Trabajos business engineer en Copiague, New YorkCrear alertas

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology solutions including engineered systems, radio frequency ("RF") components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced printed circuit boards ("PCBs"). TTM stands for time-to-market, representing how TTM's time-critical, one-stop manufacturing services enable customers to shorten the time required to develop new products and bring them to market. Additional information can be found at Principal Radar Systems Engineer The Principal Radar Systems Engineer performs complex analysis, modeling and simulation tasks as part of a team developing advanced radar solutions. Duties and Responsibilities: \n • Support requirements flow-down, HW/SW Trade Studies, System Level Design Reviews, Integration Planning & Execution and Flight Testing activities.\n, • Develop radar signal processing algorithms using MATLAB for radar mode designs applicable to maritime, overland and air-to-air modes;\n, • Develop high fidelity Radar performance simulations using MATLAB, taking into account real-world Radar characteristics including RF Chain parameters and quantized/fixed point signal processing. Work with various engineering disciplines to provide simulated test vectors and analyze test results.\n, • Develop system to component level performance budgets using theory and simulation. \n, • Knowledge of Waveform Design and Signal Processing methods to meet customer detection and geolocation requirements. Experience with Synthetic Aperture Radar is also desired;\n, • Experience with Active Electronically Scanned Array technology and design. ;\n, • Analysis of Flight Test Data with ability to debug system performance issues in stressing customer environments including performance assessments;\n, • Ability to form team consensus on design choices and execution plans;\n, • Thrives in a collaborative environment working with other high performing engineers to solve very challenging Radar problems\n, • Coordinates with other technical resources to formulate and carry out studies in system design to advance the capabilities and cost effectiveness of core radar products\n, • MBSE experience with Cameo or equivalent is a plus\n\n Education and Experience: \n • Master's degree in Engineering, PhD degree preferred\n, • Minimum of 10 years of related development experience\n, • Must have a background that would permit the U.S. Department of Defense to issue a Secret clearance when necessary for work on a project that requires such a clearance.\n\n #LI-VT1 Compensation and Benefits: TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401k, flexible spending and health savings accounts, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available on the 1st of the month following date of hire. For some positions, only PTO and holiday benefits are offered. Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is: $140,909 - $247,805 Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology solutions including engineered systems, radio frequency ("RF") components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced printed circuit boards ("PCBs"). TTM stands for time-to-market, representing how TTM's time-critical, one-stop manufacturing services enable customers to shorten the time required to develop new products and bring them to market. Additional information can be found at Position Summary: TTM is an advanced-technology leader in highly sophisticated surveillance, communications, analysis and integration solutions. Our systems are deployed across a wide range of land, sea and air applications, providing our aerospace, defense and commercial customers with a distinct tactical advantage. In this role, the PCB Staff Design Engineer will design moderate to complex printed circuit board (PCB) layouts in the domain of Digital, Analog, Power & RF interconnect applications. This includes responsibility for circuit board layout conceptualization, (CAD application by means of Siemens Xpedition, PAD's or Cadence Allegro tool sets), detail design activities and value-engineering in support of internal TTM programs. Areas of emphasis/focus include physical design (CAD implementation)/documentation utilizing best practice of electrical IPC standards/methodologies with experienced approach to manufacturing and sustaining maintenance of legacy design projects. Complementary support provided by a combination of TTM Management, Field Application Engineering, Electrical/Mechanical Engineering and NPI Manufacturing teams. Duties and Responsibilities: Design Engineering Physical Design • PCB concept sketches for assistance in design layout estimating, • PCB design suggestions/trade-offs regarding initial engineering inputs, • Support changes to existing schematic diagrams using TTM suite of tools: OrCAD and/or DxDesigner \n • Place and route components ensuring that all electrical and physical specifications meet the detailed design requirements for each PCB design. Utilization of Siemens Xpedition/PAD's and/or Cadence Allegro required\n, • Participate in design reviews, interface with electrical, mechanical, manufacturing and process engineers to design proto-type and production printed circuit boards in accordance with TTM standards and quality procedures\n, • Provide layout feedback to design engineers as needed to ensure functionality and manufacturability of PCB designs\n, • Create fabrication and assembly drawings (AutoCAD 2023), parts list & incorporate changes to existing design documentation. Create and maintain component libraries\n\n\n, • Generate all output files (ODB++, Bill of Materials & PCB/CCA documentation) required for the manufacture of the board and assembly\n, • Product safety and EMI consideration during eCAD layout (UL, CSA, NEBS, Etc.)\n, • Standardization of electrical components and eCAD libraries utilizing IPC or vendor specific standards\n, • Exceedingly experienced with High-Speed PCB Design Constraints: Differential Pairs, Routing Topologies, Controlled Impedance, Length-matched Traces and Delay Tuning\n, • Demonstrated experience with RF PCB routing complexities. Implement layout rules for RF transmission lines (Micro-strip & Coplanar Waveguide), signal line isolation practices, via fencing & unique RF routing structures\n, • Audio (Analog & Digital separation) PCB best practice layout guidelines highly recommended\n, • Direct design experience related to multi-layer CCA and Flex PCB technologies \n, • Current knowledge of μ-via/HDI layout methodologies and best practices\n Education: Minimum Associates in Electrical Design/Drafting or BS in Electronic Technology. Related eCAD training certification/career experience will be considered in lieu of a degreed program with 10 year experience. Experience: Minimum of 10 years' experience with primary hands-on demonstrated proficiency of Siemens PAD's (VX2.8 or later), Siemen's Xpedition (VX2.14 or later) and/or Cadence Allegro/OrCAD (17.4 or later) product experience is required. Comprehensive understanding of electrical and mechanical engineering design practices related to printed circuit board electrical drafting and fabrication drawing creation experience is essential. Necessary familiarities with electrical design utilizing IPC standards, IAW IPC-2221/3 and associated specs is critical. Knowledge and methodology utilizing standard IPC Class III approach to design and manufacturing concerns is also necessary. BS or related degree in engineering or a related discipline \n • Related PCB design for the Aerospace and Defense sectors is preferred.\n, • CID/CID++ Certification for PCB Designers highly recognized as professional validation of design, documentation, and manufacturability skills within the industry.\n, • Solid oral communication and interfacing skills with technical and manufacturing personnel to resolve engineering tasks. Propose alternatives when faced with challenging PCB design situations including resolutions to non-standard problems.\n\n, • Appropriate understanding of vendor component data sheets for creation of schematic library and/or PCB footprints expected.\n #LI-VT1 Compensation and Benefits: TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401k, flexible spending and health savings accounts, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available on the 1st of the month following date of hire. For some positions, only PTO and holiday benefits are offered. Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is: $99,150 - $174,367 Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

