Offres electrical maintenance engineer à NuneatonCréer des alertes d'emploi

The Reliability Maintenance Engineering (RME) team at Amazon is fundamental to our operations – they’re the ones keeping vital machinery running at all times. As an RME Technician, you’ll maintain a wide range of equipment and workspaces while upholding Health and Safety best practices. You'll help to keep your colleagues safe and prevent machine downtime. Our RME Technicians boost the availability and quality of our equipment and work to enhance the operational environment too. Key job responsibilities • Proactive and preventative maintenance tasks on a wide range of site equipment, • Carry out reactive repairs and fault diagnosis in a live distribution warehouse, • Use the latest tools to maximize equipment effectiveness, • Uphold all health and safety policies and practices, • Support the development and progression of on-site apprentices, • Work on continuous improvement projects and roll out best practices across a range of EU sites A day in the life Our RME Technicians are based on-site, so they can respond quickly to any machinery issues. You’ll carry out a range of planned preventative maintenance to our sites’ equipment to make sure it’s working safely. As an RME Technician, you’ll also respond promptly to breakdowns, investigating, finding, and implementing solutions as quickly as possible. You’ll also make suggestions for long-term improvements. Working alongside senior colleagues, you’ll undertake day-to-day maintenance tasks like painting and plumbing and will liaise with contractors if you need external expertise. You’ll work on a range of shifts to make sure our sites are supported around the clock – allowing Amazon to deliver at the speed we’re known for. About the team Our Reliability Maintenance Engineering or RME team keep our equipment performing at its best. We're a technically minded team, made up of excellent team players and guided by experienced leaders. We work together to maintain, troubleshoot and repair equipment across our global network of fulfilment centres. Some of our people are leaders, who oversee the team as they work on exciting technology – some of which only exists at Amazon. From installing automated packaging systems to overseeing the general maintenance of a site to repairing key distribution equipment, our team handles most aspects of Amazon’s technical side. This includes keeping buildings legally compliant, so everyone is safe, and our sites are operating at maximum efficiency. There are lots of opportunities for progression, both within the RME team and more widely across Amazon. Everything we do focuses on reducing downtime in Amazon’s crucial operations sites, so customers get their orders on time. We often work during early or late hours to carry out maintenance with minimal disruption, including night shifts. If we spot a better way to do something, we have the skills and the opportunity to develop and introduce completely new processes or cutting-edge tech like Amazon Robotics and our Complex Item Sorter. • NVQ Level 3 in Mechanical, Electrical or Mechatronics, or completed a 4-year UK certified apprenticeship, • SVQ Level 3 (or equivalent) in Mechanical, Electrical or Mechatronics, or completed a 4-year UK certified apprenticeship, • Work a flexible schedule/shift/work area, including weekends, nights, and/or holidays, • Served a full Engineering indentured apprenticeship and/or qualified to a minimum NVQ Level 3 or equivalent in a relevant Engineering subject, • Relevant experience as a qualified engineer, • Relevant experience working in mechanical and/or electrical maintenance, • Advanced proficiency in the local language verbally and in writing, • Associate's degree in Mechnical or Electrical, • Experience with material handling equipment (MHE) safety standards accordance with original equipment manufacturer (OEM) and safety standards, • Experience with robotic operation and maintenance, • Experience in condition-based monitoring, • Experience working with print and apply machines, • Experience in fault-finding and maintaining conveyor or automation systems Amazon is an equal opportunities employer. We believe passionately that employing a diverse workforce is central to our success. We make recruiting decisions based on your experience and skills. We value your passion to discover, invent, simplify and build. Protecting your privacy and the security of your data is a longstanding top priority for Amazon. Please consult our Privacy Notice (_) to know more about how we collect, use and transfer the personal data of our candidates. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit _ for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.

