Trabajos cad en Westfield, New JerseyCrear alertas

Description Artheon Inc is currently seeking an experienced Project Surveyor in New York, NY covering the five boroughs (Manhattan, Brooklyn, Queens, Bronx, and Staten Island) with flexibility to cover some projects in Northern New Jersey. This position is an office position, although requires some field visits on occasion. This position will typically report to a Project Manager or director of surveying. The candidate must be experienced in field and office surveying and must possess a professional surveying license or can become licensed within 1 year of being hired. Responsibilities \n • Overseeing field data collection to ensure accurate collection of data and mapping\n, • Overseeing office efforts to ensure accurate processing and mapping\n, • Writing survey reports, control reports, and project deliverables\n, • QA/QC of surveying products and data\n, • Reviewing field data and office processing, ensuring accuracy requirements are met and coverage of limits is met\n, • Discuss with field crew daily to determine the project status and help move the projects along.\n, • Ensuring everyone fully understands each scope and project and follows the scope closely. Our project specifications vary greatly depending on project and client, therefore the expectations change.\n, • Reviewing mapping and data collected in the field, reviewing previous data, and determining what information needs to be updated or collected based on client’s needs\n, • Discussion and meeting with project manager, crew managers, and directors to determine the needs for projects in order to help organize crews\n, • Hands-on training with field and office personnel: you will need to go out to the field, or delve into CAD to help train survey technicians for their own professional growth with regard to field and office work\n, • We take professional mentoring, growth, and training very seriously, and we expect everyone to help each other learn and grow at the company\n Qualifications \n • 10 years of surveying experience required\n, • Professional Surveying license or the ability to obtain licensure within 1 year)\n, • Passed the CST or FS exam preferred\n, • College degree or certificate in surveying\n, • Experience and Education with Total Stations, Digital or automatic Levels, Laser Scanners, and GNSS Systems.\n, • Experience in CAD for surveying and mapping\n, • Experience in processing of total station, GNSS, and levels, and other surveying data\n, • Experience and knowledge of Topographic Surveying and Boundary and Right of Way Investigation.\n, • Preference given to individuals interested in continuing education, licensure, and other certifications.\n, • Exceptional note and record keeping ability.\n, • Ability to produce quality survey products based on sound judgement and professional knowledge\n, • Must be able to carry out direction, work with others, and maintain communication with management and crew members throughout the day.\n, • Capable of leading and mentoring field and office personnel daily\n, • Ability to manage and organize large complex projects with many moving parts and changing requirements.\n Benefits Artheon offers a competitive compensation package including: \n • Holiday and paid-time-off programs\n, • 401(k) Plan and Match \n, • Career Path Development Program (Management & Technical Career Tracks)\n, • Tuition Reimbursement\n, • Competitive health and dental insurance premiums \n, • Short-Term Disability/Long-Term Disability\n, • Life insurance\n, • Employee Assistant Program (EAP)\n, • Flexible Spending Account\n, • and More\nArtheon is a Drug and Alcohol-Free workplace, an Equal Employment Opportunity employer and E-Verify employer. We are committed to pay transparency and fairness in hiring. This posting complies with the Pay and Benefit Transparency Laws, which requires employers to disclose compensation and benefits information in all job advertisements. About ArtheonDeliver transformative infrastructure solutions that strengthen communities, drive sustainable growth, and accelerate our people’s careers—to provide value added services for our clients by combining local knowledge with national expertise. Our hiring process Stage 1: Applied Stage 2: Initial Screening Stage 3: 1st Interview Stage 4: Offer Stage 5: Hired

CNC Programmer Needed For Leading Manufacturing Company This Jobot Job is hosted by: Kevin Finlay Are you a fit? Easy Apply now by clicking the "Quick Apply" buttonand sending us your resume. Salary: $90,000 - $120,000 per year A bit about us: My client is a world leader in the design and manufacture of solenoid valves and flow control components. As they continue to grow, they are looking to add a CNC Programmer to their team. Why join us? Compensation Up To $120,000 Per Year Great Benefits and 401K Plan Opportunity for long term growth Job Details Work directly with Manufacturing Manager, Machine Operators, Manufacturing Engineering, Design Engineering, and Production Control to produce good programs, keep machines running, and meet production needs. Programming in Mastercam. Processes and controls include, 2-3 axis mill/turning, Okuma/Hass/Mazak/FANUC. CAD in Solidworks. Read, analyze, and interpret blueprint drawings/specifications. Tool and fixture selection, I.E End Mills, drills, inserts, custom fixtures, etc. Organize and maintain programs, setup sheets, and revisions to both. With machine operator or independently, conduct first run prove outs. Revise programs to correct errors or make improvements. Interested in hearing more? Easy Apply now by clicking the "Quick Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Our manufacturing client in Irvington, NJ is looking for a Manufacturing Engineer to support the rubber injection molding operations for medium voltage electrical products by optimizing production processes, troubleshooting equipment, and ensuring high-quality output. This person will act as a "bridge" between product development and production. Monday-Friday, start time 8am Salary starting from $135,000/year, commensurate with experience Responsibilities to include: • Coordinate with production floor staff to identify and trouble-shoot issues, taking corrective and proactive actions to ensure quality., • Utilization of CAD to create, modify, analyze, and optimize designs, significantly improving engineering productivity and design accuracy. Some small fixture design will be required., • Conduct root cause analysis to identify production issues related to quality, efficiency, or equipment failures; implement corrective actions effectively., • Develop and maintain process control plans, inspection criteria, and SOP's for molded components., • Collaborate with QC to investigate non-conformances., • Participate in new product introduction and process qualification activities., • Collaborate with cross-functional teams to drive continuous improvement and reduce scrap and to improve automation and productivity., • Lead project scheduling efforts for new product introductions and process upgrades, ensuring timely completion within budget constraints., • Maintain detailed documentation of processes, schematics, and technical specifications in compliance with ISO 9001 standards. Qualifications • Bachelor's degree in Mechanical, Industrial or Chemical Engineering required, • 3+ years experience working within a manufacturing facility required, • Strong proficiency using CAD software required., • Knowledge of lean manufacturing methodologies and continuous improvement strategies., • Ability to perform root cause analysis using structured problem-solving techniques., • Effective communication skills to collaborate across departments including manufacturing operations and engineering teams. This position is integral to maintaining high-quality production standards while fostering innovation through advanced manufacturing techniques., • Bilingual a plus, • Knowledge of rubber and/or plastic injection molding operations highly desired.

We are seeking a highly skilled CNC Programmer/Operator for our manufacturing client in Irvington, NJ. This role involves programming, setting up, and operating CNC milling machines to produce precision components according to detailed specifications. This person will interpret blueprints, write or edit G-code/CAM programs, calibrate tools, and perform quality inspections using measuring tools like micrometers, ensuring compliance with safety and design specifications. Monday-Friday, start time 6am Salary starting at $45/hour, commensurate with experience Key Responsibilities: • Ensure that machines and surrounding area obey Safety Standards, including usage of proper PPE., • Write and optimize CNC programs using CAD/CAM software or G-code to create precise tool paths, speeds, and feed rates., • Perform machine setup, including loading tools, setting tool offsets, and fixture alignment., • Use precision instruments (calipers, micrometers, indicators) to ensure parts meet blueprint specifications., • Perform routine maintenance on CNC machinery and troubleshoot issues promptly to minimize downtime., • Implement lean manufacturing principles to improve workflow efficiency and reduce waste. Requirements and Qualifications: • 4+ years experience programming and operating CNC milling machines in a manufacturing environment., • Proficient with measuring instruments, reading blueprints and interpreting drawings., • Proficient in Zero Homing and tool offset usage., • Proficient with basic math skills, • Experience with CAM software and G-code., • Bilingual a plus

About Diversified: Diversified is a global leader in audiovisual and media technology. We design and build innovative spaces and experiences for clients across industries such as corporate, entertainment, sports, retail, and government. Our team partners with organizations around the world to create environments that connect people through technology. What to Expect: At Diversified, you'll work on exciting and complex projects with opportunities to grow your career. We offer a collaborative and flexible work environment, competitive pay and benefits, and a culture that values diversity, inclusion, and innovation. If you're ready to grow, create, and make an impact, Diversified is the place to do it. How You'll Contribute: A Senior Project Manager (SPM) is responsible for the scope, schedule, cost, quality and client satisfaction of a project throughout its entire lifecycle, from Initiating through Closing phases. However, the PM depends on the help of other people to perform most of the actual activities of the project. A project manager's role is primarily focused around written and verbal communication to all project stakeholders. The PM is responsible for overseeing and performing project management functions on all Sports Venue projects, budgets and scopes. The PM will act as the person responsible on their assigned projects and have direct control over all project activities. The Senior Project Manager will also mentor other Project Managers with the company. The SPM will be assigned the largest, most complex and sensitive projects. This position will be providing direction to a wide range of internal and external personnel. Location Preference- Virtual (Nationwide) What You'll Do: • Daily activities include project communications, scheduling, task lists for technicians, managing deliverables from engineering, CAD and Programming and overseeing the completion of projects., • The PM is responsible for completing systems integration projects on time, on budget and achieving high customer satisfaction from our customers., • The majority of this employee's time will be spent managing projects and communicating with all project stakeholders., • This person will be held accountable for following and helping to improve the established Diversified processes., • As the primary interface to the client, the project manager develops a strong long-term relationship., • Managing the client relationship, including expectations, communications and satisfaction., • Coordinates and communicates., • Provides clear leadership and ownership for the project within Diversified, including accurate and timely verbal and written communication and follow up., • Coordinates all activities associated with the timely, accurate and on-budget completion of the project, including engaging stakeholders, delegating responsibilities clearly and running client and internal project meetings., • Provides support and assistance to team members as needed in order help them be successful and get the job done., • Ensures appropriate and frequent communication between stakeholders. Resolves destructive conflict., • Designs, plans, and coordinates work teams with regard to Sports Venue installation projects Assumes ownership of individual projects and assignments, • Establishes and maintains communication with Account Executives, Directors, installation technicians, subcontractors, clients, etc., • May be required to regularly lead a team on large projects., • Develops and communicates project updates as required., • Provides constant monitoring of labor, equipment and materials budgets., • Provides and/or directs technical and administrative support to project team members., • Develops and maintains all related project schedules., • Performs field verification of prospective work site. Documents all issues with site and keeps everyone informed of potential issues and solutions., • Coordinates all drawings and documentation between all internal and external stakeholders., • Facilitates and directs design reviews to assure proper documentation in the field. Coordinates all system programming and final checkout of systems. Provides punch-list of remaining tasks after substantial completion., • Contracts with contractors and other trades when necessary., • Monitors status of projects including cost, timing and staffing to ensure timely and accurate completion of projects., • Ensures quality and continuous improvement., • Coordinates training & turnover of projects to client, service department, & sales. Complexity: • Every project is different and every set of project stakeholders is different., • The PM needs to negotiate a very complex set of variables between system design, site conditions and a widely varying set of expectations with multiple stakeholders. The skill of communicating both verbally and in writing to manage all these variables takes a very high level of awareness, emotional intelligence and people management skills., • The PM is constantly managing the forces of change in every project environment. Balancing schedules, budgets, scope, quality and client satisfaction are a very complex set of variables. Decision Making Authority: • Takes full ownership of project., • Acts as the single point of responsibility and accountability for the project., • Ensures schedule performance, quality of solution delivered to client, and client, • satisfaction., • Manages and reports on the project's financials, including ensuring budget performance and profitability., • Ensures timely and correct billings to client., • Demonstrates proactivity, responsiveness, and follow through., • Communicates decision options to stakeholders and manages those decisions., • Manages a complex array of decisions at every point of the project but is rarely the sole decision maker. Physical Working Environment: Physical Demands: • The physical demands described here are representative of those that may be met by an employee., • The employee may be exposed to construction site conditions on a regular basis., • Employee will be responsible for their safety while on job sites and to comply with all safety regulations in place by the GC., • Use of PPE is usually required on job sites., • The employee can typically spend at least 40% of their time on their feet and be required to mobile around the construction site., • The employee must have the ability to occasionally climb ladders, use stairs and lift and/or move materials up to 20 pounds in construction areas., • The individual is regularly required to use keyboards, test equipment and controls required for SI installation projects., • Specific vision abilities required for this job include close vision, distance vision, peripheral vision and depth vision., • When not on construction sites, the employee will experience normal office conditions and be required to use office equipment such as computers, peripherals, etc. Travel: • Frequent travel by car and airplane trips are required. Employee must possess a valid driver's license in their state of residence., • Employee will be required to use their own vehicle and will be reimbursed for mileage at the current corporate rate. Local travel to job sites (within a 2 hour driving distance each way) will make up 70-90% usually but remote travel can be up to 30% of the job at times. 10% remote travel is required on a regular basis. What You'll Bring: Education & Certifications: • Bachelor's degree required or equivalent professional experience, • (Technical, engineering, construction management, or business discipline preferred), • Advanced leadership or project management training preferred, • Industry certifications (AVIXA, broadcast, media systems) preferred, • MS Project Proficient. Mastery of MS Project preferred Required Skills/Qualifications: • Minimum 5-8+ years of progressive project management experience, • Demonstrated success delivering complex, high-value projects, • Prior experience as a Project Manager required, • Strong preference for hands-on experience in:, • Installation, • Engineering, • Field leadership, • Proven ability to lead teams and manage customer relationships in high-pressure environments #LI-Remote What We Offer: We believe great people deserve great benefits. In addition to competitive compensation, we offer a comprehensive benefits package designed to support your health, financial wellbeing, and work-life balance: • Multiple medical plan options to fit you and your family's needs, • HSA & HRA company contributions, • Dental coverage, including orthodontic benefits, and vision plans Company-paid benefits • Basic Life, AD&D, • Short-Term and Long-Term Disability insurance, • Employee Assistance Program (EAP), • Generous paid time off - 3 weeks PTO plus company holidays and floating holidays, • 401k with company match, • Paid maternity leave, • Healthcare and Dependent Care Flexible Spending Accounts (FSA), • A wide range of voluntary benefits including Critical Illness, Hospital Indemnity, Accident Insurance, Pet Insurance, Homeowners and Auto Insurance, Supplemental Life and AD&D coverage, and Legal Services, • Commuter benefits, • And much more

