Cad jobs in Merrick, New YorkCreate job alerts

Job DescriptionPower-Flo Technologies is seeking a motivated individual to join our team as an HVAC Controls Technician. We are a two location temperature controls distributor specializing in providing engineering, materials, and startup assistance for temperature control systems. We are looking for someone to work independently in the field to startup, service, and support these systems in coordination with our in-house engineering team. What Will Make You Successful in This Role? • Experience and certification with programming either Johnson FX controllers (CCT) (preferred), Honeywell Spyder, and/or Niagara AX/N4 (any brand)., • Experience with ACAD, or similar CAD software., • Knowledge of industry-standard communication protocols such as BACnet MSTP, BACnet IP, Niagara, JCI N2, Modbus, Lon, Etc., • Niagara N4 certification., • 3 years of building automation experience required., • Strong understanding of commercial HVAC systems operations., • Ability to read mechanical prints and schematics., • Ability to work independently and in a team setting., • Basic knowledge regarding use of a PC (Microsoft Word, Excel, Outlook)., • Competent with the use of electrical test equipment, i.e., Multi meter, shop tools, hand tools, pneumatic tools., • Mechanical aptitude required., • The ability to troubleshoot basic electric and electronic circuitry including reading and interpreting electrical and electronic diagrams., • Valid and clean NYS Driver's License to operate company vehicles., • Ability to Stand for 8 Hours, • Ability to lift 50 pounds, • Ability to work on elevated platforms, • Ability to climb ladders, • This position may require standing, stooping, bending, kneeling, crouching and/or reaching Salary Range: $60,000 – $100,000/year Benefits • Health Insurance (medical, dental, vision), • PTO Program and Paid Holidays, • 401K, • EAP, • ESOP (Employee Stock Ownership Plan) We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description ACS System Associates Inc. is currently seeking a Estimator to join our Estimation Department as an integral part of our team. The need is for an HVAC Estimator to evaluating bid specifications and drawings, ensuring that all items required are completed in the field of duct work / piping/ ATC design in regards with HVAC systems. Must be proficient in understanding how to read all versions of CAD drawings and plans, should possess strong communication and coordination skills, and should be self-motivated and detail oriented, with initiative to deliver innovative designs. Key Duties & Responsibilities: • Prepare detailed cost estimates for all HVAC/R systems, • Work closely with Operations to determine budgeting and strategic goals, • Interface with Project Managers to ensure that projects are delivered per estimates and consistently refinine the estimating formulas, • Keep accurate database of prospective projects, • Prepare Bids and processing accordingly, • Communicate with vendors and subcontractors; to determine cost-effective solutions., • Ensure that there is proper coverage from subcontractors on bid day., • Aggressively follow-up with subcontractors to ensure that bids are received., • Ensure all bids are priced correctly by subcontractors and vendors i.e. Tax Exempt., • Confirm pricing received reflects the correct scope of work., • Review blueprints and accurately delineate the scope of work required for the project., • Consistently follow up on submitted bids and budgets with GC to close business., • Negotiate Change Orders Requirements: • Min 5 years of experience with HVAC, plumbing, and sprinkler estimating, • Bachelor's degree in Mechanical Engineering, Construction Management or related field, • Proficiency in estimating software and tools and excellent mathematical and analytical skills, • Advanced knowledge of estimating strategies and techniques, • Knowledge of estimating software programs plus proficiency with Excel, • Professional, ethical and able to maintain confidentiality, • Proven Estimating experience Why ACS: Our mission is to provide our employees with an honest and helpful working environment, where every employee individually and collectively, can dedicate themselves to providing our customers with exceptional workmanship, extraordinary service, and professional integrity. Our commitment to this mission will allow ACS System Associates Inc. to continue our success and reputation as a premier mechanical construction company. The Mechanical Construction industry is an exciting area in which to work, and we will continue working to ensure ACS System remains on the cutting edge. In an industry that is an ever-shifting structure of priorities and demands, we maintain our integrity and continue to persevere. We continue to stay disciplined, and never compromise our promise. We are diligent in our consistent effort to Assure Customer Satisfaction, Safety, and Professionalism. This commitment gives us the advantage to deliver exceptional quality projects which meet budget and schedule goals. Our Associates have continued to meet the challenges of our field and thrive. We are very proud of where we are today and excited about where we are headed. Primary Location: United States-New York-Hicksville Other Locations: United States-New York-Westbury Other Locations: United States-New York-Mount Vernon Applicants must be authorized to work in the U.S. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, or any other characteristic protected by law. Company Description* With a $ 250 Million Bonding Line, ACS is a Major Player in Government and Private Construction Contracts. • Job Stability to our Team Members is ensured by Dozens of Ongoing Contracts at all times in NYC 5 Boros ,L.I, Ct and the vicinity., • We are looking forward to expand our Team to take on challenging assignments as we embark on Major Expansion., • Our Associates are our Most Valued and Greatest Corporate Asset.We seek to maximize this Asset by assisting all our Associates ,in every which way, in realizing their Highest Professional Potential.* With a $ 250 Million Bonding Line, ACS is a Major Player in Government and Private Construction Contracts.\r\n\r\n* Job Stability to our Team Members is ensured by Dozens of Ongoing Contracts at all times in NYC 5 Boros ,L.I, Ct and the vicinity.\r\n\r\n* We are looking forward to expand our Team to take on challenging assignments as we embark on Major Expansion. \r\n\r\n* Our Associates are our Most Valued and Greatest Corporate Asset.We seek to maximize this Asset by assisting all our Associates ,in every which way, in realizing their Highest Professional Potential.

HVAC Drafter Location: Farmingdale, NY Employment Type: Full-time, Permanent Salary: Up to $90,000 3D drafting experience required A well-established HVAC firm located in Farmingdale, NY is seeking an experienced HVAC Drafter to join their team. This role involves creating detailed technical drawings and plans for heating, ventilation, and air conditioning (HVAC) systems. The drafter will work closely with engineers, project managers, and other design professionals to transform specifications and concepts into precise CAD drawings for construction and installation. Responsibilities: • Create accurate HVAC layouts, including ductwork, piping, and equipment plans, using AutoCAD, Revit, or similar software, • Interpret architectural and engineering drawings, specifications, and relevant building codes, • Develop simple 3D models of HVAC duct and piping systems using AutoCAD MEP and Revit, • Update 2D drawings to 3D formats for enhanced visualization and coordination, • Provide 3D layout support to identify spatial conflicts and improve design accuracy, • Coordinate with engineers and project managers to meet design intent and project goals, • Revise drawings based on markups, field changes, and updated requirements, • Assist with load calculations, equipment selection, and basic HVAC design tasks, • Maintain compliance with drawing standards and applicable codes, • Associate degree or technical certification in drafting, mechanical design, or a related field, • Proficiency in AutoCAD, Revit, and other HVAC-related design software, • Solid understanding of HVAC systems and terminology, • Knowledge of building codes, ASHRAE standards, and construction documentation, • Strong attention to detail and organizational skills, • 3+ years in HVAC drafting or mechanical drafting roles, • Experience with commercial, residential, or industrial HVAC projects, • Familiarity with BIM (Building Information Modeling) workflows

