Offres siemens à Atlanta, GeorgiaCréer des alertes d'emploi

Securitas Technology, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services. We offer clients a full portfolio of video, access, intrusion, fire and integrated systems and services. As a leading systems integrator and alarm monitoring company, we deliver the Securitas Technology Difference, serving countless long-term clients with solutions and services that protect their people, customers, and assets. Our service teams are responsible for providing service on Securitas Technology products at client sites. The position provides client contact for all post-installation problems on systems and equipment, as well as, special project work, when needed. Job Duties • Respond to trouble tickets to ensure application uptime and system performance., • Work individually and as a team to diagnose and resolve application issues., • Execute preventative maintenance tasks to maximize application availability and identify system faults., • Perform routine configuration changes (user permissions, application configuration, etc.), • Document all system modifications through a digital change control tracking system., • Produce quality technical documentation describing the conceptual and quantitative facets of system deployment, intended for both a technical and non-technical audience., • Perform pre-deployment end to end testing of all upgrades and major modifications., • High School diploma required or equivalent., • Experience installing and troubleshooting low voltage equipment, • Strong working knowledge of commercial access control, CCTV, burglary alarm, intrusion systems, and fire alarms, • Fire alarm experience:, • Bosch, Silent Knight highly preferred, • Simplex, Notifier, Edwards, Siemens, or other commercial fire systems a plus, • NICET certification or State Fire License preferred, • ESA Certified Alarm Technician preferred, • NTS Certified Service Technician preferred, • Working knowledge of network communications and IP addressing, • Certifications in enterprise grade CCTV, Access Control a plus, • Strong working knowledge of Microsoft Office, • Strong written and verbal communications skills, • Excellent problem solving and analytical skills., • Excellent time management skills, • Paid company training, • Medical, Dental, Vision, and Life Insurance, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday, and sick time, • Educational Assistance, • Exceptional growth opportunities, • Company vehicle, laptop, and cell phone provided, • Wide variety of employee discounts on travel, equipment, and more! We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Securitas Technology, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services. We offer clients a full portfolio of video, access, intrusion, fire and integrated systems and services. As a leading systems integrator and alarm monitoring company, we deliver the Securitas Technology Difference, serving countless long-term clients with solutions and services that protect their people, customers, and assets. Our service teams are responsible for providing service on Securitas Technology products at client sites. The position provides client contact for all post-installation problems on systems and equipment, as well as, special project work, when needed. Job Duties • Respond to trouble tickets to ensure application uptime and system performance., • Work individually and as a team to diagnose and resolve application issues., • Execute preventative maintenance tasks to maximize application availability and identify system faults., • Perform routine configuration changes (user permissions, application configuration, etc.), • Document all system modifications through a digital change control tracking system., • Produce quality technical documentation describing the conceptual and quantitative facets of system deployment, intended for both a technical and non-technical audience., • Perform pre-deployment end to end testing of all upgrades and major modifications., • High School diploma required or equivalent., • Experience installing and troubleshooting low voltage equipment, • Strong working knowledge of commercial access control, CCTV, burglary alarm, intrusion systems, and fire alarms, • Fire alarm experience:, • Bosch, Silent Knight highly preferred, • Simplex, Notifier, Edwards, Siemens, or other commercial fire systems a plus, • NICET certification or State Fire License preferred, • ESA Certified Alarm Technician preferred, • NTS Certified Service Technician preferred, • Working knowledge of network communications and IP addressing, • Certifications in enterprise grade CCTV, Access Control a plus, • Strong working knowledge of Microsoft Office, • Strong written and verbal communications skills, • Excellent problem solving and analytical skills., • Excellent time management skills, • Paid company training, • Medical, Dental, Vision, and Life Insurance, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday, and sick time, • Educational Assistance, • Exceptional growth opportunities, • Company vehicle, laptop, and cell phone provided, • Wide variety of employee discounts on travel, equipment, and more! We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Securitas Technology, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services. We offer clients a full portfolio of video, access, intrusion, fire and integrated systems and services. As a leading systems integrator and alarm monitoring company, we deliver the Securitas Technology Difference, serving countless long-term clients with solutions and services that protect their people, customers, and assets. Our service teams are responsible for providing service on Securitas Technology products at client sites. The position provides client contact for all post-installation problems on systems and equipment, as well as, special project work, when needed. Job Duties • Respond to trouble tickets to ensure application uptime and system performance., • Work individually and as a team to diagnose and resolve application issues., • Execute preventative maintenance tasks to maximize application availability and identify system faults., • Perform routine configuration changes (user permissions, application configuration, etc.), • Document all system modifications through a digital change control tracking system., • Produce quality technical documentation describing the conceptual and quantitative facets of system deployment, intended for both a technical and non-technical audience., • Perform pre-deployment end to end testing of all upgrades and major modifications., • High School diploma required or equivalent., • Experience installing and troubleshooting low voltage equipment, • Strong working knowledge of commercial access control, CCTV, burglary alarm, intrusion systems, and fire alarms, • Fire alarm experience:, • Bosch, Silent Knight highly preferred, • Simplex, Notifier, Edwards, Siemens, or other commercial fire systems a plus, • NICET certification or State Fire License preferred, • ESA Certified Alarm Technician preferred, • NTS Certified Service Technician preferred, • Working knowledge of network communications and IP addressing, • Certifications in enterprise grade CCTV, Access Control a plus, • Strong working knowledge of Microsoft Office, • Strong written and verbal communications skills, • Excellent problem solving and analytical skills., • Excellent time management skills, • Paid company training, • Medical, Dental, Vision, and Life Insurance, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday, and sick time, • Educational Assistance, • Exceptional growth opportunities, • Company vehicle, laptop, and cell phone provided, • Wide variety of employee discounts on travel, equipment, and more! We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Securitas Technology, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services. We offer clients a full portfolio of video, access, intrusion, fire and integrated systems and services. As a leading systems integrator and alarm monitoring company, we deliver the Securitas Technology Difference, serving countless long-term clients with solutions and services that protect their people, customers, and assets. Our service teams are responsible for providing service on Securitas Technology products at client sites. The position provides client contact for all post-installation problems on systems and equipment, as well as, special project work, when needed. Job Duties • Respond to trouble tickets to ensure application uptime and system performance., • Work individually and as a team to diagnose and resolve application issues., • Execute preventative maintenance tasks to maximize application availability and identify system faults., • Perform routine configuration changes (user permissions, application configuration, etc.), • Document all system modifications through a digital change control tracking system., • Produce quality technical documentation describing the conceptual and quantitative facets of system deployment, intended for both a technical and non-technical audience., • Perform pre-deployment end to end testing of all upgrades and major modifications., • High School diploma required or equivalent., • Experience installing and troubleshooting low voltage equipment, • Strong working knowledge of commercial access control, CCTV, burglary alarm, intrusion systems, and fire alarms, • Fire alarm experience:, • Bosch, Silent Knight highly preferred, • Simplex, Notifier, Edwards, Siemens, or other commercial fire systems a plus, • NICET certification or State Fire License preferred, • ESA Certified Alarm Technician preferred, • NTS Certified Service Technician preferred, • Working knowledge of network communications and IP addressing, • Certifications in enterprise grade CCTV, Access Control a plus, • Strong working knowledge of Microsoft Office, • Strong written and verbal communications skills, • Excellent problem solving and analytical skills., • Excellent time management skills, • Paid company training, • Medical, Dental, Vision, and Life Insurance, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday, and sick time, • Educational Assistance, • Exceptional growth opportunities, • Company vehicle, laptop, and cell phone provided, • Wide variety of employee discounts on travel, equipment, and more! We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Direct Hire Opportunity! Senior Automation & Controls Engineer - Food & Beverage Qualifications: • Bachelor Degree in Controls, Electrical, Mechanical or Chemical Engineering or related degree from an ABET accredited program and successful completion of Fundamentals of Engineering (FE) exam and 7 years electrical engineering experience, • EPC project and Automation 7 Controls experience preferred, • Master Degree in Electrical Engineering and 6 years electrical engineering experience, • EPC project experience preferred, • Expert knowledge in standard engineering techniques and procedures, • Strong knowledge of electrical equipment design ANSI and IEEE Standards. Strong computer skills (e.g. Microsoft Office Suite), • Excellent written and verbal communication skills, • Experience with leading the discipline design for large projects and delegating work tasks to team members, • Ability to lead execution of work and resolve issues in a team environment, • Demonstrated critical thinking skills, ability to work methodically and analytically in a quantitative problem-solving environment, • Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills, • Ability to perform quality reviews for detailed engineering documents and specifications, • Ability to travel. accredited program, • Must have or be able to obtain a Transportation Worker Identification Card (TWIC), • Professional Engineer (PE) License Preferred, • This position requires an individual capable of applying intensive and diversified knowledge of principles and practices to broad areas of assignment, • Must be capable of devising new approaches to problems encountered, • Ability to perform quality reviews for detailed engineering documents and specifications, • Knowledge of applicable design standards covering Automation & Controls Design/Engineering such as NFPA, ISA, IEC, IEEE, ISA/IEC 61511, ISO13849, UL508A, • Experienced with variety of control and safety systems (PLC, SCADA, SIS, BMS, DCS), • Experience in Rockwell and Siemens PLC platform. Experience in GE, Modicon, Opto22, Mitsubishi, and Triconex PLC platforms a plus, • SCADA experience with Factory Talk and Wonderware local and distributed systems, Ignition Software is a plus, • MES Design and Implementation Experience a Plus, PTC ThingWorx, Ignition/Sepasoft, Parsec TrakSYS, • Machine safety risk assessment and required PL design compliance to ISO13849 is a plus, • Process safety SIF/SIS design compliance to ISA/IEC 61511 is a plus, • Experience with PlantPAX and PackML is preferred, • Familiarity with tools like SISTEMA, CCW, IAB, BatchSIM, and PlantSIM is desired Senior Automation & Controls Engineer - Food & Beverage Description: • Responsible for compliance with company and project site safety policies, • Design responsibility for all Automation and Controls scope on the project, • Leads a team of Automation and Controls Engineers, Specialists, and Designers in the execution of design, • Interfaces with a multi-faceted project team internally consisting of project manager, electrical, controls, estimating, procurement, construction, and other engineering disciplines, • Responsible for leading and developing software design deliverables including PLC and HMI programming design deliverables as well as Batch, MES, servers and virtualization, • Responsible for commissioning and startup of those design deliverables, • Lead and prepare controls design deliverables, including instrument/device list, I/O list, controls narratives, control panel and controls hardware design, device location plan drawings and installation details, • Lead the specification, design, and procurement activities for control panel and equipment vendors, manage vendor progression, and lead the Factory Acceptance Tests (FATs), • Lead and prepare electrical design deliverables including 480VAC and below equipment and motor power design, installation plan drawings, and conductor schedules, • Determine process instrument measurements protocols, such as temperature, pressure, flow, level, analyzers, and control valves. Utilize knowledge of various technologies for selecting the appropriate controls application, • Experienced in reviewing P&IDs and working with process engineers to define and show proper controls scope of the project, • Develop and manage verification of design, calculations, project studies and report preparation, • Interfaces directly with offsite design office and coordinates and tracks execution of controls deliverables to that office, • Responsible for leading and performing quality reviews of project design submittals and coordinating those reviews within the department, • Responsible for applying knowledge of commonly used automation and controls engineering/design concepts, principles, practices, codes, and procedures within the engineering services industry, • Interfaces directly with construction personnel in development of contracts and execution of work, • Develops project estimates at each project phase through various software such as Proposal works, Integrated Architecture Builder (IAB), SIL Solver, Bluebeam, Excel, and Visio, • Supports project manager in the development and tracking of automation and controls project budgets and expected progress, • Works with clients and vendors directly in developing design, • Builds effective relationships with existing clients, customers and contractors and develop new business opportunities, • Responsible for ensuring customer satisfaction goals and expectations are met, • Has a list of clients that frequently request them for projects or assistance, • Provides leadership, technical direction and development to Automation and Controls team members, • Assists in the day-to-day allocation of resources to their projects, • Coordinate with field personnel to resolve design related installation issues, calculations, field inspections and testing of controls systems, • Responsible for leading the technical execution and team during onsite start-up and commissioning activities, • Responsible for developing and submitting discipline change notices as needed to the project management team, • Fully understands and can execute the EPC project approach, • This position will require making trips to job sites to survey, support installations, and lead startups (travel about 30%), • Work with our business development team to identify and develop key project and customer pursuits, • Frequently attends and hosts client events, • Develops business strategies for future projects, • Understands business needs and profitability factors, • Reviews and develops engineering hour estimates and proposals for all phases of the project, • Supports interviewing and hiring process for new team members, • Coordinates workload with Automation and Controls Department Manager, • Complies with all company policies and standards, • All other duties as assigned

