Trabajos siemens en Elizabeth, New JerseyCrear alertas

Senior Controls Engineer - Springfield, NJ A growing automation systems integrator specialising in custom machine building and full systems integration is looking for a Senior Controls Engineer to anchor its engineering team in Springfield, NJ. This is a hands-on technical leadership position suited to an experienced professional who can take complex projects from concept to completion - shaping system architecture, leading the programming effort, and running commissioning, all while coaching less-experienced engineers and acting as a go-to technical advisor for customers. The successful candidate will bring deep practical expertise, sound decision-making when requirements are unclear, and the confidence to lead through influence within a lean, fast-paced team. Key Responsibilities • Technical Leadership: Act as lead engineer on complex, multi-disciplinary builds - owning key architecture decisions, setting the technical direction, and guiding engineers and technicians from initial concept through to commissioning., • Advanced Programming: Design and build PLC, HMI, motion control, robotics, and vision applications across leading platforms such as Allen-Bradley, Siemens, FANUC, UR, Cognex, Keyence, and Beckhoff., • Standards & Best Practice: Create and maintain engineering standards, reusable code libraries, and documentation templates that lift quality and consistency across the project portfolio., • System Integration: Oversee the integration of control systems into existing manufacturing lines, coordinating mechanical, electrical, and software workstreams to deliver efficient, reliable, and maintainable solutions., • Commissioning & Troubleshooting: Lead on-site start-up, system analysis, and advanced fault-finding, resolving the most difficult integration and performance challenges to keep equipment running at its best., • Mentorship & Support: Guide junior and mid-level engineers, run design and code reviews, and provide expert support and training to internal teams, technicians, and customers., • Project Execution: Manage project schedules, budgets, and vendor relationships, controlling scope and change orders to deliver on time and on budget., • Compliance & Safety: Ensure every project meets regulatory requirements and follows strict safety practices, including applicable UL 508A and industrial electrical safety standards. Qualifications • Education: A bachelor's degree in electrical engineering, mechanical engineering, computer science, or a related technical discipline is required., • Experience: At least 8 years in controls engineering, ideally within industrial, manufacturing, systems integration, or custom machine-building settings, with a proven record of running projects independently from concept to commissioning., • Technical Proficiency: Extensive, hands-on PLC programming and configuration skills. Rockwell platform experience is strongly preferred, with Siemens and/or Beckhoff proficiency also valued. A solid grounding in robotics, motion control, vision systems, sensor integration, and data acquisition is essential., • BOM & Documentation: Expert-level handling of structured BOMs and full electrical drawing packages across the complete project lifecycle., • Delivery Track Record: Consistent success delivering on time and on budget in a project-based or job-shop setting, including ownership of change-order processes., • Small-Shop Mindset: Comfortable in a lean, self-directed environment - happy to wear multiple hats and take full ownership of outcomes. Previous experience with an integrator or custom machine builder is a strong advantage., • Communication: Clear, direct communicator with internal teams, customers, and vendors, able to translate complex technical detail for different audiences. What's on Offer • Competitive salary with annual bonus potential and a clear path toward career growth and technical leadership., • A collaborative, low-bureaucracy culture where individual decisions carry real weight., • Exposure to a wide range of industries and machine types - no two projects are alike., • A team that takes pride in craftsmanship, accountability, and continuous improvement. Core Values • Champion the Customer: Build genuine partnerships, do the right thing, and win as a team., • Own It: Take accountability, work the problem, and drive results., • Deliver Excellence: Take pride in the work, bring expertise, and sweat the details., • Spark Innovation: Stay curious, embrace challenges, and keep growing., • Stronger Together: Respect, support, and look out for one another.

Job Title: Engineering Manager Location: Remote w/ travel Salary: $150,000-$180,000 + Bonus, Benefits and Travel Paid Skills: Industrial Automation, Controls Engineering, Control Systems About the Company / The Opportunity: Join a dynamic company in the control systems and automation industry that delivers advanced automation and control-system solutions for industrial, energy, life sciences, and mission-critical clients. This Engineering Manager role offers the opportunity to lead technical delivery across complex control-system projects, shape engineering standards and practices, and mentor high-performing teams while partnering with project management and business development to drive successful outcomes. The position blends technical leadership, project execution, and people development and may require travel to customer sites as project needs dictate. Responsibilities: • Lead technical delivery and engineering execution across multiple automation and control-system projects simultaneously, ensuring scope, schedule, and budget objectives are met., • Define, review, and approve system architecture and control-system designs, driving robust integration strategies and technical decisions., • Develop and implement company-wide engineering design philosophies, standards, and best practices to improve quality and consistency., • Collaborate with project managers, business development, and stakeholders to support technical proposals, presentations, and solution strategies., • Provide expert technical guidance to project teams on engineering, operational, and financial considerations, including risk mitigation., • Ensure adherence to quality management systems, safety standards, and continuous improvement in engineering workflows and documentation., • Lead, mentor, and develop engineering staff, managing workloads, performance feedback, staffing, and career progression. Must-Have Skills: • Bachelor’s degree in Electrical Engineering, Mechanical Engineering, Computer Science, or related technical discipline., • Typically 10+ years of experience in industrial automation, controls engineering, or systems integration environments., • Advanced knowledge of control systems design, automation platforms, PLC/DCS/SCADA integration, and industrial system integration principles., • Proven experience leading engineering teams and delivering complex automation projects., • Proficiency with project management tools such as Microsoft Project and strong ability to manage scope, schedule, and budget., • Excellent communication and stakeholder management skills across technical and executive audiences., • Commitment to quality, safety, and regulatory compliance in engineering delivery. Nice-to-Have Skills: • Professional Engineering (PE) license, PMP, or relevant industry certifications (e.g., ISA)., • Hands-on experience with major PLC and control platforms (e.g., Rockwell, Siemens, Honeywell, Emerson)., • Familiarity with contract management, commercial considerations, and proposal development., • Willingness and ability to travel to client sites as project needs require (up to ~50%).

We are seeking an experienced 1st Shift Automation & Controls Technician to support and maintain automated manufacturing and facility systems in a fast-paced industrial environment. The ideal candidate will have strong PLC, SCADA, electrical troubleshooting, and preventive maintenance experience, along with a commitment to safety and operational excellence. Key Responsibilities • Program, troubleshoot, and maintain PLC and SCADA systems., • Diagnose and repair electrical, automation, and industrial equipment issues., • Read and interpret electrical schematics, blueprints, and technical documentation., • Perform preventive maintennce, inspections, and equipment testing., • Support control system design, documentation, and continuous improvement initiatives., • Ensure compliance with electrical safety, lockout/tagout (LOTO), and arc flash procedures., • Collaborate with maintenance and operations teams to maximize equipment reliability. Qualifications • 3+ years of experience with industrial automation, PLC programming, and troubleshooting., • Experience with Allen-Bradley, Siemens, or similar PLC platforms., • Strong understanding of electrical systems, controls, and industrial equipment., • Knowledge of NEC, OSHA, NFPA 70E, and electrical safety standards., • Ability to work independently and as part of a team., • Comfortable performing physically demanding tasks, including climbing, lifting, and working in confined spaces., • Available for paid overtime Preferred Qualifications • Associate degree or technical certification in Electrical Technology, Engineering, or related, • Experience with SCADA systems and HMI development., • Electrical maintenance certifications., • Experience with pneumatic, hydraulic, or welding systems., • Bilingual English/Spanish is a plus. Apply today to join a growing organization focused on safety, reliability, and continuous improvement.

Job Description: This is a systems-level role requiring a strong hardware background and prior experience in the following areas: · Design of complex high-speed digital circuit card assemblies, including PCIe · Leading and mentoring junior engineers · Supporting testing and troubleshooting of systems, modules, and sub-assemblies, working closely with program engineering teams · Collaborating with Engineering, Operations, Quality, and other teams to drive root cause analysis and defect resolution · Driving improvements in product and test design to reduce cost, improve yield, and increase throughput · Creating and reviewing technical documentation such as test procedures, drawings, specifications, reports, and ECOs · Interfacing with government customers and suppliers as needed · Providing training and support to technicians and manufacturing teams · Supporting Root Cause and Corrective Action (RCCA) activities · Mentoring peers and junior engineers Required Education, Experience & Skills: · Experience in Model-Based Systems Engineering (MBSE) · Hands-on experience with MATLAB/Simulink · Experience with airborne actuators · Bachelor’s degree with 5+ years of relevant experience (or equivalent) · High-speed digital circuit card design experience · Experience in design, integration, and testing of complex electronic systems · Strong understanding of electrical engineering principles and problem-solving Preferred Skills: · Industrial temperature digital circuit card design · FPGA-based circuit card design · Experience with embedded processors, PCIe, Ethernet, 1553, SERDES, Fiber Optic, DDR3/DDR4 · Experience with CAD tools (Mentor/Siemens Xpedition) · Pre- and post-layout simulation using HyperLynx · Ability to guide layout and routing rules · Strong technical communication and documentation skills · Proven ability to meet challenging design requirements · Leadership qualities and ability to work in a team environment · Strong analytical and problem-solving skills · Ability to own tasks and drive them to completion · Experience presenting technical information to stakeholders

