Trabajos computer hardware en Rockville Centre, New YorkCrear alertas

Job Description Overview We create communities where employees thrive in their work, helping our residents thrive in their homes. Atria Senior Living’s family of brands has openings for individuals looking for a career with outstanding benefits, including: • Paid holidays and PTO, • Employees may receive annual anniversary rewards dependent on classification, starting at $500 for Full Time employees, • Employees may be eligible to receive an Annual Scores Reward of $500 (Full Time) or $250 (Part Time) based on community survey results, • Benefits package also includes Health, Dental, Vision, and Life Insurance, • Retirement Savings Plan / 401(k) employer match As a valued team member at Atria, you’ll work in a supportive environment that provides advancement opportunities and promotes a healthy work-life balance. Apply now! Responsibilities • Diagnose and repair problems in such areas as HVAC, electrical, plumbing, major appliances, carpentry, emergency systems, flooring, hardware accessories, masonry, painting/wallpaper, water features (pools, spas, etc.) and waste management systems., • Complete assigned service requests and repairs consistent with company operating and equipment/supply standards and in a safe and timely manner., • Perform turn-key work as required to ensure vacant apartment homes are rent-ready in a timely manner., • Maintain customer service standards. Respond to resident requests and work with residents to minimize/resolve problems and complaints. Follow-through to ensure issue is resolved., • Apply all applicable Atria Policies and Procedures such as, but not limited to, company operating and safety standards. Promote safe work practices among on-site staff., • Ensure compliance with all federal, state and local laws, specifically Fair Housing regulations, building codes and environmental laws and regulations., • Assist with organizing and prioritizing service requests and general maintenance tasks., • May drive company vehicle from community to social and other various destinations (only if required by community)., • May supervise the work of other associates and outside contractors., • May perform other duties as assigned. Qualifications • High School diploma or equivalent (GED) preferred., • 1 year experience in property management maintenance performing the duties associated with a Maintenance Technician., • Able to perform basic arithmetic skills such as measurement, addition, subtraction, multiplication and division in order to do basic calculations and analysis such as estimating, determining averages and percentages, and totals., • Able to occasionally operate general office equipment such as, but not limited to, personal computer, telephone, photocopying machine, facsimile machine and postage machine., • Able to frequently use general maintenance tools, supplies and equipment such as, but not limited to, hand tools, pressure washers, blowers, paint equipment, pool chemicals, ice removal equipment, ladders, landscaping equipment, sanders and safety equipment., • Able to frequently handle and use chemicals and general cleaning supplies., • Position requires driving responsibilities (may use Company provided vehicle and/or personal vehicle)., • Must possess valid driver’s license., • Must satisfactorily meet and be in compliance with Atria motor vehicle policy standards.

Job Description Our mission is simple: we want to partner with you to find the right position for your future. Our SWAT team approach is based on our ability to align your expertise with our clients’ needs to forge long-lasting partnerships. Gr8ttek is looking for a regular Field Specialist to join its Infrastructure Delivery team. Reporting to the Territory Supervisor the Field Specialist will perform a variety of hardware-focused, break fix services and solutions on various client products. Candidates must possess the ability to perform basic and moderately complex troubleshooting and repair activities. Position may require the exercise of moderately complex analytical skills and to make decisions based on established department and company guidelines. Benefits: $40 per call/$5 per call per diem Responsibilities and Skills • Providing customer break fix support for designated equipment, • Communicating clearly in written and verbal form, • Possess excellent customer service skills, • Accepting and delivery of all service calls assigned, • Completing all administrative tasks associated with each call, • Responsible for control and return of assets and inventory, • Other duties may be assigned to meet business needs, • May provide functional guidance to colleaguesRequirements, • Typically requires technical school certification or equivalent and 1-2 years of relevant experience, • Ability to drive yourself to client locations, • Ability to lift and or move various computer equipment up to 50 lbs., • Valid driver’s license, • Reliable transportation with valid registration and adequate insurance Additional requirements may exist if offer of employment is extended jev33NIJBP

Job Description Our mission is simple: we want to partner with you to find the right position for your future. Our SWAT team approach is based on our ability to align your expertise with our clients’ needs to forge long-lasting partnerships. Gr8ttek is looking for a regular Field Specialist to join its Infrastructure Delivery team. Reporting to the Territory Supervisor the Field Specialist will perform a variety of hardware-focused, break fix services and solutions on various client products. Candidates must possess the ability to perform basic and moderately complex troubleshooting and repair activities. Position may require the exercise of moderately complex analytical skills and to make decisions based on established department and company guidelines. Benefits: $40 per call/$5 per call per diem Responsibilities and Skills • Providing customer break fix support for designated equipment, • Communicating clearly in written and verbal form, • Possess excellent customer service skills, • Accepting and delivery of all service calls assigned, • Completing all administrative tasks associated with each call, • Responsible for control and return of assets and inventory, • Other duties may be assigned to meet business needs, • May provide functional guidance to colleaguesRequirements, • Typically requires technical school certification or equivalent and 1-2 years of relevant experience, • Ability to drive yourself to client locations, • Ability to lift and or move various computer equipment up to 50 lbs., • Valid driver’s license, • Reliable transportation with valid registration and adequate insurance Additional requirements may exist if offer of employment is extended NPQnOmURuQ

