Cad jobs in Wayne, New JerseyCreate job alerts

KAYGEN is an emerging leader in providing top talent for technology-based staffing services. We specialize in providing high-volume contingent staffing, direct hire staffing and project-based solutions to companies worldwide ranging from startups to Fortune 500 and Managed Service Providers (MSP) across a wide variety of industries. Job Description: Job Title: Engr 2, Product Development Location: 1 Becton drive, Franklin Lakes, NJ 07417 Duration: 12- Months Contract with possible extensions Description: Provide solid technical skill and engineering support for design and development activities for new and existing products. Support current products in terms of quality, manufacturing, supply continuity and cost improvement. Participate in executing technical and/or cross-functional project work. Contribute to a culture of innovation by proactively generating novel concepts for new products and enhancements to current product performance. Understand customer needs through literature review, customer interviews, direct observation, competitive analysis, prototype evaluation, and clinical/simulated use studies. Translate customer needs into engineering requirements into specific product, packaging and process specifications. Engineer robust and manufactural products through strong understanding and application of engineering fundamentals. Develop and execute test methods which specify measurement equipment, test set-up, measurement systems analysis, and data analysis. Write detailed technical reports based on design verification analysis/testing for design changes and product design activities. Ensure compliance with BD quality policies, procedures and practices as well as with all local, state, federal and BD safety regulations, policies and procedures. Education: BS degree in engineering is required (Mechanical or Biomedical Engineering preferred). 2-4 years of engineering experience is required, preferably in medical devices. Demonstrated ability to utilize statistical tools and computer analysis. Shift: ['• Ability to use Mechanical CAD tools (SolidWorks, CREO, ProE).', 'Concept development and Fixture design using CAD', 'Experience with sample titrations and processing samples using laboratory glassware and analytical balances', 'General laboratory skills such as biological specimen handling and basic chemistry (i.e buffer preparation and pH adjustment)', 'General mechanical testing equipment such as instron', 'Technically proficient with MS OFFICE and knowledge of statistical analysis is desired.'] Start: ['Experience with applied biological sciences, developing bioanalytical assays and test methods', 'Experience with handling biological specimens, particularly human clinical samples'] At KAYGEN, we are always looking for dynamic, talented and experienced individuals. We invite you to join our team of talented IT professionals, consulting at client locations across the globe. Our culture is team-orientated; we strive to stand by our core values of respect, honesty and integrity. Our team of experienced staffing experts will work with you to find you the best opportunity. For more information, please visit us at www.kaygen.com. Benefits: Free Healthcare Insurance Vision and Dental Insurance 401(k) Retirement Plan Free Life Insurance Sick Time Off Achieve your Kaizen by clicking here. A unique and exclusive talent community supported by Kaygen, that includes programs like: Certifications Mentorship Program Referrals Family and Wellness benefits Continuous Growth and Career Development

Shop Foreman - Machine Builder This Jobot Job is hosted by: Jade Greenlee Are you a fit? Easy Apply now by clicking the "Quick Apply" buttonand sending us your resume. Salary: $75,000 - $125,000 per year A bit about us: The Shop Foreman – Machine Builder leads daily shop operations while staying hands-on with machine assembly, machining and fabrication, of semi-custom and custom equipment. This role supervises shop personnel, drives safety and quality, coordinates workflow, and supports projects from prints/BOMs through final build, test, and shipment. Occasional client interaction and support with job estimating are included. Why join us? 401K Health Insurance Life Insurance PTO Holidays Job Details Job Details: We are seeking a driven and experienced Permanent Shop Foreman- Machine Builder to join our dynamic Engineering team. This role is a unique opportunity to lead and manage a talented team of machinists, technicians, and fabricators, while also applying your technical skills in machine building. You will be responsible for overseeing our machine shop operations, ensuring the production of high-quality machinery, and maintaining our commitment to safety and efficiency. With your leadership, our team will continue to innovate, improve, and deliver top-notch machinery to our clients. Responsibilities: 1. Oversee and manage all aspects of our machine shop, ensuring smooth and efficient operations. 2. Lead, mentor, and train a team of machinists, technicians, and fabricators. 3. Ensure the production of high-quality machinery that meets our clients' specifications and needs. 4. Develop and implement strategies for improving shop efficiency and productivity. 5. Work closely with our Engineering team to design, build, and test new machinery. 6. Maintain strict quality control standards, inspecting all machinery for defects or issues before delivery. 7. Handle the creation and management of BOMS (Bill of Materials) for all projects. 8. Foster a safe and healthy work environment, ensuring all safety protocols and standards are adhered to. 9. Manage shop resources, including ordering supplies and maintaining equipment. 10. Handle any issues or conflicts that may arise in the shop, resolving them in a timely and effective manner. Qualifications: 1. A minimum of 5 years of experience in a machine shop environment, with at least 2 years in a leadership or supervisory role. 2. Proficient in BOMS, Quality Management, and Machine Shop operations. 3. Strong knowledge of machine building and design, with a keen eye for detail and quality. 4. Excellent leadership and team management skills, with the ability to motivate and inspire others. 5. Strong problem-solving skills, with the ability to think quickly and make effective decisions under pressure. 6. Excellent communication skills, with the ability to explain complex technical concepts in a clear and understandable manner. 7. A strong commitment to safety, with knowledge of safety protocols and standards in a machine shop environment. 8. Ability to handle multiple tasks and projects simultaneously, with excellent time management skills. 9. Proficient in the use of computer software, including CAD and project management tools. 10. A degree in Engineering, or a related field, is preferred. 11. Certification in Quality Management or a related area is a plus. Interested in hearing more? Easy Apply now by clicking the "Quick Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Manufacturing Engineer Needed For Leading Manufacturing Company This Jobot Job is hosted by: Kevin Finlay Are you a fit? Easy Apply now by clicking the "Quick Apply" buttonand sending us your resume. Salary: $100,000 - $135,000 per year A bit about us: My client is a leading manufacturing company and is growing! They are looking to add a Manufacturing Engineer who will participate in identifying waste, defining value streams, productivity optimization, Kanban setups, takt time studies, labor tracking, ergonomics, material flow, pFMEA, and similar Lean Six Sigma tools. Why join us? Compensation Up To $135,000 Other Benefits Include Medical, Dental and Vision 401 (k) with company match Holiday, Vacation and Sick Time Tuition Reimbursement Health Savings Accounts (HAS) Flexible Spending Accounts (FSA) Cigna Wellness Incentive Program Employee Assistance Program (EAP) Short Term Disability Group Life and Accidental Insurance Sun Life – Accident, Critical Illness, and Hospital Indemnity Insurance Smoking Cessation Program Pet Insurance Job Details Responsibilities: Analyze blueprints, specifications, model files (CAD) and other documentation to prepare accurate simulations and supportive data sets / process models for manufacturing projects, particularly those involving insert injection molding of thermoplastics, precision machined components, and/or complex sub-assemblies for the MedTech industry Integrate fully as a partner to Business Development and Solutions Architecture Teams, with primary objective to drive new business opportunities, sales expansion – and further increase competitive advantage through systems engineering and application of Industry 4.0 practices Collaborate with engineering, production, procurement and accounting teams to gather actual cost data, historical summaries of previously quoted business (including tooling costs/lead-times, engineering resource utilization, and achieved manufacturing standards relative to those estimated) with the purpose of refining new business and existing business quotations to drive growth Partner with IT / ERP Teams (Business Analysts) and Manufacturing expand the use of existing systems for real-time / actual data collection, and adoption of new systems for manufacturing data acquisition and process optimization modeling Utilize software tools and engineering knowledge to develop detailed cost models for materials, labor, equipment, and other resources – beyond the print / model provided (look for optimization opportunities) Identify the best possible manufacturing processes and evaluate based on wholistic process flow, all process steps equipment / manufacturing processes for optimized efficiency and cost-effectiveness Generate internal business cases, including projected ROI for CapEx spending justification in collaboration with Accounting Partners; as well as “preferred site” status for manufacturing based on costs, labor availability, and capacity utilization Utilize SolidWorks, CAD/CAM software packages for product DFM, and conceptualization of proposals Utilize and/or identify and Deploy software tools to facilitate data acquisition and analysis, such as Minitab, Sage, Flexsim, Paperless parts or similar Requirements: Bachelor's degree in Engineering (Mechanical, Industrial engineering, Systems engineering, Value engineering) Minimum of 5 years of experience in value engineering, industrial engineering, manufacturing costing, and related role in the manufacturing industry, with specific experience utilizing industry 4.0+ best practices and/or Lea Experience working for a Contract Manufacturer or OEM Strong engineering background with a solid understanding of manufacturing processes, materials, and equipment Knowledge, Skills and Abilities Required: Ability to identify the best possible manufacturing processes Proficiency in using SolidWorks or equipment CAD/CAM software packages for estimating and DFM purposes Experience in product level design for manufacture (DFM) Ability to collaborate across engineering Centers of Excellence for multi-plant vertically integrated proposals Interested in hearing more? Easy Apply now by clicking the "Quick Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Title: Senior Mechanical Project Engineer Overview Lead the design and delivery of complex industrial systems. This role blends hands-on engineering, project ownership, and team coordination across design, procurement, and installation. Key Responsibilities Own system design from concept through installation Create efficient solutions based on performance and space requirements Coordinate with engineering, controls, and field teams Manage timelines, budgets, and technical deliverables Lead design reviews and support installation efforts Mentor junior engineers and improve processes Requirements Engineering background (or equivalent experience) Experience with complex system design in industrial environments Familiarity with CAD/design tools Strong project management and communication skills Ability to handle multiple projects and occasional travel MUST HAVE – material handling conveyor experience Remote – East coast preferred, open to central 20% travel Compensation: $90-135k+ Determining compensation for this role (and others) at Vaco/Highspring depends upon a wide array of factors including but not limited to the individual’s skill sets, experience and training, licensure and certifications, office location and other geographic considerations, as well as other business and organizational needs. With that said, as required by local law in geographies that require salary range disclosure, Vaco/Highspring notes the salary range for the role is noted in this job posting. The individual may also be eligible for discretionary bonuses, and can participate in medical, dental, and vision benefits as well as the company’s 401(k) retirement plan. Vaco by Highspring values a diverse workplace and strongly encourages women, people of color, LGBTQ+ individuals, people with disabilities, members of ethnic minorities, foreign-born residents, and veterans to apply. EEO Notice Vaco by Highspring is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race (including but not limited to traits historically associated with race such as hair texture and hair style), color, sex (includes pregnancy or related conditions), religion or creed, national origin, citizenship, age, disability, status as a veteran, union membership, ethnicity, gender, gender identity, gender expression, sexual orientation, marital status, political affiliation, or any other protected characteristics as required by federal, state or local law. Vaco by Highspring and its parents, affiliates, and subsidiaries are committed to the full inclusion of all qualified individuals. As part of this commitment, Vaco by Highspring and its parents, affiliates, and subsidiaries will ensure that persons with disabilities are provided reasonable accommodations. If reasonable accommodation is needed to participate in the job application or interview process, to perform essential job functions, and/or to receive other benefits and privileges of employment, please contact HR@vaco.com . Vaco by Highspring also wants all applicants to know their rights that workplace discrimination is illegal. By submitting to this position, you agree that you will be giving Vaco by Highspring the exclusive right to present your as a candidate for the foregoing employment opportunity. You further agree that you have represented information about yourself accurately and have not affirmatively misrepresented your qualifications. You also agree to maintain as confidential, to the fullest extent permitted by law, any information you learn from Vaco by Highspring about the position and you will limit disclosure of information about the position only to the extent necessary to perform any obligations in furtherance of your application. In exchange, Vaco by Highspring agrees to exercise reasonable efforts to represent you through all solicitation, job screening and resume dispersal. Privacy Notice Vaco by Highspring and its parents, affiliates, and subsidiaries (“we,” “our,” or “Vaco by Highspring”) respects your privacy and are committed to providing transparent notice of our policies. California residents may access Vaco by Highspring HR Notice at Collection for California Applicants and Employees here. Virginia residents may access our state specific policies here. Residents of all other states may access our policies here. Canadian residents may access our policies in English here and in French here. Residents of countries governed by GDPR may access our policies here. Pay Transparency Notice Determining compensation for this role (and others) at Vaco by Highspring depends upon a wide array of factors including but not limited to: the individual’s skill sets, experience and training; licensure and certification requirements; office location and other geographic considerations; other business and organizational needs. With that said, as required by local law, Vaco by Highspring believes that the following salary range referenced above reasonably estimates the base compensation for an individual hired into this position in geographies that require salary range disclosure. The individual may also be eligible for discretionary bonuses.

Job Description COMPANY CULTURE Our focus is to deliver world-class solutions to our customers, on time and of the highest quality as the preferred supplier of highly engineered, energetic, and pyrotechnic devices while developing our associates and maximizing long-term value for our shareholders through organic growth and targeted acquisitions. GENERAL STATEMENT OF DUTIES: An individual who under moderate supervision applies standard procedures to perform a variety of component assembly tasks, ensuring products meet our high standards. ESSENTIAL DUTIES AND RESPONSIBILITIES: • An Assembler is an individual who under moderate supervision applies standard procedures to perform a variety of component assembly tasks, ensuring products meet our high standards, • Assembles components in accordance with drawings and operation sheets., • Responsible for weighing, loading and pressing operations., • Handle tooling and fixtures / use various hand tools to produce or modify parts., • Maintains count and order progress and logs in time / quantities., • Closes and assembles units (use of crimping and closure tools and epoxy applications)., • Soldering tasks, i.e. small wire soldering, terminal soldering, bridge wire welding., • Assists with the packaging of pyrotechnic assemblies where required., • Follows required company safety practices and quality procedures., • Follows procedures as defined by CAD policies, procedures and ISO9001 requirements. Maintains confidentiality of all information processed., • Perform other related duties as assigned. PHYSICAL DEMANDS: While performing the duties of this job, the employee is occasionally required to stretch, bend, kneel and stoop. The employee is regularly required to walk, communicate, and reach with hands and arms. The employee is frequently required to sit, stand, and use hands to finger, handle, or feel. The employee must occasionally lift and/or move up to 50 pounds using appropriate moving devices. Specific vision abilities required by this job include close vision, color vision, depth perception and ability to adjust focus. WORK ENVIRONMENT: While performing the duties of this job, the employee is regularly exposed to solder, fluxes, cleaners, epoxies, and masking agents while using appropriate personal protective equipment. Works in a temperature controlled environment. The noise level in the environment is usually low to moderate. DISCLAIMER The above information on this description has been designed to indicate the general nature and level of work performance by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to this job. Cartridge Actuated Devices is an Equal Opportunity Employer and encourages the application of female, minority, disabled, and veteran candidates. Due to the potential for exposure to ITAR controlled data, the incumbent in this role must be a US Person (US Citizen or US Permanent Resident). Due to the nature of our products, To the extent applicable to an employee's role, each employee must be able to obtain (and maintain) the ATF Possessor License as a condition of employment. Employment with Cartridge Actuated Devices is contingent upon the successful completion of a background investigation, including any required Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF) screening, and drug screening, as permitted by applicable law. The background investigation may include verification of employment history, education, criminal records, ATF-mandated checks, and other relevant information to determine suitability for employment. The drug screening will be conducted in accordance with state and federal regulations. Failure to successfully pass the background check, ATF screening, or drug screening, or the provision of false or misleading information during the application process, may result in withdrawal of a job offer or termination of employment. By proceeding with the application process, you acknowledge and consent to the background, ATF, and drug screening requirements as described above.

