Trabajos assembly manufacturing en Hicksville, New YorkCrear alertas

The Estée Lauder Companies Inc. is one of the world's leading manufacturers, marketers, and sellers of quality skin care, makeup, fragrance, and hair care products, and is a steward of luxury and prestige brands globally. The company's products are sold in approximately 150 countries and territories under brand names including: Estée Lauder, Aramis, Clinique, Lab Series, Origins, M·A·C, La Mer, Bobbi Brown Cosmetics, Aveda, Jo Malone London, Bumble and bumble, Darphin Paris, TOM FORD, Smashbox, AERIN Beauty, Le Labo, Editions de Parfums Frédéric Malle, GLAMGLOW, KILIAN PARIS, Too Faced, Dr.Jart+, the DECIEM family of brands, including The Ordinary and NIOD, and BALMAIN Beauty. Qualifications The Process Coordinator supports the Fill & Assembly leadership team in ensuring all production lines and their crews are working at optimum performance. Ability to crew the line properly and rotate the crew as specified by safety guidelines. Coordinate and execute the filling and assembly of products in a manner consistent with the manufacturing department's goals and objectives. Review and investigate variances at the end of the job, before the P.O. is TECO'd College degree preferred or High School diploma Communicate in English. Must have strong communication, problem solving, troubleshooting and multi-tasking skills. Display strong math skills (addition, subtraction, percentages, averages). Proficient computer skills. (SAP, TML, Office). Must be detail oriented. Demonstrated leadership and interpersonal skills. Lead the Line Team to achieve efficient Production Runs and Changeovers. Ability to lift 35 pounds. Required to have and maintain a good attendance record. Required to work in all Work centers in Production. Able to work overtime. Work with the Quality Specialists to ensure completeness and P.O. folder closure. Adhere to all SOP Guidelines and Golden Rules pertaining to Company Policies. Collaborate and work with Supporting Departments to meet our department goals. Able to perform other duties assigned (e.g taking attendance, etc). Description Environmental Health and Safety goals (At All Times) Key goal: Eliminate accidents. Mentor line personnel to support this goal. Ensure our environmental goals are being met. Complies with all prescribed Safety and GMP procedures. Mentor crew members to utilize proper ergonomic related equipment (Drum lifters) Proactively address or report any necessary safety related issues or concerns. Mentor crew members to follow all policies and procedures (recycling, PPE, etc.). Rotate all members of line according to work instructions for each job as required. Engage in site wide safety programs. Responsible for addressing any safety concerns to prevent work related injuries. Produce High Quality finished goods (At All Times) Key goal: Produce products that meet all quality expectations and eliminate rejections. Follow cGMP and corporate quality SOPs at all times. Accurately perform and document quality inspections required by assembly instructions. Ensure accuracy of components, both quantity and quality to start job and when returning components. Assign line tasks per productivity guidelines and communicate all quality instructions. When quality issues arise, communicate with QA management for batch information and proper actioning Initiate and follow up on potential QA holds and control stagnant inventory. Maintain a clean and orderly work area and adhere to all GMP and Regulatory Guidelines. Ensure all team members in assigned resources follow GMP compliance. Work with your off-shift counterparts to have any errors corrected in a timely fashion and following GDP guidelines. Efficiency Goals (80%) Key goal: Oversee Pack & Fill operations to maximize resource efficiency, ensure accurate documentation and system transactions, and deliver consistent production performance. Ensure accurate inputs, confirmations into SAP and investigate any inventory discrepancies and variances Monitor hopper and componentry levels with mechanics/TOs to manage and reduce scrap at end of run Responsible for performing final batch record review and all associated tasks completely and accurately with SOP and GDP guidelines Provide and communicate detailed cross over information during shift change to next shift. Proactively prepare for the next shift counterparts for a smooth shift hand-off and successful shift Proactively prepare for the next production runs to ensure smooth and faster changeovers Assist and train fellow co-workers and temporary employees. Maintain control of the Batch Records and their content to ensure compliance and timely approval Verify, monitor, and document line efficiency goals for each job as assigned. Accurately perform line clearance and assist with changeover process. Lead the Line team to achieve efficient Production Runs and Changeovers Record hourly counts and detailed downtime information in TML Continuous Improvement Goals (20%) Key goal: Use LEAN tools to solve daily efficiency issues Collaborate with Opex Engineers to provide insight into root cause analysis Actively participate and support facility and corporate Lean Manufacturing initiatives including but not limited to: Value Stream Mapping, and Kaizen events. * Be engaged with initiatives, projects and drive sustainability Pay Range: The anticipated hourly range for this position is $19.00 to $32.00. Exact hourly rate depends on several factors such as experience, skills, education, and budget. Hourly range may vary based on geographic location. In addition to hourly rate, this position may be eligible for an annual discretionary bonus, education, and budget. Salary range may vary based on geographic location. In addition to base salary, this position is eligible for participation in a highly competitive bonus program with the possibility for overachievement based on performance and company results. In addition, The Estée Lauder Companies offers a variety of benefits to eligible employees, including health insurance coverage (medical, dental, and vision insurance), wellness and family support programs, life and disability insurance, retirement savings plans, paid leave programs, education-related programs, paid holidays and vacation time, and many others. Many of these benefits are subsidized or fully paid for by the company. Equal Opportunity Employer: It is Company's policy not to discriminate against any employee or applicant for employment on the basis of race, color, creed, religion, national origin, ancestry, citizenship status, age, sex or gender (including pregnancy, childbirth and related medical conditions), gender identity or gender expression (including transgender status), sexual orientation, marital status, military service and veteran status, physical or mental disability, protected medical condition as defined by applicable state or local law, genetic information, or any other characteristic protected by applicable federal, state, or local laws and ordinances. The Company will endeavor to provide a reasonable accommodation consistent with the law to otherwise qualified employees and prospective employees with a disability and to employees and prospective employees with needs related to their religious observance or practices. Should you wish to apply for this position or any other position with the Company and you believe you require assistance to complete an application or participate in an interview, please contact USApplicantAccommodations@Estee.com Michigan Applicants: Persons with disabilities needing accommodations for employment must notify the company in writing of the need for an accommodation within 182 days after the date the person with a disability knew or reasonably should have known that an accommodation was needed. Philadelphia Applicants: Philadelphia's Fair Chance Hiring Law Rhode Island Applicants: The company is subject to chapters 29-38 of title 28 of the general laws of Rhode Island and is therefore covered by the state's workers' compensation law.

The Estée Lauder Companies Inc. is one of the world's leading manufacturers, marketers, and sellers of quality skin care, makeup, fragrance, and hair care products, and is a steward of luxury and prestige brands globally. The company's products are sold in approximately 150 countries and territories under brand names including: Estée Lauder, Aramis, Clinique, Lab Series, Origins, M·A·C, La Mer, Bobbi Brown Cosmetics, Aveda, Jo Malone London, Bumble and bumble, Darphin Paris, TOM FORD, Smashbox, AERIN Beauty, Le Labo, Editions de Parfums Frédéric Malle, GLAMGLOW, KILIAN PARIS, Too Faced, Dr.Jart+, the DECIEM family of brands, including The Ordinary and NIOD, and BALMAIN Beauty. Qualifications The Process Coordinator supports the Fill & Assembly leadership team in ensuring all production lines and their crews are working at optimum performance. Ability to crew the line properly and rotate the crew as specified by safety guidelines. Coordinate and execute the filling and assembly of products in a manner consistent with the manufacturing department's goals and objectives. Review and investigate variances at the end of the job, before the P.O. is TECO'd + College degree preferred or High School diploma + Communicate in English. + Must have strong communication, problem solving, troubleshooting and multi-tasking skills. + Display strong math skills (addition, subtraction, percentages, averages). + Proficient computer skills. (SAP, TML, Office). + Must be detail oriented. + Demonstrated leadership and interpersonal skills. + Lead the Line Team to achieve efficient Production Runs and Changeovers. + Ability to lift 35 pounds. + Required to have and maintain a good attendance record. + Required to work in all Work centers in Production. + Able to work overtime. + Work with the Quality Specialists to ensure completeness and P.O. folder closure. + Adhere to all SOP Guidelines and Golden Rules pertaining to Company Policies. + Collaborate and work with Supporting Departments to meet our department goals. + Able to perform other duties assigned (e.g taking attendance, etc). Description Environmental Health and Safety goals (At All Times) Key goal: Eliminate accidents. Mentor line personnel to support this goal. Ensure our environmental goals are being met. + Complies with all prescribed Safety and GMP procedures. + Mentor crew members to utilize proper ergonomic related equipment (Drum lifters) + Proactively address or report any necessary safety related issues or concerns. + Mentor crew members to follow all policies and procedures (recycling, PPE, etc.). + Rotate all members of line according to work instructions for each job as required. + Engage in site wide safety programs. + Responsible for addressing any safety concerns to prevent work related injuries. Produce High Quality finished goods (At All Times) Key goal: Produce products that meet all quality expectations and eliminate rejections. + Follow cGMP and corporate quality SOPs at all times. + Accurately perform and document quality inspections required by assembly instructions. + Ensure accuracy of components, both quantity and quality to start job and when returning components. + Assign line tasks per productivity guidelines and communicate all quality instructions. + When quality issues arise, communicate with QA management for batch information and proper actioning + Initiate and follow up on potential QA holds and control stagnant inventory. + Maintain a clean and orderly work area and adhere to all GMP and Regulatory Guidelines. + Ensure all team members in assigned resources follow GMP compliance. + Work with your off-shift counterparts to have any errors corrected in a timely fashion and following GDP guidelines. Efficiency Goals (80%) Key goal: Oversee Pack & Fill operations to maximize resource efficiency, ensure accurate documentation and system transactions, and deliver consistent production performance. + Ensure accurate inputs, confirmations into SAP and investigate any inventory discrepancies and variances + Monitor hopper and componentry levels with mechanics/TOs to manage and reduce scrap at end of run + Responsible for performing final batch record review and all associated tasks completely and accurately with SOP and GDP guidelines + Provide and communicate detailed cross over information during shift change to next shift. + Proactively prepare for the next shift counterparts for a smooth shift hand-off and successful shift + Proactively prepare for the next production runs to ensure smooth and faster changeovers + Assist and train fellow co-workers and temporary employees. + Maintain control of the Batch Records and their content to ensure compliance and timely approval + Verify, monitor, and document line efficiency goals for each job as assigned. + Accurately perform line clearance and assist with changeover process. + Lead the Line team to achieve efficient Production Runs and Changeovers + Record hourly counts and detailed downtime information in TML Continuous Improvement Goals (20%) Key goal: Use LEAN tools to solve daily efficiency issues + Collaborate with Opex Engineers to provide insight into root cause analysis + Actively participate and support facility and corporate Lean Manufacturing initiatives including but not limited to: Value Stream Mapping, and Kaizen events. + Be engaged with initiatives, projects and drive sustainability Pay Range: The anticipated hourly range for this position is $19.00 to $32.00. Exact hourly rate depends on several factors such as experience, skills, education, and budget. Hourly range may vary based on geographic location. In addition to hourly rate, this position may be eligible for an annual discretionary bonus, education, and budget. Salary range may vary based on geographic location. In addition to base salary, this position is eligible for participation in a highly competitive bonus program with the possibility for overachievement based on performance and company results. In addition, The Estée Lauder Companies offers a variety of benefits to eligible employees, including health insurance coverage (medical, dental, and vision insurance), wellness and family support programs, life and disability insurance, retirement savings plans, paid leave programs, education-related programs, paid holidays and vacation time, and many others. Many of these benefits are subsidized or fully paid for by the company. Equal Opportunity Employer: It is Company's policy not to discriminate against any employee or applicant for employment on the basis of race, color, creed, religion, national origin, ancestry, citizenship status, age, sex or gender (including pregnancy, childbirth and related medical conditions), gender identity or gender expression (including transgender status), sexual orientation, marital status, military service and veteran status, physical or mental disability, protected medical condition as defined by applicable state or local law, genetic information, or any other characteristic protected by applicable federal, state, or local laws and ordinances. The Company will endeavor to provide a reasonable accommodation consistent with the law to otherwise qualified employees and prospective employees with a disability and to employees and prospective employees with needs related to their religious observance or practices. Should you wish to apply for this position or any other position with the Company and you believe you require assistance to complete an application or participate in an interview, please contact USApplicantAccommodations@Estee.com Michigan Applicants: Persons with disabilities needing accommodations for employment must notify the company in writing of the need for an accommodation within 182 days after the date the person with a disability knew or reasonably should have known that an accommodation was needed. Philadelphia Applicants: Philadelphia's Fair Chance Hiring Law (https://www.phila.gov/media/20240326142036/V6-Fireball-Handout-fairchance-E-S.pdf) Rhode Island Applicants: The company is subject to chapters 29-38 of title 28 of the general laws of Rhode Island and is therefore covered by the state's workers' compensation law. Equal Opportunity Employer It is Company's policy not to discriminate against any employee or applicant for employment on the basis of race, color, creed, religion, national origin, ancestry, citizenship status, age, sex or gender (including pregnancy, childbirth and related medical conditions), gender identity or gender expression (including transgender status), sexual orientation, marital status, military service and veteran status, physical or mental disability, protected medical condition as defined by applicable state or local law, genetic information, or any other characteristic protected by applicable federal, state, or local laws and ordinances. The Company will endeavor to provide a reasonable accommodation consistent with the law to otherwise qualified employees and prospective employees with a disability and to employees and prospective employees with needs related to their religious observance or practices. Should you wish to apply for this position or any other position with the Company and you believe you require assistance to complete an application or participate in an interview, please contact USApplicantAccommodations@Estee.com.

