Trabajos siemens en Union, New JerseyCrear alertas

Senior Controls Engineer - Springfield, NJ A growing automation systems integrator specialising in custom machine building and full systems integration is looking for a Senior Controls Engineer to anchor its engineering team in Springfield, NJ. This is a hands-on technical leadership position suited to an experienced professional who can take complex projects from concept to completion - shaping system architecture, leading the programming effort, and running commissioning, all while coaching less-experienced engineers and acting as a go-to technical advisor for customers. The successful candidate will bring deep practical expertise, sound decision-making when requirements are unclear, and the confidence to lead through influence within a lean, fast-paced team. Key Responsibilities • Technical Leadership: Act as lead engineer on complex, multi-disciplinary builds - owning key architecture decisions, setting the technical direction, and guiding engineers and technicians from initial concept through to commissioning., • Advanced Programming: Design and build PLC, HMI, motion control, robotics, and vision applications across leading platforms such as Allen-Bradley, Siemens, FANUC, UR, Cognex, Keyence, and Beckhoff., • Standards & Best Practice: Create and maintain engineering standards, reusable code libraries, and documentation templates that lift quality and consistency across the project portfolio., • System Integration: Oversee the integration of control systems into existing manufacturing lines, coordinating mechanical, electrical, and software workstreams to deliver efficient, reliable, and maintainable solutions., • Commissioning & Troubleshooting: Lead on-site start-up, system analysis, and advanced fault-finding, resolving the most difficult integration and performance challenges to keep equipment running at its best., • Mentorship & Support: Guide junior and mid-level engineers, run design and code reviews, and provide expert support and training to internal teams, technicians, and customers., • Project Execution: Manage project schedules, budgets, and vendor relationships, controlling scope and change orders to deliver on time and on budget., • Compliance & Safety: Ensure every project meets regulatory requirements and follows strict safety practices, including applicable UL 508A and industrial electrical safety standards. Qualifications • Education: A bachelor's degree in electrical engineering, mechanical engineering, computer science, or a related technical discipline is required., • Experience: At least 8 years in controls engineering, ideally within industrial, manufacturing, systems integration, or custom machine-building settings, with a proven record of running projects independently from concept to commissioning., • Technical Proficiency: Extensive, hands-on PLC programming and configuration skills. Rockwell platform experience is strongly preferred, with Siemens and/or Beckhoff proficiency also valued. A solid grounding in robotics, motion control, vision systems, sensor integration, and data acquisition is essential., • BOM & Documentation: Expert-level handling of structured BOMs and full electrical drawing packages across the complete project lifecycle., • Delivery Track Record: Consistent success delivering on time and on budget in a project-based or job-shop setting, including ownership of change-order processes., • Small-Shop Mindset: Comfortable in a lean, self-directed environment - happy to wear multiple hats and take full ownership of outcomes. Previous experience with an integrator or custom machine builder is a strong advantage., • Communication: Clear, direct communicator with internal teams, customers, and vendors, able to translate complex technical detail for different audiences. What's on Offer • Competitive salary with annual bonus potential and a clear path toward career growth and technical leadership., • A collaborative, low-bureaucracy culture where individual decisions carry real weight., • Exposure to a wide range of industries and machine types - no two projects are alike., • A team that takes pride in craftsmanship, accountability, and continuous improvement. Core Values • Champion the Customer: Build genuine partnerships, do the right thing, and win as a team., • Own It: Take accountability, work the problem, and drive results., • Deliver Excellence: Take pride in the work, bring expertise, and sweat the details., • Spark Innovation: Stay curious, embrace challenges, and keep growing., • Stronger Together: Respect, support, and look out for one another.

We are seeking an experienced 1st Shift Automation & Controls Technician to support and maintain automated manufacturing and facility systems in a fast-paced industrial environment. The ideal candidate will have strong PLC, SCADA, electrical troubleshooting, and preventive maintenance experience, along with a commitment to safety and operational excellence. Key Responsibilities • Program, troubleshoot, and maintain PLC and SCADA systems., • Diagnose and repair electrical, automation, and industrial equipment issues., • Read and interpret electrical schematics, blueprints, and technical documentation., • Perform preventive maintennce, inspections, and equipment testing., • Support control system design, documentation, and continuous improvement initiatives., • Ensure compliance with electrical safety, lockout/tagout (LOTO), and arc flash procedures., • Collaborate with maintenance and operations teams to maximize equipment reliability. Qualifications • 3+ years of experience with industrial automation, PLC programming, and troubleshooting., • Experience with Allen-Bradley, Siemens, or similar PLC platforms., • Strong understanding of electrical systems, controls, and industrial equipment., • Knowledge of NEC, OSHA, NFPA 70E, and electrical safety standards., • Ability to work independently and as part of a team., • Comfortable performing physically demanding tasks, including climbing, lifting, and working in confined spaces., • Available for paid overtime Preferred Qualifications • Associate degree or technical certification in Electrical Technology, Engineering, or related, • Experience with SCADA systems and HMI development., • Electrical maintenance certifications., • Experience with pneumatic, hydraulic, or welding systems., • Bilingual English/Spanish is a plus. Apply today to join a growing organization focused on safety, reliability, and continuous improvement.

Job Title: Engineering Manager Location: Remote w/ travel Salary: $150,000-$180,000 + Bonus, Benefits and Travel Paid Skills: Industrial Automation, Controls Engineering, Control Systems About the Company / The Opportunity: Join a dynamic company in the control systems and automation industry that delivers advanced automation and control-system solutions for industrial, energy, life sciences, and mission-critical clients. This Engineering Manager role offers the opportunity to lead technical delivery across complex control-system projects, shape engineering standards and practices, and mentor high-performing teams while partnering with project management and business development to drive successful outcomes. The position blends technical leadership, project execution, and people development and may require travel to customer sites as project needs dictate. Responsibilities: • Lead technical delivery and engineering execution across multiple automation and control-system projects simultaneously, ensuring scope, schedule, and budget objectives are met., • Define, review, and approve system architecture and control-system designs, driving robust integration strategies and technical decisions., • Develop and implement company-wide engineering design philosophies, standards, and best practices to improve quality and consistency., • Collaborate with project managers, business development, and stakeholders to support technical proposals, presentations, and solution strategies., • Provide expert technical guidance to project teams on engineering, operational, and financial considerations, including risk mitigation., • Ensure adherence to quality management systems, safety standards, and continuous improvement in engineering workflows and documentation., • Lead, mentor, and develop engineering staff, managing workloads, performance feedback, staffing, and career progression. Must-Have Skills: • Bachelor’s degree in Electrical Engineering, Mechanical Engineering, Computer Science, or related technical discipline., • Typically 10+ years of experience in industrial automation, controls engineering, or systems integration environments., • Advanced knowledge of control systems design, automation platforms, PLC/DCS/SCADA integration, and industrial system integration principles., • Proven experience leading engineering teams and delivering complex automation projects., • Proficiency with project management tools such as Microsoft Project and strong ability to manage scope, schedule, and budget., • Excellent communication and stakeholder management skills across technical and executive audiences., • Commitment to quality, safety, and regulatory compliance in engineering delivery. Nice-to-Have Skills: • Professional Engineering (PE) license, PMP, or relevant industry certifications (e.g., ISA)., • Hands-on experience with major PLC and control platforms (e.g., Rockwell, Siemens, Honeywell, Emerson)., • Familiarity with contract management, commercial considerations, and proposal development., • Willingness and ability to travel to client sites as project needs require (up to ~50%).

