Structural engineering jobs in Hicksville, New YorkCreate job alerts

Job Description The Building People, LLC, has a position open for a full-time HVAC/R Technician for the facilities engineering program to support a federal Agency. The HVAC Technician will have a strong focus on operating, maintaining, troubleshooting and repairing facility equipment on all systems. Individuals are expected to demonstrate technical expertise in HVAC trade and be multi-skilled in others (Electrical, Piping/Plumbing, Central Utility Plant Operations) in order to successfully complete daily/weekly work assignments. Responsibilities will include, but not be limited to: • Perform maintenance, monitoring repairs to the Mechanical, Plumbing, Structural, Furniture, Fire, Life Safety, and Control systems for the facility to keep facility and building systems up to applicable standards as assigned, • Maintains responsibility for facility services, corrective maintenance, inventory control, general maintenance and technical proficiency., • Maintenance of the equipment will include cleaning, inspecting, calibrating and changing parts to maintain the HVAC systems and associated equipment at optimum performance levels, • Maintain heating equipment, chillers (air and/ or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc., • Knowledge of the tools, materials, and test equipment used in the installation,, • Maintenance and repair of air conditioning/refrigeration HVAC control systems., • Install, maintain, and repair HVAC controls, including DDC, pneumatic, electric, and electronic controls., • Troubleshoots and repairs HVAC/BAS control problems, including dampers, coils, HVAC steam related controls, air handling equipment, and all types of valves., • Adjusts and calibrates pneumatic/electronic devices to balance all HVAC systems., • Inspects and services controls on a scheduled basis., • Responds to service calls and troubleshoots problems., • Prepares estimates for the repair and/or installation of new Mechanical, Electrical and Plumping systems and makes recommendations for such repairs and services., • Troubleshoots and tests controls using test gauges, amp meters, hydro thermographs, and computers., • Repair equipment and perform corrective maintenance in assigned programmatic area(s)., • Inspect and test equipment / systems to ensure that technical integrity is maintained and if necessary, proposes appropriate corrective action., • Review pertinent technical manuals to remain current with technology and electrical safety codes., • Work indoors & outdoors in the installation and maintenance of a wide - array of technical equipment; use of ladders, safety equipment and ability to navigate rooftops and tight spaces may be required, • Applies technical knowledge to perform simple or routine tasks following detailed instructions., • Receives technical guidance, as required, from supervisor or higher-level technician., • Five (5) years of commercial HVAC/R journeyman level experience., • Communication skills required to interface and coordinate with other technicians., • Must hold EPA Universal level certification per Section 608 of the Clean Air Act., • Must hold NATE, HVAC Excellence Professional/Industry, or UA Star Mastery certification., • Experience setting up and managing BAS schedules, set points, and alarms., • Experience with general RCM practices and procedures., • Capable of performing physical labor including, walking, standing, lift up to 40lbs, pulling, climbing up and down ladders and agility/dexterity to perform duties assigned., • Must be able to successfully pass a government background investigation Preferred Experience & Skills • Familiarity with Niagara, • Skills in Maximo or CMMS Required Education • High School Diploma of GED Equivalent

GPI is seeking an accomplished Senior Bridge Design Engineer with 20 or more years of experience to join our Structures group in Melville, New York. This is a senior-level leadership role for a seasoned professional who is passionate about delivering high-quality bridge and structural solutions while mentoring the next generation of engineers. About the Role As a Senior Bridge Design Engineer at GPI, you will serve as a technical leader on complex bridge and structural projects, working closely with multidisciplinary teams and public-sector clients. You will play a key role in project delivery, technical oversight, and staff development while contributing to the continued growth of GPI’s bridge practice in the New York region. Do you value a company that puts employee satisfaction at the forefront of who they are? If so, GPI wants you! GPI is a multi-discipline engineering firm providing planning, design, and construction services for transportation infrastructure and building system projects throughout the United States for over 50 years. Ranked in the Top 100 Firms by Engineering News Record, GPI is a forward-thinking, innovative firm with a culture committed to excellence and fosters staff empowerment. For more information, visit: Responsibilities • Lead and oversee the planning, analysis, and design of bridge and structural projects, • Serve as Engineer of Record on major bridge projects, • Provide technical guidance, mentorship, and quality control for junior and mid-level engineers, • Coordinate with clients, agencies, and project stakeholders, including NYSDOT, NYCDOT, and local municipalities, • Review plans, specifications, and cost estimates to ensure technical excellence and regulatory compliance, • Support business development efforts, including proposal development and client presentations, • Ensure projects are delivered on schedule, within budget, and to GPI’s high standards of quality Qualifications • Bachelor’s degree in Civil or Structural Engineering (Master’s degree preferred), • Professional Engineer (PE) license required; New York PE required, • 20+ years of bridge design experience, including significant work on complex transportation structures, • Extensive knowledge of AASHTO, NYSDOT, NYCDOT, and applicable design codes and standards, • Proven experience leading design teams and managing large-scale projects, • Strong communication, leadership, and client-facing skills, • Experience with industry-standard structural analysis and design software