The Estée Lauder Companies Inc. is one of the world's leading manufacturers, marketers, and sellers of quality skin care, makeup, fragrance, and hair care products, and is a steward of luxury and prestige brands globally. The company's products are sold in approximately 150 countries and territories under brand names including: Estée Lauder, Aramis, Clinique, Lab Series, Origins, M·A·C, La Mer, Bobbi Brown Cosmetics, Aveda, Jo Malone London, Bumble and bumble, Darphin Paris, TOM FORD, Smashbox, AERIN Beauty, Le Labo, Editions de Parfums Frédéric Malle, GLAMGLOW, KILIAN PARIS, Too Faced, Dr.Jart+, the DECIEM family of brands, including The Ordinary and NIOD, and BALMAIN Beauty. Qualifications + College degree preferred or High School diploma + Previous experience as Process Setup Attendant or Quality Auditor preferred. + Must be able to read, write and communicate in English. + Must have strong communication, problem solving, troubleshooting and multi-tasking skills. + Display strong math skills (addition, subtraction, percentages, averages). + Proficient computer skills. (SAP, TML, Office). + Must be detail oriented. + Demonstrated leadership and interpersonal skills. + Lead the Line Team to achieve efficient Production Runs and Changeovers. + Ability to lift 35 pounds. + Required to have and maintain a good attendance record. + Required to work in all Work centers in Production. + Able to work overtime. + Work with the Quality Specialists to ensure completeness and P.O. folder closure. + Adhere to all SOP Guidelines and Golden Rules pertaining to Company Policies. + Collaborate and work with Supporting Departments to meet our department goals. + Able to perform other duties assigned (e.g taking attendance, etc). Description Environmental Health and Safety goals (At All Times) Key goal: Eliminate accidents. Mentor line personnel to support this goal. Ensure our environmental goals are being met. + Complies with all prescribed Safety and GMP procedures. + Mentor crew members to utilize proper ergonomic related equipment (Drum lifters) + Proactively address or report any necessary safety related issues or concerns. + Mentor crew members to follow all policies and procedures (recycling, PPE, etc.). + Rotate all members of line according to work instructions for each job as required. + Engage in site wide safety programs. + Responsible for addressing any safety concerns to prevent work related injuries. Produce High Quality finished goods (At All Times) Key goal: Produce products that meet all quality expectations and eliminate rejections. + Follow cGMP and corporate quality SOPs at all times. + Accurately perform and document quality inspections required by assembly instructions. + Ensure accuracy of components, both quantity and quality to start job and when returning components. + Assign line tasks per productivity guidelines and communicate all quality instructions. + When quality issues arise, communicate with QA management for batch information and proper actioning + Initiate and follow up on potential QA holds and control stagnant inventory. + Maintain a clean and orderly work area and adhere to all GMP and Regulatory Guidelines. + Ensure all team members in assigned resources follow GMP compliance. + Work with your off-shift counterparts to have any errors corrected in a timely fashion and following GDP guidelines. Efficiency Goals (80%) Key goal: Oversee Pack & Fill operations to maximize resource efficiency, ensure accurate documentation and system transactions, and deliver consistent production performance. + Ensure accurate inputs, confirmations into SAP and investigate any inventory discrepancies and variances + Monitor hopper and componentry levels with mechanics/TOs to manage and reduce scrap at end of run + Responsible for performing final batch record review and all associated tasks completely and accurately with SOP and GDP guidelines + Provide and communicate detailed cross over information during shift change to next shift. + Proactively prepare for the next shift counterparts for a smooth shift hand-off and successful shift + Proactively prepare for the next production runs to ensure smooth and faster changeovers + Assist and train fellow co-workers and temporary employees. + Maintain control of the Batch Records and their content to ensure compliance and timely approval + Verify, monitor, and document line efficiency goals for each job as assigned. + Accurately perform line clearance and assist with changeover process. + Lead the Line team to achieve efficient Production Runs and Changeovers + Record hourly counts and detailed downtime information in TML Continuous Improvement Goals (20%) Key goal: Use LEAN tools to solve daily efficiency issues + Collaborate with Opex Engineers to provide insight into root cause analysis + Actively participate and support facility and corporate Lean Manufacturing initiatives including but not limited to: Value Stream Mapping, and Kaizen events. + Be engaged with initiatives, projects and drive sustainability Pay Range: The anticipated hourly range for this position is $19.00 to $32.00. Exact hourly rate depends on several factors such as experience, skills, education, and budget. Hourly range may vary based on geographic location. In addition to hourly rate, this position may be eligible for an annual discretionary bonus, education, and budget. Salary range may vary based on geographic location. In addition to base salary, this position is eligible for participation in a highly competitive bonus program with the possibility for overachievement based on performance and company results. In addition, The Estée Lauder Companies offers a variety of benefits to eligible employees, including health insurance coverage (medical, dental, and vision insurance), wellness and family support programs, life and disability insurance, retirement savings plans, paid leave programs, education-related programs, paid holidays and vacation time, and many others. Many of these benefits are subsidized or fully paid for by the company. Equal Opportunity Employer: It is Company's policy not to discriminate against any employee or applicant for employment on the basis of race, color, creed, religion, national origin, ancestry, citizenship status, age, sex or gender (including pregnancy, childbirth and related medical conditions), gender identity or gender expression (including transgender status), sexual orientation, marital status, military service and veteran status, physical or mental disability, protected medical condition as defined by applicable state or local law, genetic information, or any other characteristic protected by applicable federal, state, or local laws and ordinances. The Company will endeavor to provide a reasonable accommodation consistent with the law to otherwise qualified employees and prospective employees with a disability and to employees and prospective employees with needs related to their religious observance or practices. Should you wish to apply for this position or any other position with the Company and you believe you require assistance to complete an application or participate in an interview, please contact USApplicantAccommodations@Estee.com Michigan Applicants: Persons with disabilities needing accommodations for employment must notify the company in writing of the need for an accommodation within 182 days after the date the person with a disability knew or reasonably should have known that an accommodation was needed. Philadelphia Applicants: Philadelphia's Fair Chance Hiring Law (https://www.phila.gov/media/20240326142036/V6-Fireball-Handout-fairchance-E-S.pdf) Rhode Island Applicants: The company is subject to chapters 29-38 of title 28 of the general laws of Rhode Island and is therefore covered by the state's workers' compensation law. Equal Opportunity Employer It is Company's policy not to discriminate against any employee or applicant for employment on the basis of race, color, creed, religion, national origin, ancestry, citizenship status, age, sex or gender (including pregnancy, childbirth and related medical conditions), gender identity or gender expression (including transgender status), sexual orientation, marital status, military service and veteran status, physical or mental disability, protected medical condition as defined by applicable state or local law, genetic information, or any other characteristic protected by applicable federal, state, or local laws and ordinances. The Company will endeavor to provide a reasonable accommodation consistent with the law to otherwise qualified employees and prospective employees with a disability and to employees and prospective employees with needs related to their religious observance or practices. Should you wish to apply for this position or any other position with the Company and you believe you require assistance to complete an application or participate in an interview, please contact USApplicantAccommodations@Estee.com.

The Estée Lauder Companies Inc. is one of the world's leading manufacturers, marketers, and sellers of quality skin care, makeup, fragrance, and hair care products, and is a steward of luxury and prestige brands globally. The company's products are sold in approximately 150 countries and territories under brand names including: Estée Lauder, Aramis, Clinique, Lab Series, Origins, M• A• C, La Mer, Bobbi Brown Cosmetics, Aveda, Jo Malone London, Bumble and bumble, Darphin Paris, TOM FORD, Smashbox, AERIN Beauty, Le Labo, Editions de Parfums Frédéric Malle, GLAMGLOW, KILIAN PARIS, Too Faced, Dr.Jart+, the DECIEM family of brands, including The Ordinary and NIOD, and BALMAIN Beauty. Qualifications The Process Coordinator supports the Fill & Assembly leadership team in ensuring all production lines and their crews are working at optimum performance. Ability to crew the line properly and rotate the crew as specified by safety guidelines. Coordinate and execute the filling and assembly of products in a manner consistent with the manufacturing department's goals and objectives. Review and investigate variances at the end of the job, before the P.O. is TECO'd • College degree preferred or High School diploma, • Communicate in English., • Must have strong communication, problem solving, troubleshooting and multi-tasking skills., • Display strong math skills (addition, subtraction, percentages, averages)., • Proficient computer skills. (SAP, TML, Office)., • Must be detail oriented., • Demonstrated leadership and interpersonal skills., • Lead the Line Team to achieve efficient Production Runs and Changeovers., • Ability to lift 35 pounds., • Required to have and maintain a good attendance record., • Required to work in all Work centers in Production., • Able to work overtime., • Work with the Quality Specialists to ensure completeness and P.O. folder closure., • Adhere to all SOP Guidelines and Golden Rules pertaining to Company Policies., • Collaborate and work with Supporting Departments to meet our department goals., • Able to perform other duties assigned (e.g taking attendance, etc). Description Environmental Health and Safety goals (At All Times) Key goal: Eliminate accidents. Mentor line personnel to support this goal. Ensure our environmental goals are being met. • Complies with all prescribed Safety and GMP procedures., • Mentor crew members to utilize proper ergonomic related equipment (Drum lifters), • Proactively address or report any necessary safety related issues or concerns., • Mentor crew members to follow all policies and procedures (recycling, PPE, etc.)., • Rotate all members of line according to work instructions for each job as required., • Engage in site wide safety programs., • Responsible for addressing any safety concerns to prevent work related injuries. Produce High Quality finished goods (At All Times) Key goal: Produce products that meet all quality expectations and eliminate rejections. • Follow cGMP and corporate quality SOPs at all times., • Accurately perform and document quality inspections required by assembly instructions., • Ensure accuracy of components, both quantity and quality to start job and when returning components., • Assign line tasks per productivity guidelines and communicate all quality instructions., • When quality issues arise, communicate with QA management for batch information and proper actioning, • Initiate and follow up on potential QA holds and control stagnant inventory., • Maintain a clean and orderly work area and adhere to all GMP and Regulatory Guidelines., • Ensure all team members in assigned resources follow GMP compliance., • Work with your off-shift counterparts to have any errors corrected in a timely fashion and following GDP guidelines. Efficiency Goals (80%) Key goal: Oversee Pack & Fill operations to maximize resource efficiency, ensure accurate documentation and system transactions, and deliver consistent production performance. • Ensure accurate inputs, confirmations into SAP and investigate any inventory discrepancies and variances, • Monitor hopper and componentry levels with mechanics/TOs to manage and reduce scrap at end of run, • Responsible for performing final batch record review and all associated tasks completely and accurately with SOP and GDP guidelines, • Provide and communicate detailed cross over information during shift change to next shift., • Proactively prepare for the next shift counterparts for a smooth shift hand-off and successful shift, • Proactively prepare for the next production runs to ensure smooth and faster changeovers, • Assist and train fellow co-workers and temporary employees., • Maintain control of the Batch Records and their content to ensure compliance and timely approval, • Verify, monitor, and document line efficiency goals for each job as assigned., • Accurately perform line clearance and assist with changeover process., • Lead the Line team to achieve efficient Production Runs and Changeovers, • Record hourly counts and detailed downtime information in TML Continuous Improvement Goals (20%) Key goal: Use LEAN tools to solve daily efficiency issues • Collaborate with Opex Engineers to provide insight into root cause analysis, • Actively participate and support facility and corporate Lean Manufacturing initiatives including but not limited to: Value Stream Mapping, and Kaizen events., • Be engaged with initiatives, projects and drive sustainability Pay Range: The anticipated hourly range for this position is $19.00 to $32.00. Exact hourly rate depends on several factors such as experience, skills, education, and budget. Hourly range may vary based on geographic location. In addition to hourly rate, this position may be eligible for an annual discretionary bonus, education, and budget. Salary range may vary based on geographic location. In addition to base salary, this position is eligible for participation in a highly competitive bonus program with the possibility for overachievement based on performance and company results. In addition, The Estée Lauder Companies offers a variety of benefits to eligible employees, including health insurance coverage (medical, dental, and vision insurance), wellness and family support programs, life and disability insurance, retirement savings plans, paid leave programs, education-related programs, paid holidays and vacation time, and many others. Many of these benefits are subsidized or fully paid for by the company. Equal Opportunity Employer: It is Company's policy not to discriminate against any employee or applicant for employment on the basis of race, color, creed, religion, national origin, ancestry, citizenship status, age, sex or gender (including pregnancy, childbirth and related medical conditions), gender identity or gender expression (including transgender status), sexual orientation, marital status, military service and veteran status, physical or mental disability, protected medical condition as defined by applicable state or local law, genetic information, or any other characteristic protected by applicable federal, state, or local laws and ordinances. The Company will endeavor to provide a reasonable accommodation consistent with the law to otherwise qualified employees and prospective employees with a disability and to employees and prospective employees with needs related to their religious observance or practices. Should you wish to apply for this position or any other position with the Company and you believe you require assistance to complete an application or participate in an interview, please contact USApplicantAccommodations@Estee.com Michigan Applicants: Persons with disabilities needing accommodations for employment must notify the company in writing of the need for an accommodation within 182 days after the date the person with a disability knew or reasonably should have known that an accommodation was needed. Philadelphia Applicants: Philadelphia's Fair Chance Hiring Law Rhode Island Applicants: The company is subject to chapters 29-38 of title 28 of the general laws of Rhode Island and is therefore covered by the state's workers' compensation law.

