Clean power jobs in Wayne, New JerseyCreate job alerts

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, Connecticut, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Summary:: The Fleet Technology Technician will provide the first line of support of all onboard truck technology and related hardware. Assist with all problems via phone, email, remote support, site visits, or along the driver’s route. They are responsible for the safe and productive operation of the fleet assets through the efficient performance of the department’s daily activities. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Install the Routeware tablet, and interface all components with the systems on the vehicles, including the in-cab video cameras, Samsara Cameras, and radios., • Maintain a high degree of customer service for all support inquiries and adhere to all service management principles, • Take ownership of user problems and be proactive when dealing with user issues, • Skill to disassemble vehicle interiors without damaging the vehicle or the interior components or where to locate information if disassembly procedure is unknown or not evident, • Identify component failures quickly, and replace as necessary, • Properly choosing and running wires, cables, and harness assemblies throughout the vehicle (including into the engine compartment, trunk/hatch and doors) with a competency to execute safe and serviceable methods in observing current capacity, weather proofing, passage of wire through metal, wiring alongside existing vehicle wiring, and where wiring passes near any moving parts, • Knowledge of various commercially available installation accessories such as wiring harnesses, high current power/ground wiring, circuit protection devices, etc., • General knowledge and familiarity of the appropriate application of various fasteners for equipment mounting and those encountered during removal interior panels with regard to the original integrity of the vehicle and subsequent installation, • Install Bluetooth hands-free cellular devices or modules, or wireless audio streaming devices or modules with driver safety as a priority, and in a way that maintains standard vehicle operation and safety features. Hands-free devices should be installed in compliance with all local and Federal laws, as well as in compliance with CEA recommended practices, • Approach all encounters with employees, customers and vendors in a friendly, service-oriented manner., • Always maintain appropriate confidentiality of all verbal and/or documented information., • Other projects and tasks as assigned. III. Responsibilities • Fluency in English, Spanish is a plus, • Applicants must pass drug test, • Valid driver’s license and a clean driving record is strongly preferred, • Travel in company vehicle to all locations in New Jersey, New York State, New York City, Pennsylvania, and Ohio as needed. Overnight stay(s) could required (Rare), • Three years (3) professional experience is preferred., • Training at an installation related school or program is a plus, • Should have a strong knowledge of PC’s, USB peripherals, Bluetooth, Serial (RS-232), Cellular Data, etc. Education and Experience: High School with 3+ years of related experience. Certificates, Licenses, Registrations or Other Requirements: None required. Other Knowledge, Skills or Abilities Required • Self-Starter with strong communication skills. Listed below are key points regarding environmental demands and work environment of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. • Required to use motor coordination with finger dexterity (such as keyboarding, machine operation, etc) most of the work day;, • Required to exert physical effort in handling objects less than 30 pounds rarely;, • Required to be exposed to physical occupational risks (such as cuts, burns, exposure to toxic chemicals, etc) occasionally;, • Required to be exposed to physical environment which involves dirt, odors, noise, weather extremes or similar elements often; Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Salary Range Minimum: USD $25.00/Hr.

Job Description Job Title: Coating Operator II Department/Division: Manufacturing/Coating Reports to: Manager, Coating About LTS: LTS Lohmann Therapy Systems is a premier, global Contract Development and Manufacturing Organization (CDMO) and partner the pharma industry trusts most to deliver innovative oral, transdermal, and intradermal drug delivery systems. From concept to market, launch to lifecycle management, we deliver single source oral and transdermal drug delivery solutions that power partners’ market advantage. Every one of our 1,000 plus members of the LTS family, across three continents, is focused on utilizing our collective strength and innovation to explore new therapeutic opportunities, maximize partner value and improve patient outcomes. We Care. We Create. We Deliver. Job Summary Lohman Therapy Systems North America is seeking a highly motivated and experienced Machine Operator with a strong focus on coating processes to join our growing team. In this role, you will play a crucial part in the successful production of high-quality products by operating and maintaining various coating equipment, ensuring optimal performance, and maintaining a safe and clean work environment. This is a full-time onsite position located in West Caldwell, NJ • Control and align multiple web paths during manufacturing with tension drive units, pressure rollers, and an edge guiding system., • Perform machine setups and correct machine functions., • Handle raw stock materials with a pallet jack., • Splice materials with a utility knife, tape gun, and splicing table., • Ensure proper disposal of hazardous waste, cleaning solutions, and adhesive compounds., • High school diploma or equivalent., • 4–5 years of machine operator experience, with at least 3 years of GMP manufacturing experience, preferably in the pharmaceutical field., • Experience with coating is preferred., • A strong mechanical aptitude and familiarity with equipment operation., • Strong math skills are a must., • Good reading, writing, and verbal skills., • Good computer skills to navigate systems and fill out necessary forms and documents., • Knowledge of laminating pressures for various types of films, fabrics, and foams., • Knowledge of Corona Treatment. LTS is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.

Job DescriptionThis job post is collecting resumes for manufacturing shop clerks in our Garfield, NJ warehouse. It does not necessarily mean we currently have an opening. Once you apply your application will be saved in our database for future openings. Positions on the manufacturing shop floor include assemblers, engravers, laminators, screen press operators, packaging and floaters. SOME ESSENTIAL DUTIES AND RESPONSIBILITIES OF EACH ROLE ARE: ASSEMBLER • Review products for quality control and to ensure they meet expectations, • Disassemble, modify, and reassemble products, • Examine connections for correct fit of parts and subassemblies, • Maintain a safe and clean environment, comply with safety regulations, • Troubleshoot malfunctions, alert supervisors if repairs are needed, • Maintain inventory, expedite supply orders when inventory levels are low, • Monitor equipment operation to ensure that products are not flawed., • Set equipment controls to meet cutting specifications., • Engrave and print patterns, designs, etchings, trademarks, or lettering onto flat or curved surfaces of a wide variety of metal, glass, plastic, or paper items, using hand tools or hand-held power tools., • Mount materials or workpieces onto production equipment., • Examine engraving for quality of cut, burrs, rough spots, and irregular or incomplete engraving., • Clean workpieces or finished products., • Receive production orders and job assignments from supervisor, • Verify the materials supplied for production are correct to produce job., • Set up press by hanging the proper roll of film, setting up feeder and delivery and setting the correct timing and tension required., • Pull proof sheets to confirm material position, adhesion and appearance and secure an approval prior to the production run., • Inspect printed material to ensure the correctness in all areas of color, registration, stock, and all other customer specifications., • Adjust and maintain registration, color, perforations, and other customer specific printing specifications, • Conduct a visual inspection prior to printing of all material stock and ink for defects or noncompliance with job specifications., • Carry out the final inspection to ensure the material, ink, plates or screens, cylinder/rollers, tension, and all other necessary customer specifications are correct prior to the start of the running the job., • Scan product bar codes into computer system and sure the correct product items are as described per order., • Ensure quality control of orders and that they are packaged properly for outgoing shipping including the correct quantity, weight, and item numbers/custom., • Sort and count products before packaging., • Operate assembly machines such as product sealing and laminating machines., • Gather and obtain finished products throughout the warehouse from assemblers, engravers, laminators, screen press operators, and digital printing teams to then package for shipping., • Load products onto rolling cards and send them to the shipping team. EXPERIENCE AND QUALIFICATIONS • High school diploma/GED, • 1-2 years of experience or specialized training in general assembly preferred, • Ability to read, write, and understand English, • Ability to stand for long periods of time, • Ability to lift up to 50 pounds, • Ability to bend, reach, and stoop, • Skilled in operating hand and power tools preferred, • Strong attention to detail, may work on assignments that are routine in nature, • Respectfully take direction from supervisors, overall positive attitude, • Follow standard practices and procedures when directed, • Reliable and prompt in attendance, • Productive in fast-paced environments, • Competitive pay wage., • Health, dental, and vision insurance offered., • Company-paid basic life insurance., • 401(K) with matching contribution., • Pet Insurance., • Paid Time Off- vacation, personal, sick, and holidays.

