Trabajos welder en Glendale, ArizonaCrear alertas

Job Description The Preventative Maintenance Technician will be part of a responsive team that helps to keep the distribution centers of some of our most valuable customers humming along. This position is available for the quality minded person that has the mechanical skill sets to maintain conveyor systems within industrial automation facilities located in Arizona. The position requires a person that can accommodate a flexible work schedule that may involve traveling several hours to a facility at 3 AM to address an emergency situation. The prime candidate will have worked with conveyor systems but we will train prospects that have experience with maintenance on other forms of industrial equipment. The candidate will also demonstrate his or her willingness to adhere to the safety requirements mandated by OSHA and company safety policy. Essential Duties and Responsibilities (but not limited to): • Conveyor maintenance including but not limited to greasing, cleaning, repairing and modifying industrial automation equipment., • Vacuum and blow out conveyor bed frames using a compressed air gun., • Wipe down motors, bearings, shafts and interior guards., • Align chains and tighten set screws on bearings and sprockets., • Check oil level in gearboxes., • Tighten mounting bolts on motors and bearings., • Inspect and clean pulleys., • Lubricate chains and adjust to correct tension., • Inspect and track belts., • Follow daily instructions from Service Manager or Field Supervisor to dispatch, maintain and repair equipment., • Safely use hand tools, power tools, welders, and equipment on a daily basis to accomplish tasks., • Follow instruction and work safely around high/low voltage circuits., • Use of conveyor belt lacer and cutting tool., • Use electrical testing instruments such as but not limited to volt meters and Programming terminals to test panel components., • Use of a “Smart Phone” or “Tablet” to send and receive emails., • Track and maintain company tools and material., • Maintain work area cleaning of field materials and tooling., • Follow Company Code of Conduct and Safety Policies at all times., • If capable:, • Weld using an “Arc” or “Mig” electric or gas welder., • Operate Fork Lift’s, Scissor lifts, Boom Lifts, and other heavy equipment as required., • Fulltime 40HR+ work week position., • Ability to work overtime and weekends as required., • Regular attendance and punctuality to assigned schedule., • Ability to travel for several days at a time in rotation., • Ability to work early mornings if needed., • Valid driver’s license, • Must be able to receive and respond to after hour’s service calls when assigned to ASE call list. This may involve traveling several hours to facilities in the early morning., • Be able to travel locally as required to perform work duties., • Ability to perform tasks wearing required PPE., • Ability to work well both as a team player and on individual tasks., • Ability to use Power tools such as but not limited to a grinder, sawzall, band saw, drill, impact, skill saw, hammer drill, etc., • Ability to use a “Smart Phone” or “Tablet” to send and receive emails., • High school diploma or educational equivalent. Technical schooling preferred., • Experience working with conveyor systems or other industrial applications., • Previous electrical and/or mechanical knowledge a plus., • Clean driving record and the ability to drive company vehicles., • Pass background, drug screen and E-verify checks., • Experience working with conveyor systems or similar industrial machinery., • Ability to read and understand technical drawings., • Have a high regard and ownership for personal safety and the safety of others., • Knowledge of other construction trades a plus., • Organized and detail oriented., • Strong work ethic., • Self-starter, eager to learn and take on new tasks., • Conditions vary greatly depending on geographical location and can expose employee to cold or hot weather and humid or dry conditions., • Jobs are mostly indoors but can require outdoor work as well., • Ability to stand and work for up to twelve (12) hours in a workday., • Able to drive long distances to work and stay the night if necessary., • May be exposed to locations at elevation., • Tasks may cause you to work in awkward positions such as bending over frequently, working overhead, and working in tight spaces or on ladders., • Work around and near high/low voltage circuits., • Ability to stand for most if not all of the work day., • Ability to lift and move up to 50 lbs. in construction work environments., • Ability to work in loud industrial environment when required., • Ability to work in awkward positions, such us bending over frequently, working overhead, working in tight spaces or on ladders., • Ability to work in a fast paced environment, • Use of vibrating and jarring hand tools, power tools, welders, and heavy equipment on a regular basis., • Work performed can be part of a fast paced environment., • Competitive wages (based on experience level), • Paid Vacation and Sick Leave, • Medical and Dental health insurance, • 401(k) retirement plan, • Paid Travel Expenses Powered by JazzHR YHdHhPgNSU

Job Title: Welder Location: Glendale, AZ 85307 Duration: Direct hire Payrate: $28 - $37/hr. + $2.60 shift differential (DOE) Shift: 1st shift: Monday-Friday 7 am - 3 pm 2nd shift: Monday-Friday, 3 pm - 11 pm 3rd Shift - Sunday-Thursday, 11pm - 7 am WILL NEED TO TRAIN ON 2ND SHIFT FOR A FEW WEEKS - Monday-Friday, 3 pm – 11 pm Following established procedures, responsibilities may include some or all the following: • Properly set up and operate manual and automatic welding systems per work instructions and good welding practices., • Positions and adjusts fixtures, attachments, or workpiece on machine, using visual acuity, hand tools and measuring devices., • Adjust, within procedural limits, to fine-tune the process to achieve conformance standards., • Read and understand product and process drawings, procedures, weld symbols, and quality requirements., • Performs proper pre-weld cleaning and handling of parts., • Inspects hardware to ensure specifications are met, by visual inspection and measuring devices., • Maintain a high level of performance while following appropriate procedures and observing all pertinent safety rules and requirements., • Maintain work area and equipment in an organized, clean, and FOD-free manner., • Obtain and maintain all required qualifications and certifications in all appropriate metals., • Ability to perform set-up and troubleshooting of weld equipment., • Understand general and weld specific safety issues., • Provide guidance to less experienced welders as necessary., • Assist with skill development, safety, and other training of welders., • Work with Engineering as needed to develop weld processes and resolve weld issues., • Troubleshoot all weld equipment working in a team environment to maintain operational needs. Qualifications: • HS diploma or equivalent., • At least 8+ years of welding or related experience or demonstrated ability to perform the described responsibilities., • Able to become certified to AWS D17.1.2001., • Able to read and understand product and process drawings, procedures, weld symbols and quality requirements., • Must demonstrate manual dexterity., • Ability to perform basic mathematical calculations., • Must be able to read and understand blueprints., • Working knowledge of machine shop mathematics., • Must demonstrate effective English verbal, written and interpersonal communication skills., • Ability to work effectively with others and be a participative team player.

Job Description GTI Energy operates in a contract manufacturing and industrial manufacturing environment focused on fabrication, welding, and system integration of complex modular systems. Our high-mix, engineered-to-order production environment requires scalable processes, Lean Manufacturing, and Continuous Improvement to drive operational performance. Position Overview GTI Energy is seeking a Manufacturing Manager – Welding to lead welding operations across multiple production lines and shifts. The Manufacturing Manager will oversee Manufacturing Supervisors and Production Supervisors while driving performance across welding, fabrication, and robotic welding operations. This Manufacturing Manager role is responsible for scaling welding operations, improving throughput, maintaining quality, and ensuring on-time delivery in a contract manufacturing environment Key Responsibilities Manufacturing Operations & Welding Leadership • Lead welding operations as a Manufacturing Manager across multiple Manufacturing Supervisors and Production Supervisors, • Oversee manual welding, robotic welding, and fabrication processes across production lines, • Ensure production aligns with on-time delivery, on-time release, and throughput KPIs, • Drive Lean Manufacturing, Continuous Improvement, 5S, and Kaizen initiatives across welding operations, • Apply Six Sigma, Root Cause Analysis, 5 Whys, and Fishbone methodologies to eliminate defects and improve processes, • Improve weld quality, reduce rework, and increase throughput, • Own KPIs including throughput, inventory turns, weld quality, rework, safety, and on-time delivery, • Ensure ISO9001 compliance across welding and fabrication processes, • Lead and develop Welding Supervisors, Production Supervisors, and fabrication teams, • Build a high-performance culture within a contract manufacturing environment, • 7–12 years of experience as a Manufacturing Manager, Production Manager, or Welding Manager, • Experience in contract manufacturing or industrial manufacturing, • Strong background in welding, fabrication, and automated welding systems, • Engineering or fabrication background (mechanical or industrial), • Experience with robotic welding systems and automation • Certified welder or welding engineer preferred

Job Description Position Overview GTI Energy is seeking a Value Stream Supervisor to lead end-to-end production flow across a defined manufacturing value stream. The Value Stream Supervisor will own throughput, quality, and delivery across system integration and assembly operations within a contract manufacturing environment. This Value Stream Supervisor role is responsible for optimizing flow, eliminating waste, and driving Continuous Improvement across the production line. Key Responsibilities Value Stream Ownership • Own full value stream performance as a Value Stream Supervisor including throughput, quality, and delivery, • Lead system integration and assembly operations across mechanical and electrical builds, • Manage material flow, BOM execution, and production sequencing Lean Manufacturing & Process Optimization • Drive Lean Manufacturing initiatives including Kaizen, 5S, and Continuous Improvement, • Apply Six Sigma and structured problem solving including 5 Whys and Fishbone, • Lead Root Cause Analysis to eliminate recurring production issues KPI & Performance Management • Track and improve KPIs including on-time delivery, inventory turns, throughput, safety, and quality, • Ensure ISO9001 compliance across production processes, • Improve operational efficiency and reduce waste across the value stream Leadership & Development • Lead and develop teams within a contract manufacturing environment, • Promote accountability, safety, and operational discipline, • Support cross-functional alignment with Engineering, Quality, and Supply Chain Required Qualifications • 3–7 years of experience as a Value Stream Supervisor, Production Supervisor, or Manufacturing Supervisor, • Experience in contract manufacturing or industrial manufacturing, • Strong background in Lean Manufacturing and Continuous Improvement • Experience with system integration and assembly operations Preferred Qualifications • Engineering or fabrication background (industrial or mechanical), • Experience with welding robots, automation, or electrical assembly, • Certified welder or electrician preferred