Job DescriptionPosition Description: Help the manufacturing team assemble Genadyne UNO pumps as per customer orders Primary Objective: To assemble pumps and provide cross-functional support to warehouse, CSR and quality department to fulfill orders. Major Areas of Responsibility: • Assemble pumps, • Conduct quality inspection on assembled pumps, • Verify receiving items for pump assemblies, • Create records of pumps that are built, • Maintain appropriate pump parts and accessory storage and handling activities, • Coordinate with NPWT manager on incoming ordersRework, Repair/Service pumps as required Specific responsibilities (tasks): 1) create and manage pumps, PCBs, part numbers 2) Perform quality test on pumps 3) create and manage documentation of pumps assembled, reworked, repaired and serviced 4) Able to provide technical support to the customers/manager or R&D team as required Requirements Education: High School Graduate Abilities: • Ability to work independently, exhibit strong initiative, • Quick Learner, • Able to read and write in English, • Strong interpersonal skills – able to interact with all levels of management as well as customers if required, • Team player, assembly experience preferred Rate: $18.00/hr. Powered by JazzHR NqTEIZH512

Job Description Allied Maker builds lighting by hand as a practice. Every fixture that leaves our facility has been touched, tested, and finished by a person who understood what they were making and why it mattered. We're looking for someone who wants to be that person. The Work You'll assemble handcrafted lighting fixtures — pendants, sconces, chandeliers — from raw components to finished product. This is bench work. It requires patience, dexterity, attention to detail, and a genuine interest in making things correctly. You'll read technical drawings, work with hand tools and precision instruments, and interpret assembly specifications. You'll handle components that have been finished by our metal finishing team and are expected to protect that work through every stage of assembly. You'll work alongside a small team in a purpose-built shop floor where craft is taken seriously. As you develop, you'll take on more complex fixtures and contribute to how we refine our processes. There is a direct line between the quality of your work and the quality of what ships. What We're Looking For • Some hands-on experience: woodworking, metalworking, electronics, auto, fabrication, or similar. We care more about your relationship to making things than your resume., • Fine motor precision and comfort working at a bench for extended periods, • Ability to read and follow technical diagrams and assembly documentation, • High personal standard for finished quality — you notice when something is off, • Reliable, on-time, and self-directed once given clear instruction, • Curiosity about materials, process, and how things workCompensation & Benefits, • Above-market hourly pay, reviewed as your skills grow, • A real craft environment with varied, complex work, • Direct exposure to the full lifecycle of a luxury manufactured product, • A small team where your contribution is visible and valued, • A company that is growing, with room to grow with itWork Environment & Physical Requirements, • On-site at Allied Maker Studio in Glen Cove, NY, • Bench work in a purpose-built manufacturing environment, • Requires fine motor dexterity and ability to work at a bench for extended periods, • Closed-toe footwear required in shop areasAbout Allied Maker Allied Maker is an American design and manufacturing studio creating luxury-crafted lighting fixtures. Based in New York, each piece is made to order by a dedicated team of craftspeople, with a focus on authentic materials, refined form, and enduring quality. The studio operates at the intersection of design, engineering, and manufacturing. Ryden Rizzo leads product design and form. Lanette Rizzo leads design direction, production, and client strategy. Together, they set a standard where design integrity, engineering, and performance are inseparable. Allied Maker is widely specified by leading architects and designers and continues to expand its capabilities while maintaining a singular focus: deliver artisan-crafted, highly engineered, sophisticated yet simple lighting design solutions. Pay Range Hourly$32—$32 USD

Job Description Assembler 1st Shift Westbury, NY Essential Functions: Follows assigned manufacturing procedures to perform product assembly Reports non-conformances in products to Management Ensures the assigned bench is clean and organized May perform other tasks as required by the Company Qualifications: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the position. Must be dependable and responsible. Good Attendance is a MUST. Good hand dexterity and eye-hand coordination. Mechanical abilities are a strong plus for this position. Attention to details The Company will provide necessary training and certifications as required for the position upon hire. Work Environment This job takes place in a Manufacturing environment. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. Must be able to lift up to 50 pounds. Minimum weight of products is 5 pounds. Position Type/Expected Hours of Work Some flexibility in hours is allowed, but the employee must be available during the "core work hours of 7:00 AM. To 3:30 PM and must work 40 hours each week to maintain full-time status. Occasional evening and weekend work may be required as job duties demand. Required Education and Experience: H.S. Diploma or GED. Prior experience as a mechanical assembler is a strong plus or other job that requires mechanical abilities. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Job DescriptionDescription: Cox & Company solves the aerospace industry's most challenging ice protection and temperature control problems. For over 80 years Cox has worked with OEMs, Tier 1 and Tier 2 Suppliers, as well as all major modification and finishing centers throughout the world. From initial design concepts through aircraft integration and operation, our company provides the highest quality full-lifecycle support to our customers. Cox & Company, Inc. is looking for an outgoing individual who will specialize in the manufacturing precision of using composite material in the Autoclave Area. Requirements: • Perform vacuum bagging and related processes for fabrication and curing composite parts., • Clean and smooth molds, cores, and core boxes, and repair surface imperfections., • Assemble cores into lower sections of molds, to create mold assembly per work instructions., • Clean and maintain work area to ensure safe and efficient work environment., • De-molding cured parts, • Ensure compliance with company policies and safety regulations, • Document materials utilized in creating parts for traceability purposes., • Work to meet production goals and deadlines, • Using scanner for time/attendance/work traveler. Qualification and Education Requirements: • General knowledge of practices and procedures used to fabricate composite parts or similar is preferred., • Ability to read and correctly interpret instructions in English is a must., • Ability to use measuring instruments., • Ability to lift rolls of material., • Ability to use a computer, • High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. Benefits & Wages: • 401K, • Flex Scheduling, • Health, Dental and Vision, • Health Saving Account, • Life Insurance, • Disability Benefits, • Paid Vacation & Holidays Physical Requirements: • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • While performing the duties of this Job, the employee is regularly required to stand; use hands to finger, handle, or feel and reach with hands and arms. The employee must frequently lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. This position involves exposure to projects and contracts subject to the International Traffic in Arms Regulations (ITAR). As a result, only U.S. Citizens or Permanent Residents (Green Card holders) are eligible for employment in this role. Applicants must meet these requirements to be considered.

Job DescriptionDescription: Temperature Control Assembler Cox & Company, a leader in solving the aerospace industry's most challenging ice protection and temperature control problems, is seeking a dedicated and outgoing Electronics Assembler to join our Temperature Control Systems Department. With over 80 years of experience working with OEMs, Tier 1 and Tier 2 suppliers, and major modification and finishing centers worldwide, we pride ourselves on delivering high-quality, full-lifecycle support from initial design to aircraft integration and operation. This is an exciting opportunity to contribute to innovative aerospace solutions in a dynamic and collaborative environment. Key Responsibilities: • Assemble electronic subassemblies according to engineering specifications and work instructions, • Perform detailed inspections and testing of assembled components to ensure quality standards, • Collaborate with engineering and production teams to troubleshoot and resolve assembly issues, • Maintain a clean and organized work area, adhering to safety and quality protocols, • Document assembly processes and test results accurately in company systems, • Assist in the continuous improvement of assembly procedures and workflows Skills and Qualifications: • Proven experience in electronic assembly, preferably within aerospace or related industries, • Strong understanding of electronic components, wiring, and soldering techniques, • Excellent attention to detail and manual dexterity, • Ability to read and interpret technical drawings, schematics, and work instructions, • Good communication skills and a team-oriented attitude, • Ability to work in a fast-paced environment and meet production deadlines At Cox & Company, we foster a culture of innovation, teamwork, and continuous growth. We offer competitive benefits and opportunities for professional development, making it an ideal place to advance your career in aerospace manufacturing. Join us in delivering cutting-edge solutions that keep aircraft operating safely and efficiently worldwide. Requirements: • Assembles fabricated components to make subassemblies or assemblies for electrical or electronic systems using hand and electrical tools. Qualifications • To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience • High school diploma or general education degree (GED); or one to three years related experience and/or training., • Experience with Electro/Mechanical assemblies is a plus, • Experience with wire strippers, crimping tools, and soldering Proficiency Skills • Ability to follow detailed written and verbal instructions in English., • Ability to read and understand technical drawings (blueprints)., • Experience reading and following Manufacturing Procedures or Specifications to accurately complete job assemblies., • Ability to perform repetitive assembly operations., • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals., • Ability to apply common sense understanding to carry out simple one or two step instructions. Ability to deal with standardized situations with only occasional or no variables., • Ability to work with various small tools and parts., • Ability to use wire strippers, crimping tools, and soldering irons., • Has good reading vision, color discrimination, and the ability to speak clearly. Computer Skills • Ability to use basic file systems to navigate to and open drawings, and manufacturing procedures., • Using scanner for time/attendance/work traveler. Physical Requirements • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • While performing the duties of this Job, the employee is regularly required to sit; use hands to finger, handle, or feel and reach with hands and arms. The employee must frequently lift and/or move up to 40 pounds., • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus This position involves exposure to projects and contracts subject to the International Traffic in Arms Regulations (ITAR). As a result, only U.S. Citizens or Permanent Residents (Green Card holders) are eligible for employment in this role. Applicants must meet these requirements to be considered.