Job Description Our mission is simple: we want to partner with you to find the right position for your future. Our SWAT team approach is based on our ability to align your expertise with our clients’ needs to forge long-lasting partnerships. Gr8ttek is looking for a regular Field Specialist to join its Infrastructure Delivery team. Reporting to the Territory Supervisor the Field Specialist will perform a variety of hardware-focused, break fix services and solutions on various client products. Candidates must possess the ability to perform basic and moderately complex troubleshooting and repair activities. Position may require the exercise of moderately complex analytical skills and to make decisions based on established department and company guidelines. Benefits: $40 per call/$5 per call per diem Responsibilities and Skills • Providing customer break fix support for designated equipment, • Communicating clearly in written and verbal form, • Possess excellent customer service skills, • Accepting and delivery of all service calls assigned, • Completing all administrative tasks associated with each call, • Responsible for control and return of assets and inventory, • Other duties may be assigned to meet business needs, • May provide functional guidance to colleaguesRequirements, • Typically requires technical school certification or equivalent and 1-2 years of relevant experience, • Ability to drive yourself to client locations, • Ability to lift and or move various computer equipment up to 50 lbs., • Valid driver’s license, • Reliable transportation with valid registration and adequate insurance Additional requirements may exist if offer of employment is extended 2YZ9AmjZMQ

Job Description Job Location: Adelphi University, Garden City Job Dates: June 22 to August 14, 2026 (candidates do not need to be available every week but must be available for most weeks) Job Hours: Monday to Friday, 8am to 3:45pm Pay Rate: $17 per hour Lavner Education is seeking passionate and engaging individuals who want to grow their tech, teaching, and leadership skills in a fun and rewarding environment this summer. Gain hands-on STEM experience, build your resume, and make a positive impact teaching students this summer! WHY JOIN CAMP TECH REVOLUTION? • Gain meaningful STEM, teaching, and leadership experience, • Paid position, • Build your resume, • Excellent letters of recommendation for great work, • Detailed curriculum and full-time support, • Receive training from EdTech experts in the field, • Become a valued member of Lavner Education's robust network of team members, alumni, and affiliates across the educational landscape Lavner Education, one of the world's leading EdTech companies for kids, powers the Lavner Camps, Tech Revolution, Lavner IQ, and Lavner Fitness brands, offering year-round camps, classes, tournaments, and online tutoring to kids worldwide. Whether at locations like UPenn, NYU, WashU, UW-Seattle, and UCLA, or through online camps and private instruction, our multi-layered approach to education is redefining the industry like never before. By embracing the concept that kids should love what they do and have the opportunity for high-quality live, interactive learning in an inclusive environment, we create cutting-edge learning experiences that feature top-notch curricula and superstar instructors, all backed by a dedicated and mission-driven leadership team. JOB RESPONSIBILITIES • Deliver quality, educational instruction to elementary and middle school-aged students in a class and one-on-one environment from the provided curriculum for STEM topics including Coding, Robotics, Minecraft, Roblox, Game Design, Video Production for YouTube, STEM & Medicine, 3D Modeling, All-Girls STEAM, Science, Digital Art, Graphic Design, Filmmaking, Digital Animation, and more, • Assist with the setup and maintenance of on-site computer hardware, software, and internet connectivity, • Provide ongoing troubleshooting and technical support to staff and students, • Communicate tech issues quickly and effectively to company headquarters and offer solutions, • Perform weekly inventory management and tracking, • Be a positive role model for campers and staff, arriving every day with an inclusive, professional, and upbeat attitude QUALIFICATIONS • Education, training, or experience in Computer Science, Education, Engineering, Graphic Design, Digital Art, Digital Animation, Film, or related STEM fields, • A background in working with kids and teens is highly recommended, but not required, • Willingness to perform all job duties with enthusiasm and a positive outlook, • Deep appreciation for teamwork and drive to be part of a high-level team, • Candidates must demonstrate flexibility, leadership abilities, and strong communication skills, • Required clearances, or ability to obtain them prior to start date. Lavner Education will reimburse employees for the costs of clearances if they need to be obtained ARE YOU READY TO JOIN OUR TEAM? We understand your time is valuable and that is why we have a quick and easy initial application process. If you feel that this position would be a great fit for you, please fill out our quick mobile-friendly application so we can review your information. We look forward to meeting you! For more information on our summer tech camps and locations please visit lavnercamps.com Email: Job Posted by ApplicantPro Company DescriptionLavner Education, one of the world's leading EdTech companies for kids, powers the Lavner Camps, Tech Revolution, Lavner IQ, and Lavner Fitness brands, offering year-round camps, classes, tournaments, and online tutoring to kids worldwide. Whether at locations like UPenn, WashU, NYU, University of Washington, and UCLA, or through online camps and private instruction, our multi-layered approach to education is redefining the industry like never before. By embracing the concept that kids should love what they do and have the opportunity for high-quality live, interactive learning, we create cutting-edge learning experiences that feature top-notch curricula and great staff, all backed by a dedicated and mission-driven leadership team.Lavner Education, one of the world's leading EdTech companies for kids, powers the Lavner Camps, Tech Revolution, Lavner IQ, and Lavner Fitness brands, offering year-round camps, classes, tournaments, and online tutoring to kids worldwide. Whether at locations like UPenn, WashU, NYU, University of Washington, and UCLA, or through online camps and private instruction, our multi-layered approach to education is redefining the industry like never before. By embracing the concept that kids should love what they do and have the opportunity for high-quality live, interactive learning, we create cutting-edge learning experiences that feature top-notch curricula and great staff, all backed by a dedicated and mission-driven leadership team.