The Sustaining Engineer is responsible for leading and managing the design, development, and implementation of electronic and embedded systems. This role involves utilizing extensive expertise and leadership skills, driving innovation, ensuring compliance with industry standards, and providing mentorship to junior team members, contributing to the success and advancement of complex engineering projects within Hubbell. The Sustaining Engineer may also review vendor capability to support product development. Compensation will be based on experience and qualifications and will be discussed during the interview process. The salary range for this role is $130,000 - $140,000 annually and offers a competitive benefits package. #LI-KR1 Every day at Hubbell is different and you'll contribute in many ways. On any given day, you'll make a difference by: • Participating in the development of multiple products simultaneously. Taking on a lead role for selected development projects, managing the NPD process from design definition through design capture and verification to the hand-off to production., • Leading and participating in project reviews and in requirement gathering meetings with sales/marketing and systems engineering groups., • Being responsible for design flow from architecture through prototype testing and production documentation. This includes circuit design, component selection and evaluation, hardware verification and validation of new products., • Performing final design reviews on all circuits and board designs, including mechanical aspects, needed to be released for prototyping and for production., • Guiding creation of hardware bring-up and production test procedures and of plans to test/validate new designs. Assisting with the design verification and validation to ensure that the completed design meets the requirements., • Performing product sustaining activities for addressing hardware related field issues as needed. Bachelor of Science in Electrical or Computer Engineering, Computer Science, or equivalent degree (required) Proficiency with a proven track record in working with designs utilizing microprocessors, microcontrollers, digital signal processors, field-programmable gate arrays, high-speed A/D-D/A conversion, and power conversion (required) 6-10 years of embedded hardware design experience on industrial products Proficiency in CAD software and other relevant tools for electrical design, analysis, and simulation (required) Experience with test equipment and measurement methodologies for electrical systems Understanding design verification/validation and regulatory compliance testing (UL, CSA, FCC). Experience with C/C++ and Python preferred. Hubbell Incorporated Hubbell creates critical infrastructure solutions that power our customers, communities, people and the planet. Our company is strategically aligned around enabling grid modernization and electrification. As more products plug in to an aging grid, Hubbell solutions enable the transition to a more reliable, resilient and efficient energy infrastructure. Founded in 1888 our innovation has made us a leading global manufacturer of high quality electrical and utility solutions enabling customers to operate critical infrastructure reliably and efficiently. The company operates in two segments. Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications and Hubbell Electrical Solutions (HES) are essential to managing power across a wide range of industries and applications. Our vertical market solutions can be applied to markets including Data Centers, Renewables, Commercial Buildings, Industrial, Telecom and Transportation. Supporting both of our business segments is our corporate and Hubbell Unified Business Solutions teams that provide consistent process, tools technologies across our businesses. We are committed to operating sustainably and ethically while promoting an inclusive and supportive culture for our people to grow and develop in their careers. Our employees proudly work and serve our communities from our headquarters in Shelton, CT, across the United States and around the globe. Hubbell Utility Solutions Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications. HUS provides the critical components that allow the grid to reliably transmit and distribute energy, as well as the communications and controls technologies to make the grid smarter and more flexible. Hubbell Incorporated, its subsidiaries and affiliates, is an EO Employer AA: M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender identity or any other protected class. The above summary of position responsibilities and requirements is not intended, and should not be construed, to be an exhaustive list of duties, skills, efforts, physical requirements, or working conditions associated with the position. It is intended to be an accurate reflection of those principal position elements essential for making decisions related to position performance, employee development, and compensation.

What You’ll Do** Depending on the task phase, you may be asked to complete one or both of the following: - Record screen sessions demonstrating specific tasks, accompanied by clear verbal narration explaining each step - Annotate screenshots of professional software by drawing precise bounding box

Job Description Senior Structural Engineer - Garden City, New York About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. EDUCATION AND/OR EXPERIENCE • Bachelor’s degree or higher in Mechanical or Aerospace Engineering or a related field, • Master’s degree preferred, • 5+ years of experience in a similar role SUMMARY OF POSITION The Senior Structural Engineer is responsible for leading intricate analyses to ensure our products will meet customer requirements. This role requires rigorous application of structural mechanics while adhering to manufacturing, testing, and quality best practices. The Senior Structural Engineer will engage in problem-solving daily and regularly present results to internal and external stakeholders. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Perform critical thermomechanical analyses of complex aerospace hardware through commercial analysis packages and hand calculations, working closely with the design team to rapidly iterate on new product development, • Peer review analyses produced by other structures engineers and subcontractors, • Liaise with customer on heat exchanger requirements, • Generate technical reviews, reports, and other engineering documentation, • Champion process improvement activities related to structural analysis, • Review and approve design changes and test procedures, • Support disposition of technical issues which occur during manufacturing, • Support customer reviews and inbound requests, • Support proposals and future product development QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Extensive experience performing structural analysis for mechanical components (aerospace preferred), • Expertise in commercial FEA software packages, • Expertise in material properties and selection process, • Knowledge of design principles, manufacturing processes, and assembly techniques, • Knowledge of 3D modeling and CAD software, • Knowledge of heat and mass transfer, fluid mechanics, and thermodynamics, • Knowledge of drawing ANSI standards and GD&T procedures, • Highly motivated self-starter, • Strong problem-solving skills, • Excellent attention to detail, • Strong verbal and written communication skills, • Capable of thriving in a fast-paced environment PHYSICAL DEMANDS • Ability to work for prolonged periods on a computer or in a lab environment, • Ability to move equipment up to 25 pounds OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $105,000 to $150,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job Description Lead Design Engineer - Garden City, New York About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. EDUCATION AND/OR EXPERIENCE • Bachelor’s degree or higher in Mechanical or Aerospace Engineering or a related field, • 8+ years of progressive engineering experience SUMMARY OF POSITION The Lead Design Engineer is responsible for overseeing the design and development of complex mechanical parts and assemblies. This role focuses on leading technical decision-making, ensuring design integrity, and driving innovation across projects. The Lead Design Engineer will play a key role in cross-functional collaboration, mentoring, and continuous improvement initiatives. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Lead the development of 3D models of complex aerospace hardware, • Prepare design concepts, sketches, layouts, technical drawings, and BOMs, • Serve as the primary technical point of contact for design-related decisions across new and existing products, • Interface with internal and external stakeholders to ensure manufacturability, • Certify technical reviews and other engineering documentation, • Lead cross-functional activities to sustain existing designs, • Manage complete implementation of engineering design change requests, • Lead resolution of technical issues during manufacturing and customer interactions, • Champion process improvement activities related to design engineering, • Support proposals and future product development QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Extensive experience as a Senior Mechanical Design Engineer, Technical Lead, or similar role, • Expertise in parametric CAD design, • Expertise in drawing ANSI standards and GD&T procedures, • Expertise in manufacturing techniques and processes, • Knowledge of material properties and selection process, • Knowledge of FMEAs and quality assurance processes, • Knowledge of relevant MIL-STD’s, • Familiarity with heat and mass transfer, fluid mechanics, thermodynamics, and structural mechanics, • Highly motivated self-starter, • Strong problem-solving skills, • Excellent attention to detail, • Strong verbal and written communication skills, • Capable of thriving in a fast-paced environment PHYSICAL DEMANDS • Ability to work for prolonged periods on a computer or in a lab environment, • Ability to move equipment up to 25 pounds OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $120,000 to $160,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job DescriptionSignature is looking to add a Field Consultant to cover the following counties in NY: Kings, Nassau, Suffolk Are you looking for a new career that allows you to work independently, is flexible, and challenging everyday, then we have a new and exciting career for you! For 30 years, Signature Companies () has been the industry leader and innovator in providing quality, professional and unparalleled service to our client partners. At Signature Companies we are a High Value Insurance information provider, dedicated to superior customer service, superior quality, and superior time service. Signature Companies is looking for self-starting, self-motivated and self-directed independent contractors (1099) who are creative and knowledgeable in their field and who possess an entrepreneurial spirit to work an area of their choosing, around the area in which they live. We can provide a supplement to your current income or become your main source of income. Experience in Insurance Adjusting, Home Appraisals, Real Estate or Construction is a plus. Experience using Rapid Sketch, Xactimate, CAD or other diagramming programs will be helpful. As a Field Consultant, you will be responsible for scheduling and conducting on-site High Value Property Surveys. This involves coordinating and completing surveys within your own schedule, managing work assignments you accept and timely completion of web-based reports. You will visit properties, take photos and measurements, and make note of issues which should be brought to the underwriter’s attention. Our experienced and dedicated Field Management team will provide mentoring and support to help you learn and excel at Signature Companies. Details of position: • Work from your home office., • Professionally interact over the phone, via email, and in-person with homeowners and insurance agents., • Drive to and conduct on-site property surveys on high value homes as per customer specific guidelines and procedures., • Identify and document the construction materials/characteristics and unique features of the home., • Obtain measurements of the home and other structures on the property., • Generate an estimated replacement value of the home and identify major hazards., • Communicate the information gathered during on-site inspection in loss control 360 accessed through the Signature website RequirementsRequirements and Tools needed: • Prior underwriting experience is desirable., • Prior inspection experience on residential homes is desirable., • Loss control experience desirable., • Strong oral and written communication skills, • Professionalism is key., • Construction experience desired, but not required., • BA or BS degree desired, but not required., • Must have smartphone, tablet and personal computer., • A late model reliable vehicle and Auto and General Liability Insurance., • High speed internet, Digital Camera or Smart phone with 16mp camera or greater, measuring devices such as: laser, soft tape measure, or measuring wheel.

