Trabajos test technician en New Brunswick, New JerseyCrear alertas

Job DescriptionBenefits/Perks • Competitive Compensation, • Career Advancement OpportunitiesJob Summary: We are looking for a skilled and experienced HVAC Technician to join our team! In this role, you will install, service, or repair heating and air conditioning systems in residences or commercial establishments. You have past experience in an HVAC service technician role and hold an EPA certification. A team player who is comfortable working independently, you love the feeling of a job well done and take pride in completing customer jobs with efficiency. A positive attitude is a must! Responsibilities: • Repair or service PTAC heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, or refilling non-toxic refrigerants, • Establish customer rapport to ensure the highest levels of satisfaction, • Test pipe or tubing joints or connections for leaks, using a pressure gauge or soap-and-water solution, • Test electrical circuits or components for continuity, using electrical test equipment, • Repair or replace defective equipment, components, or wiringQualifications:, • Past experience as an HVAC service technician or comparable education, • Valid Drivers License, • EPA Certification, • Experience with operation and maintenance of chillers, heat pumps, air handlers, and geothermal systems, • Ability to climb ladders, crawl, and lift 40 poundsBilingual a plus+

Job DescriptionBenefits: • Competitive salary, • Dental insurance, • Health insurance Benefits/Perks • Flexible Scheduling, • Competitive Compensation, • Career Advancement OpportunitiesJob Summary: We are looking for a skilled and experienced HVAC Technician to join our team! In this role, you will install, service, or repair heating and air conditioning systems in residences or commercial establishments. You have past experience in an HVAC service technician role and hold an EPA certification. A team player who is comfortable working independently, you love the feeling of a job well done and take pride in completing customer jobs with efficiency. A positive attitude is a must! Responsibilities: • Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, or refilling non-toxic refrigerants, • Establish customer rapport to ensure the highest levels of satisfaction, • Test pipe or tubing joints or connections for leaks, using a pressure gauge or soap-and-water solution, • Test electrical circuits or components for continuity, using electrical test equipment, • Repair or replace defective equipment, components, or wiring, • Complete service tickets/reports on each and every job.Qualifications:, • Past experience as an HVAC service technician or comparable education, • Valid Drivers License, • EPA Certification, • Experience with operation and maintenance of boilers, heat pumps, air handlers, and geothermal systems, • Commercial and residential experience preferred, • Ability to climb ladders, crawl, and lift 40 pounds

Job DescriptionConstruction Equipment Technician Location: Old Bridge, NJ Schedule: Full-Time | 40+ Hours Per Week Employment Type: 6-Month Contract-to-Hire Build Your Career Operating Heavy Equipment Are you an experienced Heavy Equipment Operator looking for a stable opportunity with long-term growth? Join a specialized team performing environmental remediation and drilling projects throughout New Jersey. This position offers hands-on work with excavators, dozers, skid steers, and other heavy equipment while providing a clear path to permanent employment. If you enjoy working outdoors, operating machinery, and being part of a skilled crew that takes pride in safety and quality work, we want to hear from you. What You'll Be Doing • Operate excavators and dozers on commercial remediation and drilling projects., • Safely move soil, materials, and debris while maintaining production goals., • Utilize both CAT and DEERE control patterns with confidence and precision., • Load and unload heavy equipment from trailers safely and efficiently., • Assist with site preparation, drilling support, excavation, and general construction activities., • Conduct daily equipment inspections and report maintenance concerns., • Work closely with a small, highly skilled crew to complete projects safely and on schedule., • Maintain clean and organized job sites, equipment, and work areas., • Follow all environmental, safety, and Hazwoper requirements.What We're Looking For, • Experience operating excavators and dozers in construction, excavation, remediation, utility, earthwork, or similar environments., • Ability to operate excavators with both CAT and DEERE control configurations., • Current 40-Hour Hazwoper Certification with an active 8-Hour Refresher., • Experience loading and unloading heavy equipment., • Strong understanding of safe operating procedures and construction site safety., • Willingness to help on the ground when equipment operation is not required., • Reliable, safety-focused, and team-oriented mindset.Preferred Qualifications, • Experience with remediation or drilling projects., • Experience operating skid steers, backhoes, loaders, or other heavy equipment., • CDL Class A license., • Experience working on excavation, earthwork, utility, environmental, or site development projects., • Ability to work effectively in changing weather conditions and outdoor environments.Why Join Our Team?, • Clear path from contract to permanent employment., • Opportunity to work on specialized environmental remediation projects., • Hands-on experience operating a variety of heavy equipment., • Join a professional, safety-focused team., • Consistent work and long-term career potential., • Expand your equipment operating skills and industry knowledge., • Be part of projects that make a positive impact on local communities and environments.Ideal Backgrounds We encourage candidates with experience in the following industries to apply: • Heavy Equipment Operation, • Excavation, • Site Development, • Utility Construction, • Earthwork, • Environmental Remediation, • Demolition, • Drilling, • Road Construction, • Civil Construction, • Pipeline Construction Job Type & Location This is a Contract position based out of Old Bridge, NJ. Pay and Benefits The pay range for this position is $20.00 - $26.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Old Bridge,NJ. Application Deadline This position is anticipated to close on Sep 30, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job DescriptionCarvana Diesel Technician: Join Our Fleet Maintenance Team! Join our rapidly growing team at Carvana, where we're revolutionizing the car buying experience! We're seeking a skilled and dedicated Diesel Technician to join our innovative Fleet Maintenance team. If you're a problem-solver who enjoys working on Class 8 trucks and trailers and is passionate about vehicle uptime, we want to hear from you. Why You'll Love Working Here We're proud to offer our team members a supportive, collaborative environment and outstanding benefits. • Competitive Pay & Benefits:, • Competitive hourly compensation and overtime opportunities, • Comprehensive medical, dental, and vision coverage, • Matching 401k, • PTO: Accrue 104 hours in your first year!, • Tool Allowance: Receive a $500 annual tool allowance to keep your equipment up-to-date., • Boot Allowance: Get a $100 boot allowance every 6 months to ensure you have the right gear., • Investments in Your Future:, • ASE certification reimbursement (we cover the cost!), • Tuition reimbursement and student loan repayment programs, • Opportunities for growth and advancement within a rapidly expanding company, • Internal training, including classroom time for DTNA ARC Certification, • Unique Perks:, • Carvana employee discount on vehicle purchases, • Pet benefits and much more! $2000-$4000 Sign on Bonus! A Day in the Life: What You'll Be Doing As a Diesel Technician, you'll be a key part of our Fleet Maintenance team, ensuring our Class 8 fleet is safe and reliable. Our fleet is primarily day cabs and trailers, all under manufacturer warranty—meaning no major engine overhauls or roadside calls. You'll perform a variety of tasks, with clear pathways for growth: • Routine Maintenance & Repair: Perform preventative maintenance, inspections, and component replacements on our fleet., • Diagnostics: Utilize diagnostic tools and software to troubleshoot complex electrical, engine, and transmission problems., • System Repairs: Address issues with aftertreatment systems (DEF/emissions), perform regens, and change filters., • Collaborate & Optimize: Work with your team to maintain accurate records, optimize vehicle performance, and minimize downtime., • Safety First: Adhere to all safety protocols and industry best practices to ensure our fleet is always DOT compliant.What We're Looking For We're searching for skilled professionals with a strong background in diesel technology. • Experience: 3+ years of experience with Heavy-Duty Class 8 trucks and trailers or similar equipment (e.g., agricultural, construction, waste collection truck)., • Technical Skills:, • Strong diagnostic and troubleshooting skills for diesel engines, transmissions, and vehicle systems., • Proficiency with diagnostic software and using a laptop for manuals., • Experience with aftertreatment systems and electrical diagnostics., • Comfortable with MIG welding is a plus., • Certifications & Training:, • A minimum of two ASE Certifications within the first 6 months of employment (we'll reimburse you!)., • T-series ASE Certifications are highly valued., • Requirements:, • A valid Driver's License with clean driving record, • Ability to perform physical tasks associated with vehicle maintenance (lifting, bending, etc.)., • Strong attention to detail and a commitment to quality workmanship., • A solid attendance record and punctuality are essential for this role.About Carvana At Carvana, we're on a mission to change the way people buy cars. We're a technology company bringing transparency and convenience to the car buying process. We believe in putting the customer first and fostering a culture of innovation and collaboration. Our team members are our greatest asset, and we're committed to providing a workplace where everyone can thrive. Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check and drug test. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job DescriptionBenefits: • Bonus based on performance, • Company car, • Competitive salary, • Free uniforms, • Opportunity for advancement, • Paid time off, • Training & development Benefits/Perks • Competitive Compensation, • Career Advancement Opportunities, • The company provides reliable trucks, NJ Ez Pass, Fuel Card, uniforms, iPads, • PTO and Sick Hours PlanJob Summary: We seek skilled and experienced HVAC Technicians to join our team! In this role, you will install, service, or repair heating and air conditioning systems in residential or commercial establishments. You have 15+ years of experience in an HVAC service technician role and hold an EPA certification. A team player who is comfortable working independently, you love the feeling of a job well done and taking pride in completing customer jobs with quality and efficiency. A positive attitude is a must! Responsibilities: • Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, custom ducts, or refilling non-toxic refrigerants, • Establish customer rapport to ensure the highest levels of satisfaction, • Test pipe or tubing joints or connections for leaks, using a pressure gauge or soap-and-water solution, • Test electrical circuits or components for continuity, using electrical test equipment, • Repair or replace defective equipment, components, or wiringQualifications:, • Experience with 15+ years as an HVAC service technician or comparable education, • Valid Drivers License with good standing and clean records in the past 5 years, • EPA Certification, • Experience with operation and maintenance of chillers, rooftop units, heat pumps, air handlers, and geothermal systems, • Ability to climb ladders, crawl, and lift 40 pounds, • Availability to work overtime and on weekends for serious emergency calls, • Must be NJ resident and live within 25 miles radius of zip code 08816

Job Description Overview: We are seeking an experienced and highly skilled Automotive Technician A/B (Tech A/B) to join our team. As a Senior-Level Technician, you will handle advanced diagnostics, major repairs, and contribute to the overall excellence of our shop. You’ll also mentor less experienced technicians if needed and help maintain the high service standards that our customers expect. Responsibilities: • Perform complex diagnostics and mechanical/electrical repairs on all kinds of vehicle systems, including engines, transmissions, brakes, HVAC, and electronics., • Use OEM and third-party diagnostic software and scan tools to troubleshoot issues accurately., • Conduct test drives and/or inspections to verify repairs and ensure quality workmanship., • Maintain clear, thorough documentation of all work performed., • Ensure all work is performed in compliance with safety protocols and shop standards. Qualifications: • ASE Master Certification, • Minimum 7 to 10+ years of automotive repair experience in a professional setting., • Proficiency with diagnostic tools, service software, and repair procedures., • Valid driver’s license with a clean driving record., • Ability to lift up to 50 lbs and perform physically demanding tasks., • Strong attention to detail, professionalism, and a commitment to high-quality work and project delivery within requested time frame., • Willingness to take a Drug Test and/or Background Check if requested. Compensation & Benefits: • Salary: $100,000+ annually, depending on experience., • Comprehensive benefits package, including:, • Health, dental, and vision insurance, • 401(k) with employer match, • Paid time off and holidays, • Competitive, performance-based pay structure\nCompany Description Really good automotive shop with high rating and always busy. Really good automotive shop with high rating and always busy.

Job DescriptionCarvana Diesel Technician: Join Our Fleet Maintenance Team! Join our rapidly growing team at Carvana, where we're revolutionizing the car buying experience! We're seeking a skilled and dedicated Diesel Technician to join our innovative Fleet Maintenance team. If you're a problem-solver who enjoys working on Class 8 trucks and trailers and is passionate about vehicle uptime, we want to hear from you. Why You'll Love Working Here We're proud to offer our team members a supportive, collaborative environment and outstanding benefits. • Competitive Pay & Benefits:, • Competitive hourly compensation and overtime opportunities, • Comprehensive medical, dental, and vision coverage, • Matching 401k, • PTO: Accrue 104 hours in your first year!, • Tool Allowance: Receive a $500 annual tool allowance to keep your equipment up-to-date., • Boot Allowance: Get a $100 boot allowance every 6 months to ensure you have the right gear., • Investments in Your Future:, • ASE certification reimbursement (we cover the cost!), • Tuition reimbursement and student loan repayment programs, • Opportunities for growth and advancement within a rapidly expanding company, • Internal training, including classroom time for DTNA ARC Certification, • Unique Perks:, • Carvana employee discount on vehicle purchases, • Pet benefits and much more! $2000-$4000 Sign on Bonus! A Day in the Life: What You'll Be Doing As a Diesel Technician, you'll be a key part of our Fleet Maintenance team, ensuring our Class 8 fleet is safe and reliable. Our fleet is primarily day cabs and trailers, all under manufacturer warranty—meaning no major engine overhauls or roadside calls. You'll perform a variety of tasks, with clear pathways for growth: • Routine Maintenance & Repair: Perform preventative maintenance, inspections, and component replacements on our fleet., • Diagnostics: Utilize diagnostic tools and software to troubleshoot complex electrical, engine, and transmission problems., • System Repairs: Address issues with aftertreatment systems (DEF/emissions), perform regens, and change filters., • Collaborate & Optimize: Work with your team to maintain accurate records, optimize vehicle performance, and minimize downtime., • Safety First: Adhere to all safety protocols and industry best practices to ensure our fleet is always DOT compliant.What We're Looking For We're searching for skilled professionals with a strong background in diesel technology. • Experience: 3+ years of experience with Heavy-Duty Class 8 trucks and trailers or similar equipment (e.g., agricultural, construction, waste collection truck)., • Technical Skills:, • Strong diagnostic and troubleshooting skills for diesel engines, transmissions, and vehicle systems., • Proficiency with diagnostic software and using a laptop for manuals., • Experience with aftertreatment systems and electrical diagnostics., • Comfortable with MIG welding is a plus., • Certifications & Training:, • A minimum of two ASE Certifications within the first 6 months of employment (we'll reimburse you!)., • T-series ASE Certifications are highly valued., • Requirements:, • A valid Driver's License with clean driving record, • Ability to perform physical tasks associated with vehicle maintenance (lifting, bending, etc.)., • Strong attention to detail and a commitment to quality workmanship., • A solid attendance record and punctuality are essential for this role.About Carvana At Carvana, we're on a mission to change the way people buy cars. We're a technology company bringing transparency and convenience to the car buying process. We believe in putting the customer first and fostering a culture of innovation and collaboration. Our team members are our greatest asset, and we're committed to providing a workplace where everyone can thrive. Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check and drug test. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job Description Job Title: Diesel Technician Job Description We are seeking a skilled Diesel Technician to work on with Volvo/Prevost buses. The ideal candidate will possess mechanical aptitude and experience in maintenance and repair, with a focus on troubleshooting and preventive maintenance. Responsibilities • Remove and replace or repair seats on Volvo/Prevost buses., • Use OEM software and diagnostic platforms to troubleshoot complex coach systems., • Run diagnostic tests to identify issues and repair engines, electrical systems, air conditioning, steering, and braking systems. Shift: 1st shift (7-3:30) for 3-6 Months of training, then you will transition to 3-11:30 Essential Skills • Mechanical aptitude is required., • Experience with hand tools is essential., • Ability to troubleshoot and perform preventive maintenance. Additional Skills & Qualifications • Must have own tools. Why Work Here? Join a company that offers a dynamic work environment, focusing on innovative solutions and technical expertise. Employees are valued for their skills and provided with opportunities to work with advanced technologies. Work Environment This position involves working on Volvo/Prevost buses using OEM software and diagnostic platforms. The role requires hands-on engagement with mechanical systems, demanding proficiency with hand tools. Employees are expected to provide their own tools for the job. Job Type & Location This is a Contract to Hire position based out of South Plainfield, NJ. Pay and Benefits The pay range for this position is $22.00 - $26.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in South Plainfield,NJ. Application Deadline This position is anticipated to close on Oct 9, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Who We Are Binsky, a large-scale mechanical contracting and service provider located in Piscataway NJ is seeking a HVAC Commercial Service Technician Why We Need You! We need talented individuals, like you, who care about the company and our customers, and can help us continue to grow and succeed! The Role HVAC service technicians repair and maintain heating and cooling equipment in commercial, and industrial settings. In this role, HVAC service technicians examine faulty equipment, conducting tests with a variety of devices to locate, diagnose, and isolate issues that interrupt performance or create hazards. In many cases, HVAC service technicians follow regular maintenance schedules to keep systems working reliably, but also need to conduct emergency service to make rapid repairs to customer systems. This role requires a balance of technical and mechanical skills, knowledge about HVAC systems and components, and customer service in order to successfully troubleshoot HVAC issues and make necessary repairs. This full-time position may also require some travel, as these technicians work on-site Responsibilities: Maintain HVAC Systems • Many of the HVAC service technician’s day-to-day duties involve performing regular or routine maintenance tasks on HVAC systems. These tasks can include clearing intake and outflow vents of dust and debris, ensuring that filtration systems are clean and effective, and replacing registers in residential or commercial locations. An HVAC service technician may also perform seasonal maintenance as a building’s system switches between heating and cooling functions. Troubleshoot HVAC Equipment • Troubleshooting HVAC systems and system elements is another major duty of the HVAC service technician. Working from issues reported by customers or problems that arise during routine maintenance and system testing, the HVAC service tech attempts to determine which components are at fault. These technicians then determine whether the system or element can be repaired or if it needs to be replaced. Repair and Replace HVAC Systems • HVAC technicians perform a variety of repairs for HVAC systems, ranging from simple parts replacements to complex issues that require a complete replacement of the HVAC system. If an entire system needs to be replaced, the HVAC service technician needs to install and test all new components. For simple repairs, they may replace one or more parts and conduct new tests to ensure that the repairs have restored the system to working order. Consult with Customers • HVAC service technicians frequently consult directly with customers, both to gather information about performance issues and to provide cost and time estimates related to repair and maintenance tasks. Throughout the repair process, these technicians may also provide the customer with updates, answer questions about the system, and provide advice on operations and maintenance Ensure Safe Repair and Operations • While diagnosing and repairing HVAC systems, the service technicians also maintain safe operations and follow best practices for safely working with the system. In most cases, this includes disconnecting the system from its power source to reduce the risk of electric shock. They may also ensure that the areas around the system are dry and free of clutter. For oil and gas-based heating systems, HVAC technicians also ensure that the fuel systems are disconnected before starting repair work. Maintain Customer and Service Records • HVAC technicians also maintain documentation related to customer systems and the services they perform. This helps to ensure that maintenance is performed according to schedule, and it also provides data related to ongoing or recurring issues with the system. HVAC technicians may also prepare documents for customers, including troubleshooting steps they can take between regular maintenance. Qualifications / Skills: • Experience conducting routine and emergency repairs to HVAC systems while interacting directly with customers., • Have a strong grasp of best practices and principles related to HVAC system installation, maintenance, and operations, • Excellent troubleshooting and problem solving skills, • Provide outstanding customer service and answer customer questions, • Effective communication with customers and other trade professionals. such as plumbers and electricians, • Chiller, black or blue seal licenses and VFD experience is a plus Union Card • Active and in good standing Binsky values the well-being of its employees and offers competitive wages and a range of benefits. Binsky is an EOE. This job description does not necessarily represent an exhaustive list of responsibilities, skills, duties, requirements, efforts or working conditions associated with the job. While this is intended to be an accurate reflection of the job, management reserves the right to revise the job or require that other different tasks are performed as circumstances change.

