Arm jobs in Commack, New YorkCreate job alerts

Job Description Our client, an established manufacturing firm located in Melville, Long Island NY is looking for an experienced Vice President of Engineering. This role will lead the Engineering team in one of their key spaces. This role requires a leader with deep technical expertise in embedded systems. The ideal candidate will have experience successfully designing and delivering complex microprocessor-based electro-mechanical products and guiding them through regulatory certification and eventually into production. Responsibilities: • Provide strategic direction and hands-on technical leadership for microprocessor-based design, analog circuits and low frequency wireless Engineering disciplines., • Drive architecture decisions for embedded systems / ARM-based processors., • Oversee the design and development of control systems for electro-mechanical assemblies., • Establish Engineering best practices, design standards, and development methodologies., • Lead technical innovation while ensuring reliability, manufacturability, and cost-effectiveness., • Balance strategic leadership with hands-on technical design contribution., • Able to be hands-on and tackle complex design challenges with the team., • Guide products from concept through production., • Build, mentor, and lead a high-performing engineering team., • Foster a culture of technical excellence, innovation, and continuous improvement., • Manage departmental budgets, resources, and project timelines., • Collaborate cross-functionally with mechanical engineering, software, operations, and product management teams. Requirements: • Advanced degree (MS or PhD) in Electrical Engineering., • 15+ years of progressive experience in electrical engineering, • 5+ years in Senior Leadership roles., • Extensive hands-on experience with embedded system design and ARM processor architecture., • Proven track record managing hardware development teams., • Experience with IoT devices and connected or battery-powered systems., • Deep understanding of analog and digital circuit design, power electronics, and signal processing., • Knowledge of embedded firmware development in C/C++ for ARM-based micro-controllers a plus., • Proficiency with PCB design tools., • Strong understanding of communication protocols., • Direct experience managing UL certification processes for electrical products., • Proven track record navigating FCC compliance for electronic devices.

Job DescriptionDescription: Claims Specialist I is responsible for preparing, filing and following up on all FHA, USDA, VA, FNMA, FHLMC, VA, MI, and investor claims timely and accurately according to investor/insurer guidelines. They must perform all tasks associated with the claims process, from initial claims filing to final loan liquidation. The specialist is also responsible for ensuring proper adherence to Investor and Insurer policies, procedures, and timeframes in order to minimize risk, preserve and protect collateral, and limit loan related expenses. About Servbank: Founded in 1994, Servbank is a banking institution with local roots and national reach. We were built on a foundation of community-orientation, which ensures that no matter who we serve, we do so with the human touch that marks the gold standard of service. We work with individuals, businesses, and communities, so that whether you’re a student, a homeowner, a small business owner, or a community leader, we can help you fulfill your goals. Come create excellence with Servbank. Duties and Responsibilities • Prepare, submit, and track FHA, VA, USDA, FNMA, FHLMC, PMI, and investor claims accurately and within required timeframes., • Perform detailed loan-level reconciliations comparing amounts claimed, amounts paid, and outstanding indebtedness (including escrow and corporate advances)., • Prepare and submit supplemental claims as necessary, coordinating with foreclosure, loss mitigation, and bankruptcy teams to obtain required documentation., • Partner with the Escrow Department to verify taxes and insurance are maintained, paid timely, and canceled or endorsed in accordance with investor and insurer requirements., • Document all claim-related activity accurately and thoroughly within the Claims Pipeline Sharepoint., • Conduct timely audits of assigned claims to validate compliance and ensure claim accuracy and completeness., • Ensure loans are fully liquidated and cleared from MSP within 48 hours of receipt of final claim proceeds., • Perform additional duties as assigned by the Claims Department Supervisor or management.Requirements:, • Strong working knowledge of foreclosure and mortgage claims processes and workflows., • Demonstrated knowledge of FHA, USDA, VA, FNMA, FHLMC, MI, and other investor or insurer foreclosure and claims requirements., • General understanding of investor and PMI practices., • Solid understanding of residential mortgage products and consumer lending., • Functional knowledge of mortgage servicing, including default, escrow, payoff, cashiering, and ARM servicing. Skills and Abilities • Excellent written and verbal communication skills., • Proficiency in Microsoft Office applications, including Word and Excel, with strong data entry accuracy., • Effective negotiation and problem-solving skills., • Ability to work independently in a deadline-driven environment., • Detail-oriented and highly organized with a goal-oriented mindset. Education • Bachelor’s degree in a business-related field, or an equivalent combination of education and relevant experience in mortgage servicing, customer service, or a collections/call center environment. EEO Statement: We’re an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.