About Diversified: Diversified is a global leader in audio visual and media innovation, recognized for designing and building the world's most experiential environments. Our award-winning team specializes in delivering solutions for the most complex, large-scale and immersive installations. Serving a global clientele that includes major media organizations and retailers, sports and live performance venues, corporate enterprises, and government agencies, Diversified partners with clients to create spaces that bring people together and keep them coming back. What to Expect: At Diversified, we're on a mission to create a world without boundaries, where technology enables all people to connect and experience the moments that matter, wherever they choose to be. With clients spanning the globe and an exciting pipeline of projects across industries, Diversified offers more than just a job. We offer a career path with the flexibility to grow personally and professionally, wherever your ambitions take you. As a Diversified associate, you'll dive headfirst into big, complex, and rewarding projects that push the boundaries of what's possible. Plus, you'll enjoy a flexible work environment, competitive compensation and benefits, and a culture that celebrates diversity and inclusion. IF YOU CAN DREAM IT, YOU CAN DO IT AT DIVERSIFIED. How You'll Contribute: Project manager (PM) is responsible for the scope, schedule, cost, quality and client satisfaction of a project throughout its entire lifecycle, from Initiating through Closing phases. However, the PM depends on the help of other people to perform most of the actual activities of the project. A project manager's role is primarily focused around written and verbal communication to all project stakeholders. The PM is responsible for overseeing, and performing project management functions on all M&E projects, budgets and scopes. The PM will act as the person responsible on their assigned projects and have direct control over all project activities. What You'll Do: Primary Duties and Responsibilities: • Daily activities include project communications, scheduling, task lists for technicians, managing deliverables from engineering, CAD and Programming and overseeing the completion of projects. The PM isresponsible for completing systems integration projects on time, on budget and achieving high customer satisfaction from our customers. The majority of this employee's time will be spent managing projects and communicating with all project stakeholders. This person will be helping to constantly improve the established Diversified processes., • As the primary interface to the client, the project manager develops a strong long-term relationship. He manages the client relationship, including expectations, communications and satisfaction., • Coordinates and communicates., • Provides clear leadership and ownership for the project within Diversified, including accurate and timely verbal and written communication and follow up., • Coordinates all activities associated with the timely, accurate and on-budget completion of the project, including engaging stakeholders, delegating responsibilities clearly and running client and internal project meetings., • Provides support and assistance to team members as needed in order help them be successful and get the job done., • Ensures appropriate and frequent communication between stakeholders. Resolves destructive conflict., • Designs, plans, and coordinates work teams with regard to M&E installation projects., • Assumes ownership of individual projects and assignments., • Establishes and maintains communication with Account Executives, Directors, installation technicians, subcontractors, clients, etc., • Develops and communicates project updates as required., • Provides constant monitoring of labor, equipment and materials budgets., • Provides and/or directs technical and administrative support to project team members., • Develops and maintains all related project schedules., • Performs field verification of prospective work site. Documents all issues with site and keeps everyone informed of potential issues and solutions., • Coordinates all drawings and documentation between all internal and external stakeholders., • Facilitates and directs design reviews to assure proper documentation in the field., • Coordinates all system programming and final checkout of systems. Provides punch-list of remaining tasks after substantial completion., • Contracts with contractors and other trades when necessary., • Monitors status of projects including cost, timing and staffing to ensure timely and accurate completion of projects., • Ensures quality and continuous improvement., • Coordinates training & turnover of projects to client, service department, & sales. Complexity: • Every project is different, and every set of project stakeholders is different. ThePM needs to negotiate a very complex set of variables between system design, site conditions and a widely varying set of expectations with multiple stakeholders. The skill of communicating both verbally and in writing to manage all these variables takes a very high level of awareness, emotional intelligence and people management skills. The PM is constantly managing the forces of change in every project environment. Balancing schedules, budgets, scope, quality and client satisfaction are a very complex set of variables. Decision Making Authority: • Takes full ownership of project., • Acts as thesingle point of responsibility and accountability for the project., • Ensures schedule performance, quality of solution delivered to client, and client satisfaction., • Manages and reports on the project's financials, including ensuring budget performance and profitability.Ensures timely and correct billings to client., • Demonstrates proactivity, responsiveness, and follow through., • Communicates decision options to stakeholders and manages those decisions., • Manages a complex array of decisions at every point of the project but is rarely the sole decision maker. Physical Working Environment: Physical Demands: • The physical demands described here are representative of those that may be met by an employee., • The employee may be exposed to construction site conditions on a regular basis. Employee will be responsible for their safety while on job sites and to comply with all safety regulations in place by the GC. Use of PPE is usually required on job sites., • The employee can typically spend at least 40% of their time on their feet and be required to mobile around the construction site., • The employee must have the ability to occasionally climb ladders, use stairs and lift and/or move materials up to 20 pounds in construction areas., • The individual is regularly required to use keyboards, test equipment and controls required for SI installation projects. Specific vision abilities required for this job include close vision, distance vision, peripheral vision and depth vision., • When not on construction sites, the employee will experience normal office conditions and be required to use office equipment such as computers, peripherals, etc. Travel: Frequent travel by car and occasional airplane trips are required. Employee must possess a valid driver's license in their state of residence. Employee will be required to use their own vehicle and will be reimbursed for mileage at the current corporate rate. Local travel to job sites (within a 2 hour driving distance each way) will make up 70-90% usually but remote travel can be up to 30% of the job at times. 10% remote travel is required on a regular basis. What You'll Bring: Education/Certifications: • A PMP certification from the Project Management Institute is desired., • Other relevant certifications may be required or preferred based on the technology focus of the position. Required Skills/Qualifications: • A minimum of3+ years of experience as a project manager in broadcast / audio visual system installations., • Knowledgeable of low voltage electrical projects., • Strong verbal and written communication skills., • Supervisory and people skills., • The Project Manager shall have the ability and skills to diagnose and resolve complex technical, political, and people related problems., • A project manager typically has these base skills., • Has a high level of both written and verbal communication skills., • Focused on clients and able to understand how they can use technologyfrom Diversified to meet their business needs., • Approachable; works well on teams. Is a natural leader., • Delegates effectively., • Good at setting and managing people's expectations., • Personally organized, manages time well, and sets clear priorities., • Sets an example for preparation, punctuality, and professional appearance., • Excellent at planning., • Forecasts and manages risks., • Problem solver who can remain effective in tense situations. What We Offer: Along with competitive compensation, you will be eligible for the following benefits: • Multiple medical plan options to suit your family's needs, • Dental (including orthodontic coverage) and vision plans, • Company paid Basic Life, AD&D, Short-Term and Long-Term Disability Insurance, and Employee Assistance Plan (EAP), • Healthcare and Dependent Care Flexible Spending Accounts (FSA), • 401k with Employer Match, • Paid Time Off and Paid Holidays, • Voluntary Benefits: Critical Illness, Hospital Indemnity, Accident Insurance, Pet Insurance, Homeowners and Auto Insurance, Supplemental Term and Dependent Life and AD&D, and Legal Services, • Commuter Benefits, • And much more To learn more about becoming part of the Diversified team, visit us at _or email us at careers@onediversified.com. Diversified is an equal opportunity employer committed to fostering an inclusive and diverse workplace. All aspects of employment will be based on job requirements, individual qualifications, merit, performance, and business need. We do not discriminate based on race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, gender identity, or any other protected characteristic under applicable law. We believe in fair and equitable hiring practices and strive to create an environment where all individuals feel valued and empowered. If you require a reasonable accommodation to participate in the application or interview process due to a disability, please contact careers@onediversified.com so we can assist you. Our compensation ranges reflect the cost of labor across several US geographic markets. The pay details below range from our lowest geographic market up to our highest geographic market. Pay is based on several factors including market location and may vary depending on job-related knowledge, skills and experience depending on the position offered, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits.

