Trabajos construction engineer en New Brunswick, New JerseyCrear alertas

If you are a Construction Project Engineer with 1+ years of ground-up construction experience then please apply! Why join us? Health, Dental, Vision and Life insurance fully covered! 401k match HSA and FSA plans Annual performance based bonuses Paid time off and holidays Parental leave Opportunity t

If you are a Construction Project Engineer with 1+ years of ground-up construction experience then please apply! Why join us? Health, Dental, Vision and Life insurance fully covered! 401k match HSA and FSA plans Annual performance based bonuses Paid time off and holidays Parental leave Opportunity t

Job Description Commercial HVAC Technician - Data Centers - High Tech Facilities Hourly Rate - Depends on Experience Well-respected Mechanical Contractor seeks experienced Senior Commercial HVAC Technician to join team. This is a lead role seeking techs with commercial experience! • Experience with Commercial HVAC, Chillers, Boilers, • Ability to supervise, • Factory certifications dealing with Chillers, • Install / Service - HVAC/ Refrigeration / AC / Motors / Heating Units / Pumps / Compressors / Furnaces / Boilers / Burners / Fans / Controls / Split Systems / RTU'S Send your resume to | Chris Coneys at Liberty Personnel Services Chris Coneys www.libertyjobs.com 610 684 8671 Key Words: HVAC, Building Automation, Controls, Field Service Technician, Installation, Maintenance, Service, Commercial systems, Automated Logic, Carrier, Johnson Controls, Trane, Andover Building Automation, BAS, DDC, BAC, BAU, Direct Digital Controls, MRI, LON, LonWorks, BACnet, MODbus, Johnson Controls, Delta Controls, Honeywell, Tridium, Alerton, Building Automation Technician, Building Automation Service, Building Automation Engineer, Staefa, Solidyne, Andover Controls, Siemens, Carrier, Trane, York, ME, Mechanical Engineering, HVAC, HVAC Controls, ASHRAE, Boiler, Boilers, Chillers, RTU’s, Roof Top Units, Split Systems, MEP, Project Engineer, Project Manager, LEED, CEM, CEP, Certified Energy Manager, Certified Energy Professional, ATC, ATC Controls, Automatic Temperature Controls, Invensys, Metasys, Automated Logic, Schneider Electric, TAC, Siemens, Niagara AX, NiagaraAX, Building Automation Graphics, EBI, Symmetre, EMS, BMS, temperature controls #midsenior \nCompany Description Libertyjobs.com has become an essential destination site for experienced job seekers. Our recruiters are continually posting active job openings to the website. Feel free to search our database of open positions and apply for your next career move! Hundreds of new jobs are listed on the site every month in a wide range of industries and locations. Last year we had over 900,000 unique job seekers visit our website, which means over 75,000 skilled job seekers search our openings every month. Established in 2003, Liberty Personnel quickly grew into one of the largest technical recruiting agencies on the East Coast. Today, Liberty Personnel has a national presence and a diverse client base. Listed below are a number of the industries and openings we work on: Information Technology, Software Programmers, Engineering, Manufacturing, Legal, Plant Maintenance, Construction, Oil and Gas, Medical Communications, Accounting, Finance, Electronics, Scientific, Medical Device, Sales, Pharmaceutical, Admin, Automation, Controls, Civil, HVAC, Wastewater, Structural, Electrical, Chemists, Validations, Logistics, Food Production, Renewable Energy and Machinists. Libertyjobs.com has become an essential destination site for experienced job seekers. Our recruiters are continually posting active job openings to the website. Feel free to search our database of open positions and apply for your next career move!\n\nHundreds of new jobs are listed on the site every month in a wide range of industries and locations. Last year we had over 900,000 unique job seekers visit our website, which means over 75,000 skilled job seekers search our openings every month.\n\nEstablished in 2003, Liberty Personnel quickly grew into one of the largest technical recruiting agencies on the East Coast. Today, Liberty Personnel has a national presence and a diverse client base. Listed below are a number of the industries and openings we work on:\n\nInformation Technology, Software Programmers, Engineering, Manufacturing, Legal, Plant Maintenance, Construction, Oil and Gas, Medical Communications, Accounting, Finance, Electronics, Scientific, Medical Device, Sales, Pharmaceutical, Admin, Automation, Controls, Civil, HVAC, Wastewater, Structural, Electrical, Chemists, Validations, Logistics, Food Production, Renewable Energy and Machinists.

Job Description BAS / HVAC Controls Technician | (Building Automation Services) Central & Northern New Jersey | Company Vehicle | Career Growth An established and growing Building Automation organization is expanding its service team and seeking an experienced BAS / HVAC Controls Technician to support commercial buildings and technically demanding facilities throughout Central and Northern New Jersey. This is an excellent opportunity for a Building Automation professional who enjoys troubleshooting complex controls issues, working with commercial HVAC systems, and supporting the reliable operation of building automation systems. The organization offers competitive compensation, a company-provided vehicle, a sign-on bonus, comprehensive benefits, ongoing technical training, and opportunities for long-term career advancement. Experience with Johnson Controls, Niagara N4, or other major BAS/DDC platforms is welcome. What You'll Be Doing • Troubleshoot, diagnose, and repair Building Automation and HVAC control systems across commercial facilities., • Service and support Johnson Controls, Niagara N4, and other DDC platforms., • Diagnose issues involving controllers, sensors, actuators, control wiring, and system communications., • Perform system startup, commissioning, point-to-point checkout, and equipment troubleshooting., • Make controller programming adjustments, graphics modifications, and system configuration changes as needed., • Support BACnet, Modbus, and third-party building system integrations., • Work with commercial HVAC equipment, including AHUs, RTUs, VAV systems, chillers, boilers, and related equipment., • Read and interpret control drawings, electrical schematics, and sequences of operation., • Assist with system upgrades, retrofits, and building automation optimization projects., • Work directly with customers and facility teams to resolve service issues and maintain system reliability., • Complete service documentation and provide technical recommendations. What We're Looking For • 2+ years of experience in Building Automation, DDC, HVAC Controls, or a closely related field., • Experience with Johnson Controls (Metasys, FX, CCT), Niagara AX/N4, or another major BAS platform., • Strong troubleshooting skills involving DDC controls, controllers, sensors, actuators, and field devices., • Solid understanding of commercial HVAC systems and equipment., • Familiarity with BACnet, Modbus, LON, or other building systems communication protocols., • Ability to interpret electrical schematics, control drawings, and sequences of operation., • Programming, commissioning, system integration, or graphics experience is a plus., • Strong communication skills and a customer-focused approach., • Valid driver's license and ability to travel locally throughout Central and Northern New Jersey. Compensation & Benefits • Competitive hourly compensation based on experience., • Company-provided vehicle and gas card., • Medical, dental, and vision insurance., • 401(k) with employer match., • Paid vacation, PTO, and holidays., • Life, short-term disability, and long-term disability coverage., • Ongoing technical training and professional development., • Strong backlog of service work and long-term organizational stability., • Opportunities to advance into Senior Technician, Controls Programmer, Project Engineer, or Project Management positions. Interested in Exploring Your Options? Whether your background is in Johnson Controls, Niagara, HVAC controls service, BAS integration, commissioning, or commercial building systems, I'd welcome a confidential conversation. Please send your resume to for consideration and further discussion. All communications will be handled 100% confidentially. Alex Showers Liberty Personnel Services #LI-AS1 #MechanialConstruction #BuildingAutomation #BAS #HVACControls #ControlsTechnician #BASTechnician #Niagara #Tridium #JohnsonControls #Siemens #Trane \nCompany Description Libertyjobs.com has become an essential destination site for experienced job seekers. Our recruiters are continually posting active job openings to the website. Feel free to search our database of open positions and apply for your next career move! Hundreds of new jobs are listed on the site every month in a wide range of industries and locations. Last year we had over 900,000 unique job seekers visit our website, which means over 75,000 skilled job seekers search our openings every month. Established in 2003, Liberty Personnel quickly grew into one of the largest technical recruiting agencies on the East Coast. Today, Liberty Personnel has a national presence and a diverse client base. Listed below are a number of the industries and openings we work on: Information Technology, Software Programmers, Engineering, Manufacturing, Legal, Plant Maintenance, Construction, Oil and Gas, Medical Communications, Accounting, Finance, Electronics, Scientific, Medical Device, Sales, Pharmaceutical, Admin, Automation, Controls, Civil, HVAC, Wastewater, Structural, Electrical, Chemists, Validations, Logistics, Food Production, Renewable Energy and Machinists. Libertyjobs.com has become an essential destination site for experienced job seekers. Our recruiters are continually posting active job openings to the website. Feel free to search our database of open positions and apply for your next career move!\n\nHundreds of new jobs are listed on the site every month in a wide range of industries and locations. Last year we had over 900,000 unique job seekers visit our website, which means over 75,000 skilled job seekers search our openings every month.\n\nEstablished in 2003, Liberty Personnel quickly grew into one of the largest technical recruiting agencies on the East Coast. Today, Liberty Personnel has a national presence and a diverse client base. Listed below are a number of the industries and openings we work on:\n\nInformation Technology, Software Programmers, Engineering, Manufacturing, Legal, Plant Maintenance, Construction, Oil and Gas, Medical Communications, Accounting, Finance, Electronics, Scientific, Medical Device, Sales, Pharmaceutical, Admin, Automation, Controls, Civil, HVAC, Wastewater, Structural, Electrical, Chemists, Validations, Logistics, Food Production, Renewable Energy and Machinists.

Senior Bridge Structural Engineer US-NJ-Edison Job ID: 2026-3253 of Openings: 1 Category: Civil/Structural Engineering LiRo-Hill Overview We have an immediate need for a Senior Bridge Structural Engineer to join our growing team in our Edison, NJ office. This position is focused on bridge and transportation structural projects for New Jersey agency clients, with an emphasis on NJDOT, NJTA, PANYNJ, NJ TRANSIT, county, and municipal work. The successful candidate will work closely with our recently hired bridge leadership in New Jersey and will play a key technical role in project delivery, client coordination, and the continued growth of LiRo-Hill’s bridge and transportation structural practice in the region. This is an excellent opportunity for a senior engineer, associate, or senior associate-level candidate who brings strong NJ agency experience and wants to help build a high-performing local bridge/structures team within a collaborative, multidisciplinary firm. Come join our team! We are looking to build services and capabilities through the growth of our key asset- our staff. Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. You can become part of an organization that has a strong track record and is looking to strengthen relationships and capabilities to continue being a trusted resource for our clients in the public and private sector. We are proud to be known as an “Integrated Construction, Design and Technology Solutions” firm and we have delivered on that label time and again. Recently, Global Infrastructure Solutions Inc. (GISI), the parent company of The LiRo Group and Hill International, Inc. consolidated a portion of the highly experienced staff of both LiRo and Hill in the Northeast to create a larger, more efficient, and cost-effective team to serve clients. LiRo-Hill is a 1100-person firm with offices in NYC, Long Island, Buffalo, Rochester, Boston and Edison, NJ. Responsibilities • Perform structural engineering analysis and design for bridge and transportation-related structures, including rehabilitation, replacement, preservation, and load rating assignments, • Serve as a senior technical resource for NJ agency work, with a strong working knowledge of NJDOT standards and familiarity with NJTA, PANYNJ, NJ TRANSIT, county, and municipal requirements, • Serve as lead designer or task lead on bridge structural assignments, including simple to moderately complex projects, • Support project managers and senior leadership with scope, schedule, budget, client coordination, and technical delivery, • Assist in site investigations to document existing conditions, including bridge inspection and condition assessment, • Complete and review design calculations; assist in the preparation of drawings, specifications, estimates, and technical reports, • Provide responses and solutions to issues during the construction administration phase of projects, • Coordinate work product with multidisciplinary and multi-office teams across civil, structural, architecture, MEP, and construction management, • Mentor junior staff and help strengthen LiRo-Hill’s local bridge/structures capabilities in New Jersey Qualifications • Bachelor of Science in Civil or Structural Engineering; Master’s degree preferred, • 10-15 years of related structural engineering experience, with a focus on bridge and transportation infrastructure, • NJ PE required; NY PE or additional licensure is a plus, • Strong experience with NJDOT standards required; NJTA, PANYNJ, NJ TRANSIT, county, municipal, NYCDOT, or NYSDOT experience is a plus, • Experience in bridge design, rehabilitation, inspection, load ratings, and preparation of contract documents, • Bridge inspection experience and certification is a plus, • Understanding and application of applicable bridge design codes, agency standards, and structural engineering requirements, • Experience using structural analysis and design software, • Ability to manage multiple tasks, coordinate with internal and external teams, and meet deadlines, • Strong written and verbal communication skills, with the ability to interface with clients and agency reviewers, • AutoCAD experience required; MicroStation, OpenBridge, or Revit experience is a plus Our Culture: We believe in the power of collaboration. We work hard to build a corporate culture that empowers all our employees to freely share their ideas, know their presence, and contributions are truly valued, fostering a climate where our employees are enabled to maximize their full potential. • We offer a comprehensive benefits package and a positive work environment, • Compensation: Minimum: $145,000; Maximum: $175,000. The range provided is the salary that the Firm in good faith believes at the time of this posting is willing to pay. Exact compensation will be determined on the individual candidate’s qualifications and location., • The selected candidate must be authorized to work in the United States; Visa sponsorship is not available for this role., • Please visit our website for all of our career opportunities at _ LiRo-Hill is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, race, color, creed, religion, national origin, ancestry, marital status, sex, affectional or sexual orientation, gender identity or expression, or protected veteran status; and will not be discriminated against on the basis of disability. #ID22 #ZR22 Compensation details: 145000-175000 Yearly Salary PI0b13532f33ea-38003-39453240

Senior Water Resources Engineer US-NJ-Edison Job ID: 2026-3300 of Openings: 1 Category: Civil/Structural Engineering LiRo-Hill Overview We have an immediate need for a Senior Water Resources Engineer for our Edison, NJ office. We are seeking a Senior Water Resources Engineer to play a key role in expanding and strengthening our transportation and infrastructure practice in our Edison, NJ office. This position offers the opportunity to help build and lead our in-house water resources capabilities in support of bridge, roadway, and resiliency-focused projects throughout NJ and NY, particularly for NJDOT, NJTA, NYSDOT, and NYSDEC clients. This is a strategic growth position. We are looking for an experienced Water Resource professional who is interested in helping shape a scalable practice — leading technical efforts, supporting pursuits, mentoring staff, and integrating hydraulic design with structural and civil engineering disciplines. The successful candidate will collaborate closely with bridge and roadway engineers to deliver integrated, permit-ready, and constructible solutions from planning and concept development through final design and construction. Come join our team! We are looking to build services and capabilities through the growth of our key asset- our staff. Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. You can become part of an organization that has a strong track record and is looking to strengthen relationships and capabilities to continue being a trusted resource for our clients in the public and private sector. We are proud to be known as an “Integrated Construction, Design and Technology Solutions” firm and we have delivered on that label time and again. Recently, Global Infrastructure Solutions Inc. (GISI), the parent company of The LiRo Group and Hill International, Inc. consolidated a portion of the highly experienced staff of both LiRo and Hill in the Northeast to create a larger, more efficient, and cost-effective team to serve clients. LiRo-Hill is a 1100-person firm with offices in NYC, Long Island, Buffalo, Rochester, Boston and Edison, NJ. Responsibilities • Lead hydrologic and hydraulic (H&H) analyses for bridge, culvert, and roadway projects, • Perform watershed modeling, rainfall-runoff modeling, and peak flow analysis using HEC-HMS, HydroCAD, or similar tools, • Develop and review HEC-RAS models (1D and/or 2D) for floodplain and open channel analysis, • Conduct bridge hydraulic evaluations, including scour analysis, waterway adequacy studies, and overtopping analysis, • Evaluate flood risk, floodplain impacts, and resiliency strategies considering sea level rise and climate change projections, • Prepare drainage reports and supporting documentation in compliance with NJ/NY Best Management Practices (BMPs) including Stormwater Pollution Prevention Plans (SWPPP or SPPP) for NJDOT, NJDEP, NYSDOT, and NYSDEC submissions, • Support flood hazard area and floodplain permitting efforts, • Coordinate closely with structural and civil engineers to align hydraulic modeling with bridge sizing, roadway profiles, and drainage design, • Lead drainage and stormwater management system design including storm sewer networks, culverts, detention/retention basins, green infrastructure, and outfall structures, • Participate in site visits and field investigations to document hydraulic conditions, • Provide technical support during construction administration, • Contribute to proposal efforts, qualifications packages, and business development initiatives to strengthen the firm’s H&H resume Qualifications • Bachelor of Science in Civil Engineering (Water Resources or related focus preferred), • 8–25 years of relevant water resource experience, including DOT project exposure, • NJ PE required; NY PE strongly preferred or ability to obtain, • Demonstrated experience with NJDOT, NJDEP, NYSDOT, and/or NYSDEC standards and permitting processes. Specifically experience in NJDEP Flood Hazard Control Act and Stormwater Management Regulations., • Proficiency with HEC-RAS required; experience with HEC-HMS, HydroCAD, PondPack and/or StormCAD preferred, • Bridge hydraulic and scour analysis experience required, • Experience preparing technical hydraulic reports for agency review, • Working knowledge of drainage system design and stormwater management, • Ability to manage multiple assignments, mentor junior staff and work as part of a team., • Strong written and verbal communication skills Growth Opportunity This position is part of a strategic initiative to expand our multidisciplinary transportation capabilities. The selected candidate will have the opportunity to help define modeling standards, guide technical quality, mentor junior engineers, and build a sustainable H&H practice within a collaborative environment. We are seeking a professional motivated to take ownership and contribute to the long-term development of the practice while delivering high-quality, defensible hydraulic solutions for public infrastructure projects. Our Culture: We believe in the power of collaboration. We work hard to build a corporate culture that empowers all our employees to freely share their ideas, know their presence, and contributions are truly valued, fostering a climate where our employees are enabled to maximize their full potential. • We offer a comprehensive benefits package and a positive work environment, • Compensation: Minimum: $140,000; Maximum: $170,000. The range provided is the salary that the Firm in good faith believes at the time of this posting is willing to pay. Exact compensation will be determined on the individual candidate’s qualifications and location., • The selected candidate must be authorized to work in the United States; Visa sponsorship is not available for this role., • Please visit our website for all of our career opportunities at _ LiRo-Hill is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, race, color, creed, religion, national origin, ancestry, marital status, sex, affectional or sexual orientation, gender identity or expression, or protected veteran status; and will not be discriminated against on the basis of disability. #ID22 #ZR22 Compensation details: 140000-170000 Yearly Salary PI591e4f4e91d0-38003-40102847