About Us Established in 2012, SolaX Power is committed to helping customers transition to clean energy and reduce dependence on fossil fuels. As a global leader in solar inverter and battery storage solutions, we have a strong presence across Europe, Asia, Africa, and Oceania. With over 2,800 employees worldwide, SolaX is continuously expanding and seeking talented individuals to join our team. We believe that at SolaX, an international organisation, your career can grow to new heights. We are currently looking for a Technical Support Engineer based in the United Kingdom to support our installer clients, partners, and internal teams across the UK market. Job Responsibilities • Provide pre-sales, in-process, and after-sales technical support for installer clients in the UK market., • Collaborate with cross-functional team members on customer visits, technical troubleshooting, and market research., • Create and maintain detailed service documentation, including service reports, maintenance records, and customer communication logs., • Perform other tasks and assignments as required by management. Job Requirements • Background in Electrical Engineering, Electronics, Power Systems, Automation, Renewable Energy, or related fields., • Effective internal and external communication., • Strong client-facing skills with the ability to handle and resolve technical issues independently., • Helpline or call center customer service experience, a background as an electrician, or practical hands-on experience installing inverters/batteries is preferred., • Experience in PV (photovoltaic), inverters, or energy storage systems is preferred. What We Offer • Competitive salary and benefits aligned with UK market standards., • Opportunities for technical training and international collaboration., • A supportive, inclusive, and dynamic work environment., • The chance to contribute to the renewable energy transition in the UK and Europe. How to Apply If you’re passionate about clean energy and eager to be part of a fast-growing global company, we’d love to hear from you. Please send your CV and cover letter to elaine.gao@solaxpower.com

Senior Service Engineer We require an experienced and qualified Senior Service Engineer to join our team. Working alongside the Location Service Manager, you will be responsible for the engineering team and contributing to the smooth running of this busy workshop in order to maintain our fleet and meet customer expectations. Responsibilities include: - Assisting the Location Service Manager in the smooth day-to-day running of this busy workshop. Ensure 100% coverage for the servicing and maintenance of our modern hire fleet. Carry out pre-delivery inspections (PDI) of each machine is carried out at depot or on site as required. Produce monthly plant inspection reports and service schedule and organise workload of engineers to ensure all work is completed in accordance with company policies. Maintain the appearance of the fleet to corporate standard Offer guidance and support in response to customer breakdown calls. Locate spares required, ensuring that CE rating, where applicable is not compromised. Follow the guidelines set out in the Quality and Health and Safety policy. Maintain basic stock control system for the workshop spares. Identify training and development needs of workshop personnel. Support depot engineers with technical help and advice. About you: - Supervisory experience in a busy workshop and supervising engineers/technicians with the ability to set high standard. Previous experience in Powered Access industry or other construction plant hire. Qualified to NVQ level 3 or equivalent in a maintenance/engineering discipline. The ability to prioritise and work well under pressure. Experience in mechanical, electrical and hydraulic systems is desired. Good interpersonal skills and an understanding of the importance or excellent customer service. Part of the Loxam Group, Nationwide Platforms are the UK's leading specialist provider of Powered Access rental equipment, with the largest and broadest fleet, local depots spread across the country and our wealth of experience partnering with companies in a variety of sectors including Construction, Warehouse & Distribution, Aviation, Facilities Management, Industrial Services, Telecoms and Media, our customers can depend on us to provide the right solution to support their every working at height need. At Nationwide Platforms, your safety is absolutely our priority. Our award winning BlueSky Solutions and Training division offer our customers access to the latest and safest ways to work and through long standing partnerships with our manufacturers, we will always provide equipment that will lead the way to a safer industry. Some of our innovations include the award-winning secondary guarding systems and Harness ON™, a range of pioneering Material Handling Attachments (MHAs), and the SkySentry™ control and monitoring system. At Nationwide Platforms, we are dedicated to fostering a diverse, equitable, and inclusive workplace. We recognise that a variety of perspectives, experiences, and backgrounds is crucial to our success in the Powered Access industry. Our commitment is to ensure that every employee feels respected, valued, and supported in their work environment TPBN1_UKTJ