Join this growing Company in the recycling of plastics through the build-out of new plants. Continuous Process in a PSM regulated environment is what you will need to be successful in this role. Corporate role on site in Atlanta, GA. One plant operational, 2nd plant coming online this year and more in the works! Role Overview Our client is seeking an experienced Senior Electrical / Controls Engineer to join their team and support the development of engineering and construction packages for facility expansion and buildouts. The role will be the primary lead on specification and procurement of instrumentation related to process control, process indication, and control system infrastructure. This role reports to Company Electrical Engineering Manager. Responsibilities • Assist with the design and modification of new and existing process control and instrumentation systems., • Specify both discrete, analog, and networked control solutions., • Prepare specifications, design-bid documentation, and construction estimates., • Review supplier designs against licensor requirements, code requirements, and customer requirements. • Develop instrumentation standards to ensure selection compliance across multiple facilities., • Develop maintenance procedures for instrumentation and control systems., • Develop inspection plans for instrumentation and control systems., • Develop commissioning plans for projects and system upgrades as required., • Make recommendations for additional equipment as necessary., • Participate in the review of Management of Changes, PHA Action Requests, Construction Information Requests, and Change Order Requests. • Experience in continuous process manufacturing in all the following project phases: documentation, detailed design generation, implementation, system integration, testing and on-site, startup, using PSM (Process Safety Management) elements and Industrial standards. • Assist with local, state, and federal permitting applications., • Potential to travel to other Nexus locations or vendor locations for meeting or Factory Acceptance Testing (FAT) as required (~10%). • Design and specify 480V distribution infrastructure, motor control centers, VFD panels, PLC panels, RIO panels, and other control panels. • Assist with local, state, and federal permitting applications. Education • BS in Electrical Engineering or extensive documented experience in lieu of engineering degree. Experience • 10+ years previous experience developing PLC programs, using multiple vendor hardware, for process and discrete controls. Rockwell ControlLogix (primarily), Codesys, Siemens TIA Portal. • 7+ years designing electrical control, motor control and heater control panels., • 7+ years’ experience using AutoCAD Electrical., • 7+ years of field installation / construction experience, • Strong background and understanding of P&ID drawings., • Knowledge and experience with applicable NEC, UL / CSA standards for electrical equipment & Electrical construction best practices. • Previous experience with PSM-covered facilities., • Previous experience working with Management of Change (MOC) and Continuous process Improvement programs. • Experience with multiple industrial communication protocols, i.e. Ethernet I/P, Modbus TCP / RTU, Profibus / Profinet, etc. • Industrial Power distribution systems to 480 VAC., • Exposure to Medium Voltage power distribution (4160 VAC or higher). Knowledge, skills, and abilities • Self-starter with strong initiative., • Entrepreneurial spirit and attitude., • Ability to manage multiple projects on different timelines., • Comfortable in a fast-paced, purpose-driven, collaborative environment., • Experience working with multiple outside engineering groups., • Demonstrate a strong desire to learn manufacturing processes. Must be authorized to work in the USA without the need for sponsorship now or in the future.

Senior Engineer Level 2 - EV (Einfochips Inc) We are seeking a motivated and detail-oriented Test Engineer to join our growing team focused on electric vehicle (EV) charging technologies. In this role, you will support the development, validation, and verification of EV charging systems, ensuring they meet performance, safety, and compliance standards. This is an exciting opportunity to contribute to the future of sustainable transportation. What You'll Be Doing: • Assist in the design and execution of test plans for EV charging hardware and software systems., • Set up and maintain test environments including power electronics, communication interfaces (OCPP, ISO 15118), and vehicle simulators., • Perform functional, regression, and stress testing on EVSE (Electric Vehicle Supply Equipment)., • Document test procedures, results, and anomalies in a clear and organized manner., • Collaborate with design, firmware, and systems engineering teams to troubleshoot and resolve issues., • Support compliance testing for industry standards (e.g., UL, IEC, SAE)., • Contribute to continuous improvement of test processes and automation frameworks. What We Are Looking For: • Bachelor’s degree in Electrical Engineering, Computer Engineering, or a related field., • 5-10 years of experience in a testing or validation role., • Familiarity with test equipment such as oscilloscopes, multimeters, and power analyzers., • Basic understanding of EV charging protocols and power systems is a plus., • Experience with scripting languages (e.g., Python, MATLAB) for test automation is desirable., • Strong analytical and problem-solving skills., • Knowledge about EV charging system and technology in term of Hardware and system., • Knowledge about mixed signal design (electrical point of view), • Design the embedded product like EV charger or similar high power, • Knowledge about component level testing , system level testing and product level testing, • Knowledge about pre-compliance and certification testing, • Exposure to EVSE or automotive systems testing., • Knowledge of communication protocols such as CAN, Modbus, or Ethernet., • Work on cutting-edge technology in a fast-growing industry., • Be part of a collaborative and innovative engineering team., • Opportunities for career growth and professional development., • Competitive compensation and benefits package. What’s In It for You: At Arrow, we recognize that financial rewards and great benefits are important aspects of an ideal job. That’s why we offer competitive financial compensation, including various compensation plans and a solid benefits package. • Medical, Dental, Vision Insurance, • 401k, With Matching Contributions, • Short-Term/Long-Term Disability Insurance, • Health Savings Account (HSA)/Health Reimbursement Account (HRA) Options, • Paid Time Off (including sick, holiday, vacation, etc.), • Tuition Reimbursement, • Growth Opportunities, • And more! Work Arrangement Fully OnSite: Must be able to travel to an Arrow Client office location as requested by Arrow Client leadership. Location: Complete On-Site at US-GA- Atlanta (Day-1 Onsite) About eInfochips: eInfochips, an Arrow company (Fortune #154), is a leading global provider of product engineering and semiconductor design services. A rich history of over two decades, with over 500+ products developed and 40M deployments in 140 countries, eInfochips continues to fuel technological innovations in multiple verticals. eInfochips has strategic technology partnerships with Qualcomm, NVIDIA, NXP, Analog Devices, Texas Instruments, Amazon, Microsoft and Google to name a few. Along with Arrow’s $38B in revenues, 22,000 employees, and 345 locations serving over 80 countries, eInfochips is primed to accelerate connected products innovation for 150,000+ global clients. eInfochips acts as a catalyst to Arrow’s Sensor-to-Sunset initiative and offers complete edge-to-cloud capabilities for its clients. Please visit for our portfolio of product engineering services across various industries & verticals. EEO Statement: Arrow is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, gender, age, sexual orientation, gender identity, national origin, veteran or disability status. (Arrow EEO/AAP policy) US-GA-Atlanta-Georgia (Heliox/Siemens Business)) Full timeEngineering Services Arrow is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, gender, age, sexual orientation, gender identity, national origin, veteran or disability status. ___ All Arrow job postings are for existing job vacancies. We anticipate this requisition will be open for a minimum of five days, though it may be open for a longer period of time. We encourage your prompt application.

FAS is looking for U.S. Citizens only for this position. The company is seeking a project engineer with experience designing and commissioning industrial automation controls. You will be an integral team member that implements PLC applications, HMIs, drive systems and information solutions for large manufacturing customers. We are looking for a capable, creative and self-motivated professional who wants a career in automation systems integration. Candidates must have the following qualifications and interests: • BS or MS degree in Electrical Engineering, Mechanical Engineering, Computer/Software Engineering or a similar discipline, • 4+ years of experience designing, programming and commissioning PLC systems, • PLC and HMI experience with Rockwell Automation and/or Siemens equipment, • Experience with VFD’s and motion control, • Interest in becoming a subject matter expert or team leader with increasing responsibilities The following experience or skills are considered a plus for this position: • Experience with manufacturing information systems from Rockwell Automation, Siemens, Ignition or similar solutions, • Experience with Ethernet/IP and other industrial networks, • Experience with machine vision systems and data collection technologies (bar code, RFID) Travel is estimated at 20 – 25%. Founded in 1992, Factory Automation Systems is an industrial automation systems integrator. Located in Atlanta, GA, the company provides turnkey automation solutions to manufacturing companies across the U.S. Our core expertise includes programmable controllers, information systems, robotic systems, variable speed drives and motion control. We deliver solutions to customers from diverse industries – building products, automotive, metals, food processing, chemicals, and more. Factory Automation Systems is an equal opportunity employer and a drug-free workplace. The company offers competitive compensation based on skills and experience. FAS has a comprehensive benefits package with medical, dental and vision insurance, life insurance, paid vacation, paid holidays and a 401(k) plan with company matching. FAS requires a background check for new employees.

Job Description ABOUT THE COMPANY Our founders, food industry veterans Mike and Tisha, knew that food wasn't what it used to be. They wanted to make it better—by creating a new kind of farm. A farm that can grow up to 300 times more food than an open-field farm on a smaller footprint, without use of herbicides, pesticides, or other chemicals that you don’t want in your food. A farm powered with 100% renewable energy, growing with 95% less water and delivering food within 48 hours, for longer freshness for our customers and less food waste. 80 Acres Farms is a vertical farming leader, operating commercial farms in Ohio, Kentucky, and soon Georgia in addition to research and development farms in Arkansas and The Hague, Netherlands. All farms utilize state-of-the-art technology and analytics developed by the company's subsidiary, Infinite Acres. 80 Acres Farms-branded salads, microgreens, herbs, and tomatoes are available at retailers and food service distributors from Michigan to Florida, including Kroger, Whole Foods, The Fresh Market, Dorothy Lane Markets, Sysco, and US Foods. 80 Acres Farms is supported by world-class investors and partners, including General Atlantic, Siemens, Barclays, Ocado, and Signify Philips. If you're interested in making a difference, join our team and help us change how the world eats. POSITION OVERVIEW We are looking for a highly skilled, dedicated, Industrial Maintenance Technician to join and lead our maintenance team in the growing future of indoor farming! The ideal candidate is a self-motivated, team player with great people and collaboration skills, who promotes a team atmosphere, applies root cause analysis principles, and supports process improvements in our fast paced always growing culture. Key responsibilities and duties: • Advanced troubleshooting of mechanical systems and sub-systems, • Advanced electrical troubleshooting of equipment, • Perform preventative maintenance tasks, • Ownership of a functional process area, • Some mentoring and training of less experienced maintenance staff, • Follow all safety and food safety requirements, PPE, LOTO, while culturing a safe work environment, • Provide feedback to Planner on preventative maintenance tasks and schedules, • Perform daily facility walkthroughs and inspections, • Utilize CMMS to open/close workorders, schedule PM’s, create workorders, etc., to meet workflow and compliance KPI’s, • On call availability for off hour critical failures, • Develop and maintain good working relationships with everyone in the organization, • Maintain tools, supplies, and clean organized work areas, • 4+ years of industrial maintenance experience preferred, • Proficiency with electrical: reading schematics, utilizing volt/ohm meter, etc. (120, 240, 480VAC, 24VDC), • Some HVAC/Hydronic experience preferred, • Ability to understand and troubleshoot control components, inputs/outputs, PLC’s, HMI’s, pumps, motors, plumbing, heat exchangers, photoeyes, servo drives, proximity sensors, VFD’s, flow control, timers, etc., • Safe operation of warehouse equipment such as scissor and fork lifts, • Personal Protective Equipment, LOTO, confined space, arc flash, and safety compliance, • Ability to regularly lift, bend, stretch, crawl, utilize manual dexterity, navigate ladders/catwalks, stand and/or walk for long periods of time without limitation, • Lift 75lbs unassisted, • Follow all company policies, procedures, safety, and food safety guidelines, • Flexible working hours, willing to work scheduled, unscheduled, and on call overtime, • Work in non-climate and cold environments, that may be noisy and/or have low lighting, • Deep knowledge of some mechanical and/or electrical systems, • Strong problem-solving skills, • Proficiency with electrical: reading schematics, utilizing volt/ohm meter, etc. (120, 240, 480VAC, 24VDC), • Some HVAC/Hydronic experience preferred (certifications a plus), • Welding preferred: mig, tig, stick, aluminum, stainless steel, • Water & filtration systems, pumps, plumbing, etc., • Preventative and Predictive maintenance to maximize uptime BENEFITS WE OFFER YOU • Health, dental, and vision insurance starting day one of employment, • Minimum two weeks paid vacation, • One week paid health & wellness time, • 10 paid holidays, • Parental leave, • 401k with up to 4% Company match, • Company-paid life insurance, • Short and long-term disability insurance ABOUT OUR HIRING PRACTICES Statistics show that underrepresented communities don’t apply for a job unless they meet 100% of the qualifications. Don’t worry if you think you can’t check every box on the list; we’ll provide all the on-the-job training you need. 80 Acres Farms is an equal opportunity employer. You’re defined by more than just your job title, and we want you to feel comfortable bringing your true self to work. We value your talents, your traditions, your take on the world, and everything else that makes you unique. We strive to be to be a place where a diverse mix of talented people want to come, to stay, and to do their best work. 80 Acres Farms participates in E-Verify. As required by law, your employment with the Company is contingent upon you providing legal proof of your identity and authorization to work in the United States. Employment decisions are made without regard to protected characteristics. All candidates will be given the same consideration.

