Trabajos electrical helper en Hoboken, New JerseyCrear alertas

Job Description Job Title: Heating and Air Conditioning (HVAC) Maintainer Location: Various Full/Part Time: Full-Time Regular/Temporary: Regular Job Information: Last Date of Filing: Until Filled Authority: New York City Transit (TA) Department: Subway Division/Unit: Infrastructure Reports to: Maintenance Supervisor Work Location: Various Hours of Work: Various *This is a civil service position. Selected candidates must pass a civil service exam and be appointed from the resulting list to gain permanent status. Compensation: Salary Range: The current minimum salary for Heating and Air Conditioning Maintainer is $37.16 per hour for a 40-hour week increasing to $43.72 per hour in the sixth year of service. These rates are subject to change. The benefits of this position include, but are not limited to, night and weekend salary differentials, paid holidays, vacation and sick leave, a comprehensive medical plan and a pension plan. Responsibilities: Heating and Air Conditioning Maintainers, under supervision, maintain, install, inspect, test, alter, and repair heating and air conditioning systems and equipment of MTA New York City Transit structures, such as shops, stations, and buildings. They work on air conditioners and components, such as compressors, condensers, evaporators, fans, motors, electrical and electronic controls and valves. They work on boilers, furnaces and components, such as boiler sections, heaters, radiators, piping, pumps, motors, and electrical and electronic controls and valves. They solder and braze, keep records, write reports, and perform related work. Some of the physical activities performed by Heating and Air Conditioning Maintainers and environmental conditions experienced are: loading and driving light utility trucks; lifting equipment weighing up to 75 pounds; lifting equipment overhead; climbing and descending ladders; working at heights of up to 50 feet; crouching to reach equipment being repaired; making visual inspections of equipment; distinguishing colored wiring; and reading blueprints and schematics. Special Working Conditions: Heating and Air Conditioning Maintainers may be required to work various shifts including nights, Saturdays, Sundays and holidays. Education and Experience Requirements: You must meet one the following requirements: 1. Successful completion of a four-year, full-time apprenticeship in the construction, repair and maintenance of air conditioning and/or heating systems recognized by the New York State Department of Labor, the U.S. Department of Labor; or any apprenticeship council that is recognized by the U.S. Department of Labor; or, 2. Three years of full-time satisfactory experience at the journey level (i.e., fully-trained, knowledgeable, proficient and competent mechanic) in the installation, repair, and maintenance of industrial, commercial, or domestic air conditioning units, or commercial refrigeration equipment, or heating systems in buildings, and the electrical controls and wiring for such equipment; or, 3. Two years of full-time satisfactory experience at the journey level as described in paragraph “2.” above, plus completion of one of the following listed below before obtaining your journey-level experience: a. Two years of full-time satisfactory experience performing work described above in “2” as a mechanic’s helper, apprentice or trainee; or b. Graduation from a recognized trade school or technical school, with a major course of study in electromechanical, electrical or electronic technology, or a closely related field totaling 600 hours; or c. Graduation from a vocational high school, with a major course of study in electro-mechanical, electrical or electronic technology, or a closely related field; or d. An associate degree or a higher-level degree, from an accredited college or university with a major course of study in electro-mechanical, electrical or electronic technology, or a closely related field. If you have qualifying part-time experience, it will be credited on a prorated basis. The vocational high school, technical school, or trade school must be approved by a State’s Department of Education or a recognized accrediting organization. The college or university must be accredited by regional, national, professional or specialized agencies recognized as accrediting bodies by the U.S. Secretary of Education, and by the Council for Higher Education Accreditation (CHEA). How to Apply: If you meet the License Requirements above, you can submit an online application by clicking on the "APPLY NOW" button from either the CAREERS page or from the JOB DESCRIPTION page. If you have previously applied online for other positions, enter your Username and Password. If it is your first registration, click on the CLICK HERE TO REGISTER hyperlink and enter a User Name and Password; then click on the REGISTER button. Selection Method / Admission Letter: Candidates may be asked to complete an education and experience test paper and also participate in one or more of the following assessments: written, practical skills and/or structured interview. Applicants must keep their contact information (email, mailing, phone) up to date. The contact information you entered in your online profile with the MTA will be used to contact you. You can update your address and other contact information.by logging into your MTA profile or by sending an email to examsunit@nyct.com. Requirements to be Appointed: Driver License Requirement: At the time of appointment, you must have a Motor Vehicle Driver License valid in the State of New York with no disqualifying restrictions that would preclude the performance of the duties of this title. If you have serious moving violations, a license suspension or an accident record you may be disqualified. This license must be maintained for the duration of your employment in the title. Drug Screening Requirement: You must pass a drug screening in order to be appointed. Residency: New York City residency is not required for this position. English Requirement: You must be able to understand and be understood in English to perform the duties and responsibilities of the position. Proof of Identity: Under the Immigration Reform and Control Act of 1986, you must be able to prove your identity and your right to obtain employment in the United States prior to employment with MTA Bus Company. Additional Information Training: You may be required to undergo a formalized training course during your probationary period. Failure to successfully complete the training course may result in termination. Probationary Period: You will be required to complete a probationary period. If you do not successfully complete the probationary period, you may be terminated. Equal Employment Opportunity: MTA is an Equal Opportunity Employer, including veteran status and individuals with disabilities. The MTA encourages qualified applicants from diverse backgrounds and experiences, including military service members, to apply.

Job DescriptionDescription: Description Controlled Combustion is the leading commercial heating contractor in NYC. We serve a variety of industries, including luxury apartments, hospitals, universities, commercial buildings, and more. With over 150 employees, our team is as diverse as the services we offer. We are looking for a Junior Commercial Heating Technician / Burner Helper to join our growing field service team. This position is a strong fit for someone with mechanical ability and some hands-on experience in HVAC, heating, electrical work, facilities maintenance, plumbing, pipefitting, auto/diesel repair, or another related mechanical trade. It is designed for someone who wants to build a long-term career in commercial heating service. This is not a senior technician position. It is a hands-on field role for someone who is dependable, eager to learn, comfortable using tools, and willing to work alongside experienced technicians while developing the skills needed to service commercial gas and oil burners, boilers, controls, and related electrical systems. Qualified candidates may have the opportunity for Local Union 638-B enrollment as they develop in the role. Responsibilities • Assist senior technicians with the service, maintenance, troubleshooting, and repair of commercial gas and oil burners., • Learn how to work on atmospheric boilers, condensing boilers, Scotch marine fire tube boilers, and related commercial heating equipment., • Assist with diagnosing combustion issues, open limits, electrical problems, control issues, and related service calls., • Use hand tools, electrical meters, combustion gas analyzers, and other field service equipment under supervision., • Help maintain clean, organized work areas, vehicles, tools, and equipment., • Follow instructions carefully and ask questions when additional guidance is needed., • Communicate professionally with customers, dispatch, supervisors, and other technicians., • Complete service reports and job documentation accurately and on time., • Follow company safety procedures, customer site requirements, and industry best practices., • Participate in overtime, weekend work, and after-hours/on-call opportunities as training and qualifications progress. Benefits • 401(k), • Dental insurance, • Health insurance, • Paid time off, • Retirement plan, • Vision insurance, • Overtime opportunities, • Stable year-round commercial work, • Opportunity for advancement, • Hands-on training and long-term career growth, • Potential opportunity for Local Union 638-B enrollment for qualified candidates Schedule • Monday to Friday, • Overtime, • Weekends as needed, • After-hours/on-call opportunities as training and qualifications progress Supplemental Pay • Bonus opportunities, • Double time pay, • Overtime pay, • On-call premium pay, when applicable Experience Preferred • HVAC, heating, electrical, facilities maintenance, plumbing, pipefitting, auto/diesel, or related mechanical trade experience: 1 year preferred, • Commercial heating or boiler experience preferred, but not required, • Basic electrical troubleshooting experience preferred, • Experience using hand tools required, • Experience using meters or diagnostic tools is a plus, • Trade school or technical school background is a plus License / Certification • Driver’s License preferred Work Location • In person / field service throughout the New York Metropolitan areaRequirements: Qualifications / Skills • Strong mechanical aptitude and willingness to learn., • Interest in building a long-term career in commercial heating service., • Comfortable working with hand tools and learning field service equipment., • Basic understanding of electrical troubleshooting preferred., • Ability to follow instructions carefully and work under the direction of experienced technicians., • Reliable, punctual, dependable, and willing to work in the field., • Strong work ethic and professional attitude., • Good communication skills with customers, supervisors, dispatch, and other technicians., • Ability to complete basic service documentation accurately., • Willingness to learn about gas and oil burners, boilers, combustion theory, controls, and electrical troubleshooting., • Willingness to work overtime, weekends, and participate in after-hours/on-call opportunities as experience grows. Minimum Education and Work Experience • High school diploma or equivalent preferred., • At least 1 year of hands-on experience in HVAC, heating, electrical, facilities maintenance, plumbing, pipefitting, auto/diesel, or another mechanical trade preferred., • Trade school, technical school, or related coursework is a plus., • Prior commercial heating, burner, boiler, or field service experience is a plus, but not required.

