Engineering jobs in Rockville Centre, New YorkCreate job alerts

Senior Associate Dean/Vice Dean, DeMatteis School of Engineering and Applied Science. DeMatteis School of Engineering and Applied Science - Office of the Dean. Reporting to the Dean of the DeMatteis School of Engineering and Applied Science, the Senior Associate Dean/Vice Dean plays a crucial role i

Description Leidos is seeking an Electronics Engineer to join the National Airspace System Integration Support Contract (NISC IV) team. This role is located in Jamaica NY area. Includes up to 25% travel. In this role you will support the Federal Aviation Administration's (FAA) Eastern Service Area (ESA) performing electronics design engineering, cost estimating, scheduling, coordinating, inspecting, and acceptance and reporting project progress and issues against project goals, scope of work, and schedule. The projects support air traffic control facilities over the geographic scope of the ESA. Electronics Engineer Primary Responsibilities * Plan and design a variety of facility establishment, replacement and modernization projects (e.g. data networking, air/ground communications, fiber optic data transmission, communications control, inter-facility wiring) * Perform on-site surveys to develop designs and detailed reports * Prepare unit installation and system integration design plans * Conduct and analyze studies of existing facilities * Utilize relevant software tools to assist in analysis and design * Generate sketches showing relation of proposed work in existing or new facilities with specifications and dimensions * Plan, schedule, and coordinate installation project activities to meet milestones and deadlines working directly with stakeholders and contractors * Confer with multi-disciplinary engineering staff and other personnel to identify and resolve problems with the design or implementation * Perform project management related tasks and communication (including safety plans, sequence of work, cutover plans, risk management plans, lead and asbestos work permits) * Participate in on-site coordination meetings, inspections, cutovers, testing and restoration of facilities * Provide periodic updates of project to team, management, and stakeholders * Provide timely responses for requests for information and project related submittals * Provide monthly and semi-annual work status reports * Track and reconcile closure of project punchlist exceptions * Manage multiple projects towards successful on-time completion * Perform internal design reviews of other projects Electronics Engineer Basic Qualifications * Bachelor of Science degree in Electrical Engineering from a four year ABET accredited college or university and 4+ years of relevant experience in commercial, industrial or government facility establishment, replacement and modernization design engineering OR a Masters and 2+ years of relevant experience * Current and relevant knowledge of building and other codes in order to perform system power and data distribution design, grounding and surge protection, and address equipment location and physical installation * Ability to manage multiple projects, tasks and deadlines through to completion * Ability to conduct efficient, organized data gathering and data analysis * Ability to accomplish clear and concise general and technical writing and tactfully coordinate with a variety of project stakeholders, peers and management levels * Working knowledge of Microsoft Office products, engineering scheduling tools and applications, and be able to use the internet as an information gathering and communicating tool * Ability to effectively communicate verbally and in writing * Proficiency using AutoCAD / Microstation to create and edit engineering drawings * Ability to obtain a Public Trust Suitability. To be eligible for Public Trust you must be a US Citizen or a Green Card holder who has resided in the US for the past 3 years.) Electronics Engineer Preferred Qualifications * Proficiency in engineering analysis and design software tools At Leidos, we don’t want someone who "fits the mold"—we want someone who melts it down and builds something better. This is a role for the restless, the over-caffeinated, the ones who ask, “what’s next?” before the dust settles on “what’s now.” If you’re already scheming step 20 while everyone else is still debating step 2… good. You’ll fit right in. September 12, 2025 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $85,150.00 - $153,925.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Play the role of front end web developer to create web apps in ReactJS, NextJs and VueJS and eventually transition as a Fullstack Engineer.

We are looking for a Mechanical Engineer for our Westbury, NY facility. In this role you will be reporting to the Engineering Manager and working closely with Production, Quality Assurance, Production Planning, Document control, Change Engineering, and Purchasing. The Mechanical Engineer is responsible for handling aspects of operations engineering & equipment/process troubleshooting. This position will also lead all CAPEX projects for the materials team & provide project engineering support as needed for design, selection, and procurement of new equipment (or upgrading existing equipment). \n \n Your Responsibilities: \n \n Maintenance Support: \n\n • Developing PM plans & schedules\n, • Review and maintain asset list and ensure all equipment is in good working condition and provide recommendations for replacement and / or upgrade strategy\n, • Develop maintenance training plans (Equipment maintenance plans and personnel training)\n, • Perform failure analysis for equipment failures and facilitate root cause investigations and corrective actions\n\n \n Process Engineering Support: \n\n • Create, update, and maintain P&ID’s\n, • Analyze engineering sketches, specifications and related data and drawings to determine design factors\n, • Review and provide recommendations to modify design to correct operating deficiencies and/or reduce production issues.\n, • Ability to read and interpret engineering, electrical drawings, and control systems\n, • Create and maintain operating procedures for equipment\n\n \n Projects: \n\n • Ability to create Layout and Engineering Drawings in AutoCAD\n, • Lead and/or assist with facilities and equipment related projects\n, • Identify, select design, and provide recommendations for sourcing new equipment\n, • Examine, prepare and verify technical drawings and specifications, to ensure that installation and operations of new / existing equipment conforms to standards\n, • Prepare, communicate, and maintain schedules, reports, and documents based on sound project management principles\n\n \n Your Profile: \n\n • Bachelor’s degree in mechanical engineering or closely related field.\n, • Experience in handling CAPEX related projects of >$1M valuation.\n, • PMP certification preferred.\n, • At least 5 years of related experience, preferably in a manufacturing setting.\n, • Automation experience highly preferred.\n, • Experience in Six sigma & statistical process control strongly desired\n, • Demonstrated experience in process evaluation and improvement, troubleshooting and problem solving.\n, • Strong communication and interpersonal skills and ability to deal effectively with a variety of personnel including administration, engineering, scientific, and manufacturing staff.\n, • Understanding of industry recognized best practices for engineering processes.\n, • Ability to work in a fast-paced and rapidly changing environment and maintain a positive outlook.\n, • Proficiency in use of AutoCAD 3D is preferred (Minimum required proficiency in AutoCAD 2D)\n, • Working knowledge of various software including: MS Office, Project, Visio, and SAP.\n\n \n We offer: \n \n Aside from a dynamic global culture and leading market position, we are proud to offer our employees development opportunities, competitive salary and a robust benefit program ALL available on first day of employment! \n \n The perks and benefits of working at Oerlikon include the following: \n \n\n • Comprehensive medical and prescription drug plan with low premiums, company sponsored HSA contributions and without cumbersome waiting periods to keep you going strong. \n, • Excellent Dental and Vision coverage.\n, • Employee Assistance, Financial and Wellness programs to help improve all aspects of your life journey. \n, • 401(k) retirement savings plan with significant company match and financial planning and education options to help you achieve your retirement goals \n, • Tuition reimbursement and internal education resources to satisfy your love of learning so you can continue to grow with us!\n, • Generous paid time off to support your physical and mental wellbeing.\n, • 12 paid company holidays to occasionally extend your weekends or time off. \n, • 100% company paid life insurance and disability insurance\n, • Employee Referral Bonus program because why not to bring your friends to work everyday!\n