Company Description Red Balloon Security is the leader in runtime protection for embedded systems, having delivered more than 150 billion hours of device protection to customers. Red Balloon’s flagship products, Symbiote and AESOP, provide on-device security to protect critical infrastructure, medical devices, automotive ECUs, and industrial equipment from firmware-level attacks. Our researchers and engineers continue to explore, develop, and commercialize new capabilities, including RASPUTIN, the first “human-on-the-loop” hardware reversing robot. Our public research is a core part of how the market knows us. Red Balloon disclosed Thrangrycat, a secure-boot bypass affecting millions of Cisco devices, and the Siemens SIMATIC S7-1500 boot bypass vulnerabilities, an unpatchable flaw in one of the most widely deployed industrial PLC families. The team also publishes accessible technical content, such as our teardown of battery management systems on YouTube, and conference research including “Ice Ice Baby: Coppin’ RAM With DIY Cryo-Mechanical Robot” at REcon 2023. The BDR will use this body of work as credible, differentiated hooks in outbound messaging. Role Overview We're hiring a Business Development Representative (BDR) focused on top-of-funnel lead generation and marketing support. This role owns the earliest stage of the sales funnel: identifying, researching, and engaging prospective accounts across high priority verticals (including automotive, industrial controls, medical devices, and critical infrastructure), then converting that outreach into qualified meetings for the Account Executive team. The ideal candidate combines strong outbound fundamentals with fluency in modern AI-assisted prospecting tools, has a consistent track record of activity/quota attainment, and brings domain credibility in cybersecurity. Just as important, they contribute beyond a job spec by becoming a thought leader and building a deep understanding of our technology and competitive advantages. Our best commercial people are curious in the same way our researchers are. We're looking for someone who aspires to understand why runtime security matters to a product security engineer, not just how to get the meeting booked. If you have this innate curiosity and drive, we want to hear from you. Key Responsibilities • Build and continuously refine target account and contact lists using Apollo, LinkedIn Sales Navigator, and other prospecting databases, aligned to Red Balloon Security's ideal customer profile, • Execute multi-channel outbound campaigns (email, phone, LinkedIn, and AI-assisted sequencing) to generate qualified top-of-funnel leads and booked meetings, • Research and personalize outreach using account and contact intelligence, industry news, AI tools, and regulatory triggers relevant to embedded security buyers, • Qualify inbound leads from marketing campaigns, webinars, and events, and route sales-ready opportunities to Account Executives with clear context and actionable next steps, • Maintain accurate, up-to-date records of prospect activity, engagement, and pipeline stage in the CRM; ensure clean handoff data for Account Executives, • Prepare account research and first-meeting briefs, coordinate technical handoffs, and document the prospect’s interests, relevant stakeholders, and agreed next steps, • Continuously test and adopt emerging AI platforms for prospecting, list-building, personalization, and sequencing to improve outreach efficiency and response rates, • Partner closely with Marketing to align on campaign themes, target segments, and lead-scoring criteria; provide feedback loops on lead quality, • Track and report against activity and pipeline-generation KPIs (calls, emails, meetings booked, qualified opportunities created, conversion rates), • Stay current on competitive landscape and industry trends in embedded cybersecurity to identify opportunities, sharpen messaging, and objection handling Required Qualifications • 2 - 4 years of prior experience in a business development, sales development, or top-of-funnel lead generation role (B2B SaaS or B2B technology preferred), • Hands-on familiarity with emerging AI platforms used for prospecting, outbound sequencing, personalization, or lead generation (e.g., AI-assisted sales engagement tools, generative writing/personalization tools, intent-data platforms), • Practical experience with Apollo, CRM platforms (e.g., Salesforce, HubSpot), and other outbound marketing/sales engagement tools (e.g., Outreach, Salesloft, LinkedIn Sales Navigator, ZoomInfo), • Strong written and verbal communication skills, with the ability to craft compelling, concise outreach messaging, • Highly organized, self-motivated, willing to learn, and comfortable with high-volume, metrics-driven outbound activity, • Bachelor’s degree in Business Administration; concentration or degree in Sales or Marketing strongly preferred Preferred Qualifications • Prior experience selling into or prospecting within the cybersecurity space, ideally with exposure to embedded systems, industrial control systems (ICS/OT), automotive, or IoT security, • Familiarity with cybersecurity buyer personas (CISOs, product security engineers, embedded engineering leaders) and basic fluency in relevant regulatory frameworks (UNECE, ISO 21434, EU CRA, IEC 62443), • Experience working closely with a Marketing team on campaign-driven pipeline generation, • Track record of consistently meeting or exceeding pipeline-generation quotas Success Metrics (First 6 - 12 Months) • Consistent achievement of monthly/quarterly outbound activity targets (calls, emails, social touches), • Achievement of qualified meetings booked and sales-accepted opportunities per month, • Improvement in outreach response and conversion rates through iterative use of AI tooling and messaging refinement, • Positive feedback from Account Executives on lead quality, handoff clarity, and teamwork Tools & Tech Stack Apollo, Salesforce or HubSpot (CRM), Outreach/Salesloft (or similar sales engagement platform), LinkedIn Sales Navigator, ZoomInfo, and emerging AI-assisted prospecting/personalization tools. Compensation & Benefits Annual base salary range of $80,000 to $110,000. Commission (tied to pipeline-generation and meetings-booked targets) of up to 30% of base salary at target, with accelerators for overperformance. Full, competitive benefits package (health/dental/vision, 401(k), PTO).

🚨 We're Hiring: Manufacturing Engineer 📍 Dayton, OH (Onsite) Are you passionate about CNC machining, process optimization, and continuous improvement? We're looking for a Manufacturing Engineer to join a growing medical device manufacturer where you'll play a key role in advancing manufacturing technology and driving operational excellence What You'll Do: 🔹 Develop and optimize CNC machining processes for multi-axis milling, turning, Swiss machining, and grinding 🔹 Create and maintain CAD/CAM programs using Mastercam, SolidWorks, or Siemens NX 🔹 Support new product introductions (NPI) and Design for Manufacturability (DFM) initiatives 🔹 Improve productivity through lean manufacturing, automation, tooling, and fixture design 🔹 Troubleshoot complex machining challenges and mentor technicians and programmers 🔹 Collaborate with Operations, Quality, Engineering, Sales, and customers to deliver world-class manufacturing solutions What We're Looking For: ✔ Bachelor's or Associate's degree in Engineering (or equivalent CNC experience) ✔ 3+ years of CNC Manufacturing Engineering experience (or equivalent experience) ✔ Strong CAD/CAM programming experience (Mastercam, Siemens NX, or SolidWorks preferred) ✔ Experience with Fanuc controls, GD&T, blueprint reading, tooling, and fixture design ✔ Hands-on machining and process development experience ✔ Lean Manufacturing and Continuous Improvement mindset Why Join Us? ✅ Opportunity to work with advanced CNC technologies and automation ✅ Collaborative engineering environment ✅ Make an impact in the growing medical device industry If you're ready to take your manufacturing engineering career to the next level, we'd love to connect! 📩 Apply today Lincotek Medical provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or loc al law.

Strategic Account Executive – Enterprise Industrial & Life Sciences Software Location: Remote – United States Employment Type: Full-time Compensation: 140,000–160,000 Base | 280,000–320,000 OTE Travel: 50%+ U.S. and International About the Opportunity: We are seeking a Strategic Account Executive to lead enterprise sales for a high-value software portfolio serving organizations across chemicals, materials science, manufacturing, life sciences, and pharmaceuticals. This is a senior enterprise sales role for an accomplished seller who can engage C-suite and senior technical stakeholders, navigate complex sales cycles, and develop strategic relationships within large organizations. The ideal candidate brings a proven track record selling enterprise operational software and an established network within relevant industrial or life sciences markets. Key Responsibilities: Own the full enterprise sales cycle from prospecting and account strategy through negotiation and close. Develop and execute strategic account plans across large enterprise customers. Build relationships with C-level executives, business leaders, technical decision-makers, and procurement teams. Drive complex, multi-stakeholder sales involving long sales cycles and significant contract values. Identify opportunities across chemicals, materials science, manufacturing, life sciences, and pharmaceutical organizations. Leverage an established senior-level network to create and accelerate enterprise opportunities. Partner with solution consultants, product teams, and executive leadership to develop compelling customer solutions. Manage forecasting, pipeline development, and strategic territory planning. Represent the company at customer meetings, industry events, and executive engagements in the U.S. and internationally. Required Qualifications: 8–12+ years of experience in Strategic or Enterprise Account Executive roles. Demonstrated success selling enterprise software or SaaS into large organizations. Experience selling ERP, PLM, MES, manufacturing operations, scientific, R&D, or materials science software. Strong understanding of complex enterprise sales processes and multi-year sales cycles. Established senior-level relationships within chemicals, materials science, manufacturing, life sciences, or pharmaceutical organizations. Domain experience in chemistry, process manufacturing, life sciences, materials science, or a related technical field. Proven ability to engage and influence senior executives and technical stakeholders. Willingness and ability to travel 50%+, including domestic and international travel. Preferred Background: Experience with organizations or platforms such as: Benchling, Uncountable, Citrine, PTC, Dassault Systèmes/BIOVIA, Siemens, AspenTech, or major cloud/hyperscale technology companies serving industrial or life sciences markets. An engineering, scientific, technical, or materials-related background is highly valued. Important This is a strategic enterprise sales position. Candidates whose experience is primarily limited to SMB or mid-market sales without significant enterprise selling experience will not be considered. How to Apply: Please submit your resume along with a brief note highlighting your software engineering expertise, primary programming languages and technologies, areas of technical specialization, and relevant experience designing, developing, or scaling production software systems.

