Trabajos commercial plumbing en Elizabeth, New JerseyCrear alertas

Job DescriptionBenefits: • Competitive salary, • Free uniforms, • Paid time off We are looking for a skilled and experienced technician to join our team! HVAC/R Technicians install, maintain, repair and overhaul various types of equipment, including refrigeration systems, heating and cooling systems, and commercial kitchen equipment. A team player who is comfortable working independently, loves the feeling of a job well done, and takes pride in completing customer jobs with efficiency. A positive attitude is a must! Responsibilities: • Perform preventative maintenance, corrective maintenance and installation of refrigeration, heating, air conditioning, and ventilation and plumbing applications., • Install, maintain, and repair package units, split systems, boilers and other mechanical equipment., • Install, repair, and maintain light commercial rooftop units, boilers, controls, and other mechanical equipment., • Maintain all ventilation systems including preventative maintenance tasks and rebuilding of equipment when need., • Perform repairs and installation on HVAC/R equipment and commercial kitchen equipment for residential and commercial customers., • Perform maintenance and repair of HVAC/R equipment for commercial and residential applications including commercial refrigeration equipment., • Demonstrate strong knowledge of refrigeration systems, walk in refrigeration/freezer units and some experience on centrifugal and rotary screw compressor chillers., • Validate laboratory air flows to meet OSHA safety requirements., • Conduct a wide range of repairs in accord with OSHA regulations., • Plumb and connect all necessary PVC piping to drain condensation from the evaporative coil., • solder, pipe-fitting, blue print reading, climbing ladders, digging ditches, preparing pipes and fittings, cleaning, • Work on motor controls, pneumatic controls, chillers, high pressure steam, pumps, valves, piping, etc., • Service residential and commercial plumbing equipment., • Perform minor electrical and plumbing repairs., • Replace and repair malfunctioned/defective HVAC equipment, troubleshoot electrical components and wiring. Qualifications: • Past experience as an HVAC service technician, • Refrigeration experience, • Valid Drivers License, • EPA Certification, • Experience with operation and maintenance of chillers, heat pumps, air handlers, and geothermal systems, • Ability to climb ladders, crawl, and lift 40 pounds, • Ability to work after hours, over weekends and on public holidays with short or no notice, • Ability to work in confined spaces, • Excellent written, verbal and interpersonal skills, • Reliable mode of transportation

Job Description Together We Build – Partnership, Innovation, Excellence, and Safety At Kelso Industries, 3,500+ employees across 30 companies work together to deliver exceptional HVAC, mechanical, plumbing, refrigeration, and electrical solutions nationwide. Join us to grow your career, make an impact, and be part of a team where innovation, excellence, and safety come first. Recruiter Notice: We respectfully ask external recruiters and staffing agencies not to submit candidates. We only accept direct applications. Supreme Heating & Air Conditioning is hiring HVAC Installers/Mechanics to join our growing team. We are looking for hardworking professionals who take pride in quality workmanship and want to build a long-term career with a well-established HVAC company. Responsibilities: • Install residential and commercial HVAC systems, • Install ductwork, piping, and equipment, • Read blueprints and installation drawings, • Perform system startups and testing, • Maintain a safe and professional work environment Qualifications: • 5-7 years Residential HVAC installation experience, • Experience removing old systems and installing new systems, • Ability to communicate professionally with customers, • Knowledge of current HVAC codes, • Ability to lift and move heavy equipment, • Measure and install ductwork, • Basic electrical knowledge, • Comfortable working in hot and cold environments, • Strong mechanical aptitude Ability to work independently and as part of a team, • EPA Certification a plus GREAT BENEFITS WHICH INCLUDE, HEALTH AND DENTAL INSURANCE, 401K PLAN, PERSONAL DAYS, AND VACATION TIME! Why Join Kelso Industries? Join us and be part of a team dedicated to creating efficient, sustainable, and high-performance environments that make a lasting impact across the industrial, commercial, and institutional sectors. Here you will experience: Growth Opportunities: Develop new skills, take on exciting challenges, and advance your career in meaningful ways. Company Culture: You'll thrive in an environment that supports your growth, values your contributions, and makes work fulfilling and enjoyable. Impact: Your work directly contributes to meaningful outcomes, allowing you to see the difference you make and feel a sense of purpose every day. Competitive Compensation & Benefits: You'll be rewarded fairly for your contributions while enjoying perks that enhance your financial security, health, and overall well-being. Kelso Industries celebrates diversity and is committed to creating an inclusive environment for all employees. We do not discriminate in any aspect of employment based on race, color, religion, national origin, ancestry, gender, sexual orientation, gender identity and/or expression, age, veteran status, disability, or any other characteristic protected by federal, state, or local employment discrimination laws where Kelso does business

Job DescriptionHaddad Plumbing and Heating Inc. is seeking a HVAC Service Technician to join our team. The HVAC Service Technician will support the HVAC department by preforming preventative, corrective, and predictive maintenance, troubleshooting and service of commercial and industrial HVAC systems. HVAC Technician performs tests and analysis of data to assure the proper functioning of equipment and provides recommendations as appropriate. Essential Functions • Perform maintenance and service repairs, install new units or replace parts for existing units according to specifications., • Perform preventative maintenance and repair of commercial HVAC equipment as needed., • Inspect equipment and perform diagnostics on equipment to identify potential problems to prevent premature and unexpected breakdowns or callbacks., • Communicate with dispatch to ensure completion of scheduled job., • Responsible for delivery and removal of parts and equipment needed to complete service work., • Generate work orders that address deficiencies in need of correction., • Adhere to safety standards and protocols while performing all job duties., • Uses and maintains appropriate personal protective equipment (PPE) as prescribed by the company.Education, Qualities & Skills Required, • High school diploma or equivalent, • Must have OSHA 10 or 30, • 5 years of HVAC maintenance and repair experience., • Skilled at servicing heating, air conditioning, and ventilation equipment as well as related accessories., • Effective communication skills to communicate with customers and resolve customer issues, complaints, or concerns., • Be familiar with a wide range of equipment and troubleshooting techniques., • Ability to show up to work on time and commitment to performing high quality work, • Valid NJ Driver’s License with a clean driving record.Compensation $20 - $25 Hourly Position Type and Expected Hours of Work This is a full-time position, Monday – Friday 7:00 am – 3:30 pm and Saturdays as needed per job. About Haddad Plumbing and Heating Inc.: Haddad Plumbing and Heating Inc. is a Commercial Plumbing and HVAC company dedicated to: Providing premier workmanship and consistent delivery of reliable plumbing, heating and HVAC systems. We deliver expertise and professionalism in a competitive marketplace, using innovative techniques and tools to enhance productivity and efficiency, and meet crucial deadlines. Our ultimate goal is deliver better cost returns that will deliver greater value. When Haddad Plumbing & Heating Inc. is awarded a new construction project, our managers apply their expertise to present a comprehensive proposal that meets all requirements. Our in-house drafters then create technical designs and plans to be used by construction engineers. Project managers work closely with the general contractor and team of supervisors to ensure that the project remains on schedule without sacrificing quality work. Finally, our team of project managers with plumbing and HVAC supervisors coordinate when and how plumbing and HVAC systems are synergized and implemented. With all projects, our goal is to earn our clients’ trust to be their plumbing and HVAC contractor of choice, now and in the future. Our success is measured by achieving our clients’ vision and objectives for the project, but going above and beyond their expectations as guided by our core values. Here at Haddad Plumbing and Heating Inc., we earn this privilege with our clients by providing best-in-class service, value, and quality in every project. Haddad Plumbing and Heating Inc. includes benefits such as health care, paid time off and retirement savings. Powered by JazzHR mz1nUuDzdg

Job DescriptionHaddad Plumbing and Heating Inc. is seeking a HVAC Helper to join our team. The HVAC Helper will support the HVAC department by preforming Plumbing and HVAC work and assisting Plumbing / HVAC mechanics with daily tasks and projects Essential Functions • Assist with the Installation, repair and maintenance of all plumbing systems including but not limited to drainage, waste, vent, gas and flue piping, fixtures, faucets, tub & shower valves and water heaters., • Assist with the Installation, repair and maintenance of all HVAC systems including but not limited to hydronic boilers, steam boilers, hot air furnaces, air conditioning systems, piping, controls and ductwork., • Keep the mechanics vehicle organized, stocked with material and clean., • Review and complete assigned training curriculum., • Have hand tools as required by the company., • Wear PPE as established by the company guidelines, • Any other tasks as assigned managerEducation, Qualities & Skills required, • Must have a OSHA 10 or 30, • Organizational and multitasking abilities, • Active listener with excellent communication skills, • Sound judgment and critical thinking, • Professional behavior and conduct, • Must be able to work well individually and with a team.Compensation Starts at $17 Hourly with no experience Position Type and Expected Hours of Work This is a full-time position, Monday – Friday 7:00 am – 3:30 pm and Saturdays as needed per job. About Haddad Plumbing and Heating Inc.: Haddad Plumbing and Heating Inc. is a Commercial Plumbing and HVAC company dedicated to: Providing premier workmanship and consistent delivery of reliable plumbing, heating and HVAC systems. We deliver expertise and professionalism in a competitive marketplace, using innovative techniques and tools to enhance productivity and efficiency, and meet crucial deadlines. Our ultimate goal is deliver better cost returns that will deliver greater value. When Haddad Plumbing & Heating Inc. is awarded a new construction project, our managers apply their expertise to present a comprehensive proposal that meets all requirements. Our in-house drafters then create technical designs and plans to be used by construction engineers. Project managers work closely with the general contractor and team of supervisors to ensure that the project remains on schedule without sacrificing quality work. Finally, our team of project managers with plumbing and HVAC supervisors coordinate when and how plumbing and HVAC systems are synergized and implemented. With all projects, our goal is to earn our clients’ trust to be their plumbing and HVAC contractor of choice, now and in the future. Our success is measured by achieving our clients’ vision and objectives for the project, but going above and beyond their expectations as guided by our core values. Here at Haddad Plumbing and Heating Inc., we earn this privilege with our clients by providing best-in-class service, value, and quality in every project. Haddad Plumbing and Heating Inc. includes benefits such as health care, paid time off and retirement savings. Powered by JazzHR zInpfVSPuc

Job DescriptionCompany Description Uncommon Schools is a nonprofit network of high-performing public charter schools dedicated to providing an exceptional K-12 education in economically disadvantaged communities. Operating in Boston, Camden, New York City, Newark, and Rochester, we are committed to closing the college completion gap and preparing every student for college and beyond. Our students consistently exceed national benchmarks, reflecting our dedication to their success. We invest deeply in our educators, offering weekly coaching, feedback, and professional development to ensure excellence in teaching and leadership. Join us to work hard, do good, and make a lasting difference! Job Description Uncommon Schools is seeking a Senior HVAC Technician (Snr HVAC Tech) to join the charter network’s New Jersey Facilities team. This position provides an opportunity for an experienced HVAC technician with at least seven (7) years' relevant experience to work with a dedicated facilities group, deepen his/her technical skills, and help ensure that Uncommon provides well-maintained, comfortable, and safe educational facilities for our students and staff. Uncommon’s portfolio in New Jersey comprises buildings constructed from the very early 1900s through the early 2020s, operating HVAC systems dating from 1966 to the recent past few years. As ambient comfort is essential to a productive learning and teaching environment, the impact of this individual’s attentiveness will be felt and deeply appreciated across the region. Reporting to the Senior Manager, Facilities Management Team, the HVAC Service Technician will perform all technical work necessary to inspect, maintain, repair, and modify HVAC system in our buildings. With expertise in HVAC – and to a lesser extent in construction and plumbing – in multi-family, schools, and commercial buildings, the successful candidate will be responsible for conducting minor HVAC projects and managing larger ones and ensuring they are completed on time and within budget. The HVAC Service Tech will partner with senior Facilities team members and outside consultants on the planning, coordination, and supervision of mechanical construction and repair activities implemented by outside vendors, will ensure project timelines are met and ensure quality control standards are followed, mentor junior staff, and handle all HVAC-related communication with stakeholders. Uncommon values candidates who have the drive and ability to work hard, are highly self-motivated, are eager to take on and implement assignments and projects, and have a strong commitment to customer service and satisfaction. Safe, efficient, healthy, clean, comfortable, and reliable buildings are essential to Uncommon’s mission to deliver an excellent education to our students and a comfortable working environment to our dedicated staff. As a member of the NJ Facilities Team, the HVAC Service Technician will • maintain current knowledge of the National Standard HVAC Code and other applicable building codes and perform all facets of the HVAC trade in accordance with those codes and in a safe and effective manner, • diagnose problems with HVAC systems, evaluate solutions to remedy issues, and provide sound recommendations to supervisors, • in emergency situations take immediate steps to contain the problem and restore the system to sound working condition, • in emergency situations maintain clear and consistent communication with stakeholders to apprise them of steps being taken to address the issue, • troubleshoot and repair all HVAC type systems currently available in the market, • maintain records of corrective and preventive work assignments received through an automated work order system (currently SchoolDude, soon ZenDesk), • assist onsite Facilities Managers and General Maintenance Workers with work projects or special assignments, • respond to campus emergency calls after hours as needed, • perform other duties as assignedQualifications Required Technical Skills: • Significant journeyman-level HVAC experience along with the trade knowledge to effectively understand and perform all facets of the HVAC trade in accordance with the National Standard Plumbing Code and other applicable codes, • Strong background in commercial heating projects large and small, including hot water boilers and gas furnaces, • Ability to read as-built plans for all buildings in portfolio, • Ability to read and interpret construction drawings, specifications, submittals, cut sheets, layouts, technical manuals, schematic drawings, and other HVAC-related trade documents, • Advanced knowledge of BMS systems and system operations, • Ability to procure replacement parts as needed to make all necessary repairs, • Ability to properly and safely use the tools of the trade and carry out all tasks expected of a Snr. HVAC Technician, • Ability to troubleshoot and repair refrigerant-driven cooling and heating equipment (heat pump systems), • Ability to troubleshoot and repair water-driven heating and cooling equipment, • Ability to troubleshoot and repair water or glycol pump systems, • Ability to troubleshoot and service chillers and cooling towers, • Ability to change filters and belts and clean coils as needed to ensure proper functioning of units, • Ability to troubleshoot and implement recommended repair/replacement of, • gas valves, • economizer motors and dampers, • compressors and contactors, • dampers, • chilled water and hot water pumps, • glycol injection units, • Ability to evacuate and top-off units with refrigerant General Technical Skills • Bachelor’s Degree equivalent or seven plus (7+) years of experience in the HVAC field, • Evidence of progressive responsibility and experience in HVAC field, with four plus (4+) years as head technician, • Ability to handle multiple projects simultaneously, • Familiarity with key building systems (HVAC, electrical, mechanical, plumbing), • Familiarity with OSHA and other Life Safety codes, etc., • Computer skills necessary to operate BMS system, • Facility with Microsoft office suite, • Strong organizational skills, attention to detail, and follow-through, • Ability to communicate effectively verbally and electronically with facilities staff, school staff, and vendors, • Available to work nights and weekends when necessary, • Extreme flexibility, with a strong work ethic and an entrepreneurial spirit to accommodate high level of responsibility and multiple priorities, • New Jersey low pressure black seal boiler, HVAC or other certificate, training, or licenses a plus, • Carry a current EPA card enabling technician to dispense of refrigerants, • Valid driver’s license and vehicle, • Strong capacity to operate independently Physical Requirements • The physical requirements outlined below are representative of those that must be met by an employee to successfully perform the essential functions of this position., • Stand or walk for up to two (2) hours at one time, up to eight (8) hours per day, • Sit for fewer than two (2) hours during an eight (8)-hour day, • Lift or carry up to 35 pounds frequently and 100 pounds occasionally, • Lift up to 100 pounds to waist height and up to 35 pounds in a range of motions from floor to overhead, • Frequently use hands for simple grasping, fine manipulation, pushing or pulling, • Occasionally climb stairs or ladders, dig, or pull with forces up to 100 pounds, • Frequently bend, squat, kneel, knee stand, lift overhead, reach overhead, push, or pull, • Work outdoors in a variety of temperatures and environmental conditions, • Possess ability to work at heights, full range of body motions and physical agility, and ability to maintain balance Mission Alignment • Demonstrate a relentless drive to improve the minds and lives of students in and out of school, • Demonstrate a commitment to the schools’ rules, regulations, and safety procedures, • Implement and enhance the school’s systems and culture Create high accountability for oneself as well as for building staff and vendors #ZR Additional Information Our people are what make us Uncommon. We offer competitive compensation and comprehensive benefits that support the personal health, wellness, and finances of our staff and their families. Our compensation philosophy values equity & fairness and attracting & retaining top talent. Compensation Compensation for this role is between $43/hr to $50/hr. Starting pay is determined using various factors including but not limited to relevant professional experience, education, certifications, and tenure with Uncommon Schools. Benefits • Regional staff will have the same holidays and sustainability days as school-based staff in their region, and flexible summer PTO, • Extensive, best-in-class training and development, • Comprehensive health, dental, and vision insurance plans + pre-tax flexible spending (FSA), dependent care (DCFSA), and health saving accounts (HSA), • Financial Planning, • New Jersey Pension program, • Paid leave of absence options (parental, medical, disability, etc.), • Mental health and counseling support + wellness benefits *A detailed list of all benefits is located HERE. At Uncommon, we believe that a supportive and welcoming environment helps our students, staff, and community thrive. We are dedicated to building a team that brings a wide range of perspectives and experiences, reflective of the communities we serve---with over 70% of our staff identifying as people of color. Our organization values respect and open dialogue on important topics that shape our school culture. As an equal opportunity employer, Uncommon provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. We also ensure that individuals with disabilities receive all privileges and benefits associated with employment and are provided reasonable accommodations for the interview process and to perform core job functions. If you would like to request an accommodation, please email recruitment@uncommonschools.org.

