Trabajos cad en Plainview, New YorkCrear alertas

Job Description Travel Required: 30-mile radius from Westbury to Manhattan We are seeking an HVAC Sheetmetal Drafter to become part of our team! Our projects intersect many sectors from Leading Technology Firms/Hotels/Educational Campuses/Bio Labs/Multi-Family Housing/Commercial Industries/Finance Industry/Tenant Fit out and more...Employees gain a wealth of experience through drafting different projects and regularly interact with Design Professionals to gain project approval. Qualifications: • Proficiency in CAD, Navisworks, and other drafting tools, • Strong understanding of mechanical engineering principles and design standards, • Detail-oriented individual with strong analytical and problem-solving abilities, • Self-motivated and driven self-starter with high integrity, • Excellent communication, interpersonal, and commitment to getting the job completed with accuracy, • 6–10 years of relevant experience required Responsibilities: • Work with senior draftsmen, estimating team and project management team to understand the scope of work and installation intent to accurately design and produce shop drawings and as-built drawings, • Field Surveying Job Site to confirm dimensions, • Ensure compliance with benchmarks, ceiling heights and tolerances, • Flag conflicts on shop drawings that require architect/engineer review, • Ability to layout equipment and orientation of mechanical equipment as required, • Conduct thorough reviews of mechanical plans and drawings for accuracy, compliance, and feasibility, • Produce accurate shop drawings based on industry standard and norms, • Review and modify designs if mechanical plans presented are not achievable Company DescriptionFounded in 1992, ALL-CITY METAL, INC., is a leader in both sheet metal HVAC fabrication and installation, as well as the fabrication, manufacturing and installation of Trash Compactors, Trash Chutes, Linen Chutes and chute doors. We are a full service company that designs and manufactures our products onsite in the USA. We offer a variety of products including the above and related specialty items, accessories, hardware and components.Founded in 1992, ALL-CITY METAL, INC., is a leader in both sheet metal HVAC fabrication and installation, as well as the fabrication, manufacturing and installation of Trash Compactors, Trash Chutes, Linen Chutes and chute doors. We are a full service company that designs and manufactures our products onsite in the USA. We offer a variety of products including the above and related specialty items, accessories, hardware and components.

Job DescriptionDescription: JOB TITLE: Machinist/Programmer Job Summary: We are seeking a skilled Machinist/Programmer to join our team. The ideal candidate will have experience operating and programming CNC machines to produce precision parts. You will be responsible for reading blueprints, setting up machines, programming CNC controls and inspecting parts to ensure they meet specifications. Perform the activities of an expert level CNC programmer and shop leader to machine, program, estimate, and coordinate various products per established facility processes, including set-up, fabrication, and inspection using the operations of CNC mills, lathes, and other equipment. Perform as a key contributor for the new knowledge of programs and projects. Apply knowledge of policies, procedures, and the practical application of general and specific technical aspects of the job to complete varied and complex work. Make recommendations for new procedures. Work independently in established procedures and practices. Lead tasks and mentor others. Due to the nature of work performed within this facility, U.S. citizenship is required. Key Responsibilities: · Program set up, and operate CNC machines (lathes, mills, or grinders) to produce parts according to specifications. · Interpret blueprints, engineering drawings, and CAD models to develop and modify CNC programs. · Select and install appropriate tools, fixtures, and materials for each job. · Perform machine maintenance and troubleshooting to ensure optimal performance. · Inspect finished parts using precision measuring instruments to verify conformance to specifications. · Collaborate with engineering and production teams to optimize machining processes and improve efficiency. · Maintain a clean and safe work environment, adhering to company safety policies and procedures. · Continuously monitor machine operations to detect malfunctions or deviations from specifications. Required Qualifications: · High school diploma or equivalent; technical degree or certification in machining, CNC programming, or a related field is preferred. · Proven experience as a Machinist/Programmer, with a strong background in CNC programming and machine operation. · Proficiency in reading and interpreting blueprints, technical drawings, and CAD models. · Experience with various CNC controls (e.g., Fanuc, Haas, Siemens). · Strong knowledge of machining principles, materials, and cutting tools. · Excellent problem-solving skills and attention to detail. · Ability to work independently and as part of a team in a fast-paced environment. · Good communication skills and a commitment to quality and safety. · Ability to lift and carry up to 30lbs. · Comfortable working in a manufacturing environment with exposure to noise, dust and other industrial elements. · 10 years of experience with programming in computer-aided manufacturing (CAM) software and machining and fabrication principles · 10 years of experience with CNC and manual machinery operations · 5 years of experience with using Mastercam and programing and executing 4th and 5th axis machining operations · 3+ years of experience with estimating CNC machining work and jobs · Ability to review engineering drawings for completeness and interpret geometric dimensioning and tolerancing (GD&T) · Ability to inspect and verify all products by using standard inspection equipment and techniques/CMM (Coordinate Measuring Machine) · Ability to set up and operate manual machine shop equipment, including lathes, milling machines, saws, and power tools · Ability to pay strict attention to detail in a manufacturing environment Why Join U.S Dynamics Corporation? At U.S Dynamics Corporation, you will be a part of a supportive and innovative environment that fosters growth and values your professional development. We offer competitive compensation, comprehensive benefits, and opportunities for advancement. Join us in shaping the future with your talent and expertise. Requirements:

Job Description Benefits • Paid training, • Medical, • Dental, • Vision, • Life/AD&D, • 401k with match, • Mileage and cell phone reimbursement For more than three decades California Closets has built a reputation on delivering truly custom products and unparalleled service to our clients. We’ve helped transform spaces, enhanced homes and allowed people to get more out of life. Our design consultants work closely with customers either in their homes or in one of our showrooms with company provided pre-scheduled appointments. As a California Closets Design Consultant, you will: • Offer a luxury experience for clientele through product expertise and elevated service., • Provide in-home design and consulting., • Work with interior designers, decorators, and architects., • Own all phases of the client experience from consultation to installation. Design Consultant Qualifications and Skills • Ability to listen to and collaborate with clients., • Personable and able to create relationships with ease., • Ability to manage multiple projects with extreme detail., • Excellent communication, organizational, and time management skills Design Consultant Requirements • Tech savvy – you will be required to learn our proprietary CAD software., • Must be able to take daily appointments and travel frequently in Nassau County, Queens, and non-MTA Brooklyn., • Full-time commitment Paid training of $55,000 and commissions up to and exceeding $120,000. *California Closets provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job DescriptionDescription: Aerospace Precision Machinist Cox & Company, Inc. is seeking an outgoing and detail-oriented Machinist to join our manufacturing team. This role offers an exciting opportunity to work with advanced machinery and contribute to the production of high-quality metal workpieces. If you are passionate about precision manufacturing and enjoy working in a dynamic environment, we encourage you to apply. Key Responsibilities • Operate one or more machine tools, including special purpose machines and industrial 3- and 4-axis CNC machines, to produce metal workpieces according to specifications., • Read and interpret technical drawings, blueprints, and work orders to determine machining requirements in English., • Monitor machine operations, making adjustments as necessary to maintain quality and precision., • Perform routine maintenance and troubleshooting on CNC equipment to minimize downtime., • Maintain a clean and organized work area to promote safety and efficiency. Skills and Qualifications • Proven experience operating CNC machines, particularly 3- and 4-axis CNC equipment., • Strong understanding of machining processes, tools, and measurement techniques., • Ability to read and interpret technical drawings and specifications in English., • Good problem-solving skills and attention to detail., • Ability to work independently and as part of a team in a fast-paced environment. At Cox & Company, Inc., we value our employees and foster a culture of continuous improvement and growth. We offer competitive compensation, comprehensive benefits, and opportunities for professional development. Join us and be part of a team dedicated to excellence in manufacturing. Requirements: Role and Responsibilities • Interpret drawings (GD&T principles), manufacturing process specifications, and manipulate 3D models used in preparation for machining., • Employee is competent and trustworthy to safely perform with minimum supervision and meet the requirements of the Machine Shop., • Able to operate program and operate CNC. (Mastercam, Fusion 360), • Ability to use all Modern and Conventional (Bridgeport, lathe, drill press, press brake, etc) Machine Shop equipment., • Ability to Design and Fabricate jigs, fixtures, tools and dies for ease of machining or manufacturing parts in volume in a consistent and repetitive manner, • Ability to identify appropriate materials and tool hardness for varying applications and maintain shop supply inventory Qualification and Education Requirements • To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions, • 15+ Years experience in a Machine Shop, Tool & Die Maker. Engineering background preferred., • Ability to follow instructions., • Ability to read equipment manuals., • Extensive knowledge of soldering process and techniques., • Excellent organizational skills and attention to detail., • Excellent time management skills., • This position involves exposure to projects and contracts subject to the International Traffic in Arm Regulations (ITAR). As result, only U.S. Citizens or Permanent Residents (Green Card holders) are eligible for employment in this role. Applicants must meet these requirements to be considered. Supervisory Responsibilities • This position directly supervises one employee and carries out supervisory responsibilities in accordance with the organization’s policies and applicable laws. Proficiency Skills • Ability to calculate figures and amounts such as proportions, percentages, area, circumference, and volume., • Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Safety Requirements • This position requires the use of approved safety footwear (ASTM F-2413 complaint) when accessing or working in production and workshop areas., • Safety Sensitive Position Computer Skills • MRP/ERP (Visual Manufacturing) experience or similar preferred, • CAD/Model based design software (solidworks, Fusion 360, Catia), • CAM Software programming (Mastercam, Fusion 360) Benefits • Competitive salary, • Health, dental, and vision insurance, • 401(k) with company match, • Paid time off and holidays, • Opportunities for career growth and development Physical Requirements • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions., • While performing the duties of this Job, the employee is regularly required to stand; use hands to finger, handle, or feel and reach with hands and arms. The employee must frequently lift and/or move up to 40 pounds., • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.

Job DescriptionSUMMARY OF POSITION: Check-Mate Industries is seeking a skilled and dependable CNC Machinist to join our manufacturing team. This role is responsible for setting up and operating CNC milling machines to produce precision components that meet strict quality and performance standards. The ideal candidate will have hands-on machining experience, strong attention to detail, and the ability to work independently in a fast-paced production environment. ESSENTIAL FUNCTIONS: Includes, but may not be limited to the following, other duties maybe assigned based on departmental needs and company goals: • Set up and operate CNC milling machines for production runs, • Load and verify programs, set tool offsets, and perform first-piece inspections, • Interpret blueprints, technical drawings, and work instructions, • Utilize precision measuring instruments, including calipers, micrometers, and height gages, • Monitor machine performance and make necessary adjustments to maintain tolerances, • Ensure consistent product quality while minimizing scrap and rework, • Maintain a clean, organized, and safe work area, • Adhere to all company safety policies and procedures QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential function satisfactorily. Reasonable accommodation may be provided to enable a qualified individual with disabilities to perform the essential job functions. Education and Experience • High School Diploma or equivalent, supplemented by 3+ years of CNC mill experience KNOWLEDGE, SKILLS AND ABILITIES: • Proven ability to set up machines and run jobs independently, Haas, Makino, Doosan are a plus, • Proficient in reading blueprints and understanding tolerances, • Experience using standard inspection and measuring tools such as calipers, micrometers, gauges, indicators, optical comparators, and 3D scanning, • Strong attention to detail and commitment to quality, • Familiarity with ERP/MES systems, PLEX, IQMS are a plus, • Basic knowledge of CAD/CAM software, • Reliability and strong work ethic, • Attention to detail with a focus on efficiency, • Willingness to learn and continuously improve, • Effective communication and teamwork skills PHYSICAL REQUIREMENTS: While performing the duties of this Job, the employee is regularly required to stand, sit and walk for extended periods of time. Employees must be able to stand for long periods of time. The employee is occasionally required to stoop, reach overhead, lift and/or move up to 40 pounds. Tasks require manual dexterity, hand, arm, and finger dexterity to operate machine and other equipment. In addition, visual and hearing acuity; as well as identifying and distinguishing colors. ENVIRONMENTAL REQUIREMENTS: This role is based on the manufacturing shop floor within a high-volume production facility. While performing duties in designated production areas, the use of personal protective equipment (PPE) is required to ensure safety and compliance with workplace regulations. Powered by JazzHR iKiQtdEXiV