Job Description Summary: Parabit Systems, a well-established and rapidly expanding company in the security and self-service equipment industries, is currently seeking a Estimator who will work directly with all department Staff, Supervisors & Managers to setup, reconcile and report on the progress and material/labor costs on all products, jobs and projects. The ideal candidate will have strong organizational, Microsoft Office and CAD drawing review skills, familiar with PC peripherals, basic knowledge of electronics, detail oriented, always willing to ask questions to resolve all concerns and possess an exceptional work ethic. Duties and Tasks: • Identify factors affecting costs, such as product development (NRE's) production time, materials, and labor., • Ability to analyze drawings and other documentation to prepare time, cost, materials, and labor estimates., • Calculate, analyze, and adjust estimates., • Recommend ways to reduce costs without sacrificing quality., • Work with sales teams to review RFP's and new product requests and prepare estimates and bids for clients., • Maintain records of estimated and actual costs., • Provide cost management support and insight for Manufacturing and Product Assembly BOM activities., • Prepare required reports on ongoing jobs/projects, summarizing job/project to-date material and labor costs over/underestimated figures and verify latest BOM costs and report on BOM changes., • Participate in all BOM related support for Design, Engineering, Production and Sales Departments., • Recognize, identify, and correct data errors and process errors, ensure errors are corrected, identified, and reported., • Establish List, Reseller and Distribution channel pricing per predefined markups and discounts., • Work on fixed deadlines, plan work in advance and work efficiently and accurately., • Ownership of the Product Inventory System and content, product/hierarchy numbering, dims, weight, pictures, production drawings and descriptions., • Other duties as deemed essential for the position. Skills/Experience/ Education: • Bachelor's degree or higher., • Reads manufacturing drawings (CAD/CAM) and technical documents to prepare estimates., • Advanced proficiency in Excel., • Familiarity with metal fabrication, • Basic knowledge of electrical components or technical background., • Vendor Management experience, • Experienced with tracking and managing BOM costing revisions., • Experience in Supply Chain Cost Analysis., • Understanding of planning, sourcing, and procurement., • Attention to detail and effective time management skills., • Self-motivated, ability to initiate and follow tasks through to completion and can work independently., • Ability to work in a fast paced, cross functional environment while maintaining composure, focus and a positive attitude., • Proficient and transparent communication skills (verbal, written, listening)., • Good Computer skills (Microsoft Office) 40 WPM typing., • Strong math and excel skills., • Must be able to Multi-task., • Exceptional interpersonal skills., • Strong organizational skills., • Knowledge of Fishbowl is a plus., • Ability to collaborate with cross-functional teams in a rapidly shifting work environment, to deliver value-added results. Parabit Systems is focused on growth and growing leaders. Parabit Systems is an equal opportunity employer, offering a great work environment, and challenging career opportunities. Please email your resume to , or fax resume to 516-253-0209. All employment candidates must pass: a NON-DOT Drug screening, Criminal and Credit Background Check and a Driver License Check prior to employment.

Job Description Schivo Medical, a contract manufacturer of medical devices and surgical tools on Long Island is looking to hire a CNC Programmer /set up person. Come join the team and work with professionals that make parts that help enhance people’s lives. CNC Programmer and Set Job Overview: Program and Set-Up various CNC machines. Essential Duties & Responsibilities: • Develop CNC Programs, • Set up CNC machines., • Develop CNC machining process for new projects., • Maintain effectiveness and efficiency., • Apply the best strategy and techniques to obtain the most efficient and capable process., • Selecting appropriate cutting tools and work-holding tools for new projects, • Provide training for machine operators for each new set up/process., • Update and modify outdated programs, implement the latest cutting techniques, and understanding of lean manufacturing., • Troubleshoot minor machine errors, program errors., • Maintain quality and safety control standards., • Successfully pass First piece inspection and deliver capable process to production team., • Effectively work with other departments to achieve the common goal Necessary Education, Skills, and Competencies (including licensing and certifications): • High school diploma or GED/trade school certification, • 3 years’ set up experience in house or previous employer., • Programming: in-house training and trade school or minimum 2 years programming experience with Swiss Screw machines (Tornos), • 5 years min Swiss Screw Machine operations experience, • In-house QSP training Benefits: • 401(k), • 401(k)match, • Medical insurance, • Paid time off, • Employee referral, • Voluntary Benefits, • STD/LTD Disability, • Life Insurance, • Pet Insurance, • Discount on vendor products Schivo Medical is an Equal Opportunity Employer. All qualified applicants will receive employment consideration without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, genetic information, disability, or protected veteran status.

Job Description About the Role: The CNC Programmer and Set Up Technician is a skilled manufacturing role responsible for programming, setting up, and optimizing CNC machining processes for precision components in a regulated manufacturing environment. This position supports high quality production by developing efficient machining strategies, improving cycle times, and ensuring safe, repeatable, and capable processes. The role works closely with engineering, quality, and production teams and is ideal for an experienced Swiss screw machining professional seeking a hands-on, impact driven position. Responsibilities: * Develop, program, and set up CNC machines to support production and new manufacturing projects. * Create CNC programs for Swiss screw machines and optimize machining processes for efficiency and quality. * Select appropriate cutting tools, work holding methods, and machining strategies for new and existing jobs. * Develop and validate machining processes for new product introductions. * Update, modify, and improve existing CNC programs using modern cutting techniques and lean manufacturing principles. * Perform first piece inspections and deliver fully capable processes to the production team. * Troubleshoot CNC machine issues, tooling problems, and program related errors. * Train machine operators on new setups, programs, and machining processes. * Maintain quality, safety, and process control standards throughout manufacturing operations. * Collaborate with engineering, quality, and production teams to achieve operational goals. Qualifications: * High school diploma, GED, or trade school certification. * Minimum of five years of experience operating Swiss screw machines. * At least three years of CNC setup experience in a production environment. * Minimum of two years of CNC programming experience, including Swiss screw machines such as Tornos. * Strong understanding of CNC machining processes, tooling, and work holding techniques. * Ability to read and interpret technical drawings and specifications. * Experience passing first article or first piece inspections and supporting production handoff. Desired Qualifications: * Experience with CAD and CAM software such as SolidWorks or AutoCAD. * Formal in house or external machining and quality systems training. * Familiarity with lean manufacturing and continuous improvement practices. * Strong problem solving skills and ability to work in a fast paced, team oriented manufacturing environment.