Mechanical Contractor expanding in the Columbus area- commercial, residential and industrial heating, air conditioning, ventilation and refrigeration systems. This Jobot Job is hosted by: Courtney Hoogervorst Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $100,000 - $150,000 per year A bit about us: A full-service mechanical (HVAC) subcontractor in Ohio that focuses on commercial, residential and industrial heating, air conditioning, ventilation and refrigeration systems. Why join us? • Comprehensive medical, dental, and vision plans, • Competitive PTO package, • Sick Time, • Short Term, and Long Term Disability, • Employee Referral Program, • 401(k) Savings PlanJob Details Currently seeking a Building Automation Sales professional to join a full-service mechanical (HVAC) subcontractor in the Columbus area. We are seeking a proactive and results-driven individual to help drive our mission to create smarter, more efficient buildings. Job Details: • Estimate, plan, specify, and negotiate building automation and energy services solutions in both the new construction and retrofit markets., • Develop long-term business to business relationships with BAS customers by providing consulting support to architects, engineers, contractors, and owners for building control and mechanical systems., • Interface with company engineers and technicians to ensure successful project implementation., • Provide industry presentations and seminars to educate and influence the consulting, contracting, and building engineering communities., • Engineering undergraduate degree or equivalent combination of education and experience, • Building Controls and/or Mechanical systems experience, or familiarity through education if trainee., • Professional business to business sales experience,, • Knowledge of DDC Control Theory & Applications and Mechanical systems, • Familiarity with one or more of the following platforms: Siemens, Schneider Electric, Johnson Controls, Alerton, Delta Controls, Trane, or ALC Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Design-Build Mechanical Contractor This Jobot Job is hosted by: Courtney Hoogervorst Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $35 - $50 per hour A bit about us: Design-Build Mechanical Contractor that provides services through the Intermountain Region Why join us? o Opportunities for career growth, training, and development o Work/Life Balance o 401(k) plan with company match o Excellent medical, dental, vision insurance o Company paid Life and AD&D insurance o Short and Long-Term Disability Insurance o Tuition Reimbursement Job Details We’re seeking a Building Automation Controls Specialist in the Salt Lake area. This role is ideal for someone with strong BAS/DDC experience, who can program, commission, and service advanced building automation systems that integrate HVAC, lighting, security, and energy management. Responsibilities • Program, configure, and commission BAS/controls systems (Siemens or comparable platforms preferred)., • Lead system integrations involving HVAC, lighting, access control, and dashboards., • Troubleshoot and resolve complex DDC controls issues., • Develop and implement graphics, dashboards, and reports for end users., • Mentor junior technicians and provide project team guidance., • Collaborate with project managers, engineers, and contractors to deliver quality projects., • Provide customer training and technical support. Qualifications • 5+ years BAS / DDC experience, with strong HVAC control sequence knowledge., • Familiarity with integration protocols (BACnet, Modbus, LonWorks)., • Proficient in system commissioning, programming, and troubleshooting., • Experience reading mechanical drawings, control schematics, and wiring diagrams., • Strong communication skills and customer-facing experience., • Leadership ability to train or mentor others. Preferred • Niagara N4 certification or other BAS credentials., • Experience with energy dashboards or advanced graphics., • Knowledge of codes and safety practices (OSHA/NFPA). Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Project Manager With Data Analytics Emphasis.Join us in pioneering breakthroughs in healthcare.Our inspiring and caring environment forms a global community that celebrates diversity and individuality.We encourage you to step beyond your comfort zone, offering resources and flexibility to foster you

This position is designed to be a Hybrid role ("Office Based", at least 2 days/week in office is expected) and candidate must be able to work out of one of the following Varian offices: Austin, TX; Atlanta, GA; or Shoreview, MN.

Assurance Associate-Audit (FP&A Focus). About Siemens: We are a global technology company focused on industry, infrastructure, transport, and healthcare.

Audit Associate - Project Controlling (CPM) Focus.

At Jacobs, we challenge what's currently accepted, so we can shape innovative and lasting solutions for tomorrow. Through the delivery of our operations and maintenance services, you'll make it simpler and more seamless for our municipal clients to operate safely and efficiently, empowering communities to focus on what matters most to them - people. The HVAC BMS Technician I, based in Atlanta, GA, will need an understanding of HVAC controls systems, strong overall controls troubleshooting experience, and demonstrated knowledge of maintenance, repair, and replacement of commercial HVAC equipment, including four-pipe AHUs, VAVs, fan coil units, pneumatic and DDC controls and their components. The HVAC BMS Technician I candidate will also be a polished professional with solid communication skills driven to deliver the highest levels of customer service, committed to learning, teamwork, growing your talent and skills, and helping us deliver exceptional HVAC services at the world's premier airport. Duties of the position will be performed on-site during assigned shift hours however, off-hours, weekend, and alternate shift work may be required to accommodate special project requests, inclement weather operations, and other conditions required to ensure service continuity for the airport. Bring your team-focus, adaptability, and commitment to excellence, and we'll help you grow what drives you - and deliver the world's most challenging Operations Management projects, together. * Troubleshooting and repair of complex BAS/BMS and HVAC control systems. * Program, modify, and optimize DDC control logic and sequences of operation. * Analyze trends, alarms, and performance data to improve system reliability and energy efficiency. * Commission and re-commission HVAC and BMS systems. * Coordinate with OEMs, engineers, and contractors during shutdowns, outages, and capital projects. * Participate in after-hours response and emergency plant support as required * Follow all safety, lockout/tagout, and site operational procedures * Basic knowledge or up to 1 year of experience with HVAC controls systems, including exposure to control platforms such as Johnson Controls (Metasys), Honeywell, Trane, Siemens, or similar BMS/BAS systems. * Fundamental troubleshooting skills with commercial HVAC equipment, including air handling units (AHUs), VAV systems, and fan coil units. * Familiarity with work order systems such as Maintenance Connection, Maximo, or similar platforms is a plus. * Basic understanding of HVAC systems and central plant operations. * Working knowledge of low-voltage controls and BAS networking fundamentals. * Strong willingness to learn with good problem-solving skills. * Ability to follow instructions and work both independently and as part of a team. * Valid driver's license. * High school diploma, GED, or equivalent. * Availability to work assigned shifts as needed. Ideally, you'll also have: * Associate degree from two-year accredited college or technical school or equivalent experience preferred. * 2-3 years of experience with HVAC controls systems, including maintenance and knowledge of proprietary controls systems, such as Johnson Controls (Metasys), Honeywell, Trane, Siemens, or similar BMS/BAS technologies. * OEM BAS certifications (JCI, Siemens, Honeywell, Trane) * EPA Universal Certification Safety is a core value at Jacobs. We are committed to providing a safe and healthy workplace for all employees. This position will spend a substantial amount of time performing safety sensitive labor or services Jacobs is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, religion, creed, color, national origin, ancestry, sex (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, medical condition, marital or domestic partner status, sexual orientation, gender, gender identity, gender expression and transgender status, mental disability or physical disability, genetic information, military or veteran status, citizenship, low-income status or any other status or characteristic protected by applicable law. Learn more about your rights under Federal EEO laws and supplemental language.

Must have experience with Siemens MRI Scanners and Phillips MRI Scanners. Specialty: MRI Technician/Technologist.

The Inside Sales Account Manager (ISAM) is the primary sales representative responsible for the achievement of sales objectives and growth targets for our mid market and small medium enterprise customers. As an Inside Sales Account Manager dedicated to Siemens Digital Industries, you will work close

Job Description Experienced BOILER TECHNICIAN for openings in Atlanta, GA. Pay based on experience and knowledge. Local techs needed for for the Atlanta area for long term work. --No per diem/travel. Scheduled forty hour weeks with occasional OT JOB PROFILE: Boiler Technicians troubleshoot and repair burner management systems, safety controls, and combustion systems on commercial and industrial boilers. This includes flame safeguard controls, UDCs, liquid level controls, modulating motors, servo motors, gas pressure switches, fan motors, pressure and temperature sensors and controls, oil metering valves, airflow switches, flame detectors, actuators, ignition transformers, and purge timers from Honeywell, Siemens, Fireye, Cleaver Brooks and other manufacturers. They work with diagnostic equipment such as multimeters, gas analyzers, and computer diagnostic software to verify controls are operating within certain parameters. They measure flue gas readings to tune burner systems for maximum efficiency. They also perform maintenance and repair service to other, related equipment such as deaerator tanks, feed water systems, pumps, and heat exchangers. This job requires moderate physical labor, good verbal and written communication skills, a willingness and aptitude to learn, a valid driver’s license and a successful background check. The candidate must be willing to work overtime as needed to meet production demands. They must possess the ability to read, interpret and follow standard operating and safety procedures. A successful control technician has a good mechanical aptitude as well as a logical mindset to troubleshoot complex systems and isolate faulty components. REQUIREMENTS: Negative DRUG SCREEN REQUIRED - pre-employment and randoms Performs all job responsibilities in alignment with the core values, mission and vision of the organization Performs other duties as required and completes all job functions as per policies and procedures Wears protective clothing and equipment as appropriate. WORKING CONDITIONS: May be exposed to high noise levels and bright lights. May be scheduled as needed including overtime - Scheduled forty hour weeks with Occasional Overtime EXPERIENCE REQUIREMENTS: 3+ years Mechanical, Electrical repair, HVAC, Plumbing PHYSICAL REQUIREMENTS: Pushing/Pulling / Lift - carry > 20 lbs with assistance Reaching above shoulder - Frequently within shift Company DescriptionBased in Nashville TN, Trades Unlimited partners with and supports multiple electrical and mechanical contractors throughout the United States. Trades Unlimited has a focus on Safety and rewards field employees thru a work safe earn safety pay system. Trades Unlimited offers Medical, Dental and Vision plan. Also 401K available after 12 months.

This Jobot Job is hosted by: Kurt Holzmuller Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $100,000 - $145,000 per year A bit about us: We are a leading BAS/BMS Controls provider whose expertise in building controls and energy services as been recognized nationally. Our approach tailors solutions utilizing diverse technologies to enhance the building performance of our customers across multiple industries. We are looking for an experienced controls technician with a strong building automation/HVAC controls background to service our overseas federal projects. You can expect to be overseas between 25-35 weeks per year, typically in 2-5 week increments. While overseas, you will receive an OCONUS bonus, and you will not be overseas during major holidays. Why join us? • Competitive Pay DOE (100-115k base pay + weekly overseas bonus: TOTAL COMP: 140-160k), • Comprehensive Benefits Package, • 401k with a company match + profit sharing, • 2-3 weeks PTO + 1 week sick pay + bankable holidays while OCONUS, • Relocation Assistance if interested in moving to Alabama, • Remote programming work while stateside Job Details MUST HAVE: • Willingness to travel and live overseas for multi-week stints, • Strong BAS/BMS or HVAC controls experience with one or more of the following BAS/BMS systems: Johnson Controls, Siemens, Schneider Electric, ALC, Delta Controls, Distech, Honeywell, or other, • controls programming, • Tridium Niagara (N4), • Active security clearance Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job DescriptionOur End User Automation Specialists are instrumental in building long term customer relationships, solving problems, and making recommendations to improve customer’s building systems. They will develop, build, test, and commission building systems such as HVAC, lighting, power, and monitoring. Duties & Essential Job Functions • Develop, build, test, and commission building controls systems to include programming equipment, condenser water plant sequence of operations, and modifications to the graphical interface., • Participate in controls engineering review and provide input on design to identify gaps in sequence operability., • Leverage Niagara software tools such as the program service, BQL, and service suite to optimize productivity., • Perform in-depth hardware troubleshooting techniques such as accessing defective hardware CLI through a serial connection., • Perform BAS service and maintenance including diagnosing and repairing controls systems malfunctions., • Respond to BAS emergencies during off hours., • Prepare documentation and reports of work status and completion.Basic Qualifications, • At least 2 years of experience with 2 or more BAS controls platforms such as Tridium Niagara, Trane, Johnson Controls, Honeywell, Siemens, or Distech., • At least 1 years of experience in developing, building, testing, and commissioning complete building controls systems including the graphical interface, from the ground up., • Working knowledge of the installation, operation, and repair of commercial HVAC and control equipment., • Working knowledge of electrical circuits and systems., • High school diploma or GED., • Understanding of Cyber Security in commercial networks, • Bachelor’s degree in related field., • Ability to apply automation solutions and troubleshoot complex problems on automated equipment that is new and existing., • Ability to read and understand mechanical, electrical, network and wiring schematics, drawings, and diagrams., • Ability to manage professional email communications., • Ability to manage and maintain a calendar and task management system., • Ability to present a professional, positive, and helpful attitude, always, when interacting with customers and co-workers., • Must possess and maintain exceptional work ethic and punctuality., • Must uphold company values and demand the highest level of conduct from self and others., • Must be a self-starter, with the ability to work as part of a team and independently., • Work involves moderate exposure to elements, such as hot/cold temperatures, dirt, dust, and/or loud noises., • Work environment involves moderate exposure to construction warehouse hazards or physical risks, which require following basic safety precautions. McKenney’s is an Equal Opportunity Employer committed to workforce diversity. Qualified candidates will receive consideration without regard to age, color, religion, sexual orientation, disability, national origin, or gender identity. McKenney’s is a smoke-free and drug-free workplace. Powered by JazzHR 0FAQ0q5Aua