Job DescriptionDescription: Aerospace Tool Designer Join our innovative aerospace engineering team as an Aerospace Tool Designer, where you will play a vital role in designing and developing essential tools that support the manufacturing and assembly of aircraft structural components. This position offers an exciting opportunity to contribute to the creation of high-precision tooling solutions that ensure quality and efficiency in aerospace production. Key Responsibilities: • Design, develop, and refine tools, jigs, fixtures, molds, and gauges used in aircraft manufacturing processes., • Support the entire tooling lifecycle, from initial concept and design reviews to procurement, production implementation, and documentation., • Collaborate with cross-functional teams to ensure tooling designs meet engineering specifications, safety standards, and production requirements., • Conduct design reviews and modify tooling based on feedback and testing results., • Maintain accurate documentation and configuration control for all tooling designs and revisions., • Assist in troubleshooting tooling issues during production and implement improvements as needed. Skills and Qualifications: • Strong understanding of manufacturing processes, materials, and aerospace standards in English., • Excellent problem-solving skills and attention to detail., • Ability to work collaboratively in a team environment and communicate effectively., • Knowledge of quality control and documentation procedures related to tooling. We foster a collaborative and innovative work environment that values continuous improvement and professional growth. Our company offers competitive benefits and opportunities to advance your career in the dynamic aerospace industry. Requirements: Key Responsibilities Tool Design & Modeling • Develop detailed 3D models and 2D drawings for a wide range of aerospace tooling, including assembly jigs, fixtures, molds, and gauges., • Design tooling solutions that support complex manufacturing and assembly challenges from concept through production., • Ensure all tooling designs comply with applicable engineering requirements, technical specifications, and company design standards. Software & Technology • Utilize CAD software such as Siemens NX, CATIA V5, and/or SolidWorks to create, modify, and maintain tooling designs., • Apply Geometric Dimensioning and Tolerancing (GD&T) principles to ensure accuracy, repeatability, and manufacturability., • Coordinate with internal manufacturing teams and external tooling vendors to support fabrication, validation, and delivery of tooling (experience working with proven external tool designers and manufacturers is a strong plus). Analysis, Quality & Compliance • Apply basic structural analysis principles and conduct research to validate tooling concepts and designs., • Ensure tooling meets quality, safety, ergonomic, and regulatory requirements., • Incorporate Design for Manufacturability (DFM) principles to ensure tools can be produced efficiently and cost-effectively., • Adhere to all company policies, safety standards, and applicable regulatory requirements. Project & Process Management • Manage the complete tooling design lifecycle, from concept development through release to production., • Participate in and lead design reviews; provide constructive feedback to peers and stakeholders., • Develop tooling usage instructions, maintenance plans, and evaluation criteria, including calibration and load-testing requirements., • Support methodization and standardization of tooling and processes to improve product quality and reduce manufacturing cycle times., • Collaboration & Communication, • Work closely with cross-functional teams including Engineering, Manufacturing, Operations, and Quality., • Communicate effectively with internal stakeholders and external vendors to ensure tooling requirements, schedules, and deliverables are met., • Demonstrate strong problem-solving skills, attention to detail, and clear written and verbal communication. Qualifications • Bachelor’s degree in Aerospace Engineering, Mechanical Engineering, Aeronautical Engineering, or a related field, with a minimum of four (4) years of aircraft tooling design experience., • In lieu of a degree, a minimum of eight (8) years of directly related aircraft tooling design experience., • Proven experience designing tooling for aerospace manufacturing or assembly environments is required. Safety Requirements • This position requires the use of approved safety footwear (ASTM F-2413 complaint) when accessing or working in production and workshop areas. This position involves exposure to projects and contracts subject to the International Traffic in Arms Regulations (ITAR). As a result, only U.S. Citizens or Permanent Residents (Green Card holders) are eligible for employment in this role. Applicants must meet these requirements to be considered.

Job Description Architectural millwork firm seeks Estimator. • Must be proficient in Microsoft Excel with a working understanding of CAD and Adobe., • Will be responsible for creating Excel spreadsheets for estimates, creating purchase orders and assisting Project Managers., • Must know how to read and understand architectural drawings., • Looking for someone that is people oriented, highly organized and has good time management skills., • Salary commensurate with experience. Benefits: · Health Insurance · 401K · 401K Match · Paid Time Off Job Types: Contract, Full-time Benefits: • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Paid time off Schedule: • 8 hour shift, • Monday to Friday Supplemental Pay: • Bonus pay Ability to commute/relocate: • Amityville, NY 11701: Reliably commute or planning to relocate before starting work (Required) Experience: • Construction estimating: 1 year (Required) Work Location: In person Company DescriptionAt DDMA, we design and build some of the most unique and complex millwork, casework and finish work features in the world. We have competed at the highest levels in the retail and residential environments for decades and are currently seeking project-managers to join our growing team. DDMA is family orientated company, built on the principles and values of creating a unique and rewarding experience for our employees all while fulfilling our commitment to our clients. You will have the opportunity to learn all aspects of this highly specialized industry, while building a long term career with an industry leader. Based on Long Island with exciting projects in Manhattan and throughout the country if you are looking for a fun and challenging environment.At DDMA, we design and build some of the most unique and complex millwork, casework and finish work features in the world. We have competed at the highest levels in the retail and residential environments for decades and are currently seeking project-managers to join our growing team.\r\n\r\nDDMA is family orientated company, built on the principles and values of creating a unique and rewarding experience for our employees all while fulfilling our commitment to our clients. You will have the opportunity to learn all aspects of this highly specialized industry, while building a long term career with an industry leader. Based on Long Island with exciting projects in Manhattan and throughout the country if you are looking for a fun and challenging environment.