Job DescriptionJob description Trap-Zap Environmental Systems Inc. is a premier environmental company servicing the food service industry for over 30 years. We are seeking a personable Tile installer partner to join our growing organization. We are proud of having created a unique and valued experience for some of the most well- known restaurant/supermarket/shopping mall concepts throughout the country by providing exceptional service and technology crafted to meet and exceed their business needs. We owe our success to a set of simple principles: integrity, honesty, flexibility and ambition. It is the embodiment of these traits that make Trap-Zap Environmental a distinctive solution to our clients. As a privately-held company we seek individuals who can help contribute to the company’s success. This means you are not shy, you like rolling up your sleeves and digging in and helping solve problems, you feel energized when you present an idea and most importantly you are persistent, passionate and never satisfied with the status quo. About Your Role: We are looking for an experienced and highly motivated Tile Installer with a strong mechanical background. Responsibilities include: • Installation of tiles accurately and efficiently, ensuring high-quality workmanship., • Utilize hand and power tools to cut and shape tiles as needed., • Collaborate with construction teams to ensure timely project completion., • Maintain a clean and safe work environment while adhering to safety protocols., • Troubleshoot and resolve any installation issues that may arise on-site.Must be a team player work well with others. This position will be the lead on projects. Travel and evening work is involved. Great pay and benefits with unlimited overtime. Clean driving record E-mail resume with qualifications so we can discuss further the benefits and scope of work. Job Type: Full-time Pay: $20.00 - $35.00 per hour Benefits: • Health insurance, • Paid time offShift availability:, • Overnight Shift (Required)Ability to Commute:, • Wyckoff, NJ 07481 (Required)Ability to Relocate:, • Wyckoff, NJ 07481: Relocate before starting work (Required)Willingness to travel:, • 75% (Preferred)Work Location: In person

Job DescriptionCompany Description We specializes in EV charging infrastructure maintenance solutions. We are at the forefront of the electric vehicle revolution, building cutting-edge charging systems to support the transition to a cleaner, more sustainable future. As the demand for EV charging stations grows rapidly, skilled professionals in low-voltage systems, electrical wiring, and networking are in high demand. This is your chance to expand your career into the EV industry, working on innovative charging technologies that power the future of transportation. If you have experience in low-voltage electrical work and are eager to learn and grow in the EV sector, we encourage you to apply! Job Description Position: EVSE Maintenance Technician Location: On-site in Northern NJ, Los Angeles CA, Chicago IL (5 days/week) Schedule: Monday – Friday (9 AM – 6 PM) Growth Opportunity: This role is ideal for candidates with low-voltage or electrical systems experience who are eager to transition into the rapidly growing EV charging industry. As the demand for electric vehicle infrastructure expands, professionals with expertise in wiring, conduit installation, networking, and power systems will play a critical role in shaping the future of transportation electrification. This position provides hands-on training, exposure to cutting-edge EV technologies, and opportunities for career advancement in a high-growth sector. Candidates will gain valuable experience working with EV charger installations, troubleshooting, networking configurations, and industry standards, positioning themselves for long-term success in the clean energy and electrification space. Qualifications Key Responsibilities • Install, wire, and commission EV chargers and associated equipment., • Perform low-voltage electrical work, including conduit installation, wiring, and panel connections., • Troubleshoot and repair EV chargers, networking components, and power distribution systems., • Work with LAN/Wi-Fi networks and configure network-connected devices., • Occasionally travel to customer sites for installation or troubleshooting (rare cases)., • Read and interpret electrical schematics and technical manuals., • Collaborate with engineers on product validation and testing., • Maintain proper documentation for installations, troubleshooting, and network configurations. Additional Information Who Should Apply? • Experience with low-voltage electrical work (wiring, conduit installation, panel work)., • Comfortable working with 208V/240V single-phase and 480V 3-phase electrical systems., • Background in network setup and troubleshooting (LAN/Wi-Fi) and configuring network equipment., • Interest in EV charging technology and renewable energy., • Knowledge of PLCs, microcontrollers, Arduino, Raspberry Pi, or ARM-based devices is a plus., • Ability to work early morning/late afternoon for special cases., • Willing to travel occasionally for site visits. Why Join Us? • Be part of the growing EV industry and gain hands-on experience in cutting-edge charging technology., • Expand your electrical and networking skills in an emerging high-demand field., • Work with industry experts and engineers building next-generation EV infrastructure., • Career advancement opportunities in a fast-growing sector. Job Types: Full-time, Contract Benefits: • Dental insurance, • Health insurance, • Paid time off, • Vision insurance Schedule: • 8 hour shift, • Monday to Friday Ability to Commute: • (Required)Ability to Relocate:, • (Required) Work Location: In person

Job Description OPENINGS/SHIFTS TOTOWA, NJ - 8 hour shifts ; M-F with occasional weekends Founded in 1964, Kari-Out Company prides itself on being built up from the ground floor with an entrepreneurial attitude towards the growing food service industry. After gaining a strong position in our condiment lines, the company has expanded to include virtually all areas of the food service industry. Today, Kari-Out Company employs over 500 people and has locations throughout the country. It is a privately held business that has a unique culture of customer service and entrepreneurship. It is recognized for their broad assortment of quality products and commitment to high quality, customer focused products and service. The maintenance technician position is responsible for performing highly diversified duties to install, troubleshoot, repair, and maintain production and facility equipment according to safety, predictive and productive maintenance systems, and processes to support the achievement of the site’s business goals and objectives. • Perform highly diversified duties to install and maintain production machines and the plant facility’s equipment., • Provide emergency/unscheduled repairs of production equipment during production and performs scheduled maintenance repairs of production equipment during machine service., • Perform simple machinist and machine operator duties and responsibilities, • Read and interpret equipment manuals and work orders to perform required maintenance and service., • Diagnose problems, replace, or repair parts, test and adjust., • Perform regular preventative maintenance on machines, equipment, and plant facilities., • Use a variety of hand and power tools, electric meters, and material handling equipment in performing duties., • Detect faulty operations, defective material, and report those and any unusual situations to proper supervision., • Comply with safety regulations and maintain clean and orderly work areas., • Minimum of 2-3 years maintenance experience in a manufacturing environment, • Electrical experience required in a manufacturing environment, • Prefer vocational training or a degree in a technical field

