Trabajos assembly manufacturing en Buffalo, New YorkCrear alertas

Job DescriptionCompany Description With more than 100 years of experience, Sika is a worldwide innovation and sustainability leader in the development and production of systems and products for commercial and residential construction, as well as the transportation, marine, automotive, and renewable energy manufacturing industries. Sika is a specialty chemicals company with a globally leading position in the development and production of systems and products for bonding, sealing, damping, reinforcing, and protection in the building sector and industry. Sika has subsidiaries in 103 countries around the world, produces in over 400 factories, and develops innovative technologies for customers worldwide. In doing so, it plays a crucial role in enabling the transformation of the construction and transportation industries toward greater environmental compatibility. Approximately 33,000 employees generated CHF 11.20 billion in sales in 2025. Job Description Watson Bowman Acme, a Sika company, is a manufacturer and supplier of expansion joint solutions for the transportation sector, including bridge and highway fabrication, preservation, and tunnels. This position is responsible for assisting Welding Fitters, Master Fitters, Forepersons, and Manufacturing Supervision staff as directed in the manufacture and assembly of metallic products supplied to the construction industry. More specifically, assist in fitting sub-assemblies as instructed, including but not limited to, tie downs, straightening, grinding, and stud welding on strip seal steel rails, using hand tools, overhead cranes, and welding equipment. Attention to safety and quality is essential to this position. Salary Range: $24 - $27 an hour based on education, experience, and qualifications of the applicant. This is a night shift position; 4-10 hour shifts Monday-Thursday. Work hours are typically 5:30pm - 4:00am. Qualifications • High school diploma or equivalency required, additional course work with emphasis on welding preferred., • Ability to read and understand shop drawings and other written instructions., • Use of hand tools and basic TIG and GMAW welding., • Comply with all safety regulations, including Safe Work Permits, training requirements, and use of safety equipment., • Must be able to lift and manage material of up to 50 pounds unassisted; walk or stand for long periods of time; bend, stoop, or kneel if required; wear all required PPE., • Possess the legal right to work and remain in the United States without sponsorship. Additional Information • 401k with Generous Company Match, • Bonuses, • Medical, Dental, and Vision Benefits, • Paid Parental Leave, • Life Insurance, • Disability Insurance, • Paid time off, paid holidays, • Floating holidays + Paid Volunteer Time, • Wellness/Fitness Reimbursements, • Education Assistance, • Professional Development Opportunities We offer competitive salaries, aligned with local market benchmarks and the specific scope and responsibilities of each role. Compensation is determined based skills relevant to the position, education and/or training. We are committed to fair and equitable pay practices in accordance with applicable laws and regulations.

Job Description Daily Responsibilities: • Work detail drawings fit-up piece parts in fixturing fit, tack and weld piece parts according to detail drawings with components consisting of steel channels, brackets, angles, sheathing, assemblies and sub-assemblies., • Tack welds all parts together in equipment, ensuring all dimensions are correct to specified drawings., • Weld complete assembly according to specified welding standards., • Correct fabrication mistakes., • Incorporate approved design changes where necessary., • Fabricate shop fixtures as required by assembly personnel per engineering sketch., • Meet production schedule, quality and planned labor hours with limited supervision., • Utilization of hand and power shop tools., • Understand and apply minimally these forms of welding, carbon steel, stainless steel, low alloy., • Normally receives basic instructions on routine tasks and detailed instructions on new assignments., • Read blueprints and drawings and take or read measurements to plan layout and procedures, • Determine the appropriate welding equipment or method based on requirements, • Set up components for welding according to specifications (e.g. cut material with powered saws to match measurements), • Operate angle grinders to prepare the parts that must be welded, • Align components using calipers, rulers etc. and clamp pieces, • Weld components using manual or semi-automatic welding equipment in various positions (vertical, horizontal or overhead), • Repair machinery and other components by welding pieces and filling gaps, • Test and inspect welded surfaces and structure to discover flaws, • Maintain equipment in a condition that does not compromise safetyRequirements:, • Proven experience as welder, • Experience using a variety of welding equipment and procedures (TIG, MMA etc.), • Experience in using electrical or manual tools (saws, squares, calipers etc.), • Ability to read and interpret technical documents and drawings, • Knowledge of relative safety standards and willingness to use protective clothing (face-shield, gloves etc.), • Deftness and attention to detailPreferred Skills / Qualifications:, • General mechanical background., • Ability to use hand tools and welding tools safely., • Minimum of 1 year experience in mechanical assembly, AWS certification (American Welding Society) for welding of carbon steel using GMAW process position 3G, Vertical up and 4F overhead., • Able to work with limited supervision and follow instructions., • Able to work as a team member in group situations., • Fully understand manufacturing drawings, able to verify dimensions., • Understand tolerance systems., • Complete shop order documentation and time sheets., • Meet internal Company standards for quality and workmanship, • Expected to contribute and maintain conditions that will ensure a healthy and safe working environment., • Working knowledge of torch and plasma equipment., • Working knowledge of GTAW Welding, • Ability to apply workmanship standards and understand and carry out instructions furnished in written, oral or diagram form.

Job Description Welder / Fabricator – 2nd Shift (3:30 PM–Midnight) Location: Buffalo, NY Schedule: 2nd Shift | 3:30 PM – 12:00 AM | Monday–Friday Employment Type: Full-Time | Overtime Available Industry: Industrial Manufacturing • Structural Steel • Modular Fabrication Job Overview We are seeking an experienced Mechanical Welder / Fabricator for our 2nd Shift (3:30 PM–Midnight) industrial manufacturing operations. The Mechanical Welder / Fabricator will fit, tack, weld, assemble, and repair steel components, structural assemblies, and production parts using MIG/GMAW, TIG/GTAW, and other welding processes in a fast-paced fabrication environment. This role is ideal for candidates with experience in manufacturing welding, structural steel welding, blueprint reading, mechanical assembly, production welding, and industrial metal fabrication. Daily Responsibilities As a 2nd Shift Mechanical Welder / Fabricator, you will: Welding & Fabrication • Fit, tack, and weld carbon steel, stainless steel, and low-alloy steel using MIG/GMAW, TIG/GTAW, and manual welding techniques., • Weld assemblies, sub-assemblies, brackets, channels, angles, and modular components per engineering drawings., • Read and interpret blueprints, weld symbols, detail drawings, and fabrication schematics., • Measure, cut, and layout materials using calipers, squares, tape measures, and fabrication tools., • Fabricate fixtures and support tools based on engineering sketches., • Assemble welded components into larger structures, platforms, frames, or modular units., • Inspect welds for accuracy, penetration, and quality., • Repair, rework, or correct fabrication issues and dimensional deviations., • Meet production targets, quality standards, and labor-hour requirements during 2nd shift operations., • Maintain welding machinery, tools, and PPE in safe working condition., • Follow OSHA rules, AWS standards, and internal safety guidelines., • Complete shop order documentation, time sheets, and necessary reports. Requirements: • Proven experience as a Welder, Fabricator, MIG Welder, TIG Welder, or Industrial Welder., • Skilled in MIG, TIG, Stick, GMAW, GTAW, and related welding processes., • Experience using electrical and manual tools (angle grinders, saws, calipers, clamps, squares, measuring tools)., • Ability to read and interpret technical drawings, diagrams, and welding blueprints., • Knowledge of welding safety standards, weld quality requirements, and inspection practices., • Ability to lift 50 lbs and perform physical tasks including bending, kneeling, overhead work, and climbing., • Strong attention to detail and quality craftsmanship., • Willingness to work 2nd shift (3:30 PM–Midnight) and overtime as needed. Preferred Skills / Qualifications • Welders should have AWS Certification (GMAW, 3G Vertical Up, 4F Overhead)., • Mechanical assembly experience in manufacturing or fabrication environments., • Experience welding carbon steel, stainless steel, and alloy steels., • Knowledge of torch cutting, plasma cutting, and GTAW/TIG welding., • Understanding of manufacturing tolerances and measurement verification., • Ability to work independently and as part of a team on 2nd shift.Company DescriptionGTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more.GTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more.

Job DescriptionWelder / Fabricator – $25-29/hr (1st Shift) Join a leading manufacturer of engineered process equipment used in heat transfer and liquid filtration systems. From automatic strainers and heat exchangers to aftercoolers and cyclone separators, you’ll be part of a team that builds high‑performance industrial systems with precision and pride. Why You’ll Love Working Here This company invests in its people and rewards high‑quality work. You’ll enjoy: • 💰 401(k) with company match, • 🏥 80% employer‑paid health insurance, • 👀 Full medical, dental & vision benefits, • 👓 Annual eyewear/equipment allowance, • 👢 $150 boot allowance each year, • 🔧 Interesting, varied projects—no two builds are the same, • Performing high‑quality welds, repairs, and assemblies using multiple welding techniques, • Operating fabrication equipment (brakes, rolls, shears, drill presses, flame cutters), • Measuring and verifying workpiece specifications with precision tools, • Reading and interpreting blueprints, schematics, and build drawings, • Setting up and running machine tools (drill press, end mill, edge planer), • Assembling and installing equipment using both hand and power tools, • Aligning and fastening machine components accurately during assembly, • Operating lathes and additional fabrication equipment as needed, • Cutting, threading, bending, and connecting metal and non‑metal piping, • Securing piping with brackets, clamps, and hangers, • Performing both TIG and MIG welding on stainless steel and carbon steelWhat You Bring, • 4+ years of welding and fabrication experience, • Strong proficiency in TIG and MIG welding on stainless & carbon steel, • Ability to read and interpret blueprints and technical drawings, • Experience running fabrication machinery and shop tools, • High school diploma or GED required, • Strong attention to detail, craftsmanship, and safety awarenessBonus Skills, • Fabrication‑heavy experience, • Pulse welding experience, • Moderate noise, heat, and active fabrication equipment, • Standing, lifting, bending, and hands‑on work for the full shift, • A safety‑focused culture with required PPE Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Tonawanda,NY. Application Deadline This position is anticipated to close on Mar 31, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

About the Company This firm is an established engineering and manufacturing company specializing in manufacturing products across industrial, structural, aerospace, defense, and infrastructure applications. The company designs, engineers, manufactures, and tests its products in-house, delivering fully integrated solutions for complex, dynamic, and motion-control challenges. Core Responsibilities • Develop and refine manufacturing workflows for precision-machined parts., • Produce CNC programs for lathes, vertical mills, and complex multi-axis / multi-spindle equipment. Familiarity with Mazatrol controls is beneficial., • Organize job packages, including machining programs, tooling selections, and complete setup documentation., • Provide technical guidance and hands-on support to production teams regarding machining methods and best practices., • Collaborate with operators and engineers to design and implement production fixtures for machining, inspection, and assembly needs., • Generate accurate technical drawings and engineer custom tooling or workholding solutions when necessary., • Incorporate lean manufacturing concepts into both existing and new operations to improve efficiency and eliminate waste., • Take part in continuous improvement initiatives and ensure assigned action items are completed., • Partner with cross-functional teams to diagnose production issues and implement corrective process improvements., • Serve as the connection point between engineering design and manufacturing operations to ensure build feasibility., • Plan and drive initiatives that improve throughput, utilization, and overall productivity metrics., • Promote and support company policies related to workplace safety, environmental responsibility, and compliance. Equal Opportunity Employer We are an equal opportunity employer and consider all qualified applicants without regard to race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic

Title: Controls Engineer Location: Tonawanda, NY (Onsite) Duration: 12+ Months Contract Overview Key Responsibilities Production & Floor Support Provide daily hands‑on technical support for engine assembly lines. Troubleshoot issues with PLCs, robotics, HMIs, vision systems, instrumentation, and automation equipment. Respond quickly to equipment downtime and root-cause issues impacting production. Work closely with production, quality, maintenance, and engineering groups to prioritize issues. Machine Controls & Automation Program, modify, and troubleshoot: Siemens PLC systems Rockwell / Allen-Bradley Global Common platforms HMI systems Fanuc robots and cobots Support automation equipment from Hirata (Japan) and other vendors. Vision Systems & Sensors Configure and troubleshoot: Cognex AI vision systems Dalsa Matrox camera systems Equipment Launch & Implementation Support installation and commissioning of new Gen6 Small Block Internal Gas Engine assembly equipment. Assist with procurement, integration, testing, and validation of automated systems. Document changes, support PFMEAs, and maintain standard work. AMR / Material Handling Systems Support Autonomous Mobile Robots (AMR) such as: OTTO Bastian Auto Fork Truck Meetings & Communication Participate in: Morning carryover meeting Smaller team stand-ups End-of-shift review meetings Review cross‑shift communication logs and email updates. Communicate top priorities, risks, and production support needs daily. Required Qualifications Education Associate Degree required Bachelor’s Degree preferred (Electrical Engineering strongly preferred) Experience 5–7 years’ experience in manufacturing, automation, or controls. Will consider less experienced candidates with strong aptitude and learning ability. Must-Have Hard Skills Extensive manufacturing plant floor experience On feet all day, fast-paced environment, high urgency, hands-on troubleshooting Machine controls experience PLCs, robotics, test systems, HMIs, instrumentation, and vision systems Robotics / Automation system experience Fanuc robots/cobots, cameras, AMRs, etc. Preferred Technical Skills (Not required but highly beneficial) Siemens PLC Rockwell/Allen‑Bradley Cognex AI Vision Dalsa / Matrox cameras Fanuc Robot/Cobot programming OTTO AMR, Bastian autonomous forklift Experience in engine assembly or automated assembly lines Soft Skills & Traits Team player with strong communication skills High energy, flexible, positive attitude Quick learner with strong mechanical/electrical aptitude Able to think on their feet in a dynamic environment Comfortable with large manufacturing operations Work Environment Fast-paced engine assembly plant Mix of older equipment (10+ years) and brand‑new automation Highly collaborative with a 12-person engineering team Support production, quality, maintenance, and cross-functional groups

Ingersoll Rand is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Job Title: Centrifugal Assembler/Welder Location: Buffalo, NY Schedule: Monday - Friday 7:00AM - 3:30 PM Pay Range: Starting Pay will range between $27.00 - $32.00 per hour depending on qualifications and experience. This is a full-time, hourly position. About Us: Imagine a company with technology leadership of over 160 years, yet it operates with the energy of a startup. Ingersoll Rand has dedicated itself to Making Life Better for its employees, customers, shareholders, and planets. We produce innovative and mission-critical flow creation and life science technologies - from compressors to precision handling of liquids, gasses, and powers - to increase industrial productivity, efficiency, and sustainability. Supported by over 80+ brands, our products are used in various end-markets including life sciences, food and beverage, clean energy, industrial manufacturing, infrastructure, and more. Across the globe, we're driving growth with an entrepreneurial spirit and ownership mindset. Learn more at irco.com and join us to own your future. Job Overview: We are looking for a skilled Assembler with MIG and TIG welding experience to perform a variety of tasks in conjunction with the assembly of our products. This role is responsible for assembling components, performing MIG and TIG welding as required, and ensuring all parts fit correctly and meet quality specifications for the final product. The ideal candidate will safely perform high-level, continuous production work while maintaining strict adherence to quality and safety standards. Assignments may vary based on business demands. Responsibilities: • Perform assembly and testing of industrial machinery and compression equipment following standard work procedures., • Read and interpret blueprints, method sheets, diagrams, and specifications to assemble components accurately., • Operate pneumatic, power, and hand tools to complete assembly, welding, wiring, painting, and related tasks., • Inspect parts and finished products to detect quality defects and ensure compliance with safety standards., • Load and unload equipment using fork trucks and hoists; support material handling and inventory activities., • Maintain tools and equipment, initiate repair work orders as needed, and ensure proper upkeep., • Maintain a safe, clean work environment in compliance with all safety rules and procedures., • Collaborate with team members, support cross-functional tasks, and contribute to process improvement initiatives. Requirements: • High School Diploma or General Equivalent Diploma (GED) is required., • Familiar with and ability to utilize all hand tools including wrenches, sockets, hammers, tape measures, crimpers, cutters, and steel banding., • MIG & TIG welding., • 3+ years experience welding to exact ASME specifications., • Must know proper purging techniques for stainless steels., • Must be able to lift up to 25 pounds from floor to waist. Occasionally required to lift up to 50 pounds. Core Competences: • Knowledge of and willingness to comply with all general work rules, policies and procedures, including safety guidelines and procedures., • Able to rely on experience and judgment to plan and accomplish goals., • Ability to learn to operate all equipment associated with the job; including, but not limited to, power hand tools, forklifts, skyjacks, cranes, and measuring devices., • Ability to identify routine problem causation, and correct routine problems, and willingness to learn., • Broad working knowledge and experience with standard work instructions., • Team oriented, must have the ability to work cohesively with others., • Must possess ability to work well in a manufacturing environment., • Must be detail-oriented and self-motivated., • Must be able to work in a multi-tasked environment. Preferences: • 3+ years in manufacturing experience preferred., • Prior experience in mechanical assembly, electrical wiring, precision measurement, blueprint reading and pipefitting is preferred., • Ability to complete X-ray quality work to ASME B31.3, • Knowledgeable of and able to utilize computer systems., • Frequently required to sit, stand, and walk for extended periods., • Reaching and handling with high levels of dexterity., • Occasionally required to work near moving mechanical equipment., • Frequent exposure to various chemicals, sealants, and lubricants., • Occasionally required to work outside where weather conditions range from moderate cold to moderate heat., • Normal exposure to moderate noise levels. Occasional exposure to high noise, levels where hearing protection will be required. Pay Range: Starting Pay will range between $27.00 - $32.00 per hour depending on qualifications and experience. This is a full-time, hourly position. What We Offer At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40+ respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity and efficiency. For more information, visit . APPLY NOW

Manufacturing Engineer: Purpose of the Position This position is responsible for managing documents, equipment, tooling, and fixturing required to manufacture the diverse portfolio of products made by Kistler Instrument Corp. (KIC) Production Facility. The manufacturing engineer develops and troubleshoots manufacturing processes in order to improve product quality, cost, and/or lead-time. This includes investigation and proposal of new production equipment, process procedures, and methods to automate, improve, and/or scale-up new and existing processes. Main Tasks • Provides technical support and improve manufacturing lines by specifying and/or refining BOMs, routings, work instructions, and test procedures., • Design, document, procure, qualify, implement, and improve fixtures, tools and equipment., • Provides documentation and training on assembly methods, test procedures, and production equipment., • Troubleshoot day-to-day process performance issues, develop solutions, and monitor improvements., • Works closely with R&D engineering, quality, purchasing, and planning to ensure products meet specified requirements., • Analyze and plan work force utilization, space requirements, and workflow. Design layouts of equipment and workspaces in conjunction with Kistler’s Lean Initiatives for maximum production efficiency., • Collaborates with R&D engineering design staff to develop manufacturing methods for new products., • Responsible for change management and implementation for changes to manufacturing processes., • Identify and lead continuous improvement efforts using Lean and Six Sigma tools to optimize production operations., • Performs other duties as assigned., • Bachelor’s degree (B.S.) from a four-year technical or engineering college or university and a minimum 2-5 years’ related experience or equivalent of education and experience., • Strong communication, interpersonal, and teamwork skills., • Able to manage multiple projects and prioritize work appropriately to meet commitments., • Demonstrated proficiency in Microsoft Word, PowerPoint, Outlook, and Excel., • Experience with ERP/MRP systems (SAP preferred) relevant to manufacturing operations., • Experience with engineering change systems., • Ability to interpret and create (SolidWorks preferred) complex technical drawings, schematics, and specifications., • Experience with LabVIEW or Test Stand a plus., • Physical requirements: Ability to sit, stand and move about to accomplish tasks, Ability to work on Computers.