Job Description Precipart. located in Farmingdale, NY, is looking to hire skilled and experienced Machinists to set up and operate CNC machines in our state-of-the-art facility featuring versatile machining capabilities, including: Lathe, Swiss Turning, Milling, Grinding, and Gear Cutting. We're looking for career focused Machinists with experience in any of these machining areas to help us craft high-quality components that support our customers in the medical, aerospace, space and industrial markets. Our machinists are the makers of cutting-edge components that will impact the lives of many. At Precipart, we engineer possible. From the needle on the first Gramophone, to helping mankind explore Mars, to pioneering parts for robotic surgery, we’ve helped propel the human race forward for five generations. With our unique combination of engineering, design and manufacturing expertise, we’ve worked with our clients to turn possibilities into possible. Join us in driving human progress through engineering! • Our Machinist career growth path has four distinct tiers, from Entry Level, Class C, Class B, to Class A. Each tier is designed to build upon your skills and experience, providing targeted development and increasing responsibilities to help you achieve your professional goals., • Our renovated facilities is equipped with state of the art equipment and is temperature controlled providing a comfortable environment that is focused on quality, safety and 5S., • We offer two work shifts, 1st (7:00am to 3:30pm) and 2nd shift (3:00pm to 11:30pm which includes a 10% shift differential)., • Set up and run up to two machines to fabricate precision parts, • Load and unload parts in the machine, • Start the machining cycle, • Inspect dimensions of finished pieces, • Change tooling as needed, • Hold tight tolerance of +/- .0002, • Experience setting up and operating CNC machines to fabricate precision components. We welcome candidates of all experience levels to apply. The hiring class and compensation for this role will be determined through our assessment process, taking into account your skills, experience, and qualifications. Additionally, the final level will be based on the business needs at the time of hire., • Should demonstrate interest and aptitude in this line of work, • Relevant technical Associate degree or CNC Machining certificate is preferred for candidates with minimal work experience, • Experience fabricating precision parts, • Experience working to very close tolerances (+/- .0002), • Experience with reading blue prints for mechanical components, • Experience inspecting parts and using inspection tools, • Good aptitude for shop math, • Experience with changing live tooling, • Able to work in a fast paced environment and meet production schedule, • Maintain a clean, organized and safe work area, • Able to stand for duration of shift and lift up to 40lbs WHAT WE'LL OFFER YOU IN RETURN:- • Base salary plus incentive program, • Paid time off, • Employee Referral Bonus, • Medical, dental, vision insurance, • Flexible Spending Account, • Health Savings Plan, • Life insurance, enhanced short term and long-term disability insurance and other voluntary insurance plans, • 401k Profit sharing plan, • Tuition Assistance, • National Employee Assistance Program, • 529 College Savings Program, • Professional development and training, • Clean and organized workspace and manufacturing facilities, • Company events and outings Precipart engineers, designs and manufactures high precision custom solutions for the world’s leading companies in the Medical, Aerospace and Industrial markets. We act as a partner across your entire manufacturing process by engineering precision gears, mechanical components, assemblies and motion control solutions, as well as delivering end-to-end capabilities and more. With offices in Switzerland, the U.S. and U.K, we are here to help you “engineer possible”. You should be proficient in: • GD&T, • CNC Tooling, • Brake & Suspension Systems, • G-Code, • Machine Setups for Production Runs, • CNC Mill (3-4 axis VMC) (Fanuc, Mazak, Haas, Kitamura, Dmg Mori Seiki), • CNC Lathe (2-4 axis) (Mazak, Okuma, Doosan, Dmg Mori Seiki, Nakamura), • CNC Swiss Lathe (Star, Citizen, Tsugami, Tornos), • CNC Lathe (5+ axis) (Nakamura), • Gear Machinery (Fellows, Gleason) $20 - $46 / hr

Job Description RouteSmart Technologies, a leader in vehicle route optimization software technology, is seeking a Cloud Engineer to join our IT Infrastructure & Security Department. This role will report directly to the Sr. Infrastructure & Security Engineer and is responsible for implementing, maintaining, and improving our cloud IT infrastructure, systems, and AWS environments. The Cloud Engineer will work closely with the DevOps and Product Development teams to ensure secure, scalable, and efficient cloud operations across our production and development environments. The typical base pay range for this position at the start of employment is expected to be between $120,000–$130,000 per year. RouteSmart Technologies, Inc. has different base pay ranges for different work locations within the U.S., and base pay will vary based on experience. This is a hybrid role; candidates must be able to commute to the office in Melville, NY or Columbia, MD. Candidates must reside within 50 miles and be available to work onsite several days per week. However, we will consider the right candidate for remote work if domiciled in one of the following states: Maryland, New York, Pennsylvania, DC, Virginia, Arizona, California, Colorado, Florida, Idaho, Illinois, Indiana, Minnesota, New Jersey, North Carolina, Oregon, South Carolina, Texas, Washington. Essential Duties & Responsibilities • Assist in researching, designing, and implementing secure, scalable, and cost-effective IT infrastructure, systems, security components, standards, and services., • Maintain, troubleshoot, and resolve issues related to infrastructure, systems, services, security, and accounts., • Continuously monitor the health and performance of the AWS infrastructure, systems, and accounts, identifying issues and implementing solutions for improved efficiency., • Analyze components, logs, services, and specific tools as needed., • Implement, enforce, and configure security policies, controls, services, identity management, and other security measures to protect from unauthorized access and cyber threats., • Stay up-to-date on technology trends and best practices, adapting to evolving cloud IT technologies and management approaches., • Communicate effectively and create accurate documentation of designs, configurations, processes, and procedures., • Collaborate closely with other team members on projects and tasks, ensuring seamless integration and support for IT initiatives., • 5+ years of experience with cloud infrastructure, systems, and security., • Minimum of 3 years of hands-on experience with AWS services., • Strong communication and collaboration skills., • Highly organized with strong analytical and problem-solving abilities., • Ability to work independently and as part of a team., • Commitment to continuous learning and delivering high-quality service. Education & Experience • Bachelor’s degree in Computer Science, Information Systems, Business Technology, or a related field—or equivalent experience., • Proficiency in IT infrastructure, networking, system administration, and security., • Solid experience with AWS services and concepts., • Experience with Infrastructure as Code (IaC) tools such as AWS CloudFormation or Terraform. RouteSmart offers its employees numerous opportunities for professional development. Our goal is to provide our employees the chance to learn and grow as the company grows. We recognize that our employees are our most valuable asset. The work they do is key to our ability to provide high quality service to our clients. We also recognize that our employees are unique individuals with their own lifestyle and interests. RouteSmart Technologies pays a significant share of the cost of benefits for our employees. We believe our investment makes good business sense by helping to create a positive and productive work environment. Among the benefits we offer are: • Medical/Dental/Vision/STD & LTD Plans, • Employer paid Life Insurance Plan, • Employee Training & Development, • 401(k) Retirement Savings Plan w/ Employer Match, • Vacation/Sick/Holiday Leave, • Tuition Reimbursement, • Flex hours, • Casual Dress RouteSmart Technologies is proud to be an equal opportunity workplace. Individuals seeking employment at RouteSmart Technologies are considered without regards to race, color, religion, national origin, age, sex, marital status, ancestry, physical or mental disability, veteran status, or sexual orientation. We do not accept resumes from headhunters, placement agencies, or other suppliers that have not signed a formal agreement with us. All candidates must have legal authorization to permanently live and work in the United States. This position does not qualify for sponsorship.