Position Description Ryder is hiring an experienced Mid-Level Diesel Technicianin South Plainfield, New Jersey — offering weekly pay, excellent benefits, and a Technician career you can feel good about. Hear it from a Ryder Technician Employee Here: https://RyderCareers.Video/T2James • Hourly Pay: $33.00 per hour, • Certification Bonus of $100 for each New ASE Certification Obtained up to $700, • Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year, • Schedule: Monday–Friday Weekends OFF, • Hours: Second Shift 2:30 pm – 11:00 pm We want the right Maintenance Repair Mechanic to join us at Ryder to work on Heavy Duty Vehicles. Apply Here with Ryder Today Spots are filling fast — click apply now to secure your spot. Questions? Call Aubrey or text “South Plainfield ” to 904-420-7747 to speak with your recruiter today. All the benefits you expect — without the wait. • Medical, Dental, Vision after 30 days, • 80 hours PTO your first year, starting Day 1, • Yearly merit pay increases, • 401 (k) company match, • PPE, uniforms, and boot allowance, • Build your skills - paid training, • Safety‑first workplace & State-of-the-art equipment, • Top Tech Competition: Earn $250 – $50,000 per year, • U.S. military veterans - extra paid day off, • 15% company stock discount, • Up to $5,000 in Tech tuition repayment, • 12 weeks paid maternity leave (subject to specific eligibility criteria, including work tenure), • Employee discounts on tools, vehicles, travel, tech & more Click Here to See All Ryder Careers:https://www.ryder.com/careers/diesel-technicians We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire everyday Refer anyone and get rewarded with UNLIMITED bonuses up $1,500 for every Ryder hired Diesel Mechanic, Service Employee, Driver, Warehouse Associate and more! EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools, required, • Demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, required, • Two (2) years or more of a combination of classroom training and work experience in required experience, preferred, • Valid Commercial Driver License (CDL) CLASS A,preferred, • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Must be able to obtain CDL within 6 months after hire, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test, • Pass a Ryder Background and Motor vehicle check including drug and alcohol verification from previous employers for the last 3 years Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. Responsibilities • Performs vehicle maintenance and repair duties, • Performs standard vehicle maintenance, • Performs standard component inspections and repairs, • Performs preventive maintenance, • Diagnoses standard mechanical and electronic problems, utilizing diagnostic computer when applicable, • Identifies root cause of basic failures/conditions and perform repairs as required, • Replaces defective components as instructed, • Performs facility maintenance duties, • Interacts with customers/drivers to properly determine nature of complaint once assigned a task, • Utilizes key functions of Shop Management System and electronic documentation available, • Works in accordance with all federal/ provincial and corporate compliance guidelines (i.e., safety, DOT, MOT), • Performs other support duties as required to support operations. These could include but are not limited to Service Island support Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. Posted Date 7 hours ago (9/29/2026 1:19 PM) Requisition ID 2026-211797 Location (Posting Location) : State/Province NJ Location (Posting Location) : City SOUTH PLAINFIELD Location (Posting Location) : Postal Code 07080 Category Technicians/Service Employees4 Employment Type Regular-Full time Travel Requirements 0-10% Position Code 1000120 Min Pay USD $33.00/Hr. Max Pay USD $33.00/Hr.

Position Description Ryder is hiring a Mid-Level Diesel Technician in South Plainfield, New Jersey — providing a stable company for your career with weekly pay and excellent benefits. Hear it from a Ryder Technician Employee Here: https://RyderCareers.Video/T2James • Hourly Pay: $32.00 per hour, • Certification Bonus of $100 for each New ASE Certification Obtained up to $700, • Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year, • Schedule: Monday–Friday Weekends OFF, • Hours: First Shift 6:00 am – 2:30 pm We provide the best State-of-the-Art Diagnostics and Tools to all Ryder Maintenance Repair Mechanics who work on Heavy Duty Vehicles Spots are filling fast — click apply now to secure your spot. Questions? Call Misty or text “South Plainfield NJ” to 904-869-3515 to speak with your recruiter today. Apply Here with Ryder Today All the benefits you expect — without the wait. • Medical, Dental, Vision after 30 days, • Earn PTO starting Day 1. Up to 80 hours accrued in 1st year, • Yearly merit pay increases, • 401 (k) company match, • PPE, uniforms, and boot allowance, • Paid training that keeps you ahead, • Safety‑first workplace & State-of-the-art equipment, • Top Tech Competition: Earn $250 – $50,000 per year, • U.S. military veterans - extra paid day off, • 15% company stock discount, • Up to $5,000 in Tech tuition repayment, • 12 weeks paid maternity leave (subject to specific eligibility criteria, including work tenure), • Employee discounts on tools, vehicles, travel, tech & more Click Here to See All Ryder Careers:https://www.ryder.com/careers/diesel-technicians At Ryder, you will be recognized and respected for your expertise and skill by joining a community of proud women and men in logistics, including many Military Reservists and Veterans. Ryder provides a clear path for career development and advancement. Share Ryder jobs with people you know-get paid for it. Ryder offers unlimited bonuses up to $1,500 for every hired Diesel Mechanic Technician and Fuel Service Employee. EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools, required, • Demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, required, • Two (2) years or more of a combination of classroom training and work experience in required experience, preferred, • Valid Commercial Driver License (CDL) CLASS A,preferred, • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Must be able to obtain CDL within 6 months after hire, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test, • Pass a Ryder Background and Motor vehicle check including drug and alcohol verification from previous employers for the last 3 years Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. Responsibilities • Performs vehicle maintenance and repair duties, • Performs standard vehicle maintenance, • Performs standard component inspections and repairs, • Performs preventive maintenance, • Diagnoses standard mechanical and electronic problems, utilizing diagnostic computer when applicable, • Identifies root cause of basic failures/conditions and perform repairs as required, • Replaces defective components as instructed, • Performs facility maintenance duties, • Interacts with customers/drivers to properly determine nature of complaint once assigned a task, • Utilizes key functions of Shop Management System and electronic documentation available, • Works in accordance with all federal/ provincial and corporate compliance guidelines (i.e., safety, DOT, MOT), • Performs other support duties as required to support operations. These could include but are not limited to Service Island support Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. Posted Date 4 days ago (9/25/2026 5:06 PM) Requisition ID 2026-211805 Location (Posting Location) : State/Province NJ Location (Posting Location) : City SOUTH PLAINFIELD Location (Posting Location) : Postal Code 07080 Category Technicians/Service Employees4 Additional Locations (use this field to indicate if position can be domiciled in several areas) US-NJ-BRIDGEWATER | US-NJ-Bridgewater | US-NJ-BRIDGEWATER | US-NJ-EDISON | US-NJ-EDISON | US-NJ-PERTH AMBOY | US-NJ-NEWARK Employment Type Regular-Full time Travel Requirements 0-10% Position Code 1000120 Min Pay USD $32.00/Hr. Max Pay USD $32.00/Hr.

Position Description Ryder is hiring a Senior Level Diesel Technician in South Plainfield, NJ— providing a stable company for your career with weekly pay and excellent benefits. Hear it from a Ryder Technician Employee Here: https://RyderCareers.Video/T3 • Hourly Pay: $35.00 per hour, • Certification Bonus of $100 for each New ASE Certification Obtained up to $700, • Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year, • Schedule: Monday–Friday Weekends OFF, • Hours: First Shift 6:00 am – 2:30 pm We provide the best State-of-the-Art Diagnostics and Tools to all Ryder Maintenance Repair Mechanics who work on Heavy Duty Vehicles Apply Here with Ryder Today Spots are filling fast — click apply now to secure your spot. Questions? Call Misty or text “South Plainfield” to904-869-3515to speak with your recruiter today. All the benefits you expect — without the wait. • Medical, Dental, Vision after 30 days, • Earn PTO starting Day 1. Up to 80 hours accrued in 1st year, • Yearly merit pay increases, • 401 (k) company match, • PPE, uniforms, and boot allowance, • Paid training that keeps you ahead, • Safety‑first workplace & State-of-the-art equipment, • Top Tech Competition: Earn $250 – $50,000 per year, • U.S. military veterans - extra paid day off, • 15% company stock discount, • Up to $5,000 in Tech tuition repayment, • 12 weeks paid maternity leave (subject to specific eligibility criteria, including work tenure), • Employee discounts on tools, vehicles, travel, tech & more Click Here to See All Ryder Careers:https://www.ryder.com/careers/diesel-technicians At Ryder, you will be recognized and respected for your expertise and skill by joining a community of proud women and men in logistics, including many Military Reservists and Veterans. Ryder provides a clear path for career development and advancement. Share Ryder jobs with people you know-get paid for it. Ryder offers unlimited bonuses up to $1,500 for every hired Diesel Mechanic Technician and Fuel Service Employee. EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools, required, • Demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Basic diagnostics and repairs, including AC and electrical systems, required, • Three (3) years or more relevant work experience, preferred, • All other certification as required by location, required, • Valid Commercial Driver License (CDL) CLASS A,preferred, • All other certification as required by location, required, • ADDITIONAL REQUIREMENTS:, • Must have a minimum of 2 years of experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Knowledge of and the ability to apply knowledge of computer skills: PC, Windows, mouse, etc., • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Must be able to obtain CDL within 6 months after hire, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test, • Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. Responsibilities • Performs vehicle maintenance and repair duties including:, • Performs standard vehicle maintenance, • Performs preventive maintenance, • Diagnoses complex mechanical and electronic problems utilizing diagnostic computer when applicable, • Completes complex and detailed mechanical inspections & repairs with minimal supervision, • Replaces defective components as instructed, • Works unsupervised on most tasks, • Performs facility maintenance duties, • Interacts with customers/drivers to properly determine nature of complaint once assigned a task., • Utilizes key functions of Shop Management System and electronic documentation available., • Works in accordance with all federal/ provincial and corporate compliance guidelines (i.e., safety, DOT, MOT)., • Acts as mentor for Tech 1 and Tech 2 levels., • Demonstrate the ability to access and use internal and external maintenance documents., • Other support duties as required to support operations. These could include but are not limited to Service Island support, • SBTIII trained within 180 days (SBT220), • Complete 2 of the OEM On-Line diagnostic scan tool software courses as required by location fleet mi. (predominant OEM of fleet mix completed within 365days) Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. Posted Date 4 days ago (9/25/2026 5:08 PM) Requisition ID 2026-211806 Location (Posting Location) : State/Province NJ Location (Posting Location) : City SOUTH PLAINFIELD Location (Posting Location) : Postal Code 07080 Category Technicians/Service Employees5 Employment Type Regular-Full time Travel Requirements 0-10% Position Code 1000356 Min Pay USD $35.00/Hr. Max Pay USD $35.00/Hr.