Job DescriptionManufacturing Engineer Compensation for this role: 85-125k/ year based on experience The Manufacturing Engineer will lead the machining and assembly methodization of new aircraft hydraulic products supporting multiple business unit applications. This role provides technical support and direction to Operations for new business programs and legacy sustaining efforts, while coordinating closely with Design and Quality Engineering. The position also supports productivity, cost, quality, and efficiency objectives across manufacturing operations. Key Responsibilities • Develop, evaluate, and improve manufacturing methods using knowledge of product design, materials, fabrication processes, tooling, production equipment capabilities, assembly methods, and quality control standards., • Generate manufacturing and assembly documentation, and provide hands-on support to personnel during day-to-day manufacturing, inspection, and testing operations., • Design, develop, and implement manufacturing tools and fixtures to support production requirements., • Analyze engineering design releases and assess impacts to operations, including inventory, work-in-process, and outsourced work; develop and execute appropriate action plans., • Drive continuous improvement initiatives focused on cost reduction, quality improvement, and manufacturing efficiency., • Resolve method-related issues by collaborating with Design Engineering, Quality Engineering, Planning, Supervisors, and Operations staff., • Develop machining strategies and assist in the creation of CNC milling and turning programs., • Bachelor of Science in Mechanical, Industrial, Systems, Aerospace, or Manufacturing Engineering., • 3–5 years of experience in a manufacturing or machining-focused engineering role., • Proficiency with CAD software for the design and drafting of manufacturing tools and fixtures., • Experience with CAM software for generating CNC programs., • Working knowledge of lean manufacturing principles and production techniques., • Proficiency in Microsoft Office tools (Word, Excel, PowerPoint)., • ERP system experience preferred., • Must be authorized to work in the United States. This role operates in a manufacturing environment and may involve: • Exposure to high noise levels from operating machinery., • Exposure to fumes, dust, and mists associated with machining operations. Core Benefits Competitive Wages: Employees receive steady and reliable pay. Comprehensive Health Care Package: Includes medical coverage, though specific details (e.g., dental, vision) are not listed publicly. Paid Holidays & Vacations: Time off for holidays and vacation is part of the standard package1. Workplace Environment Safe & Diverse Workplace: Emphasis on safety and inclusion. Family-Oriented Culture: Employees report a supportive environment that values family and personal needs1. Professional Development Internal & External Training: Opportunities for skill development and career advancement. Promotion from Within: Encouragement of internal mobility and growth1. Workplace Type This is a fully onsite position in Westbury,NY. Application Deadline This position is anticipated to close on Apr 11, 2026. Diversity, Equity & Inclusion At Actalent, diversity and inclusion are a bridge towards the equity and success of our people. DE&I is embedded into our culture through: • Hiring diverse talent, • Maintaining an inclusive environment through persistent self-reflection, • Building a culture of care, engagement, and recognition with clear outcomes Our Bangalore, Hyderabad, Pune, and Chennai delivery centers are hubs of engineering expertise, with core capabilities in mechanical and electrical engineering, systems and software, and manufacturing engineering. Our teams deliver work across multiple industries including transportation, consumer and industrial products, and life sciences. We serve more than 4,500 clients, including many Fortune 500 brands. Learn more about how we can work together at actalentservices.com.

Job Description Schivo Medical in Plainview, New York, is a manufacture of a vast array of different products including robotic surgery instruments, neurosurgical tools, and cardiovascular closure devices that treat chronic disease in new ways so people can live better and longer. We are seeking to hire a strong innovative individual to join the engineering Team. As an employee of Schivo Medical, you will tackle a wide array of problems, including some of the world’s greatest medical challenges. You will be part of a company committed to helping you build a fulfilling and rewarding career. Manufacturing Engineer Position Summary: A Manufacturing Engineer is responsible for implementing and reviewing the procedures and equipment involved in the manufacturing process. Which includes researching automation techniques, testing new systems for efficiency and planning factory layouts to optimize production. Lead or assist in the cost estimating process. Manufacturing Engineer Essential Duties and Responsibilities: • Evaluate manufacturing processes based on quality criteria, such as efficiency and speed., • Provide cost estimations for new and existing projects., • Create, evaluate, and implement manufacturing processes., • Study production and machine requirements., • Develop and test effective automated and manual systems., • Design and install equipment., • Implement manufacturing processes that result in high-quality products., • Organize and manage manufacturing workflows and resources., • Optimize facility layouts, production lines, machine operations and network performance., • Resolve issues and delays in production., • Find ways to reduce costs and maximize quality., • Train staff in new and existing processes, • Collaborate with other engineers, contractors, and suppliers., • Ensure that manufacturing procedures follow safety and environmental regulations., • Upgrade systems and processes with recent technology., • Strong focus on new product implementation., • Proven experience with repeatable jobs. Manufacturing Engineer Necessary Education, Skills, and Competencies (including licensing and certifications): • Bachelor’s degree in mechanical engineering or related field, • 5 years of work experience as a manufacturing engineer or similar role, • Knowledge of manufacturing processes, fabrication methods and tool design, • Familiarity with manufacturing equipment and quality assurance techniques, • Commitment to health and safety standards and environmental regulations, • Well-versed in relevant software (e.g., CAD, MS Office), • Black belt certification a plus, • Continuous improvement, • Project management skills, • Problem-solving ability, • Teamwork skills Benefits: • 401(k), • 401(k)match, • Dental insurance, • Health insurance, • Vision insurance, • Generous Paid time off, • Paid holidays, • Employee referral program, • EAP Program, • Life insurance, • Pet inc, • Free coffee & tea daily Schivo Medical is an Equal Opportunity Employer. All qualified applicants will receive employment consideration without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, genetic information, disability, or protected veteran status.

