Clean power jobs in Hempstead, New YorkCreate job alerts

Job DescriptionPower-Flo Technologies is seeking a motivated individual to join our team as an HVAC Controls Technician. We are a two location temperature controls distributor specializing in providing engineering, materials, and startup assistance for temperature control systems. We are looking for someone to work independently in the field to startup, service, and support these systems in coordination with our in-house engineering team. What Will Make You Successful in This Role? • Experience and certification with programming either Johnson FX controllers (CCT) (preferred), Honeywell Spyder, and/or Niagara AX/N4 (any brand)., • Experience with ACAD, or similar CAD software., • Knowledge of industry-standard communication protocols such as BACnet MSTP, BACnet IP, Niagara, JCI N2, Modbus, Lon, Etc., • Niagara N4 certification., • 3 years of building automation experience required., • Strong understanding of commercial HVAC systems operations., • Ability to read mechanical prints and schematics., • Ability to work independently and in a team setting., • Basic knowledge regarding use of a PC (Microsoft Word, Excel, Outlook)., • Competent with the use of electrical test equipment, i.e., Multi meter, shop tools, hand tools, pneumatic tools., • Mechanical aptitude required., • The ability to troubleshoot basic electric and electronic circuitry including reading and interpreting electrical and electronic diagrams., • Valid and clean NYS Driver's License to operate company vehicles., • Ability to Stand for 8 Hours, • Ability to lift 50 pounds, • Ability to work on elevated platforms, • Ability to climb ladders, • This position may require standing, stooping, bending, kneeling, crouching and/or reaching Salary Range: $60,000 – $100,000/year Benefits • Health Insurance (medical, dental, vision), • PTO Program and Paid Holidays, • 401K, • EAP, • ESOP (Employee Stock Ownership Plan) We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Hiring CDL-A Truck Drivers BIG PAY, SERIOUS FREIGHT - Pros earn up to $150,000 per year* CLIMB THE PAY LADDER - Clear advancement paths to higher-paying loads STRONG STARTS, SOLID BENEFITS - $1,200 orientation pay + benefits that support your career Why Drive for Lone Star Transportation: At Lone Star, flatbed drivers don't get stuck in one lane - they move up. Our operation is built around rewarding skill, experience, and reliability with access to better freight and higher earning potential. From standard flatbed to RGN and step deck opportunities, Lone Star gives professional drivers a clear path to premium work, modern equipment, and long-term career growth. If you're ready to run challenging freight, earn more for your expertise, and be backed by a company that invests in your future, Lone Star is where you level up. Flatbed Truck Driver Job Overview • Earning power that matches your skill. Standard OTR drivers earn up to $85,000 per year, with weekly pay averaging up to $1,800. Specialized drivers hauling RGN and step deck freight can earn up to $150,000 annually.*, • Multiple freight paths available. Access standard flatbed, step deck, and RGN opportunities - plus salary pay options for qualifying positions., • Paid start and bonus opportunities. Earn $1,200 orientation pay, plus safety and clean inspection bonuses that reward professional driving.*, • Home time that lets you reset. Enjoy 3-4 days to reset at home between runs. Drivers typically out 3-4 weeks., • Benefits that cover the essentials. Comprehensive medical, dental, and vision insurance, plus 401(k) with company match and paid time off., • Extras that matter on the road. No-cost rider program, toll tags, and CAT scale pass included. There is no deadline to apply. Applications are accepted on an ongoing basis. Driver Requirements • Valid CDL A License, • Must be 22 years of age, • 1 year OTR experience in the last 3 years OR 2 years of OTR experience in the last 5 years Work Location: On the road Reference Number: 200800051-033126

Warehouse Associate – AV Pros NY Location: In Person | Full-Time | $20–$25/hr AV Pros NY is looking for a reliable and motivated Warehouse Associate to join our team. This role is perfect for someone who enjoys working in a fast-paced environment, takes pride in organization, and wants to be part of a growing company in the low voltage, IT, and AV industry. 👉 Important: Candidates MUST hold a valid Electric Forklift Certification and Scissor Lift Certification. If you’ve worked at companies like Best Buy, Microcenter, Home Depot, Lowe’s, or a large low-voltage distributor, we’d love to hear from you! What You’ll Do Warehouse Duties: • Receive and verify incoming inventory from carriers., • Accurately log items into our internal system (POs, manufacturer info, part & serial numbers)., • Keep warehouse inventory organized and updated to prevent extra orders., • Stock, stage, and prepare materials for technicians and projects., • Safely lift up minimum 50 lbs and work on ladders when needed., • Maintain a clean, organized, and safe warehouse environment., • Operate forklifts and scissor lifts for incoming/outgoing deliveries., • Assist with cleaning, stocking, and staging company vehicles., • Perform basic vehicle maintenance, including oil changes and tire changes., • Drive company Sprinter vans to job sites or distributors for pickups/deliveries. eBay Store Management: • Fully manage our eBay store, including:, • Creating and maintaining listings, • Handling shipping and packaging when items sell, • Responding to customer inquiries promptly and professionally, • Monitoring and maintaining reviews for all transactions What We’re Looking For • Electric Forklift Certification (Required), • Scissor Lift Certification (Required), • OSHA 30 & SST (Preferred), • Minimum 1 year of warehouse experience, • Ability to lift minimum 50 lbs and work on ladders, • Knowledge of basic hand tools and power tools, • Computer skills, including Microsoft Excel, • A team player with a positive, can-do attitude, • Strong attention to detail, organization, and problem-solving skills, • Clean driving record and ability to follow all traffic laws Why Join AV Pros NY? • Competitive pay: $20–$25 per hour, • Benefits package including:, • Dental insurance, • Vision insurance, • Health savings account/Flexible spending account, • Life insurance, • Paid time off, • Birthday paid day off, • Paid Holidays, • Professional development assistance, • Commuter program, • Employee discount, • Steady schedule: 8-hour shifts, Monday–Friday, • Opportunity to learn, grow, and build a career in a fast-growing AV company, • ✨ If you’re dependable, safety-minded, and ready to take on a key role in keeping our operations running smoothly, apply today and grow with AV Pros NY!

Who We Are We are a team of motivated, engaged, and exceptionally talented self-starters, willing to roll up our sleeves and do what is necessary to get the job done. If you are interested in joining this dynamic team and have a passion to learn, develop, and want your experience to make an immediate impact, please apply. To find out more about us, please visit our website: What We Offer We offer an environment of continuous development and growth with a thriving company culture, exceptional colleagues, and exceptional benefits. Our benefit package includes: • Hybrid work options available and flexible hours, • Excellent health insurance, • No employee cost for dental and vision insurance, • Paid holidays and generous paid time off, • Professional development opportunities, • Educational assistance opportunities, • Multiple retirement plan options with company contribution, • Short-term and long-term disability coverage, • Flexible spending account with company contribution, • Life Insurance, • 529 College Savings Program, • $300 Wellness Reimbursement What You’ll Do At LIPA The Administrative Assistant assists in fulfilling LIPA’s purpose of clean, reliable, and affordable electric service for our customers on Long Island and the Rockaways by providing administrative support to ensure efficient operation of the office, supporting management and staff with a variety of tasks. This position is responsible for assisting with all administrative functions, including scheduling, filing, copying, and maintaining organization and cleanliness throughout the office, as well as other various tasks, for all employees. Provide primary administrative support to departments outside of the CEO’s office. Partner with and act as a backup for requests and responsibilities by the administrative team. Essential Job Functions include: General Administrative Duties • Perform administrative and staff support duties for the organization; receive and respond to correspondence; receive and direct visitors; maintain contact lists and perform other duties as assigned, • Cover the front reception desk and telephones when required, • Provide information by answering questions and requests, • Carry out administrative duties such as filing, typing, copying, binding, scanning, etc., • Handle sensitive information in a confidential manner, • Receive, sort, and distribute the mail, • Provide general support to visitors Calendars and Scheduling • Prepare, schedule, coordinate and organize meetings as required, including scheduling of attendees, conference room reservations, presentation preparation, room preparation, and preparation and distribution of meeting materials and minutes, • Maintain and coordinate calendars and appointments, • Coordinate travel calendars, approvals and arrangements Document Preparation • Prepare reports, research, and create and present materials, • Assist in the preparation of regularly scheduled reports Preparing and Maintaining Procedures • Maintain computer and manual filing systems, • Develop and maintain office and administrative procedures, • Develop and update administrative systems to make them more efficient, • Performs other duties as assigned What We Need: • High School Diploma or equivalent, • Two (2) years of administrative assistant experience to successfully perform the job duties and responsibilities, • Proficient in MS Office and computer programs such as Microsoft Word, Power Point, Excel, and Outlook, • Skilled in typing, • Excellent verbal and written communication skills, • Meticulous attention to detail and problem-solving skills, • Strong organization and planning skill, • Strong interpersonal skills, • Excellent time management skills and ability to multitask and prioritize, • Working knowledge of office machinery, • Ability to maintain confidentiality of information, • Ability to perform work independently and with others, • Ability to multi-task, prioritize and meet deadlines, • Demonstrated ability to provide exceptional customer service, • Skilled in exercising sound judgement, • A proven ability to establish credibility and maintain effective working relationships with a broad range of internal and external contacts across all organizational levels Salary Range: • $54,000 - $66,000 How You Can Apply: Interested parties should submit their cover letter and resume to: Gary Martens, Director, Human Resources and Administration, at . LIPA is an equal opportunity employer. All people with disabilities are encouraged to apply. If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to Gary Martens, Director, Human Resources and Administration.

Job Purpose: The primary responsibility of this position is to transport assigned operational components, supplies and materials to requesting departments as well as transport full pallets of finished goods to storage and staging areas, loading and unloading trailer for delivery with a power and pallet jacks in a timely manner, observing all safety regulations and ensuring all cGMP and quality standards are met and to maintain the efficient flow of product through the production process. Individual will complete SAP needed transactions to request components for production and perform inventory adjustments. Major Accountability: • Possesses required knowledge of SOP’s, cGMP’s, procedures, SAP entries and has the ability to explain the requirements to others as needed., • Independently utilizes required Personal Protective Equipment and Safety Gear and performs a safety check on equipment to be used in the daily operations and ensure that all safety devices are functioning properly., • Responsible for the movement of WIP materials within the warehouse., • Communicates with Lead Operators and Management to maintain an efficient flow of material through the production process. Checks Compounding and Production schedules for batches to be run, transports materials and supplies to point of use staging area with the appropriate PIT equipment, • Responsible for the activities associated with the processing of finished goods for outbound deliveries., • Keeps assigned areas clear and clean and transports unused components back to storage as required. Performs SAP inventory transactions, as required, to keep WIP inventory and Bin locations accurate., • Responsible for overall housekeeping and organization of WIP Warehouse, including cycle counting, reconciliation and material destructions. Cleanliness of pallets/material containers, ensuring cleanliness and good condition of materials delivered to manufacturing. Also, maintain overall housekeeping of Production Staging Areas in Packaging, including cycle counting and reconciliation., • At the end of shift, secure all equipment, perform general housekeeping duties and accurately complete all required paperwork., • Performs other duties as assigned, • Adheres to all applicable procedures, cGMPs, company policies and any other quality or regulatory requirements. (For example: OSHA, DEA, FDA, EMEA, ANVISA, HS&E, etc.), • Note: This position may require the labeling, packaging or movement of hazardous (flammable, corrosive, toxic, etc.) waste within the facility. If so, this employee would be trained under OSHA’s HAZWOPER standard, 29 CFR 1910.120 as an 8-Hour first responder, 24-Hour incident commander, or a 40-Hour incident commander., • In lieu of HAZWOPER training, the employee will receive training on the requirements of the Resource Conservation and Recovery Act pursuant to 40 CFR 265.16., • All employees that have received the above mentioned training upon hire will receive annual refresher training that covers the OSHA HAZWOPER standard and the requirements of RCRA. Key Performance Indicators • Participate in Behavioural Based Safety Program (BBSP) by complying with all safety procedures and preventive measures (i.e., wearing Personal Protective Equipment (PPE), following lockout/tagout procedures)., • Ability to work independently and as part of a team in a fast in a fast-paced environment to meet the departments daily productivity and replenishment requirements., • Demonstrated ability to manage multiple tasks simultaneously and be able to react to shifting priorities to meet business needs, • Demonstrated technical skills and knowledge of warehouse processing, • Strong team player; open to assisting with any task in order to get the work completed, • Quick learner; able to establish rapport and develop relationships, • Must be able to identify and recommend improvements., • Ability to learn and apply new software multimedia applications, • Ability to lift up to 50 lbs., • Ability to stand for extended periods of time Education/ Experience/ Background Education: High School diploma or equivalent Languages: Fluent in written and spoken English Experience: 4 years of related experience