Salary: $ 150,000.00 We have partnered with a large Civil Engineering company in the Elmwood Park, NJ area to provide them with a Senior Transportation Engineer. Please review the description below and let us know if you are interested. Prioritized Must Have Skills for the Senior Transportation Engineer: #1. Must have a PE License in either NJ or NY #2. Must have a minimum of 5+ years of transportation design experience. Highway/roadway design experience a plus. #3. Must be proficient with CAD/Design Software (AutoCAD, MicroStation, Civil 3D, Inroads/Openroads) and able to assist. #4. No more than 3 jobs in the past 10 years. Responsibilities of the Senior Transportation Engineer: • Executes required aspects of roadway engineering based on a solid understanding of engineering fundamentals and advanced concepts., • Responsible for the design of roadway horizontal and vertical geometry, • Design Maintenance of Traffic (MOT / MPT) plans and specifications, • Coordinates a multi-disciplinary team to deliver projects and tasks., • Coordinates and reviews the work of the project team comprised of engineers, and technicians., • Assist project manager with technical and management collaboration., • Collaborate with project manager for project progress and status reports, schedule, and budget., • Tracks the progress of deliverables, client reviews, technical input, and comment resolution., • Assist project manager with scope and fee for projects., • Prepare administrative, technical, or statistical reports on traffic-operation matters, such as accidents, safety measures, or pedestrian volume or practices., • Evaluate transportation systems or traffic control devices or lighting systems to determine need for modification or expansion., • Support and participate in the development and mentorship of staff. Requirements of the Senior Transportation Engineer: • Bachelor's degree in civil engineering is required, emphasis in transportation preferred., • Professional Engineer License in New York and/or New Jersey is required, or ability to obtain within 6 months., • Minimum 5+ years of transportation design experience. Highway/roadway design experience a plus, • Strong written and verbal communication skills., • High attention to detail and accuracy., • Proficient with CAD/Design Software (AutoCAD, MicroStation, Civil 3d, Inroads/Openroads) and able to assist others as needed., • Proficient in Microsoft Office Suite., • Ability to travel to job sites. Other Key Requirements: • Work on-site., • No sponsorships or visa holders. No Corp-to-Corp. Benefits of the Senior Transportation Engineer: • Medical Insurance, • Dental Insurance, • Vision Plan, • Life Insurance, • 401k with company match About Relevante, Inc. - the Recruiting Firm Representing the Client for this Job Relevante is an Outplacement Services and Direct Hire recruiting firm. We help our clients provide a soft landing for existing employees, consistent with their statement of values. We also help leading companies find the best talent for their mission critical positions. Our Clients are some of the best companies to work for in the US. Relevante has been consistently identified as one of the most innovative Outplacement Services and Recruiting firms. To stay connected with our network, please follow us on LinkedIn https://www.linkedin.com/company/relevante.

YU & Associates, Inc., an awarding winning engineering firm located in Elmwood Park, New Jersey is seeking a Senior Transportation Engineer to join our team. The successful candidate will manage, organize, design, and execute highway, roadway, and other Civil Engineering projects. Responsibilities: • Executes required aspects of roadway engineering based on a solid understanding of engineering fundamentals and advanced concepts., • Responsible for the design of roadway horizontal and vertical geometry, • Design Maintenance of Traffic (MOT / MPT) plans and specifications, • Coordinates a multi-disciplinary team to deliver projects and tasks., • Coordinates and reviews the work of the project team comprised of engineers, and technicians., • Assist project manager with technical and management collaboration., • Collaborate with project manager for project progress and status reports, schedule, and budget., • Tracks the progress of deliverables, client reviews, technical input, and comment resolution., • Assist project manager with scope and fee for projects., • Prepare administrative, technical, or statistical reports on traffic-operation matters, such as accidents, safety measures, or pedestrian volume or practices., • Evaluate transportation systems or traffic control devices or lighting systems to determine need for modification or expansion., • Support and participate in the development and mentorship of staff.Requirements:, • Bachelor's degree in civil engineering is required, emphasis in transportation preferred., • Professional Engineer License in New York and/or New Jersey is required, or ability to obtain within 6 months., • Minimum 5+ years of transportation design experience. Highway/roadway design experience a plus, • Strong written and verbal communication skills., • High attention to detail and accuracy., • Proficient with CAD/Design Software (AutoCAD, MicroStation, Civil 3d, Inroads/Openroads) and able to assist others as needed., • Proficient in Microsoft Office Suite., • Ability to travel to job sites. We offer employees competitive compensation packages, medical/dental/vision, life insurance, short, and long-term disability, paid holidays, paid time off, and 401k retirement plan with company match. YU & Associates' is an Equal Employment Opportunity employer fully committed to providing equal opportunity in all areas of employment practices. No employee or applicant for employment is discriminated against because of race, creed, color, religion, gender, gender identity or expression, sexual or affectional preference, sexual orientation, sex, ancestry or national origin, citizenship status, age, disability, marital or domestic status, veteran status, atypical hereditary cellular or blood trait, genetic information or testing, or any other legally protected category in all employment decisions. We foster a work environment that's inclusive as well as diverse, where our employees can be themselves. Every idea and perspective are valued to meet our common goals. YU & Associates is committed to supporting our employees' well-being by providing benefits that are a valuable part of the compensation package. We partner with our employees to foster a healthy, safe and rewarding lifestyle both at work and at home. The Y&A benefits program for full-time employees include: • Benefits:, • Medical-National plan with low out of pocket costs to members., • Dental-National plan., • Vision-National plan with the largest vision network., • Life/AD&D-Benefit available should an employee pass away while employed., • Short-Term Disability-Benefit in the event an employee is unable to work for a short period of time., • Long Term Disability-Benefit in the event an employee is unable to work for an extended period., • Employee Assistance Program-Employee 3rd party support available when needed., • ADP Retirement Plan with company match., • Bonus Program - based on individual and company performance., • Yearly review - based on individual and company performance.Tax Savings Tools:, • Healthcare Reimbursement Accounts-Tax Free benefit to employees., • Flexible Spending Accounts-Tax Deductible benefit for employees., • Dependent Care and Commuter Program-Tax Deductible benefit for employees.Value Adds:, • Will Preparation, • Beneficiary Grief Support SALARY RANGE: $105,000 TO $120,000

Job Description Employment Type: Full-Time (non-exempt) Location: Fairfield and Byram, NJ Schedule: Monday-Friday, 7:00 AM - 5:00 PM Note: This role is on-site only (not remote or hybrid). Department: Logistics Reports to: Logistics Operation Manager Pay rate: $19.00-$23.00 per hour Job Summary: Receives, stores, and issues raw materials & finished parts, equipment, and other items from stockroom. Perform business system updates and maintain stockrooms in orderly manner. Works in both Fairfield and Byram locations. Primary Responsibilities: • Receives new materials and parts into stock. Verifies part number and quantity., • Pulls items to support both customer orders & stock orders IAW Bill of Materials., • Picks packs & deliver small parcel orders to production., • Identifies factory stock items for reorder., • Maintains inventory by performing cycle counts, making adjustments as required, maintaining location integrity and receiving and issuing inventory on a first in first out (FIFO) basis., • Assists planners & customer service in expediting orders., • Marks/labels parts with identifying information., • Maintain stockroom layout for most efficient usage., • Acts as one of several 'drivers' to pick up/deliver parts to/from vendors or our Byram facility., • Adheres to safety practices and procedures., • Follows procedures as defined by CAD policies, procedures, and ISO9001:2015 requirements. Maintains confidentiality of all information processed., • Learns shipping/receiving duties., • Adheres to the Controlled Unclassified Information (CUI) policies and procedures related to NIST 800-171 and completes all required CUI Awareness training, which includes collection, processing/handling, transmission, storage, and general safeguarding practices. Requirements/Qualifications: • (Physical Demands) While performing the duties of this job, the employee is regularly required to stand. The employee frequently is required to talk or hear. The employee is occasionally required to walk; sit; use hand to finger, handle, or feel; and reach with hands and arms. The employee must occasionally lift and/or move up to 75 pounds. Specific vision abilities required by this job include close vision, depth perception and ability to adjust focus., • (Work Environment) The employee is occasionally exposed to moving mechanical parts. The noise level in the work environment is usually moderate., • Subject Matter Understanding. Records Management. Inventory., • High School Diploma or a General Educational Development Diploma (GED). Must pass the ATF Background check., • Preferred: One to two years experience in a stockroom/stores environment. Working knowledge of Microsoft Windows and Microsoft Office Suite. Exposure to an MRP (JDEdwards/FIBS) Business System

Location US-NJ-Fairfield Positions 1 Category Manufacturing At a Glance Legrand has an exciting opportunity for a Sr. Manufacturing Engineer to join the Audio Video Division in Fairfield, NJ. The Sr. Manufacturing Engineer will provide day to day support on products being built in the manufacturing assembly area(s). This would include working with the assembly team in the identification of continuous improvement ideas that utilize lean manufacturing principles. These improvements would target processes and procedures that will enhance the quality and repeatability of the assembly process and increase productivity. What Will You Do? Identify process and assembly improvements and work with a senior engineer to implement improvement ideas into the manufacturing area using lean manufacturing principles • Provide troubleshooting support to the manufacturing floor, • Create and maintain manufacturing processes and procedures, • Provide input on the design of new product line assembly cells and implement their setup, • Provide process and procedural training to assembly personnel, • Participate in new product design reviews to identify design for manufacturability (DFM) issues and opportunities, • Review assembly documentation for accuracy through ECO reviews, • Work with packaging vendors to design custom packaging solution for high volume assemblies, • Design and implement assembly fixtures that will increase efficiencies on the manufacturing floor, • Provide Return on Investment (ROI) justification on capital expenditures, • Understand workplace hazards and take steps to proactively prevent and report hazards or injuries in the workplace. Cooperate in Safety Programs, initiatives, and investigations., • Demonstrate our five core values of Integrity, Customer Responsiveness, Innovation, Passionate Contribution & Empowerment and Continuous Improvement Education and Experience: • Bachelor of Science degree in manufacturing, industrial or mechanical engineering or other related technical degree with a minimum of six (6) months engineering experience in a manufacturing environment; or combination of relevant education and experience, • 3D CAD work experience Required Knowledge, Skills and Abilities: • Excellent verbal and written communication skills, • Excellent troubleshooting and problem solving skills, • An understanding of lean manufacturing principles, • Ability to work in a team environment, • Proficient in the use of personal computers, internet and Microsoft Office suite of software including Word, Excel and Outlook (or related e-mail system), • Self-motivated with the ability to work with minimal supervision, • Excellent interpersonal skills, • Ability to interpret standards, specifications, procedures, drawings, etc., • Strong mechanical aptitude, • Ability to train and motivate employees at all levels, • Ability to make sound decisions within established guidelines, • Ability to demonstrate flexible and efficient time management and to appropriately prioritize workload based upon organization or department needs, • Be detail-oriented and have excellent follow-through skills, • Must possess high degree of professionalism, • Must be available for extended, varied work hours based on business need Preferred Knowledge, Skills and Abilities: • Experience with Solidworks, • Experience with SAP, • Labeling software experience, • Machine shop experience, • Multi-lingual (Spanish, Laotian, etc.) WORKING CONDITIONS/PHYSICAL DEMANDS: • While performing the duties of this job, the employee may be required to reach above shoulder level, reach below knee level, bend, stoop, squat/kneel, climb; and lift, push or pull 50 lbs. Must have the ability to make coordinated movements of the fingers and hands to grasp, manipulate, and to perform data entry on a keyboard., • Steel-toed shoes are required for working in this position, • Combination general office and regular shop assembly/distribution center environment (no air conditioning), • May require regular ground travel to other company facilities within local metropolitan area, • Long-distance or air travel as needed - not to exceed 5% travel About Legrand Legrand is the global specialist in electrical and digital building infrastructures. Our comprehensive offering of solutions for residential, commercial, and data center markets makes us a benchmark for customers worldwide. We harness technological and societal trends with lasting impacts on buildings with the purpose of improving life by transforming the spaces where people live, work, and meet with electrical and digital infrastructures and connected solutions that are simple, innovative, and sustainable. Legrand is a global, publicly traded company listed on the Euronext (Legrand SA EPA: LR). For more information, visit www.legrandgroup.com/en About Legrand North and Central America Legrand, North & Central America (LNCA) is a leader in the AV, Lighting & Controls, Electrical, and Data Center markets. LNCA offers comprehensive medical, dental, and vision coverage, as well as distinctive benefits like a high employer 401K match, paid time off (PTO) and holiday pay, short-term and long-term disability benefit plans, above-benchmark paid maternity and parental leave, bonus opportunities in accordance with the Company's incentive plans, paid time off to volunteer, and an active/growing Employee Resource Group network. For more information, visit legrand.us About Legrand's Audio Video (AV) Division Legrand AV is a global leader in designing and manufacturing electrical, data, and AV solutions. For their customers worldwide, Legrand AV is focused on providing the foundation for amazing AV experiences through innovative solutions and exceptional service that solve their customers' AV integration and technology challenges. Today and tomorrow are about keeping people connected. Legrand and the AV industry are uniquely positioned to deliver just that. Legrand AV solutions support technology to rebuild and maintain vital connections around the world. The tenacity and determination to stay connected, no matter what it takes is proof that nothing will stop Legrand AV's pursuit for life. Despite the challenges, people have adapted and found ways to collaborate, to meet, to greet, to teach, to learn. http://www.legrand.us http://www.youtube.com/legrandna http://www.linkedin.com/company/44580 http://twitter.com/legrandNA Equal Opportunity Employer

Location US-NJ-Fairfield Positions 1 Experience (Years) 2 Category Engineering At a Glance Legrand has an exciting opportunity for a Design Engineer to join the Audio Video Division in Fairfield, NJ. This position is responsible for the design, development, and transition to production of consumer directed, aesthetically-pleasing, innovative, cost-effective and reproducible designs of furniture, mounts and accessories for the audio-visual industry. This position is responsible for participating on cross-functional development teams for the purpose of ensuring high integrity designs through effective use of appropriate analytical tools and techniques. What Will You Do? Design aesthetically-pleasing, functional and manufacturable customer driven, innovative products. • Responsible for assisting Marketing team members by providing leadership, guidance and education to both internal and external customers on product features, advantages and benefits stemming from the designs., • Effectively interface with engineers, designers, technicians, manufacturing engineers, and suppliers to meet project commitments., • Effectively influence and communicate between internal departments to manage projects., • Participate in developing project plans, test plans, and writing test reports; assist with creating, maintaining, and revising product project plans and effectively communicate project deadlines., • Create product documentation: solid modeling of components and assemblies, technical drawings, BOM's and ECO's., • Participate in and/or lead cross-functional teams for the associated product lines., • Provide new product training to Marketing, Customer Service, Sales and others., • Provide technical product support to customers., • Learn and expand personal knowledge of the industry, competitors and the customers, through trade show attendance and direct and indirect customer interaction, to competitively enhance and grow the Company's product capabilities., • Represent Company at trade shows, trade association and client meetings to promote products and services., • Understand workplace hazards and take steps to proactively prevent and report hazards or injuries in the workplace. Cooperate in Safety Programs, initiatives, and investigations., • Demonstrate our five core values of Integrity, Customer Responsiveness, Innovation, Passionate Contribution & Empowerment and Continuous Improvement. Required Skills Essential Knowledge, Skills and Abilities Required: • Ability to interpret standards, specifications, procedures, drawings, etc.; mechanical aptitude., • Effective project planning and execution skills; ability to multi-task and manage several projects at once., • Need to be a flexible and adaptable facilitator between internal departments across brands and regions, to improve project time, design, and/or communications., • Must possess high level of enthusiasm, strong integrity, keen customer service, excellent organizational skills and excellent collaboration and interpersonal skills., • Desire to work in team environment as project leader or as an individual contributor., • Be detail-oriented and have excellent follow-through skills., • Excellent verbal and written communication skills., • Must be able to function in a deadline driven environment., • Must have the ability to make recommendations to effectively resolve problems or issues, by using judgment that is consistent with standards, practices, policies, procedures, regulation or government law., • Must possess high degree of professionalism., • Computer literate (MS Office, e-mail, etc.). Minimum Education and Experience Required: • Bachelor of Science degree in mechanical engineering or other related technical degree with a minimum of two (2) years' experience as a mechanical design engineer in a manufacturing environment; or combination of relevant education and experience., • 3D CAD work experience. Preferred Qualifications: • Experience in consumer driven product design., • DFMEA and FEA experience., • Experience with SolidWorks., • Electrical or controls experience., • Experience working with multiple disciplines, including electrical and mechanical design, layout, manufacturing, external suppliers and service providers., • UL, TUV and/or CE experience., • Experience with SAP. Working Conditions/Physical Demands: • While performing the duties of this job, the employee is required to sit, stand, stoop, kneel, bend, twist, reach, push, pull, and make coordinated movements of the fingers for using a keyboard., • Ability to lift up to 50 pounds for product testing and tradeshow purposes., • Combination of general office and machine shop environment., • May require ground travel to other company facilities within local metropolitan area., • Long-distance or air travel as needed - not to exceed 15% travel. Salary Range: $85,000 - $100,000/annually About Legrand Legrand is the global specialist in electrical and digital building infrastructures. Our comprehensive offering of solutions for residential, commercial, and data center markets makes us a benchmark for customers worldwide. We harness technological and societal trends with lasting impacts on buildings with the purpose of improving life by transforming the spaces where people live, work, and meet with electrical and digital infrastructures and connected solutions that are simple, innovative, and sustainable. Legrand is a global, publicly traded company listed on the Euronext (Legrand SA EPA: LR). For more information, visit www.legrandgroup.com/en About Legrand North and Central America Legrand, North & Central America (LNCA) is a leader in the AV, Lighting & Controls, Electrical, and Data Center markets. LNCA offers comprehensive medical, dental, and vision coverage, as well as distinctive benefits like a high employer 401K match, paid time off (PTO) and holiday pay, short-term and long-term disability benefit plans, above-benchmark paid maternity and parental leave, bonus opportunities in accordance with the Company's incentive plans, paid time off to volunteer, and an active/growing Employee Resource Group network. For more information, visit legrand.us About Legrand's Audio Video (AV) Division Legrand AV is a global leader in designing and manufacturing electrical, data, and AV solutions. For their customers worldwide, Legrand AV is focused on providing the foundation for amazing AV experiences through innovative solutions and exceptional service that solve their customers' AV integration and technology challenges. Today and tomorrow are about keeping people connected. Legrand and the AV industry are uniquely positioned to deliver just that. Legrand AV solutions support technology to rebuild and maintain vital connections around the world. The tenacity and determination to stay connected, no matter what it takes is proof that nothing will stop Legrand AV's pursuit for life. Despite the challenges, people have adapted and found ways to collaborate, to meet, to greet, to teach, to learn. http://www.legrand.us http://www.youtube.com/legrandna http://www.linkedin.com/company/44580 http://twitter.com/legrandNA Equal Opportunity Employer