Senior Mechanical Engineer US-NJ-Edison Job ID: 2026-3254 of Openings: 1 Category: MEP LiRo-Hill Overview We have an immediate need for a Sr. Mechanical Engineer for our Edison, NJ location. Come join our team! We are looking to build services and capabilities through the growth of our key asset- our staff. Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. You can become part of an organization that has a strong track record and is looking to strengthen relationships and capabilities to continue being a trusted resource for our clients in the public and private sector. We are proud to be known as an “Integrated Construction, Design and Technology Solutions” firm and we have delivered on that label time and again. Recently, Global Infrastructure Solutions Inc. (GISI), the parent company of The LiRo Group and Hill International, Inc. consolidated a portion of the highly experienced staff of both LiRo and Hill in the Northeast to create a larger, more efficient, and cost-effective team to serve clients. LiRo-Hill is a 1100-person firm with offices in NYC, Long Island, Buffalo, Rochester, Boston and Edison, NJ. Responsibilities In this role, you will lead the design and development of HVAC systems for commercial, industrial, municipal, and healthcare facilities. Additional responsibilities will include: • Lead the design and development of HVAC systems for commercial, industrial, municipal and healthcare facilities., • Perform load calculations, energy modeling, and system sizing using industry-standard software., • Prepare detailed mechanical drawings, specifications, details and controls diagrams., • Coordinate with multidisciplinary teams including architects, structural engineers, and other stakeholders., • Conduct site visits, field inspections, and construction administration including review of shop drawings, RFIs etc., • Mentor junior engineers and provide technical guidance., • Perform QA/QC reviews of projects to ensure high standards of quality are maintained., • Ensure compliance with local codes, standards and client requirements., • Interface with clients, attend project meetings, and present technical solutions., • Participate in project sales proposals and interviews., • Conduct site assessments and generate comprehensive technical reports. Qualifications • Bachelor’s degree in Mechanical Engineering, • Professional Engineer (PE) license required, • Minimum of 10 years of relevant experience in HVAC design, • Proficiency in AutoCAD, Revit, Microsoft Excel, Word, Teams and HVAC design software (e.g., Trane Trace, HAP), • Strong knowledge of mechanical codes, energy efficiency standards, and sustainable design practices, • Excellent leadership, mentoring and project management skills, • Strong technical writing and communication skills, • Certifications or Licenses (if required): PE License, NY, NJ We are committed to your success, and we invest in your growth and development to unlock your full potential. • Competitive Total Compensation Package, • Employee- Only Stock Purchase Plan, • Mentoring programs, • Continuing Education Program, • Employee referral bonus, • Volunteer/Industry association opportunities Our Culture: We believe in the power of collaboration. We work hard to build a corporate culture that empowers all our employees to freely share their ideas, know their presence, and contributions are truly valued, fostering a climate where our employees are enabled to maximize their full potential. -We offer a comprehensive benefits package and a positive work environment -Compensation: Minimum: $150,000: $170,000. The range provided is the salary that the Firm in good faith believes at the time of this posting is willing to pay for the advertised position. Exact compensation will be determined on the individual candidates’ qualifications and location. • The selected candidate must be authorized to work in the United States; Visa sponsorship is not available for this role. LiRo-Hill is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, race, color, creed, religion, national origin, ancestry, marital status, sex, affectional or sexual orientation, gender identity or expression, or protected veteran status; and will not be discriminated against on the basis of disability. #ID22 #ZR22 Compensation details: 150000-170000 Yearly Salary PI34ee6458bb1b-38003-39462574

Job DescriptionDescription About ArtheonArtheon is a trusted engineering and consulting firm offering services that rival large organizations while maintaining the personalized client relationships of a boutique firm. With expertise spanning civil/site engineering, environmental permitting, transportation infrastructure, construction management, and advanced surveying technologies, we are committed to delivering high-quality, timely solutions to local, state, and federal clients. We are seeking a motivated Project Engineer to join our Municipal Engineering team. In this role, you will contribute to the planning, design, and delivery of public infrastructure projects that enhance the safety, sustainability, and quality of life within the communities we serve. Working alongside experienced Project Managers and technical professionals, you will support municipal clients through every phase of project delivery from concept development and permitting to construction administration and project closeout. This position offers a strong opportunity for professional growth while working on diverse and impactful municipal engineering projects throughout New Jersey. The Project Engineer is responsible for preparing engineering designs, technical reports, construction documents, and permit applications for a wide variety of municipal infrastructure projects. The ideal candidate possesses strong technical abilities, excellent communication skills, and a commitment to delivering quality engineering solutions that meet client expectations, regulatory requirements, and project schedules. Responsibilities • Prepare engineering plans, specifications, estimates, and technical reports for municipal engineering projects., • Design roadway, drainage, stormwater management, utility, grading, and site improvements utilizing AutoCAD Civil 3D., • Prepare calculations supporting roadway geometry, stormwater management systems, water distribution, sanitary sewer, and utility improvements., • Coordinate project design with municipal officials, utility companies, county agencies, and regulatory authorities., • Prepare permit applications for NJDEP, county, and local agencies., • Assist Project Managers with project scheduling, budgeting, resource planning, and overall project execution., • Perform field investigations, site inspections, and construction observations., • Review contractor shop drawings, RFIs, submittals, payment applications, and change orders., • Attend client meetings, municipal council meetings, planning board meetings, and project coordination sessions as required., • Support the preparation of proposals, scopes of work, and engineering cost estimates., • Mentor junior engineering staff and contribute to technical quality control efforts.The successful candidate will support projects such as:, • Municipal roadway reconstruction, • Local street improvements, • Capital Improvement Programs (CIP), • Complete Streets initiatives, • Stormwater management systems, • Green infrastructure, • Water main replacements, • Sanitary sewer improvements, • Drainage improvements, • Parks and recreation facilities, • Municipal building site improvements, • ADA compliance improvements, • Sidewalk and pedestrian safety enhancements, • Municipal facility improvements, • Public bidding and construction administration Qualifications • Bachelor's degree in Civil Engineering from an accredited university., • 2–4 years of municipal or civil engineering consulting experience., • Engineer in Training (EIT) Certification required, • Professional Engineer License in NJ is a plus, • Experience preparing engineering plans and construction documents., • Proficiency in AutoCAD Civil 3D is required and proficiency in Microstation is a plus, • Knowledge of grading, drainage, utility, and roadway design., • Strong written and verbal communication skills., • Excellent organizational and time management abilities., • Valid driver's license. BenefitsThe base salary range for this role is indicated in the posting. This range reflects the company’s good faith estimate of the compensation for this position at the time of posting. Final compensation will be determined based on factors such as experience, skills, qualifications, internal equity, and geographic location. Artheon offers a competitive compensation package including medical, prescription, dental and vision coverage, 401(k) retirement plan with employer match, educational assistance program and paid time off/parental leave.

Job Description Maitra Associates has an immediate opening for an experienced Electrical Inspectors! In this role, you will provide Construction Management and Inspection Services on Projects mainly involving electrical, electronics, electrical substations, high tension work, A/C utility service, ITS, security and camera system, fire alarm monitoring systems, fire suppression system, building management systems, intercom system, radio systems, microwave systems. Some knowledge of mechanical, civil, structural, and plumbing systems is beneficial. Some nighttime and overtime work required with premium pay. Apply Today! Requirements: • Bachelor's degree in electrical engineering, • Minimum 5 years' experience inspecting construction work, varied in size (projects ranging from $500k to $5 million plus) and complexity (multiple crews and crew sizes per shift)., • OSHA 30-hour construction safety, and all protection, confined space, and permit-required confined space entry and certification in work zone safety, • Ability to stay late or come in early as needed; night and weekend shifts will be required., • Ability to pass a Background Check, • Valid Driver's license required., • Ability to communicate effectively, both orally and written. You will need to communicate with the Resident Engineer, Contract Staff, and Facility staff both in person and via two-way communications., • Ability to read and interpret plans and specifications, and to prepare written contract administration documentation, such as daily narratives (work reports), special inspection reports, daily time-and-materials records, and document unit-price work. Identify potential extra work issues and keep the Resident Engineer advised., • Prepare estimates of extra work. Prepare related sketches and documentation. Review plans for constructability and prepare comments. Review contractor payment requests and recommend reasonableness to the Resident Engineer. Working knowledge of the latest National Electric Code and testing criteria for all types of electrical systems. We Offer: • Competitive compensation structure!, • Comprehensive benefits package!, • Medical Insurance, • Dental Insurance, • Vision Insurance, • 401K, • Life Insurance, • Performance-based bonuses!, • 14 Paid Holidays!, • 10 Paid Vacation Days Apply Today! \nCompany Description Maitra Associates, P.C. (Maitra) is an established multi-discipline engineering design and construction management firm serving the needs of various clients in the transportation, institutional, and facilities markets. Since our founding in 1982, Maitra has grown from a two-person office to a regional firm headquartered in Bedminster, New Jersey and with offices in New York. We aim to award, manage, and complete projects in the Northeast and Mid- Atlantic Regions. Maitra offers professional services in several disciplines, including civil/site engineering, electrical engineering, mechanical engineering, and construction management and inspection. The firm’s diverse staff comprises experienced professionals who provide client-focused, technically superior, cost-effective engineering and construction inspection services within an interdisciplinary team environment. Maitra is entrepreneurial in spirit, reflecting a culture of flexibility, innovation, and responsiveness while providing the in-depth resources of a full-service organization. Maitra Associates, P.C. (Maitra) is an established multi-discipline engineering design and construction management firm serving the needs of various clients in the transportation, institutional, and facilities markets. Since our founding in 1982, Maitra has grown from a two-person office to a regional firm headquartered in Bedminster, New Jersey and with offices in New York. \r\n\r\nWe aim to award, manage, and complete projects in the Northeast and Mid- Atlantic Regions. Maitra offers professional services in several disciplines, including civil/site engineering, electrical engineering, mechanical engineering, and construction management and inspection. \r\n\r\nThe firm’s diverse staff comprises experienced professionals who provide client-focused, technically superior, cost-effective engineering and construction inspection services within an interdisciplinary team environment. Maitra is entrepreneurial in spirit, reflecting a culture of flexibility, innovation, and responsiveness while providing the in-depth resources of a full-service organization.

Job DescriptionDescriptionArtheon is seeking an Entry level Engineer to join our Water/Wastewater Engineering Department in East Brunswick, New Jersey. This is an excellent opportunity for a motivated, early-career engineer to gain hands-on experience supporting municipal water and wastewater infrastructure projects while working alongside a collaborative and experienced team. About ArtheonArtheon is a trusted engineering and consulting firm offering services that rival large organizations while maintaining the personalized client relationships of a boutique firm. With expertise spanning civil/site engineering, environmental permitting, transportation infrastructure, construction management, and advanced surveying technologies, we are committed to delivering high-quality, timely solutions to local, state, and federal clients. ResponsibilitiesEngineering Design & Drafting • Assist in the planning, design, and drafting of water and wastewater infrastructure projects, including water mains, sanitary sewers, pump stations, and related appurtenances., • Prepare plans, profiles, details, and calculations using AutoCAD Civil 3D and related design software.Permitting & Regulatory Support, • Support the preparation and submission of permit applications and technical documents to local, state, and federal agencies (e.g., NJDEP)., • Ensure designs comply with applicable codes, standards, and regulatory requirements.Project Collaboration, • Work closely with project managers, senior engineers, surveyors, and other disciplines to support project delivery from concept through construction., • Participate in coordination meetings and assist with responding to agency and client comments.Technical Documentation, • Prepare engineering reports, technical memoranda, feasibility studies, and design calculations to support project planning and execution. QualificationsEducation • Bachelor’s degree in Civil Engineering or a related engineering discipline.Experience, • 0–2 years of relevant engineering experience; internship or co-op experience in water, wastewater, or municipal engineering is a plus.Technical Skills, • Working knowledge of AutoCAD Civil 3D; familiarity with hydraulic software is a plus.Licensure, • Engineer-in-Training (EIT) certification required or ability to obtain within a reasonable timeframe., • Professional Engineer (PE) licensure is not required but encouraged in the future for growth.Core Competencies, • Strong analytical and problem-solving skills., • Effective written and verbal communication abilities., • Self-motivated, detail-oriented, and able to work effectively in a team-based environment. BenefitsThe base salary range for this role is indicated in the posting. This range reflects the company’s good faith estimate of the compensation for this position at the time of posting. Final compensation will be determined based on factors such as experience, skills, qualifications, internal equity, and geographic location. Artheon offers a competitive compensation package including medical, prescription, dental and vision coverage, 401(k) retirement plan with employer match, educational assistance program and paid time off/parental leave.

Job Description A key member of the Albireo Energy team, the Controls Design Engineer will be responsible for: • The design of building automation systems for large commercial office buildings, data centers, and educational facilities., • Participate in sales turnover meetings to receive project mechanical drawings, specifications, and details from the sales team., • Communicate with contractors to obtain any necessary documentation and coordinate to ensure compatibility/feasibility of all equipment., • Coordinate with MEP Design Engineers to provide recommended specifications and sequences for particular customers or sites., • Apply the appropriate equipment and end devices to provide the most cost-effective solution to meet the project specifications., • Prepare a complete engineering package of all required network diagrams, point-to-point wiring diagrams, control panel layouts, flow diagrams, valve and damper schedules, bill of material, and equipment submittals for approval by the client engineering firm and delivery to the installation team., • Provide technical support for the sales team, installation and commissioning team as well as technical support for the service division., • Visit sites as required for field engineering of building automation retrofits and upgrades or new construction quality control inspections. Requirements • Engineering degree (BSME or BSEE (EE preferred)) from an accredited college or university or a 2-year HVAC technical degree with 2+ years of experience in building automation or a relevant field., • Minimum of 2 years of experience required., • Knowledge and understanding of industrial HVAC applications, ability to read and understand MEP drawings and specifications., • Knowledge and understanding of electrical control systems to include: DDC controllers, instrumentation, sensors, transmitters, relays and actuators., • Understanding of flow dynamics to apply the appropriate measuring devices, control valve selection, and sizing., • Knowledge of industry-standard communication protocols; Bacnet/IP, BacNet MS/TP, Modbus TCP/IP, Modbus RTU and LON to provide system network diagrams and integration to 3rd party equipment and systems., • Proficiency in Microsoft Office required., • Microsoft Visio experience is preferred, AutoCAD or other BIM software is suitable., • Good verbal and written communication skills. Salary Range: $70,0000 -100,000 yrly DOE Benefits Albireo Energy is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Medical Insurance Dental Insurance Vision Insurance Basic Life Insurance Voluntary Life Insurance Short Term & Long Term Disability Paid Vacation Paid Sick Time Paid Holidays 401K with Company match Pre-Employment Requirements: All offers of employment are contingent upon successful completion of applicable pre-employment screenings, which may include a background check and drug screening, conducted in accordance with applicable federal, state, and local laws. Positions where driving is an essential function will also require a satisfactory Motor Vehicle Record (MVR). Work Authorization: Candidates must be authorized to work in the United States. Agency Submissions: Albireo Energy does not accept unsolicited candidate submissions from third-party recruiting agencies. Candidate ownership will only be recognized when submitted under an active, authorized agreement and through our official Applicant Tracking System. Submissions received without a prior agreement will be considered the property of Albireo Energy. Albireo Energy is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Job Description Tri-State Energy (TSE) is an energy efficiency consulting and implementation contracting firm with a 40-year history in customer service and energy cost saving delivery. TSE is a Minority Based Enterprise (MBE) for multiple states and has a major focus on providing support for DEI and Diversity initiatives. Regionally, TSE delivers Direct Install Programs, Engineered Solutions Programs, Energy Savings Improvement Programs, and Engineering Services for Municipal, Commercial and Industrial Clients. TSE is consistently recognized and awarded for being a small business champion that marries innovative technology with small company personalization and service. We are growing and looking to hire dedicated, industry-qualified candidates at all experience levels to grow with our company. Job Description We are seeking a dedicated and detail-oriented Energy Engineer to join our team in Woodbridge, New Jersey. The ideal candidate will be responsible for conducting energy audits, data collection and entry, feasibility studies, engineering assessments, and providing program-related support activities. This crucial role also involves conducting on-site inspections, design support, reviewing technical documents, and participating in construction management. The Energy Engineer will play a vital role in ensuring our projects realize their energy savings and meet all regulatory standards. Job Responsibilities • Perform onsite inspections, including detailed data collection and performance testing., • Prepare site investigation, preliminary design, and due diligence reports, including review of ordinances, utility service research, outside agency regulations, and onsite visits to establish comprehensive development guidelines., • Provide thorough education to end users regarding energy efficiency; field and answer related questions., • As a subject matter expert, be responsible for project coordination with the client, other consultants, contractors, and the project team to prepare a comprehensive site plan application., • Ensure technical aspects of work are performed following applicable regulations or project plans., • Investigate problems in construction or renovation projects., • Provide technical assistance to customers, contractors, and other stakeholders, including support with energy savings calculations and meeting program requirements., • Support and promote relationships with industry and solution partners to maximize project implementation, promote efficiency, and educate customers while sustaining a robust program pipeline., • Prepare written correspondence to outside agencies, clients, contractors, etc., • Perform site visits to verify the appropriate installation of recommended measures., • Monitor new products and technologies related to this industry for ongoing and future projects., • Stay informed about energy issues and industry trends through regular technical reading and participation in local and national professional organizations., • Provide thorough education to end users regarding energy efficiency, field and answer related questions., • Perform other duties as assigned. Qualifications Bachelor’s or master’s in engineering (Mechanical, Electrical, Energy). Other engineering disciplines will be considered. • Demonstrated interest in energy efficiency is must., • A minimum of 1 year of relevant engineering or fieldwork experience required; 2 to 5 years are preferred., • Must reside in New Jersey., • Demonstrated knowledge of Lighting and Lighting Controls, HVAC Equipment, Building Management System (BMS) and Building Envelope Components., • Demonstrated experience with energy codes and standards (IECC, ASHRAE, etc.) and Energy Star components., • Knowledge of ASHRAE level energy auditing, • Must be able to lead and perform on-site and virtual audits and customer site visits in various environments, including commercial, industrial, school, and government facilities., • Strong project management skills with the ability to set priorities, collect and document project requirements, successfully handle multiple projects simultaneously, and meet deadlines in a fast-paced environment., • Ability to maintain and operate personal and/or company vehicles with a valid driver’s license., • Must be willing and able to travel within the tri-state area; some overnight travel may be required., • Strong customer service capability focusing on proactively identifying customer needs and managing customer expectations., • Excellent written and verbal communication skills., • Self-starter who can work independently or within a team environment., • Exceptional organizational, time-management, and planning skills. Professional Skills • Familiar with the use of AutoCAD to assist in the production of site plan drawings., • Knowledge of eQuest, EnergyPlus or Open Studio software is a plus., • Proficient in using Microsoft 365 including Word, Excel, Outlook, and Project and other management software. AutoCAD full proficiency is required. Physical Abilities The physical demands described here represent those that an employee must meet to perform the essential functions of this job successfully. • While performing the duties of this job, the employee is occasionally required to stand; sit, walk, climb, balance, stoop, kneel, crouch or crawl; use hands to finger, grasp, or feel objects; reach with hands and arms; push or pull; talk and hear; use repetitive motions., • The employee is frequently required to lift and/or move up to 20 pounds and occasionally lift and/or move up to 25 pounds., • The employee must have visual acuity to perform activities such as preparing and analyzing data and figures, transcribing, viewing a computer terminal, and extensive reading and visual inspections of site plans. Work Environment While performing the duties of this job, the employee is subject to the following work environment: • The employee is subject to both inside and outside environmental conditions., • The employee is subject to hazards such as proximity to moving mechanical parts, moving vehicles, and electrical current. Equal Employment Opportunity (EEO) TSE is an equal-opportunity employer committed to diversity and inclusion in the workplace. TSE prohibits discrimination and harassment of any kind based on age, race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, age, marital status, gender, gender identity or expression, veteran status, or any other protected characteristic as outlined by federal, state, or local laws. TSE is a drug-free workplace. Screening TSE makes offers of employment contingent upon (1) successful completion of a routine background investigation and reference check, (2) drug testing, and (3) Act 34 Child Abuse clearance. Why work with us? • Medical, vision, dental insurance and more, including 401(k) and employer match.