NO CUTS. NO COLOR. JUST BLOWOUTS! DO YOU HAVE WHAT IT TAKES TO JOIN THE DRYBAR FAMILY? Drybar started back in 2010 with its first shop in Brentwood, CA. 16 years later and over 150+ locations across the U.S., Drybar has exploded into a nationally recognized and highly sought-after brand. At Drybar, our philosophy is simple. Focus on one thing and be the best at it. For us, that’s blowouts! With that purpose in mind, we are focused on giving each and every employee the premier blowout experience. We believe it’s not just blowouts we are selling, its happiness and confidence! Our 10 Core Values: 1) It’s the Experience 2) It’s not just the Blowouts 3) Be Yourself 4) Embrace the Power of Random Acts of Kindness 5) Have Fun 6) Always be Growing 7) Nothing is sexier than Honesty and Humility 8) Make a Difference 9) Pretty is as Pretty Does 10) We are family! We strive for an inclusive & diverse culture by seizing every opportunity, by providing flexible work schedules for our staff, creating open community culture, streamlining our operations and implementing new strategies to drive your experience at Drybar to be the best ever! *Your success is our success. What are you WAITING for? * WHAT YOU’LL GET… • Competitive Pay and Amazing Bonus Incentives - Additional $$$ given for all membership sales, product sales and ad-ons., • Competitive compensation plan with potential to make additional $3 per blowout performed., • 30% employee discount off all Drybar Products & Tools, • Health, Dental, Vision, Life Insurance & 401K options, • Paid Time Off and Personal Days Given, • Anniversary Gift Cards given after a year of working at Drybar, • Employee Discounts: Hotel, Theme Parks, Rental Cars, Movie Tickets etc., • Free Blowouts for Employees! *Get Amazing Drybar Benefits on US! What’s there NOT to love? * WHAT YOU’LL DO… We value endless growth and learning, a team mentality, discipline and a positive attitude. The ideal candidate would possess: • Lead all clients from check in to check out, ensuring Drybar standards are upheld, creating an amazing client experience! Engage with clients and serve complimentary beverages., • Set the tone of a positive shop atmosphere by approaching the day as if hosting a party., • Organize and execute shop flow between clients and team members in a positive manner., • Serve as subject matter expert in reservation system. Ensure client information is recorded with accuracy and timeliness., • Ability to sell memberships, rebook appointments during check out to increase client retention., • Troubleshoot any reservation system issues, make necessary changes to client profiles, optimize appointments to fit business needs, and check notes to ensure clients’ needs are met., • Optimize and maximize appointments with reservation system and ensure timely communication with customer service team., • Maintain highest degree of ethics when handling client payments and stylists’ tips/commissions. Balance cash drawer at opening, close and at shift changes., • Problem solve when faced with client concerns or operational issues, always ensuring the solution is focused on providing an excellent experience to the client., • Maintain overall shop cleanliness by conducting walkthroughs behind the bar and keeping front desk area clean., • Maintain clear communication with shop management about overall shop operations., • Educate clients on Drybar products and tools, have the ability to sell and restock shelves., • Uphold Drybar’s 10 Core Values. WHAT YOU’LL NEED… We want you to succeed in this position and will help coach you in refining your skills. The ideal candidate would possess: • Cosmetology license preferred, but not required., • Strong conceptual thinking. We want our team to be able to start projects off from an incredibly strong position and come up with unforeseen, clever concepts to move forward with a deep level of care about the quality of your work and how it reflects on your character is the Drybar way., • Strong self-management practices with meticulous attention to detail. Be able to deliver a solid approach to consistent, development ready work., • Honesty, Integrity & Fairness. Respect for individual ability, creativity and diversity., • A natural inclination to be pro-active and take the lead in solving problems as you find them. A hunger for personal and professional growth., • Strong communication skills (both written and verbal), discretion, professional openness, and other leadership skills needed to coordinate and facilitate healthy, well-organized teamwork., • Having a sense of humor and being witty isn’t a bad thing either! Having enjoyment of work and life balance is key here at Drybar!

Watch Technician Opportunity with One of the World's Most Popular Jewelry Brands!! This Jobot Job is hosted by: Jennifer Thomas Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $50,000 - $70,000 per year A bit about us: Founded over 100 years ago, we are an international manufacturer of retail luxury goods and jewelry. Our vision is to lead the affordable luxury watch market by offering the most compelling collection of brands and products that are loved, favored, and respected by people around the world. Come join our family and be a part of something special! Why join us? • AMAZING Company Culture • Healthcare Coverage (Medical, Prescription Drug, Dental, Vision), • Savings Plan (401k and Roth 401k), • Flexible Spending Account (FSA), • Dependent Care (FSA), • Health Savings Account (HSA), • Group and Voluntary Life & AD&D Insurance, • Group Long-Term Disability (LTD), • Voluntary Accident Insurance, • Voluntary Critical Illness Insurance, • Educational Assistance, • Employee Purchase Program, • Vacation and Sick Time Pay, • Company Holidays Job Details The Watchmaker I or II is responsible for evaluating, repairing and testing quartz, digital and mechanical watches; refinishing cases; resizing bracelets and replacing bands; and maintaining records of their work. Responsibilities: • Changes batteries and energy cells, • Replaces 2 hand, 3 hand movements, and complicated multifunctional movements, • Sizes watch bracelets and band replacements, • Polishes and refinishes watches, • Sets digital and quartz watches with multiple functions, • Diagnoses and estimates internal and external issues of all watches, • Performs vacuum and pressure testing of watches, • Uses a voltage/ohm meter to test power consumption of movements and capacitors, • Understands how to quality control your work after completion, • Maintains strict guidelines for productivity, quality, and high standards of individual performance, • Works in coordination with the rest of the team to ensure smooth operations (maintain equipment & tools, order consumables), • A high school diploma and a minimum of three years experience as a Watchmaker or equivalent combination of education and experience., • Experience repairing quartz, digital and mechanical watches, • Experience with standard Swiss equipment such as timing machines (i.e. Witchi, Elma, Greiner), vacuum and pressure testers, case opening tools, etc., • Ability to cope under pressure in a busy & fast paced environment, • Ability to maintain a quick & efficient workflow, repairing numerous watches per day, mixing complex and standard work tasks daily, • Basic computer knowledge for reporting, tracking of repairs, and managing daily tasks, • Team player, good communication skills, drive for excellence, customer service focus, • Attention to detail Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job DescriptionSalary: $22-25 per hour Catholic Charities of Long Island models the love of Jesus by offering dignified and compassionate care to poor and vulnerable neighbors of every faith and background. In-person service at more than 50 sites throughout Nassau and Suffolk counties is inspired by the Gospel call affirming the sacredness of every human life. CCLI is looking for a full time Maintenance Technician with a generous heart and a desire to contribute to the well-being of others to carry out our mission on Long Island. By joining our team, you will share in the joy of providing care with dignity and life with hope. Responsibilities: • Maintain the overall condition, safety, and appearance of agency facilities and grounds through routine maintenance, repairs, and general services., • Perform basic household electrical repairs, installations, and appliance hookups and recognize when a licensed electrician is required by notifying the supervisor., • Implement routine household plumbing, maintenance, repairs and installations., • Complete routine carpentry, construction, alteration, repair and maintenance of buildings., • Clean and prepare surfaces for painting. Paint interior and exterior walls, ceilings, and cabinet work., • Maintain facility grounds, remove snow from walkways as directed, and perform general services., • Keep records, complete required paperwork, attend required meetings, and perform related duties as assigned. Qualifications: • High school Diploma or GED. Valid NYS Drivers License, • 4 years of progressive experience in building maintenance, facilities maintenance, construction, or related field., • Working knowledge: basic electrical, plumbing, carpentry, painting, and general repair techniques., • Proficiency in the safe use of hand tools and power tools, • Ability to lift and carry up to 50 pounds as well as to walk/stand for full shift, climb ladders, and perform other physically demanding tasks., • Ability to work outdoors in conditions of extreme heat or cold as needed., • Positive and effective communication skills for interacting with staff, vendors, clients, and management., • Basic computer skills for completing records, work orders and required paperwork. Schedule: Full time - 40 hours per week Monday through Friday Rate of Pay: $22-25 per hour

Job Description CNC Machine Maintenance Engineer - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The CNC Machine Maintenance Engineer position is responsible for performing highly diversified duties to install, troubleshoot, repair, and maintain production and facility equipment according to safety, predictive, and productive maintenance systems and processes to support the achievement of the site’s business goals and objectives. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Perform highly diversified duties to install and maintain production machines and the plant facility’s equipment., • Provide emergency/unscheduled repairs of production equipment during production and perform scheduled maintenance repairs of production equipment during machine service. Must have experience with Vacuum Braze Ovens., • Perform simple machinist duties and responsibilities., • Perform mechanical skills, including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting, and repair of production machines., • Read and interpret equipment manuals and work orders to perform required maintenance and service., • Diagnose problems, replace or repair parts, test, and make adjustments., • Perform regular preventive maintenance on machines, equipment, and plant facilities., • Perform a variety of plumbing maintenance and carpentry functions., • Use a variety of hand and power tools, electric meters, and material handling equipment in performing duties., • Detect faulty operations, defective material, and report those and any unusual situations to proper supervision., • Comply with safety regulations and maintain clean and orderly work areas. QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Technical Capacity., • Good Troubleshooting Ability., • Ethical Conduct., • Communication Proficiency., • Results Driven., • Initiative., • Valid Driver’s License., • Experience with the maintenance of CNC Machines or Vacuum Braze Ovens EDUCATION AND/OR EXPERIENCE • High school diploma/GED and completion of a craft apprenticeship, or an equivalent number of years of education and production maintenance experience., • 2+ years of manufacturing experience; some hydraulic, pneumatic, mechanical, and industrial skills with PLC experience, Industrial and Commercial electric, and HVAC., • AA in mechanical or electrical Engineering or a Certificate in Analytical Troubleshooting preferred. 5+ years in manufacturing/facilities maintenance preferred. PHYSICAL DEMANDS • While performing the duties of this job, the employee is regularly required to talk and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing all day. The employee must frequently lift and/or move items over 50 pounds., • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Fine manipulation and repetitive motion may be required for some duties. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $110,000 to $125,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job Description Location: On-Site in Garden City Park & Field Work Schedule: Full-Time. Monday - Friday, 7 AM - 3:30 PM with overtime opportunities. Pay: $26 - $45/hour (commensurate with direct experience) Benefits: Health insurance (medical, dental, vision), EAP, PTO, paid holidays, 401K, ESOP (Employee Stock Ownership Plan) Power-Flo Technologies' Pump and Motor Repair Shop in New Hyde Park, NY is seeking an experienced Pump Mechanic to join our team. Pump Mechanic Responsibilities Include : • Assess machinery to accurately diagnose and repair issues, • Liaise with clients to determine their requirements and communicate defects or problems, • Provide routine inspections of equipment and inform clients of any issues, • Keep an accurate log of all work performed, • Install replacement bearings, seals, shafts, and gaskets, • Replace and wire electric motors, • Adhere to company work safety policies, • Complete jobs both in our shop and at job sights, • Respond to work orders for troubleshooting, repair and feedback to Supervisor, • Mechanic will be responsible to make emergency repairs within area of knowledge and responsibility, • Familiarity with hand tools, power tools, disassembly, multimeter, etc. Pump Mechanic Qualifications : • 5+ years' experience in pump mechanics, • Knowledge of pump systems and electric motors, • Ability to work both with a team and independently, • A valid and clean driver's license to operate company vehicles We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description Location: On-Site in Garden City Park & Field Work Pay: $26 - $45/hour (commensurate with direct experience) Schedule: Full-Time. Monday - Friday, 7 AM - 3:30 PM with overtime opportunities. Benefits: Health insurance (medical, dental, vision), EAP, PTO, paid holidays, 401K, ESOP (Employee Stock Ownership Plan) Power-Flo Technologies' Pump and Motor Repair Shop in New Hyde Park, NY is seeking an experienced Pump and Motor Mechanic to join our team. Pump and Motor Mechanic Responsibilities Include : • Assess machinery to accurately diagnose and repair issues, • Liaise with clients to determine their requirements and communicate defects or problems, • Provide routine inspections of equipment and inform clients of any issues, • Keep an accurate log of all work performed, • Install replacement bearings, seals, shafts, and gaskets, • Replace and wire electric motors, • Adhere to company work safety policies, • Complete jobs both in our shop and at job sights, • Respond to work orders for troubleshooting, repair and feedback to Supervisor, • Mechanic will be responsible to make emergency repairs within area of knowledge and responsibility, • Familiarity with hand tools, power tools, disassembly, multimeter, etc. Pump and Motor Mechanic Qualifications : • 5+ years experience in pump mechanics, • Knowledge of pump systems and electric motors, • Ability to work both with a team and independently, • A valid and clean driver's license to operate company vehicles We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description Line Engineer (Maintenance Technician) Location: Brookville Hotel @ JFK NEW YORK CITY 154-71 Brookville Boulevard | Rosedale, NY 11422 SUMMARY: Keep all equipment in good repair with a minimum of downtime by providing day-to-day maintenance of the hotel under the direction of Engineering Management. Continually work towards and support the improvement of engineering service to both guests and associates. RESPONSIBILITIES: • Report to work on time and in full uniform., • Train and instruct other members of the staff through sharing of knowledge and skills., • Operate as an independent mechanic by analyzing problems, identifying courses of action, and implementing solutions with available resources and to a high degree of quality., • Keep accurate completion and task records in the project files. Set an example of continuous self-development., • Plunging toilets, unclogging drains, repairing all types of hardware, plumbing, and electrical equipment including lamps, air conditioners and cosmetic items., • Clean, lubricate, protect, and otherwise maintain all tools and equipment in the hotel. See that all tools used are returned to the shop and secured in proper storage area., • To protect and otherwise maintain your assigned tool pouch and its tools at the discretion of the Engineering Management., • Monitor systems as necessary, to be fully informed of the system operation and to handle emergencies involving the systems., • Have a working knowledge of fire sprinkler and emergency power systems. Observe and analyze energy and utilities usage in the hotel and on the grounds., • Look for ways to conserve energy and report any ideas to the Engineering Management., • Be available for any emergencies and act in an engineering capacity to protect our guests and associates, and preserve the building and its systems during the emergency., • To act as quickly and responsibly as possible to return the building to its normal operating status. To inform Engineering Management of any such emergencies., • Be aware of all existing departmental Job Safety Analysis and to strive to work in an accident-free manner and to create a safe work environment for others., • Continuously look for conditions which may endanger associates or guests of the hotel and to take immediate action to correct any hazardous conditions found., • Read, log, track, and interpret readings from meters, gauges, and other measuring units., • Maintain a thorough log of each day’s activities and problems that occur and to ensure this information is passed on to other shifts., • Clean all engineering areas as directed by Engineering Management., • Work in a neat and efficient manner, keeping work areas clean and well organized., • Serve as otherwise directed or needed to help maintain the effective and efficient operation of the hotel at the discretion of Engineering Management or the hotel General Manager., • Complete all work assigned in a safe and professional manner. Maintain communications with supervisors to ensure that all needed materials, tools, and supplies are available or on order., • Follow up on any items that may be on back order. Keep supervisor updated on assignments., • Provide training and technical advice to other engineers as needed or requested., • Maintains a working knowledge of all federal, state, and local laws, codes, and regulations., • Maintains a professional image at all times., • Maintains the hotel facility and related equipment in a safe and efficient manner., • Provides for a safe work environment by following all safety and security procedures and rules., • Reads, learns, understands, and refers to the Standard Operating Procedures., • Each associate will be required to follow the rules as found in the M&R Employee Handbook. Performs other duties as assigned by management, of which employee is capable of performing

