Cad jobs in Glendale, ArizonaCreate job alerts

Trusted is seeking an experienced nurse for this exciting travel nursing assignment. Trusted has streamlined the travel nursing experience by enabling nurses to apply directly to jobs without the need for recruiters. This unique approach provides more transparency, eliminates pesky calls from recruiters, and puts more money in your pocket. Join the thousands of nurses across the country who have already made the switch to a more modern way to work. Experience: • 12 months of role experience is required with some in the last 12 months., • Must have at least 12 months of Intensive Care Unit experience within the past 3 years., • 3 months of experience with Cerner is preferred from any number of months. Requirements: • Candidates must have a Arizona license or compact license (required for submission)., • This role will require floating to multiple units, • Local & travel allowed., • COVID vaccination required after submission. Religious and medical declinations accepted., • COVID booster required after submission. Religious, medical, and personal declinations accepted., • Flu vaccination required after submission. Religious and medical declinations accepted. Pre-employment modules may be required for this role. Please upload any certifications or health documents you have to your profile to expedite your on-boarding process. Additional Details: Nurse Only: PCU roles require both a PCU & ICU skills checklist with application. Procedures/Diagnostics/Treatments Performed on Unit: ICU - Sespis, respiratory distress (pne, CHF, HF), CAD, ARF CVICU - Post cath, CAD, HF, immediate post heart recovery. Special Procedures: Intubations, broncoscopy, sedation, EGD, colonoscopy, paracentesis, thoracentesis, chest tubes, bedside LPs, bedside trachs Types of Patients on Unit: Adult, Geriatric Equipment Used on Unit: Philips monitors and spectrum pumps, Auxiliary Unit/Facility Details: 24 Beds Floating Requirements: Yes, with in skillset down to Med Surg if needed Float experience does not count towards the unit experience requirement. 5 days maximum time off. Facility holidays: 10/31/2025, 11/27/2025, 12/24/2025, 12/25/2025, 12/31/2025. Number of holidays allowed off: 1 2 references from last 12 months (Any reference type) - required after submission Certifications: • BLS (Basic Life Support), • ACLS (Advanced Cardiovascular Life Support), • NIHSS (NIH Stroke Scale) • Skills Checklist: Yes, • References: Yes, • License Type: registered, • License State: AZ, • Job Type: Travel, • Nurse/Patient: 1/2, • Shift Type: Night, • Contract Date: Start ASAP, • Expected Length: 13 weeks, • Hours per Shift: 12, • Shifts per Week: 3

Job Description United Integrated Services (USA) Corp. was founded in Phoenix, Arizona in 2020. UIS is a U.S. subsidiary of United Integrated Services Co., Ltd. (UIS Taiwan) which was founded in Taiwan in 1982. UIS is a multidisciplinary engineering and construction company. We provide fully integrated design-build services to our clients in the high-technology industry for their manufacturing facility needs. Our scope of services includes engineering design, high-tech factory planning, and on-time equipment and material delivery in which clean-room systems, HVAC, electrical systems, and tool hook-up, are all vital parts in need of total coordination. Summary: We are searching for a Cleanroom Engineer to join our team. The successful candidate will be responsible for designing, implementing, and maintaining Cleanroom systems in a cleanroom environment, ensuring compliance with semiconductor production regulations and standards. Experience in Cleanroom construction is highly desired. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Perform requirements classification of clients, communicating project requirements and design review with internal & external design team for Cleanroom system., • Perform the required scope of work and clarify specification with stakeholders., • Assist procurement team on Cleanroom systems equipment & materials' and assist in contractors' awards., • Understand isometrics, P&ID and CAD drawings specifically for Cleanroom systems., • Review, approve and oversee the installation of Cleanroom systems., • Inspect work in progress to ensure that workmanship conforms with specifications and assure adherence to construction schedules., • Review progress reports, materials used and costs, contract payment application, and adjust work schedules as indicated by the reports., • Review & reply RFI (Request for information) and change orders., • Provide daily, weekly, and monthly reports for internal use and client communication., • Identify and solve problems., • Scheduling and schedule execution., • Understand drawing and review specifications and estimation., • Other responsibilities as assigned. Qualifications: The requirements listed below are representative of the knowledge, skill, and/or ability required. Education/Experience: • Bachelor's degree in Cleanroom Engineering, Construction Management, or a related field., • 0-5+ years of experience Cleanroom system planning., • Construction experience preferred. Semiconductor construction, a plus. Skills and Competencies: • Strong understanding of Cleanroom construction processes., • Proficiency in Microsoft Office Suite products (Word, PowerPoint, Excel, Outlook, Teams)., • Ability to use engineering software, such as AutoCAD, Primavera, or others., • Excellent organizational and time management skills., • High level of attention to detail, and highly organized., • Ability to act with integrity, professionalism, and confidentiality., • Ability to effectively prioritize responsibilities depending on project needs. Ability to effectively present information and respond to questions from groups of managers, and employees., • Ability to develop and maintain successful relationships with all levels of employees, clients, and subcontractors., • Must be able to work under pressure and meet deadlines while maintaining a professional attitude., • Effective English verbal and written communication skills required., • Ability to communicate in Mandarin/Taiwanese is a plus., • Ability to effectively present information and respond to questions from groups of managers, customers, and employees., • Read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Write routine reports and correspondence. Nice to have: • Start-up experience., • Verbal communication skills in Mandarin., • Professional Engineer license. Additional Requirements: This position requires the ability to lift and carry up to 50 lbs for transporting documents, equipment, and other materials as needed. The role involves extended periods standing, walking and/or of sitting while working at a computer. Frequent movement between the construction trailer and various areas of the construction site is necessary. The position is based at the construction job site (trailer office). Even though the exposure of hazardous work conditions would be minimal, the employee may be required to visit the work area of the jobsite and thus be exposed to some typical work hazards that may be present on a construction site, such as dust, moving machineries, weather, caustic chemicals, noise etc. UIS would provide the required safety protection to ensure the safety of UIS employees and comply with all OSHA standards. Equal Employment Opportunity: UIS is an Equal Opportunity Employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, veteran status. Or any other characteristic protected by federal, state, or local law. We believe in fostering a diverse and inclusive workplace where all individuals are treated with respect and dignity. Disclaimer: The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties as assigned by their supervisor.

Job Description Are you an innovative Design Engineer ready to drive the next generation of mining products? Bradken, a global leader in mining sector, is seeking a talented professional to join our team. This is an unparalleled opportunity to provide design and engineering expertise in the development of new products and solutions that will shape the industry. You will be a key contributor to our global strategy, ensuring our products are of the highest standards of quality. Reporting to the Engineering Team Lead, you will be responsible for providing design, development, and engineering services across our diverse product portfolio, including GET, undercarriage, mill liners, and crushers. This role is perfect for a detail-oriented problem-solver who thrives on managing multiple projects and collaborating with various stakeholders to bring cutting-edge products to market. If you have a passion for design, a strong technical background, and a desire to make a tangible impact, Bradken offers the ideal environment for your career to flourish. About You You are a skilled Design Engineer with a Mechanical Engineering degree and a proven track record of success in a mining or heavy manufacturing environment. You are a natural problem-solver with a meticulous eye for detail, adept at using CAD, FEA, and DEM software to create innovative and robust product designs. Your experience in product development and project management allows you to effectively manage multiple projects from concept to completion. You are an excellent communicator, capable of providing technical expertise to a wide range of stakeholders, from internal teams to external customers. You are comfortable with both on-site field evaluations and complex data analysis, ensuring products are designed, developed, and customized to meet and exceed customer needs. The Role As a Design Engineer, you will play a key role in Bradken's product development lifecycle. Your responsibilities include: • Product Design & Customization: Provide expert design and engineering services for new products and customize existing ones to meet customer and market demands, ensuring compliance with global quality and manufacturing standards., • Engineering & Development: Perform solid modeling, detailed drafting, and analysis using software to support new product proposals from the Marketing and Product Management Group. You will also manage project lifecycles and ensure all documentation is properly captured in the Product Lifecycle Management (PLM) system ensuring to protect Bradken's intellectual property., • Cross-Functional Collaboration: Collaborate with sales, manufacturing, and supply chain teams to ensure products can be successfully designed, manufactured, and delivered to meet customer needs., • Experience: A Mechanical Engineering degree with 3+ years of experience as a design or reliability engineer in a mining or heavy manufacturing environment., • Technical Skills: Strong proficiency in CAD, FEA, and DEM software., • Product Development: Proven experience in product design, development, and project management, with a focus on creating and implementing new products and services for the mining industry., • Problem-Solving & Communication: Strong analytical skills for problem-solving at customer sites, combined with excellent communication abilities to work effectively with cross-functional teams and customers. Why join our team at Bradken? • Safety first environment and mindset, • Flexible work options, • Competitive Total Reward Packages, • Annual Performance Bonus, • Global and local recognition programs, • Paid Parental Leave, • Learning and Development focus, • Education assistance, • EAP for you and your family Before commencing employment, you will be required to complete psychometric assessment, Microsoft skills assessment and a pre-employment medical including drug and alcohol testing. WE RESPECTFULLY REQUEST NO RECRUITMENT AGENCY APPROACHES Bradken is an Equal Opportunity Employer and we are committed to providing a diverse, inclusive, engaging and flexible environment for our people because great things happen when individuals are given the opportunity to bring themselves into their work. All employment will be based on merit, competence, performance and business needs.

Job Description ABcom is a national low voltage commercial structured cabling contractor, and we are recruiting our next Estimator to join our growing team. Purpose of this position: The Project Engineer/ Estimator supports sales activities in commercial, data center, and other critical markets. Assists the sales team with site visits, design, sales engineering, takeoffs, bills of material, estimates, and proposal formation. Coordinates proposal activities, scheduling, and communications; procures equipment and places product orders; assists fellow engineers with technical knowledge, including Accubid estimating software; delivers high quality results that differentiate us from other competitors. Scope of the position: Reports to the VP of Operations. Responsibilities: • Knows and remains current on competition, market conditions, building codes, and industry standards, • Presents professional ABcom image with vendors, manufacturers, distribution, and customers., • Cultivates good customer relationships and communications to build repeat businesses and gain referrals., • Works with sales team and project management groups to engineer and provide accurate bills of materials and cost estimates for upcoming jobs—new construction and retrofit., • Develops and successfully presents proposals that withstand critical examination, brings value to customers, meets ABcom minimum standard gross profit requirements, and helps close the sales., • Provides company standard handoffs to Operations for closed sales work., • Coordinates with project managers to ensure on-time, high-quality delivery., • Coordinates with Operations on forecasted product, equipment, and manpower needs, • Helps resolve job-related issues, • Adheres to and enforces all policies from ABcom Employee Handbook, • BIM - CAD - Estimating ? Copper and Fiber, • Other duties as assigned by VP of Operations. Matrixed ABcom relationships: Project Engineer will work in conjunction with all other engineers. Converses with Account Executives and Project Managers to determine bid and project requirements. Maintains a professional relationship with all customers. Works closely with Sales Team to develop project proposals and develop new business. Additional Information: • ABcom Environment:, • Working conditions: Work in a variety of settings, including office and customer sites. Employee is required to travel and/or work some evenings and nights. Must have reliable auto transportation and must maintain an insurable driving record. • Fast-paced - Team Spirit - Family values, • Innovative - Open Communication - Approachable Leadership - Dynamic - Appropriate Work/Life Balance, • Physical and mental requirements: Perform physical labor such as lifting, bending, and pulling on occasion. Requirements Knowledge and Skills (Minimum requirements): • Education, credentials, licenses: Bachelor’s Degree in technology-related field or equivalent combination of education and experience. Valid driver’s license with vehicle in good repair. Industry recognized certifications, such as RCDD, are preferred., • Specialized knowledge: BICSI installation and safety standards, understanding of information transport systems technologies. Competency and proficiency in MS Office, AutoCAD, and Accubid software, or equivalent., • Experience: Two years’ experience in low-voltage structured cabling for end-users, developers, and general contractors., • Skills: • Team player - Resourceful - Flexible, • Accountable - High-energy -Dependable, • Problem-solving - Strong Work Ethic - Leader, • Can-do attitude - Clear and Effective Communication, • Organized and Detail Oriented Benefits Compensation: ABcom offers a competitive compensation package, including medical and dental insurance, 401(k) plan, and vacation package. Salary to be determined, based on experience and education.

Job Description United Integrated Services (USA) Corp. was founded in Phoenix, Arizona in 2020. UIS is a U.S. subsidiary of United Integrated Services Co., Ltd. (UIS Taiwan) which was founded in Taiwan in 1982. UIS is a multidisciplinary engineering and construction company. We provide fully integrated design-build services to our clients in the high-technology industry for their manufacturing facility needs. Our scope of services includes engineering design, high-tech factory planning, and on-time equipment and material delivery in which clean-room systems, HVAC, electrical systems, and tool hook-up, are all vital parts in need of total coordination. Summary: We are searching for a skilled and dedicated Mechanical Associate Engineer to join our team. The successful candidate will be responsible for designing, implementing, and maintaining air filtration systems in a cleanroom environment, ensuring compliance with semiconductor production regulations and standards. Experience in HVAC is highly desired. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Perform requirements classification of clients, communicating project requirements and design review with internal & external design team for Air Abatement System (AAS), such as, process exhaust duct, scrubber for waste air treatment, and dosing chemical., • Perform the required scope of work and clarify specification with stakeholders., • Assist procurement team on the procurement of AAS systems equipment & materials' and assist in contractors' awards., • Understand isometrics, P&ID and CAD drawings specifically for AAS systems., • Review, approve and oversee the installation of AAS systems., • Inspect work in progress to ensure that workmanship conforms with specifications and assure adherence to construction schedules., • Review progress reports, materials used and costs, contract payment application, and adjust work schedules as indicated by the reports., • Review & reply RFI (Request for information) and change orders., • Provide daily, weekly, and monthly reports for internal use and client communication., • Identify and solve problems., • Scheduling and schedule execution., • Understand drawing, and review specifications and estimation. The requirements listed below are representative of the knowledge, skill, and/or ability required. Education/Experience: • Bachelor's degree in Mechanical Engineering, Construction Management, or a related field., • Strong understanding of process exhaust duct sizing & layout, mechanism of scrubber for waste air treatment., • Proficiency in Microsoft Office Suite products (Word, PowerPoint, Excel, Outlook, Teams)., • Ability to use engineering software, such as AutoCAD, Primavera, or others., • Excellent organizational and time management skills., • High level of attention to detail, and highly organized., • Ability to act with integrity, professionalism, and confidentiality., • Ability to effectively prioritize responsibilities depending on project needs. Ability to effectively present information and respond to questions from groups of managers, and employees., • Ability to develop and maintain successful relationships with all levels of employees, clients, and subcontractors., • Must be able to work under pressure and meet deadlines while maintaining a professional attitude., • Effective English verbal and written communication skills required., • Ability to communicate in Mandarin/Taiwanese is a plus., • Ability to effectively present information and respond to questions from groups of managers, customers, and employees., • Start-up experience., • Verbal communication skills in Mandarin., • Must have and maintain a valid Arizona driver's license. May be required to travel to other sites within Arizona to perform certain work functions. Physical Demands & Work Environment This position requires the ability to lift and carry up to 50 lbs for transporting documents, equipment, and other materials as needed. The role involves extended periods standing, walking and/or of sitting while working at a computer. Frequent movement between the construction trailer and various areas of the construction site is necessary. The position is based at the construction job site (trailer office). Even though the exposure of hazardous work conditions would be minimal, the employee may be required to visit the work area of the jobsite and thus be exposed to some typical work hazards that may be present on a construction site, such as dust, moving machineries, weather, caustic chemicals, noise etc. UIS would provide the required safety protection to ensure the safety of UIS employees and comply with all OSHA standards. Equal Employment Opportunity: UIS is an Equal Opportunity Employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, veteran status. Or any other characteristic protected by federal, state, or local law. We believe in fostering a diverse and inclusive workplace where all individuals are treated with respect and dignity. Disclaimer: The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties as assigned by their supervisor.

Job Description Ideal Aerosmith is a leading supplier of precision inertial guidance test systems, flight motion simulators, and a premier provider of aerospace test engineering services, ATE system engineering, and quality contract manufacturing services to the aerospace industry. We're experts and we earn that title everyday with our customers through innovative engineering, manufacturing, and sustainment of world-class motion and electric test solutions and services. Here, we don’t just solve complex problems—we redefine what’s possible. With a team of skilled problem solvers and a culture that thrives on tackling challenges head-on, we are dedicated to our clients' success. Enjoy competitive benefits, a supportive work environment, and every other Friday off to recharge. The Mechanical Engineer III will provide advanced mechanical engineering support for the design and development of Ideal Aerosmith’s products and testing solutions. This role involves planning, conceptualizing, and executing complex mechanical designs while ensuring effective integration with electrical and software systems. It requires the ability to lead projects with minimal guidance, troubleshoot complex issues, work across engineering disciplines, meet deadlines with precision, and contribute to a collaborative team environment through technical expertise and mentorship. Job Responsibilities • Apply principles and practices of mechanical engineering to plan and design the mechanical system for the Ideal Aerosmith product., • Develop CAD models for the systems designed., • Generate and provide supporting calculations of the design., • Prepare technical drawings and specifications for components and the entire system., • Create and generate Bill of Materials for the system., • Develop and coordinate test procedures to ensure operation of equipment meets quality standards, regulations, and customer requirements., • Confer with engineers, product management, customers, and management to discuss existing or future engineering products and projects., • Provide mechanical expertise to assembly, integration team, and customer support as needed., • Provide estimates for labor, material, and other costs for quotes and timeline development., • Participate and lead within the guidelines of the Entrepreneurial Operation System, • Ensure compliance with ISO 9001 and other regulatory standards., • BS or equivalent in Mechanical Engineering., • 6-9 years of mechanical engineering design experience with superb technical knowledge of diverse mechanical engineering, manufacturing, fabrication, testing, and development processes., • Ability to travel (domestic and internationally) and obtain a passport., • Extensive experience in 3D CAD Modeling and Design, with knowledge in Solid Edge preferred., • Excellent working knowledge of mechanical systems and design practices., • Proven ability for hands on trouble shooting of mechanical systems., • Mathcad experience preferred., • Organizational skills and attention to detail required., • Excellent verbal/written communication skills., • Strong interpersonal skills., • Must have the ability to lift and/or carry 45 lbs., • Ability to work for extended periods at computer workstation/keyboard., • Ability to type accurately and efficiently.