Job Description Order of Friars Minor – Franciscan U.S. Organization Maintenance Technician – Full Time St. Anthony Church, Butler, New Jersey Organizational background and Mission We Franciscans owe our inspiration to Francesco di Bernardone, an affluent young merchant from the Italian town of Assisi, who in 1206 renounced his wealth and social status in favor of a life dedicated to God and the poor. His life and ministry inspired other men to join him and become the first Franciscan friars. Today, Francesco is known as St. Francis of Assisi, and the Order of Friars Minor comprises more than 100 provinces located around the world. The Gospel life of the Friars has four central components: first, to be men of prayer; second, to live as lesser ones, “not making anything our own;” third, to create a brotherhood of mutual care among ourselves; and fourth, to “go about the world” entering people’s everyday lives as heralds of God’s reign and agents of Gospel peace. A bit about the role: Reporting to the Guardian of St. Anthony Friary, you will ensure the smooth and efficient operation of the church, school and cemetary. In this key role, you will conduct routine inspections, troubleshoot building systems, complete general repairs, and maintain safe, clean, and welcoming environments. You will also collaborate with the Maintenance Technician of the Church and School to share resources and assist with larger tasks when needed. Full-time employees supporting Province of Our Lady of Guadalupe enjoy a generous benefits package including affordable healthcare, paid time off, life & disability insurance and a generous 401(k) annual contribution. Key Responsibilities: • Perform routine inspections and preventive maintenance on friary and convent facilities, including mechanical, plumbing, electrical, heating, and cooling systems., • Ensure cleanliness and upkeep of bathrooms, kitchens, common areas, and waste disposal areas; oversee dumpsters to maintain sanitation., • Troubleshoot and repair building systems, performing minor carpentry, painting, and drywall work, while recognizing when specialized contractors (plumbers, electricians, HVAC technicians) are required., • Maintain landscaping and exterior safety, coordinating with outside services for groundskeeping, snow removal, and other seasonal needs., • Monitor safety and compliance, ensuring that building systems meet safety standards and environmental regulations; maintain accurate logs of all maintenance activities and inventory., • Respond promptly to emergencies, including equipment failures, leaks, or power issues to reduce disruption to friary and convent operations., • Manage supplies and equipment, ordering and tracking materials needed for timely completion of tasks., • Work collaboratively with campus staff, providing assistance to the Maintenance Technician of the Church and School and requesting support when tasks require more than one person. About you: • High school diploma or GED required; technical training or certification is a plus., • Knowledge of mechanical, plumbing, electrical, and heating/cooling systems with experience using diagnostic and power tools., • 1–2 years of experience in general building maintenance or a related field preferred., • Strong problem-solving skills, with the ability to make sound decisions and work independently., • Valid driver’s license and ability to lift/transport up to 30 pounds., • Demonstrates reliability, good communication skills, and a cooperative work style that reflects Franciscan values. Celebrating difference, together stronger Franciscan values suggest we don’t just accept difference — we celebrate it, we support it, and we thrive on it as we demonstrate our spirituality for the benefit of people, particularly the underserved and marginalized. We are committed to providing an environment of mutual respect and make the world a better place.

Job DescriptionDescription Job Responsibilities: • Perform CT scans while ensuring patient safety, comfort, and privacy., • Prepare medical, surgical, and radiological supplies for procedures., • Maintain sterility of instruments and adhere to HIPAA regulations., • Communicate with patients and families before, during, and after procedures., • Monitor patient conditions, especially before and after contrast injections., • Maintain medical records, reports, and supplies inventory., • Assist with emergency response procedures when necessary., • Clean and maintain CT equipment, work areas, and supply rooms., • Follow venipuncture and power injector protocols., • Ensure timely imaging processing and communication with radiologists. Location: Chilton Medical Center, 97 West Parkway, Pompton Plains, NJ 07444 Schedule: Monday – Friday, 11 AM – 7 PM (No weekends, No on-call) Requirements Requirements: • Education: High School Diploma/GED + Radiographer Technical Training Program, • Certifications & Licensure:, • ARRT RT (R), • ARRT RT (CT), • NJDEP – New Jersey State X-Ray License Medical benefits

Job Description Job Responsibilities: -Perform CT scans while ensuring patient safety, comfort, and privacy. -Prepare medical, surgical, and radiological supplies for procedures. -Maintain sterility of instruments and adhere to HIPAA regulations. -Communicate with patients and families before, during, and after procedures. -Monitor patient conditions, especially before and after contrast injections. -Maintain medical records, reports, and supplies inventory. -Assist with emergency response procedures when necessary. -Clean and maintain CT equipment, work areas, and supply rooms. -Follow venipuncture and power injector protocols. -Ensure timely imaging processing and communication with radiologists. Location: Chilton Medical Center, 97 West Parkway, Pompton Plains, NJ 07444 Schedule: Monday – Friday, 11 AM – 7 PM (No weekends, No on-call) Requirements Requirements: -Education: High School Diploma/GED + Radiographer Technical Training Program -Certifications & Licensure: -ARRT RT (R) -ARRT RT (CT) -NJDEP – New Jersey State X-Ray License -BLS Certification Benefits $80/Hour, $120/Hour (Overtime) Medical benefits

Job Description Leading Audio/Visual Company seeks technician with good customer service and audio video skills. Individual should have Associates level college degree in a technology related field and/or minimum 5 years of previous employment with installation responsibilities in the AV industry and a knowledge of integrated conference room technology and a minimum of 3 years experience as a lead technician. Our corporation is looking for an individual who possesses a full understanding of all areas of the A/V field including but not limited to: • Excellent termination, cable management and organizational skills, • Ability to read and follow AV system flow diagrams and support documentation, • Ability to install, operate and service most AV equipment and systems, • Projection systems / display devices, • Crestron / AMX control systems, • Switching / routing / interfacing technology, • Excellent interpersonal skills, accuracy and attention to detail, • Proficiency in running a project site, installs and leading a crew of technicians, • Ability to work outside regularly scheduled hours a plus, • Ability to operate power tools, lift heavy loads and work at heights using ladders and/or scaffolding, • Technical AV certifications such as CTS, Crestron DMC-D, • Proficiency in the use of personal computers including such programs as MS Word, Excel and Outlook. All of the below may be performed and reviewed prior to possible employment. • Background checks, • Drug screening, • Finger printing

Job DescriptionBenefits/Perks • Competitive Compensation, • Career Advancement Opportunities, • 401 K, • Health Insurance options Responsibilities • Assemble pipe sections, tubing, or fittings, using couplings, clamps, screws, bolts, cement, plastic solvent, caulking, soldering, brazing, or welding equipment, • Install pipe assemblies, fittings, valves, appliances such as dishwashers or water heaters, or fixtures such as sinks and toilets, using hand or power tools, • Plan the layout of plumbing, using drawings, • Perform maintenance of water supply systems, • Install and maintain gas and liquid heating systems, • Professionally interact with customers and clearly communicate work orders and statuses Qualifications, • Minimum 5 years of professional experience, • Strong knowledge of hydraulic systems, • Ability to handle plumbing tools and equipment, • Clean and valid driver's licensePay based on experience.

Job DescriptionBenefits: • Referral program, • 401(k), • Bonus based on performance, • Company parties, • Employee discounts, • Flexible schedule, • Free food & snacks, • Free uniforms, • Health insurance, • Paid time off, • Competitive massage rate when booked, • Gratuity, commission and potential bonus, • Steady clientele, • Healthcare benefits for full-time employees, • Paid continuing education credits for full-time employees, • $100 Annual Self Care reimbursement, • Earned PTO, • Product discounts, • Flexible scheduling, • No mandatory sales goals or scripts; focus on your craft and guest's needs, • All service supplies and wardrobe requirements are provided, • Top-of-the-line hydraulic massage tables and all new equipment, • Inspiring, calming work environment for both clients and therapists, • Strong teamwork ethic with an emphasis on massage therapist support, • A positive and supportive team with a present general manager and engaged owners, • Off-site events and team building opportunities, • Celebratory lunchesSchedule / Expected Work Hours:, • Ability to work flexible hours, including evenings, weekends and holidays, • Availability for at least one PM and one-weekend shiftResponsibilities:, • Share the healing power of touch to inspire and transform through the benefits of massage therapy., • Provide therapeutic massage through a variety of modalities (Prenatal, Sports, Stretching Techniques, etc.), • Ensure the service room, equipment, and tools are kept clean and in compliance with established licensure standards. All required supplies are provided., • Full and Part-Time positions available., • Weekend availability is requiredteam members must be available to work either Saturday or Sunday, including both day and evening shifts., • Weekend, Holidays, Day shift, Night shift, • Will consider qualified candidates beginning their careers in massage therapy who possess the right qualities and demonstrate an innate talent for and understanding of therapeutic massage.Qualifications:, • Desire to be part of a team that has an infectious passion for health and wellness., • License/certification required in state of practice. Must present New Jersey license during the interview process and maintain original license throughout employment if hired., • Knowledge of Swedish and Deep Tissue Massage and other modalities., • Availability during prime earning potential periods including nights, weekends, and holidays., • Must be able to stand and exert well-paced mobility for up to 6 hours in length. Length of time of these tasks may vary from day to day and task to task., • Should be able to bend, stoop, squat, and stretch to fulfill room resetting tasks and all massage service protocols. Requires grasping, standing, sitting, walking, repetitive motions, bending, climbing, listening, and hearing ability and visual acuity. Company Purpose/Mission: Self-Care is Essential The NOW is designed as a refuge to help you disconnect from the outside world and reconnect within. We are where you go to turn down the noise so you can listen to what your body needs. We say show up for yourself so you can better support others. Relax your body. Reset your soul. Start NOW. We design our services to be convenient, affordable, and high-quality always. The menu of customizable enhancements makes personalizing your service simple. Our interiors are recognized for their elevated aesthetic, inspired by exotic destinations from around the world. Company Values: Brand Truths LIVE IN THE NOW Be Present. Take time to recharge and reconnect within. KINDNESS IS MAGIC Positive energy always. Create a circle of warmth and compassion from welcoming guests to giving back to your community. CARE FOR THOSE WHO CARE FOR OTHERS Foster an environment where team members feel valued, recognized, and rewarded. AUTHENTICITY ALWAYS Open and transparent communication with our inner circle and guests.