Maintenance Engineer Cadeby, Leicestershire £46,000 plus Bonus (£52,000-£55,000) Monday to Friday 3 shift rotation (Days, Afternoons, Nights) We are looking for a Maintenance Engineer to join an existing maintenance team and assist in setting up a new facility. Benefits: Substantial production bonus Realistic earnings between £52,000- £55,000 Overtime on tap all paid at 1.5X No bank holiday working and no working over Christmas! 29 days holiday Career progression and lots of training and development opportunities We turnover well in excess of £250m annually across our UK sites and are investing in setting up a new facility at our Cadeby site. The successful applicants roles and responsibilities will include, assisting in installations, reactive and planned maintenance on conveyors, loading bays, hydraulics, pneumatics, large industrial conveyors, mixers, presses, and Fanuc robots. The successful applicant will be: Multi-skilled maintenance engineer with either a mechanical or electrical bias 70:30 either bias Ideally experienced with hydraulics, pneumatics, and confident fault finding skills Ideally come from a heavy industry background but this is not a necessity. Get in touch with Josh Sharkey regarding this maintenance role or any other maintenance roles in the Leicestershire area. INDSW TPBN1_UKTJ

Mobile Plant Fitter – Norfolk / Mildenhall £19.00 – £24.00 per hour + Overtime Norfolk / Mildenhall | Field-Based NEOS Engineering are recruiting for an established construction machinery business looking to add an experienced Mobile Plant Fitter to their engineering team, covering Norfolk, Mildenhall and the surrounding areas . This is a hands-on field-based role working primarily on a modern fleet of excavators, telehandlers, rollers and associated construction plant . The Role Carry out servicing, maintenance and repairs on construction plant. Diagnose and repair mechanical, hydraulic and electrical faults. Attend breakdowns and minimise machine downtime. Complete planned preventative maintenance and inspections. Maintain accurate service and repair records. Liaise with customers and the wider engineering team. Ensure all work is completed safely and efficiently. About You We're looking for an experienced Plant Fitter / Mobile Plant Engineer with a strong background working on construction machinery. You'll ideally have: Previous experience working on heavy plant or construction equipment . Strong mechanical, hydraulic and electrical fault-finding skills. Experience with excavators, telehandlers, rollers or similar machinery. Ability to work independently in a field-based role. Relevant plant engineering qualification is desirable but not essential. Full UK driving licence. Package £19.00 – £24.00 per hour , depending on experience. Overtime available. Company vehicle. Ongoing training and development. Stable opportunity with an established construction machinery business. If you're an experienced Plant Fitter looking for a new field-based opportunity covering Norfolk / Mildenhall , get in touch with NEOS Engineering for a confidential conversation. TPBN1_UKTJ