Job Description: This is a systems-level role requiring a strong hardware background and prior experience in the following areas: · Design of complex high-speed digital circuit card assemblies, including PCIe · Leading and mentoring junior engineers · Supporting testing and troubleshooting of systems, modules, and sub-assemblies, working closely with program engineering teams · Collaborating with Engineering, Operations, Quality, and other teams to drive root cause analysis and defect resolution · Driving improvements in product and test design to reduce cost, improve yield, and increase throughput · Creating and reviewing technical documentation such as test procedures, drawings, specifications, reports, and ECOs · Interfacing with government customers and suppliers as needed · Providing training and support to technicians and manufacturing teams · Supporting Root Cause and Corrective Action (RCCA) activities · Mentoring peers and junior engineers Required Education, Experience & Skills: · Experience in Model-Based Systems Engineering (MBSE) · Hands-on experience with MATLAB/Simulink · Experience with airborne actuators · Bachelor’s degree with 5+ years of relevant experience (or equivalent) · High-speed digital circuit card design experience · Experience in design, integration, and testing of complex electronic systems · Strong understanding of electrical engineering principles and problem-solving Preferred Skills: · Industrial temperature digital circuit card design · FPGA-based circuit card design · Experience with embedded processors, PCIe, Ethernet, 1553, SERDES, Fiber Optic, DDR3/DDR4 · Experience with CAD tools (Mentor/Siemens Xpedition) · Pre- and post-layout simulation using HyperLynx · Ability to guide layout and routing rules · Strong technical communication and documentation skills · Proven ability to meet challenging design requirements · Leadership qualities and ability to work in a team environment · Strong analytical and problem-solving skills · Ability to own tasks and drive them to completion · Experience presenting technical information to stakeholders

Job Description Electrical Test Technician Kearny, NJ $25-$30/hr + overtime First Shift 7am-3:30pm Monday-Friday Direct Hire Role-Union Facility Primary Job Duties -Performs electrical product testing in a manufacturing setting -Performs product and system repair and preventive maintenance as required -Performs verification checks on electronic instruments -Writes procedures for test and inspection -Investigates and troubleshoots parts -Follows established safety procedures -Responsible for quality as related to job duties and has the authority to address issues of quality at any level -Experience with electrical testing equipment such as Ratiometers, Hi-Pots, Volt meters. -Knowledge of Siemens power configurations a bonus. Qualifications -High school diploma or equivalent qualification AS degree in electronics preferred or minimum 2 years equivalent experience

Job DescriptionMRI Technologist - Maplewood, NJ (#3442) • Location: Maplewood, NJ., • Employment Type: Full-time., • Hourly Rate: $40/hr - $45/hr. About Greenlife Healthcare Staffing:Greenlife Healthcare Staffing is a leading nationwide recruitment agency dedicated to connecting healthcare professionals with top-tier opportunities. We partner with hospitals, clinics, nursing homes, multi-specialty groups, and private practices to match talented individuals with roles that align with their skills and career goals. Position Overview:Greenlife Healthcare Staffing is seeking a full-time MRI Technologist to join an Imaging Office at a Radiology Group in Maplewood, NJ. This role requires an experienced professional with significant MR work experience, particularly with high-field magnets. The position offers a highly competitive hourly rate and the opportunity to train in and perform remote MRI scanning. Why Join Us? • Competitive Compensation: $40/hr - $45/hr., • Comprehensive Benefits:, • Medical, dental, and life insurance., • 401k / pension., • Profit-sharing plans., • Generous paid time off policy and more., • Work Schedule: Full-time position., • Professional Growth: Gain valuable experience in a collaborative, innovative, and supportive environment., • Impactful Work: Contribute to a mission-driven organization dedicated to improving patient outcomes. Qualifications: • Education: Graduate of an accredited Radiologic Technology or MRI program., • Licensure: ARRT(MR) certification required., • Experience: 1 year of MR work experience required; high-field magnet experience is a must; GE high-field magnet experience preferred; Phillips and Siemens experience a plus; CT experience preferred., • Technical Skills:, • May be required to train in and perform remote MRI scanning., • Will be required to perform duties in or near areas containing specialized imaging equipment and must be able to adhere to all department and facility safety protocols. Key Responsibilities: • Perform MRI exams with accuracy and care using high-field magnets across multiple office locations., • Operate and maintain MRI imaging equipment according to established protocols on various equipment brands (GE, Phillips, Siemens), • Ensure patient safety and comfort throughout all procedures, including screening for MRI safety contraindications., • Train in and perform remote MRI scanning as required., • Adhere to all department and facility safety protocols, especially when working in or near areas containing specialized imaging equipment., • Maintain required certifications and stay current with industry standards., • Collaborate with radiologists and other healthcare team members as needed., • Utilize CT experience as a plus when applicable., • May be required to perform duties in or near areas containing specialized imaging equipment Greenlife Healthcare Staffing- Empowering Healthcare Professionals, Enriching Lives.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Key Responsibility Areas: • Lead and mentor a multi-disciplinary organization spanning control systems, instrumentation, diagnostics acquisition, embedded software, and real time integration, including hiring, performance management, career development, and team structure., • Establish engineering operating rhythm: planning, prioritization, technical reviews, staffing plans, and decision-making processes., • Set technical direction and ensure consistent engineering quality across requirements, architecture, implementation, verification, and documentation., • Own the Eos CID architecture, including functional, physical, communications, timing, and data flow boundaries across fast DAQ, supervisory control, PLC automation, safety interlocks, and diagnostics acquisition., • Lead technology selection for real time control, SCADA, networking, timing, and data management, and ensure consistency across integration protocols and data interfaces., • Own the technical interface to external vendors and collaborators providing controls hardware, diagnostics hardware, and instrumentation deliverables, including technical specifications, design reviews, and acceptance participation., • Oversee development and integration of the Eos control system across major subsystems, ensuring deterministic behavior, fault handling, and operational sequencing., • Own Safety and Interlock System philosophy, including safety class logic where required, participation in hazard analyses, and alignment to functional safety practices and standards., • Own instrumentation architecture across the facility: sensor selection, signal types, isolation strategy, signal conditioning, grounding, shielding, and segregation practices for noisy, high power environments., • Oversee diagnostic acquisition architecture end to end, from front end sensors and conditioning through digitizers, FPGA processing, data streaming, and archiving in support of plasma operations and feedback control., • Partner with systems engineering to translate device requirements into CID requirements, interface definitions, and verification plans., • Run evidence based technical gates and design reviews, with clear entry and exit criteria and configuration control., • Own delivery artifacts such as requirements, interface control documents, design packages, test plans, and acceptance evidence to support procurement, installation, and commissioning., • Maintain a strong safety culture including machine protection thinking, hazard analysis inputs, and design choices that support safe installation and operations., • Provide hands on leadership in lab and field environments, coordinating with technicians and test teams for build, wiring, installation support, and debug.Ideal Experience & Skillsets:, • Bachelor’s degree or higher in Electrical Engineering, Controls, Computer Science, Physics, or equivalent., • 10 or more years of relevant experience spanning two or more of the following: integrated control systems, industrial automation, fast data acquisition, instrumentation systems engineering, diagnostics acquisition, real time embedded software., • 5 or more years of engineering management experience leading multi team organizations, including hiring and performance leadership., • Demonstrated experience owning complex system development from architecture through prototype validation and integration., • Strong foundation in safety and high reliability engineering practices, including interlocks, alarms, fail safe design, and disciplined documentation., • Strong cross functional communication skills and experience driving technical decisions across physics, mechanical, electrical, safety, and program teams., • Exceptional work ethic and communication skills., • Experience delivering CID systems for fusion devices, accelerators, advanced nuclear, or other large scientific facilities with tight timing and data fidelity requirements., • Experience with EPICS or TANGO, and industrial integration protocols such as OPC UA, DDS, Modbus, and deterministic timing networks., • Experience with functional safety workflows and standards driven PLC systems engineering., • Experience with FPGA based acquisition and low latency streaming pipelines for real time feedback and machine protection., • Familiarity integrating AI and digital twin capabilities into supervisory control and operations workflows., • Control frameworks and integration: LabView, EPICS, TANGO, OPC UA, DDS, Modbus, TCP IP., • PLC platforms: Siemens TIA Portal, Beckhoff TwinCAT, Allen Bradley, Codesys, IEC 61131 3 practices., • Timing and synchronization: White Rabbit, IEEE 1588 PTP., • Data acquisition and diagnostics: PXIe digitizers, FPGA platforms, event and timestamping frameworks, data streaming infrastructure., • Embedded and middleware software: real time embedded Linux and real time operating systems, C and C++, distributed orchestration tooling., • Instrumentation design and documentation: AutoCAD Electrical, EPLAN, tag databases, input and output lists, cable schedules and loop diagrams.Requirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call., • Ability to work in a facility that contains industrial hazards including heat, cold, noise, fumes, strong magnets, high voltage, high current, pressure systems, and cryogenics.#LI-CB1Company Benefits:, • Salary range $120,000-$240,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTO We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Job Details: Radiology / Cardiology Pay: $57 per hour Assignment Length: 13 Weeks Schedule: Day 5:30am-1:30pm or Night 11pm-7am Start Date: 6/1/2026 Experience: 1 year ATC Healthcare seeking an experienced X-Ray Technologist to perform diagnostic imaging procedures in a variety of clinical settings. This role includes working with diverse patient populations and supporting both routine and emergency imaging needs. Responsibilities include: • Performing high-quality diagnostic X-ray exams in accordance with physician orders, • Operating imaging equipment safely and effectively, • Assisting with bedside/portable imaging throughout the facility, • Supporting imaging needs in:, • Emergency Department, • ICU / PICU / NICU, • Operating Room (including C-Arm procedures), • Preparing patients for procedures and ensuring comfort and safety, • Accurately documenting and uploading images using PACS, • Following all radiation safety and infection control protocols Skills & Experience Required: • Experience with a wide range of imaging procedures, including:, • Chest (AP, routine, decubitus views), • Abdomen (KUB, supine, upright, decubitus), • Spine, pelvis, and extremities, • Skull, facial bones, sinuses, and TMJ, • Strong experience with:, • Portable/bedside imaging, • Trauma imaging and emergency cases, • Operating Room procedures (C-Arm preferred), • Knowledge of contrast studies (including barium procedures), • Familiarity with imaging equipment such as GE Healthcare and Siemens Healthineers, • Strong patient positioning and image quality skills, • Ability to work efficiently in fast-paced environments, • Radiology Tech skills Requirements: • ARRT Certification (American Registry of Radiologic Technologists), • Active New Jersey License, • BLS Certification, • Minimum 1 year of clinical X-ray experience preferred