Job DescriptionSummary: • Ref #:H-MRI-CHOA-AN-0422, • Profession: Allied Health, • Specialty: MRI Technician/Technologist, • Job Type: Contract/Travel, • Start Date: ASAP, • Location: Atlanta, GA, • Shift Schedule: 12 hours/Day; 36 hours/week, • Shift Type: Days, • Rate: $1,915/36-hours Requirements: • Active license in GA, • 2+ years of experience in MRI, • travel experience, • Current ARRT (MRI) Cert & BLS, • Must be willing to float, • Must have experience with Siemens MRI Scanners and Phillips MRI Scanners, • Must have the flu vaccination

Job DescriptionMRI Technologist – Travel Position Location: 1001 Johnson Ferry Road NE, Atlanta, GA 30342 Duration: 13 Weeks Schedule: 36 hours per week (3 × 12-hour shifts) Shift: Tuesday – Thursday, 7:00 AM – 7:30 PM Department: Radiology Unit: MRI Floating: Required Scrub Color: Any Color Position Overview We are seeking a skilled MRI Technologist for a 13-week travel assignment in the Radiology Department. The technologist will perform high-quality MRI scans while ensuring patient safety, comfort, and adherence to facility protocols. The candidate must have experience working with multiple MRI platforms and be able to work collaboratively with radiologists and healthcare staff. Roles & Responsibilities • Perform MRI procedures according to physician orders and established imaging protocols., • Operate and maintain Siemens and Philips MRI scanners efficiently and safely., • Prepare patients for MRI procedures by explaining the process and addressing concerns., • Screen patients for MRI safety, including contraindications such as implants or metal objects., • Position patients accurately to obtain high-quality diagnostic images., • Monitor patients during procedures and respond to any complications or discomfort., • Maintain accurate patient records and imaging documentation in the system., • Collaborate with radiologists, nurses, and other healthcare staff to ensure optimal patient care., • Follow all radiation safety and MRI safety protocols., • Ensure MRI equipment is properly maintained and report any technical issues., • Adhere to facility policies, infection control standards, and patient confidentiality regulations (HIPAA)., • Float to other areas within the department if required.Required Qualifications, • Minimum 2+ years of MRI experience, • ARRT (MRI) Certification – Required, • BLS Certification – Required, • Experience with Siemens MRI Scanners, • Experience with Philips MRI Scanners, • Previous travel experience preferred, • Updated resume (showing 2+ years of MRI experience and travel experience), • Two recent MRI Supervisor/Manager references, • Skills checklist relevant to MRI specialty, • Copy of ARRT (MRI) certification, • Copy of BLS certification, • Requested Time Off (RTO) included at time of submissionFacility Requirements, • Nicotine-Free Facility – Candidates must pass a nicotine test along with the drug screen., • Flu Vaccination Required – CHOA requires the flu vaccine with no exemptions, including medical or religious. #TB_HC #ZRHCCompany DescriptionFounded in 2002 by three former Monster.com executives; TalentBurst is an award-winning full-service Staffing Firm working directly with Fortune 500 companies in the US and Canada. We specialize in Contract and Contract to Permanent roles across many industries and have direct/contractual relationships with all our clients. Please visit our website or come meet us at our offices in Natick, MA, Miami, FL, Christiansburg, VA, Vineland, NJ, Houston, TX & downtown San Francisco, CAFounded in 2002 by three former Monster.com executives; TalentBurst is an award-winning full-service Staffing Firm working directly with Fortune 500 companies in the US and Canada. We specialize in Contract and Contract to Permanent roles across many industries and have direct/contractual relationships with all our clients. Please visit our website or come meet us at our offices in Natick, MA, Miami, FL, Christiansburg, VA, Vineland, NJ, Houston, TX & downtown San Francisco, CA

Job Description Experienced BOILER TECHNICIAN for openings in Atlanta, Albany and Savannah, GA. Three sites all requiring full time technicians. Limited to no travel between sites. Pay based on experience and knowledge. Local techs needed for each area (Atlanta, Albany and Savannah) for long term work. --No per diem/travel. Scheduled forty hour weeks with occasional OT JOB PROFILE: Boiler Technicians troubleshoot and repair burner management systems, safety controls, and combustion systems on commercial and industrial boilers. This includes flame safeguard controls, UDCs, liquid level controls, modulating motors, servo motors, gas pressure switches, fan motors, pressure and temperature sensors and controls, oil metering valves, airflow switches, flame detectors, actuators, ignition transformers, and purge timers from Honeywell, Siemens, Fireye, Cleaver Brooks and other manufacturers. They work with diagnostic equipment such as multimeters, gas analyzers, and computer diagnostic software to verify controls are operating within certain parameters. They measure flue gas readings to tune burner systems for maximum efficiency. They also perform maintenance and repair service to other, related equipment such as deaerator tanks, feed water systems, pumps, and heat exchangers. This job requires moderate physical labor, good verbal and written communication skills, a willingness and aptitude to learn, a valid driver’s license and a successful background check. The candidate must be willing to work overtime as needed to meet production demands. They must possess the ability to read, interpret and follow standard operating and safety procedures. A successful control technician has a good mechanical aptitude as well as a logical mindset to troubleshoot complex systems and isolate faulty components. REQUIREMENTS: ● Negative DRUG SCREEN REQUIRED - pre-employment and randoms ● Performs all job responsibilities in alignment with the core values, mission and vision of the organization ● Performs other duties as required and completes all job functions as per policies and procedures ● Wears protective clothing and equipment as appropriate. WORKING CONDITIONS: ● May be exposed to high noise levels and bright lights. ● May be scheduled as needed including overtime - Scheduled forty hour weeks with Occasional Overtime EXPERIENCE REQUIREMENTS: 3+ years Mechanical, Electrical repair, HVAC, Plumbing Experience installing, servicing, and/or repairing any of these below. • Cleaver Brooks, • Lochinvar, • York-Shipley, • Raypak, • Aerco, • Patterson-Kelley, • Oilon, • Gordon-Piatt, • Powerflame, • Autoflame, • Industrial Combustion, • Riello ● Pushing/Pulling / Lift - carry > 20 lbs with assistance ● Reaching above shoulder - Frequently within shift Company DescriptionBased in Nashville TN, Trades Unlimited partners with and supports multiple electrical and mechanical contractors throughout the United States. Trades Unlimited has a focus on Safety and rewards field employees thru a work safe earn safety pay system. Trades Unlimited offers Medical, Dental and Vision plan. Also 401K available after 12 months.Based in Nashville TN, Trades Unlimited partners with and supports multiple electrical and mechanical contractors throughout the United States. Trades Unlimited has a focus on Safety and rewards field employees thru a work safe earn safety pay system. Trades Unlimited offers Medical, Dental and Vision plan. Also 401K available after 12 months.

Job DescriptionCNC Machinist- Fanuc and Siemens controls experience The Primary responsibility of this job is to produce machined parts by setting up, and operating a computer numerical control (CNC) machine; maintaining quality and safety standards; keeping records/logs and communicating actions, irregularities, and needs; maintaining equipment and supplies. Schedule/Hours: 2nd shift- 3PM-11:45PM Monday-Friday Pay rate: $30-33/hr General Description/Purpose: • Plans machining by studying work orders, blueprints, engineering plans, materials, specifications, orthographic drawings, reference planes, locations of surfaces, and machining parameters, interpreting geometric dimensions and tolerances (GD&T), • Programs mills by entering instructions, including zero and reference points; setting tool registers, offsets, compensation, and conditional switches, calculating requirements, including basic math, geometry, and trigonometry; providing part programs, • Sets up mills by installing and adjusting three and four-jaw chucks, tools, attachments, collets, bushings, cams, gears, stops, and stock pushers, indicating vices, tramming heads, • Verifies settings by measuring positions, first run part, and sample workplaces, adhering to standards, • Maintains specifications by observing drilling, grooving, and cutting, including turning, facing, knurling and thread chasing operations, taking measurements; detecting malfunctions, troubleshooting processes; adjusting and reprogramming controls; sharpening and replacing worn tools; adhering to quality assurance procedures and processes, • Troubleshoots and calls for repairs, • Assemble, repair, and fabricate metal parts by operating mechanical equipment, • Assemble parts into sub-units or complete units, • Use blueprints and design sketches to ensure the proper dimensions and tolerance levels of the finished productEssential Knowledge/Skills:, • Must be able to read and interpret simple to complex drawings., • Basic computer skills are desired but not required., • Ability to read and comprehend simple to complex work instructions in English is required., • Ability to successfully communicate with a diverse personnel base is necessary.Qualification Standards:, • CNC experience needed, • Previous experience in operating Controls and Instrumentation, Supply Management, Tooling and Coordination, use of Precision Measuring Instruments is required, • The Production Manager may amend these requirements based upon company requirement(s).

Job DescriptionHermeus is a high-speed aircraft manufacturer focused on the rapid design, build, and test of high-Mach and hypersonic aircraft for the national interest. Working directly with the Department of Defense, Hermeus delivers capabilities that will ensure that our nation, and our allies, maintain an asymmetric advantage over any and all potential adversaries. Hermeus is an aerospace and defense technology company founded to radically accelerate air travel by delivering hypersonic aircraft. The company aims to develop hypersonic aircraft quickly and cost-effectively by integrating hardware-rich, iterative development with modern computing and autonomy. This approach has been validated through design, build, and test of the company’s first combined turbojet-ramjet engine and is now being scaled through its first flight vehicle program, Quarterhorse. Hermeus is also developing Darkhorse — an uncrewed hypersonic aircraft designed to deliver unique asymmetric capabilities to the warfighterResponsibilities: • You will shape the future of commercial supersonic and hypersonic flight. Our team is responsible for the design, testing, and integration of GNC systems, electrical hardware, control software, power distribution, and RF communications., • The Senior Electrical Engineer position requires system-level architects who are also experts in their specialized areas., • As an Avionics Electrical Engineer, you'll take charge of designing and testing custom electrical systems for both ground test and flight applications., • You will ensure the seamless integration and compatibility of your designs at the sub-system and integrated system level., • As a member of the avionics team, you'll have the opportunity to work across disciplines to create control and instrumentation systems for engine, structural, hydraulic, and electrical systems. Minimum Requirements:, • Bachelor's degree in Electrical Engineering, • 5+ years of experience in multiple of the following areas: electrical hardware design, control systems, instrumentation and signal conditioning, digital communication busses, analog design and simulation, power electronics, harness designPreferred Skills and Experience:, • Master's degree in Electrical, Mechanical, Aerospace Engineering or similar disciplines, • Demonstrated project experience with embedded design, device integration, V&V, environmental qualification and/or flight testing, • Familiarity with test and simulation tools (DMM, Oscilloscope, power supplies, SPICE, Ansys), • Experience with electrical and mechanical design and version control software (Altium Designer, Siemens NX, Teamcenter, Capital Harness, Git, Teamcenter), • Experience with avionics devices and protocols (RS-485, ARINC-685, FPGAs, GPS, INS, D38999 style connectors, etc.), • Strong analysis and troubleshooting skills, • Familiarity with aerospace industry standards (IPC-620, MIL-STD-810, MIL-STD-704, MIL-HDBK-516C, MIL-STD-464D, DO-160G), • Experience working with DC power systems (Batteries, Motors, Generators, etc.), • A bias towards action, and a willingness to work hands-on to make it happen, • Engineering project team experience Additional Requirements: We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionDescription: JOB RESPONSIBILITIES The position of Controls Field Technician III is the most senior technician within CLX Engineering. A Controls Field Tech III has mastered the concepts of controls systems and demonstrates the ability to not only work without direct supervision but can lead or direct more junior members of the team when required. Controls Field Technician IIIs are required to travel to clients and work independently troubleshooting and performing basic PLC programming. Ideal candidates are comfortable working in high pressure situations and interact with both external and internal customers to efficiently resolve problems and complete projects. Field Tech IIIs must be able to work effectively with lead Integration Engineers and communicate efficiently with all project stakeholders to ensure the smooth completion of short- and long-term projects. Controls Field Technician IIIs’ work environment may be airports, entertainment or other manufacturing spaces, or our internal Panel Shop. Work tasks range from basic programming to assisting the CLX facility maintain a great, functioning workspace. Controls Field Technician IIIs are an exempt level position reporting directly to the Manager or Director, Manufacturing & Facilities. RESPONSIBILITIES: • Extensive ability to read electrical schematics, troubleshoot issues, and produce electrical prints in design, • Extensive ability to create control panels from electrical prints, • Ability to provide and execute ideas that make control systems more efficient, • Ability to observe systems, locate and resolve issues with control components, • Extensive knowledge of electrical and controls devices and their application in systems, • Knowledge of safety practices (use of PPE, situational dangers), • Proficient use of hand and powered tools (screwdrivers, wrenches, drills, grinders, etc.), • Competent use of electrical testing devices (multi-meters), • Knowledge of common computer software (Microsoft Office, internet, etc.), • Knowledge of professional software used in creating and maintaining control systems (AutoCAD, PLC programming software) and their use in troubleshooting control systems, • High school diploma or AS Degree with equivalent, applied experience, • 5 years experience in the electrical field, • Excellent communication skills with the ability to stay calm in high-pressure situations, • PLC Software (Studio or Logix 5000) or equivalent (i.e., Siemens, Allen Bradley, Mitsubishi), • Ability to drive and have a clean driving record, • Ability to work non-standard hours (nights and weekends), • Ability to travel locally with little or no notice, • Ability to travel non-locally with notice (up to 30%), • Ability to get a passport and pass a background check, • Ability to pass initial and random drug screenings, • Present a professional demeanor and appearance DESIRED QUALIFICATIONS: • AutoCAD, • Bachelor’s degree in Electronics Engineering or equivalent