Our client, is seeking a dedicated Office Coordinator to join their team. As an Engineering Operations Coordinator, you will be part of the Launching a New Product department supporting the team responsible for the successful launch of the Gen6 engine and the setup of new assembly lines. Job Title: Engineering Operations Coordinator Location: Buffalo, NY Pay Range:$23 Not really focused on years of experience, willing to look at someone right out of college. What's the Job? • Coordinate required training for both hourly and salaried staff involved in the product launch, • Work closely with training leads and understand training requirements and invoicing processes, • Track training completion and ensure compliance with OEM requirements, • Manage office routines and support project management activities, • Bachelor’s Degree in a technical or engineering field, • Strong computer skills, especially in Excel, Word, and PowerPoint, • Excellent communication and interpersonal skills, • Ability to work independently, take initiative, and manage multiple projects, • Opportunity to contribute to a high-profile product launch and gain valuable industry experience, • Potential for contract extension and possible direct hire based on performance, • Engagement in a dynamic, team-oriented environment, • Work on-site in a collaborative setting with flexible shift options, • Be part of a company committed to innovation and continuous improvement If this is a role that interests you and you'd like to learn more, click apply now and a recruiter will be in touch with you to discuss this great opportunity. We look forward to speaking with you! About ManpowerGroup, Parent Company of: Manpower, Experis, Talent Solutions, and Jefferson Wells. ManpowerGroup® (NYSE: MAN), the leading global workforce solutions company, helps organizations transform in a fast-changing world of work by sourcing, assessing, developing, and managing the talent that enables them to win. We develop innovative solutions for hundreds of thousands of organizations every year, providing them with skilled talent while finding meaningful, sustainable employment for millions of people across a wide range of industries and skills. Our expert family of brands – Manpower, Experis, Talent Solutions, and Jefferson Wells – creates substantial value for candidates and clients across more than 75 countries and territories and has done so for over 70 years. We are recognized consistently for our diversity - as a best place to work for Women, Inclusion, Equality, and Disability, and in 2023 ManpowerGroup was named one of the World's Most Ethical Companies for the 14th year - all confirming our position as the brand of choice for in-demand talent.

Join Kistler – A Global Leader in Measurement Technology! At Kistler, we’re revolutionizing industries with our cutting-edge dynamic measurement technology, helping customers optimize products and processes. From automobile development to smart factories, our Swiss-designed sensor solutions are driving the future of electrified drive technology, industrial automation, and emission reduction. Purpose of the Position We are seeking a Vice President of Operations and Engineering to lead our North American production, engineering, and logistics footprint. This leader will drive our localization strategy, focusing on the localization of manufacturing and engineering to serve our key regional focus markets, which include MedTech, Aerospace and Defense, Infrastructure, and Automotive Production. The role will build operational excellence across our footprint, deliver strong connection to customers, and ensure scalable capacity as the market grows. Main Tasks • Lead the implementation of the localization strategy, focusing production and engineering for North American focus markets., • Oversee Operations, including logistics, planning, purchasing, assembly and the machine shop., • Provide strategic and operational leadership for Engineering, including Custom Product Engineering, Application Engineering, and R&D interfaces., • Ensure organizational structure, processes, and capabilities are in place to support full lifecycle engineering from requirements gathering and feasibility analysis to design, validation, release, and production ramp-up., • Take ownership for the Custom Product Engineering organization, including technical content responsibility, decision authority on engineering concepts, and overall delivery quality., • Lead Quality Management and Assurance as part of Operations, including compliance systems, audits, and continuous improvement., • Ensure adherence to AS9100D, ISO 9001, and ISO 17025., • Manage production and engineering KPIs, such as productive hours, delivery reliability, throughput, scrap rate, and on-time launch of development and improvement projects., • Establish performance dashboards and drive data-based decisions using Celonis, Power BI, and other analytics tools., • Provide strong, presence-based leadership at the Amherst site, fostering a culture of accountability, teamwork, safety, and continuous improvement., • Collaborate closely with Sales Directors and the General Manager to maintain proximity to customers and align operations with commercial priorities., • Represent Operations and Engineering during customer meetings, audits, and site visits., • Develop and manage capital investment plans for production assets, engineering equipment, and process capabilities., • Maintain functional alignment with corporate platform leaders in Engineering and Production., • Ensure seamless cross-functional collaboration between Engineering, Production, Sales, Quality, and Product Management to enable customer-centric, technically sound solutions., • Lead and develop teams in accordance with Kistler leadership principles, ensuring talent development, succession planning, and retention. Requirements Profile • Experienced Operations and Engineering leader with a successful track record in complex industrial or high-precision environments., • Twelve or more years of progressive leadership experience in manufacturing, operations, or engineering; experience in MedTech, Aerospace and Defense, Infrastructure, or Automotive Production is highly valued., • Proven leadership of engineering organizations, including responsibility for product engineering, design, customization, and technical decision-making., • Hands-on leadership style, comfortable engaging directly with teams on the shop floor, in labs, and across operations., • Strong understanding of ERP and manufacturing execution systems; SAP experience strongly preferred., • Skilled in lean manufacturing, digital operations, capacity planning, and cross-functional coordination., • Demonstrated success in budget management, capital investment planning, and asset utilization., • Excellent communication, stakeholder engagement, and decision-making skills., • Commitment to continuous improvement and operational excellence., • Willingness to travel occasionally to Novi, MI, and other sites. Why Kistler? At Kistler, we value your expertise and offer opportunities for professional growth in a global environment. Our competitive benefits package includes: • Medical, dental, vision, life, and disability coverage, • 401(k) plan with a 4% company match, • Generous personal and vacation time Join a team that’s shaping the future of measurement technology. We look forward to meeting you! Kistler Instrument Corporation is an Equal Opportunity Employer.

About the Role We are seeking a detail-oriented CAD Drafter to support our engineering and manufacturing teams by producing accurate technical drawings for fabrication and assembly. This role focuses on translating engineer-provided designs, sketches, and specifications into clear, production-ready drawings used on the shop floor. This is an ideal role for early-career drafters or technically minded professionals looking to grow in an industrial manufacturing environment. Key Responsibilities Drafting & Documentation • Create and revise 2D and basic 3D CAD drawings for mechanical components, assemblies, and layouts, • Convert redlines, sketches, and engineer markups into accurate CAD drawings, • Maintain drawing accuracy, dimensions, tolerances, and bill of material references, • Work closely with engineers, designers, and manufacturing teams to ensure drawings meet production needs, • Assist with drawing organization, revision control, and file management, • Follow internal drafting standards, title blocks, and naming conventions, • Ensure drawings comply with basic GD&T, ANSI, and company design standards, • 1–3 years of CAD drafting experience or relevant technical education/training, • Proficiency in AutoCAD and/or SolidWorks (2D required, 3D preferred), • Ability to read and interpret basic engineering drawings and specifications, • Strong attention to detail and accuracy, • Experience supporting fabrication, welding, machining, or industrial manufacturing, • Familiarity with:, • Basic GD&T, • Bill of Materials (BOMs), • Revision control and drawing change processes, • Drawings are clear, accurate, and ready for fabrication with minimal rework, • Engineering changes are incorporated quickly and correctly, • Strong collaboration with engineers and shop personnel, • Consistent adherence to drafting standards and deadlines

This firm is recognized for delivering integrated flight control and actuation solutions for military aircraft in domestic and international markets. The Global Sustainment Engineering team supports the long-term performance and dependability of these systems by designing, developing, and validating specialized equipment used in flight control hardware. As a Senior Design Drafter, you will: • Support early-stage design development by working closely with Design Engineers., • Create complete and often complex design packages with limited technical direction, including layouts, schematics, detail drawings, assembly drawings, and parts lists for prototype and production release., • Carry out advanced redesign and repackaging of existing products through proper component selection and sizing., • Perform engineering calculations related to size, performance, tolerance, and assembly., • Select components, materials, and manufacturing processes that meet design requirements., • Design tooling and fixtures when needed., • Review the work of junior drafting staff for accuracy and compliance., • Ensure all design documentation follows company and military standards., • Support Production in resolving manufacturing issues related to design., • Work with Production to establish effective production control configurations, including kit structure, alternate parts, and revision control., • Keep projects and assigned deliverables on schedule. Equal Opportunity Employer We are an equal opportunity employer and consider all qualified applicants without regard to race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic

My client designs and manufactures a machine that tests the wearability of their customers products. These machines rub, scrape, scratch, pressurizes to see how long it takes for the item being tested fails. Fascinating technology... Position Purpose: Responsible for the continuing production of electro-mechanical products and providing technical support for engineering and new product manufacturing. What Are The Principal Responsibilities Of This Position: • Provides production with a technical understanding of the product line and offers support for concerns, issues, training and procedure updates, • Create, develop, maintain and improve standardization of processes, procedures and instructions through the use of the Engineering Change Notification (ECN) process., • Helps evaluate and improve manufacturing methods, utilizing knowledge of product design, materials and parts, fabrication processes, tooling and production equipment capabilities, assembly methods and quality control standards, • Performs engineering calculations, analyses and in depth reports Daily / Periodic Tasks • Investigates and effectively resolve critical production issues, troubleshoot & resolve manufacturing issues, • Compiles and evaluates test data, prepares technical analyses, develops and release manufacturing methods and processes required to meet design objectives on new or improved products/processes, • Composes or modifies existing or new assembly work instructions and manufacturing fixtures and jigs, • Work with vendors to address ongoing production and new product opportunities between company and vendor., • Support procurement of raw materials, purchased parts through product requirement review, • Identify and develop new processes that reduce costs & errors and increase quality., • Identify and develop control mechanisms to improve reliability., • Train manufacturing personnel on new or improved assembly work instructions, • Perform testing to validate/verify performance characteristics and review test data for product/ customer acceptance, • Minimal interaction with customers and engineering contacts during reviews, audits, on-site visits, • Participates with technical support for Root Cause / Corrective Action items to help team address quality, design, and process issues, • Assists sales and production with the review of production travelers for accuracy and efficiency, • Support/ backup Manufacturing assembly & test personnel, • Support generation of detailed Bills of Material (BOM) / Manufacturing Routers Requirements: • Bachelor's in Mechanical Engineering, • 2+ years of practical experience beyond college with some type of electro-mechanical device., • Knowledge of electro-mechanical machinery or instrumentation including assembly drawings, schematics and wiring diagrams, Dimensional stackup & Geometric Dimensioning & Tolerancing (GD&T), • Proficiency with AutoCAD and SolidWorks 3D Modeling Experience, • Proficiency with Microsoft Office Tools - Excel, Word, Visio Project & PowerPoint, • Knowledge of manufacturing best practices, material specifications & statistical analysis, basic mechanical tools, • Direct experience with planning assembly operations and writing shop floor Routings and work instructions, • Prior experience with soldering, welding and other electro-mechanical assembly operations is preferable ONLY looking for candidates currently living and working in the Buffalo, NY area. MUST be a U.S. Citizen or Green Card Holder, due to the fact that this company does business with the U.S. government / DOD.

With more than 100 years of experience, Sika is a worldwide innovation and sustainability leader in the development and production of systems and products for commercial and residential construction, as well as the transportation, marine, automotive, and renewable energy manufacturing industries. Sika is a specialty chemicals company with a globally leading position in the development and production of systems and products for bonding, sealing, damping, reinforcing, and protection in the building sector and industry. Sika has subsidiaries in 103 countries around the world, produces in over 400 factories, and develops innovative technologies for customers worldwide. In doing so, it plays a crucial role in enabling the transformation of the construction and transportation industries toward greater environmental compatibility. Approximately 33,000 employees generated CHF 11.20 billion in sales in 2025. Job Description Watson Bowman Acme, a Sika company, is a manufacturer and supplier of expansion joint solutions for the transportation sector, including bridge and highway fabrication, preservation, and tunnels. This position is responsible for assisting Welding Fitters, Master Fitters, Forepersons, and Manufacturing Supervision staff as directed in the manufacture and assembly of metallic products supplied to the construction industry. More specifically, assist in fitting sub-assemblies as instructed, including but not limited to, tie downs, straightening, grinding, and stud welding on strip seal steel rails, using hand tools, overhead cranes, and welding equipment. Attention to safety and quality is essential to this position. Salary Range: $24 - $27 an hour based on education, experience, and qualifications of the applicant. Qualifications • High school diploma or equivalency required, additional course work with emphasis on welding preferred., • Ability to read and understand shop drawings and other written instructions., • Use of hand tools and basic TIG and GMAW welding., • Comply with all safety regulations, including Safe Work Permits, training requirements, and use of safety equipment., • Must be able to lift and manage material of up to 50 pounds unassisted; walk or stand for long periods of time; bend, stoop, or kneel if required; wear all required PPE., • Possess the legal right to work and remain in the United States without sponsorship. Additional Information • 401k with Generous Company Match, • Bonuses, • Medical, Dental, and Vision Benefits, • Paid Parental Leave, • Life Insurance, • Disability Insurance, • Paid time off, paid holidays, • Floating holidays + Paid Volunteer Time, • Wellness/Fitness Reimbursements, • Education Assistance, • Professional Development Opportunities We offer competitive salaries, aligned with local market benchmarks and the specific scope and responsibilities of each role. Compensation is determined based skills relevant to the position, education and/or training. We are committed to fair and equitable pay practices in accordance with applicable laws and regulations.

Job Description Production Operator-Wheel Assembly Technician Facility: Buffalo, NY General Description The Production Operator – Wheel Assembly Technician is responsible to effectively operate the tire changer, as well as any secondary equipment to which they are assigned, safely and efficiently. They must use any required equipment, tooling, and measuring devices to ensure a quality product is produced. They must demonstrate the ability to take directions from the immediate manager and designated management representatives. Specific Duties • Retains all specific duties of Production Operator Job Description., • Install runflats in properly without damage to the wheel and tire, and without leaving any unnecessary components or tools inside the assembly., • Follow proper start up and shut down procedures when using tire install machines., • Alert immediate manager of any issues with tire install machines and assist with cleaning and maintenance of the equipment when safe and appropriate., • Follow all applicable environmental, health and safety rules and procedures and immediately report all dangerous situations, near-misses, and injuries., • Participate in developing and updating risk assessments and review all applicable risk assessments annually. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Qualifications • Retains all qualifications of Production Operator Job Description., • Previous experience working with a tire changer is preferred., • A reasonable level of mechanical aptitude and attention to detail is needed to properly install the runflats, in the correct sequence, using the designated tools and fixturing, without creating any quality defects. Physical Demands • The physical demands described here are representative of those that must be met by an employee to perform the essential functions of this job successfully., • The employee frequently is required to stand; walk, talk and hear. The employee is occasionally required to climb or balance and stoop. A large degree of lifting (moderate to heavyweight), bending, squatting and maneuvering. Specific vision abilities required by this job include close vision, for viewing a computer terminal distance vision, peripheral vision, depth perception vision for moving objects and ability to adjust focus., • This position is not substantially exposed to adverse environmental conditions., • The ability to work with chemicals in the proper environment and while wearing PPE. Personal Protective Equipment The following list of PPE is required while in the manufacturing area: • Safety Glasses conforming to ANSI Z87.1 or higher, • Steel Toe Safety Shoes conforming to OSHA General Industry Standards 29 CFR 1910, • Hearing protection conforming to OSHA General Industry Standards 29 CFR 1910, • The ability to wear a dust mask conforming to OSHA General Industry Standards 39 CFR 1910.134, • Additional PPE may be required depending on the department Hutchinson Industries, Inc. is an equal opportunity employer. This is a non-exempt position. Hutchinson Industries, Inc. reserves the right to modify the job description based upon its needs and may require the employee to perform functions beyond those mentioned above. Neither this job description nor any other communication creates an employment contract between Hutchinson Industries, Inc. nor the employee, and either one may terminate employment without notice at any time.