Job Description: NOW HIRING A MECHANIC FOR A FULL-TIME JOB OPPORTUNITY! STARTING HOURLY WAGE OF $28.00 BASED ON EXPERIENCE! Our mission of providing care to the world at a moment's notice is at the heart of everything we do. We are caregivers, first and foremost and we will be there when you need us. With more than 38,000 employees, Global Medical Response teams deliver compassionate, quality medical care, primarily in the areas of emergency and patient relocation services around the world. We provide end-to-end medical transportation as well as fire services, integrated healthcare solutions and disaster response. JOB SUMMARY Entry level position: Performs light duty repairs on AMR fleet vehicles, assist senior mechanics and provides logistical support as assigned ESSENTIAL FUNCTIONS/DUTIES • Performs Light mechanical and electrical repairs on AMR vehicles., • Responds to vehicle breakdowns in the field when requested., • Provides logistical support for the department. Assists Front Line Mechanics as needed., • Operates company vehicles in accordance with company policy and safe, • practices., • Completes all required paperwork and documentation neatly, correctly, and on time using AMR repair orders., • Uses maintenance data base to document all completed tasks / job assignments., • Attend all mandatory Fleet related training., • Adhere to all company policies and procedures., • Adherence to and compliance with information systems security is everyone’s responsibility. It is the responsibility of every computer user to: Know and follow Information Systems security policies and procedures. Attend Information Systems security training, when offered. Report information systems security problems., • Vehicles repaired correctly and in a timely fashion., • Responds to changing departmental priorities., • Quickly respond, diagnose and repair vehicles during road call situations., • Maintain safe and clean work area., • Documentation complete and neat., • Accurately account for all parts and materials., • Maintain good working relationship with all personnel and professional conduct with outside contacts., • Excellent customer service skills. QUALIFICATIONS Education/Licensing/Certification: Must have a current valid driver’s license. • Must have a High school diploma, or equivalent education., • 1 years verifiable Line Mechanic or Mechanic Helper / Associate experience., • 2 ASE Certifications (Truck or Automotive series). Preferably Brake and Steering / Suspension., • MACS AC Certification or equivalent ASE Certification., • Basic set of personal tools. Experience: • Ability to prioritize multiple tasks., • Ability to work independently and as a team member., • Ability to employ discretion and confidentiality in sensitive areas., • Ability to read, interpret, and follow instructions on memos, letters, various documents and repair manuals., • Ability to perform the essential job functions., • Regular and predictable attendance., • Basic automotive knowledge and skills necessary to perform maintenance and repairs on company vehicles., • Must have a full set of personal tools. | Job Description : GUIDING VALUES AND BEHAVIORSEmployee must consistently exhibit our guiding principles: • Patient Care - We continually earn the privilege to care for our patients. It is at the forefront of everything we do., • One Team - We respect each other and achieve together what no individual can alone., • Innovation - We are driven to develop solutions that inspire progress., • Vigilance - We will never waver in our commitment to safety and preparedness in the fulfillment of our duties., • Ownership - We are accountable for what we do and take pride in how we do it., • Citizenship - We are dedicated to being good stewards in the communities we serve. REPORTING RELATIONSHIPS Reports to: Fleet Manager Interrelationships: Operations, and other support departments ns at _. _. EEO Statement: Global Medical Response and its family of companies are an Equal Opportunity Employer, which includes supporting veterans and providing _for individuals with a disability. More Information about this Job: Check out our careers site _ to learn more about our benefit options.