Saputo Dairy UK is part of Saputo Inc., a top ten global dairy company, offering the best of both worlds: the agility and warmth of a dedicated UK business with the support and resources of a global group. We pride ourselves on our inclusive, collaborative culture, where people are valued, supported, and empowered to make a difference. Our commitment to sustainability, innovation, and quality makes us a leader in the UK food industry. ABOUT THIS OPPORTUNITY After significant financial investment leading to us having 18 packaging lines at the Nuneaton site, we are looking to hire a Shift Engineer to support reactive and some preventative maintenance, playing a key role in the continued evolution of the engineering department and its strategies. This is a hands-on role, where your responsibilities will be working on reactive engineering requirements across two packaging production areas, and will be key in the continued drive towards a one-site mentality. Within the role, youll be working on both mechanical and electrical requirements, and we will look to you to bring strong fault-finding methodologies and expertise. Equipment youll be working with: Block cutters, slicers, graters, weight checkers, formers, belt conveyors, elevators, rollers, case packers, robotic arms (KUKA), automatic pallet wrappers. Shift pattern: 4-on (2-days/2-nights 6.45-7) / 4-off YOULL MAKE CONTRIBUTIONS THAT MATTER BY Maintaining multiple lines of automated systems, slicers, scales, bagging, sealers, and packaging equipment Optimising line performance to meet and exceed KPIs in the areas of equipment reliability and efficiency Ensuring appropriate information on plant performance is captured and recorded Completing maintenance activities to drive a predictive approach to tasks and prevent equipment failures YOURE BEST SUITED FOR THE ROLE IF YOU ARE A multi-skilled engineer with a minimum Apprenticeship / NVQ Level 3, plus an HNC or HND ideally (or equivalent) Able to demonstrate hands-on reactive experience with a broad range of equipment and machinery within a production and/or manufacturing environment Able to carry out fault-finding with PLCs (nice to have, not a prerequisite) Able to demonstrate working experience with lean manufacturing tools and techniques Experience working within a TPM environment Comfortable using CMMS and able to interpret data to increase plant efficiency and identify top loss WE SUPPORT AND CARE FOR OUR EMPLOYEES BY PROVIDING YOU WITH We Share bonus scheme Enhanced employer pension contributions with Scottish Widows Health cash plan - claim money back towards essential healthcare such as dental, eye care etc. Access to Thrive 24-hours a day - a leading and NHS clinically approved app which focuses on general wellbeing Long service recognised every 5 years Life assurance up to 4 x contractual pay Discounted branded products Opportunities for progression within the UK and overseas Free, onsite parking Individual allocated lockers Subsidised staff restaurant My Staff Shop - access to exclusive benefits, free advice and savings -providing great discounts from thousands of the UKs largest retailers & service providers. DIVERSITY, EQUITY AND INCLUSION AT SAPUTO We support employment equity. Saputo strives to embed diversity and inclusion in its operations and invites candidates from all horizons to join our team. We are an accredited Disability Confident Employer where we strive to ensure our site is inclusive and accessible for all. To enable you to bring your best we will ensure you are provided with any physical or non-physicaladjustments to support your participation in the job application and interview process. TPBN1_UKTJ

Maintenance Engineer Based in Hinckley £42000 basic + benefits We are recruiting for an experienced Maintenance Engineer. We are looking for a proactive, reliable and experienced Maintenance Engineer who takes ownership of their work, is confident fault finding and problem solving, and takes pride in high standards of safety, reliability and workmanship. You will be responsible for maintaining the safe, reliable and efficient operation of machinery, equipment and site facilities through planned preventative maintenance, breakdown response, fault finding and continuous improvement. You will have a primary site but may occasionally be required to support our Northants location during periods of peak demand, annual leave, sickness absence and other operational requirements. What we can offer the Maintenance Engineer: £42000 DOE basic salary Overtime available Monday to Friday 0800 1630 working hours Pension Enrolment 28 days annual leave Parking Onsite canteen This is an opportunity to join an established engineering function in a varied, hands-on role with the opportunity to: Contribute directly to equipment reliability and production continuity. Work across a range of engineering and maintenance activities. Support continuous improvement initiatives. Develop your skills across multi-skilled engineering systems. Support and mentor an engineering apprentice. Key Responsibilities of Maintenance Engineer: Carry out planned preventative maintenance (PPM) and reactive maintenance. Respond to breakdowns, diagnose faults and complete effective repairs. Undertake mechanical maintenance and fault finding. Apply electrical, pneumatic and hydraulic fault-finding skills where required. Identify recurring faults and recommend improvements. Support machinery installation, modification and improvement. Maintain engineering spares, tools and equipment. Work safely and in accordance with company procedures. Provide guidance and mentoring to the Maintenance Apprentice. Provide engineering support across both sites when required. Essential Requirements for Maintenance Engineer: Minimum Level 3 Engineering qualification, such as EAL Level 3 Engineering and Manufacturing Technician or equivalent, with proven post-qualification maintenance engineering experience. This is an experienced Maintenance Engineer position and is not intended for newly qualified or trainee engineers. Strong mechanical maintenance and fault-finding skills. Working knowledge of electrical, pneumatic and hydraulic systems. Experience of PPM and reactive maintenance. Ability to diagnose faults, solve problems and work independently. Ability to take initiative and manage changing priorities. Strong commitment to health and safety. Good communication and teamwork skills. Desirable: Additional engineering qualifications and experience supporting or mentoring apprentices or junior engineers. Working Environment for the maintenance engineer: This is a hands-on manufacturing role involving regular walking, standing and manual handling. PPE is required at all times. You will be comfortable working independently, taking initiative and working collaboratively with Production and other departments. Immediate Start Available If you have the required Level 3 engineering qualification and relevant post-qualification maintenance experience, we would like to hear from you, so apply today or get in touch to arrange a telephone screening. TPBN1_UKTJ