Job Description Landscape Design/Build firm seeking landscape designer/CAD tech. Coastal Designs has been in business for more than 45 years and we are currently seeking an energetic, and motivated professional to join our team. Our company deals in high-end residential and commercial landscapes and we are looking for someone who wants to begin a career in landscape design/construction. Qualifications: • 2 Years Experience using CAD software, Excel and Word a must, • Good working knowledge of computers, • Organized, motivated, and energetic, • AOS College degree preferred, • Landscape Design experience a plus but not necessary -Reliable transportation to and from work, as well as to job sites for measuring Job Duties: • Measure Job sites (Own Transportation is required), • Create detailed plans, • Assist in estimating and creating proposals, • Order materials when necessary, • Assist in obtaining permits, • Interact with customers, vendors, and subcontractors on a regular basis, • Be able to complete a wide range of tasks Saturdays during our busy season (April-July) may be required if work load permits : will be paid at time and a half. 8am-5pm Monday through Friday are the standard hours, Saturdays may vary as stated above Job Type: Full-time Salary: $17.00 to $22.00 /hour Company DescriptionLandscape Design CompanyLandscape Design Company

Job DescriptionOverview We are looking for a Mechanical Engineer to support the design, development, and testing of aerospace components and systems. This role will play a key part in product development, ensuring designs meet performance, safety, and regulatory requirements. Key Responsibilities • Design and develop mechanical components and assemblies for aerospace applications, • Create 3D models, drawings, and documentation using CAD software (SolidWorks, CATIA, etc.), • Perform engineering analysis including stress, thermal, and vibration evaluations, • Support prototyping, testing, and validation of new designs, • Collaborate with manufacturing to ensure designs are production-ready, • Participate in design reviews and technical discussions, • Ensure compliance with aerospace standards and specifications, • Investigate and resolve design-related issues during development and production phases, • Support continuous improvement of existing products and systemsQualifications, • Bachelor's degree in Mechanical Engineering or related field, • 3-7+ years of mechanical design experience (aerospace preferred), • Proficiency with CAD tools (SolidWorks, CATIA, NX, etc.), • Knowledge of materials, mechanics, and design principles, • Experience with GD&T and engineering drawings, • Familiarity with aerospace standards (AS9100, FAA, etc.) is a plus, • Strong analytical and problem-solving skills, • Ability to work cross-functionally with manufacturing, quality, and project teamsPay Details: $90,000.00 to $130,000.00 per year Search managed by: Andrew Khanija Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.lhh.com/us/en/candidate-privacy The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance OrdinanceMassachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job Description Project Manager – Environmental Engineering Full-Time | Syosset, Long Island, NY Salary Range $90,000 – $150,000, commensurate with experience and qualifications. About the Company A well-established, multi-disciplinary consulting engineering firm is seeking a talented Project Manager to join its Environmental Engineering team. The firm provides engineering and construction management services to municipal and private clients throughout the Tri-State Region, specializing in civil, structural, traffic, environmental, landscape architecture, mechanical and electrical engineering. Typical project types include transportation infrastructure, utility improvements, site development, solid waste management facilities, and environmental monitoring/reporting programs. Position Summary We are looking for an experienced Environmental Engineering Project Manager with a strong background in environmental and/or civil engineering. This individual will manage design projects, permitting processes, and environmental monitoring/reporting tasks. The ideal candidate will also support business development initiatives and have clear potential to grow into a senior leadership role. Key Responsibilities Lead and manage project teams, schedules, deliverables, and budgets. Serve as primary client contact, ensuring excellent communication and service. Support business development activities, including proposal preparation and client presentations. Oversee and prepare engineering design plans, specifications, and cost estimates. Develop contract bid packages and funding applications. Prepare technical reports, environmental permit applications, and related documentation. Qualifications Bachelor's degree in Environmental, Chemical, or Civil Engineering; Master's in Environmental Engineering is a plus. 10–15 years of relevant engineering experience. Active NYS Professional Engineer (PE) license required. Strong knowledge of New York State regulations, specifications, and codes. Proficiency with industry-standard software (e.g., Microsoft Office, CAD). Proven experience in project management, technical writing, and business development is highly preferred.