a well-established union demolition contractor serving the New York metro area, is seeking a Junior Estimator to join their team in Farmingdale, NY. This role offers the opportunity to work alongside experienced demolition professionals while developing hands-on estimating skills across a wide variety of public and private construction projects. What You'll Do as the Junior Estimator: • Review architectural, structural, and mechanical drawings to understand project scope, • Perform quantity takeoffs for demolition work including interior, structural, and mechanical removal, • Assist in calculating labor, equipment, disposal, and subcontractor costs, • Help prepare competitive bid packages for public and private construction projects, • Identify scope gaps and inconsistencies within drawings and specifications, • Communicate with general contractors to clarify project details and demolition requirements, • Maintain organized documentation for estimates and bid submissions, • Support senior estimators and project managers during the bid process, • Background in construction or a related field, • Ability to read and interpret construction drawings and specifications, • Strong attention to detail and organizational skills, • Clear communication skills and ability to collaborate with project teams, • Prior estimating or quantity takeoff experience, • Exposure to demolition or heavy construction projects, • Education in construction management, engineering, or a related discipline, • Experience using digital takeoff or estimating tools such as On-Screen Takeoff, Bluebeam, or similar platforms, • Base salary of $60,000 - $75,000 depending on experience, • 401(k) with company match, • Medical benefits, • Paid time off, • Hands-on mentorship from experienced demolition estimators

Job ID: 554164689 Location: 1111 Stewart Avenue, Bethpage, NY 11714 Lightpath is one of the largest competitive local exchange carriers in the tri-state area. Weown and operate our infrastructure "from the ground up" by deploying over 20,000 route miles connecting 13,500 on-net/LIT buildings. With a strong portfolio of cutting-edge solutions for Internet, WAN, Voice, SD-WAN, Security & Cloud services, we enable Enterprise customers of all sizes the ability to react to new challenges while developing best practices for the future. With Lightpath's continued focus on network excellence and a "customer first" service commitment, we are building a workforce of the best talent that will meet the needs of our customers and reflect the diverse communities we serve. Job Summary Lightpath is seeking a Network Facilities Engineerto manage and oversee the critical facility infrastructure to include but not limited to structural, electrical, mechanical and plumbing of our owned and external vendor colocation facilities. Responsibilities include the tracking all assets, scheduling of preventative maintenance, infrastructure upgrades, monitoring of each facility from an infrastructure maintenance, infrastructure upgrade, emergency response,housekeeping, customer support prospective. We're looking for a skilled, enthusiastic colocation operations engineer to help organize and operate several colocation facilities from an infrastructure maintenance and upgrade prospective. This position is responsible for the support of planning, designing, and engineering of power and space allocations within the Lightpath facilities and Datacenters. Individuals in this position are responsible for supporting 100% uptime for the Datacenter and its customers. The power and space solution will also include the budgetary approval process as well as project management of the solution to completion. The Network Facilities Engineer will validate all solutions are complete and meet the quality standards. Also, all necessary databases and systems updates are required. It is expected that he/she will be self-motivated, have a good attention to detail and able to self-manage capital projects with an outstanding professional attitude. Will track all aspects of operations and performance of Critical infrastructure and will submit reports that will result in upgrades-based performance and/or capacity. This position will create and submit MOPs (Method of Procedure) and coordinate all work. These facilities consist of leased space within buildings that have power and cooling for Lightpath and customer electronic equipment as well as leased space within a collocation facility that is either a cage or cabinet where electronic equipment is place and or fiber cross connects inner connect to other spaces within the facility or building. These spaces are also ILA huts along a fiber route from New Jersey to Ashburn VA where Lightpath and Lightpath customers house electronic equipment for their leased fiber network from Lightpath. Responsibilities • Oversee all aspects of critical infrastructure maintenance to include but not limited to HVAC, generators, power plants and site BMS within a facility, including requests, plans to modify infrastructure., • Managing vendor maintenance contracts with to perform quarterly, semiannual and annual maintenance on the structural, electrical, mechanical and plumbing critical infrastructure., • Plan and maintain preventative schedules., • Planning, designing, and allocation of power and space allocations within the Lightpath facilities and Datacenters., • Individuals in this position are responsible for supporting 100% uptime for the Datacenter and its customers. The Planning support will include collecting space and power data on a periodic basis and design for network growth/expansion., • The power and space solution will also include project management, project budget tracking, and the oversight of the solution to completion. The engineer will validate all solutions are complete and meet the quality standards., • All necessary databases and systems data updates are required., • Support of emergency response procedures in case of power outages/failure., • Ensure compliance with Telcordia, OSHA, and company standards for Facilities Capital Projects. Monitor capital projects from planning through completion, ensuring quality assurance and compliance., • Maintain compliance and safety, environmental and regulatory standards that would apply., • Manage facility infrastructure upgrades, projects within a facility from a construction vendor prospective., • Oversee all aspects of external colocation spaces from a quarterly review with colocation vendors to understand uptime performance, maintenance records for critical infrastructure, LP fiber capacity., • Provide data/information for all collocation network growth and augmentation activities within an LP facility as well as external vendor facilities., • Drive process and procedure improvements within the organization. Develop and review MOPs (Method of Procedure) and SOPs (Standard Operating Procedure)., • Support to improve facility, network cost, efficiency, resiliency and reliability., • Provide support to installation and activation teams on fiber connectivity related questions, design and architecture., • Help support customer installations with a Lightpath collocation facility., • Interface with customers or potential customers, as needed., • Continuously build relationships with vendors and suppliers, as needed., • Be available for after hours, nights, weekends and holidays in case of a facility outage or issue. Qualifications • 10 + years' work experience in collocation facility operations, maintenance, planning, engineering, and or infrastructure deployment., • Management of critical systems in telecommunications facilities is preferred., • A good understanding of telecommunication networks and related equipment., • Strong knowledge of general industry networking technologies, including UPS, Generators, and Mechanical systems., • Strong knowledge of DC and AC power infrastructure in telecommunications and Datacenter environment, including UPS, generators, transformers and power distribution systems., • Experience in the installation of large amp-hour Wet Cell and VRLA battery strings., • Familiarity with various test equipment such as Medtronic's, Fluke, etc., • Working knowledge of building codes, environmental regulations, and safety standards., • Excellent documentation of records and reporting and good communication skills., • Familiar with collocation inventory systems, BMS systems, biometric access, video surveillance systems, electrical and cooling infrastructure systems, OSP networks, cross connect understanding., • Proficiency in using Microsoft Office, including advanced features of Excel and Word, as well as Visio and office systems (e.g., Netcracker, SalesForce, etc.)., • Highly organized and strong interpersonal skills to effectively communicate the impact of design alternatives and negotiating agreements within the project team., • Ability to adapt to a changing environment., • Ability to multitask, prioritize and manage time effectively. Lightpath collects personal information about its applicants for employment that may include personal identifiers, professional or employment related information, photos, education information and/or protected classifications under federal and state law. This information is collected for employment purposes, including identification, work authorization, FCRA-compliant background screening, human resource administration and compliance with federal, state and local law. This position is identified as being performed in/or reporting to company operations in New York State. The pay range at the time of posting in the specified locations is $115,000- $125,000/year. Pay ranges are supplied in compliance with New York State law. Pay is competitive and based on a number of job-related factors, including skills and experience.