About Diversified: Diversified is a global leader in audio visual and media innovation, recognized for designing and building the world's most experiential environments. Our award-winning team specializes in delivering solutions for the most complex, large-scale and immersive installations. Serving a global clientele that includes major media organizations and retailers, sports and live performance venues, corporate enterprises, and government agencies, Diversified partners with clients to create spaces that bring people together and keep them coming back. What to Expect: At Diversified, we're on a mission to create a world without boundaries, where technology enables all people to connect and experience the moments that matter, wherever they choose to be. With clients spanning the globe and an exciting pipeline of projects across industries, Diversified offers more than just a job. We offer a career path with the flexibility to grow personally and professionally, wherever your ambitions take you. As a Diversified associate, you'll dive headfirst into big, complex, and rewarding projects that push the boundaries of what's possible. Plus, you'll enjoy a flexible work environment, competitive compensation and benefits, and a culture that celebrates diversity and inclusion. IF YOU CAN DREAM IT, YOU CAN DO IT AT DIVERSIFIED. How You'll Contribute: A Senior Project Manager (SPM) is responsible for the scope, schedule, cost, quality and client satisfaction of a project throughout its entire lifecycle, from Initiating through Closing phases. However, the PM depends on the help of other people to perform most of the actual activities of the project. A project manager's role is primarily focused around written and verbal communication to all project stakeholders. The PM is responsible for overseeing and performing project management functions on all AVE projects, budgets and scopes. The PM will act as the person responsible on their assigned projects and have direct control over all project activities. The Senior Project Manager will also mentor other Project Managers with the company. The SPM will be assigned the largest, most complex and sensitive projects. This position will be providing direction to a wide range of internal and external personnel. Location Preference- Seattle, WA area What You'll Do: • Daily activities include project communications, scheduling, task lists for technicians, managing deliverables from engineering, CAD and Programming and overseeing the completion of projects., • The PM is responsible for completing systems integration projects on time, on budget and achieving high customer satisfaction from our customers., • The majority of this employee's time will be spent managing projects and communicating with all project stakeholders., • This person will be held accountable for following and helping to improve the established Diversified processes., • As the primary interface to the client, the project manager develops a strong long-term relationship., • Managing the client relationship, including expectations, communications and satisfaction., • Coordinates and communicates., • Provides clear leadership and ownership for the project within Diversified, including accurate and timely verbal and written communication and follow up., • Coordinates all activities associated with the timely, accurate and on-budget completion of the project, including engaging stakeholders, delegating responsibilities clearly and running client and internal project meetings., • Provides support and assistance to team members as needed in order help them be successful and get the job done., • Ensures appropriate and frequent communication between stakeholders. Resolves destructive conflict., • Designs, plans, and coordinates work teams with regard to AVE installation projects Assumes ownership of individual projects and assignments, • Establishes and maintains communication with Account Executives, Directors, installation technicians, subcontractors, clients, etc., • May be required to regularly lead a team on large projects., • Develops and communicates project updates as required., • Provides constant monitoring of labor, equipment and materials budgets., • Provides and/or directs technical and administrative support to project team members., • Develops and maintains all related project schedules., • Performs field verification of prospective work site. Documents all issues with site and keeps everyone informed of potential issues and solutions., • Coordinates all drawings and documentation between all internal and external stakeholders., • Facilitates and directs design reviews to assure proper documentation in the field. Coordinates all system programming and final checkout of systems. Provides punch-list of remaining tasks after substantial completion., • Contracts with contractors and other trades when necessary., • Monitors status of projects including cost, timing and staffing to ensure timely and accurate completion of projects., • Ensures quality and continuous improvement., • Coordinates training & turnover of projects to client, service department, & sales. Complexity: • Every project is different and every set of project stakeholders is different., • The PM needs to negotiate a very complex set of variables between system design, site conditions and a widely varying set of expectations with multiple stakeholders. The skill of communicating both verbally and in writing to manage all these variables takes a very high level of awareness, emotional intelligence and people management skills., • The PM is constantly managing the forces of change in every project environment. Balancing schedules, budgets, scope, quality and client satisfaction are a very complex set of variables. Decision Making Authority: • Takes full ownership of project., • Acts as the single point of responsibility and accountability for the project., • Ensures schedule performance, quality of solution delivered to client, and client, • satisfaction., • Manages and reports on the project's financials, including ensuring budget performance and profitability., • Ensures timely and correct billings to client., • Demonstrates proactivity, responsiveness, and follow through., • Communicates decision options to stakeholders and manages those decisions., • Manages a complex array of decisions at every point of the project but is rarely the sole decision maker. Physical Working Environment: Physical Demands: • The physical demands described here are representative of those that may be met by an employee., • The employee may be exposed to construction site conditions on a regular basis., • Employee will be responsible for their safety while on job sites and to comply with all safety regulations in place by the GC., • Use of PPE is usually required on job sites., • The employee can typically spend at least 40% of their time on their feet and be required to mobile around the construction site., • The employee must have the ability to occasionally climb ladders, use stairs and lift and/or move materials up to 20 pounds in construction areas., • The individual is regularly required to use keyboards, test equipment and controls required for SI installation projects., • Specific vision abilities required for this job include close vision, distance vision, peripheral vision and depth vision., • When not on construction sites, the employee will experience normal office conditions and be required to use office equipment such as computers, peripherals, etc. Travel: • Frequent travel by car and occasional airplane trips are required. Employee must possess a valid driver's license in their state of residence., • Employee will be required to use their own vehicle and will be reimbursed for mileage at the current corporate rate. Local travel to job sites (within a 2 hour driving distance each way) will make up 70-90% usually but remote travel can be up to 30% of the job at times. 10% remote travel is required on a regular basis. What You'll Bring: Education & Certifications: • Bachelor's degree required or equivalent professional experience, • (Technical, engineering, construction management, or business discipline preferred), • PMP certification required, • Advanced leadership or project management training preferred, • Industry certifications (AVIXA, broadcast, media systems) preferred Required Skills/Qualifications: • Minimum 5-8+ years of progressive project management experience, • Demonstrated success delivering complex, high-value projects, • Prior experience as a Project Manager required, • Strong preference for hands-on experience in:, • Installation, • Engineering, • Field leadership, • Proven ability to lead teams and manage customer relationships in high-pressure environments A project manager typically has these base skills. • Has a high level of both written and verbal communication skills., • Focused on clients and able to understand how they can use technology from Diversified to meet their business needs., • Approachable; works well on teams. Is a natural leader., • Delegates effectively., • Good at setting and managing people's expectations., • Personally organized, manages time well, and sets clear priorities. Sets an example for, • preparation, punctuality, and professional appearance., • Excellent at planning., • Forecasts and manages risks., • Problem solver who can remain effective in tense situations. What We Offer: Along with competitive compensation, you will be eligible for the following benefits: • Multiple medical plan options to suit your family's needs, • Dental (including orthodontic coverage) and vision plans, • Company paid Basic Life, AD&D, Short-Term and Long-Term Disability Insurance, and Employee Assistance Plan (EAP), • Healthcare and Dependent Care Flexible Spending Accounts (FSA), • 401k with Employer Match, • Paid Time Off and Paid Holidays, • Voluntary Benefits: Critical Illness, Hospital Indemnity, Accident Insurance, Pet Insurance, Homeowners and Auto Insurance, Supplemental Term and Dependent Life and AD&D, and Legal Services, • Commuter Benefits, • And much more To learn more about becoming part of the Diversified team, visit us at _or email us at careers@onediversified.com. Diversified is an equal opportunity employer committed to fostering an inclusive and diverse workplace. All aspects of employment will be based on job requirements, individual qualifications, merit, performance, and business need. We do not discriminate based on race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, gender identity, or any other protected characteristic under applicable law. We believe in fair and equitable hiring practices and strive to create an environment where all individuals feel valued and empowered. If you require a reasonable accommodation to participate in the application or interview process due to a disability, please contact careers@onediversified.com so we can assist you. Our compensation ranges reflect the cost of labor across several US geographic markets. The pay details below range from our lowest geographic market up to our highest geographic market. Pay is based on several factors including market location and may vary depending on job-related knowledge, skills and experience depending on the position offered, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits.

About Diversified: Diversified is a global leader in audiovisual and media technology. We design and build innovative spaces and experiences for clients across industries such as corporate, entertainment, sports, retail, and government. Our team partners with organizations around the world to create environments that connect people through technology. What to Expect: At Diversified, you'll work on exciting and complex projects with opportunities to grow your career. We offer a collaborative and flexible work environment, competitive pay and benefits, and a culture that values diversity, inclusion, and innovation. If you're ready to grow, create, and make an impact, Diversified is the place to do it. How You'll Contribute: A project manager (PM) is responsible for the scope, schedule, cost, quality and client satisfaction of a project throughout its entire lifecycle, from Initiating through Closing phases. However, the PM depends on the help of other people to perform most of the actual activities of the project. A project manager's role is primarily focused around written and verbal communication to all project stakeholders. The PM is responsible for overseeing and performing project management functions on all AVE projects, budgets and scopes. The PM will act as the person responsible on their assigned projects and have direct control over all project activities. Location: Greater Los Angeles area. What You'll Do: Daily activities include project communications, scheduling, task lists for technicians, managing deliverables from engineering, CAD and Programming and overseeing the completion of projects. The PM is responsible for completing systems integration projects on time, on budget and achieving high customer satisfaction from our customers. The majority of this employee's time will be spent managing projects and communicating with all project stakeholders. This person will be helping to constantly improve the established Diversified processes. As the primary interface to the client, the project manager develops a strong long-term relationship. He manages the client relationship, including expectations, communications and satisfaction. • Coordinates and communicates., • Provides clear leadership and ownership for the project within Diversified, including accurate and timely verbal and written communication and follow up., • Coordinates all activities associated with the timely, accurate and on-budget completion of the project, including engaging stakeholders, delegating responsibilities clearly and running client and internal project meetings., • Provides support and assistance to team members as needed in order help them be successful and get the job done., • Ensures appropriate and frequent communication between stakeholders., • Resolves destructive conflict., • Designs, plans, and coordinates work teams with regard to AVE installation projects, • Assumes ownership of individual projects and assignments, • Establishes and maintains communication with Account Executives, Directors, installation technicians, subcontractors, clients, etc. • Develops and communicates project updates as required., • Provides constant monitoring of labor, equipment and materials budgets., • Provides and/or directs technical and administrative support to project team members., • Develops and maintains all related project schedules., • Performs field verification of prospective work site. Documents all issues with site and keeps everyone informed of potential issues and solutions., • Coordinates all drawings and documentation between all internal and external stakeholders., • Facilitates and directs design reviews to assure proper documentation in the field., • Coordinates all system programming and final checkout of systems. Provides punch-list of remaining tasks after substantial completion. • Contracts with contractors and other trades when necessary., • Monitors status of projects including cost, timing and staffing to ensure timely and accurate completion of projects. • Ensures quality and continuous improvement., • Coordinates training & turnover of projects to client, service department, & sales. Complexity: Every project is different and every set of project stakeholders is different. The PM needs to negotiate a very complex set of variables between system design, site conditions and a widely varying set of expectations with multiple stakeholders. The skill of communicating both verbally and in writing to manage all these variables takes a very high level of awareness, emotional intelligence and people management skills. The PM is constantly managing the forces of change in every project environment. Balancing schedules, budgets, scope, quality and client satisfaction are a very complex set of variables. Decision Making Authority: 1. Takes full ownership of project a. Acts as the single point of responsibility and accountability for the project. b. Ensures schedule performance, quality of solution delivered to client, and client satisfaction. c. Manages and reports on the project's financials, including ensuring budget performance and profitability. Ensures timely and correct billings to client. d. Demonstrates proactivity, responsiveness, and follow through. 1. Communicates decision options to stakeholders and manages those decisions., 2. Manages a complex array of decisions at every point of the project but is rarely the sole decision maker. Physical Working Environment: Physical Demands: The physical demands described here are representative of those that may be met by an employee. The employee may be exposed to construction site conditions on a regular basis. Employee will be responsible for their safety while on job sites and to comply with all safety regulations in place by the GC. Use of PPE is usually required on job sites. The employee can typically spend at least 40% of their time on their feet and be required to mobile around the construction site. The employee must have the ability to occasionally climb ladders, use stairs and lift and/or move materials up to 20 pounds in construction areas. The individual is regularly required to use keyboards, test equipment and controls required for SI installation projects. Specific vision abilities required for this job include close vision, distance vision, peripheral vision and depth vision. When not on construction sites, the employee will experience normal office conditions and be required to use office equipment such as computers, peripherals, etc. Travel: Frequent travel by car and occasional airplane trips are required. Employee must possess a valid driver's license in their state of residence. Employee will be required to use their own vehicle and will be reimbursed for mileage at the current corporate rate. Local travel to job sites (within a 2 hour driving distance each way) will make up 70-90% usually but remote travel can be up to 30% of the job at times. 10% remote travel is required on a regular basis. What You'll Bring: Education/ Certifications: • Associates/Bachelors degree required and/or equivalent experience., • A PMP certification from the Project Management Institute is desired., • AVIXA CTS certification, • Other relevant certifications may be required or preferred based on the technology focus of the position. Required Skills/Qualifications: • A minimum of 3 years of experience as a project manager in commercial construction trades or AV project setting required., • Familiarity with audio/video systems installations., • Knowledgeable of low voltage electrical projects., • Strong verbal and written communication skills., • Supervisory and people skills., • The Project Manager shall have the ability and skills to diagnose and resolve complex technical, political and people related problems. A project manager typically has these base skills. 1. Has a high level of both written and verbal communication skills., 2. Focused on clients and able to understand how they can use technology from Diversified to meet their business needs. 1. Approachable; works well on teams. Is a natural leader., 2. Delegates effectively., 3. Good at setting and managing people's expectations., 4. Personally organized, manages time well, and sets clear priorities. Sets an example for preparation, punctuality, and professional appearance. 1. Excellent at planning., 2. Forecasts and manages risks., 3. Problem solver who can remain effective in tense situations. What We Offer: We believe great people deserve great benefits. In addition to competitive compensation, we offer a comprehensive benefits package designed to support your health, financial wellbeing, and work-life balance: • Multiple medical plan options to fit you and your family's needs, • HSA & HRA company contributions, • Dental coverage, including orthodontic benefits, and vision plans Company-paid benefits • Basic Life, AD&D, • Short-Term and Long-Term Disability insurance, • Employee Assistance Program (EAP), • Generous paid time off - 3 weeks PTO plus company holidays and floating holidays, • 401k with company match, • Paid maternity leave, • Healthcare and Dependent Care Flexible Spending Accounts (FSA), • A wide range of voluntary benefits including Critical Illness, Hospital Indemnity, Accident Insurance, Pet Insurance, Homeowners and Auto Insurance, Supplemental Life and AD&D coverage, and Legal Services, • Commuter benefits, • And much more