VP of Industrial Software Hybrid / Remote · HQ Allentown, PA · Seed Stage About 4MP At 4MP, we are building a new technological foundation for precision manufacturing. Our systems enable CNC machines to self-measure, self-correct, and continuously improve their performance - transforming conventional machine tools into autonomous precision systems. Backed by a leading institutional investor and extensively vetted by recognized experts across industry and government laboratories, 4MP is at the beginning of a category-defining journey. We are transitioning from early development into building a visionary company that will redefine how precision manufacturing is done globally. About the Role We are seeking a hands-on VP of Industrial Software who has built and shipped industrial software that runs in production, on real machines, in real plants. You will build and lead the software organization and the product it delivers, from architecture through release, working directly with the founding leadership team and R&D team across machine physics, metrology, AI, and customer operations to turn our technology into a reliable, deployable, commercial product. Joining at this seed stage means you will have a foundational voice in shaping the company, the product architecture, and how we deliver software to manufacturing customers. You will not simply manage a backlog; you will define what we ship, how we ship it, and the standard of quality we hold ourselves to. What You Will Do • Own the Software Product: Define and drive the product strategy, roadmap, and release plan, and be accountable for what reaches customers. You will lead the software and product function while staying technically hands-on in architecture, code, and design reviews., • Ship Production-Grade Software: Turn research and prototypes created by the R&D team into a hardened, supportable product with real release discipline: versioning, testing, documentation, deployment, upgrades, and field support., • Define the SaaS and Deployment Model: Architect how the platform is delivered and licensed across cloud, on-premise, edge, and disconnected plant networks, with the telemetry and update paths each demands., • Own Industrial Requirements and Security: Drive requirements for cybersecurity, data protection, access control, uptime, traceability, and validation, aligned to industrial and customer IT standards., • Run the Development Process: Establish the operating cadence of the engineering organization: agile planning, sprint execution, definition of done, release trains, and honest schedule management., • Lead Customer Deployments and Pilots: Work directly with customers on requirements, pilot installations, and production rollout, and convert what you learn on the floor into product decisions., • Drive Strategic Cross-Functional Leadership: In close interaction with other functional leaders, you will contribute to defining the company strategy, technology and business roadmaps, and comprehensive project plans. What We Require • Proven Industrial Software Delivery: A solid track record of building and shipping commercial software used in manufacturing, robotics, industrial automation, or comparable industrial environments. You have owned products that customers run every day., • 10+ Years of Experience: Deep background in software engineering and product leadership, including time spent building software yourself before leading others who build it., • Real-World Sensing and Machine Data: Direct experience with products built on sensor, metrology, control, or telemetry data from physical systems, and a clear understanding of how messy that data is in practice., • Industrial Requirements and Security: Working knowledge of industrial cybersecurity, on-premise and segmented plant networks, safety and quality expectations, data governance, and the validation and documentation that industrial customers require., • SaaS and Platform Product Leadership: Experience defining and running a software-as-a-service or platform product, including architecture tradeoffs, release management, support models, and commercial packaging., • Software Team Leadership: Proven ability to lead engineers and product managers, set priorities under real constraints, and hold a team to a shipping schedule without losing technical credibility., • Educational Foundation: Bachelor’s degree in Computer Science, Engineering, Physics, Mathematics, or a related field. What Will Set You Apart • Industrial Technology Pedigree: Experience at a major industrial software or automation organization (for example Siemens, Hexagon, Microsoft on the industrial and manufacturing side, Rockwell, PTC, Autodesk, or similar), ideally combined with startup experience., • Agile and Scrum Master Credentials: Formal Scrum Master experience or certification, and a demonstrated ability to install a development process that actually holds., • Project Management Discipline: Structured project and program management experience, including PMP or equivalent, applied to multi-team hardware and software programs., • Manufacturing Domain Fluency: Familiarity with CNC machining, CAM, metrology, quality systems, or robotics, and comfort speaking the language of manufacturing engineers on the shop floor., • Visionary Drive: You are not just looking for a senior title; you are looking for the opportunity to achieve a career-defining milestone by building a product that fundamentally reshapes an entire industry.

Job Description Electrical Test Technician Kearny, NJ $25-$30/hr + overtime First Shift 7am-3:30pm Monday-Friday Direct Hire Role-Union Facility Primary Job Duties -Performs electrical product testing in a manufacturing setting -Performs product and system repair and preventive maintenance as required -Performs verification checks on electronic instruments -Writes procedures for test and inspection -Investigates and troubleshoots parts -Follows established safety procedures -Responsible for quality as related to job duties and has the authority to address issues of quality at any level -Experience with electrical testing equipment such as Ratiometers, Hi-Pots, Volt meters. -Knowledge of Siemens power configurations a bonus. Qualifications -High school diploma or equivalent qualification AS degree in electronics preferred or minimum 2 years equivalent experience

Job DescriptionMRI Technologist - Maplewood, NJ (#3442) • Location: Maplewood, NJ., • Employment Type: Full-time., • Hourly Rate: $40/hr - $45/hr. About Greenlife Healthcare Staffing:Greenlife Healthcare Staffing is a leading nationwide recruitment agency dedicated to connecting healthcare professionals with top-tier opportunities. We partner with hospitals, clinics, nursing homes, multi-specialty groups, and private practices to match talented individuals with roles that align with their skills and career goals. Position Overview:Greenlife Healthcare Staffing is seeking a full-time MRI Technologist to join an Imaging Office at a Radiology Group in Maplewood, NJ. This role requires an experienced professional with significant MR work experience, particularly with high-field magnets. The position offers a highly competitive hourly rate and the opportunity to train in and perform remote MRI scanning. Why Join Us? • Competitive Compensation: $40/hr - $45/hr., • Comprehensive Benefits:, • Medical, dental, and life insurance., • 401k / pension., • Profit-sharing plans., • Generous paid time off policy and more., • Work Schedule: Full-time position., • Professional Growth: Gain valuable experience in a collaborative, innovative, and supportive environment., • Impactful Work: Contribute to a mission-driven organization dedicated to improving patient outcomes. Qualifications: • Education: Graduate of an accredited Radiologic Technology or MRI program., • Licensure: ARRT(MR) certification required., • Experience: 1 year of MR work experience required; high-field magnet experience is a must; GE high-field magnet experience preferred; Phillips and Siemens experience a plus; CT experience preferred., • Technical Skills:, • May be required to train in and perform remote MRI scanning., • Will be required to perform duties in or near areas containing specialized imaging equipment and must be able to adhere to all department and facility safety protocols. Key Responsibilities: • Perform MRI exams with accuracy and care using high-field magnets across multiple office locations., • Operate and maintain MRI imaging equipment according to established protocols on various equipment brands (GE, Phillips, Siemens), • Ensure patient safety and comfort throughout all procedures, including screening for MRI safety contraindications., • Train in and perform remote MRI scanning as required., • Adhere to all department and facility safety protocols, especially when working in or near areas containing specialized imaging equipment., • Maintain required certifications and stay current with industry standards., • Collaborate with radiologists and other healthcare team members as needed., • Utilize CT experience as a plus when applicable., • May be required to perform duties in or near areas containing specialized imaging equipment Greenlife Healthcare Staffing- Empowering Healthcare Professionals, Enriching Lives.

Job Description Job Details: Radiology / Cardiology Pay: $57 per hour Assignment Length: 13 Weeks Schedule: Day 5:30am-1:30pm or Night 11pm-7am Start Date: 6/1/2026 Experience: 1 year ATC Healthcare seeking an experienced X-Ray Technologist to perform diagnostic imaging procedures in a variety of clinical settings. This role includes working with diverse patient populations and supporting both routine and emergency imaging needs. Responsibilities include: • Performing high-quality diagnostic X-ray exams in accordance with physician orders, • Operating imaging equipment safely and effectively, • Assisting with bedside/portable imaging throughout the facility, • Supporting imaging needs in:, • Emergency Department, • ICU / PICU / NICU, • Operating Room (including C-Arm procedures), • Preparing patients for procedures and ensuring comfort and safety, • Accurately documenting and uploading images using PACS, • Following all radiation safety and infection control protocols Skills & Experience Required: • Experience with a wide range of imaging procedures, including:, • Chest (AP, routine, decubitus views), • Abdomen (KUB, supine, upright, decubitus), • Spine, pelvis, and extremities, • Skull, facial bones, sinuses, and TMJ, • Strong experience with:, • Portable/bedside imaging, • Trauma imaging and emergency cases, • Operating Room procedures (C-Arm preferred), • Knowledge of contrast studies (including barium procedures), • Familiarity with imaging equipment such as GE Healthcare and Siemens Healthineers, • Strong patient positioning and image quality skills, • Ability to work efficiently in fast-paced environments, • Radiology Tech skills Requirements: • ARRT Certification (American Registry of Radiologic Technologists), • Active New Jersey License, • BLS Certification, • Minimum 1 year of clinical X-ray experience preferred