Job Description Company: Schultheis & Panettieri, LLP Position: IT Network Systems/Desktop Support Technician Job Location: Floral Park, NY Salary Range: $65,000 Schultheis & Panettieri, LLP is looking for a full-time IT Network/Desktop Support Technician to service our medium sized accounting firm. The right candidate will exhibit a positive attitude while taking responsibility for providing timely service and support to our Staff. IT support will include desktop support and network administration on Microsoft-based servers, workstations, firewalls, backups and all associated hardware and software. This position will allow you to hone your project management skills by participating in the new project life-cycle from inception including the research, design, documentation, configuration, and execution of the projects. The prospective candidate must be detail-oriented, possess excellent communication skills, and will be expected to continue developing their skills while servicing our staff in our Hauppauge or Floral Park offices. Responsibilities • Provide end users with computer hardware & software help desk support, • Troubleshoot and resolve issues on servers, workstations and network infrastructure, • Setup and configuration of workstations, printers, scanners, etc., • Assist with software upgrades, • Setup and configuration of firewalls, routers, backup devices. Knowledge of: • Windows Server Operating Systems, • Firewalls, Routers, and other network devices, • Network Server technology and infrastructure., • Microsoft Office Suite and other standard desktop applications, • Managed Services software. (NinjaRMM, Connectwise), • Backup technologies and Antivirus applications (Datto, Webroot), • Group Policy and Active Directory, • Microsoft Hyper-V - VMware Virtualization Solutions., • VPN environments including DNS, and TCP/IP, • Ability to continually adapt in a dynamic, fast-paced, highly rewarding environment., • Ability to independently analyze problems and provide workable solutions, • Excellent communication skills Schultheis & Panettieri provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description Senior Structural Engineer - Garden City, New York About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. EDUCATION AND/OR EXPERIENCE • Bachelor’s degree or higher in Mechanical or Aerospace Engineering or a related field, • Master’s degree preferred, • 5+ years of experience in a similar role SUMMARY OF POSITION The Senior Structural Engineer is responsible for leading intricate analyses to ensure our products will meet customer requirements. This role requires rigorous application of structural mechanics while adhering to manufacturing, testing, and quality best practices. The Senior Structural Engineer will engage in problem-solving daily and regularly present results to internal and external stakeholders. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Perform critical thermomechanical analyses of complex aerospace hardware through commercial analysis packages and hand calculations, working closely with the design team to rapidly iterate on new product development, • Peer review analyses produced by other structures engineers and subcontractors, • Liaise with customer on heat exchanger requirements, • Generate technical reviews, reports, and other engineering documentation, • Champion process improvement activities related to structural analysis, • Review and approve design changes and test procedures, • Support disposition of technical issues which occur during manufacturing, • Support customer reviews and inbound requests, • Support proposals and future product development QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Extensive experience performing structural analysis for mechanical components (aerospace preferred), • Expertise in commercial FEA software packages, • Expertise in material properties and selection process, • Knowledge of design principles, manufacturing processes, and assembly techniques, • Knowledge of 3D modeling and CAD software, • Knowledge of heat and mass transfer, fluid mechanics, and thermodynamics, • Knowledge of drawing ANSI standards and GD&T procedures, • Highly motivated self-starter, • Strong problem-solving skills, • Excellent attention to detail, • Strong verbal and written communication skills, • Capable of thriving in a fast-paced environment PHYSICAL DEMANDS • Ability to work for prolonged periods on a computer or in a lab environment, • Ability to move equipment up to 25 pounds OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $105,000 to $150,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job Description Lead Design Engineer - Garden City, New York About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. EDUCATION AND/OR EXPERIENCE • Bachelor’s degree or higher in Mechanical or Aerospace Engineering or a related field, • 8+ years of progressive engineering experience SUMMARY OF POSITION The Lead Design Engineer is responsible for overseeing the design and development of complex mechanical parts and assemblies. This role focuses on leading technical decision-making, ensuring design integrity, and driving innovation across projects. The Lead Design Engineer will play a key role in cross-functional collaboration, mentoring, and continuous improvement initiatives. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Lead the development of 3D models of complex aerospace hardware, • Prepare design concepts, sketches, layouts, technical drawings, and BOMs, • Serve as the primary technical point of contact for design-related decisions across new and existing products, • Interface with internal and external stakeholders to ensure manufacturability, • Certify technical reviews and other engineering documentation, • Lead cross-functional activities to sustain existing designs, • Manage complete implementation of engineering design change requests, • Lead resolution of technical issues during manufacturing and customer interactions, • Champion process improvement activities related to design engineering, • Support proposals and future product development QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Extensive experience as a Senior Mechanical Design Engineer, Technical Lead, or similar role, • Expertise in parametric CAD design, • Expertise in drawing ANSI standards and GD&T procedures, • Expertise in manufacturing techniques and processes, • Knowledge of material properties and selection process, • Knowledge of FMEAs and quality assurance processes, • Knowledge of relevant MIL-STD’s, • Familiarity with heat and mass transfer, fluid mechanics, thermodynamics, and structural mechanics, • Highly motivated self-starter, • Strong problem-solving skills, • Excellent attention to detail, • Strong verbal and written communication skills, • Capable of thriving in a fast-paced environment PHYSICAL DEMANDS • Ability to work for prolonged periods on a computer or in a lab environment, • Ability to move equipment up to 25 pounds OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $120,000 to $160,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job DescriptionJob Description Hours: Full-Time – 35 Hours Work Location: 30-30 Thomson Avenue, LIC, NY 11101 Only candidates who are permanent in the Computer Specialist (Software) title, those who are reachable on the Open-Competitive List (Exam #1139) may apply. Please include a copy of your Notice of Results card or indicate if you are already permanent in the title. If you do not meet the previously mentioned civil service criteria, you will not be considered for an interview. The NYC Department of Design and Construction, Technology and Innovation Division seeks to hire a Quality Assurance Analyst. The selected candidate will develop and execute exploratory and/or automated tests to ensure the product quality of DDC developed software solutions. Under the direction of Senior Project Management staff, and with latitude for independent initiative and judgment the QA Analyst will collaborate with the developer teams and business units, in designing comprehensive test plans and test cases. Additional duties include monitoring debugging process results and defining corrective actions; reviewing specifications and technical design documents and providing timely and meaningful feedback. The QA Analyst will also review system requirements and track quality assurance metrics; conduct tests before product launch to ensure software solutions run smoothly and meet the requirements; monitor all stages of software development to identify and resolve system errors and code discrepancies. Authorization to work in the United States is required for this position. NYC Department of Design and Construction does not provide sponsorship for international employees for visa applications, extensions or status changes, including STEM/OPT visas. Applicants are responsible for ensuring that they meet all qualifying requirements for this position, at the time of application. All applicants, including City Employees: Please go to NYC Government Jobs | Explore Careers | City of New York, go to Search for Open Jobs, and type in the Job ID # listed above. Submit job application as prompted. Do not apply via Employee Self-Service (ESS), e-mail, mail, or fax your resume to DDC directly. COMPUTER SPECIALIST (SOFTWARE) - 13632 Qualifications (1) A baccalaureate degree from an accredited college, including or supplemented by twenty-four (24) semester credits in computer science or a related computer field and two (2) years of satisfactory full-time software experience in designing, programming, debugging, maintaining, implementing, and enhancing computer software applications, systems programming, systems analysis and design, data communication software, or database design and programming, including one year in a project leader capacity or as a major contributor on a complex project; or (2) A four-year high school diploma or its educational equivalent and six (6) years of full-time satisfactory software experience as described in “1" above, including one year in a project leader capacity or as a major contributor on a complex project; or (3) A satisfactory combination of education and experience that is equivalent to (1) or (2) above. College education may be substituted for up to two years of the required experience in (2) above on the basis that sixty (60) semester credits from an accredited college is equated to one year of experience. A masters degree in computer science or a related computer field may be substituted for one year of the required experience in (1) or (2) above. However, all candidates must have a four year high school diploma or its educational equivalent, plus at least one (1) year of satisfactory full-time software experience in a project leader capacity or as a major contributor on a complex project. NOTE: In order to have your experience accepted as Project Leader or Major Contributor experience, you must explain in detail how your experience qualifies you as a project leader or as a major contributor. Experience in computer operations, technical support, quality assurance (QA), hardware installation, help desk, or as an end user will not be accepted for meeting the minimum qualification requirements. Special Note To be eligible for placement in Assignment Level IV, in addition to the Qualification Requirements stated above, individuals must have one year of satisfactory experience in a project leader capacity or as a major contributor on a complex project in data administration, database management systems, operating systems, data communications systems, capacity planning, and/or on-line applications programming. Additional Information The City of New York is an inclusive equal opportunity employer committed to recruiting and retaining a diverse workforce and providing a work environment that is free from discrimination and harassment based upon any legally protected status or protected characteristic, including but not limited to an individual's sex, race, color, ethnicity, national origin, age, religion, disability, sexual orientation, veteran status, gender identity, or pregnancy.