Job Description Company Overview GTI Energy operates in a contract manufacturing and industrial manufacturing environment focused on fabrication, welding, assembly, electrical integration, and coating of complex modular systems. Our high-mix, engineered-to-order production environment requires disciplined execution, Lean Manufacturing, Continuous Improvement, and scalable operational leadership to support rapid growth and production demands across large-scale manufacturing facilities. Position Overview GTI Energy is seeking a Plant Manager – Manufacturing to lead full-site operations at our Goodyear, AZ facility. The Plant Manager will oversee Manufacturing Managers, Production Managers, Value Stream Managers, and Supervisors while driving performance across fabrication, welding, industrial assembly, electrical integration, and paint operations. This Plant Manager role is responsible for full operational execution, scaling production, and delivering against throughput, quality, safety, and on-time delivery in a contract manufacturing environment. This role owns a large-scale manufacturing P&L ($100M+) and requires strong financial leadership, operational discipline, and experience scaling manufacturing operations in industrial environments. The ideal candidate will bring a background in Industrial Engineering or Mechanical Engineering with deep experience across fabrication and system integration processes. Key Responsibilities Plant Leadership & Manufacturing Operations • Lead full-site manufacturing operations as a Plant Manager across fabrication, welding, industrial assembly, electrical integration, and paint, • Oversee Manufacturing Managers, Production Managers, Value Stream Managers, and Supervisors across all production functions, • Drive execution in a high-mix, engineered-to-order contract manufacturing environment, • Ensure alignment of production schedules, system integration activities, and Bill of Materials (BOM) execution across all departments, • Scale operations to support production growth, capacity expansion, and facility performance Lean Manufacturing & Continuous Improvement • Lead enterprise Lean Manufacturing initiatives including 5S, Kaizen, and Continuous Improvement programs across the plant, • Apply Six Sigma, Root Cause Analysis, 5 Whys, and Fishbone methodologies to eliminate defects and improve performance, • Drive plant-wide improvements in throughput, cycle time, and operational efficiency, • Standardize processes and scale best practices across fabrication, welding, assembly, electrical, and paint operations KPI Ownership & Operational Performance • Own plant-level KPIs including on-time delivery, on-time release, inventory turns, throughput, safety, and quality, • Drive ISO9001 compliance and ensure quality systems are embedded across all manufacturing functions, • Improve defect rates, reduce rework, and increase production stability, • Establish performance accountability across all levels of the organization Financial Ownership & P&L Management • Own and manage a large manufacturing P&L ($100M+), including cost control, labor efficiency, and operational spend, • Partner with Finance on budgeting, forecasting, and cost optimization strategies, • Drive margin improvement through operational efficiency, waste reduction, and process optimization, • Monitor cost drivers including labor, material utilization, and overhead Safety, Quality & Compliance • Lead plant-wide safety performance, ensuring compliance with OSHA standards and internal safety protocols, • Maintain a strong safety culture with measurable KPIs and continuous improvement initiatives, • Ensure compliance with ISO9001 and internal quality standards across all operations Cross-Functional Alignment • Partner with Engineering to resolve system integration challenges, fitment issues, and design improvements, • Collaborate with Supply Chain to ensure material availability, BOM accuracy, and inventory performance, • Work with Quality to enforce standards and drive corrective actions • Align with Program Management to support production schedules and delivery commitments Leadership & Organizational Development • Build and lead a high-performing manufacturing organization across all production functions, • Develop Manufacturing Managers, Production Managers, and Supervisors to drive operational excellence, • Establish leadership accountability and performance standards across the plant, • Support workforce development including technical training, certifications, and leadership growth Required Qualifications • 10–15+ years of experience in manufacturing leadership roles including Plant Manager, Operations Manager, or Manufacturing Manager, • Extensive experience managing large-scale manufacturing P&L ($100M+), • Experience in contract manufacturing and industrial manufacturing environments • Strong background across fabrication, welding, industrial assembly, electrical integration, and paint operations, • Proven experience leading Lean Manufacturing, Continuous Improvement, and Six Sigma initiatives, • Experience managing plant-level KPIs including throughput, inventory turns, on-time delivery, safety, and quality, • Strong operational and financial leadership experience in high-mix, engineered-to-order environments Preferred Qualifications • bachelor’s degree in industrial engineering, Mechanical Engineering, or related technical discipline, • Experience scaling manufacturing operations in high-growth environments, • Experience with automation, welding robots, or advanced manufacturing processes, • Certified welder or electrician a plus, • Experience with Six Sigma, Lean Manufacturing certifications, or structured problem-solving methodologies

Job Description Company Overview GTI Energy operates in a contract manufacturing and industrial manufacturing environment focused on fabrication, welding, and system integration of complex modular systems. Our high-mix, engineered-to-order production environment requires scalable processes, Lean Manufacturing, and Continuous Improvement to drive operational performance. Position Overview GTI Energy is seeking a Manufacturing Manager – Welding to lead welding operations across multiple production lines and shifts. The Manufacturing Manager will oversee Manufacturing Supervisors and Production Supervisors while driving performance across welding, fabrication, and robotic welding operations. This Manufacturing Manager role is responsible for scaling welding operations, improving throughput, maintaining quality, and ensuring on-time delivery in a contract manufacturing environment. Key Responsibilities Manufacturing Operations & Welding Leadership • Lead welding operations as a Manufacturing Manager across multiple Manufacturing Supervisors and Production Supervisors, • Oversee manual welding, robotic welding, and fabrication processes across production lines, • Ensure production aligns with on-time delivery, on-time release, and throughput KPIs, • Manage execution of fabrication schedules and BOM-driven production Lean Manufacturing & Continuous Improvement • Drive Lean Manufacturing, Continuous Improvement, 5S, and Kaizen initiatives across welding operations, • Apply Six Sigma, Root Cause Analysis, 5 Whys, and Fishbone methodologies to eliminate defects and improve processes, • Improve weld quality, reduce rework, and increase throughput, • Scale best practices across welding teams and automated welding environments KPI & Performance Management • Own KPIs including throughput, inventory turns, weld quality, rework, safety, and on-time delivery, • Ensure ISO9001 compliance across welding and fabrication processes, • Drive performance improvements across quality, efficiency, and cost Leadership & Organizational Development • Lead and develop Welding Supervisors, Production Supervisors, and fabrication teams, • Build a high-performance culture within a contract manufacturing environment, • Support workforce development including welding certifications and skill advancement Required Qualifications • 7–12 years of experience as a Manufacturing Manager, Production Manager, or Welding Manager, • Experience in contract manufacturing or industrial manufacturing, • Strong background in welding, fabrication, and automated welding systems, • Experience with Lean Manufacturing, Continuous Improvement, and Six Sigma Preferred Qualifications • Engineering or fabrication background (mechanical or industrial), • Experience with robotic welding systems and automation, • Certified welder or welding engineer preferred

Classification: Exempt Job Summary: The Chief Engineer (Branch) has overall responsibility for the daily repair and preventative maintenance of industrial textile processing equipment and facility maintenance. The Chief Engineer supervises the work of others and assists them in ensuring that tasks such as start-up and shut-down procedures, electrical troubleshooting, maintaining and operating boilers, welding and cutting, hydraulics, pneumatics, mechanical, or other systems are completed according to policies and procedures. This position reports to the Branch General Manager. About Us: We are Alsco Uniforms. We've been working hard for our customers since 1889 when we invented the uniform and linen rental industry. Alsco Uniforms has grown into a worldwide leader serving over 350,000 customers in 13 countries. It's our job every day to make every aspect of the customer experience better. Whatever our customers need, Alsco Uniforms finds the answers that work for them. Our employees are the heart and soul of Alsco Uniforms. As a result, we have a long history of strong financial performance, continuous improvement, and customer service. We're seeking driven professionals with an ambition to grow within our company. We'd love to talk to you about how you can fit into our team of diverse individuals and how your hard work will be rewarded with competitive pay and benefits and ongoing career development. Our full-time employees enjoy: • 401K Plan with Company Match, • Medical, Dental, Vision, FSA/HSA, • Life Insurance, Disability Insurance, • Vacation, Sick Time, Holidays, • Choice of Global Cash Card or Direct Deposit, • Career Advancement, • Learning & Development Opportunities Essential Functions • Maintains all operating equipment in satisfactory condition., • Supervises the plant engineering staff and consults with production, sales, and service personnel to ensure efficient plant operations., • Cost-effectively manages spare parts inventories., • Executes an effective preventative maintenance program to minimize unscheduled equipment downtime., • Installs, repairs, and performs preventative maintenance on industrial processing equipment, water levels, water systems, and other equipment and systems., • Troubleshoots electrical issues., • Diagnoses problems, replaces or repairs parts, tests, and adjusts., • Ensures work is performed safely and efficiently., • Develops, trains, maintains, and administers a department of qualified personnel required to maintain all equipment and facilities in a safe and efficient working condition., • Advise the General Manager of parts, supplies, and equipment requirements. Order such as needed while controlling expenses and inventories., • Supervise the handling of daily maintenance requests to minimize equipment downtime and continually improve operational processes., • Work with all plant personnel cooperatively and professionally., • Strictly adhere to all safety rules, policies, and procedures required by Alsco, law, and what is recognized as common practice in the industry., • Maintains technical knowledge by attending educational workshops, reviewing technical publications, and establishing personal networks. Remains current on equipment and repair procedures and best practices., • Studies blueprints and manufacturers' manuals to determine the correct operation of machinery., • Proficient in reading electrical schematics., • Develop and train engineering staff to keep them current on equipment, repair procedures, and best practices., • Keep accurate and timely records of maintenance performed., • Follow written and verbal instructions and perform other tasks as directed by supervision., • May work with and support other branch personnel as required by supervision., • Have and maintain a valid driver's license and driving record free of chargeable accidents, speeding, or other safety violations., • Minimum of 5-7 years of maintenance engineering experience with specific knowledge of machinery, electricity, electronics, plumbing, hydraulics, pneumatics, welder, and boiler applications., • Strong electrical troubleshooting ability of 3-phase 230-volt systems., • PLC programming experience., • Experience in carpentry, boiler repair, welding, and general facility repairs., • High school graduate or equivalency. Bachelor's degree preferred. For a general description of benefits that are being offered for this position, please visit alsco.com/benefits. Alsco Uniforms is an Equal Employment Opportunity Employer. Candidates are considered for employment with Alsco Uniforms without regard to their race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status (specifically status as a disabled veteran, recently separated veteran, armed forces service medal veteran, or active duty wartime or campaign badge veteran), or other classification protected by applicable federal, state, or local law. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor.