Job Description About the Role: The Senior Manufacturing Engineer is a hands-on technical leader responsible for designing, implementing, and optimizing manufacturing processes for complex medical device or precision manufacturing environments. This role focuses on process development, automation, cost optimization, and continuous improvement while ensuring quality, safety, and regulatory compliance. The Senior Manufacturing Engineer plays a key role in scaling production, mentoring junior engineers, and driving operational excellence across manufacturing operations. Responsibilities: * Evaluate and optimize manufacturing processes based on efficiency, throughput, quality, and cost metrics. * Design, test, and implement new manufacturing processes for new product introductions and existing production lines. * Lead or support cost estimation activities for new and ongoing manufacturing programs. * Develop and validate automated and manual manufacturing systems. * Design, install, and qualify manufacturing equipment, tooling, and fixtures. * Analyze production requirements, machine capabilities, and capacity planning needs. * Optimize facility layouts, production lines, workflows, and machine utilization. * Identify and resolve production issues, bottlenecks, delays, and quality concerns. * Drive continuous improvement initiatives focused on cost reduction, yield improvement, and quality enhancement. * Train manufacturing staff on new and existing processes and standard work. * Mentor and develop junior manufacturing engineers and technical staff. * Collaborate with cross functional teams including engineering, quality, suppliers, and contractors. * Ensure all manufacturing processes comply with safety, environmental, and regulatory requirements. * Evaluate and implement new technologies to upgrade manufacturing systems and processes. Qualifications: * Bachelors degree in Mechanical Engineering or a related engineering discipline. * Ten or more years of experience as a manufacturing engineer or in a similar role. * Strong knowledge of manufacturing processes, fabrication methods, tooling, and CNC machining. * Experience with manufacturing equipment, automation, and quality assurance techniques. * Proficiency with CAD software and standard engineering tools, including MS Office. * Demonstrated project management, problem solving, and analytical skills. * Strong understanding of health, safety, and environmental regulations in a manufacturing environment. * Ability to work cross functionally and lead technical initiatives independently. Desired Qualifications: * Green Belt certification or formal training in Lean Manufacturing or Six Sigma methodologies. * Hands on experience with continuous improvement programs and operational excellence initiatives. * Experience supporting regulated manufacturing environments such as medical devices or precision equipment. * Strong leadership skills with a proven ability to mentor and develop engineering talent.

Job DescriptionDescription: JOB TITLE: Machinist/Programmer Job Summary: We are seeking a skilled Machinist/Programmer to join our team. The ideal candidate will have experience operating and programming CNC machines to produce precision parts. You will be responsible for reading blueprints, setting up machines, programming CNC controls and inspecting parts to ensure they meet specifications. Perform the activities of an expert level CNC programmer and shop leader to machine, program, estimate, and coordinate various products per established facility processes, including set-up, fabrication, and inspection using the operations of CNC mills, lathes, and other equipment. Perform as a key contributor for the new knowledge of programs and projects. Apply knowledge of policies, procedures, and the practical application of general and specific technical aspects of the job to complete varied and complex work. Make recommendations for new procedures. Work independently in established procedures and practices. Lead tasks and mentor others. Due to the nature of work performed within this facility, U.S. citizenship is required. Key Responsibilities: · Program set up, and operate CNC machines (lathes, mills, or grinders) to produce parts according to specifications. · Interpret blueprints, engineering drawings, and CAD models to develop and modify CNC programs. · Select and install appropriate tools, fixtures, and materials for each job. · Perform machine maintenance and troubleshooting to ensure optimal performance. · Inspect finished parts using precision measuring instruments to verify conformance to specifications. · Collaborate with engineering and production teams to optimize machining processes and improve efficiency. · Maintain a clean and safe work environment, adhering to company safety policies and procedures. · Continuously monitor machine operations to detect malfunctions or deviations from specifications. Required Qualifications: · High school diploma or equivalent; technical degree or certification in machining, CNC programming, or a related field is preferred. · Proven experience as a Machinist/Programmer, with a strong background in CNC programming and machine operation. · Proficiency in reading and interpreting blueprints, technical drawings, and CAD models. · Experience with various CNC controls (e.g., Fanuc, Haas, Siemens). · Strong knowledge of machining principles, materials, and cutting tools. · Excellent problem-solving skills and attention to detail. · Ability to work independently and as part of a team in a fast-paced environment. · Good communication skills and a commitment to quality and safety. · Ability to lift and carry up to 30lbs. · Comfortable working in a manufacturing environment with exposure to noise, dust and other industrial elements. · 10 years of experience with programming in computer-aided manufacturing (CAM) software and machining and fabrication principles · 10 years of experience with CNC and manual machinery operations · 5 years of experience with using Mastercam and programing and executing 4th and 5th axis machining operations · 3+ years of experience with estimating CNC machining work and jobs · Ability to review engineering drawings for completeness and interpret geometric dimensioning and tolerancing (GD&T) · Ability to inspect and verify all products by using standard inspection equipment and techniques/CMM (Coordinate Measuring Machine) · Ability to set up and operate manual machine shop equipment, including lathes, milling machines, saws, and power tools · Ability to pay strict attention to detail in a manufacturing environment Why Join U.S Dynamics Corporation? At U.S Dynamics Corporation, you will be a part of a supportive and innovative environment that fosters growth and values your professional development. We offer competitive compensation, comprehensive benefits, and opportunities for advancement. Join us in shaping the future with your talent and expertise. Requirements:

Job DescriptionBenefits: • 401(k), • Bonus based on performance, • Dental insurance, • Health insurance, • Paid time off Location: Long Island, New York Company: Harlequin Design New York Inc. About Us: Harlequin Design New York Inc. is a leading design and fabrication agency specializing in innovative solutions across various industries. We pride ourselves on our commitment to quality, creativity, and collaboration, creating exceptional designs that exceed client expectations. Job Description: We are seeking a talented SolidWorks Engineer to join our dynamic team. The ideal candidate will have a strong background in 3D modeling and engineering design, with a passion for creating precise and functional products. You will work closely with our design and fabrication teams to bring concepts to life and ensure the highest standards of quality and performance. Key Responsibilities: • Develop and modify 3D models and technical drawings using SolidWorks., • Collaborate with engineers and designers to translate concepts into detailed designs., • Conduct feasibility studies and simulations to optimize designs., • Prepare and maintain documentation related to design specifications and revisions., • Assist in prototyping and testing to validate designs and improve performance., • Provide technical support during the fabrication process and address any design-related issues., • Stay updated on industry trends and advancements in CAD technologies.Qualifications:, • Bachelors degree in Mechanical Engineering, Industrial Design, or a related field., • Proficiency in SolidWorks; additional CAD software knowledge is a plus., • Strong understanding of engineering principles, materials, and manufacturing processes., • Excellent problem-solving skills and attention to detail., • Ability to work collaboratively in a team-oriented environment., • Effective communication skills, both written and verbal.What We Offer:, • Competitive salary and benefits package., • Opportunities for professional development and career growth., • A creative and collaborative work environment., • The chance to work on diverse projects that make an impact.

Job Description About the Role: The CNC Machine Operator plays a critical role in the manufacturing process by setting up, operating, and maintaining computer numerical control (CNC) machines to produce precision parts and components. This position requires a strong attention to detail to ensure that all products meet exact specifications and quality standards. The operator will interpret technical drawings and blueprints to program machines accurately and make necessary adjustments during production runs. Additionally, the role involves routine inspection of finished products and troubleshooting any mechanical issues to minimize downtime. Ultimately, the CNC Machine Operator contributes to efficient production workflows and supports the overall success of the manufacturing team. Shift hours 6:00am-2:30pm (for 6 months Wednesday to Sunday) * Minimum Qualifications: • High school diploma or equivalent., • Proven experience operating CNC machines in a manufacturing environment., • Basic understanding of CNC programming and machine setup., • Ability to read and interpret technical drawings and blueprints., • Certification in CNC operation or machining technology., • Experience with CAD/CAM software for programming CNC machines., • Knowledge of safety protocols and best practices in a manufacturing setting., • Strong mechanical aptitude and troubleshooting skills., • Set up CNC machines by loading tools, materials, and inputting programming instructions based on engineering drawings., • Operate CNC machinery to manufacture parts according to precise specifications and quality standards., • Monitor machine performance and make real-time adjustments to maintain product accuracy and efficiency., • Perform routine maintenance and cleaning of CNC equipment to ensure optimal operation and longevity., • Inspect finished products using measuring instruments to verify conformance to specifications and document results., • Collaborate with engineers and quality control teams to resolve production issues and improve processes. The CNC Machine Operator uses technical skills daily to interpret engineering drawings and translate them into precise machine instructions, ensuring parts are produced to exact specifications. Attention to detail is critical when monitoring machine operations and inspecting finished products to maintain high quality standards. Mechanical skills are applied when setting up machines, performing routine maintenance, and troubleshooting issues to minimize downtime. Communication skills facilitate effective collaboration with engineers, quality control personnel, and team members to optimize production processes. Additionally, familiarity with CNC programming and software enhances the operator's ability to adjust and improve machine performance efficiently. Benefits: • 401(k), • 401(k)match, • Medical insurance, • Paid time off, • Employee referral, • Voluntary Benefits, • STD/LTD Disability, • Life Insurance, • Pet Insurance, • Discount on vendor products Schivo Medical is a Equal Opportunity Employer. All qualified applicants will receive employment consideration without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, genetic information, disability, or protected veteran status.