Job DescriptionJob Title: Packaging Technician - 2nd Shift Location: Monmouth Junction, New Jersey Type: Contract to Hire Compensation: $17-$19/Hour +$1.50 shift differential Contractor Work Model: Onsite Hours: Mon-Thu, 3pm - 1am Position Summary We are seeking a Packaging Technician (2nd Shift) to support the packaging of pharmaceutical products in a cGMP-regulated environment. This role involves operating packaging equipment, ensuring compliance with batch records and FDA guidelines, and maintaining accurate documentation. The position offers a contract-to-hire opportunity with growth potential based on performance and business needs. Duties and Responsibilities: • Operate and monitor packaging equipment (fillers, cappers, labelers, cartoners, shrink wrappers, etc.) to ensure efficient production., • Assist with equipment set-up, changeovers, and test runs for various products and batch sizes., • Accurately complete and maintain batch records and other required documentation., • Follow SOPs, cGMPs, FDA standards, and safety procedures at all times., • Collaborate with production staff to meet quality and production goals., • Perform general housekeeping and safety compliance within the packaging area. Qualifications:, • High school diploma or equivalent required., • Previous pharma packaging experience in a manufacturing environment strongly preferred., • Ability to read, interpret, and follow work instructions and safety procedures., • Strong attention to detail and record-keeping skills., • Effective verbal and written communication skills in English., • Ability to lift up to 50 lbs., stand for extended periods, and use Personal Protective Equipment (PPE). System One, and its subsidiaries including Joulé and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. Ref: #562-Joule Staffing - Edison

Job Description Pool Technician – Seasonal Position Overview As a Pool Technician with Millennial Pools, you’ll play an essential role in keeping commercial pool facilities clean, safe, and properly maintained throughout the summer season. Pool Technicians are responsible for servicing approximately 10–15 pool facilities while providing reliable, high-quality service to our clients. This is a hands-on, outdoor position that is ideal for individuals who enjoy working independently, staying active, and working in a fast-paced environment. Responsibilities • Service and oversee the maintenance of 10–15 commercial pool facilities, • Vacuum and clean pool areas, • Test and balance pool chemicals, • Monitor and maintain pumps, filtration systems, and other pool equipment, • Identify and report maintenance or equipment issues, • Maintain accurate service records, • Follow company safety and pool-maintenance procedures, • Provide professional and courteous service at each facility Schedule & Compensation Open Pool Season Memorial Day – Labor Day • 5 days per week, • Full-time seasonal position, • Schedule is mandatory during the open pool season, • $2,000–$5,000 per month, • Commission opportunities available, • Opportunities for additional bonuses and pay increases Closing Season September 3 – October 31 • 3–7 days per week, • Optional seasonal work, • $18/hour What We Offer • Company truck for the summer season, • ⛽ Company fuel card – gas provided, • $2,000–$5,000 monthly earning potential, • Commission opportunities, • Bonus pay and opportunities for pay increases, • Company-provided tools and equipment, • Paid, on-the-job training, • Referral program, • Company events and team activities, • Opportunity for continued growth with a growing company Position Details Job Type: Full-time, Seasonal Summer Compensation: $2,000–$5,000 per month + commission Closing Season Pay: $18/hour Schedule: Day Shift preferred Work Location: On the road / Multiple commercial pool facilities Experience: No prior pool experience required – training provided Who We're Looking For We're looking for dependable, hardworking individuals who take pride in their work and are willing to learn. The ideal candidate is responsible, punctual, comfortable working outdoors, and capable of managing multiple facilities throughout the season. If you're looking for a seasonal position with strong earning potential, company-provided transportation, paid training, commission opportunities, and room to grow, Millennial Pools wants you on our team! Sign up here to RSVP for our free training on a range of days at our office in Williamstown, NJ! https://site.corsizio.com/event/6a96cf7cb4270dc2eb9cd7ea Days currently available for the technician seminar: Sept. 26th Oct. 24th Nov. 21st Dec. 19th

Job Description RSW Auto Group is looking for an experienced technician who takes pride in their work and is committed to continuous improvement. We specialize in European vehicles and handle complex diagnostic and repair work daily. This is not an entry-level position and not a volume-based environment. We are looking for someone who values doing the job right and wants to continue growing in their craft. What We’re Looking For • Strong diagnostic ability with a structured, test-based approach, • Willingness to learn and improve continuously, • Ability to work through complex problems without relying on guesswork, • Pride in your work and attention to detail, • Ownership of your work from start to finishWhat You’ll Be Doing, • Diagnosing and repairing European vehicles, • Performing in-depth testing to identify root cause issues, • Documenting findings clearly for the service team, • Working within a process-driven environment focused on accuracy and efficiency, • Contributing to a team that values quality over shortcutsWhat Sets This Shop Apart, • Fully climate-controlled shop, • Process-driven environment focused on testing, not guessing, • High-level work with modern diagnostic equipment, • Training and tool allowance available, • Team culture built on accountability and respect for the craft, • Quality control systems in place to ensure work is done right, • Unlimited growth potential for technicians who want moreCompensation & Benefits, • Competitive, performance-based compensation with no cap on earning potential, • Health, dental, and vision benefits with employer contribution, • 401(k) plan, • Paid time off, • No nights or weekends If you take pride in your work, enjoy solving complex problems, and want to be part of a shop that operates at a higher standard, apply.

Job Description We are currently seeking an Automobile Technician to become an integral part of our team! You will diagnose, repair, and overhaul automotive vehicles. Responsibilities: • Diagnose and repair automotive vehicles, • Perform routine vehicle tune-ups and maintenance, • Provide labor and time estimates for automotive repairs, • Inspect and test new vehicles for necessary adjustments Qualifications: • Previous experience as an automotive technician, mechanic, or other related fields - 5 years minimum, • Knowledge of diagnostic and repair equipment, • Strong mechanical aptitude and troubleshooting skills, • Deadline and detail-oriented

Job Description Assembly Technician – PCB / SMT Schedule: Monday–Friday, 8:00 AM–6:00 PM, with some flexibility. About the Opportunity A growing electronics manufacturer supporting RF, microwave, defense, aerospace, satellite, radar, and communications applications is seeking an experienced Assembly Technician with strong PCB, SMT, soldering, and electronic assembly skills. Responsibilities • Assemble electronic assemblies, RF modules, subassemblies, and systems from drawings and work instructions., • Perform soldering and rework under a microscope, including SMT components as small as 0402., • Perform PCB modifications such as trace cutting and jumper-wire installation., • Install wire harnesses, cable assemblies, relays, transformers, heatsinks, fans, and related components., • Perform crimping, chassis wiring, mechanical assembly, and precision measurements., • Inspect completed work for quality and compliance with IPC-A-610 or similar standards., • Rework units from Engineering and Test and communicate assembly issues as needed. Requirements • High school diploma or GED., • 3+ years of mechanical/electronic assembly experience., • 2–3+ years of soldering and electronic assembly experience., • Experience with PCB rework, SMT components, cable assemblies, crimping, and harnessing., • Ability to read assembly drawings and identify component polarity/orientation., • Familiarity with IPC-A-610; certification is a plus., • Strong attention to detail, troubleshooting, and communication skills

Job Description Kia Retailers are offering skilled and experienced military Veterans with the opportunity to begin an inspiring career as a Kia Certified Service Technician. To support this Kia Retailer initiative, Kia America, Inc. has established the Kia Veterans Technician Apprenticeship Program (VTAP). Job Description • Diagnose, maintain, and repair Kia vehicles including engine, transmission, steering, suspension, brakes, HVAC, and electrical components, • Complete repair orders and warranty request orders in accordance with established Kia and Retailer policies and procedures, • Test drive vehicles, and analyze, diagnose, and repair components and systems using Kia diagnostic strategies, special equipment, and tools, • Perform services, diagnostics, and repairs in a timely fashion while communicating with the shop foreman and service advisor to promote an optimal customer experience All potential employment opportunities presented and advertised within this site are with independently owned and operated Kia Retailers. Applicants who seek employment through this site are applying for full-time employment with a participating Kia Retailer and not with KUS or ERS. All employment opportunities listed within this site are subject to applicable Federal and State statutes, rules, and regulations governing employment, which apply to each individual Kia Retailer’s specific location. KUS and ERS make no warranties (expressed or implied) or guarantees of employment to any individual seeking to participate in the Kia Veteran Technician Apprenticeship Program (VTAP). All employment decisions are at the discretion of the specific Kia Retailer to which an employment application is made, conditional upon meeting eligibility, skill, and experience requirements to participate in VTAP. Requirements Qualifications • Honorable Discharge, • Valid Drivers License from any state with a clean driving record, • Experience in a technical / mechanical field is required, • Must be willing to complete and pass drug screening and background checks Benefits Kia VTAP Apprenticeship Highlights: • Full-time employment with a participating Kia Retailer, • A program designed specifically for Veterans facilitated by Veterans!, • Participation in a one-year competency-based GI Bill approved apprenticeship leading to Kia Service Technician certification, • Access to all tools, equipment, vehicles, and training needed to complete the apprenticeship and certification process, • Eligible Veterans may apply for and receive a substantial GI Bill© Monthly Housing Allowance (MHA) during their apprenticeship

Job Description Lexus Of Edison - Automotive Technician Edison, NJ Description JOB DESCRIPTION Lexus Of Edison currently seeking an Automotive Technician to become an integral part of our team! You will diagnose, adjust, repair, and overhaul automotive vehicles. We are currently seeking B-Level technicians and will compensate based on your expected flat-rate production. RESPONSIBILITIES • Diagnose and repair automotive vehicles, • Perform routine vehicle tune-ups and maintenance, • Provide labor and time estimates for automotive repairs, • Inspect and test new vehicles for necessary adjustments, • Perform thorough multi-point inspections to identify opportunities for additional maintenance, • Completing repairs and maintenance in a timely fashion. Ensuring that the customer’s vehicle is repaired and maintained both efficiently and seamlessly is a significant aspect of your role, • Completing the pre-delivery service on new vehicles. creating and engaging work environment. Pre-delivery service is the first step in providing exceptional customer care. Delivering a vehicle in perfect condition sets the stage for an exceptional ownership experience and helps build customer loyalty to your dealership., • Delivering an exceptional customer experience. You are expected to treat a customer as you would a guest in your home. This level of service creates a strong and lasting impression on the customer and goes a long way toward creating an exceptional customer experience. BENEFITS • Medical, Dental, and Vision, • 401K Plan with Match, • Paid time off, • Growth opportunities, • Paid Training, • Employee Vehicle Purchase Options, • Individually owned and operated, • Discounts on Products and Services EQUAL OPPORTUNITY We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Requirements QUALIFICATIONS • Deep understanding of automobiles and speedy diagnostic abilities, • Effective analytical and communication skills and eagerness to improve, • Ability to learn new technology, repair and service procedures and specifications, • Ability to operate electronic diagnostic equipment, • High School Diploma or GED (required), • Graduated from a post-secondary Automotive Technology Program., • ASE Master Certification/Technical degree (preferred), • 5+ years of experience as a B-level repair technician in a Lexus or Toyota dealership (strongly preferred)., • Valid driver’s license and clean driving record, • Authorized to work for any U.S. employer

Job DescriptionThe Product Technician 3 is responsible for operating production machinery in accordance with established procedures and guidelines to produce products based on the specifications outline in the Job Book The Product Technician 3 is expected to:· Produce products that meet MICRO’s quality standards and customer specifications consistently Machine Operation 60% · Operates a variety of production equipment and machinery.· Manufacture, test, inspect, package, and label products according to defined procedures and instructions as appropriate. · Uses computer-controlled equipment to select, position and secure automatic or semi-automatic machines.· Verifies material, lubricants, solvents and packaging material are correct.· Produces products that conform to all of the requirements outlined in the job book· Monitors production process during the production run· Performs maintenance activities where applicable· Stops production when product is not in conformance and follows the nonconformance procedure.Product Inspection and Nonconformance Process 40%· Reads and interprets prints located in the job book. Verifies dimensions of finished product visually and/or by using inspection equipment per customer specifications. · Keeps inspection data based on the requirements of the job book.· Completes all necessary documentation.· Uses SPC to verify conformance of products · Identifies production or quality issues and reports it to the appropriate group. This position has no talent management responsibilities. EDUCATION AND EXPERIENCE · High school diploma or general education degree (GED) is preferred.· 0-2 years of experience in a manufacturing environment or equivalent combination of education and experience is preferred LICENSE AND CERTIFICATION· None TECHNICAL SKILLS· SPC· Blueprint OTHER SKILLS· WIP tracking· Multitasking· Personal Accountability· Problem solving· Spatial dexterity· Manual dexterity· Attention to detail· Organizational skills· Basic computer skills Hourly starting rate: $18.65 + 15% differential per hour MICRO offers a comprehensive benefits package to eligible employees, including medical, dental and vision insurance; life and disability insurance; a 401(k)-retirement plan; paid time off; paid holidays; and other company-sponsored benefits. Eligibility and benefit offerings are subject to the terms of the applicable plans and company policies. While performing the duties of this Job, the employee is regularly required to stand; walk; sit; use hands to touch, handle, or feel; reach with hands and arms; and talk and hear. The employee is occasionally required to stoop, kneel, crouch, or crawl. The employee must lift, push, pull, carry and/or move up to 10 pounds constantly, between 10 and 25 pounds frequently, and between 25 and 50 pounds occasionally. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.While performing this Job, the employee is regularly required to demonstrate manual and spatial dexterity sufficient to operate machinery for precision work.While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts and vibration. The employee is frequently exposed to risk of electrical shock and odors, dusts, mists, fumes and/or airborne particles. The employee is occasionally exposed to wet and/or humid conditions. The noise level in the work environment varies from moderate to loud, based on the department/work area.

Job Description The Product Technician 3 is responsible for operating production machinery in accordance with established procedures and guidelines to produce products based on the specifications outline in the Job Book The Product Technician 3 is expected to: · Produce products that meet MICRO’s quality standards and customer specifications consistently Machine Operation 60% · Operates a variety of production equipment and machinery. · Manufacture, test, inspect, package, and label products according to defined procedures and instructions as appropriate. · Uses computer-controlled equipment to select, position and secure automatic or semi-automatic machines. · Verifies material, lubricants, solvents and packaging material are correct. · Produces products that conform to all of the requirements outlined in the job book · Monitors production process during the production run · Performs maintenance activities where applicable · Stops production when product is not in conformance and follows the nonconformance procedure. Product Inspection and Nonconformance Process 40% · Reads and interprets prints located in the job book. Verifies dimensions of finished product visually and/or by using inspection equipment per customer specifications. · Keeps inspection data based on the requirements of the job book. · Completes all necessary documentation. · Uses SPC to verify conformance of products · Identifies production or quality issues and reports it to the appropriate group. This position has no talent management responsibilities. EDUCATION AND EXPERIENCE · High school diploma or general education degree (GED) is preferred. · 0-2 years of experience in a manufacturing environment or equivalent combination of education and experience is preferred LICENSE AND CERTIFICATION · None TECHNICAL SKILLS · SPC · Blueprint OTHER SKILLS · WIP tracking · Multitasking · Personal Accountability · Problem solving · Spatial dexterity · Manual dexterity · Attention to detail · Organizational skills · Basic computer skills Hourly starting rate: $18.65 + 5% differential per hour MICRO offers a comprehensive benefits package to eligible employees, including medical, dental and vision insurance; life and disability insurance; a 401(k)-retirement plan; paid time off; paid holidays; and other company-sponsored benefits. Eligibility and benefit offerings are subject to the terms of the applicable plans and company policies. While performing the duties of this Job, the employee is regularly required to stand; walk; sit; use hands to touch, handle, or feel; reach with hands and arms; and talk and hear. The employee is occasionally required to stoop, kneel, crouch, or crawl. The employee must lift, push, pull, carry and/or move up to 10 pounds constantly, between 10 and 25 pounds frequently, and between 25 and 50 pounds occasionally. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. While performing this Job, the employee is regularly required to demonstrate manual and spatial dexterity sufficient to operate machinery for precision work. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts and vibration. The employee is frequently exposed to risk of electrical shock and odors, dusts, mists, fumes and/or airborne particles. The employee is occasionally exposed to wet and/or humid conditions. The noise level in the work environment varies from moderate to loud, based on the department/work area.