Job Description Are you a Certified HVAC/Refrigeration Technician looking for a place to build your career - not just another job? We are looking a Journey Level Refrigeration Technician for full-time, year-round commercial service work in and around the Newark, NJ area. Looking for the right job is tough. Come join us, and you won't need to look again! We are seeking career-minded techs who are ready to start their last job and enjoy the work/life balance we offer for years to come! With full benefits, paid holiday/sick/vacation time, room for growth, and team that has your back, this is the place for you! Apply now! RESPONSIBILITIES: · Maintain, diagnose, and repair multiple types of refrigeration systems, as well as all mechanical and electrical components related to the equipment (such as self-contained coolers and freezers, single and rack systems, etc.) · Perform minor plumbing repairs on refrigeration equipment, including walk-in drain lines, case drain lines, cooling towers and water-cooled condensers · Inspect plumbing, electrical, and refrigeration systems and identifying specifications that are required · Perform preventative maintenance and repairs for HVAC and Refrigeration · Collaborate directly with grocery store managers and store directors · Quote equipment repairs and recommend replacement when necessary · Maintain proper van stock, tools and safety equipment on work van SKILLS: · Good judgement for use of supplies and materials in refrigeration repairs · Attention to detail and critical analysis for diagnostics and work performed · Professional communication skills · Mechanical aptitude QUALIFICATIONS: · 2+ years prior HVAC/R experience · Be available for ON CALL work as needed · Ability to pass a physical/drug screen/background investigation/ driving abstract as needed BONUS POINTS: · Universal EPA License • Electrical License · 2-3 years of grocery refrigeration / HVAC experience · Related education/certification in HVAC and refrigeration industry It's time you take the first step into your last job! If you're done wasting time in the wrong place, apply now!

Job Description Commercial Superintendent – New Jersey (Multi-Property Portfolio) We are seeking an experienced Commercial Superintendent to oversee the day-to-day operations and maintenance of a portfolio of commercial properties throughout New Jersey. This role is responsible for ensuring all buildings are well-maintained, systems are operating efficiently, and tenant needs are addressed promptly and professionally. Key Responsibilities: • Oversee maintenance, repairs, and overall building operations across multiple commercial properties, • Coordinate and supervise vendors, contractors, and on-site staff, • Perform regular property inspections and ensure compliance with safety and building regulations, • Manage preventative maintenance programs for HVAC, electrical, plumbing, and other systems, • Respond to tenant service requests and ensure timely resolution, • Assist with capital improvement projects, renovations, and build-outs, • Maintain budgets, track expenses, and support cost control initiatives, • Ensure properties are clean, safe, and operating at a high standard Qualifications: • 5+ years of experience in commercial building maintenance or property operations, • Strong knowledge of building systems (HVAC, electrical, plumbing), • Experience managing multiple properties or a portfolio preferred, • Ability to coordinate vendors and manage projects, • Strong communication and organizational skills, • Valid driver’s license and ability to travel between properties in New Jersey Salary: $80,000 to $100,000

Warehouse Associate Position This is a great company and role for the right candidate. A Family-Owned, extremely stable, and fast-growing company is looking for an experienced commercial Warehouse Associate with experience working in the plumbing industry. This company is looking to interview and hire immediately. Position Type: Full-time Permanent/Swing shift Location: Staten Island, NY Reports to: Warehouse Associate Compensation: Strong hourly rate plus overtime!!! Benefits: Benefits: Strong PTO days + Medical. Dental, Vision and 401k soon Responsibilities Order Picking and Loading • Pick and stage customer orders using manual pick tickets and ERP systems., • Verify item numbers, sizes, quantities, and descriptions., • Inspect products for damage and ensure proper packaging., • Load delivery vehicles safely and efficiently. Warehouse Organization • Maintain a clean, organized, and accessible warehouse., • Rotate inventory using FIFO practices., • Clearly label and store products to support efficient picking. Receiving and Inventory Put-Away • Receive, inspect, and verify inbound shipments against packing slips., • Identify and report discrepancies or damaged materials., • Unload trucks and place inventory in designated locations., • Stage inbound material tied to specific sales orders with proper labeling. Quality Control • Double-check outbound orders for accuracy and completeness., • Correct errors before shipment., • Escalate recurring issues to management. Safety • Follow all warehouse safety procedures., • Safely operate equipment such as pallet jacks, forklifts, and hand trucks., • Complete daily equipment checks and report issues., • Use required PPE and report safety hazards immediately. Required Qualifications • Prior warehouse experience in a plumbing supply or wholesale distribution environment is required., • Strong understanding of plumbing products, sizes, and materials., • Ability to lift up to 50 lbs and remain on your feet for extended periods., • High attention to detail and accuracy., • Experience using ERP or inventory systems preferred., • Forklift experience or willingness to obtain certification., • High school diploma or equivalent. Work Environment • Warehouse setting with temperature and noise variability., • Physical work including standing, walking, bending, and lifting., • Strict adherence to safety standards is required.

Drive Growth Across MEP Services and Manufacturing in a Top-Tier Contracting Firm! Base + Sign on bonus! This Jobot Job is hosted by: Chris Gorman Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $100,000 - $120,000 per year A bit about us: We are a leading MEP contracting firm serving the commercial, industrial, refrigeration, and nuclear industries that has grown into a multi-discipline, multi-market MEP powerhouse with a team of 500+ skilled professionals. Our commitment lies in delivering quality solutions to our clients, fostering professional growth among our employees, and making a positive impact in our communities. Due to growth, we are looking to add a Plumbing Design Coordinator to our team in IL. Why join us? What We Offer: • Competitive base salary and overall compensation package, • Full benefits: Medical, Dental, Vision, • Generous PTO, vacation, sick, and holidays, • Life Insurance coverage, • 401 (K) Job Details Responsibilities: • Design and coordinate plumbing systems for various projects, ensuring compliance with all relevant regulations and standards., • Utilize AutoCAD, Revit, Navisworks, and BIM to create detailed design plans and models., • Collaborate with project teams, including engineers, architects, and construction professionals, to ensure the seamless integration of plumbing systems into overall project designs., • Perform complex calculations related to plumbing design and systems., • Review and interpret blueprints, plans, and other design documents., • Participate in project meetings, providing expert input on plumbing design and coordination., • Troubleshoot and resolve design-related issues that arise during the construction process., • Keep abreast of the latest developments and technologies in the field of plumbing design and coordination. Qualifications: • High School diploma or GED required; college degree preferred., • 4+ years of experience in plumbing design and coordination, preferably within the Engineering industry., • Proficiency in AutoCAD, Revit, and Navisworks., • Strong knowledge of plumbing systems and related regulations and standards., • Excellent technical drawing and design skills., • Ability to manage multiple projects simultaneously and meet tight deadlines., • A strong commitment to safety and compliance. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job DescriptionHaddad Plumbing and Heating Inc. is seeking an experienced Warehouse Associate to join our team at our headquarters in Newark, New Jersey. The Warehouse Associate will perform an array of functions that may include receiving and processing incoming stock and materials, picking and filling orders from stock, packing and shipping orders, or managing, organizing and retrieving stock in the warehouse. Responsibilities: • Receive and process incoming merchandise., • Organize and store merchandise in designated locations., • Conduct regular inventory checks., • Retrieve and prepare orders and parts as required., • Collaborate with management to address and resolve order discrepancies., • Work with management to resolve inventory and stock issues. Required Education and Experience • Must have OSHA 10, • Capable of lifting up to 50 pounds, • Proficient in reading and interpreting numerical data, • Skilled in following instructions accurately, • Minimum of one year of experience in stocking or warehouse operations, • Knowledgeable about safety protocols in a warehouse setting, • Demonstrates effective teamwork skillsCompensation: $16 - $18 Hourly Position Type and Expected Hours of Work This is a full-time position Monday – Saturday; 7:00 am – 3:30 pm. Arrangements for flexibility of schedule on Saturday’s will be arranged with Supervisor About Haddad Plumbing and Heating Inc.: Haddad Plumbing and Heating Inc. is a Commercial Plumbing and HVAC company dedicated to: Providing premier workmanship and consistent delivery of reliable plumbing, heating and HVAC systems. We deliver expertise and professionalism in a competitive marketplace, using innovative techniques and tools to enhance productivity and efficiency, and meet crucial deadlines. Our ultimate goal is deliver better cost returns that will deliver greater value. When Haddad Plumbing & Heating Inc. is awarded a new construction project, our managers apply their expertise to present a comprehensive proposal that meets all requirements. Our in-house drafters then create technical designs and plans to be used by construction engineers. Project managers work closely with the general contractor and team of supervisors to ensure that the project remains on schedule without sacrificing quality work. Finally, our team of project managers with plumbing and HVAC supervisors coordinate when and how plumbing and HVAC systems are synergized and implemented. With all projects, our goal is to earn our clients’ trust to be their plumbing and HVAC contractor of choice, now and in the future. Our success is measured by achieving our clients’ vision and objectives for the project, but going above and beyond their expectations as guided by our core values. Here at Haddad Plumbing and Heating Inc., we earn this privilege with our clients by providing best-in-class service, value, and quality in every project. Haddad Plumbing and Heating Inc. includes benefits such as health care, paid time off and retirement savings. Powered by JazzHR Rvrh9hGhmQ

Company Description 100+ year-old family-owned Industrial PVF wholesale distributor. Role Description This is an on-site, full-time role for an Inside Sales professional located in Hillside, NJ. The Inside Sales Representative will be responsible for assisting customers with their inquiries, providing product knowledge and recommendations, processing orders, preparing quotes, and maintaining strong customer relationships. Experience in commercial PVF/Heating is preferable. Qualifications • Experience in sales, customer service, or related fields, • Strong communication and interpersonal skills for providing excellent customer support and building client relationships, • Knowledge of plumbing supplies, commercial boilers, hot water, PVF, system design, • Proficiency in using sales and inventory management systems, computers, and standard office software, • Ability to work effectively in a fast-paced environment and handle multiple priorities, • Problem-solving skills and attention to detail

Job DescriptionHaddad Plumbing and Heating Inc. is seeking a Plumber to join our team. The Plumber will support the Plumbing department by performing Plumbing work and assist the forman on daily tasks and projects. Essential Functions • Install commercial and multi-unit residential plumbing systems with precision and expertise., • Implement commercial and multi-unit residential hydronic heating systems efficiently., • Test pipe systems and fixtures for leaks to ensure system integrity., • Interpret blueprints and project layouts effectively for accurate installations., • Identify and utilize necessary tools and special equipment for each job., • Complete required paperwork accurately and promptly within deadlines., • Maintain company-issued vehicle, tools, and equipment to ensure optimal performance., • Uphold company core values of integrity, excellence, teamwork, and innovation consistently., • Travel between job sites and the main office as needed., • Perform additional related duties as assigned by management.Education, Qualities & Skills required, • Five years of plumbing experience., • OSHA 10 Certification, • Strong organizational and multitasking skills., • Effective communication and active listening abilities., • Sound judgment and critical thinking., • Consistently professional behavior and conduct. Compensation Starts at $25 Hourly Position Type and Expected Hours of Work This is a full-time position Monday – Saturday 7am-3:30pm. Arrangements for flexibility of schedule on Saturday’s will be arranged with Supervisor. About Haddad Plumbing and Heating Inc.: Haddad Plumbing and Heating Inc. is a Commercial Plumbing and HVAC company dedicated to: Providing premier workmanship and consistent delivery of reliable plumbing, heating and HVAC systems. We deliver expertise and professionalism in a competitive marketplace, using innovative techniques and tools to enhance productivity and efficiency, and meet crucial deadlines. Our ultimate goal is deliver better cost returns that will deliver greater value. When Haddad Plumbing & Heating Inc. is awarded a new construction project, our managers apply their expertise to present a comprehensive proposal that meets all requirements. Our in-house drafters then create technical designs and plans to be used by construction engineers. Project managers work closely with the general contractor and team of supervisors to ensure that the project remains on schedule without sacrificing quality work. Finally, our team of project managers with plumbing and HVAC supervisors coordinate when and how plumbing and HVAC systems are synergized and implemented. With all projects, our goal is to earn our clients’ trust to be their plumbing and HVAC contractor of choice, now and in the future. Our success is measured by achieving our clients’ vision and objectives for the project, but going above and beyond their expectations as guided by our core values. Here at Haddad Plumbing and Heating Inc., we earn this privilege with our clients by providing best-in-class service, value, and quality in every project. Haddad Plumbing and Heating Inc. includes benefits such as health care, paid time off and retirement savings. Powered by JazzHR D2P0ucIglt

Job DescriptionHaddad Plumbing and Heating Inc. is seeking a Drafter to join our design and project support team. The Drafter will work closely with Project Managers, engineers, and architects to prepare accurate and detailed technical drawings for mechanical construction projects. This role is responsible for converting design concepts, sketches, and specifications into high‑quality 2D and 3D CAD drawings to support construction planning and execution. The ideal candidate will be highly detail‑oriented, technically proficient, and capable of collaborating across disciplines to ensure drawings meet applicable codes, industry standards, and project requirements. The Drafter reports to the assigned Project Manager and plays a key role in supporting project accuracy, coordination, and successful delivery. Responsibilities: • Design plans using computer-aided design and drafting (CADD) software to produce detailed 2D/3D drawings, floor plans, elevations, and cross-sections, • Work from rough sketches and specifications created by engineers and architects to understand project requirements and incorporate feedback, • Help design products with engineering and manufacturing techniques, • Add details to architectural plans from their knowledge of building techniques, • Prepare multiple versions of designs for review by engineers and architects, • Specify dimensions, materials, and procedures for new products, • Modify existing product drawings that might require an update to add new features or have a different physical appearance, • Ensure all drawings meet industry standards, building codes, and project specific guidelines, • Create manuals that describe existing products’ operation, features and maintenance, • Work under the supervision of Sr. Leadership, • Other duties as assignedRequired Education and Experience, • Bachelor’s degree or diploma in drafting, architecture, engineering or a related field, • 3-5 years of demonstrable experience as a drafter in a reputed firm, with a strong portfolio of accurate and detailed technical drawings, • Proficiency in computer-aided design (CAD) software (AutoCAD, SolidWorks, or similar) and the ability to produce high-quality drawings, • Strong attention to detail and precision in drafting, ensuring that all dimensions and specifications are accurate, • Familiarity with construction and manufacturing processes with an understanding of design standards, symbols and drafting conventions in The United States, • Effective communication and collaboration skills to work closely with project stakeholders, • Strong problem-solving skills and the ability to find practical solutions to design challenges., • Additional certification from the American Design Drafting Association (ADDA) is a plusCompensation: $60,000 – $70,000 Annually Position Type and Expected Hours of Work: This is a full-time position. The days and hours of work are Monday through Friday: 7:00 am – 5:00 pm. About Haddad Plumbing and Heating Inc.: Haddad Plumbing and Heating Inc. is a Commercial Plumbing and HVAC company dedicated to: Providing premier workmanship and consistent delivery of reliable plumbing, heating and HVAC systems. We deliver expertise and professionalism in a competitive marketplace, using innovative techniques and tools to enhance productivity and efficiency, and meet crucial deadlines. Our ultimate goal is deliver better cost returns that will deliver greater value. When Haddad Plumbing & Heating Inc. is awarded a new construction project, our managers apply their expertise to present a comprehensive proposal that meets all requirements. Our in-house drafters then create technical designs and plans to be used by construction engineers. Project managers work closely with the general contractor and team of supervisors to ensure that the project remains on schedule without sacrificing quality work. Finally, our team of project managers with plumbing and HVAC supervisors coordinate when and how plumbing and HVAC systems are synergized and implemented. With all projects, our goal is to earn our clients’ trust to be their plumbing and HVAC contractor of choice, now and in the future. Our success is measured by achieving our clients’ vision and objectives for the project, but going above and beyond their expectations as guided by our core values. Here at Haddad Plumbing and Heating Inc., we earn this privilege with our clients by providing best-in-class service, value, and quality in every project. Haddad Plumbing and Heating Inc. includes benefits such as health care, paid time off and retirement savings. Powered by JazzHR xgLCuTAdsx