Job DescriptionJob Description: The successful candidate will work as a Structural Engineer in the Outside Plant (OP) Engineering & Design Group within the Construction & Maintenance organization of the Electric T&D – Projects & Construction line of business utilizing a broad knowledge of business and engineering principles and practices. The successful candidate will be an experienced structural engineer with broad knowledge and experience in electric transmission and distribution design and construction. Perform detailed civil / structural engineering design and analysis and solve complex technical issues. The successful candidate will demonstrate an ability to lead and will coordinate and perform structural design, alterations, and repairs to produce construction drawings and calculations, as well as provide field construction support. Perform technical reviews on engineering design practices and provide engineering-related comments, as necessary. Oversee the work and provide technical guidance and direction to junior-level engineers. Job Responsibilities • Perform complex civil / structural calculations and analysis, • Prepare construction drawings, including steel, aluminum, concrete structures and foundations, • Design and detail steel transmission structures, including both lattice steel towers and tubular steel poles / structures, • Prepare existing structural and foundation reinforcement drawings, • Perform underground duct bank and manhole structural designJob Specific Qualifications Required Skills, Knowledge and Experience: • B.S. Degree in Structural / Civil Engineering, • Minimum of eight (8) years of experience in civil / structural engineering, including design and field / resident engineering on major civil / structural construction, alteration / renovation and modification projects, • Experience in performing complex civil / structural calculations and analysis, • Experience in preparing construction drawings, including steel, aluminum, concrete structures and foundations, • Experience in designing and detailing of steel transmission structures, including both lattice steel towers and tubular steel poles / structures, • Experience in preparing existing structural and foundation reinforcement drawings, • Knowledge of subsurface investigation and different geology conditions, • Experience in deep foundation design, including concrete caisson, driven pile, helical foundations, as well as steel vibratory caisson, • Experience in performing underground duct bank and manhole structural design, • Working knowledge of utility best practices, ASME, NESC, ACI, ASTM, and ASCE standards, • Proficient experience utilizing PLSPOLE, PLSTOWER, RISA and STAAD Pro for structural designs, • Proficient experience utilizing LPILE, GROUP, and FAD Tools for foundation designs, • Proficient experience utilizing Microsoft Office products, • Must be familiar with AutoCAD / MicroStation, • Must have New Jersey P.E. License, • Clear and concise writing and verbal communications skills, • As the job requires driving to Company locations and off-site assignments and events, must possess a valid U.S. driver’s license with a safe and satisfactory driving history Preferred / Desired Skills: • Advanced Technical or Engineering Degree, • Advanced technical training, • Familiar with preparing bottom up engineering estimates, • Familiar with NESC, PJM and Client loading criteria for transmission structures, • Knowledgeable in excavation stability, subgrade preparation, backfilling, thermal and electrical properties of soils, and dewateringMinimum Years of Experience, • 8 years of experience

Job Description Patuxent Engineering, LLC is seeking a Senior Structural Engineer for our NYC/NJ Office located in Metuchen,NJ. Ideal candidate should have relevant experience in concrete, steel, and foundation design, as well as Mechanical Methods. Patuxent Engineering, LLC provides construction engineering and support services in the high rise building industries and heavy construction industry. Our services include temporary structures, shores, SOE, Existing Structure Stability evaluations, as well as material and personnel vertical transportation solutions, worker access solutions, heavy equipment applications as well as means and methods. Preferred candidate PE or Pending PE(EIT). Please attach a cover letter, resume, and list your salary requirements when responding with contact information.

Job Description Job Title: Facility Engineer Location: South Plainfield, NJ Type: Direct-Hire Compensation: 90K to 140K/Annual Work Model: Onsite Hours: Monday through Friday (9AM to 5PM) Summary Responsible for facility operations, preventive maintenance, troubleshooting, utility monitoring, contractor coordination, and facility improvement projects. The Facility Engineer will work closely with local cross-functional teams, external service providers, and headquarters to minimize downtime, maintain compliance, and support production and facility expansion. Key Responsibilities Facility Operations & Maintenance • Perform and coordinate routine inspections, preventive maintenance, corrective maintenance, and troubleshooting for facility equipment and utility systems., • Maintain PM schedules, service records, inspection logs, and equipment history., • Monitor facility equipment and utility performance and address abnormal conditions before they impact production., • Coordinate maintenance activities, spare parts, and vendor services to minimize operational downtime. Critical Facility Systems Provide engineering and operational support for: • Cleanroom HVAC, temperature, humidity, pressure, and filtration systems;, • CDA, nitrogen, vacuum, DI/RO water, exhaust, and ventilation systems;, • Electrical distribution, UPS, emergency power, and fire/life-safety systems;, • Pumps, compressors, chillers, cooling systems, and other supporting mechanical utilities. Troubleshooting & Manufacturing Support • Respond to facility alarms, equipment failures, utility interruptions, and other production-impacting incidents., • Perform first-level troubleshooting, coordinate vendors for complex repairs, and support root-cause analysis and corrective actions., • Maintain facility conditions required for cleanroom and manufacturing operations., • Support cleanroom certification, environmental monitoring, equipment installation, hook-up, production line changes, and facility recovery activities. Facility Projects & Continuous Improvement • Support facility upgrades, renovations, utility expansion, energy-saving initiatives, and production expansion projects., • Review drawings, layouts, equipment specifications, scopes of work, and vendor quotations., • Coordinate contractors and service providers and track project schedules, action items, commissioning, and final handover., • Identify opportunities to improve facility reliability, safety, maintainability, and operating cost. Safety, Compliance & Contractor Management • Coordinate contractor access, work permits, site activities, and service quality., • Ensure maintenance and construction activities comply with company EHS requirements and applicable codes., • Support facility inspections, audits, corrective actions, and required documentation., • Maintain facility drawings, manuals, procedures, service reports, and compliance records. Reporting & Cross-Functional / Headquarters Coordination • Provide regular updates on facility status, maintenance activities, open issues, and project progress., • Coordinate with Production, Equipment Engineering, EHS, Quality, IT, and other internal functions., • Communicate and coordinate with headquarters in Mandarin and English regarding facility engineering, utility requirements, equipment installation, production expansion, project status, and technical issues., • Support vendor quotations, purchase requests, budgets, and service contract management as assigned. Qualifications Basic Requirements • Bachelor’s degree or above in Mechanical Engineering, Electrical Engineering, HVAC, Facility Engineering, Industrial Engineering, or a related field., • 3+ years of experience in facility engineering, industrial maintenance, cleanroom operations, manufacturing utilities, or related facility projects., • Working knowledge of HVAC, cleanroom systems, mechanical utilities, electrical distribution, and industrial facility systems., • Hands-on troubleshooting capability and ability to coordinate maintenance and repair activities., • Ability to read engineering drawings, P&IDs, equipment layouts, and utility schematics., • Strong communication, organization, follow-up, and problem-solving skills. Language Requirements • English proficiency and Mandarin proficiency are required Preferred Qualifications • Experience in optical module, photonics, semiconductor, electronics, or other high-tech manufacturing environments., • Experience with cleanroom facilities and CDA, nitrogen, vacuum, DI water, exhaust, HVAC, and electrical systems., • Experience with CMMS / preventive maintenance systems., • Experience supporting factory startup, production expansion, or facility upgrade projects., • Familiarity with OSHA, NFPA, building/fire codes, and manufacturing EHS requirements. System One, and its subsidiaries including Joulé and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national original, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. #M1 Ref: #562-Joule Staffing - Edison

Job Description At ANS, we’re not just a consulting engineering firm—we’re a team of trailblazers shaping the future of civil, structural, and geotechnical engineering. Recognized as one of the Best Places to Work and Top 10 Hottest Engineering Firms in the US by Zweig Reports, and featured in Inc. 5000’s Top 250 for our staggering 1,748% growth, we’re proud of what we’ve built and where we’re headed. We’re allergic to bureaucracy, thrive on innovation, and embrace data-driven decisions. If you love collaboration, creativity, and a fast-paced environment, we might just be your perfect match! Our team includes professionals licensed in over 20 states, with more than 70 years of collective experience. We pride ourselves on fostering a collaborative and supportive work environment that encourages growth and professional development. At ANS, you’ll enjoy paid vacation, sick, and personal time off; support for continuing education and community involvement; and comprehensive healthcare, vision, and dental benefits for eligible employees. We are seeking a motivated and driven Mid-level Geotechnical Engineer to join our team. ANS is a rapidly growing, emerging civil engineering firm focusing on civil, geotechnical, structural, and electrical engineering for renewable energy and infrastructure projects across the US. “MUST-HAVE” PROFILE OF THE SUCCESSFUL CANDIDATE INCLUDE: • BS in Civil Engineering, Geology, or related degree, • Valid US Drivers License, and a reliable means of transportation, • EIT or PE, • Flexibility and willingness to travel, on occasion, and for multiple consecutive days periods of times (est. up to one week at a time, once per month), • Strong communication and organizational skills, ability to find solutions to problems, and get-it-done attitude!, • Proficiency with Microsoft Office products, • Minimum 5 years of experience in consulting engineering, or related field, • Experience in preparing Engineering Reports with strong technical writing skills, • Experience with working within and leading team environments, • Working knowledge of geotechnical principles and engineering design“NICE-TO-HAVE” SKILLS FOR THE SUCCESSFUL CANDIDATE MAY INCLUDE:, • Technical licensure track including EIT, GIT, PE, PG, PMP, or similar., • Experience in planning, implementing, overseeing, and managing subsurface investigation programs, • Prior experience with geotechnical investigations, including soil borings, rock coring, and material testing, • Experience with design of foundations, support of excavation systems, and preparing reports, • Prior experience with geotechnical software (gINT, GeoStudio, LPILE, ALLPILE, DeepEx, etc.), • Familiarity with renewable energy sectorTHE CHALLENGES THAT LIE AHEAD INCLUDE:, • Working alongside a team of high-performing engineering and technical professionals, • Performing geotechnical field investigations, construction observation, and engineering evaluation and technical analysis, • Preparing technical reports and summaries, and interfacing directly with coworkers, clients, and stakeholders to communicate findings and recommendations, • Completing technical analyses, including foundation design, support of excavation, and other engineering evaluations, • Actively participating in your career growth, including the opportunity to join elective continuing education courses, being involved in community and professional societies, and managing projects and experiences that stretch you outside of your comfort zone to grow you as a professional. ANS Offers the following benefits to full-time employees: 401(k) matching Dental insurance Health insurance Life insurance Unlimited Paid time off Professional development assistance Vision insurance If you’re ready to work on impactful projects that shape the renewable energy future, ANS is the place for you. Your expertise will make a difference- help us deliver engineering solutions that matter. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Position Overview Harris Energy Solutions, LLC (HES) is a nationwide Energy Consulting Services firm. HES offers a full suite of consulting services, including Building Energy Modeling, Renewable Energy Consulting, Master Planning, Energy Audit, Building Commissioning, Measurement and Verification, and Building Retro-Commissioning. We pride ourselves on the work we perform and the services we provide. HES is hiring an Energy Engineer specializing in Building Commissioning to join our team. The Energy Engineer (Commissioning) will support and execute new construction commissioning (Cx) and retro-commissioning (RCx) projects across a portfolio of commercial, institutional, and multi-family buildings. This role focuses on verifying that building systems are designed, installed, tested, and operated to meet the Owner's Project Requirements and applicable code, certification, and performance criteria. Responsibilities • Develop Commissioning Documentation: Author commissioning plans, Owner's Project Requirements (OPR) summaries, Basis of Design (BOD) reviews, issues logs, and final commissioning reports., • Perform Design and Submittal Reviews: Review drawings, specifications, sequences of operation, and contractor submittals to identify deficiencies, design intent gaps, and commissioning impact items., • Create Pre-Functional and Functional Checklists: Develop equipment-specific Pre-Functional Checklists (PFCs) and Functional Performance Test (FPT) scripts for HVAC, plumbing, electrical, controls, and life safety systems., • Conduct Site Visits and Construction Observation: Perform installation verification site visits, document open issues, and coordinate with general contractors, mechanical/electrical contractors, controls vendors, and TAB agents., • Execute Functional Performance Testing: Lead and witness FPTs of air-side, water-side, BAS, lighting controls, and emergency power systems; verify sequences of operation and proper system response., • Support Retro-Commissioning Studies: Conduct onsite performance testing of existing building systems, identify Retro-Commissioning Measures, and quantify low- and no-cost operational savings., • Develop Systems Manuals and Training: Compile systems manuals and assist with O&M training to support owner handoff., • Support Certification and Compliance: Support LEED Fundamental and Enhanced Commissioning, ASHRAE Guideline 0/1.1/1.5, and project-specific certification requirements. Requirements • Bachelor's in Engineering (Mechanical, Electrical, or Facilities), • 1-3 years of experience in commissioning, MEP design, construction, or energy engineering, including at least one internship, co-op, or full-time role, • Working understanding of HVAC equipment (AHUs, chillers, boilers, VRF, VAV, terminal units), BAS sequences of operation, and basic electrical systems, • Familiarity with construction documents, specifications (CSI MasterFormat), and submittal review, • Exposure to LEED commissioning requirements and/or ASHRAE Guideline 0 preferred, • Comfortable working onsite in active construction environments (PPE required), • Proficient in Microsoft Office and PDF markup tools (Bluebeam, Adobe), • Experience with large commercial and multi-family buildings preferred but not necessary, • EIT, CxA, BCxP, or LEED AP credential preferred (or willingness to obtain), • Travel throughout the United States as required by project workload Personal Qualifications • Strong analytical, writing, and presentation skills, • Passionate about mitigating climate change, • Collaborative and a strong team player, • Self-motivated with the ability to multitask and pay attention to detail, • Ability to work independently and within a team environment, • Enthusiasm to learn and grow as a professional Applicants must be legally authorized to work in the U.S. without the need for current or future employer-sponsored work authorization Job Type: Full-time Pay: $70,000.00 - $82,000.00 per year Benefits • 401(k) (Traditional and Roth options), • 401(k) Safe Harbor, • Medical Insurance, • Dental Insurance, • Vision Insurance, • HSA option, • Paid Time Off, • Paid Holidays, • Profit Share Plan, • Company Covered Disability Insurance (LTD, STD), • Company Covered Life Insurance, • Company Covered Financial Advising Schedule • 8-hour shift, • Hybrid with 3 office days Work Location: Piscataway, NJ & Whitestone, NY (Hybrid - T/W/Th in office) EEO Statement: All qualified applicants will receive consideration for employment without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, or sex.