The typical work hours for our Millwright Combo Welder / Structural / ASME Welder vary based on the job. Millwright Combo Welder / Structural / ASME Welder. MMI Tank & Industrial Services of Phoenix, AZ is seeking to hire a full-time Millwright Combo Welder / Structural / ASME Welder to positively r

Midway Staffing - 506 E Western Ave - Responsibilities: Set up, modify, weld, and finish hollow metal doors and frames according to work orders; Operate electric and pneumatic tools, including cordless drills, die grinders, and grinders; Perform tack welding on thin sheet steel (12GA 18GA); Maintai

If you are a Welder and want to work alongside other proven Craftsmen who emphasize safety, productivity and superior workmanship, this is your chance to advance your career!.

Nesco Resource - - Responsibilities: Weld aerospace components to blueprints and specifications with precision and safety.

Nesco Resource - - Responsibilities: Perform welding of piping systems up to 48" Ø using SMAW and FCAW equipment; Prepare, cut, bevel, and assemble pipe components using CNC pipe cutters and tube benders; Read and interpret both structural and piping blueprints with accuracy.

The Welder IV plays a critical role in executing precision welding tasks by interpreting work orders and planning procedures, tools, and materials. By consistently adhering to safety protocols and maintaining reliable attendance, the Welder IV supports operational efficiency and contributes to a saf

Weinberger Disposal, a Waste Connections company, is looking to hire a Second Shift Welder in Phoenix, Arizona! Pay:$23. Our priority is to m Welder, Evening Shift, Manufacturing, Retail.

Location - Phoenix, AZ Work Arrangement - Onsite.We are a global leader in mining technology for a sustainable future.We help our customers extract the resources the world needs more efficiently and more sustainably.Our planet's future depends on the transition to renewable energy, and that transiti

Tradesmen International - - Responsibilities: MIG, TIG, Stick & Structural Welding; Air Arc; Repair Welding; Pipe & Mechanical; Flat/Vertical Carbon Steel.

If you are a welder and want to work alongside other proven craftsmen who emphasize safety, productivity, and superior workmanship, this is your chance to advance your career!.

Lead by example: set pace, uphold quality, mentor welders, and maintain a safe, sharp work environment.

We're looking for motivated welders - whether you're early in your career or bringing previous experience - to join our welding assembly line team.

TIG and MIG Welders for Small Fabrication Shop. We are currently seeking candidates for a welder fabricator as described below.

Experience Required: 5 years' recent experience in welding of complex sheet metal aerospace fabricated hardware.

Simple Application, Immediate Hire.All Experience Levels Encouraged to Apply.Full Time, Part Time & Seasonal Openings Available.

Growing Aerospace Company! State of the Art Facility! This Jobot Job is hosted by: Lincoln Sprague Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $17 - $22 per hour A bit about us: Based in Phoenix, AZ with facilities across the region we are a TOP Ranked Aerospace Components Manufacturer! Our core values are centered around our people and our clients. We believe that putting your employees first is not only the right thing to do, but it also gives us the competitive edge to ensure our clients have an excellent experience! Over the years our reputation for providing our people with the very best has caught the eye of some reputable clients who have chosen to use us as their primary firm! If you are an experienced Assembly Technician, then please apply! Why join us? Do you want to work with some of the nation’s best Clients AND enjoy time at home w/ family? We do too! • Meaningful Work!, • Best in Class Firm!, • Competitive Compensation Package!, • Complete Benefits Package!, • Flexible Work Schedules!, • Accelerated Career Growth!, • Fun Company Activities!, • Many More! Job Details Job Details: Are you passionate about assembling intricate electromechanical systems? Do you have a knack for soldering and wiring with precision? If so, we're looking for you! We are a dynamic and innovative manufacturing company seeking a skilled Electromechanical Assembler to join our team. This is a permanent, full-time position where you will play a critical role in the assembly and testing of our industry-leading products. Our ideal candidate is a detail-oriented team player with a strong background in electromechanical assembly and a commitment to quality and efficiency. Responsibilities: 1. Assemble, test, and calibrate complex electromechanical systems following detailed instructions and blueprints., 2. Utilize hand tools and soldering equipment to assemble components accurately and efficiently., 3. Perform soldering tasks in compliance with J-STD-001 Wiring/Soldering Certification standards., 4. Use a contact welder to assemble and repair components as required., 5. Conduct routine inspections to ensure all components meet our high-quality standards., 6. Prototype and test new designs, providing feedback and recommendations for improvements., 7. Troubleshoot and repair defective units returned by customers., 8. Maintain a clean and safe work environment, adhering to all safety protocols., 9. Collaborate with cross-functional teams to achieve production goals., 10. Lead and mentor junior team members, fostering an environment of continuous learning and improvement. Qualifications: 1. High school diploma or equivalent required. Technical or vocational training in electromechanical assembly or a related field is preferred., 2. A minimum of 2 years of experience in an electromechanical assembly role., 3. J-STD-001 Wiring/Soldering Certification or equivalent experience is required., 4. Demonstrated proficiency with hand tools and soldering equipment., 5. Experience with a contact welder is a plus., 6. Strong manual dexterity and attention to detail., 7. Proven ability to read and interpret technical drawings and blueprints., 8. Experience with calibration, prototyping, and testing of electromechanical systems., 9. Demonstrated leadership skills with the ability to mentor and guide junior team members., 10. Excellent problem-solving skills and the ability to troubleshoot complex electromechanical systems., 11. Strong communication and teamwork skills, with a commitment to maintaining a positive and productive work environment. This is a fantastic opportunity for a skilled Electromechanical Assembler to join our team and contribute to the production of industry-leading products. If you are a dedicated professional with a passion for precision and a knack for problem-solving, we want to hear from you. Apply today! Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job Description Job Title: Structural Welder Pay Rate: $25-$28/hour Schedule: Monday - Friday; 6:00 AM - 2:30 PM Location: Phoenix, AZ Madden Industrial Craftsmen, a premier staffing firm, is seeking a Structural Welder for a client in Phoenix, AZ. The client is a structural steel erection company offering services including structural steel fabrication, machinery and plant moving, trucking and rigging, and industrial piping. Responsibilities: * Operate welding equipment, forklifts, plasma programming, and other machinery. * Ensure the safe operation of equipment and maintain the yard area. * Assist in meeting production objectives. * Maintain shop tools and machinery. * Collaborate with the shop foreman to complete assigned work. * Perform additional tasks as assigned. Qualifications: * 3-5+ years of experience in MIG, FCAW, SMAW, and structural welding. * Current welding certification: AWS/Certified Weld Inspector preferred. * Working knowledge of welding methods, procedures, and quality control. * Strong technical background with hands-on experience in metal fabrication and welding using steel metals. * Ability to bend, stoop, reach, push, pull, climb, and carry objects with ease. * Ability to lift up to 75 pounds. #zr

Job DescriptionWho are we? At All Things Metal Industries, we don’t just build steel—we build people, relationships, and lasting careers. We’re proud to be a family-owned company that’s been recognized multiple times as one of Arizona’s Best Places to Work, and we take that seriously. Our culture is fast-paced and driven, but also supportive and humble. We value teammates who are hungry to learn, smart in how they work, and humble enough to grow with others. This isn’t a place for short-term gigs—you’ll find steady work, opportunities to advance, and a team that truly has your back. Whether it’s in the shop, the field, or the office, we believe in promoting from within, investing in our people, and helping each other reach the next level. If you’re looking for a long-term home where hard work meets big opportunity, All Things Metal is the place to be. KorFab KorFab provides quick-turn components and decorative metal panels. Our nimble team delivers quality and creativity for smaller, specialized projects while staying aligned with the core values and support of All Things Metal Industries. Role Overview As a KorFab Fabricator, your day will include a mix of welding and fabrication work, depending on the flow of projects. Some days you’ll be prepping and cleaning plate, reading tape measures, or running shop tools; other days you’ll be on the welder, laying down GMAW or dual shield welds, or helping assemble decorative panels and structural pieces. This role requires flexibility! You’ll shift between welding, fitting, operating equipment, and even shop upkeep to keep projects moving. We mention that KorFab is quick-turn, this means we emphasize speed, versatility, and quality. If you like variety, teamwork, and seeing projects through from raw steel to finished product, you’ll fit right in here. Key Responsibilities • Assist the KorFab team with daily fabrication duties, • Use a stud gun (training provided if needed), • Clean and prep metal plate for fabrication, • Prime and paint using a paint gun (training provided if needed), • Operate a press brake (preferred, but training available), • Perform basic welding (Flux core, Dual Shield, MIG), • Safely use basic shop tools (grinders, plasma torch, mag drill, chop saw, reciprocating saw, iron worker, band saw, time saver (automatic belt sander), • Follow safety, quality, and production standards, • Communicate effectively with team members and leadership, • Material handling (forklift training provided), • 1+ years of fabrication or welding experience, • Must be able to weld GMAW and Dual Shield, • Ability to read a tape measure, • Reliable transportation to arrive on time, • Ability to pass a background check and drug screen, • Ability to stand for most of the shift and work outdoors in the heat, • Ability to lift 50+ lbs, • Hungry, humble & smart, • Proactive and trustworthy, • Dependable and self-motivated, • Organized and detail-oriented, • Positive and team-oriented, • Able to work under pressure while staying effective, • A clear communicator Compensation & Benefits • $22+/hr, • Steady, long-term work in a supportive environment, • First-time homebuyer program with $500 bonus and optional realtor/mortgage support, • Dave Ramsey SmartDollar financial education resources, • Full benefits including medical, dental, vision, PTO, and sick time, • 401(k) with company match and profit-sharing contributions, • Family-friendly events and team-building activities, • Birthday and work anniversary recognition, • Cash bonuses for production roles and internal growth opportunities, • Drug Free Workplace Powered by JazzHR n5SlANf5OZ