Job Description Exclusive Bonus Opportunity! A limited time bonus program is currently available for this role. Speak with your recruiter today to determine eligibility before it's gone! Offer expires September 30th, 2025. Design the Future of Turbine Technology: Join PDS Tech Commercial as a Senior Advanced Mechanical Engineer! PDS Tech Commercial is seeking highly skilled Senior Advanced Mechanical Engineer to support advanced turbine component design and analysis. This is a hands-on opportunity to work on cutting-edge gas turbine technologies in a collaborative, high-performance environment. If you have deep expertise in fluid dynamics, heat transfer, and thermal modeling, we want to hear from you. About the Role In this role, you’ll apply your engineering expertise to design and analyze axial and radial turbine blades and vanes, with a focus on cooling and durability. You’ll use industry-leading tools to develop thermal models, perform CFD simulations, and communicate results to internal and external stakeholders. Key Responsibilities * Design and analyze axial and radial turbine blades and vanes, including internal cooling * Perform heat transfer and secondary cooling flow analyses * Create and calibrate 2D/3D transient thermal models using NX Thermal or equivalent tools * Execute 3D conjugate heat transfer models using StarCCM+ or equivalent software * Use CAD software to generate and manipulate turbine component geometries * Communicate technical results clearly to stakeholders Required Qualifications * Bachelor’s degree in Mechanical or Aerospace Engineering * Minimum 5+ years of experience in gas turbine engineering design and analysis * Proficiency in StarCCM+ or other commercial thermal analysis tools * Experience with CAD modeling tools such as NX or equivalent * Strong written and oral communication skills Preferred Qualifications * MS or PhD in Mechanical or Aerospace Engineering * Experience with turbine component design and analysis * Expertise in fluid mechanics, fluid dynamics, or heat transfer disciplines * Familiarity with thermal and CFD tools such as NX-Thermal, STAR-CCM+, or similar Why Join Us At PDS Tech Commercial, you’ll be part of a team driving innovation in aerospace engineering. This role offers: * Pay Rate: 52.88–60/hour, depending on experience * Schedule: Day Shift Ready to Apply? You’ll work on high-impact projects with experienced professionals, using advanced tools and methodologies to shape the future of turbine technology. Apply now!! This position requires use of information or access to facilities subject to the International Traffic in Arms Regulations (ITAR) and/or Export Administration Regulations (EAR). These regulations may limit access of controlled technologies: 1) to U.S. Persons, including U.S. Citizens, lawful permanent residents, and other narrow categories including refugees and asylees, or 2) to certain foreign nationals that have received an export license. Pay Details: 52.88 to 60.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Company DescriptionSince 1977, the PDS family of companies has become among the largest and most respected staffing companies in the United States. A vital part of the PDS family, PDS Tech Commercial connects highly skilled employees with Fortune 500 clients’ needs for project support such as contingent labor, statement of work/offload engineering projects, and permanent placements. PDS Tech Commercial has staffing partnerships with leading organizations based in the United States and globally. We hire jobseekers daily for openings across skill categories, including Engineering, IT, Business Professional, Administrative, Accounting/Finance, Skilled Trades and Industrial. We offer eligible associates an ala carte benefits package, that can include direct deposit, free career counseling, 401(k), select paid holidays, short-term disability insurance, skills training, employee referral bonuses, and an affordable medical coverage plan. Now part of The Adecco Group, our shared synergies combined with the investment Adecco continues to make in PDS offers significant advantages to both clients and associates alike. We share Adecco’s dedication to unlocking our Associates’ potential by unleashing the Future@Work and to the importance of human and labor rights, diversity and inclusion, environmental responsibility, and more.Since 1977, the PDS family of companies has become among the largest and most respected staffing companies in the United States. A vital part of the PDS family, PDS Tech Commercial connects highly skilled employees with Fortune 500 clients’ needs for project support such as contingent labor, statement of work/offload engineering projects, and permanent placements.\r\n\r\nPDS Tech Commercial has staffing partnerships with leading organizations based in the United States and globally. We hire jobseekers daily for openings across skill categories, including Engineering, IT, Business Professional, Administrative, Accounting/Finance, Skilled Trades and Industrial.\r\n\r\nWe offer eligible associates an ala carte benefits package, that can include direct deposit, free career counseling, 401(k), select paid holidays, short-term disability insurance, skills training, employee referral bonuses, and an affordable medical coverage plan.\r\n\r\nNow part of The Adecco Group, our shared synergies combined with the investment Adecco continues to make in PDS offers significant advantages to both clients and associates alike. We share Adecco’s dedication to unlocking our Associates’ potential by unleashing the Future@Work and to the importance of human and labor rights, diversity and inclusion, environmental responsibility, and more.

Job Description At Forms+Surfaces, design and engineering converge to shape the built environment with intention and impact. As a Technical Sales Engineer specializing in Architectural Products, you will serve as a technical subject matter expert across our product lines, architectural systems and surfaces, supporting design and engineering assist efforts and enabling accurate, efficient specification and detailing. You’ll work alongside our field sales team and in collaboration with architects, interior designers, and contractors to bring forward system clarity that supports both project performance and internal manufacturability. This role bridges innovation and practicality, ensuring our solutions are seamlessly integrated into the spaces we help shape. Key Responsibilities: • Serve as the technical liaison between F+S Architectural Products and external stakeholders, translating conceptual design goals into system-based product solutions., • Collaborate directly with architects, designers, and construction professionals to clarify system capabilities, define scope, and formalize technical product details - guiding engineering efforts and easing project management workload by translating requirements into clear, actionable plans, • Support field sales employees across the U.S. with pre-sales design assist efforts including technical presentations, detail development, and coordination with internal engineering resources., • Provide expert-level consultation on F+S architectural surfaces and systems, including walls, elevator interiors, column covers, and related assemblies., • Interpret design intent and align it with manufacturable solutions, ensuring specifications support internal operational efficiency and production feasibility., • Contribute to the development of standard installation details, CAD resources, and specification documents in collaboration with product engineering and marketing., • Bachelor's degree in engineering, Architecture, Industrial Design, or related technical discipline., • 5+ years of experience in technical sales, architectural products, or system-based product engineering., • Strong understanding of construction documents, technical detailing, and material performance in commercial environments., • Proficiency in reading and developing architectural drawings and product integration details., • Skilled communicator with the ability to explain complex systems in a clear, practical manner to both internal and external stakeholders., • Hands-on experience with manufacturing processes and material selection, including a strong understanding of fabrication techniques. Experience collaborating with production teams to translate design intent into scalable, cost-effective manufacturing solutions., • Working knowledge of building codes and industry standards (IBC, ADA, ANSI, ASTM) to ensure compliant, functional design of architectural products for commercial and public spaces., • Proficiency with CAD tools (AutoCAD, SolidWorks) and Revit families preferred., • A collaborator who thrives at the intersection of design, manufacturing, and technical communication., • Solution-oriented, with a passion for practical innovation and design excellence., • Motivated to contribute to sustainable, enduring solutions in the built environment. Company DescriptionForms+Surfaces is a leading designer and manufacturer of a wide range of architectural products used in public spaces around the globe. Our growing brand is known for its breadth of product lines, including interior surface materials, elevator interiors, doors and hardware, information displays, wall systems, columns, railings, as well as outdoor architectural products.Forms+Surfaces is a leading designer and manufacturer of a wide range of architectural products used in public spaces around the globe. Our growing brand is known for its breadth of product lines, including interior surface materials, elevator interiors, doors and hardware, information displays, wall systems, columns, railings, as well as outdoor architectural products.

Job DescriptionSenior Industrial Engineer – Capacity & Space Planning Location: Goodyear, AZ Department: Engineering / Operations Employment Type: Full-Time | On-Site About GTI Energy GTI Energy, a division of GTI Fabrication, is a rapidly growing industrial manufacturer specializing in mission-critical modular infrastructure for energy, defense, and heavy industrial markets. With operations expanding across multiple facilities, GTI is building a world-class engineering and manufacturing network to support advanced fabrication projects at scale. We are seeking a highly skilled Industrial Engineer with expertise in capacity planning and multi-plant space optimization to join our team in Goodyear, AZ. Position Overview The Industrial Engineer will play a pivotal role in forecasting production capacity and leading plant-level space planning initiatives across GTI’s expanding manufacturing network. This role will analyze long-term production demands, design optimal facility layouts, and drive strategic infrastructure projects to support GTI’s rapid growth and new plant launches. You will collaborate with cross-functional teams—including operations, engineering, supply chain, and finance—to ensure GTI’s manufacturing footprint is designed to scale efficiently, safely, and cost-effectively. Key ResponsibilitiesCapacity Analysis & Forecasting * Conduct detailed studies to evaluate current manufacturing system capacity, output rates, equipment utilization, and labor efficiency. * Build and maintain capacity models and forecasting tools for production lines, assembly areas, and plant-level operations. * Analyze historical production data and future demand projections to forecast short-, mid-, and long-term capacity needs. * Identify potential constraints proactively and recommend strategies for scaling production to meet business growth. Space Planning & Layout Design (Plant-Level) * Lead enterprise-wide space planning across multiple GTI manufacturing facilities to align capacity, workforce, and material flow with long-term growth plans. * Evaluate and design new greenfield and brownfield facilities, including conceptual layouts, infrastructure planning, and space allocation for production, warehousing, and logistics. * Create and maintain master plant layout plans, modeling space utilization and resource needs over multi-year horizons. * Oversee major site expansions, consolidations, and reconfigurations to maximize operational efficiency and minimize disruption to active production. * Coordinate with operations, safety, engineering, and finance leaders to ensure layouts meet production, safety, and ergonomic standards while supporting rapid ramp-up timelines. Project & Capital Management * Manage large-scale capital projects tied to capacity increases, equipment installations, and facility expansions. * Develop project scope, schedule, budget, and ROI justifications for capital expenditure requests. * Coordinate cross-functional teams—including facilities, production, quality, supply chain, and logistics—to ensure timely and on-budget project execution. * Provide project status reporting and metrics to leadership. Required Technical Skills * Bachelor’s degree in Industrial Engineering, Mechanical Engineering, or related field. * 5+ years of experience in manufacturing or industrial engineering, with emphasis on capacity planning and facility layout optimization. * Advanced proficiency with CAD tools (AutoCAD preferred) for facility and layout design. * Familiarity with simulation modeling tools (FlexSim, ProModel, or similar) and statistical analysis software (JMP, Minitab). * Strong Excel skills (formulas, pivot tables, v-lookups, charts, and data modeling). * Knowledge of Lean Manufacturing and continuous improvement methodologies. * Familiarity with ERP systems (NetSuite preferred) and manufacturing data environments. Key Soft Skills * Strong analytical and problem-solving capabilities with a systems-level mindset. * Exceptional organizational and project management skills with experience managing multiple large-scale initiatives. * Excellent written, verbal, and presentation skills to communicate effectively with stakeholders and leadership. * Highly collaborative, able to influence cross-functional teams, and driven by continuous improvement. * Self-starter who thrives in fast-paced, evolving environments. Why Join GTI Energy * Shape the future of GTI’s growing manufacturing network * Lead high-impact, strategic capacity and plant planning initiatives * Competitive salary and benefits * Collaborate across engineering, operations, and leadership in a hands-on environment * Be part of a fast-growing company building critical infrastructure for energy and defense

Job Description United Integrated Services (USA) Corp. was founded in Phoenix, Arizona in 2020. UIS is a U.S. subsidiary of United Integrated Services Co., Ltd. (UIS Taiwan) which was founded in Taiwan in 1982. UIS is a multidisciplinary engineering and construction company. We provide fully integrated design-build services to our clients in the high-technology industry for their manufacturing facility needs. Our scope of services includes engineering design, high-tech factory planning, and on-time equipment and material delivery in which clean-room systems, HVAC, electrical systems, and tool hook-up, are all vital parts in need of total coordination. Summary: United Integrated Services (USA) is searching for a skilled and dedicated Air Abatement System (AAS) Engineer to join our team. The successful candidate will be responsible for designing, implementing, and maintaining air filtration systems in a cleanroom environment, ensuring compliance with semiconductor production regulations and standards. Experience in HVAC is highly desired. This is a full time onsite position located in North Phoenix, AZ (85027). Essential Duties and Responsibilities include the following. Other duties may be assigned. • Perform requirements classification of clients, communicating project requirements and design review with internal & external design team for Air Abatement System (AAS), such as, process exhaust duct, scrubber for waste air treatment, and dosing chemical., • Assist in the design and implementation of HVAC pipes, water supply and drainage pipes, and chemical acid supply pipes., • Perform the required scope of work and clarify specification with stakeholders., • Assist procurement team on the procurement of AAS systems equipment & materials' and assist in contractors' awards., • Understand isometrics, P&ID and CAD drawings specifically for AAS systems., • Review, approve and oversee the installation of AAS systems., • Inspect work in progress to ensure that workmanship conforms with specifications and assure adherence to construction schedules., • Review progress reports, materials used and costs, contract payment application, and adjust work schedules as indicated by the reports., • Review & reply RFI (Request for information) and change orders., • Provide daily, weekly, and monthly reports for internal use and client communication., • Identify and solve problems., • Scheduling and schedule execution., • Understand drawing, and review specifications and estimation., • Other responsibilities as assigned. Qualifications: The requirements listed below are representative of the knowledge, skill, and/or ability required. Education/Experience: * • Bachelor's degree in Mechanical Engineering, Construction Management, or a related field., • Strong understanding of process exhaust duct sizing & layout, mechanism of scrubber for waste air treatment., • Strong understanding of HVAC pipes, water supply and drainage pipes, and chemical acid supply pipes., • Proficiency in Microsoft Office Suite products (Word, PowerPoint, Excel, Outlook, Teams)., • Ability to use engineering software, such as AutoCAD, Primavera, or others., • Excellent organizational and time management skills., • High level of attention to detail, and highly organized., • Ability to act with integrity, professionalism, and confidentiality., • Ability to effectively prioritize responsibilities depending on project needs. Ability to effectively present information and respond to questions from groups of managers, and employees., • Ability to develop and maintain successful relationships with all levels of employees, clients, and subcontractors., • Must be able to work under pressure and meet deadlines while maintaining a professional attitude., • Effective English verbal and written communication skills required., • Ability to communicate in Mandarin/Taiwanese is a plus., • Ability to effectively present information and respond to questions from groups of managers, customers, and employees., • Read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Write routine reports and correspondence. Nice to have: • Start-up experience., • Verbal communication skills in Mandarin., • Professional Engineer license. Additional Requirements: • Must have and maintain a valid Arizona driver's license. May be required to travel to other sites within Arizona to perform certain work functions. Physical Demands & Work Environment This position requires the ability to lift and carry up to 50 lbs for transporting documents, equipment, and other materials as needed. The role involves extended periods standing, walking and/or of sitting while working at a computer. Frequent movement between the construction trailer and various areas of the construction site is necessary. The position is based at the construction job site (trailer office). Even though the exposure of hazardous work conditions would be minimal, the employee may be required to visit the work area of the jobsite and thus be exposed to some typical work hazards that may be present on a construction site, such as dust, moving machineries, weather, caustic chemicals, noise etc. UIS would provide the required safety protection to ensure the safety of UIS employees and comply with all OSHA standards. Equal Employment Opportunity: UIS is an Equal Opportunity Employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, veteran status. Or any other characteristic protected by federal, state, or local law. We believe in fostering a diverse and inclusive workplace where all individuals are treated with respect and dignity. Disclaimer: The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties as assigned by their supervisor.

Job Description Electro Mechanical Engineering Manager | GTI Fabrication – Buffalo, NY | Phoenix, AZ Location: Buffalo, NY or Phoenix, AZ Full-Time | Electro Mechanical Engineering | Leadership | Competitive Salary + Benefits Company Overview GTI Fabrication is a leader in the design, engineering, and fabrication of custom modular structures, including shipping container-based solutions and ballistic metal fabrication. We serve industries such as DOD contractors, military, disaster relief, and commercial sectors, with manufacturing taking place in our state-of-the-art facility in Buffalo, NY. Our engineering team designs and builds solutions ranging from military training enclosures and live fire ranges to energy storage systems, medical facilities, expeditionary camps, and more. Position Overview We are seeking an experienced Electro Mechanical Engineering Manager to lead our electrical design team. This role will act as the subject matter expert (SME) in electrical engineering, oversee day-to-day operations of the team, and actively participate in the design, development, and testing of electrical systems for large-scale modular metal enclosures and other industrial projects. This individual will work cross-functionally with other engineering leaders and company executives, while also driving technical excellence and mentorship within the team. Key Responsibilities Electrical System Design & Development * Design, develop, and test advanced electrical systems and components * Conduct signal processing, circuit analysis, and system optimization * Perform root cause analysis and troubleshoot electrical issues Technical Leadership & Team Management * Directly oversee and mentor the electrical engineering team * Provide guidance and expertise during system design reviews and project planning * Participate in company leadership meetings to communicate project updates Cross-Functional Collaboration * Collaborate with mechanical design, software, and project management teams * Integrate electrical designs with hardware, software, and industrial systems * Interface with customers and vendors when needed for technical discussions Documentation & Compliance * Create and maintain detailed technical documentation: schematics, diagrams, and specifications * Ensure designs comply with industry standards and regulatory requirements Required Qualifications ✔ Bachelor’s Degree in Electrical or Mechanical Engineering or related field ✔ Minimum 6 years of electrical engineering experience, with at least 3 years in a management or team leadership role ✔ Expertise in CAD software for electrical design (SolidWorks Electrical or equivalent) ✔ Strong knowledge of Industrial Electrical Power Systems ✔ Proficient in signal processing, circuit design, and troubleshooting techniques ✔ Ability to lead, mentor, and develop engineering teams Preferred Qualifications ✔ Master’s Degree in Mechanical or Electrical Engineering or related field ✔ Experience with battery storage, photovoltaics (PV), and renewable energy systems ✔ Familiarity with large-scale enclosure design and modular electrical integration Why Join GTI Fabrication? ✔ Lead complex and impactful modular and industrial projects ✔ Collaborate with cross-disciplinary experts in a growing company ✔ Competitive salary and full benefits package ✔ Be a part of critical projects that support defense, energy, and emergency response industries Apply Today to take your electrical engineering leadership career to the next level at GTI Fabrication!