Job DescriptionCompany Overview GTI designs, engineers, and manufactures custom modular systems supporting energy storage, data center infrastructure, defense, and industrial markets. Our operations include in-house fabrication, welding, mechanical and electrical assembly, industrial painting, and final build of complex modular products.GTI operates fast-paced manufacturing facilities where safety, quality, and teamwork matter. This role is designed as an entry point into GTI’s manufacturing organization, with opportunities to grow into skilled trades and technical roles.Position Overview GTI is hiring Entry-Level General Laborers to support daily production operations across fabrication, welding, assembly, and paint departments. This is an evergreen position used to maintain a steady pipeline of candidates for current and future manufacturing needs.General Laborers provide hands-on support to skilled trades and production teams by assisting with material handling, basic assembly, surface preparation, shop organization, and maintaining a safe and efficient work environment. No prior manufacturing experience is required. Training is provided.Key ResponsibilitiesProduction & Shop Support • Support fabrication, welding, assembly, and paint teams with daily production tasks, • Assist with material movement, staging, and part handling across departments, • Prepare work areas and maintain shop organizationFabrication, Assembly & Paint Support, • Assist welders, fabricators, assemblers, and painters as directed, • Perform basic assembly, fastening, masking, sanding, cleaning, and surface prep tasks, • Support paint operations with part prep, masking, hanging, and cleanup, • Support mechanical and electrical assembly teams with component staging and installation assistanceTools, Equipment & Housekeeping, • Use basic hand tools and power tools under supervision, • Maintain clean workstations and shared shop areas, • Assist with equipment setup, teardown, and cleanupSafety & Quality, • Follow safety procedures, PPE requirements, and work instructions, • Maintain quality awareness and report defects or issues, • Support safe handling of materials, tools, and equipmentTeam & Production Support, • Follow direction from supervisors and lead workers, • Support production schedules through reliability and flexibility, • Work collaboratively in a fast-paced manufacturing environmentRequired Qualifications, • Willingness to learn and work in an industrial manufacturing environment, • Ability to follow instructions and safety requirements, • Ability to lift up to 50 lbs and perform physical tasks throughout the shift, • Ability to stand, bend, climb, and work on your feet for extended periods, • Reliable attendance and strong work ethicPreferred Qualifications, • Prior experience in manufacturing, fabrication, construction, warehouse, paint, or assembly roles, • Familiarity with hand tools, power tools, or industrial environments, • Interest in growing into skilled trades such as welding, assembly, paint, electrical, or maintenance 1st shift 5:00am-3:30pm/2nd Shift M-Thurs 4pm-2:30 am

Job Description Job Title: Mechanical/Electrical Assembler – Modular Manufacturing Location: Buffalo, NY (On-Site) Department: GTI Energy – Manufacturing Employment Type: Full-Time | Non-Exempt About GTI Fabrication GTI Fabrication is a leader in industrial manufacturing, modular construction, and metal fabrication, specializing in the design and assembly of modular structures, energy storage enclosures, and shipping container-based systems. We support industries including defense, military, energy storage, disaster relief, and commercial construction. Our team includes welders, electricians, assemblers, HVAC technicians, fabricators, and engineering professionals working together to build high-quality, mission-critical modular solutions. This Mechanical/Electrical Assembler role is based at our GTI Energy manufacturing facility in Buffalo, NY. Position Overview As a Mechanical/Electrical Assembler, you will support the assembly, installation, and integration of mechanical, electrical, and HVAC components into energy storage enclosures and modular industrial structures. This role is ideal for individuals with experience in mechanical assembly, electrical assembly, HVAC installation, construction labor, or general industrial assembly. Key Responsibilities 1. Component & System Assembly • The Mechanical/Electrical Assembler will assemble, install, and integrate mechanical, electrical, and structural components into energy storage enclosures and modular units., • Follow assembly drawings, blueprints, schematics, and written work instructions. 2. Mechanical Assembly • Perform hands-on tasks: cutting, drilling, mounting, bolting, fastening, and structural integration., • Install mechanical components, hardware, ducting, frames, and industrial parts. 3. Electrical Assembly & Wiring • A Mechanical/Electrical Assembler will assist with running conduit, pulling wire, cable routing, and installing electrical components., • Use multimeters, meters, and diagnostic tools to test and troubleshoot circuits., • Perform basic electrical installation, maintenance, and repairs (as qualified). 4. HVAC Installation • Install HVAC units, ducting, vents, and climate control systems for modular enclosures. 5. Blueprint Interpretation • Read and follow simple blueprints, diagrams, and assembly drawings to ensure accurate integration. 6. Power Tools & Equipment • Operate drills, saws, grinders, impacts, and other power tools safely., • Experience as a Mechanical/Electrical Assembler, construction laborer, mechanical assembler, electrical assembler, HVAC installer, or industrial assembler., • Proficiency with power tools, tape measures, hand tools, and diagnostic equipment., • Ability to read and interpret basic blueprints and diagrams., • Experience with electrical tasks (conduit, wiring, testing) or HVAC installation (preferred)., • Ability to lift 50 lbs+, stand for long periods, and work in an industrial manufacturing environment., • Modular construction, containerized structures, or energy storage system assembly., • Mechanical, electrical, HVAC, or fabrication background., • Fast-growing industrial manufacturing environment., • Hands-on exposure to modular construction, energy storage systems, and electrical integration.

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Job Title: Design Manufacturing Engineer Reporting To: Management, General Engineering Work Schedule: Onsite - Buffalo, NY Our Space Sector is looking for a hands-on Design Manufacturing Engineer to join the Actuation and Avionics ForgeWorks Team. This role will support the A&A Engineering Lab and the ForgeWorks rapid-response cell. Primary focus is rapid diagnosis, containment, prototyping, and validation of mechanical and electromechanical assembly issues on the production floor and in the lab. The role bridges short-term field fixes with durable engineering solutions, participates in lab testing and fixture/tool design, and supports small build activities. ForgeWorks is an embedded, on-floor rapid-response engineering cell and a subset of the FastWorks group. Its mission is to minimize downtime by quickly diagnosing and containing assembly and tooling issues, deploying temporary field-tested fixes to keep production running, then partnering with product and manufacturing engineering to formalize durable solutions. ForgeWorks owns JIRA intake and ticket updates, uses on-floor engagement (Gemba/walkups) to prioritize work, and provides clear traceability from problem report through validation and handoff. As a Design Manufacturing Engineer, you will: \n • Triage on-floor issues and walk-ups: diagnose root cause with technicians and implement temporary containment to keep production running.\n, • Foster strong communication and teamwork with engineering technicians to ensure smooth knowledge transfer, effective problem-solving, and aligned execution on containment and long-term solutions.\n, • Design, fabricate, and test rapid prototypes, jigs, fixtures, and tooling (including 3D printing and machine-room equipment).\n, • Perform or learn to perform hands-on mechanical tasks such as helicoil installation, bearing swaging, press fits, basic machining, riveting, fastening, and fixture assembly.\n, • Execute lab test setups and data collection with the Lab Manager: cabling, fixturing, hydraulics, power, instrumentation, and basic DAQ use.\n, • Create clear OP sheet notes, own and update JIRA tickets from intake through handoff, and document temporary fixes and formalized solutions.\n, • Formalize validated fixes into repeatable builds or prepare full handoff packages (prints, BOM, cost/benefit, test data) for product/manufacturing engineering.\n, • Maintain lab and on-floor tool cleanliness and organization; assist with inventory and basic provisioning.\n, • Collaborate with supply chain, A&T, and product teams to evaluate manufacturability, cost, and long-term stability of solutions.\n, • Support ad-hoc small box builds or short-run assemblies as required.\n\n To be considered for the Design Manufacturing Engineer role, here's what you'll need to bring with you: \n • Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, or equivalent practical experience.\n, • 3+ years of hands-on experience in manufacturing or engineering lab environments with mechanical assembly and tooling work.\n, • Ability to access U.S. export-controlled information\n, • Demonstrated ability to perform mechanical repairs/modifications: helicoil/tap work, bearing swaging/pressing, basic machining, and fixture assembly.\n, • Proficiency with hand and power tools and safe use of shop equipment (presses, drill presses, vertical mills, crimpers, torque tools).\n, • Comfortable in both shop/floor and lab environments; able to lift and maneuver fixtures and assemblies.\n, • Strong troubleshooting aptitude and ability to rapidly diagnose assembly/process issues with technicians.\n, • Clear written and verbal communication skills for documentation and handoffs.\n, • Ability to work independently and prioritize competing requests in a fast-paced setting.\n\n It'd be great if you also had: \n • Experience with electromechanical assemblies, hydraulics, or actuator testing.\n, • Familiarity with basic test instrumentation (multimeter, oscilloscope) or DAQ fundamentals.\n, • Basic CAD skills for quick fixture/tool drawings (e.g., NX).\n, • Experience with JIRA or similar ticketing systems and OP sheet documentation.\n, • Familiarity with rapid prototyping tools (3D printing) and machining practices.\n, • Knowledge of lathe and mill operation (manual or CNC) is preferred.\n\n Location & Work Schedule \n • Onsite, full-time role with frequent presence on the production floor and in the lab.\n, • Moderate physical activity: lifting fixtures, standing for extended periods, operating shop tools, occasional exposure to hydraulic fluids and electrical test setups.\n, • Occasional off-hours support may be required for critical tests or urgent containment actions.\n\n Why This Role Matters You'll keep production moving by quickly resolving assembly and tooling problems, accelerate validation through hands-on prototyping and testing, and close the loop between temporary containment and long-term engineering solutions. Your practical skills will directly reduce downtime, scrap, and rework while strengthening collaboration between technicians and engineers. How We Care For You: • Financial Rewards: great compensation package, annual profit sharing, matching 401k and the ability to participate in Employee Stock Purchase Plan, Flexible Spending and Health Savings Accounts \n, • Work/Life Balance: Flexible paid time off, holidays and parental leave program, relocation assistance \n, • Health & Welfare: Comprehensive insurance coverage including medical, dental, vision, life, disability, Employee Assistance Plan ("EAP") and other supplemental benefit coverages \n, • Professional Skills Development: Tuition Assistance, mentorship and coaching opportunities, leadership development and other personal growth programs \n\n, • Collaborative and Welcoming Workplace: Inclusive culture rooted in our values, enhanced by Employee Resource Groups, and team-building activities.\n, • Additional site-specific benefits may be offered\n\n #LI-CP2 Salary Range Transparency: Buffalo, NY $90,000.00-$110,000.00 Annually Salary Range Disclaimer The base salary range represents the low and high end of the Moog salary range for this position in the given work location. Actual salaries will vary depending on factors including but not limited to location, experience, and performance. The range(s) listed is just one component of Moog's total compensation package for employees. Other rewards may include annual bonuses, employee stock purchase plan, an open paid time off policy, and many region-specific benefits. This position requires access to U.S. export-controlled information. EOE/AA Minority/Female/Sexual Orientation/Gender Identity/Disability/Veteran Moog is an Equal Opportunity Employer, and as such affirms the right of every person to participate in all aspects of employment without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, contact our Human Resources department via phone at 844-367-5787. No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Absent compliance with these pre-conditions resumes submitted directly to any Moog Inc. employee or affiliate will not qualify for fee payment, and therefore become the property of Moog Inc.

Ingersoll Rand is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Job Title: Centrifugal Assembler/Welder Location: Buffalo, NY Schedule: Monday - Friday 7:00AM - 3:30 PM Pay Range: Starting Pay will range between $27.00 - $32.00 per hour depending on qualifications and experience. This is a full-time, hourly position. About Us: Imagine a company with technology leadership of over 160 years, yet it operates with the energy of a startup. Ingersoll Rand has dedicated itself to Making Life Better for its employees, customers, shareholders, and planets. We produce innovative and mission-critical flow creation and life science technologies - from compressors to precision handling of liquids, gasses, and powers - to increase industrial productivity, efficiency, and sustainability. Supported by over 80+ brands, our products are used in various end-markets including life sciences, food and beverage, clean energy, industrial manufacturing, infrastructure, and more. Across the globe, we're driving growth with an entrepreneurial spirit and ownership mindset. Learn more at irco.com and join us to own your future. Job Overview: We are looking for a skilled Assembler with MIG and TIG welding experience to perform a variety of tasks in conjunction with the assembly of our products. This role is responsible for assembling components, performing MIG and TIG welding as required, and ensuring all parts fit correctly and meet quality specifications for the final product. The ideal candidate will safely perform high-level, continuous production work while maintaining strict adherence to quality and safety standards. Assignments may vary based on business demands. Responsibilities: • Perform assembly and testing of industrial machinery and compression equipment following standard work procedures., • Read and interpret blueprints, method sheets, diagrams, and specifications to assemble components accurately., • Operate pneumatic, power, and hand tools to complete assembly, welding, wiring, painting, and related tasks., • Inspect parts and finished products to detect quality defects and ensure compliance with safety standards., • Load and unload equipment using fork trucks and hoists; support material handling and inventory activities., • Maintain tools and equipment, initiate repair work orders as needed, and ensure proper upkeep., • Maintain a safe, clean work environment in compliance with all safety rules and procedures., • High School Diploma or General Equivalent Diploma (GED) is required., • Familiar with and ability to utilize all hand tools including wrenches, sockets, hammers, tape measures, crimpers, cutters, and steel banding., • MIG & TIG welding., • 3+ years experience welding to exact ASME specifications., • Must know proper purging techniques for stainless steels., • Knowledge of and willingness to comply with all general work rules, policies and procedures, including safety guidelines and procedures., • Able to rely on experience and judgment to plan and accomplish goals., • Ability to learn to operate all equipment associated with the job; including, but not limited to, power hand tools, forklifts, skyjacks, cranes, and measuring devices., • Ability to identify routine problem causation, and correct routine problems, and willingness to learn., • Broad working knowledge and experience with standard work instructions., • Team oriented, must have the ability to work cohesively with others., • Must possess ability to work well in a manufacturing environment., • Must be detail-oriented and self-motivated., • 3+ years in manufacturing experience preferred., • Prior experience in mechanical assembly, electrical wiring, precision measurement, blueprint reading and pipefitting is preferred., • Ability to complete X-ray quality work to ASME B31.3, • Knowledgeable of and able to utilize computer systems., • Frequently required to sit, stand, and walk for extended periods., • Reaching and handling with high levels of dexterity., • Occasionally required to work near moving mechanical equipment., • Frequent exposure to various chemicals, sealants, and lubricants., • Occasionally required to work outside where weather conditions range from moderate cold to moderate heat. What We Offer At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40+ respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity and efficiency. For more information, visit . What We Offer At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand is committed to achieving workforce diversity reflective of our communities. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. APPLY NOW

Ingersoll Rand is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Job Title: Centrifugal Assembler/Welder Location: Buffalo, NY Schedule: Monday - Friday 7:00AM - 3:30 PM Pay Range: Starting Pay will range between $27.00 - $32.00 per hour depending on qualifications and experience. This is a full-time, hourly position. About Us: Imagine a company with technology leadership of over 160 years, yet it operates with the energy of a startup. Ingersoll Rand has dedicated itself to Making Life Better for its employees, customers, shareholders, and planets. We produce innovative and mission-critical flow creation and life science technologies - from compressors to precision handling of liquids, gasses, and powers - to increase industrial productivity, efficiency, and sustainability. Supported by over 80+ brands, our products are used in various end-markets including life sciences, food and beverage, clean energy, industrial manufacturing, infrastructure, and more. Across the globe, we're driving growth with an entrepreneurial spirit and ownership mindset. Learn more at irco.com and join us to own your future. Job Overview: We are looking for a skilled Assembler with MIG and TIG welding experience to perform a variety of tasks in conjunction with the assembly of our products. This role is responsible for assembling components, performing MIG and TIG welding as required, and ensuring all parts fit correctly and meet quality specifications for the final product. The ideal candidate will safely perform high-level, continuous production work while maintaining strict adherence to quality and safety standards. Assignments may vary based on business demands. Responsibilities: • Perform assembly and testing of industrial machinery and compression equipment following standard work procedures., • Read and interpret blueprints, method sheets, diagrams, and specifications to assemble components accurately., • Operate pneumatic, power, and hand tools to complete assembly, welding, wiring, painting, and related tasks., • Inspect parts and finished products to detect quality defects and ensure compliance with safety standards., • Load and unload equipment using fork trucks and hoists; support material handling and inventory activities., • Maintain tools and equipment, initiate repair work orders as needed, and ensure proper upkeep., • Maintain a safe, clean work environment in compliance with all safety rules and procedures., • High School Diploma or General Equivalent Diploma (GED) is required., • Familiar with and ability to utilize all hand tools including wrenches, sockets, hammers, tape measures, crimpers, cutters, and steel banding., • MIG & TIG welding., • 3+ years experience welding to exact ASME specifications., • Must know proper purging techniques for stainless steels., • Knowledge of and willingness to comply with all general work rules, policies and procedures, including safety guidelines and procedures., • Able to rely on experience and judgment to plan and accomplish goals., • Ability to learn to operate all equipment associated with the job; including, but not limited to, power hand tools, forklifts, skyjacks, cranes, and measuring devices., • Ability to identify routine problem causation, and correct routine problems, and willingness to learn., • Broad working knowledge and experience with standard work instructions., • Team oriented, must have the ability to work cohesively with others., • Must possess ability to work well in a manufacturing environment., • Must be detail-oriented and self-motivated., • 3+ years in manufacturing experience preferred., • Prior experience in mechanical assembly, electrical wiring, precision measurement, blueprint reading and pipefitting is preferred., • Ability to complete X-ray quality work to ASME B31.3, • Knowledgeable of and able to utilize computer systems., • Frequently required to sit, stand, and walk for extended periods., • Reaching and handling with high levels of dexterity., • Occasionally required to work near moving mechanical equipment., • Frequent exposure to various chemicals, sealants, and lubricants., • Occasionally required to work outside where weather conditions range from moderate cold to moderate heat. What We Offer At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40+ respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity and efficiency. For more information, visit . What We Offer At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand is committed to achieving workforce diversity reflective of our communities. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. APPLY NOW