Job Description Machine Maintenance Engineer Manager - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding good quality people, which is why we will provide a screening to see if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The Facilities & Maintenance Engineer Manager will ensure that safety comes first in all efforts while directly supporting the needs of Production. This position will oversee the repairs, installations, and upkeep of facilities, equipment, and offices. This is a hands-on position where detailed knowledge of equipment and facilities is required. Their main duties include designing maintenance procedures, tracking budgets and expenses and performing inspections to find problems and make repairs. The position requires knowledge of manufacturing machines (CNC, Vacuum Braze Ovens, etc.) for installation, preventative maintenance, repairs, and upkeep. Candidates with these skills will be considered. SUPERVISORY RESPONSIBILITIES • Supervise employees of the maintenance department. Duties and Responsibilities: • Maintain a safe work environment while meeting the needs of production., • Ability to work independently or as a part of a team., • Perform routine work throughout the production floor., • Monitor, repair, and cite problems with process and production equipment., • Coordinate with various contractors to obtain the necessary repair information, required parts, and procedures to complete various projects and tasks., • Designing maintenance procedures, tracking budgets and expenses, and performing inspections to find problems and make repairs., • Train and supervise employees of the maintenance department., • Responsible for machine and facility maintenance., • Facilitates and assists Facility property insurance company by scheduling and participating in regular facility audits and follows up to address and implement corrective actions when deemed appropriate., • Negotiate contracts with outside vendors for execution of maintenance work., • Ensure operational efficiency of electrical equipment and mechanical systems through timely inspection and repair., • Ensure that company premises and facilities are kept in clean and hygienic condition., • Perform other duties and assignments as required. QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Machine & and Equipment Repair, • Ability to maintain, troubleshoot, disassemble, and repair production equipment in a safe manner while minimizing downtime., • Execute machine repairs, alignments, lubrication, coolant changes, etc., • Demonstrate a willingness to learn various systems throughout the multiple trades., • Electrical, HVAC, & Plumbing:, • Basic understanding of electrical systems, including DC and AC voltage ranging from 24V to 480V., • Be able to read, interpret, and modify electrical prints and schematics., • Experience in ladder logic, PLC’s, VFD’s, instrumentation and control devices., • Familiarity with the operation of gas and oil heating systems., • Familiarity with the general operation of air handlers, condensers, and evaporators EDUCATION AND/OR EXPERIENCE • Bachelor’s degree required., • Minimum of five to ten years of experience and/or training., • Background in general maintenance of manufacturing machines, • General knowledge of process equipment (i.e. automated systems, chillers, air compressors, hydraulics, pneumatics, etc.), • Demonstrate proficiency in the safe use of an array of hand and power tools., • Experience with MS Office is preferred. SAFETY • Support a safety culture on the production floor., • Observance of guidelines of the safe use, handling, and disposal of various chemicals used., • Knowledge of safety topics (i.e. Lockout Tagout, Arc Flash, Machine Guarding, Hazcom, DOT, RCRA, Material Handling, etc.) LEADERSHIP • The individual must be a problem solver., • Sound analytic skills and decision-making capabilities, • Strong results orientation and execution capability; Excellent strategic and tactical thinking, • Proven ability to effectively manage multiple priorities in a fast-paced environment and consistently meet deadlines and achieve desired results., • Demonstrated ability to lead, motivate and coach people in varying disciplines to achieve performance goals; Solid team building skills., • Excellent written and verbal communication skills; able to communicate as effectively on the shop floor as in the executive suite. PHYSICAL DEMANDS • Ability to lift 50lbs., • This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing throughout the day., • Fine manipulation and repetitive motion may be required for some duties. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $120,000 to $140,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job DescriptionTech/Electronics company located in Plainview NY is looking for a Production Engineer to join their team. Full benefits including 26 days off the first year and bonus. Being the Production Engineer, you will help with the engineering and quality agenda with the overall goal to improve the customer satisfaction. You are the main contact towards the suppliers and work as part of the business team together with the supplier to develop and secure the production process, handling of quality deviations, and secure compliance to all company requirements. About the assignment: The Production Engineer is responsible for Quality Assurance including to secure process control for key processes in production. Among other things, you:• Develop new manufacturing processes, and equipment to ensure manufacturing is efficient and effective.• Investigate and analyze problems and derive solutions in the manufacturing process.• Transfer R&D prototypes into series production phase and document the manufacturing processes.• Perform and create First Article Inspection Documents. • Perform Product audits and production risk assessments at suppliers • Develops the recipe with suppliers to match desired taste profile quality and nutrition. • Lead the Supplier Development for quality and manufacturing with responsibility to identify and implement actions and execution of SDP projects. • Lead industrialization of minor news development and contribute with competence to other new developments. Knowledge about Total Quality Management - University degree in Engineering or correspondingPrevious experience as Process or Production Engineer in manufacturing PreferredExperience of industrial production conditions and Lean manufacturing Contact Michael Panter for more details:

Job Description Fire Sprinkler Designer / Engineer with a minimum of 2 years experience in the fire sprinkler contracting industry. The qualified candidate will have knowledge in the fire sprinkler installation industry and will possess the ability to design and work on daily ongoing projects and complete them in a timely manner. Business hours are Monday through Friday 7:30 am to 4:30 pm. Overtime available. With over 50 years in business, we are currently looking to add competent and responsible individuals to our expanding workforce. We look to provide employees with the opportunity to succeed and create a working environment which promotes low turn-over and opportunities for advancement. Projects are performed in the 5 boroughs of New York City, Long Island (Nassau and Suffolk), and other areas in the region as needed. Applicants should have a working knowledge and experience with: • Designing fire sprinkler systems in their entirety, including standpipes, Siamese and FDC connections, valve lay-out and pump set-ups, riser placement, main supply and branch lines, and the use of different sprinkler heads, • Perform hydraulic calculations for sprinkler systems, • Detail the design for fabrication, prepare stock lists, cut sheets and prepare installation drawings, • Experience using SprinkCAD and/or AutoSprink (or similar software), HydraCAD, and Calculation Programs, • Extensive, comprehensive knowledge and use of AutoCAD, • Performing site visits and identifying field conditions not in accordance with design parameters, • Executing walk-throughs before, during, and after construction, • Job close-out including the assembly of as-built drawings, • Knowledge of working with threaded and mechanical fittings within the scope of design, • Working with 2D and 3D modeling of buildings and sprinkler system, • Coordination with customer and other trades/companies, • BIM Software and Coordination experience a plus Successful applicants should also possess: • The ability to identify deviations from bid to execution and the need for change orders, • A sense of responsibility required to review work and execute on a timeline, • The ability and/or experience supervising other engineers; as well as train junior engineers, • The understanding of field conditions and how they impact the work, • Comprehension of designing systems in accordance to code, which are cost effective, • Strong communication skills, both verbally and written We are a union company and provide new employees with the opportunity to take advantage of union benefits, such as standard paid vacation and sick time, health benefits, and 401(k) options. Compensation is commensurate with experience and capability. Clean driver’s license is required. Please forward resumes and at least three (3) professional references. Company DescriptionA & F Fire Protection Co., Inc. is a fire sprinkler and fire standpipe contractor offering full turnkey service including design, fabrication, installation, service and approvals. Founded in 1971, A & F Fire Protection Co., Inc. is a 2nd generation family business licensed in Nassau, Suffolk, New York City, New Jersey and Florida. Established in Massapequa and now located in West Babylon, New York as one of the industry’s premier providers of fire and life safety, A & F Fire Protection Co., Inc. is dedicated to meeting the needs of our customers. We are committed to our integrated business and delivery model.A & F Fire Protection Co., Inc. is a fire sprinkler and fire standpipe contractor offering full turnkey service including design, fabrication, installation, service and approvals. Founded in 1971, A & F Fire Protection Co., Inc. is a 2nd generation family business licensed in Nassau, Suffolk, New York City, New Jersey and Florida.\r\n\r\nEstablished in Massapequa and now located in West Babylon, New York as one of the industry’s premier providers of fire and life safety, A & F Fire Protection Co., Inc. is dedicated to meeting the needs of our customers. We are committed to our integrated business and delivery model.