Job Description Experienced Physician Assistant or Nurse Practitioner opportunity with a large New Jersey Cardiology Group in Essex County. Nice mix of seeing patients in clinic and hospital rounding. NO CALL. Great opportunity for a Provider that is ready for the move from Primary Care to Specialty Medicine. About the Cardiology NP or PA opportunity • Team of 25 Cardiologists including Electrophysiologists and 12 PAs/ NPs, • Six office locations throughout New Jersey, • See 20-24 patients over clinic day, • New patients evaluations and consults are 40 minutes and follow up visits are 20 minutes, • Patients with Hypertension, CHF, CAD, Arrhythmia, • Examine and treat patients, order diagnostic testing ( Nuclear Stress Testing, Exercise Stress Test, Echocardiogram) and Lab evaluation., • Manage patients in office for EP testing with Cardiologist, • EMR is Athena, • Each Provider has Medical Assistant to room patients and help with EMR, • RN in each office to help with testing and lab ordering and follow up, • Hospital Rounding at Overlook Medical Center and Cooperman Barnabas for one week every 2 months Requirements of the Cardiology NP or PA opportunity • National Certification complete, • Over one year of experience in Cardiology or Internal Medicine (with strong Cardiology leaning), • New Jersey State Medical License, • Cardiology experience or proven focus during training or job like attending conferences, Preceptorship, electives, • Enjoy a fast paced office environment, • Comfortable with Hospital Rounding, • Strong experience with EKG interpretation, • Great note taking and EMR proficiency, • Easy commute to office for rounding week Perks of the Cardiology NP or PA opportunity • Base Salary is $120,000-145,000 annual, • Health Insurance (Select from 3 plans), • Dental and Vision Insurance, • Health Savings Account, • Life Insurance, • Short and Long Term Disability, • CME- 5 days and $1,500, • Tuition reimbursement, • All Licenses and fees covered, • Malpractice coverage, • 401K (4%), • 10 National Holidays, • 23 days of PTO at start Lynda Gregg, PA 904-452-4499 linkPAs.com

Description TIG Welder Location: Fairfield, NJ Employment Type: Full-Time About the Role TiFab is seeking a skilled TIG Welder with experience in stainless steel and nickel alloys who is eager to expand into titanium welding. In this role, you'll support both defense and commercial customers by producing high-spec welds that meet stringent quality and industry standards. This is precision-driven, hands-on work with opportunities to earn advanced certifications-including titanium qualification. What You'll Do • Perform TIG welding in all positions on stainless steel, nickel alloys, and titanium (training provided), • Pass TiFab's TIG welding assessment and qualify for required alloy and joint configurations, • Set up and lay out welding jobs using CAD drawings, fixtures, and diagrams, • Follow ASME and NAVSEA welding procedures and specifications, • Use rotary turntables, positioners, purge setups, and related tools, • Read and interpret drawings, weld symbols, and written instructions, • Pre-clean weld areas using acetone, grinders, and flapper wheels, • Tack weld and fabricate basic fixtures to support welding operations, • Maintain a clean, organized, and safety-compliant work area, • Perform basic maintenance on welding equipment Must-Have Skills and Experience • Strong manual TIG welding ability, • Proficiency reading blueprints and weld symbols, • Experience welding stainless steel and nickel alloys, • Ability to pass a TIG welding assessment, • Physical ability to stand, walk, and perform repetitive hand motions, • High school diploma or GED, • Authorized to work in the U.S. Nice-to-Have Skills • Experience welding titanium, • NAVSEA or ASME welding experience, • General fabrication experience, • Experience with purge setups or high-spec welding environments, • Background in aerospace or defense welding Who You Are • Detail-oriented with strong hand-eye coordination, • Committed to cleanliness, precision, and strict quality standards, • Comfortable working independently while knowing when to ask questions, • Safety-focused and collaborative, • Motivated to develop new welding capabilities, including titanium Additional Details • Salary Range: Starting at $22-26 per hour (+$2 for titanium plate qualification), • Shift: Mon-Thurs (6:30 AM - 3:30 PM), Fri (6-hour shift), • Travel: Occasional travel for commercial jobs (per diem available), • Benefits: Medical, dental, vision, 401(k), PTO

Job Description With over 40 years of industry leadership, CP Engineers delivers innovative solutions in site/civil, water/wastewater, municipal, MEP, and environmental engineering. Our diverse portfolio spans private, municipal, county, and regional clients—many of whom have partnered with us for decades. Join a fast-growing team dedicated to technical excellence, client satisfaction, and professional growth. Remote work flexibility, competitive compensation and benefits, and a supportive culture have helped CP earn Best Places to Work in NJ awards for three years straight and have driven strong employee retention. Position Overview: CP Engineers is seeking a highly skilled Senior Mechanical Engineer to provide technical leadership and mentorship within our mechanical engineering team. This role is responsible for developing project scopes, preparing budget estimates, and overseeing mechanical design work to ensure the delivery of high‑quality, accurate, and consistent engineering outputs across the organization. The Senior Mechanical Engineer will review, sign, and seal mechanical drawings and will also contribute hands‑on design support as required. Project work may include mechanical systems for commercial and industrial buildings, water and wastewater pump stations, treatment facilities, and various municipal infrastructure projects. Technical & Design Responsibilities: • Lead mechanical engineering design for HVAC, plumbing, and mechanical systems across commercial, industrial, municipal, and infrastructure projects., • Perform mechanical calculations, equipment selections, system sizing, and detailed technical analyses., • Prepare and seal engineering drawings, specifications, and reports in accordance with state PE requirements., • Conduct system modeling (e.g., energy modeling, load calculations) to optimize system performance., • Review and approve design documents prepared by junior engineers and CAD staff., • Ensure all designs meet applicable codes (IMC, IPC, NFPA, ASHRAE, OSHA, local/state regs)., • Process design experience a plus., • Experience working with gas systems, generators, fire suppression systems, cleanrooms, storage tanks, oil water separators a plus. Project Delivery & Coordination: • Serve as the mechanical discipline lead on multi‑disciplinary project teams, coordinating closely with electrical, structural, civil, and water resources groups., • Develop complete plan sets, technical specifications, and bid/construction documents., • Support construction-phase services: respond to RFIs, review submittals, conduct field inspections, issue punch lists, and prepare site visit reports., • Participate in value engineering, feasibility studies, and system evaluations for renovation and new construction projects. Quality & Compliance: • Maintain compliance with firm-wide QA/QC procedures., • Review design deliverables for technical accuracy, constructability, and regulatory compliance., • Verify that designs meet safety, reliability, maintainability, and operational requirements., • Maintain up-to-date knowledge of emerging electrical codes, utility standards, and industry advances. Client Engagement & Business Support: • Meet with clients to define project scope, requirements, and technical expectations., • Provide technical guidance, recommendations, and solutions during planning and project execution., • Support proposal writing, project budgeting, and mechanical scope development., • Attend client meetings, presentations, and project interviews as required. Leadership & Mentoring: • Provide technical mentorship to junior mechanical engineers, EITs, and designers., • Support staff development through training on codes, design standards, and best practices., • Oversee workload distribution, task assignments, and schedule adherence for mechanical discipline tasks. Compensation: $115,000-$145,000 Requirements • Degree in Mechanical Engineering or equivalent from an accredited university., • Maintain active Professional Engineer (PE) license in NJ (or ability to obtain via reciprocity)., • Minimum 7-10 years of mechanical engineering experience, with a track record of leading, mentoring, or supervising other engineers., • Represent the firm at industry events, technical conferences, or professional association meetings as needed, • Excellent ability to review and critique designs and provide constructive guidance., • Strong verbal and written communication skills, high attention to detail, and the ability to work collaboratively in a team environment., • Understanding of construction processes and field coordination, with the ability to support field engineers when necessary., • A valid driver’s license and dependable transportation., • Must be proficient in AutoCAD Benefits • Flexible Work Options: Hybrid/remote work arrangements, • Work/Life Balance: Flexible hours, 20 days paid time off, • Financial Security: 401(k) with 4% company match, • Professional Growth: Tuition reimbursement, professional license and association fee coverage, • Comprehensive Health: Medical, dental, and vision insurance, • Supportive Culture: Commitment to employee well-being and career development

Job DescriptionAbout American Medical and Trade Institute American Medical and Trade Institute provides nationally recognized certification programs preparing students for high-demand careers in healthcare, public safety, and emergency response. We partner with high schools and organizations throughout North Jersey to deliver real-world training that leads to industry-recognized credentials. Position Overview We are seeking an experienced 9-1-1 Emergency Medical Dispatcher (EMD) or active 9-1-1 Police/Fire/EMS Dispatcher to teach our 9-1-1 / EMD certification program. This is an in-person instructional role located in North Jersey. Candidates must be able to teach on-site at partner school locations. This position is ideal for current or former emergency dispatch professionals who want to mentor and train the next generation of dispatchers and emergency responders. Required Qualifications (Please Read Carefully) Applicants MUST meet one of the following: Current or former 9-1-1 Emergency Medical Dispatcher (EMD) Current or former 9-1-1 Police Dispatcher handling emergency calls Current or former 9-1-1 Fire/EMS Dispatcher handling live emergency communications Experience must include real-time call-taking and dispatching of emergency incidents. Applicants without 9-1-1 dispatch experience will not be considered. Preferred (But Not Required) EMD Certification (NECI or equivalent) Experience using CAD systems Prior training or classroom instruction experience Teaching experience is not required. We are willing to train qualified emergency dispatch professionals to become instructors. Key Responsibilities Deliver engaging, structured 9-1-1 / EMD certification instruction Share real-world dispatch experience to prepare students for critical scenarios Ensure course delivery aligns with NECI standards and certification requirements Evaluate student performance and provide constructive feedback Maintain professionalism and uphold AMTI instructional standards Location Requirement This position is based in North Jersey. Candidates must be local to North Jersey and available for in-person instruction. Applicants located in South Jersey or outside commuting distance should not apply.

Job Description Overview Circet USA is the leading provider of Network Services in North America, and we're looking for talented professionals to join our team. We specialize in engineering and construction services delivering comprehensive solutions across Inside Plant, Outside Plant, and Wireless networks to meet the evolving infrastructure needs of our customers. With nearly 50 years of industry experience, we work with major telecom service providers, MSOs, cloud service providers, and utilities. At Circet USA, you'll have the opportunity to make an impact by helping to create customized solutions that address our clients' unique challenges. If you’re passionate about innovation and thrive in a dynamic environment, we’d love to hear from you. Circet USA’s benefits package includes the following: • Medical, Dental, and Vision insurance, • Digital Health & Wellness Support, • Critical Illness, Accident, & Hospital Insurance, • Short-term & Long-term disability, • Group term & Voluntary life insurance, • Flexible Spending and Health Savings Accounts, • Paid Time Off & 401K, • Company Discount Website Responsibilities We are seeking a highly skilled and experienced RF Engineer I - Staffing to fulfill a staff augmentation role with Circet USA’s customer. A RF Engineer is a professional who specializes in designing, developing, and testing radio frequency (RF) systems and components. RF engineers work with various communication systems, including cellular networks, satellite systems, and wireless technologies such as Wi-Fi and Bluetooth. Under the guidance of senior engineers, RF Engineers will assist in the design, development, testing, and troubleshooting of RF systems and components. This role offers an excellent opportunity to gain hands-on experience in RF technology while contributing to the innovation and success of our projects. A RF Engineer I (RF 1) must have a strong understanding of RF principles, such as frequency, modulation, and noise. Must also have a deep knowledge of antenna theory, microwave transmission, and propagation. ESSENTIAL DUTIES & RESPONSIBILITIES include the following. Other duties may be assigned: • Designing and testing RF systems: design and test RF systems, including antennas, filters, amplifiers, and transmitters. They use computer-aided design (CAD) tools to create and simulate designs., • Developing and optimizing wireless communication systems: responsible for developing and optimizing wireless communication systems, including cellular networks, satellite systems, and wireless technologies such as Wi-Fi and Bluetooth., • Conducting research and development: stay up-to-date with the latest technological advancements and conduct research and development to improve RF system, • Troubleshooting and problem-solving: responsible for troubleshooting and resolving any issues related to RF systems, such as signal interference and noise., • Collaborating with cross-functional teams: collaborate with cross-functional teams, including electrical engineers, software engineers, and product designers, to ensure the successful development and implementation of RF systems., • Documentation and reporting: document their designs, test results, and project progress, and report their findings to stakeholders. SAFETY DUTIES & RESPONSIBILITIES • Adhere to, promote, and accept personal responsibility for compliance to: Federal and Local Occupational Safety and Health Regulations Industry Consensus Standards Circet USA Injury and Illness Prevention Program Manual • Participate in job site safety/hazard analysis Qualifications EDUCATION, EXPERIENCE, and/or QUALIFICATIONS • Bachelor's or Master's degree in Electrical Engineering, Electronics Engineering, or a related field required., • 0-3 years of experience in RF engineering, with some exposure to designing and developing RF systems preferred., • Strong understanding of RF simulation tools and test equipment preferred., • Knowledge of RF principles, concepts, and theory., • Familiarity with RF simulation tools and test equipment., • Ability to work effectively in a team environment and communicate technical concepts., • Strong problem-solving and analytical skills., • Attention to detail and commitment to quality. Circet USA is an Equal Opportunity Employer - Veteran/Disabled. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status or other characteristics protected by law.