Job Description MAURY MICROWAVE JOB DESCRIPTION Date: 06/23/2025 Job Title: RF Test Technician FLSA Status: Non-Exempt Department: DC Assembly & Test Reports to (Title): Lead Manufacturing Engineer Brief Summary of Position: Perform RF testing and calibration of instruments, sub-assemblies, RF assemblies, and complete hardware systems. Possess a well-rounded set of mechanical, electrical, and troubleshooting skills. The person hired for this position will work on industry-leading low-phase noise synthesis, analysis, power detection, and satellite link emulation products. Essential Functions of the Position: • Use complex tools such as spectrum analyzers, signal generators, vector-network analyzers, current probes, voltmeters, and precision inspection equipment to test and troubleshoot RF-based equipment in the frequency range of DC to 40GHz., • Use engineering and manufacturing instructions to test assembled electronic units. Ability to read and interpret electrical schematics., • Interpret data by applying a basic understanding of DC and RF: voltage, current, power, insertion loss, return loss, linearity, phase noise, noise figure, and spectral analysis., • Determine acceptable versus faulty performance. Repair and adjust as required using standard troubleshooting techniques., • Repair or replace defective or improperly functioning circuitry and electronics components using hand tools and soldering iron., • Maintain system logs to document testing and equipment operation., • Record and analyze data results from standard test routine formats., • Ability to manage multiple tasks and meet established deadlines. Requires good planning, organization, and time management skills., • Diligent in following ESD protocols., • Maintain a clean, safe work area compliant with ISO procedures, policies, and regulations., • Ask questions when instructions are not understood or are unclear. Requirements (education, prior work experience, special skills, etc.) • High school diploma or equivalent and 5+ years of formal electronic and mechanical assembly experience., • Ability to read and interpret electronic and mechanical diagrams., • Familiarity with cavity filters and frequency converters is a plus., • Simple programming skills is a plus., • Strong assembly and RF test skills., • Ability to use basic hand tools and soldering iron., • Excellent communication skills; good analytical and problem-solving skills., • Works well as part of a small team with high output., • Computer proficiency using various software programs (Microsoft Office, Factory test software), • Knowledge of Excel formulas Benefits We offer the following benefits to full-time employees who have met all eligibility requirements: • Group medical, dental, and vision plans, group life/AD&D, and long-term disability insurance., • Group 401(k) plan with company matching contributions., • Paid time off and company-paid holidays. Physical Demands/Sensory Function: Frequency of Use: Stand Frequently Walk Frequently Sit Regularly Use hands Regularly Reach with hands and arms Regularly Climb or balance Occasionally Stoop, kneel, crouch, or crawl Occasionally

Job Description Benefits: · A fun work environment and the ability to meet amazing co-workers and customers · Competitive salary ● Bonus based on performance · Free uniforms ● Training & development What We Offer: Competitive wages and incentive bonuses (varies depending on experience level) · Great schedule, no evenings, no major holidays. We work 8-10 hours a day, varying 30-40 hours per week with varying drive times. Potential for Overtime. · A fun work environment and the ability to meet amazing co-workers and enjoy our beautiful area! · An innovative team atmosphere where your opinions will be valued and heard. · Opportunities for advancement and personal development. We Are: A young, rapidly growing company that has reinvented the process of commercial and residential home services including window cleaning, Power/Soft Home Washing, Gutter Cleaning and Post Construction clean up. At every point of the process, we have developed and utilized technology to increase the efficiency of our workers and the transactional ease of our customers. By utilizing a "people first" approach, we have developed an internal culture that is second to none in the industry. From the senior management to a window cleaner on their first day of work, we treat everyone on the team as an equal and are grateful for their contribution. What You Will Do: Complete window cleaning, gutter cleaning. house washing jobs and post construction clean up and provide exceptional customer service. · Excel in a team environment, As a Team Lead you will mentor and develop people too. · Help our business grow by offering additional services, hang door hangers, and talk with neighbors. · Establish, develop, and maintain positive business and customer relationships. · Create memorable moments to maximize customer experience. · Continuously improve through feedback and ongoing training · Be rewarded for your efforts and success. · Work with our advanced window cleaning technology, including water fed poles capable of cleaning up to 5 stories, without the need for climbing on ladders or heavy equipment. * Some work does require ladders and/or use of Boom and/or scissor lifts. Company Overview: Sparkle Squad is growing and looking for positive people who enjoy the outdoors to join our team! Since opening in April 2012, our company has grown to be one of the largest window cleaning businesses in North America. We love what we do, and it shows in every window we clean. We are the Cleaner, Safer, Better, window cleaning company. Sparkle Squad has reinvented the window cleaning process with technology that almost eliminated the need for ladders. By utilizing a "people first" approach, we have developed an internal culture second to none in the industry. From the management team to a window cleaner on their first day of work , we treat every team member as an equal and are grateful for their contribution Contract length: Contract length is dependent on start date, we are a seasonal business so the contract length can range. Job Types: Full Time, Part Time, Contract, Potential For Extension Company DescriptionWork is year round, growing our commercial service line rapidly (office building, residential communities).Work is year round, growing our commercial service line rapidly (office building, residential communities).