Job Description Job Title: Electrician Job Description We are seeking a skilled electrician to perform electrical work on various commercial projects throughout New Jersey. This role involves working on diverse tasks that require expertise in electrical systems and installations. Responsibilities • Execute electrical work on commercial projects across New Jersey., • Install and layout conduits using EMT, PVC, and ENT methods., • Perform under slab concrete work and layout conduits., • Conduct switch and plugging, panel work, and switchboard installations., • Install and maintain fire alarm systems., • Read and interpret blueprints effectively., • Pull wires and perform pipe work efficiently. Essential Skills • Proficiency in conduit installation and cable pulling., • Ability to read and interpret blueprints., • 2 to 10 years of experience as a helper or mechanic in commercial settings., • Experience with hi-rise projects is a plus. Additional Skills & Qualifications • Experience with commercial electrical projects is required., • Knowledge of electrical systems and equipment. Why Work Here? Join a dynamic team that values expertise and provides opportunities to work on diverse commercial projects. Benefit from a supportive environment that encourages skill development and offers chances to work on challenging and rewarding projects. Work Environment The role involves working on commercial projects throughout New Jersey, requiring adaptability and a focus on safety. The work environment is dynamic, with tasks varying based on project needs. Expect to work with various electrical technologies and equipment, ensuring installations meet industry standards. Job Type & Location This is a Contract to Hire position based out of Jersey City, NJ. Pay and Benefits The pay range for this position is $22.00 - $36.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Jersey City,NJ. Application Deadline This position is anticipated to close on Sep 30, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Job Description Job Title: Light Maintainer Location: Various Full/Part Time: Full-Time Regular/Temporary: Regular Job Information: Last Date of Filing: Until Filled Authority: New York City Transit (TA) Department: Subway Division/Unit: Infrastructure Reports to: Maintenance Supervisor (Lighting) Work Location: Various Hours of Work: Various *This is a civil service position. Selected candidates must pass a civil service exam and be appointed from the resulting list to gain permanent status. **Incumbents who are permanently employed in the title of Transit Electrical Helper working in Lighting Maintenance for at least one year are eligible to be promoted on a provisional basis. Compensation: The current minimum salary for Light Maintainer is $37.16 per hour for a 40-hour week increasing to $43.72 per hour in the sixth year of service. These rates are subject to change. The benefits of this position include, but are not limited to, night and weekend salary differentials, paid holidays, vacation and sick leave, a comprehensive medical plan and a pension plan. Responsibilities: Light Maintainers, under supervision, install, inspect, test, alter, maintain, and repair lighting and other electrical systems in MTA New York City Transit facilities, such as subway tunnels and elevated structures, bus depots and repair shops, subway car yards and barns, and other MTA New York City Transit buildings and structures; keep records; drive motor vehicles; and perform related work. Some of the physical activities performed by Light Maintainers and environmental conditions they experience are: working on or near train tracks where live high voltage equipment is present; working outdoors in all weather conditions; using ladders to climb onto and off trackways; hearing warnings (bells, whistles, and vocal); working on elevated structures; driving, loading, and unloading trucks; and lifting heavy material and equipment. Special Working Conditions: Light Maintainers may be required to work various shifts including nights, Saturdays, Sundays and holidays. How to Qualify: Internal Candidates: This position is open to each employee of MTA New York City Transit that by the first date of the assessment, is permanently (not provisionally) employed in the title of Transit Electrical Helper working in Lighting Maintenance for not less than one year; and is not otherwise ineligible. OR External Candidates and MTA Employees who are not employed in the eligible title listed above: When you apply, you must meet the following requirements: 1. Completion of a four-year full-time apprenticeship in the electrical, electronic, or electro-mechanical trade recognized by the New York State Department of Labor, the U.S. Department of Labor, or any state apprenticeship council that is recognized by the U.S. Department of Labor; or, 2. Three years of electrical experience installing, maintaining, and repairing lighting systems, conduit work, wiring, and fixtures. At least two years must be at the journey-level. One year of non-journey level experience may be substituted with education as follows: a. Graduation from a trade school or technical school with a major course of study in electrical, electronic, or electro-mechanical technology, or a closely related field, totaling a minimum of 600 hours; or b. Graduation from a vocational high school with a major course study in electrical, electronic, or electro-mechanical technology, or a closely related field; or c. Graduation from an accredited college or university with an AAS degree or higher in electrical, electronic, or electro-mechanical technology, or a closely related field. If you have qualifying part-time experience, it will be credited on a prorated basis. Some examples of unacceptable experience include: superintendent of residential or commercial buildings; electronic bench technician; repair of home appliances, such as refrigerators, stoves or vacuum cleaners; repair person of electronic equipment, such as office machines, personal computers or televisions; and salespersons of lighting products. The vocational high school, technical school, or trade school must be approved by a State’s Department of Education or a recognized accrediting organization. The college or university must be accredited by regional, national, professional or specialized agencies recognized as accrediting bodies by the U.S. Secretary of Education, and by the Council for Higher Education Accreditation (CHEA). How to Apply: If you meet the Education and Experience Requirements above, you can submit an online application by clicking on the "APPLY NOW" button from either the CAREERS page or from the JOB DESCRIPTION page. If you have previously applied online for other positions, enter your Username and Password. If it is your first registration, click on the CLICK HERE TO REGISTER hyperlink and enter a User Name and Password; then click on the REGISTER button. Selection Method / Admission Letter: Candidates may be asked to complete an education and experience test paper and also participate in one or more of the following assessments: written, practical skills and/or structured interview. Applicants must keep their contact information (email, mailing, phone) up to date. The contact information you entered in your online profile with the MTA will be used to contact you. You can update your address and other contact information.by logging into your MTA profile or by sending an email to examsunit@nyct.com. Requirements to be Promoted or Appointed: Driver License Requirement: At the time of promotion or appointment, you must have a motor vehicle driver license valid in the State of New York. If you have serious moving violations, a license suspension or an accident record, you may be disqualified. You must obtain a Learner Permit for a Class B Commercial Driver License (CDL) within 90 days of promotion or appointment. You must obtain a Class B CDL valid in the state of New York to satisfactorily complete the probationary period. The Class B CDL may not have any restrictions which would preclude the performance of the duties of a Light Maintainer, and must be maintained for the duration of your employment in the title. Commercial Motor Vehicle Driving Experience in the Military or New York National Guard: If you are an active member or former member (discharged in the past year) of the military or New York National Guard and have experience driving a Commercial Motor Vehicle in the military or New York National Guard, you may be eligible for a waiver of the New York State commercial driving skills test through the New York State Department of Motor Vehicles. If you believe that you may be eligible for this waiver, you must apply for the waiver through the New York State Department of Motor Vehicles. Drug Screening Requirement: You must pass a drug screening in order to be promoted or appointed, and if promoted or appointed, you will be subject to random drug and alcohol tests for the duration of your employment. Additionally, if you have tested positive on a drug or alcohol test or had a refusal to test during pre-employment or while employed by a Federal DOT-regulated employer during the applicable period, you must have completed the Substance Abuse Professional (SAP) evaluation, referral and education/treatment process required by federal law in order to be promoted or appointed to this safety-sensitive position. Medical Requirement: Medical guidelines have been established for the position of Light Maintainer. You will be examined to determine whether you can perform the essential functions of the position. Where appropriate, a reasonable accommodation will be provided for a person with a disability to enable them to perform the essential functions of the job. Residency: New York City residency is not required for this position. English Requirement: You must be able to understand and be understood in English to perform the duties and responsibilities of the position. Proof of Identity: Under the Immigration Reform and Control Act of 1986, you must be able to prove your identity and your right to obtain employment in the United States prior to employment with MTA Bus Company. Additional Information Training: You may be required to undergo a formalized training course during your probationary period. Failure to successfully complete the training course may result in termination or a return to your previously held permanent title. Probationary Period: You will be required to complete a probationary period. If you do not successfully complete the probationary period, you may be terminated or returned to your previously held permanent title. Equal Employment Opportunity: MTA is an Equal Opportunity Employer, including veteran status and individuals with disabilities. The MTA encourages qualified applicants from diverse backgrounds and experiences, including military service members, to apply.

Job Description Title: M of E - Electrician Department: Maintenance of Equipment Repost Date: 1/5/2026 Close Date: Open Until Filled 100% Hourly Rate of Pay: $42.601*(See Wage Progression Table) Position Classification: Safety Sensitive Location: Various Reports To: Various Union Affiliation: International Brotherhood of Electrical Workers (IBEW) Summary Responsible for troubleshooting equipment. Responsibilities Responsibilities may include but are not limited to: • Inspect, maintain, repair and install electrical components such as armatures, generators, inverters/converters, motor alternators, regulators, traction motors, switchboards, lighting fixture, magnet coils, jumpers, batteries, printed circuit cards, inside and outside wiring at shops, buildings and yards, and conduct work on any and all rolling stock equipment, support shop equipment or plant equipment., • Move cars within Maintenance of Equipment territory. Will be required to learn and troubleshoot defects using the Automatic Train Control System. • Maintain HVAC (Heating, Ventilation and Air Conditioning) systems, which includes but is not limited to freon handling. Qualifications • A four-year high school diploma or its educational equivalent (GED or TASC) approved by a State's Department of Education or recognized accredited organization., • Must possess a minimum of four years electrical experience. Related electrical trade school accreditation and work experience may comprise the required four years' experience., • Must possess the ability to trouble-shoot equipment., • Must possess mechanical ability and ability to use various electrical meters and testing devices., • Must possess ability to read wiring schematic diagrams., • Must possess knowledge of relay logic. Wage Progression: Wage Progression for New Employees hired after 9/24/2014: Rate: $40.449 is the 100% hourly rate of pay. 70% - 1st 240 days of compensated service. 70% - 2nd 240 days of compensated service. 75% - 3rd 240 days of compensated service. 80% - 4th 240 days of compensated service. 90% - 5th 240 days of compensated service. 90% - 6th 240 days of compensated service. 95% - 7th 240 days of compensated service. 100% - After 1,680 days of compensated service. Current employee wage progression (hired on or before 9/24/2014): Rate: $40.449 is the 100% hourly rate of pay. 70% - 1st 240 days of compensated service. 75% - 2nd 240 days of compensated service. 80% - 3rd 240 days of compensated service. 90% - 4th 240 days of compensated service. 95% - 5th 240 days of compensated service. 100% - After 1,200 days of compensated service. Note: Consistent with Rule 67B of the IBEW Agreement, in the case of a transfer into the craft, employees will be subject to enter the wage progression at the 70% rate. However, candidates who meet one or more of the criteria listed below will qualify for the expedited wage progression for Journeymen: • Four years of full-time experience as an electrical worker, including the following jobs and titles and industries, • Electrical, Electronics or Communications Worker in the Armed Forces, • Electrician, including commercial, residential, and low voltage, • Utility or Power Plant Electrical Worker, • Electronics, Communications or Computer Technician/Engineer, • Electrical Apprentice or Electrical Helper, • Automotive Electronic Technician, with ASE certification, • Possess or completion of the following educational degrees, apprenticeships or trade program certifications, with required practical work experience accompanied thereto for a total of four years:, • A four-year bachelor’s degree in electrical engineering, Electrical Technology or associated Electrical field from an accredited college or university., • A two-year associate’s degree in electrical engineering, Electrical Technology or associated Electrical field from an accredited college plus two years of full-time experience performing electrical work., • A trade (vocational) school certificate n Electrical Technology or associated electrical field, of which completion requires at least one year of classroom training; plus three years of full-time experience as an electrical worker., • Completion of at least four years of an Electrical Apprenticeship Program., • Completion of at least two years of a full-time Electrical Apprenticeship Program, plus two years of full-time experience as an electrical worker. Wage Progression: First 365 Calendar Days: 80% Second 365 Calendar Days: 85% After 730 Calendar Days: 100% Other Information In addition to meeting the minimum requirements of the position, the selection process may include, but is not limited to, a pre-screening assessment (i.e., physical, written and/ or practical evaluation) and interview. Candidates forfeit further consideration in the process if they fail to participate in any step of the process when scheduled. Make up dates/times will not be given. In addition, LIRR employee applicants must be in their current position for the 12 months immediately preceding the close date of this posting and must possess a satisfactory work history, including attendance and discipline record. A record of more than ten sick days without medical documentation in two of last three years is considered unsatisfactory attendance. Not all qualified applicants are guaranteed an interview due to the competitive selection process. A medical examination and safety sensitive drug/alcohol test may also be required. Equal Opportunity Employment MTA and its subsidiary and affiliated agencies are Equal Opportunity Employers, including with respect to veteran status and individuals with disabilities. The MTA encourages qualified applicants from diverse backgrounds, experiences, and abilities, including military service members, to apply.