Job DescriptionHaddad Plumbing and Heating Inc. is seeking an Assistant Project Manager to join our project operations team based in Newark, New Jersey. The Assistant Project Manager will support the planning, coordination, and execution of mechanical construction projects. This role works closely with Project Managers, field teams, subcontractors, and senior leadership to ensure projects are delivered safely, on schedule, and in accordance with approved drawings, specifications, and quality standards. The ideal candidate will be technically proficient, detail-oriented, and proactive, with strong communication and organizational skills and the ability to thrive in a fast-paced construction environment. The Assistant Project Manager reports to the Project Manager Supervisor and plays a key role in supporting project performance, accurate documentation, and day-to-day site coordination. Responsibilities: • Coordinate daily construction activities with field staff, project manager, construction manager, estimators, consultants, subcontractors, and relevant departments using approved drawings and materials., • Support the Project Manager to ensure effective performance., • Execute work according to shop drawings, specifications, construction schedules, and method statements., • Assist the technical team with issues as directed by senior management., • Monitor work progress against construction programs and submit site reports per the project reporting plan., • Control and coordinate subcontractor activities, reporting progress and potential issues., • Maintain site management information systems and record daily activities and circumstances impacting the project., • Provide senior management with regular feedback on project status, focusing on program, quality, variations, client issues, and other relevant factors., • Review drawings for accuracy, ensure availability of sufficient information, and use only current revisions of issued-for-construction drawings, withdrawing all superseded versions from the site. Education, Qualities & Skills required:, • Mechanical engineering degree from a recognized university., • Proficient in AutoCAD and knowledgeable in plumbing and HVAC design codes., • Required to have OSHA 30 certification., • Excellent presentation, written, and verbal communication skills., • Able to prioritize, work under pressure, and meet tight deadlines., • Initiative-driven and proactive. Strong interpersonal and organizational skills., • Capable of managing sensitive and confidential information., • Effective both independently Compensation: $65,000 - $75,000 Annually Position Type and Expected Hours: This is a full-time position. Days and hours of work are Monday through Friday 7:00 am – 5:00 pm. About Haddad Plumbing and Heating Inc.: Haddad Plumbing and Heating Inc. is a Commercial Plumbing and HVAC company dedicated to: Providing premier workmanship and consistent delivery of reliable plumbing, heating and HVAC systems. We deliver expertise and professionalism in a competitive marketplace, using innovative techniques and tools to enhance productivity and efficiency, and meet crucial deadlines. Our ultimate goal is deliver better cost returns that will deliver greater value. When Haddad Plumbing & Heating Inc. is awarded a new construction project, our managers apply their expertise to present a comprehensive proposal that meets all requirements. Our in-house drafters then create technical designs and plans to be used by construction engineers. Project managers work closely with the general contractor and team of supervisors to ensure that the project remains on schedule without sacrificing quality work. Finally, our team of project managers with plumbing and HVAC supervisors coordinate when and how plumbing and HVAC systems are synergized and implemented. With all projects, our goal is to earn our clients’ trust to be their plumbing and HVAC contractor of choice, now and in the future. Our success is measured by achieving our clients’ vision and objectives for the project, but going above and beyond their expectations as guided by our core values. Here at Haddad Plumbing and Heating Inc., we earn this privilege with our clients by providing best-in-class service, value, and quality in every project. Haddad Plumbing and Heating Inc. includes benefits such as health care, paid time off and retirement savings. Powered by JazzHR ZfHT1CPzIG

Job DescriptionJob Description As a Structural Engineer you will be responsible for providing support to the Managers and taking an active part in conducting on-site inspections to identify deficiencies, as well as ensure compliance with project plans, specifications, and industry standards. Your primary focus will be delivering exceptional project outcomes while maintaining effective communication with internal teams, clients, and contractors. Estimated salary range for this position is $57,500 to $80,000 The salary listed is an estimate and not guaranteed. The salary offered will vary based on experience, education, skills, abilities, and certifications/license. DUTIES & RESPONSIBILITES: Essential Functions for All Technical Positions • Assist with Coordinating and managing internal kick-off, milestone, and closeout meetings for projects, fostering effective communication and collaboration among team members and stakeholders., • Assist with and verifies schedules and ensure adherence to project plans and timelines, both internally and with external resources, to meet project objectives efficiently., • Conducts on-site inspections, documenting existing conditions and potential deficiencies, performing field testing, photographing, and creating hand-sketches. Observes/ tracks work in progress to ensure compliance with project specifications., • Recording accurate field measurements and performs calculations throughout the duration of the project., • Assists with preparing written correspondence with clients and contractors, maintaining clear and professional communication throughout the project lifecycle., • Basic understanding of investigation reports and bid documents, including drawings and technical specifications, to ensure accurate interpretation and implementation., • Communicate project status with team and proactively escalates any issues or discrepancies that arise. Escalate unresolved issues to their direct supervisor in a timely manner., • Maintain organized records, files, drawings, and other essential project data ensuring that they are appropriately filed within the company’s systems for easy accessibility and future reference., • Keep up to date with job knowledge and industry trends through active participation in educational workshops, reviewing professional publications, and engaging in professional societies and networks., • Engage in networking activities and represent the company at events, seminars, continuing education presentations. Actively seek marketing opportunities to promote the organization’s presence in the industry. (Not limited to exclusive company events.), • Performs other duties as related to the position as assigned by the firm, demonstrating flexibility and adaptability to contributing to the overall success of the team. Special Requirements Technical • Basic understanding of Construction Plans, Specifications, and construction manuals., • Produces inspection field reports for clients, by thoroughly reviewing site observations, reporting findings and providing recommendations based upon professional judgement, while applying relevant codes and standards., • Assist in reviewing and evaluating change orders, assessing their impact on the project scope, schedule and budget and providing recommendations to the team lead/ senior management., • Review payment applications, verifying the accuracy of work completed and materials supplied by contractors. Client Relations • Participates in client meetings led by senior personnel, where active involvement is limited to taking meeting minutes, effectively communicating the meeting's agenda, and diligently following up with all stakeholders to ensure timely addressing of action items. Internal Team • Works closely with the team to understand the scope of work, budget, goals, deliverables, and timelines to ensure project success. Please be aware that this job description does not encompass an exhaustive list of activities, duties, or responsibilities expected of the employee. The nature of the role may necessitate additional responsibilities, and/or activities, which can occur at any time, with or without prior notice. SUPERVISORY RESPONSIBILITIES: • This position has no supervisory responsibilities. QUALIFICATIONS: Education • Bachelor’s degree from a four-year college or university in Engineering, Construction Management, or relevant work experience. Work Experience, • In lieu of education, a minimum of two years of experience in an engineering consulting firm or construction-related field. Licenses & Certifications, • For degree holders: Engineering Intern or Engineering in Training Certification preferred., • OSHA-10 Certification, • Valid United States Driver’s License required, as this position requires travel to and from client sites. Skills • Proficient written and verbal communication abilities., • Attention to detail and accuracy in project documentation and deliverables., • Strong project management and organizational skills and ability to handle multiple projects concurrently., • Knowledge of building codes, regulations, and standards., • Professional and courteous interaction with clients and colleagues., • Ability to attend client meetings and events, as needed., • Flexibility to work overtime, as needed., • Familiarity with drafting software for positions that utilize the software (AutoCAD, BricsCAD, Revit) for positions that utilize the software., • Strong teamwork and collaboration skills, fostering a positive and productive work environment, along with the ability to work both independently and collaboratively with team members from various disciplines., • Ability to work in the field and to travel outside local areas as workload and projects when needed., • Efficient time management skills while adhering to project budgets. PHYSICAL DEMANDS: Lifting • Must be able to lift and carry items weighing up to 40 lbs. Height and Access Equipment • Safe operation and use of ladders, scaffolds, and other access equipment as required., • Ability to work safely at heights. Outdoor Environment • Exposure to prolonged periods outdoors, which might extend beyond 3 hours., • Ability to work in diverse weather conditions, including but not limited to:, • Temperatures above 85°ree;F or below 40°ree;F., • High humidity levels (above 90%)., • Adverse weather conditions like snow/ice, rain, and wind. Mobility • Extended periods of standing and walking, possibly on uneven or challenging terrains. Flexibility in Scheduling, • Ability to adjust lunch hours based on project-specific demands, which might include working through regular lunch times. Who We Are At The Falcon Group, our mission is to deliver exceptional service across a broad range of industries, including multifamily, industrial, commercial, retail, hospitality, healthcare, and forensic/litigation support. Built on decades of experience, we provide a full spectrum of services, from architectural design to civil, structural, mechanical, electrical, and plumbing engineering, as well as construction administration and forensic assessments. This integrated approach allows us to deliver comprehensive, cost-conscious solutions to our clients’ most complex challenges. With a growing presence in key markets and multiple regional offices, we’re expanding rapidly and always looking for talented professionals to join our team. Guided by collaboration, innovation, and integrity, The Falcon Group provides the environment and support to help you thrive personally and professionally. EMPLOYEE BENEFITS We offer competitive salaries, professional work environments and a comprehensive benefits package. Benefits include Group Medical, Dental and Vision, 401k with employer match, Supplemental Life Insurance, AD&D, Legal Plan, Pet Insurance, Critical Illness, Hospital Indemnity and Accident Plans, Paid Holidays, Vacation, Sick time, Cell Phone Reimbursement and Continuing Education Equal Opportunity Employer/ Veterans/ Disabled Powered by JazzHR XnncUDlhZu

Job DescriptionWho We Are At The Falcon Group, our mission is to deliver exceptional service across a broad range of industries, including multifamily, industrial, commercial, retail, hospitality, healthcare, and forensic/litigation support. Built on decades of experience, we provide a full spectrum of services, from architectural design to civil, structural, mechanical, electrical, and plumbing engineering, as well as construction administration and forensic assessments. This integrated approach allows us to deliver comprehensive, cost-conscious solutions to our clients’ most complex challenges. With a growing presence in key markets and multiple regional offices, we’re expanding rapidly and always looking for talented professionals to join our team. Guided by collaboration, innovation, and integrity, The Falcon Group provides the environment and support to help you thrive personally and professionally. The Role Job Summary We have an immediate opening for a Project Manager in our Jersey City, NJ office location. As a Project Manager you will be responsible for providing project support and conducting on-site inspections to ensure compliance with project plans, specifications, and industry standards. Your primary focus will be on delivering exceptional project outcomes while maintaining effective communication with internal teams, clients, and contractors. DUTIES & RESPONSIBILITES: Essential Functions for All Technical Positions • Coordinate and manage internal kick-off, milestone, and closeout meetings for projects, fostering effective communication and collaboration among team members and stakeholders., • Verify schedules and ensure adherence to project plans and timelines, both internally and with external resources, to meet project objectives efficiently., • Conduct on-site inspections, documenting existing conditions, performing field testing, photographing, and creating hand-sketches. Observes/ tracks work in progress to ensure compliance with project specifications., • Records accurate field measurements and performs calculations throughout the duration of the project., • Prepare written correspondence with clients and contractors, maintaining clear and professional communication throughout the project lifecycle., • Understand investigation reports and bid documents, including drawings and technical specifications, to ensure accurate interpretation and implementation., • Communicate project status and proactively address any issues or discrepancies that arise. Escalate unresolved issues to their direct supervisor in a timely manner., • Maintain organized records, files, drawings, and other essential project data ensuring that they are appropriately filed within the company’s systems for easy accessibility and future reference., • Collect post-project feedback to identify areas of improvement and communicates this feedback to their direct supervisor., • Keep up to date with job knowledge and industry trends through active participation in educational workshops, reviewing professional publications, and engaging in professional societies and networks., • Engage in networking activities and represent the company at events, seminars, continuing education presentations. Actively seek marketing opportunities to promote the organization’s presence in the industry. (Not limited to exclusive company events.), • Performs other duties as related to the position as assigned by the firm, demonstrating flexibility and adaptability to contributing to the overall success of the team. Special Requirements Technical • Demonstrates an understanding of Construction Plans, Specifications, and construction manuals., • Produces inspection field reports for clients, by thoroughly reviewing site observations, reporting findings and providing recommendations based upon professional judgement, while applying relevant codes and standards., • Review and evaluate change orders, assessing their impact on the project scope, schedule and budget, and providing recommendations to the team lead/ senior management., • Review payment applications, verifying the accuracy of work completed and materials supplied by contractors.Client Relations, • Participates in client meetings led by senior personnel, where active involvement is limited to taking meeting minutes, effectively communicating the meeting's agenda, and diligently following up with all stakeholders to ensure timely addressing of action items., • While working with senior staff, assist in planning, organizing, and running project meetings, effectively communication project objectives, deliverables, and action items to all stakeholders.Internal Team, • Works closely with the team to understand the scope of work, budget, goals, deliverables, and timelines to ensure project success. Please be aware that this job description does not encompass an exhaustive list of activities, duties, or responsibilities expected of the employee. The nature of the role may necessitate additional responsibilities, and/or activities, which can occur at any time, with or without prior notice. Supervisory Responsibilities: This position has no supervisory responsibilities. Qualifications: Education • Bachelor’s degree from a four-year college or university in Engineering, Architecture, Construction Management, or relevant work experience.Work Experience, • A minimum of two years of experience in an architectural and engineering consulting firm or construction industry.Licenses and Certifications, • For degree holders: Engineering/Architectural Intern or Engineering in Training Certification preferred., • OSHA-10 Certification preferred., • Valid United States Driver’s License required, as this position requires travel to and from client sites.Skills, • Proficient written and verbal communication abilities., • Attention to detail and accuracy in project documentation and deliverables., • Strong project management and organizational skills and ability to handle multiple projects concurrently., • Knowledge of building codes, regulations, and standards., • Professional and courteous interaction with clients and colleagues., • Ability to attend client meetings and events, as needed., • Flexibility to work overtime, as needed., • Familiarity with drafting software for positions that utilize the software (AutoCAD, BricsCAD, Revit) for positions that utilize the software., • Strong teamwork and collaboration skills, fostering a positive and productive work environment, along with the ability to work both independently and collaboratively with team members from various disciplines., • Ability to work in the field and to travel outside local areas as workload and projects when needed., • Efficient time management skills while adhering to project budgets.Estimated salary range for this position is $55,000 to $100,000. The salary listed is an estimate and not guaranteed. The salary offered will vary based on experience, education, skills, abilities, and certifications/license if applicable PHYSICAL DEMANDS: Lifting • Must be able to lift and carry items weighing up to 40 lbs.Height and Access Equipment, • Safe operation and use of ladders, scaffolds, and other access equipment as required., • Ability to work safely at heights.Outdoor Environment, • Exposure to prolonged periods outdoors, which might extend beyond 3 hours., • Ability to work in diverse weather conditions, including but not limited to:, • Temperatures above 85°ree;F or below 40°ree;F., • High humidity levels (above 90%)., • Adverse weather conditions like snow/ice, rain, and wind.Mobility, • Extended periods of standing and walking, possibly on uneven or challenging terrains.Flexibility in Scheduling, • Ability to adjust lunch hours based on project-specific demands, which might include working through regular lunch times. EMPLOYEE BENEFITS We offer competitive salaries, professional work environments and a comprehensive benefits package. Benefits include: • Medical, Dental and Vision coverage, where we pay a portion of the premiums., • Supplement Insurance Options- Life, AD&D, Legal Plan, Pet Insurance, Critical Illness, Hospital Indemnity and Accident Plans., • Fully Company funded Short-Term & Long-Term Disability benefits., • 401K- A retirement program where we provide a match up to 3%., • We offer Paid Holidays, Paid sick time and Vacation days., • Employee Referral Program., • Employee Recognition Program., • Continuing Education Reimbursement., • Professional Licensing Assistance., • Jury Duty Leave., • Maternity/Paternity Leave., • Mobile Phone Reimbursement/ discounts., • Employee Assistance Program., • Workers Compensation. Equal Opportunity Employer/ Veterans/ Disabled Powered by JazzHR Gb1fSvJlDE

Job Description Position Overview: We are seeking a professional mechanic with specialized expertise in sump pumps, piping systems, commercial plumbing, pumps, sewer pumps, and steam lines. The ideal candidate will have extensive hands-on experience with the installation, maintenance, troubleshooting, and repair of complex plumbing systems and mechanical components. This position requires someone who is detail-oriented, highly skilled, and dedicated to delivering the best service to our clients. Key Responsibilities: Installation: Install sump pumps, sewer pumps, piping systems, commercial plumbing, and steam lines in residential, commercial, and industrial settings. Maintenance & Repairs: Perform routine maintenance, diagnostics, troubleshooting, and repair on various pump systems, plumbing systems, and steam lines. Inspection & Testing: Conduct regular inspections and testing of systems to ensure they meet safety standards and optimal operational efficiency. Customer Support: Provide clear and professional communication with clients, explaining issues and offering solutions in a manner that is easy to understand. Safety Compliance: Ensure all work is performed in compliance with safety regulations and industry standards. Documentation: Maintain accurate records of work performed, including inspections, repairs, and installations. Team Collaboration: Work closely with other team members to complete projects efficiently and on time.

Job DescriptionSalary: $50 - $50 DOE ABOUT US At AB Facility Services (ABFS), we dont just maintain buildings we keep businesses running at their best. As a premier nationwide provider of integrated facilities management services, ABFS delivers innovative solutions that enhance operations, maximize efficiency, and reduce costs for a diverse portfolio of clients across the United States. As our company continues to expand, we are looking for driven professionals who are ready to grow their careers with a fast-paced, people-first organization. JOB HIGHLIGHT The Assistant Chief Engineer supports the Chief Engineer in overseeing the daily operations, maintenance, and repair of all building systems within a commercial property portfolio. This role helps ensure the facilities are operating efficiently, safely, and in compliance with all applicable regulations and company standards. Key Responsibilities: • Assist in managing the day-to-day operations of commercial building systems, including HVAC, electrical, plumbing, life safety, and mechanical systems, • Support preventative maintenance programs and ensure timely completion of work orders, • Troubleshoot and resolve building system issues and equipment failures, • Coordinate with vendors, contractors, and building management as needed, • Assist with supervising engineering staff and providing technical guidance, • Monitor building performance and recommend operational improvements, • Ensure compliance with safety procedures, OSHA standards, and company policies, • Maintain accurate maintenance logs, reports, and documentation, • Support emergency response activities and after-hours situations when required, • Assist with budgeting, inventory management, and procurement of materials and equipment Qualifications • Minimum of 5+ years of experience in commercial building engineering or facilities maintenance, • Experience in a multi-building commercial environment preferred, • Strong working knowledge of HVAC, electrical, plumbing, and mechanical systems, • Leadership or supervisory experience preferred, • Valid engineering licenses/certifications preferred (Blue on Blue strongly preferred), • Ability to read blueprints, schematics, and technical manuals, • Strong troubleshooting and problem-solving skills, • Excellent communication and organizational abilities Physical Requirements • Ability to lift up to 50 pounds, • Ability to stand, walk, climb ladders, and work in mechanical spaces for extended periods, • Ability to respond to building emergencies as needed Position Type: Full-Time Salary: $50+/hr DOE Schedule: 5 days on site (Clark, NJ) Benefits: • Comprehensive benefits package including health, dental, and vision insurance, • Paid time off and holidays, • 401k retirement plan with company match, • Continuous training and professional development opportunities, • Take-home company vehicle for work-related travel WORKING FOR ABFS ABFS promotes a culture committed to the growth of individuals through continuous learning, mentoring, and other career growth opportunities. We believe it is important for our employees roles to be meaningful through active participation in corporate cultural and operational initiatives. We support these values and help them thrive in each employee. ABFS has built the company based on an employee-focused environment that offers a pathway to lifelong learning and career advancement. ABFS is an EEO/AA/Minority/Female/Disability/Veteran employer.