Job Description About the Role: As a Fabricator within the utilities industry, you will play a critical role in constructing, assembling, and repairing metal structures and components essential for utility infrastructure. Your work will directly impact the reliability and safety of utility services by ensuring that fabricated parts meet precise specifications and quality standards. You will collaborate closely with engineers, project managers, and other tradespeople to interpret blueprints and technical drawings, transforming raw materials into finished products. This role demands a strong attention to detail and adherence to safety protocols to maintain a secure work environment. Ultimately, your craftsmanship and technical expertise will support the ongoing maintenance and development of vital utility systems across the United States. Minimum Qualifications: • High school diploma or equivalent., • Proven experience as a fabricator or metalworker in an industrial or utilities setting., • Proficiency in reading and interpreting technical drawings and blueprints., • Ability to operate fabrication tools and machinery safely and effectively., • Certification in welding (e.g., AWS Certified Welder) or related fabrication skills., • Experience working within the utilities industry or on infrastructure projects., • Familiarity with computer-aided design (CAD) software., • Basic knowledge of metallurgy and material properties., • Read and interpret blueprints, drawings, and specifications to determine fabrication requirements., • Cut, shape, and assemble metal components using various tools and machinery such as welding equipment, grinders, and saws., • Inspect and test fabricated parts to ensure they meet quality and safety standards., • Collaborate with engineering and maintenance teams to modify or repair existing structures as needed. The required skills such as blueprint reading and machine operation are essential for accurately fabricating components that meet project specifications and safety standards. Welding and metalworking skills enable the fabricator to join and shape materials effectively, ensuring structural integrity. Safety awareness is critical to prevent accidents and maintain compliance with industry regulations. Preferred skills like CAD familiarity enhance the ability to understand and sometimes modify designs digitally, improving efficiency and precision. Additionally, knowledge of metallurgy helps in selecting appropriate materials and techniques, contributing to the durability and performance of fabricated parts.

Job Description Job Title: Electromechanical Switch Assembler Company: Custom Control Sensors Location: Phoenix, AZ Employee Type: Full Time, Non-Exempt Industry: Manufacturing Education: High School Diploma or equivalent GED Experience: Six months or more of experience in a similar industry or some technical training Company Overview Custom Control Sensors, LLC (CCS) is a global leader of pressure, temperature, and liquid flow switches and sensors for the Aerospace, Defense, and Industrial markets. Since 1957, we have provided high-reliability electro-mechanical devices that utilize the "DUAL-SNAP" action disc spring principle we pioneered. We are AS 9100 and ISO 9001 certified. Industrial Product certifications include UL, CSA, ATEX, GOST, CCC and IECEx. We are growth-orientated, and dedicated to the continued cultivation of a vibrant, energetic work environment. Fostering interaction and collaboration between all associates, connection with our customers, and opportunity for creativity is our primary focus. Benefits • Medical, • Dental, • 401k with Match, • Employer funded Life Insurance and Long-term Disability, • Voluntary Short-term Disability, • Sick and Vacation Leave On a production basis, performs light electronic and/or electromechanical assembly work of low complexity and limited scope. Performs only relatively simple assembly procedures, which require primarily manual dexterity and the ability to work with simple hand tools. The cycle of repetition is ordinarily short with long work runs on the same or similar items. Parts are ordinarily not difficult to handle and soldering, if required, does not involve access problems. Works from samples or simple visual aids (clearly marked drawings or photographs, etc.) and receives detailed instructions as to exact procedures to be followed. Excludes those who are engaged primarily in loading and operating a machine, which assembles parts or components. Key Responsibilities: • Performs only relatively simple assembly procedures, • Performs operation of contact welder;, • Performs operation of orbital swager;, • Utilizes a variety of tools, gages and equipment;, • Keeps quality up to acceptable standards with little discrepant work;, • Performs tasks equal to or exceeding established standards;, • Accomplishes production quotas;, • Keeps work area clean and orderly;, • Ability to react to changes productively and perform other essential tasks as assigned; Skills and Requirements: • Due to need to maintain ITAR compliance, applicants must be U.S. citizen or legal permanent resident., • Performs light electronic and / or electromechanical assembly work of low complexity and scope;, • Operation of resistance soldering unit;, • Performs frequent spring linking as required;, • Adequate manual dexterity to safely and proficiently work with simple small hand tools;, • Ability to work from samples or simple visual aids;, • Ability to read, write, and follow written and verbal instruction in English;, • Ability to work well with only a modest amount of repeated instructions;, • Working consistently, working overtime, as required;, • Be team oriented and possess flexibility and adaptability. Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is continuously required to sit, use hands and fingers to flex and extend fingers with opposition of thumb-palmar grasp, talk or hear. The employee is frequently required to stand, walk, bend, stoop, reach, turn, twist, push, pull and to move within all areas of the facilities and parking lots. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision peripheral vision, color vision, depth perception and the ability to adjust and focus. EEO M/F/D/V Custom Control Sensors, LLC. is an Equal Opportunity employer. All qualified applicants for employment shall receive fair and equal treatment regardless of their race (including hair texture and protective hairstyles, such as braids, locks, and twists), color, religion, creed, sex/gender, marital or registered domestic partnership status, age, national origin or ancestry, citizenship, pregnancy, childbirth, breastfeeding or related medical conditions, mental or physical disability (including HIV and AIDS), medical condition including genetic information or characteristics (including those of family members), sexual orientation, veteran or military status, gender identity, gender expression, transgender status or any other basis protected by federal, state or local law, ordinance or regulation. The policy not to discriminate includes, but is not limited to, advertising for positions, recruiting, hiring, placement, promotion, transfer, rates of pay, discipline and termination. No recruiters or recruitment agencies.

Job Description Company Overview GTI Energy operates in a contract manufacturing environment focused on industrial manufacturing of complex modular systems. Our work includes system integration of mechanical, electrical, and structural components into fully assembled products. We operate in a high-mix, engineered-to-order production environment where Lean Manufacturing, Continuous Improvement, and operational discipline drive performance. Position Overview GTI Energy is seeking a Manufacturing Supervisor to lead production and assembly operations on 2nd shift. The Manufacturing Supervisor will oversee electro-mechanical assembly, system integration, and production execution in a fast-paced industrial manufacturing environment. This Manufacturing Supervisor role is responsible for driving throughput, quality, safety, and on-time delivery while leading teams in a contract manufacturing environment. Key Responsibilities Production Leadership & System Integration • Lead daily operations as a Manufacturing Supervisor overseeing mechanical assembly, electrical assembly, and system integration, • Supervise teams building complex assemblies using mechanical drawings, wiring diagrams, and Bill of Materials (BOM), • Ensure production aligns with on-time delivery and on-time release targets, • Drive Lean Manufacturing initiatives including 5S, Kaizen, and Continuous Improvement programs, • Apply Six Sigma principles and structured problem solving including 5 Whys and Fishbone analysis, • Lead Root Cause Analysis for production issues, defects, and downtime, • Ensure compliance with ISO9001 quality standards and internal quality systems, • Monitor KPIs including throughput, on-time delivery, inventory turns, and defect rates, • Enforce safety standards and track safety performance metrics, • Maintain high standards for in-process inspection and quality control, • Cross-Functional Execution, • Partner with Engineering to resolve production issues and system integration challenges, • Work with Supply Chain to ensure material availability and BOM accuracy, • 3–7 years of experience as a Manufacturing Supervisor, Production Supervisor, or Assembly Supervisor, • Experience in contract manufacturing or industrial manufacturing environments, • Strong background in electro-mechanical assembly and system integration, • Experience with Lean Manufacturing, Continuous Improvement, and Root Cause Analysis, • Background in fabrication, mechanical, or industrial engineering environments, • Experience with welding, welding robots, or mid-production automation, • Certified welder or electrician strongly preferred, • Experience with Six Sigma, 5S, Kaizen, and structured problem-solving methodologies

Job Description Value Stream Supervisor – Manufacturing & Assembly Position Overview GTI Energy is seeking a Value Stream Supervisor to lead end-to-end production flow across a defined manufacturing value stream. The Value Stream Supervisor will own throughput, quality, and delivery across system integration and assembly operations within a contract manufacturing environment. This Value Stream Supervisor role is responsible for optimizing flow, eliminating waste, and driving Continuous Improvement across the production line. Key Responsibilities Value Stream Ownership • Own full value stream performance as a Value Stream Supervisor including throughput, quality, and delivery, • Lead system integration and assembly operations across mechanical and electrical builds, • Manage material flow, BOM execution, and production sequencing Lean Manufacturing & Process Optimization • Drive Lean Manufacturing initiatives including Kaizen, 5S, and Continuous Improvement, • Apply Six Sigma and structured problem solving including 5 Whys and Fishbone, • Lead Root Cause Analysis to eliminate recurring production issues KPI & Performance Management • Track and improve KPIs including on-time delivery, inventory turns, throughput, safety, and quality, • Ensure ISO9001 compliance across production processes, • Improve operational efficiency and reduce waste across the value stream Leadership & Development • Lead and develop teams within a contract manufacturing environment, • Promote accountability, safety, and operational discipline, • Support cross-functional alignment with Engineering, Quality, and Supply Chain Required Qualifications • 3–7 years of experience as a Value Stream Supervisor, Production Supervisor, or Manufacturing Supervisor, • Experience in contract manufacturing or industrial manufacturing, • Strong background in Lean Manufacturing and Continuous Improvement • Experience with system integration and assembly operations Preferred Qualifications • Engineering or fabrication background (industrial or mechanical), • Experience with welding robots, automation, or electrical assembly