Sr. Project Engineer We are looking for a Sr. Project Engineer to join our Target Rock team! You will direct all engineering aspects of projects related to design, development, and supply of high-pressure valves for nuclear power applications or industrial valve applications. Ensures valves supplied meet customer purchase order and specification requirements as well as all industry related codes. You will provide support to planning, purchasing, manufacturing, quality, contracts, programs, and assembly departments, as required, including proposals needing engineering inputs, engineering changes (ECOs), vendor support, quality audits and dispositioning of non-conforming hardware to resolve any in process issues and/or maintain product flow. Location: East Farmingdale, NY Salary/hourly rate: $94,700 to $136,900 Please note that the salary range information provided is a general guideline only, reflecting a position based in New York. Criteria such as the candidate's qualifications and relevant experience, the scope of the specific position, as well as market and business considerations will be evaluated when extending an offer. We Take Care of Our People Paid Time Off I 401K with Employer Match and Profit Sharing I Health and Wellness Benefits I Learning and Development Opportunities I Referral Program I Competitive Pay I Recognition I Employee Stock Purchase Plan I Inclusive & Supportive Culture * Your Challenge: \n • All Essential Functions listed on the Project Engineer (Energy Products) Job Description\n, • Assists the Engineering Manager in supporting Energy Products Sales bid and proposal activities.\n, • Assists the Engineering Manager in providing department personnel training.\n, • Participates and represents EP Project Engineering on cross functional teams.\n, • Assists the Engineering Manager in supervising day-to-day EP Project Engineering functions\n, • Review of specifications for compliance with proposed design.\n, • Preparation and release of design drawings and procedures.\n, • Preparation and review of design and qualification reports.\n, • Direction of qualification test programs.\n, • Interpretation of applicable customer specifications and industry codes (ASME BPVC, ASTM, ANSI, AMS, IEEE, etc.)\n, • Disposition of non-complying equipment in a timely manner.\n, • Resolution of assembly and test problems.\n, • Supports Energy Products Sales bid and proposal activities.\n, • Provide technical support for customers as required\n, • Ensure all project technical requirements are captured on the project's bill of material\n, • Ten (10) years of valve and/or power plant experience.\n, • Must be a US citizen\n, • Knowledge of valve products and industry requirements.\n, • Comprehensive knowledge of configuration management and design control\n, • Working knowledge of applicable ASME and other codes.\n, • Strong analytical and decision-making skills\n, • Knowledge of computer programs such as Microsoft Office Suite, Mathcad, and ANSYS\n, • Four (4) year Bachelor of Science degree in Engineering (Mechanical or Nuclear)\n, • Master of Science degree in Engineering (preferred)\n, • Professional Engineering Registration (preferred)\n, • Power Plant Systems training\n, • Valve design and manufacturing\n Compliance Statement This position may require exposure to export-controlled information and subject to additional security screening. In the event information provided during the security screening reveals ineligibility to access export-controlled information, any offer of employment may be reconsidered or withdrawn. Curtiss-Wright is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, ethnicity, color, sexual orientation, gender identity, physical or mental disability, age, ancestry, legally protected medical condition, family care status, marital status, religion, veteran status, national origin, or any other legally protected status. If you require accommodation during the recruitment process, please contact Talent Acquisition. For US Applicants: EEO is The Law - click here for more information. If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Talent Acquisition and we will make all reasonable efforts to accommodate your request.

CNC Programming Engineer We are looking for a CNC Programming Engineer to join our Target Rock team! As our CNC Programming Engineer you will interact with and support the machine shop production and personnel. The individual receives minimum direction from the Plant or Manufacturing Engineering Manager regarding methodology of manufacturing. The individual is responsible to generate methods in detailed format for Manufacturing Production. The individual will perform all necessary tool and fixture designs for both manufacturing and quality requirements. The individual will interact with both in-house manufacturing personnel, as well as vendor interaction in the support of all tool and fixture fabrication. The individual supports CNC Programming methods within our manufacturing facility. Location: East Farmingdale, NY Salary/hourly rate: $82,200 to $120,000 Please note that the salary range information provided is a general guideline only, reflecting a position based in New York. Criteria such as the candidate's qualifications and relevant experience, the scope of the specific position, as well as market and business considerations will be evaluated when extending an offer. We Take Care of Our People Paid Time Off I 401K with Employer Match and Profit Sharing I Health and Wellness Benefits I Learning and Development Opportunities I Referral Program I Competitive Pay I Recognition I Employee Stock Purchase Plan I Inclusive & Supportive Culture * Your Challenge \n • Generates Operation Sheets to support all phases of manufacturing within the facility. \n, • Identifies and designs necessary tooling and fixtures required to support manufacturing processes.\n, • Interacts with in-house and vendors in support of manufacturing components, as well as tool and fixture fabrication.\n, • Performs quotations for pricing inquiries, as well as manufacturing budget review for manufacturing processes.\n, • Maintain all applicable manufacturing project documentation.\n, • Additional responsibilities as assigned by Supervisor.\n, • Assists in the training of shop personnel to optimize defined manufacturing processes.\n, • Must be a US citizen\n, • Associate Degree minimum in Manufacturing/Mechanical Technology or equivalent related field or a commensurate level of related experience.\n, • 5 to 10 years experience performing manufacturing engineering responsibilities, inclusive of manufacturing methods, tool and fixture design, and budget and cost analysis. \n, • Working knowledge of Mastercam CAD/CAM software version 8.xx or greater.\n, • Ability to methodize complex parts with minimum supervision. Knowledge of machine shop practices and techniques.\n, • Design and overview tool and fixturing requirements for manufacturing components.\n, • Knowledge of raw materials and related machinability. Ability to define applicable feeds - speeds combinations for established manufacturing process.\n, • Ability to generate CAD drawings.\n, • Capable to analyze manufacturing equipment or tooling problems to efficiently implement solutions to economically solve these production problems in a timely manner.\n, • Broad knowledge of computer-controlled machine tools.\n Our Values Environmental, Social and Governance Founded in 1951 to meet the special severe service valve requirements of the United States Nuclear Navy, Target Rock is today the premier supplier of highly engineered, valves and related products to both the U.S. Navy nuclear fleet and the global nuclear power generation industry. The first Target Rock valves were installed on the U.S.S. Nautilus, the U.S. Navy's first nuclear powered submarine. To learn more, please visit us at Curtiss-Wright EMS - Target Rock (cw-ems.com) *Please note, benefits are country specific and may vary from location to location. #LI-NK No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Resumes submitted directly to any Curtiss-Wright employee or affiliate will not qualify for fee payment, and therefore become the property of Curtiss-Wright. Compliance Statement This position may require exposure to export-controlled information and subject to additional security screening. In the event information provided during the security screening reveals ineligibility to access export-controlled information, any offer of employment may be reconsidered or withdrawn. Curtiss-Wright is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, ethnicity, color, sexual orientation, gender identity, physical or mental disability, age, ancestry, legally protected medical condition, family care status, marital status, religion, veteran status, national origin, or any other legally protected status. If you require accommodation during the recruitment process, please contact Talent Acquisition. For US Applicants: EEO is The Law - click here for more information. If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Talent Acquisition and we will make all reasonable efforts to accommodate your request.