Job DescriptionCOMPANY AND CULTURE DESCRIPTION: At BASS ABA, We provide state-of-the-art ABA home, school, and community based services and focus on goals that encompass the full range of a child’s emerging skills to foster independence and learning. Our philosophy on education and behavior management encompasses a primary and main focus on the individual regardless of his or her age or diagnosis. We are a team driven by the belief that every child is entitled to a kind, fun, and positive approach to learning. ROLE DESCRIPTION: BASS ABA is looking to hire Behavior Technicians in your area. A Behavior Technician is a patient-centered professional with experience promoting patient achievement of greater independence in-home, at school, and within the community. Effectively aligns goal development and implementation strategies to promote company objectives and ensure exceptional progress related to established care plans. RESPONSIBILITIES: • Work one-on-one with the learner in their home and/or community to deliver DTT (Discrete Trial Training) and NET (Naturalistic Environment Training) on measurable goals set by the FBA (Functional Behavior Assessment)., • Implement behavior reduction procedures specified in the Behavior Intervention Plan., • Take accurate and reliable data during each session utilizing the electronic data collection system., • Submit monthly documents/time logs and attend staff meetings., • Attend mandatory and ongoing training., • Wiling to take the RBT coursework and sit for the test within 3 months of start.QUALIFICATIONS:, • 32 credits in college education, • Minimum 6 months of experience working directly with individuals with ASD/Developmental delays., • RBT Credentials is a plus., • CentralReach Experience is a plus., • Excellent communication and organizational skills, professionalism, and a commitment to upholding the company’s mission statement., • Must meet all program basic competencies within 90 days of employment.PERKS/BENEFITS:, • Flexible schedule, • Paid sick leave, • Mileage reinbusement, • Retirement account with up to 3% company match

Fire Sprinkler Technician- $5,000 Sign-on Bonus \n \n THE POSITION IN A NUTSHELL \n Sciens Building Solutions is seeking an experienced Fire Sprinkler Service Tech to provide service on all types of fire sprinkler systems and components. This is a key position for our growing team and requires attention to detail in all aspects of NFPA-based fire sprinkler systems. The ability to solve problems and communicate effectively with customers, Sciens leadership, coordinators, and other team members is an integral part of this position. \n \n WHAT YOU’LL BE DOING (and doing well!) \n\n • Conduct inspections of wet, dry, pre-action, fire pumps, and standpipes.\n, • Perform preventative maintenance and repair and/or replace faulty components like sprinkler heads, pipes, and valves, including fabrication of pipe when necessary\n, • Diagnose problems with systems and implement necessary fixes to ensure proper functioning.\n, • Test and verify system functionality after repairs or modifications to ensure compliance with NFPA standards and local codes.\n, • Complete detailed reports on tests, inspections, service work, and any issues found.\n, • Ensure all documentation, tags, and inspections reports meet local AHJ and customer requirements.\n, • Communicate with customers professionally to minimize disruptions, provide updates, and address concerns.\n, • Order replacement parts and materials as needed, ensuring timely completion of work.\n, • Maintain company equipment and keep company vehicle and its inventory stocked and in good condition.\n, • Respond to emergency service calls and after-hours requests on a rotating “on-call” schedule.\n, • Stay current with updates to NFPA and local codes, product technologies, and company service standards through ongoing training.\n, • Comply with industry standard procedures and Sciens safety programs/policies.\n\n \n WHAT WE LIKE ABOUT YOU \n\n • High school diploma or equivalent.\n, • Two years of experience in the Fire and Life Safety industry.\n, • Enrolled in and actively going through Sprinkler Apprentice Program.\n, • Working knowledge of wet, dry, and pre-action systems, as well as backflows and fire pumps.\n, • Strong understanding of all sprinkler system components and how they work.\n, • Experience with installation of underground piping preferred but not required.\n, • Intermediate understanding of NFPA 13 code requirements.\n, • Ability to read and install from fire system design drawings and documentation, including system zoning.\n, • Ability to use trade appropriate tools to perform daily pipe fitting duties efficiently and safely.\n, • Ability to train others to use trade appropriate tools efficiently and safely.\n, • Ability to work under tight deadlines and with a sense of urgency.\n, • Ability to work independently with some supervision.\n, • Certified in backflow inspection and repair preferred.\n, • Actively pursuing state required certifications.\n, • Job or site-specific equipment certifications as determined by the business.\n, • Product specific certifications as determined by the business.\n, • Ability to work under tight deadlines and with a sense of urgency.\n, • Ability to work independently with some supervision.\n, • Knowledge of OSHA safety standards and able to obtain OSHA 10 Certification.\n, • Customer-focused; skilled in project and people management.\n, • Good organizational, decision-making, and communication skills\n, • Be physically fit to perform the demanding work of the trade, including frequent lifting of up to 25 pounds, maximum occasional lifting up to 50 pounds; able to work from heights and climb ladders; standing and walking for most of the workday.\n, • Ability to travel occasionally overnight, as needed.\n, • Valid driver’s license & reliable transportation.\n\n \n WHAT WE’RE BRINGING TO THE TABLE \n\n • Competitive salary based on qualifications.\n, • Sign-on Bonus - $5,000\n, • Paid time off plan and holidays.\n, • 401(k) matching.\n, • Short term and long-term disability.\n, • Medical, dental, and vision plans with options.\n, • Life insurance.\n, • Company cell phone, laptop, and vehicle.\n, • Professional career development opportunities.\n, • Tuition reimbursement.\n

Client Overview Our client is a growing consumer products organization dedicated to developing innovative personal care and beauty products. The company is committed to product innovation, quality, and delivering exceptional experiences to consumers through science-driven solutions. They are currently looking to add a Quality Control Technician (Personal Care) to their team.\n \n Salary/Hourly Rate $25/hr - $28/hr\n \n Position Overview The Quality Control Technician (Personal Care) will support product quality initiatives and ensure compliance with established specifications. This role will be responsible for conducting routine quality testing, product inspections, documentation, and quality system support activities. The ideal candidate is detail-oriented, highly organized, and eager to contribute within a collaborative team environment.\n \n Responsibilities Of The Quality Control Technician (Personal Care) \n\n • Assess color, odor, appearance, and organoleptic qualities to ensure product consistency.\n, • Perform quality inspections on raw materials, finished goods, and retained samples to ensure adherence to product specifications.\n, • Perform viscosity and pH measurements, density, DSC, melting point, drop test, graph test, fluidity, total solids, and water bath analysis to verify formulation integrity.\n, • Create, maintain, and distribute quality documentation, reports, and forms.\n, • Support quality management system (QMS) activities and quality qualification processes. \nRequired Experience/Skills For The Quality Control Technician (Personal Care) \n\n • Minimum of 1 year of experience, preferably in the beauty or consumer packaged goods (CPG) industry.\n, • Experience performing physical and analytical testing on products or materials.\n, • Strong attention to detail and ability to maintain accurate documentation.\n, • Proficiency in Microsoft Excel and other standard business software.\n, • Strong organizational, written, and verbal communication skills.\n, • Ability to work independently while contributing effectively within a small team environment.\n, • Demonstrated willingness to learn new processes and take on additional responsibilities. \nPreferred Experience/Skills For The Quality Control Technician (Personal Care) \n\n • Experience within the personal care, cosmetics, beauty, consumer packaged goods (CPG), chemical, or related manufacturing industries.\n, • Familiarity with Quality Management Systems (QMS).\n, • Experience supporting product inspections, product releases, and sample management activities.\n, • Understanding of laboratory testing methods related to formulation and product quality evaluation. \nEducation Requirements \n\n • Bachelor's degree in Chemistry, Biology, Cosmetic Science, Chemical Engineering, Food Science, or another related scientific discipline is required. \nBenefits \n\n • Atrium Care Package available, upon eligibility (including healthcare plans, discount programs, and paid time off). \n

The Phlebotomist III- Float represents the face of our company to patients who come to Quest Diagnostics, both as part of their health routine or for insights into life-defining health decisions. The Phlebotomist III- Float draws quality blood samples from patients and prepares those specimens for lab testing while following established practices and procedures. The Phlebotomist III- Float has direct contact with patients and creates an atmosphere of trust and confidence while explaining procedures to patients and drawing blood specimens in a skillful, safe and accurate manner. The Phlebotomist III- Float is responsible in providing coverage at multiple locations for multiple roles. The Phlebotomist III- Float must ensure that daily activities of the Patient Service Center/Mobile/Long Term Care/In-Office Phlebotomy are completed accurately and on time. The Phlebotomist III- Float demonstrates Leadership Behaviors while focusing on process excellence skills and sensitivity to confidentiality and accuracy to patient information. Successful applicants may be assigned to work and direct daily activity in a doctor's office, a patient service center, in a house call environment, long term care or as business needs dictate. Must be able to step in for a Phlebotomist III- Float and lead one or more PSR on site. Will be required to act as a coach, mentor, instructor, resource advisor for new employees and provide effective onboarding services to new clients. They will also act as point of contact to staff on site and provide regular input to the group lead or supervisor. The Phlebotomist III- Float may also focus on working with customers who have a high complexity and/or volume practice with a specialized focus requiring outstanding phlebotomy skills. In addition, these practices require a higher level of customer facing skills including verbal and written communications, problem solving, and collaboration with multiple functions, such as: Sales, Laboratory Testing Services, IT connectivity, Billing, and Logistics due to their specialty and or complex test orders. The Phlebotomist III- Float must be capable of handling multiple priorities in a high-volume setting. Required Education: 1. High school diploma or equivalent. 2. Medical training: medical assistant or paramedic training preferred. 3. Phlebotomy certification preferred. Required in California, Nevada, and Washington. Work Experience: 1. Five years phlebotomy experience required, inclusive of pediatric, geriatric and capillary collections. 2. Minimum 3 years in a PSC/IOP environment preferred. 3. Customer service in a retail or service environment preferred. 4. Keyboard/data entry experience. Phlebotomist, Phlebotomy, Phlebotomist Technician, Phlebotomy Technician, Mobile Phlebotomist, Medical Assistant, Technician, Certified Phlebotomy Technician At TalentBurst, we deliver more than talent, we deliver outcomes. We partner with you to move quickly and connect you to opportunities aligned with your skills and long term growth. Backed by precision, transparency, and results, we connect top talent with leading organizations through trusted partnerships. We offer competitive compensation and comprehensive benefits, including medical, dental, vision, and retirement options. TalentBurst is an equal opportunity employer committed to an inclusive and diverse workforce.

Work in the Fire Protection industry as a Senior Fire Sprinkler Technician in Central Jersey: We are seeking an experienced and dependable Field Sprinkler Project Specialist to join our team. This position is ideal for a skilled Fire Sprinkler Technician who thrives in the field and has the ability to work closely with Project Managers to ensure successful execution of commercial and industrial sprinkler system projects. The Field Sprinkler Project Specialist will be responsible for overseeing the on-site installation and maintenance of fire sprinkler systems, coordinating day-to-day field activities with the Project Manager, and ensuring work is completed in accordance with plans, codes, and safety standards. This is a hands-on field role requiring a high level of technical expertise, communication, and organizational skills. On-site technician for Fire Sprinkler projects. Coordinate with Project Managers on each jobsite. Inspect, test, and service sprinkler systems in accordance with applicable fire codes. Must have hands-on experience with field tools and equipment used in fire sprinkler installation and maintenance-including mechanical, electrical, and pneumatic systems-and must adhere to all applicable job site safety protocols and procedures. Process all service paperwork timely and accurately. Able to update and maintain information and processes in the company software system (Profit Zoom). Capable of handling on call (after-hours) emergency services work and regular hour emergency service jobs. Required Qualifications: Prior experience, minimum 2 years, in Water-Based Systems Layout, with demonstrated experience in field installation and coordination on commercial or industrial sprinkler projects. Strong written and verbal communication skills. Ability to be proactive in communicating and working with other departments. Valid driver's license and excellent driving record. Must pass a background check and pre-employment drug screen. Must be willing to travel throughout NJ as required to project field locations. Excellent customer service skills. Must be competent with all work-related power tools. Excellent work ethic. Comply with unform policy. Language: English Preferred Qualifications: Strong understanding of NFPA 13 and related codes. Ability to read and interpret construction documents and sprinkler system plans. Experience coordinating with project managers, inspectors, and other trades on active job sites. OSHA 30 Certification or equivalent safety training. Ability to work in a team or on their own.

Job Description The Product Technician 3 is responsible for operating production machinery in accordance with established procedures and guidelines to produce products based on the specifications outline in the Job Book The Product Technician 3 is expected to: · Produce products that meet MICRO’s quality standards and customer specifications consistently Machine Operation 60% · Operates a variety of production equipment and machinery. · Manufacture, test, inspect, package, and label products according to defined procedures and instructions as appropriate. · Uses computer-controlled equipment to select, position and secure automatic or semi-automatic machines. · Verifies material, lubricants, solvents and packaging material are correct. · Produces products that conform to all of the requirements outlined in the job book · Monitors production process during the production run · Performs maintenance activities where applicable · Stops production when product is not in conformance and follows the nonconformance procedure. Product Inspection and Nonconformance Process 40% · Reads and interprets prints located in the job book. Verifies dimensions of finished product visually and/or by using inspection equipment per customer specifications. · Keeps inspection data based on the requirements of the job book. · Completes all necessary documentation. · Uses SPC to verify conformance of products · Identifies production or quality issues and reports it to the appropriate group. This position has no talent management responsibilities. EDUCATION AND EXPERIENCE · High school diploma or general education degree (GED) is preferred. · 0-2 years of experience in a manufacturing environment or equivalent combination of education and experience is preferred LICENSE AND CERTIFICATION · None TECHNICAL SKILLS · SPC · Blueprint OTHER SKILLS · WIP tracking · Multitasking · Personal Accountability · Problem solving · Spatial dexterity · Manual dexterity · Attention to detail · Organizational skills · Basic computer skills While performing the duties of this Job, the employee is regularly required to stand; walk; sit; use hands to touch, handle, or feel; reach with hands and arms; and talk and hear. The employee is occasionally required to stoop, kneel, crouch, or crawl. The employee must lift, push, pull, carry and/or move up to 10 pounds constantly, between 10 and 25 pounds frequently, and between 25 and 50 pounds occasionally. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. While performing this Job, the employee is regularly required to demonstrate manual and spatial dexterity sufficient to operate machinery for precision work. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts and vibration. The employee is frequently exposed to risk of electrical shock and odors, dusts, mists, fumes and/or airborne particles. The employee is occasionally exposed to wet and/or humid conditions. The noise level in the work environment varies from moderate to loud, based on the department/work area.

Job Description The Quality Assurance Technician I is responsible to test and ensure that goods meet manufacturing standards and are free of defects. Tests and inspects products at various stages of production process and compiles and evaluates statistical data to determine and maintain quality and reliability of products. The Quality Assurance Technician is expected to: • Maintain SPC limit at or above the corporate target. · Complete in process inspections in 2 hours or less · Complete raw material in coming inspections in 25 days or less · Performs in process inspections. · Performs raw material incoming inspection and movements through ERP system. · Assists with First Piece / First Article, incoming processed material, and final inspections. · Assists in engineering capability studies. · Assists in gage repeatability and reproducibility studies. · Records test data, applying statistical quality control procedures. · Completes incoming inspection documentation • Provides communication to Calibration Technicians of any additions, deletions, or changes to the process gages and equipment · Manages storage of samples and records. · Interprets engineering drawings, schematic diagrams, and / or work instructions. This position has no talent management responsibilities. EDUCATION AND EXPERIENCE · High school diploma or general education degree (GED) is required. · 1-2 years of quality experience or equivalent combination of education and experience is required. · Previous experience working in a manufacturing environment is strongly preferred. LICENSE AND CERTIFICATION · None TECHNICAL SKILLS · Automated Inspection Equipment · ERP software · MS Office Suite OTHER SKILLS · SPC · Manual dexterity · Spatial dexterity · Verbal communication · Written communication · Organizational skills · Interpersonal skills · Multitasking While performing the duties of this Job, the employee is regularly required to stand; walk; sit; use hands to touch, handle, or feel; reach with hands and arms; and talk and hear. The employee is occasionally required to stoop, kneel, crouch, or crawl. The employee must frequently lift, push, pull, carry and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. While performing this Job, the employee is regularly required to demonstrate manual and spatial dexterity sufficient to operate machinery for precision work While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts and vibration. The employee is frequently exposed to risk of electrical shock. The employee is occasionally exposed to wet and/or humid conditions and odors, dusts, mists, fumes and/or airborne particles. The noise level in the work environment is usually moderate.