Job Description Yotel New York is seeking to hire a motivated and experienced Helper to join our engineering team. The Helper will be responsible for the hotel guest calls, operating, maintaining, and repairing heating, ventilation, air conditioning and other equipment. The Helper is expected to demonstrate technical expertise in HVAC, plumbing, electrical, fire/life safety, and hot water symptoms. Engineering Helper is responsible for maintaining health and safety standards while creating a welcoming environment for our hotel guests.

Job DescriptionBenefits: • Competitive salary, • Opportunity for advancement, • Training & development Bath Tune-Up Bloomfield is growing fast, and we’re looking for a reliable, hardworking Helper to support our Lead Bath Installer on bathroom remodeling projects across Essex County. This is hands-on work—ideal for someone who wants steady hours, strong training, and a path into the skilled trades. Role Overview You’ll assist our experienced installers with demolition, prep work, material handling, installation support, and clean-up. You’ll learn modern remodeling techniques, contribute to high-quality projects, and help deliver a 5-star customer experience. Key Responsibilities • Basic Tiling, • Assist with demolition, debris removal, and jobsite prep, • Carry, stage, and organize materials, tools, and equipment, • Support installation of flooring, vanities, fixtures, wall systems, and shower conversions, • Help set up waterproofing, substrates, and basic plumbing/electrical prep (under supervision), • Measure, cut, and prep materials as directed, • Keep jobsite clean, safe, and customer-ready at all times, • Communicate clearly with the Lead Installer and Project Manager, • Follow all safety procedures and company standards, • Represent Bath Tune-Up professionally inside customers’ homes What We’re Looking For • Reliable, punctual, and eager to learn, • Basic knowledge of hand tools and power tools, • Comfortable doing physical work—lifting, bending, carrying, • Positive attitude and ability to follow direction, • Valid driver’s license preferred, • Prior construction, handyman, moving, or labor experience Compensation & Benefits • Opportunities for growth into Installer roles, • Bonus opportunities, • Supportive, non-toxic work environment About Us Bath Tune-Up Bloomfield is a locally owned, fast-growing remodeling company backed by a national brand. We deliver high-quality bathroom transformations with a trained in-house team—no subcontractors. You’ll be part of a company that values craftsmanship, professionalism, and growth.

Job Title: Environmental Services Specialist \n \n Department: Facilities Management \n \n PLEASE NOTE: This is a facilities maintenance and physical labor position. It is not a scientific, research, laboratory research, data, or data analytics role. \n \n Applicants should review the position responsibilities carefully before applying. Please submit an application only if your experience and career interests align with facilities maintenance and hands-on physical work. \n \n About The New York Academy of Medicine: \n \n For over 178 years, New York Academy of Medicine has been a driving force for progress, helping transform the landscape of health through independent thinking, rigorous research, and dynamic collaboration. Our mission reaches beyond the boundaries of conventional institutions; we champion a future where every person — no matter their background or circumstance — has what they need to live a healthier, longer life. \n \n True transformation happens when diverse perspectives unite with a shared vision. We bring together grassroots advocates, global leaders, clinicians, policymakers, researchers, and community voices in purposeful partnership. Our work is grounded in evidence and resonates with human experience. We consistently turn ideas into action, accelerating the adoption of innovations that advance health equity far beyond New York’s borders. \n \n Position Summary/Overview: \n \n Reporting to the Facilities Manager, the Environmental Services Specialist will be responsible for: \n \n\n • Overall cleanliness and repair of all items on specified floors of the building (cleaning will consist of all offices, common areas, restrooms, and event spaces)\n, • Maintaining the general cleanliness of all buildings and grounds, including front of building and doors\n, • Inspection of any light fixtures that are out and replace any bulbs, etc.\n, • Assisting in setting up and coordinating set-up and clean-up for all meetings and special events, including lifting tables and placing chairs.\n, • Assisting with delivery of furniture and supplies to the building.\n, • Accommodating staff requests for maintenance services as instructed by supervisor\n, • Removal of all trash as directed\n, • Performing light carpentry, electrical, plumbing and other assistant handyman helper tasks as required\n, • Other duties as assigned.\n\n \n The ideal candidate will practice care in the maintenance of the facility and take pride in their work; recognize the contributions of others and collaborate effectively within and outside of the department; communicate well with others and listen effectively to their ideas; be flexible, enthusiastic, and persistent in overcoming obstacles; demonstrate ability to think and act independently while exercising good judgment; take initiative to solve problems; and have a desire to expand knowledge and develop professionally. \n \n Qualifications: \n \n\n • Working knowledge of policies and procedures relevant to the job function\n, • A familiarization with local, state, and federal regulations governing buildings in NYC or an ability to acquire such knowledge\n, • 2-5 years of maintenance staff experience required\n, • High School Diploma or equivalent required\n, • Ability to work flexible hours\n, • Ability to work outside in all weather conditions\n\n \n Physical Demands: \n \n The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is frequently required to stand, walk, sit, handle or feel for objects, tools, or controls, reach with hands and arms, speak, and hear. The employee is occasionally required to climb, balance, stoop, kneel, crouch, or crawl. The employee must frequently lift and/or move up to 50+ pounds. Specific vision abilities required by this job include close vision, and ability to adjust focus. \n \n Work Environment: \n \n The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate. \n \n This position is based in New York City and requires full-time on-site presence. It is a non-exempt, hourly position and is eligible for overtime pay and benefits. \n \n NYAM is an equal opportunity employer and does not discriminate against any employee or applicant for employment because of race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, gender identity, or any other protected status. NYAM is an affirmative action employer. As an organization whose primary focus is health equity, NYAM is committed to creating a diverse and inclusive environment for all employees. \n \n Application Process: Interested candidates should submit a resume and contact information for three references to EVSRecruitment@nyam.org. Applications will be reviewed on a rolling basis until the position is filled. \n \n Salary range: The salary range for this position is $18 to $20 per hour.

Job Description Full-Time Positions Available: • Sheet Metal Duct Shop Fabricator, • Sheet Metal Duct Installer (Tin Knocker) and or HELPER, • HVAC Service Technician/Mechanic, • Delivery Driver, • Bookkeeper (Office Worker) ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Sheet Metal Duct Shop Fabricator: We have a full operating sheet metal fabrication shop. We fabricate duct work for commercial and residential buildings. Responsibilities • Operate Plasma to cut 5'x10' sheets of metal., • Operate machines to cut, shape, and form sheet metal including roller, rotodie, shear, punch press, hand brake, weighting machine, plasma cutters, and more., • Drill and punch holes in metal, for electrical components, screws, bolts, or rivets., • Fasten seams and joints together with welds, bolts, cement, rivets, solder, caulks, metal drive clips, and bonds to assemble components into products or to repair sheet metal items., • Trim, file, grind, buff, and smooth surfaces, seams, and joints of assembled parts, using hand tools and portable power tools., • Finish parts, using hacksaws, and hand, rotary, or squaring shears., • Develop and lay out patterns that use materials most efficiently., • Insulate ductwork using glue & pinspotter., • Maintain equipment, making repairs and modifications when necessary. --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Sheet Metal Duct Installer (Tin knockers) Position: Responsibilities: • · Installation of a variety of Commercial HVAC equipment, • · Installation of a variety of HVAC DUCTWORK (round, spiral, rectangular), • · Sheet metal Fabrication in the field as necessary., • · Responsible for sheet metal measurements, sketching and ordering ductwork. Requirements: • · Reading and interpreting blueprints, • · To have a basic understanding of central air conditioning systems, • · Should be reliable, self-motivated, have the ability and knowledge to read specifications and Shop Drawings., • · Should possess good communication skills, • · Must be able to maintain a safe work area, • · Should also have a flexible attitude and should be willing to travel at any given point of time --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- HVAC Service Mechanic Position: Responsibilities: · Install new heating, ventilation, and air conditioning systems · Inspect and perform equipment repairs and replacements · Perform routine preventative maintenance · Respond to emergency maintenance requests · Adhere to all safety policies and procedures · Responsible for the installation of large mini-split systems, including refrigeration piping, pipe insulation, and control wiring · Perform start-up of newly installed HVAC systems · Perform Service repairs and troubleshooting diagnostics to existing HVAC systems · Perform in the field using related experience and knowledge of codes and specifications. Qualifications: · Previous experience in HVAC or other related fields (minimum of 5 years prior experience) · Familiarity with HVAC wiring diagrams · Ability to handle physical workload · Run Refrigeration piping · Strong problem solving and critical thinking skills · Qualified individuals most possess a full-range of mechanical knowledge · Ability to Navigate NYC Subway Systems Delivery Driver: • Looking for a driver to deliver Duct work and material to job sites daily., • When not making deliveries, driver will help fabricate duct work Education · Technical trade school diploma and training certificate is a plus · Minimum of 5 years’ experience in a commercial HVAC application and Ductwork installation • Helpers Minimum of 2 years' experience in commercial and or Residential · OSHA 30 hours \nCompany Description We've been in business for 40 + years and continue to grow each and every day. We're looking for highly motivated individuals to join the success of keeping New York City happy. We've been in business for 40 + years and continue to grow each and every day. We're looking for highly motivated individuals to join the success of keeping New York City happy.