Job Description We are seeking a Quality Engineer to join our team! Responsibilities: • Create and improve automated systems and processes, • Perform first piece inspection, in-process inspection, final inspection, and incoming receiving inspection as required, • Help to Develop Quality Plans for specific jobs as required, • Utilize automated inspection equipment such as Hexagon Global CMM, Keyence Vision System, and Faro Arm to optimize inspection processes., • PC-DMIS programming to improve accuracy and efficiency in Automated quality checks., • Maintain a clean and safe work environment Qualifications: • Previous work experience in quality control., • Familiarity with CAD or other related software, • Strong attention to detail reading blueprints and checking parts to print., • Strong analytical and critical thinking skills, • Excellent written and verbal communication skills, • Knowledge of various inspection equipment such as calipers, micrometers, comparators, etc., • Document all technical procedures and user guides Company DescriptionWe are a family owned and operated contract precision machine shop. We have been part of the aerospace, defense, semiconductor and scientific instrumentation sectors for over 30 years and continue to grow.We are a family owned and operated contract precision machine shop. We have been part of the aerospace, defense, semiconductor and scientific instrumentation sectors for over 30 years and continue to grow.

Job DescriptionSUMMARY OF POSITION: Check-Mate Industries is seeking a skilled and dependable CNC Machinist to join our manufacturing team. This role is responsible for setting up and operating CNC milling machines to produce precision components that meet strict quality and performance standards. The ideal candidate will have hands-on machining experience, strong attention to detail, and the ability to work independently in a fast-paced production environment. ESSENTIAL FUNCTIONS: Includes, but may not be limited to the following, other duties maybe assigned based on departmental needs and company goals: • Set up and operate CNC milling machines for production runs, • Load and verify programs, set tool offsets, and perform first-piece inspections, • Interpret blueprints, technical drawings, and work instructions, • Utilize precision measuring instruments, including calipers, micrometers, and height gages, • Monitor machine performance and make necessary adjustments to maintain tolerances, • Ensure consistent product quality while minimizing scrap and rework, • Maintain a clean, organized, and safe work area, • Adhere to all company safety policies and procedures QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential function satisfactorily. Reasonable accommodation may be provided to enable a qualified individual with disabilities to perform the essential job functions. Education and Experience • High School Diploma or equivalent, supplemented by 3+ years of CNC mill experience KNOWLEDGE, SKILLS AND ABILITIES: • Proven ability to set up machines and run jobs independently, Haas, Makino, Doosan are a plus, • Proficient in reading blueprints and understanding tolerances, • Experience using standard inspection and measuring tools such as calipers, micrometers, gauges, indicators, optical comparators, and 3D scanning, • Strong attention to detail and commitment to quality, • Familiarity with ERP/MES systems, PLEX, IQMS are a plus, • Basic knowledge of CAD/CAM software, • Reliability and strong work ethic, • Attention to detail with a focus on efficiency, • Willingness to learn and continuously improve, • Effective communication and teamwork skills PHYSICAL REQUIREMENTS: While performing the duties of this Job, the employee is regularly required to stand, sit and walk for extended periods of time. Employees must be able to stand for long periods of time. The employee is occasionally required to stoop, reach overhead, lift and/or move up to 40 pounds. Tasks require manual dexterity, hand, arm, and finger dexterity to operate machine and other equipment. In addition, visual and hearing acuity; as well as identifying and distinguishing colors. ENVIRONMENTAL REQUIREMENTS: This role is based on the manufacturing shop floor within a high-volume production facility. While performing duties in designated production areas, the use of personal protective equipment (PPE) is required to ensure safety and compliance with workplace regulations. Powered by JazzHR iKiQtdEXiV

Job DescriptionSUMMARY OF POSITION: Check-Mate Industries is seeking an experienced Quality Manager to lead and elevate our quality systems in a high-volume manufacturing environment. This role is responsible for driving consistency, strengthening process control, and ensuring our quality infrastructure supports operational excellence as the business scales. The Quality Manager will work cross-functionally to improve performance, build accountability, and position quality as a competitive advantage. ESSENTIAL FUNCTIONS: Includes, but may not be limited to the following, other duties maybe assigned based on departmental needs and company goals: Quality Performance • Drive measurable improvement in key metrics, including scrap, rework, customer quality performance, and cost of poor quality, • Establish clear visibility, ownership, and accountability for quality KPIs across the organization Process Control & Continuous Improvement, • Strengthen process control and inspection discipline across operations, • Improve consistency across shifts, machines, and product lines, • Leverage data, including SPC and trend analysis, to drive informed decision-making Corrective Action & Issue Resolution, • Lead structured root cause analysis and corrective action processes (CAPA), • Ensure timely resolution of quality issues and validate long-term effectiveness, • Identify trends and proactively drive continuous improvement initiatives Quality Management System (QMS), • Maintain and continuously improve the ISO 9001 Quality Management System, • Support certification efforts and readiness for ISO 13485, as applicable, • Ensure procedures are practical, followed, and aligned with operational needs Supplier Quality, • Strengthen incoming inspection and supplier quality processes, • Support supplier performance monitoring and continuous improvement efforts Team Leadership, • Lead, coach, and develop quality engineers, technicians, and inspectors, • Foster a culture of accountability, responsiveness, and continuous improvement, • Partner closely with operations to align quality objectives with production goals QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential function satisfactorily. Reasonable accommodation may be provided to enable a qualified individual with disabilities to perform the essential job functions. Education and Experience • Associate degree in Engineering, Manufacturing, Quality, or a related technical field required; Bachelor’s degree preferred supplemented with 7–10+ years of experience in manufacturing quality, with increasing responsibility; 3–5+ years of leadership experience in a production environmentKNOWLEDGE, SKILLS AND ABILITIES:, • Experience with ISO 9001 required; ISO 13485 experience preferred, • ERP system experience (PLEX preferred), • Strong expertise in:, • PFMEA, Control Plans, PPAP/FAI, • Root cause analysis and CAPA methodologies, • SPC and process capability analysis, • Hands-on and highly visible on the shop floor, • Data-driven and results-oriented, • Clear, consistent, and accountable in leadership approach, • Focused on building scalable, sustainable systems PHYSICAL REQUIREMENTS: While performing the duties of this Job, the employee is regularly required to stand, sit and walk for extended periods of time. Employees must be able to sit and stand for long periods of time. The employee is occasionally required to stoop, reach overhead, lift and/or move up to 40 pounds. Tasks require manual dexterity, hand, arm, and finger dexterity to operate computer keyboard and other equipment. In addition to visual and hearing acuity; as well as identifying and distinguishing colors. ENVIRONMENTAL REQUIREMENTS: This role involves working both on the shop floor and in the office within a high-volume manufacturing facility. While performing duties in designated production areas, the use of personal protective equipment (PPE) is required to ensure safety and compliance with workplace regulations. Additionally, the position may require occasional travel, typically less than 10% of the time. Powered by JazzHR XVX91rUrEL