About Diversified: Diversified is a global leader in audio visual and media innovation, recognized for designing and building the world's most experiential environments. Our award-winning team specializes in delivering solutions for the most complex, large-scale and immersive installations. Serving a global clientele that includes major media organizations and retailers, sports and live performance venues, corporate enterprises, and government agencies, Diversified partners with clients to create spaces that bring people together and keep them coming back. What to Expect: At Diversified, we're on a mission to create a world without boundaries, where technology enables all people to connect and experience the moments that matter, wherever they choose to be. With clients spanning the globe and an exciting pipeline of projects across industries, Diversified offers more than just a job. We offer a career path with the flexibility to grow personally and professionally, wherever your ambitions take you. As a Diversified associate, you'll dive headfirst into big, complex, and rewarding projects that push the boundaries of what's possible. Plus, you'll enjoy a flexible work environment, competitive compensation and benefits, and a culture that celebrates diversity and inclusion. IF YOU CAN DREAM IT, YOU CAN DO IT AT DIVERSIFIED. How You'll Contribute: A project manager (PM) is responsible for the scope, schedule, cost, quality and client satisfaction of a project throughout its entire lifecycle, from Initiating through Closing phases. However, the PM depends on the help of other people to perform most of the actual activities of the project. A project manager's role is primarily focused around written and verbal communication to all project stakeholders. The PM is responsible for overseeing and performing project management functions on all AVE projects, budgets and scopes. The PM will act as the person responsible on their assigned projects and have direct control over all project activities. Location: Greater Los Angeles area. What You'll Do: Daily activities include project communications, scheduling, task lists for technicians, managing deliverables from engineering, CAD and Programming and overseeing the completion of projects. The PM is responsible for completing systems integration projects on time, on budget and achieving high customer satisfaction from our customers. The majority of this employee's time will be spent managing projects and communicating with all project stakeholders. This person will be helping to constantly improve the established Diversified processes. As the primary interface to the client, the project manager develops a strong long-term relationship. He manages the client relationship, including expectations, communications and satisfaction. • Coordinates and communicates., • Provides clear leadership and ownership for the project within Diversified, including accurate and timely verbal and written communication and follow up., • Coordinates all activities associated with the timely, accurate and on-budget completion of the project, including engaging stakeholders, delegating responsibilities clearly and running client and internal project meetings., • Provides support and assistance to team members as needed in order help them be successful and get the job done., • Ensures appropriate and frequent communication between stakeholders., • Resolves destructive conflict., • Designs, plans, and coordinates work teams with regard to AVE installation projects, • Assumes ownership of individual projects and assignments, • Establishes and maintains communication with Account Executives, Directors, installation technicians, subcontractors, clients, etc. • Develops and communicates project updates as required., • Provides constant monitoring of labor, equipment and materials budgets., • Provides and/or directs technical and administrative support to project team members., • Develops and maintains all related project schedules., • Performs field verification of prospective work site. Documents all issues with site and keeps everyone informed of potential issues and solutions., • Coordinates all drawings and documentation between all internal and external stakeholders., • Facilitates and directs design reviews to assure proper documentation in the field., • Coordinates all system programming and final checkout of systems. Provides punch-list of remaining tasks after substantial completion. • Contracts with contractors and other trades when necessary., • Monitors status of projects including cost, timing and staffing to ensure timely and accurate completion of projects. • Ensures quality and continuous improvement., • Coordinates training & turnover of projects to client, service department, & sales. Complexity: Every project is different and every set of project stakeholders is different. The PM needs to negotiate a very complex set of variables between system design, site conditions and a widely varying set of expectations with multiple stakeholders. The skill of communicating both verbally and in writing to manage all these variables takes a very high level of awareness, emotional intelligence and people management skills. The PM is constantly managing the forces of change in every project environment. Balancing schedules, budgets, scope, quality and client satisfaction are a very complex set of variables. Decision Making Authority: 1. Takes full ownership of project a. Acts as the single point of responsibility and accountability for the project. b. Ensures schedule performance, quality of solution delivered to client, and client satisfaction. c. Manages and reports on the project's financials, including ensuring budget performance and profitability. Ensures timely and correct billings to client. d. Demonstrates proactivity, responsiveness, and follow through. 1. Communicates decision options to stakeholders and manages those decisions., 2. Manages a complex array of decisions at every point of the project but is rarely the sole decision maker. Physical Working Environment: Physical Demands: The physical demands described here are representative of those that may be met by an employee. The employee may be exposed to construction site conditions on a regular basis. Employee will be responsible for their safety while on job sites and to comply with all safety regulations in place by the GC. Use of PPE is usually required on job sites. The employee can typically spend at least 40% of their time on their feet and be required to mobile around the construction site. The employee must have the ability to occasionally climb ladders, use stairs and lift and/or move materials up to 20 pounds in construction areas. The individual is regularly required to use keyboards, test equipment and controls required for SI installation projects. Specific vision abilities required for this job include close vision, distance vision, peripheral vision and depth vision. When not on construction sites, the employee will experience normal office conditions and be required to use office equipment such as computers, peripherals, etc. Travel: Frequent travel by car and occasional airplane trips are required. Employee must possess a valid driver's license in their state of residence. Employee will be required to use their own vehicle and will be reimbursed for mileage at the current corporate rate. Local travel to job sites (within a 2 hour driving distance each way) will make up 70-90% usually but remote travel can be up to 30% of the job at times. 10% remote travel is required on a regular basis. What You'll Bring: Education/ Certifications: • Associates/Bachelors degree required and/or equivalent experience., • A PMP certification from the Project Management Institute is desired., • AVIXA CTS certification, • Other relevant certifications may be required or preferred based on the technology focus of the position. Required Skills/Qualifications: • A minimum of 3 years of experience as a project manager in commercial construction trades and settings is required., • Familiarity with audio/video systems installations., • Knowledgeable of low voltage electrical projects., • Strong verbal and written communication skills., • Supervisory and people skills., • The Project Manager shall have the ability and skills to diagnose and resolve complex technical, political and people related problems. A project manager typically has these base skills. 1. Has a high level of both written and verbal communication skills., 2. Focused on clients and able to understand how they can use technology from Diversified to meet their business needs. 1. Approachable; works well on teams. Is a natural leader., 2. Delegates effectively., 3. Good at setting and managing people's expectations., 4. Personally organized, manages time well, and sets clear priorities. Sets an example for preparation, punctuality, and professional appearance. 1. Excellent at planning., 2. Forecasts and manages risks., 3. Problem solver who can remain effective in tense situations. What We Offer: Along with competitive compensation, you will be eligible for the following benefits: • Multiple medical plan options to suit your family's needs, • Dental (including orthodontic coverage) and vision plans, • Company paid Basic Life, AD&D, Short-Term and Long-Term Disability Insurance, and Employee Assistance Plan (EAP), • Healthcare and Dependent Care Flexible Spending Accounts (FSA), • 401k with Employer Match, • Paid Time Off and Paid Holidays, • Voluntary Benefits: Critical Illness, Hospital Indemnity, Accident Insurance, Pet Insurance, Homeowners and Auto Insurance, Supplemental Term and Dependent Life and AD&D, and Legal Services, • Commuter Benefits, • And much more To learn more about becoming part of the Diversified team, visit us at _or email us at careers@onediversified.com. Diversified is an equal opportunity employer committed to fostering an inclusive and diverse workplace. All aspects of employment will be based on job requirements, individual qualifications, merit, performance, and business need. We do not discriminate based on race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, gender identity, or any other protected characteristic under applicable law. We believe in fair and equitable hiring practices and strive to create an environment where all individuals feel valued and empowered. If you require a reasonable accommodation to participate in the application or interview process due to a disability, please contact careers@onediversified.com so we can assist you. Our compensation ranges reflect the cost of labor across several US geographic markets. The pay details below range from our lowest geographic market up to our highest geographic market. Pay is based on several factors including market location and may vary depending on job-related knowledge, skills and experience depending on the position offered, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits.

About Diversified: Diversified is a global leader in audio visual and media innovation, recognized for designing and building the world's most experiential environments. Our award-winning team specializes in delivering solutions for the most complex, large-scale and immersive installations. Serving a global clientele that includes major media organizations and retailers, sports and live performance venues, corporate enterprises, and government agencies, Diversified partners with clients to create spaces that bring people together and keep them coming back. What to Expect: At Diversified, we're on a mission to create a world without boundaries, where technology enables all people to connect and experience the moments that matter, wherever they choose to be. With clients spanning the globe and an exciting pipeline of projects across industries, Diversified offers more than just a job. We offer a career path with the flexibility to grow personally and professionally, wherever your ambitions take you. As a Diversified associate, you'll dive headfirst into big, complex, and rewarding projects that push the boundaries of what's possible. Plus, you'll enjoy a flexible work environment, competitive compensation and benefits, and a culture that celebrates diversity and inclusion. IF YOU CAN DREAM IT, YOU CAN DO IT AT DIVERSIFIED. How You'll Contribute: Project manager (PM) is responsible for the scope, schedule, cost, quality and client satisfaction of a project throughout its entire lifecycle, from Initiating through Closing phases. However, the PM depends on the help of other people to perform most of the actual activities of the project. A project manager's role is primarily focused around written and verbal communication to all project stakeholders. The PM is responsible for overseeing, and performing project management functions on all M&E projects, budgets and scopes. The PM will act as the person responsible on their assigned projects and have direct control over all project activities. What You'll Do: Primary Duties and Responsibilities: • Daily activities include project communications, scheduling, task lists for technicians, managing deliverables from engineering, CAD and Programming and overseeing the completion of projects. The PM isresponsible for completing systems integration projects on time, on budget and achieving high customer satisfaction from our customers. The majority of this employee's time will be spent managing projects and communicating with all project stakeholders. This person will be helping to constantly improve the established Diversified processes., • As the primary interface to the client, the project manager develops a strong long-term relationship. He manages the client relationship, including expectations, communications and satisfaction., • Coordinates and communicates., • Provides clear leadership and ownership for the project within Diversified, including accurate and timely verbal and written communication and follow up., • Coordinates all activities associated with the timely, accurate and on-budget completion of the project, including engaging stakeholders, delegating responsibilities clearly and running client and internal project meetings., • Provides support and assistance to team members as needed in order help them be successful and get the job done., • Ensures appropriate and frequent communication between stakeholders. Resolves destructive conflict., • Designs, plans, and coordinates work teams with regard to M&E installation projects., • Assumes ownership of individual projects and assignments., • Establishes and maintains communication with Account Executives, Directors, installation technicians, subcontractors, clients, etc., • Develops and communicates project updates as required., • Provides constant monitoring of labor, equipment and materials budgets., • Provides and/or directs technical and administrative support to project team members., • Develops and maintains all related project schedules., • Performs field verification of prospective work site. Documents all issues with site and keeps everyone informed of potential issues and solutions., • Coordinates all drawings and documentation between all internal and external stakeholders., • Facilitates and directs design reviews to assure proper documentation in the field., • Coordinates all system programming and final checkout of systems. Provides punch-list of remaining tasks after substantial completion., • Contracts with contractors and other trades when necessary., • Monitors status of projects including cost, timing and staffing to ensure timely and accurate completion of projects., • Ensures quality and continuous improvement., • Coordinates training & turnover of projects to client, service department, & sales. Complexity: • Every project is different, and every set of project stakeholders is different. ThePM needs to negotiate a very complex set of variables between system design, site conditions and a widely varying set of expectations with multiple stakeholders. The skill of communicating both verbally and in writing to manage all these variables takes a very high level of awareness, emotional intelligence and people management skills. The PM is constantly managing the forces of change in every project environment. Balancing schedules, budgets, scope, quality and client satisfaction are a very complex set of variables. Decision Making Authority: • Takes full ownership of project., • Acts as thesingle point of responsibility and accountability for the project., • Ensures schedule performance, quality of solution delivered to client, and client satisfaction., • Manages and reports on the project's financials, including ensuring budget performance and profitability.Ensures timely and correct billings to client., • Demonstrates proactivity, responsiveness, and follow through., • Communicates decision options to stakeholders and manages those decisions., • Manages a complex array of decisions at every point of the project but is rarely the sole decision maker. Physical Working Environment: Physical Demands: • The physical demands described here are representative of those that may be met by an employee., • The employee may be exposed to construction site conditions on a regular basis. Employee will be responsible for their safety while on job sites and to comply with all safety regulations in place by the GC. Use of PPE is usually required on job sites., • The employee can typically spend at least 40% of their time on their feet and be required to mobile around the construction site., • The employee must have the ability to occasionally climb ladders, use stairs and lift and/or move materials up to 20 pounds in construction areas., • The individual is regularly required to use keyboards, test equipment and controls required for SI installation projects. Specific vision abilities required for this job include close vision, distance vision, peripheral vision and depth vision., • When not on construction sites, the employee will experience normal office conditions and be required to use office equipment such as computers, peripherals, etc. Travel: Frequent travel by car and occasional airplane trips are required. Employee must possess a valid driver's license in their state of residence. Employee will be required to use their own vehicle and will be reimbursed for mileage at the current corporate rate. Local travel to job sites (within a 2 hour driving distance each way) will make up 70-90% usually but remote travel can be up to 30% of the job at times. 10% remote travel is required on a regular basis. What You'll Bring: Education/Certifications: • A PMP certification from the Project Management Institute is desired., • Other relevant certifications may be required or preferred based on the technology focus of the position. Required Skills/Qualifications: • A minimum of3+ years of experience as a project manager in broadcast / audio visual system installations., • Knowledgeable of low voltage electrical projects., • Strong verbal and written communication skills., • Supervisory and people skills., • The Project Manager shall have the ability and skills to diagnose and resolve complex technical, political, and people related problems., • A project manager typically has these base skills., • Has a high level of both written and verbal communication skills., • Focused on clients and able to understand how they can use technologyfrom Diversified to meet their business needs., • Approachable; works well on teams. Is a natural leader., • Delegates effectively., • Good at setting and managing people's expectations., • Personally organized, manages time well, and sets clear priorities., • Sets an example for preparation, punctuality, and professional appearance., • Excellent at planning., • Forecasts and manages risks., • Problem solver who can remain effective in tense situations. What We Offer: Along with competitive compensation, you will be eligible for the following benefits: • Multiple medical plan options to suit your family's needs, • Dental (including orthodontic coverage) and vision plans, • Company paid Basic Life, AD&D, Short-Term and Long-Term Disability Insurance, and Employee Assistance Plan (EAP), • Healthcare and Dependent Care Flexible Spending Accounts (FSA), • 401k with Employer Match, • Paid Time Off and Paid Holidays, • Voluntary Benefits: Critical Illness, Hospital Indemnity, Accident Insurance, Pet Insurance, Homeowners and Auto Insurance, Supplemental Term and Dependent Life and AD&D, and Legal Services, • Commuter Benefits, • And much more To learn more about becoming part of the Diversified team, visit us at _or email us at careers@onediversified.com. Diversified is an equal opportunity employer committed to fostering an inclusive and diverse workplace. All aspects of employment will be based on job requirements, individual qualifications, merit, performance, and business need. We do not discriminate based on race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, gender identity, or any other protected characteristic under applicable law. We believe in fair and equitable hiring practices and strive to create an environment where all individuals feel valued and empowered. If you require a reasonable accommodation to participate in the application or interview process due to a disability, please contact careers@onediversified.com so we can assist you. Our compensation ranges reflect the cost of labor across several US geographic markets. The pay details below range from our lowest geographic market up to our highest geographic market. Pay is based on several factors including market location and may vary depending on job-related knowledge, skills and experience depending on the position offered, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits.