Job Description Be part of a BAS team that reduces carbon footprints and promotes a greener planet. At US Energy Group (a Power-Flo Technologies company), we are experts in Adaptive Energy Management, improving the way thousands of buildings use energy. We are expanding our Field Technician team. Field Technician Responsibilities: • On-site installations (boiler controls), • On-site troubleshooting controller boxes, • Internet configuration (all boilers are connected to the internet), • Product support, • Customer relations Field Technician Qualifications: • At least 1 year of experience with building management systems OR 2 years of experience in technical field work, • Familiarity with boiler control wiring, low voltage cabling, and working knowledge of conduit, fittings, and line voltage wiring., • The desire to learn and develop a deep knowledge of Building Automation Systems using advanced products of a major automation system manufacturer, • The desire for continued career development, product knowledge, varied industry experience, • Good communication and customer relationship skills, • Ability to use hand tools and power tools, • Ability to work on a team under the direction of senior engineers and managers, • Current, valid, and clean NYS driver’s license (7 years' clean driving record) to drive company vehicles, • OSHA 30 or 40 training a plus New job specific skills will be taught with on-the-job experience. Physical Requirements: • Prolonged periods standing, kneeling, bending, and climbing ladders or scaffolding, • Must be physically capable of pulling wires and cables through conduits, • Must be able to lift up to 30 pounds at a time The customers we support include large and small commercial facilities, hotels, hospitals, multi-family residential, schools and many others. Work is primarily in the NY City Metropolitan area, and we are actively developing customers in other cities. Salary Range $17 - $20/hour Company Car for Work Purposes Competitive Benefits Package • Health insurance (medical, dental, vision), • PTO program and paid holidays, • 401K, • EAP, • ESOP (Employee Stock Ownership Plan) Our Values: • Our People, • Relationships, • Innovation, • Sustainability, • Growth, • Determination About Us We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job DescriptionDescription: Company Introduction: Lighthouse Restoration & Construction is a full-service disaster cleanup and property damage restoration company. We specialize in fire, water, wind, mold, and other disaster property recovery services in the Farmingdale, NY area. Lighthouse Restoration & Construction is privately owned and locally operated in Farmingdale, NY. We are seeking a dedicated and skilled Restoration Technician to join our team. The ideal candidate will play a crucial role in restoring properties affected by various types of damage, including water, fire, and asbestos. This position requires a hands-on approach to effectively utilize tools and techniques necessary for restoration while ensuring high-quality service and customer satisfaction. Duties • Perform water damage restoration tasks, including extraction, drying, and dehumidification., • Execute fire restoration processes, including smoke damage cleanup and structural repairs., • Utilize hand tools and power tools safely and effectively for various restoration projects., • Conduct carpet cleaning and other cleaning services as needed to restore properties to their original condition., • Assist in asbestos abatement procedures while adhering to safety regulations., • Maintain a clean work environment and ensure all equipment is properly stored and maintained., • Collaborate with team members to assess damage and develop restoration plans tailored to each project., • Previous experience in the restoration industry is preferred but not mandatory; we are willing to train the right candidate., • Familiarity with hand tools, power tools, and cleaning equipment is essential., • Knowledge of water damage restoration techniques, fire restoration processes, and asbestos abatement practices is a plus., • Strong attention to detail with a commitment to delivering clean and high-quality results., • Ability to work independently as well as part of a team in a fast-paced environment.

Job ID: 554165590 Location: 1111 Stewart Avenue, Bethpage, NY 11714 Lightpath is one of the largest competitive local exchange carriers in the tri-state area. Weown and operate our infrastructure "from the ground up" by deploying over 20,000 route miles connecting 13,500 on-net/LIT buildings. With a strong portfolio of cutting edge solutions for Internet, WAN, Voice, SD-WAN, Security & Cloud services, we enable Enterprise customers of all sizes the ability to react to new challenges while developing best practices for the future. With Lightpath's continued focus on network excellence and a "customer first" service commitment, we are building a workforce of the best talent that will meet the needs of our customers and reflect the diverse communities we serve. Job Summary The Senior Optical Network Engineer is a senior technical resource responsible for the deployment, implementation, maintenance, and operational reliability of Lightpath's Metro and Regional Optical Transport Networks. This role focuses on executing network augmentations, integrating optical systems, supporting field operations, resolving complex optical issues, leading migration activities, and ensuring the stability and performance of Lightpath's DWDM/ROADM infrastructure. The Senior Engineer partners closely with Planning, MPLS Engineering, Field Operations, Product, and NMC teams to execute approved designs, maintain network health, standardize configurations, and support large-scale deployment initiatives. They provide Tier-3 escalation support, oversee high-risk change windows, and ensure optical platforms operate at peak performance in alignment with established design and architectural standards. Responsibilities • Execute implementation of approved Metro, Regional, and Access DWDM/ROADM builds and augmentations., • Integrate and turn up optical equipment including transponders, amplifiers, ROADMs, and associated line systems., • Validate power levels, OSNR, channel performance, and spectral configuration during activation., • Commission Ciena 6500/RLS and other approved Lightpath optical platforms., • Coordinate with Field Operations for on-site tasks and ensure work aligns with engineering standards., • Serve as Tier-3 escalation for complex optical impairments, hardware failures, or service-impacting events., • Troubleshoot issues such as low OSNR, span degradation, EDFA/Raman anomalies, dispersion issues, or fiber faults., • Analyze OTDR traces, power measurements, OSA data, BERT results, and fiber characterization reports., • Perform detailed root-cause analysis (RCA) and drive corrective/preventive actions., • Support after-hours maintenance windows as a senior escalation resource., • Create, refine, and enforce Method of Procedures (MOPs) for augmentations, maintenance, and migrations., • Develop operational runbooks, installation guides, and troubleshooting playbooks., • Ensure all work complies with Lightpath engineering standards and change management processes., • Lead multi-site implementation efforts and serve as the senior technical contact across internal teams., • Coordinate with Planning teams to ensure all implementation details aligned with approved design packages., • Work closely with Circuit Design to support provisioning and ensure clean handoff of backbone builds., • Support MPLS, IP, and Capacity Management teams with optical-related dependencies during deployments., • Maintain active engagement with equipment vendors on operational defects, escalation cases, and field issues., • Review and validate vendor software releases, patches, and recommended upgrade paths., • Participate in lab testing, system qualification, and operational acceptance of new hardware/software., • Track equipment health, running software versions, and field notices to ensure continued operational compliance., • Mentor junior engineers, field technicians, and NOC personnel on optical technologies and best practices., • Deliver operational training sessions on optical maintenance, troubleshooting, and platform behaviors., • Participate in cross-functional knowledge sharing across Engineering, Ops, and Planning groups. Qualifications • BS degree in Engineering or Telecommunications (or equivalent experience)., • 5+ Years of Telecommunication experience with strong optical transport background., • Extensive and demonstrated understanding of optical theory, transport technologies and the operation of optical transport systems (including SONET, SDH, DWDM (ROADM and OADM)., • Knowledge and working experience with Ciena 6500 required. Coriant/Tellabs 7100, Adva Optidriver/Fiberdriver, Smartoptics transport shelves is preferred., • Solid optical troubleshooting skills using OTDR, OSA, BERT and optical power meters., • Experience with field-based work in POPs, carrier hotels, data centers and Central Office environments., • Hands-on experience with major optical vendor platforms (Ciena preferred)., • Proven experience performing network maintenance and executing MOPs., • Strong troubleshooting and problem-solving skills., • Experience with Netcracker preferred or similar Planning and Provisioning tool., • Knowledge and working experience with Ciena Navigator, Adva FSP NM & Tellabs Network Management System (TNMS)., • TL1 and/or Element Management System experience., • Strong working knowledge of Microsoft Office, Streets & Trips, Visio & various operational Support Systems for internal and external presentations and complex network schematics., • Familiarity with Network Management/DCN design., • Experience supporting carrier, enterprise, or hyperscaler optical networks., • Scripting or automation experience is a plus. Soft skills • Ability to work and learn independently., • Ability to grasp abstract concepts and adapt to technology evolutions., • Excellent oral and written communication skills., • Strong project management skills., • Strong decision making and leadership skills., • Ability to build and foster collaborative relationships., • Strong problem-solving skills, self-managed and the ability to multitask., • Ability to influence others to meet desired goals. Lightpath collects personal information about its applicants for employment that may include personal identifiers, professional or employment related information, photos, education information and/or protected classifications under federal and state law. This information is collected for employment purposes, including identification, work authorization, FCRA-compliant background screening, human resource administration and compliance with federal, state and local law. This position is identified as being performed in/or reporting to company operations in New York State. The pay range at the time of posting in the specified locations is $130,000- $160,000/year. Pay ranges are supplied in compliance with New York State law. Pay is competitive and based on a number of job-related factors, including skills and experience.

ABM Industries - - Responsibilities: Clean and maintain buildings/facilities; Follows procedures for the use of chemical cleaners and power equipment in order to prevent damage to floors and fixtures; Notify Manager concerning the need for minor or major repairs or additions to building operating s

Power-Flo Technologies, an ever growing group of companies headquartered in New Hyde Park, is seeking a Driver to join our warehouse team. Current, valid, and clean NYS driver's license to operate company box trucks and vehicles (7 years clean driving record).