Job DescriptionDescriptionArtheon is seeking a skilled and motivated Professional Stormwater Engineer to join our team in East Brunswick or Neptune, NJ. This position offers an opportunity to work on diverse projects in land development, infrastructure design, and municipal engineering. The ideal candidate will bring technical expertise, creativity, and a collaborative spirit to deliver high-quality design solutions. About ArtheonArtheon is a trusted engineering and consulting firm offering services that rival large organizations while maintaining the personalized client relationships of a boutique firm. With expertise spanning civil/site engineering, environmental permitting, transportation infrastructure, construction management, and advanced surveying technologies, we are committed to delivering high-quality, timely solutions to local, state, and federal clients. ResponsibilitiesDesign and Drafting: • Develop civil engineering designs, including site layouts, grading, drainage and utilities using CAD software (e.g., AutoCAD Civil 3D).Permitting and Compliance:, • Prepare and submit permit applications to local, state, and federal agencies, ensuring compliance with applicable regulations and standardsProject Collaboration:, • Work closely with project managers, surveyors, and other engineering disciplines to deliver comprehensive solutions tailored to client needs.Technical Reports:, • Create engineering reports, feasibility studies, and calculations to support project design and decision-making. QualificationsExperience: • 5+ years of experience in civil engineering design, preferably in land development or municipal projects.Technical Proficiency:, • Proficiency in AutoCAD Civil 3D, HydroCAD, HEC-RAS and other relevant engineering software; knowledge of stormwater management software is a plusLicensing:, • Professional Engineer (PE) license is requiredSkills:, • Strong analytical, problem-solving, and communication skills with the ability to work effectively in a team-oriented environment. BenefitsThe base salary range for this role is indicated in the posting. This range reflects the company’s good faith estimate of the compensation for this position at the time of posting. Final compensation will be determined based on factors such as experience, skills, qualifications, internal equity, and geographic location. Artheon offers a competitive compensation package including medical, prescription, dental and vision coverage, 401(k) retirement plan with employer match, educational assistance program and paid time off/parental leave.

Job Description Position Overview: GRA Design Studio is seeking a skilled and motivated Mechanical Engineer to join our dynamic and engaging team, supporting major national franchise brands such as Wingstop, Playa Bowls, Dave's Hot Chicken, Dunkin', Wonder, Bubbakoo's Burritos, Jersey Mike's Subs, and more. As a key player in our process-driven and creative engineering team, the ideal candidate will have a strong background in mechanical engineering with a focus on HVAC design. The Mechanical Engineer will be responsible for performing HVAC calculations, generating specifications, and sizing plumbing and gas piping systems. Additionally, the role involves creating detailed mechanical layouts, coordinating with other disciplines, and ensuring that designs are executed to the highest standards. This position requires proficiency in AutoCAD and/or Revit and strong project management skills. At GRA Design Studios, we pride ourselves on our end-to-end product line offering, national reach, and commitment to transparency and external communication. We are a disruptive force in the industry, known for our engaging and transparent approach to every project. Job Description: As a Mechanical, Electrical, Plumbing Engineer at GRA Design Studios, you will be responsible for the following: • HVAC Design: Perform load calculations, develop HVAC system layouts, and be responsible for HVAC material to meet project goals. You will also develop and maintain project schedules to ensure timely delivery., • Plumbing and Gas Piping: Size and design plumbing and gas piping systems, ensuring all layouts are accurate and code-compliant. Collaborate with other disciplines to seamlessly integrate these systems into the overall building design., • Layout Creation: Develop detailed mechanical, electrical and plumbing layouts using AutoCAD and/or Revit, ensuring accuracy, clarity, and compliance with standards., • Project Management: Oversee engineering projects from conception through completion, ensuring timelines, budgets, and quality standards are met. Maintain transparent communication with clients and stakeholders, providing regular updates and detailed reporting., • Documentation and Quality Assurance: Prepare detailed engineering reports, specifications, and documentation. Conduct pre and post construction site visits and inspections to verify that installations meet design intent and participate in the commissioning process., • Professional Development: Stay current with industry trends, tools, and technologies. Attend training sessions, workshops, and seminars to maintain professional certifications and licenses, contributing innovative ideas to improve processes. To excel in this role, you should have: • Education: A Bachelor’s degree in Mechanical or Electrical Engineering or a closely related field from a 4-year accredited college or university., • Experience: Experience: A minimum of 3–5 years of engineering experience, with proficiency in AutoCAD and/or Revit. Experience performing HVAC calculations, designing HVAC systems, and generating mechanical layouts is essential. Experience sizing plumbing and gas piping systems is also required. Prior fieldwork experience, including site surveys, construction observations, and coordination with contractors, is a plus., • Certification: Engineer-In-Training (EIT) certification is preferred., • Skills: Strong project management, problem-solving abilities, attention to detail, and excellent communication skills, both written and verbal. Benefits: • Health, dental, & vision insurance, • Paid time off & Holidays, • Career growth opportunities & professional development assistance (Amber Books subscription, additional PTO for ARE prep & testing), • Retirement plan (401K with up to 3% match), • Collaborative team dynamic, • Extracurricular activities (sports clubs, bowling leagues, etc) & company events, • Wellness activities and benefit offerings, • Flex scheduling, • Hybrid work environment

Job Description Senior Transmission Line Engineer Location: Remote (U.S.) Employment Type: Full-Time The Opportunity We are seeking an experienced Transmission Line Engineering Leader to play a key role in the continued growth and development of the transmission practice. This is a senior leadership opportunity for someone who brings strong technical credibility in transmission line engineering but is equally motivated by leading people, developing teams, owning client relationships, and driving successful project delivery. The successful candidate will serve as a senior technical and project leader, providing direction across transmission line projects while mentoring engineers and helping strengthen the capabilities of the broader team. What You'll Do • Lead transmission line engineering projects and project teams from initial planning through design and construction support., • Provide technical leadership and direction across overhead transmission line design, including route development, line and structure spotting, structure analysis/design, foundations, specifications, and constructability., • Lead, mentor, and develop engineers, providing technical guidance, design oversight, and support for their continued professional growth., • Serve as a senior technical resource for the transmission group, helping establish engineering best practices and maintaining high standards of quality., • Build and maintain strong client relationships, serving as a trusted technical partner and senior point of contact throughout project delivery., • Work closely with project management and company leadership to understand client needs, resolve challenges, and identify opportunities for additional work., • Take ownership of project execution, including scope, schedule, technical quality, resource planning, and coordination across disciplines., • Lead technical reviews and provide oversight of engineering calculations, design packages, specifications, drawings, and deliverables., • Support the continued growth and development of the transmission engineering team, including mentoring, knowledge sharing, and developing technical capabilities., • Collaborate across transmission, substation, renewables, and other power infrastructure disciplines to deliver integrated solutions., • Help identify opportunities to improve processes, engineering standards, and project execution as the business continues to grow. What We're Looking For • 8+ years of progressive experience in overhead transmission line engineering., • Professional Engineer (PE) license., • Strong experience with PLS-CADD and transmission line design., • Thorough understanding of NESC requirements and applicable transmission engineering standards., • Demonstrated experience leading transmission line projects and engineering teams., • Ability to mentor and provide technical direction to junior and mid-level engineers., • Strong client-facing and communication skills, with the ability to represent the transmission group at a senior level., • Experience managing multiple priorities while maintaining technical quality and project delivery., • Strong understanding of transmission line engineering from conceptual development through detailed design and construction support., • A collaborative leadership style and genuine interest in building people, teams, and client relationships. Ideal Profile This role would be particularly well suited to a Senior/Lead Transmission Line Engineer, Technical Lead, Engineering Manager, or emerging Discipline Leader who wants to have a greater impact on the direction and growth of a transmission group. We're looking for someone who can still roll up their sleeves technically when needed, but whose value goes beyond producing calculations and designs. They should be able to lead the team, develop engineers, provide technical authority, engage directly with clients, and help grow the practice. Why This Opportunity This is an opportunity to step into a position with real influence over the future of the transmission team. Rather than being limited to individual project execution, this person will have the ability to shape how projects are delivered, mentor the next generation of engineers, strengthen client relationships, and contribute to the overall growth of the group. \nCompany Description LVI Associates exists to enable exceptional careers around the world; we connect exceptional talent, with exceptional opportunities. We believe that every professional should benefit from the advice of a trusted partner throughout their career. We provide that partnership to mid to senior level professionals within the Energy, Environmental & Infrastructure spaces through our network of micro-specialist consultants. Each team within LVI Associates focuses on a specialist area of Energy & Infrastructure. I specialise in sourcing and placing senior level candidates within the bridges and highway construction spaces. Make LVI Associates your career partner; ensure your career journey is exceptional. LVI Associates exists to enable exceptional careers around the world; we connect exceptional talent, with exceptional opportunities.\r\n\r\nWe believe that every professional should benefit from the advice of a trusted partner throughout their career.\r\n\r\nWe provide that partnership to mid to senior level professionals within the Energy, Environmental & Infrastructure spaces through our network of micro-specialist consultants.\r\n\r\nEach team within LVI Associates focuses on a specialist area of Energy & Infrastructure. I specialise in sourcing and placing senior level candidates within the bridges and highway construction spaces. \r\n\r\nMake LVI Associates your career partner; ensure your career journey is exceptional.

Job Description Job Title: Senior Mechanical Engineer - Data Center Facilities Job Type: Full-time Job Location: On-Site Edison, NJ (this is not a remote or hybrid job). Company Information: Growing NJ Data Center Information Technology/Design/Engineer Firm that delivers an industry-leading portfolio of consulting, design/build, and commissioning services for organizations seeking to plan and deploy an agile IT infrastructure. Mobile. Social. Big Data. Analytics. Artificial Intelligence/High Performance Compute included. These are the business trends we help clients address. Description of Role: We are seeking a skilled Sr. Mechanical Engineer PE with 7+ year design experience for data center/mission critical project experience working with a team on ongoing and new projects. Individuals must have clear written and oral communication skills, detail oriented and up-to-speed software systems utilized in this field. Working alone or with additional team members with the ability to multi task and work successfully under pressure to achieve client deliverables. Knowledge of Cooling Towers, Glycol Systems, Air Cooling Systems, In Row Cooling, Rear Door Heat Exchange, BMS Control, Plumbing, Fire Protection, AutoCAD. Tasks include but not limited to: • · Professional Engineering design of the mechanical engineering discipline, including HVAC, Plumbing and Fire Suppression., • · Development of design solutions for discipline, using sound engineering principles and practices., • · Providing calculations and related documentation for designs developed and implemented and maintenance of documentation for future reference., • · Evaluation of existing facilities and systems respective to the as-built conditions which affect the design., • · Providing written reports documenting design criteria and other aspects of the design., • · Suggesting alternate solutions based upon life cycle and/or first cost basis with associated budget impacts., • · Coordination of consultant and in-house design and CADD personnel to accurately document the design intent on the construction and bid documents., • · Sealing of permit documents as Engineer of Record. (The company will furnish E & O and liability insurance). Company Insurance coverage will not cover any design for an outside project not related to the Company., • · Other responsibilities normally performed in the execution of mechanical design on a professional level, according to standard industry practices., • · Travel to project job sites will be expected. Skill Requirements: Bachelor’s degree in Mechanical Engineering and Licensed/Registered. Have the ability to interact with the comprehensive multi discipline team on consulting reports, design projects, and construction/commissioning projects. Work Schedule: • This is a full-time job position. In office, not remote or virtual., • Normal business hours are Monday thru Friday 8-5pm., • This role requires project related travel. Benefits: • · Salary is based on skill and experience., • · Comprehensive Benefits which include Medical, Dental, Vision, Life Insurance and paid time off., • · 401K Match to $3,500, • · Performance Awards, • · Longevity Plan, • · Year End Bonuses Subject to Corporate Profitability\nCompany Description BRUNS-PAK is a New Jersey based data center engineering firm that helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure. In an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices, we deliver robust design/build solutions for cloud, colo, datacenter, and edge environments. We engineer solutions that balance ultra-reliability with Quality of Service (QoS) demands, storage challenges, environmental responsibility, energy efficiency, capital expenditure (capex) control, and operational expenditure (OPEX) options. With a legacy of over 6,000 successful data center projects across the United States, Canada, and Europe, BRUNS-PAK’s engineering expertise spans cloud, colocation, on-premises, edge, and hybrid infrastructures. BRUNS-PAK is a New Jersey based data center engineering firm that helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure. In an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices, we deliver robust design/build solutions for cloud, colo, datacenter, and edge environments.\r\n\r\nWe engineer solutions that balance ultra-reliability with Quality of Service (QoS) demands, storage challenges, environmental responsibility, energy efficiency, capital expenditure (capex) control, and operational expenditure (OPEX) options. With a legacy of over 6,000 successful data center projects across the United States, Canada, and Europe, BRUNS-PAK’s engineering expertise spans cloud, colocation, on-premises, edge, and hybrid infrastructures.

Job Description Albireo Energy is seeking the talents of a dedicated systems designer to produce highly detailed and technical installation diagrams for data center automation and EPMS systems. These systems typically involve mechanical cooling, electrical metering, automation P&ID, communication, low voltage connection and networking diagrams. Additionally, conceptual drawings and diagrams are required in support of our solutions architecture and sales team. This position is responsible for assisting the central engineering team in the design and implementation of strategic projects globally. An individual in this position will be expected to perform additional job-related responsibilities and duties throughout the project as assigned and or as necessary. In addition to the responsibilities below, the Automation Engineer works under the Hardware Engineering Manager, performing routine and complex technical duties in project design, implementation, and management of complex automation systems and technology integration to meet the intent of the project requirements. This includes providing detailed information and submittals to communicate design and operation to customers, consultants, subcontractors and the field installation team. Employees at this level will be expected to be self-starters capable of prioritizing the tasks associated with the project documentation development while maintaining the budgeted time allocated for the project. Job Responsibilities: • Read and interpret customer specification packages to determine design factors such as size, shape, construction materials, functionality, etc., • Work with the engineering team to create Mechanical and Electrical System models., • Develop layouts, detailed design drawings, and diagrams for Mechanical and Electrical Systems (consisting of enclosures, conduit, cabling, onelines, building layouts, etc.)., • Draft detailed multi-view drawings of parts, sub-assemblies, and installation details., • Assure the accuracy and completeness of all drawings, BOMs, files, engineering records, and tasks of assigned projects., • Ensure all purchased parts are correctly modeled for efficient assembly of electrical/mechanical equipment., • Coordinate equipment manufacturer submittals for connection details and compatibility with design requirements, • Analyze designs and systems for compliance to applicable standards (i.e. OSHA, CE or customer specific), • Review drawings for accuracy, material selection, proper machining techniques, finishes, hardness, etc., • Communicates all requested design changes to their Engineering Group Leader., • Adhere to all health and safety rules and procedures., • Adhere to all procedures pertaining to the job responsibilities., • Responsible for communicating progress on tasks to project engineer or manager., • Will periodically supervise the system design effort on a project level delegating tasks to a team of people., • Organize documentation, including quotes, drawing registers, correspondence, requisitions, drawings, schedules, etc. on projects you are supervising., • Review electrical requirements with respect to input and output devises with electrical designers., • Review machine operations and machine sequences with programmers., • Assist the fabricators, machinists, toolmaker and electricians in the debug, integration resolving problems and completion of systems., • Determines tools, fixtures and equipment to be used in fabrication and assembly of mechanical components and complete assemblies., • Select appropriate purchase component for system assemblies and create requisitions with appropriate delivery dates. Requirements Skills: • A working knowledge of common mechanical and electrical systems in buildings., • A working knowledge of automation(P&ID) and monitoring systems., • Must have a thorough knowledge of drafting principles., • Must be proficient in AutoCAD and Solid Works., • Must be capable of designing systems from sketches or verbal concepts., • Must be capable of working as part of a team in a multilocation, remote environment., • Experience working with virtual collaboration systems such at Microsoft Teams., • A thorough knowledge of the use of electro-mechanical actuation and sensing devices., • A thorough knowledge of the use of electrical devices (i.e. switches, sensors, transmitters, relays, etc.)., • Must be capable of giving and taking direction., • Must demonstrate a strong ability to conceptualize and create solutions for complex design requirements., • Must have strong written and oral communication abilities., • Able to independently complete all specific responsibilities with minimal supervision., • Experience working with low voltage installation practices., • Experience with Revit or similar BIM modelling system., • Experience with physical network devices used in operation technology., • Experience managing others., • Experience with client facing interactions and participating in solutions development. Required Qualifications: • Autodesk Inventor (2 yrs or equivalent combination of training and experience), • Ignition experience, • Drafting and drawing standards development knowledge, • Electrical / Mechanical aptitude, • Strong communication skills, verbal and written, • Microsoft Office proficient, • High attention to detail, • Ability to manage multiple tasks and priorities, • Up to 50% travel Preferred Qualifications: • BS in Mechanical/Electrical Technology or Engineering degree, • Autodesk AutoCAD Mechanical, • Autodesk AutoCAD Electrical, • Mechanical/Electrical System Design experience with expertise within an automation design environment (10 yrs of experience in designs utilizing pneumatics, valves, servos, mechanisms, etc). Pay: $100-120k/yr DOE Benefits Medical Insurance Dental Insurance Vision Insurance Basic Life Insurance Voluntary Life Insurance Short Term & Long Term Disability Paid Vacation Paid Sick Time Paid Holidays 401K with Company match Pre-Employment Requirements: All offers of employment are contingent upon successful completion of applicable pre-employment screenings, which may include a background check and drug screening, conducted in accordance with applicable federal, state, and local laws. Positions where driving is an essential function will also require a satisfactory Motor Vehicle Record (MVR). Work Authorization: Candidates must be authorized to work in the United States. Agency Submissions: Albireo Energy does not accept unsolicited candidate submissions from third-party recruiting agencies. Candidate ownership will only be recognized when submitted under an active, authorized agreement and through our official Applicant Tracking System. Submissions received without a prior agreement will be considered the property of Albireo Energy. Albireo Energy is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Job Description Work Setting: Hybrid Hazen and Sawyer is seeking Principal Structural Engineer for our New York, New Jersey, Connecticut, or Massachusetts offices. As part of our Structural team. The position will work on a wide range of projects to include planning, design, permitting, and construction of structures in the ‘water space’ (i.e. drinking water, wastewater, water resources, conveyance, canals and ports). Client development, project management, technical leadership and staff mentoring opportunities will be possible for the selected individual across Hazen’s Northeast and Midwest businesses. Primary focus will be projects in NY, NJ and CT. Fieldwork and site visits from planning through construction may be required with occasional travel. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,400 employees in 90+ offices throughout the United States, Latin America, Canada, and the UK., • A flexible hybrid work schedule supports today's busy professionals Key Responsibilities: • Project engineering/management, mentoring and developing junior staff, performing site inspections and assessments of existing infrastructure. ·, • Perform assessment, design, and construction tasks for water and wastewater treatment projects., • Produce design calculations, technical reports, permitting, detailed design and engineering plans/specifications for environmental structures such as industrial buildings, pump stations, process basins, storage facilities and treatment facilities., • Participate in construction tasks for similar projects including submittal review, responding to RFI’s, site inspections and clarifications during construction, • Technical Engineering Leadership., • Staff Development. Required Qualifications: • BS degree in Civil Engineering (with a Structural Concentration preferred) or Structural Engineering, • PE license (or ability to obtain within 6 months), • 5-12 years of related experience, • Experience in design and construction of structural steel, reinforced concrete, reinforced masonry, and aluminum is required as well as knowledge of applicable building codes, design standards including ACI, AISC, ASCE, and structural analysis and design software., • Candidates must be effective communicators and be able to successfully work in a multi-discipline team environment Preferred Qualifications: • Advanced degree (Master’s or Doctorate) in Civil Engineering (with a Structural Concentration) or Structural Engineering What We Offer: • Comprehensive health benefits (medical, dental, vision, and prescription plans)., • Pre-tax flexible spending plans for medical, dependent care, and transportation., • Short- and long-term disability, plus employer-paid life insurance., • Paid holidays, floating holidays, and paid time off (PTO)., • Employer-contributed 401(k) plan and additional financial planning support., • Professional development opportunities, including tuition reimbursement, in-house training, and incentives for professional licensure and professional organization memberships., • Starting pay range for this position depends on skills, experience, education, and geographical location. #li-hybrid