Ingersoll Rand is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Job Title: Centrifugal Assembler/Welder Location: Buffalo, NY Schedule: Monday - Friday 7:00AM - 3:30 PM Pay Range: Starting Pay will range between $27.00 - $32.00 per hour depending on qualifications and experience. This is a full-time, hourly position. About Us: Imagine a company with technology leadership of over 160 years, yet it operates with the energy of a startup. Ingersoll Rand has dedicated itself to Making Life Better for its employees, customers, shareholders, and planets. We produce innovative and mission-critical flow creation and life science technologies - from compressors to precision handling of liquids, gasses, and powers - to increase industrial productivity, efficiency, and sustainability. Supported by over 80+ brands, our products are used in various end-markets including life sciences, food and beverage, clean energy, industrial manufacturing, infrastructure, and more. Across the globe, we're driving growth with an entrepreneurial spirit and ownership mindset. Learn more at irco.com and join us to own your future. Job Overview: We are looking for a skilled Assembler with MIG and TIG welding experience to perform a variety of tasks in conjunction with the assembly of our products. This role is responsible for assembling components, performing MIG and TIG welding as required, and ensuring all parts fit correctly and meet quality specifications for the final product. The ideal candidate will safely perform high-level, continuous production work while maintaining strict adherence to quality and safety standards. Assignments may vary based on business demands. Responsibilities: • Perform assembly and testing of industrial machinery and compression equipment following standard work procedures., • Read and interpret blueprints, method sheets, diagrams, and specifications to assemble components accurately., • Operate pneumatic, power, and hand tools to complete assembly, welding, wiring, painting, and related tasks., • Inspect parts and finished products to detect quality defects and ensure compliance with safety standards., • Load and unload equipment using fork trucks and hoists; support material handling and inventory activities., • Maintain tools and equipment, initiate repair work orders as needed, and ensure proper upkeep., • Maintain a safe, clean work environment in compliance with all safety rules and procedures., • High School Diploma or General Equivalent Diploma (GED) is required., • Familiar with and ability to utilize all hand tools including wrenches, sockets, hammers, tape measures, crimpers, cutters, and steel banding., • MIG & TIG welding., • 3+ years experience welding to exact ASME specifications., • Must know proper purging techniques for stainless steels., • Knowledge of and willingness to comply with all general work rules, policies and procedures, including safety guidelines and procedures., • Able to rely on experience and judgment to plan and accomplish goals., • Ability to learn to operate all equipment associated with the job; including, but not limited to, power hand tools, forklifts, skyjacks, cranes, and measuring devices., • Ability to identify routine problem causation, and correct routine problems, and willingness to learn., • Broad working knowledge and experience with standard work instructions., • Team oriented, must have the ability to work cohesively with others., • Must possess ability to work well in a manufacturing environment., • Must be detail-oriented and self-motivated., • 3+ years in manufacturing experience preferred., • Prior experience in mechanical assembly, electrical wiring, precision measurement, blueprint reading and pipefitting is preferred., • Ability to complete X-ray quality work to ASME B31.3, • Knowledgeable of and able to utilize computer systems., • Frequently required to sit, stand, and walk for extended periods., • Reaching and handling with high levels of dexterity., • Occasionally required to work near moving mechanical equipment., • Frequent exposure to various chemicals, sealants, and lubricants., • Occasionally required to work outside where weather conditions range from moderate cold to moderate heat. What We Offer At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40+ respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity and efficiency. For more information, visit . What We Offer At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand is committed to achieving workforce diversity reflective of our communities. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. APPLY NOW

Job Description Job Title Director of Environmental Health & Safety (EHS) Location Buffalo, NY or Phoenix, AZ Department Operations Employment Type Full-Time | Exempt Company Overview GTI designs, engineers, and manufactures complex modular systems supporting energy storage, power generation, modular data center infrastructure, defense, and industrial markets. Operating in a high-mix, engineered-to-order manufacturing environment, GTI delivers steel enclosures, integrated platforms, and mission-critical modular systems. Maintaining safe operations, environmental compliance, and disciplined quality systems is critical to GTI’s manufacturing performance and ISO 9001-certified operating environment. Position Overview GTI is seeking a Director of Environmental Health & Safety (EHS) to lead enterprise safety, environmental compliance, and risk management across manufacturing operations. This role is responsible for developing and enforcing EHS programs that protect employees, ensure regulatory compliance, and support operational excellence in fabrication-driven manufacturing environments. The Director of EHS partners closely with Operations, Engineering, Quality, and Supply Chain leadership to embed safety into daily production activities while maintaining compliance with OSHA regulations, environmental standards, and ISO-aligned quality systems. Key Responsibilities • Develop and lead GTI’s Environmental Health & Safety strategy across manufacturing facilities, • Establish and enforce safety programs aligned with OSHA, EPA, and applicable state and federal regulations, • Build and maintain safety management systems that support ISO 9001 operational discipline, • Lead site-level safety initiatives including hazard identification, risk mitigation, and safety audits, • Oversee incident investigations, root cause analysis, and corrective action implementation, • Develop leading and lagging safety KPIs including TRIR, DART, near-miss reporting, and incident frequency rates, • Implement safety training programs covering equipment operation, lockout/tagout, confined space, welding safety, and industrial hazards, • Partner with manufacturing leadership to integrate safety into fabrication, assembly, welding, and production workflows, • Ensure environmental compliance including waste handling, hazardous material storage, emissions reporting, and regulatory documentation, • Manage site emergency response planning and incident preparedness, • Conduct internal audits and inspections to verify compliance with safety and environmental standards, • Develop and maintain safety documentation, policies, and regulatory reporting requirements, • Lead continuous improvement initiatives to reduce workplace hazards and improve operational safety culture, • Collaborate with HR and Operations to support worker safety training, onboarding safety orientation, and compliance programs, • Provide executive reporting on safety performance, compliance risks, and improvement initiatives Required Qualifications • Bachelor’s degree in Environmental Health & Safety, Occupational Safety, Industrial Engineering, Environmental Science, or related field, • 10+ years of EHS experience within industrial manufacturing or fabrication environments, • 5+ years of leadership experience managing EHS programs or safety teams, • Strong working knowledge of OSHA regulations and environmental compliance standards, • Experience implementing safety systems within ISO-aligned manufacturing environments, • Proven experience leading incident investigations and corrective action programs, • Strong knowledge of industrial hazards including welding, fabrication, heavy equipment, and manufacturing processes, • Demonstrated ability to influence plant leadership and drive safety culture improvements Preferred Qualifications • Certified Safety Professional (CSP), Certified Industrial Hygienist (CIH), or similar certification, • Experience in fabrication, modular manufacturing, or heavy industrial environments, • Experience supporting multi-site manufacturing operations, • Familiarity with environmental reporting, hazardous materials management, and sustainability initiatives, • Experience building enterprise EHS programs in growth-stage manufacturing organizations

Ingersoll Rand is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Job Title: Centrifugal Assembler Location: Buffalo, NY Schedule: Monday - Friday 7:00AM - 3:30 PM Pay Range: Starting Pay will range between $28.00 - $32.00 per hour depending on qualifications and experience. This is a full-time, hourly position. About Us: Imagine a company with technology leadership of over 160 years, yet it operates with the energy of a startup. Ingersoll Rand has dedicated itself to Making Life Better for its employees, customers, shareholders, and planets. We produce innovative and mission-critical flow creation and life science technologies - from compressors to precision handling of liquids, gasses, and powers - to increase industrial productivity, efficiency, and sustainability. Supported by over 80+ brands, our products are used in various end-markets including life sciences, food and beverage, clean energy, industrial manufacturing, infrastructure, and more. Across the globe, we're driving growth with an entrepreneurial spirit and ownership mindset. Learn more at irco.com and join us to own your future. Job Overview: We are looking for a skilled Assembler with MIG and TIG welding experience to perform a variety of tasks in conjunction with the assembly of our products. This role is responsible for assembling components, performing MIG and TIG welding as required, and ensuring all parts fit correctly and meet quality specifications for the final product. The ideal candidate will safely perform high-level, continuous production work while maintaining strict adherence to quality and safety standards. Assignments may vary based on business demands. Responsibilities: • Perform assembly and testing of industrial machinery and compression equipment following standard work procedures., • Read and interpret blueprints, method sheets, diagrams, and specifications to assemble components accurately., • Operate pneumatic, power, and hand tools to complete assembly, welding, wiring, painting, and related tasks., • Inspect parts and finished products to detect quality defects and ensure compliance with safety standards., • Load and unload equipment using fork trucks and hoists; support material handling and inventory activities., • Maintain tools and equipment, initiate repair work orders as needed, and ensure proper upkeep., • Maintain a safe, clean work environment in compliance with all safety rules and procedures., • High School Diploma or General Equivalent Diploma (GED) is required., • Familiar with and ability to utilize all hand tools including wrenches, sockets, hammers, tape measures, crimpers, cutters, and steel banding., • MIG & TIG welding., • 3+ years experience welding to exact ASME specifications., • Must know proper purging techniques for stainless steels., • Knowledge of and willingness to comply with all general work rules, policies and procedures, including safety guidelines and procedures., • Able to rely on experience and judgment to plan and accomplish goals., • Ability to learn to operate all equipment associated with the job; including, but not limited to, power hand tools, forklifts, skyjacks, cranes, and measuring devices., • Ability to identify routine problem causation, and correct routine problems, and willingness to learn., • Broad working knowledge and experience with standard work instructions., • Team oriented, must have the ability to work cohesively with others., • Must possess ability to work well in a manufacturing environment., • Must be detail-oriented and self-motivated., • 3+ years in manufacturing experience preferred., • Prior experience in mechanical assembly, electrical wiring, precision measurement, blueprint reading and pipefitting is preferred., • Ability to complete X-ray quality work to ASME B31.3, • Knowledgeable of and able to utilize computer systems., • Frequently required to sit, stand, and walk for extended periods., • Reaching and handling with high levels of dexterity., • Occasionally required to work near moving mechanical equipment., • Frequent exposure to various chemicals, sealants, and lubricants., • Occasionally required to work outside where weather conditions range from moderate cold to moderate heat. What We Offer At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40+ respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity and efficiency. For more information, visit . What We Offer At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand is committed to achieving workforce diversity reflective of our communities. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. APPLY NOW

Ingersoll Rand is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Job Title: Centrifugal Assembler Location: Buffalo, NY Schedule: Monday - Friday 7:00AM - 3:30 PM Pay Range: Starting Pay will range between $28.00 - $32.00 per hour depending on qualifications and experience. This is a full-time, hourly position. About Us: Imagine a company with technology leadership of over 160 years, yet it operates with the energy of a startup. Ingersoll Rand has dedicated itself to Making Life Better for its employees, customers, shareholders, and planets. We produce innovative and mission-critical flow creation and life science technologies - from compressors to precision handling of liquids, gasses, and powers - to increase industrial productivity, efficiency, and sustainability. Supported by over 80+ brands, our products are used in various end-markets including life sciences, food and beverage, clean energy, industrial manufacturing, infrastructure, and more. Across the globe, we're driving growth with an entrepreneurial spirit and ownership mindset. Learn more at irco.com and join us to own your future. Job Overview: We are looking for a skilled Assembler with MIG and TIG welding experience to perform a variety of tasks in conjunction with the assembly of our products. This role is responsible for assembling components, performing MIG and TIG welding as required, and ensuring all parts fit correctly and meet quality specifications for the final product. The ideal candidate will safely perform high-level, continuous production work while maintaining strict adherence to quality and safety standards. Assignments may vary based on business demands. Responsibilities: • Perform assembly and testing of industrial machinery and compression equipment following standard work procedures., • Read and interpret blueprints, method sheets, diagrams, and specifications to assemble components accurately., • Operate pneumatic, power, and hand tools to complete assembly, welding, wiring, painting, and related tasks., • Inspect parts and finished products to detect quality defects and ensure compliance with safety standards., • Load and unload equipment using fork trucks and hoists; support material handling and inventory activities., • Maintain tools and equipment, initiate repair work orders as needed, and ensure proper upkeep., • Maintain a safe, clean work environment in compliance with all safety rules and procedures., • High School Diploma or General Equivalent Diploma (GED) is required., • Familiar with and ability to utilize all hand tools including wrenches, sockets, hammers, tape measures, crimpers, cutters, and steel banding., • MIG & TIG welding., • 3+ years experience welding to exact ASME specifications., • Must know proper purging techniques for stainless steels., • Knowledge of and willingness to comply with all general work rules, policies and procedures, including safety guidelines and procedures., • Able to rely on experience and judgment to plan and accomplish goals., • Ability to learn to operate all equipment associated with the job; including, but not limited to, power hand tools, forklifts, skyjacks, cranes, and measuring devices., • Ability to identify routine problem causation, and correct routine problems, and willingness to learn., • Broad working knowledge and experience with standard work instructions., • Team oriented, must have the ability to work cohesively with others., • Must possess ability to work well in a manufacturing environment., • Must be detail-oriented and self-motivated., • 3+ years in manufacturing experience preferred., • Prior experience in mechanical assembly, electrical wiring, precision measurement, blueprint reading and pipefitting is preferred., • Ability to complete X-ray quality work to ASME B31.3, • Knowledgeable of and able to utilize computer systems., • Frequently required to sit, stand, and walk for extended periods., • Reaching and handling with high levels of dexterity., • Occasionally required to work near moving mechanical equipment., • Frequent exposure to various chemicals, sealants, and lubricants., • Occasionally required to work outside where weather conditions range from moderate cold to moderate heat. What We Offer At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40+ respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity and efficiency. For more information, visit . What We Offer At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand is committed to achieving workforce diversity reflective of our communities. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. APPLY NOW

Job Description Come join John W. Danforth Company, one of the largest mechanical contractors in the Northeast! We are seeking a hands-on, process-driven Manufacturing Operations Manager to lead our regional shop operations with a strong focus on efficiency, workflow optimization, and operational excellence. In this role, you will oversee fabrication, production planning, logistics, and shop performance while driving continuous improvement initiatives that enhance throughput, quality, safety, and cost control. You will partner closely with Project Managers, Purchasing, and QA/QC to ensure materials and fabricated components are delivered accurately and on schedule to support project success. Are you passionate about improving processes, optimizing workflow, and leading high-performing teams in a fast-paced fabrication environment? If so, we invite you to join our team. What We Offer: • Danforth invests in you and your future with employee engagement, team support, career development, and mentoring, • We are a professional organization offering quality benefits, including:, • Medical, dental, disability, and life insurance, • 401(k) & ESOP with generous profit-sharing/matching contributions, • Competitive PTO, holidays, and additional financial incentives What We Ask of You: • Lead and coordinate all pipe, and sheet metal fabrication activities across regional shops, • Drive continuous improvement initiatives focused on efficiency, workflow optimization, and waste reduction, • Develop and implement master fabrication and production schedules to maximize throughput and on-time delivery, • Evaluate and improve shop processes, tooling, and layout to enhance productivity and accountability. Lead ROI studies for process and equipment purchases., • Ensure all work is performed in the safest manner possible, reinforcing a strong safety culture, • Participate in turnover, pre-construction, and project status meetings to maximize fabrication opportunities, • Collaborate with Project Managers, Purchasing, and QA/QC to align on certifications, communications, Internal SOP’s, contract and code requirements, • Oversee shop deliveries, drivers, and order accuracy to ensure reliable material flow to job sites, • Oversee management of shop inventory levels to ensure materials are available and ready to support project demands, • Oversee team responsible for deliveries, tools, and equipment, • Monitor key performance metrics and implement process improvements to reduce cost, improve quality, and increase efficiency, • Foster strong labor relations and continuously improve workforce productivity and engagement Experience & Competencies: • Bachelor’s degree in industrial, manufacturing, mechanical, or related field preferred but not required; equivalent practical experience will be considered, • Approximately 10 years of experience in mechanical shop fabrication, manufacturing, or industrial production environments, • Demonstrated success driving process improvement, workflow optimization, or Lean initiatives, • Strong understanding of pipe and sheet metal fabrication, procurement, and assembly, • Experience working with labor unions and improving labor relations and efficiencies, • Strong analytical, organizational, and leadership skills, • High level of integrity, professionalism, and continuous improvement mindset Danforth offers a competitive benefits package for eligible employees, including medical, dental, vision, life, disability, paid time off, and a 401(k) with company match. The estimated compensation range for this role is $80,000 - $110, 000, based on individual experience, qualifications, and location. John W. Danforth Company is an equal opportunity employer and is committed to a workplace free from discrimination.