Location US-NY-Farmingdale Positions 1 Experience (Years) 1 Category Engineering At a Glance Legrand has an exciting opportunity for a Mechanical Engineer to join the Data Center Power and Control Team in Farmingdale, NY. The Mechanical Engineer is responsible for engineered-to-order (ETO) projects, utilizing various configurations of existing design platforms, ensuring that custom configurations of existing and new designs meet customer requirements and can be produced within cost constraints. What Will You Do? Manage and create manufacturing packages for custom-configured cabinet assemblies • Develop Bills of Material and setting component routings in ERP, • Evaluate customer requirements outlined in various sales documents, • Estimate engineering lead time required for all projects, • Create 3D CAD assembly files from existing CAD models of previously designed components and accessories, configured per customer requirements, • Design custom accessories in accordance with the EIA-310 standards, • Design manufacturing fixtures as defined by project requirements, • Create detailed part, weldment and assembly drawings and write and process ECNs, • Create complete product structures with routings for entire manufacturing package in ERP, • Interface directly with all areas of production to support the progress and completion of projects, • Support production team in troubleshooting issues, • Interface directly with regulatory agencies such as UL and assist in testing, • Other duties as assigned Education: B.S. in Mechanical Engineering is required. Experience: • 1+ year of experience in mechanical engineering is required, • Comprehensive knowledge of sheet metal-based product fabrication methods is preferred Skills/Knowledge/Abilities: • Excellent project management skills and demonstrated ability to make timely and effective decisions, handle multiple priorities and effectively delegate responsibilities to ensure high quality service is delivered on time and within budget is required., • Effective independent judgment is required to plan, prioritize and organize a diversified workload., • Strong computer skills (word processing, spreadsheet, presentation, e-mail and meeting management) are required; Solid Works is preferred., • Must be highly collaborative and able to work in a team-based environment to promote an environment that encourages cohesiveness, trust and open communication with team, peers and all business partners., • Must have excellent verbal and written communications skills and be able to communicate effectively across all levels of the organization. Must be an effective listener, able to maintain focus, extract necessary information and validate understanding of the information. About Legrand Legrand is the global specialist in electrical and digital building infrastructures. Our comprehensive offering of solutions for residential, commercial, and data center markets makes us a benchmark for customers worldwide. We harness technological and societal trends with lasting impacts on buildings with the purpose of improving life by transforming the spaces where people live, work, and meet with electrical and digital infrastructures and connected solutions that are simple, innovative, and sustainable. Legrand is a global, publicly traded company listed on the Euronext (Legrand SA EPA: LR). For more information, visit www.legrandgroup.com/en About Legrand North and Central America Legrand, North & Central America (LNCA) is a leader in the AV, Lighting & Controls, Electrical, and Data Center markets. LNCA offers comprehensive medical, dental, and vision coverage, as well as distinctive benefits like a high employer 401K match, paid time off (PTO) and holiday pay, short-term and long-term disability benefit plans, above-benchmark paid maternity and parental leave, bonus opportunities in accordance with the Company's incentive plans, paid time off to volunteer, and an active/growing Employee Resource Group network. For more information, visit legrand.us About Legrand's Data Center Power and Control Division The industry-leading brands of Approved Networks, Ortronics, Raritan, Server Technology, and Starline empower Legrand's Data, Power & Control to produce innovative solutions for data centers, building networks, and facility infrastructures. Our division designs, manufactures, and markets world-class products for a more productive and sustainable future. The exceptional reliability of our technologies results from decades of proven performance and a dedication to research and development. http://www.legrand.us http://www.youtube.com/legrandna http://www.linkedin.com/company/44580 http://twitter.com/legrandNA Equal Opportunity Employer

Job Description Allied Maker is seeking a dedicated Lighting Technician responsible for the precise assembly of lighting fixtures, ensuring each product meets quality, functional, and aesthetic standards before shipment. This hands-on production position requires consistency, care, and process discipline to succeed. Responsibilities: • Assemble lighting fixtures from components and sub-assemblies, • Perform basic electrical wiring following diagrams and instructions, • Install hardware, sockets, and structural elements accurately, • Inspect work for alignment, function, and finish quality, • Identify and flag issues before they move downstream, • Maintain a clean, organized, and safe workstation Qualifications: • Background in engineering, trade school, or hands-on technical work, • Experience in manufacturing, fabrication, or assembly, • Strong personal inclination toward building, fixing, or working with mechanical/electrical systems, • Attention to detail and process discipline, • Manual dexterity and quality ownership, • Reliability, focus, and receptiveness to feedback Growth Potential: This role is for individuals who take pride in hands-on work and want to develop technical skill over time. Growth is based on demonstrated consistency, quality, and understanding of the product. Opportunities for progression include: • Advancing to more complex fixture builds and higher-difficulty assemblies, • Developing deeper electrical and technical proficiency, • Taking on quality control responsibilities and self-inspection, • Supporting training and onboarding of new team members, • Expanding into specialized areas of production and quality control Team members who demonstrate they can take on increased responsibility will have the opportunity to play a larger role in the production process. Pay Range Hourly$25—$35 USD

Job DescriptionJob Title: Mechanical Technician Are you a hard-working individual, looking for the opportunity to carve out a successful career in an organization where the spirit of family, ethics, good business practice and hard work share equal billing? If so, our ANDI group of companies may be a good place for you to find your niche! We are committed to rewarding skill, perseverance and a positive attitude with opportunities for growth. We are a multi-faceted enterprise involved in Sales, Service, Training, Certification, Equipment Fabrication, Equipment Installation, Maintenance and Repairs. The focus industry is Hyperbaric Chambers and Support Equipment. Intrigued? Read on to learn more! Required Skill Set : Aptitude for mechanical assembly and repairs. Small motors, compressors, oxygen concentrators and refrigerated dryers are among our products. Training is provided but the basic skill set is mandatory. Position Responsibilities: The Mechanical Technician is responsible for assembling and servicing various small machinery such as compressors & oxygen concentrators including assembling gas manifolds and other pneumatic plumbing assemblies as trained and directed. • Ensures accuracy of information in the system and compliance with internal controls., • Confirms adequate inventory for the production schedule., • Capable of providing technical support on the equipment systems that have been mastered. Qualifications& Knowledge • High school diploma Minimum one year of experience as a mechanic or technician Basic computer skills and applications such as MS Excel, MS Word or Corel WordPerfect, e-mail app such as G-mail or Outlook. Ability to follow written instructions and directions Ability to use basic math and numbers, and to use a computer terminal, calculator, and telephone. Ability to multitask and pay attention to detail Ability to work under immediate supervision Ability to pass a drug test Ability to work hours mandated by management. Ability to identify mechanical parts and fittings (including plumbing fittings) products based on Material, size, class, grade, type, etc. after basic training. Ability to verbalize and/or document areas of deficiency with regard to manufacturing, inventory control, record keeping policies and procedures Ability to collect all data relative to a problematic situation and determine specifically what needs to be done to correct it. Ability to plan, and organize the work, determine priorities, meet deadlines and work under pressure and stress. Good problem solving skills * Has a Drivers License and Car for personal transport Conduct: Highly motivated, positive and enthusiastic Clean and Neat in appearance Good interpersonal skills, and good listener and communicator Process oriented Eagerness to learn Be a team player and always support the Company's goals Being punctual and reliable is a must. * No smoking

The Manager I Test Engineering is responsible for overseeing the testing processes and activities within the test engineering department. This position involves managing a team of test engineers and technicians, developing, and implementing test strategies, and ensuring that products meet quality and performance standards. The Manager I Test Engineering collaborates with cross-functional teams to improve testing methodologies and deliver high-quality products while meeting project timelines and budget constraints. (Electro Industries is owned and operated by Hubbell Incoporated but operates under the Electro Industries /Guagetech (EIG) name). Compensation will be based on experience and qualifications and will be discussed during the interview process. The salary range for this role is $120,000 - $140,000 annually and offers a competitive benefits package. #LI-KR1 • Every day at Hubbell is different and you'll contribute in many ways. On any given day, you'll make a difference by:, • Effectively coaching and professionally developing a team of Test Engineers/ Technicians that design and maintain electromechanical test fixtures utilizing hardware and software such as C#. Regularly updating training needs and establishing a program to keep the skills of the team current, regular, and effective., • Implementing and maintaining the quality requirements in the manufacturing/repair/testing process., • Designing and supervising the construction of fixtures, jigs used to test the functions of Printed Circuit Boards and the calibration of finished Power Meters used for measuring power quality and consumption., • The role requires knowledge of designing test fixtures that ulitize hardware and software (C#) to test functionality of PCB's and Meters with tools such Radian RD-20 and RD-23, Fluke 5080A Calibratior and similar electronic test equipment., • Implementing and maintaining the quality requirements in the manufacturing/repair/testing process., • Ensuring compliance with all safety, environmental and quality practices and procedures as outlined in organizational/departmental guidelines and SOPs as well as applicable federal, state, and local regulations., • Scheduling, assigning, and supervising/constructing work projects assigned to the Model Shop and Test Lab., • Coordinating the construction of stereolithography models to achieve maximum utilization of SLA equipment., • Interfacing and supporting offsite PCB vendors that are utilizing our test equipment when building PCB for EIG., • Selecting and scheduling machines and equipment for repairs or overhaul to maintain accuracy and reliability., • Maintaining records and files of test reports, programs for CNC, SLA models, time sheets, work sheets, vacation schedules, and all relevant information to maintain good records. Maintaining inventory of all tools and materials., • Bachelor's Degree in ElectricalEngineering with some Computer Science knowledge, • 6-10 years of experience in managing engineering in areas of electronic, electro mechanical fixtures, finishing, assembly, and testing environment (required), • Experience as a Supervisor or Foreman, • Ability to set up and operate all machine shop equipment., • A working knowledge of programming, set up, and running of CNC machinery, • Experience with software including C# and VB6, Python, Altium, Solidworks, CAD software., • Experience in building maintenance services and environmental training Hubbell Incorporated Hubbell creates critical infrastructure solutions that power our customers, communities, people and the planet. Our company is strategically aligned around enabling grid modernization and electrification. As more products plug in to an aging grid, Hubbell solutions enable the transition to a more reliable, resilient and efficient energy infrastructure. Founded in 1888 our innovation has made us a leading global manufacturer of high quality electrical and utility solutions enabling customers to operate critical infrastructure reliably and efficiently. The company operates in two segments. Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications and Hubbell Electrical Solutions (HES) are essential to managing power across a wide range of industries and applications. Our vertical market solutions can be applied to markets including Data Centers, Renewables, Commercial Buildings, Industrial, Telecom and Transportation. Supporting both of our business segments is our corporate and Hubbell Unified Business Solutions teams that provide consistent process, tools technologies across our businesses. We are committed to operating sustainably and ethically while promoting an inclusive and supportive culture for our people to grow and develop in their careers. Our employees proudly work and serve our communities from our headquarters in Shelton, CT, across the United States and around the globe. Hubbell Utility Solutions Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications. HUS provides the critical components that allow the grid to reliably transmit and distribute energy, as well as the communications and controls technologies to make the grid smarter and more flexible. Hubbell Incorporated, its subsidiaries and affiliates, is an EO Employer AA: M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender identity or any other protected class. The above summary of position responsibilities and requirements is not intended, and should not be construed, to be an exhaustive list of duties, skills, efforts, physical requirements, or working conditions associated with the position. It is intended to be an accurate reflection of those principal position elements essential for making decisions related to position performance, employee development, and compensation.