Job DescriptionElectrical Engineer, Manufacturing, Aerospace, Pharma, Engineering Overview We are seeking High Voltage Electrical Engineers at the Junior, Mid-Level, and Senior levels to support the design, analysis, and maintenance of high-voltage power systems. These roles focus on ensuring the safe, reliable, and efficient operation of electrical infrastructure across transmission, distribution, and industrial environments. This position requires strong technical expertise in power systems, safety protocols, troubleshooting, and project execution, along with the ability to collaborate across engineering and operations teams. Key Responsibilities • Design, develop, and support high-voltage systems including transformers, switchgear, substations, and transmission/distribution networks, • Perform power system analysis, including load flow, short circuit, and arc flash studies, • Conduct inspections, testing, and preventative maintenance on high-voltage equipment to ensure reliability and safety, • Troubleshoot and diagnose electrical faults, implementing root cause analysis and corrective actions, • Support commissioning, testing, and ongoing system operation and maintenance, • Ensure compliance with electrical codes, safety standards, and regulatory requirements, • Collaborate cross-functionally with engineering teams, field personnel, contractors, and clients, • Prepare technical documentation including drawings, specifications, reports, and system models, • Support project planning, scheduling, and execution across multiple initiativesTechnical Skills Required, • Power system analysis and modeling (load flow, short circuit, arc flash), • High-voltage equipment design, testing, and maintenance, • Protection and control systems, • Electrical system troubleshooting and fault diagnostics, • Experience with industry tools (ETAP, SKM, PSCAD, or similar), • Electrical design, schematics, and CAD tools, • Knowledge of electrical safety standards, codes, and regulatory complianceCore Competencies, • Strong analytical and problem-solving capabilities, • Ability to manage multiple projects and priorities in fast-paced environments, • Effective communication with technical and non-technical stakeholders, • Strong attention to detail with a focus on safety and compliance, • Ability to work independently and collaboratively across teams, • Project management and planning skillsJunior High Voltage Electrical Engineer (0-3 Years) Responsibilities • Assist with system design, analysis, and documentation under supervision, • Support testing, inspections, and commissioning activities, • Perform basic calculations, modeling, and data analysis, • Assist in troubleshooting and field support activitiesRequirements, • Bachelor's degree in Electrical Engineering or related field, • Exposure to power systems, circuit analysis, or electrical design, • Basic understanding of electrical safety standards and compliance practices, • Familiarity with CAD or power system analysis tools preferredMid-Level High Voltage Electrical Engineer (3-8 Years) Responsibilities • Perform independent power system design, analysis, and equipment selection, • Conduct load flow, short circuit, and reliability studies, • Lead portions of projects including technical execution and deliverables, • Support commissioning, testing, and field troubleshooting, • Interface with clients, vendors, and internal stakeholdersRequirements, • Bachelor's degree in Electrical Engineering (Master's preferred), • 3-8 years of experience in power systems, utilities, or high-voltage environments, • Strong understanding of transmission, distribution, or substation systems, • Experience with system modeling tools (ETAP, SKM, PSCAD, or similar), • Knowledge of electrical codes, safety standards, and compliance requirementsSenior High Voltage Electrical Engineer (8+ Years) Responsibilities • Lead complex high-voltage engineering projects from concept through execution, • Perform advanced system studies (load flow, fault analysis, protection coordination, arc flash), • Mentor junior and mid-level engineers and provide technical oversight, • Establish engineering standards, best practices, and design methodologies, • Act as subject matter expert for power systems and high-voltage infrastructure, • Support business development, proposals, and client strategyRequirements, • Bachelor's degree in Electrical Engineering (Master's preferred), • 8+ years of experience in high-voltage or power systems engineering, • Deep expertise in substations, transmission, and distribution systems, • Strong experience in system analysis, design, and commissioning, • Professional Engineer (PE) license strongly preferred, • Demonstrated leadership and project management experienceAdditional Details, • Combination of office and field work (substations, plants, job sites), • Travel may be required depending on project scope, • Compensation aligned with experience levelIn accordance with New York salary transparency requirements, the anticipated annual base salary range for positions is: $80k- $140k annually. Actual compensation will be based on experience, qualifications, and demonstrated project leadership background. Search managed by: Danielle Morris - danielle.morris@ LHH.com Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.lhh.com/us/en/candidate-privacy The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance OrdinanceMassachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply Pay Details: $80,000.00 to $140,000.00 per year Search managed by: Danielle Morris Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.lhh.com/us/en/candidate-privacy The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance OrdinanceMassachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job DescriptionBenefits: • Bonus based on performance, • Competitive salary, • Employee discounts Design beautiful spaces. Build client relationships. Own your projects. About Us Peppard Home + Interiors is an appointment-based interior design showroom featuring one of the largest design libraries on Long Island. We guide clients through a highly personalized design experience using our signature L.A.Y.E.R. Method, delivering everything from single-room transformations to full-home design solutions. We are looking for a highly motivated Studio Interior Designer who combines strong design instincts with sales confidence, technical expertise, and exceptional client service. This is a client-facing, revenue-driving role for someone who thrives in both creative and performance-driven environments. The Role You will lead consultations, convert prospects into paid design services, and oversee projects from concept through specification. This role requires ownership, accountability, and the ability to balance creative design work with business performance. Key Responsibilities Client Consultation & Sales • Lead Design Discovery consultations and identify client needs, style preferences, and project goals, • Present and sell design services including Studio Sessions and Signature Room packages, • Build and manage your individual client pipeline from inquiry through project completion, • Follow up with leads, proposals, and active clients to maintain strong conversion ratesDesign Development, • Conduct Studio Sessions for wallpaper, rugs, window treatments, upholstery, custom furnishings, and soft goods, • Deliver Signature Room packages, including in-home consultations and site measurements when required, • Develop space plans, furniture layouts, elevations, and design presentations, • Create concept boards, finish palettes, sourcing plans, and final design proposalsProject Execution, • Prepare accurate specifications, pricing proposals, and product selections, • Manage CRM records, project notes, client communication, and order tracking, • Coordinate with vendors, workrooms, installers, and internal team members to ensure seamless project execution, • Maintain project timelines, budgets, and client expectations throughout the processQualifications, • 2 to 4+ years of residential interior design experience, • Strong portfolio demonstrating residential projects, floor plans, and elevations, • Proficiency in CAD or similar design software is required, • Comfortable presenting to clients, handling objections, and closing design sales, • Tech-savvy with experience using CRM platforms, sourcing tools, and project management systems, • Strong organization, communication, and follow-through, • Ability to manage multiple active projects without sacrificing quality or client experienceSuccess in This Role Looks Like, • Consistently converting consultations into paid design services, • Delivering polished, buildable design packages on time, • Maintaining strong client satisfaction and repeat business, • Hitting personal sales and project performance targets