Job Description Location: On-Site in Garden City Park & Field Work Schedule: Full-Time. Monday - Friday, 7 AM - 3:30 PM Pay: $17 - $20/hour Benefits: Health insurance (medical, dental, vision), EAP, PTO, paid holidays, 401K, ESOP (Employee Stock Ownership Plan) Power-Flo Technologies is seeking a Laborer to join our Pump and Motor Repair Team. What You’ll Do: • Assist mechanics with cleaning, painting, testing, and disassembling AC/DC motors & pumps., • Clean parts, • Maintain the tool areas, • Help troubleshoot & repair pumps, motors, and fans in-shop and on-site., • Use power tools, hand tools, and a multimeter for repairs., • Assist with the replacing & wiring of electric motors at job sites.What You Need:, • Mechanical/technical skills & experience with hand/power tools., • Ability to troubleshoot electrical & mechanical systems., • Basic PC knowledge & strong communication skills., • Valid driver's license (clean for 7 years).Physical Requirements:, • Stand for up to 8 hours, lift 50 lbs, and work on ladders/platforms., • Exposure to dust, loud noise, and temperature changes., • This position may require standing, stooping, bending, kneeling, crouching and/or reaching, • Good hand-eye coordination and fine motor skills may be required for hand tools, power tools, and other machinery Join our team and build your skills in a hands-on environment! About Us We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description Power-Flo Technologies, an ever growing group of companies headquartered in New Hyde Park, is seeking a box truck driver to join our warehouse team. Previous box truck experience required. CDL not required. Full Time. Monday - Friday, 6 AM - 2:30 PM. Route: We deliver on Long Island and in the 5 boroughs. Salary Range: $18 - $21/hour Competitive Benefits Package • Health insurance (medical, dental, vision), • PTO program and paid holidays, • 401K Day to Day of a Box Truck Driver : • Pull and stage orders for shipment, • Safely and efficiently pick up and deliver orders, • Load, unload, prepare, inspect, and operate delivery vehicle, • Plan delivery route to maximize efficiency and productivity for the day, • Complete delivery and pickup paperwork promptly and accurately, gathering the appropriate signatures and acknowledgements, • Obey all traffic laws and parking regulations, • Perform basic warehouse work to include, removing sold parts from stock, placing received parts on shelves, processing items for shipment, receiving, organizing etc. Box Truck Driver Qualifications : • Current, valid, and clean NYS driver’s license to operate company box trucks and vehicles (7 years clean driving record), • Box Truck (16-18 ft or larger) and/or Flatbed truck experience required. No CDL required., • Ability to obtain & maintain DOT certification, • Ability to lift 50 pounds and push or pull over 100 pounds, • Comfortable using a smart phone and computer, • Ability to follow processes, procedures, and policies, • Ability to work well independently, have a can-do attitude, and be willing to learn, • Ability to communicate in verbal and written from with functional English skills, • Excellent organizational and time management skills, • Knowledge of Nassau, Suffolk and the 5 Boroughs We hire for a variety of warehouse positions: associates, packers, shippers, receivers, and drivers. Classification: Regular, Full Time FLSA Status: Non-Exempt Reports to: Warehouse Manager About Us We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job DescriptionDescription: The Driver role performs dedicated pick-up and delivery in the local area for assigned routes. This position requires a Class A license, 2 years minimum experience operating a tractor/trailer (53' dry van, High Cube, Flatbed), clean DMV (no major at-fault accidents or speeding in commercial vehicles) and current medical card, city driving experience in all weather conditions. Material handling is required. This is a fast-paced, dedicated on-time delivery environment - a sense of urgency and commitment to customer service is a must. Requirements: Responsibilities and Duties: • Keep paperwork and cargo supply organized to facilitate a smooth workflow., • Responsible for occasional route coverage to absence of other drivers., • Load, secure, inspect and fuel before and as necessary during your shift., • Immediately report any problems during route to immediate supervisor., • Assist in helping other drivers during load outs to maintain a safe work environment., • Keep assigned Truck and work area at Terminal organized and clean for safety and efficiency., • Tarp, Strap and Chain (when required) all loads to Federal Cargo Requirements., • Sense of urgency and commitment to customer service., • Ensures that safety requirements are followed by drivers at all times., • Advanced knowledge of DOT rules and regulations, • Route planning for optimal driver and vehicle utilization., • Maintains clear and accurate records and logs., • High school diploma or equivalent, • Strong math & writing skills, • Customer and Quality focused, • Intermediate computer skills, • 2-4 years of experience in the transportation field or any other related industry, • LEAN understanding with the ability to fully execute 5s and 7s, • Understanding of logistics, shipping, receiving and transportation, • Excellent time management, • Great communication and soft skills, • High Sense of accuracy, • Knowledge of inventory control, • Assertive; being able to meet high volume demand, • Able to collaborate with all parties necessary to achieve goals, • Knowledge of handheld RF equipment a plus, • Adherence to all OTT Safety, Quality, ISO, and HR policies and standards

Job DescriptionAt Power-Flo Technologies, you’ll be part of a team that designs and delivers complete switchgear solutions. We are looking for you to join our collaborative team as an Electrical Design Engineer. This is a full-time, on-site role. Primary Function: Responsible for design of electrical panels and schematics to meet customer requirements. Provide panel jobs quotes and estimates. Act as project management on panel jobs. Assist with customer technical support. Post-sales support on core products. Design Engineer Essential Responsibilities • Review engineered contract drawings and specifications for the design of electrical control panels, • Design and layout of electrical panels using AutoCAD Electrical, • Ensure that all panels are being designed and constructed to UL Standards, • Creating Bill of Materials for the sales engineer team, • Create testing procedures for specific projects to be used by shop personnel, • Determine parameters to program variable frequency drives and soft starters, • Provide technical support on the products we manufacture Design Engineer Necessary Qualifications • 3 years+ experience in the design of electrical systems required, • Ability to use AutoCAD for electrical design work., • Hold a degree in the engineering field., • Must have a valid and clean driver's license to travel to job sites and other branches as needed. Design Engineer Physical Requirements • Some Minor Lifting and Moving of Parts and Equipment Salary commensurate with experience in the design of electrical systems (Range from $70,000 - $145,000 annually) Benefits Package • Medical, Dental, Vision, • PTO Program and Paid Holidays, • 401K, • EAP, • ESOP (Employee Stock Ownership Plan) We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description Power-Flo Technologies, an ever growing group of companies headquartered in New Hyde Park, is seeking a Driver to join our warehouse team. Previous box truck experience required. CDL not required. Vehicles: 16 - 18 foot box trucks and sprinter vans. Full Time. Monday - Friday, 6 AM - 2:30 PM. Route: We deliver on Long Island and in the 5 boroughs. Salary Range: $18 - $21/hour Competitive Benefits Package • Health insurance (medical, dental, vision), • PTO program and paid holidays, • 401K Day to Day of a Driver : • Pull and stage orders for shipment, • Safely and efficiently pick up and deliver orders, • Load, unload, prepare, inspect, and operate delivery vehicle, • Plan delivery route to maximize efficiency and productivity for the day, • Complete delivery and pickup paperwork promptly and accurately, gathering the appropriate signatures and acknowledgements, • Obey all traffic laws and parking regulations, • Perform basic warehouse work to include, removing sold parts from stock, placing received parts on shelves, processing items for shipment, receiving, organizing etc. Driver Qualifications : • Current, valid, and clean NYS driver’s license to operate company box trucks and vehicles (7 years clean driving record), • Box Truck (16-18 ft or larger) and/or Flatbed truck experience required. No CDL required., • Ability to obtain & maintain DOT certification, • Ability to lift 50 pounds and push or pull over 100 pounds, • Comfortable using a smart phone and computer, • Ability to follow processes, procedures, and policies, • Ability to work well independently, have a can-do attitude, and be willing to learn, • Ability to communicate in verbal and written from with functional English skills, • Excellent organizational and time management skills, • Knowledge of Nassau, Suffolk and the 5 Boroughs We hire for a variety of warehouse positions: associates, packers, shippers, receivers, and drivers. Classification: Regular, Full Time FLSA Status: Non-Exempt Reports to: Warehouse Manager About Us We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job DescriptionJob Title: Machine Operator (Press Brakes, Shear Machine, CNC Turret Punch Press) Company: Power-Flo Technologies Location: New Hyde Park, NY Job Type: Full-Time Reports To: Shop Manager Power-Flo Technologies is seeking an experienced Machine Operator to operate and maintain our press brakes, shear machine, and CNC turret punch press. The ideal candidate will have a strong background in metal fabrication and the ability to produce precise and accurate parts while adhering to PFT’s safety and quality standards. Schedule: This is a full-time position. Monday – Friday, 7 AM – 3:30 PM. Salary Range: $18 - $27/hour Benefits: Health insurance (medical, dental, vision), 401K, EAP, ESOP (Employee Stock Ownership Plan), PTO Program and Paid Holidays Essential Responsibilities • Set up and operate the press brakes, shear, and CNC turret punch press to produce parts according to specifications, • Monitor machine operation making adjustments as needed to ensure quality and efficiency, • Adhere to safety protocols at all times, • Establish and follow maintenance schedules for shop equipment, • Provide technical expertise and troubleshoot machine issues as needed, • Maintain a neat and orderly work area at all times, • Organize and maintain shop tools and equipment, • Willing and able to work OT as required Necessary Qualifications • Previous machine operating experience in a manufacturing setting, • Ability to read mechanical prints and schematics, • Ability to work both independently and in a team setting, • Basic knowledge regarding use of a PC, • Mechanical aptitude, • Attention to detail and commitment to producing high quality work, • Valid and clean NYS driver's license to operate company vehicles as needed Physical Requirements • Ability to Stand for 8 Hours, • Ability to lift 50 pounds, • Ability to work on elevated platforms, • Ability to climb ladders We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job DescriptionDescription: The Driver role performs dedicated pick-up and delivery in the local area for assigned routes. This position requires a Class A license, 2 years minimum experience operating a tractor/trailer (53' dry van, High Cube, Flatbed), clean DMV (no major at-fault accidents or speeding in commercial vehicles) and current medical card, city driving experience in all weather conditions. Material handling is required. This is a fast-paced, dedicated on-time delivery environment - a sense of urgency and commitment to customer service is a must. Requirements: Responsibilities and Duties: • Keep paperwork and cargo supply organized to facilitate a smooth workflow., • Responsible for occasional route coverage to absence of other drivers., • Load, secure, inspect and fuel before and as necessary during your shift., • Immediately report any problems during route to immediate supervisor., • Assist in helping other drivers during load outs to maintain a safe work environment., • Keep assigned Truck and work area at Terminal organized and clean for safety and efficiency., • Tarp, Strap and Chain (when required) all loads to Federal Cargo Requirements., • Sense of urgency and commitment to customer service., • Ensures that safety requirements are followed by drivers at all times., • Advanced knowledge of DOT rules and regulations, • Route planning for optimal driver and vehicle utilization., • Maintains clear and accurate records and logs., • High school diploma or equivalent, • Strong math & writing skills, • Customer and Quality focused, • Intermediate computer skills, • 2-4 years of experience in the transportation field or any other related industry, • LEAN understanding with the ability to fully execute 5s and 7s, • Understanding of logistics, shipping, receiving and transportation, • Excellent time management, • Great communication and soft skills, • High Sense of accuracy, • Knowledge of inventory control, • Assertive; being able to meet high volume demand, • Able to collaborate with all parties necessary to achieve goals, • Knowledge of handheld RF equipment a plus, • Adherence to all OTT Safety, Quality, ISO, and HR policies and standards