Job Description Senior Lead Controls & Robotics Engineer We are seeking a hands-on Lead Controls & Robotics Engineer to lead the design and implementation of advanced automation systems integrating industrial controls, robotics, machine vision, motion control, and custom automation equipment. This is an opportunity for a technically strong engineer who enjoys leading complex projects, mentoring other engineers, and remaining hands-on from system concept and design through commissioning and production startup. What You'll Do • Serve as the technical lead on complex automation and system integration projects., • Lead and mentor Controls, Robotics, and Vision Engineers while providing technical direction throughout project execution., • Design and program PLC, HMI, motion control, robotics, and machine vision systems., • Work with controls platforms including Allen-Bradley/Rockwell, Siemens, and Beckhoff., • Develop and integrate robotic applications using FANUC, ABB, KUKA, UR, and Denso., • Design and implement machine vision applications using Cognex, Keyence, and Matrox Imaging., • Develop vision-guided robotic applications for inspection, measurement, verification, barcode/OCR, and 2D/3D vision applications., • Integrate controls, robotics, vision, sensors, motion systems, and industrial networks into complete automation solutions., • Lead FAT, SAT, commissioning, debugging, customer acceptance testing, and production startup., • Provide advanced troubleshooting and optimization of automation systems in manufacturing environments., • Establish engineering standards, reusable code libraries, and documentation practices., • Review and manage structured BOMs, electrical drawings, and project documentation., • Manage technical scope, project priorities, schedules, vendors, and engineering changes., • Ensure systems meet applicable safety and electrical standards, including UL 508A requirements., • Work directly with customers, vendors, manufacturing teams, and internal engineering groups. Qualifications • Bachelor's degree in Electrical Engineering, Mechanical Engineering, Computer Science, Automation Engineering, or related technical discipline., • 5+ years of experience in industrial automation, controls, robotics, machine vision, or systems integration., • Strong hands-on experience with Rockwell/Allen-Bradley PLC programming required., • Experience with Siemens and/or Beckhoff is highly desirable., • Strong background in robotics, machine vision, motion control, sensors, and industrial automation., • Demonstrated ability to lead projects independently from concept through commissioning., • Experience mentoring engineers or providing technical leadership., • Experience working for an automation integrator, OEM, custom machine builder, or project-based manufacturing environment preferred., • Strong troubleshooting, communication, leadership, and customer-facing skills., • Comfortable working in a lean environment and taking ownership of multiple projects., • Ability to travel approximately 25%. Compensation & Benefits • $100,000 – $150,000 +, • Bonus Potential, • Comprehensive Benefits Package, • Flexible Work Environment, • Opportunity to lead technically challenging automation, robotics, and machine vision projects Work Authorization • U.S. Citizen or Permanent Resident (Green Card Holder) To Apply ???? ???? Call/Text Steve Moore – ???? Connect with me on LinkedIn #engineering #controls #robotics #industrialautomation #plc #systemsintegration #hybrid, #midsenior #libertyjobs \nCompany Description Libertyjobs.com has become an essential destination site for experienced job seekers. Our recruiters are continually posting active job openings to the website. Feel free to search our database of open positions and apply for your next career move! Hundreds of new jobs are listed on the site every month in a wide range of industries and locations. Last year we had over 900,000 unique job seekers visit our website, which means over 75,000 skilled job seekers search our openings every month. Established in 2003, Liberty Personnel quickly grew into one of the largest technical recruiting agencies on the East Coast. Today, Liberty Personnel has a national presence and a diverse client base. Listed below are a number of the industries and openings we work on: Information Technology, Software Programmers, Engineering, Manufacturing, Legal, Plant Maintenance, Construction, Oil and Gas, Medical Communications, Accounting, Finance, Electronics, Scientific, Medical Device, Sales, Pharmaceutical, Admin, Automation, Controls, Civil, HVAC, Wastewater, Structural, Electrical, Chemists, Validations, Logistics, Food Production, Renewable Energy and Machinists. Libertyjobs.com has become an essential destination site for experienced job seekers. Our recruiters are continually posting active job openings to the website. Feel free to search our database of open positions and apply for your next career move!\n\nHundreds of new jobs are listed on the site every month in a wide range of industries and locations. Last year we had over 900,000 unique job seekers visit our website, which means over 75,000 skilled job seekers search our openings every month.\n\nEstablished in 2003, Liberty Personnel quickly grew into one of the largest technical recruiting agencies on the East Coast. Today, Liberty Personnel has a national presence and a diverse client base. Listed below are a number of the industries and openings we work on:\n\nInformation Technology, Software Programmers, Engineering, Manufacturing, Legal, Plant Maintenance, Construction, Oil and Gas, Medical Communications, Accounting, Finance, Electronics, Scientific, Medical Device, Sales, Pharmaceutical, Admin, Automation, Controls, Civil, HVAC, Wastewater, Structural, Electrical, Chemists, Validations, Logistics, Food Production, Renewable Energy and Machinists.