Job Description Atwell, LLC is a bold leader in the consulting, engineering, and construction services industry, delivering a broad range of creative solutions to clients in the real estate & land development, and energy markets. We have a strong national presence and a diverse, award-winning project portfolio. Atwell is a privately owned company, with 2,000+ passionate team members across 55+ locations and growing! Atwell, LLC is a proud recipient of the following 2024 awards: • Nine consecutive years in a row as a "Best Place to Work" (#16) by Zweig Group, • Recognized as #10 in the "Top 100 Fastest Growing AEC Firms" in the U.S. by Zweig Group, • Recognized as #71 in the ENR Top 500 Design Firms, ranked in every region., • Recognized in Crains "Fast 50" as one of the fastest-growing firms based in Michigan., • Recognized in Crains Magazine as one of Michigan's largest privately held companies. As a Survey CAD Technician at Atwell, you will work on diverse projects with various sizes, scopes, and details. You will work in a flexible work environment with a fantastic culture and a national presence. We are looking for Survey Technicians who are interested in being subject matter experts in land development, renewable energy, and construction projects. * Resourceful Support: • Act as a valuable resource for design staff, guiding drafting practices and procedures. CAD Proficiency: • Utilize AutoCAD Civil 3D and related engineering software to complete assignments, ensuring they align with Atwell's standards. Drawing Production: • Generate various drawings specific to projects, including ALTA, Final Plats, Maps of Dedication, construction layouts, and construction staking. Survey Data Analysis: • Review project survey data to analyze existing site conditions, considering factors like legal descriptions, ALTA Surveys, easement documents, and condo documents. Plan Modification: • Responsibly edit and modify plans in line with revisions from agencies, municipalities, and clients, following directives closely. Workflow Coordination: • Minimum of 6+ years of previous AutoCAD Civil 3D Experience, • Experience with Trimble Business Center (TBC) Preferred, • High School Diploma Required, Associated Degree Preferred, • Thorough understanding of ALTA's, Topo's, Boundaries, and Construction Staking #LI-BL1 Pay Range $22—$42 USD Atwell Benefits: To attract and retain the best professionals in the industry, we aim to provide an excellent working environment and a progressive benefits program designed to support your personal and professional needs. Work/Life: • Generous Paid Time Off, • Paid Parental Leave, • Flexible work schedules are available for some positions, • Competitive Compensation packages, • Annual bonuses, spot bonuses and peer recognition awards, • 401K match - 1:1 up to 4% of compensation, • Tuition Assistance, • Student Loan Repayment up to $25K, • Paid Licensing / Certification Fees and Renewals, • Financial Rewards for Obtaining Licensure, • Employee Referrals up to $5,000, • Annual Wellness Reimbursement up to $500 for anything wellness related (Gym memberships, fitness tracker, home gym equipment, etc.), • Medical (BC/BS), Dental (Delta), and Vision (VSP), • Family Planning & IVF Benefits, • Pet Insurance, • Health Savings Account & Flex Spending Account options, • Employer paid LTD, STD, and life insurance, • Metlife Supplemental Benefits covering accident, hospitalization, and critical illness, • Member Assistance Program (MAP) with complimentary counseling sessions, legal benefits, financial consultations, and work/life referral services

Job DescriptionJob Title: CAD AdministratorLocation: Goodyear, AZ (On-Site) Department: Engineering Reports To: Director of Engineering Employment Type: Full-Time | ExemptAbout GTI EnergyGTI Energy, a division of GTI Fabrication, is a leader in industrial modular fabrication—serving energy, defense, and heavy industrial markets. With advanced engineering and manufacturing facilities in Arizona and New York, GTI designs and builds mission-critical modular systems, including data centers, enclosed battery systems, and energy storage devices.As we continue to expand, we are enhancing our engineering systems infrastructure to drive collaboration, efficiency, and precision across mechanical, electrical, and structural design disciplines.Position OverviewGTI Energy is seeking a skilled CAD Administrator to lead the implementation, management, and optimization of GTI’s CAD and design data systems. This individual will serve as the technical expert and process owner for SolidWorks, SolidWorks PDM, AutoCAD, Revit, and related engineering tools used across the company.The CAD Administrator will be responsible for maintaining system integrity, standardizing workflows, enforcing design standards, and ensuring all engineering teams—mechanical, electrical, and structural—operate efficiently and cohesively.This is a hands-on role requiring both strategic and tactical ownership of CAD systems, templates, and data management processes.Key ResponsibilitiesSystem Administration & Configuration • Administer and maintain GTI’s CAD environment, including SolidWorks 3DExperience, SolidWorks PDM, AutoCAD, and Revit., • Lead the migration from 3DExperience to SolidWorks PDM, overseeing configuration, data migration, and user adoption., • Manage user access, workflows, and permissions within CAD/PDM platforms to ensure compliance and data integrity., • Maintain system templates, drawing standards, and libraries for consistency across disciplines., • Support integration between CAD systems and GTI’s Dozuki work instruction software to ensure seamless flow of engineering data to the production floor.Training & Support, • Develop and deliver user training on CAD best practices, standards, and PDM workflows., • Provide first-line support for CAD-related issues, troubleshooting modeling, file management, and workflow challenges., • Coach engineers and designers on efficient modeling techniques, revision control, and system utilization.Process Development & Standardization, • Establish and enforce company-wide CAD standards for file naming, revision management, and design documentation., • Collaborate with mechanical, electrical, and structural engineering teams to align processes across product lines., • Partner with manufacturing engineering to ensure design outputs are production-ready and optimized for fabrication.Engineering Systems Leadership, • Act as GTI’s subject matter expert for CAD/PDM system selection, configuration, and continuous improvement., • Participate in defining GTI’s long-term CAD and design systems roadmap., • Evaluate and recommend tools to improve collaboration, version control, and design throughput.Cross-Functional Collaboration, • Work closely with the IT, Engineering, and Operations teams to align CAD system capabilities with business needs., • Coordinate with suppliers and external engineering partners to ensure compatibility and compliance with GTI data standards., • Support new product introduction (NPI) and design change processes through proper CAD/PDM integration.Required Qualifications, • Bachelor’s degree in Mechanical, Industrial, or Design Engineering—or equivalent experience., • 5–8 years of experience administering SolidWorks, AutoCAD, or Revit environments in a manufacturing or industrial setting., • Demonstrated expertise in SolidWorks PDM (Professional or Manage) setup, workflow design, and user management., • Strong understanding of mechanical, electrical, and structural design principles and how they integrate in complex assemblies., • Experience developing and maintaining CAD standards, templates, and libraries., • Excellent communication, documentation, and cross-functional collaboration skills., • Proven ability to train and mentor design teams across disciplines.Preferred Qualifications, • Experience leading CAD system migrations (e.g., from 3DEXPERIENCE to PDM)., • Familiarity with industrial fabrication, modular steel construction, or energy storage systems., • Exposure to PLM systems or 3DEXPERIENCE, even if not directly responsible for implementation., • Experience integrating CAD data into work instruction platforms (Dozuki or similar)., • Knowledge of lean manufacturing principles and design-for-manufacturability (DFM) practices.Why Join GTI Energy, • Shape the future of GTI’s digital engineering systems infrastructure., • Collaborate with world-class engineers across multiple disciplines., • Competitive salary, benefits, and growth opportunities., • Be part of an innovation-driven team building mission-critical modular solutions for global markets.

Job Description SWISS/TURN-MILL CNC PROGRAMMER Job Title: Swiss/Turn-Mill CNC Programmer Company: Custom Control Sensors, LLC Location: Phoenix, AZ. Employee Type: Full Time Non-Exempt Industry: Manufacturing Job Type: Machine Shop Education: High School Diploma or GED Experience: Technical certificate from trade school/community colleges on CNC machining And/or programming. Five or more years’ experience of Swiss and /or Turn- Mill programming using leading CAD/Cam system such as Part-Maker, FeatureCam, etc. Able to set-up and produce First Piece on Swiss and/or Turn- Mill lathes Date Effective: 04/30/2024 Date Modified: 04/30/2024 Company Overview: Custom Control Sensors, LLC (CCS) is a global leader in the design, development, manufacturing and supply of pressure, temperature and liquid flow switches and sensors for the Aerospace, Defense and Industrial markets. Since 1957, CCS has been providing high reliability electro-mechanical devices that utilize the "DUAL-SNAP" action disc spring principle pioneered by Custom Control Sensors. CCS’ Airborne Division provides standard and custom switches, sensors and transducers to the aerospace, defense, commercial aviation and government markets. CCS also supplies original PMA parts for various Boeing, Airbus and business aviation aircraft. CCS’ Industrial Division provides pressure and temperature switches, sensors and transmitters for process control of global oil & gas, petro-chemical, power generation, steel manufacturing, tire manufacturing, automotive, medical and various other industrial equipment. CCS is an ISO 9001 and AS 9100 certified company. Industrial Product certifications include UL, CSA, ATEX, GOST, CCC and IECEx. CCS is a growth-orientated company focused on building an energetic and vibrant work environment. We work to foster the interaction and collaboration between all associates at CCS, the connection with our customers and the opportunity for creativity. CCS is an established company with global resources offering individual opportunities to affect positive change. One person can make a great impact on our company’s success. Job Description: The Swiss/Turn-Mill CNC Programmer will manage the CNC-program creation process for machine shop with expanding CNC Swiss lathes, CNC Turn-mill lathes, CNC 3 axis lathes, CNC 2 axis lathes and CNC 3 axis mills. .Key Responsibilities: Interprets drawings, create new solid models (where necessary) to generate CNC programs for Swiss lathes and/or multi-axis Turn-Mill (double-turret, double-spindle) machines CNC 3 axis lathes, CNC 2 axis lathes and CNC 3 axis mills. Using CAD/CAM system (preferably Part-Maker, FeatureCam, etc.) • Include proper methodology, tooling, cutting speeds and feeds in order to generate quality parts in accordance to product specifications., • Set-up to produce First Piece on the Swiss, Turn-Mill machines, CNC 3 axis lathes, CNC 2 axis lathes and CNC 3 axis mills. Run jobs when required. Studies and interprets drawings, specifications or sample parts to determine dimensions and tolerances of finished work pieces, sequence of operations, and set-up requirements to maximize efficiency., • Creates set-up sheets (tool list, x-y-z home positions) and communicate with set-up machinists of the tooling requirements, fixtures, etc., • Monitors and verifies the accuracy of each job’s initial set-up and final outcome., • Revises, update, and maintain all programs and documents based on engineering changes or per process improvement projects dictate., • Work with machine shop supervisor/manager on process improvements and cycle time reductions including testing of new cutting tools and new processes to balance main/sub cycle time., • Communicates with set-up machinists and/or Machine Shop Supervisor/Manager regarding tooling/fixtures/material requirements for upcoming and/or existing jobs on the floor., • Provides shop floor assistance with inspection methods, training on machines, machine alarms, and program issues., • Applicant must be ITAR compliant., • 5+ years of experience programming Swiss CNC Machines and/or Turn-Mill lathes (Tsugami, Star, and double-spindle + double-turret CNC machines) preferred and CNC 3 axis lathes, CNC 2 axis lathes and CNC 3 axis mills., • Deep understanding of machining fundamentals or formula correlation of machining parameters (i.e. SFM, RPM, IPR, IPT, etc.) on cutting tool, work-piece materials, etc., • Knowledge of newer Fanuc controls (18i, 31i), including Tsugami machines (S-series, B0-series,) multi-axis turn-mill centers and ability to learn and adapt to ever changing technology, • Knowledge of measuring equipment and the application of such instruments, including but not limited to calipers, micrometers, depth gauges, indicators, comparators., • Deep understanding of mechanical drawings and specifications and ability to interpret geometric tolerances and dimensions call-outs on drawings., • Detailed knowledge of programming segments and corresponding operations., • Working knowledge of various tool holders, cutting tools, boring bars and inserts used on various machines, • Knowledge and understanding of AS9100 quality system., • Proficient level of Microsoft Office Suite (Microsoft Word, Outlook, and Excel, etc). While performing the duties of this job, the employee is continuously required to stand, use hands and fingers to flex and extend fingers with opposition of thumb-palmar grasp, to frequently walk, bend, stoop, reach, turn, twist, push, pull and to occasionally crouch or kneel. Talk or hear, and to move within the areas of the facilities and parking lots. The employee must also occasionally lift and/or carry objects or loads under 30 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, color vision, depth perception and the ability to adjust and focus. An annual eye exam may be required. EEO M/F/D/V Custom Control Sensors, LLC. is an Equal Opportunity/Affirmative Action employer. All qualified applicants for employment shall receive fair and equal treatment regardless of their race (including hair texture and protective hairstyles, such as braids, locks, and twists), color, religion, creed, sex/gender, marital or registered domestic partnership status, age, national origin or ancestry, citizenship, pregnancy, childbirth, breastfeeding or related medical conditions, mental or physical disability (including HIV and AIDS), medical condition including genetic information or characteristics (including those of family members), sexual orientation, veteran or military status, gender identity, gender expression, transgender status or any other basis protected by federal, state or local law, ordinance or regulation. The policy not to discriminate includes, but is not limited to, advertising for positions, recruiting, hiring, placement, promotion, transfer, rates of pay, discipline and termination.

Job Description Job Title: Electrical Engineer III Company: Custom Control Sensors, LLC Location: Phoenix, AZ Employee Type: Full Time Exempt Industry: Aerospace Manufacturing Job Type: Engineering Education: Four Year BSEE Degree; MSEE Degree a plus Experience: Five years to eight electronic product design and testing experience with BSEE Three to five years electronic product design and testing experience with MSEE Company Overview Custom Control Sensors, LLC (CCS) is a global leader of pressure, temperature, and liquid flow switches and sensors for the Aerospace, Defense, and Industrial markets. Since 1957, we have provided high-reliability electro-mechanical devices that utilize the "DUAL-SNAP" action disc spring principle we pioneered. We are AS 9100 and ISO 9001 certified. Industrial Product certifications include UL, CSA, ATEX, GOST, CCC and IECEx. We are growth-orientated, and dedicated to the continued cultivation of a vibrant, energetic work environment. Fostering interaction and collaboration between all associates, connection with our customers, and opportunity for creativity is our primary focus. Benefits • Medical, • Dental, • 401k with Match, • Employer funded Life Insurance and Long-term Disability, • Voluntary Short-term Disability, • Sick and Vacation Leave A skilled Electrical Engineer with specialized experience in micro electronic product design and testing. The position is responsible for designing, developing and testing micro-scale electrical systems and components, ensuring high performance, reliability and compliance with industry standards, related to CCS’ pressure and temperature sensor products. Products include pressure transducers and transmitters utilizing silicone piezo resistive MEMS, Thin Film, Capacitive and SOI sensors for pressure applications; and wire wound RTD’s (Resistance Thermal Detectors) for temperature sensing applications. The role requires a strong technical background in electrical engineering, hands-on testing expertise, and the ability to collaborate across multidisciplinary teams. Key Responsibilities: • Perform sensor design, development and testing efforts under direction, in accordance with customer specifications, on a variety of separate projects;, • Review customer specifications and assist with technical proposals on new sensor applications;, • Design and develop micro electrical systems, including circuit layouts, schematics, and PCB (Printed Circuit Board) designs for small-scale sensor applications., • Perform simulations and modeling of electrical components using tools such as SPICE, LT SPICE, ALTIUM or equivalent software;, • Conduct testing and validation of electrical designs, including functional, stress and environmental testing to ensure performance and durability;, • Perform sensor testing using a variety of pressure, temperature and electronic equipment;, • Calibration and temperature compensation of pressure sensors;, • Hands-on prototyping and testing of new designs to verify operational performance and reliability;, • Create and maintain detailed documentation, including design specifications, test plans; test activities and results; and other technical reports;, • Prepare ATPs, QTPs, QTRs, reliability, maintainability and other documents as needed;, • Participate in internal CCS and external customer design reviews;, • Collaborate with cross-functional teams, including mechanical engineers, quality engineers, manufacturing and assembly personnel, before new design released for production, to ensure product meets manufacturability and yield rate (>95%) requirements;, • Collaborate with peers, supervisors, and managers to improve efficiency and reduce component costs in development and production;, • Troubleshoot and debug electrical systems at component level, identifying root causes of sensor failures and implementing effective corrective action solutions;, • Stay current with advancements in micro electrical technologies, materials, and testing methodologies to drive continuous improvement in design and productions processes;, • Ensure compliance with industry standards (eg., IPC, IEEE) and safety standards throughout the design and testing phases;, • Interface with external hardware/software resources;, • Work is stated in terms of objectives, requiring project planning and judgment;, • May have overall project responsibility;, • Applicant must be ITAR compliant;, • 4 year BSEE degree; MSEE degree is a plus;, • 5+ years relevant experience in micro electrical design and testing;, • Proficient in CAD tools for electrical design (e.g., Altium, Orcad, Dip trace or equivalent PCB design tools) and embedded software architecture;, • Competent in PCB design and experience with design software tools including layout of different layers, trace width, via, component packages, pad arrangements and surface mount technologies (SMT);, • Experience with embedded designs (microprocessor, RAM, EEPROM), analog circuit design (OP-Amps, Filters, SPICE simulation), power supplies, digital circuit design, signal conversion and filtering, signal quality analysis and frequency response;, • Hands-on experience with electronic test equipment such as: power supplies, multi-meters, dielectric, insulation resistance, spectrum analyzers and logic analyzers;, • Experience with LABVIEW, PYTHON or similar test software;, • Proficient in the use of business software – MS Project, Excel, Word and Power Point;, • Proficient knowledge of Quality Control processes and various stages of production process;, • Excellent problem solving skills and attention to detail, with a focus on precision at the electronic component level;, • Strong written and verbal communication skills, with the ability to present technical concepts to technical and non-technical stakeholders (e.g., engineers, customers and production operators);, • Ability to effectively work from written travelers, blueprints, schematics and quality reports;, • Ability to work independently and in a collaborative team environment, managing multiple priorities in a fast paced setting;, • Ability to react to changes productively, and perform other essential tasks as assigned;, • Keep quality up to acceptable standards with little discrepant work;, • Perform tasks equal to or exceeding established standards;, • Effective time and project management skills;, • Continuous improvement focus;, • Availability, flexibility, and maturity to represent the company;, • IPC-2221 PCB Design, • IPC-J-STD-001, -002, • Experience with wire bonding and pull testing processes;, • Familiarity with EMI noise filtering circuit protection;, • RTCA-DO 160 & 254 Aerospace Standards knowledge;, • Familiarity with Failure Mode and Effect Analysis (FMEA) and Reliability Engineering; The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is continuously required to sit, talk or hear, and flex and extend fingers with opposition of thumb; palm grasp. The employee is frequently required to stand, walk, bend, reach with hands and arms, and to move within all areas of the facilities and parking lots. The employees are occasionally required to bend, turn push, pull, and kneel. A computer is used to access, input, and retrieve data. The employee must occasionally lift and/or move up to 20 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, color vision, depth perception and the ability to adjust and focus. EEO M/F/D/V Custom Control Sensors, LLC. is an Equal Opportunity employer. All qualified applicants for employment shall receive fair and equal treatment regardless of their race (including hair texture and protective hairstyles, such as braids, locks, and twists), color, religion, creed, sex/gender, marital or registered domestic partnership status, age, national origin or ancestry, citizenship, pregnancy, childbirth, breastfeeding or related medical conditions, mental or physical disability (including HIV and AIDS), medical condition including genetic information or characteristics (including those of family members), sexual orientation, veteran or military status, gender identity, gender expression, transgender status or any other basis protected by federal, state or local law, ordinance or regulation. The policy not to discriminate includes, but is not limited to, advertising for positions, recruiting, hiring, placement, promotion, transfer, rates of pay, discipline and termination.