Job Description⚡ Electrician | $24-30/hr | Full Benefits 📍 Buffalo, NY 🛠 Hands‑On Electrical Assembly & Troubleshooting 🌍 Global, Innovation‑Driven Company 🎯 About the Role We are seeking a skilled Electrician to join a high‑tech manufacturing team that builds advanced aseptic processing and freeze‑drying equipment used in pharmaceutical production worldwide. You’ll perform electrical assembly, panel wiring, troubleshooting, conduit work, and system integration on complex industrial machines including freeze dryers, isolators, and fill‑finish systems. 🛠 Key Responsibilities • Perform electrical wiring, layout, and component integration on complex industrial systems, • Assemble control cabinets, power cabinets, sub‑panels, and mechanical layouts, • Interpret electrical schematics to ensure accurate and code‑compliant builds, • Conduct testing of wiring and system functionality before/during power‑up, • Collaborate with engineering to resolve technical issues, • Support cross‑functional manufacturing and equipment build activities, • Maintain all safety, quality, and regulatory standards, • Keep workstations clean and compliant with SHE (Safety, Health & Environmental) requirements✔ Must Haves, • Experience as an industrial or manufacturing electrician, • Ability to read/interpret schematics, wiring diagrams, and assembly drawings, • Strong working knowledge of NEC, UL, CSA, or similar electrical codes, • Hands‑on experience with panel wiring, troubleshooting, and electrical assembly, • Ability to bend, climb, work at heights or confined spaces, and lift 50 lbs, • Strong commitment to safety and compliance, • Willingness to travel domestically/internationally when needed⭐ Additional (Nice to Have), • Strong mechanical aptitude for electro‑mechanical integration, • Skilled with hand tools, power tools, and electrical test instruments, • Familiarity with breakers, relays, sensors, VFDs, and industrial controls, • Basic understanding of PLC‑based systems (troubleshooting level), • Ability to document work accurately and follow build instructions, • Flexibility to support system start‑ups or occasional off‑site assistance, • Professional, reliable work habits in a regulated environment🎁 Perks & Benefits (What Makes This Role Stand Out)📘 Continuous Learning & Growth, • Access to internal training programs, • Technical development opportunities, • Support for external learning initiatives, • Hands‑on exposure to advanced pharmaceutical technologies💙 Wellbeing & Financial Benefits, • Comprehensive medical, dental, vision, life, and disability insurance, • 401(k) retirement plan, • Tuition assistance to support career advancement, • Annual bonus program🌍 Culture & Work Environment, • Multinational organization with a commitment to diversity and inclusion, • Clean, climate‑controlled production environment, • High‑tech manufacturing environment focused on pharmaceutical freeze‑drying and aseptic equipment, • Climate‑controlled production bays designed for precision assembly and testing, • Large‑scale build areas for lyophilizers, aseptic fill‑finish machinery, and isolation systems, • Access to development labs for testing, evaluation, and troubleshooting, • Cleanroom‑supported operations for aseptic manufacturing tasks PERKS AND BENEFITS - Global Environment: A dynamic, innovation‑driven workplace within a multinational and multicultural organization. - Diversity & Inclusion Culture: Supported through the Corporate Code of Ethics and strengthened by dedicated inclusion programs. - Continuous Learning: Access to internal training and external development opportunities that support long‑term career growth. - Wellbeing: Comprehensive medical, dental, vision, life, and disability insurance; 401(k) retirement plan; tuition assistance; and an annual bonus program. Workplace Type This is a fully onsite position in Tonawanda,NY. Application Deadline This position is anticipated to close on Apr 6, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Ingersoll Rand is committed to achieving workforce diversity reflective of our communities. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Title: CNC Machinist Location: Mocksville, NC (Onsite) (338 Valley Rd. Mocksville, NC 27028) Shift: 1st Shift (1st shift - Monday - Friday 7am - 3pm) Pay:$24 - $28 per hour Based on Experience About Us: Imagine a company with technology leadership of over 160 years, yet it operates with the energy of a startup. Ingersoll Rand has dedicated itself to Making Life Better for its employees, customers, shareholders, and planets. We produce innovative and mission-critical flow creation and life science technologies - from compressors to precision handling of liquids, gasses, and powers - to increase industrial productivity, efficiency, and sustainability. Supported by over 80+ brands, our products are used in various end-markets including life sciences, food and beverage, clean energy, industrial manufacturing, infrastructure, and more. Across the globe, we're driving growth with an entrepreneurial spirit and ownership mindset. Learn more at irco.com and join us to own your future. Job Overview: We are looking for a skilled CNC Machinistto perform a variety of tasks as assigned in conjunction with the assembly of our product. You will ensure all parts fit correctly and are suitable for the final product. This position is responsible for safely performing high-level continuous work to quality standards. Assignments may change based on business demands. You must have desired technical knowledge and possess great manual dexterity. Ability to interpret instructions represented in manuals, drawings, schematics etc. and follow them with precision. Responsibilities: • Uses blueprints, sketches, drawings, and/or job instruction sheets to produce dimensions and tolerances of finished work-piece and setup requirements., • Cutting tools, attachments, accessories, and materials on machines such as mills, lathes, grinders, machining centers, drill presses, and drill machines., • Enters commands to retrieve, input, or edit control information for CNC machines., • Sets up, operates, and monitors machine operation to detect malfunctions or out-of-tolerance machining, and adjusts machine controls or control media as required., • Utilizes a variety of measurement tools and methods to evaluate finished parts against specifications., • Reworks parts that don't meet specifications., • Confers with supervisor, engineers, and production personnel to resolve machining problems., • Follows all ISO procedures and safety rules, including wearing personal safety equipment and performing hoist inspections., • Routes completed parts to next machine according to the routing sequence., • Performs data entry on the computer to update part locations., • Updates work order cover sheets, daily production sheets, status sheets, and quality records., • Participates in regular communication among peers and Team Leads to maintain productivity and solve problems as they arise., • Operates with the close attention to detail required to meet print specifications, down to 0.0002in tolerances., • Maintains 5S standards of organization and housekeeping of work area., • Participates in improvement efforts for cell layout, process efficiencies, etc., • High school diploma or GED, • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, blueprints, memos, and procedure manuals., • Ability to effectively share information about job duties in one-on-one and small group situations to supervisor, customers, clients, and other employees of the organization., • Ability to perform basic calculations with numbers between 0.0001 and 0.1, • Ability to convert between metric and US standard units of measure., • Ability to understand and carry out detailed written or oral instructions., • Ability to deal with problems involving several variables, • Ability to use standard problem-solving methods (ie. 5 Whys) as trained, • Ability to stand and walk up to 8 hours continuously during a shift., • Ability to lift up to 35 lbs alone, or 70 lbs with assistance, repeatedly over an 8 hour shift, • Ability to push or pull up to 35 lbs., • Associates degree, or training certification Pay Range: Starting Pay will range between $24.00 - $28.00 per hour depending on qualifications and experience. This is a full-time, hourly position. What we Offer: At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40+ respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity and efficiency. For more information, visit . What We Offer At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand is committed to achieving workforce diversity reflective of our communities. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. APPLY NOW

Ingersoll Rand is committed to achieving workforce diversity reflective of our communities. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Title: CNC Machinist Location: Mocksville, NC (Onsite) (338 Valley Rd. Mocksville, NC 27028) Shift: 3rd Shift (3rd shift - Sunday - Friday 11pm - 7am) Pay:$24 - $28 per hour Based on Experience About Us: Imagine a company with technology leadership of over 160 years, yet it operates with the energy of a startup. Ingersoll Rand has dedicated itself to Making Life Better for its employees, customers, shareholders, and planets. We produce innovative and mission-critical flow creation and life science technologies - from compressors to precision handling of liquids, gasses, and powers - to increase industrial productivity, efficiency, and sustainability. Supported by over 80+ brands, our products are used in various end-markets including life sciences, food and beverage, clean energy, industrial manufacturing, infrastructure, and more. Across the globe, we're driving growth with an entrepreneurial spirit and ownership mindset. Learn more at irco.com and join us to own your future. Job Overview: We are looking for a skilled CNC Machinist to perform a variety of tasks as assigned in conjunction with the assembly of our product. You will ensure all parts fit correctly and are suitable for the final product. This position is responsible for safely performing high-level continuous work to quality standards. Assignments may change based on business demands. You must have desired technical knowledge and possess great manual dexterity. Ability to interpret instructions represented in manuals, drawings, schematics etc. and follow them with precision. Responsibilities: • Uses blueprints, sketches, drawings, and/or job instruction sheets to produce dimensions and tolerances of finished work-piece and setup requirements., • Cutting tools, attachments, accessories, and materials on machines such as mills, lathes, grinders, machining centers, drill presses, and drill machines., • Enters commands to retrieve, input, or edit control information for CNC machines., • Sets up, operates, and monitors machine operation to detect malfunctions or out-of-tolerance machining, and adjusts machine controls or control media as required., • Utilizes a variety of measurement tools and methods to evaluate finished parts against specifications., • Reworks parts that don't meet specifications., • Confers with supervisor, engineers, and production personnel to resolve machining problems., • Follows all ISO procedures and safety rules, including wearing personal safety equipment and performing hoist inspections., • Routes completed parts to next machine according to the routing sequence., • Performs data entry on the computer to update part locations., • Updates work order cover sheets, daily production sheets, status sheets, and quality records., • Participates in regular communication among peers and Team Leads to maintain productivity and solve problems as they arise., • Operates with the close attention to detail required to meet print specifications, down to 0.0002in tolerances., • Maintains 5S standards of organization and housekeeping of work area., • Participates in improvement efforts for cell layout, process efficiencies, etc., • High school diploma or GED, • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, blueprints, memos, and procedure manuals., • Ability to effectively share information about job duties in one-on-one and small group situations to supervisor, customers, clients, and other employees of the organization., • Ability to perform basic calculations with numbers between 0.0001 and 0.1, • Ability to convert between metric and US standard units of measure., • Ability to understand and carry out detailed written or oral instructions., • Ability to deal with problems involving several variables, • Ability to use standard problem-solving methods (ie. 5 Whys) as trained, • Ability to stand and walk up to 8 hours continuously during a shift., • Ability to lift up to 35 lbs alone, or 70 lbs with assistance, repeatedly over an 8 hour shift, • Ability to push or pull up to 35 lbs., • Associates degree, or training certification Pay Range: Starting Pay will range between $24.00 - $28.00 per hour depending on qualifications and experience. This is a full-time, hourly position. What we Offer: At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40+ respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity and efficiency. For more information, visit . What We Offer At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand is committed to achieving workforce diversity reflective of our communities. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. APPLY NOW

Ingersoll Rand is committed to achieving workforce diversity reflective of our communities. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Title: CNC Machinist Location: Mocksville, NC (Onsite) (338 Valley Rd. Mocksville, NC 27028) Shift: 2nd Shift (2nd shift - Monday - Friday 3pm - 11pm) Pay:$24 - $28 per hour Based on Experience About Us: Imagine a company with technology leadership of over 160 years, yet it operates with the energy of a startup. Ingersoll Rand has dedicated itself to Making Life Better for its employees, customers, shareholders, and planets. We produce innovative and mission-critical flow creation and life science technologies - from compressors to precision handling of liquids, gasses, and powers - to increase industrial productivity, efficiency, and sustainability. Supported by over 80+ brands, our products are used in various end-markets including life sciences, food and beverage, clean energy, industrial manufacturing, infrastructure, and more. Across the globe, we're driving growth with an entrepreneurial spirit and ownership mindset. Learn more at irco.com and join us to own your future. Job Overview: We are looking for a skilled CNC Machinistto perform a variety of tasks as assigned in conjunction with the assembly of our product. You will ensure all parts fit correctly and are suitable for the final product. This position is responsible for safely performing high-level continuous work to quality standards. Assignments may change based on business demands. You must have desired technical knowledge and possess great manual dexterity. Ability to interpret instructions represented in manuals, drawings, schematics etc. and follow them with precision. Responsibilities: • Uses blueprints, sketches, drawings, and/or job instruction sheets to produce dimensions and tolerances of finished work-piece and setup requirements., • Cutting tools, attachments, accessories, and materials on machines such as mills, lathes, grinders, machining centers, drill presses, and drill machines., • Enters commands to retrieve, input, or edit control information for CNC machines., • Sets up, operates, and monitors machine operation to detect malfunctions or out-of-tolerance machining, and adjusts machine controls or control media as required., • Utilizes a variety of measurement tools and methods to evaluate finished parts against specifications., • Reworks parts that don't meet specifications., • Confers with supervisor, engineers, and production personnel to resolve machining problems., • Follows all ISO procedures and safety rules, including wearing personal safety equipment and performing hoist inspections., • Routes completed parts to next machine according to the routing sequence., • Performs data entry on the computer to update part locations., • Updates work order cover sheets, daily production sheets, status sheets, and quality records., • Participates in regular communication among peers and Team Leads to maintain productivity and solve problems as they arise., • Operates with the close attention to detail required to meet print specifications, down to 0.0002in tolerances., • Maintains 5S standards of organization and housekeeping of work area., • Participates in improvement efforts for cell layout, process efficiencies, etc., • High school diploma or GED, • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, blueprints, memos, and procedure manuals., • Ability to effectively share information about job duties in one-on-one and small group situations to supervisor, customers, clients, and other employees of the organization., • Ability to perform basic calculations with numbers between 0.0001 and 0.1, • Ability to convert between metric and US standard units of measure., • Ability to understand and carry out detailed written or oral instructions., • Ability to deal with problems involving several variables, • Ability to use standard problem-solving methods (ie. 5 Whys) as trained, • Ability to stand and walk up to 8 hours continuously during a shift., • Ability to lift up to 35 lbs alone, or 70 lbs with assistance, repeatedly over an 8 hour shift, • Ability to push or pull up to 35 lbs., • Associates degree, or training certification Pay Range: Starting Pay will range between $24.00 - $28.00 per hour depending on qualifications and experience. This is a full-time, hourly position. What we Offer: At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40+ respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity and efficiency. For more information, visit . What We Offer At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand is committed to achieving workforce diversity reflective of our communities. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. APPLY NOW

___ Job Type Full-time Description Ready for more than just a job? Build a career with purpose. At Lactalis in the USA, we're committed to providing meaningful opportunities for our people to learn, grow, and thrive-whether you're just starting your journey with us or looking to take the next step in your career. From day one, we offer the tools and support to help you succeed. As the world leader in dairy, Lactalis is a family-owned company with over 85,000 pragmatic and ambitious professionals across the globe. Each day, we're proud to produce award-winning dairy products that bring people together. In the US, we proudly offer an unrivaled house of beloved brands, including Galbani Italian cheeses and ricotta, President specialty cheeses and butters, Kraft natural and grated cheeses, Breakstone's cottage cheese, Cracker Barrel, Black Diamond cheddar, and Parmalat milk. Our yogurt portfolio includes siggi's, Stonyfield Organic, Brown Cow, Oui, Yoplait, Go-Gurt, :ratio, Green Mountain Creamery, and Mountain High, along with a growing family of ethnic favorites like Karoun, Gopi, and Arz. At Lactalis, we live by our core values-Ambition, Engagement, and Simplicity. We foster a workplace where innovation thrives, diverse perspectives are celebrated, and everyone's unique background and ideas are valued. Even if you don't meet every qualification, we encourage you to apply. We want to hear about your PASSION, your STORY, and how your EXPERTISE can help us shape the future of dairy. From your PASSION to ours: Summary: Responsible for a variety of tasks that requires knowledge and/or ability to learn both production equipment and major utility systems. Will work closely with a Class 3 Mechanic or mentor. This is a training/apprentice level. Ability to progress and desire to learn of high importance. From your EXPERTISE to ours: Essential Duties and Responsibilities include the following. Other duties may be assigned. 1. PM's will be done on a daily basis., 2. Troubleshoot and repair production equipment in production operations, utilities, buildings & grounds, etc., 3. Maintains machines with respect to bearings, assembly, disassembly, power transmission, rigging, and lubrication., 4. Effectively completes bench work utilizing common hand tools., 5. Learns to do rudimentary pipefitting of water, steam, and air lines with steel, plastic, and copper pipe materials., 6. Performs routing preventative maintenance on designated equipment. Will assist upper class mechanic on major overhauls. Learns to identify potential issues and reports these to the necessary persons., 7. Attention to detail and accuracy in work required., 8. Clear communication abilities, written and verbal. Qualified applicants will contribute the following: Qualifications: • Strong HVAC required., • Previous food manufacturing experience preferred., • Mechanical experience necessary, electrical abilities necessary., • Stationary engineers/ammonia refrigeration experience preferred., • Must have a valid driver's license. Education and/or Experience: • High School Diploma Required, • Trade School level of Electrical or Mechanical training preferred., • Dairy Experience Preferred, • Basic mathematical skills are required (must be able to calculate averages) At Lactalis, we offer a comprehensive Total Rewards Program with a variety of affordable benefits and coverage options. We support insurance costs significantly, contribute generously to retirement plans, and offer Paid Time Off from day one. We are committed to your professional growth, providing training and development opportunities, including Education Reimbursement. Join us and grow your career. Lactalis is an equal employment opportunity employer. We will not discriminate against applicants with regard to any legally-recognized basis including, but not limited to: veteran status, race, color, religion, sex, national origin, age, marital status, sexual orientation, and physical or mental disabilities. Salary Description $31.192 - $41.05

Job Description Job Title: Manufacturing Recruiter (Skilled Trades) Location: Phoenix, AZ or Buffalo, NY (Remote - candidates must be within commuting distance of our offices) Department: Talent Acquisition Reports To: Recruiting Manager Employment Type: Full-Time Role Overview We are seeking a results-driven Manufacturing Recruiter to support high-volume hourly and skilled trades hiring for our Goodyear, AZ operations. This role owns the full-cycle recruiting process for production, fabrication, welding, assembly, maintenance, and skilled manufacturing roles in a fast-paced environment. This is a hands-on recruiting role requiring strong sourcing instincts, operational discipline, and the ability to manage multiple requisitions while partnering closely with plant leadership. Core Responsibilities High-Volume Recruiting Execution • Own full-cycle recruiting for hourly and skilled manufacturing roles including:, • Production Operators, • Welders / Fabricators, • Electricians, • Maintenance Technicians, • Skilled Trades and Entry-Level Manufacturing roles, • Manage 20–40+ active requisitions simultaneously depending on demand, • Proactively source candidates using:, • Indeed, LinkedIn, ZipRecruiter, local job boards, • Referrals, walk-ins, and community outreach, • Trade schools, workforce development programs, and job fairs, • Build and maintain evergreen pipelines for critical roles, • Act as a trusted partner to plant leaders, supervisors, and operations managers, • Conduct intake meetings to understand staffing needs, schedules, and shift requirements, • Provide regular updates on hiring progress, pipeline health, and challenges, • Screen candidates for skills, reliability, shift fit, and work authorization, • Coordinate interviews, plant tours, and hiring events, • Extend offers, manage pre-employment steps, and support onboarding handoffs, • Maintain accurate candidate records and requisition status in the ATS, • Track key recruiting metrics such as:, • Time-to-fill, • Hiring volume, • Source effectiveness, • Offer acceptance rates, • 2–5+ years of recruiting experience in manufacturing, industrial, or high-volume environments, • Proven ability to hire hourly and skilled trades roles at scale, • Strong sourcing and candidate engagement skills, • Comfortable working on-site in a fast-paced production environment, • Experience recruiting for fabrication, welding, assembly, or industrial manufacturing, • Familiarity with shift-based hiring and production-driven staffing models, • Experience partnering directly with plant or operations leadership, • Bilingual (English/Spanish) a strong plus, • Experience using ATS platforms (Lever, iCIMS, Workday, Greenhouse, etc.)