Job DescriptionDescription:G-Net Construction is hiring a full-time Facility Maintenance Helper to support commercial facility maintenance, repair, and service work across NYC. This is a hands-on field position for someone who is reliable, willing to learn, and able to assist with day-to-day maintenance tasks in occupied commercial and institutional buildings. This role is best suited for someone who lives on Staten Island, has a valid driver’s license, communicates well, follows direction, works neatly, and wants to grow within a structured construction and facility maintenance company. Our maintenance work includes preventive maintenance, corrective repairs, emergency facility response support, plumbing and building systems assistance, drywall and painting support, electrical service call support, interior repairs, tenant space repairs, and general facility support. Responsibilities: • Assist maintenance technicians, carpenters, plumbers, electricians, painters, and other trades as needed., • Help with preventive maintenance, corrective repairs, and general facility service calls., • Load, unload, organize, and deliver tools, materials, and equipment., • Assist with drywall, painting, flooring, doors, hardware, ceiling, signage, cabinetry, and general interior repairs., • Assist with basic plumbing, drain cleaning, water heater, and building system support under supervision., • Assist with exterior and site-related maintenance support as directed., • Help set up work areas, protect occupied spaces, and maintain clean job site conditions., • Perform daily cleanup and keep tools, materials, vehicles, and work areas organized., • Follow directions from supervisors, lead mechanics, and office staff., • Communicate clearly regarding job status, materials needed, and field conditions. Required Qualifications: • Must live on Staten Island., • Must have a valid driver’s license., • Must be able to work on the books., • OSHA-40 required for NYC field work., • Must be reliable, punctual, and willing to learn., • Must communicate clearly and follow direction from supervisors., • Must work neatly and keep job sites organized., • Must be physically able to lift, carry, move materials, climb ladders, and perform field work., • Must have basic hand tools, including at minimum a tape measure, hammer, utility knife, tool belt, and basic hand tool set. Preferred Qualifications: • Prior construction, maintenance, laborer, helper, or handyman experience is a plus., • Basic carpentry, painting, drywall, plumbing, electrical, or repair experience is a plus., • Experience working in commercial, school, healthcare, nonprofit, senior care, or occupied buildings is a plus., • Ability to drive a company vehicle when needed is a plus., • Basic blueprint or work order reading is a plus. Growth Opportunity:This position offers room to grow for someone who is dependable, communicates well, takes pride in clean work, and wants to develop practical construction and facility maintenance skills. Motivated employees may have the opportunity to grow into higher-level maintenance, trade helper, mechanic, or lead roles over time. How to Apply:Please apply through our Field Positions page: https://www.gnetconstruction.com/field-positions/ Include your resume, desired hourly rate, years of experience, certifications, and examples of relevant construction, maintenance, repair, or facility service experience. Qualified candidates will be contacted for an in-person interview.

Job Description Job Description Job Title: Ventilation and Drainage Maintainer (Electric Fan & Pump Technician) Location: Various Full/Part Time: Full-Time Regular/Temporary: Regular Job Information: Last Date of Filing: Until Filled Authority: New York City Transit (TA) Department: Subway Division/Unit: Infrastructure Reports to: Maintenance Supervisor (Ventilation & Drainage) Work Location: Various Hours of Work: Various *This is a civil service position. Selected candidates must pass a civil service exam and be appointed from the resulting list to gain permanent status. **Incumbents who are currently employed in the title of Transit Electrical Helper in the Ventilation and Drainage Subdivision are eligible to be promoted on a provisional basis. Compensation: Salary Range: The current minimum salary for Ventilation and Drainage Maintainer is $37.16 per hour for a 40-hour week increasing to $43.72 per hour in the sixth year of service. These rates are subject to change. The benefits of this position include, but are not limited to, night and weekend salary differentials, paid holidays, vacation and sick leave, a comprehensive medical plan and a pension plan. Responsibilities: Ventilation and Drainage Maintainers, under supervision, maintain, install, clean, adjust, inspect, test, alter, replace and repair ventilation and drainage equipment of MTA New York City Transit subway stations and underground, surface, and elevated subway sections, including buildings, structures and yards; work on generators, motors, electro-mechanical relays, Programmable Logic Controllers (PLCs), limit switches, pumps, fans, valves, wiring, heaters, compressors, gasoline and diesel engines and sewage ejectors; drive motor vehicles, keep records, write reports, and perform related work. Some of the physical activities performed by Ventilation and Drainage Maintainers and environmental conditions experienced are: climbing and descending ladders and stairs to access pump, ejector and fan rooms; walking along subway tracks near live third rails and tripping hazards; clearing work areas in readiness for approaching trains; working in confined areas and wearing required apparatus (a safety harness, a lifeline and a Scott air pack) while working in those areas; lifting material weighing up to 50 pounds; performing work in a crouched position for long periods of time; and working outdoors in all kinds of weather Special Working Conditions: Ventilation and Drainage Maintainers may be required to work various shifts including nights, Saturdays, Sundays and holidays. How to Qualify: Internal Candidates: This position is open to each employee of MTA New York City Transit that by the first date of the assessment, is permanently (not provisionally) employed in the title of Transit Electrical Helper working in the Ventilation and Drainage Subdivision, and has been permanently employed in such title for not less than one year; and is not otherwise ineligible. OR External Candidates and MTA Employees who are not employed in the eligible title listed above: When you apply, you must meet the following requirements: 1. Successful completion of a four-year, full-time apprenticeship in the construction, repair and maintenance of pumps, fans, compressors and/or related electro-mechanical systems and equipment recognized by the New York State Department of Labor, the U.S. Department of Labor; or any apprenticeship council that is recognized by the U.S. Department of Labor; or, 2. Three years of full-time satisfactory experience at the journey level (i.e., fully-trained, knowledgeable, proficient and competent mechanic) in the installation, repair, and maintenance of heavy duty electro-mechanical equipment, such as pumps, fans, motors, compressors, sewage ejectors and/or related electro-mechanical equipment; or, 3. Two years of full-time satisfactory experience at the journey level as described in paragraph “2” above, plus completion of one of the following listed below before obtaining your journey-level experience: A. Two years of full-time satisfactory experience performing work described above in “2” as a mechanic’s helper, apprentice or trainee; or B. Graduation from a recognized trade school or technical school, with a major course of study in electro-mechanical, electrical or electronic technology, or a closely related field totaling 600 hours; or C. Graduation from a vocational high school, with a major course of study in electro-mechanical, electrical or electronic technology, or a closely related field; or D. An associate degree or a higher-level degree, from an accredited college or university with a major course of study in electro-mechanical, electrical or electronic technology, or a closely related field. If you have qualifying part-time experience, it will be credited on a prorated basis. The vocational high school, technical school, or trade school must be approved by a State’s Department of Education or a recognized accrediting organization. The college or university must be accredited by regional, national, professional or specialized agencies recognized as accrediting bodies by the U.S. Secretary of Education, and by the Council for Higher Education Accreditation (CHEA). How to Apply: If you meet the Qualification Requirements above, you can submit an online application by clicking on the "APPLY NOW" button from either the CAREERS page or from the JOB DESCRIPTION page. If you have previously applied online for other positions, enter your Username and Password. If it is your first registration, click on the CLICK HERE TO REGISTER hyperlink and enter a User Name and Password; then click on the REGISTER button. Selection Method / Admission Letter: Candidates may be asked to complete an education and experience test paper and also participate in one or more of the following assessments: written, practical skills and/or structured interview. Applicants must keep their contact information (email, mailing, phone) up to date. The contact information you entered in your online profile with the MTA will be used to contact you. You can update your address and other contact information.by logging into your MTA profile or by sending an email to examsunit@nyct.com. Requirements to be Promoted or Appointed: Driver License Requirement: At the time of promotion or appointment, you must have: • A Class A or Class B Commercial Driver License (CDL) valid in the State of New York with an endorsement for hazardous materials and no disqualifying restrictions that would preclude the performance of this title; or, • A Motor Vehicle Driver License valid in the State of New York and a Learner Permit for a Class B CDL valid in the State of New York with an endorsement for hazardous materials and no disqualifying restrictions. If you qualify under “2” above, your appointment will be subject to the receipt of the Class B CDL valid in the State of New York, with an endorsement for hazardous materials and no disqualifying restrictions within six months of appointment. If you have serious moving violations, a license suspension or an accident record, you may be disqualified. The Class B Commercial Driver License (CDL) with an endorsement for hazardous materials and no disqualifying restrictions must be maintained for the duration of your employment in the title. Such license and/or Learner Permit must not include any restrictions which would preclude the performance of Ventilation and Drainage Maintainer work. Commercial Motor Vehicle Driving Experience in the Military or New York National Guard: If you are an active member or former member (discharged in the past year) of the military or New York National Guard and have experience driving a Commercial Motor Vehicle in the military or New York National Guard, you may be eligible for a waiver of the New York State commercial driving skills test through the New York State Department of Motor Vehicles. If you believe that you may be eligible for this waiver, you must apply for the waiver through the New York State Department of Motor Vehicles. Drug Screening Requirement: You must pass a drug screening in order to be promoted or appointed, and if promoted or appointed, you will be subject to random drug and alcohol tests for the duration of your employment. Additionally, if you have tested positive on a drug or alcohol test or had a refusal to test during pre-employment or while employed by a Federal DOT-regulated employer during the applicable period, you must have completed the Substance Abuse Professional (SAP) evaluation, referral and education/treatment process required by federal law in order to be appointed to this safety-sensitive position. Medical Requirement: Medical guidelines have been established for the position of Ventilation & Drainage Maintainer. You will be examined to determine whether you can perform the essential functions of the position. Where appropriate, a reasonable accommodation will be provided for a person with a disability to enable them to perform the essential functions of the job. Residency: New York City residency is not required for this position. English Requirement: You must be able to understand and be understood in English to perform the duties and responsibilities of the position. Proof of Identity: Under the Immigration Reform and Control Act of 1986, you must be able to prove your identity and your right to obtain employment in the United States prior to employment with MTA Bus Company. Additional Information: Probationary Period: You will be required to complete a probationary period. If you do not successfully complete the probationary period, you may be terminated or returned to your previously held permanent title. Training: You may be required to undergo a formalized training course during your probationary period. Failure to successfully complete the training course may result in termination or a return to your previously held permanent title. Equal Employment Opportunity: MTA is an Equal Opportunity Employer, including veteran status and individuals with disabilities. The MTA encourages qualified applicants from diverse backgrounds and experiences, including military service members, to apply.