Job Description Join Our Growing Team CSA provides the ideal place for you to develop or start your career in a fast-paced, diverse environment. At CSA Group, one of our guiding principles is to treat people with respect, and we appreciate diversity in their backgrounds, experiences and opinions. If you think you have what it takes to be an industry leader, send us your resume. Our Success For more than 65 years, CSA Group has contributed to developing stronger, more resilient facility and infrastructure solutions. Our experience brings plenty of opportunities for you to expand your skill set, challenge yourself, and make an impact. Social Commitments One of CSA Group’s most important Guiding Principles is our commitment to contribute to the industries we serve and the communities we live in. This translates into active involvement in a variety of activities and organizations, which provide many opportunities for education and growth for our employees. Responsibilities Priorities can often change in a fast-paced environment like ours, so this role includes, but is not limited to, the following responsibilities: • Support major projects involving the planning, design, and startup of water and wastewater treatment systems with a focus on process, pump stations, large diameter pipelines, biosolids, and odor control systems., • Demonstrate technical excellence in the performance of project assignments including planning, design and preparation of bid documents, project management, regulatory coordination, and construction services., • Manage multiple technical assignments while participating in or leading project teams to complete projects to exceed client expectations for approach, scope, budget and schedule., • Assemble and present written recommendations on technical matters and prepare reports., • Inspect, test and evaluate collection, conveyance, distribution, and treatment systems and processes., • Develop and maintain client relationships, understanding their current and future needs to ensure expectations are met., • Participate in business development pursuits, identifying opportunities and preparing proposals to meet the office's growth goals. Requirements Essential Skills and Experience: • Bachelor’s Degree in Civil, Environmental, Chemical, Mechanical, or Civil Engineering, • 5-10 years of experience in water and wastewater consulting field, • Registration as Professional Engineer ability to obtain within 18 months of hire, • Excellent oral and written communication skills, • Prior experience in water and wastewater pipeline, pump station, and treatment facility design, rehabilitation, and construction, • Prior experience in process equipment selection, design and startup for pump stations, treatment plants and biosolids processing facilities., • Ability to prepare reports; evaluate pipelines, pump stations and/or treatment plants; and prepare design documents, • Familiar with environmental rules and regulations in the water and wastewater field, • Proficiency with AutoCAD and computer modeling for water systems, open channel flow, and sanitary/storm water systems and other computer applications, • Excellent oral and written communication skills, • Curiosity and interest in continuous learning in AI and comfort experimenting and iterating quickly; uses data to validate ideas and measure impact., • Commitment to ethical and responsible AI adoption, including privacy-by-design and safe use of tools.\nCompany Description Join Our Growing Team CSA provides the ideal place for you to develop or start your career in a fast-paced, diverse environment. At CSA Group, one of our guiding principles is to treat people with respect, and we appreciate diversity in their backgrounds, experiences and opinions. If you think you have what it takes to be an industry leader, send us your resume. Our Success For more than 65 years, CSA Group has contributed to developing stronger, more resilient facility and infrastructure solutions. Our experience brings plenty of opportunities for you to expand your skill set, challenge yourself, and make an impact. Social Commitments One of CSA Group’s most important Guiding Principles is our commitment to contribute to the industries we serve and the communities we live in. This translates into active involvement in a variety of activities and organizations, which provide many opportunities for education and growth for our employees. Join Our Growing Team\r\n\r\nCSA provides the ideal place for you to develop or start your career in a fast-paced, diverse environment. At CSA Group, one of our guiding principles is to treat people with respect, and we appreciate diversity in their backgrounds, experiences and opinions. If you think you have what it takes to be an industry leader, send us your resume.\r\n\r\n\r\n\r\nOur Success\r\n\r\nFor more than 65 years, CSA Group has contributed to developing stronger, more resilient facility and infrastructure solutions. Our experience brings plenty of opportunities for you to expand your skill set, challenge yourself, and make an impact.\r\n\r\n\r\n\r\nSocial Commitments\r\n\r\nOne of CSA Group’s most important Guiding Principles is our commitment to contribute to the industries we serve and the communities we live in. This translates into active involvement in a variety of activities and organizations, which provide many opportunities for education and growth for our employees.

Job DescriptionDescriptionArtheon is seeking an experienced Office Engineer to join our team working on projects located in the State of New Jersey for various state and regional agencies. About ArtheonArtheon is a trusted engineering and consulting firm offering services that rival large organizations while maintaining the personalized client relationships of a boutique firm. With expertise spanning civil/site engineering, environmental permitting, transportation infrastructure, construction management, and advanced surveying technologies, we are committed to delivering high-quality, timely solutions to local, state, and federal clients. Responsibilities • Support the Resident Engineer and construction project supervision team with day-to-day project administration and documentation, • Maintain project records, correspondence, reports, logs, and other construction documentation in accordance with applicable agency and contract requirements, • Assist with the review, tracking, and processing of RFIs, submittals, shop drawings, and contractor documentation, • Prepare and maintain daily, weekly, and monthly project reports and records, • Coordinate and maintain documentation required by state and municipal transportation and infrastructure agencies, • Track project correspondence, action items, submissions, approvals, and outstanding documentation, • Support tracking of construction progress, quantities, schedules, and project milestones, • Coordinate with Resident Engineers, inspectors, contractors, consultants, client representatives, and other project stakeholders, • Assist with meeting preparation, meeting minutes, project correspondence, and follow-up items, • Support change orders, payment documentation, project closeout, and other contract administration activities, • Perform additional Office Engineer duties as needed to support the Resident Engineer and project team Qualifications • Bachelor’s degree in Civil Engineering, Construction Management, Engineering Management, or a related engineering/construction discipline required; Master’s degree preferred, • Minimum 2–5 years of relevant experience in office engineering, construction engineering, construction management, field engineering, or construction inspection, • Experience supporting projects for NJDOT or NJTA., • Experience with transportation, roadway, infrastructure, or other public-sector construction projects preferred, • Ability to read and interpret construction drawings, plans, specifications, and contract documents, • Experience working with RFIs, submittals, project reports, correspondence, and construction records, • Familiarity with public-agency construction documentation, reporting, and contract administration requirements, • Strong written, verbal, and interpersonal communication skills, • Strong organizational skills, attention to detail, and ability to manage multiple priorities and deadlines, • Proficiency with Microsoft Office, particularly Excel, Word, and Outlook; experience with Bluebeam, Primavera P6, Procore, or similar construction management tools preferred, • Ability and willingness to work on-site at project locations throughout New York City BenefitsThe base salary range for this role is indicated in the posting. This range reflects the company’s good faith estimate of the compensation for this position at the time of posting. Final compensation will be determined based on factors such as experience, skills, qualifications, internal equity, and geographic location. Artheon offers a competitive compensation package including medical, prescription, dental and vision coverage, 401(k) retirement plan with employer match, educational assistance program and paid time off/parental leave.

Job Description Who We Are Binsky is a leader in world-class mechanical construction. Dedicated service to our clients has elevated us as the premier mechanical contractor for projects of all sizes and scopes. Innovation is the key at Binsky and along with our creative processes, we are always on the cutting edge of technology. Recognized as one of the most respected mechanical contractors in New Jersey and Pennsylvania, Binsky delivers high quality workmanship on projects from large traditional construction to commercial HVAC, plumbing, and service. Building incredible projects requires exceptional people. We are seeking a Estimating & Sales Engineer for our Binsky MCaP Division. Why We Need You! We need talented individuals, like you, who care about the company and our customers, and can help us continue to grow and succeed! The Role The Estimating & Sales Engineer is a technically skilled, client-focused professional who plays a key role in both developing mechanical system bids and supporting business growth. This role bridges estimating and sales by working closely with clients to understand project needs, shape proposals, and develop competitive pricing strategies. Far from a back-office position, this role involves direct client engagement, strategic input, and a strong focus on delivering accurate, well-grounded estimates that support profitability and long-term relationships. Accountabilities • Attend client meetings, pre-bid walkthroughs, and presentations alongside business development and sales leadership., • Understand customer priorities beyond cost—such as timelines, logistics, and relationships., • Translate technical solutions into clear, compelling value propositions., • Build and maintain strong relationships with general contractors, engineers, and project owners., • Demonstrate a solid understanding of HVAC, piping, and plumbing systems., • Prepare and deliver complete, accurate, and timely estimates that reflect all project requirements., • Submit final bids that align with company sales objectives and profit targets. Qualifications: Skills • Proficient with estimating software and other construction-related technologies., • Strong ability to prioritize tasks, set goals, and manage multiple deadlines under pressure., • Skilled in reading and interpreting architectural, structural, and mechanical plans and specifications., • Familiar with a wide range of plumbing, HVAC, and process systems and terminology., • Solid foundation in plumbing and mechanical theory, including applicable codes and standards., • Strong math, analytical, organizational, verbal, and written communication skills., • Broad knowledge of commercial and industrial mechanical systems, including applications in data centers, hospitals, and R&D facilities., • Effective communicator with the ability to convey technical details clearly to clients and internal teams. Education and Experience • Bachelor’s degree in mechanical engineering a plus; solid experience in commercial plumbing and HVAC estimating required., • Experience with early design phase projects, negotiated work, GMP pricing a plus., • CRM experience, sales or client relationship management experience a plus. Physical Requirements Ability to sit for long periods of time, walk, stand, bend, stoop, use hands and fingers & lifting <40 pounds. What We Offer Binsky values the well-being of its employees and offers competitive wages and a range of benefits: • Medical, Dental and Vision benefits, • 401k with company contribution, • 8 paid holidays per year, • Paid Time Off Binsky is an EOE. This job description does not necessarily represent an exhaustive list of responsibilities, skills, duties, requirements, efforts or working conditions associated with the job. While this is intended to be an accurate reflection of the job, management reserves the right to revise the job or require that other different tasks are performed as circumstances change.

Job Description This job is posted on behalf of K44 Consulting LLC by Top Echelon. Our client, a major international wholesaler/manufacture in the Building Materials Industry is adding a Director of Product Marketing position to their team. The primary focus of this role will be Product Marketing and Innovation. The Director will work closely with Sales, Engineering, and Operations to identify market opportunities, help steer the innovation pipeline, and successfully bring new products from concept through commercialization. This role requires a commercially minded, hands-on leader who can balance product strategy and innovation with oversight of brand, digital marketing, packaging, sales enablement, and other marketing functions. MUST have experience bringing a building material physical product from concept through commercial launch. Required Overnight Travel: 20% **Note, this is a 100% in office position, in Edison, when not traveling Key Responsibilities: Product Marketing & Innovation • Identify unmet customer needs, market trends, competitive gaps, and opportunities for new products., • Help develop and prioritize the company's innovation and new product pipeline., • Lead cross-functional commercialization of new products from concept through launch and customer adoption., • Maintain a strong understanding of competitive products, technologies, pricing, and market trends. Marketing Leadership • Lead, develop, and mentor the Brand Manager, Digital Marketing Manager and Product Engineer., • Establish the overall marketing strategy, priorities, annual plan, and budget., • Provide strategic direction for brand positioning, packaging, creative development, digital marketing, website, social media, and marketing communications., • Ensure the company's brand and product messaging are consistent and differentiated across all customer touchpoints., • Manage outside agencies and marketing partners as needed. Sales & Channel Support • Partner closely with Sales to develop tools and programs that drive product adoption and revenue growth., • Develop product positioning, presentations, competitive comparisons, training materials, samples, displays, and other sales enablement tools. Essential Qualifications: • Bachelor’s degree in Marketing, Business or related field preferred., • 6+ years building materials product marketing experience., • 5+ years progressive marketing experience., • Demonstrated experience bringing physical products from concept through commercial launch., • 4+ years experience developing and leading a team. Benefits: • Generous base salary plus yearly bonus potential, • Medical/Vision/ Dental insurance, • Holiday & Paid Personal Time Off (PTO), • 401k with match, • Company-Paid Life Insurance, • Plus More! K44 Consulting LLC is the leading recruiting firm for many building materials, building products and construction companies. All our positions are direct hire full time opportunities, no temp-perm or contract jobs. #ProductManager #DirectorProductMarketing #MarketingManager #MarketingDirector #BuildingMaterials

Job DescriptionDescriptionArtheon is seeking talented professionals to join our growing team in support of diverse engineering and environmental projects. Whether your background is in civil engineering, environmental science, or infrastructure design, this is a great opportunity to contribute to meaningful work in a collaborative and innovative environment. About Artheon Artheon is a trusted engineering and consulting firm offering services that rival large organizations while maintaining the personalized client relationships of a boutique firm. With expertise spanning civil/site engineering, environmental permitting, transportation infrastructure, construction management, and advanced surveying technologies, we are committed to delivering high-quality, timely solutions to local, state, and federal clients. We're seeking a Director of MEP Engineering to lead our MEP engineering consulting practice. The ideal candidate has a strong technical background in HVAC or electrical design engineering and field experience, enjoys building and developing a team, has strong industry relationships, has a proven record in pursuing and winning work and an interest in growing an MEP practice. The Opportunity You will set the direction for our mechanical, electrical, and plumbing engineering design practice within a multidisciplinary consulting environment. With a strong foundation in HVAC or electrical design, you will guide discipline leaders and design professionals, strengthen client partnerships, and elevate how we plan, coordinate, and deliver projects. This role offers the opportunity to help shape the team’s growth and translate a clear practice vision into measurable results. This role reports to the Head of Technical Services and is located at our headquarter facility in East Brunswick, NJ. ResponsibilitiesLead and Grow the Team (~15%) • Develop and execute a practice growth plan aligned with the firm’s business strategy, market opportunities, and staffing needs., • Recruit, develop, and retain design professionals; provide technical guidance, regular coaching, meaningful feedback, and career development opportunities., • Build a culture of accountability, collaboration, continuous learning, and a growth mindset; develop future technical and project leaders.Provide Technical Direction and Elevate Project Delivery (~50%), • Guide MEP design from planning and concept development through construction documents and construction administration, engaging discipline experts as needed., • Establish clear technical standards and QA/QC expectations; review critical design decisions for quality, constructability, coordination, and alignment with client objectives., • Improve the delivery model through consistent workflows, clear roles, effective project reviews, and thoughtful use of BIM, design tools, and automation., • Partner with project managers and other engineering disciplines to resolve challenges, reduce rework, and deliver coordinated projects on schedule and within budget.Build Client Relationships and Win Work (~20%), • Create and maintain trusted relationships with owners, architects, developers, contractors, and other project partners; serve as a senior client contact., • Lead business development through targeted outreach, opportunity qualification, proposals, scope and fee development, interviews, and cross-disciplinary pursuits., • Represent the firm through active participation in industry and professional organizations, networking, and relevant committees or speaking opportunities., • Identify, pursue and win new projects and new MEP service related opportunitiesManage Practice Performance (~15%), • Monitor and manage team utilization, staffing capacity, backlog, project budgets, and profitability; balance near-term delivery commitments with sustainable growth., • Review project performance with project managers, identify budget and schedule risks early, and implement corrective actions., • Support disciplined scope management, fee negotiations, additional services, and timely billing and collections in collaboration with firm leadership., • Use performance data and client feedback to improve resource planning, delivery consistency, and financial results. Qualifications • 12+ years of progressive experience in HVAC or electrical design engineering consulting, including demonstrated leadership of engineering teams and complex projects., • An active New Jersey Professional Engineer (PE) license, with the ability to obtain licensure in surrounding states., • A bachelor’s degree in mechanical engineering, electrical engineering, or a related engineering discipline., • Strong technical expertise in HVAC or electrical systems, with the ability to oversee coordinated MEP delivery through qualified discipline leaders., • A record of mentoring staff, building effective teams, and creating accountability for quality, schedules, and project outcomes., • Demonstrated success developing and maintaining client relationships, supporting business development, and securing repeat or new project work., • Experience managing team utilization, project financial performance, resource allocation, and practice profitability., • Working knowledge of applicable building and energy codes, engineering standards, design documentation, and construction administration., • Strong communication, presentation, and decision-making skills, with the ability to connect technical recommendations to client and business priorities., • Active involvement in industry and professional organizations and a commitment to continued professional growth.Preferred Experience, • Experience serving clients in New Jersey, New York, and surrounding markets, with established professional relationships., • Experience with municipal, institutional, commercial, or water and wastewater facility projects., • Experience improving multidisciplinary delivery practices, implementing BIM workflows, or expanding an engineering service offering.What Success Looks Like Creating a strong and supportive team culture with clear development paths and structure. Deeper and expanded client relationships with a growing pipeline of work. Consistent, coordinated project delivery. Healthy utilization and profitability supported by disciplined planning. A practice that continues to improve as it grows. Bring your technical expertise, commercial judgment, and commitment to developing people—and help shape the next stage of Artheon’s MEP practice. BenefitsThe base salary range for this role is indicated in the posting. This range reflects the company’s good faith estimate of the compensation for this position at the time of posting. Final compensation will be determined based on factors such as experience, skills, qualifications, internal equity, and geographic location. Artheon offers a competitive compensation package including medical, prescription, dental and vision coverage, 401(k) retirement plan with employer match, educational assistance program and paid time off/parental leave.