Job DescriptionResponsibilities * Maintain a safe and clean work area per 6S standards. * Refer unusual or unsafe conditions to supervisor. * Maintain proper documentation and communications to ensure efficient coordination between shifts and departments (e.g. quality, engineering, maintenance) * Orient when requested by supervisor. * Lead when mutually agreed. * Orient and/or lead when requested by supervisor. * Comply with all Quality Management System procedures and work instructions. * Perform other related duties as requested by supervisor. CHIPMAN/CLEANOUT. * Exchange chip and swarf carts. * Operate and maintain chip spinner(s). * Pick up bar ends, scrap, filter bags and oily cardboards. * Responsible for segregation and distribution of various materials into various containers to prevent mixing. * Drain, clean out and refill machines, washers and dip tanks. * Operate and maintain cleanout cart. * Drain oil from drip pans/skids. * Responsible for storage and distribution of cutting oils. GENERAL LABORER. * Assist maintenance department in general labor maintenance type projects. * Inside/Outside cleanup and property maintenance. * Scraping and painting. * Straightening and organizing. BENCH INSPECTOR. * Have a basic knowledge of gauging and instruments. * Be able to understand very direct, simple instructions regarding the use of equipment, gaging and instruments, such as eddy current. * 100% sort parts for both visual and dimensional defects, with high standards of quality and quantity. * Responsible and accountable for parts inspected. * Record and maintain inspection information. * Hand load and hand pack. * Simple hand assembly. * Hand deburr by hand or using equipment such as belt sander, wire wheel, push pull motor or other similar equipment. Company DescriptionAt MacLean-Fogg, you’ll be part of a global manufacturing leader with a 100-year legacy of innovation and excellence. We partner with some of the world’s most iconic brands to create high-quality fasteners, components, and engineered solutions for industries that shape the future. With the recent addition of Mallard Manufacturing, we’ve expanded into industry-leading gravity flow solutions for material handling. Here, your ideas and skills will make an impact—driving cutting-edge solutions, advancing sustainability, and helping build a better tomorrow. Join a collaborative team where your contributions matter and your career can thrive.At MacLean-Fogg, you’ll be part of a global manufacturing leader with a 100-year legacy of innovation and excellence. We partner with some of the world’s most iconic brands to create high-quality fasteners, components, and engineered solutions for industries that shape the future. With the recent addition of Mallard Manufacturing, we’ve expanded into industry-leading gravity flow solutions for material handling. Here, your ideas and skills will make an impact—driving cutting-edge solutions, advancing sustainability, and helping build a better tomorrow. Join a collaborative team where your contributions matter and your career can thrive.

Job DescriptionDescription: Carrier Process Equipment Group (CPEG) offers customers a comprehensive line of large industrial processing equipment for a wide variety of industries. By combining engineering expertise including high tolerance fabrication and assembly, we design and manufacture custom bulk processing equipment solutions. Please visit us at to see the full scale of our product lines and solutions including the diverse family of brands who make up our portfolio. We are seeking a full-time Warehouse Clerk at our Tonawanda, NY location. The Warehouse Clerk is responsible for receiving, shipping, storing and distributing material, equipment and products within the facility, ensuring accuracy and timeliness of all job functions. Responsibilities • Assist shipping and receiving unloading trucks, checking in merchandise, matching purchase orders, • Read work orders, shipping orders or requisitions to determine items to be moved, gathered or distributed and/or shipped., • Move materials and items from receiving or storage areas to shipping or other designated areas., • Sort and place materials or items on racks, shelves or in bins according to predetermined sequence such as size, type, style, color or product code., • File requisitions, work orders or requests for materials, tools or other stock items., • Assemble customer orders from stock and place orders on pallets or shelves, or relocate orders to a holding area or fabrication department., • Mark materials with identifying information using appropriate method., • Open bales, crates and other containers., • Record amounts of materials or items received or distributed via appropriate ERP system., • Assist in counting of physical inventory., • Weigh and count items for distribution within plant to ensure conformance to company standards., • May be assigned facilities maintenance duties as needed, • Prepare parcels for mailing., • Performs related duties as assigned by supervision, • Safety and housekeepingRequirements:, • High School Diploma, or equivalent, • One year prior warehouse clerk experience, • SYTELINE ERP Experience is a plus, • Develop professional and process expertise to provide improved assistance to internal and external customers;, • Knowledge of the workplace safety system;, • Able to work under little supervision;, • Understands and able to utilize mathematical formulas required to perform job., • Able to use a level and tape measures;, • Knowledge of general manufacturing safety rules; proper use and handling of job related safety equipment;, • Able to safely operate forklift and overhead crane;, • Able to understand and carry out detailed written or oral instructions;, • Demonstrates team building, problem solving, communication, time management skills;, • Excellent communication skills both written and verbal; Competitive Benefits • Generous paid time off as well as 80 hours of holiday pay each year., • Ability to become an Employee Owner. This benefit is fully funded by the company—no employee contribution required—and builds value for you over time based on the company's performance. While results vary from year to year, the ESOP consistently delivers retirement benefits that exceed those of a typical 401(k) match., • Medical, Dental, and Vision Insurance. We provide a company contribution with Health Savings Account (HSA) participation. Flexible Spending Accounts (FSAs) are also available for healthcare and dependent care expenses, regardless of whether you are enrolled in a company medical plan., • Company paid Basic Life Insurance, Accidental Death & Dismemberment (AD&D), and Long-Term Disability coverage, along with supplemental Short-Term Disability coverage (company pays 50% of premium)., • Voluntary coverages such as additional life insurance, accident insurance and more., • Employee Assistance Program. Our EAP offers free, confidential support including legal and financial consultations, counseling services, estate planning, travel assistance, and work-life resources such as childcare, eldercare, and health advocacy., • Employee Referral Program bonus., • Educational Assistance., • Career Advancement. CPEG is 100% employee-owned and led by a dynamic executive team of talented individuals who have risen through the management structure., • Option to contribute to a 401(k) plan with flexible loan feature—invest in your future while keeping access to your funds if you need them. *The salary range indicated in this posting represents the minimum and maximum of the salary range for this position. Actual salary will vary depending on factors including, but not limited to, budget available, prior experience, knowledge, skill and education as they relate to the position’s qualifications, in addition to internal equity. The posted salary range reflects just one component of our total rewards package. Other components of the total rewards package may include participation in group health and/or dental insurance, retirement plan, wellness program, paid time away from work, and paid holidays.

Job DescriptionJob Title: Warehouse AssociateLocation: Tonawanda, NYHire Type: Direct HirePay Range: $18.00 - $19.00/hourWork Type: Full-timeWork Model: OnsiteWork Schedule: Monday – Friday, 8:30am – 5pm Recruiter Contact: Blanca Vega, & Scope:Positional OverviewThe Imagine Group is recruiting for a Warehouse Associate on behalf of our client, a leading manufacturer and distributor of engineered fastening solutions. This company serves a wide range of industries including automotive, aerospace, and industrial manufacturing. In this role, you will be responsible for receiving, storing and organizing inventory. In addition, you will assist with picking and packing orders for shipment, performing regular inventory counts and ensuring all products are handled and shipped according to company quality and safety guidelines. As part of our team, you will enjoy a comprehensive benefits package, including: • Medical & Employer Paid: Dental & Vision starting May 1, 2025, • Paid Parental Leave, • 401K and Employer Match, • Paid time off and holidays, • Tuition Reimbursement, • Paid on-the-job Training, • Performance Incentive Bonuses, • Community Volunteering, • Employee Centric CultureRole & Responsibility:Tasks That Will Lead To Your Success, • Receive products and other goods. Use ERP system, JD Edwards, as required for receiving direct finished goods., • Pick orders using our ERP system, JD Edwards, utilizing a Microsoft tablet, • Verify quantity of products received by reading shipping information and box quantities., • Identify and stock products accurately and timely into warehouse bin locations utilizing scanning equipment., • Re-package products as needed by counting items and ensuring the accurate quantity is in each box., • Maintain and process order using tool assembly, bagging machine, rework, and quality sorting., • Prepare and ship product per customer requirements and shipping orders (including bar codes), or secondary process requirements., • Maintain equipment checklists and minimal equipment upkeep. Including scales, forklifts, etc., • Complete required daily and monthly maintenance checklist. Report issues to manager(s)., • Maintain clean warehouse area- following policies and procedures for housekeeping and safety., • Verify returned material authorization (RMA) quantities, part numbers, customer names etc. and close RMA in Syspro., • Become and maintain Penn Engineering approved Forklift certification within 3 months of employment., • Other duties as assignedSkills & ExperienceQualifications That Will Help You Thrive, • High school diploma or equivalent, • 1+ Years of warehouse experience preferred, • Ability to read and communicate both verbally and written in English, • Skill in adding, subtracting, multiplying and dividing numbers, • Ability to use a computer for data entry, data retrieval and updating orders appropriately, • Ability to utilize barcode scanning technology, • Experience with JD Edwards ERP System or another ERP System preferred, • Frequent lifting and carrying of items, often ranging from 10 to 50 pounds (sometimes heavier)., • Frequent lifting as a team for items over 50 pounds, • Standing and walking for extended periods, often 8–12 hours per shift., • Bending, stooping, and crouching to pick up or move items., • Reaching overhead and at various angles to access shelves or storage areas., • Pushing and pulling carts, pallet jacks, or other equipment., • Climbing ladders or stairs to reach high storage areas., • Operating machinery such as forklifts, pallet jacks, or conveyor belts (may require certification)., • Repetitive motions such as scanning, packing, or sorting items., • Working in varying temperatures, including cold storage or hot environments., • Manual dexterity for handling small items, labeling, or packaging.

Job Description Job Title: Quality Assurance Specialist – RMA Department: Quality Reports To: Quality Engineer Job Status: Full-Time FLSA Classification: Non-Exempt Hours: Monday – Friday, 7:30 a.m. – 4 p.m. Salary/Wage Rate: $24.00 - $29.00/hour Tectran Manufacturing Inc. is an industry-leading manufacturer of air, hydraulic, and electrical systems for the transportation industry, serving heavy-duty tractor-trailer and bus markets. We are committed to delivering innovative, durable, and high-performance products that meet demanding customer and regulatory requirements. Job Summary The Quality Assurance & RMA Coordinator manages the full Return Merchandise Authorization (RMA) lifecycle while supporting Quality Assurance initiatives that improve product reliability and customer satisfaction. This role combines hands-on failure analysis, regulatory compliance, data reporting, and cross-functional collaboration to drive continuous improvement and reduce product returns. Responsibilities: RMA Management & Failure Analysis • Manage end-to-end RMA process from intake through disposition, • Review and validate warranty eligibility, • Perform product teardown, testing, inspection, and root cause analysis, • Determine and communicate disposition (repair, replace, credit, reject, return to stock), • Track and analyze RMA metrics, including turnaround time and failure trends, • Inspect and evaluate raw materials, assemblies, and finished goods, • Perform and document testing per internal and customer requirements, • Investigate non-conforming materials (NCMR) and coordinate containment and rework, • Support Corrective and Preventive Actions (CAPA), • Ensure compliance with DOT, FMVSS, ISO 9001, ISO 14001, SAE, and other applicable standards, • Partner with Engineering on root cause investigations and product improvements, • Provide feedback to Manufacturing on defect trends and systemic issues, • Collaborate with Production, Supply Chain, Customer Service, and suppliers to resolve quality concerns, • Participate in continuous improvement initiatives to reduce RMAs and improve processes Education & Experience: • High school diploma or equivalent required, • Experience in product failure analysis and material evaluation, • Experience in a manufacturing or distribution environment preferred, • Electro-mechanical product experience preferred, • Bilingual (English/Spanish) a plus Technical Skills • Proficiency with inspection equipment (CMM, optical comparators, hand measurement tools), • Ability to read and interpret technical drawings/blueprints, • Working knowledge of manufacturing and assembly processes, • Experience with quality tools (5-Why, Fishbone, Pareto, 8D), • Proficiency in Microsoft Office, • Working knowledge of Internal Auditing; experience with planning and executing audits preferred, • Experience with basic in-house calibration of precision hand tools (calipers, micrometers) is preferred but not required Core Competencies: • Strong analytical and problem-solving skills, • Excellent written and verbal communication, • Highly organized and detail-oriented, • Self-motivated, proactive, and results-driven, • Collaborative team player Safety Requirements: • Employee will be required to wear the provided PPE per the role requirements, • Follow site safety and any department specific protocols, • Report safety hazards or potential safety hazards to reporting Supervisor, • Attend company safety meetings Physical Requirements: • Prolonged computer work and desk time, • Frequent standing, walking, and bending throughout facility, • Ability to lift up to 50 lbs, • Frequent use of hand dexterity and near vision Perks: • Health, Dental, Vision, Life and AD&D, and various voluntary insurance coverages, • 401(k) program with a company match, • Wellness program, • Paid time off (PTO) and holiday pay (10 days annually), • $500 referral bonus TECTRAN is an equal opportunity employer. We do not discriminate based on race, color, religion, national origin, sex, age, disability, genetic information, or any other status protected by law or regulation. It is our intention that all qualified applicants are given equal opportunity and that selection decisions be based on job-related factors. Monday - Friday, 7:30 a.m. - 4 p.m.

Job Description Job Title Associate Mechanical Engineer Location Buffalo, NY Department Engineering Employment Type Full-Time | Exempt Company Overview GTI designs, engineers, and manufactures complex modular systems supporting energy storage, power generation, modular data center infrastructure, defense, and industrial markets. Operating in a high-mix, engineered-to-order manufacturing environment, GTI delivers steel enclosures, integrated platforms, and mission-critical modular systems. Our engineering team works closely with manufacturing to develop designs that are structurally sound, manufacturable, and optimized for fabrication and assembly. Position Overview GTI is seeking an Associate Mechanical Engineer to support the design and development of prefabricated steel enclosures and modular systems at our Buffalo manufacturing facility. This entry-level engineering role supports mechanical design, drawing development, and engineering analysis activities under the guidance of senior engineers. The Associate Mechanical Engineer will work closely with manufacturing, quality, and engineering teams to translate design concepts into production-ready mechanical documentation. Key Responsibilities • Develop 2D and 3D mechanical design drawings using SolidWorks and AutoCAD, • Support the design of modular steel enclosures, equipment housings, and structural assemblies, • Perform basic CFD and thermal analysis related to HVAC and airflow within containerized systems, • Assist with FEA analysis of steel weldments and fabricated assemblies, • Interpret engineering markups and revise drawings, schematics, and fabrication documentation, • Collaborate with manufacturing teams to ensure designs support fabrication processes and assembly workflows, • Apply knowledge of sheet metal design, weldments, and modular construction methods in mechanical designs, • Support engineering documentation including bills of materials, revision control, and drawing release packages, • Assist with prototype builds and manufacturing troubleshooting when engineering clarification is required, • Support project timelines by completing assigned engineering deliverables accurately and on schedule, • Maintain compliance with GTI engineering standards and safety policies Required Qualifications • Bachelor’s degree in Mechanical Engineering or related engineering discipline, • 0–3 years of experience in mechanical design, product development, or engineering support roles, • Proficiency using SolidWorks and AutoCAD, • Familiarity with sheet metal design, structural weldments, and metal fabrication concepts, • Strong analytical thinking and problem-solving skills, • Ability to interpret technical drawings and engineering documentation, • Proficiency in Microsoft Office tools including Excel, Word, and Outlook, • Strong communication skills and ability to collaborate within cross-functional engineering teams Preferred Qualifications • Internship or co-op experience in manufacturing or product design environments, • Exposure to design for manufacturing (DFM) principles, • Experience with modular structures, prefabricated systems, or heavy-gauge metal fabrication, • Familiarity with CFD, FEA, or simulation tools used in mechanical design

Job DescriptionQuality Control Technician (2nd Shift – 3:30 - Midnight) Also known as: Quality Inspector, QC Inspector, QA Technician, Quality Assurance Technician, Manufacturing Quality Technician, Welding Inspector, Metal Fabrication Inspector, Structural Steel Inspector, Production Quality Technician Location: Buffalo, NY | Schedule: Monday–Friday, 3:30 PM–12:00 AM | Pay range: 20-25 an hour with Shift differential GTI Fabrication manufactures custom modular structures, energy storage enclosures, and container-based systems for military, defense, energy, and commercial industries. We specialize in metal fabrication, welding, assembly, structural steel, and modular construction at our Buffalo, NY facility. We are hiring a 2nd Shift Quality Control Technician (Quality Inspector / QC Inspector) to perform inspections on welded, fabricated, and assembled components throughout the manufacturing process. Responsibilities * Perform incoming, in-process, and final inspections on fabricated metal parts, welds, and assemblies * Conduct visual weld inspections and dimensional inspections * Read and interpret blueprints, weld symbols, fabrication drawings, and mechanical prints * Maintain accurate QC reports, inspection logs, and test data * Calibrate and maintain measurement tools and QC equipment * Identify nonconformities (NCRs) and communicate issues to supervisors * Support continuous improvement for quality assurance and welding quality * Work closely with fabrication, welding, assembly, and engineering teams Qualifications * 2–5 years of experience as a Quality Control Technician, Quality Inspector, QC Inspector, Welding Inspector, or Manufacturing Quality Technician * Experience with weld inspection and metal fabrication inspection * Proficiency using calipers, gauges, tape measures, squares, and weld inspection tools * Ability to read and interpret mechanical drawings, fabrication prints, and electrical diagrams * Strong math skills (fractions, decimals, tolerances) * Ability to lift 50 lbs and work in a shop-floor production environment * High school diploma or GED Preferred: * AWS CWI certification or working toward certification * Experience in welding, structural steel, modular manufacturing, or industrial fabrication GrowTech Industries, LLC is an equal opportunity employer. 2nd Shift – Monday-Friday 3:30 - Midnight