Job Description$95,000 - $135,000 + VIP Bonus $95000 - $135000 / year Vertafore is a leading technology company whose innovative software solutions are advancing the insurance industry. Our suite of products provides solutions to our customers that help them better manage their business, boost their productivity and efficiencies, and lower costs while strengthening relationships. Our mission is to move InsurTech forward by putting people at the heart of the industry. We are leading the way with product innovation, technology partnerships, and focusing on customer success. Our fast-paced and collaborative environment inspires us to create, think, and challenge each other in ways that make our solutions and our teams better. We are headquartered in Denver, Colorado, with offices across the U.S., Canada, and India. JOB DESCRIPTION As a Sr. Software Engineer, you will shape and improve the experience of key Vertafore customers. You will work cross-functionally across Vertafore, including Customer Support, Account Management, Product Management and Product Development to help guide customers and also contribute to the future growth of your team. You will work with a fast-paced, skilled team of business analysts, conversion engineers, developers and quality assurance engineers across multiple high-profile projects with development responsibility of assigned projects. Much of your success in this role will be dependent upon timely, clear, concise and effective verbal and written communication along with development of solutions that fully meet customer expectations with no/minimal defects or rework. Although not a primary duty compared to developing and supporting code, a software engineer at Vertafore also works directly with customers as part of a cross-functional team, which means you need to be a proactive self-starter, able to multi-task in a fast-paced environment and be service-focused to help nurture the customer experience. Additionally, you're a mentor and consultant, as well as a customer champion within Vertafore. Core Requirements and Responsibilities: Essential job functions included but are not limited to the following: * Innovates and crafts clean code * Confidently work with customers to describe technical concepts and recommend appropriate solutions whether pure custom or a mix of custom and core Vertafore products * Assist business analysts as needed with reviewing request information and documenting solution designs that align with customer expectations and business objectives/requirements * Document, architect and develop forward thinking technical specifications and solutions based on provided business requirements and/or specifications * Create advanced tables, views, stored procedures, indexes, constraints, cursors, user defined functions and triggers using T-SQL and SSMS * Optimize query performance and tuning indexes using Query Analyzer and other tools * Extract, transform and load (ETL) data * Responsible for interface design, documentation and unit testing * Develop automated solution deployments as appropriate * Deploy developed solutions within non-production environments and assist with Vertafore production release deployments * Working on/with small teams and completing tasks quickly with minimal supervision * Leading junior developers and providing proactive feedback to senior leadership * Mitigates the impact of technical decisions across the entire product * Drives and manages design conversations for features considering business need * Defines and creates artifacts/documents that are valuable to the team and external stakeholders * Incorporate new approaches, languages, and technologies into the team * Develops new features and supporting/bug fixing existing features * Diagnosis and troubleshoots issues across the whole stack – OS, DB, applications, JavaScript, and network; Provides solutions for complex, ambiguous problems through multiple stacks and products * Ensures quality of code within the team written or reviewed * Contributes to defining and enforcing procedures, standards, and methodologies related to software development * Is as a role model and mentors other team members technically and culturally * Follows industry trends and the open-source community * Interacts with customers to gather insights and translate technical concepts * Other duties as assigned Knowledge, Skills and Abilities: * Advanced troubleshooting experience and resolving production issues * Excellent written and verbal communication skills (internal and external customers/partners) * Ability to work within a team in a collaborative manner * Willingness to learn new technologies and experiment with innovation * Self-starter who is detail-oriented, quick-learner and deadline-driven * Advanced communication and interpersonal skills, able to diffuse tension and drive productive conversations, internally and externally. * Strategic problem solver with excellent analytical and critical thinking skills * An innate curiosity about how things work; Proactively acquires new skills and learns new tools and technologies to troubleshoot complex issues. * Comfortable and effective at making decisions across the product that help long-term maintainability, reuse, security. and performance * Applies knowledge gained and is effective at knowledge-sharing and assisting other team members. * Able to work with global, distributed teams * In-tune with high performance and high availability design/programming * Highly proficient with multiple database technologies * Strong in both design and implementation at an enterprise level * Communicate clearly to explain and defend design decisions * Desire to collaborate with the business, designing pragmatic solutions Qualifications: * Bachelor's degree in computer related field * Minimum 5 years of professional experience with Java/.NET and common frameworks. * Experience working in an Agile environment required * 3+ years of experience in security best practices for software and data platforms required * 3+ years of experience with Restful APIs required * 3+ years of experience with design, architecture, and implementation at an enterprise level required * Experience with Angular or similar technology preferred3+ years of experience with database technologies (e.g., Oracle, SQLServer, PostgreSQL, NoSQL, Cassandra, etc.) * Experience with Identity and Access Management preferred Additional Requirements and Details: * Travel required up to 10% of the time. * WFH Flexible * Occasional lifting and/or moving up to 10 pounds. * Frequent repetitive hand and arm movements required to operate a computer. * Specific vision abilities required by this job include close vision (working on a computer, etc.). * Frequent sitting and/or standing. * #LI-Hybrid THE VERTAFORE STORY Over the past 50 years, Vertafore has advanced the entire insurance distribution channel with the best software solutions in the industry. Today, we’re proud to say hundreds of thousands of Vertafore users rely on our solutions to write business faster, reduce costs, and fuel growth by increasing collaboration and streamlining processes. Vertafore leads the industry with secure, cloud-based mobile products that provide superior reporting and analytics, delivering actionable insight— right when customers need it most. We partner with other leading technology companies to deliver comprehensive solutions to improve the way our customers do business and serve their customers. The Vertafore Way Insurance is about relationships, and technology should make those relationships stronger. That’s why, at Vertafore, it’s our mission to transform the way the industry operates by putting people at the heart of insurance technology. By focusing on our customers, becoming better every day, and delivering results you can see, we provide the level of trust and security that insurance is all about. · Bias to Action: We're united by an innate drive to take action and make a difference in the technology and insurance spaces. · Win Together: We work together as one team, showing empathy and respect along the way. · Show Up Curious: We work to challenge one another to push boundaries and think beyond the box. · Say It, Do It: We honor every one of our commitments because integrity is important to us. · Customer Success is Our Success: We cultivate authentic relationships and follow up by actively listening to their needs. · We Love Insurance: We appreciate the impact insurance has on the world. Is this role not an exact fit for you? Keep an eye on our Careers Page for other positions! Vertafore is a drug free workplace and conducts preemployment drug and background screenings. The selected candidate must be legally authorized to work in the United States. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. Vertafore strongly supports equal employment opportunity for all applicants regardless of race, color, religion, sex, gender identity, pregnancy, national origin, ancestry, citizenship, age, marital status, physical disability, mental disability, medical condition, sexual orientation, genetic information, or any other characteristic protected by state or federal law. We do not accept resumes from agencies, headhunters, or other suppliers who have not signed a formal agreement with us.