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Key Responsibility Areas: • Lead and mentor a multi-disciplinary organization spanning control systems, instrumentation, diagnostics acquisition, embedded software, and real time integration, including hiring, performance management, career development, and team structure., • Establish engineering operating rhythm: planning, prioritization, technical reviews, staffing plans, and decision-making processes., • Set technical direction and ensure consistent engineering quality across requirements, architecture, implementation, verification, and documentation., • Own the Eos CID architecture, including functional, physical, communications, timing, and data flow boundaries across fast DAQ, supervisory control, PLC automation, safety interlocks, and diagnostics acquisition., • Lead technology selection for real time control, SCADA, networking, timing, and data management, and ensure consistency across integration protocols and data interfaces., • Own the technical interface to external vendors and collaborators providing controls hardware, diagnostics hardware, and instrumentation deliverables, including technical specifications, design reviews, and acceptance participation., • Oversee development and integration of the Eos control system across major subsystems, ensuring deterministic behavior, fault handling, and operational sequencing., • Own Safety and Interlock System philosophy, including safety class logic where required, participation in hazard analyses, and alignment to functional safety practices and standards., • Own instrumentation architecture across the facility: sensor selection, signal types, isolation strategy, signal conditioning, grounding, shielding, and segregation practices for noisy, high power environments., • Oversee diagnostic acquisition architecture end to end, from front end sensors and conditioning through digitizers, FPGA processing, data streaming, and archiving in support of plasma operations and feedback control., • Partner with systems engineering to translate device requirements into CID requirements, interface definitions, and verification plans., • Run evidence based technical gates and design reviews, with clear entry and exit criteria and configuration control., • Own delivery artifacts such as requirements, interface control documents, design packages, test plans, and acceptance evidence to support procurement, installation, and commissioning., • Maintain a strong safety culture including machine protection thinking, hazard analysis inputs, and design choices that support safe installation and operations., • Provide hands on leadership in lab and field environments, coordinating with technicians and test teams for build, wiring, installation support, and debug.Ideal Experience & Skillsets:, • Bachelor’s degree or higher in Electrical Engineering, Controls, Computer Science, Physics, or equivalent., • 10 or more years of relevant experience spanning two or more of the following: integrated control systems, industrial automation, fast data acquisition, instrumentation systems engineering, diagnostics acquisition, real time embedded software., • 5 or more years of engineering management experience leading multi team organizations, including hiring and performance leadership., • Demonstrated experience owning complex system development from architecture through prototype validation and integration., • Strong foundation in safety and high reliability engineering practices, including interlocks, alarms, fail safe design, and disciplined documentation., • Strong cross functional communication skills and experience driving technical decisions across physics, mechanical, electrical, safety, and program teams., • Exceptional work ethic and communication skills., • Experience delivering CID systems for fusion devices, accelerators, advanced nuclear, or other large scientific facilities with tight timing and data fidelity requirements., • Experience with EPICS or TANGO, and industrial integration protocols such as OPC UA, DDS, Modbus, and deterministic timing networks., • Experience with functional safety workflows and standards driven PLC systems engineering., • Experience with FPGA based acquisition and low latency streaming pipelines for real time feedback and machine protection., • Familiarity integrating AI and digital twin capabilities into supervisory control and operations workflows., • Control frameworks and integration: LabView, EPICS, TANGO, OPC UA, DDS, Modbus, TCP IP., • PLC platforms: Siemens TIA Portal, Beckhoff TwinCAT, Allen Bradley, Codesys, IEC 61131 3 practices., • Timing and synchronization: White Rabbit, IEEE 1588 PTP., • Data acquisition and diagnostics: PXIe digitizers, FPGA platforms, event and timestamping frameworks, data streaming infrastructure., • Embedded and middleware software: real time embedded Linux and real time operating systems, C and C++, distributed orchestration tooling., • Instrumentation design and documentation: AutoCAD Electrical, EPLAN, tag databases, input and output lists, cable schedules and loop diagrams.Requirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call., • Ability to work in a facility that contains industrial hazards including heat, cold, noise, fumes, strong magnets, high voltage, high current, pressure systems, and cryogenics.#LI-CB1Company Benefits:, • Salary range $120,000-$240,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTO We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Senior Lead Controls & Robotics Engineer We are seeking a hands-on Lead Controls & Robotics Engineer to lead the design and implementation of advanced automation systems integrating industrial controls, robotics, machine vision, motion control, and custom automation equipment. This is an opportunity for a technically strong engineer who enjoys leading complex projects, mentoring other engineers, and remaining hands-on from system concept and design through commissioning and production startup. What You'll Do • Serve as the technical lead on complex automation and system integration projects., • Lead and mentor Controls, Robotics, and Vision Engineers while providing technical direction throughout project execution., • Design and program PLC, HMI, motion control, robotics, and machine vision systems., • Work with controls platforms including Allen-Bradley/Rockwell, Siemens, and Beckhoff., • Develop and integrate robotic applications using FANUC, ABB, KUKA, UR, and Denso., • Design and implement machine vision applications using Cognex, Keyence, and Matrox Imaging., • Develop vision-guided robotic applications for inspection, measurement, verification, barcode/OCR, and 2D/3D vision applications., • Integrate controls, robotics, vision, sensors, motion systems, and industrial networks into complete automation solutions., • Lead FAT, SAT, commissioning, debugging, customer acceptance testing, and production startup., • Provide advanced troubleshooting and optimization of automation systems in manufacturing environments., • Establish engineering standards, reusable code libraries, and documentation practices., • Review and manage structured BOMs, electrical drawings, and project documentation., • Manage technical scope, project priorities, schedules, vendors, and engineering changes., • Ensure systems meet applicable safety and electrical standards, including UL 508A requirements., • Work directly with customers, vendors, manufacturing teams, and internal engineering groups. Qualifications • Bachelor's degree in Electrical Engineering, Mechanical Engineering, Computer Science, Automation Engineering, or related technical discipline., • 5+ years of experience in industrial automation, controls, robotics, machine vision, or systems integration., • Strong hands-on experience with Rockwell/Allen-Bradley PLC programming required., • Experience with Siemens and/or Beckhoff is highly desirable., • Strong background in robotics, machine vision, motion control, sensors, and industrial automation., • Demonstrated ability to lead projects independently from concept through commissioning., • Experience mentoring engineers or providing technical leadership., • Experience working for an automation integrator, OEM, custom machine builder, or project-based manufacturing environment preferred., • Strong troubleshooting, communication, leadership, and customer-facing skills., • Comfortable working in a lean environment and taking ownership of multiple projects., • Ability to travel approximately 25%. Compensation & Benefits • $100,000 – $150,000 +, • Bonus Potential, • Comprehensive Benefits Package, • Flexible Work Environment, • Opportunity to lead technically challenging automation, robotics, and machine vision projects Work Authorization • U.S. Citizen or Permanent Resident (Green Card Holder) To Apply ???? ???? Call/Text Steve Moore – ???? Connect with me on LinkedIn #engineering #controls #robotics #industrialautomation #plc #systemsintegration #hybrid, #midsenior #libertyjobs \nCompany Description Libertyjobs.com has become an essential destination site for experienced job seekers. Our recruiters are continually posting active job openings to the website. Feel free to search our database of open positions and apply for your next career move! Hundreds of new jobs are listed on the site every month in a wide range of industries and locations. Last year we had over 900,000 unique job seekers visit our website, which means over 75,000 skilled job seekers search our openings every month. Established in 2003, Liberty Personnel quickly grew into one of the largest technical recruiting agencies on the East Coast. Today, Liberty Personnel has a national presence and a diverse client base. Listed below are a number of the industries and openings we work on: Information Technology, Software Programmers, Engineering, Manufacturing, Legal, Plant Maintenance, Construction, Oil and Gas, Medical Communications, Accounting, Finance, Electronics, Scientific, Medical Device, Sales, Pharmaceutical, Admin, Automation, Controls, Civil, HVAC, Wastewater, Structural, Electrical, Chemists, Validations, Logistics, Food Production, Renewable Energy and Machinists. Libertyjobs.com has become an essential destination site for experienced job seekers. Our recruiters are continually posting active job openings to the website. Feel free to search our database of open positions and apply for your next career move!\n\nHundreds of new jobs are listed on the site every month in a wide range of industries and locations. Last year we had over 900,000 unique job seekers visit our website, which means over 75,000 skilled job seekers search our openings every month.\n\nEstablished in 2003, Liberty Personnel quickly grew into one of the largest technical recruiting agencies on the East Coast. Today, Liberty Personnel has a national presence and a diverse client base. Listed below are a number of the industries and openings we work on:\n\nInformation Technology, Software Programmers, Engineering, Manufacturing, Legal, Plant Maintenance, Construction, Oil and Gas, Medical Communications, Accounting, Finance, Electronics, Scientific, Medical Device, Sales, Pharmaceutical, Admin, Automation, Controls, Civil, HVAC, Wastewater, Structural, Electrical, Chemists, Validations, Logistics, Food Production, Renewable Energy and Machinists.