Job Description Power-Flo Technologies is hiring an Entry Level Inside Sales Representative to write orders and guide our customers through product selection of our electrical supplies, electric motors, pumps, controls, power transmission equipment and HVAC controls. Salary Range: $18 - $28/hour (depending on direct industry experience) Benefits Package • Health insurance (medical, dental, vision), • PTO program and paid holidays, • EAP, • 401K, • ESOP (Employee Stock Ownership Plan) Responsibilities include but are not limited to the following: • Supporting outside sales staff by providing customers with proposals on their behalf., • Providing best in class customer service., • Providing product information and keeping regular vendor contact for various reasons i.e. expediting open orders., • Reaching out to customers on an as needed basis to inquire about potential future needs., • Will be up-selling customers who have called to place an order by suggesting additional products that could compliment their needs for the specific job that they are working on., • Working with credit department to inquire and help provide resolution to account financial status for customers. Requirements for the position include but are not limited to the following: • Must be able to handle a high call volume environment., • Must be committed to learning about our business and all the product lines, keeping up to date as well., • Excellent verbal and written communication skills., • Ability to remain professional and focused with customers on the phone and successfully conclude the call despite any challenges presented by the customer., • Must be a Self-motivated and sales driven individual., • Experience with our ERP System that is called Eclipse is a big plus., • Must be able to learn our Windows based and our text command-based ERP System., • 1 - 2 years of experience working with or for Electrical or HVAC contractors is highly preferred., • Valid and clean NYS driver's license to travel to training and to visit vendors (as needed). Physical Ability Requirements (with or without reasonable accommodation) • Ability to sit for prolonged periods of time, • Ability to utilize a computer keyboard, computer monitor, and telephone for prolonged periods of time Learn more about us here: Follow us on LinkedIn: About Us We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description BCforward is currently seeking a highly motivated Warehouse Associate / Production Associate for an opportunity at Hicksville, NY 11801! Position Title: Warehouse Associate / Production Associate Location: Hicksville, NY 11801 Anticipated Start Date: ASAP Please note this is the target date and it is subject to change. BCforward will send official notice ahead of a confirmed start date. Expected Duration: 2+ Months with the possibility of extension Job Type: Onsite Pay Range: $18.00/hr.- $19.00/hr. Please note that actual compensation may vary within this range due to factors such as location, experience, and job responsibilities, and does not encompass additional non-standard compensation (e.g., benefits, paid time off, per diem, etc.). Job Description: Summary / Objective Production Associate is responsible for taking direction from the supervisor in order to meet production demands while ensuring quality and safety standards are met. Percentage of Job/ Essential Job Functions • • Self-Reliant and able to accurately work under limited supervision • Attending area of transfer from filler to chiller., • Inform Supervisors and or Lead of any discrepancy on product information., • Transferring carts of production in and out of chillers and placing them orderly at the WIP area., • Orient product alignment in the Garvey table area, • Flip trays in chillers when needed., • Reworking product that is below specifications., • Keeping work area clean and organized, following the 5 S program., • Promoting a safe work environment at all times., • Follow HACCP principles and Good Manufacturing Practices. Comply with Food and Personal Safety Procedures, company Policies and regulations., • Other duties, as assigned including transferring to Kitchen area as needed., • Perform other duties as assigned Competencies (skills, knowledge and abilities) • 18 years or older • Ability to read, write, comprehend, follow verbal and written instructions and possess basic mathematical skills Minimum General Requirements • Frequent movement including walking, standing, bending/stooping, turning, twisting, pushing, pulling, raising arms, lifting, climbing and other active movements • Able to lift up to 50 lbs, • Performing duties while wearing personal protective equipment, • Able to work in noisy environments, • Working across temperature zones that may include cold and/or hot environments for extended periods and may include work in environments where dust is present Preferred Education and Experience • High School diploma or GED-equivalent, • Bilingual - Spanish Travel Required • N/A Other Duties • As assigned Company DescriptionAbout BCforward: Founded in 1998 on the idea that industry leaders needed a professional service, and workforce management expert, to fuel the development and execution of core business and technology strategies, BCforward is a Black-owned firm providing unique solutions supporting value capture and digital product delivery needs for organizations around the world. Headquartered in Indianapolis, IN with an Offshore Development Center in Hyderabad, India, BCforward’s 6,000 consultants support more than 225 clients globally. BCforward champions the power of human potential to help companies transform, accelerate, and scale. Guided by our core values of People-Centric, Optimism, Excellence, Diversity, and Accountability, our professionals have helped our clients achieve their strategic goals for more than 25 years. Our strong culture and clear values have enabled BCforward to become a market leader and best in class places to work. BCforward is an equal opportunity employer.About BCforward:\r\n\r\nFounded in 1998 on the idea that industry leaders needed a professional service, and workforce management expert, to fuel the development and execution of core business and technology strategies, BCforward is a Black-owned firm providing unique solutions supporting value capture and digital product delivery needs for organizations around the world. Headquartered in Indianapolis, IN with an Offshore Development Center in Hyderabad, India, BCforward’s 6,000 consultants support more than 225 clients globally.\r\n\r\nBCforward champions the power of human potential to help companies transform, accelerate, and scale. Guided by our core values of People-Centric, Optimism, Excellence, Diversity, and Accountability, our professionals have helped our clients achieve their strategic goals for more than 25 years. Our strong culture and clear values have enabled BCforward to become a market leader and best in class places to work.\r\n\r\nBCforward is an equal opportunity employer.

Job Description Ability to read, write, comprehend, follow verbal and written instructions, and possess basic mathematical skills • Ability to do basic arithmetic and understand weights and measurements., • Check equipment for proper sanitation., • Complete checklist and reports., • Add the ingredients to the scheduled kettle., • Wash kettles between kettle rotations as needed., • Check all equipment (flexicon, scales) for proper operation., • Formulate batches to meet the procedure specifications., • Pre-weigh the ingredients according to schedule., • Inspect raw materials before using for quality and sanitary specifications., • Record batch information on the provided forms (lot codes, quality, time, initials)., • Keep all ingredients covered, sealed and identified., • Prepare workstation for operation and maintain a clean and organized work area., • Follow HACCP principles and Good Manufacturing Practices. Comply with Food and Personal Safety Procedures, company Policies and regulations, • Frequent movement including walking, standing, bending/stooping, turning, twisting, pushing, pulling, raising arms, lifting, climbing and other active movements., • Lifting up to 50 pounds., • Performing duties while wearing personal protective equipment., • Working across temperature zones that may include cold and/or hot environments for extended periods and may include work in environments where dust is present. Company DescriptionAbout BCforward: Founded in 1998 on the idea that industry leaders needed a professional service, and workforce management expert, to fuel the development and execution of core business and technology strategies, BCforward is a Black-owned firm providing unique solutions supporting value capture and digital product delivery needs for organizations around the world. Headquartered in Indianapolis, IN with an Offshore Development Center in Hyderabad, India, BCforward’s 6,000 consultants support more than 225 clients globally. BCforward champions the power of human potential to help companies transform, accelerate, and scale. Guided by our core values of People-Centric, Optimism, Excellence, Diversity, and Accountability, our professionals have helped our clients achieve their strategic goals for more than 25 years. Our strong culture and clear values have enabled BCforward to become a market leader and best in class places to work. BCforward is an equal opportunity employer.About BCforward:\r\n\r\nFounded in 1998 on the idea that industry leaders needed a professional service, and workforce management expert, to fuel the development and execution of core business and technology strategies, BCforward is a Black-owned firm providing unique solutions supporting value capture and digital product delivery needs for organizations around the world. Headquartered in Indianapolis, IN with an Offshore Development Center in Hyderabad, India, BCforward’s 6,000 consultants support more than 225 clients globally.\r\n\r\nBCforward champions the power of human potential to help companies transform, accelerate, and scale. Guided by our core values of People-Centric, Optimism, Excellence, Diversity, and Accountability, our professionals have helped our clients achieve their strategic goals for more than 25 years. Our strong culture and clear values have enabled BCforward to become a market leader and best in class places to work.\r\n\r\nBCforward is an equal opportunity employer.

Job Description Location: On-Site in Garden City Park & Field Work Pay: $26 - $45/hour (commensurate with direct experience) Schedule: Full-Time. Monday - Friday, 7 AM - 3:30 PM with overtime opportunities. Benefits: Health insurance (medical, dental, vision), EAP, PTO, paid holidays, 401K, ESOP (Employee Stock Ownership Plan) Power-Flo Technologies' Pump and Motor Repair Shop in New Hyde Park, NY is seeking an experienced Mechanic to join our team. Mechanic Responsibilities Include : • Assess machinery to accurately diagnose and repair issues, • Liaise with clients to determine their requirements and communicate defects or problems, • Provide routine inspections of equipment and inform clients of any issues, • Keep an accurate log of all work performed, • Install replacement bearings, seals, shafts, and gaskets, • Replace and wire electric motors, • Adhere to company work safety policies, • Complete jobs both in our shop and at job sites, • Respond to work orders for troubleshooting, repair and feedback to Supervisor, • Mechanic will be responsible to make emergency repairs within area of knowledge and responsibility, • Familiarity with hand tools, power tools, disassembly, multimeter, etc. Mechanic Qualifications : • 5+ years experience in pump mechanics, • Knowledge of pump systems and electric motors, • Ability to work both with a team and independently, • A valid and clean driver's license to operate company vehicles We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description Our New Hyde Park shop is looking for a Machinist (manual lathe) to join the team. You will perform typical duties of a traditional manual machinist working with horizontal lathes, vertical milling machine, general machine shop equipment: band saws, Bridgeport drill presses, grinders, as well as some welding. Monday - Friday, 7 AM - 3:30 PM. Machinist Essential Responsibilities • Set up and operate conventional lathes, mills, balancing equipment, and commutator profiler, • Ability to machine housings, shafts, keyways, and sleeves, • Must be familiar with common industry tolerances and fits for motor repair, • Fabricate products to meet established quality standards and the requirements of our customers, • Establish and follow maintenance schedules for shop equipment, • Provide technical expertise as needed, • Maintain a neat and orderly work area at all times, • Organize and maintain personal and shop tools and equipment, • Willing and able to work OT as required Machinist Necessary Qualifications • Manual Lathe experience required, • 5 years' mechanical assembly and disassembly experience, • Ability to read mechanical prints and schematics, • Ability to work independently and in a team setting, • Basic knowledge regarding use of a PC, • Competent with the use of electrical test equipment, i.e. Multi meter, shop tools, hand tools, pneumatic tools, hoists, etc., • Mechanical aptitude and basic understanding of electrical theory required, • Valid and clean NYS driver's license to operate company vehicles as needed Physical Requirements • Ability to Stand for 8 Hours, • Ability to lift 50 pounds, • Ability to work on elevated platforms, • Ability to climb ladders, • This position may require standing, stooping, bending, kneeling, crouching and/or reaching, • You may be exposed to dust, loud noises, and hot and cold conditions Salary Commensurate with Experience (Range between $22 - $38/hour) Benefits • Health insurance (medical, dental, vision), • 401K, • PTO Program and Paid Holidays, • EAP, • ESOP (Employee Stock Ownership Plan) We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS. The Power-Flo Technologies family of companies include United Electric Power, Aetna Electric, Long Island Electrical Distributors, Electric Switchboard Solutions, Misa Plumbing, Axis NJ LLC, Power-Flo Pumps and Systems, US Energy Group, Dittman and Greer, AAI, United-Richter, Twinco, Nassor Electric

Job Description We are currently seeking an experienced backend developer with 3+ years of experience and expertise in supporting and creating the backend infrastructure for a React application. Your primary responsibility will be to architect and develop the backend systems that power our React app, while collaborating with frontend developers and other team members. Problem-solving skills and a strong understanding of REST APIs using frameworks such as Spring Java, [website], or Python are essential for this role. We value individuals who possess excellent teamwork skills and have a track record of delivering high-quality solutions. Responsibilities • Collaborate with the development team to support and enhance the backend infrastructure of our React application., • Design, build, and maintain efficient backend systems that align with the requirements of the React app., • Implement REST APIs and integrate them seamlessly with the frontend components., • Ensure optimal performance and scalability of the backend systems., • Write clean and well-documented code following best practices., • Develop and execute unit and integration tests to ensure the reliability of the backend functionality., • Collaborate with frontend developers to integrate backend services with the React app., • Participate in agile development processes, including sprint planning, retrospectives, and daily standups., • Work with modern tools including Trello, Slack, GitHub, GitLab, Google Docs, etc. Requirements • Several years of professional experience as a backend developer, preferably working on web applications., • Proficiency in building RESTful APIs using frameworks like Spring Java, [website], or Python., • Experience with database management systems (e.g., MySQL, PostgreSQL, MongoDB) and writing efficient SQL or NoSQL queries., • Familiarity with frontend technologies like React and an understanding of how the frontend interacts with backend systems., • Strong problem-solving skills and the ability to troubleshoot and resolve complex backend issues., • Familiarity with version control systems (e.g., Git) and collaborative development workflows., • Excellent teamwork and communication skills to collaborate effectively with cross-functional teams., • A proactive and detail-oriented approach to development, ensuring high code quality and adherence to project requirements. Job Type: Full-time Schedule: • Evening shift, • Monday to Friday, • Weekend availability

Job DescriptionBenefits: • Training & development, • Bonus based on performance, • Work indoors and outdoors in a variety of settings, enjoy the variety while staying active!, • Money and opportunity to make more. Starting between $18-20 per hour with potential for tips, commissions and overtime. Some Shine Crew leaders make up to $60,000 a year! You decide how much you can make!, • Work comfortably and casually. Shine t-shirts, sweatshirts and polo shirts are all provided to you for free. And we provide all the equipment youll need too!, • Paid training learn a valuable trade, advancing your skills, and get paid while doing so. Even if you dont have experience, it doesnt matter well train you!, • Vehicles are provided for you, so no using your own gas., • Each morning, youll meet with the rest of the team to understand the days game plan., • Youll drive one of our Shine vehicles to various customers homes or businesses (typically with another Shine team member) throughout the day and perform our services specific to that customers needs., • Youll call upcoming customers on your way to the job alerting them that youre on the way., • Youll meet customers face to face (if theyre home) before your crew begins its work to ensure were meeting the customers expectations on the job that day., • Upon inspection, you may suggest other services the customer may consider that you feel may be appropriate., • When the work is complete, youll complete a post-job inspection and meet again with the customer (if theyre home) to review the work to their satisfaction., • Youll accept and process the customers payment through our mobile payment technology completing the job., • Must like to work with people, • Must have reliable transportation, • Must be able to lift and carry a ladder up to 30 pounds., • Must not be afraid of heights, • Must be able to work outside, • Must want to work in a leadership capacity What We Do: We help homeowners and businesses Shine by providing these services; Window Washing Power Washing/Soft Washing Landscape Lighting Holiday Lighting We Need People Like YOU! Whether you have no experience at all or are already a window cleaning expert, we are looking for those who display strong character, work ethic, and are driven to be the best! Shine provides all the training, technology, support, and know-how to help you get it done. You bring a smile and a heart for learning and the Shine business will work very well for you. Our hope and intention is that our communities will see something different in us - something inspiring - something attracting. Let your light shine! Candidates with auto detailing, maid or maintenance, interior or exterior cleaning or landscaping/irrigation experience who enjoy working outside are encouraged to apply! Apply today!