Job Description You already LOVE us and the SNACKS WE MAKE! Chips, Cookies, Crackers, Wafers, Cheese Curls, Popcorn, Tortilla Chips... yeah, we make them ALL! Shearer's is the company behind all your favorite snack brands. We have over 5,000 associates in 17 state-of-the-art manufacturing and warehouse sites in North America that produce over 800 million pounds of snacks per year. Did you know that we buy 20% of all the potatoes grown in the US? WOW! And we know what you're thinking…how can I get my hands on some free goodies? Our team members can take home free snacks! Maintenance Automation Controls TechnicianShift: Morning 5:45 AM - 6 pm | 2,2,3 rotation schedulePay Rate: $42.50/hour - Shift C Your seat at the best snacks table This position is responsible for upkeep and maintenance of the controls and automation equipment which includes troubleshooting, performing program backups, and system upgrades. Direct involvement with cross-functional team that include safety, quality, engineering, and production. This position will provide technical guidance to other members of the maintenance team and other technical members of Shearers to develop higher controls capabilities across the network. Essential Duties and Responsibilities • Execute tasks in a safe manner. Embrace and help to develop a people safety first culture., • Perform advanced troubleshooting functions by using the PLC and HMI code to diagnose issues that are causing downtime., • Ownership of regular program backups and ensure that all program changes adhere to Shearer's safety and quality standards., • Perform all assigned maintenance tasks such as preventative maintenance, corrective maintenance, and inspections., • Develop and train maintenance personnel on control systems and functions., • Provide recommendations for equipment upgrades to avoid obsolescence issues., • Continually improve knowledge base regarding advances in parts, equipment, and processes to keep abreast of changes and innovations in equipment selection., • Develop and execute PM's on controls equipment and control cabinets, • Assist in the development of base line safe work performance expectations and work practices. Identify and correct any unsafe condition and identify and unsafe action observed. · Ability to make changes to existing PLC and HMI programs to improve the process. Knowledge Skills and Abilities • Full familiarity with computer programs such as Auto-Cad, Microsoft Office, etc., • Strong Electrical troubleshooting and understanding o RSLogix 500 o Studio 5000 o Connected Components Workbench (CCW) o FactoryTalk View Studio o MicroLogix o CompactLogix o ControlLogix o Panelview o Powerflex • Familiarity with high-speed manufacturing and packaging processes, operations and associated machinery., • Ability to read and interpret electrical, hydraulic, and mechanical prints., • ABB & Fanuc Robot programming (and others) Education and/or Experience Required The employee is regularly: • Required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; and talk or hear., • Occasionally required to sit. The employee must be able to enter, egress and traverse areas inside and outside of machinery, and must be able to climb ladders for purposes of inspection. The employee in this position works with safety critical products, therefore are required to have the ability to differentiate colors that are critical to job performance. Position requires climbing and balancing around and on top of machines while simultaneously using various hand tools. The employee must have full range of motion necessary for moving in and out of all positions. Employee must have good sensation essential to gauge heat exposure when working around hot equipment, dies or furnaces. Work Environment The employee is occasionally exposed to outside weather conditions and risk of electrical shock. The noise level in the work environment is usually moderate. This job is performed in a shop environment: hazardous materials; greasy, slippery factory floors. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. This job description will be reviewed periodically as duties and responsibilities change with business necessity. All job functions are subject to modification. We Offer a Feast of Benefits after 30 days Medical, Dental, Vision, Life, Flexible Spending Account, Retirement Savings Plan with Match, Short Term Disability, Long Term Disability, Group Critical Accident Insurance, Group Critical Illness Insurance, Employee Assistance Plan and numerous opportunities to volunteer in the communities in which we operate. Paid Time Off (PTO) available after 90-days. You will be considered for employment in our inclusive workplace Because at Shearer's, we are committed to providing equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, amnesty, protected veteran status, or any other characteristic protected by law. This is your invitation to apply now! [Maintenance]

Job Description Sales Engineer – SlowStop® Protective Guarding Systems Impact Recovery is seeking a Sales Engineer - SlowStop® Protective Guarding Systems, located in the Western US, who possesses strong technical expertise and an ability to drive sales. In this role, you will be responsible for analyzing customer needs, proposing engineered solutions, and leading the sales process for industrial and commercial safeguarding products. Your unique blend of technical knowledge and consultative selling skills will play a key role in helping clients protect their people, property, and equipment. Responsibilities 1. Technical Sales & Consultation 2. Customer Engagement & Relationship Management 3. Market Expansion & Lead Generation 4. Project Coordination & Technical Support 5. Sales Reporting & Targets • Prepare regular sales performance and activity reports for management review. Qualifications Education & Experience Technical & Regulatory Knowledge • Ability to read and interpret engineering drawings and schematics. Sales & Communication Skills • Proven track record of meeting or exceeding sales targets in a technical capacity. Preferred Qualifications • Experience with CAD or other design software for product customization., • Industry certifications in safety or security., • Willingness to travel (up to 65%) for client visits and industry events., • Located in the Western US near major airport. If you have a passion for solving complex challenges and thrive in a consultative sales environment, we invite you to join our team as a Sales Engineer – SlowStop® Protective Guarding Systems. Your expertise will be instrumental in creating safer, secure workplace environments for our valued clients. Company DescriptionImpact Recovery was founded in 1991 in San Antonio, Texas, and has grown into a thriving international organization. Expanding beyond roadways, today we manufacture high-performance products that help protect people and property around the world.Impact Recovery was founded in 1991 in San Antonio, Texas, and has grown into a thriving international organization. Expanding beyond roadways, today we manufacture high-performance products that help protect people and property around the world.

Job Description PROJECT ENGINEER (Airport) - Phoenix, AZ ABOUT DIBBLE Founded in 1962, we provide a full range of civil engineering services to public and private sector clients across Arizona, Colorado, and the Southwestern United States. Our broad market expertise offers the ability to deliver complete engineering solutions from concept to closeout. Our business is built on honesty, ethics, accountability, quality, and service. Our people-focused culture is important, and we consider our employees to be our greatest asset. This culture is why we have so many long-term employees that have been with our firm between 15 and 35 years. Our employees enjoy an industry-leading benefits program, the ability to balance their home and work life, opportunities for growth and development, company activities, and various opportunities to give back through community service. SUMMARY: Dibble employs the industry's finest engineers, designers, and planners, providing expertise and valued resources for municipalities, private clients, federal, state, and local agencies. Dibble is looking for a skillful and highly motivated Project Engineer to join our Airport Development Team in our Phoenix, AZ location. This is an opportunity for you to join our fine group of respected professionals. Our employees enjoy our industry-leading benefits program, ability to balance their work life and home life, opportunities for development and growth, company events & activities, and the various opportunities to give back with our community activities. This dynamic individual will be responsible for engineering and leading design efforts for airside and landside airport infrastructure and development projects. ACCOUNTABILITIES: • Prepare construction plans, technical specifications, technical studies and reports., • Prepare quantity take-offs and/or calculations., • Direct CAD designers and less experienced staff in the preparation and production of construction plans., • Provide quality reviews of own work and work by designers in accordance with Company's quality control program and processes., • Assist in construction administration and inspection of projects, including the preparation of inspection reports, material quantity verification, and reviewing and responding to contractor material submittals, RFI's, and change order requests. Qualifications: • Knowledge and application of FAA Advisory Circulars for airport design and construction. Including but not limited to runways, taxiways, aircraft parking aprons, grading/drainage, and pavement markings., • Demonstrate strong technical knowledge of civil and/or airport/aviation engineering principles., • Demonstrate competence in the use and application of AutoCAD Civil 3D. Including but not limited to horizontal and vertical control/geometry, incorporation and interpretation of survey data, creating point files and surfaces, and creating plans and profiles., • Ability to mentor and train other CAD Designers and Engineers-in-Training., • Strong technical writing skills, and ability to convey engineering decisions and concepts to non-technical and technically based audiences., • Ability to work within a variety of team environments, including varying team sizes and personnel., • Prioritize and meet multiple deadlines. Education and Experience: • Must have a bachelor's degree in Civil Engineering, or a related field, from an accredited college., • Must be registered as a Professional Engineer (PE) in Arizona OR be able to obtain an Arizona PE license within 6 months of employment., • Minimum 4-8 years of engineering experience., • 3 years of aviation engineering experience preferred., • Minimum 3 years of increasing experience and application of AutoCAD Civil 3D. LOCATION: This opportunity is in our Phoenix, AZ office location READY TO JOIN OUR ENGINEERING TEAM? If you feel that you would be right for this position, please fill out our initial 3-minute, mobile-friendly application. We look forward to meeting you! Dibble is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. Job Posted by ApplicantPro

Job DescriptionDescription: Qualifications: • Ability to interpret customer drawings, work instructions, in-process control plans and understand GD&T., • Experience using CAD system Master Cam, Unigraphics, Espirit, SolidWorks or similar is acceptable but additional training may be required., • Experience programming CNC machines., • Ability to sequence process parts to achieve quality and meet financial objectives., • Strong trouble shooting ability with speeds and feeds, work holding, tool selection and machining approach., • Ability to work with QC for publication of in-process inspection plans. Duties & Expectations: • Operate CNC machine in a manner that is safe, producing quality product and meeting production expectations set forth by management. Mentor set up and operators, when applicable., • Program production parts using existing CAD models, utilizing Master Cam, Unigraphics, Esprit or other., • Save programs to network server for follow on orders following company procedure., • Design and create work holding fixtures, process and improve work instructions on routers., • Report any maintenance issues to Maintenance Manager or immediate supervisor., • Utilizing existing (new or repeat) programs, tools, fixtures, machine posts and set up parts for 1st piece approval., • Look for continuous improvement of processes and understand the contribution to the effectiveness of the QMS., • Work with QC to get first piece approved and in-process inspection plans in place., • Work with other programmers for any technical issues or trouble shooting when needed., • Train operators (1st and 2nd shift) to properly run production and document inspections, as required., • Document work on in-process inspection plans, production log, router and ERP system as applicable to maintain traceability and quality records., • Maintain FOD awareness and report any incidents to the department manager., • Communicate any concerns or issues related to production of parts, safety and quality to immediate supervisor for particular machine or project., • Have basic measuring tools: Caliper, Micrometer, Test Indicator and maintain within current calibration., • Only use calibrated measuring equipment whether personal or company supplied. If not in proper calibration notify quality department to have corrected immediately., • Handle all inspection equipment, machines and parts in a manner that will not damage or compromise integrity., • In the event of lack of work or another department needing assistance, may be asked to do any of the following but not limited to: CNC Set Up, Cleaning, Operator, Manual Machining, Tool Management, In-process inspection of ongoing production parts., • Maintain a positive attitude. Be team leader and team player. Keep clean and organized work area.

Job Description ENGINEER IN TRAINING (Structural) ABOUT DIBBLE Founded in 1962, we provide a full range of civil engineering services to public and private sector clients across Arizona, Colorado, and the Southwestern United States. Our broad market expertise offers the ability to deliver complete engineering solutions from concept to closeout. Our business is built on honesty, ethics, accountability, quality, and service. Our people-focused culture is important, and we consider our employees to be our greatest asset. This culture is why we have so many long-term employees that have been with our firm between 15 and 35 years. Our employees enjoy an industry-leading benefits program, the ability to balance their home and work life, opportunities for growth and development, company activities, and various opportunities to give back through community service. Dibble employs the industry's finest engineers, designers, and planners, providing expertise and valued resources for municipalities, private clients, federal, state, and local agencies. Dibble is looking for a skillful and highly motivated Engineer-In-Training to join our Structural team. This is an opportunity for you to join our fine group of respected professionals. SUMMARY: Dibble is seeking a highly motivated Structural Assistant Engineer to join our Structural Engineering practice in our Mesa or Phoenix, Arizona office. This versatile individual will be responsible for the preparation of detailed design drawings and construction documents, and special inspections, with a commitment to providing quality service to our clients. ACCOUNTABILITIES: • Prepare construction plans, technical specifications, technical studies, and reports., • Prepare quantity take-offs and/or calculations., • Direct CAD designers and staff in the preparation and production of construction plans., • Prepare construction documents under the direction of a Project Engineer or Project Manager., • Coordination of CAD files and design with internal and external team members., • Perform special structural inspections and construction observations during construction., • Tabulate and address client review comments from deliverables., • Utilize in-house methods of quality control to complete projects., • Incorporate applicable technical knowledge for added value to projects., • Strengthen technical knowledge through on-the-job, informal, and formal training., • Ensure appropriate reference material is utilized at all times., • Coordinate and organize project documentation., • Participate in monthly meetings and weekly project meetings., • Ensure all work is completed in conformance with company standards, policies, and procedures. MINIMUM REQUIREMENTS: • Demonstrate strong technical knowledge of structural engineering principles., • Demonstrate competence in the use and application of Risa3D, Risa-Foundation, Mathcad, Enercalc, and AutoCAD., • Proficient in Microsoft Office Suite (Word, Excel, Power Point)., • Strong technical writing skills, and ability to convey engineering decisions and concepts to non-technical and technically based audiences., • Ability to work within a variety of team environments, including varying team sizes and personnel., • Strong interpersonal, communication, analytical and problem-solving skills are essential., • Excellent attention to detail and directions., • Ability to work independently with minimal oversight. Education and Experience: • Must have a Bachelor's degree in Civil Engineering from an accredited university., • Must have an Engineer-In-Training (EIT) Certificate from the Arizona State Board of Technical Registration, or ability to obtain within 6 months of start date., • Must have a valid Arizona driver's license or be able to obtain a valid Arizona driver's license within 3 months of start date., • Prior civil engineering experience is preferred., • Prior experience working in CAD is preferred., • Experience with existing condition assessments and inspection of structures., • Experience with NBIS bridge inspections., • Experience with strengthening and repairing existing structures using Fiber Reinforced Polymers (FRP) a plus. LOCATION: This opportunity is in our Phoenix or Mesa office location COMPENSATION: Salary depends on level of skills and experience READY TO JOIN OUR ENGINEERING TEAM? If you feel that you would be right for this position, please fill out our initial 3-minute, mobile-friendly application. We look forward to meeting you! Dibble is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. Job Posted by ApplicantPro

Job Description CIVIL CAD DESIGNER- Utilities Exciting Growth Opportunity in Arizona! Dibble's Utilities teams in Phoenix and Mesa, AZ are expanding, and we're looking for a talented and driven Civil CAD Designer to join us. At Dibble, our employees benefit from a top-tier benefits program, a healthy work-life balance, ongoing professional development, engaging company events, and meaningful community involvement. We're seeking a candidate who thrives in a dynamic environment, can manage multiple high-impact projects simultaneously, and consistently delivers quality work. The ideal candidate will demonstrate sound decision-making that supports both project success and company goals. ACCOUNTABILITIES: • Perform design for engineering plans using AutoCAD Civil3D, • Communicate design approaches and decisions with associated supporting documentation to Project Engineers and Project Managers, • Tabulate and address review comments on deliverables provided by Client, Project Engineers or Project Managers, • Provide quality reviews of own work in accordance with Company's quality control program and processes, • Preparation of engineering drawings from sketches, field books, verbal description, and specifications, • Coordination of CAD files and design with internal and external team members Minimum Qualifications: • Prior AutoCAD and Civil 3D experience, • Experience in design of water and wastewater system preferred, • Excellent oral and written communication skills, • Ability to work independently and self-motivated, • Ability to prepare construction documents using good design judgement and meeting agency design guidelines, • Ability to work in a fast paced and ever-changing environment on multiple projects simultaneously and must be a team player, • Associates Degree in drafting or similar education preferred, • A minimum of 2 years of experience as a CAD Designer required LOCATION: This opportunity is in our Phoenix or Mesa, AZ office locations COMPENSATION: Compensation is based on the successful candidate's individual education, qualifications, and experience. ABOUT DIBBLE Founded in 1962, we provide a full range of multi-disciplinary services to public and private sector clients across Arizona, Colorado, and the Southwestern United States. Our broad market expertise offers the ability to deliver complete engineering, planning, and surveying solutions from concept to closeout. Our business is built on honesty, ethics, accountability, quality, and service and our sense of purpose drives our commitment to serve our employees, clients, partners, and communities. Every day, our team of professionals collaborate, develop, and produce great results. They are the reason we get things done so we know how essential they are. For our amazing team, we offer great benefits as well as ensure a positive and uplifting company culture in which our employees can continue to learn, grow, and perform to their highest potential. READY TO JOIN OUR TEAM? If you feel that you would be right for this opportunity, please fill out our initial 3-minute, mobile-friendly application. We look forward to meeting you! Dibble is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. Job Posted by ApplicantPro

Job Description Job Title: Structural Engineer – Modular Steel Systems Location: Phoenix, AZ or Buffalo, NY Department: Engineering Reports To: Director of Engineering Employment Type: Full-Time | On-Site About GTI GTI is a rapidly growing manufacturer of mission-critical modular infrastructure, delivering high-quality steel-based structures for the energy, defense, and heavy industrial markets. With engineering and fabrication facilities in both Phoenix and Buffalo, GTI specializes in custom modular enclosures, containerized systems, and large-scale steel assemblies designed for deployment in extreme environments. Position Overview We are seeking a highly skilled Structural Engineer to join our engineering team and drive the design, analysis, and validation of modular steel structures. While experience in bridge or suspended structure design is highly valued, the core focus of this role is on modular fabrication, large welded assemblies, and containerized structures used in high-load industrial environments. This role requires a hands-on engineer who can translate concepts into production-ready designs, work closely with fabrication teams, and ensure structural integrity, safety, and code compliance. Key Responsibilities • Structural Design & Analysis, • Design modular steel structures, large welded assemblies, platforms, frames, and load-bearing systems for containerized and enclosure-based applications., • Perform structural analysis using FEA software and hand calculations to evaluate static and dynamic loads, fatigue, seismic, and wind loading., • Incorporate bridge engineering principles when applicable to long-span or suspended modular systems., • Engineering Documentation, • Develop engineering drawings, design reports, and complete technical documentation using SolidWorks, AutoCAD, and Revit/BIM tools., • Produce accurate bills of materials (BOMs), weld symbols, and fabrication-ready drawings., • Manufacturing Collaboration, • Partner with fabrication, quality, and project teams to ensure structural designs are optimized for manufacturability, cost efficiency, and internal capability., • Support shop drawing reviews, first article builds, and QA/QC testing for structural validation., • Field & Deployment Support, • Conduct site assessments, participate in installation support, and perform structural evaluations of deployed modular systems., • Compliance & Standards, • Ensure all designs comply with applicable structural codes and standards, including IBC, AISC, AWS D1.1, and applicable state regulations., • Bachelor’s degree in Civil, Structural, or Mechanical Engineering (Master’s preferred), • 5+ years of experience in structural design for steel structures, welded assemblies, or modular systems, • Proficiency with FEA tools (RISA, SAP2000, STAAD.Pro, or similar), • Experience with CAD platforms including SolidWorks and AutoCAD; familiarity with Revit or BIM tools preferred, • Strong understanding of structural design principles, welding/joint design, corrosion protection, and load path analysis, • Knowledge of relevant building codes and standards (IBC, AISC, AWS D1.1), • PE licensure or the ability to obtain within 12 months, • Experience in modular construction, container-based fabrication, or bridge design, • Familiarity with design-for-manufacturing principles and fabrication workflows, • Experience collaborating directly with manufacturing and field installation teams, • Shape the future of modular steel infrastructure and energy systems, • Competitive salary and comprehensive benefits package, • Collaborate across disciplines in a fast-paced, hands-on environment