Job Description Location: Smithtown NY Compensation: $140,000–$155,000 base salary + 8% bonus plan The Opportunity Join a growing engineering team building embedded electronic products that support emergency response vehicles and first responders. As a Tech Lead Electrical Engineer, you'll own the design and development of embedded hardware—from concept through production—while leading technical decisions and mentoring a small team of engineers. This is an opportunity to shape multiple greenfield embedded systems products in a company actively integrating wireless networking and advanced electronics into mission-critical vehicle technology. Why You'll Love This Role • Lead from the front — own electrical architecture, embedded hardware development, and technical direction., • Build products that matter — develop systems used in emergency response and field-critical environments., • High-impact visibility — work across mechanical, software, manufacturing, and product teams to bring products to market., • Greenfield innovation — contribute to multiple new product initiatives in a growing engineering organization., • Strong business momentum — join a company performing well, with bonus payouts historically exceeding target. Your Day-to-Day, • Lead the design and development of embedded electronic systems for products including vehicle lighting, pressure governors, sensors, and control modules., • Drive hardware development including schematic design, PCB layout, functional testing, and system-level validation., • Define electrical architectures, select components (microcontrollers, sensors, drivers, wireless modules), and ensure performance, manufacturability, and regulatory compliance., • Provide day-to-day technical leadership and mentorship to a team of 2–3 engineers., • Collaborate cross-functionally with mechanical engineering, software, manufacturing, and product management teams to deliver reliable, field-ready products., • Manage engineering priorities, schedules, and resource planning to keep development on track., • Support product testing, validation, and transition into manufacturing., • Improve engineering processes, documentation, specifications, and hardware design standards., • Develop and maintain hardware component specifications, system-level requirements, and functional test plans., • Champion engineering best practices and continuous improvement across the team. What We're Looking For, • Strong expertise in microcontroller-based hardware design (ARM processor families preferred)., • Deep understanding of EMC / EMI-compliant electronic design., • Hands-on experience with schematic capture and PCB layout tools such as Altium., • Experience leading, mentoring, or guiding engineers in a technical team environment., • Strong understanding of communication protocols including CAN, I2C, SPI, and UART., • Experience with embedded wireless technologies such as Wi-Fi, Bluetooth, Cellular, or LoRa is a plus., • Strong troubleshooting and problem-solving skills with the ability to work cross-functionally., • Experience using lab and test equipment including oscilloscopes, multimeters, and signal generators., • Hands-on laboratory testing, debugging, and validation experience., • Must be a U.S. Citizen or Green Card holder. Ready to Apply? If you're excited to lead embedded hardware development, mentor engineers, and help build next-generation technology for first responders, this is an opportunity to make a meaningful impact while growing with a high-performing engineering team.

Job Description Medical Assistant – Operating Room Support Groth Pain & Spine – Pain Management Sedation Center (Smithtown, NY) Join Our Growing Pain Management Team! This role is ideal for someone looking for flexible, as-needed hours while gaining hands-on experience in a fast-paced procedural setting. Schedule & Availability • Per diem, • Monday–Friday availability preferred, • Must be flexible based on procedural schedule Physical Requirements • Must have the ability to lift, reposition, and assist patients up to 250 lbs., • Ability to stand for extended periods in an active procedure room setting Ideal Candidate • Experience in an O.R. or procedure-based setting preferred (surgical techs, medical assistants, nurses, etc.), • Comfortable assisting with and maneuvering a fluoroscopy (C-arm) machine, • Calm under pressure, organized, and detail-oriented, • Team player with strong work ethic and flexibility, • Reliable, professional, and patient-focused Primary Location Groth Pain & Spine – Pain Management Sedation Center Smithtown, NY