside designated partitions, walls, or other concealed areas, and pull insulated wires or cables through the conduit to complete circuits betweenboxes., • Fasten small metal or plastic boxes to walls to house electrical switches oroutlets., • Perform physically demanding tasks, such as digging trenches to lay conduit and moving and lifting heavyobjects. REQUIREMENTS: • Must have a full set of tools to perform all jobsassigned., • Must be able to lift at least 75 lbs., • A valid NYS driver's license and clean driving record required., • Must obtain a New York State CDL Class Bpermitwith passenger and air brake endorsement prior to start date., • Current license as a Master Electrician (Three-phase) issued by the City of Rochester Electrical Examining Board EDUCATION & EXPERIENCE: • High School Diploma or Equivalent (GED), • Candidate must have met all requirements as listed above. KNOWLEDGE, SKILLS, & ABILITIES: • The ability to assemble, install, test, and maintain electrical or electronic wiring, equipment, appliances, apparatus, and fixtures, using hand tools and power tools, • The ability to diagnose malfunctioning systems, apparatus, and components, using test equipment and hand tools, to locate the cause of a breakdown and correct the problem, • Proficient computer skills, including basic Microsoft Office, Trapeze EAM, Adobe Acrobat Reader, • Excellent verbal and communication skills, • Strong time management skills PHYSICAL DEMANDS AND WORK ENVIRONMENT: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk and hear.The employee frequently is required to stand, walk, use hands to finger, handle, or feel and reach with hands and arms.The employee is occasionally required to sit, climb, or balance and stoop, kneel, crouch or crawl.The employee must frequently lift and/or move up to 20 pounds and occasionally lift and/or move up to 75 pounds.Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.While performing the duties of this job, the employee frequently works in outside weather conditions.The employee is occasionally exposed to wet and/or humid conditions, fumes, or airborne particles, toxic or caustic chemicals and vibration.The employee works near moving mechanical parts.The employee is occasionally exposed to risks. The noise level in the work environment is usually moderate to loud. Additional Information: Rochester Genesee Regional Transportation Authority (RGRTA) has a zero-tolerance drug and alcohol policy for all employees in accordance with state and federal law. All internal and external applicants will be required to undergo drug testing before employment and will be subject to further drug and/or alcohol testing throughout their employment in accordance with the Department of Transportation (DOT) and the Federal Transit Administration (FTA) regulatory requirements. Rochester Genesee Regional Transportation Authority (RGRTA) is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship and/or immigration status, sex, sexual orientation, gender identity, pregnancy, age, veteran status, disability, genetic information, or any other protected characteristic under applicable federal or state law. RGRTAwill make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. Pursuant to Federal Transit Administration regulations, all applicants for employment in safety-sensitive positions must be given a pre-employment drug test. An applicant may not be assigned safety-sensitive functions unless the individual has a verified negative test result. RTS is required by law to test for various substances, including cocaine, amphetamines, opioids, PCP and marijuana metabolites. Please be advised that marijuana stays in the system for an extended period of time, sometimes more than 30 days, and can cause a positive test result long after use.