Job Description United Integrated Services (USA) Corp. was founded in Phoenix, Arizona in 2020. UIS is a U.S. subsidiary of United Integrated Services Co., Ltd. (UIS Taiwan) which was founded in Taiwan in 1982. UIS is a multidisciplinary engineering and construction company. We provide fully integrated design-build services to our clients in the high-technology industry for their manufacturing facility needs. Our scope of services includes engineering design, high-tech factory planning, and on-time equipment and material delivery in which clean-room systems, HVAC, electrical systems, and tool hook-up, are all vital parts in need of total coordination. Summary: We are searching for a skilled and dedicated Mechanical Engineer to join our team. The successful candidate will be responsible for designing, implementing, and maintaining air filtration systems in a cleanroom environment, ensuring compliance with semiconductor production regulations and standards. Experience in HVAC is highly desired. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Perform requirements classification of clients, communicating project requirements and design review with internal & external design team for Air Abatement System (AAS), such as, process exhaust duct, scrubber for waste air treatment, and dosing chemical., • Perform the required scope of work and clarify specification with stakeholders., • Assist procurement team on the procurement of AAS systems equipment & materials' and assist in contractors' awards., • Understand isometrics, P&ID and CAD drawings specifically for AAS systems., • Review, approve and oversee the installation of AAS systems., • Inspect work in progress to ensure that workmanship conforms with specifications and assure adherence to construction schedules., • Review progress reports, materials used and costs, contract payment application, and adjust work schedules as indicated by the reports., • Review & reply RFI (Request for information) and change orders., • Provide daily, weekly, and monthly reports for internal use and client communication., • Identify and solve problems., • Scheduling and schedule execution., • Understand drawing, and review specifications and estimation., • Other responsibilities as assigned. Qualifications: The requirements listed below are representative of the knowledge, skill, and/or ability required. Education/Experience: • Bachelor's degree in Mechanical Engineering, Construction Management, or a related field., • 0-5 years of work experience related to Mechanical HVAC. Direct AAS systems planning and/or construction experience preferred. Skills and Competencies: • Strong understanding of process exhaust duct sizing & layout, mechanism of scrubber for waste air treatment., • Proficiency in Microsoft Office Suite products (Word, PowerPoint, Excel, Outlook, Teams)., • Ability to use engineering software, such as AutoCAD, Revit, Navisworks, Primavera, or others., • Excellent organizational and time management skills., • High level of attention to detail, and highly organized., • Ability to act with integrity, professionalism, and confidentiality., • Ability to effectively prioritize responsibilities depending on project needs. Ability to effectively present information and respond to questions from groups of managers, and employees., • Ability to develop and maintain successful relationships with all levels of employees, clients, and subcontractors., • Must be able to work under pressure and meet deadlines while maintaining a professional attitude., • Effective English verbal and written communication skills required., • Ability to communicate in Mandarin/Taiwanese is a plus., • Ability to effectively present information and respond to questions from groups of managers, customers, and employees., • Read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Write routine reports and correspondence. Nice to have: • Start-up experience., • Verbal communication skills in Mandarin., • Professional Engineer license. Additional Requirements: This position requires the ability to lift and carry up to 50 lbs for transporting documents, equipment, and other materials as needed. The role involves extended periods standing, walking and/or of sitting while working at a computer. Frequent movement between the construction trailer and various areas of the construction site is necessary. The position is based at the construction job site (trailer office). Even though the exposure of hazardous work conditions would be minimal, the employee may be required to visit the work area of the jobsite and thus be exposed to some typical work hazards that may be present on a construction site, such as dust, moving machineries, weather, caustic chemicals, noise etc. UIS would provide the required safety protection to ensure the safety of UIS employees and comply with all OSHA standards. Equal Employment Opportunity: UIS is an Equal Opportunity Employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, veteran status. Or any other characteristic protected by federal, state, or local law. We believe in fostering a diverse and inclusive workplace where all individuals are treated with respect and dignity. Disclaimer: The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties as assigned by their supervisor.

Job Description Position: Facilities Architecture Engineer Location: Tempe, AZ (transitioning to Peoria, AZ) Industry: Advanced Manufacturing Overview: An industry leader in advanced manufacturing is seeking a Facilities Architecture Engineer to support the design, construction, and maintenance of a new advanced manufacturing facility. This role requires expertise in civil, structural, and architectural engineering as well as knowledge of cleanroom standards and building code compliance. Key Responsibilities: * Oversee construction schedules, safety, and compliance for facility development projects. * Develop and manage maintenance plans, budgets, and vendor estimates for operational buildings. * Ensure legal and regulatory compliance for building layout changes and renovations. * Plan and execute cleanroom construction/renovation projects while maintaining operational continuity. * Assess structural aspects like floor load capacity and vibration requirements for equipment installations. * Implement mitigation plans for noise, dust, and odors during construction. Required Qualifications: * Bachelor’s or Associate’s Degree in Engineering (with additional experience). * 5+ years in construction projects; 3+ years in design management. * Strong knowledge of industry codes, safety regulations, and cleanroom infrastructure. * Proficient in CAD; able to assess and implement building layout changes. Preferred: * Experience in the semiconductor or advanced manufacturing industry. * Familiarity with cleanroom utilities, energy-saving initiatives, and facility optimization. Work Environment: Initial work in Tempe; role transitions to onsite at Peoria facility. Occasional remote flexibility. Must be able to access confined spaces, elevated areas, and tolerate industrial environments.

Job Description United Integrated Services (USA) Corp. was founded in Phoenix, Arizona in 2020. UIS is a U.S. subsidiary of United Integrated Services Co., Ltd. (UIS Taiwan) which was founded in Taiwan in 1982. UIS is a multidisciplinary engineering and construction company. We provide fully integrated design-build services to our clients in the high-technology industry for their manufacturing facility needs. Our scope of services includes engineering design, high-tech factory planning, and on-time equipment and material delivery in which clean-room systems, HVAC, electrical systems, and tool hook-up, are all vital parts in need of total coordination. Summary: We are searching for an Associate Electrical Engineer to join our team. The successful candidate will be responsible for designing, implementing, and maintaining electrical systems in a cleanroom environment, ensuring compliance with semiconductor production regulations and standards. Experience in electrical construction is highly desired. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Perform requirements classification of clients, communicating project requirements and design review with internal & external design team for Electrical system., • Perform the required scope of work and clarify specification with stakeholders., • Assist procurement team on electrical systems equipment & materials' and assist in contractors' awards., • Understand isometrics, P&ID and CAD drawings specifically for electrical systems., • Review, approve and oversee the installation of electrical systems., • Inspect work in progress to ensure that workmanship conforms with specifications and assure adherence to construction schedules., • Review progress reports, materials used and costs, contract payment application, and adjust work schedules as indicated by the reports., • Review & reply RFI (Request for information) and change orders., • Provide daily, weekly, and monthly reports for internal use and client communication., • Identify and solve problems., • Scheduling and schedule execution., • Understand drawing and review specifications and estimation., • Other responsibilities as assigned. Qualifications: The requirements listed below are representative of the knowledge, skill, and/or ability required. Education/Experience: • Bachelor's degree in electrical engineering, Construction Management, or a related field., • 0-3 years of experience Electrical system planning., • Construction experience preferred. Semiconductor construction, a plus. Skills and Competencies: • Strong understanding of high and low voltage power, lighting sockets, fire protection power, broadcasting, weak current, refuse direction indicator, grounding lightening protection system., • Proficiency in Microsoft Office Suite products (Word, PowerPoint, Excel, Outlook, Teams)., • Ability to use engineering software, such as AutoCAD, Primavera, or others., • Excellent organizational and time management skills., • High level of attention to detail, and highly organized., • Ability to act with integrity, professionalism, and confidentiality., • Ability to effectively prioritize responsibilities depending on project needs. Ability to effectively present information and respond to questions from groups of managers, and employees., • Ability to develop and maintain successful relationships with all levels of employees, clients, and subcontractors., • Must be able to work under pressure and meet deadlines while maintaining a professional attitude., • Effective English verbal and written communication skills required., • Ability to communicate in Mandarin/Taiwanese is a plus., • Ability to effectively present information and respond to questions from groups of managers, customers, and employees., • Read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Write routine reports and correspondence. Nice to have: • Start-up experience., • Verbal communication skills in Mandarin., • Professional Engineer license. Additional Requirements: This position requires the ability to lift and carry up to 50 lbs for transporting documents, equipment, and other materials as needed. The role involves extended periods standing, walking and/or of sitting while working at a computer. Frequent movement between the construction trailer and various areas of the construction site is necessary. The position is based at the construction job site (trailer office). Even though the exposure of hazardous work conditions would be minimal, the employee may be required to visit the work area of the jobsite and thus be exposed to some typical work hazards that may be present on a construction site, such as dust, moving machineries, weather, caustic chemicals, noise etc. UIS would provide the required safety protection to ensure the safety of UIS employees and comply with all OSHA standards. Equal Employment Opportunity: UIS is an Equal Opportunity Employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, veteran status. Or any other characteristic protected by federal, state, or local law. We believe in fostering a diverse and inclusive workplace where all individuals are treated with respect and dignity. Disclaimer: The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties as assigned by their supervisor.

Job Description Summary: ProperSys Corporation is a newly established U.S. subsidiary of Taiwan Puritic Corp which was founded in 1996. The company serves the constantly innovating semiconductor industry with high precision equipment, systems, and services. We deliver professional facility turnkey projects and system engineering services to the semiconductor fabrication industry. Semiconductor leaders choose us to participate their evolution and expansion because of our focus on high quality production and clean execution. ProperSys also specializes in providing the services for procurement and sales of consumable supplies and raw materials for hi-tech OEM/ODM semiconductor equipment. ProperSys Corporation is rapidly growing and expanding and is now looking for talented members to join our team. We are looking for two new BIM (business information modeling) modelers. Expert knowledge of BIM and Autodesk Revit software is required, as well as an understanding of engineering and architecture. You will be required to work closely with our lead engineer, modeling and presenting the concepts requested by these team members. The ideal candidate has previous experience in this field as well as good communication ability. Ability to communicate in Mandarin/Taiwanese is a plus. Essential Duties and Responsibilities: • Collaborate with architects and engineers on projects, • Responsible for proper set up and maintenance and management of large, federated building models involving 8-10 design and engineering disciplines or more, • Develop and maintain project templates, tool sets, families and libraries, • Provide training, support, and develop BIM standards and protocols, while ensuring data accuracy and consistency, • Be the point of contact for any technical issues related to Revit and continuously monitor and evaluate its use to identify areas for improvement, • Timely implementation of clash resolution of any issues, and data integrations for other disciplines according to an aggressive schedule, • Ensure the appropriate use of quality control standard and procedures for accurate and precise BIM Revit/AutoCAD work, measurements, documentation, analysis, and portrayal of incoming and existent data, • Responsible for the coordination of the design produced by the Engineering Team, Trade Contractors, and other third-party vendors under their direction, • Hand off the completed model/as-built to their facilities counterpart, • Determine the proper elements and scale for MEP systems and buildings, • Ensure integrity/quality of the models, • Ability to meet deadlines To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience: • Proficiency in CAD drafting (Autodesk products preferred) and detailing for mechanical and process piping systems in commercial and industrial construction projects, • Demonstrated experience leading and managing teams of piping detailers/designers and scheduling of tasks, • Process piping detailing experience, • High-tech tools install knowledge, • Familiarity with commercial plumbing systems, • Demonstrated experience in AutoCAD, 3D Modeling and Navisworks software, • Ability to identify design issues and provide virtual simulations in 3D, • 8+ years of experience, preferably in a fast-paced work environment, • Experience in a construction environment or similar industrial setting Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. Ability to communicate in Mandarin/Taiwanese a plus. Computer Skills: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to sit. The employee is frequently required to walk. The employee is occasionally required to stand; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. The employee must regularly lift and /or move up to 10 pounds, frequently lift and/or move up to 25 pounds. Specific vision abilities required by this job include Close vision, Distance vision, Peripheral vision, Depth perception and Ability to adjust focus. The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor. Job Type: Full-time Benefits: • 401(k), • Health insurance (100% covered by the company), • Dental (100% covered by the company), • Vision (100% covered by the company), • Paid time off, • Paid Holidays Schedule: 8-hour shift

Job Description If being a part of a world-class organization that operates in some of the most advanced technological environments around the world sounds like a dream job, Network Connex might be the right fit for you! You’ll be part of a team working together to solve customer problems every day, with compensation and benefits that are an investment in your career, financial future, and overall well-being. In addition to competitive base pay, Network Connex offers a comprehensive benefits package designed to support your physical, mental, and financial health you can begin participating in our programs on the first of the month following your start date. Join our Vanguard 401(k) plan, with immediate vesting and a generous company match to help you build long-term financial security. Our team also enjoys 10 paid company holidays, a generous PTO accrual schedule, and access to discounts on useful products and services. The Lead Estimator will work within Network Connex’s Data Center Services group and will be responsible for planning, preparing and completing cost budgets, estimates and bid package submittal documents for assigned opportunities under the guidance and direction of the group’s Estimating Manager. This position may be assigned estimating support resources as required and will be responsible for leading and overseeing the team during the development of the estimate and response package, ensuring completeness, accuracy and timely delivery. Job Duties and Responsibilities: • Safety is the main fiber of our network. Follow Safe work practices that conform to the Company’s Safety program and customer site policies and procedures., • Review full bid package - specifications, drawings, and any other provided documentation, and attend pre-bid meetings to determine scope of work and required contents of estimate., • Prepare and develop quantity take-offs, cost budgets and estimates from start to response package delivery., • Identify elements of the project that may be key to making a competitive estimate., • Evaluate and identify areas for potential value engineering opportunities., • Provide leadership to assigned estimating personnel / resources supporting the development of large RFPs., • Ensure all working documents and data are filed, stored and maintained to back-up estimate., • Develop installation unit costs and rates identifying labor productivity targets for included work items based on projected site conditions and historical data., • Prepare detailed listing of materials, equipment, and other items needed for developing a complete bid and work with suppliers and vendors on obtaining quoted pricing and availability., • Review potential subcontract trade partner quotes and proposals for completeness and conformance with plans, specifications and other bid-package documentation., • Assist in drafting proposal letters and other items that may be required for a complete response package., • Prior to the delivery of the formal bid package, coordinate and provide a detailed read-out / review of work scope, technical requirements, pricing and any other information to the Estimating Manager, Delivery and other internal Leadership., • Experienced in reading, understanding and interpreting complex and detailed, design drawings and specifications., • Able to understand and perform industry aligned arithmetic and formulas that are required for developing cost estimates., • Ability to mentor and assist with the development of other lesser experienced teammates., • Identify and meet customers’ needs, expectations, and requirements., • Proficient in the use of a computer, Microsoft Office business applications (Word, Excel, PowerPoint, etc.) and industry specific platforms (Bluebeam, Procore, AutoDesk, etc.)., • Familiarity with modern estimating software and applications., • Experience in use of CAD, Revit or other 3D modeling software or viewers is a plus., • Ability to work under time constraints and adapting to changing priorities with a positive attitude is essential., • Excellent communication skills as required for the position., • Possess an entrepreneurial spirit with a high level of motivation. Can work as part of a Team and independently with minimal oversight., • Bachelor’s Degree Construction Management, Engineering or other related discipline., • Minimum 5 years of experience developing estimates and bid-packages for large scale complex Structured Cabling and Low Voltage System projects. Other relevant experience may be considered, • Experience in developing detailed and accurate cost budgets and estimates for Data Center Structured Cabling Systems is HIGHLY preferred., • Experience in developing cost estimates for projects utilizing various contracting methods such as Lump Sum / Fixed Price, Guaranteed Maximum Price (GMP), Unit Price / Rate, Design Build, etc., • Preferred professional certifications:, • BICSI Registered Communications Distribution Designer (RCDD), • BICSI Registered Telecommunications Project Manager (RTPM), • AASPE Certified Professional Estimator (CPE) This position will have direct reports. Work Location and Travel: Remote / Hybrid with up to 20% travel Note: This job description outlines the general nature of the responsibilities and duties executed by this position. Other responsibilities and duties may be assigned as needed or required. EEOC-Minority/Female/Disability/Veteran Network Connex believes all persons are entitled to equal employment opportunities and does not discriminate against employees or job applicants because of race, color, gender, affectional or sexual orientation, domestic partnership status, ancestry, religion, national origin, citizenship status, marital status, disability, veteran status, age or any other protected group status. Upon acceptance of an offer, all candidates will be required to pass a background check and drug screening.

Job Description Job Title: Mechanical Engineer Location: Goodyear, Arizona Department: Engineering Reports To: Manager of Mechanical Engineering Employment Type: Full-Time | On-Site About GTI Fabrication GTI Fabrication is a leading manufacturer of modular metal enclosures and engineered structures for industries including defense, energy, and infrastructure. Our products are designed and fabricated with a focus on durability, performance, and customization—making us a go-to solution for mission-critical applications. Position Summary GTI Fabrication is seeking a Mechanical Design Engineer to support the development of prefabricated steel enclosures and modular systems. This role involves using SolidWorks and AutoCAD daily to create technical drawings, perform analysis, and collaborate with engineers and production teams to bring engineered-to-order solutions to life. Key Responsibilities • Develop detailed 2D and 3D mechanical design drawings using SolidWorks and AutoCAD., • Perform CFD (Computational Fluid Dynamics) and thermal analysis on container-based HVAC systems., • Conduct FEA (Finite Element Analysis) on steel weldment structures and custom metal assemblies., • Interpret engineer markups to modify technical schematics and construction documents., • Collaborate with cross-functional teams to ensure manufacturability and adherence to specifications., • Apply knowledge of ISO container construction, sheet metal, and modular fabrication methods., • Support project deliverables on time, ensuring quality and accuracy., • Uphold punctuality and maintain compliance with GTI safety standards. Required Qualifications • Associate degree or equivalent from a technical school or vocational program., • 7+ years of experience in mechanical design or drafting., • Proficiency in SolidWorks, AutoCAD, and familiarity with BIM platforms., • Experience with sheet metal, weldments, and metal framing., • Strong analytical, communication, and documentation skills., • Competency in Microsoft Office tools (Excel, Word, Outlook)., • Familiarity with modular or prefabricated construction methods., • Ability to work independently and as part of a fast-paced engineering team. Preferred Qualifications • Bachelor’s degree in Mechanical Engineering., • Experience with design for manufacturing (DFM) principles., • Exposure to containerized systems or heavy-gauge metal fabrication. Work Environment • Office-based with occasional travel to production floor and project sites (up to 10%)., • Daily tasks require extended periods at a desk using CAD software., • May need to walk through an active warehouse with heavy machinery and equipment (PPE required).