Job DescriptionJob Title: Electro-Mechanical Maintenance TechnicianJob Description We are seeking a skilled Electro-Mechanical Maintenance Technician with over 5 years of experience in industrial maintenance or electro-mechanics. The ideal candidate will possess strong knowledge of PLCs, VFDs, and industrial controls, with the ability to work independently and troubleshoot under pressure. Experience in a food manufacturing environment is preferred, along with familiarity with CMMS systems and Microsoft Office. A willingness to work overtime, weekends, and holidays is required. Responsibilities • Troubleshoot and repair processing and packaging equipment., • Perform routine preventive maintenance and maintain proper documentation., • Read and interpret electrical schematics and wiring diagrams., • Troubleshoot and repair control panels, motors, and power distribution systems., • Work with conveyors, gearboxes, pumps, and automated packaging equipment., • Perform mechanical alignments, bearing replacements, and belt tensioning., • Calibrate temperature sensors, flow meters, and pressure gauges., • Use diagnostic tools such as multimeters and oscilloscopes., • Follow SOPs and maintain clean, safe workspaces., • Ensure compliance with GMP, HACCP, and OSHA standards., • Understand food safety protocols and hygiene standards.Essential Skills, • Strong knowledge of PLCs, VFDs, and industrial controls., • Ability to read and interpret electrical schematics and wiring diagrams., • Experience with industrial sensors and troubleshooting., • Proficiency in working with mechanical systems like conveyors and pumps., • Understanding of hydraulic and pneumatic systems., • Knowledge of GMP, HACCP, and OSHA standards., • Ability to follow SOPs and maintain clean, safe workspaces.Additional Skills & Qualifications, • Associates degree or technical certification in electromechanical technology, electrical engineering, or industrial maintenance., • High school diploma with extensive hands-on experience may be accepted., • 35 years of experience in manufacturing or food production environment., • Prior work with automated or robotic systems is a major plus., • Familiarity with CMMS systems like MP2 or SAP.Why Work Here? Enjoy a competitive hourly rate with a sign-on bonus, along with comprehensive benefits including Medical, Dental, Vision, Life Insurance, and 401(k). We offer paid time off and career development opportunities in a fast-paced, team-oriented environment with global impact. Work Environment The work schedule is from 7am to 3pm, with a requirement to lift 50+ lbs, stand for long periods, and work in varying temperature conditions. Strong problem-solving and communication skills are essential, as is the flexibility to work overnight shifts, weekends, and respond to emergency calls. A team-oriented mindset is crucial to support cross-functional tasks. Job Type & Location This is a Contract to Hire position based out of New Brunswick, NJ. Pay and Benefits The pay range for this position is $36.00 - $39.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in New Brunswick,NJ. Application Deadline This position is anticipated to close on Oct 12, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description At PEARCE, we've got a career for you! Pearce is a leading technology-enabled provider of asset management solutions for mission-critical electromechanical infrastructure throughout North America. Pearce provides technical maintenance, repair, operations, and engineering services for uninterruptible power supply (UPS) systems, backup power generators, battery energy storage systems (BESS), critical cooling systems, and other electrical and mechanical infrastructure across end markets such as renewable energy, telecom, and data centers. Founded in 1998, Pearce has more than 4,000 employees and 28 locations across the U.S. Pearce is a wholly owned subsidiary of CBRE Group, Inc., the world's largest commercial real estate services and investment firm. To learn more about Pearce visit http://www.pearce-services.com. Pearce from CBRE is seeking an Experienced Critical Power Field Technician (UPS Field Service Engineer) to support customers throughout Newark, NJ, and the surrounding region. This position provides preventive maintenance, emergency service, commissioning support, and battery services on UPS systems, DC power systems, battery plants, PDUs, and static transfer switches in mission-critical environments including data centers, telecommunications facilities, healthcare facilities, and industrial sites. Success in this role requires strong electrical troubleshooting skills, sound technical judgment, and the ability to work independently while delivering exceptional customer service. You will be expected to safely diagnose complex power system issues, restore equipment to operational status, and build long-term customer confidence through professionalism and technical expertise. Core Responsibilities: • Perform preventive maintenance, inspections, testing, troubleshooting, and repairs on UPS systems, battery plants, DC power systems, PDUs, STS units, inverters, and related critical power equipment., • Diagnose electrical and control system faults using schematics, test equipment, manufacturer documentation, and industry best practices., • Install, commission, and replace UPS systems, battery strings, battery monitoring systems, maintenance bypass equipment, and associated power infrastructure., • Respond to emergency service calls and restore customer systems to operational status while maintaining the highest safety and quality standards., • Perform battery testing, capacity testing, failure analysis, and lifecycle replacement services., • Complete service reports, maintenance documentation, and customer communications accurately and professionally., • Develop strong customer relationships through technical expertise, responsiveness, and exceptional service delivery., • Mentor junior technicians and support field training efforts by sharing troubleshooting techniques, safety practices, and technical knowledge., • Maintain compliance with OSHA, NFPA 70E, company safety procedures, and customer site requirements., • Support additional field service activities as business and customer needs evolve. Core Experience: • Minimum 3+ years of hands-on experience servicing UPS systems, battery systems, DC power equipment, generators, switchgear, data center infrastructure, or other mission-critical electrical infrastructure., • Experience supporting equipment from manufacturers such as Eaton, Vertiv/Liebert, Schneider Electric/APC, Mitsubishi, Toshiba, ABB, or comparable critical power platforms is strongly preferred., • Strong understanding of AC and DC electrical theory, power distribution systems, and battery technologies., • Ability to read and interpret electrical schematics, wiring diagrams, and technical documentation., • Experience using multimeters, power quality analyzers, battery testing equipment, and other diagnostic tools., • Demonstrated ability to independently troubleshoot and resolve complex electrical and electronic system failures., • Strong customer-facing communication skills with the ability to explain technical findings, recommendations, and corrective actions to both technical and non-technical stakeholders., • Proven commitment to safety, quality workmanship, and professional accountability., • Valid driver's license and willingness to travel within the assigned service territory, including occasional overnight travel as required., • Military veterans with backgrounds in electronics, avionics, communications, radar, power generation, electrical maintenance, nuclear power, or related technical specialties are highly encouraged to apply. Physical/Work Environment: At Pearce, safety is our highest priority. All employees are expected to comply with OSHA, DOT, NFPA 70E, customer site requirements, and company safety policies at all times. • Valid driver's license with an acceptable driving record and the ability to meet company vehicle requirements., • Ability to pass all required pre-employment screenings, including a drug screening and background check, where applicable., • Ability to lift, carry, push, and/or move equipment and materials weighing up to 100 pounds with or without assistance., • Ability to frequently stand, walk, bend, kneel, crouch, reach overhead, and work in confined or restricted-access areas., • Ability to work safely around energized electrical equipment and within mission-critical customer environments., • Ability to perform physically demanding work for extended periods while maintaining attention to detail and safety awareness., • Ability to manage multiple priorities in fast-paced field environments while maintaining the highest standards of safety and quality., • Willingness and ability to travel throughout the assigned service territory, including overnight and multi-day travel as business needs require. Per diem is provided for qualifying travel., • Willingness to participate in an on-call rotation and respond to customer emergencies when required., • Ability to obtain and maintain Security Clearance Access to customer facilities, including data centers, telecommunications sites, healthcare facilities, industrial locations, and government installations. At Pearce, we are committed to fair and transparent pay practices. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and location. In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range $35—$50 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. We are an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate based on race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. Learn more about us at www.Pearce-Services.com!

Job DescriptionCompany Description Eurofins Scientific is an international life sciences company, providing a unique range of analytical testing services to clients across multiple industries, to make life and our environment safer, healthier and more sustainable. From the food you eat, to the water you drink, to the medicines you rely on, Eurofins laboratories work with the biggest companies in the world to ensure the products they supply are safe, their ingredients are authentic and labelling is accurate. The Eurofins network of companies is the global leader in food, environment, pharmaceutical and cosmetic product testing and in agroscience Contract Research Organization services. It is one of the market leaders in certain testing and laboratory services for genomics, discovery pharmacology, forensics, advanced material sciences and in the support of clinical studies, as well as having an emerging global presence in Contract Development and Manufacturing Organizations. It also has a rapidly developing presence in highly specialized and molecular clinical diagnostic testing and in-vitro diagnostic products. In over 30 years, Eurofins has grown from one laboratory in Nantes, France to 58,000 staff across a decentralized and entrepreneurial network of 900 laboratories in over 54 countries. Eurofins companies offer a portfolio of over 200,000 analytical methods to evaluate the safety, identity, composition, authenticity, origin, traceability and purity of biological substances and products. 2025, Eurofins generated total revenues of EUR € 7.296 billion, and has been among the best performing stocks in Europe over the past 20 years. Job Description The Senior FSE is considered a subject matter expert in the field of Calibrations, Preventative Maintenance and Repairs and the technical authority for the calibration and certification of clean rooms, biosafety cabinets and other controlled environments. They are expected to be CETA certified, write protocols, methods and SOP’s within their field of expertise, train and direct calibrations, qualifications, and certifications, and review and approve certification work carried out by other field service personnel. The role holds the professional credential on which the business's certification registration depends. The business will operate initially under CETA registration, and the role is accountable for building the operating record, testing hours and customer endorsements required to obtain NEBB Cleanroom Performance Testing firm certification, and for holding the NEBB certification personally on the firm's behalf. Certification Delivery • Perform and authenticate certification and requalification of cleanrooms and controlled environments, including:, • Airflow velocity and volume testing, unidirectional and non-unidirectional, • HEPA and ULPA filter installation leak testing by aerosol photometer or discrete particle counter scanning, • Room pressurization and pressure cascade verification, • Airflow visualization studies, including recording and interpretation, • Recovery testing and containment leak testing, • Non-viable airborne particle counting and ISO classification, including sample location determination, • Biosafety cabinet and fume hood certification to NSF/ANSI 49, • Isolator, RABS and glovebox testing, including glove integrity, • Author test methods, certification protocols and standard operating procedures for the service line, and maintain them through revision., • Review and approve certification reports produced by other engineers and technicians., • Investigate out-of-specification results and support customer deviation and corrective action processes, • Train and direct field service personnel carrying out clean room certifications, including technicians outside of the direct reporting line., • Establish and maintain the business's CETA registration, and deliver all certification work to CETA standards from appointment., • Build the record required for NEBB CPT firm certification — continuous operating history, annual cleanroom testing hours, instrument ownership, local chapter membership and endorsement letters — and manage the application., • Obtain NEBB CPT certification personally, completing the Technician examinations and subsequently the Certified Professional examinations, so that the business can authenticate NEBB Certified Reports., • Maintain relationships with customers and awarding authorities who may provide endorsement in support of firm certification., • Support the evaluation and, if pursued, the technical scope of ISO 17025 accreditation for physical certification. Team • Establish the training and qualification pathway for certification engineers and technicians within and outside the direct reporting line., • Train, mentor and assess engineers and technicians toward CETA and NEBB certification, and sign their competency records. Instruments • Specify, commission and maintain the certification instrument set, including particle counters, aerosol photometers and generators, balometers and flow hoods, thermal and vane anemometers, and micromanometers. Assist in the calibration of similar equipment used by other Eurofins businesses., • Perform troubleshooting, preventative maintenance and repair both in the field and in the lab of various types of laboratory equipment including balances, pH meters, environmental monitoring equipment, hoods, biosafety cabinets, room HEPA filters, plate readers and chambers., • Manage personal parts inventory effectively., • Provide feedback to Director regarding any issue impacting service delivery, particularly issues impacting turnaround times. Commercial and administrative • Provide the technical basis for quotations, including room counts, classification, test scope and frequency., • Represent the business technically to customers during scoping discussions and audits., • Complete administrative paperwork and reports promptly and accurately., • Follow good documentation practices (GDP) as applicable to daily activities., • Contact customers on time and schedule service efficiently., • Adhere to environmental health and safety guidelines., • Effectively communicate with clients and other internal and external parties., • Follow Eurofins work policies and all applicable SOPs. Ensure that training on both remains current., • Maintain client confidentiality, specifically if information about the customer is obtained from sources other than the customer (e.g. complainant, assessors)., • Act impartially within the management system., • Perform other tasks as assigned by Management. Qualifications Requirements • Four-year degree in a related field (e.g., chemistry, analytical chemistry, electronic engineering, or similar) plus 7-10 years’ experience in a related field, preferably as a Field Service Engineer., • SME on providing field service support for clean room certifications, hoods, biosafety cabinets, HEPA filters and other controlled environments., • CETA certification held and in good standing, obtained or renewed within the past five years — CNBT, RCP-CT, or equivalent CETA credential appropriate to the scope of work., • NEBB Cleanroom Performance Testing certification is an advantage, at either Certified Professional or Certified Technician level, held and in good standing. AABC certification will also be considered., • Clear, respectful, and timely verbal and written communication. Proven ability to author protocols, methods, qualification/validation documents and SOP’s., • Experience representing a certification firm during customer quality audits, state board of pharmacy inspections or FDA inspections is preferred., • Demonstrable knowledge of ISO 14644 Parts 1, 2 and 3, and ISO 14644-7 where isolators, RABS and gloveboxes are within scope., • NSF/ANSI 49 for biosafety cabinet and hood calibrations and certifications, • USP <797> and USP <800>, including state board of pharmacy certification and recertification requirements. Where this knowledge is not already held, it must be acquired within the first six months., • Physical ability to lift and transport equipment and perform tasks in various lab environments, • Experience with technical troubleshooting and problem solving, • Must be self-motivated and proactive, • Valid drivers license, • Clean driving record, • Ability to travel within customer territory up to 5 days per week Monday-Friday. Overnight travel as needed. Additional Information Position is full-time, Monday through Friday, 8am-5pm with overtime as needed. Candidates currently living within a commutable distance of North Brunswick, NJ are encouraged to apply. Pay range: $100,000 - $130,000 annually depending on related experience and qualification. Excellent full time benefits including • Comprehensive medical coverage, dental, and vision options, • Life and disability insurance, • 401(k) with company match, • Paid vacation and holidays Eurofins USA BioPharma Services is a Disabled and Veteran Equal Employment Opportunity employer.