Job Description Job Title: Material Handler The hours would be 9 am to 5:45 pm Job Purpose: The primary responsibility of this position is to transport assigned operational components, supplies and materials to requesting departments as well as transport full pallets of finished goods to storage and staging areas, loading and unloading trailer for delivery with a power and pallet jacks in a timely manner, observing all safety regulations and ensuring all cGMP and quality standards are met and to maintain the efficient flow of product through the production process. Individual will complete SAP needed transactions to request components for production and perform inventory adjustments. Major Accountability: Possesses required knowledge of SOPs, cGMPs, procedures, SAP entries and has the ability to explain the requirements to others as needed. Independently utilizes required Personal Protective Equipment and Safety Gear and performs a safety check on equipment to be used in the daily operations and ensure that all safety devices are functioning properly. Responsible for the movement of WIP materials within the warehouse. Communicates with Lead Operators and Management to maintain an efficient flow of material through the production process. Checks Compounding and Production schedules for batches to be run, transports materials and supplies to point of use staging area with the appropriate PIT equipment Responsible for the activities associated with the processing of finished goods for outbound deliveries. Keeps assigned areas clear and clean and transports unused components back to storage as required. Performs SAP inventory transactions, as required, to keep WIP inventory and Bin locations accurate. Responsible for overall housekeeping and organization of WIP Warehouse, including cycle counting, reconciliation and material destructions. Cleanliness of pallets/material containers, ensuring cleanliness and good condition of materials delivered to manufacturing. Also, maintain overall housekeeping of Production Staging Areas in Packaging, including cycle counting and reconciliation. At the end of shift, secure all equipment, perform general housekeeping duties and accurately complete all required paperwork. Performs other duties as assigned Adheres to all applicable procedures, cGMPs, company policies and any other quality or regulatory requirements. (For example: OSHA, DEA, FDA, EMEA, ANVISA, HS&E, etc.) Note: This position may require the labeling, packaging or movement of hazardous (flammable, corrosive, toxic, etc.) waste within the facility. If so, this employee would be trained under OSHAs HAZWOPER standard, 29 CFR 1910.120 as an 8-Hour first responder, 24-Hour incident commander, or a 40-Hour incident commander. In lieu of HAZWOPER training, the employee will receive training on the requirements of the Resource Conservation and Recovery Act pursuant to 40 CFR 265.16. All employees that have received the above mentioned training upon hire will receive annual refresher training that covers the OSHA HAZWOPER standard and the requirements of RCRA. Key Performance Indicators: Participate in Behavioural Based Safety Program (BBSP) by complying with all safety procedures and preventive measures (i.e., wearing Personal Protective Equipment (PPE), following lockout/tagout procedures). Ability to work independently and as part of a team in a fast in a fast-paced environment to meet the departments daily productivity and replenishment requirements. Demonstrated ability to manage multiple tasks simultaneously and be able to react to shifting priorities to meet business needs Demonstrated technical skills and knowledge of warehouse processing Strong team player; open to assisting with any task in order to get the work completed Quick learner; able to establish rapport and develop relationships Must be able to identify and recommend improvements. Ability to learn and apply new software multimedia applications Ability to lift up to 50 lbs. Ability to stand for extended periods of time Education/ Experience/ Background: Education: High School diploma or equivalent Languages: Fluent in written and spoken English Experience: 4 years of related experience

Job Description Ready to launch your career in accounting or finance? Join our team and gain hands-on experience in Accounts Payable. As part of the Power-Flo Technologies Accounts Payable team, you will play a key role in ensuring financial accuracy and operational efficiency by processing invoices, managing incoming bills, and maintaining compliance with company policies. This entry-level role supports daily AP operations—including utilities, inventory and product invoices, employee expense reimbursements—while gaining hands-on experience in a fast-paced environment. Other specific duties associated with this position include: • Manage incoming invoices, • Release payments/cut payments, • Request "Proof of Deliveries" from vendors, • Process direct shipments, • Ensure all payments are made in accordance with company policy, • Ensure all payments are sent on time, • Other duties upon request On the job training provided. No experience necessary. Monday to Friday, 8 AM - 5 PM. Full-time, on-site. Salary Range: $17 - $19/hour Competitive Benefits Package • Health insurance (medical, dental, vision), • PTO program and paid holidays, • 401K, • EAP, • Company provided life insurance (after 1 year), • ESOP (Employee Stock Ownership Plan) Entry Level Accounts Payable Clerks Basic Qualifications : • High School diploma or equivalent, • Strong basic mathematical skills, • Demonstrated ability to communicate clearly in both written and verbal formats, • Experience with Microsoft Office software, including Word and Excel, • Ability to work well in a team environment, • Valid and clean driver's license to make trips to the bank and post office as needed Physical Ability Requirements : • Ability to sit for prolonged periods of time (with accommodations upon request), • Ability to utilize a computer keyboard, computer monitor, adding machine, and telephone for prolonged periods of time (with accommodations upon request) Power-Flo Technologies is committed to being the premier provider of supplies, services, and solutions to the electrical, industrial, mechanical, and automation industries. About Us We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description Power-Flo Technologies’ Hi-Tech HVAC division is looking for a Regional Sales Manager to manage and oversee our HVAC wholesale vertical in NY and NJ. Responsibilities will include but shall not be limited to driving wholesale sales of HVAC products and projects, growth of sales via outside sales recruitment, development and retention of top-line manufacturers and key accounts, and key account relationship management. Additional responsibilities shall be – identifying sales opportunities, leveraging existing client relationships to sell entire product offering, develop proactive go to market strategy, and streamline quoting projects. We are a value added wholesaler selling parts, equipment, and custom designed control systems. Responsibilities include but are not limited to the following: • Manage daily operations and plan effective utilization of available resources including talent, • Direct and coordinate activities involving sales of manufactured products, control system design, services, commodities, and project sales, • Lead and manage a team of employees providing training, guidance, and support while fostering a positive and collaborative team culture, • Facilitate communication between team members and upper management, • Identify opportunities for improved efficiency and effectiveness, • Encourage innovation and process improvement within the department, • Communicate organizational goals, policies, and changes to the team, • Plan and direct staffing, training, and performance evaluations to develop and control sales and service programs, • Provide the best class service to clients and lead team with an effective go to market strategy Necessary Qualifications: • 5+ years of HVAC sales experience, • Product and vendor knowledge (or the ability to quickly learn it), • Demonstrated ability to communicate clearly and concisely in written and verbal formats, • Strong customer service orientation, • Two-year technical degree, • Must have a valid and clean driver's license to travel to vendors and customers, • Must be able to lean out Windows based and out text command-based ERP System, • Must be committed to learning our business and keep up to date on industry developments, • Must be self-motivated and sales driven individual., • Experienced being responsible for maintaining and exceeding quota’s/sales goals, • 40+ Hours a week., • Work out of New Hyde Park Office with travel to NJ once a month. Pay & Benefits: • Wage Commensurate with experience ($75,000-$100,000 annually), • Medical, dental, and vision, • PTO Program and Paid Holidays, • 401K, • EAP, • ESOP (Employee Stock Ownership Plan), • Bonus potential About Us We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description CERTIFIED SURGICAL TECHNOLOGIST WHO WE’RE LOOKING FOR Spectrum Vision Partners (“SVP”) and OCLI Vision (“OCLI”) work together to provide world class eye care to our patients to improve lives. SVP, the management services team, supports OCLI vision, one of the largest multi-specialty ophthalmology networks in the U.S. Our unique model and collaborative culture differentiate us in the marketplace and in our service to our patients. We build our culture one hire at a time. We want to build a great team that helps us focus on delivering exceptional eye care: the kind of team people want to be a part of, and the kind of team we can’t live without. We want to learn more about you and the kind of team culture you can help us create. We’re interested in your relevant skills and what you can do. We’re even more interested in your positive attitude and flexible mindset! We promote from within and offer medical, dental and vision coverage with a matching 401K and generous PTO! THE OPPORTUNITY AT HAND The Certified Surgical Technician (“CST”) is responsible for helping our O.R. to run smoothly. You will ensure we are prepared with the right instruments and tools at the right time. You will have a working knowledge of all operating room equipment including emergency equipment used in CPR. You will maintain a working knowledge of surgical instruments, and are responsible for their care, maintenance, and cleaning (sterilization included). You will recognize equipment malfunction and be able to do minor troubleshooting. You’ll become familiar with the surgical procedures and techniques of the Surgeons that you work with and will “gown and glove” them like a pro and assist with surgical procedures when needed. OUR EXPECTATIONS OF YOU • Daily: set up and prepares the autoclaves for use, ensuring that the core sterilizer and tabletop units are functioning properly and achieving proper run specifications, • Inspect O.R. suite daily to ensure that it meets ASC standards for cleanliness, • Initial morning scrub shall be for 3 to 5 minutes; routine scrub is required between cases, • Gowning and gloving shall be in accordance with acceptable sterile technique, • Set up phaco and retina equipment and instruments while patient is being positioned and prepped, • Maintains the instrument table, mayo stands, and instruments in proper order and condition during the case, • Assist with stocking of supplies, cleaning of equipment, and room “turn over” in a timely fashion and notify appropriate parties of anything that needs to be addressed, • Check IOL with Circulating Registered Nurse for proper style, model, and power, • Assist the Circulating R.N. in “closing” the O.R. The O.R. should be left neat, clean, and ready for immediate use, • You may be asked to assist with direct patient care, from time to time, • Responsible for making and sterilizing packs, instrument trays, packaging and wrapping necessary instruments and items necessary for certain procedures, to ensure their sterility, • Responsible for end-of-week cleaning and maintenance of all inventory expiration dates, • Conduct lens inventory and report results to the Clinical Director or purchasing agent. Assures a complete consignment prior to the next day’s surgery WHAT YOU'LL NEED TO SUCCEED • Must have graduated from an accredited program for surgical techniques or supply evidence of equivalent practical experience, • Must have knowledge of sterilization techniques and their appropriate uses, • 1+ year working in an operating room environment, preferably as a surgical technician preferred, • Certification or training in ophthalmology surgical techniques preferred WHO WE ARE Our globally recognized healthcare team is comprised of some of the top minds in ocular medicine. Our senior management team has a combined 200 years of eye industry experience collaborating with some of the most recognized practices in the nation. While our providers have the expertise to diagnose and treat complex ocular, oculoplastic, and retinal conditions, we’re also uniquely qualified to provide care for our patients from childhood through adulthood. We build relationships with our patients that last a lifetime. With nearly 1,400 employees, we support over 50 clinic locations, five state-licensed ambulatory surgery centers, and over 110 surgeons, doctors, and other medical professionals. Our brands include OCLI Vision, Island Eye Surgi-center, New Vision Cataract Center, AIO, and others. At Spectrum Vision Partners we know that cultivating diversity and fostering an inclusive work environment is critical to our impact and success. We create an environment where no individual is advantaged or disadvantaged because of their background. We offer equal opportunity employment regardless of race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability status, age, marital status, or protected veteran status. With a commitment to maintaining a bias-free environment in which harassment is prohibited, we respect cultural diversity and comply with the laws of the places in which we operate. We expect our business partners, suppliers, clients, and all our team members to uphold these commitments.

Job Description Job Title: CNC Operator – 1st Shift Location: Garden City, NY Position Summary We are seeking a skilled CNC Operator to set up and operate CNC and conventional machining equipment to manufacture precision aerospace components. The ideal candidate will have strong experience working to tight tolerances and interpreting technical documentation. Key Responsibilities * Set up and operate vertical and/or horizontal CNC milling machines * Set up and run conventional milling machines * Machine detailed parts and final assemblies using engineering drawings and method sheets * Utilize fixtures and drill jigs to ensure accuracy and consistency * Perform first-piece inspections to verify conformance to specifications * Maintain tight tolerances of up to ±0.0005 * Edit CNC programs as needed to optimize performance and accuracy * Follow all work instructions, setups, and safety procedures * Perform additional duties as assigned Qualifications * High School Diploma or GED required * Minimum of 5 years of CNC and conventional machining experience * Ability to read and interpret blueprints and technical drawings * Experience with first-piece inspection processes * Strong understanding of machining methods, setups, and tooling * Ability to edit CNC programs Physical Requirements * Ability to lift up to 35 lbs * Ability to stand for extended periods and perform repetitive tasks Pay Details: $26.00 to $35.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Company DescriptionNow Hiring – Be part of the future of electric vehicles! The LGES‐HONDA Joint Venture is bringing the power! A major transformation is happening in the auto industry, and we are leading the way. Established in 2023, we manufacture high‐quality lithium‐ion EV batteries and storage solutions—building tomorrow’s clean‐energy future, today. We’re committed to creating a workplace where every associate is valued, supported, and empowered. If you’re ready to help shape the next generation of electric vehicles, we want you on our team!Now Hiring – Be part of the future of electric vehicles!\r\nThe LGES‐HONDA Joint Venture is bringing the power! A major transformation is happening in the auto industry, and we are leading the way. Established in 2023, we manufacture high‐quality lithium‐ion EV batteries and storage solutions—building tomorrow’s clean‐energy future, today.\r\nWe’re committed to creating a workplace where every associate is valued, supported, and empowered. If you’re ready to help shape the next generation of electric vehicles, we want you on our team!