Job DescriptionOverview: A leading precision manufacturer in the AV, production, and staging sectors is seeking a Technical Sales Specialist to join their growing team. This is a full-time, onsite role that plays a vital part in the bridge between sales and production - supporting customer engagements, translating technical specifications, and enabling the seamless execution of custom-manufactured projects. The company has built a reputation for high-quality, custom-engineered products and is deeply integrated into live events, entertainment, and touring industries. This role offers a dynamic and fast-paced environment, ideal for someone with both technical acumen and strong commercial instincts. The Role: As Technical Sales Specialist, you'll be responsible for supporting the front-end sales process by interpreting technical requirements, producing precise cost estimates, and managing project information across internal systems. You’ll collaborate closely with engineering, production, and shipping teams to ensure quotes align with manufacturing capabilities and timelines. Reporting to the Operations Manager (or equivalent), your success in this role will hinge on your ability to blend technical understanding with effective communication and meticulous execution. Responsibilities: * Interpret client specifications—written, verbal, or technical drawings and translate them into structured product quotes. * Produce accurate quotes based on materials, labour, engineering constraints, and BOMs. * Configure assemblies and components in the ERP system to reflect up-to-date capabilities and pricing. * Act as the main technical liaison for clients, managing change requests, clarifications, and quote follow-ups. * Collaborate with production teams to align quoting expectations with manufacturing timelines and resources. * Manage technical documentation, including job packets, instructions, and shipping details. * Support logistics and freight quoting, ensuring seamless alignment between customer needs and shipping realities. Requirements: * 2+ years in a technical sales, quoting, or estimating role within a manufacturing or engineering setting. * Ability to read and interpret CAD drawings (SolidWorks or similar). * Experience working with ERP systems (FULCRUM is a strong plus). * High proficiency with Excel, particularly in costing and nested BOMs. * Solid understanding of manufacturing workflows, tolerances, and materials. * Strong attention to detail and excellent written and verbal communication skills. * Must be comfortable operating in a production-integrated environment and managing competing priorities. Nice to Have: * Background in custom fabrication or project-based manufacturing. * Experience building or managing cost/pricing templates for configurable products. Salary: $90,000 - $105,000, commensurate with experience. Location: Phoenix, Arizona Onsite; must be based near the company’s manufacturing facility Benefits: Standard benefits package offered, with additional perks discussed during the interview stage.

Job Description Opportunities exist to join our Engineering team for an exciting 2026 summer internship supporting our Hard Goods Product Development team, responsible for the innovation, design, manufacturing, and testing of all clubs that bear the PING name! Here at PING, we pride ourselves on creating memorable internships where students get a true taste for what real-world engineering looks like within a fast-paced, rigorous, and exciting atmosphere. As an intern, you will be given meaningful projects that have a tangible impact on our goal of helping customers play their best. These projects can include designing components in CAD, building mathematical models and running simulations, designing and fabricating test equipment, and analyzing test data to assist with problem-solving. We are specifically looking for interns who are majoring in Engineering or Science disciplines as our positions require strong knowledge of math and physics fundamentals in addition to excellent problem solving capabilities. Additional information: • A minimum of 2 years of college coursework must be completed by the time you begin your internship, • You must be willing to dedicate at least 8 weeks (40 hours per week) to the internship, • These internships require you to be onsite in Phoenix, Arizona, • To be considered for these internships, applicants MUST submit a cover letter explaining what you hope to gain out of your internship. Applicants will be placed into the group we believe they will thrive most in supporting based on their unique skills and interests. *PlNG is a nicotine free company. Only non-nicotine users should apply. *No sponsorship is available for this position.

Job Description Job Title: Manufacturing Engineer Company: Custom Control Sensors, LLC Location: Phoenix, AZ Employee Type: Full Time – Exempt Industry: Manufacturing Job Type: Assembly Manufacturing Engineering Required Education: Bachelor of Science Degree or equivalent, in mechanical or manufacturing engineering. Master's preferred for Senior role. Required Experience: Level 1 - A related technical field with 0-2 years of related experience. Lean / Six Sigma certification desired. Must be computer proficient Level 2 - A related technical field with 2-5 years of related experience. Lean / Six Sigma certification desired. Must be computer proficient Senior - A related technical field with 5-10+ years of related experience. Lean / Six Sigma certification desired. Summary of Focus: Level 1 - Supporting processes, documentation, basic troubleshooting Level 2 - Process ownership, improvement, DFM, RCA Senior - Strategy, NPI, compliance, mentorship Key Technical Areas: Level 1 - Soldering, leak testing, pressure calibration basics Level 2 - PFMEA, SPC, signal integrity, fixture design Senior - Automation, compliance leadership, complex root cause Company Overview Custom Control Sensors, LLC (CCS) is a global leader in the design, development, manufacturing and supply of pressure, temperature and liquid flow switches and sensors for the Aerospace, Defense and Industrial markets. Since 1957, CCS has been providing high reliability electro-mechanical devices that utilize the "DUAL-SNAP" action disc spring principle pioneered by Custom Control Sensors. CCS’ Airborne Division provides standard and custom switches, sensors and transducers to the aerospace, defense, commercial aviation and government markets. CCS also supplies original PMA parts for various Boeing, Airbus and business aviation aircraft. CCS’ Industrial Division provides pressure and temperature switches, sensors and transmitters for process control of global oil & gas, petro-chemical, power generation, steel manufacturing, tire manufacturing, automotive, medical and various other industrial equipment. CCS is an ISO 9001and AS 9100 certified company. Industrial Product certifications include UL, CSA, ATEX, GOST, CCC and IECEx. CCS is a growth-orientated company focused on building an energetic and vibrant work environment. We work to foster the interaction and collaboration between all associates at CCS, the connection with our customers and the opportunity for creativity. CCS is an established company with global resources offering individual opportunities to affect positive change. One person can make a great impact on our company’s success. Benefits: • Medical, • Dental, • 401k with Match, • Employer funded Life Insurance, Short-term Disability, and Long-term Disability, • Paid Sick and Vacation Leave, • Level 1 - Assist in supporting production and process improvements for aerospace-grade pressure switches and transducers. Gain hands-on experience with precision assembly, calibration, and inspection processes under the guidance of senior engineers., • Level 2 - Own and optimize manufacturing processes for aerospace pressure switches and transducers. Improve yields, throughput, and quality through data-driven analysis and process refinement. Support new designs through development to production. Level 1 • Support day-to-day manufacturing of pressure sensors, switches, and assemblies., • Assist with documentation of assembly procedures, calibration steps, and inspection protocols., • Help troubleshoot basic production issues, focusing on wiring, sensor alignment, and leak testing., • Collect and analyze simple manufacturing data (e.g., yields, rework rates)., • Assist with implementation of lean improvements in work cells., • Learn industry standards (AS9100, IPC-A-610, etc.) and support compliance., • Develop and optimize assembly and calibration processes for electro-mechanical pressure sensors., • Analyze failure data and lead root cause investigations (e.g., electrical drift, seal leaks, calibration drift)., • Implement process controls (PFMEAs, control plans, work instructions)., • Support NPIs and design-for-manufacturability (DFM) efforts for custom transducer designs., • Collaborate with quality engineering on nonconformance investigations and corrective actions., • Evaluate tooling and test fixture needs and manage change control documentation., • Ensure compliance with AS9100, FAA, and NADCAP standards as applicable., • Lead new product introduction (NPI) for complex pressure sensing and switching devices, from prototype through production ramp., • Develop robust, repeatable processes for soldering, calibration, testing, and potting., • Responsible for creating Assembly and Manufacturing Travelers and Standard Work Instructions;, • Maintain accurate documentation of processes, manufacturing procedures, material records, design concepts, tool/fixture drawings and shop orders in coordination with Engineering, Quality Assurance and R & D functions, • Design or oversee creation of custom tooling, test stands, and automated calibration fixtures., • Drive cost reduction, yield improvement, and reliability enhancements., • Collaborate with design, quality, and test engineering to ensure manufacturability and compliance., • Lead internal audits, support external regulatory audits (FAA, customers), and maintain AS9100 documentation., • Mentor junior engineers and provide technical leadership across manufacturing and test teams., • Due to need to maintain ITAR compliance, applicants must be U.S. citizen or legal permanent resident., • Bachelor of Science Degree or equivalent, in mechanical or manufacturing engineering. Master's preferred for Senior role., • Must be Continuous improvement focused, • Team oriented and possesses flexibility and adaptability, • Ability to read, write, and follow written and verbal instruction in English, • Ability to work well with only a modest amount of instructions & directions, • Ability to sit for prolonged periods in front of a computer as necessary, • Exposure to electronics, precision assembly, or sensor technology is a plus., • Familiar with pneumatics, pneumatic gages and production high pressure lines & pneumatic test boxes and manufacturing tools for assembly is a plus, • Familiarity with CAD and basic data analysis (Excel, Minitab)., • Detail-oriented, with a desire to learn aerospace manufacturing standards and processes., • Familiarity with lean manufacturing methodologies, 6 S, Six Sigma tools, RCCA, PFMEA, DFM, and Kaizen events, • Familiarity with SolidWorks or a similar high-end CAD software, and good working knowledge of GD&T as per ASME Y14.5 is a plus, • 2–5 years of experience with electro-mechanical assembly, sensor calibration, or aerospace components., • Familiarity with leak testing, signal conditioning, and pressure calibration equipment., • Proficiency in root cause analysis and lean manufacturing tools., • Experience with ERP/MRP systems and controlled documentation processes., • Knowledge of lean manufacturing methodologies, Six Sigma tools, RCCA, PFMEA, DFM, and Kaizen events, • Support company goals, objectives, policies, procedures, good manufacturing practices, and regulations, • Experienced in pneumatics, pneumatic gages and production high pressure lines & pneumatic test boxes and manufacturing tools for assembly., • Experienced in installation and/or removal of production line equipment, • Experienced in designing/Updating new production tools to replace old and obsolete ones in production, • 5–10+ years in aerospace manufacturing of sensors, transducers, or similar precision electromechanical products., • Expert knowledge of pressure calibration, leak testing, electronics assembly, and sensor physics., • Strong understanding of aerospace regulatory requirements (AS9100, FAA PMA/TSO, IPC standards)., • Proficiency with ERP systems, statistical tools (Minitab, JMP), and quality documentation systems., • Proficiency with SolidWorks or a similar high-end CAD software, and good working knowledge of GD&T as per ASME Y14.5, • Knowledge of lean manufacturing methodologies, Six Sigma tools, RCCA, PFMEA, DFM, and Kaizen events, • Support company goals, objectives, policies, procedures, good manufacturing practices, and regulations, • Experienced in training employees on methods, tooling, and procedures for product assembly or fabrication, • Experienced in pneumatics, pneumatic gages and production high pressure lines & pneumatic test boxes and manufacturing tools for assembly., • Experienced in installation and/or removal of production line equipment, • Experienced in designing/Updating new production tools to replace old and obsolete ones in production, • Experienced in 6S concept and able to train & implement the concept on the production stations and tool cabinets storages Physical Requirements: The physical demand described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to sit, talk or hear, flex/extend fingers with opposition of thumb; palmar grasp. The employee is frequently required to stand, walk, bend, and reach with hands and arms and to move within all areas of the facilities and parking lots. The employee is occasionally required to bend, turn push, pull and kneel. A computer is used to access, input and retrieve data. The employee must occasionally lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, color vision, depth perception and the ability to adjust and focus. EEO M/F/D/V Custom Control Sensors, LLC. is an Equal Opportunity employer. All qualified applicants for employment shall receive fair and equal treatment regardless of their race (including hair texture and protective hairstyles, such as braids, locks, and twists), color, religion, creed, sex/gender, marital or registered domestic partnership status, age, national origin or ancestry, citizenship, pregnancy, childbirth, breastfeeding or related medical conditions, mental or physical disability (including HIV and AIDS), medical condition including genetic information or characteristics (including those of family members), sexual orientation, veteran or military status, gender identity, gender expression, transgender status or any other basis protected by federal, state or local law, ordinance or regulation. The policy not to discriminate includes, but is not limited to, advertising for positions, recruiting, hiring, placement, promotion, transfer, rates of pay, discipline and termination.

Job Description Now Hiring: Dental Lab Technician | Join Our Growing Team! Are you a skilled and detail-oriented Dental Lab Technician looking for your next opportunity? We're seeking a passionate individual to join our state-of-the-art dental lab where craftsmanship, technology, and patient care come together. Location: Ahwatukee/Phoenix, 85044 Schedule: 4 days/week Compensation: Competitive pay based on experience + benefits Responsibilities Include: * Working with patients chairside to do impression, wax rim bite, teeth try in, and assist in delivery, including but not limited to dentures, partials, and snap on implant dentures. * Working with materials such as zirconia, porcelain, acrylic, and metal * Utilizing digital design software (CAD/CAM) and manual tools * Collaborating with dentists and team members to ensure optimal fit and aesthetics * Maintaining high quality standards and attention to detail * Fabricating dental prosthetics including crowns, bridges, dentures, and implants Qualifications: * Previous dental lab experience (minimum 1 year ), ideally use to be a dental assistant * Knowledge of dental anatomy, materials, and fabrication techniques * Experience with [3Shape, Exocad, or other relevant software] is a plus * Strong hand-eye coordination and artistic sense * Reliable, organized, and team-oriented Why Work With Us? * Modern lab equipped with the latest technology * Supportive and collaborative team environment * Opportunities for continuing education and professional growth * Stability and long-term career potential Apply Today! Send your resume and (if available) portfolio or work samples to . We look forward to meeting the next great addition to our team!

Job Description Entellus is more than just your typical civil engineering, land surveying, and construction services firm. We’re on a mission to build a different kind of engineering company. A place where people are excited to come to work and feel a sense of community. An organization that adapts to the changing needs of our clients and delivers constant quality with fierce integrity. And a happy culture that brings the best minds together to improve the world around us. This is what we call The Entellus Way. Entellus, Inc. is seeking a Senior Designer/EIT/PE to join our Land Development team in Phoenix, Arizona. Entellus currently has many exciting projects underway, and we are looking for a full-time Senior Designer/EIT/PE with strong technical ability, good communication skills, and enthusiasm to join our growing team. This position will require you to work with other engineers, project managers, and technical staff to produce design plans, specifications, reports, and cost estimates for projects including residential subdivisions, master planned communities, mixed use, education, healthcare, and commercial/retail projects. Essential Duties and Responsibilities • Layout and Design residential subdivisions both stand alone and within master planned communities, mixed use developments, commercial/retail projects, etc., • Design work will include but not limited to paving, grading, drainage, water, and sewer design, • May assign the final drafting/plan production to other drafters or draft/generate or may draft/generate the plans for oneself., • Prepares engineering calculations in support of infrastructure design, • Review and apply design standards established by all agencies involved in each project., • Ability to work within the scope, schedule, and budget assigned to each project., • Prepare hour estimates in support of project pursuits, • Manage and mentor designers or drafters., • 8-10 years of experience in design and plan production for residential land development projects and general land development type projects., • Proficient in AutoCAD Civil 3D design and plan production tools., • Must be able to use Microsoft Office 365, including familiarity with Teams., • Must be able to interact and effectively communicate, both verbally and written, with team and clients., • Strong land development Civil 3D modeling and plan production tools., • Detail oriented, professional attitude, team player, and self-starter., • Must be able to work independently and in a team environment to prioritize various projects., • A work-life balance with a hybrid (in office / remote) environment that includes 1/2-day Fridays!, • Take advantage of paid holidays, as well as an optional Winter Break designed to help you relax and make memories with family and friends., • Excellent medical coverage, dental, and vision insurance plans., • Career development programs with the ability to shape your career path and pursue your passions., • Catered lunch-and-learns that provide continuous learning as a team., • Covered industry association memberships and networking opportunities., • Recognition programs that celebrate your outstanding performance and hard work. Entellus, Inc. is an Equal Opportunity Employer, and employment selection decisions are based on merit, qualifications, and abilities. Entellus does not discriminate in employment opportunities or practices based on race, color, religion, gender, national origin, age, sexual orientation, gender identity, disability, veteran status, or any other characteristic protected by country, regional, or local law. Applicants must be legally authorized to work for Entellus in the U.S. without employer sponsorship. We do not typically sponsor H1-B or any other work visa petitions. #LI-SS1

Job Description Your knowledge & contributions will matter here!! Join our collaborative team!! We are looking for passionate drafters like you! This position is for energetic individuals that will provide drafting services for architects, owners and general contractors. Our team is a talented group of drafters who work in AutoCAD and Revit. We collaborate with our team of engineers on a variety of projects from simple to complex. RESPONSIBILITIES: • Create detailed technical drawings and plans using AutoCAD software, • Collaborate with engineers, architects, and other team members to develop accurate designs, • Review and modify drawings based on project requirements and feedback, • Ensure compliance with industry standards and company guidelines, • Proficiency in AutoCAD software, • Strong attention to detail and accuracy, • Excellent communication and teamwork skills If you are interested in joining our team, please send your resume to . Company DescriptionCaruso Turley Scott provides excellence in structural engineering, drafting, outstanding customer service, and integrity. We have a successful reputation for responsiveness, efficient and progressive design solutions, and extensive experience in all building types. Our team is licensed in all 50 states where we have made a lasting impact on communities across the continent. Caruso Turley Scott’s high level of repeat client business demonstrates our ability to meet or exceed our clients’ expectations.Caruso Turley Scott provides excellence in structural engineering, drafting, outstanding customer service, and integrity. We have a successful reputation for responsiveness, efficient and progressive design solutions, and extensive experience in all building types. Our team is licensed in all 50 states where we have made a lasting impact on communities across the continent. Caruso Turley Scott’s high level of repeat client business demonstrates our ability to meet or exceed our clients’ expectations.