Job DescriptionJob Overview Binsky Home Service is seeking an experienced Residential Sewer & Underground Pipe Technician / Equipment Operator to join our growing sewer and underground services team. This is a hands-on residential service position focused on sewer lateral repair and replacement, trenchless pipe bursting, water service replacement, spot repairs, exterior excavation, and interior excavation and underground piping repairs. The ideal candidate has significant experience with residential underground plumbing and excavation and is comfortable taking ownership of a job from initial excavation and setup through pipe installation, testing, backfilling, cleanup, and restoration preparation. This is not simply an equipment operator position. We are looking for someone who understands underground sewer and water systems, knows how to safely expose and repair piping, can operate excavation equipment in residential environments, and can work efficiently while protecting the customer's home and property. Key Responsibilities Residential Sewer Repair & Replacement • Perform residential sewer lateral repairs and complete sewer line replacements., • Excavate, expose, remove, repair, and replace damaged underground sewer piping., • Complete sewer spot repairs for collapsed, broken, offset, root-damaged, or deteriorated piping., • Install PVC and other approved sewer piping while maintaining proper pitch, alignment, bedding, and connections., • Make connections to existing residential sewer systems and municipal sewer laterals as required., • Verify proper operation, flow, and installation before backfilling. Trenchless Pipe Bursting, • Perform trenchless sewer replacements using pipe-bursting equipment and techniques., • Properly establish launch and receiving pits., • Set up and operate pipe-bursting equipment, pulling equipment, cables, rods, and related tooling., • Assist with determining whether a sewer replacement is appropriate for traditional excavation or trenchless pipe bursting., • Safely complete pipe-bursting replacements while minimizing disruption to landscaping, driveways, sidewalks, and customer property. Water Service Repair & Replacement, • Excavate and replace residential underground water service lines., • Perform water service spot repairs and full replacements., • Make proper connections at the home and utility/service connection., • Understand appropriate materials, sizing, burial depths, bedding, and installation requirements., • Pressure-test and verify completed water service installations before backfilling. Interior Excavation & Underground Plumbing, • Perform interior excavation work in basements, crawlspaces, garages, and other finished or unfinished areas., • Safely saw-cut and remove concrete slabs as required., • Excavate beneath slabs to expose underground sanitary piping., • Repair or replace underground sewer and drain piping inside residential structures., • Properly backfill and prepare excavated areas for concrete or other restoration., • Establish dust and debris containment and protect customer belongings and finished surfaces throughout the project. Equipment Operation & Excavation, • Safely operate equipment including:, • Mini excavators, • Backhoes, • Skid steers, • Trenchers, • Concrete saws and jackhammers, • Compaction equipment, • Pipe-bursting equipment, • Pumps and dewatering equipment, • Pipe cutting and installation tools, • Excavate around homes, foundations, utilities, landscaping, sidewalks, driveways, and other structures with precision., • Perform hand digging when working near marked or exposed utilities., • Properly bed installed piping and complete backfilling and compaction., • Maintain equipment and immediately report mechanical or safety concerns. Underground Utility & Jobsite Safety, • Review utility mark-outs before excavation begins., • Understand and work safely around existing gas, electric, water, sewer, communication, and other underground utilities., • Follow all applicable OSHA excavation and trench safety requirements., • Properly utilize trench protection, shoring, shielding, sloping, or other protective systems when required., • Maintain safe access and egress from excavations., • Establish appropriate barricades and maintain a safe work area around customers, pedestrians, vehicles, and crew members., • Immediately stop work and notify management when unexpected underground utilities or unsafe conditions are encountered. Residential Property Protection Because this position operates primarily in residential environments, attention to the customer's property is critical. The technician/operator will:, • Protect lawns, landscaping, driveways, sidewalks, patios, finished floors, walls, and customer belongings., • Plan equipment access before beginning excavation., • Minimize unnecessary property disturbance whenever possible., • Maintain a clean and organized jobsite throughout the project., • Communicate with the homeowner regarding areas being accessed or excavated., • Leave the property clean, safe, and properly prepared for final restoration. Troubleshooting & Field Decision-Making, • Identify damaged, collapsed, offset, deteriorated, or improperly installed sewer and water piping., • Assist in determining the appropriate repair method based on field conditions., • Recognize conditions requiring spot repair versus full replacement., • Identify potential conflicts involving utilities, foundations, structures, groundwater, or site access., • Communicate unexpected field conditions to supervisors before proceeding., • Work with plumbing technicians, sewer camera technicians, supervisors, and other team members to complete projects efficiently. Job Documentation, • Accurately document work performed., • Take required before, during, and after photographs of excavation and installation., • Document pipe depth, location, materials, fittings, and repairs as required., • Maintain accurate records of equipment, materials, and jobsite conditions., • Ensure required job documentation is completed before closing the project. Required Qualifications, • 5+ years of experience in residential sewer, underground plumbing, excavation, utility construction, or a closely related field., • Demonstrated experience installing and repairing underground sewer piping., • Experience operating mini excavators and other excavation equipment., • Understanding of proper pipe pitch, bedding, connections, backfilling, and compaction., • Ability to safely excavate around existing underground utilities., • Ability to perform physically demanding work in outdoor and indoor environments., • Ability to work independently while also effectively leading or working as part of a crew., • Strong troubleshooting and problem-solving abilities., • Valid driver's license with an acceptable driving record., • Strong commitment to safety, workmanship, and customer property protection. Preferred Qualifications Preference will be given to candidates with experience in one or more of the following:, • Trenchless pipe bursting, • Residential sewer lateral replacement, • Residential water service replacement, • Sewer spot repairs, • Interior/basement excavation, • Under-slab sewer replacement, • Mini excavator and skid steer operation, • Concrete cutting and removal, • Trench safety and competent-person training, • OSHA 10 or OSHA 30, • CDL, • Sewer camera inspection and locating, • Residential plumbing or drain/sewer service experience Physical Requirements Candidates must be able to:, • Regularly lift and carry heavy piping, equipment, tools, and materials., • Work inside trenches and excavations., • Work in basements, crawlspaces, and confined residential work areas., • Perform repetitive digging, lifting, bending, kneeling, and climbing., • Work outdoors in varying weather conditions., • Safely operate excavation and construction equipment for extended periods. What Success Looks Like A successful Residential Sewer & Underground Pipe Technician / Equipment Operator can take a properly scoped underground project and safely and efficiently execute the work from excavation through completed pipe installation. Success in this position means:, • Jobs are completed safely and according to scope., • Sewer and water piping is installed correctly the first time., • Excavations are performed with minimal unnecessary property damage., • Trenchless replacements are properly set up and executed., • Utility strikes and preventable jobsite incidents are avoided., • Jobs stay on schedule., • Equipment is properly maintained., • Work areas are clean and professional., • Customers feel that their homes and properties were respected throughout the project. Benefits Binsky Home Service offers a competitive compensation and benefits package, including:, • Competitive pay based on experience and skill level, • Health, dental, and vision insurance, • Paid time off and paid holidays, • Company-provided safety equipment and required tools, • Training and continuing education opportunities, • Opportunities for advancement as our sewer and underground services division grows Join Binsky Home Service We are looking for experienced underground professionals who take pride in doing difficult work the right way. If you have experience with residential sewer excavation, pipe bursting, sewer lateral replacement, water service replacement, underground plumbing, or interior excavation, we want to hear from you. Please submit your resume for consideration.

Job Description A leading client in Piscataway is seeking a wireless technician for a period of one year. This is a temporary opportunity. Job details are below. Apply today for immediate consideration! Title: Wireless Technician Pay rate: $35/hr - $40/hr depending on experience Duration: 12 months Location: Onsite in New Brunswick, one day work from home Hours: Monday through Friday, 8:30 - 5 pm Experience: • Experience as a cable technician or IT field technician 1- 2 yrs experience is ideal., • High school diploma, or a college degree (associates or bachelors) or applicable IT certifications. Duties, • Able to troubleshoot, terminate, test and qualify Ethernet cables., • Able to troubleshoot and evaluate wireless signal strength and performance., • Able to troubleshoot switch issues such as packet loss, POE budget and auto-negotiation., • Familiarity with Adobe Acrobat or Adobe Illustrator a plus., • Familiarity with Service Now a plus., • Assist with maintaining inventory of parts and equipment., • Assist with maintaining documentation., • Will climb step ladders to get to wireless access points.Requirements:, • Clean driving record. Individuals must have their own transportation as they may commute to nearby campuses within New Brunswick and Piscataway. May be asked to drive a client vehicle., • Good communication skills and professionalism required, • Must be punctual, dependable and reliable Pay Details: $35.00 to $40.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.adecco.com/en-us/candidate-privacy The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job Description Job Summary As a Medical Laboratory Technician at Aculabs, you will play a key role in ensuring timely and accurate laboratory testing. You will be responsible for conducting high-complexity testing under the supervision of qualified personnel, maintaining instruments and quality control protocols, and adhering to all regulatory and HIPAA compliance standards. About the Company Aculabs, an industry leader servicing long-term care homes across the Mid-Atlantic, is currently seeking qualified Medical Laboratory Technicians. Family-owned and operated since 1972, Aculabs takes pride in delivering high-quality diagnostic services with a commitment to excellence. Ideal candidates are self-motivated professionals eager to learn and grow alongside experienced laboratory staff. Work Schedules • Monday to Friday 4:00 pm - 12:30 am with Weekend and Holiday Rotation. Evening Coverage as needed, • Tuesday to Friday 2:00 pm - 10.30 pm, Saturday 10:00 am to 6.30 pm Benefits • Competitive pay, • Paid Time Off, • Opportunity for growth and advancement, • Health insurance and retirement benefits Responsibilities • Perform and monitor high-complexity laboratory testing under CLIA guidelines, • Maintain instruments, perform scheduled preventive maintenance, and ensure proper documentation, • Monitor quality control procedures to ensure test accuracy and compliance, • Ensure timely processing and completion of patient testing, • Report results following supervisor verification, • Identify and resolve issues that may impact test performance or result reporting, • Maintain accurate records for maintenance, quality control, and workload, • Communicate with supervisors to report irregularities or performance deviations Requirements/ Education (Any one of the following will be taken into account) • Must have an MLT or MT certification (Bachelor's in Microbiology/Biology is a plus), • MD, DO, DPM with current license in the State of the laboratory's location., • PhD in Clinical Laboratory Science or another medically similar science field., • MS in medical technology, clinical laboratory science, or chemical, physical, or biological science., • BS in medical technology, clinical laboratory science, or chemical, physical, or biological science., • AS in laboratory science or medical laboratory technology., • Strong attention to detail and ability to follow laboratory protocols, • Excellent problem-solving and communication skills Aculabs is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws.

Job DescriptionQC Position Duties: • Perform testing of plated product:, • XRF measurement of plating thickness., • Location of selective plating., • Solderability., • Dimensional, or mechanical measurements – for example – progression, camber, coil set, part width and thickness., • Visual examination of parts under a microscope., • Working safely with a variety of chemicals., • Other testing as specified., • Recording of results:, • Hard copy forms., • Electronic forms., • Assisting with Production needs:, • The workload in Quality Control is highly variable, depending upon the number of plating lines running and the product mix. It can be the case that staffing in QC exceeds what is needed to perform required quality testing. In those cases, the Quality Control Technician may be asked to assist Production. This can include items such as:, • Assisting with changeover., • Cleanup., • Assisting with preventive maintenance functions., • Acting as the second operator on products requiring more than one operator., • Helping with splices., • Other tasks as identified by the Production Manager or the Production Supervisor., • On the night shift, specifically, the Production Supervisor is authorized to assign Quality Control personnel to Production functions, at his or her discretion., • Record analytical results as required:, • Paper records., • Excel spreadsheets., • Maintain organized files of test results. Skills/Requirements: • This position requires basic math skills (add, subtract, multiply, divide)., • Basic Microsoft Excel knowledge is helpful., • Requires the ability to work a 12-hour shift. 6:00pm-6:00am, Train on days but it will be a night shift hours after training.

Job Description The Product Technician 3 is responsible for operating production machinery in accordance with established procedures and guidelines to produce products based on the specifications outline in the Job Book The Product Technician 3 is expected to: · Produce products that meet MICRO’s quality standards and customer specifications consistently Machine Operation 60% · Operates a variety of production equipment and machinery. · Manufacture, test, inspect, package, and label products according to defined procedures and instructions as appropriate. · Uses computer-controlled equipment to select, position and secure automatic or semi-automatic machines. · Verifies material, lubricants, solvents and packaging material are correct. · Produces products that conform to all of the requirements outlined in the job book · Monitors production process during the production run · Performs maintenance activities where applicable · Stops production when product is not in conformance and follows the nonconformance procedure. Product Inspection and Nonconformance Process 40% · Reads and interprets prints located in the job book. Verifies dimensions of finished product visually and/or by using inspection equipment per customer specifications. · Keeps inspection data based on the requirements of the job book. · Completes all necessary documentation. · Uses SPC to verify conformance of products · Identifies production or quality issues and reports it to the appropriate group. This position has no talent management responsibilities. EDUCATION AND EXPERIENCE · High school diploma or general education degree (GED) is preferred. · 0-2 years of experience in a manufacturing environment or equivalent combination of education and experience is preferred LICENSE AND CERTIFICATION · None TECHNICAL SKILLS · SPC · Blueprint OTHER SKILLS · WIP tracking · Multitasking · Personal Accountability · Problem solving · Spatial dexterity · Manual dexterity · Attention to detail · Organizational skills · Basic computer skills While performing the duties of this Job, the employee is regularly required to stand; walk; sit; use hands to touch, handle, or feel; reach with hands and arms; and talk and hear. The employee is occasionally required to stoop, kneel, crouch, or crawl. The employee must lift, push, pull, carry and/or move up to 10 pounds constantly, between 10 and 25 pounds frequently, and between 25 and 50 pounds occasionally. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. While performing this Job, the employee is regularly required to demonstrate manual and spatial dexterity sufficient to operate machinery for precision work. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts and vibration. The employee is frequently exposed to risk of electrical shock and odors, dusts, mists, fumes and/or airborne particles. The employee is occasionally exposed to wet and/or humid conditions. The noise level in the work environment varies from moderate to loud, based on the department/work area.

Job Description Guardian Fire & Life Safety Solutions is a locally owned and family-operated fire protection company dedicated to delivering exceptional service, integrity, and life safety solutions to businesses throughout our community. We are seeking a dependable, motivated Fire Protection Technician to join our growing team. This position is responsible for the inspection, testing, maintenance, installation, and repair of portable fire extinguishers and commercial kitchen fire suppression systems, while also supporting emergency lighting inspections and first aid equipment services. The technician will provide exceptional customer service, represent Guardian with professionalism, and ensure compliance with applicable fire codes and industry standards. Essential Responsibilities • Perform annual inspections, maintenance, and servicing of portable fire extinguishers., • Conduct semi-annual inspections and maintenance of commercial kitchen fire suppression systems., • Perform inspections, testing, and basic maintenance of emergency lighting and exit lighting systems., • Inspect, restock, and maintain workplace first aid kits and related safety equipment., • Install, replace, recharge, and hydrostatically test fire extinguishers as required., • Install and service kitchen fire suppression system components, including cylinders, nozzles, detection lines, pull stations, and control heads., • Complete accurate inspection reports, service documentation, inventory records, and compliance reports., • Identify deficiencies and communicate repair recommendations to customers and management., • Maintain company vehicle, tools, equipment, and inventory., • Follow all applicable OSHA, NFPA, and local fire code requirements., • Provide courteous, professional customer service while representing Guardian Fire & Life Safety Solutions., • Participate in ongoing training and maintain industry certifications as required., • Assist with additional fire protection and life safety services as assigned. Qualifications • High school diploma or GED required., • Minimum of 2 years of experience servicing portable fire extinguishers and/or commercial kitchen fire suppression systems., • Working knowledge of NFPA 10, NFPA 17A, and applicable fire codes., • Strong mechanical aptitude and troubleshooting skills., • Excellent attention to detail and organizational skills., • Strong communication and customer service skills., • Ability to work independently with minimal supervision., • Valid driver’s license with a clean driving record., • Ability to pass a background check and drug screening, if required. Preferred Qualifications • Current industry certifications related to portable fire extinguishers or kitchen fire suppression systems., • Experience with emergency lighting inspections and first aid equipment servicing., • Experience using digital inspection and reporting software. Physical Requirements • Lift and carry up to 75 pounds., • Frequently bend, kneel, climb ladders, and work overhead., • Work indoors and outdoors in varying weather conditions., • Safely operate hand and power tools., • Stand and walk for extended periods throughout the workday. What We Offer • Competitive pay based on experience., • Paid training and opportunities for industry certifications., • Company vehicle (when applicable)., • Uniforms and necessary tools., • Paid holidays and paid time off., • Opportunities for advancement within a growing, family-owned company. \nCompany Description Guardian Fire & Life Safety Solutions is a locally owned and family-operated fire protection company dedicated to delivering exceptional service, integrity, and life safety solutions to businesses throughout our community. Guardian Fire & Life Safety Solutions is a locally owned and family-operated fire protection company dedicated to delivering exceptional service, integrity, and life safety solutions to businesses throughout our community.