Job DescriptionHaddad Plumbing and Heating Inc. is seeking a Purchasing Manager to join our team at our headquarters in Newark, New Jersey. The Purchaser Manager will be responsible for sourcing and purchasing all materials and equipment. This role will manage vendor negotiations, purchase order issuance, cost verification, and delivery coordination to ensure materials are procured at competitive pricing and delivered according to project schedules. The ideal candidate will be highly organized, detail-oriented, and skilled in vendor relationship management, with the ability to work independently while supervising purchasing support staff. Responsibilities: • Procure material and equipment by negotiating costs, delivery schedule, and terms with vendors, • Issue and verify all costs of purchase orders according to the project estimate, • Manage purchase orders to ensure accurate tracking and expediting as needed, • Seek and maintain strong relationships with internal team members and vendors, • Confirm with vendors to acknowledge and ensure punctual delivery, • Follow up and resolve issues related to back orders and returns promptly, • Find and evaluate new vendors to improve cost and quality of material and equipment, • Participate in project meetings to understand delivery schedules, • Train and guide assistant purchaser and purchasing clerk in the performance of the assistant purchaser and purchasing clerk tasks, • Verify and monitor all purchases and work performed by assistant purchaser, • Meet daily with assistant purchaser and purchasing clerk to ensure work is being completed accurately and correctlyRequired Education and Experience, • High school diploma, • 5 Years of experience in purchasing, preferably in the plumbing and HVAC related industry, • Good written and verbal communication skills, • Exceptional organizational and follow up skills, • Ability to work independently with minimal supervision, • Attention to detailCompensation: $85,000 – $100,000 Annually Position Type and Expected Hours of Work This is a Full Time Position. Days and Hours of Work are Monday through Friday, 7:00 am – 5:00 pm. Saturdays 7:00 am – 3:00 pm as Needed About Haddad Plumbing and Heating Inc.: Haddad Plumbing and Heating Inc. is a Commercial Plumbing and HVAC company dedicated to: Providing premier workmanship and consistent delivery of reliable plumbing, heating and HVAC systems. We deliver expertise and professionalism in a competitive marketplace, using innovative techniques and tools to enhance productivity and efficiency, and meet crucial deadlines. Our ultimate goal is deliver better cost returns that will deliver greater value. When Haddad Plumbing & Heating Inc. is awarded a new construction project, our managers apply their expertise to present a comprehensive proposal that meets all requirements. Our in-house drafters then create technical designs and plans to be used by construction engineers. Project managers work closely with the general contractor and team of supervisors to ensure that the project remains on schedule without sacrificing quality work. Finally, our team of project managers with plumbing and HVAC supervisors coordinate when and how plumbing and HVAC systems are synergized and implemented. With all projects, our goal is to earn our clients’ trust to be their plumbing and HVAC contractor of choice, now and in the future. Our success is measured by achieving our clients’ vision and objectives for the project, but going above and beyond their expectations as guided by our core values. Here at Haddad Plumbing and Heating Inc., we earn this privilege with our clients by providing best-in-class service, value, and quality in every project. . Haddad Plumbing and Heating Inc. includes benefits such as health care, paid time off and retirement savings. Powered by JazzHR 5jLhDsJBSn

Job DescriptionHaddad Plumbing and Heating Inc. is seeking an Assistant Purchaser to join our team at our headquarters in Newark, New Jersey. The Assistant Purchaser will support the Purchasing Manager in sourcing and purchasing materials and equipment required. This role is responsible for assisting with purchase order creation, cost verification, inventory tracking, and vendor coordination to ensure materials are obtained at competitive pricing and delivered on schedule. The ideal candidate will be highly organized, detail-oriented, and eager to grow within the purchasing function while collaborating closely with internal teams and vendors. The Assistant Purchaser reports to the Purchasing and plays a key role in maintaining purchasing accuracy, material availability, and overall project efficiency. Responsibilities: • Accurately verify incoming and outgoing Purchase Orders and Packing Slips, • Track and update inventory, ensuring accurate records in Inventory Programs, • Create purchase orders, track and monitor their status, • Issue and Verify all Costs of Purchase Orders According to Project Estimates, • Create and present report on inventory levels, discrepancies, and other relevant data to Purchasing Manager, • Procure Material and Equipment by Negotiating Cost, Delivery Schedule and Terms with Vendors, • Follow up with Vendors to ensure timely delivery, • Participate in Project Meetings to Understand Delivery Schedules, • Monitor Purchasing Clerk to Ensure work is being Completed Accurately and On Time, • Meet Daily with Purchasing Manager and Purchasing Clerk to review delivery schedules, open Purchase Orders and other Items Pending, • Assist with various Purchasing Tasks as requested by Purchasing Manager Required Education and Experience • High school diploma or equivalent, • 1 Year of experience in purchasing, preferably in the Plumbing and HVAC related industry, • Exceptional organizational and follow-up skills, • Good written and verbal communication skills, • Proficiency in excel and MS word, • Attention to detailCompensation: $55,000 – $65,000 Annually Position Type and Expected Hours of Work This is a Full Time Position. Days and Hours of Work are Monday through Friday, 7:00 am – 5:00 pm. Saturdays 7:00 am – 3:00 pm as Needed. About Haddad Plumbing and Heating Inc.: Haddad Plumbing and Heating Inc. is a Commercial Plumbing and HVAC company dedicated to: Providing premier workmanship and consistent delivery of reliable plumbing, heating and HVAC systems. We deliver expertise and professionalism in a competitive marketplace, using innovative techniques and tools to enhance productivity and efficiency, and meet crucial deadlines. Our ultimate goal is deliver better cost returns that will deliver greater value. When Haddad Plumbing & Heating Inc. is awarded a new construction project, our managers apply their expertise to present a comprehensive proposal that meets all requirements. Our in-house drafters then create technical designs and plans to be used by construction engineers. Project managers work closely with the general contractor and team of supervisors to ensure that the project remains on schedule without sacrificing quality work. Finally, our team of project managers with plumbing and HVAC supervisors coordinate when and how plumbing and HVAC systems are synergized and implemented. With all projects, our goal is to earn our clients’ trust to be their plumbing and HVAC contractor of choice, now and in the future. Our success is measured by achieving our clients’ vision and objectives for the project, but going above and beyond their expectations as guided by our core values. Here at Haddad Plumbing and Heating Inc., we earn this privilege with our clients by providing best-in-class service, value, and quality in every project. Haddad Plumbing and Heating Inc. includes benefits such as health care, paid time off and retirement savings. Powered by JazzHR B1a4ByHMNO

Job DescriptionHaddad Plumbing and Heating Inc. is seeking an experienced Drafting Manager to join our design and project coordination team. The Drafting Manager will work closely with the President and Project Managers to oversee the preparation of clear, accurate, and constructible shop drawings that support field installation teams on active projects. This role is responsible for managing and mentoring the drafting team, coordinating weekly drawing review meetings, updating shop drawings, issuing RFIs as needed, and ensuring all drawings meet company standards, building codes, and project requirements. The ideal candidate is highly organized, technically proficient, and experienced in leading drafting operations within a mechanical construction environment. The Drafting Manager reports to the assigned Project Manager and plays a critical role in maintaining drawing accuracy, project coordination, and successful execution in the field. Responsibilities: • Prepare shop drawings using computer aided design (CADD) software to produce detailed 2d/3d drawings, floor plans, elevations, and cross-sections, • Work from rough sketches or specifications created by engineers and architects to understand project requirements, • Add detail to architectural and mechanical plans for proper installation., • Specify dimensions, materials, and procedures for new products, • Ensure all drawings meet industry standards, building codes, and project specific guidelines, • Work closely with president and project managers for accurate drawings., • Other duties as assigned Required Education and Experience • Bachelor’s degree or diploma in drafting, architecture, engineering or a related field, • 3-5 years of demonstrable experience as a Drafter, • Proficiency in computer-aided design (CAD) software (AutoCAD, SolidWorks, or similar) and the ability to produce high-quality drawings, • Strong attention to detail and precision in drafting, ensuring that all dimensions and specifications are accurate, • Familiarity with construction and manufacturing processes with an understanding of design standards, • Effective communication and collaboration skills, • Strong problem-solving skills and the ability to find practical solutions to design challenges, • Additional certification from the American Design Drafting Association (ADDA) is a plusCompensation: $80,000 - $90,000 Annually Position Type and Expected Hours of Work: This is a full-time position The days and hours of work are Monday through Friday: 7:00 am – 5:00 pm. About Haddad Plumbing and Heating Inc.: Haddad Plumbing and Heating Inc. is a Commercial Plumbing and HVAC company dedicated to: Providing premier workmanship and consistent delivery of reliable plumbing, heating and HVAC systems. We deliver expertise and professionalism in a competitive marketplace, using innovative techniques and tools to enhance productivity and efficiency, and meet crucial deadlines. Our ultimate goal is deliver better cost returns that will deliver greater value. When Haddad Plumbing & Heating Inc. is awarded a new construction project, our managers apply their expertise to present a comprehensive proposal that meets all requirements. Our in-house drafters then create technical designs and plans to be used by construction engineers. Project managers work closely with the general contractor and team of supervisors to ensure that the project remains on schedule without sacrificing quality work. Finally, our team of project managers with plumbing and HVAC supervisors coordinate when and how plumbing and HVAC systems are synergized and implemented. With all projects, our goal is to earn our clients’ trust to be their plumbing and HVAC contractor of choice, now and in the future. Our success is measured by achieving our clients’ vision and objectives for the project, but going above and beyond their expectations as guided by our core values. Here at Haddad Plumbing and Heating Inc., we earn this privilege with our clients by providing best-in-class service, value, and quality in every project. Haddad Plumbing and Heating Inc. includes benefits such as health care, paid time off and retirement savings. Powered by JazzHR 3OhliLZZoB

Job Description Who We Are At The Falcon Group, our mission is to deliver exceptional service across a broad range of industries, including multifamily, industrial, commercial, retail, hospitality, healthcare, and forensic/litigation support. Built on decades of experience, we provide a full spectrum of services, from architectural design to civil, structural, mechanical, electrical, and plumbing engineering, as well as construction administration and forensic assessments. This integrated approach allows us to deliver comprehensive, cost-conscious solutions to our clients’ most complex challenges. With a growing presence in key markets and multiple regional offices, we’re expanding rapidly and always looking for talented professionals to join our team. Guided by collaboration, innovation, and integrity, The Falcon Group provides the environment and support to help you thrive personally and professionally. The Role Immediate Opening for a Forensic Engineer/ Structural Professional Engineer to work in our Warren, NJ location in charge of forensic investigations and expert witness testimony. The Forensic Engineer is responsible for leading and managing forensic investigation, report preparation and expert testimony (in deposition and trial) specifically for community association transitions, construction, claims and ensuring the successful delivery of projects within scope, budget and timeline. DUTIES & RESPONSIBILITES: Special Requirements Technical • Able to serve as an expert witness and depositions, mediations, or litigation, • Perform and coordinate forensic inspections, applying technical expertise to assess project conditions and identify potential issues or deficiencies/defects., • Generate comprehensive field reports detailing observations, measurements, and findings from site visits and inspections., • Reviews and interprets drawings, codes, specifications, project manuals, material specifications, etc., • Generate expert reports that provide in-depth analysis, conclusions, and recommendations based on project requirements and findings., • Interprets and specifies a wide range of testing, including but not limited to material testing, structural analysis and performance evaluations. Supervises testing activities and ensures accurate data collection for accurate interpretation of results., • Performs peer review of other technical data prepared by internal Engineers/Architects as well as third party entities, • Provide technical guidance and expertise to the team throughout the design and construction phases, ensuring compliance with relevant regulations, codes and standards., • Performs and coordinate design, calculations, and drawings., • Oversee and assist in the development and review of technical specifications, drawings, and construction documents. Essential Functions for All Technical Positions • Coordinate and manage internal kick-off, milestone, and closeout meetings for projects, fostering effective communication and collaboration among team members and stakeholders., • Verify schedules and ensure adherence to project plans and timelines, both internally and with external resources, to meet project objectives efficiently., • Conduct and coordinate on-site inspections, documenting existing conditions, performing field testing, photographing, and creating hand-sketches., • Coordinates the recordation of accurate field measurements and performs calculations throughout the duration of the project., • Prepare written correspondence with clients and contractors, maintaining clear and professional communication throughout the project lifecycle., • Understand and review investigation reports, including drawings and technical specifications, to ensure accurate interpretation and implementation., • Communicate project status and proactively address any issues or discrepancies that arise. Escalate unresolved issues to their direct supervisor in a timely manner., • Maintain organized records, files, drawings, and other essential project data ensuring that they are appropriately filed within the company’s systems for easy accessibility and future reference., • Collect post-project feedback to identify areas of improvement and communicates this feedback to their direct supervisor., • Keep up to date with job knowledge and industry trends through active participation in educational workshops, reviewing professional publications, and engaging in professional societies and networks., • Engage in networking activities and represent the company at events, seminars, continuing education presentations. Actively seek marketing opportunities to promote the organization’s presence in the industry. (Not limited to exclusive company events.), • Performs other duties as related to the position as assigned by the firm, demonstrating flexibility and adaptability to contributing to the overall success of the team. Client Relations • Collaborate with cross-functional teams, including clients, contractors and consultants to coordinate project activities and resolve technical issues., • Collaborate with legal teams and represent the firm in mediations, providing expert opinions and strategic guidance., • Participate in meetings with clients and stakeholders to understand project objectives, present design proposals, and provide technical recommendations., • Foster strong client relationships, ensuring effective communication and understanding of project requirements and objectives. Internal Team • Works closely with the team to direct and provide the scope of work, budget, goals, deliverables, and timeline to ensure project success., • Mentor and support junior team members, fostering their professional growth and development. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. SUPERVISORY RESPONSIBILITIES: This position has no supervisory responsibilities. QUALIFICATIONS: Education • Bachelor’s degree from a four-year college or university in Structural/ Civil Engineering. Work Experience • Four plus years of experience in the architectural and engineering consulting industry., • Must have experience as an expert witness. Licenses & Certifications • Professional Engineer license required., • OSHA 10 Certification preferred., • Valid United States Driver’s License required, as this position requires travel to and from client sites. Skills • Proficient written and verbal communication abilities., • Attention to detail and accuracy in project documentation and deliverables., • Strong project management and organizational skills and ability to handle multiple projects concurrently., • Knowledge of building codes, regulations, and standards., • Professional and courteous interaction with clients and colleagues., • Ability to attend client meetings and events, as needed., • Flexibility to work overtime, as needed., • Strong teamwork and collaboration skills, fostering a positive and productive work environment, along with the ability to work both independently and collaboratively with team members from various disciplines., • Ability to work in the field and to travel outside local areas as workload and projects when needed., • Efficient time management skills while adhering to project budgets. Estimated salary range for this position is $90,000 to $170,000. The salary listed is an estimate and not guaranteed. The salary offered will vary based on experience, education, skills, abilities, and certifications/license if applicable PHYSICAL DEMANDS: Lifting • Must be able to lift and carry items weighing up to 40 lbs. Height and Access Equipment • Safe operation and use of ladders, scaffolds, and other access equipment as required., • Ability to work safely at heights. Outdoor Environment • Exposure to prolonged periods outdoors, which might extend beyond 3 hours., • Ability to work in diverse weather conditions, including but not limited to:, • Temperatures above 85°ree;F or below 40°ree;F., • High humidity levels (above 90%)., • Adverse weather conditions like snow/ice, rain, and wind. Mobility • Extended periods of standing and walking, possibly on uneven or challenging terrains. Flexibility in Scheduling • Ability to adjust lunch hours based on project-specific demands, which might include working through regular lunch times. EMPLOYEE BENEFITS We offer competitive salaries, professional work environments and a comprehensive benefits package. Benefits include Group Medical, Dental and Vision, 401k with employer match, Supplemental Life Insurance, AD&D, Legal Plan, Pet Insurance, Critical Illness, Hospital Indemnity and Accident Plans, Paid Holidays, Vacation, Sick time, Cell Phone Reimbursement and Continuing Education Equal Opportunity Employer/ Veterans/ Disabled Powered by JazzHR 2ARqcfr7S2