Job Description CNC MILL MACHINIST / SET UP - All Shifts -- Manufacturing/Machine Shop N.J. Precision Technologies, Inc. – Mountainside, NJ Job Description PLEASE READ BEFORE APPLYING: • MINIMUM 5 YEARS SET-UP EXPERIENCE - CNC MILLING or TURNING SET-UP EXPERIENCE REQUIRED, • FULL TIME : FIRST SHIFT, SECOND SHIFT, THIRD SHIFT, WEEKEND SHIFTS AVAILABLE, • ALL HAAS CNC MACHINES and Kitamura, • STRONG WORKING KNOWLEDGE OF SET-UP TECHNIQUES FOR PRODUCTION AND PROTOTYPE., • STRONG WORKING KNOWLEDGE OF CNC PROGRAMMING AND EDITING WITH G & M CODES OR PROGRAMMING SOFTWARE., • ABILITY TO SET-UP & OPERATE USING VICES OR SIMILAR TOOLING HARDWARE AND FIXTURES., • MUST HAVE EXPERIENCE INSPECTING PARTS AND READING MICROMETER , CALIPER, HEIGHT GAGE AND DIAL INDICATOR, • BLUEPRINT READING A MUST., • FAST PACED ENVIRONMENT. Summary Established, ISO-certified contract manufacturer seeking full-time, dedicated CNC MACHINIST for an ultra-high tech, All Haas CNC Mill department. Primarily working in the Aerospace and Medical device industries. Employees receive top pay and benefits, including medical, prescription, dental, vision, 401K with match, etc. Our modern, air-conditioned facility is located in Mountainside, N.J. Responsibilities • Performs SET UP, PROGRAM TEST, FIRST PIECE "PROVE-OUT" RUN, in-process inspections, and CNC of precision-machined parts., • Works with production and engineering teams to address and resolve production issues in CNC Milling., • Responsible for selecting correct tooling hardware and measurement equipment., • Responsible for ensuring that the machines are well maintained ., • Working in accordance with ISO requirements., • Must be able to work independently. Requirements • Education: High school diploma or GED., • Experience: Minimum 5 years CNC Machining / Milling experience in a machine shop or manufacturing environment., • Measurement and inspection skills a must., • Strong knowledge of Blueprint reading with GD&T required., • Working within the ISO 9001 quality standard required. Skills, Knowledge, Abilities • Must have a strong aptitude in mechanical blueprints and drawings, • Must have a working knowledge of CAD systems., • Must be very detail oriented., • Strong math skills., • Ability to follow process plans, routers and inspection plans., • Has a strong background with workplace safety, OSHA regulations., • Must be able to effectively communicate with employees of varying education levels., • Comfortable working with very tight , "tenths" tolerances., • Must be experienced in measuring tools such as micrometers, calipers, height gage, dial indicators. ------------------------------------------------------------ 1.0 JOB DESCRIPTION SUMMARY 1.1 This position establishes the authority, reporting relationships, tasks and duties with performance standards for the CNC Specialist. 2.0 JOB TITLE 2.1 CNC Specialist 3.0 REPORTING RELATIONSHIPS 3.1 The CNC Specialist reports to the CNC Manager. 4.0 REQUIREMENTS 4.1 Education Required: High School diploma or GED. Preferred: Vocational School Certificate / Associates degree in Mechanical, MFG, IND Engineering technology. 4.2 Licensing, Registration, and certification Required: None. Preferred: None. 4.3 Experience Required: A minimum of one year experience in CNC or tooling production. 4.4 Skills, Knowledge, Abilities 4.4.1 Must have strong math skills. 4.4.2 Ability to read and understand engineering drawings. 4.4.3 Must be able to effectively communicate with other employees of varying education levels. 4.5 Physical Requirements 4.5 The physical requirements are stressful with the majority of time spent standing working with machinery. This position requires manual dexterity of the hands and the normal bending and twisting associated with plant operations. Walking, turning the head and torso, reaching, grasping, bending, stooping, kneeling and flexing the arms, legs, wrists, and fingers and the ability to lift at least forty (40) pounds. Must be able to work in areas with moderate to high noise levels. Must be able to constantly kneel, squat, climb and have full bending abilities at the waist (touch the toes). The body senses of sight (not color blind), hearing (safety) is required. Good vision to read diagrams and business documents. Must be able to wear safety glasses and hearing protection for prolong periods of time. 4.6 Mental: Basic math skills, mechanical engineering understanding, blueprint reading, as well as reading, writing and spelling and the ability to communicate clearly and effectively in English. 5.0 WORKING CONDITIONS 5.1 The majority of the time (95%) will be spent in a non-smoking plant environment. Temperatures will remain consistent throughout the year. Noise levels will be high in the plant area and moderate in the office area. Work hours will be dependant upon the weekly production and shipping schedules. Work hours may be long when specific projects are due, therefore, some extended schedules will be necessary. 6.0 TASKS AND DUTIES 6.1 Responsible for the proper operation of the machines. 6.2 Responsible for performing the daily machine set up process – clean the machine, complete the set up the machine for the first job. 6.3 Responsible for producing high quality finished products in accordance with the customer’s requirements. 6.4 Responsible for completing the job within the allotted job budget dollars. 6.5 Completes the bead blasting process when necessary. 6.6 Responsible for the proper operation and maintenance of the machines. Ensures the machine is maintained on a preventative basis. 6.7 Responsible for the machine programming functions. 6.8 Responsible for performing a quality control check on all jobs. 6.9 Responsible for setting up the machines for optimized speed and performance. 6.10 Responsible for completing the work in a safe manner. 6.11 Responsible for ensuring the shop area is clean and organized. 6.12 Responsible for accurately recording the time spent against the appropriate job. 6.13 Responsible for completing the work in accordance with ISO 9000 standards. 6.14 Responsible for working closely with the Manager with the development and implementation of the agreed upon training plan and schedule. 6.15 Ensures personal adherence to the company policies and practices. 6.16 Performs any other duties as may be assigned by the Manager. 7.0 MEASUREMENTS OF PERFORMANCE 7.1 Ability to produce each job in accordance with the customer’s requirements. 7.2 Ability to produce each job in accordance with the allotted number of production hours and optimize. 7.3 Ability to set-up as per the plot/print/router/set-up sheets in a timely manner. 7.4 Ability to edit programs (G & Mo codes and/or Mastercam) for efficient and practical parts production. 7.5 Ability to transmit program from database to local PC and to machines. 7.6 Ability to account and record the hours spent per job. 7.7 Consistently maintains the work area in a clean, organized and professional manner – ie: clean floors, machines, tools secured, etc. 7.8 Ability to work with minimal supervision. 7.9 Ability to service and maintain the machines to eliminate/minimize machine downtime 7.10 Ability to adhere to the company’s policies and procedures. 7.11 Has demonstrated a working knowledge level of the standard operating procedures as defined by ISO 9000. 7.12 Ability to work within the company’s safety practices and procedures. 7.13 Ability to complete the assigned training schedule. ------------------------------------------------------------------------------------------ Company DescriptionNew Jersey Precision Technologies, Inc. is a high-tech Manufacturer located in Mountainside, New Jersey. We specialize in electrical discharge machining (EDM) and precision manufacturing of all mechanical components for the aerospace and medical device industries as well as tooling for the plastics industry and stamping industry. Our modern facility is fully climate controlled and utilizes more than 60 EDM and CNC machines. Our EDM & CNC departments are running 24 hours per day, 7 days per week. Our CNC Lathe, CNC Mill, Sinker EDM, Wire EDM & Small Hole Drilling EDM machines are state-of-the-art and the latest generation available. Our CNC Technicians and Electrical Discharge Machining technicians perform CNC Programming, CAD, Automated Set-ups and efficient production & prototype operations. NJPT believes in continual improvement programs including continual employee training programs. In addition to off sight custom training, in-house training and other learning methods, NJPT offers a complete tuition reimbursement program from those FULL-TIME individuals who may want to earn or complete a college degree. The NJPT FULL-TIME benefits package is outstanding with matching 401K retirment plan, profit sharing, Medical plan, Prescription plan, Dental & Optical plans, Credit Union, etc. NJPT is a US Department of Defense contractor and controlled by ITAR (International Traffic in Arms) government regulations to only hire citizens of the United States or those individuals with a US permanent resident green card. An equal opportunity employer, NJPT is committed to its employees and employee satisfaction. NJPT is a great place to work and a great place to grow. Please visit our Website: www.njpt.comNew Jersey Precision Technologies, Inc. is a high-tech Manufacturer located in Mountainside, New Jersey. We specialize in electrical discharge machining (EDM) and precision manufacturing of all mechanical components for the aerospace and medical device industries as well as tooling for the plastics industry and stamping industry. Our modern facility is fully climate controlled and utilizes more than 60 EDM and CNC machines. Our EDM & CNC departments are running 24 hours per day, 7 days per week. Our CNC Lathe, CNC Mill, Sinker EDM, Wire EDM & Small Hole Drilling EDM machines are state-of-the-art and the latest generation available. Our CNC Technicians and Electrical Discharge Machining technicians perform CNC Programming, CAD, Automated Set-ups and efficient production & prototype operations. NJPT believes in continual improvement programs including continual employee training programs. In addition to off sight custom training, in-house training and other learning methods, NJPT offers a complete tuition reimbursement program from those FULL-TIME individuals who may want to earn or complete a college degree. The NJPT FULL-TIME benefits package is outstanding with matching 401K retirment plan, profit sharing, Medical plan, Prescription plan, Dental & Optical plans, Credit Union, etc. NJPT is a US Department of Defense contractor and controlled by ITAR (International Traffic in Arms) government regulations to only hire citizens of the United States or those individuals with a US permanent resident green card. An equal opportunity employer, NJPT is committed to its employees and employee satisfaction. NJPT is a great place to work and a great place to grow. \r\nPlease visit our Website: www.njpt.com

Job Description Industrial Designer Elizabeth, NJ | Full-time Responsibilities: Develop and refine designs for truck accessories (bumpers, visors, custom panels, etc.). Create accurate 2D drawings and 3D models (AutoCAD, Inventor, or similar). Prepare DXF files for laser cutting and ensure designs meet production requirements. Collaborate with the fabrication team to ensure feasibility and accuracy. Assist in prototyping, testing, and adjusting designs as needed. Maintain organized design files, drawings, and part numbers. Stay updated with trends in truck design and customization. Requirements: Bachelor’s degree in Industrial Design, Mechanical Design, or related field (or equivalent experience). Proficiency with CAD software (Autodesk Inventor, AutoCAD, or SolidWorks). Strong understanding of manufacturing processes (laser cutting, welding, bending, etc.). Creativity with an eye for detail and aesthetics. Ability to manage multiple projects and meet deadlines. Experience in the automotive/trucking industry is a strong plus. Spanish is a requirement Company DescriptionAbout Us Tony’s Custom Shop is a fast-growing truck accessory and fabrication company specializing in stainless steel bumpers, visors, and custom parts for heavy-duty trucks. We are seeking a creative and detail-oriented Industrial Designer to join our team. This role is ideal for someone with strong technical skills and a passion for transforming concepts into manufacturable designs.About Us\r\nTony’s Custom Shop is a fast-growing truck accessory and fabrication company specializing in stainless steel bumpers, visors, and custom parts for heavy-duty trucks. We are seeking a creative and detail-oriented Industrial Designer to join our team. This role is ideal for someone with strong technical skills and a passion for transforming concepts into manufacturable designs.