Job Description As a 100% Employee-Owned company, Robert E. Mason & Associates, Inc. believes our Associates are the foundation of both our customers' and our success. Our strong company culture, and belief in continued investment in our Associates, has helped us realize long Associate tenures, as well as long lasting relationships with our customers. Under the Robert E. Mason & Associates, Inc. umbrella there are two divisions: R.E. Mason and Apperture Solutions. Apperture Solutions is a technology independent, professional consulting, and implementation services firm. Apperture Solutions offers Data Enablement, Production Optimization, Operations Management, and Other Value-Added Services. Apperture Solutions partners with other providers to offer our customers the technologies and solutions that fit their needs. What Apperture Solutions Offers Associates: Apperture Solutions is a 100% employee-owned company that offers a comprehensive, industry leading benefits package to all eligible Associates: • Participation in the Employee Stock Ownership Program (ESOP), • Retirement plan, including a Safe Harbor contribution, • Medical / Dental / Vision Insurance, • Employer paid Life Insurance and Long-Term Disability Insurance, • Generous paid leave options that include vacation time, sick leave, personal leave time, R.E. Mason Way Half Day, paid Jury Duty, and paid Bereavement Leave, • Paid Parental Leave, • Paid company holidays, • Career Development Program, • Retirement and Financial Wellness program, • Employee Assistance Program (EAP), • Alternative/Hybrid Work Schedules General Description We are looking for a talented and dedicated Senior Automation Engineer to join our Facility Automation Services Team. The ideal candidate will have a strong background in building management systems and other facility automation systems (including access control systems, video surveillance systems, and other complimentary solutions), excellent problem-solving skills, project management experience, and the ability to work effectively as a lead in a team environment. This role involves planning and overseeing the design, configuration, and commissioning of facility automation systems to ensure optimal performance and reliability. The role also provides site engineering support to customers. Typically, this includes maintaining and updating existing configuration, implementing small scale expansion projects and assisting with process optimization projects. Specific Responsibilities • Design, configure, troubleshoot, and maintain various building management and facility automation systems., • Plan architectures for interfaces between various building management systems and with other systems, including SCADA solutions, local Historians and 3rdparty systems., • Develop test plans and strategies for commissioning of facility automation systems either at vendor facilities or at the customer's site during installation, and lead an automation commissioning team., • Advise customers on technology selection, project execution strategy, and technical problems., • Develop project budget and schedules, integrating with engineering partner and client project management teams., • Provide technical support and guidance to other team members and clients as needed., • Lead a team of facility automation engineers, overseeing and reviewing their work as the client's primary point of contact., • Plan and develop system documentation deliverables, including functional requirements specifications and detailed design specifications for a variety of applications., • Support Factory Acceptance Tests (FATs) and Site Acceptance Tests (SATs)., • Support start-up and commissioning activities at customer sites. Qualifications Required Competencies • US Citizenship required, • Experience with Siemens Apogee / Desigo platforms, Schneider EcoStruxure (EBO), Johnson Controls MetaSys, Honeywell Niagara BMS framework, or other relevant BMS platforms., • Advanced knowledge of HVAC controls, utility controls, and environmental monitoring., • A self-starter acting as the working lead of a team in a fast-paced environment., • Ability to communicate effectively with team members and clients, both orally and in writing., • Excellent problem-solving and analytical skills., • Strong attention to detail and commitment to quality., • Willingness to travel as needed to support project requirements in – approximately 25%. Required Education and Experience • Relevant Associates Degree or B.S. in CHE, EE, ME, Comp. Eng, Systems Eng., Comp. Sci., or other related disciplines, • 8-15 years of relevant experience, • MS Office Experience Preferred Experience/Competencies • Experience with building access control systems, video surveillance systems, energy management systems, and lighting control systems, • Windows and network troubleshooting skills., • Knowledge of applicable industry standards such as ISA and IEC., • Experience working in regulated industries, with pharmaceuticals industry experience strongly preferred., • Experience with computer systems validation. Physical Requirements • Standing, • Walking, • Sitting, • Kneeling, • Reaching Overhead, • Climbing, • Pushing and Pulling, • Lifting - 20 pounds, • Using a Computer, • Using a Telephone, • Driving Compensation The base salary range for this role is $80,000 to $200,000 annually. Individual compensation may vary based on experience, qualifications, and other job-related factors. Apperture Solutions is a federal contractor and, as such, is required to solicit the disability status and protected veteran status of candidates. Thus, you are required to answer self-identification questions as part of your application process. These questions are part of Apperture Solution's Affirmative Action Plan and the completion of these questions will not have any effect on any consideration of your application materials. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and need to request an accommodation in order to apply for a position with Apperture Solutions, please call our office at (704) 375-4465. This is a drug-free workplace. Employment is contingent upon the successful completion of any required pre-employment and, if applicable, ongoing drug testing, including testing mandated by customer site access requirements.