Three (3) years of full-time experience as an electrician and sufficient full-time experience as an electrician's helper or apprentice electrician or education in the electrical or electronic discipline acquired in an approved trade, technical school or vocational high school or college or universit

At least three years of full-time satisfactory experience as an electrician and sufficient full-time satisfactory experience as an electrician's helper or apprentice electrician or education in the electrical or electronic field acquired in an approved trade, technical school or vocational high scho

At least three years of full-time satisfactory experience as an electrician and sufficient full-time satisfactory experience as an electrician's helper or apprentice electrician or education in the electrical or electronic field acquired in an approved trade, technical school or vocational high scho

At least three years of full-time satisfactory experience as an electrician and sufficient full-time satisfactory experience as an electrician's helper or apprentice electrician or education in the electrical or electronic field acquired in an approved trade, technical school or vocational high scho

Choice Electric Service LLC in Georgia is seeking electrical helpers. The company is growing and seeks people willing to take on responsibilities and advance into supervision, while offering entry-level helpers a path to move up.

You will work with peers, assist in wiring and equipment installation, and participate in our in-house training programs to advance in the electrical industry.

Job Description Car Inspector/Road Car Inspector (Subway Car Mechanic) Last Date of Filing: Until Filled Authority: New York City Transit (TA) Department: Subways Division/Unit: Car Equipment Reports to: Maintenance Supervisor (Car Equipment) Work Location: Various Hours of Work: Various *This is a civil service position. Selected candidates must pass a civil service exam and be appointed from the resulting list to gain permanent status. **Incumbents who are currently employed in the title of Maintainer's Helper - Group B working in the Division of Car Equipment for at least one year are eligible to be promoted on a provisional basis. Compensation: The current minimum salary for Car Inspector is $38.80 per hour for a 40-hour work week increasing to $45.65 per hour in the sixth year of service. The current minimum salary for Road Car Inspector is $46.82 per hour for a 40-hour work week. These rates are subject to change. The benefits of this position include, but are not limited to, night and weekend salary differentials, paid holidays, vacation and sick leave, a comprehensive medical plan and a pension plan. Responsibilities: Car Inspectors, under supervision, maintain, inspect, test, examine, lubricate, troubleshoot and make repairs and adjustments on any part of MTA New York City Transit’s multiple-unit subway cars and subway service cars in the car shops, terminals, yards and on the road, including subway car body, electrical, electronic, mechanical and pneumatic equipment, truck equipment, body and truck brake rigging, electrical and pneumatic brake equipment, subway car bodies and associated fixtures, air conditioning and heating equipment, and electrical and electronic control and motor equipment; maintain and repair subway car washers and shop equipment; operate and maintain lifting and carrying equipment associated with the placement and removal of subway cars and subway car parts; keep records and prepare reports; and perform related work. Some of the physical activities performed by Car Inspectors and the environmental conditions they experience are: working outdoors in all weather conditions, crouching under subway cars in maintenance pits, reaching into dark spaces and making tactile inspections, making visual inspections of equipment, distinguishing colors, reading gauges and prints, climbing into and out of maintenance pits, using hand tools, hearing warnings (bell, whistle and vocal), and carrying heavy tools and equipment. Road Car Inspectors, under supervision, detect trouble on any part of MTA New York City Transit’s multiple-unit subway cars and subway service cars on the road and in terminals, including subway car body and truck equipment, subway car body and truck brake rigging, electrical and pneumatic brake equipment, and electrical and electronic control and motor equipment; make necessary repairs to keep subway cars in service or enable them to be moved to sidings or terminals; operate a motor vehicle; keep records and prepare reports; and perform related work. Some of the physical activities performed by Road Car Inspectors and the environmental conditions they experience are: working outdoors in all weather conditions, crouching under subway cars along trackways, reaching into dark spaces and making tactile inspections, making visual inspections of equipment, distinguishing colors, reading gauges and prints, using ladders to climb up to and descend from track ways, working on elevated structures, operating heavy machinery and equipment, using hand tools, hearing warnings (bell, whistle and vocal), communicating verbally with crew and passengers regarding train troubles experienced on the road, and carrying heavy tools and equipment. Special Working Conditions: Car Inspectors and Road Car Inspectors may be required to work various shifts, including nights, Saturdays, Sundays and holidays. How to Qualify: Internal Candidates: This position is open to each employee of MTA New York City Transit that by the first date of the assessment, is permanently (not provisionally) employed in the title of Maintainer's Helper - Group B working in the Division of Car Equipment, and has been permanently employed in such title for not less than one year; and is not otherwise ineligible. OR External Candidates and MTA Employees who are not employed in the eligible title listed above: When you apply, you must meet the following requirements: Some examples of acceptable experience include: aircraft/avionics technician, marine technician, power-plant technician, automotive/diesel mechanic/technician, commercial/industrial electrician, electronic systems technician, commercial/industrial HVAC technician, and elevator/escalator mechanic. 1. Three years of full-time satisfactory experience as a journey-level mechanic (i.e., a fully trained, knowledgeable, experienced, proficient and competent mechanic) working from drawings, performing either (a) the troubleshooting, repair and maintenance of large heavy duty electromechanical, electric or electronic equipment and/or machinery; or (b) the inspection, maintenance, troubleshooting and repair of multiple-unit electrical railroad cars or diesel electric locomotives; or, 2. Two years of full-time satisfactory experience at the journey level as described in paragraph “1.” above, plus completion of one of the following listed below before obtaining your journey-level experience: A. Two years of full-time experience as a mechanic’s helper, apprentice or trainee performing or assisting in the work described above; or B. Graduation from a recognized trade school or technical school with a major course of study in electromechanical, electrical or electronic technology, or a closely related field totaling at least 600 hours; or C. Graduation from a vocational high school with a major course of study in electromechanical, electrical or electronic technology, or a closely related field; or D. An associate degree in applied science, or a higher degree, from an accredited college or university in electromechanical, electrical or electronic technology or a closely related field. If you have qualifying part-time experience, it will be credited on a pro-rated basis. Some examples of unacceptable experience include: machinist; CNC machine operator; copy machine mechanic; assembler; basic electrical work, such as residential/commercial lighting and wiring; electronic bench technician; auto-body and fender mechanic; auto or truck assembly mechanic; dealership makeready mechanic; gas station attendant; salvage or junkyard mechanic; automotive specialty work, such as changing mufflers, windshield wipers, tires, oil, etc.; and repair of personal computers. The vocational high school, technical school, or trade school must be approved by a State’s Department of Education or a recognized accrediting organization. The college or university must be accredited by regional, national, professional or specialized agencies recognized as accrediting bodies by the U.S. Secretary of Education, and by the Council for Higher Education Accreditation (CHEA). Selection Method / Admission Letter: Candidates may be asked to complete an education and experience test paper and also participate in one or more of the following assessments: written, practical skills and/or structured interview. All selected candidates will be subject to a full background investigation that includes employment and education. Discrepancies may lead to dismissal. Applicants must keep their contact information (email, mailing, phone) up to date. The contact information you entered in your online profile with the MTA will be used to contact you. You can update your address and other contact information.by logging into your MTA profile or by sending an email to examsunit@nyct.com. How To Apply: If you meet the Qualification Requirements above, you can submit an online application by clicking on the "APPLY NOW" button from either the CAREERS page or from the JOB DESCRIPTION page. If you have previously applied online for other positions, enter your Username and Password. If it is your first registration, click on the CLICK HERE TO REGISTER hyperlink and enter a User Name and Password; then click on the REGISTER button. Requirements to be