Job Description Lead ServiceNow Developer CMBD IRC GRC ITSM My name is Bill Stevens, and I have a new full time Lead ServiceNow Developer opportunity available for a major firm located in Troy Hills, New Jersey and Stamford, Connecticut that could be of interest to you, please review my specification below. The work schedule will be hybrid, three to four days a week onsite in the firms’ offices that is closest to the candidate's residence and either one to two days remote based on a five-day work week. This is NOT a remote role. The ideal candidate should also possess a green card or be of citizenship. No Visa entanglements and no H1-B holding company submittals. The firm is seeking a highly experienced Lead ServiceNow Developer to step into a critical role during a period of team transition. You will serve as the primary technical lead for our ServiceNow environment, taking ownership of a mature instance previously managed by a multi-person team. You will be responsible for stabilizing the platform, reverse-engineering existing logic without immediate access to historical knowledge holders and driving forward-looking development. Responsibilities: Full Stack Ownership: You will work closely with the platform owner and lead administrator to manage the application in its entirety, spanning maintenance, troubleshooting, and new feature development. Diverse Footprint: Our instance is not limited to IT; it includes robust deployments of IRM (GRC) and HRSD, alongside standard ITSM and CMDB structures. Core Responsibilities: Environment Stabilization & Discovery Conduct a rapid assessment of the current state of the instance to understand existing customizations, business rules, and workflows. As needed, be capable of reverse-engineering undocumented configurations and establish a baseline of technical documentation for the new team. As needed, troubleshoot legacy issues and stabilize performance following the team transition. Development & Engineering: Design and develop solutions across the platform, utilizing Client Scripts, Business Rules, UI Policies, UI Actions, and ACLs. Manage and maintain complex API integrations (REST/SOAP) between ServiceNow and third-party enterprise tools. Oversee the health and data integrity of the CMDB. Module Management (ITSM, IRM, HRSD): Maintain and enhance the ITSM suite (Incident, Problem, Change, Request). Provide specialized support for Integrated Risk Management (IRM/GRC) and Human Resources Service Delivery (HRSD) modules. As needed, configure Service Portal widgets and pages to ensure a seamless user experience. Leadership & Mentorship: Act as the Subject Matter Expert (SME) while the organization forms a permanent support structure. Guide and mentor junior developers or administrators joining the newly formed team. Qualifications: Required Technical Skills: 5+ years of hands-on ServiceNow development and administration experience. Proven track record of working independently in complex environments without heavy supervision. Deep expertise in JavaScript, Glide API, HTML, CSS, and Angular/Service Portal. Strong experience with Integration Hub, REST/SOAP APIs, and ETL processes. Demonstrated ability to troubleshoot complex workflows and identify root causes in heavily customized instances. Module Experience: Expert-level knowledge of ITSM and CMDB. High Priority: Functional and technical experience with IRM (Governance, Risk, and Compliance). High Priority: Functional and technical experience with HRSD (HR Service Delivery). Soft Skills: Forensic Mindset: The ability to look at existing code and understand why it was written that way without being able to ask the original author. Resilience: Comfortable working in a fluid environment where processes are being rebuilt. Communication: Ability to translate complex technical findings to non-technical leadership. Preferred Certifications: ServiceNow Certified Application Developer (CAD) Certified Implementation Specialist (CIS) – IRM or HRSD ITIL V3/V4 Foundation The interview process will include an initial phone or virtual interview screening. Please let me know your interest in this position, availability to interview and start for this position along with a copy of your recent resume.

Job Description Overview This position is primarily responsible for the set-up/ operation of various types of machine shop equipment inclusive of, but not limited to, manual and CNC Engine Lathes, Bridgeports and Grinders to produce complex tools, fixtures and diversified products in a safe, effective/efficient manner to meet operational requirements. This expertise will be applied in a proactive manner utilizing best practices when conducting documentation review, troubleshooting, continuous improvement, equipment set-up/operation and component inspection related activities. The incumbent must be an individual who can multi-task and perform various machine shop related activities which are to be conducted in a manner that complies with company requirements (i.e., regulatory, safety, administrative, etc.). This position requires effective interaction with a broad spectrum of people within the organization to successfully support operations and the corporate strategic vision. Skills and Experience: 5+ years of related experience involving set-up/operation of precision (high tolerance), machine shop equipment (Aerospace mfg. environment preferred) High School/(GED) Diploma or Vocational/Technical school equivalent Self-motivated individual who possesses the ability to analyze, organize, plan, multi-task and achieve results through effective interaction with others Possess math skills required to effectively and efficiently read, interpret documents (i.e., blueprints/technical drawings, operation/tool/set-up sheets, procedures, ECN’s, routers, etc.). Ability to interpret various types of graphs and data used in problem solving, SPC, monitoring of performance metrics, etc. Demonstrate effective verbal/written communication skills required for interacting with all levels of personnel within the organization Ability to set-up and operate machine shop equipment in a effective, efficient, safe and consistent manner Knowledgeable in the areas of Lean Manufacturing concepts, employee training, GT&D practices, interpretation of machine shop documentation (blueprints, ECN’s, operation/tooling sheets, routers, etc.), inspection methods, effective utilization of measuring equipment/instruments, root cause investigations, troubleshooting, and performance metrics Consistently demonstrate commitment to company values, strategic plan and vision Must demonstrate creative thinking as it relates to machine shop, inspection and assembly and test fixture manufacture and design input. Must be a US Citizen Additional Responsibilites: Bring initiatives and activities to closure in a timely manner through effective interaction with individuals, both internal and external to the Marotta organization (as required). Abide by all safety, quality, housekeeping and company policies/procedures to ensure compliance to all regulatory and internal system requirements. Contribute to a positive and cooperative work environment through effective communication at all levels internal and external to the organization Actively participate in team meetings, improvement initiatives/programs, etc. and support actions to drive company initiatives/goals Assist in the training of personnel to perform required technical tasks (as directed) Consistently demonstrate commitment to company values Keep management informed of area activities and of any significant problems. Assume responsibility for related duties as required or assigned. Ensure that work area is clean, secure, and well maintained. Complete special projects and miscellaneous assignments as required Work Enviroment: • While performing the duties of this job, the employee is frequently exposed to conditions typical of a manufacturing/machine shop environment, including, but not limited to: fluids, fumes or airborne particles, moving mechanical parts, noise and vibration, • This job interacts both in a professional office environment and a manufacturing/machine shop environment. This role uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines, as well as environments inclusive of the appropriate eye, hearing and foot protection (as required)., • Temperature of work environment may be affected by outside/external temperatures, machining processes, etc., • Overtime and weekend work may be required, as job duties demand., • No travel is expected for this position Physical Requirements: • While performing the duties of this job, the employee is regularly required to talk and hear., • The employee is frequently required to reach with hands and arms, and to use hands to finger, handle or feel, • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus., • The employee is regularly required to stand at length (7-8 hours, daily), sit, walk, stoop, bend, turn, balance, and/or crouch, and move about the facility., • The employee may be required to lift and/or move items weighing up to 40 pounds, and occasionally up to 70 lbs. Starting salary - $29-$30/hour (D.O.E.) This position is at our Montville, NJ office location. Many of our contracts require proof that you are a U.S. citizen and/or that an export license has been obtained for employees who are citizens of certain countries. Your employment, both initially and continually thereafter, is conditioned on production of such proof of citizenship and/or any export license that may be required to comply with any and all applicable laws, regulations, or executive orders, or required by Federal, State, or local government contracts. We offer a highly competitive compensation package for this outstanding position plus a quarterly bonus along with a full range of top quality benefits and employee services including: medical, prescription, dental, vision, life and disability income insurance programs, 401k retirement plans with company match, generous tuition aid program, paid vacation, sick and personal days, paid holidays and flexible work hours with compressed work week options.We recognize and reward our employee's accomplishments and host several employee engagement events per quarter. If you are looking to grow or accelerate your career and be part of a best in class organization while enjoying a work-life balance, please visit our website at www.marotta.com to learn more about us and to apply. Check out all our openings at https://marotta.com/job-openings/ We are an Affirmative Action and Equal Opportunity employer M/F/IWD/Veterans VETERANS ARE ENCOURAGED TO APPLY You should be proficient in: • GD&T, • G-Code, • M-Code, • Machine Setups for Production Runs, • Manual Machining Skills, • CAD/CAM Software, • Blueprint Reading, • Basic Computer Skills Machines & technologies you'll use: • CNC Mill (3-4 axis VMC) (Haas, Okuma, Dmg Mori Seiki), • CNC Swiss Lathe (Tsugami)

Job DescriptionThis is a temporary 6-month contracted W2 position. The pay range for this position is $40-$45/hr (depending on experience) • Interprets customer specifications to define requirements for mechanical designs., • Performs first principal analysis related to appropriate aspects of mechanical design., • Applies the 3D CAD system to create mechanical design and drawings., • Develops detailed fabrication and assembly drawings and performs tolerance analysis., • Develop prototypes for design evaluation., • Troubleshoot and resolve design & processing issues., • Contributes to details of design documentation using electronic documentation systems., • Collects, analyzes and interprets data to propose recommendations., • Develops & execute design verification protocols and technical reports., • Work with internal and external resources on fabrication, inspection, and testing of new product parts and assemblies., • Develop & debug prototype tooling / equipment and processes., • Develop test methods and fixtures., • Formulate plans & methods to accomplish assignments with appropriate oversight., • Works independently and prioritizes assigned tasks with guidance., • Contribute to project planning activities., • Train technicians and operators on new process techniques. Required Knowledge, Skills and Abilities: • Design for Manufacturability and Assembly, DFM&A (cost/tooling/process considerations), preferably using SolidWorks CAD software., • Understanding in design and development of injection molded plastic, plastic extrusion, casting, sheet metal, metal stampings, additive manufacturing processes, and machined metal components, and assemblies with high part counts highly desirable., • Knowledge of mechanical design and development using metric ANSI/ISO dimensioning and drafting standards highly desirable., • Understanding of GD&T, mechanical measurement and testing equip., and statistical analysis of test data., • Experience with electronic document control systems in medical device and/or medical equipment design and development., • Highly skilled at analytical reasoning, mechanism design, creative problem solving, and mathematical analysis., • Ability to create and meet scheduled timelines (manage and coordinate tasks as required)., • Ability to work in a team environment., • Strong communication skills., • Competent in use of Microsoft Office tools., • Ability to operate test equipment such as various pressure and flow measurement equipment, temperature/humidity chambers, PC-based data recorders, simulators, DVM’s and oscilloscopes., • Familiarity and the ability to operate basic shop equipment such as hand tools, a drill, and Dremel., • Understand & interpret simple wiring diagrams., • Familiarity with Agile Scrum & Waterfall project planning methods. Minimum Requirements • BS in engineering discipline, mechanical preferred., • Minimum 2-4 years related experience, or an MS and less than one year experience., • Experience with a solid modeling CAD program, preferably Solidworks., • Experience in medical equipment / device design with experience in electromechanical, electro-pneumatic, and/or blood pumping equipment development., • Knowledge in medical device industry regulations and practices – ISO 13485, ISO 7198 & GMP., • Proficiency with Microsoft Windows, MS Office applications, and Adobe Acrobat., • Experience with Microsoft Visio and Microsoft Project preferred.#LI-RS1 Important Notice: Protecting Your Information Medvacon Talent Acquisition only conducts initial video interviews via Microsoft Teams or Zoom. All communication will come from an email address ending in @medvacon.com. If you receive a message that seems suspicious or is not from our official domain, please report it immediately to jobs@medvacon.com. Powered by JazzHR MFNkCxrGcw

Job Description COMPANY CULTURE Our focus is to deliver world-class solutions to our customers, on time and of the highest quality as the preferred supplier of highly engineered, energetic, and pyrotechnic devices while developing our associates and maximizing long-term value for our shareholders through organic growth and targeted acquisitions. GENERAL STATEMENT OF DUTIES: The Aerospace Manufacturing Engineer is responsible for designing, developing, scaling, and optimizing manufacturing processes for aerospace products including Cartridge Actuated Devices (CAD) and Propellant Actuated Devices (PAD). This role involves working closely with design, quality, and production teams to ensure that manufacturing methods meet precise specifications, withstand certification standards, and maximize efficiency, safety, and quality. ESSENTIAL DUTIES AND RESPONSIBILITIES: The Aerospace Manufacturing Engineer duties and responsibilities encompass the development, validation, and optimization of manufacturing processes for aerospace components and assemblies including Cartridge Actuated Devices (CAD) and Propellant Actuated Devices (PAD). The Aerospace Manufacturing Engineer has the following responsibilities: • Process Development & Design:, • Develop and validate manufacturing processes for aerospace components, Cartridge Actuated Devices (CAD) and Propellant Actuated Devices (PAD), assemblies, and systems., • Design tooling, fixtures, and production equipment to improve efficiency and precision., • Apply process improvement methodologies to reduce waste and enhance productivity., • Product Quality & Compliance:, • Ensure manufacturing processes adhere to aerospace industry standards (e.g., AS9100, FAA requirements, etc.)., • Collaborate with quality teams to develop inspection and testing procedures to support customer requirements and standards., • Troubleshoot and resolve manufacturing issues related to quality or process deviations., • Design for Manufacturability:, • Work with product design teams to ensure components are designed for manufacturability and ease of assembly., • Provide feedback on design feasibility, manufacturability, and cost reduction opportunities., • Process Optimization & Automation:, • Analyze current manufacturing workflows and implement improvements., • Identify, implement and manage automation and new technology adoption in manufacturing., • Conduct time studies and process mapping to streamline operations., • Documentation & Standards:, • Create and maintain process documentation, Work Instructions, and SOPs., • Ensure all manufacturing activities are well-documented for traceability and certification purposes., • Cross-Functional Collaboration:, • Work closely with engineering, supply chain, safety, and production teams to meet project deadlines and quality standards., • Participate in design reviews, feasibility assessments, and production planning., • Continuous Improvement & Training:, • Lead continuous improvement initiatives to increase yield, reduce cycle time, and cost., • Train manufacturing operators and team members on new processes and equipment. PHYSICAL DEMANDS: Must possess sight/hearing senses or use prosthetics that will enable these senses to function adequately so that the requirements of this position can be fully met. Physical activity includes walking, standing, bending, squatting, reaching above shoulders and lifting up to 40lbs. Must be able to drive an automobile for short and long distances. The candidate for this position may have to spend long hours using a computer, which can cause eye strain. This position will have to manage a number of requests and situations at one time. Stress may be caused by the need to complete tasks within tight deadlines. WORK ENVIRONMENT: Performs office activities in a lighted and ventilated area. May be subject to changes in temperature and exposure to dust. Will be exposed to uncontrolled environmental conditions during driving. Will work in a normally acceptable office environment, with no abnormal hazards or risks. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Travel between two manufacturing sites, Byram NJ and Fairfield. QUALIFICATIONS, KNOWLEDGE, AND SKILLS: • Experience working with aerospace materials such as composites, titanium, aluminum alloys, Cartridge Actuated Devices (CAD) and Propellant Actuated Devices (PAD)., • Knowledge of Six Sigma, Lean Manufacturing, or other process improvement frameworks., • Ability to read and interpret engineering drawings and specifications., • Project management skills for leading process improvement projects., • Familiarity with ERP/MRP systems related to manufacturing., • Effective decision-making and strategic planning skills., • Strong knowledge of Microsoft applications: Word, excel, power point, share point., • Excellent analytical, organizational, and problem-solving skills., • Excellent communication and stakeholder management skills., • Ability to work effectively with management and cross functional team to meet critical deadlines., • Experience with compliance documentation and certification processes., • Ability to work under pressure and manage multiple tasks simultaneously., • Excellent interpersonal, negotiation, and communication skills. EDUCATION AND EXPERIENCE: • Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, Aerospace Engineering, or related discipline., • 5+ years of experience in aerospace manufacturing or a related high-precision manufacturing environment., • Knowledge of aerospace manufacturing processes such as machining, composite layup, welding, assembly, and NDT, Cartridge Actuated Devices (CAD) and Propellant Actuated Devices (PAD)., • Familiarity with aerospace standards (e.g., AS9100, NADCAP) and regulatory requirements., • Experience with CAD/CAM software, and manufacturing automation tools., • Strong problem-solving skills and analytical mindset., • Proven experience in aerospace component development, testing, or systems integration., • Strong understanding of aerospace design standards and regulations (e.g., AS9100, FAA, EASA)., • Strong understanding of defense mil specs for pyrotechnics and energetics design standards and regulations including but not limited to Mil-STD-1316, MIL-STD-2104, MIL-STD-2105, MIL-STD-1630, MIL-DTL-23659., • Proficiency in CAD software (CATIA, SolidWorks), simulation tools (ANSYS, MATLAB), and test equipment. DISCLAIMER The above information on this description has been designed to indicate the general nature and level of work performance by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to this job. Cartridge Actuated Devices is an Equal Opportunity Employer and encourages the application of female, minority, disabled, and veteran candidates. Due to the potential for exposure to ITAR controlled data, the incumbent in this role must be a US Person (US Citizen or US Permanent Resident). Due to the nature of our products, To the extent applicable to an employee's role, each employee must be able to obtain (and maintain) the ATF Possessor License as a condition of employment. Employment with Cartridge Actuated Devices is contingent upon the successful completion of a background investigation, including any required Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF) screening, and drug screening, as permitted by applicable law. The background investigation may include verification of employment history, education, criminal records, ATF-mandated checks, and other relevant information to determine suitability for employment. The drug screening will be conducted in accordance with state and federal regulations. Failure to successfully pass the background check, ATF screening, or drug screening, or the provision of false or misleading information during the application process, may result in withdrawal of a job offer or termination of employment. By proceeding with the application process, you acknowledge and consent to the background, ATF, and drug screening requirements as described above.