Akkodis is seeking a Contract-to-Hire Manufacturing Process Engineer for a Contract-to-Direct Hire position in Garden City, NY. This position is Direct Hire and fully onsite, offering growth and a generous benefit package. • Hourly Rate: $55.00 - $60/hour The rate may be negotiable based on experience, education, geographic location, and other factors., • Type: Contract-to-HIre, • Location: Garden City, NY, • Duration: 6 months to Direct Hire Job Specific Duties: • Initial management of efforts to transfer Tooling, Parts and Products to new facility., • Apply continuous improvement methods such as lean manufacturing to enhance manufacturing quality, reliability, or cost-effectiveness, including determining root causes of failures using statistical methods and recommend changes in designs, tolerances, or processing methods., • Design, install, and troubleshoot manufacturing equipment., • Identify opportunities and implement changes to improve products or reduce costs using knowledge of fabrication processes, tooling and production equipment, assembly methods, quality control standards, or product design, materials and parts., • Design testing methods and test finished products or process capabilities to establish standards or validate process requirements., • Design layout of equipment or workspaces to achieve maximum efficiency., • Review product designs for manufacturability or completeness; including purchasing equipment, materials, or parts and preparing documentation for new manufacturing processes or engineering procedures., • Evaluate manufactured products according to specifications and quality standards, including troubleshooting new or existing product problems involving designs, materials, or processes, • Develop sustainable manufacturing technologies and analyze the financial impacts of sustainable manufacturing, • Provide technical expertise or support related to manufacturing., • Develop, document and implement standard work instructions for critical manufacturing operations. Requirements/Qualifications: • Bachelors degree in Industrial Engineering, Manufacturing Engineering or other relevant degree., • Due to contracts with the United States Government, the candidate must be either a US Citizen or Green card., • 3 or more years of progressive experience in manufacturing engineering., • Experience in metal fabrication, welding and/or brazing of pressure containing products., • Experience in a highly regulated industry, such as, Military, Aerospace, Nuclear or Automotive or other similar., • Excellent people and communication skills are required (both oral and written)., • Strong interpersonal skills requiring the ability to resolve conflicting interests and obtain cooperation, • Computer literacy in a MRP system (Oracle a plus), Microsoft Office., • Able to work under pressure, • Highly technical and analytical skills such (drawings, schematics, layout), • Able to think out of box., • Project management skills, • Highly organized and efficient, • Possess leadership and interpersonal skills, • Strong problem-solving skills, • Due to ITAR Restrictions, an export license may be required. If you are interested in this role, then please click APPLY NOW. For other opportunities available at Akkodis, or any questions, feel free to contact me at . We are open to working with professionals who are authorized to work in the US without sponsorship. No C2C Equal Opportunity Employer/Veterans/Disabled Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, an EAP program, commuter benefits, and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Disclaimer: These benefit offerings do not apply to client-recruited jobs and jobs that are direct hires to a client. To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit . The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: · The California Fair Chance Act · Los Angeles City Fair Chance Ordinance · Los Angeles County Fair Chance Ordinance for Employers · San Francisco Fair Chance Ordinance

Job Description Interested in the opportunity for a great career as a utility locator. Join T2 Utility Engineers (T2ue) in the Oceanside, New York as part of our Subsurface Utility Engineering (SUE) field tech team. Our SUE field techs gain on-the-job training in utility locating and utility designating, along with knowledge and experience in Subsurface Utility Engineering and surveying methods and technology. When you join our field tech team, you’re not confined to an office. T2ue provides you with outstanding benefits and an opportunity for a great career with room for advancement. Are you self-motivated and interested in learning? We’re looking for people interested in advancing and building a career with the leader in the utility locating industry. You don’t need experience in our industry to join our team. We’ll provide training, you provide the initiative to build a career with us. Since 1993, T2 Utility Engineers has provided professional Subsurface Utility Engineering and surveying services in support of infrastructure projects of all sizes and types. Using advanced technologies, our team of field technicians, engineers, and surveyors, provide quality data and professional insight to help our clients visualize, plan, and design their projects. Our mission is to provide project stakeholders with quality information, professional insight and deliverables that streamline construction, improve project safety and set the standard for the engineering industry. SUE Technician II responsibilities include, but are not limited to: • Be skilled in the operation of SUE utility locating and designating equipment, including pipe and cable locators, Ground Penetrating Radar (GPR), and non-destructive vacuum excavation, • Complete detailed accurate daily reports, forms and field sketches, both electronically as well as draft by hand, • Use of tools and equipment to conduct utility investigations, including jackhammer, pogo-tamper, concrete saw, compressor blower, vacuum hose, air lance, and hand tools, • Drive commercial motor vehicles, however a CDL license is not required, • Perform safety set-up and maintenance of traffic operations under direct supervision of senior field staff, • Assist with survey and data collection tasks, supporting overall crew activities, • Perform daily routine maintenance of equipment, • Perform daily basic vehicle maintenance Tech II Qualifications: • High School Diploma/GED, • 4+ years of experience in the utility locating industry or as a SUE Field Tech, • Ability to read and interpret utility company prints and design plans, • Valid driver's license with good driving record, • Ability to pass a pre-employment physical (U.S. only), • Ability to obtain a DOT medical card for CMV operation (U.S. only), • Ability to obtain a Secure Workers Access Card (SWAC), • Ability to lift 50 lbs. and perform physical movements necessary to operate heavy tools and equipment, • Ability to work outdoors in all climates, • Willingness to travel up to 50% of the time, by company vehicle or commercial airline, up to 2 week continuous stay., • Must have a good oral and written communication skills and attention to detail, • OSHA Safety certifications are a plus, • Please Note: Candidates will be required to pass a drug, background and reference screening (U.S. only) T2 Utility Engineers is an equal opportunity employer. We are committed to an inclusive, equitable and accessible workplace. Qualified applicants will receive consideration for employment without regard to race, colour, citizenship, creed, sex, sexual orientation, gender identity, gender expression, age, marital status, family status or disability. If you require an accommodation at any time during the recruitment or application process, please contact Human Resources. T2 Utility Engineers does not accept unsolicited resumes from any 3rd party agencies. No fee will be paid to 3rd parties who submit unsolicited resumes to any T2 Utility Engineer employee. Resumes from approved vendors must be specifically requested by T2 Utility Engineers and approved by the T2 Utility Engineers Talent Acquisition Team. We Offer a Complete Benefits Package! In addition to the opportunity to grow and advance, we offer competitive salaries, paid training, and comprehensive benefits with options to meet your needs, including; • Paid time off, • Paid overtime, • Paid holidays, • Company provided cell phone or cell phone allowance, • Boot and clothing allowance, • Generous daily food and incidentals allowance when overnight travel is required, • Medical and prescription drug coverage – multiple plan options, • Flexible Spending (FSA), Dependent Care (DCA), or Health Savings (HSA) accounts, • Dental, • Vision, • Wellness and Employee Assistance Programs, • Parental, Family and Medical leave, • 401-K retirement plan w/company match, • Life insurance, • Short / long term disability, • Tuition reimbursement, • Spot and annual bonus incentives, • Employee discounts and perks

Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. Perform a wide range of civil engineering analysis and design tasks related to: zoning analysis, site planning,