Job Description Decima International is a professional services company, providing project management and controls services to clients in the United States and the Middle East. Our mission is to become the premier professional services provider across all industry sectors we are engaged in. To accomplish this, Decima International's founders established a simple yet powerful formula: Approach each client engagement as a partnership, create an environment that attracts the most talented professionals and allows them to flourish, and regulate growth to maintain excellence in our service standards. We are looking for a driven and capable Project Manager (Automation, BMS, and Energy Controls) to support the delivery of hyperscale data center projects. This role is unique: you will act as the owner's representative overseeing automation, building management systems (BMS), and energy controls scopes for mission-critical facilities. The ideal candidate combines strong project management rigor with a deep understanding of data center automation, controls, and energy systems to ensure projects are delivered on time, on budget, and in strict alignment with owner standards and operational requirements. We are looking to bring in dedicated individuals with a passion for innovation and talent for multitasking in a fast-paced environment. We will help you grow, pursue, and fulfill what inspires you so we can make big impacts on the world, together. RESPONSIBILITIES • Project Governance: Manage automation, BMS, and energy controls scopes for hyperscale data center projects from design development through construction, commissioning, and handover, ensuring alignment with owner requirements, schedules, and budgets., • Owner's Representation: Act as the owner's representative for all automation and controls-related activities, serving as the primary liaison between the owner, designers, system integrators, general contractors, and commissioning teams., • Design Coordination: Oversee the integration of automation, BMS, electrical, mechanical, and IT systems to ensure seamless operation of mission-critical data center environments., • Schedule & Cost Control: Develop, track, and report on schedules, budgets, and forecasts related to automation and energy controls scopes within large-scale data center programs., • Technical Oversight: Review control strategies, sequence of operations, system architectures, and technical specifications to ensure compliance with owner standards and hyperscale data center performance requirements., • Procurement Support: Support the technical review of submittals and procurement plans for long-lead automation, controls, and energy management equipment., • Risk Management: Identify automation- and energy-related risks impacting data center uptime, redundancy, and scalability, and lead mitigation strategies with project stakeholders., • Submittals & RFI Management: Manage and expedite submittals, RFI's, and field changes related to automation, BMS, and energy controls to prevent schedule impacts and construction delays., • Stakeholder Communication: Prepare and present detailed project status reports, dashboards, and executive-level presentations to owner leadership and program management teams., • Commissioning & Handover Support: Support commissioning and turnover activities to ensure automation and energy systems meet mission-critical and operational readiness requirements. Required Qualifications: • 12+ years of professional experience managing automation, BMS, or controls scopes on mission-critical or large-scale industrial projects., • Demonstrated experience supporting hyperscale data center projects or similar mission-critical facilities (e.g., data centers, semiconductor fabs, critical infrastructure)., • Proven ability to act as an owner's representative in a client-facing, consulting environment., • Strong experience with project scheduling, cost control, and risk management for complex technical systems., • Excellent written and verbal communication skills, with experience presenting to senior client and executive stakeholders., • Bachelor's degree in Electrical Engineering, Mechanical Engineering, Automation Engineering, or a related technical discipline., • Project Management Professional (PMP) certification., • Direct experience with hyperscale data center clients or operators., • Familiarity with leading BMS and automation platforms used in data centers (e.g., Siemens, Schneider Electric, Honeywell, Johnson Controls)., • Experience supporting commissioning and integrated systems testing (IST) for mission-critical facilities., • Experience with Design-Build or fast-track delivery models., • Location: Atlanta, Georgia, • Position: Project Manager (Automation, BMS, and Energy Controls), • Position Classification: Salary-based full-time hours, • Microsoft Office, • Microsoft 365 Decima International is an Equal Opportunity Employer who is committed to the safety and wellbeing of all. All qualified applicants will receive consideration for employment without regard to race, religion, creed, color, national origin, ancestry, sex (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, medical condition, marital or domestic partner status, sexual orientation, gender, gender identity, gender expression and transgender status, mental disability or physical disability, genetic information, military or veteran status, citizenship, low-income status or any other status or characteristic protected by applicable law. At Decima International, we offer a competitive salary package, including paid time off and performance-based bonuses. We also provide excellent medical, vision and dental insurance for our employees.

Job Description Controls Field Service Technician - Atlanta, GA Our client is a Engineering Design and Commissioning Company that has a national footprint and specializes in MEP / Controls and Critical Facilities Design. They provide design, commissioning, consulting and management expertise in the Critical Facilities Space. They have a mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. A fully competent Controls Field Technician - Applies an intensive and diversified knowledge of complete Controls and Building automation systems platforms such as EPMS (Electrical and Power Monitoring Systems), BAS Systems (Building Automation Systems), or BMS System (Building Monitor Systems) in a data center or industrial environment - testing and operations. Responsible for programming, integration, implementation commissioning, maintaining and providing emergency support on critical controls systems at customers' sites within their respective regional area. They will troubleshoot, install, and make upgrades to existing automation systems for power and cooling systems in a live, mission-critical environment. They will assist in complete startup, commissioning, and validation procedures of these systems. They will collaborate with the Electrical and Mechanical Engineering / Design teams, Software Development teams, Project Managers, Construction Contractors, Equipment Vendors, Field Techs and Site Operations teams to ensure the reliability, proper operations, acceptance of new and modified installations, automations and software solutions. Applies an intensive and diversified knowledge of complete BMS, BAS, EPMS - coding, testing and operations. Responsibilities: • Direct and monitor subcontractors (onsite and offsite) including scheduling, resource management and coordination of construction and start-up services as needed. Construction trades generally include various electrical, mechanical and equipment suppliers., • Install and wire BAS controllers and field devices including low voltage cable terminations, • Installation Coordination of BAS / HVAC Controls Systems, • Plan site activities for your team including organize job site materials, logistics, inventory, tools storage and security / access, • Lead installation teams on daily and weekly meetings, • Support the development and execution of additional services through change orders, • Cutover panels and systems in retrofit projects, • Develop and Implement Methods of Procedure (MOPs) for site activities, • Provide input to project team on developing RFIs, estimating and takeoffs for proposals, • Performs commissioning focused design reviews, prepares commissioning test procedures and reports, coordinates and oversees on-site testing, Startup, Commissioning and Closeout of BAS / HVAC Controls Systems, • Assist software lead with pre-functional and functional testing, • Execute troubleshooting of BAS systems including corrective actions, • Participate in commissioning efforts with external stakeholders, • Analyze system operation, work with project team to demonstrate system operation and verify consistency with the contracted scope of work, • Perform QA / QC of BAS and integrated systems using BAS software tools, • Provide installation inspections and other closeout duties to ensure customer acceptance, • Provide markups for shop drawings to document as-built conditions, • Communicate regularly with subcontractors, project managers, clients and commissioning agents on project progress, • Document and track issues and out of scope efforts, • Autonomous in day-to-day work with being given high level instruction on projects or assignments, • Discuss with technical support problems related to maintenance or operation of equipment, • Attend project bid walks, engineering surveys, BAS audits, etc, • QA/QC peer reviews for projects which candidate is not the engineer, • Optimize workflow and deliverables by developing templates, standards, automations, etc., • Communicate regularly with internal and external stakeholders, subcontractors, project managers, AEs and commissioning agents on project progress, • Needs to be located in Pacific Northwest, • Open to traveling to job sites in the region - 75% of the time, • Critical Facilities / Data Center experience a must, • Experience with Distech Controls and Tridium Niagara BAS Platforms highly preferred, • Preferably 3-8+ years experience with BMS /BAS Controls, • Experience with any of the following systems (JCI, Metasys, Siemens, Honeywell, Automated Logic) a plus, • PLC / ALC Experience, • Experience with critical HVAC equipment (Chillers, Air Handlers, CRAC / CRAH units, Boilers, etc.), • Requires knowledge of equipment manufacturer's specifications, • Ability to interpret AE construction drawings, BAS shop drawings, manufacturers wiring diagrams, standards documentation, submittals and product data sheets, • Ability to follow company and site safety requirements, • Must be able to complete Field Service Reports and Assignments accurately and within a timely manner, • Analyze and prepare documents, reports and correspondence, • Candidate must be willing to work nights & weekends when necessary, • MS Office Suite (Excel, Word, Outlook, PowerPoint, Teams), • Previous experience in the Military / Military veterans in all branches that have experience with Electrical / Mechanical is a huge plus (Navy nukes- EMN, ETN, MMNs, Seabees, Army - Power Generation, Air Force – Power Production, Generator Techs, Maritime, Coast Guard, etc.), • Requires excellent verbal, written communication skills & customer relation skills, • Ability to work independently and resourceful with good initiatives, • Client facing experience and at times serve as primary point of client contact on various projects, • Ability to successfully work independently; Self Starter and should prioritize well, • Proactive, resourceful, delegator and a multitasker After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job DescriptionDescription: Position Summary A Level 5 Switchgear Field Engineer leads complex field service activities for medium- and high-voltage switchgear systems, serving as a technical authority on installation, commissioning, maintenance, troubleshooting, repair, and modernization. This role provides on-site leadership, ensures safe work execution, interfaces directly with customers and project teams, and mentors junior engineers/technicians while driving quality, schedule adherence, and continuous improvement. Key Responsibilities • Lead field execution for switchgear installation, commissioning, and service (e.g., air-insulated switchgear, gas-insulated switchgear, metal-clad/metal-enclosed switchgear, breakers, relays, bus, CT/PTs, control power systems)., • Plan and perform advanced diagnostics for equipment and protection/control issues, including intermittent faults and complex system interactions., • Execute and/or direct acceptance, maintenance, and condition-based testing (e.g., insulation resistance, hipot/VLF as applicable, contact resistance, timing/travel analysis, primary/secondary injection, relay logic verification, SCADA/RTU I/O checks)., • Perform protection relay commissioning and end-to-end verification; validate settings implementation per approved setting files and drawings., • Interpret and redline electrical drawings/schematics, wiring diagrams, logic diagrams, and one-lines; verify as-built conditions., • Ensure compliance with all safety requirements (LOTO, arc-flash, energized work restrictions, job hazard analysis, permits) and lead on-site safety briefings., • Troubleshoot and resolve issues related to control wiring, interlocks, auxiliaries, close/trip circuits, charging motors, heaters, and communications., • Direct corrective maintenance and repair activities, including breaker overhaul support, mechanism adjustments, alignment, lubrication, SF6 handling (if applicable), and component replacement., • Provide technical leadership during outages, turnarounds, and critical recovery events; communicate status, risks, and mitigation plans., • Produce high-quality field service reports, test records, punch lists, commissioning checklists, and nonconformance documentation; close out actions with customer sign-off., • Coordinate with PMs, engineering, factory, and supply chain on parts identification, RMA/warranty, technical escalations, and root cause analysis., • Mentor and supervise junior engineers/technicians; review work quality, coach troubleshooting approach, and enforce standards., • Support customer training and knowledge transfer (operational checks, basic maintenance, safety considerations)., • Associate’s or Bachelor’s degree in Electrical Engineering, Electrical/Electromechanical Technology, or equivalent practical experience., • Typically 8+ years of progressively responsible field experience with MV/HV switchgear, breakers, and protection & control systems., • Demonstrated ability to lead field crews and manage on-site execution for complex commissioning/service events., • Strong working knowledge of electrical safety practices (NFPA 70E/OSHA or local equivalents), including LOTO and arc-flash risk controls., • Proven experience reading and troubleshooting schematics, wiring diagrams, and one-lines., • Ability to write clear field reports and maintain accurate test documentation., • Experience commissioning digital protection relays and IEC 61850/GOOSE networks (where applicable)., • Experience with power system studies interface (coordination, short circuit, arc-flash labels) and field validation., • Expert-level troubleshooting skills across switchgear mechanical, electrical, and protection/control domains., • Ability to develop commissioning/test plans, verify I/O, and perform functional checks from drawings and sequences of operation., • Strong customer communication skills, including explaining findings, constraints, and corrective actions in clear, non-technical language when needed., • Working knowledge of common test instruments and safe test setups; ability to validate instrument calibration status., • Strong planning and prioritization skills; ability to manage multiple work fronts during outages., • Ability to lead incident response and structured problem solving (5-Why, fishbone, corrective/preventive actions)., • Primarily field-based at customer facilities (industrial plants, utilities, data centers, commercial facilities, substations)., • Travel typically 50–80% depending on region and workload; may include nights, weekends, and emergency call-outs., • Work may be performed in confined spaces, elevated platforms, hot/cold environments, and around rotating machinery and energized equipment (per safety rules)., • Ability to lift and carry up to 50 lbs (23 kg) and move test equipment and tools., • Ability to stand, kneel, bend, climb ladders/stairs, and work at heights for extended periods., • Breaker test sets (timing/travel, micro-ohmmeters), insulation resistance meters, hipot/VLF sets (as applicable), relay test sets, primary injection systems., • Digital multimeters, clamp meters, torque tools, mechanical gauges, alignment tools., • Laptop-based relay configuration and commissioning software; serial/Ethernet communications tools (as applicable). Reports to a Field Service Manager/Service Operations Leader. May provide day-to-day technical direction to field technicians, contractors, and junior engineers on assigned jobs. Disclaimer The statements above are intended to describe the general nature and level of work being performed. They are not an exhaustive list of all responsibilities, duties, or skills required. Forgent Power reserves the right to modify, interpret, or apply this job description as needed. Equal Employment Opportunity Statement Forgent Power is an equal opportunity employer. We are committed to creating an inclusive environment for all employees. Employment decisions are made without regard to race, color, religion, sex, national origin, age, disability, veteran status, or any other protected class. Requirements:

Job Description Who We Are The Facilities Group (TFG), headquartered in Tampa, FL, is a family of commercial facilities maintenance companies, providing best-in-class service to over 25,000 locations across the country. The Facilities Group partners with the premier local, regional, and national facility service providers while maintaining brand legacy and driving high-powered technology. The Facilities Group family of companies has 17 offices throughout the United States and provides a comprehensive suite of janitorial and maintenance services to a variety of end markets including commercial, distribution, logistics, aviation, education, finance, industrial, and healthcare facilities. Our principle of providing best in class service not only guides how we treat our clients but is also the foundation of our company culture. We understand the importance of maintaining an exciting culture for our employees and believe in creating an empowering professional environment with a sense of community and opportunity. What You Will Be Doing The HVAC Technician supports a mission‑critical, 24/7 airport environment by maintaining, troubleshooting, and optimizing HVAC and mechanical systems across terminals, concourses, and central plant facilities. This role ensures reliable, energy‑efficient, and code‑compliant operation of chiller plants, air handling units, pumps, and related equipment essential to passenger comfort and airport continuity. The technician performs preventive and corrective maintenance, responds to system issues, and documents all work within the CMMS. By safeguarding mechanical system performance, this position plays a key role in maintaining safe, uninterrupted airport operations. HVAC Technician Duties & Responsibilities • Perform preventive and corrective maintenance on HVAC and building mechanical systems supporting a 24/7 airport environment., • Inspect, troubleshoot, and repair air handling units, rooftop units, chillers, cooling towers, pumps, and related equipment., • Operate, maintain, and optimize central chiller plant infrastructure and campus-wide mechanical systems., • Ensure continuous, reliable operation of HVAC systems to support passenger comfort and mission‑critical airport functions., • Meet preventive maintenance and work order SLA targets., • Maintain plumbing system uptime and regulatory readiness., • Ensure backflow documentation is accurate and audit ready., • Reduce repeat failures through proper diagnosis and repair., • Support a strong safety culture with zero preventable incidents., • Diagnose system performance issues and implement corrective actions to restore optimal functionality., • Execute scheduled PM tasks in accordance with manufacturer guidelines, airport standards, and regulatory requirements., • Maintain accurate and timely documentation of work performed using the CMMS system., • Monitor HVAC system performance and recommend improvements for energy efficiency, reliability, and cost effectiveness., • Respond to equipment alarms, service requests, and operational emergencies in a fast-paced, 24/7 facility., • Follow all safety protocols, building codes, and compliance standards related to mechanical system operation., • Collaborate with building operations, engineering, and other airport teams to support uninterrupted facility operations., • Conduct inspections of terminals, concourses, mechanical rooms, and occupied spaces to identify maintenance needs or potential hazards., • Assist in commissioning, testing, and integrating upgraded or newly installed mechanical equipment., • EPA Section 608 Universal Certification (active and verifiable)., • Georgia Conditioned Air License (Class II preferred for unrestricted commercial scope)., • OSHA 10 minimum; OSHA 30 preferred for senior technicians., • NFPA 70E awareness for electrical safety., • OEM training certifications (Trane, Carrier, York, Daikin, Johnson Controls, etc.). This role operates across terminal areas, mechanical rooms, and utility spaces. Work may involve lifting, climbing, confined space awareness, and exposure to heat, cold, and noise. All activities must comply with OSHA regulations, plumbing codes, airport requirements, and site safety policies. The Facilities Group is committed to fostering, cultivating, and preserving a culture of diversity and inclusion. We provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Our commitment extends beyond preventing discrimination and harassment; it’s about creating an environment where diverse backgrounds and perspectives are valued. We believe in the power of our people, the ideas they bring, and what we can accomplish together. Consistent with the Americans with Disabilities Act (ADA), all state & federal requirements, it is the policy of The Facilities Group to provide reasonable accommodation when requested by a qualified applicant or employee with a disability, unless such accommodation would cause an undue hardship. The Facilities Group also provides reasonable accommodations as required under the Pregnant Workers Fairness Act (PWFA) for limitations related to pregnancy, childbirth, or related medical conditions. The policy regarding requests for reasonable accommodation applies to all aspects of employment, including the application process. If reasonable accommodation is needed, please contact the Recruitment Team 813-425-1985. #TFGAHP

Job DescriptionHermeus is an aerospace and defense technology company founded to radically accelerate air travel by delivering hypersonic aircraft. The company aims to develop hypersonic aircraft quickly and cost-effectively by integrating hardware-rich, iterative development with modern computing and autonomy. This approach has been validated through design, build, and test of the company’s first combined turbojet-ramjet engine and is now being scaled through its first flight vehicle program, Quarterhorse. Hermeus is also developing Darkhorse — an uncrewed hypersonic aircraft designed to deliver unique asymmetric capabilities to the warfighter Responsibilities: • You will shape the future of commercial supersonic and hypersonic flight. Our team is responsible for the design, testing, and integration of GNC systems, electrical hardware, control software, power distribution, and RF communications., • The Electrical Engineer position requires system-level architects who are also experts in their specialized areas., • As an avionics electrical engineer, you'll take charge of designing and testing custom electrical systems for both ground test and flight applications., • You will ensure the seamless integration and compatibility of your designs at the sub-system and integrated system level., • As a member of the avionics team, you'll have the opportunity to work across disciplines to create control and instrumentation systems for engine, structural, hydraulic, and electrical systems. Minimum Requirements:, • Bachelor's degree in Electrical Engineering, • 1+ years of experience in multiple of the following areas: electrical hardware design, control systems, instrumentation and signal conditioning, digital communication busses, analog design and simulation, power electronics, harness design Preferred Skills and Experience:, • Master's degree in Electrical, Mechanical, Aerospace Engineering or similar disciplines, • Demonstrated project experience with embedded design, device integration, V&V, environmental qualification and/or flight testing, • Familiarity with test and simulation tools (DMM, Oscilloscope, power supplies, SPICE, Ansys), • Experience with electrical and mechanical design and version control software (Altium Designer, Siemens NX, Teamcenter, Capital Harness, Git, Teamcenter), • Experience with avionics devices and protocols (RS-485, ARINC-685, FPGAs, GPS, INS, D38999 style connectors, etc.), • Familiarity with aerospace industry standards (IPC-620, MIL-STD-810, MIL-STD-704, MIL-HDBK-516C, MIL-STD-464D, DO-160G), • Experience working with DC power systems (Batteries, Motors, Generators, etc.), • Strong analysis and troubleshooting skills, • A bias towards action, and a willingness to work hands-on to make it happen, • Engineering project team experienceAdditional Requirements:

Job Description One Tech Engineering is searching for a Senior Automation & Controls Engineer for a position located in Atlanta, Georgia. The Senior Automation & Controls Engineer will lead and execute Automation and Controls Engineering design activities for minor to major scale Engineering, Procurement, and Construction (EPC) projects in food, consumer products, pharmaceutical, life science, aerospace and industrial facilities. The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor's Degree in Controls, Electrical, Mechanical, or Chemical Engineering or a related degree from an ABET-accredited program, and successful completion of the Fundamentals of Engineering (FE) exam and 7 years of electrical engineering experience. Local candidates preferred or open to relocation. This is not a remote position. Senior Automation & Controls Engineer Responsibilities: • Responsible for compliance with company and project site safety policies., • Design responsibility for all Automation and Controls scope on the project., • Leads a team of Automation and Controls Engineers, Specialists, and Designers in the execution of design., • Interfaces with a multi-faceted project team internally consisting of project manager, electrical, controls, estimating, procurement, construction, and other engineering disciplines., • Responsible for leading and developing software design deliverables including PLC and HMI programming design deliverables as well as Batch, MES, servers and virtualization., • Responsible for commissioning and startup of those design deliverables., • Lead and prepare controls design deliverables, including instrument/device list, I/O list, controls narratives, control panel and controls hardware design, device location plan drawings and installation details., • Lead the specification, design, and procurement activities for control panel and equipment vendors, manage vendor progression, and lead the Factory Acceptance Tests (FATs)., • Master's Degree in Electrical Engineering and 6 years of electrical engineering experience., • EPC project experience preferred., • Expert knowledge in standard engineering techniques and procedures. Strong knowledge of electrical equipment design ANSI and IEEE Standards., • Strong computer skills (e.g. Microsoft Office Suite)., • Excellent written and verbal communication skills., • Experience with leading the discipline design for large projects and delegating work tasks to team members., • Ability to lead the execution of work and resolve issues in a team environment., • Demonstrated critical thinking skills, ability to work methodically and analytically in a quantitative problem-solving environment., • Strong attention to detail, facilitation, team building, collaboration, organization, and problem-solving skills., • Ability to perform quality reviews for detailed engineering documents and specifications., • Ability to travel. accredited program., • Must have or be able to obtain a Transportation Worker Identification Card (TWIC)., • Knowledge of applicable design standards covering Automation & Controls Design/Engineering, such as NFPA, ISA, IEC, IEEE, ISA/IEC 61511, ISO13849, UL508A., • Experienced with a variety of control and safety systems (PLC, SCADA, SIS, BMS, DCS)., • Experience in Rockwell and Siemens PLC platforms.