Job Description RouteSmart Technologies, a leader in vehicle route optimization software technology, is seeking a Back-End Software Engineer to join our development team. This role will report directly to the Lead Software Engineer and is responsible for designing, coding, and supporting a variety of web applications and services. These include the development of a suite of cross-platform routing systems that feature complex GIS and mapping functionality, combined with user-friendly design and clear navigation. A basic understanding of RouteSmart products is essential to ensure accurate feature implementation. The typical base pay range for this position at the start of employment is expected to be between $100,000–$110,000 per year. RouteSmart Technologies, Inc. has different base pay ranges for different work locations within the U.S., and base pay will vary based on experience. This is a hybrid role; candidates must be able to commute to the office in Melville, NY or Columbia, MD. Candidates must reside within 50 miles and be available to work onsite several days per week. However, we will consider the right candidate for remote work if domiciled in one of the following states: Maryland, New York, Pennsylvania, DC, Virginia, Arizona, California, Colorado, Florida, Idaho, Illinois, Indiana, Minnesota, New Jersey, North Carolina, Oregon, South Carolina, Texas, Washington. Essential Duties & Responsibilities • Write well written, testable, and efficient code by using software development best practices that comply with the specifications provided, • Demonstrate the ability to identify and fix errors in code, • Design and construct database objects such as tables, indexes and stored procedures, • Write various back-end services that can be leveraged by web designers to create web products, • Write DML SQL commands, functions, and scripts, • Research new industry coding standards that can be used to improve the team’s ability to create secure, high-quality, high-performance applications, • Fundamental knowledge of multi-tiered, multi-threaded and multi-user applications, • Familiarity with relational databases (Postgres, MS SQL, etc.) and writing basic database queries, • Understanding of web application security as well as code development best practices Education & Experience • Bachelor’s degree in Computer Science, Information Systems, Business Technology, or a related field, • Experience with C# and .NET Core development using Visual Studio and other Microsoft development tools RouteSmart offers its employees numerous opportunities for professional development. Our goal is to provide our employees with the chance to learn and grow as the company grows. We recognize that our employees are our most valuable asset. The work they do is key to our ability to provide high quality service to our clients. We also recognize that our employees are unique individuals with their own lifestyle and interests. RouteSmart Technologies pays a significant share of the cost of benefits for our employees. We believe our investment makes good business sense by helping to create a positive and productive work environment. Among the benefits we offer are: • Medical/Dental/Vision/STD & LTD Plans, • Employer paid Life Insurance Plan, • Employee Training & Development, • 401(k) Retirement Savings Plan w/ Employer Match, • Vacation/Sick/Holiday Leave, • Tuition Reimbursement, • Flex hours, • Casual Dress RouteSmart Technologies is proud to be an equal opportunity workplace. Individuals seeking employment at RouteSmart Technologies are considered without regards to race, color, religion, national origin, age, sex, marital status, ancestry, physical or mental disability, veteran status, or sexual orientation. We do not accept resumes from headhunters, placement agencies, or other suppliers that have not signed a formal agreement with us. All candidates must have legal authorization to permanently live and work in the United States. This position does not qualify for sponsorship.

Job Description RouteSmart Technologies, a leader in vehicle route optimization software technology, is seeking a Senior Software Engineer to join our development team. This role will report directly to the Lead Software Engineer and is responsible for designing, coding, and supporting a variety of web applications and services. These responsibilities include contributing to the development of a suite of cross-platform routing systems that integrate advanced GIS and mapping capabilities with intuitive design and seamless navigation. A deep understanding of RouteSmart products is essential to ensure features are implemented accurately and effectively. The ideal candidate will also offer valuable insights from the end-user perspective, helping to shape a user experience that is both functional and user-friendly. The typical base pay range for this position at the start of employment is expected to be between $115,000–$130,000 per year. RouteSmart Technologies, Inc. has different base pay ranges for different work locations within the U.S., and base pay will vary based on experience. This is a hybrid role; candidates must be able to commute to the office in Melville, NY or Columbia, MD. Candidates must reside within 50 miles and be available to work onsite several days per week. However, we will consider the right candidate for remote work if domiciled in one of the following states: Maryland, New York, Pennsylvania, DC, Virginia, Arizona, California, Colorado, Florida, Idaho, Illinois, Indiana, Minnesota, New Jersey, North Carolina, Oregon, South Carolina, Texas, Washington. Essential Duties & Responsibilities • Lead and mentor other members of the development staff in coordination with the Lead Software Engineer, including the assignment of and review of tasks, • Keep team up to date on the latest relevant development technologies and be able to recommend, prioritize, and integrate these technologies into all RouteSmart products, • Develop maintenance roadmaps for all development frameworks, libraries, and tools so we can remain current for all critical patches and major software updates, • Write both DDL and DML SQL commands, functions, and scripts, • Full stack development: both client and server-side development skills are required, • Write well designed, testable, and efficient code by using software development best practices, • Demonstrate the ability to identify and fix errors in code, • Write various back-end services that can be leveraged by web designers to create web products, • Research new industry coding standards that can be used to improve the team’s ability to create secure, high-quality, high-performance applications, • Working knowledge of relational databases (Postgres, MS SQL, etc.) and optimizing database queries, • Working knowledge of GIS and similar mapping services extremely useful, • Understanding of web application security, session management, and code development best practices Education & Experience • Bachelor’s Degree in Computer Science, Information Systems, Business Technology, or a related field, • Experience with C# and .NET Core development using Visual Studio and other Microsoft development tools, • 10+ years minimum experience as a programmer writing both client and server-side components RouteSmart offers its employees numerous opportunities for professional development. Our goal is to provide our employees with the chance to learn and grow as the company grows. We recognize that our employees are our most valuable asset. The work they do is key to our ability to provide high quality service to our clients. We also recognize that our employees are unique individuals with their own lifestyle and interests. RouteSmart Technologies pays a significant share of the cost of benefits for our employees. We believe our investment makes good business sense by helping to create a positive and productive work environment. Among the benefits we offer are: • Medical/Dental/Vision/STD & LTD Plans, • Employer paid Life Insurance Plan, • Employee Training & Development, • 401(k) Retirement Savings Plan w/ Employer Match, • Vacation/Sick/Holiday Leave, • Tuition Reimbursement, • Flex hours, • Casual Dress RouteSmart Technologies is proud to be an equal opportunity workplace. Individuals seeking employment at RouteSmart Technologies are considered without regards to race, color, religion, national origin, age, sex, marital status, ancestry, physical or mental disability, veteran status, or sexual orientation. We do not accept resumes from headhunters, placement agencies, or other suppliers that have not signed a formal agreement with us. All candidates must have legal authorization to permanently live and work in the United States. This position does not qualify for sponsorship.