Job DescriptionHaddad Plumbing and Heating Inc. is seeking a Purchaser to join our team at our headquarters in Newark, New Jersey. The Purchaser will be responsible for sourcing and purchasing all materials and equipment. This role will manage vendor negotiations, purchase order issuance, cost verification, and delivery coordination to ensure materials are procured at competitive pricing and delivered according to project schedules. The ideal candidate will be highly organized, detail-oriented, and skilled in vendor relationship management, with the ability to work independently while supervising purchasing support staff. The Purchaser reports directly to the Purchasing Manager and plays a critical role in cost control, material availability, and overall project execution. Responsibilities: • Procure material and equipment by negotiating cost, delivery schedule, and terms with vendors, • Issue and verify all costs of purchase orders according to the project estimate, • Manage purchase orders to ensure accurate tracking and expediting as needed, • Seek and maintain strong relationships with internal team members and vendors, • Confirm with vendors to acknowledge and ensure punctual delivery, • Follow up and resolve issues related to back orders and returns promptly, • Find and evaluate new vendors to improve cost and quality of material and equipment, • Participate in project meetings to understand delivery schedules, • Train and guide assistant purchaser and purchasing clerk in the performance of the assistant purchaser and purchasing clerk tasks, • Verify and monitor all purchases and work performed by assistant purchaser, • Meet daily with assistant purchaser and purchasing clerk to ensure work is being completed accurately and correctlyRequired Education and Experience, • High school diploma, • 3 Years of experience in purchasing, preferably in the plumbing and HVAC related industry, • Good written and verbal communication skills, • Exceptional organizational and follow up skills, • Ability to work independently with minimal supervision, • Attention to detailCompensation: $65,000 – $70,000 Annually Position Type and Expected Hours of Work This is a Full Time Position. Days and Hours of Work are Monday through Friday, 7:00 am – 5:00 pm. Saturdays 7:00 am – 3:00 pm as Needed. About Haddad Plumbing and Heating Inc.: Haddad Plumbing and Heating Inc. is a Commercial Plumbing and HVAC company dedicated to: Providing premier workmanship and consistent delivery of reliable plumbing, heating and HVAC systems. We deliver expertise and professionalism in a competitive marketplace, using innovative techniques and tools to enhance productivity and efficiency, and meet crucial deadlines. Our ultimate goal is deliver better cost returns that will deliver greater value. When Haddad Plumbing & Heating Inc. is awarded a new construction project, our managers apply their expertise to present a comprehensive proposal that meets all requirements. Our in-house drafters then create technical designs and plans to be used by construction engineers. Project managers work closely with the general contractor and team of supervisors to ensure that the project remains on schedule without sacrificing quality work. Finally, our team of project managers with plumbing and HVAC supervisors coordinate when and how plumbing and HVAC systems are synergized and implemented. With all projects, our goal is to earn our clients’ trust to be their plumbing and HVAC contractor of choice, now and in the future. Our success is measured by achieving our clients’ vision and objectives for the project, but going above and beyond their expectations as guided by our core values. Here at Haddad Plumbing and Heating Inc., we earn this privilege with our clients by providing best-in-class service, value, and quality in every project. Haddad Plumbing and Heating Inc. includes benefits such as health care, paid time off and retirement savings. Powered by JazzHR ifmWhucDh1

Job DescriptionBenefits: • Uncapped Commission, • Competitive salary, • Free uniforms, • Bonus based on performance, • Health insurance, • Opportunity for advancement, • Paid time off, • 401(k), • Dental insurance, • Vision insurance Earn $100K$300K+ | Uncapped Commission | Growth Opportunity 1-Tom-Plumber is a fast-growing 24/7 plumbing, drain, and sewer service company looking for motivated sales professionals who thrive on building relationships, generating new business, and growing commercial accounts. This is a strong opportunity for someone who enjoys B2B sales, networking, and creating long-term client relationships while earning uncapped commission in a high-demand industry. US Work Authorization Required What We Offer • Uncapped commission structure, • Expected earnings: $100,000$300,000+, • Health, Dental & Vision Insurance, • 401(k) with company contribution, • Paid time off, • Advancement opportunities as the company grows, • Supportive team environmentWhat Youll Do, • Build and manage commercial client relationships, • Prospect and develop new business opportunities, • Manage a pipeline of commercial and property management accounts, • Coordinate vendor onboarding processes, • Partner with operations to ensure excellent customer experience, • Grow existing accounts and increase share of wallet, • Track sales activity and pipeline updates in CRMWhat Were Looking For Required • 2+ years of B2B sales experience, • Comfortable with cold outreach and relationship building, • Strong communication and follow-up skills, • Valid drivers license and ability to travel locallyPreferred, • Experience in plumbing, facilities, home services, construction, or trades, • Experience working with property management or facilities teams, • Familiarity with CRM platforms such as Salesforce, HubSpot, or ServiceTitanWhy Join 1-Tom-Plumber? Were building a team of high-performing professionals who take pride in delivering great service, building long-term customer relationships, and growing with a company that values professionalism, responsiveness, and execution. If youre motivated by growth, relationship-driven sales, and unlimited earning potential, wed love to hear from you. Hiring Process Simple Interview Process: Phone Screen Interview Offer Apply today for an opportunity to join a fast-growing team with uncapped earning potential and a streamlined hiring process designed to get qualified candidates started quickly.

Job DescriptionHaddad Plumbing and Heating Inc. is seeking a Junior Estimator to join our design and project support team. The Junior Estimator will be Responsible for Taking Off Material, Equipment, and Labor from Drawings Accurately from Company’s Estimating Software. A Detailed Proposal will be Generated after Takeoff is Completed. The Junior Estimator will also Generate Change Orders as needed from Project Managers. Responsibilities: • Review Full Drawing Set and Specifications., • Send Out all Fixtures and Equipment to Vendors for Pricing., • Use Specified Material for the Assembly of the Project., • Prepare Bill of Material., • Prepare Labor Hours from The Estimate. Education, Qualities & Skills required: • Minimum 2-year College Degree, • HVAC/Plumbing Estimation Experience Preferable, • Must know how to use MS Office and Possess the Ability to Read and Interpret Blueprints. Compensation: $60,000 Position Type and Expected Hours of Work This is a full-time position. Days and hours of work are Monday through Friday 7:00AM – 5:00PM About Haddad Plumbing and Heating Inc.: Haddad Plumbing and Heating Inc. is a Commercial Plumbing and HVAC company dedicated to: Providing premier workmanship and consistent delivery of reliable plumbing, heating and HVAC systems. We deliver expertise and professionalism in a competitive marketplace, using innovative techniques and tools to enhance productivity and efficiency, and meet crucial deadlines. Our ultimate goal is deliver better cost returns that will deliver greater value. When Haddad Plumbing & Heating Inc. is awarded a new construction project, our managers apply their expertise to present a comprehensive proposal that meets all requirements. Our in-house drafters then create technical designs and plans to be used by construction engineers. Project managers work closely with the general contractor and team of supervisors to ensure that the project remains on schedule without sacrificing quality work. Finally, our team of project managers with plumbing and HVAC supervisors coordinate when and how plumbing and HVAC systems are synergized and implemented. With all projects, our goal is to earn our clients’ trust to be their plumbing and HVAC contractor of choice, now and in the future. Our success is measured by achieving our clients’ vision and objectives for the project, but going above and beyond their expectations as guided by our core values. Here at Haddad Plumbing and Heating Inc., we earn this privilege with our clients by providing best-in-class service, value, and quality in every project. Haddad Plumbing and Heating Inc. includes benefits such as health care, paid time off and retirement savings. Powered by JazzHR TM0WxZLBA2

Job DescriptionSummary Perform Maintenance and Repairs on Vehicles, Tools, Equipment, and Property. Work Involves Diagnosing and Repairing Mechanical Issues, Servicing, Cleaning, and Conducting Routine Inspections; Ensuring all Vehicles, Tools, and Equipment Operate Efficiently and Safely. Essential Functions • Maintain, clean, and service all tools and equipment, • Track and manage all vehicle documentation, including insurance and registration, on a monthly basis; promptly notify human resources of any updates, expirations, or discrepancies, • Verify that all vehicle inspections are completed and up to date (make sure all vehicles have current inspection stickers), • Perform routine maintenance and minor repairs on heavy equipment, including replacement of lights, door handles, and doors as needed, • Conduct regular service of company vehicles, including oil changes, tire rotations, brake replacements, and fluid checks/refills., • Coordinate and transport vehicles for required inspection with notice to management, • Monitor and verify daily vehicle sign-in/out logs in coordination with human resources., • Ensure work tickets are completed for all vehicles and equipment, • Preform pre- and post-trip inspections on delivery trucks and dump trucks, • Make any necessary repairs to maintain vehicle inspections, • Any other tasks as assigned by managementRequired Education and Experience, • Experienced in Vehicle, Equipment, Tools, and Property Maintenance, • Skilled in Heavy Equipment Repairs and Preventive Maintenance, • Strong Troubleshooting and Problem-Solving Abilities, • Detail-Oriented, • Capable to Work IndependentlyAbout Haddad Plumbing and Heating Inc.: Haddad Plumbing and Heating Inc. is a Commercial Plumbing and HVAC company dedicated to: Providing premier workmanship and consistent delivery of reliable plumbing, heating and HVAC systems. We deliver expertise and professionalism in a competitive marketplace, using innovative techniques and tools to enhance productivity and efficiency, and meet crucial deadlines. Our ultimate goal is deliver better cost returns that will deliver greater value. When Haddad Plumbing & Heating Inc. is awarded a new construction project, our managers apply their expertise to present a comprehensive proposal that meets all requirements. Our in-house drafters then create technical designs and plans to be used by construction engineers. Project managers work closely with the general contractor and team of supervisors to ensure that the project remains on schedule without sacrificing quality work. Finally, our team of project managers with plumbing and HVAC supervisors coordinate when and how plumbing and HVAC systems are synergized and implemented. With all projects, our goal is to earn our clients’ trust to be their plumbing and HVAC contractor of choice, now and in the future. Our success is measured by achieving our clients’ vision and objectives for the project, but going above and beyond their expectations as guided by our core values. Here at Haddad Plumbing and Heating Inc., we earn this privilege with our clients by providing best-in-class service, value, and quality in every project. Haddad Plumbing and Heating Inc. includes benefits such as health care, paid time off and retirement savings. Powered by JazzHR oVHc8w6tTi

Job DescriptionSalary: $18 to $22 per HR Beverage Systems has been a family owned business since 1988. We are dedicated to bringing exceptional service to the dispensed beverage industry. Whetherit is a full service, equipment and sales support program or a standard service call program, Beverage Systems uses technology,experience, and drive to make our customer's beverage program a success! We are looking for talented individuals with a passion for customer service, attention to detail, and a desire to apply their technical skills throughout a busy work day. You will spend most of your day in the NY Metro area servicing customers, troubleshooting, and working with our regional dispatch team. There will be times that overnight and traveling will be required based on business need. This role will require interaction with various businesses including retail, hospital, and educational institutions, looking for strong communication skills and enjoyment of working with the public. All training provided by the company. Please email resume to jobs@beveragesystems.org Benefits Offered: • Medical, dental and vision, • Retirement, • EAP Benefits, • Paid-Time-Off, • Company cell phone Here is a brief description of the job: The Technician will professionally diagnose, restore, and repair beverageequipment throughout the day.Responsible for properly installing, repairing and maintaining field beverage equipment. Must represent the company and its customers in a professional manner. Maintain an acceptable level of productivity related to the amount of completed calls. Primary Responsibilities: • Perform installations, repairs and maintenance on commercial beverage and related equipment at our customers location., • Diagnose problems, replace or repair parts, test and make adjustments., • Perform mechanic skills including, but not limited to, mechanical, electrical, plumbing, troubleshooting and repair of beverage equipment., • Read and interpret equipment manuals and work orders to perform required maintenance and service., • Demonstrate proper knowledge of equipment. Communicate with the supervisor when extra training may be needed., • Use a variety of hand and power tools, electric meters and material handling equipment in performing duties., • Comply with regulations and maintain a clean and orderly work area., • Conduct yourself in a professional manner at all times while treating customers, driving company vehicles, etc. Treat others how you would like to be treated, • Fill out field service reports properly, legible and with as much information as possible. When eligible., • Maintain frequent communication with the dispatcher to assure that the right information is relayed and entered into our system., • Maintain company vehicles in good working condition, both mechanically and organized., • Arrange for company vehicles to get routine maintenance and any required service. Make sure proper documentation is kept up-to-date and kept in company vehicles at all times.All repairs and service on vehicles covered by the company through our fleet management company., • Fulfill all new and existing training requirements as set by service managers and/or technician development directors., • Must be able to cover emergency calls on weekends on a rotating basis as laid out by the manager to satisfy the market needs., • Other duties as assigned. Qualifications & Requirements: • Must be able to maintain a valid driver's license., • Clean Driver Record, • Occasional Weekend Availability, • Must have some electrical troubleshooting knowledge., • Be able to read volts, amps, ohms and continuity on multimeters., • Must have some plumbing knowledge., • Must provide your own general tools. Specialty industry tools provided to the technician on loan by the company. Working Conditions: Work includes long distance driving. Occasionally lifting of machinery and/or items that may exceed 75 lbs. Must be able to work overtime as requested by management, within reason. If you want to be a part of a growing family business who has a passion for their employees and their customers please email resume to jobs@beveragesystems.org

Job Description The Role Job Summary We are seeking an energetic, registered architect/licensed civil/structural engineer with strong experience in building façade projects, FISP inspections and familiarity in handling building façade projects in New York city area. The Senior Facade Architect/Engineer is responsible for leading and managing building façade architectural and engineering projects, overseeing design development, providing technical expertise, and ensuring the successful delivery of projects within scope, budget and timeline. Estimated salary range for this position is $140,000 to $195,000. The salary listed is an estimate and not guaranteed. The salary offered will vary based on experience, education, skills, abilities, and certifications/license if applicable Responsibilities and Duties: • Coordinate and manage internal kick-off, milestone, and closeout meetings for projects, fostering effective communication and collaboration among team members and stakeholders., • Verify schedules and ensure adherence to project plans and timelines, both internally and with external resources, to meet project objectives efficiently., • Conduct and coordinate on-site inspections, documenting existing conditions, performing field testing, photographing, and creating hand-sketches. Observes/ tracks work in progress to ensure compliance with project specifications., • Coordinates the recording of accurate field measurements and performs calculations throughout the duration of the project., • Prepare written correspondence with clients and contractors, maintaining clear and professional communication throughout the project lifecycle., • Understand and review investigation reports and bid documents, including drawings and technical specifications, to ensure accurate interpretation and implementation., • Communicate project status and proactively address any issues or discrepancies that arise. Escalate unresolved issues to their direct supervisor in a timely manner., • Maintain organized records, files, drawings, and other essential project data ensuring that they are appropriately filed within the company’s systems for easy accessibility and future reference., • Collect post-project feedback to identify areas of improvement and communicate the feedback to their direct supervisor., • Keep up to date with job knowledge and industry trends through active participation in educational workshops, reviewing professional publications, and engaging in professional societies and networks., • Engage in networking activities and represent the company at events, seminars, continuing education presentations. Actively seek marketing opportunities to promote the organization’s presence in the industry., • Performs other duties as related to the position as assigned by the firm, demonstrating flexibility and adaptability to contributing to the overall success of the team. Special Requirements Technical • Provide technical guidance and expertise to the team throughout the design and construction phases, ensuring compliance with relevant regulations, codes and standards., • Performs and coordinate design, calculations and drawings., • Performs peer review of other technical data prepared by internal Engineers/Architects as well as third party entities., • Perform and coordinate forensic inspections, applying technical expertise to assess project conditions and identify potential issues or deficiencies., • Able to serve as an expert witness and depositions, mediations, or litigation., • Conducts a wide range of testing, including but not limited to material testing, structural analysis and performance evaluations. Supervises testing activities and ensures accurate data collection for accurate interpretation of results., • Generate comprehensive field reports detailing observations, measurements, and findings from site visits and inspections., • Generate expert reports that provide in-depth analysis, conclusions, and recommendations based on project requirements and findings., • Oversee and assist in the development and review of technical specifications, drawings and construction documents. Client Relations • Collaborate with cross-functional teams, including clients, contractors and consultants to coordinate project activities and resolve technical issues., • Collaborate with legal teams and represent the firm in mediations, providing expert opinions and strategic guidance., • Participate in meetings with clients and stakeholders to understand project objectives, present design proposals, and provide technical recommendations., • Foster strong client relationships, ensuring effective communication and understanding of project requirements and objectives. Internal Team • Works closely with the team to understand the scope of work, budget, goals, deliverables, and timeline to ensure project success., • Mentor and support junior team members, fostering their professional growth and development. SUPERVISORY RESPONSIBILITIES: • This position has no supervisory responsibilities Qualifications Education • Bachelor’s degree from a four-year college or university in Civil/ Structural Engineering or Architecture. Work Experience • Five plus years of experience in the architectural and engineering consulting industry. Licenses and Certifications • Professional Engineer or Registered Architect license required., • Maintain compliance with licensing requirements and applicable regulations., • OSHA-10 Certification, • Valid United States Driver’s License required, as this position requires travel to and from client sites. Skills • Proficient written and verbal communication abilities., • Attention to detail and accuracy in project documentation and deliverables., • Strong project management and organizational skills and ability to handle multiple projects concurrently., • Knowledge of building codes, regulations, standards and familiarity with FISP inspections and local law regulations on inspections., • Professional and courteous interaction with clients and colleagues., • Ability to attend client meetings and events, as needed., • Flexibility to work overtime, as needed., • Familiarity with drafting software for positions that utilize the software (AutoCAD, BricsCAD, Revit) for positions that utilize the software., • Strong teamwork and collaboration skills, fostering a positive and productive work environment, along with the ability to work both independently and collaboratively with team members from various disciplines., • Ability to work in the field and to travel outside local areas as workload and projects when needed., • Efficient time management skills while adhering to project budgets. PHYSICAL DEMANDS: Lifting • Must be able to lift and carry items weighing up to 40 lbs. Height and Access Equipment • Safe operation and use of ladders, scaffolds, and other access equipment as required., • Ability to work safely at heights. Outdoor Environment • Exposure to prolonged periods outdoors, which might extend beyond 3 hours., • Ability to work in diverse weather conditions, including but not limited to:, • Temperatures above 85°ree;F or below 40°ree;F., • High humidity levels (above 90%)., • Adverse weather conditions like snow/ice, rain, and wind. Mobility • Extended periods of standing and walking, possibly on uneven or challenging terrains. Flexibility in Scheduling • Ability to adjust lunch hours based on project-specific demands, which might include working through regular lunch times. Who We Are At The Falcon Group, our mission is to deliver exceptional service across a broad range of industries, including multifamily, industrial, commercial, retail, hospitality, healthcare, and forensic/litigation support. Built on decades of experience, we provide a full spectrum of services, from architectural design to civil, structural, mechanical, electrical, and plumbing engineering, as well as construction administration and forensic assessments. This integrated approach allows us to deliver comprehensive, cost-conscious solutions to our clients’ most complex challenges. With a growing presence in key markets and multiple regional offices, we’re expanding rapidly and always looking for talented professionals to join our team. Guided by collaboration, innovation, and integrity, The Falcon Group provides the environment and support to help you thrive personally and professionally. EMPLOYEE BENEFITS We offer competitive salaries, professional work environments and a comprehensive benefits package. Benefits include Group Medical, Dental and Vision, 401k with employer match, Supplemental Life Insurance, AD&D, Legal Plan, Pet Insurance, Critical Illness, Hospital Indemnity and Accident Plans, Paid Holidays, Vacation, Sick time, Cell Phone Reimbursement and Continuing Education Equal Opportunity Employer/ Veterans/ Disabled Powered by JazzHR vNQ6EEkP4a