The Technician is responsible for advanced evaluation, troubleshooting, and component-level diagnosis of returned product. The duties also include troubleshooting of manufacturing fallout. This role reports to quality and acts as a technical escalation resource within manufacturing, supporting process control, corrective action, and continual improvement to improve product quality, yield, and customer satisfaction. #LI-TB1 Every day at Hubbell is different and you'll contribute in many ways. On any given day, you'll make a difference by: • Perform advanced component-level troubleshooting of returned products and in-process manufacturing failures. Consisting of display boards, power supplies, network cards and control boards using SMT and thru hole technologies., • Interpret and apply electrical schematics, PCB layouts, BOMs, and controlled manufacturing documents, • Conduct detailed failure analysis to determine root cause related to design, materials, assembly, or test processes, • Ensure all evaluations, repairs, and findings are accurately documented and traceable per ISO 9001, • Support Corrective and Preventive Action (CAPA) activities, • Collaborate cross-functionally to address nonconforming product, • Analyze defect data to identify trends and systemic risks, • Develop and maintain controlled troubleshooting procedures ISO 9001 Responsibilities • Support control of nonconforming outputs, • Participate in corrective action and verification of effectiveness, • Maintain objective evidence for audits and reviews, • Identify risks and opportunities and drive continual improvement, • Associate degree in Electronics or equivalent experience, • 3+ years troubleshooting in a manufacturing environment, • Component-level diagnostics and schematic expertise, • Experience in an ISO 9001-certified environment, • Advanced PCB troubleshooting (multilayer, SMT), • Analog, digital, and mixed-signal circuits, • Precision soldering and rework, • IPC-A-610 and IPC-7711/7721 knowledge, • Cross-functional work with Manufacturing, Quality, and Engineering, • Clear communication of technical findings Working Conditions • Manufacturing floor, • ESD-controlled work areas, • Regular use of microscopes, soldering tools and communication test software Compensation will be commensurate with experience and qualifications and will be discussed during the interview process. The salary range for this position is $67,400-$80,000. This position offers a competitive salary and comprehensive benefits package. Hubbell Incorporated Hubbell creates critical infrastructure solutions that power our customers, communities, people and the planet. Our company is strategically aligned around enabling grid modernization and electrification. As more products plug in to an aging grid, Hubbell solutions enable the transition to a more reliable, resilient and efficient energy infrastructure. Founded in 1888 our innovation has made us a leading global manufacturer of high quality electrical and utility solutions enabling customers to operate critical infrastructure reliably and efficiently. The company operates in two segments. Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications and Hubbell Electrical Solutions (HES) are essential to managing power across a wide range of industries and applications. Our vertical market solutions can be applied to markets including Data Centers, Renewables, Commercial Buildings, Industrial, Telecom and Transportation. Supporting both of our business segments is our corporate and Hubbell Unified Business Solutions teams that provide consistent process, tools technologies across our businesses. We are committed to operating sustainably and ethically while promoting an inclusive and supportive culture for our people to grow and develop in their careers. Our employees proudly work and serve our communities from our headquarters in Shelton, CT, across the United States and around the globe. Hubbell Utility Solutions Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications. HUS provides the critical components that allow the grid to reliably transmit and distribute energy, as well as the communications and controls technologies to make the grid smarter and more flexible. Hubbell Incorporated, its subsidiaries and affiliates, is an EO Employer AA: M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender identity or any other protected class. The above summary of position responsibilities and requirements is not intended, and should not be construed, to be an exhaustive list of duties, skills, efforts, physical requirements, or working conditions associated with the position. It is intended to be an accurate reflection of those principal position elements essential for making decisions related to position performance, employee development, and compensation.

The Manufacturing Engineer must have the ability to analyze problems and processes and offer solutions or work with senior engineers to implement solutions. Experience working with electronics, computers, automotive or robotics or similar technology field required. Compensation will be based on experience and qualifications and will be discussed during the interview process. The salary range for this role is $105,000 - $120,000 annually and offers a competitive benefits package. #LI-KR1 Every day at Hubbell is different and you'll contribute in many ways. On any given day, you'll make a difference by: • Assists in planning and designing processes for an electronics manufacturing facility ., • Maximizes efficiency by analyzing layout of equipment, workflow, assembly methods, and work force utilization in an electronic environment., • Daily tasks will involve working hand in hand with production in an Electronic Metering Production Department, • Determines the parts, equipment, and tools needed to achieve manufacturing goals according to product specifications., • Generates, reviews and updates work instructions and procedures as necessary to improve cycle times, cost and quality., • Works on projects/matters of limited complexity in a support role with other departments to assist in cost reduction and cycle time improvement., • Assists engineering with Prototype builds and creates all necessary documentation to transition product to production., • Assist production with ERP system (Netsuite/SAP) as necessary to ensure inventory and work orders are properly processed., • Bachelor's degree in manufacturing engineering/Mechanical Engineering or similar technical area., • 3-5 years' Experience in an electronics manufacturing environment where electrical testing of Printed Circuit boards and/or finished goods is performed, • Lean Six Sigma/5s Tools a Plus., • Experience with wiring, cable assemblies, PCB's, soldering and mechanical assembly of electronics strongly recommended., • Netsuite experience a plus, or ability to learn new software to assist production Hubbell Incorporated Hubbell creates critical infrastructure solutions that power our customers, communities, people and the planet. Our company is strategically aligned around enabling grid modernization and electrification. As more products plug in to an aging grid, Hubbell solutions enable the transition to a more reliable, resilient and efficient energy infrastructure. Founded in 1888 our innovation has made us a leading global manufacturer of high quality electrical and utility solutions enabling customers to operate critical infrastructure reliably and efficiently. The company operates in two segments. Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications and Hubbell Electrical Solutions (HES) are essential to managing power across a wide range of industries and applications. Our vertical market solutions can be applied to markets including Data Centers, Renewables, Commercial Buildings, Industrial, Telecom and Transportation. Supporting both of our business segments is our corporate and Hubbell Unified Business Solutions teams that provide consistent process, tools technologies across our businesses. We are committed to operating sustainably and ethically while promoting an inclusive and supportive culture for our people to grow and develop in their careers. Our employees proudly work and serve our communities from our headquarters in Shelton, CT, across the United States and around the globe. Hubbell Utility Solutions Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications. HUS provides the critical components that allow the grid to reliably transmit and distribute energy, as well as the communications and controls technologies to make the grid smarter and more flexible. Hubbell Incorporated, its subsidiaries and affiliates, is an EO Employer AA: M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender identity or any other protected class. The above summary of position responsibilities and requirements is not intended, and should not be construed, to be an exhaustive list of duties, skills, efforts, physical requirements, or working conditions associated with the position. It is intended to be an accurate reflection of those principal position elements essential for making decisions related to position performance, employee development, and compensation.

Job Description The Systems Engineer is the connective tissue between Allied Maker's teams and the tools they rely on: NetSuite, Autodesk Fusion, Wrike, the custom WMS, and the integrations that tie them together. This role goes beyond administration. The Systems Engineer is an integrator of design, planning, and operations, someone who understands how a fixture flows from design through shipping and builds systems that make that flow faster, cleaner, and more measurable. They refine workflows, build automations, and help leadership see team targets clearly. Key Responsibilities Platform Administration • Own day-to-day administration of NetSuite (items, BOMs, work orders, inventory, POs, reports, saved searches, roles), Autodesk Fusion / Fusion Manage, and Wrike, • Maintain user access, permissions, and licenses across platforms; manage onboarding/offboarding, • Ensure the custom WMS remains well-integrated with NetSuite and reflects physical operations accurately Integration & Automation • Build and maintain integrations between NetSuite, Fusion, Wrike, and the custom WMS, • Design automations (SuiteFlow/SuiteScript, Wrike automations, webhooks, scheduled jobs) to reduce manual handoffs, • Partner with Design, Manufacturing, and Operations to identify high-impact automation opportunities Workflow Design & Team Targets • Translate real-world workflow (design → engineering → vendor → receiving → finishing → assembly → ship) into system workflows and stage gates, • Build dashboards and reports that surface team targets, lead times, and bottlenecks, • Partner with department leads to refine status fields, definitions of done, and handoff protocols Reliability & Change Management • Document system configurations and changes; manage release processes for customizations, • Train teams on workflows and provide Tier-2 support for system issues, • Evaluate and implement new tools, modules, or integrationsRequired Qualifications, • Bachelor's degree in Systems Engineering, Industrial Engineering, Computer Science, or related field (or equivalent experience), • 3–5 years of experience administering and extending NetSuite in a manufacturing or inventory-driven environment, • Working knowledge of Autodesk Fusion / Fusion Manage and Wrike (or similar tools), • Proven ability to design workflows and build automations, • Familiarity with SQL, SuiteScript, or similar scripting tools, • Strong communication skills and ability to translate operational needs into system solutionsPreferred Qualifications, • NetSuite SuiteScript 2.x or Administrator certification, • Experience integrating a custom WMS with NetSuite, • Experience with iPaaS tools (Celigo, Workato, Boomi, Zapier), • Background in manufacturing or make-to-order environments, • Experience with BI tools (Looker, Tableau, Power BI)Compensation & Benefits, • Salary: $100,000 – $130,000 annually (based on experience), • Discretionary bonus, • Medical, dental, and vision insurance, • 401(k) with company match, • PTO, holidays, parental leave, • Employer-paid life and disability insurance, • Employee assistance program, • Safety shoe and eyewear allowance, • Employee discount on Allied Maker productsWork Environment & Physical Requirements, • On-site at the Glen Cove workshop, • Primarily office-based with frequent time on the shop floor, • Requires seated computer work with occasional light liftingAbout Allied Maker Allied Maker is an American design and manufacturing studio creating luxury-crafted lighting fixtures. Based in New York, each piece is made to order by a dedicated team of craftspeople, with a focus on authentic materials, refined form, and enduring quality. The studio operates at the intersection of design, engineering, and manufacturing. Ryden Rizzo leads product design and form. Lanette Rizzo leads design direction, production, and client strategy. Together, they set a standard where design integrity, engineering, and performance are inseparable. Allied Maker is widely specified by leading architects and designers and continues to expand its capabilities while maintaining a singular focus: deliver artisan-crafted, highly engineered, sophisticated yet simple lighting design solutions. Salary Range Annually$100,000—$130,000 USD

Process aircraft components from receiving to the final shipping of the parts after repair. Two years of similar or related work experience; shipping and receiving, similar manufacturing, cleaning and/or assembly line experience will be considered. This is not your typical Shipping and Receiving rol

Job Description The Pre-Production Coordinator is the central nervous system for the parts that build every Allied Maker fixture. Servicing the entire company from our core catalog of components, this role owns the accurate interpretation of bills of materials, the skilled pulling of parts from inventory, and the smooth handoff of those parts to downstream departments - metal finishing, glass, wood, electrical, assembly, and custom. It takes technical know-how, an eye for detail, and genuine discernment about parts and materials to do this job well. Key Responsibilities BOM Interpretation & Kit Preparation • Read and interpret bills of materials (BOMs) for standard collection fixtures and custom orders; identify every part required and resolve ambiguities with Design and Pre-Production II., • Pull parts from the central inventory in the correct quantities, verifying part numbers, revisions, and finish variants before release., • Stage parts for delivery to the correct department at the correct stage of production (machining, finishing, glass, wood, electrical, assembly, custom). Inventory Management in WMS • Work fluently inside Allied Maker's warehouse management system (WMS): receiving transactions, location moves, cycle counts, and issue-to-job transactions., • Maintain part-location accuracy and flag discrepancies between physical stock and system counts for resolution., • Keep bin locations organized, labeled, and logical so any team member can locate a part quickly. Technical Judgment • Use material and finish knowledge to distinguish visually similar parts (e.g., brass finishes, sister-SKU hardware, glass shapes) and catch mis-picks before they reach the floor., • Escalate quality concerns on pulled parts to the Quality Control Engineer rather than passing suspect material downstream., • Suggest improvements to bin layout, labeling, and pick routes based on day-to-day experience. Cross-Functional Coordination • Communicate daily with Procurement, Manufacturing, Assembly, and Custom teams about incoming work and stock positions., • Support new product introductions by staging parts for prototypes and first production runs.Required Qualifications, • 1–3 years of experience in warehousing, inventory, kitting, or light manufacturing., • Strong attention to detail and a discerning eye; able to tell very similar parts apart., • Comfortable working with computer-based inventory systems, scanners, and structured transactions., • Ability to read and understand a bill of materials and simple mechanical drawings., • Physically able to stand, walk, climb a ladder, and lift up to 40 lbs throughout the day., • Reliable, organized, and team-oriented; willing to be flexible as priorities shift.Preferred Qualifications, • Prior experience in custom manufacturing, lighting, furniture, or luxury goods., • Familiarity with NetSuite, WMS, or ERP-based inventory tools., • Working knowledge of metal finishes (brass, aluminum, plating), glass, and wood species., • Forklift or order-picker certification.Compensation & Benefits, • Base salary range: $55,000 – $70,000 annually (based on experience), • Annual discretionary bonus, • Medical, dental, and vision insurance, • 401(k) with company match, • Paid time off, holidays, and parental leave, • Employer-paid life and disability insurance, • Employee assistance program, • Safety shoes and prescription eyewear allowance, • Employee discount on Allied Maker productsWork Environment & Physical Requirements, • On-site at the Glen Cove, NY workshop, • Active shop-floor environment; safety glasses and closed-toe footwear required, • Requires standing, walking, reaching, climbing, and lifting up to 40 lbs regularlyAbout Allied Maker Allied Maker is an American design and manufacturing studio creating luxury-crafted lighting fixtures. Based in New York, each piece is made to order by a dedicated team of craftspeople, with a focus on authentic materials, refined form, and enduring quality. The studio operates at the intersection of design, engineering, and manufacturing. Ryden Rizzo leads product design and form. Lanette Rizzo leads design direction, production, and client strategy. Together, they set a standard where design integrity, engineering, and performance are inseparable. Allied Maker is widely specified by leading architects and designers and continues to expand its capabilities while maintaining a singular focus: deliver artisan-crafted, highly engineered, sophisticated yet simple lighting design solutions. Salary Range Annually$55,000—$70,000 USD