Job DescriptionCompany Description Cornerstone Building Brands is a leading manufacturer of exterior building products for residential and low-rise non-residential buildings in North America. Headquartered in Cary, N.C., we serve residential and commercial customers across the new construction and Repair & Remodel (R&R) markets. Our market-leading portfolio of products spans vinyl windows, vinyl siding, stone veneer, metal roofing, metal wall systems and metal accessories. Cornerstone Building Brands’ broad, multi-channel distribution platform and expansive national footprint includes more than 18,800 team members at manufacturing, distribution and office locations throughout North America. Corporate stewardship and Environmental, Social and Governance (ESG) responsibility are embedded in our culture. We are committed to contributing positively to the communities where we live, work and play. For more information, visit us at http://cornerstonebuildingbrands.com. Job Description Base Pay: $20.00 The QA Technician at Cornerstone Building Brands is responsible for ensuring product quality, compliance with customer and company requirements, and adherence to Quality Management System (QMS) standards. Reporting to the Quality Supervisor, this position performs inspections, testing, audits, and documentation activities while supporting continuous improvement initiatives across manufacturing operations. Based on historical quality technician responsibilities, the role includes product verification, quality documentation, customer requirement compliance, and support of stable manufacturing processes. Key Responsibilities • Perform incoming, in-process, and final inspections to verify product conformance., • Conduct product testing and document inspection results., • Monitor compliance with Critical to Quality (CTQ) requirements and standard work instructions., • Perform Layered Process Audits (LPA) and documentation reviews., • Support Non-Conformance Report (NCR), Corrective Failure Analysis (CFA), and Defect Material Report (DMR) processes., • Investigate quality issues and participate in root cause analysis activities., • Assist with containment activities and corrective action implementation., • Train production associates on quality standards, inspection methods, and customer requirements., • Utilize measuring devices including calipers, gauges, and specialized test equipment., • Support customer complaint investigations and verification activities., • Participate in continuous improvement, Kaizen, and waste reduction initiatives., • Maintain audit readiness and support internal and external audits.Qualifications, • High school diploma or GED required., • Minimum 3 years of manufacturing, inspection, or quality experience preferred., • Experience with quality audits, inspections, and documentation., • Knowledge of quality tools, root cause analysis, and corrective actions., • Ability to read and interpret specifications, drawings, and procedures., • Strong Microsoft Excel, Word, and Outlook skills., • Excellent communication and organizational skills., • Ability to work independently and in a team environment., • Experience in a regulated manufacturing environment is preferred. Additional Information All your information will be kept confidential according to EEO guidelines. Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. Cornerstone Building Brands is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, or status as a protected veteran. You can find the Equal Employment Opportunity Poster here. You can also view Your Right to Work Poster here along with This Organizations Participation in E-Verify Poster here. If you'd like to view a copy of the company's affirmative action plan for protected veterans or individuals with disabilities or policy statement, please contact Human Resources at 281-897-7788 or HRCompliance@cornerstone-bb.com. If you have a disability and you believe that you need a reasonable accommodation in order to search for a job opening or to submit an online application, please contact Human Resources at 281-897-7788 or HRCompliance@cornerstone-bb.com. This email is used exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only emails received for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. All your information will be kept confidential according to EEO guidelines. California Consumer Privacy Act (CCPA) of 2018 Must be at least 18 years of age to apply. Note to External Recruiters Cornerstone Building Brands does not accept unsolicited resumes and will not pay fees for any candidate submissions that were not expressly authorized. Notice of Recruitment Fraud We have been made aware of multiple scams whereby unauthorized individuals are using Cornerstone Building Brand's name and logo to solicit potential job-seekers for employment. In some cases, job-seekers are being contacted directly, both by phone and e-mail. In other instances, these unauthorized individuals are placing advertisements for fake positions with both legitimate websites and fabricated ones. These individuals are typically promising high-paying jobs with the requirement that the job-seeker send money to pay for things such as visa applications or processing fees. Please be advised that Cornerstone Building Brands will never ask potential job-seekers for any sort of advance payment or bank account information as part of the recruiting or hiring process.

Job Description Environmental Emergency Response company located in East Brunswick is looking for a technician to join our team. Experience in the environmental field is a plus but is not required. 40 hour Hazwoper, Confined Space, & TWIC card, are a plus but also not required. Will train the right candidate. Applicants MUST have a valid & clean New Jersey Drivers License and be able to pass a pre-employment drug test. Please note this is a 24/7/365 Emergency response company, all techs are required to be on call every other week.

Job Description The Product Technician 3 is responsible for operating production machinery in accordance with established procedures and guidelines to produce products based on the specifications outline in the Job Book The Product Technician 3 is expected to: · Produce products that meet MICRO’s quality standards and customer specifications consistently Machine Operation 60% · Operates a variety of production equipment and machinery. · Manufacture, test, inspect, package, and label products according to defined procedures and instructions as appropriate. · Uses computer-controlled equipment to select, position and secure automatic or semi-automatic machines. · Verifies material, lubricants, solvents and packaging material are correct. · Produces products that conform to all of the requirements outlined in the job book · Monitors production process during the production run · Performs maintenance activities where applicable · Stops production when product is not in conformance and follows the nonconformance procedure. Product Inspection and Nonconformance Process 40% · Reads and interprets prints located in the job book. Verifies dimensions of finished product visually and/or by using inspection equipment per customer specifications. · Keeps inspection data based on the requirements of the job book. · Completes all necessary documentation. · Uses SPC to verify conformance of products · Identifies production or quality issues and reports it to the appropriate group. This position has no talent management responsibilities. EDUCATION AND EXPERIENCE · High school diploma or general education degree (GED) is preferred. · 0-2 years of experience in a manufacturing environment or equivalent combination of education and experience is preferred LICENSE AND CERTIFICATION · None TECHNICAL SKILLS · SPC · Blueprint OTHER SKILLS · WIP tracking · Multitasking · Personal Accountability · Problem solving · Spatial dexterity · Manual dexterity · Attention to detail · Organizational skills · Basic computer skills While performing the duties of this Job, the employee is regularly required to stand; walk; sit; use hands to touch, handle, or feel; reach with hands and arms; and talk and hear. The employee is occasionally required to stoop, kneel, crouch, or crawl. The employee must lift, push, pull, carry and/or move up to 10 pounds constantly, between 10 and 25 pounds frequently, and between 25 and 50 pounds occasionally. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. While performing this Job, the employee is regularly required to demonstrate manual and spatial dexterity sufficient to operate machinery for precision work. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts and vibration. The employee is frequently exposed to risk of electrical shock and odors, dusts, mists, fumes and/or airborne particles. The employee is occasionally exposed to wet and/or humid conditions. The noise level in the work environment varies from moderate to loud, based on the department/work area.

Job Description The Product Technician 3 is responsible for operating production machinery in accordance with established procedures and guidelines to produce products based on the specifications outline in the Job Book The Product Technician 3 is expected to: · Produce products that meet MICRO’s quality standards and customer specifications consistently Machine Operation 60% · Operates a variety of production equipment and machinery. · Manufacture, test, inspect, package, and label products according to defined procedures and instructions as appropriate. · Uses computer-controlled equipment to select, position and secure automatic or semi-automatic machines. · Verifies material, lubricants, solvents and packaging material are correct. · Produces products that conform to all of the requirements outlined in the job book · Monitors production process during the production run · Performs maintenance activities where applicable · Stops production when product is not in conformance and follows the nonconformance procedure. Product Inspection and Nonconformance Process 40% · Reads and interprets prints located in the job book. Verifies dimensions of finished product visually and/or by using inspection equipment per customer specifications. · Keeps inspection data based on the requirements of the job book. · Completes all necessary documentation. · Uses SPC to verify conformance of products · Identifies production or quality issues and reports it to the appropriate group. This position has no talent management responsibilities. EDUCATION AND EXPERIENCE · High school diploma or general education degree (GED) is preferred. · 0-2 years of experience in a manufacturing environment or equivalent combination of education and experience is preferred LICENSE AND CERTIFICATION · None TECHNICAL SKILLS · SPC · Blueprint OTHER SKILLS · WIP tracking · Multitasking · Personal Accountability · Problem solving · Spatial dexterity · Manual dexterity · Attention to detail · Organizational skills · Basic computer skills While performing the duties of this Job, the employee is regularly required to stand; walk; sit; use hands to touch, handle, or feel; reach with hands and arms; and talk and hear. The employee is occasionally required to stoop, kneel, crouch, or crawl. The employee must lift, push, pull, carry and/or move up to 10 pounds constantly, between 10 and 25 pounds frequently, and between 25 and 50 pounds occasionally. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. While performing this Job, the employee is regularly required to demonstrate manual and spatial dexterity sufficient to operate machinery for precision work. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts and vibration. The employee is frequently exposed to risk of electrical shock and odors, dusts, mists, fumes and/or airborne particles. The employee is occasionally exposed to wet and/or humid conditions. The noise level in the work environment varies from moderate to loud, based on the department/work area.

Job DescriptionDescription: Built for Stability In an industry where layoffs and company buyouts have become common, Approved Fire Protection & Security remain focused on long-term growth and steady opportunity. We’re proud to hire talented professionals who are looking for lasting careers, not short-term stops. If you are interested in: • Steady workflow, • Supportive team culture, • Long-term opportunity for growth, • Respect for your craft, • Three strong locations with established operations About Us: Approved Fire Protection Co. is New Jersey's oldest family-owned, full-service fire protection and safety equipment company. Our services include fire extinguishers, alarm systems, suppression systems, SCBA, gas detection, carbon dioxide, oxygen, sprinkler systems, and so much more. Approved Fire Protection’s mission is to supply life safety products and service to the industrial, commercial, pharmaceutical, and municipal companies in New Jersey and near surrounding areas. Job Summary: We are seeking an experienced and dependable Field Sprinkler Project Specialist to join our team. This position is ideal for a skilled Fire Sprinkler Technician who thrives in the field and has the ability to work closely with Project Managers to ensure successful execution of commercial and industrial sprinkler system projects. The Field Sprinkler Project Specialist will be responsible for overseeing the on-site installation and maintenance of fire sprinkler systems, coordinating day-to-day field activities with the Project Manager, and ensuring work is completed in accordance with plans, codes, and safety standards. This is a hands-on field role requiring a high level of technical expertise, communication, and organizational skills. Benefits: · Medical · HSA · Dental · Vision · 401k with company contribution · Aflac · Life Insurance · Long term disability · Summer Hours Program · Profit Sharing · PTO Requirements: Essential Duties and Responsibilities: • On-site technician for Fire Sprinkler projects., • Coordinate with Project Managers on each jobsite., • Inspect, test, and service sprinkler systems in accordance with applicable fire codes., • Must have hands-on experience with field tools and equipment used in fire sprinkler installation and maintenance—including mechanical, electrical, and pneumatic systems—and must adhere to all applicable job site safety protocols and procedures., • Process all service paperwork timely and accurately., • Able to update and maintain information and processes in the company software system (Profit Zoom)., • Capable of handling on call (after-hours) emergency services work and regular hour emergency service jobs. Required Qualifications: • Prior experience, minimum 2 years, in Water-Based Systems Layout, with demonstrated experience in field installation and coordination on commercial or industrial sprinkler projects., • Strong written and verbal communication skills., • Ability to be proactive in communicating and working with other departments., • Valid driver's license and excellent driving record., • Must pass a background check and pre-employment drug screen., • Must be willing to travel throughout NJ as required to project field locations., • Excellent customer service skills., • Must be competent with all work-related power tools., • Excellent work ethic., • Comply with unform policy., • Language: English Preferred Qualifications: • Strong understanding of NFPA 13 and related codes., • Ability to read and interpret construction documents and sprinkler system plans., • Experience coordinating with project managers, inspectors, and other trades on active job sites., • OSHA 30 Certification or equivalent safety training., • Ability to work in a team or on their own., • Must be able to work Monday through Friday 7:20 am – 3:50 PM If all the above resonates with your experience and skill set, apply to join our team. We provide ample opportunities for professional development to our team members through ongoing in-house training, as well as encouraging team members to attend certification programs. We offer our employees a competitive salary and comprehensive benefits package and are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled Approved Fire Protection is deeply committed to a policy of equal employment opportunity for all its job applicants and employees. We seek to employ qualified persons in all job classifications and to administer all personnel actions affecting our employees without discrimination on the basis of race, color, religion, sex, pregnancy, age, national origin, sexual orientation, gender identity, political ideology, ancestry, or genetic information. Individuals with a disability, disabled and other protected veterans and any other characteristic protected by applicable law will be given the fullest consideration for employment in positions for which they are qualified. We also are committed to making reasonable accommodation for qualified individuals with a disability as well as abiding by any and all state and local laws, which in addition to the above prohibit discrimination in any form

Job Description SUMMARY Ensures that repairs are performed correctly and efficiently by qualified technicians and that the service department maintains a consistently high level of customer satisfaction. ESSENTIAL DUTIES include the following. Other duties may be assigned. Recruits, and motivates qualified service technicians. Assists technicians in developing their skills. Understands, keeps abreast of, and complies with federal, state, and local regulations that affect service operations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Understands and ensures compliance with manufacturer warranty and policy procedures. Ensures that all department employees receive appropriate manufacturer training. Conducts regular performance reviews for all technicians in accordance with dealership guidelines. Test drives the vehicle with customer as needed to confirm the problem or refers to test technician. Prioritizes and controls all comebacks to ensure proper and prompt attention. Ensures that all repairs are assigned to technicians in an equal and fair manner. Provides technical support for technicians when necessary. Ensures repairs are charged out correctly. Checks progress of each repair order throughout the day. Maintains high-quality service repairs and minimize comebacks. Conducts periodic spot checks of completed jobs for thoroughness and quality. Road tests vehicles to quality-check work performed. Accounts for all documents; ensures that none are missing and all are processed correctly. Establishes and maintains customer follow-up program to confirm satisfaction with the service experience. Handles all customer complaints within 24 hours, informing other managers as appropriate. Manages department performance using tools such as the daily operating control (DOC), efficiency and productivity control, comeback reports, warranty reports, telephone surveys, and monthly forecasts. Monitors technicians' daily productivity reports and corresponding payroll records. Monitors shop condition, including cleanliness, safety, and the condition of shop equipment. Reports problems to the service manager or dealer. Ensures the proper care, storage, and inventory of special tools. Prepares a list of needed service department equipment, supplies and required repairs, and reviews with the service manager as needed. Keeps abreast of new equipment and tools available and recommends purchases. Fills in for service advisor and dispatcher when necessary. Attends managers meetings as requested. Strives for harmony and teamwork within the department and with all other departments. Maintains safe work environment. Maintains professional appearance. SUPERVISORY RESPONSIBILITIES Shop technicians QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE 10 years shop experience Customer satisfaction experience LANGUAGE SKILLS English CERTIFICATES, LICENSES, REGISTRATIONS State Inspection License Commercial Drivers License PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to perform repairs when necessary. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job Description Job Title: Facility Technician Location: South Plainfield, NJ Type: Contract to Hire Compensation: Junior - $24-$30/hour Mid-Level - $30-$35/hour Senior - $35+, depending on experience Work Model: Onsite Hours: Monday through Friday (1st Shift) The Facility Technician will work across mechanical, electrical, HVAC, plumbing, refrigeration, and other building systems to help maintain safe, reliable, and efficient facility operations. This position will also coordinate with outside contractors and vendors and respond to both planned maintenance activities and unexpected equipment or facility issues. Responsibilities: • Operate, maintain, troubleshoot, and perform repairs on mechanical, electrical, plumbing, lighting, and other building systems., • Support HVAC systems and controls, including chilled water systems, air handlers/AHUs, boilers, heat exchangers, VAV systems, fan coil units, and refrigeration equipment., • Troubleshoot equipment and electrical systems up to 480VAC using schematics, hand tools, electrical meters, gauges, and common diagnostic or test equipment., • Complete preventive and corrective maintenance work orders using a computerized maintenance management or work-order system., • Respond to equipment, building, and facility issues as they arise., • Maintain mechanical, electrical, and storage areas in a clean, orderly, and safe condition., • Maintain familiarity with HVAC controls and assist with troubleshooting system performance issues., • Coordinate with subcontractors and vendors during maintenance, repair, and project activities., • Help ensure contractors follow applicable facility and safety requirements while onsite., • Maintain and report inventory of spare parts, tools, and service equipment., • Perform general building maintenance as needed, including plumbing, carpentry, and related repairs., • Maintain required documentation, including work orders, receipts, invoices, and other maintenance records., • Follow applicable government, state, local, company, and facility policies, procedures, and safety requirements., • Participate in job-related training and continuous development., • Respond to after-hours emergencies as required., • Maintain availability during scheduled holiday and facility shutdown periods as needed., • Perform additional facilities and maintenance duties as assigned. Qualifications:, • Previous hands-on experience in facilities maintenance, building systems, industrial maintenance, or a related technical environment., • Strong mechanical and electrical aptitude with demonstrated troubleshooting ability., • Working knowledge of HVAC, mechanical, electrical, plumbing, and/or related facility systems., • Ability to read and utilize schematics and use standard maintenance and diagnostic tools., • Basic computer skills, including familiarity with Microsoft Excel., • Strong communication, teamwork, and problem-solving skills., • Ability to work effectively with internal personnel, contractors, and vendors., • Ability to work under pressure and respond effectively to time-sensitive equipment or facility issues., • Ability to lift, push, pull, and/or carry at least 50 pounds., • Ability to regularly stand, walk, reach, climb, stoop, kneel, crouch, and crawl., • Ability to meet the visual requirements necessary to safely inspect, troubleshoot, and repair equipment. System One, and its subsidiaries including Joulé, and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. #M1 Ref: #562-Joule Staffing - Edison