Job Description Company Overview GTI Energy operates in a contract manufacturing and industrial manufacturing environment focused on fabrication, welding, and system integration of complex modular systems. Our high-mix, engineered-to-order production model requires disciplined execution across Lean Manufacturing, Continuous Improvement, and value stream-driven operations. Position Overview The Value Stream Supervisor – Welding is responsible for leading a defined segment of the welding and fabrication value stream. This role ensures consistent production flow across manual and robotic welding operations while improving First Pass Yield (FPY), reducing rework, and driving performance against cycle time, takt time, and on-time delivery. The Value Stream Supervisor plays a critical role in managing flow, identifying constraints, and driving Continuous Improvement across welding operations in a contract manufacturing environment. Key Responsibilities Value Stream Flow & Welding Execution • Lead day-to-day welding operations across a defined value stream, including manual and robotic welding processes, • Manage WIP, identify bottlenecks, and balance workloads to maintain consistent throughput, • Ensure welding execution aligns with fabrication drawings, weld symbols, and Bill of Materials (BOM) requirements, • Maintain alignment with production schedules, on-time delivery, and downstream system integration needs Lean Manufacturing & Continuous Improvement • Drive Lean Manufacturing initiatives including 5S, Kaizen, and Continuous Improvement across welding operations, • Apply structured problem solving methods including Root Cause Analysis, 5 Whys, and Fishbone diagrams, • Improve cycle time and takt time through process optimization and waste reduction, • Identify constraints within fabrication and welding flow and implement corrective actions KPI Ownership & Performance Management • Monitor and improve key metrics including First Pass Yield (FPY), weld quality, throughput, cycle time, takt time, safety, and rework, • Drive reduction in weld defects and improve process consistency, • Ensure compliance with ISO9001 standards and internal quality systems, • Establish accountability for performance across the welding team Cross-Functional Alignment • Partner with Engineering to resolve weld design, fit-up, and fabrication issues impacting flow, • Work with Supply Chain to ensure material readiness and BOM accuracy, • Collaborate with Quality to address defects and implement corrective actions, • Coordinate with Production Planning to ensure flow aligns with production demand Leadership & Team Development • Lead and develop welders and fabrication technicians within the value stream, • Reinforce expectations around safety, quality, and operational discipline, • Build team capability in Lean Manufacturing and structured problem solving Required Qualifications • 3–7 years of experience in Welding Supervisor, Manufacturing Supervisor, or Value Stream Supervisor roles, • Experience in contract manufacturing or industrial manufacturing environments, • Strong background in welding processes including MIG, TIG, FCAW, and structural welding, • Experience with Lean Manufacturing, Continuous Improvement, and Root Cause Analysis Preferred Qualifications • Experience with robotic welding systems and automation • Certified welder (AWS or equivalent)

Job Description Manufacturing Supervisor – Assembly Job Description Company Overview GTI Energy operates in a contract manufacturing environment focused on industrial manufacturing of complex modular systems. Our work includes system integration of mechanical, electrical, and structural components into fully assembled products. We operate in a high-mix, engineered-to-order production environment where Lean Manufacturing, Continuous Improvement, and operational discipline drive performance. Position Overview GTI Energy is seeking a Manufacturing Supervisor to lead production and assembly operations on 2nd shift. The Manufacturing Supervisor will oversee electro-mechanical assembly, system integration, and production execution in a fast-paced industrial manufacturing environment. This Manufacturing Supervisor role is responsible for driving throughput, quality, safety, and on-time delivery while leading teams in a contract manufacturing environment. Key Responsibilities Production Leadership & System Integration • Lead daily operations as a Manufacturing Supervisor overseeing mechanical assembly, electrical assembly, and system integration, • Supervise teams building complex assemblies using mechanical drawings, wiring diagrams, and Bill of Materials (BOM), • Ensure production aligns with on-time delivery and on-time release targets, • Drive Lean Manufacturing initiatives including 5S, Kaizen, and Continuous Improvement programs, • Apply Six Sigma principles and structured problem solving including 5 Whys and Fishbone analysis, • Lead Root Cause Analysis for production issues, defects, and downtime, • Ensure compliance with ISO9001 quality standards and internal quality systems, • Monitor KPIs including throughput, on-time delivery, inventory turns, and defect rates, • Enforce safety standards and track safety performance metrics, • Maintain high standards for in-process inspection and quality control, • Cross-Functional Execution, • Partner with Engineering to resolve production issues and system integration challenges, • Work with Supply Chain to ensure material availability and BOM accuracy, • 3–7 years of experience as a Manufacturing Supervisor, Production Supervisor, or Assembly Supervisor, • Experience in contract manufacturing or industrial manufacturing environments, • Strong background in electro-mechanical assembly and system integration, • Experience with Lean Manufacturing, Continuous Improvement, and Root Cause Analysis, • Background in fabrication, mechanical, or industrial engineering environments, • Experience with welding, welding robots, or mid-production automation, • Certified welder or electrician strongly preferred, • Experience with Six Sigma, 5S, Kaizen, and structured problem-solving methodologiesCompany DescriptionGTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more.GTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more.

Job Description Job Posting Title Manufacturing/Production Manager - Welding/Fabrication Job Description GTI Energy operates in a contract manufacturing and industrial manufacturing environment focused on fabrication, welding, and system integration of complex modular systems. Our high-mix, engineered-to-order production environment requires scalable processes, Lean Manufacturing, and Continuous Improvement to drive operational performance. Position Overview GTI Energy is seeking a Manufacturing Manager – Welding to lead welding operations across multiple production lines and shifts. The Manufacturing Manager will oversee Manufacturing Supervisors and Production Supervisors while driving performance across welding, fabrication, and robotic welding operations. This Manufacturing Manager role is responsible for scaling welding operations, improving throughput, maintaining quality, and ensuring on-time delivery in a contract manufacturing environment Key Responsibilities Manufacturing Operations & Welding Leadership • Lead welding operations as a Manufacturing Manager across multiple Manufacturing Supervisors and Production Supervisors, • Oversee manual welding, robotic welding, and fabrication processes across production lines, • Ensure production aligns with on-time delivery, on-time release, and throughput KPIs, • Drive Lean Manufacturing, Continuous Improvement, 5S, and Kaizen initiatives across welding operations, • Apply Six Sigma, Root Cause Analysis, 5 Whys, and Fishbone methodologies to eliminate defects and improve processes, • Improve weld quality, reduce rework, and increase throughput, • Own KPIs including throughput, inventory turns, weld quality, rework, safety, and on-time delivery, • Ensure ISO9001 compliance across welding and fabrication processes, • Lead and develop Welding Supervisors, Production Supervisors, and fabrication teams, • Build a high-performance culture within a contract manufacturing environment, • 7–12 years of experience as a Manufacturing Manager, Production Manager, or Welding Manager, • Experience in contract manufacturing or industrial manufacturing, • Strong background in welding, fabrication, and automated welding systems, • Engineering or fabrication background (mechanical or industrial), • Experience with robotic welding systems and automation • Certified welder or welding engineer preferredCompany DescriptionGTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more.GTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more.

Job Description We are currently looking to hire an individual who has a great work ethic and is looking for long term employment. The right candidate is someone who supports our customers with a positive customer focused attitude. Our fabricators build all types of gates/fences. 2+ years Experience is a must,weld test will be given. Must be motivated, punctual, reliable, and a self starter. Fabricator must be 21+ with a clean driving record, experience in pulling a trailer as there could be times you will be sent to out to pick up or help install. Must have a great attitude with other employees. Maintain safe working environment. Compensation will be dependent on experience level. We work 4 10hr days from 5am-3:30pm Off Friday, and weekend. If you meet these requirements please send a resume and we will set up an interview. 401k and paid time off Company DescriptionWe are a small Fabrication & Automation Gate Company, with stable work and weekly pay.We are a small Fabrication & Automation Gate Company, with stable work and weekly pay.

Job Descriptionmachine operator / cage welder Essential Job Functions/Duties: • Must make safety a top priority, • Operate control station, • Ensure machine is clean and is in good working order, • Ensure quality of materials used in production (concrete, wire reinforcement), • Inspect wire cages / reinforcements, • Supply machine with necessary components to make product, • Meet production schedule numbers, • Produce quality product, • Be able to perform basic trouble shooting on production and concrete machinery, • Operate a forklift and or crane to supply machine, • Experience in machine operations, welding, maintenance, or Quality control preferred, • This role requires strong problem solving skills, attention to detail, and the ability to work under pressure

Job Description Job Title: Field Structural Welder - Temp-to-Hire Pay Rate: $24-$28/hour Schedule: Monday - Friday; 6:00 AM - 2:30 PM Location: Phoenix, AZ Madden Industrial Craftsmen, a premier staffing firm, is seeking a Shop Welder for a client in Phoenix, AZ. The client is a structural steel erection company offering services including structural steel fabrication, machinery and plant moving, trucking and rigging, and industrial piping. Responsibilities: • Operate welding equipment, forklifts, plasma programming, and other machinery., • Ensure the safe operation of equipment and maintain the yard area., • Assist in meeting production objectives., • Maintain shop tools and machinery., • Collaborate with the shop foreman to complete assigned work., • 5+ years of experience in MIG, FCAW, SMAW, Structural, • Current welding certification: AWS/Certified Weld Inspector preferred., • Working knowledge of welding methods, procedures, and quality control., • Strong technical background with hands-on experience in metal fabrication and welding using steel metals., • Ability to bend, stoop, reach, push, pull, climb, and carry objects with ease., • Ability to lift up to 75 pounds.