Elevate your career at Marotta Controls, a New Jersey Top Workplace three years running! Dedicated to innovation, quality and excellence, we deliver cutting edge control systems for the Aerospace & Defense industry. At Marotta, we value bold thinking and teamwork, and we empower our employees to push boundaries while delivering top-tier solutions to our customers. Our team fosters a fun, collaborative culture where creativity and technical excellence thrive! Your next big opportunity starts here. Be part of a company where your work supports a mission that makes a difference-apply today! ESS Maintenance Mechanic I Job Summary of the position: This position is responsible for the effective and efficient preventative maintenance and repair of all equipment, tooling, and facility infrastructure essential to the Environmental Stress Screening (ESS) operation. The position supports various activities and projects to ensure the goals, objectives and strategic initiatives of the Marotta organization are achieved. In addition, effective interaction with a broad spectrum of people both internal and external to the organization is essential to successfully support operations. Essential job functions and responsibilities: • Inspect test equipment and associated infrastructure to detect malfunctions, damage, and adverse conditions and document accordingly for repair/resolution., • Perform preventative maintenance actions to monitor/prolong the life of environmental test equipment including, but not limited to, thermal chambers and electrodynamic shakers., • Perform basic troubleshooting to assess root cause of failure on environmental test equipment that is malfunctioning., • Carry out routine visual inspections of test equipment and electrical harnessing to verify that it is free of FOD and damage. Work with relevant functional groups within Marotta to track and repair damaged equipment., • Perform basic Preventative Maintenance Inspections (PMI) on facility system(s) and support equipment to monitor performance over time., • Manipulate high pressure (up to 6,000psi) infrastructure and equipment as needed to support the test operation., • Perform minor repairs on damaged environmental test fixturing including deburring, drilling, tapping, and surface finishing., • Support thermal screening including loading and unloading of test hardware, thermal chamber operation, and test data collection., • Familiar with the use of volt & multi-meters, hydrometers, flowmeters, amp probes, thermal data loggers, drills/hammer drills, tube bending equipment, and misc. hand-tools such as wrenches, ratchets, drivers and cutters. Position will mandate/provide assistance/training in use of specialized tooling., • Perform basic assembly and relocation of office & production furniture/equipment, reconfigure building areas., • Assist and provide guidance and support to Vendors and Contractors (as req'd)., • Effectively plan and coordinate actionable timelines facilitate repairs and project completion., • Adjust work assignments/priorities dynamically based on information from multiple management groups and production schedules., • Bring initiatives and activities to closure in a timely manner through effective interaction with individuals, both internal and external to the Marotta organization (as req'd)., • Abide by all safety, quality, housekeeping and company policies/procedures to ensure compliance with all regulatory and internal system requirements., • Contribute to a positive, cooperative and safe work environment through effective communication at all levels internal and external to the organization., • Actively participate in team meetings, improvement initiatives/programs, etc. and support actions to drive company initiatives/goals., • Consistently demonstrate commitment to company values, goals and objectives., • Practice consistent communication and provide timely correspondence with management to document findings/actionables and resolve problems in a timely manner., • Assume responsibility and accountability for related duties, special projects and miscellaneous assignments., • High School/Trade Diploma or GED, • 0-1 years' experience of mechanical hands-on repair or related experience in a manufacturing environment, • Must have a valid driver's license, • Familiarity interpreting technical data requirements, specifications, schematics, etc., • Self-motivated with ability to effectively interface with employees of varying skill levels and expertise, • Possess the visual acuity required for detailed inspection and repair activities, • Demonstrates mechanical aptitude and effective verbal/written communication skills required for multi-faceted interactions with all levels of personnel within the organization, • Work effectively in both an independent and team-based environment, • Computer literate/PC experience, with MS Office software, • Possess good organizational skills, attentiveness to detail and ability to prioritize tasks, • Ability to perform well in a high-paced and at times stressful environment Work Environment: • While performing the duties of this job, the employee is frequently exposed to conditions typical of a manufacturing/machine shop environment, including, but not limited to fluids, fumes or airborne particles, moving mechanical parts, noise and vibration, • This job interacts both in a professional office environment and a manufacturing/test lab environment. This role uses standard office equipment such as computers, phones, printers/scanners/copier machines, as well as environments inclusive of the appropriate eye, hearing and foot protection (as req'd)., • Temperature of work environment may be affected by outside/external temperatures, machining processes, etc., • Some travel may be required for this position (5-10%), • This is a full-time position. Days and hours of work are 10 hours, Monday through Thursday. Overtime, off-hours and weekend work are required, as job duties and schedules demand Physical Requirements: • While performing the duties of this job, the employee is regularly required to talk and hear., • The employee is frequently required to reach with hands and arms, and to use hands to finger, handle or feel., • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus., • The employee is regularly required to stand at length (7-8 hours, daily), walk consistently, stoop, bend, turn, balance, and/or crouch, and move about the facility., • This position requires the ability to skillfully use measuring instruments, hand, and power tools, • The employee may be required to lift, push, pull and/or move items weighing up to 40 pounds This position is at our Parsippany, NJ location. Pay Range: $28 - $35/hour Many of our contracts require proof that you are a U.S. citizen and/or that an export license has been obtained for employees who are citizens of certain countries. Your employment, both initially and continually thereafter, is conditioned on production of such proof of citizenship and/or any export license that may be required to comply with any and all applicable laws, regulations, or executive orders, or required by Federal, State, or local government contracts. At Marotta Controls, we are committed to a fair, performance-driven compensation approach that promotes consistency across all levels of our organization. We ensure that pay decisions are free from bias, based on objective criteria, and are regularly reviewed. Your level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, experience, and internal consistency. Additionally, we offer a highly competitive compensation package for this opportunity, including incentive compensation and a comprehensive suite of premium benefits. These include medical, prescription, dental, vision, life, and disability insurance, a 401(k) plan with company match, tuition assistance, paid vacation, sick and personal days, paid holidays, and flexible scheduling options such as compressed workweeks. We value and reward employee achievements and host multiple engagement events each quarter to foster a strong, supportive workplace culture. If you are looking to grow or accelerate your career and be part of a best in class organization while enjoying a work-life balance, please visit our website at to learn more about us and to apply. Check out all of our openings at VETERANS ARE ENCOURAGED TO APPLY No agencies, please. Pay Range: $28 - $35 per hour

Job DescriptionDescription: AAF International offers the most comprehensive clean air solutions available across the globe. Selling under the American Air Filter® and the AAF International® brand names, AAF International has been an industry pioneer since 1921 with manufacturing operations in 22 countries and over 6000 employees globally. Our products are the industry benchmarks for quality and performance. Our applications include commercial, industrial and residential solutions from the filters used in your home to the most critical cleanroom and power generation applications. We are a member of the Daikin Group, the world's largest air conditioning provider with $30 billion in revenue and over 75,000 employees worldwide. Founded in 1924, Daikin has grown into a diversified industrial manufacturing company offering solutions in clean, air, air conditioning, refrigeration, chemicals, oil hydraulics, defense systems and electronics. Our culture of continuous improvement, safety and world class operations is driven by our people-centered management philosophy. This philosophy is built around mutual selection: that while AAF seeks top talent people to join and deliver on our team, we also want each team member to receive job satisfaction, growth & development, and continued happiness in being a long-term member of the AAF family. This is fueled by our belief in treating our people, our supply partners, our customers and our environment with the trust and respect we each require, and our passion to give back to our community for our success. Read more about our philosophy at: AAF International is an Equal Opportunity Employer M/F/Disability/Veteran. We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, sex, sexual orientation, gender identity, national origin, citizenship, veteran status, uniform servicemember status, age, disability or any other legally recognized protected personal characteristics. Key Accountabilities: • Off-Load Trailers and Store in Inventory or Stage for Delivery, • Prepare and Load Filters for Shipment, • Assist with Monthly Inventory, • Assist Service Departments with Staging/Loading Trucks, • Keep a clean and safe working environment, • Communicate and cooperate with supervisors and coworkers, • Follow quality service standards and comply with procedures, rules and regulations Requirements: Position Requirements: • Proven working experience as a warehouse worker;, • Proficiency in inventory software, databases and systems;, • Familiarity with modern warehousing practices and methods;, • Good organizational and time management skills;, • Ability to lift heavy objects;