The candidate selected for this position will: \n\n • The candidate selected for this position will promote a culture of healing, while accurately interpreting and performing all MRI imaging protocols\n, • The candidate will practice in accordance with state, federal and professional standards\n, • Must demonstrate knowledge of MR imaging equipment; including set-up, utilization, basic troubleshooting and proper care for all equipment\n, • Will abide by strict MR Safety standards and evaluate MR scans for technical quality\n, • EPIC and PACS will be used to manage patient workflow and transmit images for interpretation\n, • Must be competent with IV skills and preparing/administering contrast media\n\n Minimum Education: \n\n • Completion of a 24-month AMA approved School of Radiologic Technology required\n\n License/Certifications: \n\n • ARRT Certified\n, • BLS/CPR certification\n, • IV Certification preferred\n\n Relevant Experience: \n\n • 2 years MRI Experience, Siemens preferred\n About US\n\n \n At Atlantic Health, our promise to our communities is; Anyone who enters one of our facilities will receive the highest quality care delivered at the right time, at the right place, and at the right cost. This commitment is also echoed in the respect, development and opportunities we give to our more than 22,000 team members. Headquarters in Morristown, New Jersey, we are one of the leading non-profit health care systems in the nation. Our facilities and sites of care include: \n \n • Atlantic Health Morristown Medical Center, Morristown, NJ\n, • Atlantic Health Overlook Medical Center, Summit, NJ\n, • Atlantic Health Newton Medical Center, Newton, NJ\n, • Atlantic Health Chilton Medical Center, Pompton Plains, NJ\n, • Atlantic Health Hackettstown Medical Center, Hackettstown, NJ\n, • Atlantic Health Goryeb Children's Hospital, Morristown, NJ\n, • Atlantic Health CentraState Healthcare System, Freehold, NJ\n, • Atlantic Medical Group\n, • Atlantic Visiting Nurse\n, • Atlantic Mobile Health\n, • Atlantic Rehabilitation\n \n We have more than 900 community-based healthcare providers affiliated through Atlantic Medical Group. \n We have received awards and recognition for the services we have provided to our patients, team members and communities. Below are just a few of our accolades: \n \n • Chosen for 17 years by Fortune as one of the magazine’s “100 Best Companies to Work For." \n, • Atlantic Health Morristown and Atlantic Health Overlook Named by Newsweek as two of the “World’s Best Hospitals” in 2026.\n, • Atlantic Health Morristown and Atlantic Health Overlook ranked within the top three hospitals in New Jersey by U.S. News & World Report’s 2025-2026 Best Hospital rankings. \n, • Atlantic Health scored four “A” grades by The Leapfrog Group in its Fall 2025 Hospital Safety Grades, performance measures reflecting errors, accidents, injuries and injections, as well as systems hospitals have in place to prevent harm. \n, • Atlantic Health Morristown and Atlantic Health Overlook are New Jersey's only hospitals to be named among America's 50 Best hospitals by Healthgrades in 2026.\n, • Named by Becker's Healthcare as one of the "165 Top Places to Work in Healthcare – 2026.\n, • Atlantic Health Morristown, Atlantic Health Overlook, Atlantic Health Chilton and Atlantic Health Newton all Forbes Top Hospitals for 2026.\n, • Named by Newsweek as one of America’s Greatest Workplaces for Inclusion & Diversity 2025.\n, • Atlantic Health rated LEVEL 9 - 2025 CHIME Digital Health Most Wired. \n \n Named one of America's 50 Best Hospitals by Healthgrades, a World’s Best Hospital by Newsweek and recognized as a Best Regional Hospital in the NY Metro area by U.S. News & World Report. \n \n \n Our Atlantic Neuroscience Institute is the region’s leader in neuroscience care. A hub for the New Jersey Stroke Network, we offer a broad range of advanced neurological, neurosurgical and neurodiagnostic services. We are also certified as a Level IV Epilepsy Center and home to the Gerald J. Glasser Brain Tumor Center, where more brain tumor surgeries are performed than anywhere else in New Jersey. Our CyberKnife® program is the largest and most experienced in the state. We also have a satellite emergency department in Union, NJ, which treats about 40,000 emergency cases each year. \n \n \n Committed to providing exceptional care, Overlook Medical Center has achieved the prestigious Magnet® recognition. This designation from the American Nurses Credentialing Center is the highest national honor for nursing excellence. What’s more, Overlook Medical Center has advanced certification from The Joint Commission for perinatal care and is designated an Advanced Comprehensive Stroke Center. Additional Joint Commission-certified services include behavioral health care, spine surgery, wound care, and primary care medical home (PCMH). \n \n Atlantic Health offers a competitive and comprehensive Total Rewards package that supports the health, financial security, and well-being of all team members. Offerings vary based on role level (Team Member, Director, Executive). Below is a general summary, with role-specific enhancements highlighted: \n\n \n\n\n Team Member Benefits\n\n\n \n • Medical, Dental, Vision, Prescription Coverage (22.5 hours per week or above for full-time and part-time team members)\n, • Life & AD&D Insurance.\n, • Short-Term and Long-Term Disability (with options to supplement)\n, • 403(b) Retirement Plan: Employer match, additional non-elective contribution\n, • PTO & Paid Sick Leave\n, • Tuition Assistance, Advancement & Academic Advising\n, • Parental, Adoption, Surrogacy Leave\n, • Backup and On-Site Childcare\n, • Well-Being Rewards\n, • Employee Assistance Program (EAP)\n, • Fertility Benefits, Healthy Pregnancy Program\n, • Flexible Spending & Commuter Accounts\n, • Pet, Home & Auto, Identity Theft and Legal Insurance\n \n \n\n\n Note: In Compliance with the NJ Pay Transparency Act (effective Sunday, June 1, 2025), all job postings will include the hourly wage or salary (or a range), as well as this summary of benefits. Final compensation and benefit eligibility may vary by role and employment status and will be confirmed at the time of offer.\n\n \n EEO STATEMENT \n \n \n Atlantic Health, Inc. is an equal employment opportunity employer and federal contractor or subcontractor and therefore abides by applicable laws to protect applicants and employees from discrimination in hiring, promotion, discharge, pay, fringe benefits, job training, classification, referral, and other aspects of employment, on the basis of race, color, religion, sex (including pregnancy, gender identity and sexual orientation), national origin, citizenship status, disability, age, genetics, or veteran status. \n

Job Description MRI Technologist - Maplewood, NJ (#3442) Location: Maplewood, NJ Employment Type: Full-time Hourly Rate: $40/hr - $45/hr About Greenlife Healthcare Staffing: Greenlife Healthcare Staffing is a leading nationwide recruitment agency dedicated to connecting healthcare professionals with top-tier opportunities. We partner with hospitals, clinics, nursing homes, multi-specialty groups, and private practices to match talented individuals with roles that align with their skills and career goals. Position Overview: Greenlife Healthcare Staffing is seeking a full-time MRI Technologist to join an Imaging Office at a Radiology Group in Maplewood, NJ. This role requires an experienced professional with significant MR work experience, particularly with high-field magnets. The position offers a highly competitive hourly rate and the opportunity to train in and perform remote MRI scanning. Why Join Us? • Competitive Compensation: $40/hr - $45/hr, • Comprehensive Benefits:, • Medical, dental, and life insurance, • 401k / pension, • Profit-sharing plans, • Generous paid time off policy and more, • Work Schedule: Full-time position., • Professional Growth: Gain valuable experience in a collaborative, innovative, and supportive environment., • Impactful Work: Contribute to a mission-driven organization dedicated to improving patient outcomes. Qualifications: • Education: Graduate of an accredited Radiologic Technology or MRI program, • Licensure: ARRT(MR) certification required, • Experience: 1 year of MR work experience required; high-field magnet experience is a must; GE high-field magnet experience preferred; Phillips and Siemens experience a plus; CT experience preferred, • Technical Skills:, • May be required to train in and perform remote MRI scanning., • Will be required to perform duties in or near areas containing specialized imaging equipment and must be able to adhere to all department and facility safety protocols. Key Responsibilities: • Perform MRI exams with accuracy and care using high-field magnets across multiple office locations, • Operate and maintain MRI imaging equipment according to established protocols on various equipment brands (GE, Phillips, Siemens), • Ensure patient safety and comfort throughout all procedures, including screening for MRI safety contraindications, • Train in and perform remote MRI scanning as required, • Adhere to all department and facility safety protocols, especially when working in or near areas containing specialized imaging equipment, • Maintain required certifications and stay current with industry standards, • Collaborate with radiologists and other healthcare team members as needed, • Utilize CT experience as a plus when applicable, • May be required to perform duties in or near areas containing specialized imaging equipment How to Apply: If you are ready to take the next step in your career and make a difference in the healthcare industry, we want to hear from you! Submit your Resume/CV to hr@glhstaffing.com or call our office at (800) 608-4025 to learn more about this opportunity and others we offer. Greenlife Healthcare Staffing- Empowering Healthcare Professionals, Enriching Lives