Job DescriptionOverview: A leading employee-owned construction company is seeking an experienced Field Foreman to supervise steel erection projects on-site. This role is critical to ensuring the safe, efficient, and high-quality completion of structural and miscellaneous steel installations. The position offers a hands-on leadership opportunity in a safety-focused and collaborative environment, with the chance to mentor and develop a skilled team of ironworkers. The Role: The Field Foreman will oversee daily field operations, including personnel, materials, tools, and equipment, ensuring projects are completed safely, on schedule, and to contract specifications. Success in this role means maintaining safety standards, delivering quality workmanship, and coordinating effectively with project managers, fabrication teams, and on-site personnel. Responsibilities: * Serve as OSHA Competent Person on job sites, enforcing safety procedures and standards. * Manage daily personnel, materials, and equipment, tracking time and productivity. * Interpret construction drawings and specifications to guide field operations. * Control the erection of steel structures to meet contract requirements and maintain stability. * Coordinate site layout and material deliveries with project managers and fabrication shop. * Conduct daily safety meetings and maintain accurate logs of safety and production activities. * Manage quality control for welding and bolting procedures in the field. * Conduct inspections of tools, equipment, and structural assemblies for safety and quality compliance. * Train, mentor, and develop ironworkers on safe and efficient work practices. * Communicate effectively with project managers, trades, and team members to ensure smooth operations. Requirements: * Minimum 5 years of experience in structural steel erection. * Strong blueprint reading and interpretation skills. * High school diploma or equivalent. * Certified welder (AWS D1.1 SMAW, Positions 1F–4F & 1G–4G, thickness 1/8”–1”). * Completed OSHA 10-Hour Program and Operation Safe Site – Subpart R training. * Certified operator of Reach Forklift, Boom, Scissor Lift, and Hilti Powder Actuated Equipment. * Certified Rigger. * Knowledgeable in AWS and AISC requirements. * Strong communication skills and ability to train others. * Excellent physical balance and practical judgment on-site. Nice to Have: * Experience in an employee-owned company environment. * Prior leadership of diverse structural steel projects. Salary: Competitive compensation based on experience. Location: On-site at project locations, Phoenix, AZ , United States of America. Benefits: * Employee ownership participation (ESOP) * Health and wellness benefits * Professional development opportunities * Collaborative and supportive company culture

Job Description Classification: Exempt Job Summary: The Chief Engineer (Branch) has overall responsibility for the daily repair and preventative maintenance of industrial textile processing equipment and facility maintenance. The Chief Engineer supervises the work of others and assists them in ensuring that tasks such as start-up and shut-down procedures, electrical troubleshooting, maintaining and operating boilers, welding and cutting, hydraulics, pneumatics, mechanical, or other systems are completed according to policies and procedures. This position reports to the Branch General Manager. About Us: We are Alsco Uniforms. We’ve been working hard for our customers since 1889 when we invented the uniform and linen rental industry. Alsco Uniforms has grown into a worldwide leader serving over 350,000 customers in 13 countries. It’s our job every day to make every aspect of the customer experience better. Whatever our customers need, Alsco Uniforms finds the answers that work for them. Our employees are the heart and soul of Alsco Uniforms. As a result, we have a long history of strong financial performance, continuous improvement, and customer service. We’re seeking driven professionals with an ambition to grow within our company. We’d love to talk to you about how you can fit into our team of diverse individuals and how your hard work will be rewarded with competitive pay and benefits and ongoing career development. Our full-time employees enjoy: • 401K Plan with Company Match, • Medical, Dental, Vision, FSA/HSA, • Life Insurance, Disability Insurance, • Vacation, Sick Time, Holidays, • Choice of Global Cash Card or Direct Deposit, • Career Advancement, • Learning & Development Opportunities Essential Functions • Maintains all operating equipment in satisfactory condition., • Supervises the plant engineering staff and consults with production, sales, and service personnel to ensure efficient plant operations., • Cost-effectively manages spare parts inventories., • Executes an effective preventative maintenance program to minimize unscheduled equipment downtime., • Installs, repairs, and performs preventative maintenance on industrial processing equipment, water levels, water systems, and other equipment and systems., • Troubleshoots electrical issues., • Diagnoses problems, replaces or repairs parts, tests, and adjusts., • Ensures work is performed safely and efficiently., • Develops, trains, maintains, and administers a department of qualified personnel required to maintain all equipment and facilities in a safe and efficient working condition., • Advise the General Manager of parts, supplies, and equipment requirements. Order such as needed while controlling expenses and inventories., • Supervise the handling of daily maintenance requests to minimize equipment downtime and continually improve operational processes., • Work with all plant personnel cooperatively and professionally., • Strictly adhere to all safety rules, policies, and procedures required by Alsco, law, and what is recognized as common practice in the industry., • Maintains technical knowledge by attending educational workshops, reviewing technical publications, and establishing personal networks. Remains current on equipment and repair procedures and best practices., • Studies blueprints and manufacturers’ manuals to determine the correct operation of machinery., • Proficient in reading electrical schematics., • Develop and train engineering staff to keep them current on equipment, repair procedures, and best practices., • Keep accurate and timely records of maintenance performed., • Follow written and verbal instructions and perform other tasks as directed by supervision., • May work with and support other branch personnel as required by supervision., • Have and maintain a valid driver’s license and driving record free of chargeable accidents, speeding, or other safety violations., • Minimum of 5-7 years of maintenance engineering experience with specific knowledge of machinery, electricity, electronics, plumbing, hydraulics, pneumatics, welder, and boiler applications., • Strong electrical troubleshooting ability of 3-phase 230-volt systems., • PLC programming experience., • Experience in carpentry, boiler repair, welding, and general facility repairs., • High school graduate or equivalency. Bachelor’s degree preferred. For a general description of benefits that are being offered for this position, please visit alsco.com/benefits. Alsco Uniforms is an Equal Employment Opportunity Employer. Candidates are considered for employment with Alsco Uniforms without regard to their race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status (specifically status as a disabled veteran, recently separated veteran, armed forces service medal veteran, or active duty wartime or campaign badge veteran), or other classification protected by applicable federal, state, or local law.

Job Description General Duties: • Responsible for the execution of the Company's QAQC Manual Control, Supervision of all amendments and revisions., • Control and Distribution of all the Company's Quality Documentation., • Monitor all quality-related activities from shop fabrication through finishing operations., • Responsible for fabricated materials conforming to drawings, shop standards, customer satisfaction, applications, and maintaining records of the same., • Review quality inspection(s) required for each specific governing code., • Control the deposition of all issued nonconformance reports., • Verify the Company's quality requirements are specified to vendors and contractors through documentation submittals., • Perform dimensional and visual inspections of shop fabrication, weld preparations, and final welds. Witness all hydro testing and NDE inspections., • Prepare and control of project (s) quality system management documentation before project start., • Coordinate all QAQC activities with Production Mgr, Shop Mgr, Coatings Mgr, Tank Mgr, and Millwright Supervisor., • Ensures materials and workmanship meet applicable industry codes and standards., • Creates and proofs all WPS & PQRs documents., • Assist shop personnel with the interpretation of drawings and specifications., • Monitor the progress and effectiveness of the project quality management system. Recommend and implement improvements when required., • Provides technical expertise, leadership, time management, problem-solving orientation, and computer literacy., • Review the employee training matrix to keep current shop welder recertification (s). Job Posted by ApplicantPro

Job Description JOB TITLE: QA/QC- Process Piping - CWI SUMMARY: Quality Control inspection and associated documentation of Process Piping systems within a cleanroom environment. DUTIES AND RESPONSIBILITIES: • Coordinate compliance of OSHA, EPA, and other federal, state, and local regulatory Responsible for inspecting all fabricated and installed piping, mechanical equipment, skids, modular systems, and components per project specifications., • Review and approval of Quality Plans, ITPs, PQR, WPS, WPQ, inspection procedures, records for installed pipe which would include weld map log, PMI, slope checks, and traceability logs, and other associated records of installed pipe. Inspections of mechanical assemblies and sub-assemblies for alignment and proper functioning, prepare reports and notify appropriate people of equipment problems and deficiencies, ensure compliance with codes and standard., • Responsible for ensuring that all the valves, tubing, fittings, instruments, and any components will be submitted and approved in accordance with the project drawings and specifications., • Retain records for NDE personnel qualifications / certifications to be submitted for approval and shall be available for review as necessary., • Responsible for verifying that all inspectors under the subcontractors for this project are qualified to perform the inspections they are tasked with in accordance with the project specifications., • Responsible for the initiation of any Surveillance Reports and Non-Conformance Reports and updating the Surveillance Reports and NCR log as a result of any adverse findings during any inspections or witnessed inspections., • Participation in turnover package documentation., • Perform periodic quality checks for all welding performed to ensure that the welding procedures submitted to the contractor are being followed., • Verify that all welders are certified to perform the work they are assigned in accordance with the project specifications and the welder qualification list., • Complete understanding of semiconductor process systems including ultra-high purity and cleaned for oxygen service stainless steel systems, and the ability to competently inspect pipe/tube welds and systems, • Knowledge of systems must include all field and workshop fabrication/construction protocols and means and methods as outlined by industry standard specifications including systems testing and acceptance, • Experience and knowledge of processed piping systems, • Must be able to read P&ID (Piping and Instrumentation Diagrams), • CWI required, • Familiarity with B31.3 and ASME Section 9, • Computer skills required: MS Office, Bluebeam, PowerPoint COMPETENCIES: • Adaptability - Adapts to changes in the work environment; Manages competing demands; Changes approach or method to best fit the situation; Able to deal with frequent change, delays, or unexpected events., • Attendance/Punctuality - Is consistently at work and on time; Ensures work responsibilities are covered when absent; Arrives at meetings and appointments on time., • Dependability - Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments; Commits to long hours of work when necessary to reach goals; Completes tasks on time or notifies appropriate person with an alternate plan., • Interpersonal Skills - Focuses on solving conflict, not blaming; Maintains confidentiality; Listens to others without interrupting; Keeps emotions under control; Remains open to others' ideas and tries new things., • Oral Communication - Speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Responds well to questions; Demonstrates group presentation skills; Participates in meetings., • Problem Solving - Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations; Uses reason even when dealing with emotional topics., • Professionalism - Approaches others in a tactful manner; Reacts well under pressure; Treats others with respect and consideration regardless of their status or position; Accepts responsibility for own actions; Follows through on commitments., • Quality - Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality., • Quantity - Meets productivity standards; Completes work in timely manner; Strives to increase productivity; Works quickly., • Safety and Security - Observes safety and security procedures; Determines appropriate action beyond guidelines; Reports potentially unsafe conditions; Uses equipment and materials properly. Promotes a cooperative Safety Team environment culture of mutual support., • Teamwork - Balances team and individual responsibilities; Exhibits objectivity and openness to others' views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests; Able to build morale and group commitments to goals and objectives; Supports everyone's efforts to succeed., • Technical Skills - Assesses own strengths and weaknesses; Pursues training and development opportunities; Strives to continuously build knowledge and skills; Shares expertise with others., • Occasionally (less than 1/3 of the job), • Frequently (1/3 to 2/3 of the job), • Continually (more than 2/3 of the job), • Frequently required to stand., • Frequently required to walk., • Frequently required to sit., • Frequently required to utilize hand and finger dexterity., • Occasionally required to climb, balance, bend, stoop, kneel or crawl., • Continually required to talk or hear., • Occasionally work near moving mechanical parts, • Occasionally work in high, precarious places, • Occasionally work around fumes, airborne particles, or toxic chemicals, • While performing the duties of this job, the noise level in the work environment is usually moderate., • The employee must occasionally lift and /or move more than 20 pounds., • Specific vision abilities required by this job include Close vision; Distance vision; Peripheral vision; Depth perception and ability to adjust focus., • Must be able to wear personal protective equipment, including protective eye wear, hard hat, lab coat, gloves, steel-toed shoes, hearing protection, and respirators., • Must be able to safely access and traverse indoor and outdoor obstacles for site inspections, including climbing ladders, walking on stairs, catwalks, and other types of uneven surfaces where activity inspections are needed. The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities, or physical requirements. Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Benefits • Health Care Plan (Medical, Dental & Vision), • 401K, • Life Insurance, • Flexible Spending Accounts (FSA), • Disability Insurance, • Paid Time Off, • Training & Development