Job Description Auto-Chlor is now hiring an Electrical Engineer-Equipment Design to lead our engineering development initiatives. We’re looking for a leader who will contribute to our “People First” culture. This position is in-office full-time at our facility in MEMPHIS, TN. What’s in it for you? RELOCATION ASSISTANCE OFFERED We understand that great talent can come from anywhere. That's why we offer: • Up to 60 days of temporary housing, • Reimbursement for moving and travel expenses, • Support with general relocation needs, • A people first culture where contributions and collaboration are encouraged and celebrated., • A competitive salary up to $150k annually with an excellent benefits package., • Ongoing wellness initiatives to improve your health and well-being. What are some of the day-to-day responsibilities? • Develops and implements solutions for dishwasher and dispensing innovation projects, including both new equipment development and existing equipment innovation. Projects vary in duration from two months to over a year based on Project Brief requirements., • Administers regulatory compliance with agencies such as NSF, CSA, UL, BOCA, ASSE, UPC, and Federal, State, and Local authorities. Provides support to the field sales team on regulatory issues, with an emphasis on maintaining customer equipment operation without disruption to business., • Provides technical support to field sales team, contractors, consultants, engineers, and architects., • Develops and manages technical documentation for design control and field use. Requirements: • Bachelor of Science in Engineering Degree or comparable years of work experience., • 5-10 years of electrical and electronic design experience, along with experience working with regulatory agencies. Experience in the commercial appliance industry is preferred., • Embedded Software/hardware design, • Knowledge of codes and standards for plumbing, sanitation, electrical, and building (NSF, CSA, UL, BOCA, ASSE, UPC, FDA), • Electrical/electronic circuit design, • CAD Modeling – Autodesk Inventor Preferred Location: 746 Poplar Ave Memphis, TN 38105

Job Description If you are looking for an opportunity to grow your career and work on world class projects, we are looking for you. Vanderweil Engineers is a top ranked national full-service engineering firm specializing in MEP/FP, and technology services. Working in multiple sectors including Science & Technology, Mission Critical, Academic, Healthcare, Government and Commercial buildings. In our 75th year in operation with a staff of 500 + located across nine offices, we are proud to be one of the leading independently owned engineering firms in the country. We are looking for a Senior Commissioning Engineer to join our team on a hybrid schedule at our Alexandria, VA, NYC, Newark, NY or Boston, MA headquarters (Hybrid). Expand your skillset and have a voice by working outside the box with the way we approach projects at Vanderweil. Responsibilities: • Provide Commissioning and Construction Administrative including engineering and technical support on ongoing projects, • Review designs and lead and direct onsite commissioning activities, including technical documentation and contractual requirements, • Ensure all aspect of construction project are designed, installed, tested and maintained, • Assist with identification and addressing of commissioning and construction MEP/FP system operational issues., • Responsibilities include development of Commissioning Plans, specifications and finial Commissioning Report. ”Cradle to Grave”, • Maintain strong client relationships, • Troubleshoot technical MEP/FP related issues, • The ability to act as a liaison between Vanderweil Engineers (PIC, Project Manager and engineers), end client(owner) and contractor (including subcontractors) Essential Skills: • 8+ years’ experience in related field (on-site construction experience is required), • MEP/FP design and construction experience is required, • Bachelor’s Degree in related field or related trade experience, • Understanding of HVAC, Electrical or Plumbing controls, • Travel required (No Weekends - limited overnights), • PE, CX, and LEED Certification is a plus Our Flexible & Hybrid Culture Compensation range is $135,000 - $175,000, plus bonus and mileage eligible commensurate with years of experience, professional licensure, project exposure, and education. We know that work/life integration is important to our employees. Our hybrid work style (up to 2 days remote per week) allows team members to have flexibility while building their skills through in-person exposure to industry experts. Our wellness programs prioritize our team members’ physical and behavioral health. We are an equal opportunity employer committed to diversity in the workplace. If you would like to connect with us for more information, please contact a member of our recruitment team or to learn more about our work culture, please visit us at www.vanderweil.com. https://www.linkedin.com/in/ericgimler/

Job Description Hazen and Sawyer is seeking an HVAC Engineer for our Iselin, NJ office. As part of our HVAC/Plumbing team the selected candidate can expect to work closely with more experienced HVAC Engineers to perform HVAC and Plumbing designs for some of the nation's most challenging and rewarding projects. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,000 employees in 70+ offices throughout the United States, Latin America, Canada, and the UK., • A flexible hybrid work schedule supports today's busy professionals.Key Responsibilities: This role focuses on municipal water and wastewater projects including planning, preliminary and final designs, and providing engineering services for projects in construction. The candidate should enjoy working within a team environment, and seek to develop HVAC and Plumbing design skills. Required Qualifications: • Bachelors of Science degree in Mechanical Engineering (preferred)., • Ability to communicate well both orally and in writing., • A minimum of (3) years of experience performing heating, ventilating, cooling, and plumbing design for municipal, commercial or industrial facilities., • A PE license is preferred, or the candidate must have plans of obtaining their PE., • Experience with Revit and other CAD skills is preferred., • Relevant areas of experience includes:, • Application of various types of heating, ventilation, air conditioning, and hydronic piping systems, • Heating and cooling load calculations, • HVAC controls systems and building/facility management systems, • ASME B31.1 Power Piping or ASME B3.9 Building Services Piping designs, • International Mechanical Code, Plumbing Code and Fire Code, • Performance of detailed HVAC and hydraulic pressure drop calculations, • Performance of Plumbing pipe sizing and fixture count analysis, • SMANCA Duct Construction Standards, • NFPA 820 HVAC designs, • Hot water boiler and chilled water system design, • Must be Authorized to work in the US Preferred Qualifications: It is preferable to have experience in the HVAC systems related to water and wastewater facilities, although relevant experience in municipal, industrial or commercial buildings and facilities is acceptable. What We Offer: • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: Supervises two or more full time employees in an assigned plant or department. Plans and coordinates activities of workers to perform maintenance services, installation or repairs in one or more skills areas such as plumbing, mechanical, electrical repairs, pneumatic, hydraulic, installation, carpentry, painting or vehicle servicing. Primary Duties/Responsibilities: • Perform job duties in a safe manner compliant with policies, procedures and practices., • Model professional behavior; report to work as scheduled, on time and prepared to work., • Commitment to promoting and creating a safety centric culture and positive work environment., • Select, supervise and train staff to ensure implementation of management directives and the ongoing availability of qualified staff., • Develop, Administer and Manage departmental budget., • Interacts with other front-line supervisors, managers, operators and shift supervisors to guarantee the efficient, safe and permit compliant operation of the system., • Interacts with client as necessary for reporting on, maintaining or operating the system in an efficient, safe and permit compliant manor., • Fill in for absent supervisors as directed., • Support client capital projects., • Required to be administratively proficient and detailed oriented to manage key performance indicators along with project management., • Participates in the development of weekly, monthly, quarterly and annual work schedule., • Is comfortable dealing with the competing priorities and missions within the company., • Directs assigned staff and contractors in the performance of approved maintenance activities. This includes pre-planned and unplanned work on a daily basis., • Maintain a safe, neat and clean work environment this includes work area and equipment., • Instructs staff in the best methods, materials, tools, and equipment required., • Provides feedback, coaching, opportunity, and decision-making authority to employees to keep them actively engaged and able to improve their work situation and company processes., • Is fair and deals objectively with workplace situations. Effectively disciplines employees as needed., • Other duties as may be assigned. Work Environment: • Incumbent will be exposed to varied temperature extremes, noise, fumes, odors, confined spaces, elevated heights, depths (up to 300 ft underground), dust, sitting for prolonged times in front of the computer., • Spends 50% of time in operations environment and 50% of time in an office environment., • May need to work outside in inclement weather conditions and drive company vehicle to perform duties., • Occasional travel for training or meetings., • This function is largely in an industrial environment., • Will require frequent visits to maintenance and repair locations.Qualifications Education/Experience/Background: • High School Diploma/GED is required., • Degree in a related field or equivalent related experience., • Three to seven years in various positions within a chemical processing or water / wastewater treatment environment with knowledge of methods, principles and practices of operating, maintaining and repairing plant equipment, instrumentation and associated systems., • Lead experience or supervisory training required with understanding of human relations, training, performance evaluation and health and safety. Knowledge/Skills/Abilities: • Must have an understanding of process engineering, water quality assurance, maintenance strategy and laboratory procedures., • Must demonstrate effective skills in troubleshooting, problem solving and team building., • Must have a general knowledge of budget preparation and understanding of cost control., • Demonstrated excellent verbal communications and interpersonal skills in order to interface with and motivate all levels of personnel., • Demonstrated ability to prepare accurate, timely, effective, complete and easily understood written communications and reports., • Proficiency in the care and use of all site specific, facility required PPE (Personal Protection Equipment)., • PC skills and knowledge of Google Workspace, word processing, spreadsheet and presentation software for preparing work related reports, charts, graphs and data submittal requirements. Ability to use computer systems for preparing work orders and purchase requisitions., • Must be able to serve rotational 24-hour emergency on-call if required by site., • Demonstrated commitment to compliance with applicable laws and regulations, the Company’s Code of Business Conduct and other Company policies and procedures. Physical Requirements: • Bending, Standing, lifting and carrying up to 50 lbs., climbing ladders, walking, climbing and balancing, stooping, crouching, crawling and smelling. Additional Information Pay Range: $110000 to $120000 per year. Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Sick leave – 56 hours; Observed Holidays – 11 days; Vacation – Flexible Time Off Eligible for up to 5% Annual Performance Bonus We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job DescriptionHaddad Plumbing and Heating Inc. is seeking a Purchasing Clerk to join our team at our headquarters in Newark, New Jersey. The Purchasing Clerk will support the Purchasing department by accurately entering and maintaining purchasing, inventory, and vendor data across Excel and internal systems. This role is responsible for processing purchase orders, tracking materials, maintaining organized records, and communicating with vendors and internal teams to support timely project execution. The ideal candidate will be detail-oriented, highly organized, and comfortable working with data and documentation in a fast-paced office environment. The Purchasing Clerk reports to the Purchasing Manager and plays a key role in ensuring purchasing accuracy and material availability for ongoing projects. Responsibilities: • Accurately verify incoming and outgoing materials, ensuring all items match purchase orders and delivery documentation, • Track and maintain inventory levels in accounting program, ensuring real-time accuracy of materials and supplies, • Create, process and manage purchase orders (POs), including tracking status and ensuring timely delivery, • Communicate with vendors to confirm pricing, availability and delivery timelines, • Follow up on outstanding or delayed orders and resolve discrepancies with vendors or internal teams, • Maintain organized records of purchase orders, invoices, packing slips and vendor communications, • Assist with inventory counts, cycle counts and reconciliation of discrepancies, • Generate and present reports on inventory levels, material usage, order status and variances, • Support Project Managers and field teams by ensuring timely procurement of materials for jobs, • Coordinate with Accounting to assist with invoice matching and purchase order verification, • Identify and report low stock levels, overstock situations, or potential material shortages, • Support continuous improvement of purchasing and inventory processes, • Assist with various data entry and administrative tasks as neededRequired Education and Experience, • High school diploma or equivalent, • Proficiency in excel and MS word, • Attention to detail, • Fast and accurate typing skillsCompensation $50,000 – $55,000 Annually Position Type and Expected Hours of Work This is a Full Time Position. Days and Hours of Work are Monday through Friday, 7:00 am – 5:00 pm.About Haddad Plumbing and Heating Inc.: Haddad Plumbing and Heating Inc. is a Commercial Plumbing and HVAC company dedicated to: Providing premier workmanship and consistent delivery of reliable plumbing, heating and HVAC systems. We deliver expertise and professionalism in a competitive marketplace, using innovative techniques and tools to enhance productivity and efficiency, and meet crucial deadlines. Our ultimate goal is deliver better cost returns that will deliver greater value. When Haddad Plumbing & Heating Inc. is awarded a new construction project, our managers apply their expertise to present a comprehensive proposal that meets all requirements. Our in-house drafters then create technical designs and plans to be used by construction engineers. Project managers work closely with the general contractor and team of supervisors to ensure that the project remains on schedule without sacrificing quality work. Finally, our team of project managers with plumbing and HVAC supervisors coordinate when and how plumbing and HVAC systems are synergized and implemented. With all projects, our goal is to earn our clients’ trust to be their plumbing and HVAC contractor of choice, now and in the future. Our success is measured by achieving our clients’ vision and objectives for the project, but going above and beyond their expectations as guided by our core values. Here at Haddad Plumbing and Heating Inc., we earn this privilege with our clients by providing best-in-class service, value, and quality in every project. Haddad Plumbing and Heating Inc. includes benefits such as health care, paid time off and retirement savings. Powered by JazzHR 0PcwjvI1ac