Job Description LAPP is a family-owned company headquartered in Stuttgart and a global leader in cable and connection technology. Founded in 1959, we are still fully family-owned today. With around 5,800 employees, we are operating in over 80 countries – globally connected and regionally rooted. Working at LAPP means more: this is where inventive spirit and a hands-on mentality meet cherished values and tradition. We offer all employees the freedom to develop and pursue new opportunities. Flexibility and personal responsibility are just as important to us as a family-friendly work environment. We value all our colleagues with their talents, ideas and perspectives. SUMMARY:The Manufacturing Electrical Technician is responsible for installing, maintaining, troubleshooting, and repairing electrical systems and equipment in a manufacturing environment , as well as the Florham Park site facility.This role ensures that all electrical components of production machinery and facility systems operate safely and efficiently, minimizing downtime and maximizing productivity. ESSENTIAL DUTIES AND RESPONSIBILITIES – include the following. Other duties may be assigned. • Troubleshoot and repair electrical issues on manufacturing equipment, including motors, drives, PLCs, sensors, and control systems, • Perform preventive maintenance on electrical systems according to scheduled maintenance programs, • Respond to equipment breakdowns and emergency repairs to minimize production downtime, • Replace defective components such as relays, switches, motors, and circuit breakers, • Install new electrical equipment and machinery according to specifications and electrical codes, • Assist with equipment relocations and facility layout modifications, • Upgrade existing electrical systems to improve efficiency and safety, • Run conduit and wire new circuits as needed, 120V/220V/480V Circuits, • Read and interpret electrical schematics, blueprints, technical manuals, and wiring diagrams., • Document all maintenance activities, repairs, and equipment modifications., • Collaborate with the maintenance team, engineers, and production staff to resolve technical issues, • Provide input on equipment reliability and suggest improvements, • Follow all safety protocols, lockout/tagout procedures, and company policies, • Ensure all electrical work complies with the National Electrical Code (NEC) and local regulations, • Maintain a clean and organized work area, • Participate in safety training and continuous improvement initiatives, • May have to work at 20/30 ft height with the help of a scissor lift., • Familiar with 11KV to 480V Transformer, 480V Distribution System SUPERVISORY RESPONSIBILITIES:This job has no supervisory responsibilities. COMPETENCIES • Basic skills and working knowledge in the field of electro-mechanics., • Demonstrate excellent interpersonal & communication skills, strong work ethic, and a positive attitude., • Upholds all safety policies and procedures and OSHA guidelines., • Prioritizes and plans work activities while using time efficiently., • Looks for ways to improve and promote quality; Monitors own work to ensure quality., • Treats others with respect and upholds organizational values., • Accepts responsibility for own actions., • Meets productivity standards and strives to increase productivity results., • Ability to read mechanical/Electrical prints., • Use of Power tools, Multimeter/Amps meter, • Basic Machining skill like drilling/tapping, QUALIFICATIONS AND EDUCATION REQUIREMENTS • High school diploma or equivalent; associate degree in electrical technology or related field preferred, • 3-5 years of experience in industrial electrical maintenance, • Strong knowledge of electrical systems, including 480v three-phase power, motor controls, and plcs, • Ability to read and interpret electrical schematics and technical drawings, • Proficiency with electrical testing equipment (multimeters, megohmmeters, clamp meters, etc.), • Understanding of nec and osha safety requirements, • Journeyman electrician license, • Experience with programmable logic controllers (allen bradley, siemens, etc.), • Knowledge of variable frequency drives (vfds) and servo systems, • Familiarity with industrial networks and automation systems, • Welding or mechanical skills CERTIFICATIONS, LICENSES, REGISTRATIONS:n/a TRAVEL REQUIREMENTS:n/a LANGUAGE SKILLS:Ability to read and interpret electrical and mechanical drawings. Ability to speak effectively before groups of customers or employees of organization. Proficiency in the English language, written and spoken is required. MATHEMATICAL SKILLS:Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. REASONING ABILITY:Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. COMPUTER SKILLS:To perform this job successfully, an individual should have knowledge of Lotus Notes and Microsoft Office. WORK ENVIRONMENT:The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts. The employee is occasionally exposed to risk of electrical shock. The noise level in the work environment is usually moderate. The employee must be able to tolerate conditions associated with no air conditioning or heat. PHYSICAL DEMANDS:The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to use hands to finger, handle, or feel and talk or hear. The employee is frequently required to stand; walk; sit and reach with hands and arms. The employee is occasionally required to stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 10 pounds, and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. COMPENSATION: After thorough market analysis, LAPP takes many factors into consideration when determining base salary such as experience, knowledge, skills, abilities, etc. of the candidate. The base salary range for this role is $90,000 - $95,000 plus participation in LAPP's bonus plan. We also offer a comprehensive benefits package including Medical, Vision, Dental, Paid Time Off, Paid Holidays, 401(k), HSA/FSA, Life Insurance, and more! LAPP is an Equal Opportunity Employer You should be proficient in: • 120/208/240/480 Voltage Systems Machines & technologies you'll use: • Variable Frequency Drives (VFD), • Programmable Logic Controller (PLC) (Allen Bradley, Siemens), • Servo Motors

Job Description Automation PLC/SCADA Engineer Contract – NJ Shift: 2nd or 3rd shift (evenings or nights) Overview Seeking a hands-on Automation/Controls Engineer to support pharmaceutical manufacturing operations. The ideal candidate has a strong PLC/SCADA background within a GMP pharmaceutical environment and is comfortable troubleshooting automated manufacturing equipment on the production floor. This is a mid-level opportunity for someone with a solid engineering foundation who is still technically hands-on and interested in continuing to learn. Background • 4–10 years of pharmaceutical/biopharmaceutical automation experience, • Hands-on experience supporting manufacturing automation and controls systems, • Strong experience with PLC and SCADA systems, particularly Allen-Bradley and/or Siemens, • Experience troubleshooting across PLC, HMI/SCADA, instrumentation, electrical, software, and industrial networking, • Experience in GMP/cGMP manufacturing environments, • Background supporting equipment integration, commissioning, FAT/SAT, qualification, or capital projects, • Strong root-cause analysis and problem-solving capabilities, • Experience with sterile manufacturing or filling lines is highly preferred Requirements • 4–10 years of relevant pharmaceutical automation/controls experience, • Strong PLC programming/troubleshooting experience, • Strong SCADA/HMI experience (Ignition, iFix, WinCC, etc.), • Ability to troubleshoot and resolve automation issues on manufacturing equipment, • Working knowledge of GMP, automation validation, change control, investigations, and data integrity, • Experience with industrial networking and automation communication protocols is preferred, • Must be technically hands-on

Job Description1. Equipment Operation & Maintenance • Perform routine inspection, preventive maintenance, calibration, and troubleshooting of automated sortation systems, conveyor systems, barcode scanners, DWS systems, and other material handling equipment., • Monitor equipment performance and operating parameters to ensure system availability and operational efficiency (target uptime of 98% or higher)., • Maintain accurate maintenance records and equipment documentation.2. Troubleshooting & Technical Support, • Respond quickly to equipment failures, system alarms, downtime, and operational issues., • Diagnose electrical, mechanical, PLC, and control system failures and implement corrective actions to minimize production interruptions., • Establish rapid response procedures to reduce equipment downtime and improve maintenance efficiency.3. Preventive Maintenance & Reliability Improvement, • Develop and execute preventive maintenance programs for automation equipment., • Manage spare parts inventory and track component life cycles., • Monitor key maintenance KPIs, including MTBF (Mean Time Between Failures), and continuously improve equipment reliability while reducing maintenance costs.4. Equipment Installation & Continuous Improvement, • Participate in the installation, commissioning, testing, and acceptance of new automation equipment., • Work closely with equipment vendors and engineering teams on system upgrades and process improvements., • Analyze equipment performance data and recommend energy-saving initiatives and operational optimization projects.5. Documentation & Training, • Develop standard operating procedures (SOPs), maintenance documentation, and emergency response procedures., • Provide technical training and guidance to operations and maintenance personnel on the proper operation and maintenance of automation equipment., • Promote standardized maintenance practices and continuous improvement initiatives. Requirements • Associate's degree or above in Electrical Engineering, Mechanical Engineering, Automation Engineering, Industrial Engineering, Logistics Engineering, or a related technical field., • Experience maintaining automated material handling systems, conveyor systems, or warehouse automation equipment., • Familiarity with cross-belt sorters, DWS systems, AGVs, barcode scanners, and other logistics automation equipment., • Strong knowledge of electrical systems, motor controls, sensors, drives, and industrial automation., • Experience with PLC programming and troubleshooting (Siemens, Mitsubishi, Allen-Bradley, or similar platforms)., • Ability to read and interpret electrical schematics and engineering drawings., • Proficiency with AutoCAD, EPLAN, or similar engineering software., • Basic understanding of industrial networking and TCP/IP communication is preferred., • Must be bilingual in Mandarin and EnglishExperience & Certifications, • Minimum 3 years of experience maintaining automated logistics equipment, warehouse automation systems, or industrial automation equipment preferred., • California Electrician Certification or equivalent electrical certification is preferred. Candidates without certification should be willing to obtain the required certification within a reasonable period after hire., • OSHA 10/30 certification is a plus. Benefits • Base Salary: 60k-100k + bonus （Negotiable base on experience）, • 7 PTO days, • 5 Paid Sick Leave Days, • 6 Paid Holidays, • 401K, • Medical insurance, Dental and Vision Insurance, STD/LTD