Maintenance Engineer (Mechanical Bias) £37,000 - £42,000 + Training + Days Only + Overtime + Yearly Bonus + Monthly Incentives + Company Social Events + Free On-Site Parking Hinckley Are you a Mechanically Biased Maintenance Engineer, who holds good electrical knowledge, looking to work for a global supplier? On offer is the opportunity to join a well-established, family run company, operating since 1983. They supply a wide range of traditional and next-generation refrigerants and associated products across the refrigeration, air-conditioning and automotive markets, with its products reaching customers across more than 40 countries. You will be responsible for carrying out planned and reactive maintenance across the site, responding to breakdowns, diagnosing faults and completing effective repairs. In specifics, you will work on pumps, motors, compressors and pipelines whilst also completing other general maintenance activities. The suitable candidate will have experience working as a mechanically biased Maintenance Engineer with solid electrical knowledge. The Role Install, maintain, and fault-find vehicle electrical systems and aftermarket accessories Carry out electrical testing and diagnostics using specialist equipment and OBD scanners Read and interpret wiring diagrams, technical manuals, and vehicle schematics Monday to Friday, 8 - 5, attending the head office each morning to collect parts Travelling to customers across Lancashire The Person Experience working as a Maintenance Engineer or similar Good mechanical skillset coupled with electrical knowledge Relevant engineering qualification If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. Reference Number: BBBH27310 Keywords: Maintenance Engineer, Maintenance Technician, Mechanical Maintenance Engineer, Multi-Skilled Maintenance Engineer, Engineering Maintenance, Manufacturing, Industrial Maintenance, Mechanical Engineering, Mechanical Maintenance, Fault Finding, Mechanical Fault Finding, Electrical Fault Finding, Pneumatic Systems, Pneumatics, Hydraulic Systems, Hydraulics, PPM, Planned Preventative Maintenance, Preventative Maintenance, Reactive Maintenance, Breakdown Maintenance, Breakdown Response, Machinery Maintenance, Equipment Maintenance, Machinery Installation, Machinery Modification, Hinckley, Leicester, Coventry We are an equal opportunity employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The remuneration offered will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. TPBN1_UKTJ

Job Title – Maintenance Engineer Salary £51000 - £53000 Permanent Night Shift: Sun 20:50–06:00 | Mon–Thurs 22:30–06:00 Location – Coventry SO, WHATS IN IT FOR YOU Plenty of training and support – large global company World Class Manufacturing Facility. Career progression if you want it opportunity to progress to a team leader The Company Our client specialises in the manufacturing of a variety of products for the global market. They are looking to recruit a Maintenance Engineer to work in their automated production facility in Coventry. There are many opportunities for progression for the right candidate and lots of opportunity for training. The Maintenance Engineer will be required to perform full strip down and repair on the following: conveyors, robots, hydraulics, pneumatics, welding equipment, presses, and various other automated equipment. To maintain all plant and equipment so that it can run at its optimum speed and reliability level. Provide quick and effective response to all unplanned equipment breakdowns. Complete all allocated TPM in accordance with the appropriate schedules and specific requirements. Provide an effective and efficient response to all unplanned plant and equipment breakdowns, both mechanical and electrical. The Candidate To be successful in your application you must have the following skills, abilities or qualifications: Must have previous experience working as Maintenance Engineer. Knowledge of Siemens S7 would be advantageous. Must have a recognised electrical or mechanical Level 3 qualification Our client is also keen to speak to candidates who are looking for a long-term career. Full equipment training would be provided. As a Maintenance Engineer, you will expect Salary £51000 - £53000 Will look at candidates who are in engineering roles and want to step up into leadership in the future. Excellent training Company pension plan available. Continuous progression opportunities and training available. Our client will offer training/development and possible progression for the right candidate. ATA is committed to creating a diverse workforce and is an equal opportunities employer. We welcome applications from all suitably qualified persons regardless of age, disability, gender, marriage and civil partnership, pregnancy and maternity, race, religion or belief, sex, and sexual orientation TPBN1_UKTJ