Job Description We are seeking a motivated and experienced Fire alarm technician to join our team in our Georgia office. In this role, you will provide technical field support and service to our customers. You will be responsible for troubleshooting and resolving customer issues, conducting on site installations and repairs, as well as on-going training for customer personnel. As your employer, we offer an advancement plan, plus we will subsidize 82.5% of the cost of your medical benefits. Other benefits are available for purchase by the employee, i.e. vision, dental, life, etc... New hires receive 15 days of PTO to start beginning January 1, prorated the first year based on hire date. PTO increases with years in service. Employees are paid for 10 company holidays. If you are ambitious and a self motivated professional with a strong background in fire alarm safety products, we would love to have you as part of our team. The Fire Alarm Technician is responsible for the following: • Coordinate with contractors in the process of installation of fire alarm systems sold by our company, • Perform system commissioning on fire alarm systems including loading software programs and implementing modifications as necessary, • Conduct testing and inspect fire alarm systems under maintenance agreements, • Troubleshoot and repair network hardware and software issues, • Identify code and non-conformance issues, • Makes recommendations regarding both systems installations and service contract facilities, • Generate detailed daily reports, using company software, on activities completed, deferred and those requiring further action or material, • Support emergency on-call assignments, • Support 2nd & 3rd shift work The qualified candidate for a Fire Alarm Technician should possess the following requirements: • A minimum of 3 years experience in the installation and maintenance of Fire Safety Products, • Knowledge of Fire alarm system programming, • Certification of Florida Fire alarm system agent (FASA), • Knowledge of Siemens Fire Alarm Equipment, • Support 2nd & 3rd shift work, • National Institute for Certification in Engineering Technology (NICET) Certification Requirements – Level I, • Associates degree in Electronics or related field or equivalent experience in the installation and maintenance of low voltage electronic systems, • Fluent in English, • Must be legally authorized to live within the United States, • Must be legally authorized to work within the United States, • Must be a legal citizen of the United States, • Excellent customer service skills, • Strong verbal and written communications skills, • The ability to read architectural and engineering drawings and prints, • Skilled in the PC applications in a client/server environment, • Ability to work independently and in team environment, • Ability to lift seventy-five (75) pounds unassisted, • Ability to work on a lift up to 40 feet, • Knowledge of safety regulations and procedures, • Must have valid state drivers license and good driving record Compensation details: 24-40 Hourly Wage PIcb6238b7527f-25405-37560711

Job Description The EPMS (Electrical Power Monitoring System) Technician is responsible for the successful integration, configuration, and support of electrical power monitoring solutions within industrial and commercial environments. This role requires knowledge of communication protocols such as Modbus TCP/IP, BACnet IP, and IEC 61850, as well as hands-on experience with electrical systems, network infrastructure, and automation platforms. Key Responsibilities • Commission EPMS solutions, ensuring seamless integration with electrical distribution and monitoring equipment., • Develop and configure communication interfaces using Modbus TCP/IP, BACnet IP, and IEC 61850 protocols to enable data exchange between devices, systems, and enterprise applications., • Metering configuration and testing; Multifunction PMs, Power Quality Meters, Sub-Metering and Branch Circuit Monitoring. Integration of Protective Relays, Breaker Monitoring, UPS, ATS, Generator Monitoring., • Work with Schweitzer Engineering Laboratories (SEL) meters and other industry-standard devices., • Collaborate with project managers, electrical engineers, and IT professionals to gather requirements, define integration strategies, and deliver solutions on schedule., • Troubleshoot communication issues, diagnose network problems, and provide technical support during installation and post-commissioning phases., • Create and maintain project documentation, including system architecture diagrams, network topologies, configuration files, and test procedures., • Conduct training sessions for end-users and operations staff on EPMS functionalities and best practices., • Stay updated on industry standards, emerging technologies, and protocol updates relevant to EPMS and building automation systems. Required Skills and Qualifications • Associate degree or technical certification in Electrical Engineering Technology, Instrumentation, or a related field (or equivalent hands-on experience)., • Solid understanding of three-phase power systems, electrical distribution, and metering principles., • Experience with Schweitzer Engineering Laboratories (SEL) or equivalent intelligent electronic devices (IEDs)., • Familiarity with IEC 61850, Modbus, DNP3, or other industrial communication protocols., • Ability to read and interpret one-line diagrams and control schematics., • Strong verbal and written communication skills. Preferred Qualifications • Experience with leading EPMS software platforms (e.g., Schneider Electric, Siemens, ABB, Eaton)., • Experience with Ignition SCADA, • Certification in industrial automation, networking, or related fields., • Experience with scripting or programming for device integration (e.g., Python, IEC 61131-3 languages)., • Familiarity with additional protocols such as DNP3, OPC UA, or SNMP. Work Environment • Travel required, heavy travel at times. Temporary relocation also possible., • Interaction with engineering, IT, and operations teams in industrial or commercial facilities., • Adherence to safety protocols and electrical standards during site visits and system commissioning. We are 100% employee-owned through an Employee Stock Ownership Plan (ESOP). This is a retirement benefit for our employees that is wholly paid for by the company in addition to 401(k) options for employee contributions. There are approximately 7,000 ESOPs in the United States, governed by the IRS and the U.S. Department of Labor. Research indicates that ESOP companies tend to grow faster in sales and employment. ESOP employees tend to have 2.2 times as much in retirement savings as employees in traditional companies. In addition to an ESOP, we offer medical, dental, vision, life insurance and PTO! This job description is intended to provide information regarding the essential functions and basic duties of this position. It is not intended to be construed as an exhaustive list of all functions, responsibilities, skills and duties that could be assigned. Additional functions and requirements may be assigned by management as it deems appropriate. This document does not constitute a contract and is subject to change at the discretion of Hoffman Building Technologies. No Phone Calls or Drop-Ins Please. EEO Employer/Vets/Disabled

Job Description Controls & Automation Engineer (Senior Level) Position Summary: We are seeking an experienced Controls & Automation Engineer with a strong background in industrial automation systems. This role will focus on designing, developing, and supporting control systems for complex industrial processes, with a heavy emphasis on Siemens platforms. Key Responsibilities: • Design, program, and maintain control systems using Siemens PCS7, • Develop and troubleshoot PLC/HMI applications, • Support system integration, commissioning, and startup activities, • Collaborate with cross-functional teams to deliver automation solutions, • Provide technical support and mentorship to junior engineers, • 10+ years of experience in controls and automation engineering, • Proven hands-on experience with Siemens PCS7 (required), • Strong knowledge of PLCs, HMIs, and SCADA systems, • Experience with system integration and commissioning, • Experience with Siemens TIA Portal, • Background in manufacturing, chemicals, or industrial environments, • Bachelor’s degree in Engineering or related field

Job DescriptionControls Automation PM - Data Center - Atlanta, GA and East Coast Remote This opportunity is with a leading provider of turnkey data center design / build services specializing in mission-critical infrastructure solutions for hyperscale and colocation environments. The firm provides design-build, modernization, and integration services across large-scale programs that power the digital economy / HPC / AI. This career-growth opportunity offers exciting projects with cutting-edge technology and competitive compensation and benefits. We are seeking a Controls Project Manager to lead and act as the point of contact on controls / automation-focused construction projects for hyperscale, colo and enterprise data centers. The ideal candidate will have experience integrating BMS / BAS / EPMS with HVAC / Mechanical / Electrical retrofits, overseeing automation and controls project teams, and interfacing with electrical and mechanical trades from design / build through commissioning and integration. This role requires strong leadership, stakeholder management, P&L, and execution of complex construction projects in live mission-critical environments. Responsibilities: • Lead multi-site, hyperscale data center automation programs ranging from 20 MW to 200+ MW, • Oversee all phases of construction execution, from design-assist through integrated systems testing (IST) and owner turnover, • Manage field teams and subcontractors on BMS, EPMS, PLC / SCADA, and automation scopes, • Manage BAS / Controls with electrical power monitoring (EPMS), distributed control systems (DCS), fire-life-safety, and DCIM platforms, • Coordinate site logistics, factory witness testing, procurement, installation, systems / equipment integration, commissioning / IST and startup activities, • Develop detailed build sequences, integrate prefabrication and modular deployment strategies to meet speed-to-market goals, • Drive program financials including P&L ownership, value tracking, forecasts, change orders, contingency planning, etc., • Chair weekly meetings with owners, general contractors, trades, and commissioning agents to align milestones and resolve issues, • Manage, • Respond to RFPs / RFIs / RFQs and manage any change orders and negotiate adjustments, • Maintain safety, quality, and reliability across all scopes; ensure compliance with project procedures and regulatory requirements, • Develop and submit MOPs, SOPs, EOPs, and project documentation, • Utilize Procore, Primavera P6, MS Project, BIM360, and cost management platforms for reporting and tracking, • Contribute to innovation by integrating AI tools, BIM, and data analytics for continuous process improvement, • 5+ years of experience delivering large-scale mission-critical controls or automation project management, • Bachelor's degree in Engineering, Construction Management, or related field OR equivalent military/industry experience, • Experience with projects with 25-75 MW datacenter builds a plus, • Proven track record managing $2MM–$100MM+ data center construction projects from design through commissioning (level 4 / level 5 ), • Deep knowledge of Building Automation Systems (BMS / BAS), EPMS, and industrial controls platforms like: Siemens, Rockwell, Schneider, Siemens, Ignition, Niagara, etc., • Familiarity with integrated systems testing (IST), NFPA 70E, Uptime Institute Tier III/IV standards, and owner design guides, • Experience managing projects in live mission-critical environments, including retrofits and system integrations, • MOP and SOP development, and turnover documentation (GxP or mission-critical equivalent), • Strong understanding of MEP, SCADA, DCIM, and control system sequencing and functionality, • Experience with protocols including (BACnet, Modbus, OPC-UA, Fieldbus, Profibus), • PMP certification or other relevant credentials a plus, • Solid client-facing and communication skills; ability to interface with internal and external stakeholders, • Highly organized with strong administrative and documentation capabilities, • Proficient in MS Office Suite, Primavera P6, Procore, BIM 360, Bluebeam, and project scheduling tools, • Willingness to travel up to 20-50% to project sites as needed, • Previous experience in the Military / Military veterans in all branches that have experience with Electrical / Mechanical is a huge plus (Navy Nukes - EMN, ETN, MMNs, Seabees; Army - Power Generation; Air Force – Power Production; Generator Techs; Maritime; Coast Guard; etc.) Submittal Instructions: Please apply directly by clicking the link below, alternatively you can forward your resume directly to: After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job DescriptionHermeus is a high-speed aircraft manufacturer focused on the rapid design, build, and test of high-Mach and hypersonic aircraft for the national interest. Working directly with the Department of Defense, Hermeus delivers capabilities that will ensure that our nation, and our allies, maintain an asymmetric advantage over any and all potential adversaries. This role is primarily responsible for the design, build and test of next generation aircraft aerostructures including fuselage, empennage, control surfaces and landing gear. We are currently in the process of designing iterative airframes on the path to hypersonic flight and looking for a Senior Structures Engineer to lead hardware upgrades, clean sheet designs and mentor junior engineers here in Atlanta. Responsibilities: • Lead detailed project planning and drive hardware delivery on aggressive timelines., • Collaborate directly with high level design concepts turning them into detailed designs including final geometry, material selection and DFM., • Design and implement full-stack design to build to testprocesses—factory layout, tooling, test flow, and vehicle integration and test., • Perform analysis of build non-conformances and chart path forward for low rate prototype hardware., • Drive the transition from prototype to production for complex aerospace assemblies., • Ruthlessly question process complexity—delete parts, eliminate waste, simplify flow., • Perform detailed structural analysis and report structural margins., • Develop and run test procedures for flight hardware., • Serve as a force multiplier across production, test, and design teams. Qualifications:, • Strong engineering first principles., • Comfort with CAD, test equipment, hand tools., • You’ve built something that’s flown, broke, or both., • Proven ability to design, build, break, and iterate quickly., • Bachelor's degree in mechanical, aerospace, manufacturing, or related engineering field., • Hands-on experience with physical hardware (internships, labs, project teams all count)., • Familiarity with manufacturing processes (machining, welding, forming, etc.) and GD&T fundamentals. Preferred Skills and Experience:, • Designed and released flight hardware., • Strong GD&T skills per ASME Y14.5., • Familiarity with Siemens Teamcenter and NX., • Familiarity with NX Nastran and Ansys analysis tools., • Familiarity with AWS D17.1 and aerospace welding processes., • Leadership experience on project teams or in mentorship roles., • Experience standing up production lines or test infrastructure in a fast-paced environment. Additional Requirements:, • Must be available to work extended hours and/or weekends as needed to support critical milestones. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Nexus Circular is the commercial leader in advanced recycling technology that converts landfill-bound plastics into circular feedstocks for the production of sustainable virgin plastics for packaging and other applications. Nexus Circular’s end-to-end solution is economically validated as demonstrated by consistent bulk sales of high quality, ISCC Plus circular feedstocks for virgin plastic production. Aligned with global partners who seek proven scalable solutions to meet ambitious plastic circularity goals, Nexus Circular is rapidly expanding its innovation footprint worldwide, moving decisively to address the complex challenges of plastics accumulation in the environment. Nexus has built an outstanding culture. We are looking for people to contribute to a fast-paced, environmentally committed business that is focused on growth and sustainability. We are very collaborative, transparent, data driven, value diverse perspectives and are looking for constructive initiatives and new ideas. We are looking for self-starters and independent thinkers who work collaboratively in teams. Given the growth stage of Nexus, we are also looking for people who are comfortable moving between strategic thinking and executing those ideas to take Nexus to the next level. Job Description: Primary duties and responsibilities include researching, designing, and developing devices and components for process controls. • Extensive knowledge and experience with the selection of Pressure, Temperature, Level and Flow Meters and other instruments used in Process Control., • Specify both discrete, analog, and networked control solutions., • Extensive knowledge and experience specifying of above devices passed on NEC hazardous area classification and known process temperatures. i.e. High temperature components (above 400 C)., • Prepare specifications, design-bid documentation. Review supplier designs against licensor requirements, code requirements, and customer requirements., • Assist with the design and modification of new and existing process control and instrumentation systems., • Assist in the development of instrumentation standards to ensure selection compliance across multiple facilities., • Make recommendations for additional equipment as necessary., • Participate in the review of Management of Changes, PHA Action Requests, Construction Information Requests, and Change Order Requests., • Assist with local, state, and federal permitting applications., • Assist I&C construction activities – identify deficiencies with respect to national standards and project specifications and add to punchlist. Inspect punch list rectification activities, • Witness I&C testing, • Assist with loop checking, documentation checking, plant commissioning and start-up., • Liaise with EPC and equipment suppliers., • Potential to travel to other Nexus locations as required (~10%) Qualifications: • AS or BS in Electrical Engineer, Mechatronics or Automation Engineering, • Minimum 5 years’ experience in a similar role, • Ideally completed process and plant engineering training in a previous role:, • In-depth knowledge/experience of National Electric Code with emphasis on Article 500, • Demonstrate knowledge of Functional Safety (IEC 61508/61511 & SIL levels), • Demonstrate having worked with Management of Change system, • Hands-on troubleshooting Experience: • 5 plus years’ PLC programming and configuration experience, in a process environment, using automation products from Rockwell Software, Siemens, Codesys based equipment., • Controls system design to the component level, • 5 plus years’ experience preforming setup, testing and commissioning Instrumentation in a construction and process environment., • 5 plus years' experience in configuring and testing communications using gateway devices that allow data exchange with multiple industrial protocols including Modbus, Profinet / Profibus, Foundation Fieldbus. Knowledge, skills and abilities: • Self-starter with strong initiative, • Ability to manage multiple projects on different timelines, • Comfortable in a fast-paced, purpose-driven, collaborative environment, • Have the skills needed to operate and maintain, troubleshoot and repair equipment, • Demonstrate a strong desire to learn manufacturing processes Benefits: • Eligible to contribute to Company's Traditional 401(k) or Roth 401(k) upon hire with Company Contribution, • Medical (multiple comprehensive coverage levels), Dental & Vision coverage, • Group Health & Wellness Program, plus special savings on retail items, travel, entertainment, and more through Insperity Works, • Flexible Spending Accounts and Health Savings Accounts, • Basic and AD&D Life Insurance, • Voluntary benefits, including short-term and long-term disability insurance, accident, critical illness and hospital confinement insurance Note: The above statements are intended to describe the general nature and level of work being performed by the incumbent. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required for this position. Nexus Circular Is an Equal Opportunity Employer. Nexus Circular recruits, employs, trains, compensates, and promotes regardless of that individual’s age, race, color, religion or creed, national origin or ancestry, sex (including pregnancy), sexual orientation, gender, gender identity, physical or mental disability, veteran status, genetic information, ethnicity, citizenship, or any other characteristic protected by law. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application, interview process, pre-employment activity, and the performance of crucial job functions. Please contact to request accommodation. Statement to Third-Party Agencies: Nexus Circular only accepts resumes from agencies with which we formally engage their services. Please do not forward any resumes, as Nexus Circular is not responsible for any fees or charges associated with unsolicited resumes.