Salary: $100,000 - $150,000 per year A bit about us: We are a global consulting and engineering organization dedicated to delivering innovative, sustainable solutions for complex challenges. Job Details Position Summary The Senior Structural Engineer provides technical leadership in the planning, an

Job DescriptionDescription: Aerospace Tool Designer Join our innovative aerospace engineering team as an Aerospace Tool Designer, where you will play a vital role in designing and developing essential tools that support the manufacturing and assembly of aircraft structural components. This position offers an exciting opportunity to contribute to the creation of high-precision tooling solutions that ensure quality and efficiency in aerospace production. Key Responsibilities: • Design, develop, and refine tools, jigs, fixtures, molds, and gauges used in aircraft manufacturing processes., • Support the entire tooling lifecycle, from initial concept and design reviews to procurement, production implementation, and documentation., • Collaborate with cross-functional teams to ensure tooling designs meet engineering specifications, safety standards, and production requirements., • Conduct design reviews and modify tooling based on feedback and testing results., • Maintain accurate documentation and configuration control for all tooling designs and revisions., • Assist in troubleshooting tooling issues during production and implement improvements as needed. Skills and Qualifications: • Strong understanding of manufacturing processes, materials, and aerospace standards in English., • Excellent problem-solving skills and attention to detail., • Ability to work collaboratively in a team environment and communicate effectively., • Knowledge of quality control and documentation procedures related to tooling. We foster a collaborative and innovative work environment that values continuous improvement and professional growth. Our company offers competitive benefits and opportunities to advance your career in the dynamic aerospace industry. Requirements: Key Responsibilities Tool Design & Modeling • Develop detailed 3D models and 2D drawings for a wide range of aerospace tooling, including assembly jigs, fixtures, molds, and gauges., • Design tooling solutions that support complex manufacturing and assembly challenges from concept through production., • Utilize CAD software such as Siemens NX, CATIA V5, and/or SolidWorks to create, modify, and maintain tooling designs., • Apply Geometric Dimensioning and Tolerancing (GD&T) principles to ensure accuracy, repeatability, and manufacturability., • Apply basic structural analysis principles and conduct research to validate tooling concepts and designs., • Ensure tooling meets quality, safety, ergonomic, and regulatory requirements., • Incorporate Design for Manufacturability (DFM) principles to ensure tools can be produced efficiently and cost-effectively., • Manage the complete tooling design lifecycle, from concept development through release to production., • Participate in and lead design reviews; provide constructive feedback to peers and stakeholders., • Develop tooling usage instructions, maintenance plans, and evaluation criteria, including calibration and load-testing requirements., • Support methodization and standardization of tooling and processes to improve product quality and reduce manufacturing cycle times., • Collaboration & Communication, • Work closely with cross-functional teams including Engineering, Manufacturing, Operations, and Quality., • Communicate effectively with internal stakeholders and external vendors to ensure tooling requirements, schedules, and deliverables are met., • Bachelor’s degree in Aerospace Engineering, Mechanical Engineering, Aeronautical Engineering, or a related field, with a minimum of four (4) years of aircraft tooling design experience., • In lieu of a degree, a minimum of eight (8) years of directly related aircraft tooling design experience., • Proven experience designing tooling for aerospace manufacturing or assembly environments is required. This position involves exposure to projects and contracts subject to the International Traffic in Arms Regulations (ITAR). As a result, only U.S. Citizens or Permanent Residents (Green Card holders) are eligible for employment in this role. Applicants must meet these requirements to be considered.