Job Description Test Engineer/Hardware Requirements - Garden City, New York About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. EDUCATION AND/OR EXPERIENCE • Bachelor’s degree or higher in Mechanical or Aerospace Engineering or a related field, • 2+ years of experience in a similar or related role SUMMARY OF POSITION The Test Engineer is responsible for developing and executing tests to ensure that product quality and reliability meet customer requirements. This role involves collaborating with cross-functional teams to identify testing needs, create test procedures, and analyze results. The Test Engineer will also engage in troubleshooting and problem-solving to ensure product performance. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Prepare and review acceptance and qualification test procedures and corresponding reports for complex aerospace hardware, • Oversee and execute hardware testing, • Analyze test results and ensure compliance with customer requirements, • Install and troubleshoot testing equipment, • Travel as needed to test labs to support testing, • Improve data acquisition system software and hardware, • Assist in the maintenance of test lab equipment, • Maintain database of instrumentation used in the test department, • Research new instrumentation and testing methodologies, • Review calibration of test instruments to verify compliance with quality assurance and customer requirements, • Support disposition of technical issues which occur during manufacturing, • Support customer reviews and inbound requests QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Strong understanding of testing methodologies and best practices, • Expertise in instrumentation and data acquisition, • Knowledge of analog and digital test equipment, • Knowledge of data acquisition software such as LabVIEW, • Knowledge of data processing techniques, Excel preferred, • Knowledge of relevant MIL-STD’s, • Familiarity with 3D modeling and CAD software, • Familiarity with heat and mass transfer, fluid mechanics, thermodynamics, and structural mechanics, • Highly motivated self-starter, • Strong problem-solving skills, • Excellent attention to detail, • Strong verbal and written communication skills, • Capable of thriving in a fast-paced environment PHYSICAL DEMANDS • Ability to work for prolonged periods on a computer or in a lab environment, • Ability to move equipment up to 25 pounds OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $80,000 to $120,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job DescriptionDescription: Aerospace Tool Designer Join our innovative aerospace engineering team as an Aerospace Tool Designer, where you will play a vital role in designing and developing essential tools that support the manufacturing and assembly of aircraft structural components. This position offers an exciting opportunity to contribute to the creation of high-precision tooling solutions that ensure quality and efficiency in aerospace production. Key Responsibilities: • Design, develop, and refine tools, jigs, fixtures, molds, and gauges used in aircraft manufacturing processes., • Support the entire tooling lifecycle, from initial concept and design reviews to procurement, production implementation, and documentation., • Collaborate with cross-functional teams to ensure tooling designs meet engineering specifications, safety standards, and production requirements., • Conduct design reviews and modify tooling based on feedback and testing results., • Maintain accurate documentation and configuration control for all tooling designs and revisions., • Assist in troubleshooting tooling issues during production and implement improvements as needed. Skills and Qualifications: • Strong understanding of manufacturing processes, materials, and aerospace standards in English., • Excellent problem-solving skills and attention to detail., • Ability to work collaboratively in a team environment and communicate effectively., • Knowledge of quality control and documentation procedures related to tooling. We foster a collaborative and innovative work environment that values continuous improvement and professional growth. Our company offers competitive benefits and opportunities to advance your career in the dynamic aerospace industry. Requirements: Key Responsibilities Tool Design & Modeling • Develop detailed 3D models and 2D drawings for a wide range of aerospace tooling, including assembly jigs, fixtures, molds, and gauges., • Design tooling solutions that support complex manufacturing and assembly challenges from concept through production., • Utilize CAD software such as Siemens NX, CATIA V5, and/or SolidWorks to create, modify, and maintain tooling designs., • Apply Geometric Dimensioning and Tolerancing (GD&T) principles to ensure accuracy, repeatability, and manufacturability., • Apply basic structural analysis principles and conduct research to validate tooling concepts and designs., • Ensure tooling meets quality, safety, ergonomic, and regulatory requirements., • Incorporate Design for Manufacturability (DFM) principles to ensure tools can be produced efficiently and cost-effectively., • Manage the complete tooling design lifecycle, from concept development through release to production., • Participate in and lead design reviews; provide constructive feedback to peers and stakeholders., • Develop tooling usage instructions, maintenance plans, and evaluation criteria, including calibration and load-testing requirements., • Support methodization and standardization of tooling and processes to improve product quality and reduce manufacturing cycle times., • Collaboration & Communication, • Work closely with cross-functional teams including Engineering, Manufacturing, Operations, and Quality., • Communicate effectively with internal stakeholders and external vendors to ensure tooling requirements, schedules, and deliverables are met., • Bachelor’s degree in Aerospace Engineering, Mechanical Engineering, Aeronautical Engineering, or a related field, with a minimum of four (4) years of aircraft tooling design experience., • In lieu of a degree, a minimum of eight (8) years of directly related aircraft tooling design experience., • This position requires the use of approved safety footwear (ASTM F-2413 complaint) when accessing or working in production and workshop areas. This position involves exposure to projects and contracts subject to the International Traffic in Arms Regulations (ITAR). As a result, only U.S. Citizens or Permanent Residents (Green Card holders) are eligible for employment in this role. Applicants must meet these requirements to be considered.

Job DescriptionBenefits: • 401(k) matching, • Competitive salary, • Free uniforms, • Health insurance, • Develop detailed technical drawings and specifications for retail window displays and pop ups., • Ensure that all project builds are designed with Health and Safety at the forefront of your mind., • Providing Build Drawings and CNC files., • Liaising with Project Managers on project requirements and deadlines.- Work closely with the Production Team to ensure that designs can be efficiently and accurately produced. • Conduct regular quality checks on prototypes and final products to verify accuracy and adherence to design specifications., • Participate in meetings with clients to present technical drawings and discuss project requirements. • Work closely with the design team whilst designing a project for a client. Ensuring that what is designed is achievable in project guidelines, budgets and timelines - whilst also thinking about whats best for the client., • Identify opportunities to streamline processes, improve efficiency, and enhance the overall quality of drafting work., • Proactively seek feedback and implement best practices to support ongoing learning and professional development.Qualifications: • 5+ years of experience in technical drafting for retail window displays and pop ups., • Must use SolidWorks or Inventor, • Proficiency in CAD software such as SolidWorks or Rhino., • Strong understanding of manufacturing processes and materials. • Excellent management skills with the ability to prioritize tasks and meet deadlines., • Detail-oriented mindset with a focus on quality assurance and continuous improvement.- Strong communication and interpersonal skills to collaborate effectively with cross-functional teams. • Ability to problem solve and troubleshoot technical issues as they arise., • Knowledge of health and safety regulations in the retail industry. If you have a passion for creative design and a strong technical background, we invite you to apply for this exciting opportunity to lead a dynamic team in designing innovative retail displays.