Job DescriptionAdvanced Manufacturing Engineer Location: Buffalo, NY Department: Engineering / Operations Reports To: Director, New Product Introduction Position Overview We are seeking an Advanced Manufacturing Engineer to design, stabilize, and continuously improve manufacturing processes in a high-mix, fabrication-driven environment. This role plays a critical part in driving operational excellence, built-in quality, and waste elimination. This engineer will work cross-functionally with Operations, Quality, Maintenance, and Supply Chain to ensure processes are capable, repeatable, safe, and scalable—from concept through full production. Key ResponsibilitiesProcess Design & Standardization * Design, develop, and validate robust manufacturing processes aligned with product requirements, safety, and quality expectations. * Establish and maintain standard work, process documentation, and visual controls to ensure repeatable execution. * Lead process development efforts by collaborating with equipment suppliers, integrators, and internal stakeholders. Continuous Improvement (Kaizen) * Identify and eliminate waste using Lean Manufacturing principles (flow, pull, takt, standard work). * Lead and participate in kaizen events, root cause problem solving, and continuous improvement initiatives. * Apply structured problem-solving methods (e.g., PDCA, A3 thinking, 5 Whys) to address process instability and defects. Manufacturing Efficiency & Layout Optimization * Analyze and improve workflow, material flow, space utilization, and equipment layout to support safety, efficiency, and scalability. * Support line balancing, capacity planning, and throughput optimization. Quality at the Source * Design and implement process controls, error-proofing (poka-yoke), and inspection methods to ensure quality is built into the process—not inspected in later. * Partner with Quality to reduce defects, variation, and rework through process capability improvements. Cost & Decision Support * Provide data-driven manufacturing decisions by analyzing labor, material, equipment, and overhead costs. * Support make/buy decisions, capital justification, and process trade-off analysis. Equipment & Process Support * Support equipment commissioning, validation, and troubleshooting. * Coordinate with Maintenance to ensure equipment reliability, uptime, and preventative maintenance alignment. * Serve as a technical resource for manufacturing teams, addressing process questions and improvement opportunities. Data, Documentation & Knowledge Development * Maintain accurate process documentation, databases, and reports related to manufacturing performance. * Develop and deliver training for technicians and operators to ensure process understanding and ownership. * Stay current on manufacturing technologies, methods, and best practices through continued learning. QualificationsRequired * Bachelor’s degree in Manufacturing Engineering, Mechanical Engineering, Industrial Engineering, or related field. * 5+ years of experience as a Manufacturing Engineer in a production environment. * Experience supporting fabrication, assembly, or industrial manufacturing operations. * Strong analytical and problem-solving skills with a structured, methodical approach. * Experience using engineering and manufacturing software tools. * Ability to work independently while effectively leading cross-functional efforts. * Excellent written and verbal communication skills. Preferred * Exposure to Lean Manufacturing, TPS, or continuous improvement systems. * Experience with process mapping, value stream analysis, or standard work development. * Familiarity with quality tools (SPC, PFMEA, control plans). * Experience supporting new product introduction (NPI) or process scale-up. What Success Looks Like in This Role * Manufacturing processes are stable, repeatable, and documented. * Quality issues are prevented upstream through strong process design. * Waste is systematically identified and removed. * Operators and technicians are empowered through clear standards and training. * Decisions are driven by data, not assumptions. * Continuous improvement becomes part of daily work

Job Description Join Kistler – A Global Leader in Measurement Technology! Kistler is the global leader in dynamic measurement technology for measuring pressure, force, torque, and acceleration. Cutting-edge technologies provide the basis for Kistler's modular solutions. Customers in industry and science benefit from Kistler's experience as a development partner, enabling them to optimize their products and processes so as to secure a sustainable competitive edge. The owner-managed Swiss company's unique sensor technology plays a key role in the evolution of automobile development and industrial automation. Kistler is making an important contribution to the further development electrified drive technology, automated and connected driving, emission reduction and smart factories. Our Buffalo location focuses on Piezoelectric, Piezoresistive, & MEMS Sensors, electronics, and instruments. Purpose of the Position This position is responsible for managing documents, equipment, tooling, and fixturing required to manufacture the diverse portfolio of products made by Kistler Instrument Corp. (KIC) Production Facility. The manufacturing engineer develops and troubleshoots manufacturing processes in order to improve product quality, cost, and/or lead-time. This includes investigation and proposal of new production equipment, process procedures, and methods to automate, improve, and/or scale-up new and existing processes. Main Tasks • Provides technical support and improve manufacturing lines by specifying and/or refining BOMs, routings, work instructions, and test procedures., • Design, document, procure, qualify, implement, and improve fixtures, tools and equipment., • Provides documentation and training on assembly methods, test procedures, and production equipment., • Troubleshoots day-to-day process performance issues, develop solutions, and monitor improvements., • Works closely with R&D engineering, quality, purchasing, and planning to ensure products meet specified requirements., • Analyze and plan work force utilization, space requirements, and workflow. Design layouts of equipment and workspaces in conjunction with Kistler’s Lean Initiatives for maximum production efficiency., • Collaborates with R&D engineering design staff to develop manufacturing methods for new products., • Responsible for change management and implementation for changes to manufacturing processes., • Identify and lead continuous improvement efforts using Lean and Six Sigma tools to optimize production operations., • Performs other duties as assigned., • Bachelor’s degree (B.S.) from a four-year technical or engineering college or university and a minimum of 2-5 years’ related experience or equivalent of education and experience., • Strong communication, interpersonal, and teamwork skills., • Able to manage multiple projects and prioritize work appropriately to meet commitments., • Demonstrated proficiency in Microsoft Word, PowerPoint, Outlook, and Excel., • Experience with ERP/MRP systems (SAP preferred) relevant to manufacturing operations., • Experience with engineering change systems., • Ability to interpret and create (Solidworks preferred) complex technical drawings, schematics, and specifications., • Experience with LabVIEW or TestStand a plus. At Kistler, we value your expertise and offer opportunities for professional growth in a global environment. Our competitive benefits package includes: Medical, dental, vision, life, and disability coverage 401(k) plan with a 4% company match Generous personal and vacation time Join a team that’s shaping the future of measurement technology. We look forward to meeting you! Kistler Instrument Corporation is an Equal Opportunity Employer.

Job DescriptionDescription: Carrier Processing Equipment Group (CPEG) offers customers a comprehensive line of large industrial processing equipment for a wide variety of industries. By combining engineering expertise including high tolerance fabrication and assembly, we design and manufacture custom bulk processing equipment and custom fluid solutions. Please visit us at to see the full scale of our product lines and solutions including the diverse family of brands who make up our portfolio. We are looking for a Project Engineer at our Tonawanda, NY location to support the Hebeler-Howard Marten (HHM) division. This full-time, exempt position is responsible for the coordination and completion of assigned engineering projects including analyzing customer requirements for equipment selection. Please visit to see the products and capabilities of HHM. Schedule Monday-Friday, 8 a.m.- 5 p.m., Some remote work is possible. Responsibilities • Aid in project administration from beginning to end., • Complete/support completion of cost estimates for new opportunities and sales efforts., • Analyze customer project requirements and communicate to engineering and production., • Direct and manage project development from beginning to end., • Single point of accountability to oversee, direct and manage deliverables of projects to customer from end to end of project., • Collaborate with vendors/suppliers on pricing, productivity ideas and material substitutions., • Approve vendor/supplier deviations., • Create Design Change Notice(s) (DCN) for customer driven scope changes to internal teams., • Track project scope changes and communicate costs to customers for review/approval., • Work with Syteline ERP System or other manufacturing software to create /load part numbers and material routings, update job information and pricing as requirements change., • Act as liaison between CPEG customers and all departments within CPEG., • Facilitate internal Design Review meeting with Engineering & Designers to review compliance with customer requirements., • Review & Share Product Improvement Trackers (PIT Sheets) to Engineering and Design Teams., • Facilitate and Schedule Project Kickoff meetings with internal teams., • Assesses cost effectiveness of products, projects or services., • Submit cost savings ideas (internal and externally)., • Meet with existing and potential customers., • Supporting the Customer Service team, where applicable., • Writing and follow-up of non-conformity reports & MRRs where applicable., • Represent the customer (point of customer) during design & fabrication of projects., • Support customer and 3rd party witness points / inspections at CPEG facilities.Requirements:, • Associates degree required in Engineering, project management or related field. Bachelor’s degree preferred., • Minimum two (2) to four (4) years’ verifiable experience in the field or in a related area., • Able to travel to Canada to facilitate work on projects manufactured in that location, • Design skills, familiarity with CAD, NX or Inventor, • Awareness of manufacturing methods and procedures., • Maintain a customer-focused perspective in all activities initiated to ensure that customer needs are successfully met., • Have excellent communication skills, both written and verbal., • Able to work cooperatively with other project team members as well as customers;, • Intermediate to advanced proficiency level in Microsoft Word, Excel and Outlook; as well as Adobe Acrobat and Windows., • Able to carry out detailed written or oral instructions., • Able to understand proper handling of all paperwork required in department, including reporting of time, • Able to manage a number of projects at one time with frequent interruptions, • Able to function and concentrate in a busy, noisy environment Competitive Benefits • Generous paid time off as well as 80 hours of holiday pay each year., • Ability to become an Employee Owner. This benefit is fully funded by the company—no employee contribution required—and builds value for you over time based on the company's performance. While results vary from year to year, the ESOP consistently delivers retirement benefits that exceed those of a typical 401(k) match., • Medical, Dental, and Vision Insurance. We provide a company contribution with Health Savings Account (HSA) participation. Flexible Spending Accounts (FSAs) are also available for healthcare and dependent care expenses, regardless of whether you are enrolled in a company medical plan., • Company paid Basic Life Insurance, Accidental Death & Dismemberment (AD&D), and Long-Term Disability coverage, along with supplemental Short-Term Disability coverage (company pays 50% of premium)., • Voluntary coverages such as additional life insurance, accident insurance and more., • Employee Assistance Program. Our EAP offers free, confidential support including legal and financial consultations, counseling services, estate planning, travel assistance, and work-life resources such as childcare, eldercare, and health advocacy., • Employee Referral Program bonus., • Educational Assistance., • Career Advancement. CPEG is 100% employee-owned and led by a dynamic executive team of talented individuals who have risen through the management structure., • Option to contribute to a 401(k) plan with flexible loan feature—invest in your future while keeping access to your funds if you need them. *The salary range indicated in this posting represents the minimum and maximum of the salary range for this position. Actual salary will vary depending on factors including, but not limited to, budget available, prior experience, knowledge, skill and education as they relate to the position’s qualifications, in addition to internal equity. The posted salary range reflects just one component of our total rewards package. Other components of the total rewards package may include participation in group health and/or dental insurance, retirement plan, wellness program, paid time away from work, and paid holidays.

Job DescriptionDescription: Carrier Process Equipment Group (CPEG) offers customers a comprehensive line of large industrial processing equipment for a wide variety of industries. By combining engineering expertise including high tolerance fabrication and assembly, we design and manufacture custom bulk processing equipment solutions. Please visit us at to see the full scale of our product lines and solutions including the diverse family of brands who make up our portfolio. We are looking for a full-time Mechanical Design Engineer at our Tonawanda, NY location. This is an onsite position that is involved with the development and complete engineering definition of products for fabrication in conjunction with sales proposals and customer input that perform in an efficient and reliable manner while satisfying customer needs. Responsibilities • Maintain specific knowledge of project-specific engineering schedule and elevate potential issues with the schedule and/or foreseeable conflicts or delays to supervisor, • Have specific knowledge of project routings and elevate potential issues to supervisor, • Actively participate in project kick-off meetings, • Have a complete understanding of project specifications and customer expectations., • Read and interpret P&ID (Process and Instrumentation Diagrams), • Identify discrepancies or lack of information in available project documentation to supervisor, • Understand and adhere to product design standards and guidelines, • Select and source common mechanical components, • Develop complete definition of mechanical components for communication to vendor for purchasing, • Create comprehensive 3D models to be used for design review and 2D fabrication drawing creation, • Understand and implement machine design practices including geometric dimensioning and tolerancing (GD&T), surface finishes, component fits, • Understand in-house fabrication and testing capabilities. Design products for manufacturability, • Utilize Syteline ERP as required throughout project, • Produce shop-ready drawings and bills of material for fabrication with clear and concise information and details, • Support production during fabrication and assembly phases of projects, • Identify Bill of Materials for product designs and select the proper components that meet the customer specifications, • Collect as-built information as required and track design updates to implement on future projects, • Understand and know how to apply common codes and standards ASME Piping and pressure Vessel code when required and seek support from Design Engineer for total compliance, • Manage multiple projects and balance requirements to keep all jobs on schedule, • Maintaining a dynamic array of tasks and the ability to prioritize through good time management skills, • Work with Project Engineers in a team environment to create conceptual designs to support sales and detailed designs as required Requirements: • Bachelor's degree in Mechanical Engineering or Mechanical Engineering Technology from a 4-year accredited college or university, • Experience with 3D modeling and 2D drafting using Autodesk Inventor (or similar 3D modeling software) design software and parametric modeling techniques, • Experience in complex custom equipment design, • Previous manufacturing floor and design exposure is a plus, • Two (2) years of fulltime verifiable experience in the field Competitive Benefits • Generous paid time off as well as 80 hours of holiday pay each year., • Ability to become an Employee Owner. This benefit is fully funded by the company—no employee contribution required—and builds value for you over time based on the company's performance. While results vary from year to year, the ESOP consistently delivers retirement benefits that exceed those of a typical 401(k) match., • Medical, Dental, and Vision Insurance. We provide a company contribution with Health Savings Account (HSA) participation. Flexible Spending Accounts (FSAs) are also available for healthcare and dependent care expenses, regardless of whether you are enrolled in a company medical plan., • Company paid Basic Life Insurance, Accidental Death & Dismemberment (AD&D), and Long-Term Disability coverage, along with supplemental Short-Term Disability coverage (company pays 50% of premium)., • Voluntary coverages such as additional life insurance, accident insurance and more., • Employee Assistance Program. Our EAP offers free, confidential support including legal and financial consultations, counseling services, estate planning, travel assistance, and work-life resources such as childcare, eldercare, and health advocacy., • Employee Referral Program bonus., • Educational Assistance., • Career Advancement. CPEG is 100% employee-owned and led by a dynamic executive team of talented individuals who have risen through the management structure., • Option to contribute to a 401(k) plan with flexible loan feature—invest in your future while keeping access to your funds if you need them. *The salary range indicated in this posting represents the minimum and maximum of the salary range for this position. Actual salary will vary depending on factors including, but not limited to, budget available, prior experience, knowledge, skill and education as they relate to the position’s qualifications, in addition to internal equity. The posted salary range reflects just one component of our total rewards package. Other components of the total rewards package may include participation in group health and/or dental insurance, retirement plan, wellness program, paid time away from work, and paid holidays.

Job DescriptionSalary: 75000-85000 Project Engineer - Electrical Position Summary: In support of the Companys primary and single most important objective, which isTO GET AND KEEP PROFITABLE CUSTOMERS, this individual is responsible for the design of low voltage power distribution, motor control, PLC control, and network design aspects of SAMCO's custom water, wastewater, and process separation solutions for industry. Successes of the position are measured via the following key indicators: • Timely and accurate completion of electrical designs for projects, • Successful coordination of design efforts with process engineering and programming teams, • Compliance with safety and regulatory standards, including NFPA 70, NFPA 79, and UL 508A, • Development of one-line diagrams and network architecture, • Specification of control hardware, including PLC components, HMIs, VFDs, and network components, • Creation of PLC-based control panel and low voltage motor starter panel wiring schematics, panel layout drawings, and bills of materials, either directly or by supervision of in-house or outsourced design resources, • Raceway/cable sizing and routing, • Coordination with project process engineering and programming teams to provide a complete and functional system, • Support purchasing and manufacturing activities related to panel and assembly construction, • Perform or support factory acceptance testing and troubleshooting, • Support field service team during system commissioning and startup, which may include remote or on-site work, • Development and refinement of SAMCO standards and documentation of best practices related to electrical and control system design, • Bachelors degree in Electrical Engineering or related field, • Minimum of 1 year of experience in electrical engineering, • Proficiency in schematic drafting with AutoCAD (or equivalent), • Strong knowledge of motor power and control circuit design, • Expertise in PLC-based control hardware specification and power/control/signal circuit design, • Experience in industrial networking design and specification (Ethernet, Profinet), • Familiarity with the application of NFPA 70, NFPA 79, and UL 508A to process equipment control systems, • Hands-on experience with wiring, testing, and troubleshooting low voltage power and control wiring for process systems, • Experience with PLC program troubleshooting and development, • Standard office environment, • Field construction environment, • Standard physical requirements for a typical office environment, • Field/in-plant physical activities (e.g., climbing, lifting, standing, and walking continually), • Hearing and visual acuity necessary to be aware of and manage safety hazards and environmental issues in the manufacturing and field settings