Job Description Job Title: Automotive Mechanic (Track Equipment Maintainer) Last Date of Posting: Open Until Filled Authority: TA Department: Subways Division/Unit: Track Reports to: Supervisor Work Location: Various Hours of Work: Various *If you are hired into this position, you must pass the next Civil Service Exam and be hired from the resulting list for this title to obtain permanent civil service status. Compensation: The current minimum salary for Track Equipment Maintainer is $37.16 per hour for a 40-hour work week increasing to $43.72 per hour in the sixth year of service. These rates are subject to change. The benefits of this position include, but are not limited to, night and weekend salary differentials, paid holidays, vacation and sick leave, a comprehensive medical plan and a pension plan. Responsibilities: Track Equipment Maintainers, under supervision, inspect, test, maintain, alter, repair and operate electromechanical, electronic, hydraulic, and pneumatic equipment used in the construction, maintenance and repair of railroad track in MTA New York City Transit’s subway system. They maintain, repair and operate cranes, tampers, compressors, front-end loaders, engines and motors, rail saws, chain saws, payloaders, forklifts, conveyors, track lubricators, ballast regulators, snow blowers, grease pumps, and machine shop equipment; drive trucks; keep records; make computations; prepare reports; and perform related work. Some of the physical activities performed by Track Equipment Maintainers and the environmental conditions they experience are crawling under trucks and heavy equipment; working in confined spaces; working on subway and elevated tracks; lifting and carrying heavy tools and components; taking precise measurements; distinguishing colors; manually removing and installing parts and bolts in confined areas; moving out of the way of moving vehicles and heavy equipment, including trains while working on or near tracks that are in service; hearing warnings (verbal, horns, bells, and signals); and working outdoors in all weather conditions. Special Working Conditions: Track Equipment Maintainers may be required to work various shifts including nights, Saturdays, Sundays and holidays. Education and Experience Requirements: 1. Completion of a four-year full-time apprenticeship in an electro-mechanical trade recognized by the New York State Department of Labor, the U.S Department of Labor or any state apprenticeship council which is recognized by the U.S. Department of Labor; or, 2. Two years of full-time satisfactory journey-level mechanic experience (i.e., fully trained, proficient, knowledgeable, experienced and competent) in the testing, operation, maintenance, alteration and repair of the mechanical, electrical, hydraulic, and pneumatic components and systems of (A) Heavy equipment of the type used in construction or the maintenance and repair of track, such as pneumatic and hydraulic compressors, drills, pile drivers, payloaders, tractors and conveyors, including gasoline and diesel engines; or (B) Transportation vehicles such as passenger automobiles, trucks, buses, marine vessels, or aircraft. For the journey-level mechanic experience in “2” above to be credited, it must be preceded by one of the following: A. Two years of full-time satisfactory experience as a mechanic’s helper, apprentice, or trainee performing or assisting in the work described in “2” above; or B. Graduation from a recognized trade school or technical school with a major course of study in a mechanical or electrical trade, or a closely related field, totaling 600 hours; or C. Graduation from a vocational high school with a major course of study in a mechanical or electrical trade or a closely related field; or D. An A.A.S degree or higher in electro-mechanical or electronic technology, or a closely related field, from an accredited college or university. If you have qualifying part-time experience, it will be credited on a prorated basis. Some examples of acceptable experience include: maintenance and repair of pneumatic and hydraulic compressors, drills, pile drivers, payloaders, tractors and conveyors, including gasoline and diesel engines, transportation vehicles such as passenger automobiles, trucks, buses, marine vessels, or aircraft. Some examples of unacceptable experience include: auto body and fender repair; auto or truck assembly; dealership make-ready repair; fuel, oil and lube servicing; vehicle inspection; exclusive specialty replacement shop work, such as tire replacement, replacement of exhaust parts (muffler), glass, climate control parts, etc.; salvage and junkyard extraction; heavy equipment or large vehicle repair experience that does not include work on gasoline or diesel engines, electrical systems, and hydraulic systems/components; vehicle or heavy equipment assembly or junk yard work; parts supply; and vehicle or heavy equipment body work. How to Apply: If you meet the requirements above, you can submit an online application by clicking on the "APPLY NOW" button from either the CAREERS page or from the JOB DESCRIPTION page. If you have previously applied online for other positions, enter your Username and Password. If it is your first registration, click on the CLICK HERE TO REGISTER hyperlink and enter a User Name and Password; then click on the REGISTER button. Selection Method / Admission Letter: Candidates may be asked to complete an education and experience test paper and also participate in one or more of the following assessments: written, practical skills and/or structured interview. All selected candidates will be subject to a full background investigation that includes employment and education. Discrepancies may lead to dismissal. Applicants must keep their contact information (email, mailing, phone) up to date. The contact information you entered in your online profile with the MTA will be used to contact you. You can update your address and other contact information.by logging into your MTA profile or by sending an email to examsuit@nyct.com. Requirements to be Appointed: Driver License Requirement: At the time of appointment you must have: 1. A Class A or Class B Commercial Driver License (CDL) valid in the State of New York with an endorsement for hazardous materials and no disqualifying restrictions that would preclude the performance of this title; or, 2. A Motor Vehicle Driver License valid in the State of New York and a Learner Permit for a Class B CDL valid in the State of New York with an endorsement for hazardous materials and no disqualifying restrictions. If you qualify under “2” above, your appointment will be subject to the receipt of the Class B CDL valid in the State of New York, with an endorsement for hazardous materials and no disqualifying restrictions within six months of appointment. If you have serious moving violations, a license suspension or an accident record, you may be disqualified. The Class B Commercial Driver License (CDL) with an endorsement for hazardous materials and no disqualifying restrictions must be maintained for the duration of your employment in the title. Such license and/or Learner Permit must not include any restrictions which would preclude the performance of Track Equipment Maintainer work. Commercial Motor Vehicle Driving Experience in the Military or New York National Guard: If you are an active member or former member (discharged in the past year) of the military or New York National Guard and have experience driving a Commercial Motor Vehicle in the military or New York National Guard, you may be eligible for a waiver of the New York State commercial driving skills test through the New York State Department of Motor Vehicles. If you believe that you may be eligible for this waiver, you must apply for the waiver through the New York State Department of Motor Vehicles. Drug Screening Requirement: You must pass a drug screening in order to be appointed, and if appointed, you will be subject to random drug and alcohol tests for the duration of your employment. Additionally, if you have tested positive on a drug or alcohol test or had a refusal to test during preemployment or while employed by a Federal DOT-regulated employer during the applicable period, you must have completed the Substance Abuse Professional (SAP) evaluation, referral and education/treatment process required by federal law in order to be appointed to this safety-sensitive position. Residency: New York City residency is not required for this position. English Requirement: You must be able to understand and be understood in English to perform the duties and responsibilities of the position. Proof of Identity: Under the Immigration Reform and Control Act of 1986, you must be able to prove your identity and your right to obtain employment in the United States prior to employment with MTA New York City Transit. Additional Information: Probationary Period: You will be required to complete a probationary period. If you do not successfully complete the probationary period, you may be terminated. Training: You may be required to undergo a formalized training course during your probationary period. Failure to successfully complete the training course may result in termination. Equal Employment Opportunity: MTA and its subsidiary and affiliated agencies are Equal Opportunity Employers, including with respect to veteran status and individuals with disabilities. The MTA encourages qualified applicants from diverse backgrounds, experiences, and abilities, including military service members, to apply.