The Head of GTM Operations, Americas is the operational backbone of the Mendix & RapidMiner Specialized Sales organization in the Americas. Siemens is a Top 10 Global Software Company and a leader on Fast Company’s Most Innovative Companies in the World! With the acquisition of Mendix in 2018, Sie

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview: The Lead Mechanical CAD & PLM Engineer owns the configuration and integrity of Thea Energy's products by directly managing the top-level assembly in Siemens NX and creating, maintaining, and enforcing the modeling standards, drafting standards, review workflows, and release process for the company. The role pairs end-to-end ownership of one or more top-level assemblies with process and procedure governance over CAD and PDM standards and processes. These responsibilities will be executed using Siemens NX and Siemens Teamcenter to achieve project goals through a lean, high-performance process adhering to ISO 9001 standards. The Lead Mechanical CAD & PLM Engineer is the single point of accountability for how Thea structures, controls, and evolves its top-level CAD configurations, and for ensuring that the PDM environment remains stable, current, and well-governed as the team scales. The role combines deep CAD authority with system-administrator responsibility, and partners closely with subassembly leads, systems engineering, and engineering leadership. Key Responsibility Areas: 1. Top-Level Assembly Configuration Ownership Assembly Ownership: Serve as the named owner of a designated top-level assembly (TLA), responsible for its structure, release state, and configuration integrity from concept through production. Subassembly Coordination: Partner with subassembly leads to maintain alignment between subordinate models and the TLA, including merge cadence, naming conventions, structural standards, interfaces, space claim, and modeling best practices. Conflict Resolution: Drive resolution of configuration conflicts between subassemblies and ensure design intent preservation across the assembly hierarchy. 1. Cross-Functional Interface Coordination Interface Tracking: Partner with the Systems Engineer to track and document mechanical-to-electrical, mechanical-to-fluid, and mechanical-to-software interfaces relevant to the assigned TLA. Interface Register: Maintain a PDM-based interface register based on an authoritative source that reflects the current physical and logical boundaries between subsystems. Drift Detection: Flag interface drift early including geometry, tolerance, and connector changes and lead the change-control conversation when shifts occur. 1. Teamcenter PDM Operations System Administration: Serve as the system administrator for Teamcenter, accountable for environment uptime, system upgrades, and patch cycles. Licensing: Support negotiations for Teamcenter licensing with Siemens and adjacent partners by providing information on usage and managing seat allocation, and steward annual or multi-year renewals. Feature Lifecycle: Scope, test, evaluate, and roll out new Teamcenter features and modules in response to evolving company needs, in coordination with IT and engineering leadership. PDM Proliferation: Lead integration of Teamcenter into the larger company software stack. For example, PDM interaction with Manufacturing and Test software platforms. 1. Access Control & Workflow Governance Access Control: Own user access and permissions for Teamcenter and Siemens NX, including provisioning, role definitions, and periodic access reviews. Workflow Templates: Define and maintain Teamcenter workflow templates (release, change, review) so that the process is consistent across teams and meets the needs of the team for speed versus complexity. Workflow Auditing: Audit workflow activity, identify bottlenecks, and iterate workflow design with feedback from all company stakeholders. 1. Training & Documentation CAD and Configuration Training: Develop and deliver training on CAD and configuration management practices, including modeling best practices, top-level assembly structure, subassembly coordination, and naming and merge conventions. Teamcenter Usage Training: Build and maintain onboarding and ongoing-use training for Teamcenter, covering navigation, item creation, revision control, and day-to-day data management. Release Workflow Training: Author training and reference materials that walk users through release workflows, including ECO/ECR initiation, review responsibilities, approval routing, and post-release obligations. Best-Practice Documentation: Maintain a living set of best-practice guides and quick-reference documents for the engineering organization, updated as Teamcenter features and CAD practices evolve. 1. Additional Support VFX and Marketing Graphics: Interface with and provide support to VFX and marketing groups for graphics generation, as necessary. Ideal Experience & Skillsets: Bachelor's degree in Mechanical Engineering or a related discipline. Five to seven years of professional experience in mechanical design and CAD, including ownership of complex assemblies in Siemens NX or an equivalent commercial CAD package. Hands-on experience administering Teamcenter or another commercial PLM platform (e.g., Windchill, Enovia). Demonstrated ability to coordinate across engineering disciplines on shared deliverables, including interface management with systems engineering. Working familiarity with engineering change management (ECO/ECR) and release control. Strong written and verbal communication skills, particularly in documenting configuration management and PDM administration practices, and in producing training materials for technical audiences. Preferred Qualifications Direct experience as the named owner of a top-level assembly on a hardware product through release. Prior responsibility for PDM license negotiation or vendor management. Familiarity with Model-Based Definition (MBD), Design-in-Context methodologies, and Product Manufacturing Information (PMI) workflows. Experience designing or auditing Teamcenter workflow templates. Experience developing and delivering technical training for engineering teams (CAD, PDM, or workflow-related). Experience in fusion energy, aerospace, defense, medical devices, or another regulated hardware environment. Familiarity with NX Open or Teamcenter customization (BMIDE, ITK, or comparable). Company Benefits: • Salary range $130,000-$160,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTO It’s not necessary to meet all of the skillsets outlined above. Please feel free to send us a note and tell us why you would still be a great fit for this role or Thea Energy. Diversity and Inclusion: Thea Energy is an equal opportunity employer committed to creating a company of diverse backgrounds. By creating a diverse environment, we will bring new ideas and approaches to solving some of the world’s hardest (and most important) problems. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, family or marital status, age, disability, veteran’s status, or other characteristic protected by applicable laws and regulations. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you w

HospitalHire is seeking a travel Nuclear Medicine Technologist for a travel job in Newark, New Jersey. Equipment: Siemens Nuclear and Spect CT.