Job Description POSITION: Senior Project Engineer REPORTS TO: Project Engineering Manager OBJECTIVE: Be a valuable member of Verrex and its Engineering Services Department in the overall Implementation of Verrex’s Mission, Vision and Strategy, enabling Verrex to continue to grow and expand its business. COMPENSATION: Salary, exempt (non-hourly), monthly cell phone stipend. BENEFITS: Verrex offers a comprehensive benefits package to support the health, well-being, and financial security of our employees. Benefits include: • Medical, dental, and vision insurance (VSP), • Company-sponsored 401(k) plan with matching contributions, • Company-paid life insurance and AD&D coverage ($50,000), • Long-term disability (LTD) insurance, • Optional supplemental life insurance available for purchase, • Healthcare and Dependent Care Flexible Spending Accounts (FSAs), • Access to AFLAC supplemental insurance products This benefits summary is intended as a general overview and is subject to the terms and conditions of the official plan documents. RESPONSIBILITIES: • Work as the sole Engineer projects in maintaining and executing major project milestones, including:, • Review materials provided by Sales, including proposal, system description, BOM (bill of material), and other documentation, • Prepare sketches for the creation of facility and electrical drawing packages and wiring drawings., • The CAD department primarily works on drawings, but the engineer is required to have a working knowledge of AutoCAD and is expected to create and edit drawings., • Confirm final selection of equipment based on information provided by sales, client, and/or consultant to ensure expected system functionality, • Generate the job control for Purchasing based on the confirmed and agreed upon BOM, • Determination of bulk cable and connectors, and creation of cable pull schedule, • Creation of audio DSP files (Biamp, Q-SYS, and others), • Creation of Theory of Operation document to define specific system functionality, • Coordinate system functionality with the Programming team, • Shop QA review of systems, • Onsite system testing and commissioning, • Review markups of drawings and work with CAD to create as-built drawing sets, • Attend kick-off meetings and site coordination meetings both online and onsite, • Adhere to project schedules created by Project Managers, • Work closely with and provide support to other members of the internal project team (sales, other engineers, project managers, fabricators, QA, field technicians, programmers, and purchasing), • Coordination with architects, general contractors, and electrical contractors to preemptively avoid issues, ensuring site infrastructure and furniture will accommodate AV systems General Responsibilities: • Be a technical resource for other departments as required, • Be a mentor for Project Engineers, • Help drive the evolution of processes within the Engineering Department, • Be an engineering representative in reviewing Verrex processes with other departments, • Leverage field commissioning as a training opportunity for others internal to the company, • Be a liaison to the Design Engineers, providing feedback both positive and negative to help improve the Sales design process, • Conduct equipment research and testing on new and existing technology, • Proactively seek and review new industry products, providing written feedback and recommendations, • Interface with manufacturers when dealing with equipment problems, • Conduct site surveys, • Attend weekly resource meetings and monthly department meetings, • Attend manufacturer and industry training in-house, off premises, and online, • Provide peer review of drawings This job description may be revised at any given time by Verrex Management. Employee Handbook Please refer to the Verrex Employee Handbook for company policies on such issues as employment wages, salary, benefits, services, reimbursable expenses, employee communications, safety, health, standards of conduct, and corrective action. Equal Opportunity Employer Statement Verrex is proud to be an equal opportunity employer. We are committed to creating an inclusive, respectful workplace where everyone can thrive.

Job DescriptionAt ANS, we’re not just a consulting engineering firm, we’re a team of trailblazers shaping the future of civil, structural, and geotechnical engineering. Recognized as one of the Best Places to Work and Top 10 Hottest Engineering Firms in the US by Zweig Reports and featured in Inc. 5000’s Top 250 for our staggering 1,748% growth, we’re proud of what we’ve built and where we’re headed. We’re allergic to bureaucracy, thrive on innovation, and embrace data-driven decisions. If you love collaboration, creativity, and a fast-paced environment, we might just be your perfect match! WHY YOU’LL LOVE WORKING HERE- A supportive, dynamic, and innovative team culture.- Opportunities to attend industry events and showcase your skills.- A chance to directly shape the voice and vision of one of the industry’s fastest-growing firms. As a Designer II - Civil, you will join our growing civil engineering team and contribute to a variety of civil design projects. The ideal candidate will work with moderate supervision to develop high-quality construction plans and technical exhibits using Civil 3D. This role involves applying civil design principles, coordinating with engineers and other disciplines, and supporting project execution from concept through final deliverables. You will be expected to take ownership of assigned design tasks, solve routine design challenges independently, and continue developing technical expertise across grading, drainage, stormwater, and site development projects. Job Responsibilities: • Utilize AutoCAD Civil 3D to produce engineered construction plans and sheet setups, including plan views, profiles, grading plans, drainage layouts, and construction details., • Apply civil design principles to support site grading, drainage design, erosion and sediment control, and stormwater management solutions for renewable energy projects., • Work closely with civil engineers to interpret design intent and translate it into accurate CAD drawings., • Coordinate with electrical and structural teams to support multidisciplinary project execution., • Apply internal and client drafting standards while maintaining quality control across project deliverables., • Evaluate routine design alternatives for constructability, code compliance, and site challenges., • Support project teams in meeting deadlines and delivering high-quality work with increasing independence., • Help improve CAD workflows, templates, and drafting consistency across projects.Position Requirements:, • An associate or technical degree in CAD, civil engineering technology, or a related field is required., • Two to four years of experience in civil design with proficiency in AutoCAD Civil 3D., • Working knowledge of civil design principles including grading, drainage, and stormwater management., • RENEWABLES experience, specifically solar design, is preferred., • Ability to work independently on assigned tasks while collaborating effectively with engineers and project teams., • Strong attention to detail, problem-solving ability, and commitment to quality., • Willingness to continue growing technical knowledge and project responsibility.Benefits:, • 401(k) + company match, • Health, dental, and vision insurance, • Life insurance, • Unlimited PTO, • Professional development assistance, • Bonus opportunities, • Supportive, growth-oriented team environment Ready to join us? If you’re passionate about clean energy design, precision engineering, and turning data into impact, we want to meet you! Join us in shaping the next generation of solar and battery storage projects—and help transform ANS into the name everyone in renewables knows. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionShift: Pay Range: $85k-$100k Equipment:CIMEX CAD software Job Description • We are seeking an experienced Cimex CAD Programmer to design and program flat steel rule dies and related tooling components. This role is responsible for processing customer-supplied files and converting them into accurate CAD files ready for manufacturing., • The ideal candidate will possess strong knowledge of die-making processes and converting operations, with the ability to ensure precision, efficiency, and production readiness. Key Responsibilities • Program and design flat steel rule dies using Cimex CAD software, • Process customer-supplied artwork and convert files into production-ready CAD formats, • Create CAD files for:, • Phenolic counters, • Steel counter plates, • Male and female stripping tools, • Upper and lower blanking tools, • Spot sheets and mylars, • Generate CNC-ready files for routers, lasers, rule processors, and milling equipment, • Interpret customer artwork, structural drawings, and production specifications, • Apply correct rule heights, crease profiles, tolerances, and material allowances, • Optimize nesting layouts and material utilization, • Troubleshoot programming and production issues with toolmakers and press operators, • Maintain organized digital archives and proper revision control Required Qualifications • 3+ years of experience programming steel rule dies and related tooling, • Proficiency with CIMEX CAD software, • Strong understanding of:, • Steel rule die manufacturing processes, • Die cutting and converting operations, • Counter plate design and stripping tool configuration, • Ability to read and interpret structural drawings and dielines, • Knowledge of rule types, rubber types, and material behavior Preferred Qualifications • Experience in folding carton, corrugated, label, or packaging industries, • Familiarity with laser cutting systems and rule bending equipment, • Understanding of make-ready reduction techniques, • Knowledge of press setup and die cutting performance optimization Skills & Competencies • High attention to detail and accuracy, • Strong mechanical aptitude, • Problem-solving mindset, • Ability to manage multiple projects and deadlines, • Effective communication with production and programming teams Compensation & Benefits • $85,000 – $100,000 per year (commensurate with experience), • 401(k) with company match, • Paid time off and holidays We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Engineering Document Specialist (Manufacturing) • Position Type: Direct Hire, • Location: Florham Park, NJ, • Salary: $70,000-$80,000/annually, • Experience: 2-4 years About the Role Are you a detail-oriented problem solver who thrives at the intersection of engineering and manufacturing? We are looking for an Engineering Document Specialist to be the crucial bridge between our design teams and the production floor. In this role, you will own the integrity of our technical data, streamline our workflows, and ensure our manufacturing processes run without a hitch. What You Will Do • Document Lifecycle: Lead document control operations across engineering projects, ensuring strict regulatory compliance and accessibility., • System Administration: Administer Electronic Document Management Systems (EDMS) to continuously improve workflow efficiency., • Compliance & Audits: Support both internal and external audits by preparing documentation and maintaining rigorous compliance processes., • Process Improvement: Develop, update, and enforce Standard Operating Procedures (SOPs) across various departments., • Data Integrity: Control document issuance, revisions, and distribution while recording and maintaining precise data in SharePoint and advanced Excel spreadsheets. What You Bring to the Table • Proven experience supporting engineering or GMP (Good Manufacturing Practice) environments., • Proficiency in utilizing and administering EDMS systems, SharePoint, and document control tools (e.g., Bluebeam Revu, Procore)., • Hands-on experience with major ERP Systems such as SAP, Oracle, or D365., • Strong expertise in SOP development, version control, and audit support., • Exceptional organizational skills, high attention to detail, and an advanced proficiency in Microsoft Excel., • Bonus: Exposure to SolidWorks (Electrical/Routing) and a willingness to learn basic CAD library management. Why Join Us? We believe in rewarding the people who keep our operations running smoothly. We offer a comprehensive total rewards package designed to support your health, financial future, and work-life balance: • Top-Tier Healthcare: Comprehensive Medical, Dental, and Vision insurance plans with competitive premium coverage., • Retirement Planning: A 401(k) plan with company match to help you build your financial future., • Time to Recharge: Generous Paid Time Off (PTO) right out of the gate, plus paid company holidays., • Health & Wellness: Health Savings Account (HSA) and Flexible Spending Account (FSA) options., • Career Growth: Professional development support and training opportunities to expand your technical systems expertise.Company DescriptionPrideStaff is a national staffing service founded in 1978 with over 80 locations nationwide. We are currently expanding with a new office in East Hanover and are looking for individuals to share our mission: Consistently provide client experiences focused on what they value most. Professionals who are client service driven, goal orientated, organized and have an internal drive for success possess the qualities to be successful with PrideStaff. Additionally: -\tClients and candidates consistently rate PrideStaff among the top recruiting firms within the staffing industry based on Net Promoter Score (NPS) data -\tPrideStaff provides comprehensive training to Staffing Consultants on our proven sales, recruiting and staffing processes -\tWe help our Staffing Consultants succeed with leading edge recruiting technology and performance improvement programs -\tWe offer one of the most unique and competitive compensation plans in the Staffing and Recruiting industryPrideStaff is a national staffing service founded in 1978 with over 80 locations nationwide. We are currently expanding with a new office in East Hanover and are looking for individuals to share our mission: Consistently provide client experiences focused on what they value most. Professionals who are client service driven, goal orientated, organized and have an internal drive for success possess the qualities to be successful with PrideStaff. Additionally:\r\n\r\n•\tClients and candidates consistently rate PrideStaff among the top recruiting firms within the staffing industry based on Net Promoter Score (NPS) data\r\n•\tPrideStaff provides comprehensive training to Staffing Consultants on our proven sales, recruiting and staffing processes\r\n•\tWe help our Staffing Consultants succeed with leading edge recruiting technology and performance improvement programs\r\n•\tWe offer one of the most unique and competitive compensation plans in the Staffing and Recruiting industry