Job Description Interested in the opportunity for a great career as a utility locator, with no experience or advanced degree required? Join T2 Utility Engineers (T2ue) in Oceanside, NY as part of our Subsurface Utility Engineering (SUE) field tech team. Our entry-level SUE field techs gain on-the-job training in utility locating and utility designating, along with knowledge and experience in Subsurface Utility Engineering and surveying methods and technology. When you join our field tech team, you’re not confined to an office. T2ue provides you with outstanding benefits and an opportunity for a great career with room for advancement. Are you self-motivated and interested in learning? We’re looking for people interested in advancing and building a career with the leader in the utility locating industry. You don’t need experience in our industry to join our team. We’ll provide training, you provide the initiative to build a career with us. Since 1993, T2 Utility Engineers has provided professional Subsurface Utility Engineering, UC, and surveying services in support of infrastructure projects of all sizes and types. Using advanced technologies, our team of field technicians, engineers, and surveyors, provide quality data and professional insight to help our clients visualize, plan, and design their projects. Our mission is to provide project stakeholders with quality information, professional insight and deliverables that streamline construction, improve project safety and set the standard for the engineering industry. SUE Technician I responsibilities include, but are not limited to: • Learn the operation of SUE utility locating and designating equipment, including pipe and cable locators and non-destructive vacuum excavation, • Use of tools and equipment to conduct utility investigations, including jackhammer, pogo-tamper, concrete saw, compressor blower, vacuum hose, air lance, and hand tools, • Drive commercial motor vehicles, however a CDL license is not required, • Complete daily logs of work performed, which includes simple mathematics, • Perform daily basic vehicle maintenance, • Perform safety set-up and maintenance of traffic operations under direct supervision of senior field staff, • Assist with survey and data collection tasks, supporting overall crew activities, • Perform daily routine maintenance of equipment Tech I Qualifications: • High School Diploma/GED, • Valid driver's license with good driving record, • Ability to pass a pre-employment physical (U.S. only), • Ability to obtain a DOT medical card for CMV operation (U.S. only), • Ability to lift 50 lbs. and perform physical movements necessary to operate heavy tools and equipment, • Ability to work outdoors in all climates, • Willingness to travel up to 50% of the time, by company vehicle or commercial airline, up to 2 week continuous stay., • Must have a good oral communication skills and attention to detail, • OSHA Safety certifications are a plus, • Prior utility related experience is a plus, • Basic understanding of Highway/Utility plans is a plus, but not required We Offer a Complete Benefits Package! In addition to the opportunity to grow and advance, we offer competitive salaries, paid training, and comprehensive benefits with options to meet your needs, including; • Paid time off, • Paid overtime, • Paid holidays, • Company provided cell phone or cell phone allowance, • Boot and clothing allowance, • Generous daily food and incidentals allowance when overnight travel is required, • Medical and prescription drug coverage – multiple plan options, • Flexible Spending (FSA), Dependent Care (DCA), or Health Savings (HSA) accounts, • Dental, • Vision, • Wellness and Employee Assistance Programs, • Parental, Family and Medical leave, • 401-K retirement plan w/company match, • Life insurance, • Short / long term disability, • Tuition reimbursement, • Spot and annual bonus incentives, • Employee discounts and perks, • Please Note that selected candidates will be required to pass a drug, background, and reference screening. T2 Utility Engineers is an equal opportunity employer. We are committed to an inclusive, equitable and accessible workplace. Qualified applicants will receive consideration for employment without regard to race, color, citizenship, creed, sex, sexual orientation, gender identity, gender expression, age, marital status, family status or disability. If you require an accommodation at any time during the recruitment or application process, please contact Human Resources. T2 Utility Engineers does not accept unsolicited resumes from any 3rd party agencies. No fee will be paid to 3rd parties who submit unsolicited resumes to any T2 Utility Engineers employee. Resumes from approved vendors must be specifically requested by T2 Utility Engineers and approved by the T2 Utility Engineers Talent Acquisition Team.

Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. Perform a wide range of civil engineering analysis and design tasks related to: roadway and grading design, sit

Stay accessible to Front Desk and Chief Engineer.

Job DescriptionDescription: Job Description: Responsible for the daily operation, maintenance, preventative maintenance and repairs of building plumbing, electrical, HVAC and all other building systems. Must have working knowledge of all building mechanical, electrical, HVAC, plumbing, life safety, and fire protection systems to ensure proper operations and be able to act upon any conditions that are out of the ordinary. Salary: $83,200.00/yr Availability: On Call 24/7 Essential Job Duties Under the Direction of the Director of Engineering and Operations: 1. Inspect building, grounds and equipment for unsafe or malfunctioning conditions., 2. Conduct, schedule and manage periodic general preventative maintenance on the mechanical, electrical, HVAC, and plumbing systems. This involves normal lubrication, adjustment, cleaning, replacement of consumable parts (such as filters, belts, indicator lights, etc.), and periodic testing of the equipment. These systems include, but are not limited to air handling units, re-circulating air systems, water pumping systems, cooling plant and its associated mechanics and all plumbing system components., 3. Assist with installation and modification of building equipment systems., 4. Respond quickly to emergency situations., 5. Perform and/or oversee electrical and plumbing repair and troubleshooting., 6. Perform and/or oversee mechanical projects., 7. Perform all assigned work to ensure the safety of the building's tenants and the continuous operation of the site., 8. Prioritize service calls and follow-up upon completion., 9. Troubleshoot, evaluate equipment/systems and recommend upgrades., 10. Coordinate maintenance efforts with outside contractors and technicians when work cannot be performed in-house. Coordinate contractor, tenant and management approvals for work orders that require the use of an outside contractor., 11. Order parts and supplies as required and maintain stock and inventory control., 12. Work with the Director of Engineering and Building Manager in planning and controlling annual and capital budgets., 13. Be responsive to tenant complaints in the areas of safety, plumbing, mechanical, electrical and environmental needs through both personal contact and work order systems., 14. Be familiar with and conform to all written operating procedures associated with site., 15. Ensure the cleanliness and appearance of all work areas., 16. Maintain a professional appearance and manner at all times, keep calm demeanor in emergency situations and act as a team member with all staff, 17. Perform other duties as assigned. Skills, Education and Experience: · Minimum of five (5) years of experience in building operations, engineering and equipment and systems maintenance · Ability to handle multiple projects and make decisions · Knowledge and understanding of blueprints · Strong customer service, communication and computer skills inclusive of payroll reporting · High School Diploma or Equivalent Other Job Requirements: · Available and on call 24/7 · Able to lift 50 pounds · Able to climb ladders A detailed scope-of-work will be discussed during the interview process. The requirements and duties described above may be modified or waived by the Company in its sole discretion without notice. Guardian Service Industries is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to, among other things, race, religion, color, national origin, sex, age, marital status, sexual orientation, gender identity, pregnancy, citizenship, status as a protected veteran, or status as a qualified individual with disability, or any other characteristic protected by applicable law. Guardian Service Industries is committed to integrity, excellence, and diversity among its employees. Requirements:

Job DescriptionDescription: The Glen Oaks Club, a premier club in Long Island, NY, is seeking a Full Time Facilities Maintenance Engineer. The Glen Oaks Club is known for providing its members with an exceptional and personalized experience. For nearly 100 years the Glen Oaks Club has been evolving to maintain its stature as a home away from home for its member families. Summary: The Facilities Maintenance Engineer is responsible for completing all maintenance and engineering duties and repairs all furniture and equipment, lighting, plumbing, HVAC, windows, flooring, locks, painting, and other aspects of the Clubhouse, company homes, and other structures Essential Duties and Responsibilities include the following; • Conduct routine inspections of facilities, including mechanical, electrical, plumbing, and structural components., • Perform preventive maintenance tasks on equipment and systems to ensure optimal performance and longevity., • Respond promptly to maintenance requests and resolve issues in a timely manner to minimize downtime and disruption to operations., • Troubleshoot and repair malfunctioning equipment, such as HVAC systems, plumbing fixtures, electrical circuits, and building automation controls., • Conduct regular checks on building systems, such as fire alarms, security systems, and emergency lighting, to ensure compliance with safety regulations., • Maintain accurate records of maintenance activities, including work orders, equipment logs, and inventory levels., • Coordinate with external contractors and vendors for specialized repairs or installations as needed., • Assist in the planning and execution of facility improvement projects, including renovations, upgrades, and expansions., • Monitor and maintain inventory levels of supplies and spare parts necessary for maintenance tasks., • Uphold standards of cleanliness and orderliness throughout the facilities, including common areas, restrooms, and utility rooms., • Adhere to safety protocols and regulations at all times, including the proper handling of hazardous materials and compliance with OSHA guidelines., • Provide support during emergencies, such as power outages, natural disasters, or other unforeseen events, to ensure the safety and security of building occupants., • Performs other duties assigned by Facilities Maintenance Manager. Requirements: Knowledge, Skills and Abilities: • Proven experience in facilities maintenance, including knowledge of HVAC, electrical, plumbing, and mechanical systems., • Strong troubleshooting skills and the ability to diagnose and resolve problems efficiently., • Proficiency in using hand and power tools for repair and maintenance tasks., • Excellent organizational skills and attention to detail for maintaining accurate records and inventory., • Ability to work independently with minimal supervision and prioritize tasks effectively., • Effective communication skills, both verbal and written, for interacting with colleagues, tenants, and external contractors., • Flexibility to work occasional evenings, weekends, or holidays for emergencies or special projects., • Knowledge of safety protocols and regulations, including OSHA standards, and a commitment to maintaining a safe work environment., • Physical stamina and dexterity to perform tasks that may require lifting, climbing, bending, and working in confined spaces. Glen Oaks Club offers a Generous Benefits Package including the following: • Group health coverage (medical, dental, & vision), • 401(k) plan, • Company provided life insurance, • Generous paid holiday schedule and paid vacation & sick days

Job Description EnSafe accepts applications for a Utilities Environmental Engineer based out of EnSafe’s client site(s) (location flexible but travel required). EnSafe is an employee-owned, global environmental consulting and engineering firm. We strive to provide innovative, creative solutions for our clients. EnSafe specializes in Environmental Management and Planning, Civil Design Engineering, Environmental Restoration, Natural & Water Resources, Health & Safety, and Technology, with offices operating within the U.S. What We Are Looking For: As a Utilities Environmental Engineer, you will provide multimedia environmental compliance support to utility-sector clients (electric distribution and/or generation). This role is designed for an early- to mid-career professional with at least 5 years of direct compliance experience who is ready to step into a client-facing “doer” role. You will work directly with utility partners to address regulatory requirements, solve technical problems, and implement compliance programs in fast-paced operational environments. What You Will Be Doing: • Supporting multimedia environmental compliance programs (water, waste, hazardous materials)., • Managing PCB compliance programs and advising clients on regulatory obligations., • Developing and implementing environmental management systems for utility operations., • Preparing reports, permits, and regulatory filings in accordance with state and federal requirements., • Conducting audits, inspections, and assessments to ensure ongoing compliance., • Providing guidance and authoring waste characterization, stormwater management, SPCC, and related reports/documents., • Partnering with client leadership to recommend and implement process improvements., • Bachelor’s degree in Environmental Engineering, Chemical Engineering, or related field., • Minimum of 3–4 years post-graduation experience; 5+ years preferred in multimedia environmental compliance., • Demonstrated knowledge of utility-sector environmental regulations (water, waste, PCB management)., • Strong technical writing skills with ability to prepare compliance reports and programs., • Ability to manage multiple projects with high diligence., • Experience working directly with utilities (distribution or generation) on compliance issues., • Familiarity with PCB management in utility operations., • Professional Engineer (PE) or Engineer-in-Training (EIT) credential., • Experience supporting multimedia compliance in consulting environments. EnSafe began as a two-person firm in 1980, navigating complex regulatory compliance issues on behalf of our clients. We nurture our people with growth and development opportunities. We build enduring, trustworthy relationships with each of our clients, with a focus on high ethical and safety standards. We build this reputation by attracting high-quality people and retaining them for the long term. At EnSafe, we are dedicated to fostering a diverse and authentic workplace, so if you are excited about this role but your experience does not align perfectly with every qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles at our company. EnSafe is committed to being an EEO employer and all qualified candidates will receive consideration without regard to race, color, religion, national origin, citizenship, age (except for bona fide occupational qualifications), sex, disability, sexual orientation, gender identity, marital status, military or veteran status, any other status protected by federal, state, or local law, or association with a person on the basis of one or more of the foregoing. Check us out on the web at

Job DescriptionSalary: Job Title: Quality Control Engineer Location: New York Employment Type: Full-Time Why Should You Join AEIS? At AEIS, were proud to serve as the quality backbone on some of New York Citys most vital infrastructure projects. We dont just test materials we ensure public safety, durability, and long-term performance. As an Asphalt Inspector, youll be on the front lines of field testing and observation, supporting paving operations that shape NYCs transportation network. Youll be trained, equipped, and supported to grow in a technical and mission-driven career. Job Summary: We are seeking a proactive and detail-oriented Quality Control Engineer to join our team. This is an on-site role that involves coordinating with subcontractors, reviewing drawing sheets, identifying deficiencies, and ensuring that the project is completed by closing all deficiencies. Experience working with the Port Authority and at airports is must to execute the required project. Key Responsibilities: • Coordinate day-to-day quality control activities with subcontractors on the field., • Interpret and review project drawings and technical specifications to ensure adherence to quality standards., • Identify, document, and report any deficiencies or deviations from standards., • Conduct inspections and audits to verify compliance with client and regulatory requirements., • Maintain detailed and accurate records of quality checks, reports, and corrective actions., • Collaborate with project managers and engineers to resolve quality issues promptly., • Support continuous improvement initiatives and ensure quality protocols are followed. Required Qualifications & Skills: • Bachelors degree or diploma in Engineering, Construction Management, or a related field., • Minimum 23 years of hands-on experience in a quality control role, preferably within construction or infrastructure projects., • Familiarity with Port Authority project requirements is a must., • Strong understanding of construction drawings and site procedures., • Excellent communication and coordination skills., • Ability to work independently in a fast-paced, field-based environment. Preferred Qualifications: • Work alongside engineers, lab staff, and senior inspectors, closely controlling the deficiencies and using your skills to expedite project completion, • Access internal training pathways to broaden your certifications and credentials, • Competitive compensation, • Full-time opportunity with technical and career growth paths, • 401(k), • Health, Dental, Vision Insurance, • Paid Time Off (PTO), • Professional Development Support, • Employee Referral Program, • Internal mentorship and cross-training opportunities

Manager, Clinical Operations - Clinical Engineering - Mineola.NYU Langone HospitalLong Island is a 591-bed university-affiliated medical center, which offers sophisticated diagnostic and therapeutic care in virtually every specialty and subspecialty of medicine and surgery.We are a major regional he