Job Description Junior Mechanical Engineer — Superior Motion Controls (Farmingdale, NY) Internship leading to full-time | Long Island, New York | Up to $65,000 (internship) About SMC Superior Motion Control is a precision machine shop and assembly operation based in Farmingdale, NY, supporting the U.S. Department of Defense and major prime contractors. We're a small team with significant responsibility — the parts and assemblies we deliver matter, and so does every engineer on the floor. SMC is part of IPC Foundry Group, and this role plays a key part in growing our engineering capacity for the next generation of programs. The role This is a paid summer internship structured as a working tryout for a full-time Mechanical Engineer position. Strong performers convert to full-time at the end of the summer. Both the internship and the full-time role are based on-site in Long Island, NY. You'll come in working alongside our lead engineer, helping us tackle the volume of work. You'll get exposure to real DoD programs from day one and grow into design ownership as you ramp. What you'll do Summer internship — focus on vendor packages and drawing work: • Compile and refine vendor packages for DoD contracts — drawings, models, specs, certifications, • Update legacy drawing packages and CAD models to current standards, • Coordinate with internal teams, vendors, and the shop floor to keep packages accurate and complete Full-time conversion — responsibilities expand into design and program work: • Back up our lead engineer across design, testing, machining, and mechanical assembly, • Support new program proposals and design work, • Build and test production and prototype components in our shop, • Develop and maintain process documentation, work instructions, and engineering standards Requirements What we're looking for • Bachelor's degree in Mechanical Engineering or a related field, • Proficiency in SolidWorks, • Solid grasp of GD&T, drawing interpretation, and basic machining processes, • Hands-on mechanical aptitude — comfortable assembling and testing physical components, not just modeling them, • A self-starter mindset with the ability to navigate ambiguity without stalling out Nice to have • Exposure to a precision machining or job-shop environment, • Familiarity with DoD or government contracting standards (MIL-specs, AMS, ASME), • Electronics experience — not required, but useful Relocation and logistics For the summer internship, we provide relocation support to get you to Long Island, including travel and housing assistance during the trial period. Upon conversion to full-time, compensation and benefits will reflect the Long Island market, and you'll be responsible for your own permanent housing. Work schedule • Full-time, on-site in Long Island, NY, • Monday–Friday, day shift Benefits • Relocation assistance and housing support during the summer internship, • Paid time off, • Health insurance, • 401(k) with matching

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Machinist C Job Code: 37256 Job Location: North Amityville, NY Job Schedule: 1st Shift 9/80: Employees work 9 out of every 14 days - totaling 80 hours worked - and have every other Friday off Job Description: The primary purpose of a Machinist is to set up and operate manual & CNC machines to produce precision parts and instruments. Performs a variety of manufacturing operations related to fabrication and/or machining of precision parts and/or sheet metal for use in the electronic industry and/or manufacturing assembly. The position applies knowledge of mechanics, mathematics, metal properties, layout, and machining procedures. The position may require routine machine maintenance and programming capabilities. Essential Functions: \n • Machine parts to specifications, using machine tools, such as lathes, milling machines, or grinders. \n, • Set up, adjusts, and operates all the basic machining tools and many specialized or advanced variation tools to perform precision machining operations. \n, • Maintain the tools and machines required for optimum job performance. \n, • Calculate dimensions and tolerances using knowledge of mathematics and instruments, such as micrometers and calipers. \n, • Align and secure holding fixtures, cutting tools, attachments, accessories, or materials onto machines. \n, • Select the appropriate tools, machines, and materials to be used in preparation of machinery work. \n, • Monitor the feed and speed of machines during the machining process. \n, • Work from drawings, work orders, and instructions covering production parts or tooling requirements. \n, • Measure, examine, or test completed units to check for defects and ensure conformance to specifications, using precision instruments, such as micrometers. \n, • Set controls to regulate machining, or enter commands to retrieve, input, or edit computerized CNC machine control media. \n, • Must have a thorough knowledge in the operation of all metal working tools and machines, and the ability to determine the most efficient and economical methods of producing all materials and hardware related to or used in the construction of dies, fixtures, gauges, gigs, and tools. \n, • Construct, modify, or repair a wide variety of product parts, subassemblies, and related tooling. \n, • Set up and operate a variety of machine shop and/or sheet metal fabrication equipment. \n, • Understand and comply with customer specification in part manufacturing. \n, • Understand and use a wide variety of mathematical functions applicable to work tasks. \n, • Comprehensive knowledge of Geometric Dimensioning and Tolerances (GD&T). \n, • Demonstrate effective verbal, written, and interpersonal communication skills, as well as the ability to work in a team environment on research and solution development. \n\n Qualifications: • Requires a High School Diploma or equivalent and a minimum of 6 years of prior machining experience or 2 years post-Secondary/associate's degree with a minimum of 2 years of prior machining experience. \n Preferred Additional Skills: \n • Experience with CAD cam (Mastercam and Autocad are a plus), Haas and Hurco controls. \n, • Manual and CNC machining experience in a high technology manufacturing environment, including setting up machine tools, lathes, and milling machines. \n, • Programming for Mastercam. \n, • Accurately set up and operate CNC machines. \n, • Program, set up, and run a vertical machining center for one off prototype parts or production parts run. \n, • Experience reading/interpreting blueprints, sketches, and engineering specifications. \n, • Experience making standard shop computations relating to dimensions of work, tooling, feeds and speeds. \n, • Able to work independently, without direction, with all types of processes and prototype development instructions, including prints, sketches, schematics, memos, notes etc. \n, • Able to work with minimum supervisory guidance. \n\n In compliance with pay transparency requirements, the salary range for this role in in New York state is $25/hr - $46.63/hr. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .

Job Description Schivo Medical has the world’s most advanced CNC machining and precision manufacturing equipment running at peak performance. Our teams work with 5-axis mills, Swiss machines, EDM, lasers, and other high-end systems that produce critical components for medical and life science customers. We partner directly with leading OEMs and service providers, so every repair, calibration, and upgrade keep production moving and customers confident. Schivo is growing fast, with opportunities to build your skills across different technologies and move up or across into new roles. We are a team that values problem-solvers who can roll up their sleeves, think on their feet, and work on complex swiss screw machines. Will train the right person must be mechanically inclined.(In-house training provided. Shift hours:6:00am to 4:00pm(Wednesday to Sunday) * CNC Machine Operator Position Overview: Operate CNC Machine Operator and inspect finished parts. CNC Machine Operator Necessary Education, Skills, and Competencies (including licensing and certifications): • Experience with lathe/mill turning machines or trade school CNC Machine Operator certificate., • Experience using the Fanuc control preferred., • Working knowledge of various materials & tools (inserts, endmills, drills Etc.), • Ability to work independently with minimal supervision., • Good communication skills and positive can-do attitude, • Must be dependable and possess a willingness to learn new techniques., • mechanically inclined, • Mechanical aptitude: A strong understanding of mechanical principles., • Attention to detail: The ability to work with tight tolerances where precision is critical., • Technical knowledge: The ability to read blueprints and specifications and basic knowledge of G-code programming or CAD/CAM software., • Problem-solving: The ability to troubleshoot issues and make necessary adjustments., • Safety consciousness: Adherence to all safety guidelines and protocols., • Teamwork: The ability to work collaboratively with other team members Essential Duties and Responsibilities: • Verify components are produced to print (dimensional and visual inspection), • Change tools., • Make offsets., • Load material and remove scrap., • Fill out various paperwork., • Simultaneous operation of multiple machines, • Minor troubleshooting, • Part inspection Benefits: • 401(k), • 401(k)match, • Dental insurance, • Health insurance, • Vision Insurance, • Generous Paid time off, • Life Insurance, • Short/Long disability, • Employee referral program, • EAP program, • Employee discounts, • Summer and holiday events Schivo Medical is an Equal Opportunity Employer. All qualified applicants will receive employment consideration without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, genetic information, disability, or protected veteran status.

What You Will Do Design mechanical components and assemblies for high‑reliability electronic systems, from concept through detailed CAD models and drawings. Experience with CAD tools (Autodesk Inventor or similar). Familiarity with manufacturing processes and mechanical design best practices.

A leader in electrical solutions is seeking a Packaging Engineer based in Melville, New York.This role involves driving packaging development, ensuring product functionality while collaborating with diverse teams.Candidates should have proficiency in SolidWorks and a strong background in packaging d

Uniondale, New York, or Boulder, Colorado.The ideal candidate will design high-reliability systems and perform structural analysis using tools like ANSYS.You should have a degree in mechanical engineering, CAD experience, and strong problem-solving skills.The position offers a salary range of $115K-

BL Companies Inc is seeking an Entry/Mid-level Engineer to join their Energy Engineering team in Melville, New York. This role is ideal for individuals looking to grow their engineering design skills in energy infrastructure projects. The position requires a BS in Engineering, with 0-3 years of expe

A leading surveying firm in Melville is offering a summer internship that spans from May 18th to August 7th.

Frequency Electronics, Inc is looking for a mechanical engineer in Uniondale, New York, or Boulder, Colorado. This role involves designing mechanical components for high-reliability electronic systems and performing analysis using CAD tools and numerical methods. Candidates should have a bachelor's

Qualifications Bachelor of Science in Mechanical, Industrial, Systems, Aerospace, or Manufacturing Engineering 3-5 years of experience Proficiency in CAD software to design and draft manufacturing tools and fixtures Experience with CAM software for generating CNC programs Fundamental knowledge

Job DescriptionBenefits: • Bonus based on performance, • Company parties, • Employee discounts Support exceptional design. Create flawless execution. About Us Peppard Home + Interiors is an appointment-based interior design showroom featuring one of the largest design libraries on Long Island. We deliver highly personalized design services across both our Full Service and Project-Based Design divisions, helping clients create thoughtful, elevated spaces with confidence. We are seeking a highly organized and detail-driven Design Assistant to support our design team with project coordination, technical documentation, showroom preparation, and daily operational support. This role is ideal for someone who loves design but also understands that exceptional client experiences are built through consistency, precision, and follow-through. The Role As a Design Assistant, you will support multiple designers across active client projects while helping maintain the daily flow of the showroom. You will be responsible for technical drawings, design documentation, product tracking, and studio organization. Accuracy, accountability, and professionalism are essential. Key Responsibilities Studio & Client Preparation • Prepare the showroom, design materials, and sample selections prior to client appointments, • Ensure presentation areas, meeting spaces, and design resources are organized, polished, and client-ready, • Assist with in-studio client appointments when neededDesign Documentation, • Draft floor plans, elevations, and supporting drawings under designer direction, • Prepare concept boards, material presentations, specification sheets, and client proposals, • Assist with product sourcing, finish selections, and pricing documentationProject Coordination, • Track quotes, purchase orders, deliveries, and installation timelines, • Maintain accurate project notes, client records, and documentation within the CRM, • Coordinate follow-ups with vendors, workrooms, installers, and suppliers as neededLibrary & Operational Support, • Manage and maintain the design library, sample inventory, and vendor materials, • Organize discontinued samples, new product arrivals, and resource updates, • Support workflow systems across both Full Service and Project-Based design teamsQualifications, • 1 to 3+ years of experience in interior design, architecture, or a related design field, • Proficiency in CAD, SketchUp, or comparable design software is required, • Strong technical drafting skills with the ability to produce accurate floor plans and elevations, • Comfortable working with CRM platforms, digital sourcing tools, spreadsheets, and studio software, • Exceptional organization, time management, and follow-through, • Professional, polished, and comfortable working in a client-facing luxury studio environment, • Ability to support multiple designers and active projects simultaneously