Job Description Hazen and Sawyer is seeking an experienced Principal Architect to lead architectural design efforts across our Northeast Region and support the expanding needs of our clients in the water and wastewater sector. In this architectural leadership role, you will guide and elevate the architectural components of multidisciplinary project teams—overseeing design quality, technical rigor, and integration—while contributing to the planning, design, permitting, and construction of facilities that support and protect critical water infrastructure. The Principal Architect will oversee a diverse portfolio of projects within the “water space,” including but not limited to: • Drinking water and wastewater treatment facilities, • Water resource and conveyance structures, • Associated buildings such as administrative spaces, laboratories, and operational support facilities A sample of Hazen’s Architectural Design can be viewed on our website: Hazen and Sawyer | Architectural Design Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,000 employees in 70+ offices throughout the United States, Latin America, Canada, and the UK., • Lead architectural design from schematic development through construction‑ready documents, ensuring precise technical detailing, appropriate material selection, construction sequencing, and high‑quality specifications., • Review, refine, and integrate architectural details to ensure constructability, clarity, durability, and full alignment with project goals and standards, • Collaborate with engineering, estimating, project management, and field staff to produce fully integrated and constructible designs., • Coordinate with consultants, AHJs, and code officials to ensure regulatory compliance with construction requirements., • Conduct existing conditions assessments and prepare design and technical reports for water and wastewater treatment projects., • Lead renovation, adaptive reuse, and historic restoration efforts, including evaluation of structural and architectural integrity, preservation of architectural features, and integration with modern building systems., • Perform construction administration tasks, including submittal review, responding to RFI’s, site inspections, and field clarifications., • Bachelor of Architecture or BS in Architectural Technology degree from U.S. accredited university, • NYS Registered Architect or NCARB Certification, • 8-10 years of architectural experience with a strong emphasis on detailing and constructability for infrastructure or public works projects, • Demonstrated experience with public bid projects, including budget, schedule, and quality oversight., • Deep understanding of building systems integration (Architectural, Structural, MEP, Civil)., • Proven ability to develop technical, constructible details and understand construction methods and materials., • Proficiency with building codes, environmental regulations, and sustainable design principles., • Strong leadership skills and ability to coordinate effectively with multidisciplinary teams., • Hands-on experience in construction administration and field coordination., • Ability to identify and resolve constructability and detailing issues early in design., • Strong technical writing and communication skills to clearly convey design intent., • Experience with building renovations, rehabilitations, or historic preservation projects., • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships

Job Description Test Engineer - Garden City, New York About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. EDUCATION AND/OR EXPERIENCE • Bachelor’s degree or higher in Mechanical or Aerospace Engineering or a related field, • 2+ years of experience in a similar or related role SUMMARY OF POSITION The Test Engineer is responsible for developing and executing tests to ensure that product quality and reliability meet customer requirements. This role involves collaborating with cross-functional teams to identify testing needs, create test procedures, and analyze results. The Test Engineer will also engage in troubleshooting and problem-solving to ensure product performance. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Prepare and review acceptance and qualification test procedures and corresponding reports for complex aerospace hardware, • Oversee and execute hardware testing, • Analyze test results and ensure compliance with customer requirements, • Install and troubleshoot testing equipment, • Travel as needed to test labs to support testing, • Improve data acquisition system software and hardware, • Assist in the maintenance of test lab equipment, • Maintain database of instrumentation used in the test department, • Research new instrumentation and testing methodologies, • Review calibration of test instruments to verify compliance with quality assurance and customer requirements, • Support disposition of technical issues which occur during manufacturing, • Support customer reviews and inbound requests QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Strong understanding of testing methodologies and best practices, • Expertise in instrumentation and data acquisition, • Knowledge of analog and digital test equipment, • Knowledge of data acquisition software such as LabVIEW, • Knowledge of data processing techniques, Excel preferred, • Knowledge of relevant MIL-STD’s, • Familiarity with 3D modeling and CAD software, • Familiarity with heat and mass transfer, fluid mechanics, thermodynamics, and structural mechanics, • Highly motivated self-starter, • Strong problem-solving skills, • Excellent attention to detail, • Strong verbal and written communication skills, • Capable of thriving in a fast-paced environment PHYSICAL DEMANDS • Ability to work for prolonged periods on a computer or in a lab environment, • Ability to move equipment up to 25 pounds OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $80,000 to $120,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job Description Lead Design Engineer - Garden City, New York About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. EDUCATION AND/OR EXPERIENCE • Bachelor’s degree or higher in Mechanical or Aerospace Engineering or a related field, • 8+ years of progressive engineering experience SUMMARY OF POSITION The Lead Design Engineer is responsible for overseeing the design and development of complex mechanical parts and assemblies. This role focuses on leading technical decision-making, ensuring design integrity, and driving innovation across projects. The Lead Design Engineer will play a key role in cross-functional collaboration, mentoring, and continuous improvement initiatives. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Lead the development of 3D models of complex aerospace hardware, • Prepare design concepts, sketches, layouts, technical drawings, and BOMs, • Serve as the primary technical point of contact for design-related decisions across new and existing products, • Interface with internal and external stakeholders to ensure manufacturability, • Certify technical reviews and other engineering documentation, • Lead cross-functional activities to sustain existing designs, • Manage complete implementation of engineering design change requests, • Lead resolution of technical issues during manufacturing and customer interactions, • Champion process improvement activities related to design engineering, • Support proposals and future product development QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Extensive experience as a Senior Mechanical Design Engineer, Technical Lead, or similar role, • Expertise in parametric CAD design, • Expertise in drawing ANSI standards and GD&T procedures, • Expertise in manufacturing techniques and processes, • Knowledge of material properties and selection process, • Knowledge of FMEAs and quality assurance processes, • Knowledge of relevant MIL-STD’s, • Familiarity with heat and mass transfer, fluid mechanics, thermodynamics, and structural mechanics, • Highly motivated self-starter, • Strong problem-solving skills, • Excellent attention to detail, • Strong verbal and written communication skills, • Capable of thriving in a fast-paced environment PHYSICAL DEMANDS • Ability to work for prolonged periods on a computer or in a lab environment, • Ability to move equipment up to 25 pounds OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $120,000 to $160,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job Description Senior Structural Engineer - Garden City, New York About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. EDUCATION AND/OR EXPERIENCE • Bachelor’s degree or higher in Mechanical or Aerospace Engineering or a related field, • Master’s degree preferred, • 5+ years of experience in a similar role SUMMARY OF POSITION The Senior Structural Engineer is responsible for leading intricate analyses to ensure our products will meet customer requirements. This role requires rigorous application of structural mechanics while adhering to manufacturing, testing, and quality best practices. The Senior Structural Engineer will engage in problem-solving daily and regularly present results to internal and external stakeholders. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Perform critical thermomechanical analyses of complex aerospace hardware through commercial analysis packages and hand calculations, working closely with the design team to rapidly iterate on new product development, • Peer review analyses produced by other structures engineers and subcontractors, • Liaise with customer on heat exchanger requirements, • Generate technical reviews, reports, and other engineering documentation, • Champion process improvement activities related to structural analysis, • Review and approve design changes and test procedures, • Support disposition of technical issues which occur during manufacturing, • Support customer reviews and inbound requests, • Support proposals and future product development QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Extensive experience performing structural analysis for mechanical components (aerospace preferred), • Expertise in commercial FEA software packages, • Expertise in material properties and selection process, • Knowledge of design principles, manufacturing processes, and assembly techniques, • Knowledge of 3D modeling and CAD software, • Knowledge of heat and mass transfer, fluid mechanics, and thermodynamics, • Knowledge of drawing ANSI standards and GD&T procedures, • Highly motivated self-starter, • Strong problem-solving skills, • Excellent attention to detail, • Strong verbal and written communication skills, • Capable of thriving in a fast-paced environment PHYSICAL DEMANDS • Ability to work for prolonged periods on a computer or in a lab environment, • Ability to move equipment up to 25 pounds OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $105,000 to $150,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job Description Project Manager – Environmental Engineering Full-Time | Syosset, Long Island, NY Salary Range $90,000 – $150,000, commensurate with experience and qualifications. About the Company A well-established, multi-disciplinary consulting engineering firm is seeking a talented Project Manager to join its Environmental Engineering team. The firm provides engineering and construction management services to municipal and private clients throughout the Tri-State Region, specializing in civil, structural, traffic, environmental, landscape architecture, mechanical and electrical engineering. Typical project types include transportation infrastructure, utility improvements, site development, solid waste management facilities, and environmental monitoring/reporting programs. Position Summary We are looking for an experienced Environmental Engineering Project Manager with a strong background in environmental and/or civil engineering. This individual will manage design projects, permitting processes, and environmental monitoring/reporting tasks. The ideal candidate will also support business development initiatives and have clear potential to grow into a senior leadership role. Key Responsibilities * Lead and manage project teams, schedules, deliverables, and budgets. * Serve as primary client contact, ensuring excellent communication and service. * Support business development activities, including proposal preparation and client presentations. * Oversee and prepare engineering design plans, specifications, and cost estimates. * Develop contract bid packages and funding applications. * Prepare technical reports, environmental permit applications, and related documentation. Qualifications * Bachelor's degree in Environmental, Chemical, or Civil Engineering; Master's in Environmental Engineering is a plus. * 10–15 years of relevant engineering experience. * Active NYS Professional Engineer (PE) license required. * Strong knowledge of New York State regulations, specifications, and codes. * Proficiency with industry-standard software (e.g., Microsoft Office, CAD). * Proven experience in project management, technical writing, and business development is highly preferred.