Job Description Senior HVAC Engineer Type: Full Time / Part Time Location: New York City About the Job NY Building Systems Consultant Inc. (NYBSC) is a Professional Engineering and Energy Consulting Company. It was formed by industry professionals that each has a more than 10 years’ experience. NYBSC Energy and Engineering team is comprised of individuals with complete industry certifications including NYS & CTS Registered Professional Engineers (PE), Existing Building Commissioning Professional (EBCP), Certified Energy Auditor (CEA) and Certified Energy Manager (CEM). We are currently seeking Senior HVAC Engineer for our design and build team in our New York City office. Equal Employment Opportunity is a vital component of our company culture and our success. We offer a competitive salary, vacation, and personal days. Experience: You should have demonstrated experience in at least five of the following areas: · Load calculations and some Energy modeling experience · Design mechanical systems including: heating, cooling, heat rejection, air and water distribution, ventilation, air conditioning, building automation and controls. · Familiarity with codes, specifically NYCECC, CMR, IMC, ASHRAE standards 55, 62.1, 90.1 · Familiar with LL97, LL87, energy auditing and commissioning. · Prepare contract drawings detailing the designed systems using AutoCAD. · Select equipment for use in building systems. · Manage a small project, work area or technical skill set, monitor quality of work, and is involved in client liaison. Requirements: Ø Bachelor’s Degree in Mechanical Engineering with a sound knowledge of mechanical engineering fundamentals. Ø 4+ years of experience in commercial and residential HVAC design. Ø PE License preferred. Ø LEED AP preferred. Ø Experience in Revit preferred. Ø Proven interest in the field of building design and energy savings. Qualities: v Good communication skills essential for team-based working v Excellent planning and organization skills required for our fast-paced environment v Must be highly motivated, proactive and willing to take on new challenges Benefits:

Job Description Required Knowledge, Skills, and Abilities: Preferred Knowledge, Skills, and Abilities: Environmental, Health & Safety Requirements: *Contract Specialties Group is an Equal Opportunity Employer. We consider applicants without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender, gender identity, gender expression, sexual You should be proficient in: • Electrical Schematics, • 120/208/240/480 Voltage Systems, • Commercial Electrical Expertise, • Electrical Installation, • Electrical Repair, • National Electrical Code (NEC), • Conduit Pulling, • Engineering Degree

Job Description Who We Are: St. John’s Episcopal Hospital is the only hospital providing emergency and ambulatory care to the densely populated, culturally and economically diverse, and medically underserved populations of the Rockaways and Five Towns in southern Queens County and southwestern Nassau County, New York. Celebrating over 110 years of community care, the 257-bed facility provides people of all faiths with comprehensive preventive, diagnostic treatment and rehabilitative services, regardless of ability to pay. Come Grow With Us! Type: Full-Time Shift: Days Hours: 9:00AM - 5:30PM Pay: $95,000 - $115,000 Job Summary: The Security Engineer II is a key member of the Information Security team responsible for designing, implementing, and maintaining the security of the EHS network infrastructure. This role involves hands-on work with a variety of security technologies to protect our systems from internal and external threats. The ideal candidate will have a strong background in network security principles, hands-on experience with enterprise-grade security tools, and a passion for protecting critical healthcare data. The successful candidate will work collaboratively within the information security and IT teams but must also be a self-starter capable of managing projects independently. This role participates in an on-call escalation rotation for critical security incidents that occur off-hours. Responsibilities: • Design, implement, and manage network security solutions, including firewalls, intrusion detection/prevention systems (IDS/IPS), VPNs, and network access control (NAC)., • Implement and manage data loss prevention (DLP) controls across on-premise and cloud environments to protect sensitive information., • Develop and implement automation for security processes, including identity and access management (IAM) provisioning and security incident response workflows., • Monitor network traffic for security incidents and events; conduct investigations and respond to security breaches., • Perform regular security assessments, vulnerability scanning, and penetration testing of the network infrastructure., • Develop and maintain network security policies, procedures, and documentation., • Collaborate with IT and clinical teams to ensure that new and existing applications and systems are implemented with appropriate security controls., • Manage and maintain security hardware and software, including patching, upgrading, and troubleshooting., • Participate in the security incident response team and provide expertise during security events., • Bachelor's degree in Computer Science, Information Technology, Cybersecurity, or a related field, or equivalent work experience., • 3-5 years of proven experience as a Network Security Engineer or in a similar role., • Hands-on experience with enterprise security solutions, including Next-Generation Firewalls (e.g., Palo Alto Networks, Fortinet), Network Detection and Response (NDR), Endpoint Detection and Response (EDR), SIEM, and Single Sign-On (SSO) in both on-premise and cloud environments (Azure, AWS)., • Strong understanding of networking protocols (TCP/IP, DNS, DHCP, BGP, OSPF)., • Experience with security information and event management (SIEM) systems (e.g., Splunk, QRadar)., • Knowledge of vulnerability assessment tools (e.g., Nessus, Qualys)., • Professional certifications are highly desirable, such as CISSP, PCNSE, CCNA, CompTIA CySA+, or relevant GIAC certifications (GCIH, GCIA).

Job Description Location: ONSITE: Mineola NY Pay: $70-80K/yr Excellent benefit package 1-2 years APM required Duties and Responsibilities: Responsible for project administration from sales kickoff to final completion including; • Maintaining project documentation and managing project deadlines/ Q/A-Q/QC, budgeting, • Assist / coordinate with Project Managers for the successful delivery of the work., • Review of project deliverables and developing the project Schedule of Values., • Confirm materials required, generate P.O.s and track to meet delivery date RFI's, SOP drawings., • Confirm subcontractors required, generate P.O.s, manage required insurance requirements to meet corporate compliance., • Tracking project progress and performance. Identify issues that will cause negative variance remotely with field team., • Coordinate with Project Team members and interact with Finance Team for billings and monthly project financial forecasting., • Track change orders, collaborating with sales, • Develop & execute AIA billings., • Internal: Construction and Service Project Teams, Project Managers, Finance Team, President, Director of Operations, and General Manager., • External: Clients, acting as a Dynaire representative., • Medical, • Dental, • Vision, • 401K, • Vacation / PTO, • Excellent Advancement Opportunities 4 year Engineering degree highly preferred Note: Dynaire is a non-union shop, however we offer competitive salaries based on experience. Dynaire is a Crete United Company, we encourage you to check Crete’s Website

Job Description Are you a skilled Imaging Service Engineer looking to bring your expertise to a respected medical center in East Meadow, NY? We're seeking a motivated professional to join a high-performing clinical engineering team, where you'll maintain and support a wide range of diagnostic imaging equipment to ensure patient safety and operational excellence. What You’ll Do * Inspect, repair, maintain, and calibrate imaging systems and medical equipment * Support MRI/CT and CathLab technologies with expert-level troubleshooting * Partner with clinical staff to identify and resolve equipment issues * Ensure compliance with safety, regulatory, and quality standards * Maintain accurate service documentation and reports * Assist with on-call support rotation as needed Must-Have Qualifications * Associate’s degree or equivalent experience in biomedical engineering, electronics, or a related technical field * 5+ years of hands-on experience servicing imaging equipment in healthcare environments * In-depth knowledge of MRI, CT, and CathLab equipment * Familiarity with hospital safety standards and regulatory guidelines * Excellent communication, problem-solving, and time management skills Nice to Have * Experience with Hologic imaging systems * Military technical training or OEM certifications Why Join This Opportunity * Contribute to critical patient care by ensuring the reliability of life-saving imaging technologies * Be part of a trusted medical institution in the heart of Long Island * Gain long-term career development support and on-the-job training • Medical, Dental, Vision Care and Wellness Programs, • 401(k) Plan with Matching Contributions, • Paid Time Off and Company Holidays