Job Description As a 100% Employee-Owned company, Robert E. Mason & Associates, Inc. believes our Associates are the foundation of both our customers' and our success. Our strong company culture, and belief in continued investment in our Associates, has helped us realize long Associate tenures, as well as long lasting relationships with our customers. Under the Robert E. Mason & Associates, Inc. umbrella there are two divisions: R.E. Mason and Apperture Solutions. Apperture Solutions is a technology independent, professional consulting, and implementation services firm. Apperture Solutions offers Data Enablement, Production Optimization, Operations Management, and Other Value-Added Services. Apperture Solutions partners with other providers to offer our customers the technologies and solutions that fit their needs. What Apperture Solutions Offers Associates: Apperture Solutions is a 100% employee-owned company that offers a comprehensive, industry leading benefits package to all eligible Associates: • Participation in the Employee Stock Ownership Program (ESOP), • Retirement plan, including a Safe Harbor contribution, • Medical / Dental / Vision Insurance, • Employer paid Life Insurance and Long-Term Disability Insurance, • Generous paid leave options that include vacation time, sick leave, personal leave time, R.E. Mason Way Half Day, paid Jury Duty, and paid Bereavement Leave, • Paid Parental Leave, • Paid company holidays, • Career Development Program, • Retirement and Financial Wellness program, • Employee Assistance Program (EAP), • Alternative/Hybrid Work Schedules General Description We are looking for a talented and dedicated Senior Automation Engineer to join our Facility Automation Services Team. The ideal candidate will have a strong background in building management systems and other facility automation systems (including access control systems, video surveillance systems, and other complimentary solutions), excellent problem-solving skills, project management experience, and the ability to work effectively as a lead in a team environment. This role involves planning and overseeing the design, configuration, and commissioning of facility automation systems to ensure optimal performance and reliability. The role also provides site engineering support to customers. Typically, this includes maintaining and updating existing configuration, implementing small scale expansion projects and assisting with process optimization projects. Specific Responsibilities • Design, configure, troubleshoot, and maintain various building management and facility automation systems., • Plan architectures for interfaces between various building management systems and with other systems, including SCADA solutions, local Historians and 3rdparty systems., • Develop test plans and strategies for commissioning of facility automation systems either at vendor facilities or at the customer's site during installation, and lead an automation commissioning team., • Advise customers on technology selection, project execution strategy, and technical problems., • Develop project budget and schedules, integrating with engineering partner and client project management teams., • Provide technical support and guidance to other team members and clients as needed., • Lead a team of facility automation engineers, overseeing and reviewing their work as the client's primary point of contact., • Plan and develop system documentation deliverables, including functional requirements specifications and detailed design specifications for a variety of applications., • Support Factory Acceptance Tests (FATs) and Site Acceptance Tests (SATs)., • Support start-up and commissioning activities at customer sites. Qualifications Required Competencies • US Citizenship required, • Experience with Siemens Apogee / Desigo platforms, Schneider EcoStruxure (EBO), Johnson Controls MetaSys, Honeywell Niagara BMS framework, or other relevant BMS platforms., • Advanced knowledge of HVAC controls, utility controls, and environmental monitoring., • A self-starter acting as the working lead of a team in a fast-paced environment., • Ability to communicate effectively with team members and clients, both orally and in writing., • Excellent problem-solving and analytical skills., • Strong attention to detail and commitment to quality., • Willingness to travel as needed to support project requirements in – approximately 25%. Required Education and Experience • Relevant Associates Degree or B.S. in CHE, EE, ME, Comp. Eng, Systems Eng., Comp. Sci., or other related disciplines, • 8-15 years of relevant experience, • MS Office Experience Preferred Experience/Competencies • Experience with building access control systems, video surveillance systems, energy management systems, and lighting control systems, • Windows and network troubleshooting skills., • Knowledge of applicable industry standards such as ISA and IEC., • Experience working in regulated industries, with pharmaceuticals industry experience strongly preferred., • Experience with computer systems validation. Physical Requirements • Standing, • Walking, • Sitting, • Kneeling, • Reaching Overhead, • Climbing, • Pushing and Pulling, • Lifting - 20 pounds, • Using a Computer, • Using a Telephone, • Driving Compensation The base salary range for this role is $80,000 to $200,000 annually. Individual compensation may vary based on experience, qualifications, and other job-related factors. Apperture Solutions is a federal contractor and, as such, is required to solicit the disability status and protected veteran status of candidates. Thus, you are required to answer self-identification questions as part of your application process. These questions are part of Apperture Solution's Affirmative Action Plan and the completion of these questions will not have any effect on any consideration of your application materials. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and need to request an accommodation in order to apply for a position with Apperture Solutions, please call our office at (704) 375-4465. This is a drug-free workplace. Employment is contingent upon the successful completion of any required pre-employment and, if applicable, ongoing drug testing, including testing mandated by customer site access requirements.

Job Description MRI Technologist - Maplewood, NJ (#3442) Location: Maplewood, NJ Employment Type: Full-time Hourly Rate: $40/hr - $45/hr About Greenlife Healthcare Staffing: Greenlife Healthcare Staffing is a leading nationwide recruitment agency dedicated to connecting healthcare professionals with top-tier opportunities. We partner with hospitals, clinics, nursing homes, multi-specialty groups, and private practices to match talented individuals with roles that align with their skills and career goals. Position Overview: Greenlife Healthcare Staffing is seeking a full-time MRI Technologist to join an Imaging Office at a Radiology Group in Maplewood, NJ. This role requires an experienced professional with significant MR work experience, particularly with high-field magnets. The position offers a highly competitive hourly rate and the opportunity to train in and perform remote MRI scanning. Why Join Us? • Competitive Compensation: $40/hr - $45/hr, • Comprehensive Benefits:, • Medical, dental, and life insurance, • 401k / pension, • Profit-sharing plans, • Generous paid time off policy and more, • Work Schedule: Full-time position., • Professional Growth: Gain valuable experience in a collaborative, innovative, and supportive environment., • Impactful Work: Contribute to a mission-driven organization dedicated to improving patient outcomes. Qualifications: • Education: Graduate of an accredited Radiologic Technology or MRI program, • Licensure: ARRT(MR) certification required, • Experience: 1 year of MR work experience required; high-field magnet experience is a must; GE high-field magnet experience preferred; Phillips and Siemens experience a plus; CT experience preferred, • Technical Skills:, • May be required to train in and perform remote MRI scanning., • Will be required to perform duties in or near areas containing specialized imaging equipment and must be able to adhere to all department and facility safety protocols. Key Responsibilities: • Perform MRI exams with accuracy and care using high-field magnets across multiple office locations, • Operate and maintain MRI imaging equipment according to established protocols on various equipment brands (GE, Phillips, Siemens), • Ensure patient safety and comfort throughout all procedures, including screening for MRI safety contraindications, • Train in and perform remote MRI scanning as required, • Adhere to all department and facility safety protocols, especially when working in or near areas containing specialized imaging equipment, • Maintain required certifications and stay current with industry standards, • Collaborate with radiologists and other healthcare team members as needed, • Utilize CT experience as a plus when applicable, • May be required to perform duties in or near areas containing specialized imaging equipment How to Apply: If you are ready to take the next step in your career and make a difference in the healthcare industry, we want to hear from you! Submit your Resume/CV to hr@glhstaffing.com or call our office at (800) 608-4025 to learn more about this opportunity and others we offer. Greenlife Healthcare Staffing- Empowering Healthcare Professionals, Enriching Lives

Job Description1. Equipment Operation & Maintenance • Perform routine inspection, preventive maintenance, calibration, and troubleshooting of automated sortation systems, conveyor systems, barcode scanners, DWS systems, and other material handling equipment., • Monitor equipment performance and operating parameters to ensure system availability and operational efficiency (target uptime of 98% or higher)., • Maintain accurate maintenance records and equipment documentation.2. Troubleshooting & Technical Support, • Respond quickly to equipment failures, system alarms, downtime, and operational issues., • Diagnose electrical, mechanical, PLC, and control system failures and implement corrective actions to minimize production interruptions., • Establish rapid response procedures to reduce equipment downtime and improve maintenance efficiency.3. Preventive Maintenance & Reliability Improvement, • Develop and execute preventive maintenance programs for automation equipment., • Manage spare parts inventory and track component life cycles., • Monitor key maintenance KPIs, including MTBF (Mean Time Between Failures), and continuously improve equipment reliability while reducing maintenance costs.4. Equipment Installation & Continuous Improvement, • Participate in the installation, commissioning, testing, and acceptance of new automation equipment., • Work closely with equipment vendors and engineering teams on system upgrades and process improvements., • Analyze equipment performance data and recommend energy-saving initiatives and operational optimization projects.5. Documentation & Training, • Develop standard operating procedures (SOPs), maintenance documentation, and emergency response procedures., • Provide technical training and guidance to operations and maintenance personnel on the proper operation and maintenance of automation equipment., • Promote standardized maintenance practices and continuous improvement initiatives. Requirements • Associate's degree or above in Electrical Engineering, Mechanical Engineering, Automation Engineering, Industrial Engineering, Logistics Engineering, or a related technical field., • Experience maintaining automated material handling systems, conveyor systems, or warehouse automation equipment., • Familiarity with cross-belt sorters, DWS systems, AGVs, barcode scanners, and other logistics automation equipment., • Strong knowledge of electrical systems, motor controls, sensors, drives, and industrial automation., • Experience with PLC programming and troubleshooting (Siemens, Mitsubishi, Allen-Bradley, or similar platforms)., • Ability to read and interpret electrical schematics and engineering drawings., • Proficiency with AutoCAD, EPLAN, or similar engineering software., • Basic understanding of industrial networking and TCP/IP communication is preferred., • Must be bilingual in Mandarin and EnglishExperience & Certifications, • Minimum 3 years of experience maintaining automated logistics equipment, warehouse automation systems, or industrial automation equipment preferred., • California Electrician Certification or equivalent electrical certification is preferred. Candidates without certification should be willing to obtain the required certification within a reasonable period after hire., • OSHA 10/30 certification is a plus. Benefits • Base Salary: 60k-100k + bonus （Negotiable base on experience）, • 7 PTO days, • 5 Paid Sick Leave Days, • 6 Paid Holidays, • 401K, • Medical insurance, Dental and Vision Insurance, STD/LTD

Job Description Automation PLC/SCADA Engineer Contract – NJ Shift: 2nd or 3rd shift (evenings or nights) Overview Seeking a hands-on Automation/Controls Engineer to support pharmaceutical manufacturing operations. The ideal candidate has a strong PLC/SCADA background within a GMP pharmaceutical environment and is comfortable troubleshooting automated manufacturing equipment on the production floor. This is a mid-level opportunity for someone with a solid engineering foundation who is still technically hands-on and interested in continuing to learn. Background • 4–10 years of pharmaceutical/biopharmaceutical automation experience, • Hands-on experience supporting manufacturing automation and controls systems, • Strong experience with PLC and SCADA systems, particularly Allen-Bradley and/or Siemens, • Experience troubleshooting across PLC, HMI/SCADA, instrumentation, electrical, software, and industrial networking, • Experience in GMP/cGMP manufacturing environments, • Background supporting equipment integration, commissioning, FAT/SAT, qualification, or capital projects, • Strong root-cause analysis and problem-solving capabilities, • Experience with sterile manufacturing or filling lines is highly preferred Requirements • 4–10 years of relevant pharmaceutical automation/controls experience, • Strong PLC programming/troubleshooting experience, • Strong SCADA/HMI experience (Ignition, iFix, WinCC, etc.), • Ability to troubleshoot and resolve automation issues on manufacturing equipment, • Working knowledge of GMP, automation validation, change control, investigations, and data integrity, • Experience with industrial networking and automation communication protocols is preferred, • Must be technically hands-on