Job Description Hazen and Sawyer is seeking a Construction Inspector to support the construction of water and wastewater treatment facilities and infrastructure located in the greater NYC Metro area and Springfield, MA. The selected candidate will inform the CM team by observing and reporting on construction activities, effectively coordinating and collaborating with the project team members, and providing documentation and inspection activities for various water and wastewater facilities and infrastructure. Responsibilities include: • Review and interpret project drawings, specifications and work plans to verify contractor compliance;, • Conduct on-site observation, monitoring, inspection, and evaluation of construction activities;, • Verify and track work in accordance with approved shop drawing submittals;, • Observe contractor performance and compliance with safety requirements;, • Prepare daily reports, verify material quantities, Time and Material (T&M) records and review contractor pay applications;, • Monitor construction contractor’s adherence to project schedule and sequence of activities related to daily field observations;, • Maintain project redline and as-built drawings;, • Coordinate and communicate effectively with the CM Project team, multi-discipline engineering teams, contractors and third-party inspection/testing firms;, • Assist and coordinate with project start-up, testing checkout and training activities;, • Minimum 5 years of construction / construction observation experience;, • Familiarity with construction methods typical of civil, structural, mechanical and/or electrical engineering work;, • Excellent verbal, written, and interpersonal skills, organizational and problem-solving skills;, • Experience working on and collaborating with multidisciplinary teams, • Willing to travel and stay local to projects in the NYC Metro area as needed., • Proficiency with Microsoft Office Suite, Microsoft Project and related PC software packages used on construction projects, • Experience in municipal water and wastewater or similar industry construction inspection preferred

H2M Architects + Engineers, a multidiscipline architectural, engineering, environmental consulting firm in Melville, NY seeks a. Bachelor’s degree in Civil Engineering with a concentration in Structural Engineering. Manages and leads a design team in the execution and delivery of structural engine

Job DescriptionMulti-discipline architectural, engineering, and environmental consulting firm is seeking a Senior Structural Engineer for their Huntington, New York office! Responsibilities: • Lead/manage the design team in executing/delivering structural engineering assignments and plans, • Prepare calculations, charts and graphs, • Monitor work for code compliance and accepted engineering practices, • Projects include low to mid rise buildings and concrete structures, • Perform inspection/analysis of existing buildings, • Oversee development of construction drawings and design specifications for bids, • Develop proposal letter that includes technical scope and fee, • Prepare client letters and reports, • Manage projected financial budgets, • Mentor/train junior staff Requirements: • Bachelor’s degree in Civil Engineering with a focus on Structural Engineering, • 8+ years of Structural Engineering experience, • EIT required, • PE License preferred, • Experience managing budgets, • Supervisory experience, • Experience writing proposal preferred, • Knowledge of ETABS, STAAD.Pro, RAM preferred, • Knowledge of Revit preferred, • Proficient in Microsoft Word and Excel Salary is commensurate with experience. Successful applicants must be authorized to work in the USA without sponsorship. All qualified applicants will receive consideration for employment without regard to protected veteran status, disability, race, color, religion, sex, sexual orientation, gender identity, or national origin. Please contact Laura Harrison for further information! 517-906-6926