Job Description The Design Engineer translates creative direction into buildable fixtures. Working on both new collection development and bespoke custom orders, this role produces detailed CAD models, drawings, and documentation that our shop floor, vendors, and installers can all build from. The Design Engineer partners closely with the design studio on aesthetics, with the Manufacturing Engineer on producibility, and with the Assembly and Quality teams on how a fixture actually comes together and gets inspected. Key Responsibilities CAD & Technical Drawings • Create parametric 3D models and manufacturing drawings in Autodesk Fusion (or similar tools) for collection and custom fixtures., • Produce clean, dimensioned drawings with tolerances, finishes, and notes appropriate to the vendor or in-house process., • Develop BOMs and maintain part revisions in NetSuite with support from the Systems Engineer. New Product & Custom Development • Partner with the design studio from concept through production release: sketch review, massing studies, proportion and scale studies, and prototype iteration., • Specify materials and finishes in collaboration with Design, including glass, machined and spun metal, alabaster, and wood., • Lead prototype builds, capture lessons learned, and carry them into a clean production release. Manufacturability & Vendor Handoff • Review designs with the Manufacturing Engineer for manufacturability, tolerance stacks, and cost before release., • Issue drawing packages to vendors and answer technical questions through the Manufacturing Engineer., • Incorporate feedback from QC and Assembly into drawing updates and ECOs. Standards & Compliance • Design fixtures that meet UL 1598 / UL 8750 and relevant electrical and structural standards in collaboration with the Assembly Engineer., • Maintain design documentation and revision history in a disciplined way so that what's in the field matches what's in the system.Required Qualifications, • Bachelor's degree in Mechanical Engineering, Industrial Design Engineering, or a closely related field., • 3–5 years of design engineering experience producing production-ready drawings for manufactured products., • Strong CAD skills in Autodesk Fusion (Fusion 360) or a comparable parametric CAD tool, with GD&T proficiency., • Experience designing for multiple materials and processes: machining, metal spinning, casting, glass, and wood., • Ability to balance aesthetic intent with buildability; comfortable iterating with a design-led team., • Strong communication skills and organized documentation habits.Preferred Qualifications, • Experience designing lighting fixtures and familiarity with UL 1598 / UL 8750., • Experience with NetSuite item and BOM records., • Background in luxury goods, architectural hardware, or high-end furniture., • Exposure to rendering, photometric analysis, or thermal considerations for LEDs.Compensation & Benefits, • Base salary range: $90,000 – $115,000 annually (based on experience), • Discretionary annual performance bonus, • Medical, dental, and vision insurance, • 401(k) with company match, • Paid time off, holidays, and parental leave, • Employer-paid life and disability insurance, • Employee assistance program, • Safety shoes and prescription eyewear allowance, • Employee discount on Allied Maker productsWork Environment & Physical Requirements, • On-site at the Glen Cove, NY workshop; split between CAD work and time on the shop floor, • Occasional exposure to shop-floor conditions during builds and reviews, • Requires seated work with periodic standing and light lifting (up to 25 lbs)About Allied Maker Allied Maker is an American design and manufacturing studio creating luxury-crafted lighting fixtures. Based in New York, each piece is made to order by a dedicated team of craftspeople, with a focus on authentic materials, refined form, and enduring quality. The studio operates at the intersection of design, engineering, and manufacturing. Ryden Rizzo leads product design and form. Lanette Rizzo leads design direction, production, and client strategy. Together, they set a standard where design integrity, engineering, and performance are inseparable. Allied Maker is widely specified by leading architects and designers and continues to expand its capabilities while maintaining a singular focus: deliver artisan-crafted, highly engineered, sophisticated yet simple lighting design solutions. Salary Range Annually$90,000—$115,000 USD

Job Description The Assembly Engineer is dedicated to the Assembly department. This role designs and optimizes how Allied Maker fixtures are put together, ensures every assembler is trained to the right method, documents every meaningful change, and holds the line on UL compliance in both assembly and QC. The Assembly Engineer is the person who walks the bench every day, improves the work, and makes craft and consistency compatible at scale. Key Responsibilities Assembly Methods & Optimization • Study and optimize assembly methods across the fixture portfolio: sequence of operations, fixturing, tools, takt, and ergonomics., • Design and build bench fixtures, jigs, and tooling that make quality easier and throughput higher., • Drive continuous-improvement initiatives (Lean/Kaizen) to reduce cycle time, rework, and ergonomic risk without losing the hand-crafted feel. Documentation & Change Control • Own the library of assembly work instructions (clear, illustrated, and current) for every fixture., • Drive disciplined change control so that improvements and corrections are documented and rolled out cleanly. Training & Capability • Build and maintain a structured training program for assemblers, including onboarding, cross-training, and certification for critical operations., • Coach assemblers on new methods and verify competency when standards change., • Support new-product introductions with pilot builds and first-article training. UL Compliance in Assembly & QC • Maintain compliance with applicable UL standards (e.g., UL 1598, UL 8750) in assembly operations and in final QC inspection., • Serve as the primary internal point of contact for UL files, construction details, and field evaluations when required., • Partner with the Quality Control Engineer to ensure final inspection reliably catches anything that would compromise UL listing or customer quality.Required Qualifications, • Bachelor's degree in Mechanical, Industrial, or Manufacturing Engineering, or equivalent hands-on experience., • 3–5 years of manufacturing or assembly engineering experience in a discrete-manufacturing environment., • Proven experience authoring work instructions, building fixtures, and running structured training., • Working knowledge of UL standards for lighting (UL 1598 / UL 8750) or comparable safety-listed products., • Strong Lean/CI toolkit (5S, standard work, value-stream thinking, 5-Why/8D)., • A people-first posture: the ability to teach, coach, and earn trust with experienced assemblers.Preferred Qualifications, • Direct experience with UL lighting compliance, including maintenance of UL files., • CAD skills (Fusion or similar) for fixture design., • Prior work in lighting, luxury goods, or custom furniture manufacturing., • Lean / Six Sigma certification.Compensation & Benefits, • Base salary range: $85,000 – $110,000 annually, commensurate with experience., • Discretionary annual performance bonus., • Comprehensive medical, dental, and vision insurance., • 401(k) retirement plan with company match., • Paid time off, paid holidays, and paid parental leave., • Employer-paid life and disability insurance; employee assistance program., • Safety shoes and prescription safety eyewear allowance for shop-facing roles., • Employee discount on Allied Maker products.Work Environment & Physical Requirements, • On-site at the Glen Cove, NY workshop; significant daily time on the assembly floor with additional time at a desk for documentation and design., • Active shop-floor environment; safety glasses and closed-toe footwear required in designated areas., • Requires standing and walking for extended periods and occasional lifting up to 40 lbs when handling fixtures or tooling.About Allied Maker Allied Maker is an American design and manufacturing studio creating luxury-crafted lighting fixtures. Based in New York, each piece is made to order by a dedicated team of craftspeople, with a focus on authentic materials, refined form, and enduring quality. The studio operates at the intersection of design, engineering, and manufacturing. Ryden Rizzo leads product design and form. Lanette Rizzo leads design direction, production, and client strategy. Together, they set a standard where design integrity, engineering, and performance are inseparable. Allied Maker is widely specified by leading architects and designers and continues to expand its capabilities while maintaining a singular focus: deliver artisan-crafted, highly engineered, sophisticated yet simple lighting design solutions. Salary Range Annually$85,000—$110,000 USD

Job Description Pre-Production II is the dedicated kitting role for Assembly. This coordinator tracks work flowing out of metal finishing, anticipates what Assembly will need next, and builds complete, ready-to-build kits so assemblers can focus on building fixtures. This role is the critical link between finishing and the assembly bench, and its success is measured by how smoothly assembly runs. Key Responsibilities Kit Building for Assembly • Track parts as they come off metal finishing (plating, powder coat, hand polish, patina) and reconcile them to pending assembly orders, • Assemble complete kits per fixture BOM, including finished metal components, glass, wood, fasteners, and hardware, • Stage kits in the correct sequence and location for Assembly, with clear identification and any drawings or build notes included Electrical Components & Pre-Assemblies • Pull UL-listed electrical components (sockets, wire, strain reliefs, drivers, LED modules, transformers) per fixture specification and revision, • Build or stage required sub-assemblies (socket harnesses, pre-wired modules, canopy assemblies) to support assembly flow, • Confirm that electrical parts match the listed build and flag any substitutions before release Flow & Communication • Partner with metal finishing daily to understand timing and plan kitting accordingly, • Communicate shortages, damaged parts, or finish issues early to Pre-Production, Procurement, and Quality, • Support prototype and custom builds with one-off kitting as needed System & Record Keeping • Execute kitting transactions in WMS and NetSuite to maintain accurate part-to-job tracking and inventory, • Maintain clean, organized, and clearly labeled staging areasRequired Qualifications, • 2–4 years of experience in kitting, assembly support, or production material handling, • Ability to read and interpret BOMs and build lists, • Familiarity with basic electrical components used in lighting or similar products, • Strong attention to detail and ability to catch discrepancies before assembly, • Comfort working with ERP / WMS systems and scanners, • Ability to stand, walk, and lift up to 40 lbs throughout the shiftPreferred Qualifications, • Experience in lighting, electrical assembly, or UL-listed products, • Familiarity with UL 1598 / UL 8750 or general electrical standards, • Experience with NetSuite or similar systems, • Basic soldering or mechanical pre-assembly experienceCompensation & Benefits, • Salary: $60,000 – $75,000 annually (based on experience), • Eligible for discretionary annual bonus, • Medical, dental, and vision insurance, • 401(k) with company match, • Paid time off and holidays, • Employer-paid life and disability insurance, • Safety shoe and eyewear allowance, • Employee discount on Allied Maker productsWork Environment & Physical Requirements, • On-site at the Glen Cove workshop, • Primary work areas include kitting zones and staging lanes adjacent to assembly, • Active shop-floor environment; safety glasses and closed-toe footwear required, • Requires standing, walking, reaching, and repetitive handling of small parts, • Occasional lifting up to 40 lbsAbout Allied Maker Allied Maker is an American design and manufacturing studio creating luxury-crafted lighting fixtures. Based in New York, each piece is made to order by a dedicated team of craftspeople, with a focus on authentic materials, refined form, and enduring quality. The studio operates at the intersection of design, engineering, and manufacturing. Ryden Rizzo leads product design and form. Lanette Rizzo leads design direction, production, and client strategy. Together, they set a standard where design integrity, engineering, and performance are inseparable. Allied Maker is widely specified by leading architects and designers and continues to expand its capabilities while maintaining a singular focus: deliver artisan-crafted, highly engineered, sophisticated yet simple lighting design solutions. Salary Range Annually$60,000—$75,000 USD