Job Description We are currentlyseeking a Design Engineer with 3-5 years of commercial site design and permitting experience. Responsibilities: • Zoning Reviews of municipal zoning and land development ordinances and applicable agency regulations to determine land development limitations for the property, • Site Investigation & Due Diligence, including the review of ordinances, utility service research, outside agency regulations and site visits to establish comprehensive development guidelines, • Preparation of Concept Drawings based upon client's development objectives and conclusions of due diligence. Involves preparation of concept plan and drafting, • Grading design including earthwork analysis, site grading and ADA compliance, • Design of utility systems, including stormwater runoff & conveyance, sanitary sewer collection, water distribution, etc., • Soil Erosion & Sediment Control Design, including stability calculations, Best Management Practices, swale design, spillway design, and determination of construction sequence, • Preparation of Written Correspondence with outside agencies, client, attorney, contractor, etc. Also includes preparation of technical reports including drainage, sanitary sewer and site investigation reports Qualifications: • Bachelor's Degree in Civil Engineering, • 3 - 5 years of commercial site design and permitting experience, • EIT or PE preferred, • Understand jurisdictional requirements, • Proficiency in AutoCAD (Civil 3D preferred), • Experience with local zoning and site permitting processes and agencies preferred, • Self-starter who can work independently and with team members, • Strong organizational skills, • Excellent written and oral communication skills

Job Description At ANS, we’re not just a consulting engineering firm—we’re a team of trailblazers shaping the future of multi-disciplinary engineering. Recognized as one of the Best Places to Work and Top 10 Hottest Engineering Firms in the US by Zweig Reports, and featured in Inc. 5000’s Top 250 for our staggering 1,748% growth, we’re proud of what we’ve built and where we’re headed. We’re allergic to bureaucracy, thrive on innovation, and embrace data-driven decisions. If you love collaboration, creativity, and a fast-paced environment, we might just be your perfect match! Our team includes professionals licensed in over 20 states, with more than 70 years of collective experience. We pride ourselves on fostering a collaborative and supportive work environment that encourages growth and professional development. At ANS, you’ll enjoy paid vacation, sick, and personal time off; support for continuing education and community involvement; and comprehensive healthcare, vision, and dental benefits for eligible employees. We are seeking a motivated and driven Senior Geotechnical Engineer to join our team in our NJ office. ANS is a rapidly growing, emerging civil engineering firm focusing on civil, geotechnical, structural, and electrical engineering for renewable energy and infrastructure projects across the US. “MUST-HAVE” PROFILE OF THE SUCCESSFUL CANDIDATE INCLUDE: • BS in Civil Engineering, Geology, or related degree, • Valid US Drivers License, and a reliable means of transportation, • Flexibility and willingness to travel, on occasion, and for multiple consecutive days periods of times (est. up to one week at a time, once per month), • Strong communication and organizational skills, ability to find solutions to problems, and get-it-done attitude!, • Proficiency with Microsoft Office products, • Minimum 8 years of experience in consulting engineering, or related field, • Experience in preparing Engineering Reports with strong technical writing skills, • Experience with working within and leading team environments, • Working knowledge of geotechnical principles and engineering design“NICE-TO-HAVE” SKILLS FOR THE SUCCESSFUL CANDIDATE MAY INCLUDE:, • Technical licensure track including EIT, GIT, PE, PG, PMP, or similar., • Experience in planning, implementing, overseeing, and managing subsurface investigation programs, • Prior experience with geotechnical investigations, including soil borings, rock coring, and material testing, • Experience with design of foundations, support of excavation systems, and preparing reports, • Prior experience with geotechnical software (gINT, GeoStudio, LPILE, ALLPILE, DeepEx, etc.), • Familiarity with renewable energy sectorTHE CHALLENGES THAT LIE AHEAD INCLUDE:, • Working alongside a team of high-performing engineering and technical professionals, • Performing geotechnical field investigations, construction observation, and engineering evaluation and technical analysis, • Preparing technical reports and summaries, and interfacing directly with coworkers, clients, and stakeholders to communicate findings and recommendations, • Completing technical analyses, including foundation design, support of excavation, and other engineering evaluations, • Actively participating in your career growth, including the opportunity to join elective continuing education courses, being involved in community and professional societies, and managing projects and experiences that stretch you outside of your comfort zone to grow you as a professional. ANS Offers the following benefits to full-time employees: 401(k) matching Dental insurance Health insurance Life insurance Unlimited Paid time off Professional development assistance Vision insurance If you’re ready to work on impactful projects that shape the renewable energy future, ANS is the place for you. Your expertise will make a difference- help us deliver engineering solutions that matter. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionEG&R Engineering PC is a fast-growing multi-disciplinary engineering firm located in Cranbury, NJ. EG&R provides electrical, mechanical, environmental and geotechnical engineering services for a variety of markets including government, utilities/power, waste to energy companies, transit agencies, manufacturing industries, pharmaceuticals, A-E firms/Architects, contractors and various types of commercial clients. EG&R is seeking a Lead Electrical Engineer who is self-motivated and ready to contribute to the future success of EG&R Engineering PC. If you are interested in becoming an integral part of our team, please forward your resume to careers@egrengineering.com. Responsibilities: Main responsibilities include creating electrical protection & control and/or physical layout design deliverables for Power Plants and Substations. • Prepare electrical schematics, single lines, calculations, and specifications for the design of electrical distribution systems for Power Plants and Substations., • Supervise and Coordinate Electrical Engineers and Designers in day to day tasks to support project needs., • Review and support the preparation of physical substation design, sections and details, grounding, lightning protection, control building arrangements, interior and exterior raceways, auxiliary AC/DC power systems, and associated bills of material is required., • Develop protection and control designs including panel arrangements, one lines/single lines, three lines, AC schematics, DC elementaries, equipment wiring and relay panel wiring as required., • Prepare calculations for studies and reports (grounding, lighting protection, AC/DC load studies, etc.), • Prepare equipment specifications for procurement, • Provide short term field support during construction Qualifications: • Must be authorized to Work in the United States. We do not provide Visa sponsorship., • 4 to 8 years of experience in Engineering and Design for Substations and/or Power Plants, • Bachelor of Science/Master’s degree in electrical engineering (Power Distribution/Power Systems) from an accredited institution., • Desire to obtain Engineer-in-Training (EIT) certification and ultimately Professional Engineer (PE) license, • AutoCAD and/or Microstation experience, • Proficiency with National Electrical Safety Code and IEEE / ANSI Standards, • Strong problem solving, organizational, and interpersonal skills., • Aptitude to work in a team environment, • Excellent written & verbal communication skills, • Strong management skills and a desire to grow professionally, • Capability of solving difficult problems that require adaptation and modification of standard approaches, techniques, procedures and criteria

Job Description Employment Type: Full-Time FSLA: Salary/Exempt Division: Project Management Department: Project Management Reports to: Project Manager Supervisory Duties: Yes Compensation: $101,000 - $117,000 The Assistant Project Manager (APM) will serve as a vital team member while assisting the Senior Project Manager and/or Project Manager on all aspects of a project. APM’s will be expected to take on central roles for the oversight of the Project Engineer with a specific focus on document control (RFIs, submittals, material delivery, etc.), subcontractor coordination, design team communication, project reporting and overall representation of Consigli throughout the entirety of the project. Responsibilities / Essential Functions • Serve as a main point of contact for communication with Owners, OPMs and Design Teams members., • Coordinate and provide input during weekly meetings with subcontractors, design teams, and owner representatives to resolve field conflicts and drive resolution., • Support project cost and change management process: prepare reports for review with other team members and present at both Owner and internal meetings., • Assist in development of estimates and bid proposals for both lump sum and GMP projects., • Oversight/Management of Project Engineer and associated responsibilities including document Control, RFIs, Submittals, Material Delivery Tracking and Meeting Minutes., • Mentor: support, develop, and train supporting team members, including Project Engineers., • Maintain close relations with subcontractors, including early notification of submittal & material delivery schedule expectations., • Monitor executed subcontracts and insurance certificates; verify contracts and insurance are in place prior to commencing work., • Coordinate with Project Scheduler to update and distribute project master schedule with input from Superintendent and project team., • Assist the project Superintendent and other team members in the resolution of all critical issues, RFI’s, etc. with a focus on quality, cost and schedule; provide documentation as necessary., • Take ownership of the closeout process: complete and implement project closeout checklist., • Manage close-out documentation (as-builts, O&Ms, warranties, test reports, etc.) for submission to Design Team and Owner., • Manage financial closeout process with subcontractors and Owner., • Punch List: Upload and distribute the punch list through Procore to subcontractors., • Assist with coordinating work completion as required and maintain an accurate log of items to be completed., • Observations and Field Reports: work with project team to conduct field walks as necessary and compile any corresponding documentation accordingly. Review Design Team field reports and work with required parties to resolve open items and drive to resolutions., • Safety: perform regular safety walks with field and safety staff and record observations. Key Skills, • Strong communication skills., • Ability to review, understand and support all change management processes., • Strong initiative and problem-solving abilities., • Ability to multi-task and self-prioritize., • Motivated and driven., • Ability to work in a team environment with a primary focus on collaboration., • Excellent written and verbal presentation skills. Required Experience • A bachelor's degree in engineering, Construction Management or Architecture preferred., • 3 - 5 years’ experience within the construction industry in project management or similar role., • OSHA 10 and OSHA-30 preferred., • Additional proficiencies may include cost management software (Timberline, Sage preferred), scheduling software (Primavera P6 preferred) and construction management software (Procore preferred).

Job DescriptionJob Title: Sales Engineer Job Location: Northern NJ Operating Company: Klima New Jersey (KNJ) FLSA Status: Exempt Salary Range: $150k - $300k (base + commission) About: Klima New Jersey (KNJ) - A member of the AIR Control Concepts family. At Klima New Jersey, we’re not here to chase small wins—we’re here to partner on the biggest, most technically demanding HVAC projects in the region. We represent the best-in-class HVAC manufacturers and provide strategic equipment solutions that meet the high standards of consulting engineers, mechanical contractors, building owners, and end-users. Check out our website: Reliable HVAC Solutions for Commercial Buildings | Klima NJ Job Description: As a key player in the Klima Group, our Northern NJ office is expanding to meet growing demand and we’re looking for a seasoned sales engineer ready to lead, influence, and deliver. This Sales Engineer position offers a high-performance culture with the support and tools to help you succeed, Strong brand reputation and a line card that sells itself and a clear path to top-tier earnings: $200K–$300K+ (with no cap on commission) Essential Duties and Responsibilities: • Own the Territory: Manage and expand a book of business with established consulting engineers, design-build contractors, and key decisionmakers across the Northern NJ market., • Engineer the Win: Analyze project specifications, select optimal equipment, and develop engineered solutions that meet both performance and budget goals., • Act as a Strategic Advisor: Guide customers through complex HVAC applications with a consultative approach. Deliver clarity, confidence, and value throughout every phase of the buying cycle., • Deliver the Full Klima Experience: Collaborate with our inside application and estimating teams to ensure seamless proposals and execution., • Promote and Educate: Represent Klima and our manufacturers through presentations, industry events, and targeted technical discussions., • Drive Results: Consistently meet or exceed sales targets with a focus on long-term client relationships, not transactional wins. Experience and Requirements: • 5+ years of proven success in HVAC equipment sales (preferably in a manufacturer’s rep or mechanical sales environment), • Strong relationships in the North Jersey engineering or contracting community, • Deep understanding of HVAC systems, building design, and mechanical construction, • Technical acumen with the ability to communicate complex ideas simply and clearly, • Bachelor’s degree in Mechanical Engineering, Building Sciences, or Business (or equivalent experience), • Self-motivated, accountable, and driven by performance Benefits: We offer a competitive and comprehensive benefits package, including: • Health & Wellness – Medical, dental, vision, and life insurance coverage to support your well-being., • Financial Security – 401(k) retirement plan with company match and short/long-term disability coverage., • Work-Life Balance – Paid time off (PTO), paid holidays, and an employee assistance program (EAP)., • Professional Development – Ongoing training opportunities and support for continuing education. The Company provides equal employment opportunities in accordance with applicable laws and prohibits discrimination and harassment. Employment decisions are based on business needs and qualifications. The Company complies with disability laws and provides reasonable accommodation to qualified individuals. Powered by JazzHR BoyuFJwDUP

Job Description Job Summary: Karbon Engineering has an outstanding opportunity for a talented and motivated Mechanical or Electrical Commissioning Engineer. Candidates must have 2-6 years of experience in operation / testing of: Mechanical Candidate: HVAC systems including water-cooled or air-cooled chiller plants, primary-secondary pumping systems, variable-flow primary-only pumping systems, air handling units, fans and control systems or equivalent mechanical systems. Electrical Candidate: UPS Systems, Generators, Switchgear Controls Must have good communication skills, be computer literate and be able to travel. Experience with Facility Grid a plus. Bachelor’s degree is desirable; equivalent experience will be considered. Responsibilities: Responsibilities include preparation of commissioning plans, pre-functional checklists and test procedures; performing construction inspections, testing equipment and systems, report writing, running meetings and discrepancy resolution. \nCompany Description Karbon Engineering is a professional engineering firm that specializes in HVAC, Electrical Power, Fire Protection, Plumbing, Sustainable Design, and Commissioning of critical facilities and data centers. The position will be based out of the New Jersey/New York/Pennsylvania area. As an equal opportunity employer, Karbon Engineering invites resumes from all interested parties. Please submit your resumes to careers@karbonengineering.com Karbon Engineering is a professional engineering firm that specializes in HVAC, Electrical Power, Fire Protection, Plumbing, Sustainable Design, and Commissioning of critical facilities and data centers. The position will be based out of the New Jersey/New York/Pennsylvania area.\n \nAs an equal opportunity employer, Karbon Engineering invites resumes from all interested parties.\nPlease submit your resumes to careers@karbonengineering.com

Job DescriptionDuration: 24 Months Contract Job Summary: • The successful candidate will work as a Structural Engineer in the Outside Plant (OP) Engineering & Design Group within the Construction & Maintenance organization of the Electric T&D – Projects & Construction line of business utilizing a broad knowledge of business and engineering principles and practices., • The successful candidate will be an experienced structural engineer with broad knowledge and experience in electric transmission and distribution design and construction. Perform detailed civil / structural engineering design and analysis and solve complex technical issues., • The successful candidate will demonstrate an ability to lead and will coordinate and perform structural design, alterations, and repairs to produce construction drawings and calculations, as well as provide field construction support., • Perform technical reviews on engineering design practices and provide engineering-related comments, as necessary. Oversee the work and provide technical guidance and direction to junior-level engineers. Job Responsibilities: • Perform complex civil / structural calculations and analysis, • Prepare construction drawings, including steel, aluminum, concrete structures and foundations, • Design and detail steel transmission structures, including both lattice steel towers and tubular steel poles / structures, • Prepare existing structural and foundation reinforcement drawings, • Perform underground duct bank and manhole structural design Required Skills, Knowledge and Experience: • Minimum of eight (8) years of experience in civil / structural engineering, including design and field / resident engineering on major civil / structural construction, alteration / renovation and modification projects, • Experience in performing complex civil / structural calculations and analysis, • Experience in preparing construction drawings, including steel, aluminum, concrete structures and foundations, • Experience in designing and detailing of steel transmission structures, including both lattice steel towers and tubular steel poles / structures, • Experience in preparing existing structural and foundation reinforcement drawings, • Knowledge of subsurface investigation and different geology conditions, • Experience in deep foundation design, including concrete caisson, driven pile, helical foundations, as well as steel vibratory caisson, • Experience in performing underground duct bank and manhole structural design, • Working knowledge of utility best practices, ASME, NESC, ACI, ASTM, and ASCE standards, • Proficient experience utilizing PLSPOLE, PLSTOWER, RISA and STAAD Pro for structural designs, • Proficient experience utilizing LPILE, GROUP, and FAD Tools for foundation designs, • Proficient experience utilizing Microsoft Office products, • Must be familiar with AutoCAD / MicroStation, • Must have New Jersey P.E. License, • Clear and concise writing and verbal communications skills Preferred / Desired Skills: • Advanced Technical or Engineering Degree, • Advanced technical training, • Familiar with preparing bottom-up engineering estimates, • Familiar with NESC, PJM and loading criteria for transmission structures, • Knowledgeable in excavation stability, subgrade preparation, backfilling, thermal and electrical properties of soils, and dewatering Education: • B.S. Degree in Structural / Civil Engineering About US Tech Solutions: US Tech Solutions is a global staff augmentation firm providing a wide range of talent on-demand and total workforce solutions. To know more about US Tech Solutions, please visit www.ustechsolutions.com US Tech Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, colour, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. AI Statement: By applying, you acknowledge that AI-assisted tools may be used during hiring. #LI-AS140

Job Description Our client is seeking a solution-driven Energy Engineer to support clean energy and energy-efficiency programs for a major utility provider in New Jersey. This opportunity is open to junior- and mid-level professionals with experience or a strong interest in energy efficiency, commercial building systems, utilities, or related fields. • Provide technical guidance on energy-efficient technologies and practices to customers, architects, engineers, contractors, and trade allies., • Prepare and review technical specifications and engineering calculations for commercial and industrial energy-efficiency projects., • Validate energy-savings calculations for accuracy and compliance with program requirements and applicable technical reference manuals., • Monitor assigned projects and ensure they progress on schedule., • Maintain accurate project records by promptly documenting review activities and updates in the CRM system., • Develop and maintain relationships with architects, engineers, contractors, customers, service providers, and consultants., • Gather program feedback and help identify participant needs., • Support and conduct program training for prospective participants, as needed., • Evaluate building plans, specifications, and whole-building efficiency strategies., • Assist with recommendations for energy-efficiency improvements., • Prepare project status reports and monitor progress toward program goals., • Support quality-assurance activities, including inspections and customer surveys., • Travel throughout the client’s New Jersey service territory as required. Qualifications • Bachelor’s degree in Engineering, Architecture, Energy, Building Science, Construction Management, or a related field., • Junior level: 0–3 years of relevant experience., • Mid-level: 4–5+ years of relevant experience., • Strong analytical and problem-solving abilities., • Ability to communicate technical information to both technical and non-technical audiences., • Ability to collaborate effectively with internal teams, clients, and external partners., • Ability to work in a fast-paced, team-oriented environment., • Proficiency in Microsoft Word, Excel, PowerPoint, and Outlook., • Must be a New Jersey resident., • Must possess a valid driver’s license, a clean driving record, and reliable transportation., • Responsible for vehicle maintenance and related transportation costs. Preferred Qualifications • Familiarity with energy-efficiency programs, technologies, and commercial building systems., • Experience with energy-efficiency calculations or modeling platforms., • Understanding of ASHRAE 90.1 standards., • Knowledge of building science principles and sustainable building practices., • Internship, academic project, or professional experience involving commercial construction, utilities, or energy programs., • Progress toward or interest in obtaining a LEED or Certified Energy Manager certification. Benefits: • Health Insurance, • PTO, • Sick time, • 401k Pay Range: $35.00 - $48.00 per hour (Depending on experience and qualifications) By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from HEPCO, Inc and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy at https://www.hepcoinc.com/privacy/ All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, gender expression, marital status, national origin, age, veteran status, disability, or any other protected class.