Job DescriptionCompany Description Uncommon Schools is a nonprofit network of high-performing public charter schools dedicated to providing an exceptional K-12 education in economically disadvantaged communities. Operating in Boston, Camden, New York City, Newark, and Rochester, we are committed to closing the college completion gap and preparing every student for college and beyond. Our students consistently exceed national benchmarks, reflecting our dedication to their success. We invest deeply in our educators, offering weekly coaching, feedback, and professional development to ensure excellence in teaching and leadership. Join us to work hard, do good, and make a lasting difference! Job Description Uncommon Schools is seeking a Senior HVAC Technician (Snr HVAC Tech) to join the charter network’s New Jersey Facilities team. This position provides an opportunity for an experienced HVAC technician with at least seven (7) years' relevant experience to work with a dedicated facilities group, deepen his/her technical skills, and help ensure that Uncommon provides well-maintained, comfortable, and safe educational facilities for our students and staff. Uncommon’s portfolio in New Jersey comprises buildings constructed from the very early 1900s through the early 2020s, operating HVAC systems dating from 1966 to the recent past few years. As ambient comfort is essential to a productive learning and teaching environment, the impact of this individual’s attentiveness will be felt and deeply appreciated across the region. Reporting to the Senior Manager, Facilities Management Team, the Senior HVAC Technician will perform all technical work necessary to inspect, maintain, repair, and modify HVAC system in our buildings. With expertise in HVAC – and to a lesser extent in construction and plumbing – in multi-family, schools, and commercial buildings, the successful candidate will be responsible for conducting minor HVAC projects and managing larger ones and ensuring they are completed on time and within budget. The Snr HVAC Tech will partner with senior Facilities team members and outside consultants on the planning, coordination, and supervision of mechanical construction and repair activities implemented by outside vendors, will ensure project timelines are met and ensure quality control standards are followed, mentor junior staff, and handle all HVAC-related communication with stakeholders. Uncommon values candidates who have the drive and ability to work hard, are highly self-motivated, are eager to take on and implement assignments and projects, and have a strong commitment to customer service and satisfaction. Safe, efficient, healthy, clean, comfortable, and reliable buildings are essential to Uncommon’s mission to deliver an excellent education to our students and a comfortable working environment to our dedicated staff. As a member of the NJ Facilities Team, the Senior HVAC Technician will • maintain current knowledge of the National Standard HVAC Code and other applicable building codes and perform all facets of the HVAC trade in accordance with those codes and in a safe and effective manner, • diagnose problems with HVAC systems, evaluate solutions to remedy issues, and provide sound recommendations to supervisors, • in emergency situations take immediate steps to contain the problem and restore the system to sound working condition, • in emergency situations maintain clear and consistent communication with stakeholders to apprise them of steps being taken to address the issue, • troubleshoot and repair all HVAC type systems currently available in the market, • maintain records of corrective and preventive work assignments received through an automated work order system (currently SchoolDude, soon ZenDesk), • assist onsite Facilities Managers and General Maintenance Workers with work projects or special assignments, • respond to campus emergency calls after hours as needed, • perform other duties as assignedQualifications Required Technical Skills: • Significant journeyman-level HVAC experience along with the trade knowledge to effectively understand and perform all facets of the HVAC trade in accordance with the National Standard Plumbing Code and other applicable codes, • Strong background in commercial heating projects large and small, including hot water boilers and gas furnaces, • Ability to read as-built plans for all buildings in portfolio, • Ability to read and interpret construction drawings, specifications, submittals, cut sheets, layouts, technical manuals, schematic drawings, and other HVAC-related trade documents, • Advanced knowledge of BMS systems and system operations, • Ability to procure replacement parts as needed to make all necessary repairs, • Ability to properly and safely use the tools of the trade and carry out all tasks expected of a Snr. HVAC Technician, • Ability to troubleshoot and repair refrigerant-driven cooling and heating equipment (heat pump systems), • Ability to troubleshoot and repair water-driven heating and cooling equipment, • Ability to troubleshoot and repair water or glycol pump systems, • Ability to troubleshoot and service chillers and cooling towers, • Ability to change filters and belts and clean coils as needed to ensure proper functioning of units, • Ability to troubleshoot and implement recommended repair/replacement of, • gas valves, • economizer motors and dampers, • compressors and contactors, • dampers, • chilled water and hot water pumps, • glycol injection units, • Ability to evacuate and top-off units with refrigerant General Technical Skills • Bachelor’s Degree equivalent or seven plus (7+) years of experience in the HVAC field, • Evidence of progressive responsibility and experience in HVAC field, with four plus (4+) years as head technician, • Ability to handle multiple projects simultaneously, • Familiarity with key building systems (HVAC, electrical, mechanical, plumbing), • Familiarity with OSHA and other Life Safety codes, etc., • Computer skills necessary to operate BMS system, • Facility with Microsoft office suite, • Strong organizational skills, attention to detail, and follow-through, • Ability to communicate effectively verbally and electronically with facilities staff, school staff, and vendors, • Available to work nights and weekends when necessary, • Extreme flexibility, with a strong work ethic and an entrepreneurial spirit to accommodate high level of responsibility and multiple priorities, • New Jersey low pressure black seal boiler, HVAC or other certificate, training, or licenses a plus, • Carry a current EPA card enabling technician to dispense of refrigerants, • Valid driver’s license and vehicle, • Strong capacity to operate independently Physical Requirements The physical requirements outlined below are representative of those that must be met by an employee to successfully perform the essential functions of this position. • Stand or walk for up to two (2) hours at one time, up to eight (8) hours per day, • Sit for fewer than two (2) hours during an eight (8)-hour day, • Lift or carry up to 35 pounds frequently and 100 pounds occasionally, • Lift up to 100 pounds to waist height and up to 35 pounds in a range of motions from floor to overhead, • Frequently use hands for simple grasping, fine manipulation, pushing or pulling, • Occasionally climb stairs or ladders, dig, or pull with forces up to 100 pounds, • Frequently bend, squat, kneel, knee stand, lift overhead, reach overhead, push, or pull, • Work outdoors in a variety of temperatures and environmental conditions, • Possess ability to work at heights, full range of body motions and physical agility, and ability to maintain balance Mission Alignment • Demonstrate a relentless drive to improve the minds and lives of students in and out of school, • Demonstrate a commitment to the schools’ rules, regulations, and safety procedures, • Implement and enhance the school’s systems and culture Create high accountability for oneself as well as for building staff and vendors #ZR Additional Information Our people are what make us Uncommon. We offer competitive compensation and comprehensive benefits that support the personal health, wellness, and finances of our staff and their families. Our compensation philosophy values equity & fairness and attracting & retaining top talent. Compensation Compensation for this role is between $43/hr to $50/hr. Starting pay is determined using various factors including but not limited to relevant professional experience, education, certifications, and tenure with Uncommon Schools. Benefits • Regional staff will have the same holidays and sustainability days as school-based staff in their region, and flexible summer PTO, • Extensive, best-in-class training and development, • Comprehensive health, dental, and vision insurance plans + pre-tax flexible spending (FSA), dependent care (DCFSA), and health saving accounts (HSA), • Financial Planning, • New Jersey Pension program, • Paid leave of absence options (parental, medical, disability, etc.), • Mental health and counseling support + wellness benefits *A detailed list of all benefits is located HERE. At Uncommon, we believe that a supportive and welcoming environment helps our students, staff, and community thrive. We are dedicated to building a team that brings a wide range of perspectives and experiences, reflective of the communities we serve---with over 70% of our staff identifying as people of color. Our organization values respect and open dialogue on important topics that shape our school culture. As an equal opportunity employer, Uncommon provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. We also ensure that individuals with disabilities receive all privileges and benefits associated with employment and are provided reasonable accommodations for the interview process and to perform core job functions. If you would like to request an accommodation, please email recruitment@uncommonschools.org.

Job Description *Position is located in MINOT, NORTH DAKOTA - Relocation is Required* NOW HIRING: EXPERIENCED SERVICE PLUMBER We’re looking for a skilled plumber who knows the trade and can get the job done right. If you don’t have at least 3 years of real plumbing experience, do not apply. This is not a training position. Requirements: • Minimum 3 years of hands-on service plumbing experience (residential or commercial)., • Clean driving record – you’ll be driving a company vehicle., • Must be able to lift, push, and pull heavy equipment, sometimes 100+ lbs when needed., • Work includes tight crawl spaces, stairs, attics, and sometimes heights – if you’re afraid of any of that, this isn’t the job for you., • Must know your way around basic hand and power tools., • Show up on time, work hard, and treat customers and coworkers with respect. We Offer: • Solid pay based on your experience, • Consistent work, year-round, • Good team, no nonsense If you’re an experienced plumber looking for steady work with a crew that values hard work and skill, we want to hear from you. Apply only if you meet the experience requirements. #hc207104

Job DescriptionHaddad Plumbing and Heating Inc. is seeking a Surveyor to join our field and project support team. The Surveyor will be responsible for performing accurate field layout and verification using Trimble survey equipment to support mechanical installation on projects. This role works closely with the Drafter & Layout Manager, drafters, and project managers to ensure all layout points, elevations, and reference data align with approved drawings and project specifications. The ideal candidate is detail‑oriented, technically skilled, and comfortable working both in an office setting and on active construction jobsites. The Surveyor reports to the Drafter & Layout Manager and plays a critical role in ensuring accurate installation, minimizing rework, and supporting overall project success. Responsibilities: • Operate and maintain Trimble survey equipment for accurate field layouts, • Input and verify all required project information into the survey equipment, • Collaborate with drafters and project managers to ensure accurate installation locations, • Verify dimensions, elevations, and reference points to ensure proper placement, • Maintain accurate records of layout points, measurements, and adjustments, • Conduct routine checks and calibrations of survey equipment to ensure precision, • Support field teams by providing as-built information when neededRequired Education and Experience, • Must have experience with Trimble equipment, including setup, operation, and basic troubleshooting, • Valid driver’s license and a good driving record, • Minimum of 3 years of surveying experienceCompensation $70,000 – $80,000 Annually Type and Expected Hours of Work This is a full-time position. Days and hours of work are Monday through Friday 7:00 am – 5:00 pm About Haddad Plumbing and Heating Inc.: Haddad Plumbing and Heating Inc. is a Commercial Plumbing and HVAC company dedicated to: Providing premier workmanship and consistent delivery of reliable plumbing, heating and HVAC systems. We deliver expertise and professionalism in a competitive marketplace, using innovative techniques and tools to enhance productivity and efficiency, and meet crucial deadlines. Our ultimate goal is deliver better cost returns that will deliver greater value. When Haddad Plumbing & Heating Inc. is awarded a new construction project, our managers apply their expertise to present a comprehensive proposal that meets all requirements. Our in-house drafters then create technical designs and plans to be used by construction engineers. Project managers work closely with the general contractor and team of supervisors to ensure that the project remains on schedule without sacrificing quality work. Finally, our team of project managers with plumbing and HVAC supervisors coordinate when and how plumbing and HVAC systems are synergized and implemented. With all projects, our goal is to earn our clients’ trust to be their plumbing and HVAC contractor of choice, now and in the future. Our success is measured by achieving our clients’ vision and objectives for the project, but going above and beyond their expectations as guided by our core values. Here at Haddad Plumbing and Heating Inc., we earn this privilege with our clients by providing best-in-class service, value, and quality in every project. Haddad Plumbing and Heating Inc. includes benefits such as health care, paid time off and retirement savings. Powered by JazzHR nGW64LouYb

Job Description At the direction of the Sr. Manager of Plant and Facilities, support all corporate facilities and its equipment including, HVAC, CD Air and test gas compressors, basic electrical work, high pressure plumbing, basic plumbing, basic construction, and perform special projects in support of growth and expansion for the Corporation. Deploy to troubleshoot and or diagnose and repair equipment and issues in all facilities throughout the corporation. Make assessments that may be used to determine the course of action for service and repairs from outside contractors if needed. Handle emergency service and repair issues following appropriate evaluations. REQUISITE SKILLS REQUIRED • Skilled in assessing industrial grade plumbing issues for potable water, cooling water and wastewater., • Skilled in troubleshooting Industrial grade plumbing for high purity gases at ultra-high pressure., • Skilled in advanced level troubleshooting and diagnosis of commercial/industrial HVAC systems to make service and/or repair recommendations., • Learn to help diagnose problems with CNC Machines., • Skilled in industrial high voltage electrical work, and troubleshooting, diagnosis, and Installation of electrical services. MINIMUM QUALIFICATIONS 5+ years’ experience in the field of facilities support EQUIPIMENT/MACHINERY USED Strong knowledge in hydraulic, pneumatic, and electronic control systems and components Salary Range:$27.00 To $50.00 Hourly PHYSICAL REQUIREMENTS Lifting up to 50 lbs. regularly Pushing, pulling, standing for long periods of time, manual dexterity, and visual acuity All candidates must meet the US persons criteria. Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We are an equal opportunity employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. All qualified applicants will be considered for employment without regard to these characteristics. Company DescriptionValcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Job Description About Us RENOVO is a trusted Property Preservation and Maintenance company—committed to delivering disciplined, cost-effective, and high-quality services. Our work reflects military-grade reliability, local expertise, and unwavering integrity. We specialize in preservation, maintenance, and rehabilitation services for both residential and commercial properties. Position Overview We are seeking a skilled and dependable experienced General Handyman Technician to join our growing team. The ideal candidate will have hands-on experience diagnosing, installing, and repairing household and commercial issues like electrical, plumbing, drywall, painting, roofing, garage doors, windows, flooring, tiles, etc with precision, quality, and professionalism. Key Responsibilities • Diagnose and troubleshoot various household and commercial issues accurately., • Perform installations, repairs, and replacements efficiently while maintaining quality standards., • Take detailed pictures of each job, including clear photos of product labels and completed work., • Prepare a thorough diagnosis report with recommended repair or replacement solutions and pricing estimates., • Maintain a clean and professional appearance at job sites., • Communicate effectively and courteously with customers, ensuring complete satisfaction., • Adhere to all scheduled appointments—punctuality and reliability are a must. Requirements • Proven experience in Handyman work - installation and repair (minimum 2 years)., • Strong understanding of various parts of electrical and plumbing systems., • Must own a reliable vehicle and be willing to travel up to 50 miles for work., • Possess all basic tools required for electrical repair and installation., • Excellent problem-solving and communication skills., • Professional, well-behaved, and customer-focused attitude., • Must be committed, punctual, hardworking, and maintain a positive reputation with clients. Why Work With RENOVO • Transparent and timely payments., • Continuous workflow from a trusted preservation company., • Supportive management and clear communication., • Opportunity to grow with a reliable and reputable brand. Powered by JazzHR pbH2HozACU

Job DescriptionBenefits: • Competitive salary, • Free uniforms, • Opportunity for advancement, • Free food & snacks, • Health insurance, • Company car, • Paid time off Ace Hardware's Ace Handyman Services is currently seeking a professional and experienced Craftsman or Handyman to join our team! Job Benefits: • Jobs scheduled Monday through Friday (8am to 5pm) - No weekend work., • Positive work environment., • Advancement opportunities into a well-paying lifelong career., • Locally owned company with the backing of a national brand, Ace Hardware., • Competitive pay (commensurate w/ experience), performance bonuses, and incentive programs, • W-2 status with the flexibility of an independent job, • Company vehicle after intro-period, tool allowances, • Health Insurance after intro-periodWe are one of North & Central NJ's top-rated handyman, repair, and remodeling companies. We provide homes and businesses throughout North & Central NJ with quality craftsmanship for all of their repair and remodeling needs. Our ideal candidate has exceptional customer service skills, is an independent thinker with strong problem-solving skills, and excellent communication skills. We are seeking an experienced and Multi-Skilled Craftsman or Handyman with solid knowledge of the trades. Proper Equipment: Not necessarily having every tool, but knowing what tools are needed for certain tasks. Trouble Shooting Skills: Must be a quick thinker and have the ability to be able to examine a problem situation and come up with a resolution in a prompt and professional manner. Excellent Communication Skills: Must be able to communicate with Management, Office Personnel, Fellow Employees, Homeowners, Suppliers, Property Managers and Commercial Customers. Presentable: • Clean-Cut appearance, • Own basic tools, • Decent looking vehicle (to start)Job Responsibilities, • Perform all types of quality repairs, • Carpentry, • Drywall repair, • Painting, • Tile work, • Basic plumbing and electricalQualifications, • Own vehicle and basic tools, • Strong work ethic and professional demeanor, • Excellent customer service skills, • Collaborative, optimistic, reliable, • Knowledgeable in multiple tradesWe pay our Craftsmen competitive wages, offer incentives, and the ability to grow with the company.

Job Description Job Description Position Overview :.We are seeking a professional mechanic with specialized expertise in sump pumps, piping systems, commercial plumbing, pumps, sewer pumps, and steam lines.The ideal candidate will have extensive hands-on experience with the installation, maintenance

Plumber/drain cleaning or Water Jet technicians use their skills to troubleshoot and provide solutions to residential and commercial sewer, drain and plumbing problems. Clear blockages on plumbing systems, clean drains and sewers using Roto-Rooter provided equipment and tools.

The Senior Operations Manager is responsible for the cost-effective operation, care, preventative maintenance, and long-term preservation of the physical assets of their assigned property. The Senior Operations Manager partners with the (Senior) General Manager to achieve property specific business metrics and goals primarily focused on physical operations, construction coordination, safety and health principles, contracted services oversight, and project management. Responsibilities: • Operate a clean, well maintained property providing guests with a positive shopping experience., • Oversee all physical assets to ensure they are maintained to required standards in the most economically efficient manner., • Prepare and manage multi-year ordinary capital and operating expense plans and projects to meet or exceed company expectations, while also identifying operating expense control strategies and tactics., • Develop strong tenant relationships through pre-construction and subsequent follow-up meetings with tenant contractors to regulate compliance with Rules and Regulations, specific lease requirements and timely completion of construction. Assist Tenant Coordination with as-built conditions, available utilities, and any known constraints., • Implement and administer all preventative maintenance programs and related vendor and contractor compliance for all applicable service and/or maintenance contracts., • Ensure property safety systems are code compliant, maintained and inspected, and federal required reports and safety documentation is maintained and posted., • Support the Safety, Health, and Environment program by incorporating GGP's Life Saving Principles into your work planning and execution., • Support corporate sustainability efforts to reduce the property's carbon footprint., • Understand and monitor utility consumption, utility rates structures, utility rebates through the use of new and existing building control technologies and Building Automation Systems (BAS) including (but not limited to) lighting controls (BMS/EMS), HVAC, fire/life safety alarm systems, irrigation control, and vertical transportation., • Manage and develop direct reports while ensuring compliance with all company policies and procedures., • Partner with multiple internal and external teams to achieve annual property business plans while delivering company goals., • Develop favorable relationships with local officials, government leaders, first responders, key stakeholders, and community organizations., • Review and approve invoices for accuracy and monitor for timely payment., • Oversee operations during a crisis situation (including natural disasters) ensuring the safety and security of all customers, tenants, guests and assets., • Strong understanding of industry, company, and market trends to execute on company strategy., • Continuously align team and employee development goals with organizational goals., • Participate in the Manager on Duty (MOD) schedule during non-office hours, including evenings, weekends, and holidays. MOD coverage may be defined as on call, when appropriate, and the MOD is required to be on-site at least one Saturday per month. The on-site requirements of the MOD will be determined and approved by leadership., • Other duties as assigned. Qualifications: • High school diploma or GED required., • Bachelor's degree preferred., • Strong understanding of commercial building systems, HVAC, plumbing and electrical systems, blueprints, CAD drawings and other schematics required., • 5+ years of experience in property or construction management required., • Strong leadership, interpersonal and relationship building skills., • Strong project management, organizational, and problem-solving skills., • Good working knowledge of financial analysis, budgeting, and forecasting., • Effective written and verbal communication skills, including strong public speaking abilities., • Ability to adapt to changing work environment., • Strong working knowledge of various computer software such as Microsoft Office Suite, Microsoft Teams, JDEdwards, Proliance; experience with Yardi is a plus., • Completion of OSHA General Industries 30-hour course preferred., • Industry designation from reputable industry organization such as, but not limited to ICSC, BOMA, or IREM is a plus. Core Competencies: Decision Quality, Strategic Mindset, Directs Work, Develops Talent, Builds Networks, Communicates Effectively, Being Resilient The physical demands described herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. While performing the duties of this job, the employee is required to do the following: • The employee is regularly required to sit; use hands to finger, handle, or feel; and talk or hear., • The employee frequently is required to stand, walk, and reach with hands and arms., • The employee is occasionally required to climb stoop, kneel, crouch, or crawl., • The employee may frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds., • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus., • The noise level in this work environment is usually moderate., • The employee is occasionally exposed to moving mechanical parts, high precarious places, fumes or airborne particles, toxic chemicals, and outside weather conditions. Compensation: Salary type: Exempt Pay Frequency: Bi-weekly Annual Base Salary Range: $105,000- $150,000 Annual Bonus: 20% Benefit Information: • Competitive compensation, • Medical, Dental and Vision beginning day 1, • 401(k) Company matching, • 401(k) Vests on Day 1, • Career development programs, • Charitable donation matching, • Generous paid time off (i.e., vacation, personal holidays, paid sick time), • Paid Volunteer Hours, • Paid Parental Leave, • Family planning assistance including IVF, surrogacy, and adoption options, • Wellness and mental health resources, • Pet insurance offering, • Childcare Assistance, • Commuter benefits, • A culture on our values of Act with Integrity, Build Mutual Trust, Take Initiative and Win Together. We are proud to create a diverse environment and are proud to be an equal opportunity employer. We are grateful for your interest in this position, however, only candidates selected for pre-screening will be contacted.