Job DescriptionDescription: Aerospace Tool Designer Join our innovative aerospace engineering team as an Aerospace Tool Designer, where you will play a vital role in designing and developing essential tools that support the manufacturing and assembly of aircraft structural components. This position offers an exciting opportunity to contribute to the creation of high-precision tooling solutions that ensure quality and efficiency in aerospace production. Key Responsibilities: • Design, develop, and refine tools, jigs, fixtures, molds, and gauges used in aircraft manufacturing processes., • Support the entire tooling lifecycle, from initial concept and design reviews to procurement, production implementation, and documentation., • Collaborate with cross-functional teams to ensure tooling designs meet engineering specifications, safety standards, and production requirements., • Conduct design reviews and modify tooling based on feedback and testing results., • Maintain accurate documentation and configuration control for all tooling designs and revisions., • Assist in troubleshooting tooling issues during production and implement improvements as needed. Skills and Qualifications: • Strong understanding of manufacturing processes, materials, and aerospace standards in English., • Excellent problem-solving skills and attention to detail., • Ability to work collaboratively in a team environment and communicate effectively., • Knowledge of quality control and documentation procedures related to tooling. We foster a collaborative and innovative work environment that values continuous improvement and professional growth. Our company offers competitive benefits and opportunities to advance your career in the dynamic aerospace industry. Requirements: Key Responsibilities Tool Design & Modeling • Develop detailed 3D models and 2D drawings for a wide range of aerospace tooling, including assembly jigs, fixtures, molds, and gauges., • Design tooling solutions that support complex manufacturing and assembly challenges from concept through production., • Ensure all tooling designs comply with applicable engineering requirements, technical specifications, and company design standards. Software & Technology • Utilize CAD software such as Siemens NX, CATIA V5, and/or SolidWorks to create, modify, and maintain tooling designs., • Apply Geometric Dimensioning and Tolerancing (GD&T) principles to ensure accuracy, repeatability, and manufacturability., • Coordinate with internal manufacturing teams and external tooling vendors to support fabrication, validation, and delivery of tooling (experience working with proven external tool designers and manufacturers is a strong plus). Analysis, Quality & Compliance • Apply basic structural analysis principles and conduct research to validate tooling concepts and designs., • Ensure tooling meets quality, safety, ergonomic, and regulatory requirements., • Incorporate Design for Manufacturability (DFM) principles to ensure tools can be produced efficiently and cost-effectively., • Adhere to all company policies, safety standards, and applicable regulatory requirements. Project & Process Management • Manage the complete tooling design lifecycle, from concept development through release to production., • Participate in and lead design reviews; provide constructive feedback to peers and stakeholders., • Develop tooling usage instructions, maintenance plans, and evaluation criteria, including calibration and load-testing requirements., • Support methodization and standardization of tooling and processes to improve product quality and reduce manufacturing cycle times., • Collaboration & Communication, • Work closely with cross-functional teams including Engineering, Manufacturing, Operations, and Quality., • Communicate effectively with internal stakeholders and external vendors to ensure tooling requirements, schedules, and deliverables are met., • Demonstrate strong problem-solving skills, attention to detail, and clear written and verbal communication. Qualifications • Bachelor’s degree in Aerospace Engineering, Mechanical Engineering, Aeronautical Engineering, or a related field, with a minimum of four (4) years of aircraft tooling design experience., • In lieu of a degree, a minimum of eight (8) years of directly related aircraft tooling design experience., • Proven experience designing tooling for aerospace manufacturing or assembly environments is required. Safety Requirements • This position requires the use of approved safety footwear (ASTM F-2413 complaint) when accessing or working in production and workshop areas. This position involves exposure to projects and contracts subject to the International Traffic in Arms Regulations (ITAR). As a result, only U.S. Citizens or Permanent Residents (Green Card holders) are eligible for employment in this role. Applicants must meet these requirements to be considered.

Job Description Overview We are seeking a Manufacturing Engineer to support production operations for high-precision aerospace components. This role will focus on improving manufacturing processes, driving efficiency, and ensuring products meet strict aerospace quality and regulatory standards. Key Responsibilities • Develop, implement, and improve manufacturing processes for aerospace components and assemblies, • Drive continuous improvement initiatives focused on cost, quality, and production efficiency, • Create and maintain work instructions, process documentation, and standard operating procedures, • Collaborate with design engineering to ensure manufacturability (DFM/DFA), • Support new product introductions (NPI) from concept through full-scale production, • Troubleshoot production issues and implement corrective actions, • Work closely with quality teams to meet AS9100 and customer compliance requirements, • Identify and implement tooling, fixturing, and automation solutions, • Analyze production data and recommend process improvements Qualifications, • Bachelor's degree in Manufacturing Engineering, Mechanical Engineering, or related field, • 3-7+ years of manufacturing engineering experience (aerospace preferred), • Experience in machining, assembly, or fabrication environments, • Familiarity with lean manufacturing, Six Sigma, or continuous improvement methodologies, • Knowledge of GD&T and engineering drawings, • Experience working within AS9100 or similar regulated environments, • Strong problem-solving and cross-functional communication skills Pay Details: $90,000.00 to $130,000.00 per year Search managed by: Andrew Khanija Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.lhh.com/us/en/candidate-privacy The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance OrdinanceMassachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job Description The Sr. Manager, IoTMS Operations leads all operational activities within KORE’s Westbury, NY IoT device configuration and production facility, overseeing production, quality, inventory, logistics, engineering coordination, and continuous improvement initiatives. This role is responsible for ensuring efficient, scalable, and customer-focused operations that deliver high-quality configured IoT devices on time and within budget. The Sr. Manager, IoTMS Operations drives operational excellence across device staging, firmware loading, provisioning, testing, kitting, packaging, and fulfillment processes while supporting rapid growth, evolving customer requirements, and technology integration. CORE ACCOUNTABILITIES Operational Leadership • Direct and oversee daily operations of the IoT device configuration and fulfillment facility., • Develop operational strategies to improve efficiency, scalability, quality, and profitability., • Establish and monitor operational KPIs, productivity goals, and service-level agreements (SLAs)., • Ensure production schedules and customer delivery commitments are consistently met., • Lead cross-functional coordination between operations, engineering, sales, procurement, customer success, and quality teams. Production & Configuration Management • Oversee all device configuration processes, including:, • Firmware loading and validation, • Device provisioning and activation, • SIM management, • Network and connectivity testing, • Customer-specific software/application configuration, • Serialization and asset tracking, • Optimize production workflows for throughput, accuracy, and traceability., • Implement scalable operational processes to support increasing order volumes and product diversity., • Ensure proper staffing, scheduling, and resource allocation across production operations. Quality & Compliance • Ensure adherence to quality standards and customer specifications throughout the production lifecycle., • Oversee quality assurance programs, inspection processes, and corrective action procedures., • Support compliance with:, • ISO 9001 or related quality systems, • ESD handling procedures, • Customer contractual requirements, • Regulatory and safety standards, • Review operational metrics and customer feedback to drive continuous quality improvement. Supply Chain & Inventory Oversight • Manage inventory control processes for devices, accessories, SIM cards, and production materials., • Coordinate with procurement and suppliers to maintain material availability and reduce shortages., • Improve inventory accuracy, warehouse organization, and material flow efficiency., • Oversee shipping, receiving, and fulfillment operations to ensure accurate and timely delivery. Financial & Strategic Management • Develop and manage operational budgets, labor planning, and cost-control initiatives., • Analyze operational performance data to identify trends, risks, and opportunities., • Support executive leadership with forecasting, capacity planning, and strategic growth initiatives., • Evaluate and implement automation technologies, software systems, and operational tools to improve scalability. Team Leadership & Development • Lead, mentor, and develop operations managers, supervisors, quality personnel, and production staff., • Foster a culture of accountability, collaboration, safety, and continuous improvement., • Establish training programs and operational standards for production teams., • Conduct performance reviews and succession planning for operational leadership roles. Process Improvement & Technology Integration • Lead Lean Manufacturing, Six Sigma, or continuous improvement initiatives., • Identify operational bottlenecks and implement process optimization strategies., • Collaborate with engineering and IT teams on: -MES/ERP system improvements -Automation initiatives -Production data collection -Traceability systems • Standardize workflows and documentation across production operations. QUALIFICATIONS Required Qualifications • Bachelor’s degree in Operations Management, Supply Chain, Manufacturing, Business Administration, or related field., • 7–10+ years of operations leadership experience in manufacturing, electronics, technology, or IoT environments., • Experience managing production operations with customer-specific configuration or assembly processes., • Strong knowledge of manufacturing operations, quality systems, and supply chain management., • Experience leading cross-functional operational teams in a fast-paced environment., • Proven track record of improving operational efficiency and scalability. Preferred Qualifications • Experience in IoT device manufacturing, device provisioning, telecommunications, or electronics configuration services., • Knowledge of: -Firmware deployment processes -Device lifecycle management -Cellular/network-connected devices -Serialization and traceability systems • Experience with ERP, MES, WMS, or production management systems., • Lean Manufacturing or Six Sigma certification preferred., • MBA or advanced operations/engineering degree is a plus. Key Skills -Operational strategy -Production management -Supply chain oversight -Quality systems management -Leadership and team development -Process optimization -Budget management -Data analysis and KPI management -Customer operations support -Continuous improvement -Change management OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. WORK ENVIRONMENT -Combination of office, warehouse, and production floor environments. -Frequent interaction with production staff, customers, suppliers, and executive leadership. -May require occasional travel to customer sites, suppliers, or partner facilities. -Fast-paced operational environment with evolving customer requirements and production priorities. WORKING CONDITIONS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to remain stationary; move; lift, push, pull and/or move up to 15 pounds. The employee must regularly sit; use hands to finger, handle, or feel; reach with hands and arms; communicate. Specific vision abilities required by this job include close vision. VISION To be the trusted global leader in IoT Connectivity Solutions for over 100,000,000+ connected devices, enabling a smarter, more connected world for all. MISSION To empower our customers to deliver transformative solutions that deliver impactful outcomes to the communities and customers they serve. KORE VALUES Customer Obsession We earn trust through deep understanding and relentless commitment. We earn the trust of our customers and aim to delight them through our solutions – we want to be loved by our customers. Be the Spark We lead with energy, creativity, and urgency. We don't wait for change – we ignite it. We listen, engage, and encourage others to participate. Own the Outcome We take accountability seriously – delivering on our promises to customers, teammates, and ourselves. We finish what we start. We think like owners and we’re frugal where it makes sense. Grit & Positivity We face challenges head-on – with resilience, optimism, and determination. We look at these situations as an opportunity to create a positive outcome. When we make a commitment, we deliver. We challenge those in a respectful way that do not meet their commitments. Challenge. Debate. But Be Human. We speak up, question assumptions, and challenge ideas – not people. We aim for the best outcomes through respectful, direct, and open dialogue, keeping in mind we’re all on the same team. KORE Wireless Group, Inc., is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of any kind. KORE is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at KORE are based on business needs, job requirements and individual qualifications, without regard to race, color, religion, or belief, national, social, or ethnic origin, sex (including pregnancy), age physical, mental or sensory disability, HIV Status, sexual orientation, gender identify and/or expression, marital, civil union, or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. KORE will not tolerate discrimination or harassment based on any of these characteristics.