Job Description We are seeking an ambitious, motivated Construction Cost Estimator/Salesman with experience in construction sales for a role at a growing exterior renovation company. Responsibilities: • Project and control construction costs of labor and material for external construction projects of existing structures, and based off of architectural plans., • Prepare projects and estimates per bid procedure requirements., • Analysis of construction drawings and specifications using CAD programs and estimating software, such as On-Screen Takeoff, Edge Estimating, and Nearmaps., • Obtain and identify qualified bids and documents from vendors and General Contractors, • Evaluate changes, additions, and revisions timely and efficiently, in coordination with owner, contractors, engineers and architects as necessary., • Sales & Negotiating skills, • Estimating / Material Take-Offs, • Architectural Drawing Analysis - read and develop cost estimates, • Time Management / Scheduling Skills, • Computer Skills - Proficiency with Microsoft Excel, Microsoft Office, Auto CAD programs, • Excellent understanding of Commercial Construction process, • Experience in construction and/or engineering a plus., • Excellent interpersonal communication skills - written and verbal, • Spanish speaking a plusCompany DescriptionFull service external renovation company.Full service external renovation company.

Job Description Job description About 21st Century Dental Lab 21st Century Dental Lab was founded on the belief that clinicians need to advance along with the dental industry. Our team is dedicated to the integration of digital dentistry into our workflow and the workflows of our clinicians. Every restoration we fabricate utilizes digital advancements to ensure high precision, fit, function, and esthetics. About the role We are looking for a dental technician. The dental technician will work alongside our team of support and technical experts to provide the best lab experience to our clients. What you’ll do • Communicate with doctors on treatment planning and workflow, • Quality control of restorative and prosthesis products, • 2-5 years of experience working in a dental lab with all around experience, • Paid time off, • 5 Paid holidays Job Type: Full-time Pay: 60k-80k salary Expected hours: 40 per week Benefits: • Paid time off Schedule: • Day shift Supplemental Pay: • Bonus opportunities Experience: • Dental technician: 3 years (Required) Ability to Relocate: • New Hyde Park, NY: Relocate before starting work (Required) Work Location: In person Company Description21st Century Dental Lab was founded on the belief that clinicians need to advance along with the dental industry. Our team is dedicated to the integration of digital dentistry into our workflow and the workflows of our clinicians. Every restoration we fabricate utilizes digital advancements to ensure high precision, fit, function, and esthetics.21st Century Dental Lab was founded on the belief that clinicians need to advance along with the dental industry. Our team is dedicated to the integration of digital dentistry into our workflow and the workflows of our clinicians. Every restoration we fabricate utilizes digital advancements to ensure high precision, fit, function, and esthetics.

Job Description HVAC Drafter Location: Farmingdale, NY Employment Type: Full-time, Permanent Salary: Up to $90,000 3D drafting experience required A well-established HVAC firm located in Farmingdale, NY is seeking an experienced HVAC Drafter to join their team. This role involves creating detailed technical drawings and plans for heating, ventilation, and air conditioning (HVAC) systems. The drafter will work closely with engineers, project managers, and other design professionals to transform specifications and concepts into precise CAD drawings for construction and installation. Responsibilities: • Create accurate HVAC layouts, including ductwork, piping, and equipment plans, using AutoCAD, Revit, or similar software, • Interpret architectural and engineering drawings, specifications, and relevant building codes, • Develop simple 3D models of HVAC duct and piping systems using AutoCAD MEP and Revit, • Update 2D drawings to 3D formats for enhanced visualization and coordination, • Provide 3D layout support to identify spatial conflicts and improve design accuracy, • Coordinate with engineers and project managers to meet design intent and project goals, • Revise drawings based on markups, field changes, and updated requirements, • Assist with load calculations, equipment selection, and basic HVAC design tasks, • Maintain compliance with drawing standards and applicable codes, • Associate degree or technical certification in drafting, mechanical design, or a related field, • Proficiency in AutoCAD, Revit, and other HVAC-related design software, • Solid understanding of HVAC systems and terminology, • Knowledge of building codes, ASHRAE standards, and construction documentation, • Strong attention to detail and organizational skills, • 3+ years in HVAC drafting or mechanical drafting roles, • Experience with commercial, residential, or industrial HVAC projects, • Familiarity with BIM (Building Information Modeling) workflows Company DescriptionThe Bachrach Group (TBG) is a New York-based staffing and recruiting agency founded in 1974 by Richard Bachrach. The agency specializes in facilitating placements for professionals across various industries on a nationwide scale. TBG's overarching mission is to deliver tailored staffing solutions to its client base while simultaneously providing job seekers with career prospects. The company relies on its team of recruiters, who leverage their industry knowledge and networks to connect employers with top talent. TBG provides a comprehensive range of staffing services, including direct hire, temporary staffing, Recruitment Process Outsourcing (RPO), and contract staffing. The agency has consistently achieved notable rankings in Crain's lists, ranking as the largest search firm in NYC since 2020.The Bachrach Group (TBG) is a New York-based staffing and recruiting agency founded in 1974 by Richard Bachrach. The agency specializes in facilitating placements for professionals across various industries on a nationwide scale. TBG's overarching mission is to deliver tailored staffing solutions to its client base while simultaneously providing job seekers with career prospects. The company relies on its team of recruiters, who leverage their industry knowledge and networks to connect employers with top talent. TBG provides a comprehensive range of staffing services, including direct hire, temporary staffing, Recruitment Process Outsourcing (RPO), and contract staffing. The agency has consistently achieved notable rankings in Crain's lists, ranking as the largest search firm in NYC since 2020.