The candidate selected for this position will: \n\n • The candidate selected for this position will promote a culture of healing, while accurately interpreting and performing all MRI imaging protocols\n, • The candidate will practice in accordance with state, federal and professional standards\n, • Must demonstrate knowledge of MR imaging equipment; including set-up, utilization, basic troubleshooting and proper care for all equipment\n, • Will abide by strict MR Safety standards and evaluate MR scans for technical quality\n, • EPIC and PACS will be used to manage patient workflow and transmit images for interpretation\n, • Must be competent with IV skills and preparing/administering contrast media\n\n Minimum Education: \n\n • Completion of a 24-month AMA approved School of Radiologic Technology required\n\n License/Certifications: \n\n • ARRT Certified\n, • BLS/CPR certification\n, • IV Certification preferred\n\n Relevant Experience: \n\n • 2 years MRI Experience, Siemens preferred\n About US\n\n \n At Atlantic Health, our promise to our communities is; Anyone who enters one of our facilities will receive the highest quality care delivered at the right time, at the right place, and at the right cost. This commitment is also echoed in the respect, development and opportunities we give to our more than 22,000 team members. Headquarters in Morristown, New Jersey, we are one of the leading non-profit health care systems in the nation. Our facilities and sites of care include: \n \n • Atlantic Health Morristown Medical Center, Morristown, NJ\n, • Atlantic Health Overlook Medical Center, Summit, NJ\n, • Atlantic Health Newton Medical Center, Newton, NJ\n, • Atlantic Health Chilton Medical Center, Pompton Plains, NJ\n, • Atlantic Health Hackettstown Medical Center, Hackettstown, NJ\n, • Atlantic Health Goryeb Children's Hospital, Morristown, NJ\n, • Atlantic Health CentraState Healthcare System, Freehold, NJ\n, • Atlantic Medical Group\n, • Atlantic Visiting Nurse\n, • Atlantic Mobile Health\n, • Atlantic Rehabilitation\n \n We have more than 900 community-based healthcare providers affiliated through Atlantic Medical Group. \n We have received awards and recognition for the services we have provided to our patients, team members and communities. Below are just a few of our accolades: \n \n • Chosen for 17 years by Fortune as one of the magazine’s “100 Best Companies to Work For." \n, • Atlantic Health Morristown and Atlantic Health Overlook Named by Newsweek as two of the “World’s Best Hospitals” in 2026.\n, • Atlantic Health Morristown and Atlantic Health Overlook ranked within the top three hospitals in New Jersey by U.S. News & World Report’s 2025-2026 Best Hospital rankings. \n, • Atlantic Health scored four “A” grades by The Leapfrog Group in its Fall 2025 Hospital Safety Grades, performance measures reflecting errors, accidents, injuries and injections, as well as systems hospitals have in place to prevent harm. \n, • Atlantic Health Morristown and Atlantic Health Overlook are New Jersey's only hospitals to be named among America's 50 Best hospitals by Healthgrades in 2026.\n, • Named by Becker's Healthcare as one of the "165 Top Places to Work in Healthcare – 2026.\n, • Atlantic Health Morristown, Atlantic Health Overlook, Atlantic Health Chilton and Atlantic Health Newton all Forbes Top Hospitals for 2026.\n, • Named by Newsweek as one of America’s Greatest Workplaces for Inclusion & Diversity 2025.\n, • Atlantic Health rated LEVEL 9 - 2025 CHIME Digital Health Most Wired. \n \n Named one of America's 50 Best Hospitals by Healthgrades, a World’s Best Hospital by Newsweek and recognized as a Best Regional Hospital in the NY Metro area by U.S. News & World Report. \n \n \n Our Atlantic Neuroscience Institute is the region’s leader in neuroscience care. A hub for the New Jersey Stroke Network, we offer a broad range of advanced neurological, neurosurgical and neurodiagnostic services. We are also certified as a Level IV Epilepsy Center and home to the Gerald J. Glasser Brain Tumor Center, where more brain tumor surgeries are performed than anywhere else in New Jersey. Our CyberKnife® program is the largest and most experienced in the state. We also have a satellite emergency department in Union, NJ, which treats about 40,000 emergency cases each year. \n \n \n Committed to providing exceptional care, Overlook Medical Center has achieved the prestigious Magnet® recognition. This designation from the American Nurses Credentialing Center is the highest national honor for nursing excellence. What’s more, Overlook Medical Center has advanced certification from The Joint Commission for perinatal care and is designated an Advanced Comprehensive Stroke Center. Additional Joint Commission-certified services include behavioral health care, spine surgery, wound care, and primary care medical home (PCMH). \n \n Atlantic Health offers a competitive and comprehensive Total Rewards package that supports the health, financial security, and well-being of all team members. Offerings vary based on role level (Team Member, Director, Executive). Below is a general summary, with role-specific enhancements highlighted: \n\n \n\n\n Team Member Benefits\n\n\n \n • Medical, Dental, Vision, Prescription Coverage (22.5 hours per week or above for full-time and part-time team members)\n, • Life & AD&D Insurance.\n, • Short-Term and Long-Term Disability (with options to supplement)\n, • 403(b) Retirement Plan: Employer match, additional non-elective contribution\n, • PTO & Paid Sick Leave\n, • Tuition Assistance, Advancement & Academic Advising\n, • Parental, Adoption, Surrogacy Leave\n, • Backup and On-Site Childcare\n, • Well-Being Rewards\n, • Employee Assistance Program (EAP)\n, • Fertility Benefits, Healthy Pregnancy Program\n, • Flexible Spending & Commuter Accounts\n, • Pet, Home & Auto, Identity Theft and Legal Insurance\n \n \n\n\n Note: In Compliance with the NJ Pay Transparency Act (effective Sunday, June 1, 2025), all job postings will include the hourly wage or salary (or a range), as well as this summary of benefits. Final compensation and benefit eligibility may vary by role and employment status and will be confirmed at the time of offer.\n\n \n EEO STATEMENT \n \n \n Atlantic Health, Inc. is an equal employment opportunity employer and federal contractor or subcontractor and therefore abides by applicable laws to protect applicants and employees from discrimination in hiring, promotion, discharge, pay, fringe benefits, job training, classification, referral, and other aspects of employment, on the basis of race, color, religion, sex (including pregnancy, gender identity and sexual orientation), national origin, citizenship status, disability, age, genetics, or veteran status. \n

The Head of GTM Operations, Americas is the operational backbone of the Mendix & RapidMiner Specialized Sales organization in the Americas. Siemens is a Top 10 Global Software Company and a leader on Fast Company’s Most Innovative Companies in the World! With the acquisition of Mendix in 2018, Sie