Job DescriptionAt ANS, we’re not just a consulting engineering firm, we’re a team of trailblazers shaping the future of civil, structural, and geotechnical engineering. Recognized as one of the Best Places to Work and Top 10 Hottest Engineering Firms in the US by Zweig Reports and featured in Inc. 5000’s Top 250 for our staggering 1,748% growth, we’re proud of what we’ve built and where we’re headed. We’re allergic to bureaucracy, thrive on innovation, and embrace data-driven decisions. If you love collaboration, creativity, and a fast-paced environment, we might just be your perfect match! WHY YOU’LL LOVE WORKING HERE- A supportive, dynamic, and innovative team culture.- Opportunities to attend industry events and showcase your skills.- A chance to directly shape the voice and vision of one of the industry’s fastest-growing firms. As a Designer III - Civil , you will join our growing civil engineering team and contribute to a wide range of projects. The ideal candidate will work under minimal supervision, applying advanced CAD skills to produce high-quality construction plans and exhibits. This role involves collaborating with engineers and other disciplines, mentoring junior staff, and helping maintain CAD standards. You will play a key role in solving design challenges and ensuring compliance with project requirements.Job Responsibilities: • Utilize Civil 3D to produce engineered construction plans and sheet setups, including plan views, sections, elevations, and details., • Apply concepts for site grading, storm drainage, erosion and sediment control, and stormwater best management practices., • Work closely with civil engineers to interpret design intent and translate it into accurate CAD drawings., • Coordinate with other disciplines such as survey, electrical, geotechnical, and structural engineering to ensure design integration., • Evaluate design alternatives for constructability, code compliance, and site challenges., • Coach and mentor junior designers while assisting in developing and maintaining CAD standards and templates.Position Requirements:, • An associate or technical degree in CAD, civil engineering technology, or a related field is required., • Four to eight years of experience in civil design, with strong proficiency in Civil 3D., • Solid understanding of civil design principles, including grading, drainage, and stormwater management., • Ability to work independently with minimal supervision and collaborate effectively across disciplines., • Strong problem-solving skills and attention to detail.Benefits:, • 401(k) + company match, • Health, dental, and vision insurance, • Life insurance, • Unlimited PTO, • Professional development assistance, • Bonus opportunities, • Supportive, growth-oriented team environment Ready to join us? If you’re passionate about clean energy design, precision engineering, and turning data into impact, we want to meet you! Join us in shaping the next generation of solar and battery storage projects—and help transform ANS into the name everyone in renewables knows. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionDescription: • Analyze production drawings, CAD models, and work orders to develop, test , and optimize CNC programs, ensuring accurate dimensions and efficient production cycles., • Utilize CAD/CAM software (AutoCAD, Rhino, Alphacam & CAM software) to translate designs into machine-readable code., • Determine, select, and manage appropriate cutting tools, speeds and feed rates for wood components., • Simplify machining time to enhance productivity and efficiency., • Support the shop with technical questions and troubleshooting., • Perform other duties and responsibilities as directed by the Supervisor and the Production Manager.Requirements:, • Bachelor's degree or equivalent in Engineering or Computer Science, • Minimum 5 years’ experience as a CNC programmer in architectural millwork and casework., • 5 years' experience in AutoCad., • 5 years' experience in Rhino, • 5 years' experience in Alphacam or other CAM software, • Experience with Homag CNC machines is a plus., • Excellent organizational and time management skills, • Excellent oral and written communication, • Must be able to work overtime when needed, • Highly motivated with the ability to work with minimum supervision

Job DescriptionCompany Description Doka USA is proud to be Certified™ by Great Place to Work®! We are committed to fostering a supportive work environment where all of our team members can thrive. As one of the world’s leading companies for developing, manufacturing, and distributing formwork solutions for the construction sector, Doka employs more than 9,000 people in over 58 countries and is part of the family-owned Umdasch Group. We Make It Work. Job Description As a Senior Project Engineer at Doka USA, you will be responsible for overseeing the planning, execution, and management of formwork projects from conception to completion. Leveraging your expertise in structural engineering, project management, and leadership, you will collaborate with cross-functional teams to deliver high-quality formwork solutions that meet project objectives, adhere to safety standards, and exceed client expectations. This will be an in-person role based out of our Kenilworth, NJ branch and will report into our Engineering Manager. Responsibilities: • Lead the planning and execution of formwork projects, including scheduling, resource allocation, and budget management, to ensure timely and successful project delivery., • Conduct comprehensive site assessments and feasibility studies to determine project requirements, constraints, and risks., • Develop detailed project plans, schedules, and budgets, and monitor progress against key milestones and deliverables., • Coordinate with internal teams, subcontractors, and suppliers to procure materials, equipment, and resources required for project execution., • Provide technical expertise and guidance to project teams, resolving complex engineering challenges and ensuring compliance with design specifications and regulatory requirements., • Conduct regular site inspections and quality audits to assess workmanship, safety practices, and adherence to project plans and specifications., • Manage client communications, addressing inquiries, concerns, and change requests in a proactive and professional manner., • Prepare and review engineering drawings, calculations, and documentation, ensuring accuracy, completeness, and compliance with industry standards and regulations.Qualifications, • Bachelor's degree in Civil Engineering, Structural Engineering, or a related field., • Professional Engineer (PE) certification is required with the ability to stamp within the state of Texas., • Proven experience in project engineering and management within the construction industry, with a focus on formwork-related projects., • Strong knowledge of structural engineering principles, construction methodologies, and building codes., • Proficiency in project management software, CAD software, and other relevant tools., • Excellent leadership, communication, and interpersonal skills, with the ability to collaborate effectively with diverse stakeholders., • Strong problem-solving and decision-making abilities, with a focus on delivering innovative and cost-effective solutions., • Prior experience in formwork design, scaffolding, or related fields is preferred. Additional Information Doka offers terrific career opportunities, competitive compensation, comprehensive benefits including medical, dental, vision, Flexible Spending Account, company paid life insurance, supplemental voluntary term life insurance, 401k retirement plan (Roth and Non-Roth), short-term disability, AFLAC policies, paid time off (sick/personal, vacation, floating holiday and company paid holidays) and an exciting opportunity to join as a member of Doka's team. If working with some of the most impressive construction projects in the US and joining an industry leader excites you, please submit your resume by clicking below. Visit us on-line at www.dokausa.com for additional information on Doka USA, Ltd. Doka USA, Ltd. is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. In accordance with applicable state and local pay transparency laws, Doka USA Ltd. is committed to providing a clear and equitable compensation structure. The salary range for this position is $85,000 – $95,000 annually, which is based on a variety of factors, including but not limited to, the candidate’s experience, qualifications, skills, and geographic location. This range represents the base pay for the position and does not include potential bonuses, commissions, benefits, or other forms of compensation. Final compensation will be determined at the time of offer and in accordance with internal equity and market data If you are interested and have a strong competitive drive, positive attitude, a desire to learn and grow from your experiences, then this is your opportunity to make an immediate difference. Please submit your resume and apply now. External candidates must be authorized to work for any employer in the USA.

Job Description Hazen and Sawyer is seeking an HVAC Engineer for our Iselin, NJ office. As part of our HVAC/Plumbing team the selected candidate can expect to work closely with more experienced HVAC Engineers to perform HVAC and Plumbing designs for some of the nation's most challenging and rewarding projects. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,000 employees in 70+ offices throughout the United States, Latin America, Canada, and the UK., • A flexible hybrid work schedule supports today's busy professionals.Key Responsibilities: This role focuses on municipal water and wastewater projects including planning, preliminary and final designs, and providing engineering services for projects in construction. The candidate should enjoy working within a team environment, and seek to develop HVAC and Plumbing design skills. Required Qualifications: • Bachelors of Science degree in Mechanical Engineering (preferred)., • Ability to communicate well both orally and in writing., • A minimum of (3) years of experience performing heating, ventilating, cooling, and plumbing design for municipal, commercial or industrial facilities., • A PE license is preferred, or the candidate must have plans of obtaining their PE., • Experience with Revit and other CAD skills is preferred., • Relevant areas of experience includes:, • Application of various types of heating, ventilation, air conditioning, and hydronic piping systems, • Heating and cooling load calculations, • HVAC controls systems and building/facility management systems, • ASME B31.1 Power Piping or ASME B3.9 Building Services Piping designs, • International Mechanical Code, Plumbing Code and Fire Code, • Performance of detailed HVAC and hydraulic pressure drop calculations, • Performance of Plumbing pipe sizing and fixture count analysis, • SMANCA Duct Construction Standards, • NFPA 820 HVAC designs, • Hot water boiler and chilled water system design, • Must be Authorized to work in the US Preferred Qualifications: It is preferable to have experience in the HVAC systems related to water and wastewater facilities, although relevant experience in municipal, industrial or commercial buildings and facilities is acceptable. What We Offer: • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location

Job Description Hazen and Sawyer is seeking a CAD/BIM Designer to join Hazen’s HVAC/Plumbing group. The candidate will work with project lead engineers to produce BIM (Revit) models, families, and contract drawings for the HVAC/Plumbing discipline. The ideal candidate is a team player and self-starter with exceptional organizational skills and has the ability to work independently, as well as in a team environment. The candidate must be detail oriented and have good communication and interpersonal skills. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,000 employees in 80+ offices throughout the United States, Latin America, Canada, and the UK. Key Responsibilities: • Preparing plan, section, isometric, and detail drawings for various HVAC/Plumbing systems., • Coordinating with the other disciplines (Structural, Architectural, Process Mechanical, Electrical, I&C, Site Civil) regarding the HVAC/Plumbing design, • Performing BIM model clash detection., • Ensuring HVAC/Plumbing models meet Hazen design standards., • Ensuring compliance with the established Hazen and/or client CADBIM standards., • Providing input on CAD/BIM standards and workflows., • Using parametric elements within Revit, and basic parametric Revit family creation and manipulation. Required Qualifications: • Minimum 2 years’ experience using Revit., • Proven proficiency in Revit and knowledge in design drawing production., • Experience leading and coordinating drawing production for small to medium sized projects. What We Offer: • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location

Job DescriptionSummary:We are representing a well-established, multi-discipline civil engineering and surveying firm seeking a Senior Civil CAD Drafter with strong land development experience to support site development projects across the greater Central New Jersey region. This role is ideal for an experienced Civil 3D professional who enjoys detailed production work and wants to contribute to a steady pipeline of commercial, residential, and mixed-use developments.This position plays a key role in translating engineering concepts into high-quality construction documents, supporting Project Engineers and leadership across grading, utilities, and site layout design. The ideal candidate brings deep Civil 3D expertise, strong attention to detail, and a collaborative mindset within a fast-moving design environment.Key Responsibilities:Prepare detailed civil site plans for land development projects using AutoCAD Civil 3DDevelop grading, drainage, and erosion control plansProduce utility layouts including sanitary, storm, and water systemsCreate plan and profile sheets, cross sections, and construction detailsCoordinate drawings with survey, environmental, and engineering teamsApply municipal and agency CAD standards across multiple jurisdictionsImplement redlines and revisions with strong quality control awarenessSupport multiple active projects while maintaining production deadlinesQualifications:8–10 years of CAD drafting experience with a strong focus on land developmentAdvanced proficiency in AutoCAD Civil 3DDemonstrated experience producing grading, drainage, and utility plansStrong understanding of civil site development standards and workflowsAbility to manage multiple deadlines in a production-driven environmentHighly detail-oriented with strong organizational skillsComfortable collaborating with engineers and multidisciplinary teamsExperience working within municipal design standards preferredCompensation + Benefits:Competitive salary aligned with senior Civil 3D market rates ($75K–$95K typical range)Medical, dental, and vision coverage401(k) planPaid holidays and PTOLong-term stability within an established regional firmConsistent land development project pipeline

The dispatcher will utilize multiple phone lines, six computer screens and wall monitors containing information ranging from Computer Aided Dispatch (CAD) systems, billing systems, payment collection screens.