Job Description The Quality Control Engineer owns incoming inspection and supplier quality for all parts, components, and sub-assemblies entering Allied Maker's production process. Working across materials including hand-blown glass, machined and spun metals, alabaster, and wood, this role defines quality standards, builds inspection systems, and partners with vendors to resolve issues at the root cause. This role is critical to maintaining the craft, consistency, and reliability expected from Allied Maker products. Key Responsibilities Incoming Inspection Across Materials • Develop inspection plans, sampling strategies, and acceptance standards for each material type, • Inspect glass for dimensional accuracy, clarity, inclusions, and color consistency, • Inspect machined/spun metals for dimensional conformance, wall thickness, and surface finish, • Evaluate alabaster for veining, translucency, and structural integrity, • Verify wood components for species, moisture content, joinery, and finish quality Supplier Quality & Vendor Development • Act as primary quality contact for vendors, • Lead root-cause analysis (8D, 5-Why, Fishbone) and corrective actions, • Qualify new suppliers and parts via First Article Inspection (FAI), • Track supplier performance (defects, responsiveness, quality consistency), • Conduct supplier audits and site visits Nonconformance & Continuous Improvement • Disposition nonconforming material (rework, RTV, scrap, use-as-is), • Lead cross-functional MRB decisions, • Analyze defect trends and cost of poor quality, • Drive improvements to reduce scrap, rework, and disruptions, • Partner with Assembly & Manufacturing Engineering on upstream improvements Standards & Documentation • Build and maintain inspection standards and boundary samples, • Create clear, repeatable inspection work instructions, • Maintain calibration of measurement tools and traceable records, • Ensure documentation is properly recorded in NetSuite and internal systems, • Support UL compliance by validating incoming componentsRequired Qualifications, • Bachelor's degree in Mechanical, Industrial, Materials, or Manufacturing Engineering (or equivalent experience), • 3–5 years of quality engineering experience in manufacturing or custom/luxury goods, • Strong ability to read engineering drawings and GD&T (ASME Y14.5), • Proficiency with precision measurement tools (calipers, micrometers, gauges, etc.), • Experience leading root-cause investigations and supplier corrective actions, • Ability to define and standardize subjective quality (visual / craftsmanship), • Strong communication skills with internal teams and external vendorsPreferred Qualifications, • Experience in lighting, luxury goods, architectural hardware, or custom furniture, • Familiarity with UL 1598 / UL 8750 standards, • ASQ certification (CQE, CQA) or Lean / Six Sigma, • Experience with natural materials (stone, glass, wood, alabaster), • Experience with NetSuite or similar systemsCompensation & Benefits, • Salary: $75,000 – $95,000 (based on experience), • Discretionary performance bonus, • Medical, dental, and vision insurance, • 401(k) with company match, • PTO, paid holidays, parental leave, • Employer-paid life and disability insurance, • Safety shoe & eyewear allowance, • Employee product discountWork Environment & Physical Requirements, • On-site in Glen Cove workshop, • Split between the inspection area, production floor, and desk work, • Exposure to shop environment (dust, finishes, moving equipment), • PPE required in designated areas, • Must be able to stand/walk for extended periods, • Lift up to 35 lbs and handle fragile materials, • Occasional travel to vendorsAbout Allied Maker Allied Maker is an American design and manufacturing studio creating luxury-crafted lighting fixtures. Based in New York, each piece is made to order by a dedicated team of craftspeople, with a focus on authentic materials, refined form, and enduring quality. The studio operates at the intersection of design, engineering, and manufacturing. Ryden Rizzo leads product design and form. Lanette Rizzo leads design direction, production, and client strategy. Together, they set a standard where design integrity, engineering, and performance are inseparable. Allied Maker is widely specified by leading architects and designers and continues to expand its capabilities while maintaining a singular focus: deliver artisan-crafted, highly engineered, sophisticated yet simple lighting design solutions. Salary Range Annually$75,000—$95,000 USD

Job Description The Manufacturing Engineer sits between Allied Maker's Design team and the outside world of partner vendors. When a tolerance doesn't behave, a finish won't hold, a material fights the process, or a vendor asks a question that could change the part, this is the person who answers, and then loops back to Design with the improvement. The Manufacturing Engineer is a hands-on problem solver whose work keeps fixtures buildable, beautiful, and on schedule. Key Responsibilities Vendor Technical Liaison • Serve as the primary technical contact between Design Engineering and partner vendors (machining, spinning, casting, glass, alabaster, wood), • Resolve vendor questions about tolerances, materials, finishes, and process capability while preserving design intent, • Support QC on supplier quality issues: investigate root cause, implement corrective actions, and verify effectiveness Design for Manufacturability (DFM) • Review designs with Design Engineering for manufacturability, tolerance realism, assembly fit, and cost before release, • Propose actionable design improvements to improve yield, cost, and schedule while maintaining design intent, • Maintain a library of DFM lessons learned Process & Tolerance Ownership • Own tolerance stack-up analysis on critical features, • Resolve conflicts between design intent and vendor capability, • Define inspection and acceptance criteria with QC, • Lead first-article reviews and process qualification for new vendors and parts Continuous Improvement • Partner with Assembly, Pre-Production, and Quality to resolve recurring issues from vendor parts or upstream design, • Track the cost of poor quality and lead-time impact from vendor issues and report trendsRequired Qualifications, • Bachelor's degree in Mechanical, Industrial, or Manufacturing Engineering, • 3–5 years of manufacturing engineering experience with vendor interaction, • Strong knowledge of machining, spinning, casting, and finishing processes, • Fluent in GD&T (ASME Y14.5), tolerance stack-ups, and process capability, • Strong communication skills across technical and non-technical stakeholders, • Organized, decisive, and able to own issues through resolutionPreferred Qualifications, • Experience in lighting, luxury goods, architectural hardware, or custom manufacturing, • CAD experience (Fusion or similar), • Familiarity with UL 1598 / UL 8750, • Lean / Six Sigma experience, • Experience working with Northeast US vendorsCompensation & Benefits, • Salary: $95,000 – $120,000 annually (based on experience), • Discretionary bonus, • Medical, dental, vision insurance, • 401(k) with company match, • PTO, holidays, parental leave, • Employer-paid life and disability insurance, • Employee assistance program, • Safety shoe and eyewear allowance, • Employee product discountWork Environment & Physical Requirements, • On-site at the Glen Cove workshop, • Mix of desk work, shop floor time, and vendor interaction, • Active shop environment; PPE required where applicable, • Occasional travel to vendor facilitiesAbout Allied Maker Allied Maker is an American design and manufacturing studio creating luxury-crafted lighting fixtures. Based in New York, each piece is made to order by a dedicated team of craftspeople, with a focus on authentic materials, refined form, and enduring quality. The studio operates at the intersection of design, engineering, and manufacturing. Ryden Rizzo leads product design and form. Lanette Rizzo leads design direction, production, and client strategy. Together, they set a standard where design integrity, engineering, and performance are inseparable. Allied Maker is widely specified by leading architects and designers and continues to expand its capabilities while maintaining a singular focus: deliver artisan-crafted, highly engineered, sophisticated yet simple lighting design solutions. Salary Range Annually$95,000—$120,000 USD

Job Description Superior Motion Controls designs, produces and delivers precision components and assemblies for defense and aerospace systems. We are seeking a highly experienced and hands-on Process and Quality Manager to oversee all aspects of our Quality Program including design and development, precision machining, assembly and test of electromechanical assemblies. This role is responsible for supervising and scheduling internal inspection personnel and interfacing with engineering and production management to ensure all work products (WIP and final components) meet requirements. The Process and Quality Manager will serve as the principal adviser to executive management on elements of the company’s Quality Management System and directly lead the company’s efforts to maintain all required certifications with respect to external standards (ISO9001:2015, AS9100, etc.). Key Responsibilities ▪ Oversee all aspects of the company’s Quality Program and the Inspection Department. ▪ Supervise and schedule the activities of all company quality inspectors ▪ Recruit and train Quality Inspectors to ensure adequate staffing to meet demand ▪ Achieve and maintain proficiency as a Quality Inspector ▪ Ensure all inspection tools and systems are calibrated on schedule as required and maintain appropriate documentation. ▪ Lead the Company through all required external quality audits (Standards based such as ISO 9001, AS9100 as well as any customer required) Requirements Qualifications ▪ Minimum 10 years experience in quality control, with at least 5 years in a leadership or management capacity; preferably in a precision machining/manufacturing environment ▪ Ability to read and interpret complex engineering drawings and GD&T ▪ Strong skills in coaching and developing inspectors with a range of experience levels ▪ Familiarity with lean manufacturing principles, ERP systems, and performance metrics ▪ Effective communicator with strong collaboration skills across departments

Own the daily manufacturing production schedule across all fulfillment and production areas (approx. We are seeking a hands-on Production Scheduler / Capacity Planner to manage daily scheduling and capacity across fulfillment and production operations, including chocolate molding, hand assembly, and

Goodwin Recruiting - - Responsibilities: Perform precision hand soldering of surface-mount and through-hole components to IPC Class 3 standards; Assemble and solder high-reliability printed circuit boards and sub-assemblies; Read and interpret assembly documents and engineering drawings; Operate so

Our team members are at the heart of everything we do.At Cencora, we are united in our responsibility to create healthier futures, and every person here is essential to us being able to deliver on that purpose.If you want to make a difference at the center of health, come join our innovative company

As part of the Wegmans manufacturing team, you will play an integral behind-the-scenes role to help keep the entire operation running smoothly.

Sam's Club | Medical, Dental, Vision, Rx + 401(k) with match + PTO + 100% Reimbursement of Tuition & Books | 965 Broadhollow Road | Responsibilities: Maintain and repair Walmart facilities, equipment, and assets using multiple craft skills (plumbing, electrical, carpentry, material handling equipmen

As a production worker at our bakeshop food manufacturing facility, you will be responsible for producing, assembling, and packaging the bakeshop products that stock our stores for our customers to enjoy, using equipment and machinery as necessary for the job.

Aerotek - - Responsibilities: Load, unload, and transport materials within the plant, yard, and designated work areas; Operate forklifts and other material handling equipment safely and efficiently; Use MRP system and WMS software to track inventory movement and update material records; Read work o

Applying for this role online is quick and easy you could even get a job offer in 10 minutes!.Provide some basic information to start the application process.Watch a short video to see what the job is like.Complete our online application process.Receive your job offer and schedule your first day of

Perform light mechanical assembly. Read and follow assembly drawings and technical procedures.

Applying for this role online is quick and easy you could even get a job offer in 10 minutes!.Provide some basic information to start the application process.Watch a short video to see what the job is like.Complete our online application process.Receive your job offer and schedule your first day of

Lockheed Martin - - Responsibilities: Assemble machined components and sheet metal parts using hand tools; Install mechanical hardware including helicoils, dowel pins, spring pins, PEM fasteners, rivnuts, and rivets; Read blueprints to guide assembly; Operate rivet tooling and sheet metal brakes (P

Experience as a senior technician or millwright in recycling, industrial maintenance, manufacturing, processing, aggregate, or material-handling environments.

Ludy Street - Responsibilities: Take direction from the supervisor to meet production demands while ensuring quality and safety standards; Follow HACCP principles and Good Manufacturing Practices; Keep work area clean and organized, following the 5 S program; Transfer carts of production in and out

Job Posting: 05/31/2026 Job Posting End: 06/28/2026 Job ID: R0282514 EARN A BONUS UP TO $500! Hiring immediately! As a production worker at our bakeshop food manufacturing facility, you will be responsible for producing, assembling, and packaging the bakeshop products that stock our stores for our

Nesco Resource - - Responsibilities: Perform vacuum bagging and related processes for fabrication and curing composite parts; Clean and smooth molds, cores, and core boxes, and repair surface imperfections; Assemble cores into lower sections of molds, to create mold assembly per work instructions;

At TJX Companies, every day brings new opportunities for growth, exploration, and achievement.You'll be part of our vibrant team that embraces diversity, fosters collaboration, and prioritizes your development.Whether you're working in our four global Home Offices, Distribution Centers or Retail Sto

Goodwin Recruiting - - Responsibilities: Assemble wiring and solder electronic components; Solder surface mount components; Follow drawings, schematics and work instructions; Work under a microscope; Assist with production tasks as needed.

As a Warehouse Associate you will be responsible for performing warehouse tasks including receiving, picking, packing, shipping, wire cutting, light assembly, as well as general maintenance of assigned areas.