Job Description Position Overview: Hudson River Imaging is seeking a skilled and compassionate Mammography Technologist to join our team. The ideal candidate will be experienced in operating the Siemens Revelation mammography system, dedicated to delivering high-quality patient care, and committed to maintaining the highest standards of imaging and safety in accordance with ACR, MQSA, and state guidelines. Key Responsibilities: Perform screening and diagnostic mammography examinations using the Siemens Revelation system. Ensure optimal image quality while minimizing radiation exposure in compliance with ALARA principles. Prepare and position patients for mammographic procedures, ensuring comfort, dignity, and safety. Verify patient identification, review medical history, and explain exam procedures. Collaborate with radiologists, technologists, and clinical staff to support timely and accurate diagnoses. Perform daily quality control and equipment checks in accordance with ACR and FDA requirements. Maintain accurate patient records and documentation in PACS/RIS. Stay current with new mammography techniques, regulations, and continuing education requirements. Qualifications: ARRT (R)(M) certification required. Current state radiologic technologist license. Minimum 1 year of experience in mammography; Siemens Revelation system experience strongly preferred. Knowledge of ACR accreditation standards and MQSA compliance. Strong interpersonal and communication skills with a focus on patient-centered care. Ability to work independently and collaboratively in a fast-paced imaging environment. Preferred Experience: Familiarity with tomosynthesis (3D mammography) workflows. Experience assisting with breast biopsy procedures a plus. Why Join Us: Work with state-of-the-art imaging technology, including Siemens Revelation mammography systems. Supportive, team-oriented environment focused on excellence in patient care.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview: The Lead Mechanical CAD & PLM Engineer owns the configuration and integrity of Thea Energy's products by directly managing the top-level assembly in Siemens NX and creating, maintaining, and enforcing the modeling standards, drafting standards, review workflows, and release process for the company. The role pairs end-to-end ownership of one or more top-level assemblies with process and procedure governance over CAD and PDM standards and processes. These responsibilities will be executed using Siemens NX and Siemens Teamcenter to achieve project goals through a lean, high-performance process adhering to ISO 9001 standards. The Lead Mechanical CAD & PLM Engineer is the single point of accountability for how Thea structures, controls, and evolves its top-level CAD configurations, and for ensuring that the PDM environment remains stable, current, and well-governed as the team scales. The role combines deep CAD authority with system-administrator responsibility, and partners closely with subassembly leads, systems engineering, and engineering leadership. Key Responsibility Areas: 1. Top-Level Assembly Configuration Ownership Assembly Ownership: Serve as the named owner of a designated top-level assembly (TLA), responsible for its structure, release state, and configuration integrity from concept through production. Subassembly Coordination: Partner with subassembly leads to maintain alignment between subordinate models and the TLA, including merge cadence, naming conventions, structural standards, interfaces, space claim, and modeling best practices. Conflict Resolution: Drive resolution of configuration conflicts between subassemblies and ensure design intent preservation across the assembly hierarchy. 1. Cross-Functional Interface Coordination Interface Tracking: Partner with the Systems Engineer to track and document mechanical-to-electrical, mechanical-to-fluid, and mechanical-to-software interfaces relevant to the assigned TLA. Interface Register: Maintain a PDM-based interface register based on an authoritative source that reflects the current physical and logical boundaries between subsystems. Drift Detection: Flag interface drift early including geometry, tolerance, and connector changes and lead the change-control conversation when shifts occur. 1. Teamcenter PDM Operations System Administration: Serve as the system administrator for Teamcenter, accountable for environment uptime, system upgrades, and patch cycles. Licensing: Support negotiations for Teamcenter licensing with Siemens and adjacent partners by providing information on usage and managing seat allocation, and steward annual or multi-year renewals. Feature Lifecycle: Scope, test, evaluate, and roll out new Teamcenter features and modules in response to evolving company needs, in coordination with IT and engineering leadership. PDM Proliferation: Lead integration of Teamcenter into the larger company software stack. For example, PDM interaction with Manufacturing and Test software platforms. 1. Access Control & Workflow Governance Access Control: Own user access and permissions for Teamcenter and Siemens NX, including provisioning, role definitions, and periodic access reviews. Workflow Templates: Define and maintain Teamcenter workflow templates (release, change, review) so that the process is consistent across teams and meets the needs of the team for speed versus complexity. Workflow Auditing: Audit workflow activity, identify bottlenecks, and iterate workflow design with feedback from all company stakeholders. 1. Training & Documentation CAD and Configuration Training: Develop and deliver training on CAD and configuration management practices, including modeling best practices, top-level assembly structure, subassembly coordination, and naming and merge conventions. Teamcenter Usage Training: Build and maintain onboarding and ongoing-use training for Teamcenter, covering navigation, item creation, revision control, and day-to-day data management. Release Workflow Training: Author training and reference materials that walk users through release workflows, including ECO/ECR initiation, review responsibilities, approval routing, and post-release obligations. Best-Practice Documentation: Maintain a living set of best-practice guides and quick-reference documents for the engineering organization, updated as Teamcenter features and CAD practices evolve. 1. Additional Support VFX and Marketing Graphics: Interface with and provide support to VFX and marketing groups for graphics generation, as necessary. Ideal Experience & Skillsets: Bachelor's degree in Mechanical Engineering or a related discipline. Five to seven years of professional experience in mechanical design and CAD, including ownership of complex assemblies in Siemens NX or an equivalent commercial CAD package. Hands-on experience administering Teamcenter or another commercial PLM platform (e.g., Windchill, Enovia). Demonstrated ability to coordinate across engineering disciplines on shared deliverables, including interface management with systems engineering. Working familiarity with engineering change management (ECO/ECR) and release control. Strong written and verbal communication skills, particularly in documenting configuration management and PDM administration practices, and in producing training materials for technical audiences. Preferred Qualifications Direct experience as the named owner of a top-level assembly on a hardware product through release. Prior responsibility for PDM license negotiation or vendor management. Familiarity with Model-Based Definition (MBD), Design-in-Context methodologies, and Product Manufacturing Information (PMI) workflows. Experience designing or auditing Teamcenter workflow templates. Experience developing and delivering technical training for engineering teams (CAD, PDM, or workflow-related). Experience in fusion energy, aerospace, defense, medical devices, or another regulated hardware environment. Familiarity with NX Open or Teamcenter customization (BMIDE, ITK, or comparable). Company Benefits: • Salary range $130,000-$160,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTO It’s not necessary to meet all of the skillsets outlined above. Please feel free to send us a note and tell us why you would still be a great fit for this role or Thea Energy. Diversity and Inclusion: Thea Energy is an equal opportunity employer committed to creating a company of diverse backgrounds. By creating a diverse environment, we will bring new ideas and approaches to solving some of the world’s hardest (and most important) problems. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, family or marital status, age, disability, veteran’s status, or other characteristic protected by applicable laws and regulations. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you w

Location: Jersey City, NYC or Michigan Employment type: Full-time Working model: Hybrid About Neural Concept Engineering is at an inflection point. The teams defining the next generation of aircraft, electric vehicles, and consumer products are not just designing faster. They are designing fundamentally differently, with AI embedded at the core of their workflows. Neural Concept builds the Engineering AI platform that makes this possible. We help the world's leading engineering teams accelerate development, improve product outcomes, and scale engineering capacity, turning months of simulation into days and engineering intuition into data-driven insight. We work with elite engineering teams in Automotive, Aerospace, High-Tech and Electronics, and advanced manufacturing, where the stakes are high, the complexity is rising, and the pressure to innovate has never been greater. We are changing how engineers work. Come build that future with us. As a Solutions Engineer, you sit at the intersection of engineering credibility and strategic influence. You are the person in the room who can connect a VP's business challenge to a concrete, well-scoped AI solution, and who knows Neural Concept's platform and roadmap well enough to make that connection land with confidence. This is not a purely technical role, and it is not a pure sales role. You are a trusted advisor: someone who earns credibility through engineering background and product depth, and who builds long-term account relationships by consistently framing the right problems and the right solutions at the right moment. You drive the full pre-sales motion, from discovery to demo to signed Statement of Work, and you remain the account's technical compass through the client lifecycle, identifying and shaping expansion opportunities. • Position NC as a long-term strategic partner and trusted engineering advisor across engineering teams, managers, and VPs, • Lead structured discovery sessions to identify where NC creates the most impact, framing use cases that are technically feasible and commercially grounded, • Define the AI strategy and technical roadmap for each account, translating NC's capabilities and product direction into a multi-horizon vision, • Create and deliver compelling, client-tailored demos and presentations grounded in the client's engineering workflows, technically credible and aligned with the vision, • Create and co-own the Statement of Work, with deep understanding of the technical building blocks and how these transform the client's existing workflows, • Prepare and run Steering Committees, connecting engineering challenges to strategic outcomes, • Drive user adoption and engagement across technical users, managers, and designers, ensuring NC is embedded in daily workflows and engineering champions emerge, • Identify upsell and expansion opportunities from account knowledge and commercial signals, and shape them into well-scoped proposals, • Collaborate with the Sales team to advance and close deals, with the Forward Deployed Engineering team to ensure smooth pre-sales to delivery transitions, and surface client insights to Product and R&D to inform roadmap priorities, • You hold an engineering degree (mechanical, aerospace, automotive, industrial, or similar) and have a solid understanding of CAD and CAE workflows, including where bottlenecks lie and what it takes to transform those workflows with AI, • You are naturally curious and people-driven. You earn trust through genuine interest in client challenges and make engineers and executives feel understood, • You are proactive and commercially driven. You move accounts forward without being asked, spot opportunities early, and bring structure to ambiguous situations, • You are a confident challenger. You ask uncomfortable questions, reframe assumptions, and guide clients toward better outcomes even when it requires pushing back, • You are an outstanding communicator: you own executive conversations, drive narrative with clarity, and connect engineering problems to strategic outcomes, • You understand AI and machine learning applied to engineering at a conceptual level, and are comfortable creating demos and prototypes using AI-assisted tools with working knowledge of Python and modern development practices, • You have experience in a client-facing role: pre-sales, solutions consulting, technical account management, or engineering consulting, • You are fluent in English, • You have deep, hands-on simulation experience: full pipelines from CAD to post-processing, solver experience, and workflow automation, • You are a strong programmer: you write clean Python, build data pipelines, and are comfortable in ML/DL frameworks including model training, evaluation, and deployment, • You can go deep in technical discovery: dive into customer toolchains, data environments, and simulation setups to assess feasibility at the level a simulation engineer would respect, • You can build end-to-end engineering workflow demos from scratch, rapidly prototyping the full arc from design generation and simulation to data pipelines, model training, and application deployment using agentic development tools, • Strategic or technical consulting background, executing digital transformations, • Previous experience working in engineering software companies or using engineering software tools (e.g., Ansys, Altair, Siemens, Dassault Systmes, or Autodesk), • Background in ML/DL research or development in an engineering context, • Experience automating CAE workflows (scripting, batch processing, surrogate model pipelines), • Work with a world-class technology team. Our engineers are top-notch and we always aim for excellence, • Benefit from a competitive salary and rewarding opportunities as we continue to scale, • Thrive in a collaborative, multicultural environment where your work is visible and recognized, • Develop professionally alongside talented colleagues who share knowledge freely and support one another, • Make a global impact by helping clients shift to AI-assisted design, making innovation faster, smarter, and more sustainable, • Balance life and work with a hybrid model and flexible hours. We care about results, not rigid schedules We're proud to be an equal opportunity employer, and we're committed to building a diverse and inclusive environment where you can thrive.

Candidates should have at least 4–6 years of power systems engineering experience, ideally with an ISO/RTO or utility, and proficiency with Siemens PSS®E, Power Gem TARA, TSAT, and VSAT. An electrical engineering degree or related technical engineering background is required. The roles are fully

Experience managing enterprise application development or enhancement projects as a Technical Program Manager, Technical Project Manager, or similar role. We are seeking a Technical Program Manager to support and enhance our Siemens Teamcenter and NX environment.

We are actively seeking Imaging Engineers at all experience levels to join our dynamic national travel team. As a Traveling Imaging Engineer, you’ll receive a. Siemens, Philips, and GE imaging equipment.

Siemens Opcenter certifications (preferred). Senior Technical Lead – MES (Siemens Opcenter) | Remote (US) with Occasional Travel to Fremont, CA.