Category : Technical Support About TP TP is a global, digital business services company. We deliver the most advanced, digitally powered business services to help the worlds best brands streamline their business in meaningful and sustainable ways. With more than 500,000 inspired and passionate people speaking more than 300 languages, our global scale and local presence allow us to be a force of good in supporting our communities, our clients, and the environment. Benefits of working with TP include: • Paid Training, • Competitive Wages, • Full Benefits (Medical, Dental, Vision, 401k and more), • Paid Time Off, • Employee wellness and engagement programs TP and You Through a balanced high-tech and high-touch approach blended with deep industry and geographic expertise, we make people's lives simpler, faster, and safer. We help companies adapt quickly to changing needs, and are inspired to deliver only the best in all that we do. You will become a key contributor in making that happen. Did you know that our Chief Client Officer started her career at TP as an agent and advanced to the pinnacle of the company? At TP, the sky is the limit! • Work in a customer's home but may be exposed to extremes in temperature, humidity or wetness when in transportation., • May occasionally walk on slippery or uneven surfaces, • May have exposure to dust, gas, fumes or chemicals, • On occasion, you may use special visual or auditory protective equipment, • Will occasionally climb stairs and work off elevated surfaces, • Frequently work with biohazards for Commercial Technicians only, • Ability to sit, walk and crawl occasionally, • Ability to stand, squat, kneel and dexterity to bend/twist neck and waist, frequently, • Ability to use hands repetitively and power/simple grasp constantly, • Ability for fine manipulation of hands as well as pushing, pulling and reaching above and below shoulder level constantly, • Physical ability to lift, pull and push products up to 50 pounds frequently, • Physical ability to lift, pull and push products that weigh more than 100+ pounds occasionally, • Ability to carry items up to 6 feet occasionally, • 100% local daily travel required, • Must be able to work in the New York area, • Must be able to travel in (Manhattan subway) 5 mile radius to assistant clients, • Ability to travel to New Jersey location for training for 2-3 weeks at a time, • Must be able to handle 4-6 service calls per day,, • Must have a valid driver's license, • High school diploma or general education degree (GED), • Flexible to work Monday-Friday and any 8 hours between 7AM-5PM, • Knowledge of basic plumbing and electrical skills, • Good computer skills with knowledge of Microsoft Office, • Ability to apply concepts of basic math, • Ability to read, write and comprehend instructions, correspondence, and memos in English, • Ability to multi-task Ability to work professionally with colleagues and be a team player, • Ability to manage difficult customer situations, • Must be self-motivated, customer-oriented person with excellent communication skills, • Must pass mandatory background checks which may include pre-screening, illegal drug tests and credit checks Required Skills BEST Skills Process Excellence Collaboration Communication Emotional Intelligence Open-Mindedness Critical Thinking Solution Orientation Entrepreneurship AI Proficiency Data Literacy Be Part of Our TP Family It is our mission to always provide an environment where our employees feel valued, inspired, and supported, so that they can bring their best selves to work every day. We believe that when employees are happy and healthy, they are more productive, creative, and engaged. We are committed to providing a workplace that is conducive to happiness and a healthy work-life balance. We also believe that to be our best selves, we need to be surrounded by people who are positive, supportive, and challenging. We are committed to creating a culture of inclusion and diversity, where everyone feels welcome and valued. TP is an Equal Opportunity Employer

The Senior Operations Manager is responsible for the cost-effective operation, care, preventative maintenance, and long-term preservation of the physical assets of their assigned property. The Senior Operations Manager partners with the (Senior) General Manager to achieve property specific business metrics and goals primarily focused on physical operations, construction coordination, safety and health principles, contracted services oversight, and project management. Responsibilities: • Operate a clean, well maintained property providing guests with a positive shopping experience., • Oversee all physical assets to ensure they are maintained to required standards in the most economically efficient manner., • Prepare and manage multi-year ordinary capital and operating expense plans and projects to meet or exceed company expectations, while also identifying operating expense control strategies and tactics., • Develop strong tenant relationships through pre-construction and subsequent follow-up meetings with tenant contractors to regulate compliance with Rules and Regulations, specific lease requirements and timely completion of construction. Assist Tenant Coordination with as-built conditions, available utilities, and any known constraints., • Implement and administer all preventative maintenance programs and related vendor and contractor compliance for all applicable service and/or maintenance contracts., • Ensure property safety systems are code compliant, maintained and inspected, and federal required reports and safety documentation is maintained and posted., • Support the Safety, Health, and Environment program by incorporating GGP's Life Saving Principles into your work planning and execution., • Support corporate sustainability efforts to reduce the property's carbon footprint., • Understand and monitor utility consumption, utility rates structures, utility rebates through the use of new and existing building control technologies and Building Automation Systems (BAS) including (but not limited to) lighting controls (BMS/EMS), HVAC, fire/life safety alarm systems, irrigation control, and vertical transportation., • Manage and develop direct reports while ensuring compliance with all company policies and procedures., • Partner with multiple internal and external teams to achieve annual property business plans while delivering company goals., • Develop favorable relationships with local officials, government leaders, first responders, key stakeholders, and community organizations., • Review and approve invoices for accuracy and monitor for timely payment., • Oversee operations during a crisis situation (including natural disasters) ensuring the safety and security of all customers, tenants, guests and assets., • Strong understanding of industry, company, and market trends to execute on company strategy., • Continuously align team and employee development goals with organizational goals., • Participate in the Manager on Duty (MOD) schedule during non-office hours, including evenings, weekends, and holidays. MOD coverage may be defined as on call, when appropriate, and the MOD is required to be on-site at least one Saturday per month. The on-site requirements of the MOD will be determined and approved by leadership., • Other duties as assigned. Qualifications: • High school diploma or GED required., • Bachelor's degree preferred., • Strong understanding of commercial building systems, HVAC, plumbing and electrical systems, blueprints, CAD drawings and other schematics required., • 5+ years of experience in property or construction management required., • Strong leadership, interpersonal and relationship building skills., • Strong project management, organizational, and problem-solving skills., • Good working knowledge of financial analysis, budgeting, and forecasting., • Effective written and verbal communication skills, including strong public speaking abilities., • Ability to adapt to changing work environment., • Strong working knowledge of various computer software such as Microsoft Office Suite, Microsoft Teams, JDEdwards, Proliance; experience with Yardi is a plus., • Completion of OSHA General Industries 30-hour course preferred., • Industry designation from reputable industry organization such as, but not limited to ICSC, BOMA, or IREM is a plus. Core Competencies: Decision Quality, Strategic Mindset, Directs Work, Develops Talent, Builds Networks, Communicates Effectively, Being Resilient The physical demands described herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. While performing the duties of this job, the employee is required to do the following: • The employee is regularly required to sit; use hands to finger, handle, or feel; and talk or hear., • The employee frequently is required to stand, walk, and reach with hands and arms., • The employee is occasionally required to climb stoop, kneel, crouch, or crawl., • The employee may frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds., • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus., • The noise level in this work environment is usually moderate., • The employee is occasionally exposed to moving mechanical parts, high precarious places, fumes or airborne particles, toxic chemicals, and outside weather conditions. Compensation: Salary type: Exempt Pay Frequency: Bi-weekly Annual Base Salary Range: $105,000- $150,000 Annual Bonus: 20% Benefit Information: • Competitive compensation, • Medical, Dental and Vision beginning day 1, • 401(k) Company matching, • 401(k) Vests on Day 1, • Career development programs, • Charitable donation matching, • Generous paid time off (i.e., vacation, personal holidays, paid sick time), • Paid Volunteer Hours, • Paid Parental Leave, • Family planning assistance including IVF, surrogacy, and adoption options, • Wellness and mental health resources, • Pet insurance offering, • Childcare Assistance, • Commuter benefits, • A culture on our values of Act with Integrity, Build Mutual Trust, Take Initiative and Win Together. We are proud to create a diverse environment and are proud to be an equal opportunity employer. We are grateful for your interest in this position, however, only candidates selected for pre-screening will be contacted. #GGP

A growing commercial solutions provider is seeking a driven, field-based Strategic Account Executive to expand its footprint in the dynamic NYC Metro construction market. This person will play a pivotal role in building relationships with general contractors, driving project wins, and increasing market share in a fast-paced and opportunity-rich environment. This is an ideal role for a true hunter who wants the freedom to build their own book of business with the full support of a nimble and well-resourced team. Key Benefits: • Strong base salary, with performance incentives and uncapped earnings potential, • High autonomy and direct access to leadership, • Comprehensive benefits including 401(k) with company match and profit-sharing, • High-growth environment with flexible structure options, • Recognized for superior customer service and market agility What You'll Do: • Establish and grow relationships with general contractors, estimators, and purchasing teams throughout the NYC Metro and Northern NJ areas, • Consistently generate new business opportunities and move them through the full sales cycle, • Lead bids, coordinate pricing strategies, and negotiate scope and margin, • Partner with internal estimating and operations teams to ensure seamless execution and customer satisfaction, • Expand wallet share within existing accounts through strategic follow-up and service, • Maintain accurate sales data and activity reporting in CRM platforms Ideal Candidate Profile: • Demonstrated success selling into the NYC commercial construction space, • Strong existing network of general contractor contacts, • Hunter mindset with a history of consistently opening new accounts, • Ability to read and understand construction documentation and bid packages, • Lighting industry experience a plus, but not required, • CRM and sales process expertise, • Self-motivated with excellent communication and follow-through skills Preferred Backgrounds: • Candidates with a proven track record in lighting or electrical sales to GCs, • Experienced sellers from trades like HVAC, plumbing, or fire protection who know the NYC GC landscape and are open to learning lighting About Blue Signal: Blue Signal is an award-winning, executive search firm specializing in sales & business development recruiting. Learn more at bit.ly/3NNY1wM

Job Description Buildings and Grounds Maintenance Tech Job Description pdf 1.docx ( CLICK LINK FOR FULL JOB DESCRIPTION ) Job Title: Maintenance Technician Organization: Unified Vailsburg Service Organization (UVSO) Location: Newark, NJ (Multiple Campus Sites) Job Type: Full-Time About the Role: UVSO is seeking a skilled and reliable Maintenance Technician to maintain our campus of residential and commercial properties. This vital role ensures our facilities and grounds are clean, safe, and functional for our staff, visitors, and community partners. Key Responsibilities: Perform general maintenance and repairs, including carpentry, electrical, plumbing, and painting. Set up and break down rooms for meetings and events. Conduct routine building checks and complete daily work reports. Maintain adjacent walkways and grounds, including snow removal. Transport supplies between campus locations. Open and close buildings following security protocols. Assist with shipping and receiving. Qualifications: Minimum of 2 years of experience in building cleaning and maintenance. Strong mechanical aptitude and physical dexterity. Ability to lift 15-75 lbs and work in various weather conditions. Valid NJ Driver’s License required. Excellent customer service skills and a courteous demeanor. Formal training in plumbing, HVAC, or general contracting is a plus. Must be available to work evenings and weekends on a rotating schedule.

Job Description CRM Residential has been a trusted name in the property management industry for over 46 years specializing in affordable housing. Our success story is a testament to the dedicated and talented individuals who have chosen to build their careers with us. We take great pride in our values, and we live and breathe them every day. Working at CRM Residential is so much more than a job, it is a career with purpose. No matter what department or level of the company you join, our mission is to provide a comfortable and reliable home environment for those who need it most and to provide excellent service to our customers. You will make a difference. Why Join the CRM Residential Team: • Comprehensive Health Coverage, • Retirement Savings with employer contribution, • Bonus Potential, • Paid Time Off (PTO), • Company Paid Holidays, • Once eligible for enrollment, the company will contribute a Safe Harbor match of 3% of your compensation to your 401(k) account, regardless of whether you choose to make your own contributions.Pay Rate: $17.00-$19.00 per hour What You’ll Get To Do: The Maintenance Technician will receive general supervision and direction from the Community Manager. The Maintenance Technician will comply with established policies and procedures and not act contrary to such guidelines without Community Manager approval. The Maintenance Technician will be responsible for but not limited to: • Conducting routine maintenance tasks such as changing light bulbs, unclogging drains, and fixing leaky faucets, • Performing minor repairs such as drywall patching, painting, and carpentry work, • Maintaining the property's grounds, including lawn care, snow removal and cleaning of common areas, • Responding to tenant requests for repairs and maintenance issues, • Conducting regular inspections and identifying potential maintenance issues before they become major problems, • Assisting with major repairs or renovations as needed Requirements: • High School diploma or equivalent education required. 3-4 years of experience can offset minimum educational requirements for this position., • 2 years of maintenance technician experience, • Must have experience in plumbing, electrical, carpentry, painting and general maintenance., • Previous experience in commercial or multi-unit residential property is desirable. Experience level may vary due to the special needs of the property., • The position requires effective oral and written communication skills, • Maintains current license/certificate and/or specialized skills in at least one (or more) of the following building trades: electrical, plumbing, carpentry, HVAC, fire protection or mechanical., • Valid driver's license and reliable transportation, • Must live within 20 miles (30 minutes) from the property, • Full Time Schedule: Monday-Friday, 8:00am-4:30pm, • Must be willing to be on-call 24/7 Physical/Working Requirements: • Indoor/outdoor environment subject to changing conditions and temperatures exceeding 90 degrees at times, • Ability to lift 55 pounds independently and support team lift with reasonable accommodations, • This job involves walking and standing for long periods as well as stooping, squatting, lifting, carrying, pushing and climbing. Working on ladders at varying heights, • Possible contact with blood borne pathogens and /or bodily fluids About CRM Residential: CRM Residential is an award-winning full-service property management company which professionally manages 11,000+ apartments valued in excess of one billion. We are exclusively third-party so there is no conflict of interest between the properties that we manage for our clients and our own properties, because we do not own any properties. Our focus is dedicated to our clients. We are an equal opportunity employer and welcome applicants from all backgrounds to apply. If you have a passion for property maintenance and a desire to work for a reputable company, we encourage you to apply for this exciting opportunity. Powered by JazzHR X2OH0URohH

Job DescriptionDescription: About our organization Our New Jersey 82,000 square foot facility includes the largest emergency contact center in the United States. Our Houston Texas facility includes a fully redundant emergency contact center supported by a diverse talent hub. These two critical infrastructure facilities are staffed and operated 24/7/365 and require best-in-class uptime. They include high-availability data centers that have the highest uptime expectations that exist. Our business operates 24/7/365, and that means our facilities teams must support an employee population that includes a significant number of hard-working contact center employees at our three call center locations across the United States. About the Role You are responsible for technical ownership of all building systems across two Class A office buildings and one fulfillment center. This is a senior level, hands-on role focused on proactive maintenance, advanced troubleshooting, system reliability, and Class A service standards. You will reduce vendor reliance through first level diagnostics and repair. You will lead preventive maintenance execution and provide technical guidance to the Facilities Technician. This role requires strong commercial HVAC, plumbing, and electrical troubleshooting experience.? Role and Responsibilities: • Oversee 17 rooftop HVAC units; diagnose airflow, condensate, control, and electrical faults; interpret schematics; track service history; assess repair vs. replacement; escalate major failures., • Troubleshoot electrical systems up to 277V; replace components (ballasts, drivers, switches, outlets); resolve recurring faults; maintain panel accuracy; follow LOTO protocols., • Diagnose and repair minor plumbing issues; identify developing wear., • Maintain dock levelers, overhead doors, and fulfillment equipment; monitor up time and repeat failures., • Support life safety compliance: conduct fire extinguisher inspections, inspect emergency systems, assist with sprinkler/fire panel checks, & maintain audit documentation., • Own preventive maintenance program and inspection cadence; conduct weekly building walks; mitigate risks pre-failure; reduce emergency work orders., • Manage work orders in Maintenance Care; prioritize same-day resolution; track labor/materials; maintain asset logs; perform root cause analysis; deliver monthly system condition reports., • Maintain Class A finish quality; respond promptly to leadership requests; minimize operational disruption; uphold professional presentation and conduct.Requirements: Essential Qualifications: • 7+years commercial building maintenance experience., • Strong rooftop HVAC troubleshooting background., • Ability to read electrical, mechanical, & plumbing drawings., • Experience in high-end corporate office environment preferred., • Proven track record of proactive system management. What's In It for You? • Great pay and excellent comprehensive benefits package, • Chance to work with an experienced and talented leadership group, • Entrepreneurial work environment with the freedom to get things done, • Make a true impact on our company with high visibility, • Beautiful offices Benefits and Perks • Excellent Comprehensive Insurance Coverage, • 401(k) Retirement Savings, • Access to Corporate Discounts, • Commuter Benefits, • Company Paid Life Insurance, • And much more… Affiliated Monitoring is committed to a diverse and inclusive workforce, one that reflects the varied communities we serve. The services we offer and the products we build greatly benefit from a range of perspectives, which can only come from diversity of all types at all levels of the organization. Achieving true diversity and inclusion is the right thing to do and is also the smart thing for our business. We strongly encourage women, veterans, people with disabilities, people of color and gender nonconforming candidates to apply. Affiliated Monitoring is an Equal Opportunity Employer and does not discriminate on the basis of an individual's sex, age, race, color, creed, national origin, alienage, religion, marital status, pregnancy, sexual orientation, gender identity and expression, disability, genetic trait or predisposition, carrier status, citizenship, veteran or military status and other personal characteristics protected by law. All applications will receive consideration for employment without regard to legally protected characteristics.