Job Description Test Engineer/Hardware Requirements - Garden City, New York About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. EDUCATION AND/OR EXPERIENCE • Bachelor’s degree or higher in Mechanical or Aerospace Engineering or a related field, • 2+ years of experience in a similar or related role SUMMARY OF POSITION The Test Engineer is responsible for developing and executing tests to ensure that product quality and reliability meet customer requirements. This role involves collaborating with cross-functional teams to identify testing needs, create test procedures, and analyze results. The Test Engineer will also engage in troubleshooting and problem-solving to ensure product performance. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Prepare and review acceptance and qualification test procedures and corresponding reports for complex aerospace hardware, • Oversee and execute hardware testing, • Analyze test results and ensure compliance with customer requirements, • Install and troubleshoot testing equipment, • Travel as needed to test labs to support testing, • Improve data acquisition system software and hardware, • Assist in the maintenance of test lab equipment, • Maintain database of instrumentation used in the test department, • Research new instrumentation and testing methodologies, • Review calibration of test instruments to verify compliance with quality assurance and customer requirements, • Support disposition of technical issues which occur during manufacturing, • Support customer reviews and inbound requests QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Strong understanding of testing methodologies and best practices, • Expertise in instrumentation and data acquisition, • Knowledge of analog and digital test equipment, • Knowledge of data acquisition software such as LabVIEW, • Knowledge of data processing techniques, Excel preferred, • Knowledge of relevant MIL-STD’s, • Familiarity with 3D modeling and CAD software, • Familiarity with heat and mass transfer, fluid mechanics, thermodynamics, and structural mechanics, • Highly motivated self-starter, • Strong problem-solving skills, • Excellent attention to detail, • Strong verbal and written communication skills, • Capable of thriving in a fast-paced environment PHYSICAL DEMANDS • Ability to work for prolonged periods on a computer or in a lab environment, • Ability to move equipment up to 25 pounds OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $80,000 to $120,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job Description Position: Systems Administrator & Support Specialist (National Law Firm) Location: Garden City, NY Comp Package: Salary up to 100k, Full Benefits, Bonus Eligibility, Tuition Reimbursement, 401K+, etc. Summary for Systems Administrator & Support Specialist: A nationally recognized U.S.-based law firm is seeking a Systems Administrator to support and secure the firm’s technology environment. This role combines hands-on systems administration with front-line helpdesk support for attorneys, paralegals, and staff in a fast-paced, deadline-driven legal setting. The ideal candidate will ensure system reliability, security, and responsiveness while delivering high-level, client-focused technical support. This is an excellent opportunity to join a collaborative firm that values growth, initiative, and long-term career development. Responsibilities for Systems Administrator & Support Specialist: • Administer and support core law firm systems, including document management, time and billing, and related legal applications, • Maintain and troubleshoot Windows servers, user workstations, printers, and network devices to ensure continuous availability, • Provide Tier 1–2 helpdesk support to attorneys and staff via in-person, phone, and remote channels, • Manage user accounts, security groups, and permissions within Active Directory and Microsoft 365, • Assist with onboarding and offboarding of legal staff, including hardware setup, account provisioning, access controls, and user training, • Deploy software updates, patches, and system enhancements in coordination with firm leadership, • Maintain IT documentation, asset inventories, and license tracking while supporting disaster recovery initiatives Requirements for Systems Administrator & Support Specialist: • Associate’s or Bachelor’s degree in Information Technology, Computer Science, or equivalent hands-on experience, • 2–4 years of experience in systems administration and/or IT helpdesk support, preferably within a law firm or professional services environment, • Strong knowledge of Windows Server, Microsoft 365, Active Directory, and core networking concepts including DNS, DHCP, VPNs, and firewalls, • Proven ability to deliver high-quality technical support to demanding users in a deadline-driven environment, • Excellent communication, customer service, and technical documentation skills NMpF6l7KT6