Job Description Whitestone Associates, Inc. is a 100% employee-owned Geotechnical and Environmental consulting firm with offices throughout the eastern United States. We are committed to building a collaborative team environment where employee-owners are encouraged to grow professionally, take on meaningful responsibility, and contribute to the continued success of the organization. Key Responsibilities: • Plan, coordinate, and manage geotechnical investigations, ensuring alignment with project goals, timelines, and budget constraints;, • Coordinate and/or supervise geotechnical fieldwork, including soil boring observations, test pit investigations, and in-field sampling/testing to assess subsurface conditions;, • Oversee geotechnical testing and compliance monitoring during construction, ensuring adherence to design recommendations and material specifications;, • Interpret geotechnical data, conduct engineering analyses, and develop comprehensive reports with recommendations for clients and stakeholders;, • Serve as the primary point of contact for clients, contractors, and regulatory agencies, providing clear technical guidance and project updates; and, • Stay updated with industry trends, codes, and regulations related to geotechnical engineering, and apply this knowledge to enhance project outcomes. Qualifications: • Bachelor's degree in Civil Engineering or a related field;, • Professional Engineer and/or on track to obtain P.E. license once experience requirements are fulfilled;, • 4-8+ years of relevant experience in geotechnical engineering, including field investigations, laboratory testing, and geotechnical analyses;, • Strong analytical and problem-solving skills, with the ability to interpret and analyze geotechnical data;, • Strong leadership, project management, and problem-solving abilities;, • Excellent written and verbal communication skills, with the ability to effectively present technical information to clients and project teams; and, • Ability to work independently and collaboratively in a team environment, managing multiple projects and deadlines simultaneously. Higher compensation than the amount listed below may be offered commensurate with experience and qualifications. Salary Range $80,000—$120,000 USD Benefits: Benefits eligibility is dependent on full-time employment status. • Whitestone's Employee Stock Ownership Program (offered at no cost to each eligible employee), • Medical Insurance, • Dental Insurance, • Vision Insurance, • Health & Dependent Care Flexible Spending Accounts, • Traditional & Roth 401K Plans with Company Match, • Long Term & Short Term Disability Insurance, • Company-Sponsored Life & AD&D Insurance, • Multiple AFLAC Insurance Products, • Pet Insurance, • Identity Theft Protection, • Group Legal Plan, • Multiple Corporate Discount Programs, • Employee Assistance Program (EAP) Whitestone Associates, Inc. is an Equal Opportunity Employer and does not tolerate unlawful discrimination in its employment practices. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, citizenship status, age, disability, protected veteran status, or any other status protected by applicable federal, state, or local law. Whitestone does not tolerate harassment or discrimination based on any protected characteristic. All complaints of harassment are taken seriously and will be investigated promptly and thoroughly.

Job Description Position Overview The Field Engineer is a critical member of our growing Engineering department at GRA Design Studio, responsible for performing detailed on-site investigations that support project feasibility, engineering decisions, and design development. This role focuses primarily on conducting MEP-focused engineering site surveys, capturing existing conditions, and identifying system-related constraints. The Field Engineer will also support due diligence analysis based on field observations and assist with production work as needed to ensure project continuity and team flexibility. Key Responsibilities MEP-Focused Site Surveys & Field Assessments • Conduct thorough on-site MEP field surveys, documenting existing mechanical, electrical, plumbing, fire protection, and related building systems., • Capture accurate measurements, field notes, and photographic documentation to support engineering and architectural teams., • Identify system deficiencies, capacity considerations, code-related issues, and potential design or construction challenges., • Coordinate site access, interact with building personnel, and ensure all field data is collected safely and efficiently. Due Diligence & Analysis • Perform due diligence evaluations informed by on-site observations, focusing on system conditions, risks, and feasibility., • Prepare clear and concise due diligence reports summarizing findings, system impacts, and recommendations., • Assist in verifying compliance with applicable codes and standards related to MEP systems and existing building conditions., • Communicate findings to internal engineering and design teams to support scoping, planning, and decision-making. Production & Project Support • Drafting, documentation updates, and production tasks in AutoCAD, Revit, and other software., • Incorporate field findings into engineering drawings, coordination sets, and project documents., • Support engineers and architects with redlines, revisions, and project coordination., • Provide flexibility across fieldwork, analysis, and production based on project workload and departmental needs. Qualifications • Bachelor’s degree in Engineering, Architecture, Construction Management, or related field preferred., • 1–3 years of experience in field engineering, MEP surveys, construction, or similar technical roles., • Working knowledge of building MEP systems, existing facility evaluations, and construction processes., • Proficiency with field equipment, digital measuring tools, and drafting platforms (AutoCAD required; Revit a plus)., • Strong documentation skills and attention to detail in fast-paced field environments., • Ability to work independently at job sites and collaborate effectively with engineering, architectural, and project management teams., • Clear communication skills, with the ability to present technical findings to both technical and non-technical audiences. Core Competencies • MEP Field Investigation, • Technical Assessment & Problem-Solving, • Time Management & Organization, • Clear Written & Verbal Communication, • Cross-Disciplinary Collaboration, • Adaptability & Flexibility Work Environment • Frequent travel to project sites required., • Work may include indoor, outdoor, active construction, or existing facility environments., • Occasional office-based work for reporting, coordination, and production tasks. Benefits: • Health, dental, & vision insurance, • Paid time off & Holidays, • Career growth opportunities & professional development assistance (Amber Books subscription, additional PTO for ARE prep & testing), • Retirement plan (401K with up to 3% match), • Collaborative team dynamic, • Extracurricular activities (sports clubs, bowling leagues, etc) & company events, • Wellness activities and benefit offerings, • Flex scheduling, • Hybrid work environment

Job Description Genesis10 is currently seeking a Structural Engineer - Hybrid position with a Major Utility Company located in South Plainfield, NJ. This is a 24 month contract opportunity. The successful candidate will work as a Structural Engineer within the Outside Plant Engineering & Design Group, utilizing a broad knowledge of business and engineering principles. This role involves performing detailed civil/structural engineering design and analysis for electric transmission and distribution projects. The ideal candidate will coordinate and perform structural design, alterations, and repairs to produce construction drawings and calculations, as well as provide field construction support. Responsibilities: • Perform complex civil / structural calculations and analysis, • Prepare construction drawings, including steel, aluminum, concrete structures and foundations, • Design and detail steel transmission structures, including both lattice steel towers and tubular steel poles / structures, • Prepare existing structural and foundation reinforcement drawings, • Perform underground duct bank and manhole structural design Requirements: • B.S. Degree in Structural / Civil Engineering, • Minimum of eight (8) years of experience in civil / structural engineering, including design and field / resident engineering on major civil / structural construction, alteration / renovation and modification projects, • Experience in performing complex civil / structural calculations and analysis, • Experience in preparing construction drawings, including steel, aluminum, concrete structures and foundations, • Experience in designing and detailing of steel transmission structures, including both lattice steel towers and tubular steel poles / structures, • Experience in preparing existing structural and foundation reinforcement drawings, • Knowledge of subsurface investigation and different geology conditions, • Experience in deep foundation design, including concrete caisson, driven pile, helical foundations, as well as steel vibratory caisson, • Experience in performing underground duct bank and manhole structural design, • Working knowledge of utility best practices, ASME, NESC, ACI, ASTM, and ASCE standards, • Proficient experience utilizing PLSPOLE, PLSTOWER, RISA and STAAD Pro for structural designs, • Proficient experience utilizing LPILE, GROUP, and FAD Tools for foundation designs, • Proficient experience utilizing Microsoft Office products, • Must be familiar with AutoCAD / MicroStation, • Must have New Jersey P.E. License, • Clear and concise writing and verbal communications skills, • Must possess a valid U.S. driver's license with a safe and satisfactory driving history Desired skills: • Advanced Technical or Engineering Degree, • Advanced technical training, • Familiar with preparing bottom up engineering estimates, • Familiar with NESC and PJM loading criteria for transmission structures, • Knowledgeable in excavation stability, subgrade preparation, backfilling, thermal and electrical properties of soils, and dewatering Pay range: $80.20 - $90.20 per hour Only candidates available and ready to work directly as Genesis10 employees will be considered for this position. If you have the described qualifications and are interested in this exciting opportunity, please apply! Ranked a Top Staffing Firm in the U.S. by Staffing Industry Analysts for six consecutive years, Genesis10 puts thousands of consultants and employees to work across the United States every year in contract, contract-for-hire, and permanent placement roles. With more than 300 active clients, Genesis10 provides access to many of the Fortune 100 firms and a variety of mid-market organizations across the full spectrum of industry verticals. For contract roles, Genesis10 offers the benefits listed below. If this is a perm-placement opportunity, our recruiter can talk you through the unique benefits offered for that particular client. Benefits of Working with Genesis10: • Access to hundreds of clients, most who have been working with Genesis10 for 5-20 years., • The opportunity to have a career-home in Genesis10; many of our consultants have been working exclusively with Genesis10 for years., • Access to an experienced, caring recruiting team (more than 7 years of experience, on average.), • Behavioral Health Platform, • Medical, Dental, Vision, • Health Savings Account, • Voluntary Hospital Indemnity (Critical Illness & Accident), • Voluntary Term Life Insurance, • 401K, • Sick Pay (for applicable states/municipalities), • Commuter Benefits (Dallas, NYC, SF, and Illinois) For multiple years running, Genesis10 has been recognized as a Top Staffing Firm in the U.S., as a Best Company for Work-Life Balance, as a Best Company for Career Growth, for Diversity, and for Leadership, amongst others. To learn more and to view all our available career opportunities, please visit us at our website. Genesis10 is an Equal Opportunity Employer. Candidates will receive consideration without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Job DescriptionDescriptionAbout ArtheonArtheon is a trusted engineering and consulting firm offering services that rival large organizations while maintaining the personalized client relationships of a boutique firm. With expertise spanning civil/site engineering, environmental permitting, transportation infrastructure, construction management, and advanced surveying technologies, we are committed to delivering high-quality, timely solutions to local, state, and federal clients. We are seeking a highly motivated Senior Transportation Planner to join our Transportation team in our Berlin, NJ or East Brunswick, NJ offices. This is an excellent opportunity for a motivated professional looking to contribute to a wide range of transportation planning and traffic engineering projects throughout New Jersey and the surrounding region. The Senior Transportation Planner will support transportation planning and traffic engineering projects by preparing traffic impact studies, analyzing transportation systems, and assisting with traffic operations and safety improvements. The ideal candidate is a detail-oriented professional who enjoys working collaboratively, managing multiple assignments, and developing practical solutions for public and private sector clients. Responsibilities • Lead technical research and writing, document preparation and publication efforts, • Lead the preparation of proposals, development of scopes of work and create work hour estimates, • Assist with traffic impact studies, preliminary traffic analyses, and transportation planning reports., • Assist in the development of Maintenance and Protection of Traffic (MPT) plans and traffic signal design, including signing and pavement marking plans., • Assist with traffic operations and safety studies to support roadway improvement projects., • Attend and assist with public meetings, public hearings, presentations, and client coordination activities., • Prepare comprehensive plans, zoning regulations/form-based codes, design guidelines, and other community plans., • Complete all aspects of public engagement: presentation materials, community surveys, stakeholder interviews, website setup, and community meetings., • Develop transportation planning strategies for communities throughout New Jersey., • Conduct environmental review (SEQRA/NEPA), including preparation of Environmental Impact Statements., • Coordinate with engineers, planners, and other project team members to deliver high-quality work on schedule., • Manage multiple assignments while maintaining strong attention to detail and meeting project deadlines. Qualifications • Bachelor's and/or Master’s Degree in Civil Engineering, Urban/Regional Planning, Transportation Planning, or a related field., • Approximately 10+ years of practical experience in transportation planning, including experience in a Project Management/leadership role., • Must be a licensed Professional Planner (PP) and/or Professional Engineer (PE) license in New Jersey, or the ability to obtain licensure through reciprocity within a reasonable timeframe., • Must be certified by American Institute of Certified Planners (AICP), • Safety Professional (RSP) certification or Professional Traffic Operations Engineer (PTOE) certification is preferred., • Experience working on NJDOT and/or New Jersey MPO projects as related to transportation planning., • Demonstrated excellence in technical writing, experience in preparing budgets/work plan and proposals., • Experience preparing traffic impact studies and performing traffic modeling and simulation., • Experience performing Roadside Safety Audits and Data Driven Safety Analysis, • Must be accomplished in the management of multiple projects with excellent presentation, verbal, and written communication skills., • Ability to interact effectively with clients, project teams, and colleagues internally and externally., • Ability to work both independently and collaboratively within a multidisciplinary team., • Ability to work in fast-paced environment and meet project deadlines., • Strong knowledge of Microsoft Office, Word, Excel and Power Point is required., • ESRI ArcGIS software familiarity. Adobe Creative Suite familiarity. BenefitsThe base salary range for this role is indicated in the posting. This range reflects the company’s good faith estimate of the compensation for this position at the time of posting. Final compensation will be determined based on factors such as experience, skills, qualifications, internal equity, and geographic location. Artheon offers a competitive compensation package including medical, prescription, dental and vision coverage, 401(k) retirement plan with employer match, educational assistance program and paid time off/parental leave.

Job Description Ranked the #4 Large Employer to Work for in America and residing in the Top 400 on Engineering News Record (ENR)'s List of Top Design Firms in the nation, Traffic Planning & Design is currently hiring dynamic Engineers at all levels. Our ideal candidate has minimum of 4-8 years of experience, a strong work ethic, a desire to learn, the willingness to work cohesively within a team, and the ability to work on multiple projects. Additionally, we offer a creative, flexible, supportive and fun environment! Duties and Responsibilities include, but are not limited to: • Manage projects, staff and clients., • Work with multi-disciplinary teams on tasks such as work zone traffic, intersection design, traffic signal design, roadway signing and pavement marking plans, DOT access permitting, control plans and traffic signal operations analysis., • Assist in the preparation specifications, plans, construction schedules, impact studies, permits, and designs for projects., • Assist with traffic/parking studies, corridor planning, feasibility studies, and safety audits., • Coordinate with field inspection staff and serve as an on-site project representative. Job Requirements • Bachelor’s Degree in Civil Engineering, • Professional Engineering (PE) license in NJ required (or ability to obtain within first 6 months), • Professional Traffic Operations Engineer (PTOE) desirable, • Excellent oral and written communication skills, • Experience with design standards, NJDOT experience (desirable), • Knowledge of CADD Software (MicroStation and/or AutoCAD), • Strong work ethic and ability to work on multiple projects and ability to meet multiple deadlines, • Knowledge of Microsoft Office Suite, • Valid Driver’s License Salary Range: $90,000 - $110,000 (depending on qualifications) Don't meet every qualification or skill in the description? That's ok! We are fully committed to expanding our staff and culture to best serve our clients and our communities. If you are interested in this position but don't completely align with every qualification listed, we encourage you to apply. You may be what we are looking for, for this role or maybe for another open position. At TPD we exist to improve the quality of life for the public and are dedicated to Moving Forward Together.