You may have experience of the following: Plant Engineer, Plant Engineer, Electrical Engineer, Mechanical Engineer, Electrical Engineering, Mechanical Engineering, Engineer, Plant Maintenance Engineer, Plant Engineering, Maintenance Engineer, Maintenance Engineering etc. You will join us as a Plant

Seeking a Facilities Maintenance Engineer with electrical qualifications for a site-based role in Leicester, involving PPM and reactive maintenance with a flexible shift pattern and good work-life balance.

Electrical Maintenance Engineer needed for a distribution business.

A well-established and respected manufacturer based in Nuneaton is looking for a skilled and driven Maintenance Engineer to join their team on the night shift. This is your opportunity to become part of an innovative company known for excellence in mechatronics and a commitment to continuous improvement. Key Responsibilities of a Maintenance Engineer: Carry out planned maintenance activities in line with TPM schedules Respond to and resolve breakdowns quickly to keep production running Use OEE and downtime data to drive uptime improvements PLC fault finding (Siemens) Reduce downtime of machinery and support continuous improvements Support machine and process improvement projects Conducting mechanical and electrical maintenance Provide technical advice and support to team members and apprentices Maintain machine equipment and organise spare parts stock effectively Adhere to company standards and policies including health & safety, quality, and compliance Qualifications / Training required for this Maintenance Engineer: Level 3 qualifications in engineering Completion of an engineering apprenticeship Salary & Benefits Starting salary in the region of £51,000 Overtime opportunities which are paid at a premium Bonus scheme If you're ready to take the next step in your career as a Maintenance Engineer, apply now and join one of Nuneaton's leading manufacturers committed to excellence, innovation, and employee development. ASC Connections Ltd acts as an employment business for temporary positions and an employment agency for permanent positions. We are committed to equal opportunity and diversity

This Process Improvement Engineer position is days-based Monday-Friday, company car, £55,000 plus 18% bonus, and offers training and career development with an international market leader in their field. Within the position you will be provided with the opportunity to utilise your engineering experience and knowledge to identify and improve machinery, equipment and manufacturing lines. What's in it for you as Process Improvement Engineer £55,000 basic salary plus 18% Bonus Pension match up to 10% Location - Hinckley/Coalville area Company Car with fuel card Days based position Monday to Friday Extensive training and career development programmes The opportunity to work with a team of highly skilled technicians across maintenance and project engineering activities Key Responsibilities of Process Improvement Engineer Travel across the region to provide support to each of the group's manufacturing sites. Provide 'hands-on' technical support and expertise and drive Plant Operational Improvement as part of the Group Engineering function. Support the development of the Reliability Centred Maintenance Strategy by supporting criticality assessments and drive towards condition-based monitoring Enhance plant reliability by applying modern maintenance strategies and continuous improvement techniques. Support new and innovative process automation initiatives. I would love to speak to anyone who has any of the following Previous experience as Maintenance Engineer from either an electrical or mechanical background A Mechanical / Electrical Apprenticeship, NVQ Level 3 Engineering or City & Guilds Level 3, BTEC Level 3 in Engineering or equivalent Naric / Enic Conversion Ability to trouble shoot & repair manufacturing plant equipment & machinery Previous experience within Mechanical or Electrical Maintenance within industrial manufacturing plant environments