Job Description Power-Flo Technologies is the premiere provider of supplies, services, and solutions to the electrical, industrial, mechanical, and automation industries. We are now hiring an Electrical and Lighting Sales Manager to lead our New Hyde Park team. As the Electrical and Lighting Sales Manager, you will lead and grow electrical and industrial sales across the Long Island and NYC region by building strong customer relationships, developing high-performing sales teams, and driving strategic growth. Essential Responsibilities • Own regional electrical, lighting, and industrial sales performance, with accountability for revenue growth and profitability, • Lead a high-performing inside sales team through coaching, performance management, and professional growth, • Build and maintain relationships with key customers and strategic accounts across the region, • Develop and maintain vendor relationships, • Collaborate with branch leadership, operations, and marketing to ensure alignment across sales execution, messaging, and customer experience, • Analyze performance metrics, pipeline health, and market trends to forecast results and adjust strategy as needed, • Represent the company at industry events and customer meetings To be considered for this role, you must possess: • Proven experience leading sales teams in the electrical, lighting, industrial, and/or power distribution industry, • Track record of driving revenue growth and leading high-performing sales teams, • Proficiency with Microsoft Office, • Experience with ERP system Epicor Solar Eclipse a plus, • Excellent verbal and written communication skills, • Valid and clean driver’s license Expected salary range: $120,000 - $150,000 base plus bonus eligibility Benefits include: • Medical, dental, and vision, • PTO Program and Paid Holidays, • 401K, • EAP, • ESOP (Employee Stock Ownership Plan) Learn more about us: Follow us on LinkedIn: We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description As an Entry Level Purchasing Associate, you will ensure efficient procurement, inventory accuracy, and cost control by managing supplier relationships and coordinating with internal teams to support seamless operations. Power-Flo Technologies is committed to being the premier provider of supplies, services, and solutions to the electrical, industrial, mechanical, and automation industries. This is a full-time, on-site role. On the job training provided. No experience necessary. Entry Level Purchasing Associate Responsibilities: • Verify purchase requisitions by comparing requested items to the master list and clarifying discrepancies, • Forward available inventory items by confirming stock and coordinating delivery, • Prepare purchase orders by verifying specifications and pricing, • Obtain purchased items by issuing orders to suppliers and monitoring and expediting deliveries, • Verify receipt of items by matching shipments to purchase orders and resolving discrepancies with suppliers, • Authorize payment for purchases by forwarding receiving documentation to Accounts Payable, • Maintain organized purchasing records by sorting and filing documentation, • Provide purchasing planning and control support by collecting, analyzing, and summarizing data and trends, • Adjust minimum and maximum stocking levels based on demand, • Maintain appropriate inventory levels, • Ensure accurate cost data for all purchased items, • Act as a liaison with Accounts Payable to resolve invoicing issues, vendor terms, and price discrepancies, • Coordinate with the Sales team on product specifications, lead times, and expected delivery dates Entry Level Purchasing Associate Qualifications: • Strong problem-solving and reconciliation skills, • Effective interpersonal and communication skills, • Ability to multitask with strong attention to detail and organizational skills, • Ability to work independently as well as in a team environment, • Proficiency with Microsoft Office, including Excel and Word, • Strong PC and data entry skills, • Valid and clean driver’s license for use of company vehicles as needed Physical Ability Requirements: • Ability to sit for prolonged periods of time (with accommodations upon request), • Ability to utilize a computer keyboard, computer monitor, adding machine, and telephone for prolonged periods of time (with accommodations upon request) Salary Range: $17 - $19/hour • Competitive Benefits Package, • Health Insurance (medical, dental, vision), • PTO program and paid holidays, • 401K, • EAP, • ESOP (Employee Stock Ownership Plan) Our Core Values • Our People, • Relationships, • Innovation, • Sustainability, • Growth, • Determination Learn more about us here: Follow us on LinkedIn: We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description Power-Flo Technologies is now hiring a full-time warehouse associate to join our New Hyde Park team. We are the premier provider of supplies, services, and solutions to the electrical, industrial, and automation industries- housing electrical, HVAC, and plumbing supplies. Full-Time. Monday - Friday. 9:30 AM - 6:30 PM. Salary Range: $17 - $20/hour Benefits: • Medical, Dental and Vision plans, • PTO Program, • Paid Holidays, • EAP, • ESOP (Employee Stock Ownership Plan), • 401K Key Responsibilities : • Perform basic warehouse work to include, removing sold parts from stock, placing received parts on shelves, processing items for shipment, receiving, driving (as needed), organizing etc., • Pull and stage orders for shipment, • Organize Inventory, • Cycle Count, • Support the shipping desk by preparing shipments, printing labels, coordinating outgoing packages, and ensuring accurate documentation and tracking, • Maintain a clean Driver's License to operate company vehicles, • Load, unload, prepare, inspect, and occasionally operate delivery vehicle (box trucks and vans), • Current, valid, and clean NYS driver’s license (7 years' clean driving record) to operate company vehicles as needed (no CDL required), • 1+ years of warehouse experience required, • Experience with cycle counting, consolidation, and inventory management, • Ability to obtain & maintain DOT certification, • Ability to lift 50 pounds and push or pull over 100 pounds, • Ability to follow processes, procedures, and policies, • Ability to work well independently and on a team, have a great attitude, and be willing to learn, • Ability to communicate in verbal and written from with functional English skills, • Excellent organizational and time management skills, • Forklift experience a plus, • Experience with UPS, DHL, and/or FedEx a plus, • Ability to work in a fast-paced warehouse environment with varying temperatures We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS. For this and other opportunities check out

Job Description Are you looking for an entry level opportunity in an office setting? Join our Purchasing Team where you will ensure efficient procurement, inventory accuracy, and cost control by managing supplier relationships and coordinating with internal teams to support seamless operations. Power-Flo Technologies is committed to being the premier provider of supplies, services, and solutions to the electrical, industrial, mechanical, and automation industries. This is a full-time, on-site role. No experience necessary. On the job training provided. Purchasing Clerk Responsibilities: • Verify purchase requisitions by comparing requested items to the master list and clarifying discrepancies, • Forward available inventory items by confirming stock and coordinating delivery, • Prepare purchase orders by verifying specifications and pricing, • Obtain purchased items by issuing orders to suppliers and monitoring and expediting deliveries, • Verify receipt of items by matching shipments to purchase orders and resolving discrepancies with suppliers, • Authorize payment for purchases by forwarding receiving documentation to Accounts Payable, • Maintain organized purchasing records by sorting and filing documentation, • Provide purchasing planning and control support by collecting, analyzing, and summarizing data and trends, • Adjust minimum and maximum stocking levels based on demand, • Maintain appropriate inventory levels, • Ensure accurate cost data for all purchased items, • Act as a liaison with Accounts Payable to resolve invoicing issues, vendor terms, and price discrepancies, • Coordinate with the Sales team on product specifications, lead times, and expected delivery dates Purchasing Clerk Qualifications: • Strong problem-solving and reconciliation skills, • Effective interpersonal and communication skills, • Ability to multitask with strong attention to detail and organizational skills, • Ability to work independently as well as in a team environment, • Proficiency with Microsoft Office, including Excel and Word, • Strong PC and data entry skills, • Valid and clean driver’s license for use of company vehicles as needed Physical Ability Requirements: • Ability to sit for prolonged periods of time (with accommodations upon request), • Ability to utilize a computer keyboard, computer monitor, adding machine, and telephone for prolonged periods of time (with accommodations upon request) Salary Range: $17 - $19/hour • Competitive Benefits Package, • Health Insurance (medical, dental, vision), • PTO program and paid holidays, • 401K, • EAP, • ESOP (Employee Stock Ownership Plan) Our Core Values • Our People, • Relationships, • Innovation, • Sustainability, • Growth, • Determination Learn more about us here: Follow us on LinkedIn: We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job DescriptionGreetings from Donato Technologies Inc. We have an immediate opening with my client. If you are looking for a new project, please send me a copy of your updated resumes Electrical Testing TechnicianLocation: Nassau County, NY (Remote with fieldwork as required) Employment Type: Full-Time About the Role We are seeking a highly skilled NETA III Electrical Testing Technician to join a leading electrical testing and maintenance services provider. The ideal candidate will have extensive hands-on experience with high, medium, and low-voltage systems, ensuring the safe and reliable performance of electrical equipment across a variety of client sites. This role is best suited for professionals who excel in technical diagnostics, field testing, and team leadership, while adhering to industry standards and safety protocols. Key Responsibilities • Electrical Testing & Diagnostics, • Perform advanced testing on electrical equipment including circuit breakers, transformers, switchgear, motors, PTs, CTs, and cables., • Utilize specialized testing equipment such as Doble power factor test sets, low resistance ohmmeters, VLF test sets, insulation resistance testers, CT ratio/saturation devices, DC hi-pot testers, TTR instruments, and primary/secondary injection tools., • Troubleshooting & Repairs, • Identify, analyze, and resolve electrical issues using schematics, manuals, wiring diagrams, and engineering input., • Recommend and oversee repairs or replacements to ensure optimal system performance., • Maintenance & Compliance, • Inspect, clean, and maintain electrical equipment in compliance with industry and NETA standards., • Conduct risk assessments and enforce OSHA and company safety protocols., • Project Management & Leadership, • Oversee field service projects, ensuring on-time and within-scope delivery., • Mentor junior technicians and support their technical growth., • Collaborate with engineers, project managers, and clients to align project execution with client needs., • Documentation & Reporting, • Maintain accurate records of test results, inspections, and service activities., • Prepare detailed reports to ensure client transparency and compliance. Qualifications • Associates or Bachelors degree in Electrical Engineering, Electrical Technology, or related field (or equivalent military/field experience)., • NETA Level III Certification (required); NETA Level IV preferred., • 57+ years of electrical testing and maintenance experience (480V750kV)., • Strong knowledge of switchgear, transformers, motors, PTs, CTs, and protective relays., • Proficiency in interpreting electrical drawings, schematics, and wiring diagrams., • Proven leadership skills with ability to mentor junior staff., • Excellent communication and report-writing skills., • Physical ability to climb ladders, work in field conditions, stand for long periods, and lift up to 70 lbs., • Valid drivers license with clean record., • Ability to pass pre-employment drug screen, background check, and physical/respiratory fit test., • Flexibility to work overtime when required. Compensation & Benefits • Competitive salary based on experience., • Medical and dental insurance., • 401(k) retirement plan., • Paid vacation, sick leave, and holidays., • Participation in Employee Stock Ownership Plan (ESOP)., • Career development, training, and growth opportunities. Pre-Employment Screening All candidates must pass a background check, drug screen, and may be required to complete a physical/respiratory fit test prior to employment. Jennifer Sampson Technical Recruiter ....................................................... DONATO TECHNOLOGIES, INC 12100 Ford Rd, #306, Dallas, TX 75234 Direct : (469)-342-0401 Email: Web:

Job Description Location: Field Work LI and NYC. Clock in and clock out in Garden City Park. Schedule: Full-Time. Monday - Friday, 7 AM - 3:30 PM with overtime opportunities. Pay: $26 - $45/hour (commensurate with direct experience) Benefits: Health insurance (medical, dental, vision), EAP, PTO, paid holidays, 401K, ESOP (Employee Stock Ownership Plan) Power-Flo Technologies' Pump and Motor Repair Shop in New Hyde Park, NY is seeking an experienced Field Mechanic to join our team. Field Mechanic Responsibilities Include : • Assess machinery to accurately diagnose and repair issues, • Liaise with clients to determine their requirements and communicate defects or problems, • Provide routine inspections of equipment and inform clients of any issues, • Keep an accurate log of all work performed, • Install replacement bearings, seals, shafts, and gaskets, • Replace and wire electric motors, • Adhere to company work safety policies, • Complete jobs both in our shop and at job sights, • Respond to work orders for troubleshooting, repair and feedback to Supervisor, • Mechanic will be responsible to make emergency repairs within area of knowledge and responsibility, • Familiarity with hand tools, power tools, disassembly, multimeter, etc. Field Mechanic Qualifications : • 5+ years' experience in pump mechanics, • Knowledge of pump systems and electric motors, • Ability to work both with a team and independently, • A valid and clean driver's license to operate company vehicles We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job DescriptionAbout E-J The E-J Group is active in all facets of electrical contracting, bringing experience, expertise, and a national reputation to projects that range in size up to more than $300 million. With over 4,000 employees across 31 offices, E-J delivers full-service electrical solutions for rail systems, transit facilities, office buildings, hospitals, power, renewable energy, clean energy, co-generation facilities, roadway and outdoor specialty work, airports, industrial facilities, data centers, chip plants, universities, sports stadiums, extra high voltage distribution, utility, and gas infrastructure. At E-J, three generations of family expertise have built an organization that combines practical knowledge with modern technological innovation, providing rapid and efficient solutions for today’s lighting, power, energy, and communication needs. E-J has over a 125-year reputation for integrity, quality, and exceptional service in the electrical field. To learn more, visit . Title/Role: Jr. Estimator Division: Major Projects – Long Island Location: Bethpage, NY Reporting to: Divisional Chief Estimator Position Summary E-J’s Junior Estimators are crucial in the pre-construction phase, providing accurate and competitive cost estimates for electrical projects across various industries. Your experience in estimating and pricing will help drive successful project bids to ensure the company’s continued growth and success in the dynamic Long Island market. Roles and Responsibilities • Review and analyze project plans & drawings, specifications, and other relevant documents to comprehensively understand the scope of work and project requirements, • Assist in preparing detailed and accurate cost estimates for electrical projects, encompassing labor, materials, equipment, subcontractor services, and other associated expenses, • Utilize industry-standard software and tools (McCormick, Bluebeam) to generate estimates, ensuring precision and consistency in the estimation process, • Account for factors such as market conditions, labor rates, and material costs, • Collaborate with the bid team to develop comprehensive bid proposals, ensuring compliance with client requirements and specifications, • Participate in bid meetings/leveling meetings and presentations, providing insights into the estimation process and the rationale behind pricing decisions, • Solicit and evaluate quotes from suppliers and subcontractors to secure competitive pricing for materials and services, • Develop and maintain strong relationships with vendors and subcontractors to get pricing and information back quicker and quality resources, • Stay updated with industry trends, advancements, and regulatory changes that may impact project costs or estimating techniques, • Share insights and best practices with the team to enhance overall estimating capabilitiesQualifications, • Bachelor’s degree in electrical engineering, construction management, or a related field preferred, • 1-3 years experience preferred, • Knowledge of electrical construction practices, materials, and methodologies, • Familiarity with industry-standard estimating software and tools (McCormick, Bluebeam), • Excellent analytical and mathematical skills with keen attention to detail, • Effective communication and interpersonal abilities to collaborate with internal teams, clients, vendors, and subcontractors, • Highly motivated team player, • Excellent communication skills, • Proficient in MS Office Suite and Outlook softwareAdvantages of Working at E-J, • Leading Electrical Contracting Organization Nationwide, • Oldest Family-Owned and Operated Electric Contractor since 1899, • Job training and mentorship, • Competitive compensation packages, • Comprehensive benefits, including medical, dental, and 401K plan, • Paid holidays and vacation, • Merit-Based Bonus, • Tuition Reimbursement ProgramSalary Range: $60k-$80k/year The E-J Group is an Equal Employment Opportunity Employer and ensures equal employment opportunity for all persons without discrimination on the basis of race, color, religion, sex, sexual orientation, national origin, age, disability, marital status, citizenship, or any other characteristic protected by law. #LI-PIN Powered by JazzHR PQNJch6u7d

Job Description Job Title: Machine Maintenance Engineer Manager 1st Shift Location: Garden City, NY, US, 11530 Position Summary: The Machine Maintenance Engineer Manager ensures safety is the top priority while supporting Production needs. This hands-on role oversees the installation, repair, and upkeep of facilities, equipment, and offices. The ideal candidate has detailed knowledge of manufacturing machines (CNC, Vacuum Braze Ovens, etc.) and excels at designing maintenance procedures, tracking budgets, performing inspections, and executing repairs. Supervisory Responsibilities: • Supervise and mentor employees in the maintenance department., • Train team members in equipment maintenance, safety procedures, and operational efficiency.Duties and Responsibilities:, • Maintain a safe and compliant work environment while meeting production needs., • Work independently or collaboratively with the team to complete tasks efficiently., • Perform routine inspections and maintenance across the production floor., • Monitor, troubleshoot, and repair production and process equipment., • Coordinate with contractors to obtain repair information, parts, and procedures., • Design and implement maintenance procedures; track budgets and expenses., • Facilitate property insurance audits and implement corrective actions as needed., • Negotiate contracts with external vendors for maintenance services., • Ensure operational efficiency of electrical, mechanical, and HVAC systems., • Maintain company facilities in a clean and hygienic condition., • Maintain, troubleshoot, disassemble, and repair production equipment safely., • Perform alignments, lubrication, coolant changes, and other routine machine maintenance., • Demonstrate versatility across multiple systems and trades.Electrical, HVAC, & Plumbing:, • Basic knowledge of electrical systems (DC and AC, 24V–480V)., • Ability to read, interpret, and modify electrical schematics and prints., • Experience with ladder logic, PLCs, VFDs, and instrumentation/control devices., • Familiarity with gas/oil heating systems, air handlers, condensers, and evaporators.Safety:, • Promote and enforce a safety-first culture on the production floor., • Knowledge of Lockout/Tagout, Arc Flash, Machine Guarding, HazCom, DOT, RCRA, and material handling.Leadership:, • Strong problem-solving, analytical, and decision-making skills., • Ability to manage multiple priorities in a fast-paced environment., • Demonstrated success leading, motivating, and coaching diverse teams., • Excellent written and verbal communication; able to interact effectively at all levels.Education and Experience:, • Bachelor’s degree required., • 5–10 years of experience in manufacturing maintenance or equivalent training., • Background in general maintenance of manufacturing machines and process equipment (automated systems, chillers, air compressors, hydraulics, pneumatics)., • Proficiency with hand and power tools., • Experience with MS Office preferred.Physical Requirements:, • Ability to lift 50 lbs., • Active role requiring standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing throughout the day., • Fine manipulation and repetitive motion may be required for some tasks. Pay Details: $120,000.00 to $140,000.00 per year Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Company DescriptionNow Hiring – Be part of the future of electric vehicles! The LGES‐HONDA Joint Venture is bringing the power! A major transformation is happening in the auto industry, and we are leading the way. Established in 2023, we manufacture high‐quality lithium‐ion EV batteries and storage solutions—building tomorrow’s clean‐energy future, today. We’re committed to creating a workplace where every associate is valued, supported, and empowered. If you’re ready to help shape the next generation of electric vehicles, we want you on our team!Now Hiring – Be part of the future of electric vehicles!\r\nThe LGES‐HONDA Joint Venture is bringing the power! A major transformation is happening in the auto industry, and we are leading the way. Established in 2023, we manufacture high‐quality lithium‐ion EV batteries and storage solutions—building tomorrow’s clean‐energy future, today.\r\nWe’re committed to creating a workplace where every associate is valued, supported, and empowered. If you’re ready to help shape the next generation of electric vehicles, we want you on our team!

Job DescriptionBenefits: • Competitive salary, • Flexible schedule Transform Homes. Earn at the Top of the Market. Re-Bath is a nationally recognized leader in bathroom remodeling, and our Long Island team is growing. Were looking for a high-performing Sales Design Consultant who can confidently guide homeowners through a premium renovation experience, and close. This is a full-time, in-home consultative sales role serving homeowners across Nassau and Suffolk counties. If you thrive in a competitive, high-income environment and want qualified leads, strong systems, and real earning power, this is for you. What Youll Do • Meet with pre-qualified Long Island homeowners for in-home design consultations, • Understand client priorities, timelines, and budgets, • Design customized bathroom solutions using Re-Baths proprietary products, • Present pricing clearly and professionally, • Close deals on the first visit and submit clean, production-ready jobs, • Manage your schedule efficiently across a defined territoryWhats In It For You, • $120,000$300,000+ annual earning potential (uncapped commissions), • Top performers consistently earn six figures in this market, • Qualified appointments provided no cold calling, • Bonuses for referrals and self-generated leads, • Paid training, proven sales system, and ongoing coaching, • Flexible schedule with autonomy, • Strong support team from sales to productionCompensation structure is designed for high-cost-of-living markets like Long Island. Who You Are • 3+ years of B2C, in-home, or consultative sales experience, • A proven one-call closer with documented results, • Comfortable presenting premium solutions to discerning homeowners, • Tech-savvy (iPad/iOS, CRM systems), • Competitive, disciplined, and self-directed, • Detail-oriented with strong follow-through, • Clean driving record and ability to pass background checkHome improvement, remodeling, or design experience is a plusbut sales performance matters most. This role is best suited for experienced in-home sales professionals who have consistently earned $100,000+ in commission-based roles. Compensation and Benefits • $120,000 to $300,000+ per year, commission-based and uncapped., • Paid training and support from a team who cares about your success., • Professional Development with a sales coach who knows the industryJoin a Brand Built on Trust and Transformation Re-Bath is a leader in bathroom remodeling, known for providing beautiful, stress-free transformations that improve lives. If youre ready to turn your drive, creativity, and people skills into a rewarding career where performance is celebrated, we want to hear from you.

Job Description About Us: We are a leading manufacturing company on the boarder of Nassau and Suffolk Counties, dedicated to producing high-quality products that make a difference in various industries. We take pride in our commitment to excellence and innovation. What We're Looking For: An Electro-Mechanical Assembler that will be at the heart of our manufacturing process. Your responsibilities will include: ESSENTIAL JOB DUTIES AND RESPONSIBILITIES: · Electro-Mechanical Assemble and hand soldering of small precision devices, working with assembly aids and microscope. · Follow assembly drawings and work instructions. · Complete work assignments on time. · Observe equipment performance and reporting malfunctions. · Observe the condition of parts and material supplied: observing results of the operations; reporting all nonconforming results. · Maintains safe and clean work environment by observing safety and housekeeping standards. • Conducting quality checks to ensure top-notch products., • Collaborating with a skilled team to meet production goals., • Proven experience in electro-mechanical assembly (IPC-610 or equivilent Preferred), • Strong attention to detail and manual dexterity., • Basic knowledge of hand and power tools. Education: High school diploma or general education degree (GED) Experience: 3-5 years as an Electro-Mechanical Assembler Aerospace Industry background a plus Compensation: Your dedication and experience matter to us, which is why we offer competitive pay ranging from $20 to $30 per hour, depending on your skills and experience. Job Type: Full-time Benefits: • 401(k), • Profit Sharing, • Health insurance Work setting: In-person Work Location: In person

Job Description Power-Flo Technologies is seeking an HVAC Sales Representative. We are a two location temperature controls distributor specializing in providing engineering, materials, and startup assistance for temperature control systems. As the HVAC Sales Representative, you will: • write orders and assist in selling HVAC controls., • Develop and maintain vendor relationships., • Develop and maintain relationships with an assigned customer base, including key accounts, ensuring their satisfaction with our products and services always., • Work with other branch personnel to ensure great customer service from the order to the delivery and beyond., • Schedule outside appointments with existing customers to review applications requirements, and uncover new opportunities, • Assist customers (in person or over the phone) during a sales inquiry, in an effective and efficient manner that encourages return business., • Accurately conducts the sales transactions by appropriately entering the customer order in the system., • Maintains an awareness of all product knowledge, information and promotions. Suggests alternative product when appropriate., • Picks and fills orders when appropriate. Assures that orders leaving the warehouse are checked and accompanied, by the appropriate documentation., • Purchase special order material, for customers, as per company procedure. Expedite open orders., • Process product returns, per company procedure assuring that all documentation is collected., • Continually enhance sales skills and product knowledge to promote a professional image in the field., • Monitor sales trends and product performance results. Necessary Qualifications: • 2+ years of HVAC sales experience required, • HVAC product and vendor knowledge, • Demonstrated ability to communicate clearly and concisely in written and verbal formats, • Strong customer service orientation, • High school diploma or equivalent, as determined by the company, • Must have a valid and clean driver's license to travel to vendors and customers in the LI/NYC area Pay & Benefits: • Wage Commensurate with experience ($60,000 - $80,000 annually), • Medical, dental, and vision, • PTO Program and Paid Holidays, • 401K, • EAP, • ESOP (Employee Stock Ownership Plan), • Commission Potential With over 300 team members across 11 different locations, Power-Flo Technologies is an ever-growing group of companies headquartered in Long Island, NY. Power-Flo Technologies is the premier provider of supplies, services, and solutions to the electrical, industrial, mechanical, and automation industries. With teamwork at the forefront of our vision, we foster opportunities for learning and professional development while providing on-the-job training. Visit for details on the company. We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description Job Summary The Sanitation Specialist is responsible for deep cleaning and sanitizing of food production rooms, equipment and all other rooms associated with a high and low care areas in a food manufacturing facility while following the 7 steps of sanitation to ensure optimal cleanliness. Primary Responsibilities * Deep clean and sanitize Floor, walls and food production equipment following the 7 steps of sanitization. * Clean windows, glass partitions, and mirrors, using soapy water or other cleaners, sponges, and squeegees. * Dust off packing areas of debris and other loose particles. * Wipe metal detector and tables. * Power wash floor. * Mix Various cleaning agents * Identify and report possible repairs * Other activities as assign by supervisors Requirements * High school diploma. * Prior Cleaning experience ‘’preferred’’ * Cell phone and email access.