Job Description We are looking to hire a Commercial Door Mechanic to join our team! Your main responsibilities will be Door & Hardware Installation & Repairs in a hospital setting throughout the 5 Boroughs & Parts of Long Island. Role and Responsibilities • Installation of hollow metal Doors, Frames, and hardware in steel stud and concrete openings., • Installation and repair of Door hardware including Closers, Panic Bars, various locksets, Door Coordinators, Continuous hinges, Kick plates, Flushbolts, Vision panels, • MUST show up on time & follow safeguards, rules, and regulations per the jobsite foreman/manager, • Installation & Repairs of metal framing and sheetrock to facilitate door frame installation/repair., • Misc. maintenance work including minor masonry repairs, fire stopping, cleaning, etc., as needed., • Maintaining jobsite inventory of supplies, site tools and equipment., • Provide accurate and complete documentation of prior conditions and work performed for customer reporting using phone/tablet., • Maintain professional and timely communication with customers and AFG management., • Reviewing and implementing work orders and assignments, • Minimum 10 years experience in Door Installation & Repairs, commercial carpentry., • Good verbal and written communication skills., • Must be self-motivated and possess the ability to perform work throughout a facility self-directed which includes communication with customers and staff., • Maintain a professional appearance which includes consistent on-time arrival at job sites., • Administer proper infectious control measures as per hospital requirements when performing inspections., • Demonstrate ability to read, follow, and label Life Safety Plans/Drawings., • Capable of aligning work schedule with the on-site need for tools and materials, which includes unloading and loading of these materials and tools, and any other necessary equipment., • Knowledge of computer software a plus (Microsoft Word & Excel, Email, and Adobe Acrobat), • Efficient with smartphones, tablets, computers, and chosen applications for daily reporting., • Valid driver license with an acceptable driving record., • Reliable Vehicle to get to various jobsites. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • 8:00am – 4:00pm regular work hours at jobsites throughout NYC & Long Island, • The employee is regularly required to stand; walk; sit; use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; climb stairs & ladders; balance; stoop, kneel, crouch or crawl; talk and hear., • Associate is required to spend 20% or more of time climbing and using various ladders., • Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus., • Must be able to lift and/or move up to 60 pounds independently., • Working extended hours which includes evenings and weekends (compensation provided)., • Paid Holidays & Paid Time Off (vacation, sick, personal), • 401k with Employer Matching up to 5%Company DescriptionWe specialize in Operation, Inspections, Repairs, and Renovations of Healthcare Facilities in the NYC area.We specialize in Operation, Inspections, Repairs, and Renovations of Healthcare Facilities in the NYC area.