Job DescriptionLead Operating Engineer Location: Iselin, NJ 08830 Pay Rate: $41-$43/hr Work for a client in Iselin, NJ, in a Lead Operating Engineer role supporting the safe, efficient operation and maintenance of industrial office building equipment. This opportunity is ideal for an experienced operating engineer with strong troubleshooting skills and a hands-on approach to equipment reliability. Job Duties & Responsibilities • Operate, monitor, and adjust heavy machinery and industrial equipment to ensure safe and efficient performance., • Perform routine maintenance, diagnose equipment malfunctions, and complete repairs to minimize downtime., • Troubleshoot mechanical and operational issues while maintaining accurate records of equipment operations, maintenance, and repairs., • Follow established safety procedures, collaborate with maintenance and production teams, and communicate equipment conditions and maintenance needs. Required Skills & Experience • Experience as an Operating Engineer or in a similar role handling heavy equipment in an industrial or construction environment., • Strong understanding of heavy machinery and industrial equipment operating principles, along with proficiency using hand tools, power tools, and diagnostic equipment., • Ability to read and interpret technical manuals and schematics, with strong troubleshooting and problem-solving skills., • Ability to perform physical work in varied environmental conditions while adhering to safety protocols and procedures. Preferred Skills & Experience • High school diploma or equivalent., • Post-secondary training, technical education, or apprenticeship in operating engineering or a related field. Apply Today! If you have the operating engineering experience and technical skills to keep industrial equipment running safely and efficiently, apply today to be considered for this opportunity in Iselin, NJ. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Synerfac Technical Staffing and our contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undeliverable messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy at www.synerfac.com/privacy/

Job DescriptionDescription: *Actual Job Title: Structural Engineer *Work location: Hybrid, (Hadley Rd, South Plainfield) 3 days in office and 2 days remote *Driving required: Drive to and from Client standard work locations *Mileage can be expensed Structural Engineer The successful candidate will work as a Structural Engineer in the Outside Plant (OP) Engineering & Design Group within the Construction & Maintenance organization of the Electric T&D Projects & Construction line of business utilizing a broad knowledge of business and engineering principles and practices. The successful candidate will be an experienced structural engineer with broad knowledge and experience in electric transmission and distribution design and construction. Perform detailed civil / structural engineering design and analysis and solve complex technical issues. The successful candidate will demonstrate an ability to lead and will coordinate and perform structural design, alterations, and repairs to produce construction drawings and calculations, as well as provide field construction support. Perform technical reviews on engineering design practices and provide engineering-related comments, as necessary. Oversee the work and provide technical guidance and direction to junior-level engineers. Job Responsibilities "Perform complex civil / structural calculations and analysis "Prepare construction drawings, including steel, aluminum, concrete structures and foundations "Design and detail steel transmission structures, including both lattice steel towers and tubular steel poles / structures "Prepare existing structural and foundation reinforcement drawings "Perform underground duct bank and manhole structural design Job Specific Qualifications Required Skills, Knowledge and Experience: "B.S. Degree in Structural / Civil Engineering "Minimum of eight (8) years of experience in civil / structural engineering, including design and field / resident engineering on major civil / structural construction, alteration / renovation and modification projects "Experience in performing complex civil / structural calculations and analysis "Experience in preparing construction drawings, including steel, aluminum, concrete structures and foundations "Experience in designing and detailing of steel transmission structures, including both lattice steel towers and tubular steel poles / structures "Experience in preparing existing structural and foundation reinforcement drawings "Knowledge of subsurface investigation and different geology conditions "Experience in deep foundation design, including concrete caisson, driven pile, helical foundations, as well as steel vibratory caisson "Experience in performing underground duct bank and manhole structural design "Working knowledge of utility best practices, ASME, NESC, ACI, ASTM, and ASCE standards "Proficient experience utilizing PLSPOLE, PLSTOWER, RISA and STAAD Pro for structural designs "Proficient experience utilizing LPILE, GROUP, and FAD Tools for foundation designs "Proficient experience utilizing Microsoft Office products "Must be familiar with AutoCAD / MicroStation "Must have New Jersey P.E. License "Clear and concise writing and verbal communications skills "As the job requires driving to Company locations and off-site assignments and events, must possess a valid U.S. driver's license with a safe and satisfactory driving history Preferred / Desired Skills: "Advanced Technical or Engineering Degree "Advanced technical training "Familiar with preparing bottom up engineering estimates "Familiar with NESC, PJM and Client loading criteria for transmission structures "Knowledgeable in excavation stability, subgrade preparation, backfilling, thermal and electrical properties of soils, and dewatering Minimum Years of Experience 8 years of experience

Job Description HEPCO is seeking an experienced Structural Engineer to support our client’s Outside Plant Engineering & Design Group. This role involves civil and structural engineering design, analysis, and field construction support for electric transmission and distribution projects. The successful candidate will develop construction drawings and calculations, support structural alterations and repairs, review engineering designs, and provide technical guidance to junior engineers. • Perform complex civil and structural engineering calculations and analyses., • Prepare construction drawings for steel, aluminum, and concrete structures and foundations., • Design and detail steel transmission structures, including lattice steel towers and tubular steel poles., • Prepare reinforcement drawings for existing structures and foundations., • Design underground duct banks and manholes., • Design deep foundations, including concrete caissons, driven piles, helical foundations, and steel vibratory caissons., • Provide field construction support and resolve complex technical issues., • Review engineering designs and provide technical recommendations., • Coordinate design activities and provide technical direction to junior engineers.Required Qualifications, • Bachelor’s degree in Civil or Structural Engineering., • Minimum 8 years of civil/structural engineering experience, including design and field or resident engineering for major construction, renovation, alteration, and modification projects., • Active New Jersey P.E. license., • Experience with structural calculations, construction drawings, transmission structure design, and reinforcement of existing structures and foundations., • Knowledge of subsurface investigations and varying geological conditions., • Experience with deep foundation, underground duct bank, and manhole design., • Working knowledge of utility best practices and ASME, NESC, ACI, ASTM, and ASCE standards., • Proficiency with PLSPOLE, PLSTOWER, RISA, and STAAD.Pro for structural design., • Proficiency with LPILE, GROUP, and FAD Tools for foundation design., • Proficiency with Microsoft Office and familiarity with AutoCAD or MicroStation., • Strong written and verbal communication skills., • Valid U.S. driver’s license and a safe, satisfactory driving history.Preferred Qualifications, • Advanced technical or engineering degree and/or advanced technical training., • Familiarity with preparing bottom-up engineering estimates., • Familiarity with NESC, PJM, and utility-specific loading criteria for transmission structures., • Knowledge of excavation stability, subgrade preparation, backfilling, soil thermal and electrical properties, and dewatering. Benefits: • Health Insurance, • Sick time, • 401k Pay Range: $92.00 - $97.00 per hour (Depending on experience and qualifications) By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from HEPCO, Inc and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy at https://www.hepcoinc.com/privacy/ All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, gender expression, marital status, national origin, age, veteran status, disability, or any other protected class.

Job DescriptionDuration: 2 years assignment with possible of extension Work location: Hybrid, (Hadley Rd, South Plainfield) 3 days in office and 2 days remote Driving required: Drive to and from Client standard work locations Mileage can be expensed Pay range: $90.00 - 101.23/hr on w2 (all inclusive) Minimum Years of Experience: 8 years of experience Job description: Structural Engineer The successful candidate will work as a Structural Engineer in the Outside Plant (OP) Engineering & Design Group within the Construction & Maintenance organization of the Electric T&D – Projects & Construction line of business utilizing a broad knowledge of business and engineering principles and practices. The successful candidate will be an experienced structural engineer with broad knowledge and experience in electric transmission and distribution design and construction. Perform detailed civil / structural engineering design and analysis and solve complex technical issues. The successful candidate will demonstrate an ability to lead and will coordinate and perform structural design, alterations, and repairs to produce construction drawings and calculations, as well as provide field construction support. Perform technical reviews on engineering design practices and provide engineering-related comments, as necessary. Oversee the work and provide technical guidance and direction to junior-level engineers. Job Responsibilities: -Perform complex civil / structural calculations and analysis -Prepare construction drawings, including steel, aluminum, concrete structures and foundations -Design and detail steel transmission structures, including both lattice steel towers and tubular steel poles / structures -Prepare existing structural and foundation reinforcement drawings -Perform underground duct bank and manhole structural design Job Specific Qualifications: Required Skills, Knowledge and Experience: -B.S. Degree in Structural / Civil Engineering -Minimum of eight (8) years of experience in civil / structural engineering, including design and field / resident engineering on major civil / structural construction, alteration / renovation and modification projects -Experience in performing complex civil / structural calculations and analysis -Experience in preparing construction drawings, including steel, aluminum, concrete structures and foundations -Experience in designing and detailing of steel transmission structures, including both lattice steel towers and tubular steel poles / structures -Experience in preparing existing structural and foundation reinforcement drawings -Knowledge of subsurface investigation and different geology conditions -Experience in deep foundation design, including concrete caisson, driven pile, helical foundations, as well as steel vibratory caisson -Experience in performing underground duct bank and manhole structural design -Working knowledge of utility best practices, ASME, NESC, ACI, ASTM, and ASCE standards -Proficient experience utilizing PLSPOLE, PLSTOWER, RISA and STAAD Pro for structural designs -Proficient experience utilizing LPILE, GROUP, and FAD Tools for foundation designs -Proficient experience utilizing Microsoft Office products -Must be familiar with AutoCAD / MicroStation -Must have New Jersey P.E. License -Clear and concise writing and verbal communications skills -As the job requires driving to Company locations and off-site assignments and events, must possess a valid U.S. driver’s license with a safe and satisfactory driving history Preferred / Desired Skills: -Advanced Technical or Engineering Degree -Advanced technical training -Familiar with preparing bottom-up engineering estimates -Familiar with NESC, PJM and Client loading criteria for transmission structures -Knowledgeable in excavation stability, subgrade preparation, backfilling, thermal and electrical properties of soils, and dewatering

Job DescriptionDescriptionAbout ArtheonArtheon is a trusted engineering and consulting firm offering services that rival large organizations while maintaining the personalized client relationships of a boutique firm. With expertise spanning civil/site engineering, environmental permitting, transportation infrastructure, construction management, and advanced surveying technologies, we are committed to delivering high-quality, timely solutions to local, state, and federal clients. We are seeking fresh engineering graduates to support transportation and infrastructure construction projects across highways, bridges, and airports. The successful candidate will perform field inspection and office engineering duties, including interpreting construction plans and specifications, overseeing materials testing, reviewing documentation, and preparing reports. Experience with NJDOT or NJ Turnpike Authority projects is highly desirable. This is an on-site position requiring daily field presence. The role involves outdoor work in varying conditions and flexibility to accommodate night shifts and occasional weekend assignments based on project requirements. Responsibilities • Perform field inspections on highway, bridge, airport, and transportation infrastructure construction projects, • Monitor contractor activities to ensure compliance with project plans, specifications, safety requirements, and quality standards, • Read and interpret engineering plans, drawings, specifications, and contract documents, • Prepare daily inspection reports, field documentation, and project records, • Assist with Office Engineer responsibilities, including reviewing construction documentation and coordinating project information, • Coordinate with Resident Engineers, project managers, contractors, and client agencies, • Support materials testing, quality assurance, and project closeout documentation as required, • Work on-site daily, with availability for night shifts, overtime, and occasional weekends based on project schedules Qualifications • Bachelor's degree in Civil Engineering required, • Ability to read and interpret construction plans, drawings, specifications, and technical documents, • Strong written, verbal, and interpersonal communication skills, • Strong attention to detail and problem-solving skills, • Willingness to work outdoors in an active construction environment, • Valid driver's license with reliable transportation, • Ability to work flexible hours, including nights, overtime, and occasional weekends as project needs requirePreferred Qualifications, • Internship, co-op, or up to two (2) years of experience supporting transportation, highway, bridge, airport, or heavy civil infrastructure projects, • Exposure to construction inspection, field engineering, materials testing, or office engineering, • OSHA 10 certification, • NJACI (New Jersey ACI Concrete Certification), • NJSAT (New Jersey Subsurface Aggregate Technician), • NICET Level I, II, or III certification, • Traffic Control Coordinator (TCC) certification, • Certified Construction Technologist (CCTC) certification BenefitsPay Transparency: The base salary (or hourly rate) range for this role is indicated in the posting. This range reflects the company’s good faith estimate of the compensation for this position at the time of posting. Final compensation will be determined based on factors such as experience, skills, qualifications, internal equity, and geographic location. Artheon offers a competitive compensation package including medical, prescription, dental and vision coverage, 401(k) retirement plan with employer match, educational assistance program and paid time off/parental leave.

Job Description Employment Type: Full-Time FSLA: Salary/Exempt Division: Project Management Department: Project Management Reports to: Senior Project Manager / Project Executive / Director, Project Executive Supervisory Duties: Yes Salary Range: $78,000 - $86,000 The Project Engineer (PE) will be primarily responsible for obtaining, distributing and reporting on critical project information to the project stakeholders. In this role, the PE will coordinate with subcontractors, vendors and consultants. The PE is the on-site expert on the status of submittals, Request for Information (RFIs), materials, safety documentation, drawing updates, and all other relevant project documents. PEs participate in the Consigli Project Engineer Academy, a year-long program designed to give our PEs a leg up in the industry through expert training and continuous development. Through this program, new PEs will gain pertinent industry knowledge and skills while also building their network within Consigli through interactive group activities. Responsibilities / Essential Functions • Document Control – Ensure timely and accurate management of all project documentation:, • Distribute all design changes/updates to the entire project team and all subcontractors., • RFIs: Prepare and submit requests for information to the design team and distribute all responses to the appropriate parties., • Submittals: Create and manage the submittal log for the project. Obtain required submittals from subcontractors, review for compliance with the specifications and submit to the design team for review via Procore system software., • Safety Documentation: Upload subcontractor safety documentation to Procore. Notify subcontractors of missing paperwork and follow up until it is provided. Conduct safety walk-throughs with Superintendent and Safety Manager., • Enrollment, and compliance tracking of subcontractor insurance certificates., • Field Reporting: Ensure field activities are tracked and reported to related parties., • Punch List: Upload and distribute the punch list through Procore to subcontractors. Assist with coordinating work completion as required and maintain an accurate log of items to be completed., • Observations and Field Reports: work with project team to conduct field walks as necessary and compile any corresponding documentation accordingly. Review Design Team field reports and work with required parties to resolve open items and drive resolution., • Safety: perform regular safety walks with field and safety staff and record observations., • Photos: track project progress with photos of the job site on a regular basis. Photos shall be tagged and uploaded to Procore., • Material Delivery: Thorough knowledge of anticipated delivery dates for materials and equipment to the site., • Create, update and maintain an accurate material delivery log for all materials and equipment on the project., • Obtain current information from subcontractors on a consistent basis regarding the status of their materials and when they are expected onsite., • Ensure timely communication of potential delays to the entire project team., • Understand and communicate long lead item impacts to the design team during the submittal review process and request expediting of submittal review where required., • Material verification on-site: confirm the delivered material corresponds to the submitted material to avoid potential field issues., • Project Meetings:, • Generate and update agendas for the various project meetings with input from the project team., • Track project meeting commitments and action items and distribute minutes to project stakeholders in a timely manner., • Reporting: report on, at a minimum, submittals, RFI’s and critical project issues., • Coordinate and support pre-job and subcontractor safety and quality meetings., • Collaboration and Coordination:, • Interface with client and design team throughout the entire project., • Develop relationships with all stakeholders on the project., • Collaborate with the other team members in establishing and implementing project goals., • Management and inventory of job site office consumables., • Communicate with subcontractors on a daily basis. Key Skills • Strong ability to work within a team environment., • Persistence and strong initiative., • Excellent organizational skills, • Time management/prioritization., • Strong communication skills (written and oral)., • Flexibility and willingness to learn., • Critical thinking and desire to solve problems. Required Experience • A bachelor's degree in engineering, Construction Management or Architecture preferred., • Prior internship experience is a plus., • Basic understanding of construction including schedule logic, budgets and project documentation., • Microsoft Office proficiency is required., • OSHA 10 Hour and OSHA 30 preferred., • Additional experience may include cost management software (Timberline, Sage preferred), scheduling software (Primavera P6 preferred) and construction management software (Procore preferred).

Job DescriptionDescriptionAbout ArtheonArtheon is a trusted engineering and consulting firm offering services that rival large organizations while maintaining the personalized client relationships of a boutique firm. With expertise spanning civil/site engineering, environmental permitting, transportation infrastructure, construction management, and advanced surveying technologies, we are committed to delivering high-quality, timely solutions to local, state, and federal clients. We are seeking fresh engineering graduates to support transportation and infrastructure construction projects across highways, bridges, and airports. The successful candidate will perform field inspection and office engineering duties, including interpreting construction plans and specifications, overseeing materials testing, reviewing documentation, and preparing reports. Experience with NJDOT or NJ Turnpike Authority projects is highly desirable. This is an on-site position requiring daily field presence. The role involves outdoor work in varying conditions and flexibility to accommodate night shifts and occasional weekend assignments based on project requirements. Responsibilities • Perform field inspections on highway, bridge, airport, and transportation infrastructure construction projects, • Monitor contractor activities to ensure compliance with project plans, specifications, safety requirements, and quality standards, • Read and interpret engineering plans, drawings, specifications, and contract documents, • Prepare daily inspection reports, field documentation, and project records, • Assist with Office Engineer responsibilities, including reviewing construction documentation and coordinating project information, • Coordinate with Resident Engineers, project managers, contractors, and client agencies, • Support materials testing, quality assurance, and project closeout documentation as required, • Work on-site daily, with availability for night shifts, overtime, and occasional weekends based on project schedules Qualifications • Bachelor's degree in Civil Engineering required, • Ability to read and interpret construction plans, drawings, specifications, and technical documents, • Strong written, verbal, and interpersonal communication skills, • Strong attention to detail and problem-solving skills, • Willingness to work outdoors in an active construction environment, • Valid driver's license with reliable transportation, • Ability to work flexible hours, including nights, overtime, and occasional weekends as project needs requirePreferred Qualifications, • Internship, co-op, or up to two (2) years of experience supporting transportation, highway, bridge, airport, or heavy civil infrastructure projects, • Exposure to construction inspection, field engineering, materials testing, or office engineering, • OSHA 10 certification, • NJACI (New Jersey ACI Concrete Certification), • NJSAT (New Jersey Subsurface Aggregate Technician), • NICET Level I, II, or III certification, • Traffic Control Coordinator (TCC) certification, • Certified Construction Technologist (CCTC) certification BenefitsPay Transparency: The base salary (or hourly rate) range for this role is indicated in the posting. This range reflects the company’s good faith estimate of the compensation for this position at the time of posting. Final compensation will be determined based on factors such as experience, skills, qualifications, internal equity, and geographic location. Artheon offers a competitive compensation package including medical, prescription, dental and vision coverage, 401(k) retirement plan with employer match, educational assistance program and paid time off/parental leave.