A remote ECAD Library Engineer- Siemens Xpedition job is currently available through Belcan at one of our key aerospace clients. To be considered for this role, you will have a Bachelor's degree in Electrical Engineering or related STEM field and 5-10 yrs of relevant experience. Job Duties: • The primary role of this position is to create, in electronic CAD systems, accurate component models per company standards and practices., • Responsible for the creation of CAD symbols and models for printed circuit card and schematic design and for loading appropriate attribute data into several enterprise systems, • Must be able to understand and interpret component drawings and specifications to produce accurate symbols and models including electrical schematic symbols and printed circuit board layout component models and land patterns, • The individual must be able to self-check work to meet part requirements and guidelines., • Familiarity with computer directory structures and file configurations in a Windows operating system is required., • This position requires a high degree or mechanical aptitude, a working knowledge of electronic functions and solid math and geometry skills., • The individual shall work to ensure the CAD symbol/models meet all customer requirements to ensure the fabrication, assembly and test of the circuit card assembly is accurate., • Other responsibilities include relationship building to resolve issues and identify missing data., • Utilize reference documents and apply information to decision making Required Qualifications: • U.S. citizen required, • Bachelor's degree in Electrical Engineering or related STEM field, • 5-10 years of relevant electrical engineering experience, • Ability to work in a structured, process-driven engineering environment, • Experience with Mentor Xpedition EDM Library required Preferred Qualifications & Skills: • Must have a passion for accuracy and customer service, • Must be able to work effectively in a team environment, • Must have strong written and verbal communication skills, • Must be able to demonstrate an ability to continually learn new technologies and processes. We provide a competitive pay and benefits package. This position is offering a salary rate of $115,000-140,000, however, Belcan considers several factors when extending an offer, including but not limited to education, experience, geographic location, and discipline. Benefits offered may include health care, dental, vision, life insurance; 401(k); education assistance; paid time off including PTO, holidays, and any other paid leave required by law. Belcan is an equal opportunity employer. Your application and candidacy will not be considered based on race, color, sex, religion, creed, sexual orientation, gender identity, national origin, disability, genetic information, pregnancy, veteran status or any other characteristic protected by federal, state or local laws. www.belcan.com

Cullerton Group has a new opportunity for an Account Manager – Manufacturing Software supporting a global leader in Smart Factory and Manufacturing Execution System (MES) solutions. This is a permanent opportunity with a competitive base salary, uncapped commission, and excellent long-term career growth. This is also open for remote work. Local Candidates Candidates located in the Greater Chicago Area are strongly preferred. • Onsite during the first 3 months of training, • Hybrid schedule afterward (2 days onsite / 3 days remote) MES experience is preferred but not required for qualified local candidates with strong manufacturing software or industrial software sales backgrounds. Remote Candidates (Non-local candidates) This requirement is non-negotiable. To be considered for a fully remote position, candidates must have: • Extensive Manufacturing Execution System (MES) sales experience, • Proven success selling MES solutions into manufacturing environments, • Ability to contribute with little or no training Compensation Local Candidates (Greater Chicago Area) • $90,000–$100,000 base salary, • Uncapped commission, • Hybrid schedule after training Remote Candidates (Out-of-State) • $115, 000 base salary, • Uncapped commission, • Must have extensive hands-on MES sales experience About the Role We're looking for a motivated, quota-carrying software sales professional who enjoys building relationships and helping manufacturers improve operations through innovative Smart Factory technologies. You'll own the full sales cycle—from prospecting through contract negotiation—while selling Manufacturing Execution Systems (MES), manufacturing software, and industrial software solutions to manufacturers across North America. Responsibilities • Prospect and develop new manufacturing customers, • Build and maintain long-term customer relationships, • Manage a healthy sales pipeline from prospecting through close, • Present and demonstrate manufacturing software solutions, • Develop proposals based on customer requirements, • Negotiate pricing and contracts, • Collaborate with technical and implementation teams, • Maintain CRM forecasts and pipeline activity, • Support trade shows, webinars, and customer events Required Qualifications • Bachelor's degree or equivalent experience, • 3+ years of enterprise software sales experience, • Experience selling one or more of the following:, • Manufacturing Execution Systems (MES), • Manufacturing Software, • Industrial Software, • Smart Factory Solutions, • ERP, • Industrial Automation Software, • Experience selling into manufacturing or industrial customers, • Proven success managing a full sales cycle, • Strong prospecting, presentation, negotiation, and closing skills, • Willingness to travel Preferred Experience • Manufacturing Execution Systems (MES), • Smart Factory, • Manufacturing Operations Management (MOM), • IIoT, • Industrial Automation, • ERP, • SCADA, • Manufacturing SaaS, • Factory Digitalization Experience with platforms such as MPDV HYDRA, Siemens Opcenter, Rockwell Plex, DELMIA, Apriso, Critical Manufacturing, AVEVA, Ignition, or similar MES solutions is highly desirable. Why Join? • Industry-leading Smart Factory technology, • Uncapped earning potential, • Strong career growth opportunities, • Global customer base, • Collaborative team environment, • Competitive benefits package Apply Today If you're passionate about manufacturing technology and enterprise software sales, we'd love to hear from you. Local Chicago candidates are strongly encouraged to apply. Remote candidates must have extensive MES sales experience to be considered.

HCLTech is looking for a highly talented and self-motivated Analog CAD Flow Developer to join it in advancing the technological world through innovation and creativity. Job Title: Analog CAD Flow Developer Job ID: 155232 Position Type: Full Time Location: Remote We are seeking an Analog CAD Flow Developer to support analog and mixed-signal design teams by developing, automating, and maintaining scalable CAD flows, PDK deployment, and design infrastructure. Key Responsibilities: • Develop, deploy, and support CAD flow automation and infrastructure., • Manage PDK installation, version control, deployment, and environment standardization., • Build and maintain Azure DevOps CI/CD pipelines for flow validation, regression testing, and release automation., • Troubleshoot and optimize analog/mixed-signal design flows in Linux environments., • Partner with design and infrastructure teams to deliver reliable and scalable CAD solutions. Required Skills: • Strong Linux administration and troubleshooting experience., • Proficiency in Python and automation development., • Hands-on scripting experience with SKILL, Tcl, Perl, Python, or Ruby., • Experience with Azure DevOps, Git, CI/CD pipelines, and automation frameworks., • Knowledge of Cadence Virtuoso, Siemens Calibre, Synopsys StarRC, and PDK integration., • Strong problem-solving, debugging, and analytical skills. Preferred Qualifications: • Experience supporting analog and mixed-signal IC design environments., • Familiarity with Virtuoso ADE, PDK deployment, flow validation, and release management., • Exposure to AI-assisted development tools such as VS Code and GitHub Copilot. Pay and Benefits Pay Range Minimum: $95000/Year Pay Range Maximum: $192000/Year HCLTech is an equal opportunity employer, committed to providing equal employment opportunities to all applicants and employees regardless of race, religion, sex, color, age, national origin, pregnancy, sexual orientation, physical disability or genetic information, military or veteran status, or any other protected classification, in accordance with federal, state, and/or local law. Should any applicant have concerns about discrimination in the hiring process, they should provide a detailed report of those concerns to for investigation. A candidate’s pay within the range will depend on their skills, experience, education, and other factors permitted by law. This role may also be eligible for performance-based bonuses subject to company policies. In addition, this role is eligible for the following benefits subject to company policies: medical, dental, vision, pharmacy, life, accidental death & dismemberment, and disability insurance; employee assistance program; 401(k) retirement plan; 10 days of paid time off per year (some positions are eligible for need-based leave with no designated number of leave days per year); and 10 paid holidays per year How You’ll Grow At HCLTech, we offer continuous opportunities for you to find your spark and grow with us. We want you to be happy and satisfied with your role and to really learn what type of work sparks your brilliance the best. Throughout your time with us, we offer transparent communication with senior-level employees, learning and career development programs at every level, and opportunities to experiment in different roles or even pivot industries. We believe that you should be in control of your career with unlimited opportunities to find the role that fits you best.

Siemens offers a variety of health and wellness benefits to our employees. Siemens is an Equal Opportunity Employer encouraging inclusion in the workplace. Our mission at Controlling and Finance Assurance (CF A) is to provide objective, factual and independent foresight to help Siemens be excellent

Siemens offers a variety of health and wellness benefits to our employees. Equal Employment Opportunity Statement Siemens is an Equal Opportunity Employer encouraging inclusion in the workplace.

Customer Service Project Manager Data Centers. Siemens Project Management Office (PMO) is looking for a Customer Services (CS) Project Manager to join our Data Centers team. Communication & Stakeholder Management: Communicate effectively with team members, stakeholders, and management, providing re

Tax Counsel – Siemens Transform the everyday with us! The Tax Counsel has the opportunity to lead key strategic initiatives focused on value creation through the analysis and execution of beneficial tax strategies. About Siemens We are a global technology company focused on industry, infrastructur

HospitalHire is seeking a travel Nuclear Medicine Technologist for a travel job in Newark, New Jersey. Equipment: Siemens Nuclear and Spect CT.

Airport Terminal Services - - Responsibilities: lift up to 70lbs per mail handling unit; sort, scan, load/unload USPS mail containers and Airline cans; follow all Safety rules and Regulations; work assigned schedules including weekends and holidays.

Distribution/Materials Handler.The primary purpose of the Distribution/Materials Handler position is to receive and verify all incoming mail, packages, supplies, and other items and ensure prompt and accurate delivery of said items from the mailroom and receiving areas to the appropriate departments

Service Center Warehouse Material Handler.As a Service Center Warehouse Material Handler, you will ensure products get where they need to be.You will receive, store, select, pack, and ship warehouse inventory.Our Zone utilizes a Warehouse Management System so technology is required to perform this j

Material Handler, GWA- 2nd Shift.Location: USA - Carteret, Salt Meadow Rd Division: Solutions.Job area: Terminal/Warehouse/Transport.Position Summary: The General Warehouse Associate is responsible for picking, scanning, labeling, moving, staging, replenishing, and stacking product.This individual i

As a Warehouse Material Handler, you will be responsible for assisting with warehouse operations and ensuring smooth logistics, including: organize inventory and ensure items are stored properly.Finance to provide billing and documentation in a timely manner.Duties and responsibilities can change de