Maintenance Engineer (Mechanical Bias) £37,000 - £42,000 + Training + Days Only + Overtime + Yearly Bonus + Monthly Incentives + Company Social Events + Free On-Site Parking Hinckley Are you a Mechanically Biased Maintenance Engineer, who holds good electrical knowledge, looking to work for a global supplier? On offer is the opportunity to join a well-established, family run company, operating since 1983. They supply a wide range of traditional and next-generation refrigerants and associated products across the refrigeration, air-conditioning and automotive markets, with its products reaching customers across more than 40 countries. You will be responsible for carrying out planned and reactive maintenance across the site, responding to breakdowns, diagnosing faults and completing effective repairs. In specifics, you will work on pumps, motors, compressors and pipelines whilst also completing other general maintenance activities. The suitable candidate will have experience working as a mechanically biased Maintenance Engineer with solid electrical knowledge. The Role Install, maintain, and fault-find vehicle electrical systems and aftermarket accessories Carry out electrical testing and diagnostics using specialist equipment and OBD scanners Read and interpret wiring diagrams, technical manuals, and vehicle schematics Monday to Friday, 8 - 5, attending the head office each morning to collect parts Travelling to customers across Lancashire The Person Experience working as a Maintenance Engineer or similar Good mechanical skillset coupled with electrical knowledge Relevant engineering qualification If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. Reference Number: BBBH27310 Keywords: Maintenance Engineer, Maintenance Technician, Mechanical Maintenance Engineer, Multi-Skilled Maintenance Engineer, Engineering Maintenance, Manufacturing, Industrial Maintenance, Mechanical Engineering, Mechanical Maintenance, Fault Finding, Mechanical Fault Finding, Electrical Fault Finding, Pneumatic Systems, Pneumatics, Hydraulic Systems, Hydraulics, PPM, Planned Preventative Maintenance, Preventative Maintenance, Reactive Maintenance, Breakdown Maintenance, Breakdown Response, Machinery Maintenance, Equipment Maintenance, Machinery Installation, Machinery Modification, Hinckley, Leicester, Coventry We are an equal opportunity employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The remuneration offered will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website

Company description: GXO Logistics Supply Chain Inc. Job description: Are you an Engineer with experience in an industrial environment? Are you multi-skilled with an electrical bias and ability to turn your hand to anything that comes your way? Do you like the sound of a full-time, permanent role on a great site within a growing company? Here at GXO, we are currently looking for a Multi-Skilled Facilities Maintenance Engineer with an electrical bias, to join our cold store contract in Bedworth. As an Engineer you will be responsible for all preventative and reactive maintenance to ensure the site is operationally to full effect. This is a full time, permanent basis, working on a rotating shift pattern of; 07:00 – 15:00, 15:00 – 23:00, Monday to Friday with the possibility of being on call during peak periods and some weekend working required Pay, benefits and more: We're looking to offer a salary of up to £40,000.00 per annum and 33 days annual leave (inclusive of bank holidays). Your benefits package includes a company sponsored pension scheme, private medical & dental insurance, a 24/7 online GP service, life assurance and a fully comprehensive employee assistance programme. You'll also have access to our MyBenefits platform offering a variety of high street discounts, a cycle to work scheme, cashback cards, a saving scheme and much more! What you'll do on a typical day: Reactive and planned maintenance activities Maintain informative Engineering & Maintenance Records Notifying Management of spares necessary to maintain plant and equipment in safe working order Compliance with GXO systems and practices utilised within the Engineering Department Communication and liaison with other Departments and Managers/Team Leaders to enable priorities to be set The undertaking of such training that may be considered relevant and in turn train other employees Provide on-call cover out of hours and working such hours and shifts to provide cover to the site operations What you need to succeed at GXO: BS7671: 17th or 18th Edition Wiring Regs ONC, BTEC Level 3 or equivalent in engineering discipline (Electrical or Mechanical) IOSH Managing Safely 5 years' experience of working in industrial environment Experience working with 3 phase motors and control circuits Familiar with COSHH, LOLER & PUWER regs Knowledge of food safety and industrial refrigeration - advantageous We engineer faster, smarter, leaner supply chains. TPBN1_UKTJ