Job DescriptionDescription: About PrecisionX Group: PrecisionX Group is a leading provider of precision metal components, serving critical industries such as aerospace & defense, medical devices, satellite & space, electric vehicles, mining, and semiconductors. By uniting the specialized expertise of GEM, Coining, National Manufacturing, Ditron, MSK Precision Products, and Hudson Technologies we offer a comprehensive range of advanced manufacturing solutions. Our core capabilities include machining, deep drawing and progressive stamping, Swiss machining, micro stamping, and transfer press. Our team consists of over 600 employees, located in CT, NJ, NY, and FL. With our collective expertise, our strong foundation in metal manufacturing techniques, and a relentless focus on quality and innovation, PrecisionX Group is committed to delivering superior products and services that meet the evolving needs of our customers. Position Summary: This role is ideal for an engineer who is comfortable wearing many hats, solving urgent production issues, and working directly with toolmakers, CNC machinists, quality personnel, and production teams. The successful candidate will act as a technical problem-solver on the manufacturing floor, with a strong focus on progressive tooling, CNC manufacturing methods, root-cause analysis, quality improvement, and production support. This is not a desk-only engineering role. The position requires someone who can move between engineering, quality, the tool room, and production to identify problems, develop practical solutions, and keep manufacturing running efficiently. Essential Functions: To accomplish this job successfully, an individual must be able to satisfactorily perform each stated essential function, with or without reasonable accommodation. Reasonable accommodations may be made to help qualified individuals with disabilities perform the essential functions. Requirements: Key Responsibilities: 1. Manufacturing & Production Support: • Provide hands-on engineering support for day-to-day production issues., • Troubleshoot manufacturing problems related to tooling, CNC machining, part quality, and process stability., • Work directly with operators, toolmakers, machinists, and production supervisors to resolve urgent shop-floor issues., • Evaluate production methods and recommend improvements to increase efficiency, repeatability, and throughput., • Support corrective actions when production parts do not meet dimensional, cosmetic, or functional requirements., • Assist with setup optimization, process validation, and manufacturability improvements. 1. Tooling & Tool Room Support: • Support the tool room with troubleshooting and improvement of progressive tooling and related production tooling., • Assist in identifying tooling wear, failure modes, alignment issues, and design-related problems., • Recommend tool modifications, repairs, or process changes to improve part quality and tool life., • Collaborate with toolmakers to develop practical solutions for active production problems., • Review tooling designs and provide engineering input for improvements, maintenance, and manufacturability. 1. CNC & Manufacturing Engineering: • Help determine effective CNC machining approaches for production components, tooling, fixtures, and secondary operations., • Work with CNC machinists/programmers to improve machining strategy, fixturing, tooling selection, and process reliability., • Support fixture design, tooling concepts, and process development for machined components., • Analyze machining-related issues such as tolerance variation, tool wear, chatter, setup errors, and cycle-time inefficiencies., • Recommend improvements to CNC processes that support quality, cost, and delivery goals. 1. Quality Control & Continuous Improvement • Apply quality control experience to investigate dimensional issues, nonconformances, and customer concerns., • Support root-cause analysis and corrective/preventive action activities., • Use inspection data to identify trends and recommend engineering or process changes., • Work with Quality Control to ensure parts meet drawings, specifications, and customer requirements., • Assist in developing or improving inspection methods, control plans, work instructions, and process documentation., • Promote practical continuous improvement initiatives across engineering, tooling, CNC, and production 1. Documentation & Cross-Functional Communication: • Read and interpret engineering drawings, tolerances, specifications, and manufacturing documentation., • Create or revise work instructions, process notes, inspection criteria, and engineering documentation as needed., • Communicate clearly with shop-floor personnel, quality staff, engineering, and management., • Document technical findings, corrective actions, and recommended process improvements., • Support engineering change activities when tooling, process, or product updates are required. Non-Essential Responsibilities: • Performs other duties as directed. Position Qualifications And Competency Statements: • Regard for safety – Ability to follow safety rules and processes and keeps own safety and the safety of others in the forefront of every action., • Attitude – Ability to maintain a positive mindset towards achieving success and eagerness and willingness to accept and meet challenges., • Work Ethic – Ability to make decisions based upon ethical principles, considering how the choice will affect others, • Application of technical knowledge and skills – Ability to comprehend complex technical and specialized information., • Achieving results and problem solving – Ability to collect and analyze information, problem-solve, and make recommendation for decisions., • Accountability – Ability to accept responsibility and account for his/her actions., • Time and Priority Management – Ability to utilize the available time to organize, prioritize and complete work within given deadlines., • Communication – Ability to effectively communicate with others verbally and in writing. Skills And Abilities: Required Qualifications: • Bachelor’s degree in Manufacturing Engineering, Mechanical Engineering, Industrial Engineering, or related technical field preferred., • Equivalent hands-on manufacturing, tooling, CNC, or quality experience may be considered., • Experience in a manufacturing environment with direct shop floor involvement., • Working knowledge of progressive tooling, tool room operations, CNC machining, and production troubleshooting., • Quality control experience, including inspection methods, dimensional analysis, and corrective action support., • Ability to read and interpret mechanical drawings, GD&T, tolerances, and technical specifications., • Strong mechanical aptitude and practical problem-solving ability., • Comfortably working in a fast-paced production environment and responding to urgent issues., • Ability to communicate effectively with machinists, toolmakers, inspectors, operators, and management., • Proficiency with Microsoft Office and basic engineering documentation. Preferred Qualifications: • Experience with stamped, coined, precision metal, or small-component manufacturing., • Experience supporting progressive dies, punch tooling, fixtures, jigs, and production tooling., • CNC machining knowledge, including milling, turning, tooling selection, fixturing, and setup troubleshooting., • Familiarity with CAD software such as PTC Creo, AutoCAD, or similar., • Knowledge of GD&T and precision inspection equipment., • Experience with root-cause analysis tools such as 5 Why, fishbone diagrams, corrective actions, and process audits., • Exposure to ISO 9001, AS9100, IATF, or similar quality systems., • Experience in a high-mix, fast-paced manufacturing environment. Work Environment: This position involves working in a manufacturing environment that is adjacent to the shop work environment. The employee must be aware of potential hazards, including, but not limited to, working in close proximity to moving mechanical parts, operating vehicles, exposure to electrical current, high temperatures, and chemicals. It's important to maintain a high level of alertness and caution while performing tasks in this work environment.

Job Description At Acrow our work is a vocation, not a transaction. The Acrow team is committed to serving communities with passion and integrity. Our team members are drawn from diverse backgrounds, offering a variety of perspectives that help Acrow develop creative, innovative solutions in collaboration with our clients and stakeholders. With a global mindset and project experience in more than 150 countries, the Acrow team is proud to deliver on its shared mission of building bridges and connecting people, leaving a legacy of partnership and purpose. Location: Parsippany, NJ or Remote Senior Project Manager, Shoring Provide oversight and approval of drawings for the field assembly of prefabricated modular shoring systems. Prepare customer approved engineering calculations, technical drawings, field erection drawings, and bills of material using computer-aided-drafting (CAD) equipment and related design software. Duties and Responsibilities: • Develop, maintain and update standardized drawing packages, templates and related technical documentation to support engineering and project requirements., • Prepare, review and finalize engineering calculations in accordance with applicable codes, standards and project specifications., • Collaborate with internal teams and external stakeholders to develop engineered solutions for shoring and related structural applications., • Review and approve technical drawings used for the fabrication and field assembly of prefabricated modular systems, ensuring alignment with customer specifications, engineering requirements, drafting standards and applicable regulations., • Apply principles of engineering, construction methods, mathematics, materials and physical sciences to produce accurate technical drawings using U.S. Customary and/or Metric units., • Prepare and review bills of material associated with drawings, designs and project deliverables., • Revise drawings, calculations and documentation to address design updates, project changes, regulatory requirements, or client feedback., • Develop installation and removal procedures, including supporting drawings and written instructions for field implementation., • Review completed work for technical accuracy, completeness and compliance with company policies, engineering standards and quality requirements., • Prepare technical documentation and materials to support project execution, sales activities and customer communication., • Coordinate project requirements and technical support needs with Field Service Technicians, Project Managers and other internal stakeholders., • Participate in site visits or inspections of installed systems, as needed, to support project completion and documentation such as Certificates of Compliance., • Understand and adhere to all Acrow’s policies and applicable laws, • Travel to other Acrow Locations or Customer Sites as necessary, • Perform other duties as required Skills and Knowledge: • Knowledge of structural and temporary works design related to steel and concrete framing, including modifications, rehabilitation and erection activities., • Proficiency using AutoCAD LT or AutoCAD Mechanical (2018 or later) to produce and modify engineering and construction drawings., • Ability to read, interpret, and prepare structural and civil drawings, calculations, specifications and technical documentation., • Working knowledge of applicable industry codes and standards, such as AASHTO, AISC, OSHA, and SSFI and the ability to apply them to project work., • Understanding of construction methods, materials, drafting standards, symbols and dimensioning practices commonly used in engineering and construction environments., • Familiarity with pre-engineered and modular shoring systems utilized in heavy civil or infrastructure construction projects., • Ability to collaborate with internal teams and external stakeholders, including consulting engineers, transportation agencies, sales teams, and customers, to ensure drawings and technical deliverables meet project requirements., • Ability to manage multiple assignments, prioritize tasks and meet established deadlines in a fast-paced project environment., • Demonstrated communication, organization, analytical, and problem-solving skills in a collaborative team setting., • Proficiency using Microsoft Windows based systems and Microsoft Office applications, including Outlook, Word, Excel, and PowerPoint. Minimum Education and Experience: • Bachelor’s degree in Civil, Structural or Construction Engineering and 8 to 10 years’ industry experience in design-related discipline or a combination of education, skills, and experience Preferred Skills and Knowledge: • Professional Licensure in one or more States Working Conditions: • Work is typically performed in an office environment which requires proper safety precautions. Work requires occasional physical effort in the handling of materials, boxes, or equipment. Benefits: • The Company offers a comprehensive benefits package which includes medical, dental, vision and life insurance; paid time off; holidays; retirement plan participation; voluntary long-term disability, supplemental life, hospitalization, critical illness and accident and other benefits in accordance with company policies. The above job description is not intended to be, nor should it be construed as exhaustive of all responsibilities, skills, efforts, or working conditions associated with the position. Requests for reasonable accommodation will be considered to enable individuals with disabilities to perform the essential functions of this position. The Company is an equal opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity or expression, national origin, ancestry, age, marital status, domestic partnership or civil union status, disability, veteran status, or any other protected characteristic.

Description TIG Welder Location: Fairfield, NJ Employment Type: Full-Time About the Role TiFab is seeking a skilled TIG Welder with experience in stainless steel and nickel alloys who is eager to expand into titanium welding. In this role, you'll support both defense and commercial customers by producing high-spec welds that meet stringent quality and industry standards. This is precision-driven, hands-on work with opportunities to earn advanced certifications-including titanium qualification. What You'll Do • Perform TIG welding in all positions on stainless steel, nickel alloys, and titanium (training provided), • Pass TiFab's TIG welding assessment and qualify for required alloy and joint configurations, • Set up and lay out welding jobs using CAD drawings, fixtures, and diagrams, • Follow ASME and NAVSEA welding procedures and specifications, • Use rotary turntables, positioners, purge setups, and related tools, • Read and interpret drawings, weld symbols, and written instructions, • Pre-clean weld areas using acetone, grinders, and flapper wheels, • Tack weld and fabricate basic fixtures to support welding operations, • Maintain a clean, organized, and safety-compliant work area, • Perform basic maintenance on welding equipment Must-Have Skills and Experience • Strong manual TIG welding ability, • Proficiency reading blueprints and weld symbols, • Experience welding stainless steel and nickel alloys, • Ability to pass a TIG welding assessment, • Physical ability to stand, walk, and perform repetitive hand motions, • High school diploma or GED, • Authorized to work in the U.S. Nice-to-Have Skills • Experience welding titanium, • NAVSEA or ASME welding experience, • General fabrication experience, • Experience with purge setups or high-spec welding environments, • Background in aerospace or defense welding Who You Are • Detail-oriented with strong hand-eye coordination, • Committed to cleanliness, precision, and strict quality standards, • Comfortable working independently while knowing when to ask questions, • Safety-focused and collaborative, • Motivated to develop new welding capabilities, including titanium Additional Details • Salary Range: Starting at $22-26 per hour (+$2 for titanium plate qualification), • Shift: Mon-Thurs (6:30 AM - 3:30 PM), Fri (6-hour shift), • Travel: Occasional travel for commercial jobs (per diem available), • Benefits: Medical, dental, vision, 401(k), PTO

Job DescriptionYU & Associates, Inc., an awarding winning engineering firm located in Elmwood Park, New Jersey is seeking a Transportation Project Manager to join our team. As a Project Manager specializing in water resource engineering, you will be responsible for leading and managing projects related to water management, drainage systems, flood control, and watershed management. Responsibilities • Lead and oversee water resource engineering projects, including the design, analysis, and implementation of water management systems, drainage systems, and flood/resiliency control measures., • Serve as the primary point of contact for clients, ensuring effective communication and maintaining strong client relationships throughout the project lifecycle., • Manage and mentor a multidisciplinary project team, providing technical guidance, assigning tasks, and ensuring project objectives are met., • Develop comprehensive project plans, including scope, budget, schedule, and resource allocation., • Coordinate with internal and external stakeholders, such as government agencies, environmental consultants, and contractors, to ensure project compliance and successful execution., • Conduct hydrologic and hydraulic modeling, analyze data, and prepare reports and recommendations for water resource management projects., • Evaluate and design stormwater management systems, including detention basins, green infrastructure, and erosion control measures., • Review and approve project deliverables, including design plans, technical specifications, and construction documents., • Monitor project progress, identify potential risks and challenges, and implement effective mitigation strategies., • Ensure compliance with applicable regulations, permits, and environmental standards., • Collaborate with clients and stakeholders to address project concerns, resolve issues, and ensure client satisfaction.Stay updated on industry trends, emerging technologies, and best practices in water resource engineering. Requirements: • Bachelor's degree in civil engineering, Water Resources Engineering, or a related field. A master's degree is a plus. Professional Engineer License in New York and/or New Jersey is required, or ability to obtain within 6 months., • 10+ years of experience in design, planning, and implementation of stormwater and hydraulic elements with a focus on project management, • Proven track record of successfully managing water resource engineering projects, including drainage systems, flood control, and watershed management. Strong knowledge of hydrology and stormwater and green infrastructure design., • Proficient with CAD/Design Software (AutoCAD, MicroStation, Civil 3d, Inroads/OpenRoads) and able to assist others as needed., • Proficient with stormwater modeling software such as CivilStorm or StormCAD required., • Business development skills and the proven ability to win work a plus., • Good client relationship development sills., • Experience writing proposals, scopes of work, and budgets for projected work., • Ability to effectively communicate at all levels of the organization., • Ability to manage & mentor staff, and direct resources effectively in a positive manner., • Ability to travel to job sites.We offer employees competitive compensation packages, medical/dental/vision, life insurance, short, and long-term disability, paid holidays, paid time off, and 401k retirement plan with company match. YU & Associates’ is an Equal Employment Opportunity employer fully committed to providing equal opportunity in all areas of employment practices. No employee or applicant for employment is discriminated against because of race, creed, color, religion, gender, gender identity or expression, sexual or affectional preference, sexual orientation, sex, ancestry or national origin, citizenship status, age, disability, marital or domestic status, veteran status, atypical hereditary cellular or blood trait, genetic information or testing, or any other legally protected category in all employment decisions. We foster a work environment that’s inclusive as well as diverse, where our employees can be themselves. Every idea and perspective are valued to meet our common goals. YU & Associates is committed to supporting our employees’ well-being by providing benefits that are a valuable part of the compensation package. We partner with our employees to foster a healthy, safe and rewarding lifestyle both at work and at home. The Y&A benefits program for full-time employees include: · Benefits: • Medical-National plan with low out of pocket costs to members., • Dental-National plan., • Vision-National plan with the largest vision network., • Life/AD&D-Benefit available should an employee pass away while employed., • Short-Term Disability-Benefit in the event an employee is unable to work for a short period of time., • Long Term Disability-Benefit in the event an employee is unable to work for an extended period., • Employee Assistance Program-Employee 3rd party support available when needed., • ADP Retirement Plan with company match., • Bonus Program – based on individual and company performance., • Yearly review – based on individual and company performance.Tax Savings Tools:, • Healthcare Reimbursement Accounts-Tax Free benefit to employees., • Flexible Spending Accounts-Tax Deductible benefit for employees., • Dependent Care and Commuter Program-Tax Deductible benefit for employees.Value Adds:, • Will Preparation, • Beneficiary Grief Support SALARY RANGE: $130,000 to $150,000 Powered by JazzHR rfXgG7wDyS