Job DescriptionA confidential industry leader in precision-engineered fluid control systems is seeking a Director of Design Engineering to oversee its design, project engineering, and test lab operations. This is a key leadership role reporting directly to the VP of Engineering, responsible for driving innovation, managing teams, and ensuring technical excellence across new product development.Key Responsibilities: * Lead and manage all activities within the Design Engineering, Project Engineering, and Test Lab departments. * Translate organizational goals into department objectives and deploy resources accordingly. * Review and approve all new product designs to ensure compliance with industry standards and company goals. * Implement systems, procedures, and tools to optimize engineering workflows and technical outcomes. * Prepare performance evaluations for engineering section heads and support career development. * Oversee staffing plans, hiring needs, and capital expenditure requests. * Participate in strategic bid/no-bid decision meetings for new programs Qualifications: * B.S. in Mechanical Engineering required; Master’s degree preferred * 10+ years of experience in hydraulic system design and mechanical product development * Proven track record in conceptual design, prototyping, and full lifecycle development * Strong leadership experience overseeing cross-functional engineering teams * Experience in high-precision, highly regulated manufacturing environments preferred Additional Requirements: * Ability to occasionally lift or move up to 20 pounds * Comfortable working in both office and shop floor environments * Exposure to noise, dust, and mechanical equipment when supporting lab operations Why This Role? This is a high-impact opportunity to shape the engineering direction of a well-established, innovation-driven manufacturer. You’ll lead a team responsible for designing products used in mission-critical applications, where precision, performance, and reliability are paramount.

Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. Ability to provide guidance to junior level engineers. Perform a wide range of civil engineering analysis and d

Audit Partner, Architecture, Engineering & Construction. Audit Partner, Architecture, Engineering & Construction. Audit, Architecture, Engineering & Construction (AEC).

Position Summary: The Director, Manufacturing Engineering (ME Director) is responsible for supporting business goals including product cost and quality, schedule adherence and delivery on-time to customer demand. It is a hands-on position that is responsible for ensuring the manufacturing processes, tooling, equipment support the Safety, Quality, Delivery and Productivity goals of the business. This ME Director plays an integral part in plant operations, special projects, OPEX, and is responsible for developing and maintaining motivated team and for supporting budgetary and production targets. The position has direct reports but must be able to work in partnership with Engineering, Quality, Supply Chain and Production in support of the departmental objectives. Supervisory Responsibilties: • The Manufacturing Engineering team is responsible for developing the standard processes used to manufacture heat exchangers including selection and definition of all tooling, equipment, fixtures, and anything else related to the process. The team is responsible to ensure all production processes are defined using the standard work formats and templates as well as to create any training documents required to ensure production operators can perform the work in accordance with the documented standard., • Support and drive continuous improvements in manufacturing metrics including quality, yields, cycle time, productivity, and cost. Promote process improvement, and LEAN manufacturing methodologies and 5S processes., • Implement and drive continuous improvement activities through implementation of change management process and best practices., • Timely and thorough implementation of engineering changes. Actively partner in the creation and review of engineering changes when needed., • Establish and monitor overall performance for product and quality standards; recommend process improvements / quality control programs. Recommend changes in work practices to improve production standards and product quality., • Ensure the ME team is properly deployed to support the daily needs of the business, new product introduction, cost reduction projects, or other duties as needed., • Oversee the Operational Excellence (cost reduction) plans for the site. Coordinate and manage the projects at a tactical level and develop the project tracking tools to report out to senior management., • Coordinate, review, and present data for the purchase of capital equipment, tooling improvements to audiences at various levels of the company., • Provide technical support and recommendations to both internal and external customer technical/quality teams regarding process improvements, non-conforming parts, defects, and repair/rework., • Author annual performance reviews and develop continuing education and advancement paths for entire department. Required Skills and Abilities: • Must possess solid analytical skills in forecasting and anticipating production needs and capabilities., • Must be able to prioritize workload in a multitasking environment, short-term tactical along with longer term strategic activities., • Must be able to work independently with minimum supervision and have the ability to interact positively and motivate others, • Excellent verbal and written communication skills; fluency in Spanish is preferred., • Experience with MRP systems; preferably Oracle., • Proficient in Microsoft Office programs to include Teams, Word, Excel, and PowerPoint., • Willingness to work a flexible schedule to get the job done., • Exceptional communication skills; promoting teamwork and a positive work environment., • Experience should include build-to-order manufacturing management experience in medium volume/high-mix production environments, preferably in the military or aerospace industries., • Demonstrated history of successful change management and implementation of operational excellence improvements such as lean manufacturing, demand flow, and six sigma., • Strong ability to communicate with all levels of the organization from the production floor to the executive office; strong interpersonal, leadership, & organizational skills. Education and Experience: • Bachelor's degree in engineering, Manufacturing Engineering preferred, or other technical related discipline is required; MBA or other relevant advanced degree is preferred., • Minimum 8 years experience in a manufacturing environment, including managing salaried and hourly staffs., • Minimum 5 years using continuous improvement methodologies, LEAN, Six Sigma, etc. is preferred. Other • Due to contracts with the United States Government, the candidate must be either a US Citizen or Green card holder Physical Requirements: • None Compensation Employee Type: Salaried Salary Minimum: $175,000 Salary Maximum: $195,000 Incentive: No Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location. For more information on AMETEK's competitive benefits, please click here. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.0 billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers' most complex challenges. We employ 21,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK (NYSE:AME) is a component of the S&P 500. Visit for more information. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call 1 (866) 263-8359. Nearest Major Market: Long Island Nearest Secondary Market: New York City