Job DescriptionCompany Description SOCOTEC is a provider of niche consulting services within the architecture, engineering and construction industries focusing on high-performance buildings and specialty structures. Through an integrated, holistic approach, our professionals provide solutions for building envelope, energy efficiency, sustainability, code advisory and construction advisory projects SOCOTEC’s combination of expertise, experience and methods are increasingly recognized as best-in-class fueling significant growth. SOCOTEC is proud to announce that it has been officially certified as a Great Place to Work by the renowned global authority on workplace culture, Great Place to Work®. Job Description The Field Operations Project Manager will oversee and coordinate construction materials testing and special inspection services for multiple projects within assigned territories. This role requires strong technical knowledge, exceptional organizational skills, and the ability to manage field personnel while ensuring compliance with industry standards and client requirements. Key Responsibilities: Project Management • Plan, coordinate, and oversee field testing and inspection activities across multiple construction sites, • Manage project schedules, budgets, and resource allocation to ensure timely delivery of services, • Serve as primary point of contact for clients, contractors, and internal teams, • Prepare project scope of work and cost estimates for specialty work when needed, • Ensure testing and inspection services comply with applicable codes, standards, and specifications (ACI, ASTM, IBC, etc.), • Review technical reports prepared by field technicians and inspectors, • Provide technical guidance and support to field personnel, • Conduct quality control reviews of field operations and testing procedures, • Supervise, mentor, and evaluate field technicians and inspectors, • Coordinate staffing assignments and maintain adequate coverage across all active projects, • Conduct performance reviews and identify training needs, • Maintain strong relationships with clients, architects, engineers, and contractors, • Address client concerns and resolve issues promptly and professionally, • Identify opportunities for additional services and business development, • Ensure strict adherence to company safety policies and OSHA regulations, • Complete all duties as assigned by your managerQualifications Education and Experience • Minimum 5-7 years of experience in construction materials testing and special inspections, • ACI Concrete Field Testing Technician - Grade I (required), • ICC Special Inspector certifications (Structural Steel, Concrete, Masonry) preferred, • NICET certification in Construction Materials Testing or related discipline preferred, • Thorough understanding of construction materials, testing procedures, and quality control principles, • Proficiency in relevant codes and standards (IBC, ACI 318, ASTM, etc.), • Strong knowledge of concrete, soils, asphalt, structural steel, and masonry testing, • Excellent organizational and time management abilities, • Strong verbal and written communication skills, • Proven leadership and team-building capabilities, • Analytical thinking and problem-solving skills, • Ability to work independently and make sound decisions, • Position requires frequent travel to construction sites within assigned territory, • Must be able to work in outdoor environments and various weather conditions, • Flexibility to work extended hours, weekends, or emergency calls as needed, • Physical requirements include walking construction sites, climbing stairs/ladders, and lifting up to 50 pounds Additional Information SOCOTEC offers a competitive benefits package and an exciting & inclusive company culture where we foster learning and growth through our mentorship program, continuing education support, and other initiatives. For more information, please visit Job Type: Full-Time Your information will be kept confidential according to EEO guidelines. SOCOTEC is an Equal Opportunity Employer. SOCOTEC is an Equal Opportunity Employer.

As a member of the Product Support Engineering team you will be tasked with investigating a variety of problems including RF/Analog, assembly, SMT and test related. Working with design engineering and manufacturing teams to introduce new designs into manufacturing. Working with design engineering to

Nesco Resource - - Responsibilities: performing routine maintenance on all CNC machinery and equipment; troubleshooting and repairing machinery and equipment; ensuring a safe and functional environment; The Machine Maintenance Technician will perform maintenance and repair of all CNC machinery and

Job Title: Senior Specialist, Electrical Engineer (RF Design) Job Code: 33481 Job Location: Rochester, NY Job Schedule: 5/8: Employees work 8 hours per day, 5 days a week Job Description: As a member of the Product Support Engineering team you will be tasked with investigating a variety of pro

National Church Residences - - Responsibilities: Perform routine inspections, preventive maintenance, and necessary repairs; Diagnose and repair HVAC, plumbing, electrical, and mechanical system issues; Maintain interior and exterior common areas, ensuring safety and cleanliness; Complete minor car

As a member of the Product Support Engineering team you will be tasked with investigating a variety of problems including RF/Analog, assembly, SMT and test related. Working with design engineering and manufacturing teams to introduce new designs into manufacturing. Working with design engineering to

Compass Group - - Responsibilities: Maintains, repairs, cleans and operates the plant, shops, mechanical areas, exterior grounds and campus facilities; Provides fleet maintenance support including welding, plumbing, electrical, and generator fixes; Maintains logs, performs rounds and completes main