Job Description PPS is seeking an experienced and talented Welder Level III to join our state-of-the-art semiconductor industry fabrication facility in Phoenix, AZ! The Welder III will be responsible for MIG and TIG welding on a diverse array of products and held to tight tolerances on large and small weldments per AWS codes and symbols. This includes the layout, fit/tack, and fabrication of weldment having multiple details is a welded sequence using welding fixtures and jigs where applicable. Materials include various grades of steel: tube and sheet, stainless steel: tube and sheet, sheet metal, and aluminum: tube and sheet. You will be required to pass a MIG and TIG weld test as part of interview!! This position comes with a highly competitive pay rate, second-to-none benefits, and a high ceiling for growth! Essential Duties and Responsibilities: • Receives instructions, prints, and work orders for the job. Plans details of working procedure and tools and, material requirements., • Perform minor maintenance on equipment., • Assume responsibility and care of assigned tools and equipment., • Observe and practice safety procedures and policies., • Performs advanced welding activities with minimum instructions and supervision., • Interprets complex blueprints, manufacturing drawings, and written work instructions, as well as reads and interprets AWS welding symbols., • Sets up welding equipment in accordance with the appropriate weld process specifications (WPS)., • Completes weldments to the applied AWS welding code and blueprint requirements., • Positions weldment details in location using fixtures, jigs, tape measure, square, rule, and caliper to meet blueprint, manufacturing drawings, and quality requirements., • Utilizes material handling equipment in conjunction with the welding task., • Performs minor maintenance on job-related equipment., • Assumes responsibility and care of assigned tools and equipment., • Observes and practices safety procedures and policies., • Understanding of the use of measuring devices, such as micrometers, calipers, tapes etc., • Qualified to read blue prints., • Fabricates equipment by cutting, burning, and welding various metals., • Cleans and prepares surfaces to be welded., • Subject completed welding tasks to appropriate inspections., • Strong understanding of TIG/MIG welding procedures & processes., • Must have experience working with steel, aluminum and stainless steel., • Ability to read and interpret blueprints and AWS welding symbols., • Ability to perform welds that pass a visual inspection and destructive test., • Ability to use measuring tools (tape measures, squares, rules and dial calipers)., • Basic math skills; must be able to perform conversions and basic calculations., • Knowledge of welding machines and set up., • High School diploma or equivalent experience., • Two year vocational welding program or equivalent experience., • Exerting up to 25 pounds of force occasionally, and/or up to 10 pounds of force frequently, and/or a negligible amount of force constantly to move object., • Ability to stoop, kneel, crouch, walk, push, pull, grasp., • Must comply with Jager-2 Vision test compliance., • Prolonged standing and bending intermittently during work hours., • Ability to move arms, hands and fingers to type., • Close vision required.

Job Description Schedule: Monday through Friday, 5:00 am to 3:30 pm (Full Time) Location: Phoenix, AZ (Onsite) Pay: $28-$35/hr, Based on experience. Overtime pay available. Company Overview: Blue United Sourcing is proud to partner with a leading work-truck upfitter specializing in fleet customization and equipment installations to hire a Wiring Installer & Welder for their growing Arizona operation. The Phoenix-based shop offers comprehensive fleet customization for customer needs— including lighting, installation of service bodies, flatbeds, trailers, specialty equipment, and more. With local manufacturing and a reputation for durable, custom-built products backed by a team of expert craftsmen, our client has been serving contractors, utility companies, government agencies and small businesses throughout Arizona and Nevada for over 30 years. Position Summary We are hiring a dependable Wiring Installer and Welder to join our Phoenix-based team! You will be installing, assembling and MIG welding components of a diverse fleet of work trucks. Work will range from service bodies and lift gates to safety lighting and storage solutions – using various MIG welding techniques and electrical knowledge in a fast-paced, physically demanding environment. Approximately 60% of your time will be spent on electrical work integrated with the truck chassis (12-volt wiring, work-lights, message boards, strobe lights, etc.), with the other 40% spent on welding. You will be creating unique, custom-builds from start-to-finish by taking a blueprint and turning it into a functional work of art! Requirements Key Responsibilities • Install and secure wiring components such as lighting or hydraulics on service bodies, flatbeds, and dump bodies, • MIG weld various equipment and components, • Install lift gates, ladder racks, storage equipment and hydraulic cranes, air compressors and other work-related equipment, • Use hand and power tools to assemble, fit, and mount parts on trucks and trailers, • Accurately follow blueprints, diagrams, and installation instructions, • Maintain an organized, hazard-free work area, • Collaborate effectively with team members and supervisors on-site Required Qualifications • 3+ years of experience in welding/lighting installation, • Experience in 12-volt wiring, • Ability to interpret installation diagrams and instructions and execute accordingly, • Valid driver’s license and reliable transportation, • Able to withstand a physically demanding environment. You will be welding from all positions, at times in extreme heat. Must be able to lift at least 50lbs., • Willingness and ability to learn quickly, • Experience with various hand and power tools. You must own the basic tools required for this position. A list will be provided., • Strong communication and teamwork skills

Job Description MMI Tank & Industrial Services - is a dynamic and growing custom steel tank & industrial equipment manufacturer. Delivering high-quality products to a wide variety of industries. We are looking to add experienced and qualified fitter-welders/fabricators to our shop production team, seeking long-term employees. Guaranteed 40hrs a week, plus overtime. Shop Welders: $20-$30 per hour Shop Fitter-Welder: $25-$30 per hour Shop Machine Operator: $30 per hour Shop General Labor: $20 per hour Shop Maintenance: $30 per hour Shipping & Receiving: $20 per hour Qualifications & Duties • 3-5 years of metal fabrication experience welding in Flux-core & Mig., • Tank Fabrication & welding experience., • ASME Pressure Vessels, • API Tanks, • AWWA Tanks, • UL Tanks, • Custom Tanks, • Reliable transportation & punctual attendance., • Interpret shop fabrication drawings., • Perform high-quality and consistent welds daily., • Read a tape measure proficiently., • Maintain a clean, safe, and organized workspace., • Work as part of a team and have a good attitude. Job Posted by ApplicantPro

Job Description All Things Metal is a structural and miscellaneous steel fabricator and erector located in Phoenix, Arizona. We are seeking a dedicated fitter/welder to join our fabrication shop for a full-time, Monday-Friday position. We are only interested in skilled professionals who can produce efficiently and meet required deadlines. All Things Metal is a fast-paced environment with an existing culture in a challenging industry. We are looking for fitter/welders to help take us to the next level and that are here to stay. This isn't a temporary position where you'll be laid off in a couple months after you complete a job. You will have a minimum of 40 hours per week. All Things Metal is built by positive, hardworking self-starters. That kind of spark creates an undeniable energy we appreciate and embrace. It keeps the work and the team moving forward and improving. At the same time, we’re fueled by humility. Our team knows when to listen, when to adapt, and when to agree to disagree. Responsibilities: • Accurately Layout & Fit-up of steel per shop drawings, • Properly setup welding machine/wire feeder for welding - and adjust settings as required during welding, • Verify and ensure fit-up of full penetration welds comply with plans, AWS D1.1, and welding requirements, and quality control, • Ability to read and properly interpret shop drawings, • Ability to perform welds per AWS D1.1 specification., • Perform clean welds with no inclusions, undercut, porosity., • Cleaning of all slag/splatter from welds and surrounding area, • Ensure equipment used is properly maintained/stored during/after use, • MIG Welding with solid core gas-shielded wire (Light welding of railings/misc. steel), • 3-5 years’ experience in structural steel Fitting, layout, and welding using the Flux Cored welding process, • Candidate must be able to read and interpret shop drawings & plans., • Candidate should be safety oriented (OSHA 10 or OSHA 30 a plus), • A team player, punctual, and motivated, • Applicant must pass in-shop layout/fit-up test., • Must be able to bring your welding hood/gloves/jacket as you will be given a fillet test to ensure proper tack welding abilities as well., • Valid Identification, • Background test and drug screening will be done prior to hire, • Lift and carry objects weighing more than 50 lbs., • Stoop, kneel, crawl, lay, bend, squat, stand and walk for long periods of time, • $20+/hr depending on experience, with opportunity for advancement after the first 90 days, • Full benefits including PTO/ Sick time, • First- Time home buyer incentive with optional home buying references and a $500 bonus, • Dave Ramsey’s SmartDollar Budget & Financial Education Library, • Additional company-wide giveaways, • 401K plan, • Family friendly culture events, • Birthday and Work Anniversary perks #priority, #hiring Powered by JazzHR QhFoLI3Lvz