Job Description We are seeking an experienced, Administrative Assistant for full-time position. Our ideal candidate is motivated, has strong computer skills, is dependable with positive and professional disposition and is detail oriented. We offer a benefit package, long term, stable employment in an amicable, busy along office located in Farmingdale, NY. If this sounds like a good fit for you we invite you to apply today! A plus for candidates with Engineering, Construction industry or related experience. Will train providing qualifications listed are met. Qualifications for Administrative Assistant: • Minimum 1 year experience as Administrative Assistant/Support Office Experience or related position, • Associate or bachelor’s degree or equivalent work experience., • Proficient in Microsoft Suite, Outlook with knowledge of Excel, • Essential be reliable, have positive attitude and professional demeanor., • Ability to learn quickly, multi-task with attention to details., • Self-motivated, ability to work independently and still be part of a team., • Excellent written and verbal communication skills., • Liaison with Field Engineers for obtaining reports and general information., • Updating & auditing tracking logs and spreadsheets for Engineer Reports, • Preparing inspection reports via typing/data entry, • Communication and follow up with our Field Engineers, clients, and vendors., • Review Engineer Reports for quality control., • Salary based on knowledge, experience (Range $19 - $24/hourly), • Growth available for motivated individuals, • 401k Retirement with company Match, • Paid vacation, and sick time., • Paid observed Holidays. We are an Equal Opportunity Employer and welcome all resumes. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Company DescriptionIf you are looking to join of a highly regarded Engineering firm with long term career goals - then we are the right company for you! Special Testing is a stable company with 19 years in business providing employees an inclusive, amicable and busy environment. We offer competitive salaries are based on each person's experience and knowledge. Our full benefits package includes, 401k retirement with company match; paid time off for vacation, sick, personal; paid company observed holidays; medical with several options to choose from as well as options for dental, vision, life insurance, disability, hospital and more! Special Testing & Consulting, LLC was founded by Sam Sette, P.E and Bobby Bora who have earned a highly regarded reputation in the New York City construction industry for professionalism, technical knowledge and responsiveness to clients’ needs. Visioning the future of the industry with technological advances in communication and the need for speed in responsiveness, the company was formed to address these changing client needs. Both owners are proud to be actively involved in each project and remain available to their clients as well as their employees. The Company’s mission is not only to provide high standards of quality service to our clients, but just as importantly, to communicate the findings and results to our clients with clear concise reports and speed that our clients depend on Special Testing & Consulting, LLC has a full service in-house testing laboratory that is licensed by the New York City Building Department and successfully assessed by the Cement and Concrete Reference Laboratory (CCRL). It is operated under the supervision of a New York State Licensed Professional Engineer and all testing is performed by American Concrete Institute (ACI) and/or International Code Council (ICC) certified inspectors. Our laboratory includes a state of the art moisture controlled curing room and work stations for concrete testing and for soil testing; all with new equipment furnished in each station. As our company name suggests, we are fully equipped to provide Specialty Testing Services. The Company owns equipment including concrete coring equipment, rebar finders (pachometer), windsor probe and pin equipment, hydraulic jacks and steel test fixtures for pull testing, etc. so that we can service any special needs of a project. To learn more about our company, visit our website: . We are an equal opportunity employer and invite all resumes. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.If you are looking to join of a highly regarded Engineering firm with long term career goals - then we are the right company for you! Special Testing is a stable company with 19 years in business providing employees an inclusive, amicable and busy environment. We offer competitive salaries are based on each person's experience and knowledge. Our full benefits package includes, 401k retirement with company match; paid time off for vacation, sick, personal; paid company observed holidays; medical with several options to choose from as well as options for dental, vision, life insurance, disability, hospital and more! \r\n\r\nSpecial Testing & Consulting, LLC was founded by Sam Sette, P.E and Bobby Bora who have earned a highly regarded reputation in the New York City construction industry for professionalism, technical knowledge and responsiveness to clients’ needs. Visioning the future of the industry with technological advances in communication and the need for speed in responsiveness, the company was formed to address these changing client needs. Both owners are proud to be actively involved in each project and remain available to their clients as well as their employees.\r\n\r\nThe Company’s mission is not only to provide high standards of quality service to our clients, but just as importantly, to communicate the findings and results to our clients with clear concise reports and speed that our clients depend on\r\n\r\nSpecial Testing & Consulting, LLC has a full service in-house testing laboratory that is licensed by the New York City Building Department and successfully assessed by the Cement and Concrete Reference Laboratory (CCRL). It is operated under the supervision of a New York State Licensed Professional Engineer and all testing is performed by American Concrete Institute (ACI) and/or International Code Council (ICC) certified inspectors. Our laboratory includes a state of the art moisture controlled curing room and work stations for concrete testing and for soil testing; all with new equipment furnished in each station. \r\n\r\nAs our company name suggests, we are fully equipped to provide Specialty Testing Services. The Company owns equipment including concrete coring equipment, rebar finders (pachometer), windsor probe and pin equipment, hydraulic jacks and steel test fixtures for pull testing, etc. so that we can service any special needs of a project.\r\n\r\nTo learn more about our company, visit our website: . \r\n\r\nWe are an equal opportunity employer and invite all resumes. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.

We are a growing Eastern Long Island-based firm looking for a NY Professional Structural Engineer to join our team. We would relocate you to the beautiful Hamptons on the East End of Long Island. This person has 5–10 years of experience with HIGH-END residential experience. This role is in the field where our culture is hardworking, honest, and collaborative. We are proud of who we are and proud of what we do and how we do it! We offer a terrific salary based on experience and a bonus program like none other in the business. Great Health benefits, PTO, 401K with match, and many more perks! Structural Engineer Requirements • Bachelor of Science degree in Engineering required., • 5+years of Structural Residential Engineering experience., • Highly motivated self-starter with a professional attitude and ability to work well with other professionals and contractors., • Strong verbal and written communication skills with the ability to prepare clear and concise letters, memoranda, technical reports, and figures., • Experience in site development, grading, stormwater design, erosion & sediment control., • Responsive attitude when interacting with staff, peers, management, and clients., • Experience preparing design drawings using AutoCAD/Civil 3D., • Work within a team of professionals in developing site civil engineering plans and specifications for a multitude of land development projects, • Conducting site visits and assisting with construction oversight, • Civil engineering for site design including grading and drainage design, and utility design site, • Assist with the preparation of permitting, design, and construction documents, • Preparing plans and technical documents and reports

Job DescriptionJob Title: Level 1 Helpdesk Engineer Location: Hicksville, NY (Hybrid – Onsite Dispatch as Needed) Job Type: Full-Time About Us: Lincoln IT is a leading provider of IT solutions and managed services, proudly supporting clients across finance, legal, healthcare, and other key industries. Our team is committed to technical excellence, exceptional customer service, and delivering innovative technology solutions that drive business success. Position Overview: We are seeking a motivated and customer-focused Level 1 Helpdesk Engineer to join our Managed Services team. The ideal candidate will provide first-line technical support for end users, troubleshoot hardware and software issues, and perform onsite service dispatches as required. This role offers the opportunity to work across a variety of client environments, developing both technical and client relationship skills. Key Responsibilities: * Serve as the first point of contact for end-user support requests via phone, email, or ticketing system. * Troubleshoot and resolve technical issues related to desktops, laptops, printers, networks, and applications. * Escalate complex issues to Level 2 or Level 3 engineers as needed, ensuring timely and clear communication throughout. * Perform onsite dispatch visits to client locations for hands-on troubleshooting, installations, and remediation. * Maintain detailed and accurate documentation of all support activities in the ticketing system (ConnectWise preferred). * Assist with user onboarding and offboarding, including account setup, permissions, and hardware provisioning. * Follow defined SLAs and escalation procedures to ensure high-quality service delivery. * Participate in regular team meetings and ongoing technical training sessions. Requirements: * 1–2 years of experience in a Helpdesk, Desktop Support, or similar IT support role. * Strong troubleshooting skills in Windows operating systems, Microsoft 365, and general networking concepts. * Excellent communication and customer service skills. * Ability to manage multiple tasks and prioritize effectively in a fast-paced environment. * Reliable transportation and willingness to travel locally for onsite dispatches (travel reimbursed). * Familiarity with ConnectWise, IT Glue, or similar platforms a plus. * CompTIA A+, Network+, or other relevant certifications preferred. What We Offer: * Competitive salary and benefits package. * Opportunities for technical training and career advancement. * Exposure to a wide range of technologies and client environments. * Supportive, collaborative team culture. Powered by JazzHR QRrwMlQQTW