Job Description The ideal candidate should have hands-on experience developing production-ready drawings for interior signage, retail displays, branded environments, merchandising fixtures, and corporate wayfinding systems. Key Experience Required: • Environmental Graphic Design, • Wayfinding Signage Systems, • Retail Display & Fixture Design, • 3D CAD Drawings & Shop Drawings, • Production / Fabrication Knowledge, • AutoCAD / SketchUp / Adobe Creative Suite Responsibilities Include: • Design and development of signage and display systems, • Creation of 3D renderings and presentation visuals, • Production-ready shop drawings and fabrication details, • Coordination with fabrication, project management, and installation teams, • Material specifications and construction detailing Software Experience: • Adobe Illustrator, Photoshop & InDesign, • AutoCAD, • SketchUp, • Fusion 360 or SolidWorks (preferred) Preferred Background: • Retail, banking, hospitality, commercial interiors, or branded environments, • Knowledge of acrylic, metal, wood fabrication, vinyl graphics, LED integration, and ADA signage Company Descriptionwww.msdny.com Millennium Signs & Display, Inc. is a full service signage, printing and Display fabrication company which offers the finest quality craftsmanship and customer service while providing the greatest value to our clients. MSD has manufacturing facilities with state of the art machinery for fabrication of all your acrylic, metal, wood, foam and vinyl products. MSD also has a wide range of printing capabilities, including large format photographic printing, flatbed printing and silk screening. From prototyping and engineering to kitting and large scale roll outs, MSD production and logistics team is dedicated to fulfilling your signage, display and graphic needs.www.msdny.com\r\n\r\nMillennium Signs & Display, Inc. is a full service signage, printing and Display fabrication company which offers the finest quality craftsmanship and customer service while providing the greatest value to our clients. MSD has manufacturing facilities with state of the art machinery for fabrication of all your acrylic, metal, wood, foam and vinyl products. MSD also has a wide range of printing capabilities, including large format photographic printing, flatbed printing and silk screening. From prototyping and engineering to kitting and large scale roll outs, MSD production and logistics team is dedicated to fulfilling your signage, display and graphic needs.

Our client, a Juniors + women's manufacturing brand, is seeking a 2D CAD Designer to join their growing team. Develop CADs from flat sketches to support the Sales, Design, and Production teams. Maintain and organize CAD libraries.

The ideal candidate should have a high school diploma along with relevant computer training, knowledge of structural steel, and proficiency in AutoCAD.

Real-world expertise is turned into training data, evaluations, and feedback loops that improve how models perform.AI labs and enterprises use micro1 to train models and build reliable AI agents through advanced evaluations and reinforcement learning environments.Experts contribute directly to how A

Working at the Naval Nuclear Laboratory we foster pride in belonging to an organization whose culture is made up of these core values: Trust, Empowerment, and Collaboration.Our company promotes a positive culture while ensuring the safety and reliability of our nation's naval nuclear reactors, and t

Project Manager (Academic Research).

Utilize engineering software such as AutoCAD, Revit, and HVAC load calculation tools to create accurate designs and calculations.

Enterprise Mobility is seeking a responsible, dedicated person to join our team as a part time Automotive Detailer.The starting rate of pay is $18.Employees can earn yearly merit increases based on performance.This position is located at 362 Hempstead Turnpike West Hempstead, NY 11552.We offer a rob

Auto Detailer/h2pCaliber Collision has an immediate job opening for an Auto Detailer to thoroughly clean all vehicles prior to final delivery to the customer, provide support to the repair center by shuttling customers and vehicles to the appropriate locations while maintaining all service tools and

Are you the right candidate for this opportunity Make sure to read the full description below.Senior Project Manager (Healthcare).We are seeking a talented and experienced .Senior Construction Project Manager.Long Island area with experience overseeing high-profile healthcare projects with constru

If you are considering sending an application, make sure to hit the apply button below after reading through the entire description.Construction Project Manager (Healthcare).We are seeking a talented and experienced.Long Island area with experience overseeing high-profile.Come join our team! We are

Enterprise Mobility is seeking a responsible, dedicated person to join our team as a part time Automotive Detailer.Employees can earn yearly merit increases based on performance.This position is located at 179 N Franklin St Hempstead NY 11550.We offer a robust benefits package including, but not lim

Do you have the skills to fill this role Read the complete details below, and make your application today.Telecom Broadband Project Manager.We are currently seeking a Telecom Project Manager to support our Telecom division.This position is hybrid and can sit at any of our LiRo offices.Come join our

Enterprise Mobility is seeking a responsible, dedicated person to join our team as a full time Automotive Detailer.The starting rate of pay is $18.Employees can earn yearly merit increases based on performance.This position is located at 220 Fulton St Farmingdale, NY 11735.We offer a robust Benefits

Utilize engineering software such as AutoCAD, Revit, and HVAC load calculation tools to create accurate designs and calculations.

Go Rentals was founded in 1995 to meet a clear need for a high-touch, quality vehicle rental service for discerning business and leisure travelers.Since its launch, Go Rentals has grown into a leading car rental service company with unrivaled knowledge, experience, and passion for aviation and hospi

All potential candidates should read through the following details of this job with care before making an application.Senior Construction Project Manager (Healthcare).We are seeking a talented and experienced .Senior Construction Project Manager.Long Island area with experience overseeing high-pro

Enterprise Mobility is seeking a responsible, dedicated person to join our team as an Automotive Detailer.The starting rate of pay is $17 / hour.Employees can earn yearly merit increases based on performance.This position is located at 1637 Route 9 Clifton Park, NY 12065.Consistent 25 hour per week

Are you the right candidate for this opportunity Make sure to read the full description below.Senior Project Manager (Healthcare).We are seeking a talented and experienced .Senior Construction Project Manager.Long Island area with experience overseeing high-profile healthcare projects with constru