Atria Senior Living - - Responsibilities: Diagnose and repair problems in HVAC, electrical, plumbing, major appliances, carpentry, emergency systems, flooring, hardware accessories, masonry, painting/wallpaper, water features (pools, spas, etc.Complete assigned service requests and repairs consiste

Island Hospitality Management - - Responsibilities: Perform routine and preventative maintenance on resort facilities; Complete minor repairs to rental homes and facilities; Inspect irrigation systems, playgrounds, pool/spa, and recreational amenities; Maintain resort pool(s) and test chemical leve

Overview: We are seeking a HVAC and General Maintenance Technician to join our team.The ideal candidate will have a background in facilities maitenance, mechanical knowledge, and the ability to perform various tasks related to building upkeep.Will travel from store to store doing maintenance in a co

Overview: We are seeking a HVAC and General Maintenance Technician to join our team.The ideal candidate will have a background in facilities maitenance, mechanical knowledge, and the ability to perform various tasks related to building upkeep.Will travel from store to store doing maintenance in a co

Building Maintenance Technician.MMS Group is seeking an experienced Building Maintenance Technician for a 420-unit residential property located in Hempsted, New York.Regular Maintenance: Maintain residential apartment homes and other areas on the property, including building exteriors, interiors, an

Hassle Free Home Services was born out of a realization that homeownership came with its share of surprises a never-ending to-do list, constant maintenance, and unexpected upgrades.Since 2003, we've assisted hundreds of homeowners with a simple motto: "one call solves it all.Our monthly home mainte

Bachelor's degree in Electrical Engineering or equivalent field.

We are looking for a Maintenance Technician to undertake the responsibility to preserve the good condition and functionality of the SJCC.You will perform maintenance tasks of great variety such as painting, HVAC, plumbing, carpentry, landscaping etc.A Maintenance Technician is a professional with th

Build your Career with an Industry Leader.As the global leader of premium labels, MCC helps brands stand out in competitive markets and inspire positive consumer experiences.Backed by over a century of printing experience, MCC is focused on the future by developing consumer-driven innovations and su

Location : 999 South Oyster Bay Road, Bethpage, NY 11714.Citizenship Requirement: US Citizens.WORK SHIFT: 1st Shift (9/80A) - every other Friday off but OT may result in working off-Friday's or weekends as needed).Typically performs work in one or more of the maintenance trades: carpentry, plumbing,

Bridges of New York, a transitional housing program, is looking for a part-time.Position is a part time position up to 10 Hours per week.RESPONSIBILITIES include the following:.Must be able to perform the major functions of job with or without an accommodation.Required to attend all mandatory traini

Cargill Animal Nutrition is a global business that serves large-scale feed mill operators and retailers, as well as individual farmers.Our business has provided better nutrition for better lives for more than 120 years.By leading, innovating, and transforming the animal nutrition & health industry,

As one of the nation's largest suppliers of appliance and HVAC parts, we like to do things a little differently.At Encompass, we believe in building a team that feels more like family-not the kind you see once a year, but the kind you count on every day.We serve both businesses and consumers through

The Maintenance Technician is responsible for overseeing the maintenance and upkeep of the machinery within JBF Stainless.This position directs and organizes all tasks related to maintenance of equipment and the building.Please note this is not a housekeeping or groundworks position.Use equipment, i

Are you searching for an exciting career opportunity within a dynamic team? Look no further! Walmart is expanding its workforce and looking for a Senior General Facilities Maintenance Technician to join our local, and regional team.If you have experience in this field, we want you to bring your skil

No remote option; must work at a specified Cox location.The hourly base rate may vary within the anticipated range based on factors such as the ultimate location of the position and the selected candidate's knowledge, skills, and abilities.Position may be eligible for additional compensation that ma

Are you Ready to Launch Your Career?.Catholic Charities Disabilities Services.Imagine yourself as part of an organization with a profound commitment to making a positive impact.When you choose Catholic Charities, you step into a world of endless opportunities, where your efforts collectively contrib

Civil Engineering Project Engineer and Project Manager – Land Development.

Cargill Animal Nutrition is a global business that serves large-scale feed mill operators and retailers, as well as individual farmers.Our business has provided better nutrition for better lives for more than 120 years.By leading, innovating, and transforming the animal nutrition & health industry,

With a unique portfolio spanning surface engineering, high-performance materials, coating equipment and components, we make products better by enhancing performance, efficiency and sustainability.

The Maintenance Team members are responsible for repairing and maintaining all company equipment,structures and furnishings at The Great Escape Lodge.FREE admission to Great Escape and other Six Flags properties!.FREE tickets and discounts to local attractions!.FREE tickets for friends & family!.Ove