Job Description Bingham Engineering Consultants is a highly regarded Structural Consulting Firm in business for over 45 years, serving a broad variety of structural needs, including structural design of new construction projects such as; tract and luxury custom houses, post tensioned foundations, commercial spaces and residential structures; forensic observations of damaged structures and more. We are able to provide our clients with innovative and economical structural designs that allow projects to be built in the most efficient manner. Due to our growth and excellent reputation, we are adding Project Engineers to our team and are looking for candidates with 3+ years experience (with a Professional Engineer or Structural Engineer License). Headquartered in Phoenix Arizona, we have completed projects throughout Arizona and across the United States. Our Phoenix market is the second fastest growing city in the US, providing growing demand for our services. This position can ultimately lead to management responsibility as well as potential partnership in the firm for outstanding individuals with high quality performance. The pay for this position includes a base salary as well as an uncapped bonus based on completed projects. Complete more, earn more! Requirements • Professional Engineer or Structural Engineer License. State reciprocity will be considered., • Excellent mathematical, computer, analytical, detail-oriented, creative skills, and excellent problem solving abilities., • Microsoft office, CAD, and Windows PC experience required., • Knowledge or and/or ability to learn engineering programs we utilize; Enercalc with Retained Earth Module, Woodsizer, TEDDS, PTC MathCad, and Risa 2D., • Applicants must be able to provide his/her own reliable transportation for inspections and client meetings., • Interest in and willingness to perform site visits, observations and inspections - must be comfortable working on ladders and in small areas such as crawl spaces or attics. Qualifications • Degree in Civil or Structural Engineering., • License/Certification: Professional Engineer or Structural Engineer License (Required, state of Arizona or willingness to add Arizona)., • 3+ years experience preferred., • Willingness to travel (approx. 10%, mileage reimbursed)., • Start as soon as as possible the interview process is complete. Benefits • Health Care, Dental Insurance, Vision Insurance, disability insurance, life insurance and other supplemental insurance., • Holiday pay/time off for most major holidays, Paid time off., • Uncapped monthly bonus based on completed work., • Phoenix is the fifth largest city in the US, offering access to many events and activities. Bingham Engineering Consultants is an equal opportunity employer fostering a team environment. This is an opportunity for you to join our dynamic group of respected professionals. Job Types: Full-time, Part-time, Contract Pay: $70,000.00 - $100,000.00 per year Expected hours: 15 – 40 per week Benefits: • Dental insurance, • Flexible schedule, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Professional development assistance, • Vision insurance Schedule: • 8 hour shift Supplemental Pay: • Bonus opportunities Experience: • Professional (Structural) Engineering: 3 years (Preferred) License/Certification: • PE/SE Certification (Required) Work Location: In person or Remote HYbrid

Job Description Position Overview Avik Services LLC partners with leading e-commerce and logistics companies to deliver full-service warehouse technology, including robotics and automation systems. We are seeking an Installation Lead / Millright to join our dynamic, fast-paced team. In this hands-on role, you will lead small teams in the installation and deployment of advanced communication and warehouse technologies. You will travel extensively throughout North America to customer distribution sites, with all work-related travel expenses reimbursed. There is room to grow and excel in this fast-paced organization. Key Responsibilities & Required Qualifications The candidate should be a self-starter that can handle multiple tasks simultaneously and show the ability to continually advance your knowledge to drive process improvement for future installations. The candidate should have the ability to quickly read and absorb installation documentation to accurately repeat tasks, in addition to leading others. The candidate should be comfortable communicating within their own team and directly with clients. This is a field-based role with significant travel, full benefits and opportunities to advance. • Background in construction, warehousing, or equipment installation., • Experienced in measuring and using hand and power tools to install mechanical systems and components., • Adept at reading and interpreting installation documentation., • Work independently to complete repeated installation tasks with accuracy., • Lead 3–4 person teams during on-site hardware installations., • Travel extensively (up to two weeks at a time) to client warehouse/distribution sites., • Ability to work in warehouse environments, lifting and carrying materials of up to 50 lbs., • Ability to ravel extensively - 80-100% with options to travel home every 2 weeks., • Ability to book travel using Concur and submit expense reports in a timely manner., • Pass a background check with no felony convictions (last 7 years)., • Basic computer skills, including familiarity with Microsoft Office Suite, • Forklift, Aerial lift and OSHA certifications a plus

Job Description Swiss/Turn-Mill CNC Programmer HIGHLIGHTS Location: Phoenix, AZ 85027 (with training in Chatsworth, CA) Position Type: Direct Hire Hourly / Salary: $30-33 an hour based on experience Residency Status: US Citizen or Green Card Holder ONLY Our client is looking for a Swiss/Turn-Mill CNC Programmer to join their team! Job Description: The Swiss/Turn-Mill CNC Programmer will manage the CNC-program creation process for machine shop with expanding CNC Swiss late and Turn-mill lathes Key Responsibilities: • Interprets drawings, create new solid models (where necessary) to generate CNC programs for Swiss lathes and/or multi-axis Turn-Mill (double-turret, double-spindle) machines using CAD/CAM system (preferably Part-Maker, FeatureCam, etc.), • Include proper methodology, tooling, cutting speeds and feeds in order to generate quality parts in accordance to product specifications., • Set-up to produce First Piece on the Swiss/Turn-Mill machines. Studies and interprets drawings, specifications or sample parts to determine dimensions and tolerances of finished work pieces, sequence of operations, and set-up requirements to maximize efficiency., • Creates set-up sheets (tool list, x-y-z home positions) and communicate with set-up machinists of the tooling requirements, fixtures, etc., • Monitors and verifies the accuracy of each job’s initial set-up and final outcome., • Revises, update, and maintain all programs and documents based on engineering changes or per process improvement projects dictate., • Work with machine shop supervisor/manager on process improvements and cycle time reductions including testing of new cutting tools and new processes to balance main/sub cycle time., • Communicates with set-up machinists and/or Machine Shop Supervisor/Manager regarding tooling/fixtures/material requirements for upcoming and/or existing jobs on the floor., • Provides shop floor assistance with inspection methods, training on machines, machine alarms, and program issues., • Applicant must be ITAR compliant., • 5+ years of experience programming Swiss CNC Machines and/or Turn-Mill lathes (Tsugami, Star, and double-spindle + double-turret CNC machines) preferred., • Deep understanding of machining fundamentals or formula correlation of machining parameters (i.e. SFM, RPM, IPR, IPT, etc.) on cutting tool, work-piece materials, etc., • Knowledge of newer Fanuc controls (18i, 31i), including Tsugami machines (S-series, B0-series,) multi-axis turn-mill centers and ability to learn and adapt to ever changing technology., • Knowledge of measuring equipment and the application of such instruments, including but not limited to calipers, micrometers, depth gauges, indicators, comparators., • Deep understanding of mechanical drawings and specifications and ability to interpret geometric tolerances and dimensions call-outs on drawings., • Detailed knowledge of programming segments and corresponding operations., • Working knowledge of various tool holders, cutting tools, boring bars and inserts used on various machines, • Knowledge and understanding of AS9100 quality system., • Proficient level of Microsoft Office Suite (Microsoft Word, Outlook, and Excel, etc)., • Technical certificate from trade school/community colleges on CNC machining and/or programming. What We Do We provide Scalable Technical Staffing solutions encompassing SOW, staff augmentation, and direct hire placement for Fortune 2000 companies, with niche service offerings in Cyber Security, Digital, Field Services, and Professional Services. Our recruiting teams are specialized, certified, and have endured rigorous technical boot camps and ongoing required educational courses and meetups. What Proof We Have We have experience in scalable IT Staffing since the year 2000. Our IT experts have helped Fortune 2000 corporations embrace the cybersecurity and digital space, with many of our experts remaining on contract with clients for 8+ years. Our staffing experts have been engaged to speak at cybersecurity conferences, and our teams are certified and specialize in divisions focused around cyber, digital, field, and professional services. Why People Want It Our valueWho We Are\r\nGTN is the leader in technical staffing, leveraging innovation to drive next-generation recruiting to Fortune 2000 companies.\r\n\r\nWhat We Do\r\nWe provide Scalable Technical Staffing solutions encompassing SOW, staff augmentation, and direct hire placement for Fortune 2000 companies, with niche service offerings in Cyber Security, Digital, Field Services, and Professional Services. Our recruiting teams are specialized, certified, and have endured rigorous technical boot camps and ongoing required educational courses and meetups.\r\n\r\nWhat Proof We Have\r\nWe have experience in scalable IT Staffing since the year 2000. Our IT experts have helped Fortune 2000 corporations embrace the cybersecurity and digital space, with many of our experts remaining on contract with clients for 8+ years. Our staffing experts have been engaged to speak at cybersecurity conferences, and our teams are certified and specialize in divisions focused around cyber, digital, field, and professional services.\r\n\r\nWhy People Want It\r\nOur value

Job Description Sun Mechanical is on-boarding Service Plumber for a long-term career. This path will challenge them, giving opportunities to improve their skills and grow. Service Plumber with be performing service calls, maintenance, install, repair, on Gas, Water, Waste, and Mechanical Piping. Sun mechanical promotes growth, Getting the benefit to work on what fits your skills in a safe environment and with great people. We believe in Quality, Understanding, Teamwork, Training, Customer Satisfaction, Safety, Quality of life. Sun Mechanical Contracting, Inc. is where Careers are Made. Essential Duties and Responsibilities include the following (other duties may be assigned): · Skilled in the use of hand and power tools used in the plumbing trade · Knowledge of building codes, safety regulations, and safety practices · Ability to read and follow blueprints and rough drawings · Familiarity with PVC, CPVC, PEX, cast iron, and copper · Effective oral communication and interpersonal skills · Ability to complete projects unsupervised and unassisted · Excellent problem-solving skills · Attention to detail and ability to perform multiple tasks simultaneously · Proficiency in basic mathematics and conversion of measurements · Familiar with plumbing trade terminology Competencies To perform the job successfully, an individual should demonstrate the following competencies: · Attendance/Punctuality - Is consistently at work and on time. · Problem Solving - Identifies and resolves problems in a timely manner · Technical Skills - Strives to continuously build knowledge and skills, Shares expertise with others. · Communication - Able to read and interpret written information use of Electronic Device. Verbally Communicate to Staff and Customers with professional manner. · Quality Management - Looks for ways to improve and promote quality; Demonstrates accuracy and thoroughness. · Planning/Organizing - Prioritizes and plans work activities; Uses time efficiently; Plans for additional resources. · Quality - Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Monitors own work to ensure quality. Safety and Security - Reports potentially unsafe conditions; Uses equipment and materials properly Company DescriptionCAD is in office position only. In addition to creating “Shop” drawings for fabrication, you will be responsible for creating and reading detailed installation plans for Plumbing and Mechanical (Hydronic) Piping, and HVAC. Providing consistent and accurate material take-offs for purchasing is essential to this role. 3D modeling and navigating combined trade models in a 3D environment for coordination both internally and externally. ESSENTIAL DUTIES AND RESPONSIBILITIES -\tIntermediate 3D modeling skills in AutoCAD -\tMotivated, adaptive, and strong personality -\tStrong interpersonal skills -\tExcellent abilities with computers and Microsoft Office products -\tProficiency with Autodesk Products, ie: AutoCAD Fabrication, Revit -\tStrong Time-Management Skills -\tStrong Attention to detail and accuracy with numbers -\tAbility to communicate professionally with internal and external staff -\tAbility to work in a very fast-paced environment QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED); One to two years prior experience or an equivalent combination of education and experience with CAD. Trade Schooling, Or CAD CertificationCAD is in office position only.\r\n\r\nIn addition to creating “Shop” drawings for fabrication, you will be responsible for creating and reading detailed installation plans for Plumbing and Mechanical (Hydronic) Piping, and HVAC. Providing consistent and accurate material take-offs for purchasing is essential to this role. 3D modeling and navigating combined trade models in a 3D environment for coordination both internally and externally.\r\n\r\n\r\nESSENTIAL DUTIES AND RESPONSIBILITIES \r\n•\tIntermediate 3D modeling skills in AutoCAD\r\n•\tMotivated, adaptive, and strong personality\r\n•\tStrong interpersonal skills\r\n•\tExcellent abilities with computers and Microsoft Office products\r\n•\tProficiency with Autodesk Products, ie: AutoCAD Fabrication, Revit\r\n•\tStrong Time-Management Skills\r\n•\tStrong Attention to detail and accuracy with numbers\r\n•\tAbility to communicate professionally with internal and external staff\r\n•\tAbility to work in a very fast-paced environment\r\n\r\nQUALIFICATIONS:\r\nTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.\r\n\r\nEDUCATION and/or EXPERIENCE:\r\nHigh school diploma or general education degree (GED); One to two years prior experience or an equivalent combination of education and experience with CAD.\r\nTrade Schooling, Or CAD Certification

Job Description Seeking immediate full-time experienced HVAC CAD Detailer for Phoenix based Mechanical Contractor. • Be familiar with all HVAC systems and sheet metal, • Have working knowledge of AUTOCAD and REVIT, • TSI (Autodesk Fabrication CADmep) and Trimble software experience also a plus, • Have solid time management skills, • Have exceptional standards for quality and strong attention to detail, • Be able to work autonomously, as well as within a team Minimum 3 years’ experience required Email resumes with pay requirements to: Benefits Competitive compensation Comprehensive benefits including medical, dental, vision, life insurance, disability, PTO, 401K, and paid holidays Company DescriptionHACI is a premier Mechanical Contracting firm in the Valley of the Sun, serving the state of Arizona from our Phoenix office. We are proud to say our annual volume of work has grown to over $75 million in the past five years. Today, HACI constructs a variety of jobs in both public and private sectors, from shell buildings, hospitals, manufacturing, to tenant improvements. We have extensive experience in design-build and design-assist projects as well as plan-and-spec. We have an excellent working relationship with many of Arizona’s largest General Contractors, as well as with several mechanical engineering/design firms. HACI Mechanical Contractors Inc. is an equal opportunity employer HACI Mechanical Contractors Inc. participates in E-Verify and requires appropriate hiring documentation HACI Mechanical Contractors Inc. maintains a drug-free environment and requires drug testing as a condition of employmentHACI is a premier Mechanical Contracting firm in the Valley of the Sun, serving the state of Arizona from our Phoenix office. We are proud to say our annual volume of work has grown to over $75 million in the past five years. Today, HACI constructs a variety of jobs in both public and private sectors, from shell buildings, hospitals, manufacturing, to tenant improvements. We have extensive experience in design-build and design-assist projects as well as plan-and-spec. We have an excellent working relationship with many of Arizona’s largest General Contractors, as well as with several mechanical engineering/design firms.\r\n\r\nHACI Mechanical Contractors Inc. is an equal opportunity employer\r\nHACI Mechanical Contractors Inc. participates in E-Verify and requires appropriate hiring documentation \r\nHACI Mechanical Contractors Inc. maintains a drug-free environment and requires drug testing as a condition of employment

Job Description Job Title: Senior Manufacturing Automation Engineer Location: Goodyear / Phoenix, Arizona Department: Engineering Employment Type: Full-Time | On-Site FLSA Status: Exempt About GTI Energy GTI Energy, a division of GTI Fabrication, designs and builds advanced modular infrastructure for mission-critical markets, including energy storage systems, data centers, and defense applications. We are growing rapidly and investing heavily in automation to increase capacity, precision, and efficiency at our industrial fabrication facilities. Position Overview We are seeking a Senior Manufacturing Automation Engineer to lead the development, deployment, and optimization of automated robotic welding systems across our production lines. This is a hands-on technical role focused on designing, programming, integrating, and maintaining robotic welding cells with PLC controls. This position will play a key role in advancing GTI’s automation strategy, ensuring our fabrication processes achieve the highest standards of safety, quality, efficiency, and scalability. Key Responsibilities Automation Applications, Strategy & CapEx Justification • Partner with operations, manufacturing engineering, and quality to identify automation use cases that improve safety, quality, and throughput., • Develop capital expenditure justifications and ROI/payback analyses to support automation project funding., • Lead cross-functional project teams (quality, safety, operations, manufacturing engineering, and facilities) assigned to automation initiatives., • Develop specifications for individual automation projects and create GTI-wide standards for control systems, preferred robot manufacturers, and welding equipment OEMs., • Design, specify, and implement robotic welding cells for modular steel fabrication., • Select and oversee external integrators to execute detailed design work., • Lead internal and external design reviews to verify system safety, quality, and technical alignment., • Coordinate installation, validation, and qualification (IQ/OQ/PQ) of automation systems with integrators and plant teams., • Develop and modify PLC/HMI logic (Allen-Bradley, Siemens, etc.) to control robotic welding cells and integrate them with conveyors, positioners, and vision systems., • Write and optimize robot programs for MIG, TIG, and spot welding applications., • Provide hands-on support to troubleshoot automation systems and minimize downtime., • Lead preventive maintenance schedules for robotic welding systems and controls equipment., • Analyze production data to identify bottlenecks and quality issues., • Implement Lean and Six Sigma methodologies to drive continuous improvement in robotic welding operations., • Partner with mechanical engineers, manufacturing engineers, quality, and maintenance teams to ensure production readiness of automated systems., • Maintain detailed technical documentation including robot programs, schematics, and SOPs., • Bachelor’s degree in Mechanical, Electrical, Mechatronics, or Industrial Engineering, • 8–10+ years of experience in manufacturing automation or controls engineering, • Hands-on experience implementing and supporting robotic welding systems, • Proficiency with industrial welding robots (FANUC, ABB, Motoman, KUKA or similar), • Strong experience with PLC programming and controls integration (Allen-Bradley, Siemens, etc.), • Proven success leading cross-functional automation projects and managing integrators, • Strong understanding of welding processes (GMAW, GTAW, resistance spot welding) and metallurgy basics, • Knowledge of industrial safety standards (OSHA, NFPA79) and risk assessments for robotic systems, • Excellent analytical, problem-solving, and troubleshooting skills, • Strong project management skills to coordinate multiple automation projects and vendor integrations, • Experience with robotic simulation tools (RoboGuide, RobotStudio, etc.), • Experience integrating vision systems, sensors, motion control, or automated material handling, • Familiarity with CAD (SolidWorks, AutoCAD) for fixture or tooling design, • Lead automation for a rapidly growing industrial fabrication company, • Hands-on, high-impact technical role in a fast-paced environment, • Competitive compensation and benefits

Job DescriptionWise Staffing group is in search of CNC Machinist in West Phoenix!Job Title: CNC MachinistPay: $18- $27Location: Phoenix, AZCompany: Wise Staffing GroupAbout us:Wise Staffing Group, headquartered in Mississippi, is a full-service human resource company specializing in temporary and career staffing. Committed to providing excellent customer service.Apply today for our Aluminum Tig Welder position - Weekly Pay for jobs in Phoenix, AZ.Wise Staffing Group Offers:• Direct deposit & Global Cash Debit Cards• Health, vision, dental, life, and disability insurance• Overtime availableCNC Machinist Job Summary: We are seeking a skilled and experienced Machinist to join our team. The ideal candidate will be responsible for operating, setting up, and programming CNC machines, including lathes mills, and manual machining equipment, to manufacture high-precision transmission parts according to specifications. This role requires attention to detail, problem-solving skills, and a strong understanding of machining processes in the automotive industry.CNC Machinist Key Responsibilities: • Set up, operate, and program CNC and manual machines to produce high-quality transmission components., • Read and interpret blueprints, engineering drawings, and technical documents specific to automotive transmissions., • Select and install appropriate cutting tools, fixtures, and attachments for machining transmission parts., • Perform quality control checks using calipers, micrometers, and other precision measuring instruments to ensure accuracy., • Monitor machining processes and make necessary adjustments to maintain tight tolerances required for transmission components., • Troubleshoot machine issues and perform basic maintenance to keep equipment in optimal working condition., • Maintain a clean and organized work area while following all safety protocols., • Collaborate with engineers and production teams to optimize manufacturing processes for automotive transmission parts.CNC Machinist Requirements:, • High school diploma or equivalent; technical training or certification in machining is preferred., • Minimum of 2 years of experience working with CNC and manual lathe and milling machines., • Proficiency in G-code programming and CAD/CAM software., • Strong understanding of machining principles, cutting tools, and material properties specific to transmission components., • Ability to read and interpret engineering blueprints and schematics related to automotive parts., • Excellent problem-solving skills and mechanical aptitude., • Ability to work independently and in a team environment., • Strong attention to detail and commitment to quality control in high-precision manufacturing., • Physical ability to lift-up to 50 lbs. and stand for extended periods.Want to contact us?, • Wise Staffing Group 10620 N 43rd Ave Ste 9 Glendale, AZ 85304