Job Description The IoTMS Technician III is responsible for the configuration and troubleshooting of technology devices and onboarding of new products and offerings. This role involves programming devices to ensure optimal performance, conducting tests to verify functionality, and kitting and packing devices for shipment. The technician collaborates with stakeholders such as the engineering and quality teams to enhance device configuration efficiency and accuracy while maintaining thorough documentation of adherence to all processes. ESSENTIAL FUNCTIONS Financial • Ensure cost-effective testing, configuration, imaging, kitting, packing processes for shipment of customer orders., • Optimize refurbishing and/or repair of wireless devices, using inventory and time efficiently. Customer • Configure wireless communication devices and other related hardware quickly and accurately., • Ensure optimal performance by adjusting settings and performing necessary calibrations., • Complete accurate shipment of orders for delivery on time. Business Process • Streamline device return, configuration, and order preparation processes., • Follow documented procedures for device testing, repair, refurbishing, imaging and configuration., • Collaborate with team members and stakeholders to share best practices and troubleshoot complex issues., • Provide Technical process support and training to Production personnel, • Maintain knowledge on OEM specific HW, Connectivity, and applicable Platforms, • Conduct Production Feasibility Assessment., • Provide time studies pertaining to Production processes., • Support process improvement initiatives and activities., • Provide engineering support to determine root cause and implement corrective actions on internal and customer related manufacturing problems. • Troubleshoot technical/process issues. Learning and Development • Engage in continuous personal development by seeking feedback and participating in training opportunities., • Mentor junior technicians and contribute to team knowledge-sharing and training sessions to improve collective skills and foster a culture of continuous learning and improvement. QUALIFICATIONS • High School Diploma, GED, or equivalent., • 3+ years’ experience in a technical and/or manufacturing role preferred., • Experience writing, testing, or debugging software., • Experience with electrical, mechanical, and computer hardware., • Experience working in an ISO (9001 & 13485) environment., • Ability to read and analyze information and data and perform basic math., • Proficient using Microsoft Office applications., • Experience providing technical customer service, such as tech support and/or installation/repair service preferred. SKILLS/COMPETENCIES • Strong communication skills, both verbal and written, with a customer-centric approach., • Proficiency in problem-solving and critical thinking., • Ability to work independently and as part of a team., • Ability to multi-task and contribute Kore Values Customer Obsession We earn trust through deep understanding and relentless commitment. We earn the trust of our customers and aim to delight them through our solutions – we want to be loved by our customers. Be the Spark We lead with energy, creativity, and urgency. We don't wait for change – we ignite it. We listen, engage, and encourage others to participate. Own the Outcome We take accountability seriously – delivering on our promises to customers, teammates, and ourselves. We finish what we start. We think like owners and we’re frugal where it makes sense. Grit & Positivity We face challenges head-on – with resilience, optimism, and determination. We look at these situations as an opportunity to create a positive outcome. When we make a commitment, we deliver. We challenge those in a respectful way that do not meet their commitments. Challenge. Debate. But Be Human. We speak up, question assumptions, and challenge ideas – not people. We aim for the best outcomes through respectful, direct, and open dialogue, keeping in mind we’re all on the same team. Working Conditions The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally required to remain stationary; move; lift and/or move up to 15 pounds. The employee must regularly sit; use hands to finger, handle, or feel; reach with hands and arms; communicate. Specific vision abilities required by this job include close vision. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. “KORE Wireless Group, Inc. is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of any kind. KORE is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at KORE are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, sex (including pregnancy), age physical, mental or sensory disability, HIV Status, sexual orientation, gender identify and/or expression, marital, civil union or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. KORE will not tolerate discrimination or harassment based on any of these characteristics.”