Job DescriptionDescription: POSITION SUMMARY The Facilities Maintenance Specialist is responsible for the reliable operation, maintenance, troubleshooting, and improvement of facility infrastructure and building systems supporting a GMP pharmaceutical/biotechnology manufacturing and laboratory environment. A primary responsibility of this position is the operation, troubleshooting, and maintenance of the Siemens Building Management System (BMS), including Siemens Desigo controls. The individual will use the BMS to monitor and troubleshoot HVAC and facility systems, analyze alarms and trends, evaluate equipment performance, and support environmental conditions throughout the facility. CORE REQUIREMENT – SIEMENS BMS / CONTROLS The successful candidate must have demonstrated hands-on experience with Siemens Desigo or a comparable Siemens Building Management System and be capable of using the BMS to troubleshoot HVAC equipment, alarms, sensors, valves, dampers, control sequences, trends, and environmental conditions. Requirements: KEY RESPONSIBILITIES • Serve as a key Facilities resource for the Siemens Desigo Building Management System (BMS)., • Monitor and troubleshoot HVAC and facility equipment through the Siemens BMS., • Diagnose BMS alarms, equipment faults, communication issues, sensor problems, and abnormal operating conditions., • Review AHU, RTU, chiller, boiler, humidifier, exhaust, and other HVAC system graphics and operating parameters., • Analyze BMS trends for temperature, humidity, pressure, airflow, supply/return temperatures, valve position, damper position, and other critical parameters., • Troubleshoot control loops and determine whether issues originate from controls, sensors, actuators, valves, dampers, mechanical equipment, or field devices., • Understand HVAC control sequences, including heating/cooling valve operation, humidity control, temperature control, and differential pressure., • Adjust authorized BMS setpoints, schedules, alarm limits, and operating parameters in accordance with approved procedures., • Identify recurring alarms and equipment performance issues and recommend corrective actions., • Work with Siemens and other controls vendors to troubleshoot system issues and implement corrective actions., • Support BMS upgrades, programming modifications, graphics changes, controls installations, and system commissioning., • Verify proper operation of controls following maintenance, repairs, or system modifications., • Maintain accurate documentation of BMS changes, alarms, troubleshooting activities, and corrective actions. FACILITIES MAINTENANCE • Perform preventive, predictive, and corrective maintenance on facility equipment and systems., • Troubleshoot and maintain AHUs, HVAC systems, chillers, boilers, pumps, compressors, vacuum systems, humidification systems, exhaust systems, plumbing systems, electrical systems, and building automation/control systems., • Troubleshoot low-voltage electrical and control circuits., • Perform inspections and monitor facility equipment for abnormal conditions., • Respond to equipment failures and facility emergencies., • Complete maintenance work orders and accurately document work performed., • Support contractors and outside service providers during repairs, inspections, and projects., • Assist with facility construction, equipment installation, relocation, and retrofit projects. GMP / LABORATORY ENVIRONMENT • Perform maintenance activities in GMP pharmaceutical, biotechnology, and laboratory environments., • Understand the impact of HVAC and facility systems on controlled environments., • Support temperature, humidity, pressure differential, and environmental monitoring requirements., • Follow applicable GMP, safety, environmental, and facility procedures., • Support investigations involving HVAC, facility equipment, environmental excursions, alarms, and system failures., • Work closely with Quality, Engineering, Operations, EH&S, and external contractors when required. PREVENTIVE / PREDICTIVE MAINTENANCE & RELIABILITY • Complete scheduled PM and demand work orders in a timely manner., • Identify recurring equipment problems and recommend reliability improvements., • Participate in root-cause troubleshooting and corrective actions., • Identify opportunities to improve equipment reliability and reduce downtime., • Maintain accurate equipment and maintenance records. VENDOR / CONTRACTOR MANAGEMENT • Provide oversight and technical direction to outside contractors and service providers., • Coordinate Siemens controls service and troubleshooting activities., • Review contractor work and verify that repairs meet facility requirements., • Assist with obtaining quotes, scheduling service, and coordinating facility projects. REQUIRED QUALIFICATIONS • High school diploma or equivalent; technical degree, trade certification, or associate degree preferred., • Minimum 5–7 years of facilities maintenance, building automation, HVAC, or facilities operations experience., • Strong hands-on experience with Siemens Desigo or comparable Siemens Building Management Systems., • Demonstrated experience troubleshooting HVAC equipment through a BMS/controls system., • Strong understanding of AHUs, HVAC systems, valves, dampers, pumps, sensors, actuators, and control sequences., • Experience working in a GMP pharmaceutical, biotechnology, laboratory, or similarly regulated environment preferred., • Strong mechanical and electrical troubleshooting skills., • Ability to read mechanical, electrical, HVAC, and controls drawings., • Experience with preventive and predictive maintenance programs., • Ability to work independently with minimal supervision., • Strong computer skills, including Microsoft Word, Excel, Outlook, and CMMS software., • Strong written and verbal communication skills. PREFERRED QUALIFICATIONS • Siemens Desigo certification or formal Siemens controls training., • Experience with Siemens Desigo CC, Insight, or related Siemens BMS platforms., • Experience troubleshooting DDC controls., • Experience with HVAC control sequences and PID/control loops., • Experience with BMS graphics, trending, alarm management, and system scheduling., • HVAC, electrical, controls, or stationary engineer trade certification., • NJ Black Seal Boiler Operator License., • Experience with cleanrooms and controlled environments., • Experience with chilled water, hot water, steam, compressed air, vacuum, and other facility utilities. PHYSICAL / SCHEDULE REQUIREMENTS • Frequent walking, standing, climbing, bending, kneeling, and working in mechanical spaces., • Ability to work from ladders and elevated locations and lift up to 50 lbs., • Participation in an on-call rotation., • Weekend and holiday coverage as required., • Overtime may be required based on facility needs., • Must successfully complete applicable background and drug/alcohol screening. SUCCESS IN THIS ROLE The successful candidate will be able to independently use the Siemens BMS as a troubleshooting tool—not simply monitor alarms. The individual should be able to connect BMS data to the physical equipment, identify the likely source of an HVAC or environmental problem, determine whether the issue is controls-related or mechanical, and coordinate the appropriate corrective action while mainta

Siemens is an Equal Opportunity Employer encouraging inclusion in the workplace. Our mission at Controlling and Finance Assurance (CF A) is to provide objective, factual and independent foresight to help Siemens be excellent and to improve the overall success of the company. As a business partner to

Aerotek - - Responsibilities: Weigh packages and label them appropriately; Operate sit-down forklift; Inspect packages and shipping containers; Assemble daily orders by shipping location; Maintain records of packages and shipments.

Siemens offers a variety of health and wellness benefits to our employees. Equal Employment Opportunity Statement Siemens is an Equal Opportunity Employer encouraging inclusion in the workplace.

Airport Terminal Services - - Responsibilities: lift up to 70lbs per mail handling unit; sort, scan, load/unload USPS mail containers and Airline cans; follow all Safety rules and Regulations; work assigned schedules including weekends and holidays.

Siemens Project Management Office (PMO) is looking for a Customer Services (CS) Project Manager to join our Data Centers team. Protecting the environment, conserving our natural resources, fostering the health and performance of our people as well as safeguarding their working conditions are core to

Distribution/Materials Handler.The primary purpose of the Distribution/Materials Handler position is to receive and verify all incoming mail, packages, supplies, and other items and ensure prompt and accurate delivery of said items from the mailroom and receiving areas to the appropriate departments

Material Handler, GWA- 2nd Shift.Location: USA - Carteret, Salt Meadow Rd Division: Solutions.Job area: Terminal/Warehouse/Transport.Position Summary: The General Warehouse Associate is responsible for picking, scanning, labeling, moving, staging, replenishing, and stacking product.This individual i

Service Center Warehouse Material Handler.As a Service Center Warehouse Material Handler, you will ensure products get where they need to be.You will receive, store, select, pack, and ship warehouse inventory.Our Zone utilizes a Warehouse Management System so technology is required to perform this j

Tax Counsel – Siemens Transform the everyday with us! The Tax Counsel has the opportunity to lead key strategic initiatives focused on value creation through the analysis and execution of beneficial tax strategies. About Siemens We are a global technology company focused on industry, infrastructur

Material Handler/Delivery Driver.We're Dealer Tire, a family-owned, international distributor of tires and parts established in 1918 in Cleveland, OH.We're laser focused on helping the world's largest and most trusted auto manufacturers grow their tire businessin fact, we've sold more than 60 millio

Now Hiring: Forklift Operator/Material Handler – Pharmaceutical Packaging.Please read the entire post; application instructions are located at the very bottom.Join the Team at PROSTAR Staffing!.We are excited to partner with a well-established pharmaceutical packaging warehouse in Whippany, NJ, cu

As a Warehouse Material Handler, you will be responsible for assisting with warehouse operations and ensuring smooth logistics, including: organize inventory and ensure items are stored properly.Finance to provide billing and documentation in a timely manner.Duties and responsibilities can change de