Job Description The Maintenance Technician 1 performs highly diversified work involving electrical and mechanical equipment maintenance of a skilled and complex nature. Installs, repairs and maintains manufacturing equipment and plant facilities necessary for the satisfactory operations of equipment and processes. The Maintenance Technician 1 is expected to: · Minimize downtime on equipment · Maximize effectiveness and completion rate on PM system. · Ensure newly maintained equipment meets 100% of general safety standards Machine Maintenance 30% · Diagnoses complex machine and electrical equipment malfunctions and operation difficulties and determines how to correct them checking blueprints, repair manuals or parts catalogs as necessary. · Able to identify and coordinate improvement projects with engineers, vendors, and or contractors · Able to interpret servo drive error codes and error messages displayed on HMIs. · Performs routine maintenance work including inspecting drives, motors and belts, checking fluid levels and replacing filters · Helps in the investigation of operating difficulties and assists in taking corrective action. · Troubleshoots PLC malfunctions · Able to research, spec out and order parts accurately for repairs and upgrades Equipment Assembly 30% · Helps construct new equipment, machinery, or facilities as required. · Sets up and operates various types of machine shop equipment. · Reads, understands and implements electrical, electronic, pneumatic, hydraulic and mechanical diagrams and schematics required to install production machinery and safety equipment. Facility Maintenance 20% · Assists in the maintenance of heating, ventilating and air conditioning equipment. · Performs general building maintenance and minor repairs throughout the facility including painting, carpentry, plumbing and plastering · Works in conjunction with outside vendors EHS & Documentation 20% · Maintains related records, performs associated handling duties and maintains work areas in a neat and orderly manner. · Assists in managing hazardous materials including maintaining an accurate inventory, ensuring proper storage, scheduling/documenting of hazardous waste shipments and proper disposal. · Assists in audits for ISO 14001 This position has no talent management responsibilities. EDUCATION AND EXPERIENCE · High school diploma or general education degree (GED); or at least 3-5 years of maintenance experience and/or training; or equivalent combination of education and experience is required. LICENSE AND CERTIFICATION · None TECHNICAL SKILLS · Knowledge of plant equipment & machinery · Precision shop measuring devices and meters · Forklift operator · Mechanical aptitude · MS Word · MS Outlook OTHER SKILLS · Manual dexterity · Spatial dexterity · PLC and test equipment repair · Read and interpret o equipment manuals o work orders o hydraulic schematics o electrical schematics o pneumatic and mechanical schematics · Verbal communication · Able to work at heights · Able to work with chemicals While performing the duties of this Job, the employee is regularly required to stand; walk; sit; use hands to touch, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; and talk and hear. The employee must regularly lift, push, pull, carry and/or move up to 50 pounds alone and more than 50 pounds with assistance. While performing this Job, the employee is regularly required to exhibit strong manual and spatial dexterity. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts; risk of electrical shock and vibration. The employee is frequently exposed to hazards including fumes, odors, dusts, mists, gases or airborne particles and hazardous chemicals. The employee is occasionally exposed to high, precarious places and outside weather conditions. The noise level in the work environment is usually loud.

Job Description We are not seeking forklift operators; this role is geared towards those with experience repairing forklifts or other heavy equipment. Candidates need minimum 3 to 5 years’ experience. Founded in 1977, C&C Lift Truck, Inc. has continuously grown over the last 49 years to become one of the leading forklift dealerships in the Tri-State area, and one of the leading Komatsu dealers in the country. We are family owned and operated, and currently service NY, NJ and Eastern PA. We are currently looking for an experience A Level Shop Technician to work in our Edison, NJ location. Our mechanics will be required to accurately diagnose and repair all company and customer equipment. C&C Offers: • Union Pension Plan, • Medical, Dental, Vision benefits available, • Vacation Time, • Retirement Plan Opportunities, • Overtime Opportunities, • Competitive wages, • Supplemental Pay (bonus pay, commission pay, signing bonus) Primary Responsibilities: • Job will require IC forklift repairs, including:, • Complex diagnostic on all makes and models, • Large repairs, such as transmission overhauls, engine rebuilds, replacements, etc., • Diagnostic and repair of fuel systems (Gas, LPG, & Diesel), • Electric forklift repairs, • Diagnosis of complex wiring issues, • Battery and charger diagnostic and repair, • Hydraulic system repairs, • Brake and steer axle system repairs, • Complete scheduled PM and repair assignments within the time frame allotted, • Use diagnostic tools to test forklift components, • Perform quality inspections on junior technicians’ repairs and services. Skills Required: • The ability to stand and walk for long periods of time, • Computer proficient, with history of working with digital workorder systems and computer diagnostic tools., • Employee must be able to push, pull, carry, grasp, reach and crouch when needed for the job, • Employee must be able to communicate effectively with management, customers, and other employees, • Job will require the employee to interpret documents, comprehend basic instructions (written or verbal), apply abstract principles to a wide range of complex tasks, • Employee must be able to analyze information and write a diagnosis on work orders, • The ability to decipher different colors, • Must be able to work individually and as a team Qualifications: • Prefer 3 or more years' experience as a heavy equipment mechanic or related mechanic jobs, • Strong mechanical aptitude and troubleshooting skills, • Deadline and detail-oriented, • Ability to lift 50 lbs., • Willingness to learn, • Ability to thrive in a fast-paced environment Schedule: 7:30 a.m to 4:00 p.m. shop hours All candidates will be required to undergo a criminal, drug screening and motor vehicle background check.

Job Description The HORIBA Group of worldwide companies provides an extensive array of instruments and systems for applications ranging from automotive R&D, process and environmental monitoring, in-vitro medical diagnostics, semiconductor manufacturing and metrology, to a broad range of scientific R&D and QC measurements. Proven quality and trustworthy performance have established widespread confidence in the HORIBA Brand. Inspired by our unique motto, “JOY and FUN,” we focus on social responsibilities by building state-of-the-art products for scientific advancement; especially for protecting health, safety, and the environment. “HORIBARIANs,” the HORIBA employees all over the world, look forward to working with additional creative and entrepreneurial self-starters. To learn more about our unique culture, visit our culture page. HORIBA is a global group of companies that develops, manufactures and provides an extensive array of analytical and measurement equipment to countries around the world. HORIBA Instruments Inc., a leading manufacturer of scientific instruments has an immediate opening for a CCD Lab Technician in the Piscataway, New Jersey facility. Duties/Requirements: • Soldering skills, the ability to read mechanical and electrical drawings and schematics are a must, • Hands-on mechanical skills and familiarity with electronic test equipment such as meters and oscilloscopes., • Two – Four-year degree related to mechanical or electrical engineering and or related work experience. Compensation Package: HORIBA Instruments offers a competitive compensation package that includes a 401(k) plan with match; employee group dental, vision, life, and disability (short and long-term) paid for by the company; medical insurance, family dental and vision insurance, and supplemental life insurance available with reasonable employee contributions; employee assistance program; paid holidays, vacation, and sick time; flexible spending accounts; and educational reimbursement and commuter benefit programs. If you are an individual with a disability and need an accommodation during the application/hiring process, please call (732)494-8660 for assistance. HORIBA will provide reasonable accommodations, upon request, to support individuals with disabilities to be able to participate in the hiring process. HORIBA is committed to making our workplace accessible for individuals with disabilities. EEO/Affirmative Action/Veteran Status/Disabilities.

Job Description DEPARTMENT: Tool Room REPORTS TO: Molding Department POSITION DESCRIPTION: The Tool Room Technician produces effective mold and die repairs through the following: fitting components into molds; finishing new products, components, or inserts; assembling pieces when complete; as well as documenting mold repair procedures in IQMS. RESPONSIBILITIES: • Support the Tool Room Supervisor in the process of setup, testing, procedures, training, and updating of IQMS relative to tooling and operations., • Perform accurate, safe and correct setups prior to commencement of operation., • At point of startup, assure no flash, water leaks and other potential issues. Address any known previous problems or issues. Properly test for water leaks and test electrical for any issues., • Comply with the established standardization of mold setup and teardown procedures. Apply learned best practices., • Select, align and secure fixtures, cutting tools, attachments accessories and materials on machines, • Starts and observes machine operation to detect malfunctions or out-of-tolerance machining and adjusts machine controls as required., • Verifies conformance of finished work piece to specs., • Fits and assembles parts into complete assembly., • Verifies dimensions and alignment of assembly., • Perform work within the Tooling Preventive Maintenance program including but not limited to in-mold closings, hoses and water fittings. Utilize IQMS/Kanban to maintain processing related to equipment., • Change non-production molds in advance as needed., • Follow proper procedures including lock-out / tag-out, mold maintenance sheets and others., • Maintain consistent and effective component cleaning and storage., • Maintain liner dies needed for production., • Support OEE/SEE metrics and related goals of cycle attainment, zero-block cavitation, mold set-up compliance, and changeovers to maximize mold efficiency., • Follow the escalation process for tool issues by consistently and openly sharing information with the Tool Room Manager., • Document, standardize and create procedures for repeatability, predictability and improved efficiency specific to related activities., • Perform data entry on shop floor as needed., • Collaborate with Engineering to enable effective vendor sourcing., • Participate in internal machining projects., • Actively participate in tool teardown meetings., • Participate in shift hand-off activity to ensure a smooth shift transition., • Other duties as assigned. RESPONSIBILITIES: • Safety Responsibilities:, • Supports a culture where employees address unsafe conditions and behaviors, make suggestions for improvements, and actively participates in implementing solutions, • Identifies safety gaps and self-initiates corrective actions, • Strictly adheres to plant safety, housekeeping, and 5S efforts, • Understands, identifies, and corrects safety hazards, • Drives a culture which empowers employees to understand and embrace what they own, • Food Safety Responsibilities:, • Monitors and verifies activities to ensure that finished goods and raw materials are coming in and out of the facility meet consumer safety and quality standards., • Complies with all company food safety and quality assurance procedures, • Reports any product or process failures that could impact food safety of manufactured products to the location’s Food Safety Team Leader and submits an appropriate incident report PHYSICAL REQUIRMENTS: While performing the duties, the employee will be required to sit and/or stand, talk or hear, both in person and by telephone; use hands, fingers and arms to feel objects or controls, reach with hands and arms. Prolonged standing/walking periods of 12 hours. May be required to stoop, kneel, bend, crouch and lift to 50 pounds. RESPONSIBILITIES: • Safety Responsibilities:, • Supports a culture where employees address unsafe conditions and behaviors, make suggestions for improvements, and actively participates in implementing solutions, • Identifies safety gaps and self-initiates corrective actions, • Strictly adheres to plant safety, housekeeping, and 5S efforts, • Understands, identifies, and corrects safety hazards, • Drives a culture which empowers employees to understand and embrace what they own, • Food Safety Responsibilities:, • Monitors and verifies activities to ensure that finished goods and raw materials are coming in and out of the facility meet consumer safety and quality standards., • Complies with all company food safety and quality assurance procedures, • Reports any product or process failures that could impact food safety of manufactured products to the location’s Food Safety Team Leader and submits an appropriate incident report About MRP: MRP Solutions (MRP), a plastic cap manufacturer, is a leading provider of high-quality, injection molded plastic closures, jars and packaging components used every day by millions of consumers around the globe. But we offer more than just plastic caps and lids – we deliver industry-leading packaging solutions tailored to each customer’s unique requirements, providing best-in-class product protection while ensuring consumer confidence. MRP Solutions combines extensive packaging expertise with a consultative approach to reliably uncover customer needs. By understanding your business goals, we can tailor smarter, safer, and more flexible packaging solutions that reduce cost and increase speed to market, helping your businesses capitalize on opportunity. By constantly innovating, MRP enables our customers to grow, making us a preferred partner. We are passionate about partnering with distributors and manufacturers who understand that plastic caps and lids are a small but important part of how people experience their brands. Together, we deliver packaging with purpose. Our Vision: We deliver industry-leading packaging solutions tailored to each customer’s unique requirements, providing best-in-class product protection while ensuring consumer confidence. By constantly innovating, MRP enables our customers to grow, making us a preferred partner. Our Values & Beliefs • Integrity – We have the courage to act with the highest level of integrity, even when no one is watching. We do what is right 100% of the time., • Value Creation – The sole reason a company exists is to create real long-term value for society. This starts with ensuring human safety, as value cannot be created without first protecting human life. We seek opportunities for mutual benefit with all of our stakeholders, including customers, employees, shareholders, suppliers, and the communities in which we operate. In everything we do, our overarching goal is to deliver superior results.., • Accountability - We are accountable to each other and to our stakeholders. We say what we do and do what we say. We embrace a culture of ownership, empowering and equipping employees with the ability to own their outcomes., • Entrepreneurial - Everyone thinks and acts like owners, employing good economic and critical thinking skills while adopting the risk profile of our shareholders. We are inquisitive, constantly seeking out opportunities to improve, actively searching for and innovating across each and every aspect of our business. We relentlessly strive to understand and profitably anticipate what our customers need and value, because if our customers do not grow, we do not grow., • Respectful and Friendly – Everyone deserves to be treated with respect and dignity. Because everyone's perspective has value, we embrace diversity of thought, background and experiences. We are friendly and lead with a smile. What we do is important, but how we do it is what makes it impactful., • Change - We actively seek out and embrace change wherever profitable. Because society is constantly identifying and employing new and better ways of accomplishing tasks, we must constantly innovate, reinvent and, ultimately, destroy the old ways of doing business. We actively engage in rigorous debate and embrace challenge to ensure we stay relevant and deliver superior results., • Fulfillment – Our employees are the foundation of our success. We foster an environment enabling our employees to learn, grow and accept more accountability as they demonstrate capability. We promote more than just individual connection as community at work brings people together through common interest, objectives or experiences. MRP Solutions is an equal opportunity and affirmative action employer. We do not discriminate in recruiting, hiring or promotion based on race, color, religion, sex (including sexual orientation, gender identity or expression, transgender status), national origin, age, disability, medical condition, marital or protected veteran status or any other basis or characteristic prohibited by applicable federal, state, or local law. Consistent with the obligations of state and federal law, MRP Solutions will make reasonable accommodation for qualified individuals with disabilities. Any employee who needs reasonable accommodation should contact Human Resources. #INDS