Job DescriptionEnergy Control is a field service controls company and has been in business since 2001. We provide scheduled service and emergency support in Industrial Boiler Rooms and Power Plants. We specialize in watertube and firetube boilers, burners and control systems. We also provide turnkey design-build controls solutions. We service what we sell. The innovation and success of our company has created an opening for a Self-Starting Individual who apply their previous knowledge to move forward with combustion controls. This position is for a Field Service Technician with both mechanical and electrical expertise who can calibrate and replace field devices as well as perform general electrical and burner troubleshooting. Individuals without prior field service experience need not apply. Understanding DC controls is a must. This person must be able to understand electrical drawings and P&IDs. Understanding Combustion and Control Loops is a plus. We typically service North/Central New Jersey and New York City. You must possess a valid driver’s license with a good driving record. A company service vehicle will be provided after a probationary and training period. The ideal candidate will be a self-starter who can work with others as well as work alone. Excellent communication skills are essential for customer satisfaction, retention, and company profitability. · Roles and Responsibilities: • The following is expected:, • Be presentable and meet with the customer to listen, understand, and provide support for equipment problems., • Perform mechanical, electrical troubleshooting and calibration on transmitters, switches, valves, and damper drives., • Perform device replacement, testing and commissioning tasks., • Work safely., • Provide satisfactory clean-up and housekeeping., • Follow-up with customer and provide a detailed service report, discuss a general summary, and determine if follow-up is required., • Upload documentation to the office, provide feedback for future follow-up, equipment ordering and scheduling. · Expectations:, • Must be fluent in English (written and verbal skills), • Must have prior field service experience in a technician role., • Must be Safety Oriented., • Must possess critical thinking and problem-solving skills., • Must be able to read electrical line and loop diagrams., • Must be able to follow instructions., • Understand 4-20mA analog electrical signals., • Understand 3-15psig pneumatic signals and electrical I/P transducers., • 120 VAC Control Signals., • Reading and understanding electrical prints and ladder logic diagrams., • Reading gages., • Participate with our internal knowledge sharing., • Be able to tolerate loud environments with occasional temperature extremes., • Understanding Combustion and Control Loops is a plus., • Experience performing Combustion Tuning is a plus. Previous Work Experience Preferred:, • Previous experience in a commercial or industrial setting working on controls systems., • Commercial or Industrial HVAC experience, • Auto Technician or Electrical Technician with experience in an Industrial and/or Commercial setting. · Minimum Education/Certification and Other Requirements:, • High School diploma or equivalent AND one of the following:, • Technical degree/certificate., • Associate’s degree in electrical or mechanical engineering technology, • 3-5 years relevant field experience., • Fluent in English, both written and verbal., • Must be a US Citizen. · Physical Demands/Unusual Working Conditions: 95% of work involves site visits to customer with 30 minutes to 1-1/2 hours away in NJ and NYC. Most site work is typically indoors within Industrial Boilers Rooms and Power Plants in Hospitals, Pharmaceutical, Chemical and Manufacturing Companies. Some work may be outdoors at Cogen Facilities. Must be willing to be on call to respond to emergency service calls. Must be able to list 50lbs. · Computer Skills: Must have strong skills using Microsoft Word, Excel and Outlook. PLC or blockware experience is a plus. · Company Benefits: Energy Control will provide competitive salary with overtime based upon experience, Family Medical benefits (employee portion is 100% company-paid), 401K with 6% match, Holidays, Vacation (time is based on years of company service) and cell phone allowance.

Job DescriptionDescription: Field Service Technicians, are you looking for an opportunity to take your expertise and join an industry-leading organization that will reward your hard work and effort? Join us today at DOC Services Inc.!We perform preventative and reactive maintenance on a variety of electromechanical equipment inside big box retail stores. With over 35 years of experience servicing over 1500 stores across the US, our fully certified technicians provide our customers with support and repair solutions designed to extend the life of their equipment, reducing downtime and minimizing the impact on our customer’s bottom line. As a Field Service Technician, you will play a key role in performing preventative and reactive maintenance services on electromechanical equipment within the target city and surrounding areas. Essential Responsibilities: • Troubleshoot mechanical and electrical failures on equipment and then provide a solution, • Perform preventative maintenance on equipment adhering to OSHA safety regulations, • Use hand and power tools to assemble, disassemble, and repair machines, • Respond to on-site preventative maintenance service calls within contract time frames, • Communicate effectively with customers, supervisors, and coworkers, • High school diploma or GED, • Minimum two years of electromechanical equipment repair experience or a combination of training and experience, • Strong electrical and mechanical knowledge; ability to read and understand schematics, • A valid driver’s license with a clean driving record required, • Must have excellent people skills and always represent the Company in a positive manner, • Strong attention to detail, organized, and able to work independently, • Competitive compensation, • Consistent Workload: With us, you'll have year-round work and guaranteed hours, • 401(k) plan with match up to 4%, • Company provided vehicle, phone, tablet, and gas card, • Excellent Medical, Dental, and Vision plans insurance plans, • Life Insurance, Short- and Long-Term Disability Insurance options, • Flexible Work Schedule to Fit Your Life, • Stable Company with Nationwide Service, • Robust Technician Support

Job Description PLEASE NOTE, 3RD SHIFT OPPORTUNITY REQUIRES TRAINING ON 1ST AND 2ND SHIFT BEFORE YOU'RE MOVED PERMANENTLY TO 3RD SHIFT*** Company History: Dr. Praeger’s was founded in 1994 with the mission to bring delicious frozen food to everyone. It’s not every day that two heart surgeons get into the food business, but over 20 years ago that’s exactly what our dads did. Motivated by what they saw in their practice, our parents set out on a mission to encourage sensible eating. They knew ingredients had to be nutritious and simple, that everything had to be delicious, and that their products needed to be super simple to make. While the world has changed since our little family business first got started, our focus remains true to our dads’ vision and we work every day to make them proud. To learn more visit: ** Electro/Mechanic ** **Company History: ** *Dr. Praeger’s was founded in 1994 with the mission to bring delicious frozen food to everyone. It’s not every day that two heart surgeons get into the food business, but over 20 years ago that’s exactly what our dads did. Motivated by what they saw in their practice, our parents set out on a mission to encourage sensible eating. They knew ingredients had to be nutritious and simple, that everything had to be delicious, and that their products needed to be super simple to make. While the world has changed since our little family business first got started, our focus remains true to our dads’ vision and we work every day to make them proud. *To learn more visit: [** **]() **Responsibilities: ** * Ensures operation of machinery and mechanical equipment by completing preventive maintenance requirements on motors, pneumatic tools, conveyor systems, and production machines; following diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications; troubleshooting malfunctions. * Locates sources of problems by observing mechanical devices in operation; listening for problems; using precision measuring and testing instruments. * Removes defective parts by dismantling devices; using hoists, cranes, and hand and power tools; examining form and texture of parts. * Determines changes in dimensional requirements of parts by inspecting used parts; using rulers, calipers, micrometers, and other measuring instruments. * Adjusts functional parts of devices and control instruments by using hand tools, levels, plumb bobs, and straightedges. * Controls downtime by informing production workers of routine preventive maintenance techniques; monitoring compliance. * Fabricates repair parts by using machine shop instrumentation and equipment. * Maintains equipment, parts, and supplies inventories by checking stock to determine inventory level; anticipating needed equipment, parts, and supplies; placing and expediting orders; verifying receipt. * Conserves maintenance resources by using equipment and supplies as needed to accomplish job results. * Provides mechanical maintenance information by answering questions and requests. * Prepares mechanical maintenance reports by collecting, analyzing, and summarizing information and trends. * Maintains technical knowledge by attending educational workshops; reviewing technical publications; establishing personal networks. * Maintains continuity among work teams by documenting and communicating actions, irregularities, and continuing needs. * Maintains safe and clean working environment by complying with procedures, rules, and regulations. * Contributes to team effort by accomplishing related results as needed. * Troubleshoot PLC hardware, and programing. * Working knowledge of control circuits, software knowledge, and relay logic/schematics. * Ability and or working knowledge of High voltage power. * Remove place and or program VFD, HMI, and electrical components as needed. * Maintain cleanliness of the work area, including sweeping, using a squeegee, and properly disposing of trash, bad product, cardboard, and plastic in designated bins. * Clean up after completing repairs, ensuring equipment and tools are cleaned and properly stored to keep the shop organized and safe. * Regularly clean and organize maintenance tools and workspaces, especially after repairs, quality issues or equipment servicing to uphold a safe and efficient work environment. Qualifications/requirements * Min 5 years’ experience * Technical or University degree or on-the-job experience a plus * Strong bilingual communication skills (English and Spanish) to effectively interact with a diverse team and workforce * Knowledge of packing equipment is a plus * Freezer knowledge a plus * Strong Sense of Safety * Ability to walk, bend, stoop, reach, squat and lift up to 50lbs is required. * Color Vision required. Food safety and quality responsibilities • Ensure proper functioning of equipment necessary to support proper identification, control, monitoring, and documentation of Critical Control Point, • Ensure quality and safety specifications are met, • Demonstrate food safety and quality, SSOP and GMP policies and procedures ** **Disclaimer: ¨NBSP; **Employee must be able to perform the essential functions of the position satisfactorily and, if requested, reasonable accommodation will be made to enable employees with disabilities to perform the essential functions of their job, absent undue hardship. *Dr. Praeger's Sensible Foods is an Equal Opportunity Employer that does not discriminate on the basis of actual or perceived race, creed, color, religion, alienage or national origin, ancestry, citizenship status, age, disability or handicap, sex, marital status, veteran status, sexual orientation, genetic information, arrest record, or any other characteristic protected by applicable federal, state or local laws. Our management team is dedicated to this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, employee activities and general treatment during employment. You should be proficient in: • OEM (Original Equipment Manufacturing), • PLC Troubleshooting Skills, • Creating Preventive Maintenance Plans, • Electrical Troubleshooting Skills, • Mechanical Troubleshooting Skills, • Troubleshooting Industrial Automation Equipment, • PLC Programming Experience, • PLC Wiring Experience, • Machine Safety Inspections, • Variable Frequency Drives (VFD), • Programmable Logic Controller (PLC) (Allen Bradley, Siemens, Schneider Electric), • Conveyor Systems $35 - $40 / hr