Job Description Welder IV Location: Phoenix, AZ Shift: 2nd Shift — 2:30 PM to 1:00 AM Pay Range: $25–$30/hr (based on experience) Training: Two weeks on 1st shift About the Role We are seeking an experienced Welder IV to join our Phoenix team. This role involves performing high‐quality MIG and TIG welding on a variety of materials and complex weldments, following AWS codes and blueprint specifications. You will work with steel, stainless steel, aluminum, sheet metal, and tubing in a manufacturing environment. Key Responsibilities • Review instructions, blueprints, and work orders to plan welding procedures, tools, and materials., • Perform MIG and TIG welding on a wide range of metals and weldment types., • Lay out, fit, tack, and fabricate multi‐component weldments using fixtures and jigs., • Clean and prepare surfaces for welding., • Inspect welds to ensure compliance with quality standards., • Perform minor equipment maintenance., • Maintain and care for assigned tools and equipment., • Follow all safety procedures and company policies., • Maintain reliable attendance., • Proficiency in manual and machine TIG/MIG welding., • Ability to read and interpret blueprints and AWS welding symbols., • Strong understanding of welding procedures and machine setup., • Experience with steel, aluminum, stainless steel, and sheet metal., • Ability to produce welds that pass visual and destructive testing., • Skilled in using measuring tools (calipers, micrometers, tape measures, squares)., • Basic math skills for conversions and calculations., • High school diploma or equivalent., • Work performed primarily in a manufacturing environment., • Reasonable accommodations may be made for individuals with disabilities., • Ability to lift 10–20 lbs infrequently; up to 50 lbs occasionally., • Frequent standing, bending, kneeling, crouching, reaching, pushing, pulling, and walking., • Exposure to fumes, dust, gases, chemicals, and temperature changes., • Required use of PPE., • Possible exposure to noise, moving mechanical parts, and electrical hazards. Apply today and experience the SkySource difference!SkySource Solutions believes in attaining success. We know success is important to our clients, applicants, candidates, and our internal staff and want to be an integral part of that process.\r\nThe SkySource Difference: We are not just another staffing firm! We truly care about our candidates long-term success and how we get there together. So the BIG Question is... How do we get there?\r\nOur team of Recruiters come with 5 plus years of industry experience and are not looking to just find you a job. We truly care about your short-term and long-term career goals and understand what's important in making that next career move. We want to understand what you are looking for from a cultural, compensation and benefits perspective. \r\n\r\nApply today and experience the SkySource difference!

Job Description Ironworker / Welder (Commercial Modular Manufacturing) Russo Modular is a commercial modular building manufacturer specializing in steel-framed modular construction. We are seeking a skilled Ironworker / Welder to join our fabrication team in a shop-based manufacturing environment. Job Responsibilities • Weld and fabricate structural steel components for modular buildings, • Read and interpret blueprints, shop drawings, and specifications, • Cut, fit, and assemble steel members, • Perform MIG, Flux-Core, and Stick welding (TIG a plus), • Ensure welds meet quality, safety, and structural standards, • Work efficiently to meet production schedules, • Maintain a clean and safe work area, • At least 3 years of experience as an ironworker and/or structural welder, • Experience in 3G and 4G stick welding, • Ability to read blueprints and use measuring tools, • AWS welding certification (or ability to obtain within 30 day of employment), • Manufacturing or fabrication shop experience a plus, • Reliable, detail-oriented, and safety-focused, • Competitive pay based on experience, • Full-time, steady, year-round work, • Overtime opportunities, • Benefits package including health insurance, paid time off, and holidays, • Indoor, controlled work environment (no travel or field-only work) Russo Modular designs and manufactures commercial modular buildings using high-quality steel framing. Our controlled manufacturing process allows for consistent quality, safety, and efficiency.

Job Description Resolute Performance Iron is currently looking for structural fitters. General responsibilities and qualifications listed below. Shop Fitter/Welder Scope and Responsibilities • Use MIG welding equipment to manufacture parts and assemblies in accordance with AISC and job specific standards., • Supply quality parts and assemblies from jigs and fixtures for the welders to complete., • Work on special projects as required., • Support QC by taking feedback into their work and making the necessary changes for a quality product., • Operate necessary equipment to perform tasks – includes but not limited to cranes, forklifts, mag drills, torches, hand tools, power tools, etc., • Arrange parts and pass along important information to welders., • Review fabricated assemblies for accuracy against drawings., • Participate and attend safety and company meetings., • Minimum 2 years of experience fitting/welding., • Familiar with jigs and fixtures. Familiar with hand and power tools., • The ability to read blueprints/engineered drawings., • Able to lift and carry 50lbs without assistance. sFImiRqOpm

Job DescriptionWe are currently seeking experienced welders to join our National Projects team. Our crews work locally in various locations or travel to project sites throughout the country with a large volume of our work located in Southern Arizona. We also have active work opportunities throughout the rest of Arizona, Texas, Oklahoma, New Mexico, Florida, and elsewhere. Much of our work is federal, so employees have the opportunity to earn prevailing wages (Davis Bacon Act) based on their location. Responsibilities. * Take charge of all assigned work and maintain a sense of ownership of all scope on-site * Walk the site in an observant manner, taking note of hazards and, when appropriate, correcting them accordingly * Develop an awareness of the entire project to include other trade work * Communicate with fellow crew members, assigned foreman, and with public, customers, or adjacent trade crews when necessary * Use various welding methods to create new piping systems and repair existing ones Requirements. * Be able to test out in accordance with ASME Section IX and weld pipe in the 6g position

Job Description United Integrated Services (USA) Corp. was founded in Phoenix, Arizona in 2020. UIS is a U.S. subsidiary of United Integrated Services Co., Ltd. (UIS Taiwan) which was founded in Taiwan in 1982. UIS is a multidisciplinary engineering and construction company. We provide fully integrated design-build services to our clients in the high-technology industry for their manufacturing facility needs. Our scope of services includes engineering design, high-tech factory planning, and on-time equipment and material delivery in which clean-room systems, HVAC, electrical systems, and tool hook-up, are all vital parts in need of total coordination. Summary: United Integrated Services (USA) is looking for a Welder to join our team! The Welder will be responsible for fabricating and assembling metal structures and equipment using welders, cutters and other metal fabrication equipment. The ideal candidate will have strong experience with welding processes, a deep understanding of safety protocols, and the ability to read blueprints and schematics to ensure projects are completed accurately and efficiently. Apply today to learn more! This is a full-time onsite position located in North Phoenix, AZ Essential Duties and Responsibilities include the following. Other duties may be assigned. • Use MIG, TIG, stick, and other welding techniques to join, fabricate, and repair metal components according to project specifications., • Read and interpret engineering drawings and specifications to determine appropriate welding techniques., • Cut and align metal materials before welding, ensuring proper fit and finish., • Fabricate and weld structural components, pipes, beams, and other items as needed, ensuring adherence to specifications and quality standards., • Inspect welded joints and components to ensure that they meet company and industry standards, making any necessary adjustments to prevent defects., • Set up and operate welding machines, hand tools, and power tools required to complete jobs., • Adhere to company safety policies, including wearing personal protective equipment (PPE) and following proper handling techniques for hazardous materials., • Conduct routine maintenance on welding equipment and perform repairs on metal structures as needed., • Work alongside engineers, fabricators, and other team members to meet project deadlines and ensure work quality., • Monitor welding processes to avoid overheating, warping, shrinking, or other welding defects, ensuring the final product meets quality standards. The requirements listed below are representative of the knowledge, skill, and/or ability required. Education/Experience: • High School diploma/GED., • Completion of a technical school welding program, required., • Ability to attend and pass a third-party welding test (PNL - Phoenix National Laboratories)., • 2-5+ years of welding experience in construction or manufacturing environment., • Proficiency in MIG, TIG, arc, and stick welding., • Experience with fabrication tools, including grinders, drills, and saws., • Ability to read and interpret engineering blueprints, schematics, and welding symbols., • Strong hand-eye coordination and attention to detail., • Strong organization and time management skills., • Ability to act with integrity, professionalism, and confidentiality., • Ability to effectively prioritize responsibilities depending on project needs. Ability to effectively present information and respond to questions from groups of managers, and employees., • Ability to develop and maintain successful relationships with all levels of employees, clients, and subcontractors., • Must be able to work under pressure and meet deadlines while maintaining a professional attitude., • Excellent verbal and written communication skills in English., • Must have and maintain a valid Arizona driver's license. May be required to travel to other sites within Arizona to perform certain work functions. Physical Demands & Work Environment This position requires the ability to lift and carry up to 50 lbs for transporting documents, equipment, and other materials as needed. The role involves extended periods standing, walking and/or of sitting while working at a computer. Frequent movement between the construction trailer and various areas of the construction site is necessary. The position is based at the construction job site (trailer office). Even though the exposure of hazardous work conditions would be minimal, the employee may be required to visit the work area of the jobsite and thus be exposed to some typical work hazards that may be present on a construction site, such as dust, moving machineries, weather, caustic chemicals, noise etc. UIS would provide the required safety protection to ensure the safety of UIS employees and comply with all OSHA standards. Equal Employment Opportunity: UIS is an Equal Opportunity Employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, veteran status. Or any other characteristic protected by federal, state, or local law. We believe in fostering a diverse and inclusive workplace where all individuals are treated with respect and dignity. Disclaimer: The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties as assigned by their supervisor.