Position Summary: The Director, Manufacturing Engineering (ME Director) is responsible for supporting business goals including product cost and quality, schedule adherence and delivery on-time to customer demand. It is a hands-on position that is responsible for ensuring the manufacturing processes, tooling, equipment support the Safety, Quality, Delivery and Productivity goals of the business. This ME Director plays an integral part in plant operations, special projects, OPEX, and is responsible for developing and maintaining motivated team and for supporting budgetary and production targets. The position has direct reports but must be able to work in partnership with Engineering, Quality, Supply Chain and Production in support of the departmental objectives. Supervisory Responsibilties: • The Manufacturing Engineering team is responsible for developing the standard processes used to manufacture heat exchangers including selection and definition of all tooling, equipment, fixtures, and anything else related to the process. The team is responsible to ensure all production processes are defined using the standard work formats and templates as well as to create any training documents required to ensure production operators can perform the work in accordance with the documented standard.\n, • Support and drive continuous improvements in manufacturing metrics including quality, yields, cycle time, productivity, and cost. Promote process improvement, and LEAN manufacturing methodologies and 5S processes.\n, • Implement and drive continuous improvement activities through implementation of change management process and best practices.\n, • Timely and thorough implementation of engineering changes. Actively partner in the creation and review of engineering changes when needed.\n, • Establish and monitor overall performance for product and quality standards; recommend process improvements / quality control programs. Recommend changes in work practices to improve production standards and product quality.\n, • Ensure the ME team is properly deployed to support the daily needs of the business, new product introduction, cost reduction projects, or other duties as needed.\n, • Oversee the Operational Excellence (cost reduction) plans for the site. Coordinate and manage the projects at a tactical level and develop the project tracking tools to report out to senior management.\n, • Coordinate, review, and present data for the purchase of capital equipment, tooling improvements to audiences at various levels of the company.\n, • Provide technical support and recommendations to both internal and external customer technical/quality teams regarding process improvements, non-conforming parts, defects, and repair/rework.\n, • Author annual performance reviews and develop continuing education and advancement paths for entire department.\n Required Skills and Abilities: \n • Must possess solid analytical skills in forecasting and anticipating production needs and capabilities.\n, • Must be able to prioritize workload in a multitasking environment, short-term tactical along with longer term strategic activities.\n, • Must be able to work independently with minimum supervision and have the ability to interact positively and motivate others\n, • Excellent verbal and written communication skills; fluency in Spanish is preferred.\n, • Experience with MRP systems; preferably Oracle.\n, • Proficient in Microsoft Office programs to include Teams, Word, Excel, and PowerPoint.\n, • Willingness to work a flexible schedule to get the job done.\n, • Exceptional communication skills; promoting teamwork and a positive work environment.\n, • Experience should include build-to-order manufacturing management experience in medium volume/high-mix production environments, preferably in the military or aerospace industries.\n, • Demonstrated history of successful change management and implementation of operational excellence improvements such as lean manufacturing, demand flow, and six sigma.\n, • Strong ability to communicate with all levels of the organization from the production floor to the executive office; strong interpersonal, leadership, & organizational skills.\n Education and Experience: \n • Bachelor's degree in engineering, Manufacturing Engineering preferred, or other technical related discipline is required; MBA or other relevant advanced degree is preferred.\n, • Minimum 8 years experience in a manufacturing environment, including managing salaried and hourly staffs.\n, • Minimum 5 years using continuous improvement methodologies, LEAN, Six Sigma, etc. is preferred.\n\n Other • Due to contracts with the United States Government, the candidate must be either a US Citizen or Green card holder\n Physical Requirements: • None\n Compensation Employee Type: Salaried Salary Minimum: $175,000 Salary Maximum: $195,000 Incentive: No Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location. For more information on AMETEK's competitive benefits, please click here. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.0 billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers' most complex challenges. We employ 21,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK (NYSE:AME) is a component of the S&P 500. Visit for more information. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call 1 (866) 263-8359.

This role ensures effective communication with the Chief Engineer and MCCS management while supervising all Tradesmen and Facility Maintenance personnel, including Technicians, Electricians, Painters, and Carpenters. The Chief Engineer II mentors, coaches, and trains field staff, ensuring high perfo

New York Institute of Technology's six schools and colleges offer undergraduate, graduate, and professional degree programs in in-demand disciplines including computer science, data science, and cybersecurity; biology, health professions, and medicine; architecture and design; engineering; IT and di

The BS Engineering Management program at New York Institute of Technology is looking for adjunct faculty to teach courses for this program, such as Operation Research, Senior Design, Technology and Global Issues. New York Institute of Technology's six schools and colleges offer undergraduate, gradua

Design testing methods and test finished products or process capabilities to establish standards or validate process requirements. Manufacturing Process Engineer. Apply continuous improvement methods such as lean manufacturing to enhance manufacturing quality, reliability, or cost-effectiveness, inc

Job DescriptionResident Engineer-Queens, NY Laland Baptiste, LLC is a certified minority and woman owned construction management and consulting firm. Laland Baptiste provides innovative and professional services throughout all phases of the construction life cycle. We pride ourselves as being loyal and reliable to our customers, clients, and our greatest assets, our people. Laland Baptiste is dedicated to providing unparalleled services throughout the construction life cycle. These services include Construction Management, Program Management, Owners Representation, Resident Engineering, Inspection, Preconstruction Consulting, Change Order Review, Value Engineering, Administration Assistance, Document Control and Staff Augmentation. Our clients include NYS Office of General Services, Dormitory Authority of the State of New York, NYC Health + Hospitals, State University of New York, NYC Department of Design and Construction, NYC Parks & Recreation, NYC School Construction Authority, NYC Economic Development Corporation, Battery Park City Authority, and NYS Parks, Recreations and Historic Preservation. Resident Engineer for Queens and Staten Island to work on Parks projects, that include all field inspections and administrative services for current or future project opportunities. The Resident Engineer must have a degree in Engineering, Architecture, Landscape Architecture or better and/or NYS Professional Engineer (PE) License, and a minimum of three (3) years construction management specialized in green infrastructure and work within the NYC boroughs. The track record of the Resident Engineer shall have completed projects with scope complexity, budget and time issues. The RE shall prepare daily/weekly reports, calculation books, meeting minutes, payments, cost analysis, change orders, overruns, directives, etc. Prior NYC or NYS Parks experience is a plus. PAY RATE: $60.00-$75.00/Hourly Salary. Actual compensation will be dependent on the individual’s qualifications, skills, experience, education, and physical work location. JOB LOCATION: On-Site (11691) BENEFITS OF WORKING AT LALAND BAPTISTE: Medical / Prescription Plan Dental / Vision Plan Life Insurance Short / Long Term Disability Plan Flexible Spending Accounts 401K Vacation, Holiday, and Personal Days Sick Leave Baptiste University - Continuing Education Laland Baptiste LLC, is an Equal Opportunity Employer Powered by JazzHR 2OcTZMV3ZW

Job Description Summary: Parabit Systems, a well-established and rapidly expanding company in the security and self-service equipment industries, is currently seeking an experienced Firmware Engineer to participate in all aspects of the design and maintenance of hardware and firmware for its products. Candidate needs to demonstrate the ability to use appropriate development tools, compilers, and simulation. Must be capable of working within a team environment to plan, organize, execute and thoroughly document complex system designs. Test and debug skills are necessary; must understand interoperability of hardware and software. Must be able to manage and support multiple tasks on a consistent basis, while providing the highest level of service. Good verbal and writing skills are necessary. Full life-cycle software development; programming to include conceptual design, general coding, release to manufacturing testing, and quality assurance. Candidate needs to be able to produce final release software for manufacturing including associated documentation. Job Requirements: • A qualified candidate must have a BS or higher with 10+ years of relevant applied experience in Computer Science or Electrical Engineering. The ideal candidate will have a clear understanding of and hands-on experience with microprocessor firmware development., • Experience with Microcontroller competencies: Microchip, Nordic ARM cortex., • Experience with writing bootloaders for microprocessors on new and existing PCBAs., • Experience with writing embedded firmware in C for a Real-Time Operating System (RTOS)., • Experience with Bluetooth/NFC implementation., • Experience with network communication protocols (TCP/IP, UDP), • Experience with common communication protocols (I2C, SPI, RS485/RS232 and USB), • Experience with Microchip's Tools - MPLAB / MPLAB X / Harmony, • Experience developing embedded / IoT device software / firmware., • Knowledge and experience with analog, digital and embedded systems design, development, test engineering, and manufacturing., • Ability to read hardware block diagrams, schematics, and wiring diagrams., • Must be capable of thoroughly documenting complex system designs. Benefits: • Medical, • Dental, • Vision, • 401K, • Group Life All employment candidates must pass: a NON-DOT Drug screening, Criminal and Credit Background Check and a Driver License Check prior to employment.