Job Description Goodwill Industries of Greater New York and Northern New Jersey, Inc. Job Description THRIFT STORE SALES SPECIALIST The Role / General Purpose: The Thrift Store Sales Specialist delivers excellent customer service, restocks and replenishes merchandise, and supports Goodwill’s mission. They assist customers, process transactions, maintain store cleanliness, and ensure a positive shopping experience. This role also includes enforcing store policies and supporting daily operations. About Goodwill NYNJ: At Goodwill NYNJ, we empower individuals with disabilities and other barriers to employment to gain independence through the power of work. Founded more than 109 years ago, Goodwill believes in never leaving talent behind and that a positive world is where all talents are recognized. Operating over 30 retail locations, Goodwill is known for its retail stores and is a destination for donating goods – our retail operations make a material, sustainable impact on textile reuse. Join our team and be part of something meaningful. Here, your work creates opportunities for yourself and for others in the community. Job Responsibilities: • Greet and assist customers promptly., • Support donors as needed and direct them to the designated donation drop-off area., • Regularly restock merchandise onto the sales floor, ensuring compliance with Goodwill’s visual standards., • Promote Goodwill’s Rewards and Round-Up programs., • Process sales transactions quickly and accurately., • Resolve customer concerns and escalate issues as needed., • Maintain a clean and organized sales floor, fitting rooms, and checkout area., • Follow store policies, including safety guidelines and occupancy limits when required., • Operate the register and thank customers for their purchases., • Monitor store entry and enforce safety measures if assigned. Flexibility in your availability is essential to meet the needs of the business which operates Monday to Sunday, 9:00am to 8:00pm. Health & Safety Guidelines: This role involves handling pre-owned merchandise, which may contain allergens, dust, or other substances. Goodwill provides training, protective equipment, and follows safety protocols to ensure a clean and secure work environment. Employees must follow all safety guidelines and report concerns to management. Benefits: Goodwill NYNJ offers a variety of benefits to Full-Time employees and Part-Time employees working over 30 hours per week: • Incentives: $500 sign-on bonus for new retail employees & biweekly bonuses for achieving performance targets., • Discounts: Retail Store Discounts - 50% All year long. Additional discounts for travel, entertainment, etc. through Plum Benefits, • Tuition Reimbursement Assistance, • Incentives: $500 sign-on bonus for new retail employees & biweekly bonuses for achieving performance targets., • Medical, Dental, Vision & Voluntary Insurance Offerings, • Generous Paid Time Off: Competitive vacation, sick, parental leave, and personal days with increased accrual over time. Additional generous paid prenatal and parental leave., • Headspace: Free access to hundreds of guided exercises for meditation, sleep, focus, and movement for employees and their loved ones., • $500 employee referral bonus., • Retirement Plans: 403(b) with up to 4% employer match after 1 year of service.

Job DescriptionDescription: AAF International offers the most comprehensive clean air solutions available across the globe. Selling under the American Air Filter® and the AAF International® brand names, AAF International has been an industry pioneer since 1921 with manufacturing operations in 22 countries with over 6000 employees globally. Our products are the industry benchmarks for quality and performance. Our applications include commercial, industrial and residential solutions from the filters used in your home to the most critical cleanroom and power generation applications. We are a member of the Daikin Group, the world's largest air conditioning provider with $30 billion in revenue and over 75,000 employees worldwide. Founded in 1924, Daikin has grown into a diversified industrial manufacturing company offering solutions in clean, air, air conditioning, refrigeration, chemicals, oil hydraulics, defense systems and electronics. Our culture of continuous improvement, safety, and world class operations is driven by our people-centered management philosophy. This philosophy is built around mutual selection: that while AAF seeks top talent people to join and deliver on our team, we also want each team member to receive job satisfaction, growth & development, and continued happiness in being a long-term member of the AAF family. This is fueled by our belief in treating our people, our supply partners, our customers and our environment with the trust and respect we each require, and our passion to give back to our community for our success. Read more about our philosophy at: AAF International is an Equal Opportunity Employer M/F/Disability/Veteran. We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, sex, sexual orientation, gender identity, national origin, citizenship, veteran status, uniform servicemember status, age, disability or any other legally recognized protected personal characteristics. Position Objective: We are currently seeking a well-organized individual with excellent written, verbal, and computer communications skills to join our sales force as a Sales Engineer in the HVAC new construction/plan and specification market for the New York City/Long Island region. Key Accountabilities: The successful candidate will work developing specifications with the professional engineering community, bid, close, and service General, Mechanical, and Sheet Metal Contractors as well as end-users in the territory. Ideally, the candidate will establish a working home office as well as maintain office space in our New Jersey facility. Requirements: Position Requirements: Bachelor's degree, preferably including technical coursework, a familiarity with the plan and specification sales process, and a desire to achieve sales success in the disciplines of HVAC, Process, or Mechanical Equipment. While an engineering degree is not a requirement, candidates with up to (3) years of successful sales experience of mechanical equipment in the field will be strongly considered.

Job Description Electro-Mechanical Assembler 1st Shift Mon-Fri 7 am-3:30 pm (OT - 6 am - 3:30 pm) Effective w/e 11/25/2023, all new starts for Boonton will have a 30% increase to their base pay to cover the clients compensation package. Please inform the contractor that they will lose their 30% increase at conversion but will gain their benefits, including PTO and Holiday pay. This is due to the new law passed in NJ. Position Summary: Responsible for complex and diversified assembly of a variety of products in which mechanical drawings or work instructions are provided. Intricate fitting, adjusting, and aligning of a considerable number of parts (involving close tolerances and interrelated factors) are required to complete products, units, or sub-assemblies. Hand tools and usage of machines will be required to perform the assembly. Follows schedule provided by SAP and management. Position Responsibilities: Assembles and/or wires complex equipment following blueprints, models, and model prints. Skilled adjusting, fitting, and aligning are required within close tolerances. Follows work cell procedures or mechanical drawings and product structures. Sets up, operates, and maintains basic production machines such as component engravers, presses, crimpers, riveting or encapsulation machines. Is flexible and able to perform many operations on product in and outside of home department. Uses hand and power tools as required. Builds harness assemblies. Light usage of computers to monitor and report job status and component availability. Will need to be able to open prints or work instructions from system and write to excel or SAP databases. May perform thru-hole PCB assembly. Performs related duties as assigned by Supervisor. Works overtime as required. Strives to meet prescribed quality standards in an ISO environment. Follows proper use of PPEs to promote a safe work environment and performs 5S steps to ensure clean, hazard-free, and efficient work area. Skills and Experience Required: Minimum of 1-3 years electro-mechanical assembly experience. Mechanical assembly with electronic/electrical safety knowledge is acceptable. Ability to read blueprints and schematics; read and identify proper components and color schemes. Must present excellent workmanship standards. Must have good verbal communication skills.