Job Description Quality Engineer II - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding good quality people, which is why we will provide a screening to see if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The Quality Engineer II position will work closely to solve quality problems and support new development programs, legacy programs, and conduct internal audits. SUPERVISORY RESPONSIBILITIES • This job has no supervisory responsibilities. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Working closely with Engineering to ensure that designs meet applicable quality requirements., • Plan and perform internal quality audits and execute action items., • Lead quality initiatives to reduce scrap and rework by developing and facilitating cross-functional teams., • Conducting quality investigations., • Be an active participant in the material review board., • Provide quality function support by working closely with Sales, Engineering, and Manufacturing to manage customer relations, expectations, needs and satisfaction., • Independently drive and direct actions with departmental groups to maintain MRB and RMA issues., • Drive key quality performance metrics: DPPM, OTD, Cost of Quality, Customer Scorecards, Internal Audit Risk and Effectiveness, Supplier Performance, Contract Review., • Source inspection liaison, • Travel to customer and supplier locations as required. SECONDARY DUTIES AND RESPONSIBILITIES • Supporting new product introduction programs by creating and maintaining the following, as required:, • Production Part Approval Process, • Advanced Product Quality Planning, • Zero Defects Program, • Control Plans, • Inspection Plans, • Inspection Reports, • First Article Inspection Reports, • Supplier Approval and Development, • Attend NPI meetings, including, • Preliminary Design Reviews, • Critical Design Reviews, • Make Buy Reviews, • Monitor the Progress of NPI programs through manufacturing and into production, • Conduct purchase order reviews related to NPI and production programs, • Interact with customers on NPI and production programs, • Engage in problem-solving with engineering, operations, and supply chain on NPI and production programs, • Support shipments of NPI and production programs, • Conduct internal audits, • Become a designated quality representative when required by the customer QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Knowledge of aerospace quality requirements and specifications., • Proven track record of partnering with manufacturing and engineering, • Experience with root cause analysis and corrective action. Experience with formal quality and operations systems., • Capable of reviewing and interpreting drawings, contracts / POs, and applicable processing standards., • Skilled at performing First Article inspections., • Proficiency with MS Office applications: Word, Excel, PowerPoint, and Outlook., • An understanding of the use and application of statistics and SPC., • Six Sigma preferred EDUCATION AND/OR EXPERIENCE • Bachelor’s Degree in Engineering required, • 9 to 10 plus years working in the aerospace and or automotive industry in a quality, engineering, or manufacturing capacity., • Previous experience in a high-mix, low-volume job shop, • Ability to manage priorities and meet deadlines in a fast-paced environment, • Working knowledge of ISO 9001:2015 and AS9100D Quality Management System processes., • Due to ITAR restrictions, an export license may be required OTHER SKILLS • Computer Literacy in Excel, Minitab, CAD, and Visio, • Advanced problem-solving and advanced data analysis techniques, • Knowledge in and experience in 8D problem-solving techniques, SPC, and statistical analysis PHYSICAL DEMANDS • Continuous periods of sitting at a desk and working on a computer and phone., • Prolonged time standing., • Must be able to occasionally lift 25 pounds at a time., • Frequently required to stand, walk, and reach with arms and hands. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $100,000 to $120,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job DescriptionBenefits: • 401(k), • Dental insurance, • Health insurance, • Paid time off

Job Description About Us: We are a leading surveying and geospatial solutions provider dedicated to delivering accurate and reliable data to support various industries such as construction, land development, and infrastructure projects. We are committed to excellence in surveying services and are seeking a highly skilled and licensed Professional Land Surveyor to join our team. Position Overview: As a Professional Land Surveyor working with our team in Hicksville, NY, you will play a key role in leading surveying projects, overseeing survey teams, and ensuring the accuracy and compliance of survey data. The ideal candidate will have a strong background in land surveying, a current Professional Land Surveyor license, and the ability to provide expert guidance to support the success of our projects. Key Responsibilities: • Lead and manage land surveying projects, from initiation to completion, ensuring compliance with industry standards and regulations., • Oversee successful boundary surveys, topographic surveys, and construction staking in accordance with project requirements., • Review and interpret legal documents, including deeds, plats, and easements., • Provide expert guidance on complex surveying issues and offer solutions to ensure accurate and reliable data collection., • Supervise and mentor surveying team members, including Survey Party Chiefs, CAD Technicians, and Survey Technicians., • Oversee the preparation of survey deliverables, including plats, maps, and drawings., • Collaborate with clients, engineers, and other stakeholders to understand project goals and expectations., • Ensure the quality control of survey data, including the review of field notes, sketches, and calculations., • Stay informed about industry advancements, regulations, and emerging technologies in land surveying., • Bachelor's degree in surveying, civil engineering, or a related field., • Professional Land Surveyor (PLS) license in NY, • Minimum of 10 years of experience in the Civil Engineering and Land Surveying Industry., • Strong understanding of land surveying principles, methodologies, and best practices., • Proficiency in the use of surveying equipment, including total stations and GPS., • Excellent leadership and communication skills., • Familiarity with relevant state and local regulations and surveying standards.

Translate designs between AutoCAD (civil/architectural) and SolidWorks (manufacturing/engineering). Ability to think beyond CAD into process, handling, and cost constraints. Break down a large, monolithic CAD model into modular components suitable for factory fabrication.

Working at the Naval Nuclear Laboratory we foster pride in belonging to an organization whose culture is made up of these core values: Trust, Empowerment, and Collaboration.Our company promotes a positive culture while ensuring the safety and reliability of our nation's naval nuclear reactors, and t

Enterprise Mobility is seeking a responsible, dedicated person to join our team as a full time Automotive Detailer.The starting rate of pay is $18.Employees can earn yearly merit increases based on performance.This position is located at 775 Old Country Rd Westbury, NY 11590.We offer a robust Benefi

Working at the Naval Nuclear Laboratory we foster pride in belonging to an organization whose culture is made up of these core values: Trust, Empowerment, and Collaboration.Our company promotes a positive culture while ensuring the safety and reliability of our nation's naval nuclear reactors, and t

Enterprise Mobility is seeking a responsible, dedicated person to join our team as a seasonal Automotive Detailer.The starting rate of pay is $18.This position will report to 2900 Merrick Rd Bellmore, NY 11710 and consists of working in the surrounding local branches: Bellmore, Farmingdale, Massapeq

Working at the Naval Nuclear Laboratory we foster pride in belonging to an organization whose culture is made up of these core values: Trust, Empowerment, and Collaboration.Our company promotes a positive culture while ensuring the safety and reliability of our nation's naval nuclear reactors, and t

Misa Plumbing, a Power-Flo Technologies company, is seeking an experienced Plumbing Project Manager to lead the team.Misa Plumbing is a service and repair company licensed in NYC.Plumbing Project Manager Responsibilities.Manages project execution to ensure adherence to budget, schedule, and scope.Ma

Working at the Naval Nuclear Laboratory we foster pride in belonging to an organization whose culture is made up of these core values: Trust, Empowerment, and Collaboration.Our company promotes a positive culture while ensuring the safety and reliability of our nation's naval nuclear reactors, and t

Enterprise Mobility is seeking a responsible, dedicated person to join our team as a seasonal Automotive Detailer.The starting rate of pay is $18.This position is located at 549 S.The start date for the season is on or after May 18th, 2026 and ends on or before November 18th, 2026 and cannot exceed

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do.Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth.L3Harris provides an inclusive, engaging environment designed to empower empl

Enterprise Mobility is seeking a responsible, dedicated person to join our team as a full time Automotive Detailer.The starting rate of pay is $18.Employees can earn yearly merit increases based on performance.This position is located at 397A Jericho Tpke Mineola, NY 11501.We offer a robust Benefits

Landscape And/Or Irrigation Installer.We are looking for experienced landscape and/or irrigation installers who are looking for a change to join our landscape lighting team.The work is outdoors so you can still enjoy working outside and utilizing your skills while taking on a lighter task of install

Enterprise Mobility is seeking a responsible, dedicated person to join our team as a seasonal Automotive Detailer.The starting rate of pay is $18.This position is located at 131 Northern Blvd Great Neck, NY 11021.The start date for the season is on or after May 18th, 2026 and ends on or before Novem

Automotive Detailer Seasonal Position.Enterprise Mobility is seeking a responsible, dedicated person to join our team as a seasonal Automotive Detailer.The starting rate of pay is $18.This position is located at 131 Northern Blvd Great Neck, NY 11021.The start date for the season is on or after May

Enterprise Mobility is seeking a responsible, dedicated person to join our team as a seasonal Automotive Detailer.The starting rate of pay is $18.This position will report to 2900 Merrick Rd Bellmore, NY 11710 and consists of working in the surrounding local branches: Bellmore, Farmingdale, Massapeq