Job Description COMPENSATION: $22.00/hr to $25.00/hr. This position comes with an apartment in Lower East Side, New York depending on availability. WHO WE ARE: Stanton Norfolk Inc. is a division of Asian Americans for Equality, Inc. (AAFE) that manages the day-to-day operations of over 800 units of affordable housing across nearly 50 multifamily properties serving over 1,100 individuals and families in Manhattan and Queens neighborhoods, including Chinatown/Lower East Side, Flushing, and the Far Rockaways. Currently, Stanton Norfolk’s portfolio is comprised of full tax credit / affordable properties, as well as commercial spaces as part of mixed-use buildings. We pride ourselves in providing a full breadth of management services to provide quality, safe, and affordable housing; maintenance; financial reporting; and resident relations. Asian Americans for Equality (AAFE) is a 501 (c) (3) non-profit organization based in New York City. Founded in 1974 in Manhattan’s Chinatown to advocate for equal rights, AAFE has transformed in the past four decades to become one of the city’s leading housing, social service and community development organizations. AAFE advances racial, social and economic justice for Asian Americans and other systematically disadvantaged communities, guided by our experiences as Asian Americans and our commitment to civil rights. AAFE is nationally recognized as an innovative affordable housing developer and property manager; we have created and preserved more than 1,000 affordable rental units in Manhattan and Queens and provided over $400 million in mortgage financing for first-time homebuyers. Through our affiliate, Renaissance Economic Development Corporation, AAFE supports immigrant entrepreneurs, offering low-interest loans and training programs. From neighborhood offices in Chinatown and the Lower East Side (Manhattan) and Flushing and Jackson Heights (Queens) we provide an array of multilingual counseling and educational programs in support of low-income tenants, seniors and immigrant youth. AAFE strives for a more equitable city, through research, advocacy and grassroots community organizing. Summary: The Maintenance Helper will handle and perform a variety of non-technical, non-licensed mechanical, electrical maintenance, HVAC, painting, carpentry, custodial, plumbing, general repair, and other handyperson tasks related to overall building maintenance for a new mixed-use residential and commercial building in Lower Manhattan, NY. The Maintenance Helper will report to, and work under the direct supervision of the Property Manager. Responsibilities: • Performs general repairs and services in all maintenance related disciplines assigned by the Facility Manager. • Performs preventative maintenance for plumbing, electrical, and heating systems in residential units as needed. • Performs minor repairs including carpentry, painting, surface touch-ups, tiling, and flooring., • Identifies and reports any deficiencies in residential units or the building., • Changes locks, re-keys, and makes key copies as directed., • Reports all accidents and any illegal activities to management in a timely way., • Supervises any third-party contractors and utility companies as needed., • Properly documents and details completed work orders., • Completes any other tasks as assigned by the Property Coordinator., • Maintains a working relationship with tenants at all times., • Performs work with respect and professional courtesy. Qualifications: • Minimum of 5 years of experience in general maintenance, caretaking, mechanical, electrical and/or equipment and building repairs., • Attention to detail., • Positive attitude and good communication skills, both verbal and written., • Availability to work in shifts and with flexible schedules (e.g. weekends and evenings)., • Bilingual in English/Chinese is preferred., • Building maintenance certifications (i.e. Sprinkler Certificate of Fitness) or other training, is preferred. Physical Requirements: • Required to walk from floor to floor and may be required to walk outside between buildings in varying outdoor weather conditions. • Ability to move furniture; reach, lift, and carry heavy equipment, • Required to stand, bend, squat, and regularly lift up to 50 pounds through course of shift. Schedule Requirements: • Must be flexible with schedule change every quarter How we work: We believe that the people and the communities that we have the privilege to serve, deserve our very best every day. We are a results-driven organization that focuses on empowerment and impact. Stanton Norfolk employees are accountable, pragmatic, innovative and collaborative with a core strength of community service and development. We are strategic thinkers who are committed to racial equality and treating each other, and the communities we serve, with respect and dignity. This philosophy expands to the way we manage our work and the way we put our best foot forward. All employees are expected to meet the following requirements and behaviors: • Support efforts that ensure a safe and healthy work environment., • Understand and embrace the value in collaborating with people of different cultures, races, genders, ethnicities, beliefs, experiences and ideas., • An understanding of the concepts of institutional and structural racism and bias and their impact on underserved and underrepresented communities., • Maintain a positive, helpful attitude., • Enjoy your time at work! Powered by JazzHR Q8QWUVAusf

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

The Delivery Driver Helper assists our Sherwin-Williams Delivery Service ("SWDS") drivers in making deliveries to Sherwin Williams's customers and stores located in a metropolitan area.

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

Amazon Delivery Drivers - - Responsibilities: Assist driver with deliveries; Interact with customers during delivery; Deliver home goods to residences; Operate handheld scanning device.

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

Driver Helpers Wanted - Over time.

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

Driver Helpers Wanted - Over time.

Driver Helpers Wanted - Over time.

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

This position is long-term and potential for full-time hire.Pack groceries into boxes per company guidelines.Break down and cut up empty boxes to be discarded.Make deliveries with Delivery Driver and assist with unloading truck for deliveries.Standing, heavy lifting from time to time.Monday, Tuesday

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

Our delivery drivers not only make sure the customers' products arrive at their destination at the arranged times and in good condition, but they are the face of our company building lasting relationships with our customers! As a driver, helper non formula, you will assist the driver in every aspec

Work schedule includes nights and weekends.NYC Hauling is looking for a safety-conscious.This role supports garbage truck operations by manually collecting solid waste along designated routes and transporting materials to appropriate disposal sites.Job Duties Include (but are not limited to):.Ride a

SEASONAL - START DATE MID APRIL THROUGH MID SEPTEMBER.At Manhattan Beer and Beverage Distributors, our vision is to be the leading beer distributor in the market.Imagine building a business from the ground up, with nothing more than 1 truck, 4000 feet of warehouse space, 2 Beer Brands and a lot of d

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

Spare Driver Helpers are responsible for delivering some of the world's best-known brands to accounts in the local area.

We have an incredible opportunity for a dynamic Driver Helper to join our growing New York Team!.

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

The Delivery Driver Helper assists our Sherwin-Williams Delivery Service ("SWDS") drivers in making deliveries to Sherwin Williams's customers and stores located in a metropolitan area.

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th