Job Description Position Overview TDS is currently seeking a dependable, adaptable and skilled individual possessing hands-on experience in fieldwork. This role entails supporting a diverse array of tasks related to deployment, including but not limited to the construction of containment structures, assembly of cable tray structures, installation of low voltage cabling, rack and stack operations, and labeling. Responsibilities • Construct containment structures, • Build ladder rack structures, • Assist with the installation and maintenance of low voltage cabling (Cat6, Fiber), • Support the setup of data center infrastructure, including racks, cable management, and device mounting, • Perform labeling and basic troubleshooting tasks, • Collaborate with team members to ensure deployment tasks are completed on schedule, • Maintain a clean, organized, and safe work environment, • Demonstrated reliability and punctuality are essential, • Ability to follow instructions and quickly adapt in the field, • Scissor lift operator license is highly desirable, • Experience with low voltage cabling (LVC) or data center operations is advantageous, • Comfortable working with ladders, power tools, and lifting weights up to 50 lbs Job Type: Temporary, 6-12 Weeks Pay: $25-$35 per hour Benefits: • Competitive compensation with opportunities for advancement, • Training and development programs for motivated individuals, • Potential for progression into team lead roles or specialized deployment teams Ability to Commute:

Job DescriptionAce Handyman Services (AHS), an ACE Hardware company is one of New Jerseys top-rated handyman, repair, and remodeling companies and have provided homes and businesses throughout New Jersey with quality craftsmanship for their handyman needs. Our customer service commitment includes professional handyman services providing white glove treatment, an office team to schedule work, exact appointment times versus appointment windows, employee background checks, company insurance, superior craftsmanship and a 1 year guarantee on all work. We are currently seeking a reliable, highly motivated professional Craftsman/Woman with skills in multiple trades and leadership capability. Apply to join our team at the new, soon to be opened locally owned franchise, Ace Handyman Services North Jersey. Its time to stop chasing projects and build your career. Job Benefits • Monday through Friday work week (8am to 5pm) - No weekend work unless you want to have scheduled., • Fun, collaborative, positive work environment., • Advancement into a well-paying lifelong career., • Very competitive pay, performance bonuses, • W-2 status. Full Time or Part Time, • Vehicle and tool allowances, • Benefits, • Office team to keep you booked, on-time and organizedJob Duties The AHS Craftsman effectively uses hand tools, power tools and diagnostic equipment. He/She is a professional with excellent customer service skills and desires to supervise other employee(s). He/She has demonstrated ability as a competent craftsman. Job Responsibilities • Perform all types of quality handyman repairs, • Carpentry, • Drywall repair, • Painting, • Tile work, • Basic plumbing and electrical, • Project Estimating, • Take pride in doing it right the first timeQualifications, • 5+ years of Craftsman experience, • Valid drivers license, auto insurance, own a truck/van, • Have a solid, organized set of tools, • Strong work ethic and professional demeanor. Clean-Cut appearance, • Must be a quick thinker, able to examine issues and resolve them in a prompt and professional manner., • Excellent customer service skills - able to communicate effectively with Management, Office Personnel, Fellow Employees, Homeowners, Suppliers, Property Managers and Commercial Customers., • Collaborative, optimistic, reliableCraftsman Benefits:, • Monday through Friday work week (8 am to 5 pm) - No weekend work unless you want to schedule., • Positive work environment., • Advancement into a well-paying lifelong career., • Locally owned company with the backing of a national brand, Ace Hardware., • Very competitive pay, performance bonuses, • W-2 status with the flexibility of an independent job, • Vehicle and tool allowances, • Fun, collaborative environmentOther, • Look around the property and communicate to the customer things you could repair or things that our company can handle., • Take the time to earn the customers confidence and then inquire about additional work that could be performed., • Sometimes, take the time to fix something small and then point it out to the customer to help them understand that youu are capable of doing more., • Someone who is punctual and efficient maintains the highest integrity and strives for top customer satisfaction., • Enjoys being an Integral part of a winning team., • Demonstrates ability and willingness to EXCEED Customers' expectations.

Job DescriptionAce Handyman Services (AHS), an ACE Hardware company is one of New Jerseys top-rated handyman, repair, and remodeling companies and have provided homes and businesses throughout New Jersey with quality craftsmanship for their handyman needs. Our customer service commitment includes professional handyman services providing white glove treatment, an office team to schedule work, exact appointment times versus appointment windows, employee background checks, company insurance, superior craftsmanship and a 1 year guarantee on all work. We are currently seeking a reliable, highly motivated professional Craftsman/Woman with skills in multiple trades and leadership capability. Apply to join our team at the new, soon to be opened locally owned franchise, Ace Handyman Services North Jersey. Its time to stop chasing projects and build your career. Job Benefits • Monday through Friday work week (8am to 5pm) - No weekend work unless you want to have scheduled., • Fun, collaborative, positive work environment., • Advancement into a well-paying lifelong career., • Very competitive pay, performance bonuses, • W-2 status. Full Time or Part Time, • Vehicle and tool allowances, • Benefits, • Office team to keep you booked, on-time and organizedJob Duties The AHS Craftsman effectively uses hand tools, power tools and diagnostic equipment. He/She is a professional with excellent customer service skills and desires to supervise other employee(s). He/She has demonstrated ability as a competent craftsman. Job Responsibilities • Perform all types of quality handyman repairs, • Carpentry, • Drywall repair, • Painting, • Tile work, • Basic plumbing and electrical, • Project Estimating, • Take pride in doing it right the first timeQualifications, • 5+ years of Craftsman experience, • Valid drivers license, auto insurance, own a truck/van, • Have a solid, organized set of tools, • Strong work ethic and professional demeanor. Clean-Cut appearance, • Must be a quick thinker, able to examine issues and resolve them in a prompt and professional manner., • Excellent customer service skills - able to communicate effectively with Management, Office Personnel, Fellow Employees, Homeowners, Suppliers, Property Managers and Commercial Customers., • Collaborative, optimistic, reliableCraftsman Benefits:, • Monday through Friday work week (8 am to 5 pm) - No weekend work unless you want to schedule., • Positive work environment., • Advancement into a well-paying lifelong career., • Locally owned company with the backing of a national brand, Ace Hardware., • Very competitive pay, performance bonuses, • W-2 status with the flexibility of an independent job, • Vehicle and tool allowances, • Fun, collaborative environmentOther, • Look around the property and communicate to the customer things you could repair or things that our company can handle., • Take the time to earn the customers confidence and then inquire about additional work that could be performed., • Sometimes, take the time to fix something small and then point it out to the customer to help them understand that youu are capable of doing more., • Someone who is punctual and efficient maintains the highest integrity and strives for top customer satisfaction., • Enjoys being an Integral part of a winning team., • Demonstrates ability and willingness to EXCEED Customers' expectations.

Job Description Job Description: We are looking for a skilled and detail-oriented Vehicle Accessories Installer to join our team. In this role, you will be responsible for installing a wide range of automotive accessories including electronics, lighting upgrades, running boards, push bumpers, audio equipment, and more. If you're mechanically inclined, take pride in quality workmanship, and enjoy working with vehicles, we want to hear from you! Responsibilities: • Install aftermarket accessories on new and used vehicles, • Perform pre- and post-installation inspections, • Troubleshoot and resolve any issues during installation, • Maintain a clean and organized work area, • Ensure all work meets dealership and safety standards, • Collaborate with service and sales departments to meet customer deadline Qualifications: • Prior experience in accessory installation or general automotive work preferred, • Basic mechanical and electrical knowledge, • Ability to use hand and power tools safely and effectively, • Attention to detail and commitment to quality, • Valid driver's license and clean driving record, • Ability to lift up to 50 lbs and work on your feet for extended periods We Offer: • Competitive Pay, • Health, dental, and vision insurance, • 401k, • Free College Education, • Paid time off and holidays, • Ongoing training and advancement opportunities