Job Description Position Overview We are seeking a passionate and detail-oriented Junior Architect to join our team. In this role, you will work closely with Principal and project managers on all phases of design and construction documents. You will participate in ideation, drafting, 3D modeling, and client presentations, gaining hands-on experience and exposure to different project types. Key Responsibilities • Collaborate with senior architects on schematic design, and design development., • Prepare architectural drawings, sketches, and 3D models using software such as AutoCAD, Revit, and SketchUp., • Contribute to the creation and review of construction documents and specifications., • Coordinate with consultants (structural, MEP, etc.) to integrate their work into architectural designs., • Conduct site visits for measurements, assessments, and inspections., • Assist in client presentations and maintain effective communication with project stakeholders., • Bachelor’s or Master’s degree in Architecture (or equivalent)., • 2–3 years of professional experience in an architectural office or internship, • Proficiency in AutoCAD, Revit, SketchUp, and Adobe Creative Suite., • Strong knowledge of architectural principles, building codes, and construction methods., • Excellent communication and interpersonal skills; ability to work effectively in a collaborative team., • Strong attention to detail with a willingness to learn and adapt to new challenges., • Competitive compensation, commensurate with experience., • Opportunities for professional development, including licensure support and mentoring., • A friendly, collaborative work environment with a focus on excellence., • Exposure to a variety of project types, from small-scale residential to larger commercial projects.Company DescriptionSince its foundation in 2003, mssa has become a well-established practice specialising in Hospitality and Mix Use buildings. Our experience across these core sectors has led to a substantial amount of Hospitality and Mixed Use projects in recent years resulting in a diverse project portfolio.Since its foundation in 2003, mssa has become a well-established practice specialising in Hospitality and Mix Use buildings. Our experience across these core sectors has led to a substantial amount of Hospitality and Mixed Use projects in recent years resulting in a diverse project portfolio.

Job Description Job description Golden Glow Architectural Studios is a professional design services corporation that provides building code and zoning analysis, per-construction services, tenant protection plans and drafting services in New York City. We provide our clients with in-depth analyses and conduct phased plan reviews from schematic design through construction documents. The ideal candidate will exhibit high standards, excellent communication skills, and have an ability to take initiative, and prioritize daily tasks. A strong ability to take charge and meet tight deadlines will ensure your success in this multi-faceted role. All are encouraged to apply. Responsibilities • Ensuring overall design intent of the project team is incorporated into the detailed documentation., • Monitors the design process from conceptual phase through construction administration, ensuring the design idea is consistent and properly executed., • Preparing Façade Repair Drawings, both individually and with the assistance of our drafting team, as scheduling and company workload requires, • Plans and develops projects of various sizes and works under supervision, • Investigates, evaluates, and recommends design solutions, prioritizes work, receives guidance on complex issues, • Assisting the owner with bid, negotiation, and award of contractors: (1) façade repair, sidewalk shed and adjacent property protection contractors; and (2) where we are contracted as the Construction Manager on non-LL11 projects., • Participates in construction administration by reviewing shop drawings and submittals, responding to RFI’s, working to solve construction issues, and performing site visits to assess general conformance with the design concept, • Strong drafting skills -able to self-perform and guide staff junior architects in the production of construction documents, • Familiarity with NYC agencies having jurisdiction – primarily DOB, FDNY, DOT, DPR and DCP, assist in building code and zoning reviews when needed., • Assists with marketing and business development activities, • Coordinating the work of junior professionals and technicians, • Consistently reviews work and communicate needs and concerns to project staff., • Bachelor's degree or equivalent experience, • Architecture registration required., • Strong interpersonal, customer service, writing, and communication skills., • Good understanding of construction, building codes and zoning, • Experience in architecture including project and construction documentation., • Ability to work on multiple, fast-paced projects and documents., • Experienced in Revit and AutoCAD software, • Architecture & Planning We offer a comprehensive benefits package that includes medical, dental, vision, FSA and 401(k). We are an equal opportunity employer.

Job DescriptionOverview This position requires United States Citizenship. We are seeking a talented and motivated Electrical FPGA Engineer to join our dynamic team in Uniondale, NY. In this role, you will leverage your expertise in electrical and electronic systems to design, develop, and implement FPGA solutions that meet our clients' needs. If you are passionate about innovation and enjoy working in a collaborative environment, we want to hear from you! Responsibilities • Design and develop FPGA architectures for various applications., • Collaborate with cross-functional teams to define project requirements and specifications., • Conduct simulations and testing to validate FPGA designs., • Troubleshoot and debug hardware and software issues related to FPGA implementations., • Document design processes and maintain project records., • Stay updated with the latest industry trends and technologies in FPGA development. Qualifications, • Bachelor's degree in Electrical Engineering, Electronics, or a related field., • Proven experience with electrical and electronic systems., • Strong understanding of FPGA design tools and methodologies., • Proficiency in hardware description languages (HDLs) such as VHDL or Verilog., • Excellent problem-solving skills and attention to detail., • Electrical / Electronic Systems, • Engineering Degree

R&D Engineer - SVD for our Clifton Park, NY HQ loc and may work remotely from any approved U.

As a Combat Engineer, youll work quickly and skillfully to help Soldiers navigate while on combat missions by constructing bridges, clearing barriers with explosives, and detecting and avoiding mines and other environmental hazards. You'll provide expertise and come up with quick and creative engine

Job "R&D Engineer – SVD.

In this position, you will: • Build on your Electrical/Computer engineering knowledge and develop strong Systems Engineering and troubleshooting skills • Develop a deep understanding of the design and development of naval nuclear power plants and the functions of instrumentation and control sy

Responsibilities include: • Drive innovation initiatives that help to improve steam and reactor plant system performance, operation, or maintenance • Provide resolution of operating fleet and shipyard technical issues • Lead design changes such as developing detailed designs, shipboard use

As a Combat Engineer, youll work quickly and skillfully to help Soldiers navigate while on combat missions by constructing bridges, clearing barriers with explosives, and detecting and avoiding mines and other environmental hazards. You'll provide expertise and come up with quick and creative engine

Required Combination of Knowledge and Skill Bachelors degree from an accredited college or university in a related engineering or science field; or Masters degree from an accredited college or university in a related engineering or science field. Looking for a lifetime career? Apply today! Job D

Job training for a combat engineer requires 14 weeks of One Station Unit Training, which includes Basic Combat Training and Advanced Individual Training. As a Combat Engineer, youll work quickly and skillfully to help Soldiers navigate while on combat missions by constructing bridges, clearing barri

Bachelors degree in Industrial Engineering, Manufacturing Engineering or other relevant degree. Manufacturing Process Engineer. Review product designs for manufacturability or completeness; including purchasing equipment, materials, or parts and preparing documentation for new manufacturing processe

R&D Engineer - SVD for our Clifton Park, NY HQ loc and may work remotely from any approved U.

Bachelors degree in Industrial Engineering, Manufacturing Engineering or other relevant degree. Review product designs for manufacturability or completeness; including purchasing equipment, materials, or parts and preparing documentation for new manufacturing processes or engineering procedures. Man

Degree in Mechanical Engineering, Manufacturing Engineering, or related field preferred. Senior CNC Manufacturing Engineer. Collaborate with engineering, production, and R&D to optimize machining strategies.

Process Engineer (95-120K) We have an excellent opportunity available for a Process Engineer in the Utica/Rome, NY area. As a Process Engineer, you’ll work to develop and optimize processes that strengthen quality, cut costs, and elevate productivity throughout the organization. Education and Expe

D in Chemical Engineering, Materials Science, Electrical Engineering, or equivalent Engineering and/or Science discipline from a college or University accredited by the USDOE or internationally recognized accrediting organization AND 3 years relevant professional industry experience. Chemical Engine