The dispatcher will utilize multiple phone lines, six computer screens and wall monitors containing information ranging from Computer Aided Dispatch(CAD) systems, telecommunications equipment, mapping software, vehicle tracking software, weather and traffic information to assure the safety of medica

Job DescriptionMatrix New World Engineering, a part of True Environmental and its partner firms, have united their strengths to establish the nation's premier environmental and engineering services consulting firm. This powerhouse organization offers an extensive range of services aimed at revolutionizing the built environment and preserving the natural one. Its diverse expertise encompasses environmental remediation, urban planning, engineering iconic coastal and marine structures, developing sustainable energy sources, and pioneering resource extraction methods. Explore further at www.MWNE.com and True-Environmental.com to discover the full scope of our capabilities. We are seeking a motivated and adaptable Junior Hybrid Survey Technician to join our growing team. This role offers a unique opportunity to gain comprehensive experience by splitting time between field operations and office-based data processing. The ideal candidate is a proactive learner who enjoys working outdoors but also possesses the technical aptitude to translate field data into precise digital models. This position serves as a critical link in our project lifecycle, ensuring data integrity from the ground to the final deliverable. The pay for this role will be $24/hr-$25/hr based on experience. Key Responsibilities Field Operations (approx. 50%) • Assist Senior Surveyors in performing boundary, topographic, and construction staking surveys., • Operate, transport, and maintain precision equipment., • Clear brush, drive stakes, and accurately document field notes and sketches., • Ensure all safety protocols are followed while working in various environments (construction sites, wooded areas, urban centers). Office & Data Processing (approx. 50%) • Download and organize raw data from field collectors., • Assist in the preparation of survey plats and base maps using AutoCAD, Civil 3D, or MicroStation., • Perform basic survey calculations and data verification., • Maintain digital project folders and assist in preparing deliverables for clients.Required Qualifications, • Education: High School Diploma or equivalent; coursework in Geomatics, Civil Engineering, or Geography is a plus., • Technical Skills: Basic proficiency in Microsoft Office (Excel/Word). Familiarity with CAD software is highly preferred but not required—we will train the right candidate., • Physical Capability: Ability to walk long distances over uneven terrain, carry up to 50 lbs of equipment, and work outdoors in all weather conditions., • Licensing: Must possess a valid Driver’s License and a clean driving record. Preferred Qualifications, • Attention to Detail: Precision is the core of our business; you must be meticulous in recording measurements and notes., • Communication: Strong verbal and written skills for coordinating with field crews and office engineers., • Work Ethic: Punctuality and a "team-first" attitude are essential., • Adaptability: Comfortable transitioning between a physical outdoor environment and a focused office setting.All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.

Job Description Under direct supervision of Civil Foreman, perform masonry tasks including building forms and pouring concrete pads for equipment placement, structural shelter foundations, tower foundations. What You Will Do: • Experience preferred with core drills for shelter entry and drilling/setting concrete anchors, • Civil construction, such as but not limited to; earth moving, equipment operation, retaining earth/water, concrete/asphalt, fencing, demolition, carpentry, roofing, and painting,, • Electrical experience and grounding (cad-weld) is a bonus, • Being able to read construction drawings is a bonus, • Ability to work independently and as a team making sound decisions on behalf of the company., • Willing to learn and grow, • Communicates needs, problems and questions to civil foreman, • Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. What You Will Need: • Medical and physical ability to perform duties of the position, • Ability to maintain a driver's license, with a driving record that is within guidelines of the Driver's Insurability Agreement, • Ability to communicate fluently with Team Members, Management Team and other employees, • Ability to learn from various instruction methods, as well as self-study, • Ability to read and understand general job-related documents, • Ability to climb and work at elevated heights (rooftops and ladders) Pay:22-25.00 Hr.

Our company's Audit and Assurance Services primary purpose is to provide value-added independent and risk-based audit and assurance services. Under the direction of the Client Audit Director ("CAD") and the Auditor-in-Charge ("AIC"), the Senior Specialist will:. Collaborate with the audit team in th

Job DescriptionSalary: 20-35/hr Job description GRA Design Studio is a mid-size architecture & engineer firm working across residential, retail (including well-known franchises and quick serve restaurants), and commercial environments. As a growing studio with multiple active project teams, we are seeking a highly mobile, detail-driven architectural professional to serve as thefirst point of contact for projects in the fieldand a key connector between clients, consultants, and our design studios. This role is ideal for someone who enjoys being out in the world rather than behind a desk, thrives on variety, and wants direct exposure to projects from their earliest stages. You will have the opportunity totravel frequently, represent the firm on-site, and touch projects across all studios, helping shape the foundation of design work from day one. You are often the first GRA team member a client sees on a project. In that sense, you are not just collecting data, but setting the tone for how a project begins. What Makes This Role Unique • Licensed in over 40 states, this role will grant the opportunity to explore the country while traveling for work, all expenses paid (flights, ability to collect airline points, hotels, car rentals, and up to $75 of food per day), • High level offield autonomy and travel, • Exposure todiverse project typologies spanning commercial and residential spaces, • Direct interaction with clients, brokers, and site stakeholders during the earliest stage of the project, • Hands-on use of advanced scanning Lidar technology, • Opportunity to obtain Part 107 Drone Operator license funded by the company, • A visible role as arepresentative of the firm in the field Key Responsibilities • Frequent travel via personal vehicle (with mileage reimbursement), rentals, and flights, • Serve as first field contact for new project site visits and surveys, • Communicate with clients, brokers, and landlords to coordinate scheduling and access, • Book and manage travel logistics and maintain accurate trip records, • Conduct on-site surveys to gather architectural and MEP data through the use of Matterport, Faro Scanners, and drone equipment, • Document existing conditions through field notes, sketches, and measurements, • Capture, organize, and process field data for studio integration, • Collaborate with studio teams across multiple projects and disciplines, • Prepare clear, detailed field reports and daily project updates, • Process pointcloud into technical drawings using Revit, • Maintain equipment and troubleshoot issues as needed Qualifications • Experience with or exposure to surveying techniques and field documentation, • Strong communication skills, both written and verbal, • Comfortable acting as a client-facing representative of the firm, • Valid drivers license and willingness to drive for extended periods, • Ability to travel frequently and be away from home when projects require, • Physically capable of fieldwork including walking, climbing, and standing for long durations in varying site conditions, • Strong organizational skills and sound judgment in the field, • Proficiency with computers and willingness to learn specialized survey tools, • Working knowledge of Revit/CAD preferred, • Architectural or design background preferred but not required Benefits: • Health, dental, & vision insurance, • Paid time off & Holidays, • Career growth opportunities & professional development assistance (Amber Books subscription, additional PTO for ARE prep & testing), • Retirement plan (401K with employer contribution), • Collaborative team dynamic, • Extracurricular activities (sports clubs, bowling leagues, etc) & company events, • Wellness activities and benefit offerings, • Flex scheduling, • Hybrid/Remote work environment, • Paid travel/mileage reimbursement, • Opportunity to learn new software(s) Compensation package: • Bonus opportunities Schedule: • Monday to Friday Education: • Bachelors in Architecture(Preferred) Experience: • Site Survey experience Work Location:In person/Remote/Travel

A local staffing agency is seeking an experienced Land Surveyor – Project Manager to oversee land surveying projects including boundary and topographic surveys.

Job DescriptionDescription: POSITION SUMMARY: This position supports the work of the Y, a leading nonprofit committed to strengthening community through youth development, healthy living and social responsibility. Provides direct supervision of a group of children in a seasonal day camp. The Camp Specialist shall design and deliver a program specialty in their designated area tailored to the skills and interests of each age group. They will work with other counselors to bring about quality programming in that specialty area. Activities should nurture creativity, cooperation, skill and self-esteem and support the potential of all youth in programs and facilitates peer-to-peer connections as part of the overall camp experience. ESSENTIAL FUNCTIONS: 1. Plan, setup and deliver a variety of activities within specialty area that are age specific and that keep children’s interests high. Sparks is a half-day camp which will require Specialists to design their camp around the offered subject., 2. Instruct Counselors on how to teach activities within specialty. Encourage activity planning and leadership for Counselors assigned to the activity., 3. Lead specialty activities with assistance from Counselors and help keep campers focused on the activity., 4. Control all supply inventory used in specialty. Assist Camp Director with ordering supplies. Keep supply storage area neat and organized., 5. Assist the Camp Director in carrying out general camp activities where needed., 6. Greet campers with a smile and treat them with enthusiasm., 7. Learn camper’s names. Respond to campers needs., 8. Encourage camper’s youth development progress. As a leader, set a good example for the children. Teach campers how to solve problems and maintain basic discipline and group control., 9. Ensure that all volunteers have a great experience to help our association increase volunteer participation., 10. Develop positive relationships with member families and learn why they come to our Y., 11. Help group maintain camp cleanliness., 12. Perform all responsibilities in an enthusiastic and committed manner., 13. Take the initiative to be actively participatory in all activities., 14. Act as needed when not leading a specialty program. Safety: 1. Must attend and complete all required trainings., 2. At all times, uphold camp safety standards. Maintain constant face counts. Will understand and practice risk management and disaster policies and procedures., 3. Help maintain group control and facilitate lunchtime activities., 4. Follow all YMCA, ACA, and NJ Licensing standards and procedures to ensure the safest and best quality camp and to help maintain ACA accreditation., 5. Secure and submit all accident reports, special plans, schedule changes, and evaluations to Camp Director when appropriate., 6. Report all immediate concerns to Camp Director or nearest supervisor., 7. Use two methods of discipline with campers to include redirection to appropriate activities and using positive reinforcement to commend good choices. Other Duties: 1. Always maintain a professional demeanor, as you are a representative of the YMCA., 2. Wear Camp T-shirt daily., 3. Maintain positive attitude, responsibility and self-motivation. Be punctual and reliable., 4. Create a positive and nurturing learning environment to instill youth development, healthy living, and social responsibility. YMCA COMPETENCIES (Leader): Mission Advancement: Accepts and demonstrates the Ys values. Demonstrates a desire to serve others and fulfill community needs. Recruits volunteers and builds effective, supportive working relationships with them. Supports fund-raising. Collaboration: Works effectively with people of different backgrounds, abilities, opinions, and perceptions. Builds rapport and relates well to others. Seeks first to understand the other person’s point of view, and remains calm in challenging situations. Listens for understanding and meaning; speaks and writes effectively. Takes initiative to assist in developing others. Operational Effectiveness: Makes sound judgments, and transfers learning from one situation to another. Embraces new approaches and discovers ideas to create a better member experience. Establishes goals, clarifies tasks, plans work and actively participates in meetings. Follows budgeting policies and procedures, and reports all financial irregularities immediately. Strives to meet or exceed goals and deliver a high-value experience for members. Personal Growth: Pursues self-development that enhances job performance. Demonstrates an openness to change, and seeks opportunities in the change process. Accurately assesses personal feelings, strengths and limitations and how they impact relationships. Has the functional and technical knowledge and skills required to perform well; uses best practices and demonstrates up-to-date knowledge and skills in technology. Requirements: QUALIFICATIONS: 1. High school student or equivalent., 2. Previous experience working with children preferably in a day camp or enrichment class setting., 3. Interest preferred in one or more of the following areas: Visual Arts, CAD, Coding, Robotics, Sculpture, Performing Arts, Chess, Academics, etc., 4. At least 18 years of age., 5. Previous experience with diverse populations preferred. WORK ENVIRONMENT & PHYSICAL DEMANDS: · The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. · Ability to plan, lead and participate in a range of activities in a variety of outdoor/indoor settings.

The ideal candidate will have a bachelor’s degree in engineering and at least 5 years of experience in maintaining CAD drawings for manufacturing environments.

The role requires 4-6 years of mechanical design experience and proficiency in CAD and CREO Parametric.

Qualifications Qualifications: Bachelor’s degree in civil engineering preferred In lieu of degree, associate’s degree and demonstrated experience in civil design and drafting 3 - 5 years of commercial & residential site design and permitting experience Demonstrated Proficiency in AutoCAD Civ

The ideal candidate should have strong knowledge of CAD tools, organizational skills, and the ability to support both technical and hands-on prototyping when needed.

Ideal candidates will possess a Bachelor's Degree in Mechanical Engineering, have 3-7 years of MEP experience, and proficiency in AutoCAD.

Your Day-to-Day Lead all aspects of CAD-driven plan preparation and production for civil and survey projects Maintain, refine, and expand internal CAD standards to improve accuracy and efficiency Develop and implement CAD software policies, procedures, and best practices Manage and update AutoCAD st

Are you an experienced engineering professional who thrives in regulated environments and enjoys driving projects from concept through completion? We are seeking a Project Manager to oversee energy efficiency initiatives within a major New Jersey utility program.This is a high-impact role supporting

Real-world expertise is turned into training data, evaluations, and feedback loops that improve how models perform.AI labs and enterprises use micro1 to train models and build reliable AI agents through advanced evaluations and reinforcement learning environments.Experts contribute directly to how A

We are looking for a Project Manager to oversee construction projects (commercial projects) in Union, NJ from early planning through final delivery.This role requires a detail-oriented individual who can coordinate budgets, schedules, contracts, and field execution while maintaining strong communica

Proficiency in AutoCAD, Revit, Microsoft Excel, Word, Teams and HVAC design software (e.

Our client is a well-established, growth-oriented commercial flooring contractor with a strong reputation for execution, professionalism, and long-term customer relationships.They partner with general contractors, developers, and end users on high-profile projects and are known for delivering qualit

In a world of possibilities, pursue one with endless opportunities.At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself.Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that

Proficiency in AutoCAD, Revit, Microsoft Excel, Word, Teams and HVAC design software (e.