Job DescriptionDescription: The Drafter is responsible for creating accurate technical drawings and 3D models to support the design, fabrication, and manufacturing of products. This role works closely with engineering, production, and project teams to translate concepts, specifications, and field information into detailed 2D drawings and 3D images used for manufacturing, sales, and customer approvals. Key Responsibilities not limited to: • Create, revise, and maintain detailed 2D CAD drawings and 3D models for manufactured components, assemblies, and systems, • Develop 3D images and renderings for design visualization, internal review, customer presentations, and sales support, • Interpret engineering sketches, specifications, and notes to produce accurate manufacturing drawings, • Ensure drawings comply with company standards, industry codes, and manufacturing best practices, • Collaborate with engineers and manufacturing teams to resolve design and production issues, • Update drawings based on engineering changes, field feedback, and production requirements, • Maintain organized and up-to-date drawing files, revision histories, and documentation, • Assist with bills of materials (BOMs) and part documentation as needed, • Support continuous improvement by identifying opportunities to enhance drawing accuracy, efficiency, and clarityRequirements:, • Associate degree or technical certification in Drafting, CAD Technology, Engineering Technology, or related field (or equivalent experience), • Proven experience as a Drafter or CAD Technician in a manufacturing environment, • Proficiency with CAD software - AutoCAD and Inventor, • Strong ability to create and manipulate 3D models and images, • Solid understanding of manufacturing processes, materials, and tolerances, • Ability to read and interpret engineering drawings and specifications, • Strong attention to detail and accuracy Preferred Qualifications • Experience creating 3D renderings for customer-facing or sales applications, • Familiarity with sheet metal, weldments, machined parts, or fabricated assemblies (as applicable), • Knowledge of GD&T - Geometrical Dimensional Tolerances, • Experience working with ERP or document control systems Skills & Competencies • Strong visual and spatial reasoning skills, • Effective communication and collaboration skills, • Ability to manage multiple projects and meet deadlines, • Problem-solving mindset with a focus on practical manufacturing solutions ------------------------------------------------------------------------------------------------------------------------- At VMC Group we believe in supporting our employees both professionally and personally. When you join our team, you gain more than just a job — you gain access to a range of benefits designed to promote your well-being, growth, and financial security. • Health, dental and vision insurance, • 401K with company match, • Life Insurance, • Flexible Spending Accounts, • Generous annual time off policy, • 12 Company-Paid holidays, • A Solid Wellness Program to support your personal health goals, • Professional development opportunities Join our team and build a rewarding career where your contributions are valued and your growth is supported. Be a part of a fast-growing, technology-driven manufacturing company — APPLY TODAY! ---------------------------------------------------------------------------------- We provide equal employment opportunities to all applicants regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic.

Job DescriptionThis is a temporary 6-month contracted W2 position. The pay range for this position is $70-$85/hr (depending on prior experience) Job Functions: • Applies expertise as an emerging authority in the mechanical engineering discipline., • Conceives and develops solutions to difficult analytical and pneumatic/mechanical/electrical design problems., • Participates in establishing system or component design objectives and writes portions of complex specifications and engineering reports., • Reviews and helps to develop product specifications, • Conducts conceptual design studies using MCAD and other applicable design tools. Collaborates with other engineering functions, • Develops prototype hardware using internal manufacturing resources and outside vendors, • Tests product to verify that designs meet specification requirements such as environmental, regulatory and safety requirements, • Generates documentation supporting the design, • Provides training, technical advice and guidance to junior engineers. Guidance may be technical or project related as Project Leader or Lead Engineer of small to medium projects. Required Knowledge, Skills and Abilities: • Design for Manufacturability and Assembly, DFM&A (cost/tooling/process considerations), preferably using SolidWorks CAD software., • Understanding in design and development of injection molded plastic, plastic extrusion, casting, sheet metal, metal stampings, additive manufacturing processes, and machined metal components, and assemblies with high part counts highly desirable., • Knowledge of mechanical design and development using metric ANSI/ISO dimensioning and drafting standards highly desirable., • Understanding of GD&T, mechanical measurement and testing equip., and statistical analysis of test data., • Experience with electronic document control systems in medical device and/or medical equipment design and development., • Highly skilled at analytical reasoning, mechanism design, creative problem solving, and mathematical analysis., • Ability to create and meet scheduled timelines (manage and coordinate tasks as required)., • Ability to work in a team environment., • Strong communication skills., • Familiarity with dimensioning and tolerance, thermal and structural analysis, and vibration testing/analysis, • Intermediate knowledge of FDA, IEC and UL standards relating to medical electronic equipment, • Strong technical and analytical ability, verbal and written communication skills, ingenuity and creativity, interpersonal and project management skills, • Ability to operate test equipment such as various pressure and flow measurement equipment, temperature/humidity chambers, PC-based data recorders, simulators, DVM’s and oscilloscopes, • Familiarity and the ability to operate basic shop equipment such as a drill press, lathe, milling machine, brake and shear Minimum Requirements: • BSME or MSME and a minimum of 10 years of related experience in design/product development of electro pneumatic assemblies including technical supervision of sub-projects, • Formal training in basic and advanced topics in Solid Works is strongly preferred, • Proficiency with Microsoft Windows, MS Office applications, and Adobe Acrobat, • Advanced proficiency with SolidWorks, MCAD/CAE software and database management software preferred, • Advanced proficiency with Microsoft Visio and Microsoft Project preferred Important Notice: Protecting Your Information Medvacon Talent Acquisition only conducts initial video interviews via Microsoft Teams or Zoom. All communication will come from an email address ending in @medvacon.com. If you receive a message that seems suspicious or is not from our official domain, please report it immediately to jobs@medvacon.com. Powered by JazzHR YICfO1XHEv

Job Description COMPANY CULTURE Our focus is to deliver world-class solutions to our customers, on time and of the highest quality, as the preferred supplier of highly engineered, energetic, and pyrotechnic devices while developing our associates and maximizing long-term value for our shareholders through organic growth and targeted acquisitions. GENERAL STATEMENT OF DUTIES: The Engineering Manager leads and oversees the engineering department for the design, development, project management, qualification and certification of pyrotechnic and high precision explosive devices, ensuring the development, safety, quality, and compliance of these products and systems. This role involves managing engineering projects, guiding technical teams, and collaborating with quality, manufacturing, safety, and regulatory teams to innovate and deliver reliable, compliant pyrotechnic and high precision explosive devices, solutions for defense, aerospace, and commercial applications. ESSENTIAL DUTIES AND RESPONSIBILITIES: The Engineering will be responsible leading the Engineering team, and executing the strategy aligned with the company's business objectives and growth plans. The Engineering duties and responsibilities are as follows: • Lead and manage a team of engineers specializing in pyrotechnic design, testing, and qualification, • Oversee the development of new pyrotechnic and high precision explosive devices products and systems, ensuring they meet technical specifications, safety standards, and customer requirements., • Oversee the formulation, manufacturing, testing, and validation of explosive and energetic materials, ensuring adherence to strict safety, environmental, and regulatory standards, including compliance with agencies such as the Department of Defense (DoD), DOT, OSHA, and EPA., • Ensure all products and processes comply with relevant industry standards, including MIL-STD, ISO, and safety regulations., • Establish and maintain rigorous safety protocols, handling procedures, and quality assurance processes for sensitive and hazardous energetic materials., • Manage project budgets, schedules, and resources to ensure timely, within-scope, and cost-effective delivery of critical defense and aerospace projects., • Collaborate with government agencies, regulatory bodies, and industry partners to obtain approvals, certifications, and compliance throughout product development and deployment., • Promote a culture of operational excellence, safety, and continuous improvement within the engineering organization., • Coordinate and oversee safety assessments, environmental testing, and certification activities for pyrotechnic devices., • Establish and maintain engineering processes, best practices, and documentation for design, testing, and production., • Manage project timelines, budgets, and resource planning for engineering initiatives., • Collaborate with regulatory, safety, quality, manufacturing, and supply chain teams to ensure compliance and product reliability., • Lead troubleshooting efforts for engineering-related issues, root cause analysis, and continuous improvement initiatives., • Stay current on advancements in pyrotechnic materials, safety standards, and industry regulations. PHYSICAL DEMANDS: Must possess sight/hearing senses or use prosthetics that will enable these senses to function adequately so that the requirements of this position can be fully met. Physical activity includes walking, standing, bending, squatting, reaching above shoulders and lifting up to 40lbs. Must be able to drive an automobile for short and long distances. The candidate for this position will have to spend long hours using a computer, which can cause eye strain. This position will have to manage a number of requests and situations at one time. Stress may be caused by the need to complete tasks within tight deadlines. WORK ENVIRONMENT: Performs office activities in a lighted and ventilated area. May be subject to changes in temperature and exposure to dust. Will be exposed to uncontrolled environmental conditions while driving. Will work in a normally acceptable office environment, with no abnormal hazards or risks. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Travel between two manufacturing sites, Byram NJ and Fairfield. QUALIFICATIONS, KNOWLEDGE, AND SKILLS: • Knowledge of energetic materials, explosives, propellants, and pyrotechnic systems used in aerospace and defense applications., • Strong understanding of aerospace engineering principles, safety protocols, and handling procedures for hazardous materials., • Demonstrated ability to manage large-scale projects, budgets, and cross-functional teams in a high-stakes environment., • Effective decision-making and strategic planning skills., • Strong knowledge of ERP systems, SAP, Sightline, Sage, Epicor., • Strong knowledge of Microsoft applications: Word, excel, power point, share point., • Excellent analytical, organizational, and problem-solving skills, • Excellent leadership, communication, and stakeholder management skills., • Effective leadership and team management abilities., • Project management experience or familiarity with aerospace development lifecycle., • Industry certifications related to aerospace engineering (e.g., ASQ certifications, IPC certifications)., • Strong understanding of testing, validation, manufacturing, and quality control processes for energetic products., • Ability to work effectively in cross-functional teams and meet critical deadlines., • Experience with compliance documentation and certification processes., • Ability to work under pressure and manage multiple tasks simultaneously. EDUCATION AND EXPERIENCE: • Bachelor's or Master's degree in Chemical Engineering, Mechanical Engineering, Explosive Engineering, or a related discipline; advanced degrees are a plus., • 5+ years of experience in pyrotechnics, explosives, energetics, or related fields, with at least 5 years in a senior leadership role. · Experience in aerospace component development, testing, or systems integration. Strong understanding of aerospace design standards and regulations (e.g., AS9100, FAA, EASA, USG, DOD Requirements). Knowledge of explosive and energetic materials, chemistry, safety protocols, and regulatory standards. Proven ability to lead cross-functional teams and manage complex projects involving hazardous materials. Experience working with regulatory agencies and obtaining certifications or approvals for energetic products. Proficiency in CAD software (CATIA, SolidWorks), simulation tools (ANSYS, MATLAB), and test equipment. Knowledge of materials, manufacturing processes, and environmental testing. Knowledge of air worthiness certification, supplemental type certification, and parts manufacturing authority. DISCLAIMER The above information on this description has been designed to indicate the general nature and level of work performance by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to this job. Cartridge Actuated Devices is an Equal Opportunity Employer and encourages the application of female, minority, disabled, and veteran candidates. Due to the potential for exposure to ITAR controlled data, the incumbent in this role must be a US Person (US Citizen or US Permanent Resident). Due to the nature of our products, to the extent applicable to an employee's role, each employee must be able to obtain (and maintain) the ATF Possessor License as a condition of employment.

Job DescriptionThe Project Manager will be in charge of supervising the development of complex projects while observing pre-determined conditions (cost, quality, safety, timelines). The Project Manager will participate in defining the project's specifications, planning its implementation and drawing up its budget. They will be involved with both technical and financial aspects and coordinate the work of the various participants involved. Ensure that the development methods, timelines and costs are observed during each phase of the process. Serves as a primary contact for our clients and is responsible for ensuring that the contracted services are provided in a timely and professional manner. Has overall responsibility for all aspects of, and the success of, all assigned projects. Responsibilities: • As the project progresses the project manager will be responsible for identifying unanticipated tasks that can increase the cost of the project or delay meeting the assigned schedule., • The project manager will monitor the progress of the project; Interprets, organizes, executes, and coordinates assignments., • The project manager will establish the project budget, track the actual project expenditures against the forecast expenditures and will implement corrective action as needed. The project manager will prepare cost to complete estimates to determine whether the project can be completed within the assigned budget., • The project manager will be responsible for assuring that all internal project quality assurance procedures are followed., • Applies a thorough knowledge of current principles and practices of engineering as related to the variety of aspects affecting the firm., • Supervises a staff of engineers and technicians., • Plans, schedules, or coordinates the preparation of documents or activities for multiple major projects., • Responsibilities may include marketing, budgeting, financial managements, schedule coordination and resources allocation., • Performs preliminary engineering design and/or reviews the design and drafting work of staff or project engineers, CAD operators., • Coordinates work with other engineers and professionals within and outside own discipline, and with support services staff., • Assisting in company-wide business development in all disciplines of the firm’s practice.Qualifications:, • Master’s degree in engineering from an accredited college or university., • Registered Professional Engineer in New Jersey or New York., • Possess 8+ years of engineering management experience., • Proven ability to identify, develop and mentor talent., • Excellent listening, written and oral communication skills., • Effectively manage projects from concept through completion., • Proven leadership and decision-making skills., • Strong attention to detail with excellent analytical and judgment capabilities., • Establish a vision and create an environment for excellence., • Demonstrated record of ethics and high standards.Strong technical writing, communication skills and interpersonal skills are expected at this level, proven through technical presentations, technical papers and/or participation in technical committees. We offer employees competitive compensation packages; benefits packages; life insurance, short/long term disability insurance; and 401K retirement plan with company match. YU & Associates' is an Equal Employment Opportunity employer fully committed to providing equal opportunity in all areas of employment practices. No employee or applicant for employment is discriminated against because of race, creed, color, religion, gender, gender identity or expression, sexual or affectional preference, sexual orientation, sex, ancestry or national origin, citizenship status, age, disability, marital or domestic status, veteran status, atypical hereditary cellular or blood trait, genetic information or testing, or any other legally protected category in all employment decisions. We foster a work environment that’s inclusive as well as diverse, where our employees can be themselves. Every idea and perspective are valued to meet our common goals. YU & Associates is committed to supporting our employees’ well-being by providing benefits that are a valuable part of the compensation package. We partner with our employees to foster a healthy, safe and rewarding lifestyle both at work and at home. The Y&A benefits program for full-time employees include: · Benefits: • Medical-National plan with low out of pocket costs to members., • Dental-National plan., • Vision-National plan with the largest vision network., • Life/AD&D-Benefit available should an employee pass away while employed., • Short-Term Disability-Benefit in the event an employee is unable to work for a short period of time., • Long Term Disability-Benefit in the event an employee is unable to work for an extended period., • Employee Assistance Program-Employee 3rd party support available when needed., • ADP Retirement Plan with company match., • Bonus Program – based on individual and company performance., • Yearly review – based on individual and company performance.Tax Savings Tools:, • Healthcare Reimbursement Accounts-Tax Free benefit to employees., • Flexible Spending Accounts-Tax Deductible benefit for employees., • Dependent Care and Commuter Program-Tax Deductible benefit for employees.Value Adds:, • Will Preparation, • Beneficiary Grief Support SALARY RANGE: $125,000 - $145,000 Powered by JazzHR AW1bAVVdaj