Job DescriptionNow Hiring: TIG Welder 📍 Tonawanda, NY ⏰ 1st Shift 💰 $25–$30/hour Build Your Welding Career in a Growing, High‑Tech Fabrication Operation Join a rapidly expanding manufacturer known for custom, high‑precision fabrication and investment in people and technology. This TIG Welder role offers the chance to work on one‑of‑a‑kind projects in a state‑of‑the‑art weld shop, supporting highly regulated industries where quality and precision truly matter. ✅ Competitive pay ($25–$30/hr based on experience) 📈 Upcoming facility expansion with long‑term career stability 🧩 Custom, non‑repetitive projects—no assembly‑line welding 🧪 State‑of‑the‑art weld shop with advanced equipment 🎓 Ongoing technical training and cross‑training opportunities 🏥 Comprehensive benefits (medical, dental, vision) 💼 401(k), tuition assistance, and annual bonus program 🌱 Strong internal growth opportunities within a specialized operation What You’ll Do As a TIG Welder, you’ll handle precision fabrication work in a job‑shop environment, including: • Perform high‑quality TIG welding with purge techniques, • Weld stainless steel, carbon steel, hydraulic lines, and refrigeration components, • Weld Schedule 40 pipe and complete precise fit‑ups, • Produce full‑penetration, sanitary‑grade welds for regulated environments, • Read and interpret P&IDs, blueprints, and general arrangement drawings, • Layout, fit, and assemble piping and mechanical components, • Operate—or train on—computer‑controlled orbital welding equipment, • Use machine‑shop tools and fabrication equipment safely, • Work in physically active environments, including heights and confined spaces, • Lift, move, and position materials up to 50 lbs as requiredWhat You Bring, • TIG welding experience on stainless steel and carbon steel, • Ability to read and interpret blueprints and technical drawings, • Strong mechanical aptitude and attention to detail, • Ability to work independently in a job‑shop setting, • Comfort with physically demanding tasks such as climbing, bending, and lifting, • Commitment to safety, quality, and precision in regulated environmentsNice‑to‑Have Skills (Not Required), • Consistent experience producing sanitary‑grade welds, • Knowledge of welding symbols, tolerances, and material properties, • Experience with hydraulic or pneumatic piping systems, • Strong problem‑solving skills during complex fit‑ups, • Willingness to support light assembly work outside welding when needed, • Interest in learning automated and orbital welding technologiesWork Environment, • Modern, high‑tech industrial manufacturing facility, • Climate‑controlled weld bays designed for precision work, • Focus on aseptic pharmaceutical and freeze‑drying systems, • Cleanroom and regulated manufacturing exposure, • Access to development labs for system testing and evaluation, • 60,000 sq. ft. facility with an additional 80,000 sq. ft. expansion underway This is a Contract to Hire position based out of Tonawanda, NY. Pay and Benefits The pay range for this position is $24.00 - $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Tonawanda,NY. Application Deadline This position is anticipated to close on Apr 6, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Job Title: Global Demand Planner Location: Buffalo, New York (On-Site) Department: Demand Planning Type: Full-Time | Exempt About GTI Fabrication GTI Fabrication designs and manufactures custom modular enclosures, energy systems, and industrial structures for energy, defense, and heavy-industrial markets. As GTI scales production and expands our product portfolio, the alignment between future customer demand and operational capacity has become critical to our long-term success. To support our rapid growth, GTI is hiring a Global Demand Planner to serve as the strategic bridge between Business Development, Operations, Engineering, Production Control, and Finance. This individual will ensure accurate visibility into upcoming customer programs, forecast long-range demand, and validate whether GTI has the labor, equipment, materials, and manufacturing capacity required to support future growth. Position Overview The Global Demand Planner is responsible for building and maintaining GTI’s forward-looking demand forecast based on sales pipeline activity, customer commitments, BD intelligence, and program timelines. This role will analyze future business opportunities to determine labor, material, and manufacturing capacity requirements — ensuring GTI does not overcommit, under-resource, or miss strategic growth opportunities. This role requires strong analytical capability, cross-functional collaboration, and the ability to translate sales opportunities into clear operational forecasts and capacity plans. Key Responsibilities Demand Forecasting & Pipeline Visibility · Partner with Business Development to collect, track, and interpret upcoming opportunities, RFPs, contract awards, and program expansions. · Build long-range demand models (12–36 months) for new and existing customers. · Translate BD pipeline data into forecasted volumes, revenue expectations, and production start dates. · Create and maintain dashboards showing demand by customer, product line, and program lifecycle. Capacity & Resource Planning · Develop capacity models to determine labor, equipment, tooling, and manufacturing hours required to support forecasted demand. · Compare upcoming program needs to GTI’s available fabrication, welding, assembly, electrical, machining, and integration capacity. · Identify constraints (labor shortages, bottleneck work centers, equipment limitations, vendor supply challenges) and propose mitigation strategies. · Partner with Production Control and Operations leadership to validate that schedules, layouts, and staffing align with upcoming workload. Operational Readiness & Scenario Planning · Run “what-if” scenarios to evaluate the impact of new business wins, schedule shifts, or scope changes. · Support GTI’s strategic planning efforts by providing accurate demand signals for hiring plans, tooling investments, and capital expenditure decisions. · Assess whether GTI can support new opportunities without overcommitting or impacting existing programs. Cross-Functional Collaboration · Serve as the forecasting liaison between Business Development, Operations, Engineering, Finance, and Supply Chain. · Provide demand-driven insights to Engineering for NPI planning, long-lead materials, and engineering resource allocation. · Partner with Supply Chain to generate long-term material demand signals and reduce supply risk. · Deliver forecast updates to executive leadership with clear risk indicators and confidence levels. Reporting, Analytics & Governance · Maintain standardized demand planning tools, reports, and methodologies. · Develop KPI dashboards that track forecast accuracy, pipeline conversion rates, and capacity utilization. · Provide monthly and quarterly forecasting updates to executive leadership. · Ensure alignment between CRM/BD pipeline data and Operations planning systems. Required Qualifications · Bachelor’s degree in supply chain, Industrial Engineering, Operations Management, Finance, or related field. · 3–7 years of experience in Demand Planning, S&OP, Capacity Planning, or Program Planning in a manufacturing environment. · Strong analytical skills with proficiency in Excel, Power BI, or similar forecasting tools. · Experience translating pipeline activity into operational requirements. · Understanding of manufacturing processes such as fabrication, welding, assembly, machining, and electrical integration. · Strong communication skills with the ability to present complex data to non-technical stakeholders. Preferred Qualifications · Experience in high-mix, engineered-to-order manufacturing. · Background in S&OP, MRP/ERP systems (NetSuite, SAP, Oracle, etc.). · Familiarity with forecasting models, scenario planning, and resource modeling. · Ability to work with Business Development and Operations simultaneously. · Advanced Power BI or analytics expertise. Success in This Role Looks Like: · GTI has accurate, forward-looking visibility into upcoming business demand. · Leadership clearly understands whether upcoming work exceeds, matches, or underutilizes manufacturing capacity. · No overcommitments to customers due to lack of resourcing. · Operations receives proactive signals for hiring, materials, and equipment needs. · BD, Operations, and Finance are aligned around a unified demand plan.

Job Description Welder / Fabricator – 2nd Shift (3:30 PM–Midnight) Location: Buffalo, NY Schedule: 2nd Shift | 3:30 PM – 12:00 AM | Monday–Friday Employment Type: Full-Time | Overtime Available Industry: Industrial Manufacturing • Structural Steel • Modular Fabrication Job Overview We are seeking an experienced Mechanical Welder / Fabricator for our 2nd Shift (3:30 PM–Midnight) industrial manufacturing operations. The Mechanical Welder / Fabricator will fit, tack, weld, assemble, and repair steel components, structural assemblies, and production parts using MIG/GMAW, TIG/GTAW, and other welding processes in a fast-paced fabrication environment. This role is ideal for candidates with experience in manufacturing welding, structural steel welding, blueprint reading, mechanical assembly, production welding, and industrial metal fabrication. Daily Responsibilities As a 2nd Shift Mechanical Welder / Fabricator, you will: Welding & Fabrication • Fit, tack, and weld carbon steel, stainless steel, and low-alloy steel using MIG/GMAW, TIG/GTAW, and manual welding techniques., • Weld assemblies, sub-assemblies, brackets, channels, angles, and modular components per engineering drawings., • Read and interpret blueprints, weld symbols, detail drawings, and fabrication schematics., • Measure, cut, and layout materials using calipers, squares, tape measures, and fabrication tools., • Fabricate fixtures and support tools based on engineering sketches., • Assemble welded components into larger structures, platforms, frames, or modular units., • Inspect welds for accuracy, penetration, and quality., • Repair, rework, or correct fabrication issues and dimensional deviations., • Meet production targets, quality standards, and labor-hour requirements during 2nd shift operations., • Maintain welding machinery, tools, and PPE in safe working condition., • Follow OSHA rules, AWS standards, and internal safety guidelines., • Complete shop order documentation, time sheets, and necessary reports. Requirements: • Proven experience as a Welder, Fabricator, MIG Welder, TIG Welder, or Industrial Welder., • Skilled in MIG, TIG, Stick, GMAW, GTAW, and related welding processes., • Experience using electrical and manual tools (angle grinders, saws, calipers, clamps, squares, measuring tools)., • Ability to read and interpret technical drawings, diagrams, and welding blueprints., • Knowledge of welding safety standards, weld quality requirements, and inspection practices., • Ability to lift 50 lbs and perform physical tasks including bending, kneeling, overhead work, and climbing., • Strong attention to detail and quality craftsmanship., • Willingness to work 2nd shift (3:30 PM–Midnight) and overtime as needed. Preferred Skills / Qualifications • Welders should have AWS Certification (GMAW, 3G Vertical Up, 4F Overhead)., • Mechanical assembly experience in manufacturing or fabrication environments., • Experience welding carbon steel, stainless steel, and alloy steels., • Knowledge of torch cutting, plasma cutting, and GTAW/TIG welding., • Understanding of manufacturing tolerances and measurement verification., • Ability to work independently and as part of a team on 2nd shift.Company DescriptionGTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more.GTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more.

Job DescriptionJob Title: Mechanical DesignerLocation: Tonawanda, NYHire Type: Direct HirePay Range: $65,000 - $85,000Work Type: Full-timeWork Model: Onsite – hybrid after training, 1 day/weekWork Schedule: Monday – Friday, 8am – 5pm Recruiter Contact: Amy Dugenske, & Scope:Positional OverviewThe Imagine Group is recruiting for a Mechanical Designer on behalf of our client, a leading global provider of custom engineered bulk material processing and handling solutions with operations that include manufacturing and testing facilities serving diverse industries such as chemicals, food, mining, and energy storage in Tonawanda, NY. In this role, you will be responsible for creating detailed 3D models, fabrication drawings, and layouts for custom bulk material processing equipment in support of engineering and manufacturing teams. You will translate engineering concepts into production-ready designs, ensure accuracy of dimensions and tolerances, and collaborate cross-functionally to support efficient fabrication and assembly.Role & Responsibility:Tasks That Will Lead to Your Success • Maintain specific knowledge of project-specific engineering schedule and elevate potential issues with the schedule and/or foreseeable conflicts or delays to supervisor., • Have specific knowledge of project routings and elevate potential issues to supervisor., • Actively participate in project kick-off meetings., • Have a complete understanding of project specifications and customer expectations., • Read and interpret P&ID (Process and Instrumentation Diagrams)., • Identify discrepancies or lack of information in available project documentation to supervisor., • Understand and adhere to product design standards and guidelines., • Select and source common mechanical components., • Develop complete definition of mechanical components for communication to vendors for purchasing., • Create comprehensive 3D models to be used for design review and 2D fabrication drawing creation., • Understand and implement machine design practices including geometric dimensioning and tolerancing (GD&T), surface finishes, component fits., • Understand in-house fabrication and testing capabilities. Design products for manufacturability., • Utilize Syteline ERP as required throughout project., • Produce shop-ready drawings and bills of material for fabrication with clear and concise information and details., • Support production during fabrication and assembly phases of projects., • Identify Bill of Materials for product designs and select the proper components that meet the customer specifications., • Collect as-built information as required and track design updates to implement on future projects., • Understand and know how to apply common codes and standards ASME Piping and pressure Vessel code when required and seek support from Design Engineer for total compliance., • Manage multiple projects and balance requirements to keep all jobs on schedule., • Maintaining a dynamic array of tasks and the ability to prioritize through good time management skills., • Work with Project Engineers in a team environment to create conceptual designs to support sales and detailed designs as required.Skills & ExperienceQualifications That Will Help You Thrive, • Bachelor’s degree in mechanical engineering or mechanical engineering technology from a 4-year accredited college or university., • Experience with 3D modeling and 2D drafting using Autodesk Inventor (or similar 3D modeling software) design software and parametric modeling techniques., • Experience in complex custom equipment design., • Previous manufacturing ?oor and design exposure is a plus., • Two (2) years of full-time verifiable experience in the field.

Job DescriptionCompany Description TOMRA Food is a multinational organization and a leading provider of sensor-based sorting, peeling and integrated post-harvest solution for the food industry. Transforming global food production to maximize food safety and minimize food loss by making sure Every Resource Counts™, has been our strength for over 50 years. At TOMRA, we want people to innovate, show passion in their work and be responsible. We encourage the freedom to innovate and take risks that result in breakthroughs that challenge the status quo. We value passion that focuses and commits to meeting success. We believe in a responsible and safe mindset that takes care of our customers, products, and fellow employees. Job Description The Field Service Engineer is responsible for delivering exceptional technical support, maintenance, installation, and customer training services for TOMRA's cutting-edge food sorting equipment. This role aims to ensure the seamless operation of TOMRA's solutions, maximize equipment performance and enhance customer satisfaction. Primary Job Functions • Perform field service work at customer sites which includes installation, commissioning, testing, integration, optimization, maintenance and repair, ensuring full functionality according to machine specifications., • Perform all mechanical, electrical, electronic and optical tuning and setup., • Analyze, evaluate and diagnose equipment; troubleshooting machine problems through to resolution., • Perform preventative maintenance including preseason service, postseason service and enhancing ongoing performance of machines., • React in a prompt and professional manner to customer machine issues in the field. Where an easy fix is not possible, ensure customer is well informed of the next steps and potential costs., • Address customer complaints and if necessary, escalate to appropriate stakeholders., • Maintain close relationships and work collaboratively with engineering, research & development, sales, customer solution delivery and other internal stakeholders for continuous improvement activities, to advise on any potential sales opportunities and to successfully complete projects. Contribution and collaboration is vital whether its research and development site testing, refurbishment, refitting, upgrades or new installs, all projects require teamwork., • Act as the voice of the customer in the value chain to improve products systems and services, by reporting on feedback and comments received in the field leadership, research and development, or sales., • Assist with training and development of new Field Service Engineers, as requested., • Instruct and train customers on operation of machine, utilization and required maintenance of the systems., • Manage and control tools, test equipment, technical documentation and other assigned equipment., • Embrace related assignments and responsibilities as required to contribute to the overall success of the team., • Promote a “Safety First” culture throughout the company, our customers, and our industry.Qualifications Required: • An Associate's degree in electrical, electronic, automation, mechanical, mechatronics, sustainable manufacturing, or industrial engineering is preferred or combination education and equivalent experience is accepted., • Relevant knowledge of electronics/electrical assembly and wiring., • Strong understanding / knowledge of electronics and electrical assembly and wiring., • Proven to read, analyze and interpret technical procedures and/or governmental regulations., • Assist and support customers in a professional manner, • Ability to establish and maintain effective working relationships with customers, internal and external associates and management, • Excellent communication skills and the ability to deal effectively with customers in the English language as necessary., • Competent with Microsoft Office – Word, Excel and Outlook, • Two plus years’ experience in field service and customer support., • Two plus years’ experience in PC building, repairing and diagnostic testing., • Two plus years’ experience in installing software on PC’s., • Experience with packaging and or printing machinery a plus, • Experience engaging with customers in a service delivery environment, • Experience in electronic system troubleshooting a plus., • Working knowledge of basic analog and digital circuits, electrical power circuits, PLC circuits., • Working knowledge of basic test equipment such as oscilloscopes and voltmeters., • Knowledge of computer hardware and configurations., • Ability to work in Food processing plants, farms, cold storage facilities, and outside in high/low temperatures., • Willing to travel for at least 70% of the time, domestic and internation travel based on a flexible schedule; includes weekends and/or holiday travels., • Ability to drive without restrictions in residency country. Additional Information Pay Band For U.S. applicants, in accordance with applicable disclosure requirements, the anticipated annual base pay range for the Field Service Engineer position is $25.67 to $32.46. The actual salary offer will carefully consider a wide range of factors, including your skills, qualifications, experience and location. Also, certain positions are eligible for additional forms of compensation such as bonuses. Why work for us: Be part of a mission to transform how we all obtain, use and reuse the planet’s resources to enable a world without waste. We love innovation, a collaborative environment where idea sharing and thinking outside the box is encouraged. What we offer: • Comprehensive medical, dental, and vision plans with 100% employee premium coverage, • 31 days of PTO annually (vacation, sick, and holidays), increasing with tenure, • 401(k) with 100% match on the first 4% of your contributions, • 8 weeks of fully paid parental leave for eligible employees, • Up to 4 days of paid bereavement leave to support employees during personal loss, • Employee Assistance Program supporting mental, emotional, and financial well-being, • Inclusive culture that values diversity, well-being, and teamwork TOMRA is proud to be an Equal Opportunity Employer and provides equal employment opportunities to all employees and applicants regardless of race, color, religion, gender, gender identity, age, national origin, disability, parental or pregnancy status, marriage and civil partnership, sexual orientation, veteran status, or any other characteristic protected by law. Reasonable accommodations will be made to meet the requirements of the Americans with Disabilities Act and will be provided as requested by candidates taking part in all aspects of the selection process. All your information will be kept confidential according to EEO guidelines.

Job Description About Company: If you're seeking a company that values inclusivity, development, supportive team dynamics, and stable global growth areas (e.g. hydrogen technology), MHA ZENTGRAF Corp. is a great place to work. We demonstrate values that align with positive employee feedback and a commitment to maintaining a balanced, respectful workplace. About the Role: The Machinist role is critical in manufacturing high-precision components by operating and maintaining various machine tools, including CNC machines and manual lathes. The primary objective is to produce parts that meet exact specifications and quality standards by interpreting blueprints and utilizing precision measuring instruments. This position requires a strong attention to detail to ensure all machined parts are free from defects and conform to design tolerances. The Machinist will collaborate closely with engineering and quality teams to optimize machining processes and troubleshoot any production issues. Ultimately, this role ensures the efficient and accurate fabrication of components that support the overall manufacturing goals of the organization. Minimum Qualifications: • High school diploma or equivalent., • Proven experience operating CNC machines and manual lathes in a machine shop environment., • Strong ability to read and interpret blueprints and technical drawings., • Proficiency in using precision measuring instruments such as micrometers and calipers., • Certification in CNC machining or related technical training., • Experience with advanced CNC programming and setup., • Familiarity with CAD/CAM software., • Background in tool and die making or maintenance., • Set up, operate, and maintain CNC machines and manual lathes to produce precision parts according to engineering drawings and specifications., • Read and interpret blueprints, technical drawings, and work orders to determine machining requirements and sequence of operations., • Perform precision measuring and inspection of finished parts using tools such as micrometers, calipers, and gauges to ensure compliance with quality standards., • Conduct routine maintenance and troubleshooting of machine tools to minimize downtime and maintain optimal performance. The required skills such as CNC machine operation, precision measuring, and blueprint reading are essential for accurately producing machined parts that meet strict tolerances. Daily use of machine tools and manual lathes allows the Machinist to shape and finish components with high precision. Deburring skills ensure that all parts are free from sharp edges and defects, contributing to product safety and quality. Preferred skills like CNC programming and CAD/CAM software knowledge enhance the ability to optimize machining processes and improve efficiency. Together, these skills enable the Machinist to deliver consistent, high-quality results while maintaining equipment and adhering to safety standards.