Bachelor's degree in technology, management information systems, business administration, or a similar field (Masters preferred). All job descriptions and required skills, qualifications and responsibilities for a particular position are subject to modification by the Company from time to time, in t

Strong understanding of safety protocols, engineering codes, and regulatory requirements to ensure a safe working environment. The Chief Engineer II maintains the physical structure and equipment of the building in optimal working condition, performing preventive maintenance and emergency, correctiv

With our expertise inAI-driven analytics, cloud solutions, cybersecurity, and next-gen infrastructure, we enable businesses to stay ahead in an ever-evolving digital world. We empower businesses-and their customers-to achieve more through innovation, automation, and intelligent insights. AWS Busines

Airgas is hiring for a Business Development Manager in Islandia, NY!. Business Development Manager will drive new growth and expand our customer base. In this role, you will be responsible for identifying, pursuing, and closing new business opportunities across healthcare and life science industries

Determining business needs and identifying weaknesses. Assessing and analyzing business practices and procedures. Organizing and managing business projects.

Proven experience building excellent client relationships through offering beneficial, insightful and strategic insights into their businesses. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, train

Business Analysis Job Duties: Elicits, analyzes, specifies, and validates the business needs of stakeholders, be they customers or end users. Develops and conduct peer reviews of the business requireme

Represent NYBCe in the media and at high level business meetings as needed. Makes recommendations to improve business unit practices and processes.

Bachelor's Degree in Engineering, Business, or related field. As we expand our distributed generation business, we seek an experienced Business Development Manager to spearhead our North America market penetration strategy. Business Development Qualification/Requirements:.

Bachelor degree in business, engineering, or a related field, preferred or equivalent combination of education and experience. Share market pressures with engineering leadership so emerging technologies can be evaluated for deployment in the market while driving orders for new business opportunities

Developing goals for the development team and business growth and ensuring they are met.

We are seeking an experienced Senior New Business Sales Executive to drive net-new business by selling the eMoney platform to enterprise clients across the United States. Achieve sales targets and drive net-new business within enterprise accounts.

Review Coupa release notes and provide business owners with a walkthrough of top enhancements that may impact or improve current processes. Strong Verbal and Written Communication skills, with the ability to work with Business Owners at different levels. In this role, you will collaborate with techn

Our Business Development teams are relentless about building trust-based, value add relationships with clients, delivering long-term client value, and building their book of business over time. The Business Development team is a FULLY REMOTE position that can reside anywhere in the US and will play

Business Manager- Tech Bus Ops. We are Optimum, a leader in the fast-paced world of connectivity, and we're on the hunt for enthusiastic professionals to join our team! We understand that connectivity isn't just a luxury anymore it's a necessity that empowers lives, fuels businesses, and drives inn

Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location.

Consistently identify new potential referral sources and cultivate productive business partnerships that lead to business growth and increased revenue. Conduct Business Development Activities to Achieve Company Growth Goals. Develop and implement targeted marketing campaigns to enhance CompassCare��

The card and non-card, business-to-business ('B2B') payments space represents a significant new opportunity for Mastercard. You have Business to business (B2B) network, procure-to-pay and ERP awareness. Strong understanding of one or more key corporate business roles, specifically, procurement/sourc

MUST be a Site Manager to present in the Real Estate industry.Not looking for a Property Manager.NOT looking for Portfolio Managers.A bachelor's Degree is required.Real/Estate- Residential, Commercial experience.Location: Flushing, Queens, NY.Not specifically seeking individuals with expertise in po

Supporting both of our business segments is our corporate and Hubbell Unified Business Solutions teams that provide consistent process, tools technologies across our businesses. We are seeking a highly motivated and versatile Product Development Engineer to support our growing portfolio of Power, En

Identify and develop new business opportunities in residential and commercial markets. Cultivate and maintain relationships with trade partners to drive referral business. As the first national smart space installation and services company, we're growing fast and are seeking a Business Development M

Launch Your Career in Commercial Real Estate with Christie's International Real Estate – Commercial Division.Now Recruiting New Agents in New York, New Jersey & Connecticut.Ready to break into the world of commercial real estate? At.Christie’s International Real Estate.If you’re driven, entrep

Uses data-driven analytics, trend insights, and business acumen to develop and communicate the strategic plan (3yr forecast); the annual operating plan; and monthly forecasts. In partnership with cross-functional stakeholders, conducts ad-hoc analyses to support multiple business channels including

Corporate Partnership & Business Development Specialist. The Corporate Partnership & Business Development Specialist will design and execute a strategy to form strategic alliances between Greenwich Psychology Group and elite organizations. This role bridges psychology, performance consulting, and co

Our Business Development teams are relentless about building trust-based, value add relationships with clients, delivering long-term client value, and building their book of business over time. Progression within Business Development Executive Roles:. Please note that actual salaries may vary within

Business Developer (Business Development Consultant) to join our team. Capability to analyze the semiconductor business environment and forecast business opportunities short and long term. Identify and pursue new business opportunities to expand NT-ware's market presence.

The Business Development Manager, Apheresis and Cell Sourcing is a strategic, client-facing role responsible for driving the growth of CCS's clinical collection network, including apheresis services, through partnerships with medical centers, clinical sites, and cell sourcing organizations. You will

With Shep & Ian still at the helm today, vineyard vines has experienced exponential year over year growth and now operates over 120 retail locations including an outlet division, a successful e-commerce business, domestic distribution center, and expanding corporate headquarters.

We are Optimum, a leader in the fast-paced world of connectivity, and we're on the hunt for enthusiastic professionals to join our team! We understand that connectivity isn't just a luxury anymore - it's a necessity that empowers lives, fuels businesses, and drives innovation. Small to Medium Busine

As a Borders Business Development Manager, you will not only bring expertise in business development but also play a critical role in driving transformation and innovation within the business unit (BU). Business growth: Work with Borders Product manager and local/ regional sales & business developme

We are seeking a Manager, Business Process Improvement to act as a change agent, enabling successful adoption of new technology and business processes across PepsiCo's agriculture operations. This role will partner with global, sector, and market teams to ensure process alignment, smooth transitions

We are Optimum, a leader in the fast-paced world of connectivity, and we're on the hunt for enthusiastic professionals to join our team! We understand that connectivity isn't just a luxury anymore - it's a necessity that empowers lives, fuels businesses, and drives innovation. Sell Coax based Intern

Develops strong relationships with decision makers in target prospect and customer accounts, leading to the sale of Lighpath Business products and services to solve identified business problems. The Enterprise Account Executive is responsible for developing advanced relationships within Lightpath Bu