Job Description About CP Engineers With over 40 years of industry leadership, CP Engineers delivers innovative solutions in site/civil, water/wastewater, municipal, MEP, and environmental engineering. Our diverse portfolio spans private, municipal, county, and regional clients—many of whom have partnered with us for decades. Join a fast-growing team dedicated to technical excellence, client satisfaction, and professional growth. Remote work flexibility, competitive compensation and benefits, and a supportive culture have helped CP earn Best Places to Work in NJ awards for three years straight and have driven strong employee retention. Position Overview: CP Engineers is seeking a highly skilled Senior Electrical Engineer to provide technical leadership and mentorship within our electrical engineering team. This role is responsible for developing project scopes, preparing budget estimates, and overseeing electrical design work to ensure the delivery of high quality, accurate, and consistent engineering outputs across the organization. The Senior Electrical Engineer will review, sign, and seal electrical drawings and will also contribute hands on design support as required. Project work may include electrical and control systems for commercial and industrial buildings, water and wastewater pump stations, treatment facilities, and various municipal infrastructure projects. Technical & Design Responsibilities: • Lead electrical engineering design for power distribution, lighting, energy, communications, fire alarm, and control systems across commercial, industrial, municipal, and infrastructure projects., • Prepare and seal engineering drawings, specifications, load calculations, fault current analyses, and arc‑flash studies in accordance with state PE requirements., • Oversee electrical system modeling using industry-standard software (e.g., SKM, ETAP, EasyPower, or equivalent)., • Review and approve design documents produced by EITs, junior engineers, and CAD/BIM staff., • Ensure all plans comply with IBC, NEC, IEEE standards, NFPA codes, local building codes, and utility service requirements., • Assist with P&ID development, • Develop process control schematics, • Must have experience working with HVAC equipment, generators and ATS, switchgears, transformers, and fire alarm systems, • SCADA and PLC development and programming a plus, • Panel design experience a plus, • Experience with gas pipe trains and cleanrooms a plus Project Delivery & Coordination: • Serve as the electrical discipline lead on multi‑disciplinary project teams, coordinating closely with mechanical, structural, civil, and water resources groups., • Develop complete plan sets, technical specifications, and bid/construction documents., • Support construction-phase services: respond to RFIs, review submittals, conduct field inspections, issue punch lists, and prepare site visit reports., • Participate in value engineering, feasibility studies, and system evaluations for renovation and new construction projects. Quality & Compliance: • Maintain compliance with firm-wide QA/QC procedures., • Review design deliverables for technical accuracy, constructability, and regulatory compliance., • Verify that designs meet safety, reliability, maintainability, and operational requirements., • Maintain up-to-date knowledge of emerging electrical codes, utility standards, and industry advances. Client Engagement & Business Support: • Meet with clients to define project scope, requirements, and technical expectations., • Provide technical guidance, recommendations, and solutions during planning and project execution., • Support proposal writing, project budgeting, and electrical scope development., • Attend client meetings, presentations, and project interviews as required. Leadership & Mentoring: • Provide technical mentorship to junior electrical engineers, EITs, and designers., • Support staff development through training on codes, design standards, and best practices., • Oversee workload distribution, task assignments, and schedule adherence for electrical discipline tasks. Compensation: $115,000-$145,000 Requirements • Degree in Electrical Engineering or equivalent from an accredited university., • Maintain active Professional Engineer (PE) license in NJ (or ability to obtain via reciprocity)., • Minimum 7-10 years of electrical engineering experience, with a track record of leading, mentoring, or supervising other engineers., • Represent the firm at industry events, technical conferences, or professional association meetings as needed, • Excellent ability to review and critique designs and provide constructive guidance., • Strong verbal and written communication skills, high attention to detail, and the ability to work collaboratively in a team environment., • Understanding of construction processes and field coordination, with the ability to support field engineers when necessary., • A valid driver’s license and dependable transportation., • Must be proficient in AutoCAD Benefits • Flexible Work Options: Hybrid/remote work arrangements, • Work/Life Balance: Flexible hours, 20 days paid time off, • Financial Security: 401(k) with 4% company match, • Professional Growth: Tuition reimbursement, professional license and association fee coverage, • Comprehensive Health: Medical, dental, and vision insurance, • Supportive Culture: Commitment to employee well-being and career development

Job Description We are Corporate Woodworking and we’ve been manufacturing architectural millwork in New Jersey for over 40 years. As we continue to grow, we are looking for someone to join our team as a Project Draftsman / Engineer. Job Responsibilities include: • Drafting and Review of AutoCAD shop drawings for architectural woodworking projects., • Prepare CNC machine programs using CAD/CAM software (WoodWOP, WoodCAD|CAM, CutRite)., • This is a Full-Time, Monday through Friday Position from 7:00AM – 4:00PM., • Looking for someone highly proficient in AutoCAD, we are able to train on the CNC programming side of the responsibilities., • Experience with woodworking, cabinetry, carpentry, and/or millwork would be preferred., • Experience with WoodCAD|CAM - OR - Microvellum would be beneficial., • Position is not eligible for remote work, • Compensation based on experience, • Candidate MUST Possess a Positive Attitude, a Willingness to Work & is Team Oriented., • Candidate MUST be Able to Perform Tasks Given Without Direct Supervision., • Competitive compensation package including full health benefits, PTO, 401k.Company DescriptionCorporate Woodworking along with her sister company, Andersen Interior Contracting, are divisions of The Andersen Companies and have been the leaders in commercial interior systems and millwork contracting in the Northeast since 1986 with its corporate headquarters located in Fairfield, NJ. We also have a solid and ever growing presence and offices throughout the state of Florida since 2009. We are a successful and reliable organization with an impeccable reputation in the marketplace for our high standards of service and performance with our customers along with our workplace culture and long-tenured employees providing us with the highest levels of integrity and trust for a professional work experience like no other.Corporate Woodworking along with her sister company, Andersen Interior Contracting, are divisions of The Andersen Companies and have been the leaders in commercial interior systems and millwork contracting in the Northeast since 1986 with its corporate headquarters located in Fairfield, NJ. We also have a solid and ever growing presence and offices throughout the state of Florida since 2009. We are a successful and reliable organization with an impeccable reputation in the marketplace for our high standards of service and performance with our customers along with our workplace culture and long-tenured employees providing us with the highest levels of integrity and trust for a professional work experience like no other.

Job Description Essential Duties and Responsibilities: • Maintains single point accountability for project work with an increased emphasis on client, landlord, building departments, contractor, and vendor interaction and project documentation., • Monitors all projects within account; manages multiple accounts at one time., • Assists SPM in the management of account's profitability., • Conducts field surveys., • Assists SPM with preparation of personnel reviews and employee disciplinary actions as required., • Directs team members (employees and consultants) at all levels of contract administration., • Controls any number of projects at various stages of work., • Assists SPM in maintaining strong client relationships, project timelines, manpower scheduling and billings., • Assists SPM in managing administrative tasks such as review of timesheets, phone logs, invoices and change orders., • Reviews and redlines sets of construction documents and prepares feedback to staff., • Prepares project designs and plans using CAD software and equipment., • Verify monthly with the current direct reports that the Clients are happy with work, that we are meeting their expectations and to see if there is any additional work we can provide., • Directs activities of workers engaged in preparing drawings and specification documents., • Sends correspondence to clients as required., • Researches code requirements., • Travel required - approximately 25% Supervisory Skills: • Ability to manage staff under the supervision of SPM, including but not limited to staff scheduling, project hour monitoring, construction drawing review and consultant coordination., • Provides whatever assistance is needed within the team to meet the account needs, including overtime if required., • To review tasks and the time required to review tasks., • Maintains that staff follows and complies with all company policies, procedures and applicable laws., • Responsibilities include training employees; planning, assigning and directing work; addressing complaints and resolving problems. Skills and Abilities: • Ability to work with minimum supervision., • Requires a high level of creativity in solving design and construction issues., • Ability to manage and complete multiple projects from inception through completion., • Strong knowledge of architectural assemblies, mechanical, electrical & plumbing components and systems., • Strong understanding of management and administrative functions such as change orders, account profitability, timesheets (completed daily), project correspondence and scope of contract work., • Ability to communicate effectively both in written format and oral presentation., • Requires strong management, communication and problem-solving skills., • Demonstrates that the client is comfortable working with them., • Ability to multi-task and establish priorities., • Ability to maintain organization in a changing environment., • Exhibits initiative, responsibility, flexibility and leadership., • Ability to audit RFP's for scope, services and cost., • Possess thorough knowledge of contract administration and office procedures., • Ability to develop and manipulate construction details as required for the project., • Highly proficient in the use of AutoCAD, Revit, Sketchup, InDesign, Illustrator, Photoshop and Microsoft 365, preferred. Education and/or Work Experience Requirements: • Bachelor's Degree - with emphasis in Architecture, Interior Design and/or Construction., • 4 years related work experience in Food and Beverage, Veterinary Hospitals and/or Healthcare, preferred. Company DescriptionTricarico Architecture and Design was founded in 1987 and has catered to the Retail, Health + Beauty, Food + Beverage, Veterinary and Commercial industries for over three decades. The firm has evolved into a multi-disciplined Architecture and Design group with a highly diverse team of dedicated professionals consisting of Registered Architects, Licensed Interior Designers, LEED Accredited professionals, Project Managers, CAD Operators, an in-house M.E.P. department and an experienced administrative staff. Tricarico is licensed in all 50 states, Washington, D.C. and Puerto Rico, allowing us to quickly and efficiently complete projects all over the country. We possess unparalleled knowledge, both technological and visionary, seeking out projects that will challenge our minds to ensure we remain progressively innovative. Our speed, proficiency and remarkable level of customer service has earned us notable commendations from our clients, standing as testimony to the quality of work we provide.Tricarico Architecture and Design was founded in 1987 and has catered to the Retail, Health + Beauty, Food + Beverage, Veterinary and Commercial industries for over three decades. The firm has evolved into a multi-disciplined Architecture and Design group with a highly diverse team of dedicated professionals consisting of Registered Architects, Licensed Interior Designers, LEED Accredited professionals, Project Managers, CAD Operators, an in-house M.E.P. department and an experienced administrative staff. Tricarico is licensed in all 50 states, Washington, D.C. and Puerto Rico, allowing us to quickly and efficiently complete projects all over the country. We possess unparalleled knowledge, both technological and visionary, seeking out projects that will challenge our minds to ensure we remain progressively innovative. Our speed, proficiency and remarkable level of customer service has earned us notable commendations from our clients, standing as testimony to the quality of work we provide.

Description TIG Welder Location: Fairfield, NJ Employment Type: Full-Time About the Role TiFab is seeking a skilled TIG Welder with experience in stainless steel and nickel alloys who is eager to expand into titanium welding. In this role, you'll support both defense and commercial customers by producing high-spec welds that meet stringent quality and industry standards. This is precision-driven, hands-on work with opportunities to earn advanced certifications-including titanium qualification. What You'll Do • Perform TIG welding in all positions on stainless steel, nickel alloys, and titanium (training provided), • Pass TiFab's TIG welding assessment and qualify for required alloy and joint configurations, • Set up and lay out welding jobs using CAD drawings, fixtures, and diagrams, • Follow ASME and NAVSEA welding procedures and specifications, • Use rotary turntables, positioners, purge setups, and related tools, • Read and interpret drawings, weld symbols, and written instructions, • Pre-clean weld areas using acetone, grinders, and flapper wheels, • Tack weld and fabricate basic fixtures to support welding operations, • Maintain a clean, organized, and safety-compliant work area, • Perform basic maintenance on welding equipment Must-Have Skills and Experience • Strong manual TIG welding ability, • Proficiency reading blueprints and weld symbols, • Experience welding stainless steel and nickel alloys, • Ability to pass a TIG welding assessment, • Physical ability to stand, walk, and perform repetitive hand motions, • High school diploma or GED, • Authorized to work in the U.S. Nice-to-Have Skills • Experience welding titanium, • NAVSEA or ASME welding experience, • General fabrication experience, • Experience with purge setups or high-spec welding environments, • Background in aerospace or defense welding Who You Are • Detail-oriented with strong hand-eye coordination, • Committed to cleanliness, precision, and strict quality standards, • Comfortable working independently while knowing when to ask questions, • Safety-focused and collaborative, • Motivated to develop new welding capabilities, including titanium Additional Details • Salary Range: Starting at $22-26 per hour (+$2 for titanium plate qualification), • Shift: Mon-Thurs (6:30 AM - 3:30 PM), Fri (6-hour shift), • Travel: Occasional travel for commercial jobs (per diem available), • Benefits: Medical, dental, vision, 401(k), PTO

Job DescriptionYU & Associates, Inc., an awarding winning engineering firm located in Elmwood Park, New Jersey is seeking a Transportation Project Manager to join our team. As a Project Manager, you will lead and oversee transportation engineering projects, ensuring their successful execution and delivery to clients. Responsibilities: • Manage and supervise transportation engineering projects, including highway design, traffic engineering, roadway improvements, transportation planning, and airport design. Serve as the primary point of contact for clients, maintaining effective communication and building strong relationships., • Provide technical expertise and quality reviews in the areas of highway design, and protection of traffic, transportation planning, and/or any combination thereof., • Report on project staffing needs, including, but not limited to, recruitment, development, retention, and succession of project staff., • Monitor project progress, identify risks and issues, and implement appropriate mitigation strategies., • Prepare project budgets, schedules and specifications for labor and materials., • Conduct regular project meetings, providing updates to stakeholders and ensuring alignment with project objectives., • Prepare and review project deliverables, including reports, design plans, specifications, and cost estimates., • Manage project budgets and finances, including tracking expenses, approving invoices, and ensuring cost control measures are in place., • Support and participate in the development and mentorship of staff., • Stay informed about industry trends, emerging technologies, and best practices in transportation engineering.Qualifications:, • Bachelor's degree in civil engineering or a related field. A master's degree is a plus. Professional Engineer License in New York and/or New Jersey is required, or ability to obtain within 6 months., • 10+ years minimum transportation design experience. Highway/roadway design experience a plus, • Design Build project experience a plus., • Proficient with CAD/Design Software (AutoCAD, MicroStation, Civil 3d, Inroads/OpenRoads) and able to assist others as needed., • Proficient in Microsoft Office Suite, • Ability to lead a project and supervise technical staff., • Good client relationship development sills.We offer employees competitive compensation packages, medical/dental/vision, life insurance, short, and long-term disability, paid holidays, paid time off, and 401k retirement plan with company match. YU & Associates’ is an Equal Employment Opportunity employer fully committed to providing equal opportunity in all areas of employment practices. No employee or applicant for employment is discriminated against because of race, creed, color, religion, gender, gender identity or expression, sexual or affectional preference, sexual orientation, sex, ancestry or national origin, citizenship status, age, disability, marital or domestic status, veteran status, atypical hereditary cellular or blood trait, genetic information or testing, or any other legally protected category in all employment decisions. We foster a work environment that’s inclusive as well as diverse, where our employees can be themselves. Every idea and perspective are valued to meet our common goals. YU & Associates is committed to supporting our employees’ well-being by providing benefits that are a valuable part of the compensation package. We partner with our employees to foster a healthy, safe and rewarding lifestyle both at work and at home. The Y&A benefits program for full-time employees include: · Benefits: • Medical-National plan with low out of pocket costs to members., • Dental-National plan., • Vision-National plan with the largest vision network., • Life/AD&D-Benefit available should an employee pass away while employed., • Short-Term Disability-Benefit in the event an employee is unable to work for a short period of time., • Long Term Disability-Benefit in the event an employee is unable to work for an extended period., • Employee Assistance Program-Employee 3rd party support available when needed., • ADP Retirement Plan with company match., • Bonus Program – based on individual and company performance., • Yearly review – based on individual and company performance.Tax Savings Tools:, • Healthcare Reimbursement Accounts-Tax Free benefit to employees., • Flexible Spending Accounts-Tax Deductible benefit for employees., • Dependent Care and Commuter Program-Tax Deductible benefit for employees.Value Adds:, • Will Preparation, • Beneficiary Grief Support SALARY RANGE: $130,000 to $150,000 Powered by JazzHR zSyMTsU93n