Job Description DIRECT HIRE | DESIGN DRAFTER | Phoenix, AZ Our client is looking for talented and detail-oriented Designer/Drafters with experience in structural/architectural drafting/design to join their growing team. Exciting opportunity to join a growing business (locations nationwide) and have access to new technologies as they pursue integrating AI technologies and advanced rendering software (fly-bys, walk-throughs, photographic-level renderings, etc.). Key Skills (do not have to have all): CAD, REVIT, Bluebeam, BIM, 3D Modeling, Rendering, Construction Materials, etc. Experience with 3D renderings would be a big plus • Anticipate $50K-$75K, dependent on experience (multiple positions open with varying experience requirements, i.e. Drafting vs Designing), • Full suite of benefits, • Design and Drafting: Develop detailed drawings and plans for commercial buildings using AutoCAD., • Collaboration: Partner with engineers, architects, and project managers to create comprehensive design solutions tailored to construction methods., • Plan Review: Interpret and review project specifications, blueprints, and other technical documents specific to design., • Compliance: Ensure all designs meet relevant building codes, standards, and regulations., • Revisions: Update and revise drawings based on feedback from stakeholders and evolving project requirements., • Prefer Design/Drafting related degree/certifications, • 2+ years of experience in structural or architectural drafting/design for commercial buildings, • Proficiency in AutoCAD (3D), REVIT + Illustrator, SketchUp, Bluebeam, or Adobe InDesign, • Strong understanding of construction methods, materials, and building codes., • Exceptional precision and attention to detail in drafting and design work., • Excellent verbal and written communication skills., • Ability to identify issues and develop effective solutions., • Ability to collaborate effectively within a multidisciplinary team environment., • Portfolio of design or drafting work required EEO

Job Description PROJECT ENGINEER (Structural) ABOUT DIBBLE Founded in 1962, we provide a full range of civil engineering services to public and private sector clients across Arizona, Colorado, and the Southwestern United States. Our broad market expertise offers the ability to deliver complete engineering solutions from concept to closeout. Our business is built on honesty, ethics, accountability, quality, and service. Our people-focused culture is important, and we consider our employees to be our greatest asset. This culture is why we have so many long-term employees that have been with our firm between 15 and 35 years. Our employees enjoy an industry-leading benefits program, the ability to balance their home and work life, opportunities for growth and development, company activities, and various opportunities to give back through community service. Dibble employs the industry's finest engineers, designers, and planners, providing expertise and valued resources for municipalities, private clients, federal, state, and local agencies. Dibble is looking for a skillful and highly motivated Project Engineer to join our Structural team. This is an opportunity for you to join our fine group of respected professionals. SUMMARY: We are seeking a highly motivated Structural Engineer to join our Phoenix or Mesa, Arizona office. Our employees enjoy our industry-leading benefits program, ability to balance their work life and home life, opportunities for development and growth, company events & activities, and the various opportunities to give back with our community activities. This versatile individual will be responsible for developing business and maintaining client relationships, providing engineering and special inspections, and leading structural design efforts for projects associated with any type of structure, including but not limited to, buildings, bridges, culverts, above or below ground pipes, and oceanside and marina piers/docks. This role reports to the Structural Department Leader. ACCOUNTABILITIES: • Prepare construction plans, technical specifications, technical studies and reports., • Prepare quantity take-offs and/or calculations., • Direct CAD designers and staff in the preparation and production of construction plans., • Provide quality reviews of own work and work by others in accordance with Company's quality control program and processes., • Assist in business development and proposal preparation., • Participate in strategic business development initiatives and marketing pursuits., • Assist in construction administration and inspection of projects, including the review of shop drawings, preparation of inspection reports, material quantity verification, and reviewing and responding to contractor material submittals, RFI's, and change order requests. MINIMUM REQUIREMENTS: Qualifications: The qualified candidate will enjoy working in a team-oriented environment and have a strong commitment to the Values of the Company. They will have the ability to participate in complex and high value projects, manage multiple projects simultaneously without sacrificing quality or effectiveness, make sound decisions for the benefit of the project and the Company, and be able to consistently meet project deadlines while always maintaining a high level of quality. • Demonstrate strong technical knowledge of structural engineering principles., • Demonstrate competence in the use and application of Risa3D, Risa-Foundation, Mathcad, Enercalc, Bentley, and AutoCAD., • Proficient in Microsoft Office Suite (Word, Excel, Power Point)., • Ability to mentor and train other Structural Designers and Engineers-in-Training., • Strong technical writing skills, and ability to convey engineering decisions and concepts to non-technical and technically based audiences., • Ability to work within a variety of team environments, including varying team sizes and personnel., • Ability to work independently with minimal oversight., • Provide leadership and management of project teams., • Prioritize and meet project budgets and multiple deadlines., • Hold a valid motor vehicle license with the ability to be insured., • Ability to travel approximately 30% of the time with some overnight travel. Education and Experience: • Must have a Bachelor's Degree (Master's Degree or higher preferred) in Civil Engineering, or a related field, from an accredited college., • Must be registered as a Professional Engineer (PE) and able to obtain an NCEES record within 6 months of employment., • Minimum 6-10 years of structural engineering experience., • Experience with building and miscellaneous structures design., • Experience with existing condition assessments and inspection of structures., • Experience with bridge design and NBIS bridge inspections., • Experience with strengthening and repairing existing structures using Fiber Reinforced Polymers (FRP) a plus. LOCATION: This opportunity is in our Phoenix or Mesa office COMPENSATION: Salary depends on level of skills and experience READY TO JOIN OUR ENGINEERING TEAM? If you feel that you would be right for this position, please fill out our initial 3-minute, mobile-friendly application. We look forward to meeting you! Dibble is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. Job Posted by ApplicantPro

Job Description All Things Metal is a five-times best places to work award winner. We are seeking a dedicated CNC plasma operator to join our team! This person will be responsible for setting up and operating our CNC plasma cutting table. All Things Metal is a fast-paced environment with an existing culture in a challenging industry. We are looking for individuals to help take us to the next level and that are here to stay. This isn't a temporary position where you'll be laid off in a couple months after you complete a job. Description of Duties and Job Responsibilities: · Load and unload the burning table using forklift with chains or magnet · Remove cut product from the table, stack on pallets or place in bins, and ensure timely delivery to the next department as required · Program and operate plasma cutter · Program and set up using proper gases and cutting tips · Generate multiple part nestings · Perform routine maintenance including cleaning machine and workspace · Work in accordance to established safety rules and good housekeeping practices · Work on additional equipment or tasks outside the job description as directed by the Plant Manager · Perform all necessary quality checks during production and follow procedures when defective parts are discovered · Complete daily production reports accurately · Safety Sensitive Position · Must be able to work independently Preferred Qualifications: · 1+ years of experience programming and operating a CNC controlled plasma cutting system · Experience with reach fork lifts, basic hand tools, tape measure. · Experience using basic CAD and nesting · Able to read interpret blue prints and understand part tolerances per print specification · Experience with DXY,DWG, and various print file types · Must be able to drive a forklift and safely handle materials Technical Skills & Competencies: · Ability to interpret a variety of instructions and make decisions based on them · Excellent communication skills · Forklift equipment and crane operation skills Benefits: • $18+ an hour depending on experience and work ethic, • Steady work!, • First- Time home buyer incentive with optional home buying references and a $500 bonus, • Dave Ramsey’s SmartDollar Budget & Financial Education Library, • Full benefits, including PTO/ Sick time, • Additional company-wide giveaways, • 401K plan with Profit Sharing Contributions, • Family friendly culture events Powered by JazzHR OMVTzUgWad

Job Description United Integrated Services (USA) Corp. was founded in Phoenix, Arizona in 2020. UIS is a U.S. subsidiary of United Integrated Services Co., Ltd. (UIS Taiwan) which was founded in Taiwan in 1982. UIS is a multidisciplinary engineering and construction company. We provide fully integrated design-build services to our clients in the high-technology industry for their manufacturing facility needs. Our scope of services includes engineering design, high-tech factory planning, and on-time equipment and material delivery in which clean-room systems, HVAC, electrical systems, and tool hook-up, are all vital parts in need of total coordination. Summary: We are searching for an Electrical Engineer to join our team. The successful candidate will be responsible for designing, implementing, and maintaining electrical systems in a cleanroom environment, ensuring compliance with semiconductor production regulations and standards. Experience in electrical construction is highly desired. This is a full time onsite position located in North Phoenix, AZ (85027). Essential Duties and Responsibilities include the following. Other duties may be assigned. • Perform requirements classification of clients, communicating project requirements and design review with internal & external design team for Electrical system., • Perform the required scope of work and clarify specification with stakeholders., • Assist procurement team on electrical systems equipment & materials' and assist in contractors' awards., • Understand isometrics, P&ID and CAD drawings specifically for electrical systems., • Review, approve and oversee the installation of electrical systems., • Inspect work in progress to ensure that workmanship conforms with specifications and assure adherence to construction schedules., • Review progress reports, materials used and costs, contract payment application, and adjust work schedules as indicated by the reports., • Review & reply RFI (Request for information) and change orders., • Provide daily, weekly, and monthly reports for internal use and client communication., • Identify and solve problems., • Scheduling and schedule execution., • Understand drawing, and review specifications and estimation., • Other responsibilities as assigned. Qualifications: The requirements listed below are representative of the knowledge, skill, and/or ability required. Education/Experience: * • Bachelor's degree in Electrical Engineering, Construction Management, or a related field., • 3-5+ years of experience Electrical system planning., • Strong understanding of high and low voltage power, lighting sockets, fire protection power, broadcasting, weak current, refuse direction indicator, grounding * lightening protection system, • Proficiency in Microsoft Office Suite products (Word, PowerPoint, Excel, Outlook, Teams)., • Ability to use engineering software, such as AutoCAD, Primavera, or others., • Excellent organizational and time management skills., • High level of attention to detail, and highly organized., • Ability to act with integrity, professionalism, and confidentiality., • Ability to effectively prioritize responsibilities depending on project needs. Ability to effectively present information and respond to questions from groups of managers, and employees., • Ability to develop and maintain successful relationships with all levels of employees, clients, and subcontractors., • Must be able to work under pressure and meet deadlines while maintaining a professional attitude., • Effective English verbal and written communication skills required., • Ability to communicate in Mandarin/Taiwanese is a plus., • Ability to effectively present information and respond to questions from groups of managers, customers, and employees., • Read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Write routine reports and correspondence. Nice to have: • Start-up experience., • Verbal communication skills in Mandarin., • Professional Engineer license. Additional Requirements: • Must have and maintain a valid Arizona driver's license. May be required to travel to other sites within Arizona to perform certain work functions. Physical Demands & Work Environment This position requires the ability to lift and carry up to 50 lbs for transporting documents, equipment, and other materials as needed. The role involves extended periods standing, walking and/or of sitting while working at a computer. Frequent movement between the construction trailer and various areas of the construction site is necessary. The position is based at the construction job site (trailer office). Even though the exposure of hazardous work conditions would be minimal, the employee may be required to visit the work area of the jobsite and thus be exposed to some typical work hazards that may be present on a construction site, such as dust, moving machineries, weather, caustic chemicals, noise etc. UIS would provide the required safety protection to ensure the safety of UIS employees and comply with all OSHA standards. Equal Employment Opportunity: UIS is an Equal Opportunity Employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, veteran status. Or any other characteristic protected by federal, state, or local law. We believe in fostering a diverse and inclusive workplace where all individuals are treated with respect and dignity. Disclaimer: The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties as assigned by their supervisor.

Job Description Experienced Dentist Opportunity – Join Our Team! Are you a skilled and compassionate Dentist with at least 2 years of clinical experience or completion of a GPR or AEGD program? We are seeking a dedicated professional to provide a wide range of services and exceptional care to our patients. If you’re passionate about dentistry and looking for a supportive, innovative environment to grow your career, we’d love to meet you! What You’ll Do As a Dentist in our practice, you will work collaboratively with our hygienists and dental assistants to deliver quality care. Your responsibilities will include: • Examining and diagnosing dental illnesses, infections, and conditions., • Performing procedures, including restorations, root canals, extractions, and dental implants., • Designing and fitting dental prosthetics, such as bridges, crowns, and dentures., • Conducting surgeries on diseased tissues and bones., • Promoting oral hygiene and preventive dental care through patient education and regular check-ups., • Developing individualized treatment plans to improve oral health and habits., • Preparing patients for procedures with oral sedation or anesthesia as necessary. The ideal candidate for this role will have: • A valid State DDS or DMD license., • At least 2 years of clinical experience or completion of a GPR (General Practice Residency) or AEGD (Advanced Education in General Dentistry) program., • Proficiency with dental tools, equipment, and digital workflows., • Experience with extractions, root canals, surgeries, and restorative procedures., • Excellent communication skills to explain procedures and build rapport with patients., • A pleasant, compassionate demeanor to make patients feel comfortable. At our practice, we combine patient-centered care with cutting-edge technology to deliver exceptional results. As part of our team, you’ll enjoy: • Access to advanced tools, including CBCT, CAD/CAM design software, 3D printers, and milling machines., • A supportive work environment focused on collaboration and professional growth., • Competitive compensation and benefits, including CE reimbursement. Let’s create brighter smiles together!

Job Description United Integrated Services (USA) Corp. was founded in Phoenix, Arizona in 2020. UIS is a U.S. subsidiary of United Integrated Services Co., Ltd. (UIS Taiwan) which was founded in Taiwan in 1982. UIS is a multidisciplinary engineering and construction company. We provide fully integrated design-build services to our clients in the high-technology industry for their manufacturing facility needs. Our scope of services includes engineering design, high-tech factory planning, and on-time equipment and material delivery in which clean-room systems, HVAC, electrical systems, and tool hook-up, are all vital parts in need of total coordination. Summary: We are searching for an Electrical Engineer to join our team. The successful candidate will be responsible for designing, implementing, and maintaining electrical systems in a cleanroom environment, ensuring compliance with semiconductor production regulations and standards. Experience in electrical construction is highly desired. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Perform requirements classification of clients, communicating project requirements and design review with internal & external design team for Electrical system., • Perform the required scope of work and clarify specification with stakeholders., • Assist procurement team on electrical systems equipment & materials' and assist in contractors' awards., • Understand isometrics, P&ID and CAD drawings specifically for electrical systems., • Review, approve and oversee the installation of electrical systems., • Inspect work in progress to ensure that workmanship conforms with specifications and assure adherence to construction schedules., • Review progress reports, materials used and costs, contract payment application, and adjust work schedules as indicated by the reports., • Review & reply RFI (Request for information) and change orders., • Provide daily, weekly, and monthly reports for internal use and client communication., • Identify and solve problems., • Scheduling and schedule execution., • Understand drawing, and review specifications and estimation., • Other responsibilities as assigned. Qualifications: The requirements listed below are representative of the knowledge, skill, and/or ability required. Education/Experience: • Bachelor's degree in Electrical Engineering, Construction Management, or a related field., • 0-5 years of experience Electrical system planning., • Construction experience preferred. Semiconductor construction, a plus. Skills and Competencies: • Strong understanding of high and low voltage power, lighting sockets, fire protection power, broadcasting, weak current, refuse direction indicator, grounding lightening protection system., • Proficiency in Microsoft Office Suite products (Word, PowerPoint, Excel, Outlook, Teams)., • Ability to use engineering software, such as AutoCAD, Primavera, or others., • Excellent organizational and time management skills., • High level of attention to detail, and highly organized., • Ability to act with integrity, professionalism, and confidentiality., • Ability to effectively prioritize responsibilities depending on project needs. Ability to effectively present information and respond to questions from groups of managers, and employees., • Ability to develop and maintain successful relationships with all levels of employees, clients, and subcontractors., • Must be able to work under pressure and meet deadlines while maintaining a professional attitude., • Effective English verbal and written communication skills required., • Ability to communicate in Mandarin/Taiwanese is a plus., • Ability to effectively present information and respond to questions from groups of managers, customers, and employees., • Read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Write routine reports and correspondence. Nice to have: • Start-up experience., • Verbal communication skills in Mandarin., • Professional Engineer license. Additional Requirements: This position requires the ability to lift and carry up to 50 lbs for transporting documents, equipment, and other materials as needed. The role involves extended periods standing, walking and/or of sitting while working at a computer. Frequent movement between the construction trailer and various areas of the construction site is necessary. The position is based at the construction job site (trailer office). Even though the exposure of hazardous work conditions would be minimal, the employee may be required to visit the work area of the jobsite and thus be exposed to some typical work hazards that may be present on a construction site, such as dust, moving machineries, weather, caustic chemicals, noise etc. UIS would provide the required safety protection to ensure the safety of UIS employees and comply with all OSHA standards. Equal Employment Opportunity: UIS is an Equal Opportunity Employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, veteran status. Or any other characteristic protected by federal, state, or local law. We believe in fostering a diverse and inclusive workplace where all individuals are treated with respect and dignity. Disclaimer: The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties as assigned by their supervisor.

Job Description We are seeking a talented and detail-oriented Truss Designer to join our team. As a Truss Designer, you will be responsible for creating detailed designs and drawings for various types of trusses used in construction projects. Your primary duties will include interpreting architectural plans and specifications, analyzing structural requirements, and using specialized software to design truss systems that meet building codes and standards. Key Responsibilities: • Interpret architectural plans and specifications to determine truss requirements for construction projects., • Collaborate with architects, engineers, and other stakeholders to understand project objectives and constraints., • Use specialized software (such as MiTek, Alpine or Simpson) to create accurate and detailed truss designs., • Analyze structural requirements and calculate load-bearing capacities to ensure truss designs meet safety standards and building codes., • Select appropriate materials and components for truss construction, considering factors such as cost, durability, and sustainability., • Produce comprehensive design drawings, including plans, elevations, and cross-sections, to communicate truss specifications to manufacturing teams and contractors., • Review and revise truss designs based on feedback from stakeholders, regulatory authorities, or changes in project requirements., • Stay updated on industry trends, technological advancements, and regulatory changes related to truss design and construction. Qualifications: • Proven experience in truss design, preferably in the construction industry., • Proficiency in computer-aided design (CAD) software, with the ability to quickly learn and adapt to new tools and technologies., • Strong analytical skills and attention to detail, with the ability to perform structural calculations and ensure compliance with building codes and standards., • Excellent communication and interpersonal skills, with the ability to collaborate effectively with cross-functional teams., • Knowledge of construction materials, building methods, and industry best practices related to truss design and construction., • Professional certification or licensure (e.g., Professional Engineer) may be preferred or required, depending on the jurisdiction and the specific requirements of the role. If you are a motivated individual with a passion for structural design and a desire to contribute to exciting construction projects, we encourage you to apply for this position. Join our team and help us create innovative and reliable truss solutions that meet the needs of our clients and communities.