Job Description Summary The Field Service Technician, Automation will install, commission, maintain and/or repair Ranpak Automation equipment (at various customer locations) while maximizing machine uptime and customer’s satisfaction. This role will also support other administrative duties within the Service and Parts Department. Essential Duties & Responsibilities • Fully accountable for completing the work according to the service work order, • Support the Ranpak Tech Support Hotline when necessary, • Prioritizes working safely at all times and abides by any specific customer requirements, • Responsible for writing detailed and accurate field service reports, • Accountable for timely submission of field service reports and expenses., • Maintains communications with customers and Ranpak personnel about the progress of the job, • Helps to build and maintain professional relationships with various customers, • Responsible for keeping the tools and other equipment (e.g. service van) in good condition, • Responsible for a clean and tidy machine/working place when leaving the customer’s location, • Actively contributes to a professional and profitable service organization, • Other duties as assigned by manager Qualifications · Formal electrical/mechanical training from a university or technical school is preferred, or 4 years’ experience with industrial automation maintenance & troubleshooting. · Ability to travel within North America on short notice, ramp up to 50-70% travel is expected · Strong mechanical/electronic skills to analyze and resolve problems of complex machinery · Able to understand and work with PLCs of different vendors (e.g. Siemens, Beckhoff, etc.) · Logical and solution-oriented thinking · Self-Motivated, aspiring to improve technical knowledge and keep skills sharp. · Ability to read blueprints, schematics, and technical drawings · Good verbal & written communication · Experience with SAP or similar ERP systems · Highly focused on customer service and exceeding client expectations · Above average use of computer applications like MS Office · Flexible working hours to meet customer needs. Occasional weekend and off-shift hours Supervisory Responsibilities: No Physical Demands and Work Environment: Office Setting · Choice of sitting or standing or alternating between them (stand-up desk optional) · Keyboarding/typing on a computer for extended periods of time · Moderate noise, i.e., phones, printer, light foot traffic Ranpak is an equal opportunity employer and is committed to providing a workplace free from harassment and discrimination. We celebrate the unique differences of our employees because that is what drives curiosity, innovation, and the success of our business. Ranpak does not tolerate discrimination on the basis of race, religion, color, national origin, gender, sexual orientation, gender identity or expression, age, marital status, veteran status, disability status, pregnancy, parental status, genetic information, political affiliation, or any other status protected by the laws or regulations in the locations where we operate. Accommodations are available for applicants with disabilities. This policy applies to all employment practices within our organization, including recruiting, hiring, promotion, termination, layoff, recall, leave of absence, compensation, benefits, and training. Ranpak makes hiring decisions based solely on qualifications, merit, and business needs at the time. For more information, we invite you to read our Code of Ethics. Ranpak participates in the E-Verify program in certain locations as required by law. Learn more about the E-Verify program here.

Job DescriptionRole Summary Our client, a high-volume manufacturing organization (with experience in automotive or similar industries), is seeking a Controls & Automation Engineer to support and enhance plant-wide control systems and automation initiatives. This role is responsible for maintaining, designing, and optimizing control systems while contributing to advanced manufacturing efforts, including data integration and emerging plant-level AI applications. Key Responsibilities Controls Engineering * Maintain reliability, integrity, and performance of machine and equipment control systems across the facility * Design, program, troubleshoot, and optimize PLC-based control systems * Develop, maintain, and modify PLC programs (e.g., Rockwell SLC 500, Logix 5000, Siemens Step 7) * Implement ladder logic and function block programming * Develop and support SCADA systems interfacing with PLCs and SQL databases (e.g., Ignition platforms) * Diagnose and resolve control system issues related to production, maintenance, or customer requirements Automation Engineering * Plan, design, and coordinate automation solutions for new and existing manufacturing equipment * Lead end-to-end automation system integration, including robotics, vision systems, servo motion control, and automated material handling * Develop standardized automation architectures to improve scalability, reliability, and maintainability * Support digital manufacturing initiatives, including data collection, system connectivity, and integration with enterprise platforms (e.g., MES, SQL databases, reporting tools) Electrical & System Design * Develop equipment specifications with a focus on electrical and controls systems * Create and review electrical schematics, panel layouts, and control cabinet designs * Support industrial PC systems, servers, and networking infrastructure, including Ethernet/IP, ProfiNet, and related protocols Operational Support & Continuous Improvement * Partner with production and maintenance teams to support daily operations and continuous improvement efforts * Identify and implement enhancements to improve safety, quality, uptime, and operational efficiency * Mentor and train maintenance and engineering personnel on controls and automation systems * Complete required training and perform additional duties as assigned by engineering leadership Required Qualifications * Bachelor’s degree in Engineering (Electrical, Controls, Automation, Mechatronics, or related field), or equivalent experience * Candidates without a degree may be considered with 7+ years of relevant experience * Minimum of 5 years of manufacturing experience, preferably in automotive or other high-volume environments Technical Skills: * PLC programming (Rockwell, Siemens) * SCADA development and maintenance (Ignition preferred) * MS SQL and data-driven automation * Industrial networking and communications * Robotics and automated systems integration * Electrical design and documentation * Experience with Python programming Core Competencies: * Strong troubleshooting, analytical, and root-cause problem-solving skills * Ability to clearly communicate technical concepts * Effective time management and customer-focused mindset * Ability to work in a collaborative, team-based environment Preferred Qualifications * Experience supporting plant-level digitalization or AI-driven manufacturing initiatives Compensation & Work Model * Onsite role with potential relocation assistance

Job DescriptionSalary: Geek+ is a global leader in robotic solutions for logistics. We develop Autonomous Mobile-Robot (AMR) solutions to realize flexible, reliable, and highly efficient automation for warehouses and supply chain management by automating various laborious tasks like picking, moving, and sorting. We've led the global AMR market share for three consecutive years, being declared the world's no. 1 AMR leader. The North American headquarters in Atlanta, Georgia will continue to power our growth in Canada, United States and Mexico. To meet the demand for its solutions we are looking to add a talented and driven Technical Service Engineer to join our team. This position is open to ourMarkham, ON Canada OR Suwanee, GA USA office on a hybrid model. Job Responsibilities • Provide onsite and remote technical support for robotic automation systems, including AMR and robot shuttle (G2P) solutions., • Perform system commissioning, troubleshooting, repair, and preventive maintenance during deployment and ongoing service phases., • Diagnose hardware, electrical, mechanical, and software issues using system logs, diagnostic tools, data analysis, and onsite observation., • Respond to service tickets and escalations, ensuring timely resolution and clear, professional communication with customers., • Collaborate closely with Product and R&D teams to resolve complex, system-level technical issues., • Collect, document, and analyze field issues, including root cause analysis (RCA) and corrective actions, to support continuous product and service improvement., • Deliver technical training and operational guidance to customers, partners, and internal teams as required., • Adhere to established service processes, safety procedures, and documentation standards., • Travel to customer sites as required, including domestic and international travel, depending on project needs., • Translate advanced robotics and automation technical knowledge into practical solutions, documentation, and training materials. Required Qualifications • Bachelors degree (4-year) in Robotics, Engineering, Computer Science, or a related technical field, or equivalent practical experience., • Hands-on experience with robotic systems, automation equipment, or related electromechanical systems., • Strong troubleshooting skills across hardware, electrical, mechanical, and software domains., • Ability to work independently in customer-facing environments., • Strong verbal and written communication skills in English., • Demonstrated teamwork, customer service orientation, and willingness to learn. Preferred Qualifications • Experience with PLC systems (e.g., Sick, Siemens, Allen-Bradley/Rockwell)., • Knowledge of industrial networking and communication protocols (e.g., Ethernet/IP, ProfNet, TCP/IP)., • Familiarity with Linux-based systems, command-line tools, and log analysis., • Understanding of warehouse automation, material handling, or intralogistics systems., • Ability to read and interpret electrical schematics and mechanical drawings., • Prior experience delivering technical training to customers or internal teams., • Bilingual proficiency in Mandarin and English is highly desired, to support cross-regional teams and customers. Expectations • Must be bilingual in Chinese and English, • Demonstrateprofessionalism, collaboration, and customer focus in all interactions., • Willingness and ability to travel up to 50%, domestically and internationally, based on business and project requirements., • Must be legally authorized to work in the United States or Canada, as applicable to the work location. Equal Employment Opportunity Statement Geekplus is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status, or any other characteristic protected by applicable federal, state, or local laws.

Our mission at Controlling and Finance Assurance (CF A) is to provide objective, factual and independent foresight to help Siemens be excellent and to improve the overall success of the company. As a business partner to Siemens management, we leverage our expertise in a wide range of topics in order

Varian Medical Systems, a Siemens Healthineers company is seeking a Sr Qt Customer Service Program Manager to support from our site in Atlanta, Georgia. How We Work: When you join Siemens Healthineers, you become one in a global team of scientists, clinicians, developers, researchers, professionals,

If you are concerned that an offer of employment with Siemens Healthineers might be a scam or that the recruiter is not legitimate, please verify by searching for the posting on the Siemens Healthineers career site. Siemens Healthineers is an Equal Opportunity and Affirmative Action Employer encoura

Siemens is an Equal Opportunity Employer encouraging inclusion in the workplace. Siemens follows Pay Transparency laws. Here at Siemens, we take pride in enabling sustainable progress through technology.

Position must have full access to Siemens Healthineers' client sites to perform the essential functions of this position. Equal Employment Opportunity Statement: Siemens Healthineers is an Equal Opportunity and Affirmative Action Employer encouraging diversity in the workplace. Reasonable Accommodat