Job DescriptionYU & Associates, Inc., an awarding winning engineering firm located in Elmwood Park, New Jersey is seeking a Senior Utility Engineer to join our team. As a Senior Utility Engineer, you will be responsible for supporting the planning, design, and preparation of contract documents for the construction of stormwater and utility infrastructure. Responsibilities: • Manage utility aspects of projects, oversee design and production of plans and specifications, and ensure that the work is produced on schedule profitably., • Collaborate with project teams to analyze utility relocation conflicts on infrastructure projects., • Review and provide feedback on Utility Owner design submittals., • Coordinate utility design efforts with consultants and stakeholders., • Perform constructability reviews to ensure compatibility with construction methods., • Analyze projects and direct ASCE SUE investigations., • Compile and compute a variety of engineering data., • Prepare plans, and details and develop engineering drawings, specifications, and other project deliverables., • Support and participate in the development and mentorship of staff. Qualifications: • Bachelor’s degree in civil engineering or related field., • PE License in New Jersey and/or New York required, or ability to obtain within 6 months., • Must have a minimum of 5 years of experience in project engineering design., • Skilled with CAD/Design Software (AutoCAD, MicroStation, Civil 3d, Inroads/Openroads)., • MS Office proficiency., • Experienced with ASCE standard governance of subsurface utility engineering., • Experience with different construction techniques and constructability of utilities and associated civil aspects in design-build projects., • Strong oral and written communication skills, self-motivation, team-oriented work practices, data analysis & technical problem solving, organizational skills and the ability to work effectively in a multi-disciplinary team environment., • Ability to travel to job sites., • Work productively and meet deadlines timely., • Ability to independently manage small to medium size projects.We offer employees competitive compensation packages, medical/dental/vision, life insurance, short, and long-term disability, paid holidays, paid time off, and 401k retirement plan with company match. YU & Associates’ is an Equal Employment Opportunity employer fully committed to providing equal opportunity in all areas of employment practices. No employee or applicant for employment is discriminated against because of race, creed, color, religion, gender, gender identity or expression, sexual or affectional preference, sexual orientation, sex, ancestry or national origin, citizenship status, age, disability, marital or domestic status, veteran status, atypical hereditary cellular or blood trait, genetic information or testing, or any other legally protected category in all employment decisions. We foster a work environment that’s inclusive as well as diverse, where our employees can be themselves. Every idea and perspective are valued to meet our common goals. SALARY RANGE: $105,000 - $120,000 Powered by JazzHR 9whZnLWiGA

Job Description Job Summary: The focus of this position is upon manufacturing support, quality planning, problem solving, training, quality system maintenance, continuous improvement. Provides Quality Engineering coordination of quality planning activities that ensure products and processes are designed, validated, procured, manufactured and inspected in accordance with customer and company quality assurance requirements. This role requires work in our Fairfield and Byram locations. Primary Responsibilities: • Maintains and improves Quality systems such as Calibration, Document Control, Non-conformance, Corrective Action, Management Review, Audits, Material Return, Material Review Board, etc., • Uses ability to interpret and analyze blueprints to develop and facilitate the creation of Product Quality Plans, Process Failure Mode and Effects Analysis, Control Plans and Inspection Instructions. Develops and initiates standards and methods for inspection, and evaluation of products and processes. Collects data tied to appropriate statistical techniques and sampling plan., • Develops and implements means for the use and reporting of statistical and capability studies in the manufacturing process., • Maintains, coordinates activities and systems, and makes improvements to quality systems such as Non-Conformance, Material Returns, Gage and Tooling Calibration, etc., • Assist in performing failure analysis for products and processes using problem solving tools and techniques. Troubleshoots processes to improve and correct quality issues., • Supports Quality Manager in various activities including cross-functional teams in formal and informal continuous improvement activities (i.e. developing and improving baseline Cpks, reducing scrap and rework, improving first time yields, reducing costs). Prepares reports, graphs and charts (level I-III) to describe trends, pin point areas of focus for improvement opportunities, or to provide information, • Maintains a thorough knowledge of all manufacturing and quality assurance systems i.e. Lot Acceptance, Military Specs, Design Qualification Testing, and quality assurance systems, i.e. First Article Inspection, Calibration of inspection equipment, inspection methods, techniques and gages, etc and, • Documents non-conformances and conducts preliminary reviews. Conducts preliminary review and analyzes non-conformance data to identify opportunities for corrective, preventive or continuous improvement opportunities., • Writes, revises and releases technical procedures and work instructions as necessary. Identifies opportunities for improvement and recommends changes to system documents., • Performs and hosts audits of quality systems, products, and processes, internal and external (suppliers/subsidiaries)., • Adheres to safety practices and procedures and follows overall CAD procedures & policies, procedures tied to ISO 9001/AS9100 and other QMS requirements., • Adheres to the Controlled Unclassified Information (CUI) policies and procedures related to NIST 800-171 and completes all required CUI Awareness training, which includes collection, processing/handling, transmission, storage, and general safeguarding practices., • Maintains the confidentiality of all information processed. Performs related duties as assigned. Regular and consistent attendance is required. While performing the duties of this job, the employee is occasionally required to stretch, bend, kneel and stoop and perform work behind a safety shield. The employee is regularly required to walk, communicate, and reach with hands and arms. The employee is frequently required to sit, stand, and use hands to finger, handle, or feel. The employee must occasionally lift and/or move up to 50 pounds using appropriate moving devices. Specific vision abilities required by this job include close vision, color vision, depth perception and ability to adjust focus. Work environment: While performing the duties of this job, the employee maybe at times be exposed to solder, fluxes, cleaners, epoxies, and masking agents while using appropriate personal protective equipment. Safety apparatus/ measuring devices are required to be used when performing tasks involving both X-Ray and Leak Tester. Work is performed in a temperature-controlled environment. The noise level in the environment is usually low to moderate. Essential Skills: Subject Matter Understanding. Analytical. Computer Applications. Project Management. Critical Thinking. Problem Solving. Attention to details. Use of basic inspection measuring equipment/test equipment, (i.e.) power supplies, oscilloscope, ohmmeter. Job Qualifications: Required: Bachelor's degree in an Engineering, or Technical field of study. All candidates are required to have excellent verbal and written communication skills; strong organizational and interpersonal skills; attention to detail, imitative and ability to prioritize multiple projects; experience in team facilitation and problem solving, knowledge of Root Cause Analysis, Failure Modes, and Effect Analysis, Quality Reporting and Analysis, Flowcharting and Procedure Analysis; knowledge of in Capability Analysis, process control of product, developing controls plans and statistical techniques . Preferred: Working knowledge of ISO 9001, AS9100, and / or similar quality system standards and Microsoft Office. Employment with Cartridge Actuated Devices is contingent upon the successful completion of a background investigation, including any required Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF) screening, and drug screening, as permitted by applicable law. The background investigation may include verification of employment history, education, criminal records, ATF-mandated checks, and other relevant information to determine suitability for employment. The drug screening will be conducted in accordance with state and federal regulations. Failure to successfully pass the background check, ATF screening, or drug screening, or the provision of false or misleading information during the application process, may result in withdrawal of a job offer or termination of employment. By proceeding with the application process, you acknowledge and consent to the background, ATF, and drug screening requirements as described above.

Elevate your career at Marotta Controls, a New Jersey Top Workplace three years running! Dedicated to innovation, quality and excellence, we deliver cutting edge control systems for the Aerospace & Defense industry. At Marotta, we value bold thinking and teamwork, and we empower our employees to push boundaries while delivering top-tier solutions to our customers. Our team fosters a fun, collaborative culture where creativity and technical excellence thrive! Your next big opportunity starts here. Be part of a company where your work supports a mission that makes a difference-apply today ! Manufacturing Engineer II POSITION PROFILE: This position is primarily responsible for creating, maintaining and optimizing CNC Programs (Milling & Turning Centers), Operation/Tool Sheets, Mfg. Routers and tool/fixture designs utilizing best practices to effectively support machine shop operations for Marotta Controls, Inc. Your knowledge/expertise should include both Gibbs or Mastercam, and PRO-E. This knowledge will be applied during the design phase of new products, redesign phase of existing products, equipment set-up activities, cost estimates, facility layout plans, root cause troubleshooting and continuous improvement initiatives. The incumbent must be a dynamic individual who can multi-task and oversee various activities associated with aerospace manufacturing ensuring that Mfg. Eng. activities are conducted in a manner that complies with company requirements (i.e. regulatory, safety, administrative, etc.). This position requires effective interaction with a broad spectrum of people both internal and external to the organization to successfully support operations and the corporate strategic vision. Minimum Required Qualifications: • 5 years of related experience in a machine shop manufacturing environment (Aerospace preferred, but not required), • 2 years of Gibbs and/or Mastercam & PRO- E usage, • High School or (GED) Diploma, Bachelor's degree in Mfg. Engineering or related field preferred, • Self-motivated individual who possess the ability to analyze, organize, plan, prioritize assignments, multi-task and achieve results through interaction with others, • Possess math skills required to design tools/fixtures and generate accurate, safe CNC Programs in an effective manner. Ability to interpret various types of graphs and data required for problem solving, SPC, etc., • Demonstrate effective verbal/written communication skills required for interacting with all levels of personnel both internal and external to the organization, • Secure external resources (subcontracted services) to maintain and ensure machine shop equipment is operational, • Knowledgeable/proficient in the areas of Lean Manufacturing concepts, employee training, development of equipment, operation, & training procedures/policies, effective application of mfg. methods, tool/fixture design, material selection, facility layout plans, cost estimates, DFM concepts, GT&D practices, machine shop documentation (operator./tooling sheets, routers, etc.), root cause investigations, trouble shooting, performance metrics and machine shop operational activities, • Must be computer literate. Demonstrate proficiency using Gibbs or Mastercam & PRO-E, CAD/CAM., • Ability to read, interpret documents (i.e. procedures, blueprints/technical drawings, etc.) and use necessary measuring devices/equipment to confirm tooling/fixturing geometries and dimensions, • Must be a US Citizen ESSENTIAL DUTIES / RESPONSIBILITIES: • Abide by all safety, quality, housekeeping and company policies/procedures to ensure compliance to various regulatory and internal system requirements, • All practices and activities related to Mfg. Eng. must be performed in a manner which supports commonality, standardization (where applicable), First Past Yield and utilization of safe/best industry practices, • Create, maintain and refine detailed mfg. documentation (i.e. Operation Sheets, Routers, Set-up/Tooling sheets, etc.) through effective selection of manufacturing methods (inclusive of inspection point selection), • Assist in securing external resources (subcontracted services) to maintain and ensure machine shop equipment is operational to achieve production efficiencies, and on-time customer shipments, • Generate, optimize, validate and maintain C.N.C. Programs for CNC MILLING and CNC TURNING CENTERS through the effective application of Gibbs & PRO-E CAD/CAM software, • Design efficient/safe tools and fixtures required to support machine shop operations, • Generate accurate estimates (i.e. set-up, cycle time, material, etc.) using cost effective mfg. methods, • Define, monitor and communicate the status of performance metrics to management. Implement appropriate actions to resolve identified issues, • Effectively communicate issues in a timely manner to all affected parties internal/external to the Marotta Organization, • Train and provide guidance to personnel required to support the goals and objectives associated with Mfg. Eng. and machine shop operations, • Foster a positive, cooperative and safe work environment through effective communication at all levels of the Marotta organization, • Actively participates in team meetings, root cause investigations, trouble shooting activities (as req'd), continuous improvement initiatives/programs, etc. to provide constructive recommendations and initiate actions to support company initiatives/goals/vision Work Environment : • While performing the duties of this job, the employee is frequently exposed to conditions typical of a manufacturing/machine shop environment, including, but not limited to: fluids, fumes or airborne particles, moving mechanical parts, noise and vibration, • This job interacts both in a professional office environment and a manufacturing/machine shop environment. This role uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines, as well as environments inclusive of the appropriate eye, hearing and foot protection (as required)., • Temperature of work environment may be affected by outside/external temperatures, machining processes, etc., • Overtime and weekend may be required, if job duties demand., • No travel is expected for this position Physical Requirements : • While performing the duties of this job, the employee is regularly required to talk and hear., • The employee is frequently required to reach with hands and arms, and to use hands to finger, handle or feel, • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus., • The employee is regularly required to stand at length (7-8 hours, daily), sit, walk, stoop, bend, turn, balance, and/or crouch, and move about the facility., • The employee may be required to lift and/or move items weighing up to 40 pounds, and occasionally up to 70 lbs. This position is at our Montville, NJ corporate offices location. Pay Range: $35.00 - 44.00/hour Many of our contracts require proof that you are a U.S. citizen and/or that an export license has been obtained for employees who are citizens of certain countries. Your employment, both initially and continually thereafter, is conditioned on production of such proof of citizenship and/or any export license that may be required to comply with any and all applicable laws, regulations, or executive orders, or required by Federal, State, or local government contracts. At Marotta Controls, we are committed to a fair, performance-driven compensation approach that promotes consistency across all levels of our organization. We ensure that pay decisions are free from bias, based on objective criteria, and are regularly reviewed. Your level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, experience, and internal consistency. Additionally, we offer a highly competitive compensation package for this opportunity, including incentive compensation and a comprehensive suite of premium benefits. These include medical, prescription, dental, vision, life, and disability insurance, a 401(k) plan with company match, tuition assistance, paid vacation, sick and personal days, paid holidays, and flexible scheduling options such as compressed workweeks. We value and reward employee achievements and host multiple engagement events each quarter to foster a strong, supportive workplace culture. If you are looking to grow or accelerate your career and be part of a best in class organization while enjoying a work-life balance, please visit our website at www.marotta.com to learn more about us and to apply. Check out all of our openings at https://marotta.com/job-openings/ VETERANS ARE ENCOURAGED TO APPLY No agencies, please. Pay Range: $28.05 - $37.95 per hour

KLA-Belgium, located in Totowa, New Jersey, is seeking a Mechanical Engineer with proficiency in mechanical design and CAD systems.The role involves creating 3D CAD models and designing mechanical components for electro-mechanical systems.The ideal candidate should have a Bachelor's degree in Mechan

Senior Mechanical Design Engineer in Hawthorne, New Jersey, to drive the design and development of advanced power generation systems.The role requires 8-10 years of experience in mechanical design and product development, along with expertise in CAD software and analysis techniques.The successful ca

Position Title: Senior CAD/CAE Engineer Location: Mahwah, NJ 07430 Duration: 06 Months (Possible Extension/Conversion) / No C2C Eligibility Due to client requirements this role is only open to USC or GC candidates. Position Overview We are seeking a detail‑oriented Senior CAD/CAE Engineer to suppo

MMT in Ramsey, New Jersey is seeking a Mechanical Engineer to innovate in automation and machine design.You will work on cutting-edge projects, collaborating with a design team to create and test custom robotics and machine tools using Autodesk Inventor.The ideal candidate has a Bachelor’s degree

Senior CAD/CAE Engineer in Mahwah, NJ. The ideal candidate will have a Bachelor’s degree, at least 2 years of experience in CAD/CAE engineering, and strong attention to detail.

The ideal candidate should have a BS/BA in Interior Design or Architecture, 2-4 years of experience, and proficiency in tools like AutoCAD and SketchUp.

Your Day-to-Day Lead all aspects of CAD-driven plan preparation and production for civil and survey projects Maintain, refine, and expand internal CAD standards to improve accuracy and efficiency Develop and implement CAD software policies, procedures, and best practices Manage and update AutoCAD st

About First Environment Headquartered in Butler, New Jersey, First Environment is a veteran-owned, multi-disciplinary environmental consulting and engineering firm.We’ve earned a reputation for solving and mediating complex environmental challenges facing Fortune 500 corporations, federal and stat

Real-world expertise is turned into training data, evaluations, and feedback loops that improve how models perform.AI labs and enterprises use micro1 to train models and build reliable AI agents through advanced evaluations and reinforcement learning environments.Experts contribute directly to how A

Enterprise Mobility is seeking a responsible, dedicated person to join our team as a full time Automotive Detailer.The starting rate of pay is $17.Employees can earn yearly merit increases based on performance.This position is located at 1562 NJ-23 Wayne, NJ 07470.We offer a robust Total Rewards Pac