Job Description Candidates must live in the NYC area Summary: Parabit Systems, a well-established and rapidly expanding company in the security and self-service equipment industries, is currently seeking an experienced Firmware Engineer. The role requires the successful candidate to work onsite at Parabit's facility for the first sixty (60) days. Following this initial onsite period, the position may transition to a remote role, subject to performance and business needs. Candidates may reside outside the NYC area; however, any lodging or travel expenses associated with the initial onsite period shall be the responsibility of the candidate. Parabit Systems, a well-established and rapidly expanding company in the security and self-service equipment industries, is currently seeking an experienced Firmware Engineer to participate in all aspects of the design and maintenance of hardware and firmware for its products. Candidate needs to demonstrate the ability to use appropriate development tools, compilers, and simulation. Must be capable of working within a team environment to plan, organize, execute and thoroughly document complex system designs. Test and debug skills are necessary; must understand interoperability of hardware and software. Must be able to manage and support multiple tasks on a consistent basis, while providing the highest level of service. Good verbal and writing skills are necessary. Full life-cycle software development; programming to include conceptual design, general coding, release to manufacturing testing, and quality assurance. Candidate needs to be able to produce final release software for manufacturing including associated documentation. Job Requirements: • A qualified candidate must have a BS or higher with 10+ years of relevant applied experience in Computer Science or Electrical Engineering. The ideal candidate will have a clear understanding of and hands-on experience with microprocessor firmware development., • Experience with Microcontroller competencies: Microchip, Nordic ARM cortex., • Experience with writing bootloaders for microprocessors on new and existing PCBAs., • Experience with writing embedded firmware in C for a Real-Time Operating System (RTOS)., • Experience with Bluetooth/NFC implementation., • Experience with network communication protocols (TCP/IP, UDP), • Experience with common communication protocols (I2C, SPI, RS485/RS232 and USB), • Experience with Microchip's Tools - MPLAB / MPLAB X / Harmony, • Experience developing embedded / IoT device software / firmware., • Knowledge and experience with analog, digital and embedded systems design, development, test engineering, and manufacturing., • Ability to read hardware block diagrams, schematics, and wiring diagrams., • Must be capable of thoroughly documenting complex system designs. Benefits: • Medical, • Dental, • Vision, • 401K, • Group Life All employment candidates must pass: a NON-DOT Drug screening, Criminal and Credit Background Check and a Driver License Check prior to employment.

Job Description Summary: Parabit Systems, Inc., a leading innovator in security and self-service solutions, is seeking an experienced and highly skilled Firmware Engineer - Embedded Systems Designer to participate in all phases of firmware and embedded systems design, development, integration, and maintenance for our product lines. The ideal candidate will have deep expertise in embedded systems architecture, microcontroller programming, and hardware-software interoperability, with the ability to work collaboratively across engineering disciplines to deliver reliable, high-performance solutions. This role demands strong problem-solving skills, meticulous attention to detail, and a commitment to secure, scalable, and maintainable designs. You will be involved in the complete product lifecycle, from conceptual design and prototyping to release-to-manufacturing, field deployment, and product support. Candidates should possess excellent verbal and written communication skills, the ability to manage multiple projects simultaneously, and a strong focus on meeting deadlines without compromising quality. Primary Responsibilities: • Design, develop, and maintain firmware for access control, monitoring, and self-service equipment, ensuring seamless integration with enterprise-level management software and cloud-based platforms., • Contribute to system architecture, hardware interface design, and embedded application development., • Implement secure coding practices and ensure compliance with relevant cybersecurity and industry standards (e.g., NIST, FIPS, ISO)., • Develop and maintain communication protocols for embedded systems, including TCP/IP, UDP, SPI, I²C, UART, RS-232/485, USB, and Bluetooth., • Perform system-level testing, validation, and debugging using development tools, emulators, and simulation environments., • Create and maintain comprehensive technical documentation, including design specifications, test procedures, and release notes., • Enhance existing products with new features, security updates, and performance optimizations., • Collaborate with hardware engineers, software developers, QA engineers, and field teams to ensure product reliability and successful deployment., • Provide customer-facing technical support both remotely and on-site as needed., • Coordinate internal build activities, ensuring smooth workflow across engineering projects. Job Requirements: • Bachelor's degree in Computer Engineering, Electrical Engineering, or related field., • Minimum 10 years of experience in embedded systems design and development., • Proficiency with Microchip PIC family hardware, MPLAB IDE/IPE, and compilers; experience with other MCU platforms and RTOS environments is a plus., • Strong programming skills in C for embedded systems; experience with C#, VB, and .NET for tools and UI development preferred., • SQL database experience for configuration, logging, or device management integration is desirable., • Advanced understanding of network communication protocols (TCP/IP, UDP) and embedded communication standards (SPI, I²C, UART, RS-XXX, USB, Bluetooth, etc.)., • Expertise in state machine design and implementation., • Experience integrating embedded systems with cloud services, IoT frameworks, or remote management platforms preferred., • Demonstrated ability to document, test, and validate complex designs to ensure performance, security, and maintainability., • Strong multitasking capabilities with a proven record of delivering projects on time. Why Join Parabit: Parabit Systems is focused on growth, innovation, and developing leaders. We provide a collaborative and challenging environment where engineers work on advanced technology that impacts industries worldwide. As an equal opportunity employer, we value diversity and encourage all qualified individuals to apply. To Apply: Please email your resume to . All employment candidates must pass: a NON-DOT Drug screening, Criminal and Credit Background Check and a Driver License Check prior to employment.

I hold a Bachelor’s degree in Computer Science, Engineering, or a related technical field (or possess equivalent experience).

Customer Service / Fully Remote] - Anywhere in U.Competitive pay / $500 retention bonus / Medical, dental, and vision / 401K / PTO / Equipment provided / Paid training - As a Call Center Support Rep you'll: Receive a large volume of inbound phone calls; Assist with outbound call campaigns; Answer ge

As a FT Call Center/Customer Service Rep [Work From Home], you will: Handle incoming calls and inquiries from customers in a professional and courteous manner; Provide accurate and efficient assistance with customer inquiries, complaints, and requests; Maintain a high level of product knowledge to e

Customer Service / Remote] - Anywhere in U.DOE / Health-Dental-Vision-Life-FSA-HSA / 401(k) plan - As a Call Center Representative, you will: Assist customers with inquiries and concerns through multiple communication channels including phone, email, and chat; Provide exceptional customer service by

Compass Group - - Responsibilities: Install, maintain, and repair coffee and water equipment; Diagnose and troubleshoot equipment malfunctions; Advise customers on preventive maintenance and configurations which may impact product performance; Ensure all repairs and maintenance meet quality standar

Customer Service / Remote] - Anywhere in U.Flex Schedule 7a-11p EST / Medical-Dental-Vision-Life-AD&D / 401(k) +3% / Generous PTO + Parental Leave - As a FT - Call Center Representative - Work From Home at Lap Of Love, you will: Assist clients with their end-of-life care needs by answering phone cal

Call Center / Remote] - Anywhere in U.Competitive pay / Medical, dental & vision / 401k / PTO - As a Customer Service Rep at Planet Home Lending, you will: Respond to borrower inbound calls concerning their account, ensuring high quality service and adhering to productivity and regulatory requiremen

Customer Service / Remote] - Anywhere in U.Competitive Pay & Benefits / Flexible Schedule / Career Growth / Meaningful Impact - As a Call Center Representative (CSR) at Wellcove, you will: Provide excellent customer service via phone and email; Respond to customer inquiries and resolve issues in a t

Customer Service / Remote] - Anywhere in U.Competitive pay & benefits - As a Call Center Rep at Jackson Hewitt Inc.Receive inbound/ make outbound calls to clients to learn about and address their needs, complaints, or other issues with products or services; Respond efficiently and accurately to clie

Customer Service / Remote] - Anywhere in U.Medical, dental & vision / 401k / PTO / Equipment provided - As a Call Center Associate at Vector Security, you will: Receive inbound communications from customers via multiple channels including phone, chat, email and text and provide positive customer exp

Hvac Controls - Field Service Technician.Honeywell International is seeking an experienced and motivated HVAC Controls - Field Service Technician to join our Building Automation team in New York City, Queens, The Bronx and Brooklyn, NY.This is a Union position (Local 3) supporting the design, instal

Staff Software Engineer Remote Job Duties: • Implement and evolve a Data Lake storage system with low latency and high throughput for bulk data ingestion and query • Implement metadata, data governance, security, and acce

Bachelor's degree in Computer Science, Engineering, or a related technical field (or equivalent experience).

We’re looking for a Amazon IT Support Technician to diagnose and resolve hardware, software, and network issues for employees.

Bachelor's degree in computer science or equivalent.

BS degree in Computer Science from a reputed university.